/* Target-struct-independent code to start (run) and stop an inferior
process.
- Copyright (C) 1986-2015 Free Software Foundation, Inc.
+ Copyright (C) 1986-2017 Free Software Foundation, Inc.
This file is part of GDB.
#include "solist.h"
#include "event-loop.h"
#include "thread-fsm.h"
+#include "common/enum-flags.h"
/* Prototypes for local functions */
fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value);
}
-/* In asynchronous mode, but simulating synchronous execution. */
-
-int sync_execution = 0;
-
/* proceed and normal_stop use this to notify the user when the
inferior stopped in a different thread than it had been running
in. */
value);
}
-/* Nonzero means expecting a trace trap
- and should stop the inferior and return silently when it happens. */
-
-int stop_after_trap;
-
/* Nonzero after stop if current stack frame should be printed. */
static int stop_print_frame;
if (has_vforked
&& !non_stop /* Non-stop always resumes both branches. */
- && (!target_is_async_p () || sync_execution)
+ && current_ui->prompt_state == PROMPT_BLOCKED
&& !(follow_child || detach_fork || sched_multi))
{
/* The parent stays blocked inside the vfork syscall until the
/* Detach new forked process? */
if (detach_fork)
{
- struct cleanup *old_chain;
-
/* Before detaching from the child, remove all breakpoints
from it. If we forked, then this has already been taken
care of by infrun.c. If we vforked however, any
CORE_ADDR step_range_start = 0;
CORE_ADDR step_range_end = 0;
struct frame_id step_frame_id = { 0 };
- struct interp *command_interp = NULL;
+ struct thread_fsm *thread_fsm = NULL;
if (!non_stop)
{
step_frame_id = tp->control.step_frame_id;
exception_resume_breakpoint
= clone_momentary_breakpoint (tp->control.exception_resume_breakpoint);
- command_interp = tp->control.command_interp;
+ thread_fsm = tp->thread_fsm;
/* For now, delete the parent's sr breakpoint, otherwise,
parent/child sr breakpoints are considered duplicates,
tp->control.step_range_end = 0;
tp->control.step_frame_id = null_frame_id;
delete_exception_resume_breakpoint (tp);
- tp->control.command_interp = NULL;
+ tp->thread_fsm = NULL;
}
parent = inferior_ptid;
tp->control.step_frame_id = step_frame_id;
tp->control.exception_resume_breakpoint
= exception_resume_breakpoint;
- tp->control.command_interp = command_interp;
+ tp->thread_fsm = thread_fsm;
}
else
{
fprintf_filtered (file, _("Follow exec mode is \"%s\".\n"), value);
}
-/* EXECD_PATHNAME is assumed to be non-NULL. */
+/* EXEC_FILE_TARGET is assumed to be non-NULL. */
static void
-follow_exec (ptid_t ptid, char *execd_pathname)
+follow_exec (ptid_t ptid, char *exec_file_target)
{
struct thread_info *th, *tmp;
struct inferior *inf = current_inferior ();
int pid = ptid_get_pid (ptid);
ptid_t process_ptid;
+ char *exec_file_host;
+ struct cleanup *old_chain;
/* This is an exec event that we actually wish to pay attention to.
Refresh our symbol table to the newly exec'd program, remove any
process_ptid = pid_to_ptid (pid);
printf_unfiltered (_("%s is executing new program: %s\n"),
target_pid_to_str (process_ptid),
- execd_pathname);
+ exec_file_target);
/* We've followed the inferior through an exec. Therefore, the
inferior has essentially been killed & reborn. */
breakpoint_init_inferior (inf_execd);
- if (*gdb_sysroot != '\0')
- {
- char *name = exec_file_find (execd_pathname, NULL);
+ exec_file_host = exec_file_find (exec_file_target, NULL);
+ old_chain = make_cleanup (xfree, exec_file_host);
- execd_pathname = (char *) alloca (strlen (name) + 1);
- strcpy (execd_pathname, name);
- xfree (name);
- }
+ /* If we were unable to map the executable target pathname onto a host
+ pathname, tell the user that. Otherwise GDB's subsequent behavior
+ is confusing. Maybe it would even be better to stop at this point
+ so that the user can specify a file manually before continuing. */
+ if (exec_file_host == NULL)
+ warning (_("Could not load symbols for executable %s.\n"
+ "Do you need \"set sysroot\"?"),
+ exec_file_target);
/* Reset the shared library package. This ensures that we get a
shlib event when the child reaches "_start", at which point the
inf = add_inferior_with_spaces ();
inf->pid = pid;
- target_follow_exec (inf, execd_pathname);
+ target_follow_exec (inf, exec_file_target);
set_current_inferior (inf);
set_current_program_space (inf->pspace);
gdb_assert (current_program_space == inf->pspace);
- /* That a.out is now the one to use. */
- exec_file_attach (execd_pathname, 0);
-
- /* SYMFILE_DEFER_BP_RESET is used as the proper displacement for PIE
- (Position Independent Executable) main symbol file will get applied by
- solib_create_inferior_hook below. breakpoint_re_set would fail to insert
- the breakpoints with the zero displacement. */
+ /* Attempt to open the exec file. SYMFILE_DEFER_BP_RESET is used
+ because the proper displacement for a PIE (Position Independent
+ Executable) main symbol file will only be computed by
+ solib_create_inferior_hook below. breakpoint_re_set would fail
+ to insert the breakpoints with the zero displacement. */
+ try_open_exec_file (exec_file_host, inf, SYMFILE_DEFER_BP_RESET);
- symbol_file_add (execd_pathname,
- (inf->symfile_flags
- | SYMFILE_MAINLINE | SYMFILE_DEFER_BP_RESET),
- NULL, 0);
-
- if ((inf->symfile_flags & SYMFILE_NO_READ) == 0)
- set_initial_language ();
+ do_cleanups (old_chain);
/* If the target can specify a description, read it. Must do this
after flipping to the new executable (because the target supplied
/* Bit flags indicating what the thread needs to step over. */
-enum step_over_what
+enum step_over_what_flag
{
/* Step over a breakpoint. */
STEP_OVER_BREAKPOINT = 1,
expression. */
STEP_OVER_WATCHPOINT = 2
};
+DEF_ENUM_FLAGS_TYPE (enum step_over_what_flag, step_over_what);
/* Info about an instruction that is being stepped over. */
/* The instruction being stepped over triggers a nonsteppable
watchpoint. If true, we'll skip inserting watchpoints. */
int nonsteppable_watchpoint_p;
+
+ /* The thread's global number. */
+ int thread;
};
/* The step-over info of the location that is being stepped over.
static struct step_over_info step_over_info;
/* Record the address of the breakpoint/instruction we're currently
- stepping over. */
+ stepping over.
+ N.B. We record the aspace and address now, instead of say just the thread,
+ because when we need the info later the thread may be running. */
static void
set_step_over_info (struct address_space *aspace, CORE_ADDR address,
- int nonsteppable_watchpoint_p)
+ int nonsteppable_watchpoint_p,
+ int thread)
{
step_over_info.aspace = aspace;
step_over_info.address = address;
step_over_info.nonsteppable_watchpoint_p = nonsteppable_watchpoint_p;
+ step_over_info.thread = thread;
}
/* Called when we're not longer stepping over a breakpoint / an
step_over_info.aspace = NULL;
step_over_info.address = 0;
step_over_info.nonsteppable_watchpoint_p = 0;
+ step_over_info.thread = -1;
}
/* See infrun.h. */
/* See infrun.h. */
+int
+thread_is_stepping_over_breakpoint (int thread)
+{
+ return (step_over_info.thread != -1
+ && thread == step_over_info.thread);
+}
+
+/* See infrun.h. */
+
int
stepping_past_nonsteppable_watchpoint (void)
{
return 0;
}
+/* Return true if thread represented by PTID is doing a displaced
+ step. */
+
+static int
+displaced_step_in_progress_thread (ptid_t ptid)
+{
+ struct displaced_step_inferior_state *displaced;
+
+ gdb_assert (!ptid_equal (ptid, null_ptid));
+
+ displaced = get_displaced_stepping_state (ptid_get_pid (ptid));
+
+ return (displaced != NULL && ptid_equal (displaced->step_ptid, ptid));
+}
+
/* Return true if process PID has a thread doing a displaced step. */
static int
struct thread_info *tp = find_thread_ptid (ptid);
struct regcache *regcache = get_thread_regcache (ptid);
struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct address_space *aspace = get_regcache_aspace (regcache);
CORE_ADDR original, copy;
ULONGEST len;
struct displaced_step_closure *closure;
copy = gdbarch_displaced_step_location (gdbarch);
len = gdbarch_max_insn_length (gdbarch);
+ if (breakpoint_in_range_p (aspace, copy, len))
+ {
+ /* There's a breakpoint set in the scratch pad location range
+ (which is usually around the entry point). We'd either
+ install it before resuming, which would overwrite/corrupt the
+ scratch pad, or if it was already inserted, this displaced
+ step would overwrite it. The latter is OK in the sense that
+ we already assume that no thread is going to execute the code
+ in the scratch pad range (after initial startup) anyway, but
+ the former is unacceptable. Simply punt and fallback to
+ stepping over this breakpoint in-line. */
+ if (debug_displaced)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: breakpoint set in scratch pad. "
+ "Stepping over breakpoint in-line instead.\n");
+ }
+
+ do_cleanups (old_cleanups);
+ return -1;
+ }
+
/* Save the original contents of the copy area. */
displaced->step_saved_copy = (gdb_byte *) xmalloc (len);
ignore_cleanups = make_cleanup (free_current_contents,
{
struct displaced_step_inferior_state *displaced_state;
- if (ex.error != MEMORY_ERROR)
+ if (ex.error != MEMORY_ERROR
+ && ex.error != NOT_SUPPORTED_ERROR)
throw_exception (ex);
if (debug_infrun)
static void keep_going_pass_signal (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
static int keep_going_stepped_thread (struct thread_info *tp);
-static int thread_still_needs_step_over (struct thread_info *tp);
-static void stop_all_threads (void);
+static step_over_what thread_still_needs_step_over (struct thread_info *tp);
/* Are there any pending step-over requests? If so, run all we can
now and return true. Otherwise, return false. */
{
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
- enum step_over_what step_what;
+ step_over_what step_what;
int must_be_in_line;
+ gdb_assert (!tp->stop_requested);
+
next = thread_step_over_chain_next (tp);
/* If this inferior already has a displaced step in process,
static void
infrun_thread_ptid_changed (ptid_t old_ptid, ptid_t new_ptid)
{
- struct displaced_step_request *it;
struct displaced_step_inferior_state *displaced;
if (ptid_equal (inferior_ptid, old_ptid))
int hw_step = 1;
if (execution_direction == EXEC_FORWARD
- && gdbarch_software_single_step_p (gdbarch)
- && gdbarch_software_single_step (gdbarch, get_current_frame ()))
- {
- hw_step = 0;
- }
+ && gdbarch_software_single_step_p (gdbarch))
+ hw_step = !insert_single_step_breakpoints (gdbarch);
+
return hw_step;
}
{
struct thread_info *tp = inferior_thread ();
+ gdb_assert (!tp->stop_requested);
+
/* Install inferior's terminal modes. */
target_terminal_inferior ();
target_pass_signals ((int) GDB_SIGNAL_LAST, signal_pass);
target_resume (resume_ptid, step, sig);
+
+ target_commit_resume ();
}
/* Resume the inferior, but allow a QUIT. This is useful if the user
single-step). */
int step;
+ gdb_assert (!tp->stop_requested);
gdb_assert (!thread_is_in_step_over_chain (tp));
QUIT;
stop_all_threads ();
set_step_over_info (get_regcache_aspace (regcache),
- regcache_read_pc (regcache), 0);
+ regcache_read_pc (regcache), 0, tp->global_num);
step = maybe_software_singlestep (gdbarch, pc);
gdb_assert (!(thread_has_single_step_breakpoints_set (tp) && step));
/* Decide the set of threads to ask the target to resume. */
- if ((step || thread_has_single_step_breakpoints_set (tp))
- && tp->control.trap_expected)
+ if (tp->control.trap_expected)
{
/* We're allowing a thread to run past a breakpoint it has
- hit, by single-stepping the thread with the breakpoint
- removed. In which case, we need to single-step only this
- thread, and keep others stopped, as they can miss this
- breakpoint if allowed to run. */
+ hit, either by single-stepping the thread with the breakpoint
+ removed, or by displaced stepping, with the breakpoint inserted.
+ In the former case, we need to single-step only this thread,
+ and keep others stopped, as they can miss this breakpoint if
+ allowed to run. That's not really a problem for displaced
+ stepping, but, we still keep other threads stopped, in case
+ another thread is also stopped for a breakpoint waiting for
+ its turn in the displaced stepping queue. */
resume_ptid = inferior_ptid;
}
else
tp->control.proceed_to_finish = 0;
- tp->control.command_interp = NULL;
tp->control.stepping_command = 0;
/* Discard any remaining commands or status from previous stop. */
inferior->control.stop_soon = NO_STOP_QUIETLY;
}
- stop_after_trap = 0;
-
observer_notify_about_to_proceed ();
}
to make progress when resumed. Returns an bitwise or of enum
step_over_what bits, indicating what needs to be stepped over. */
-static int
+static step_over_what
thread_still_needs_step_over (struct thread_info *tp)
{
- struct inferior *inf = find_inferior_ptid (tp->ptid);
- int what = 0;
+ step_over_what what = 0;
if (thread_still_needs_step_over_bp (tp))
what |= STEP_OVER_BREAKPOINT;
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
struct cleanup *old_chain;
+ struct cleanup *defer_resume_cleanup;
int started;
/* If we're stopped at a fork/vfork, follow the branch set by the
if (siggnal != GDB_SIGNAL_DEFAULT)
tp->suspend.stop_signal = siggnal;
- /* Record the interpreter that issued the execution command that
- caused this thread to resume. If the top level interpreter is
- MI/async, and the execution command was a CLI command
- (next/step/etc.), we'll want to print stop event output to the MI
- console channel (the stepped-to line, etc.), as if the user
- entered the execution command on a real GDB console. */
- tp->control.command_interp = command_interp ();
-
resume_ptid = user_visible_resume_ptid (tp->control.stepping_command);
/* If an exception is thrown from this point on, make sure to
until the target stops again. */
tp->prev_pc = regcache_read_pc (regcache);
+ defer_resume_cleanup = make_cleanup_defer_target_commit_resume ();
+
started = start_step_over ();
if (step_over_info_valid_p ())
error (_("Command aborted."));
}
+ do_cleanups (defer_resume_cleanup);
+ target_commit_resume ();
+
discard_cleanups (old_chain);
/* Tell the event loop to wait for it to stop. If the target
static void process_event_stop_test (struct execution_control_state *ecs);
static int switch_back_to_stepped_thread (struct execution_control_state *ecs);
-/* Callback for iterate over threads. If the thread is stopped, but
- the user/frontend doesn't know about that yet, go through
- normal_stop, as if the thread had just stopped now. ARG points at
- a ptid. If PTID is MINUS_ONE_PTID, applies to all threads. If
- ptid_is_pid(PTID) is true, applies to all threads of the process
- pointed at by PTID. Otherwise, apply only to the thread pointed by
- PTID. */
-
-static int
-infrun_thread_stop_requested_callback (struct thread_info *info, void *arg)
-{
- ptid_t ptid = * (ptid_t *) arg;
-
- if ((ptid_equal (info->ptid, ptid)
- || ptid_equal (minus_one_ptid, ptid)
- || (ptid_is_pid (ptid)
- && ptid_get_pid (ptid) == ptid_get_pid (info->ptid)))
- && is_running (info->ptid)
- && !is_executing (info->ptid))
- {
- struct cleanup *old_chain;
- struct execution_control_state ecss;
- struct execution_control_state *ecs = &ecss;
-
- memset (ecs, 0, sizeof (*ecs));
-
- old_chain = make_cleanup_restore_current_thread ();
-
- overlay_cache_invalid = 1;
- /* Flush target cache before starting to handle each event.
- Target was running and cache could be stale. This is just a
- heuristic. Running threads may modify target memory, but we
- don't get any event. */
- target_dcache_invalidate ();
-
- /* Go through handle_inferior_event/normal_stop, so we always
- have consistent output as if the stop event had been
- reported. */
- ecs->ptid = info->ptid;
- ecs->event_thread = info;
- ecs->ws.kind = TARGET_WAITKIND_STOPPED;
- ecs->ws.value.sig = GDB_SIGNAL_0;
-
- handle_inferior_event (ecs);
-
- if (!ecs->wait_some_more)
- {
- /* Cancel any running execution command. */
- thread_cancel_execution_command (info);
-
- normal_stop ();
- }
-
- do_cleanups (old_chain);
- }
-
- return 0;
-}
-
/* This function is attached as a "thread_stop_requested" observer.
Cleanup local state that assumed the PTID was to be resumed, and
report the stop to the frontend. */
{
struct thread_info *tp;
- /* PTID was requested to stop. Remove matching threads from the
- step-over queue, so we don't try to resume them
- automatically. */
+ /* PTID was requested to stop. If the thread was already stopped,
+ but the user/frontend doesn't know about that yet (e.g., the
+ thread had been temporarily paused for some step-over), set up
+ for reporting the stop now. */
ALL_NON_EXITED_THREADS (tp)
if (ptid_match (tp->ptid, ptid))
{
+ if (tp->state != THREAD_RUNNING)
+ continue;
+ if (tp->executing)
+ continue;
+
+ /* Remove matching threads from the step-over queue, so
+ start_step_over doesn't try to resume them
+ automatically. */
if (thread_is_in_step_over_chain (tp))
thread_step_over_chain_remove (tp);
- }
- iterate_over_threads (infrun_thread_stop_requested_callback, &ptid);
+ /* If the thread is stopped, but the user/frontend doesn't
+ know about that yet, queue a pending event, as if the
+ thread had just stopped now. Unless the thread already had
+ a pending event. */
+ if (!tp->suspend.waitstatus_pending_p)
+ {
+ tp->suspend.waitstatus_pending_p = 1;
+ tp->suspend.waitstatus.kind = TARGET_WAITKIND_STOPPED;
+ tp->suspend.waitstatus.value.sig = GDB_SIGNAL_0;
+ }
+
+ /* Clear the inline-frame state, since we're re-processing the
+ stop. */
+ clear_inline_frame_state (tp->ptid);
+
+ /* If this thread was paused because some other thread was
+ doing an inline-step over, let that finish first. Once
+ that happens, we'll restart all threads and consume pending
+ stop events then. */
+ if (step_over_info_valid_p ())
+ continue;
+
+ /* Otherwise we can process the (new) pending event now. Set
+ it so this pending event is considered by
+ do_target_wait. */
+ tp->resumed = 1;
+ }
}
static void
const struct target_waitstatus *ws)
{
char *status_string = target_waitstatus_to_string (ws);
- struct ui_file *tmp_stream = mem_fileopen ();
- char *text;
+ string_file stb;
/* The text is split over several lines because it was getting too long.
Call fprintf_unfiltered (gdb_stdlog) once so that the text is still
output as a unit; we want only one timestamp printed if debug_timestamp
is set. */
- fprintf_unfiltered (tmp_stream,
- "infrun: target_wait (%d.%ld.%ld",
- ptid_get_pid (waiton_ptid),
- ptid_get_lwp (waiton_ptid),
- ptid_get_tid (waiton_ptid));
+ stb.printf ("infrun: target_wait (%d.%ld.%ld",
+ ptid_get_pid (waiton_ptid),
+ ptid_get_lwp (waiton_ptid),
+ ptid_get_tid (waiton_ptid));
if (ptid_get_pid (waiton_ptid) != -1)
- fprintf_unfiltered (tmp_stream,
- " [%s]", target_pid_to_str (waiton_ptid));
- fprintf_unfiltered (tmp_stream, ", status) =\n");
- fprintf_unfiltered (tmp_stream,
- "infrun: %d.%ld.%ld [%s],\n",
- ptid_get_pid (result_ptid),
- ptid_get_lwp (result_ptid),
- ptid_get_tid (result_ptid),
- target_pid_to_str (result_ptid));
- fprintf_unfiltered (tmp_stream,
- "infrun: %s\n",
- status_string);
-
- text = ui_file_xstrdup (tmp_stream, NULL);
+ stb.printf (" [%s]", target_pid_to_str (waiton_ptid));
+ stb.printf (", status) =\n");
+ stb.printf ("infrun: %d.%ld.%ld [%s],\n",
+ ptid_get_pid (result_ptid),
+ ptid_get_lwp (result_ptid),
+ ptid_get_tid (result_ptid),
+ target_pid_to_str (result_ptid));
+ stb.printf ("infrun: %s\n", status_string);
/* This uses %s in part to handle %'s in the text, but also to avoid
a gcc error: the format attribute requires a string literal. */
- fprintf_unfiltered (gdb_stdlog, "%s", text);
+ fprintf_unfiltered (gdb_stdlog, "%s", stb.c_str ());
xfree (status_string);
- xfree (text);
- ui_file_delete (tmp_stream);
}
/* Select a thread at random, out of those which are resumed and have
static void
reinstall_readline_callback_handler_cleanup (void *arg)
{
- if (!interpreter_async)
+ struct ui *ui = current_ui;
+
+ if (!ui->async)
{
/* We're not going back to the top level event loop yet. Don't
install the readline callback, as it'd prep the terminal,
return;
}
- if (async_command_editing_p && !sync_execution)
+ if (ui->command_editing && ui->prompt_state != PROMPT_BLOCKED)
gdb_rl_callback_handler_reinstall ();
}
struct thread_info *thr = ecs->event_thread;
if (thr != NULL && thr->thread_fsm != NULL)
- thread_fsm_clean_up (thr->thread_fsm);
+ thread_fsm_clean_up (thr->thread_fsm, thr);
if (!non_stop)
{
continue;
switch_to_thread (thr->ptid);
- thread_fsm_clean_up (thr->thread_fsm);
+ thread_fsm_clean_up (thr->thread_fsm, thr);
}
if (ecs->event_thread != NULL)
}
}
-/* A cleanup that restores the execution direction to the value saved
- in *ARG. */
+/* Helper for all_uis_check_sync_execution_done that works on the
+ current UI. */
static void
-restore_execution_direction (void *arg)
+check_curr_ui_sync_execution_done (void)
+{
+ struct ui *ui = current_ui;
+
+ if (ui->prompt_state == PROMPT_NEEDED
+ && ui->async
+ && !gdb_in_secondary_prompt_p (ui))
+ {
+ target_terminal_ours ();
+ observer_notify_sync_execution_done ();
+ ui_register_input_event_handler (ui);
+ }
+}
+
+/* See infrun.h. */
+
+void
+all_uis_check_sync_execution_done (void)
{
- enum exec_direction_kind *save_exec_dir = (enum exec_direction_kind *) arg;
+ SWITCH_THRU_ALL_UIS ()
+ {
+ check_curr_ui_sync_execution_done ();
+ }
+}
+
+/* See infrun.h. */
- execution_direction = *save_exec_dir;
+void
+all_uis_on_sync_execution_starting (void)
+{
+ SWITCH_THRU_ALL_UIS ()
+ {
+ if (current_ui->prompt_state == PROMPT_NEEDED)
+ async_disable_stdin ();
+ }
}
/* Asynchronous version of wait_for_inferior. It is called by the
struct execution_control_state *ecs = &ecss;
struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
struct cleanup *ts_old_chain;
- int was_sync = sync_execution;
- enum exec_direction_kind save_exec_dir = execution_direction;
int cmd_done = 0;
ptid_t waiton_ptid = minus_one_ptid;
memset (ecs, 0, sizeof (*ecs));
+ /* Events are always processed with the main UI as current UI. This
+ way, warnings, debug output, etc. are always consistently sent to
+ the main console. */
+ scoped_restore save_ui = make_scoped_restore (¤t_ui, main_ui);
+
/* End up with readline processing input, if necessary. */
make_cleanup (reinstall_readline_callback_handler_cleanup, NULL);
event. */
target_dcache_invalidate ();
- make_cleanup (restore_execution_direction, &save_exec_dir);
- execution_direction = target_execution_direction ();
+ scoped_restore save_exec_dir
+ = make_scoped_restore (&execution_direction, target_execution_direction ());
ecs->ptid = do_target_wait (waiton_ptid, &ecs->ws,
target_can_async_p () ? TARGET_WNOHANG : 0);
struct thread_fsm *thread_fsm = thr->thread_fsm;
if (thread_fsm != NULL)
- should_stop = thread_fsm_should_stop (thread_fsm);
+ should_stop = thread_fsm_should_stop (thread_fsm, thr);
}
if (!should_stop)
/* Revert thread and frame. */
do_cleanups (old_chain);
- /* If the inferior was in sync execution mode, and now isn't,
- restore the prompt (a synchronous execution command has finished,
- and we're ready for input). */
- if (interpreter_async && was_sync && !sync_execution)
- observer_notify_sync_execution_done ();
+ /* If a UI was in sync execution mode, and now isn't, restore its
+ prompt (a synchronous execution command has finished, and we're
+ ready for input). */
+ all_uis_check_sync_execution_done ();
if (cmd_done
- && !was_sync
&& exec_done_display_p
&& (ptid_equal (inferior_ptid, null_ptid)
|| !is_running (inferior_ptid)))
/* Set the cached copy of the last ptid/waitstatus. */
-static void
+void
set_last_target_status (ptid_t ptid, struct target_waitstatus status)
{
target_last_wait_ptid = ptid;
return 0;
}
+/* If the event thread has the stop requested flag set, pretend it
+ stopped for a GDB_SIGNAL_0 (i.e., as if it stopped due to
+ target_stop). */
+
+static bool
+handle_stop_requested (struct execution_control_state *ecs)
+{
+ if (ecs->event_thread->stop_requested)
+ {
+ ecs->ws.kind = TARGET_WAITKIND_STOPPED;
+ ecs->ws.value.sig = GDB_SIGNAL_0;
+ handle_signal_stop (ecs);
+ return true;
+ }
+ return false;
+}
+
/* Auxiliary function that handles syscall entry/return events.
It returns 1 if the inferior should keep going (and GDB
should ignore the event), or 0 if the event deserves to be
= bpstat_stop_status (get_regcache_aspace (regcache),
stop_pc, ecs->ptid, &ecs->ws);
+ if (handle_stop_requested (ecs))
+ return 0;
+
if (bpstat_causes_stop (ecs->event_thread->control.stop_bpstat))
{
/* Catchpoint hit. */
}
}
+ if (handle_stop_requested (ecs))
+ return 0;
+
/* If no catchpoint triggered for this, then keep going. */
keep_going (ecs);
return 1;
}
}
-/* Stop all threads. */
+/* A cleanup that disables thread create/exit events. */
static void
+disable_thread_events (void *arg)
+{
+ target_thread_events (0);
+}
+
+/* See infrun.h. */
+
+void
stop_all_threads (void)
{
/* We may need multiple passes to discover all threads. */
entry_ptid = inferior_ptid;
old_chain = make_cleanup (switch_to_thread_cleanup, &entry_ptid);
+ target_thread_events (1);
+ make_cleanup (disable_thread_events, NULL);
+
/* Request threads to stop, and then wait for the stops. Because
threads we already know about can spawn more threads while we're
trying to stop them, and we only learn about new threads when we
{
/* All resumed threads exited. */
}
- else if (ws.kind == TARGET_WAITKIND_EXITED
+ else if (ws.kind == TARGET_WAITKIND_THREAD_EXITED
+ || ws.kind == TARGET_WAITKIND_EXITED
|| ws.kind == TARGET_WAITKIND_SIGNALLED)
{
if (debug_infrun)
}
else
{
+ struct inferior *inf;
+
t = find_thread_ptid (event_ptid);
if (t == NULL)
t = add_thread (event_ptid);
t->resumed = 0;
t->control.may_range_step = 0;
+ /* This may be the first time we see the inferior report
+ a stop. */
+ inf = find_inferior_ptid (event_ptid);
+ if (inf->needs_setup)
+ {
+ switch_to_thread_no_regs (t);
+ setup_inferior (0);
+ }
+
if (ws.kind == TARGET_WAITKIND_STOPPED
&& ws.value.sig == GDB_SIGNAL_0)
{
{
enum gdb_signal sig;
struct regcache *regcache;
- struct address_space *aspace;
if (debug_infrun)
{
fprintf_unfiltered (gdb_stdlog, "infrun: stop_all_threads done\n");
}
+/* Handle a TARGET_WAITKIND_NO_RESUMED event. */
+
+static int
+handle_no_resumed (struct execution_control_state *ecs)
+{
+ struct inferior *inf;
+ struct thread_info *thread;
+
+ if (target_can_async_p ())
+ {
+ struct ui *ui;
+ int any_sync = 0;
+
+ ALL_UIS (ui)
+ {
+ if (ui->prompt_state == PROMPT_BLOCKED)
+ {
+ any_sync = 1;
+ break;
+ }
+ }
+ if (!any_sync)
+ {
+ /* There were no unwaited-for children left in the target, but,
+ we're not synchronously waiting for events either. Just
+ ignore. */
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(ignoring: bg)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Otherwise, if we were running a synchronous execution command, we
+ may need to cancel it and give the user back the terminal.
+
+ In non-stop mode, the target can't tell whether we've already
+ consumed previous stop events, so it can end up sending us a
+ no-resumed event like so:
+
+ #0 - thread 1 is left stopped
+
+ #1 - thread 2 is resumed and hits breakpoint
+ -> TARGET_WAITKIND_STOPPED
+
+ #2 - thread 3 is resumed and exits
+ this is the last resumed thread, so
+ -> TARGET_WAITKIND_NO_RESUMED
+
+ #3 - gdb processes stop for thread 2 and decides to re-resume
+ it.
+
+ #4 - gdb processes the TARGET_WAITKIND_NO_RESUMED event.
+ thread 2 is now resumed, so the event should be ignored.
+
+ IOW, if the stop for thread 2 doesn't end a foreground command,
+ then we need to ignore the following TARGET_WAITKIND_NO_RESUMED
+ event. But it could be that the event meant that thread 2 itself
+ (or whatever other thread was the last resumed thread) exited.
+
+ To address this we refresh the thread list and check whether we
+ have resumed threads _now_. In the example above, this removes
+ thread 3 from the thread list. If thread 2 was re-resumed, we
+ ignore this event. If we find no thread resumed, then we cancel
+ the synchronous command show "no unwaited-for " to the user. */
+ update_thread_list ();
+
+ ALL_NON_EXITED_THREADS (thread)
+ {
+ if (thread->executing
+ || thread->suspend.waitstatus_pending_p)
+ {
+ /* There were no unwaited-for children left in the target at
+ some point, but there are now. Just ignore. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(ignoring: found resumed)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Note however that we may find no resumed thread because the whole
+ process exited meanwhile (thus updating the thread list results
+ in an empty thread list). In this case we know we'll be getting
+ a process exit event shortly. */
+ ALL_INFERIORS (inf)
+ {
+ if (inf->pid == 0)
+ continue;
+
+ thread = any_live_thread_of_process (inf->pid);
+ if (thread == NULL)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(expect process exit)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Go ahead and report the event. */
+ return 0;
+}
+
/* Given an execution control state that has been freshly filled in by
an event from the inferior, figure out what it means and take
appropriate action.
return;
}
- if (ecs->ws.kind == TARGET_WAITKIND_NO_RESUMED
- && target_can_async_p () && !sync_execution)
+ if (ecs->ws.kind == TARGET_WAITKIND_THREAD_EXITED)
{
- /* There were no unwaited-for children left in the target, but,
- we're not synchronously waiting for events either. Just
- ignore. Otherwise, if we were running a synchronous
- execution command, we need to cancel it and give the user
- back the terminal. */
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: TARGET_WAITKIND_NO_RESUMED (ignoring)\n");
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_THREAD_EXITED\n");
prepare_to_wait (ecs);
return;
}
+ if (ecs->ws.kind == TARGET_WAITKIND_NO_RESUMED
+ && handle_no_resumed (ecs))
+ return;
+
/* Cache the last pid/waitstatus. */
set_last_target_status (ecs->ptid, ecs->ws);
= bpstat_stop_status (get_regcache_aspace (regcache),
stop_pc, ecs->ptid, &ecs->ws);
+ if (handle_stop_requested (ecs))
+ return;
+
if (bpstat_causes_stop (ecs->event_thread->control.stop_bpstat))
{
/* A catchpoint triggered. */
case TARGET_WAITKIND_SPURIOUS:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n");
+ if (handle_stop_requested (ecs))
+ return;
if (!ptid_equal (ecs->ptid, inferior_ptid))
context_switch (ecs->ptid);
resume (GDB_SIGNAL_0);
prepare_to_wait (ecs);
return;
+ case TARGET_WAITKIND_THREAD_CREATED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_THREAD_CREATED\n");
+ if (handle_stop_requested (ecs))
+ return;
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
+ if (!switch_back_to_stepped_thread (ecs))
+ keep_going (ecs);
+ return;
+
case TARGET_WAITKIND_EXITED:
case TARGET_WAITKIND_SIGNALLED:
if (debug_infrun)
}
gdb_flush (gdb_stdout);
- target_mourn_inferior ();
+ target_mourn_inferior (inferior_ptid);
stop_print_frame = 0;
stop_waiting (ecs);
return;
{
struct regcache *regcache = get_thread_regcache (ecs->ptid);
struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct displaced_step_inferior_state *displaced
- = get_displaced_stepping_state (ptid_get_pid (ecs->ptid));
/* If checking displaced stepping is supported, and thread
ecs->ptid is displaced stepping. */
- if (displaced && ptid_equal (displaced->step_ptid, ecs->ptid))
+ if (displaced_step_in_progress_thread (ecs->ptid))
{
struct inferior *parent_inf
= find_inferior_ptid (ecs->ptid);
if (ecs->ws.kind == TARGET_WAITKIND_FORKED)
{
+ struct displaced_step_inferior_state *displaced
+ = get_displaced_stepping_state (ptid_get_pid (ecs->ptid));
+
/* Restore scratch pad for child process. */
displaced_step_restore (displaced, ecs->ws.value.related_pid);
}
= bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
stop_pc, ecs->ptid, &ecs->ws);
+ if (handle_stop_requested (ecs))
+ return;
+
/* If no catchpoint triggered for this, then keep going. Note
that we're interested in knowing the bpstat actually causes a
stop, not just if it may explain the signal. Software
parent = ecs->ptid;
child = ecs->ws.value.related_pid;
+ /* At this point, the parent is marked running, and the
+ child is marked stopped. */
+
+ /* If not resuming the parent, mark it stopped. */
+ if (follow_child && !detach_fork && !non_stop && !sched_multi)
+ set_running (parent, 0);
+
+ /* If resuming the child, mark it running. */
+ if (follow_child || (!detach_fork && (non_stop || sched_multi)))
+ set_running (child, 1);
+
/* In non-stop mode, also resume the other branch. */
if (!detach_fork && (non_stop
|| (sched_multi && target_is_non_stop_p ())))
current_inferior ()->waiting_for_vfork_done = 0;
current_inferior ()->pspace->breakpoints_not_allowed = 0;
+
+ if (handle_stop_requested (ecs))
+ return;
+
/* This also takes care of reinserting breakpoints in the
previously locked inferior. */
keep_going (ecs);
xfree (ecs->ws.value.execd_pathname);
ecs->ws.value.execd_pathname = NULL;
+ if (handle_stop_requested (ecs))
+ return;
+
/* If no catchpoint triggered for this, then keep going. */
if (!bpstat_causes_stop (ecs->event_thread->control.stop_bpstat))
{
case TARGET_WAITKIND_STOPPED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n");
- ecs->event_thread->suspend.stop_signal = ecs->ws.value.sig;
handle_signal_stop (ecs);
return;
delete_just_stopped_threads_single_step_breakpoints ();
stop_pc = regcache_read_pc (get_thread_regcache (inferior_ptid));
+
+ if (handle_stop_requested (ecs))
+ return;
+
observer_notify_no_history ();
stop_waiting (ecs);
return;
restart_threads (struct thread_info *event_thread)
{
struct thread_info *tp;
- struct thread_info *step_over = NULL;
/* In case the instruction just stepped spawned a new thread. */
update_thread_list ();
continue;
}
+ gdb_assert (!tp->stop_requested);
+
/* If some thread needs to start a step-over at this point, it
should still be in the step-over queue, and thus skipped
above. */
back an event. */
gdb_assert (ecs->event_thread->control.trap_expected);
- if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
- clear_step_over_info ();
+ clear_step_over_info ();
}
if (!target_is_non_stop_p ())
gdb_assert (ecs->ws.kind == TARGET_WAITKIND_STOPPED);
+ ecs->event_thread->suspend.stop_signal = ecs->ws.value.sig;
+
/* Do we need to clean up the state of a thread that has
completed a displaced single-step? (Doing so usually affects
the PC, so do it here, before we set stop_pc.) */
return;
}
- if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
- && stop_after_trap)
- {
- if (!ptid_equal (ecs->ptid, inferior_ptid))
- context_switch (ecs->ptid);
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
- stop_print_frame = 0;
- stop_waiting (ecs);
- return;
- }
-
/* This originates from attach_command(). We need to overwrite
the stop_signal here, because some kernels don't ignore a
SIGSTOP in a subsequent ptrace(PTRACE_CONT,SIGSTOP) call.
context_switch (ecs->ptid);
if (deprecated_context_hook)
- deprecated_context_hook (pid_to_thread_id (ecs->ptid));
+ deprecated_context_hook (ptid_to_global_thread_id (ecs->ptid));
}
/* At this point, get hold of the now-current thread's frame. */
if (random_signal)
random_signal = !stopped_by_watchpoint;
+ /* Always stop if the user explicitly requested this thread to
+ remain stopped. */
+ if (ecs->event_thread->stop_requested)
+ {
+ random_signal = 1;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: user-requested stop\n");
+ }
+
/* For the program's own signals, act according to
the signal handling tables. */
&& ecs->event_thread->control.trap_expected
&& ecs->event_thread->control.step_resume_breakpoint == NULL)
{
- int was_in_line;
-
/* We were just starting a new sequence, attempting to
single-step off of a breakpoint and expecting a SIGTRAP.
Instead this signal arrives. This signal will take us out
"infrun: signal arrived while stepping over "
"breakpoint\n");
- was_in_line = step_over_info_valid_p ();
- clear_step_over_info ();
insert_hp_step_resume_breakpoint_at_frame (frame);
ecs->event_thread->step_after_step_resume_breakpoint = 1;
/* Reset trap_expected to ensure breakpoints are re-inserted. */
ecs->event_thread->control.trap_expected = 0;
- if (target_is_non_stop_p ())
- {
- /* Either "set non-stop" is "on", or the target is
- always in non-stop mode. In this case, we have a bit
- more work to do. Resume the current thread, and if
- we had paused all threads, restart them while the
- signal handler runs. */
- keep_going (ecs);
-
- if (was_in_line)
- {
- restart_threads (ecs->event_thread);
- }
- else if (debug_infrun)
- {
- fprintf_unfiltered (gdb_stdlog,
- "infrun: no need to restart threads\n");
- }
- return;
- }
-
/* If we were nexting/stepping some other thread, switch to
it, so that we don't continue it, losing control. */
if (!switch_back_to_stepped_thread (ecs))
keep_going_stepped_thread (struct thread_info *tp)
{
struct frame_info *frame;
- struct gdbarch *gdbarch;
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
stop_pc = regcache_read_pc (get_thread_regcache (tp->ptid));
frame = get_current_frame ();
- gdbarch = get_frame_arch (frame);
/* If the PC of the thread we were trying to single-step has
changed, then that thread has trapped or been signaled, but the
/* set_momentary_breakpoint_at_pc invalidates FRAME. */
frame = NULL;
- bp->thread = tp->num;
+ bp->thread = tp->global_num;
inferior_thread ()->control.exception_resume_breakpoint = bp;
}
}
bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
handler, bp_exception_resume);
- bp->thread = tp->num;
+ bp->thread = tp->global_num;
inferior_thread ()->control.exception_resume_breakpoint = bp;
}
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stop_waiting\n");
- clear_step_over_info ();
-
/* Let callers know we don't want to wait for the inferior anymore. */
ecs->wait_some_more = 0;
struct regcache *regcache = get_current_regcache ();
int remove_bp;
int remove_wps;
- enum step_over_what step_what;
+ step_over_what step_what;
/* Either the trap was not expected, but we are continuing
anyway (if we got a signal, the user asked it be passed to
&& (remove_wps || !use_displaced_stepping (ecs->event_thread)))
{
set_step_over_info (get_regcache_aspace (regcache),
- regcache_read_pc (regcache), remove_wps);
+ regcache_read_pc (regcache), remove_wps,
+ ecs->event_thread->global_num);
}
else if (remove_wps)
- set_step_over_info (NULL, 0, remove_wps);
+ set_step_over_info (NULL, 0, remove_wps, -1);
/* If we now need to do an in-line step-over, we need to stop
all other threads. Note this must be done before
{
/* For CLI-like interpreters, print nothing. */
- if (ui_out_is_mi_like_p (uiout))
+ if (uiout->is_mi_like_p ())
{
- ui_out_field_string (uiout, "reason",
+ uiout->field_string ("reason",
async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
}
}
print_signal_exited_reason (struct ui_out *uiout, enum gdb_signal siggnal)
{
annotate_signalled ();
- if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string
- (uiout, "reason", async_reason_lookup (EXEC_ASYNC_EXITED_SIGNALLED));
- ui_out_text (uiout, "\nProgram terminated with signal ");
+ if (uiout->is_mi_like_p ())
+ uiout->field_string
+ ("reason", async_reason_lookup (EXEC_ASYNC_EXITED_SIGNALLED));
+ uiout->text ("\nProgram terminated with signal ");
annotate_signal_name ();
- ui_out_field_string (uiout, "signal-name",
+ uiout->field_string ("signal-name",
gdb_signal_to_name (siggnal));
annotate_signal_name_end ();
- ui_out_text (uiout, ", ");
+ uiout->text (", ");
annotate_signal_string ();
- ui_out_field_string (uiout, "signal-meaning",
+ uiout->field_string ("signal-meaning",
gdb_signal_to_string (siggnal));
annotate_signal_string_end ();
- ui_out_text (uiout, ".\n");
- ui_out_text (uiout, "The program no longer exists.\n");
+ uiout->text (".\n");
+ uiout->text ("The program no longer exists.\n");
}
void
annotate_exited (exitstatus);
if (exitstatus)
{
- if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason",
- async_reason_lookup (EXEC_ASYNC_EXITED));
- ui_out_text (uiout, "[Inferior ");
- ui_out_text (uiout, plongest (inf->num));
- ui_out_text (uiout, " (");
- ui_out_text (uiout, pidstr);
- ui_out_text (uiout, ") exited with code ");
- ui_out_field_fmt (uiout, "exit-code", "0%o", (unsigned int) exitstatus);
- ui_out_text (uiout, "]\n");
+ if (uiout->is_mi_like_p ())
+ uiout->field_string ("reason", async_reason_lookup (EXEC_ASYNC_EXITED));
+ uiout->text ("[Inferior ");
+ uiout->text (plongest (inf->num));
+ uiout->text (" (");
+ uiout->text (pidstr);
+ uiout->text (") exited with code ");
+ uiout->field_fmt ("exit-code", "0%o", (unsigned int) exitstatus);
+ uiout->text ("]\n");
}
else
{
- if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string
- (uiout, "reason", async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
- ui_out_text (uiout, "[Inferior ");
- ui_out_text (uiout, plongest (inf->num));
- ui_out_text (uiout, " (");
- ui_out_text (uiout, pidstr);
- ui_out_text (uiout, ") exited normally]\n");
+ if (uiout->is_mi_like_p ())
+ uiout->field_string
+ ("reason", async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
+ uiout->text ("[Inferior ");
+ uiout->text (plongest (inf->num));
+ uiout->text (" (");
+ uiout->text (pidstr);
+ uiout->text (") exited normally]\n");
}
}
+/* Some targets/architectures can do extra processing/display of
+ segmentation faults. E.g., Intel MPX boundary faults.
+ Call the architecture dependent function to handle the fault. */
+
+static void
+handle_segmentation_fault (struct ui_out *uiout)
+{
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+
+ if (gdbarch_handle_segmentation_fault_p (gdbarch))
+ gdbarch_handle_segmentation_fault (gdbarch, uiout);
+}
+
void
print_signal_received_reason (struct ui_out *uiout, enum gdb_signal siggnal)
{
+ struct thread_info *thr = inferior_thread ();
+
annotate_signal ();
- if (siggnal == GDB_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
+ if (uiout->is_mi_like_p ())
+ ;
+ else if (show_thread_that_caused_stop ())
{
- struct thread_info *t = inferior_thread ();
+ const char *name;
+
+ uiout->text ("\nThread ");
+ uiout->field_fmt ("thread-id", "%s", print_thread_id (thr));
- ui_out_text (uiout, "\n[");
- ui_out_field_string (uiout, "thread-name",
- target_pid_to_str (t->ptid));
- ui_out_field_fmt (uiout, "thread-id", "] #%d", t->num);
- ui_out_text (uiout, " stopped");
+ name = thr->name != NULL ? thr->name : target_thread_name (thr);
+ if (name != NULL)
+ {
+ uiout->text (" \"");
+ uiout->field_fmt ("name", "%s", name);
+ uiout->text ("\"");
+ }
}
+ else
+ uiout->text ("\nProgram");
+
+ if (siggnal == GDB_SIGNAL_0 && !uiout->is_mi_like_p ())
+ uiout->text (" stopped");
else
{
- ui_out_text (uiout, "\nProgram received signal ");
+ uiout->text (" received signal ");
annotate_signal_name ();
- if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string
- (uiout, "reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
- ui_out_field_string (uiout, "signal-name",
- gdb_signal_to_name (siggnal));
+ if (uiout->is_mi_like_p ())
+ uiout->field_string
+ ("reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
+ uiout->field_string ("signal-name", gdb_signal_to_name (siggnal));
annotate_signal_name_end ();
- ui_out_text (uiout, ", ");
+ uiout->text (", ");
annotate_signal_string ();
- ui_out_field_string (uiout, "signal-meaning",
- gdb_signal_to_string (siggnal));
+ uiout->field_string ("signal-meaning", gdb_signal_to_string (siggnal));
+
+ if (siggnal == GDB_SIGNAL_SEGV)
+ handle_segmentation_fault (uiout);
+
annotate_signal_string_end ();
}
- ui_out_text (uiout, ".\n");
+ uiout->text (".\n");
}
void
print_no_history_reason (struct ui_out *uiout)
{
- ui_out_text (uiout, "\nNo more reverse-execution history.\n");
+ uiout->text ("\nNo more reverse-execution history.\n");
}
/* Print current location without a level number, if we have changed
print_stack_frame (get_selected_frame (NULL), 0, source_flag, 1);
}
-/* Cleanup that restores a previous current uiout. */
-
-static void
-restore_current_uiout_cleanup (void *arg)
-{
- struct ui_out *saved_uiout = (struct ui_out *) arg;
-
- current_uiout = saved_uiout;
-}
-
/* See infrun.h. */
void
print_stop_event (struct ui_out *uiout)
{
- struct cleanup *old_chain;
struct target_waitstatus last;
ptid_t last_ptid;
struct thread_info *tp;
get_last_target_status (&last_ptid, &last);
- old_chain = make_cleanup (restore_current_uiout_cleanup, current_uiout);
- current_uiout = uiout;
-
- print_stop_location (&last);
+ {
+ scoped_restore save_uiout = make_scoped_restore (¤t_uiout, uiout);
- /* Display the auto-display expressions. */
- do_displays ();
+ print_stop_location (&last);
- do_cleanups (old_chain);
+ /* Display the auto-display expressions. */
+ do_displays ();
+ }
tp = inferior_thread ();
if (tp->thread_fsm != NULL
&& last.kind != TARGET_WAITKIND_EXITED
&& last.kind != TARGET_WAITKIND_NO_RESUMED)
{
- target_terminal_ours_for_output ();
- printf_filtered (_("[Switching to %s]\n"),
- target_pid_to_str (inferior_ptid));
- annotate_thread_changed ();
+ SWITCH_THRU_ALL_UIS ()
+ {
+ target_terminal_ours_for_output ();
+ printf_filtered (_("[Switching to %s]\n"),
+ target_pid_to_str (inferior_ptid));
+ annotate_thread_changed ();
+ }
previous_inferior_ptid = inferior_ptid;
}
if (last.kind == TARGET_WAITKIND_NO_RESUMED)
{
- gdb_assert (sync_execution || !target_can_async_p ());
-
- target_terminal_ours_for_output ();
- printf_filtered (_("No unwaited-for children left.\n"));
+ SWITCH_THRU_ALL_UIS ()
+ if (current_ui->prompt_state == PROMPT_BLOCKED)
+ {
+ target_terminal_ours_for_output ();
+ printf_filtered (_("No unwaited-for children left.\n"));
+ }
}
/* Note: this depends on the update_thread_list call above. */
if (stopped_by_random_signal)
disable_current_display ();
- target_terminal_ours ();
- async_enable_stdin ();
+ SWITCH_THRU_ALL_UIS ()
+ {
+ async_enable_stdin ();
+ }
/* Let the user/frontend see the threads as stopped. */
do_cleanups (old_chain);
"to change these tables.\n"));
}
-/* Check if it makes sense to read $_siginfo from the current thread
- at this point. If not, throw an error. */
-
-static void
-validate_siginfo_access (void)
-{
- /* No current inferior, no siginfo. */
- if (ptid_equal (inferior_ptid, null_ptid))
- error (_("No thread selected."));
-
- /* Don't try to read from a dead thread. */
- if (is_exited (inferior_ptid))
- error (_("The current thread has terminated"));
-
- /* ... or from a spinning thread. */
- if (is_running (inferior_ptid))
- error (_("Selected thread is running."));
-}
-
/* The $_siginfo convenience variable is a bit special. We don't know
for sure the type of the value until we actually have a chance to
fetch the data. The type can change depending on gdbarch, so it is
{
LONGEST transferred;
- validate_siginfo_access ();
+ /* If we can access registers, so can we access $_siginfo. Likewise
+ vice versa. */
+ validate_registers_access ();
transferred =
target_read (¤t_target, TARGET_OBJECT_SIGNAL_INFO,
{
LONGEST transferred;
- validate_siginfo_access ();
+ /* If we can access registers, so can we access $_siginfo. Likewise
+ vice versa. */
+ validate_registers_access ();
transferred = target_write (¤t_target,
TARGET_OBJECT_SIGNAL_INFO,
/* Other fields: */
enum stop_stack_kind stop_stack_dummy;
int stopped_by_random_signal;
- int stop_after_trap;
/* ID if the selected frame when the inferior function call was made. */
struct frame_id selected_frame_id;
/* Other fields: */
inf_status->stop_stack_dummy = stop_stack_dummy;
inf_status->stopped_by_random_signal = stopped_by_random_signal;
- inf_status->stop_after_trap = stop_after_trap;
inf_status->selected_frame_id = get_frame_id (get_selected_frame (NULL));
/* Other fields: */
stop_stack_dummy = inf_status->stop_stack_dummy;
stopped_by_random_signal = inf_status->stopped_by_random_signal;
- stop_after_trap = inf_status->stop_after_trap;
if (target_has_stack)
{
signal_print[GDB_SIGNAL_WAITING] = 0;
signal_stop[GDB_SIGNAL_CANCEL] = 0;
signal_print[GDB_SIGNAL_CANCEL] = 0;
+ signal_stop[GDB_SIGNAL_LIBRT] = 0;
+ signal_print[GDB_SIGNAL_LIBRT] = 0;
/* Update cached state. */
signal_cache_update (-1);