static void sig_print_header (void);
-static void resume_cleanups (int);
+static void resume_cleanups (void *);
static int hook_stop_stub (void *);
#define HAVE_CONTINUABLE_WATCHPOINT 1
#endif
+#ifndef CANNOT_STEP_HW_WATCHPOINTS
+#define CANNOT_STEP_HW_WATCHPOINTS 0
+#else
+#undef CANNOT_STEP_HW_WATCHPOINTS
+#define CANNOT_STEP_HW_WATCHPOINTS 1
+#endif
+
/* Tables of how to react to signals; the user sets them. */
static unsigned char *signal_stop;
static char *follow_fork_mode_kind_names[] =
{
-/* ??rehrauer: The "both" option is broken, by what may be a 10.20
- kernel problem. It's also not terribly useful without a GUI to
- help the user drive two debuggers. So for now, I'm disabling
- the "both" option.
- "parent", "child", "both", "ask" };
- */
- "parent", "child", "ask"};
+ /* ??rehrauer: The "both" option is broken, by what may be a 10.20
+ kernel problem. It's also not terribly useful without a GUI to
+ help the user drive two debuggers. So for now, I'm disabling the
+ "both" option. */
+ /* "parent", "child", "both", "ask" */
+ "parent", "child", "ask", NULL
+};
static char *follow_fork_mode_string = NULL;
\f
/* Things to clean up if we QUIT out of resume (). */
/* ARGSUSED */
static void
-resume_cleanups (int arg)
+resume_cleanups (void *ignore)
{
normal_stop ();
}
static char schedlock_step[] = "step";
static char *scheduler_mode = schedlock_off;
static char *scheduler_enums[] =
-{schedlock_off, schedlock_on, schedlock_step};
+{
+ schedlock_off,
+ schedlock_on,
+ schedlock_step,
+ NULL
+};
static void
set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c)
resume (int step, enum target_signal sig)
{
int should_resume = 1;
- struct cleanup *old_cleanups = make_cleanup ((make_cleanup_func)
- resume_cleanups, 0);
+ struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
QUIT;
#ifdef CANNOT_STEP_BREAKPOINT
step = 0;
#endif
+ /* Some targets (e.g. Solaris x86) have a kernel bug when stepping
+ over an instruction that causes a page fault without triggering
+ a hardware watchpoint. The kernel properly notices that it shouldn't
+ stop, because the hardware watchpoint is not triggered, but it forgets
+ the step request and continues the program normally.
+ Work around the problem by removing hardware watchpoints if a step is
+ requested, GDB will check for a hardware watchpoint trigger after the
+ step anyway. */
+ if (CANNOT_STEP_HW_WATCHPOINTS && step && breakpoints_inserted)
+ remove_hw_watchpoints ();
+
+
/* Normally, by the time we reach `resume', the breakpoints are either
removed or inserted, as appropriate. The exception is if we're sitting
at a permanent breakpoint; we need to step over it, but permanent
int temp = insert_breakpoints ();
if (temp)
{
- print_sys_errmsg ("ptrace", temp);
+ print_sys_errmsg ("insert_breakpoints", temp);
error ("Cannot insert breakpoints.\n\
-The same program may be running in another process.");
+The same program may be running in another process,\n\
+or you may have requested too many hardware\n\
+breakpoints and/or watchpoints.\n");
}
breakpoints_inserted = 1;
stop_signal = ecs->ws.value.sig;
target_terminal_ours (); /* Must do this before mourn anyway */
- /* This looks pretty bogus to me. Doesn't TARGET_WAITKIND_SIGNALLED
- mean it is already dead? This has been here since GDB 2.8, so
- perhaps it means rms didn't understand unix waitstatuses?
- For the moment I'm just kludging around this in remote.c
- rather than trying to change it here --kingdon, 5 Dec 1994. */
- target_kill (); /* kill mourns as well */
+ /* Note: By definition of TARGET_WAITKIND_SIGNALLED, we shouldn't
+ reach here unless the inferior is dead. However, for years
+ target_kill() was called here, which hints that fatal signals aren't
+ really fatal on some systems. If that's true, then some changes
+ may be needed. */
+ target_mourn_inferior ();
print_stop_reason (SIGNAL_EXITED, stop_signal);
singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P */
the HP-UX maintainer to furnish a fix that doesn't break other
platforms. --JimB, 20 May 1999 */
check_sigtramp2 (ecs);
+ keep_going (ecs);
+ return;
}
/* Handle cases caused by hitting a breakpoint. */
if (step_over_calls > 0 || IGNORE_HELPER_CALL (stop_pc))
{
/* We're doing a "next". */
+
+ if (IN_SIGTRAMP (stop_pc, ecs->stop_func_name)
+ && INNER_THAN (step_frame_address, read_sp()))
+ /* We stepped out of a signal handler, and into its
+ calling trampoline. This is misdetected as a
+ subroutine call, but stepping over the signal
+ trampoline isn't such a bad idea. In order to do
+ that, we have to ignore the value in
+ step_frame_address, since that doesn't represent the
+ frame that'll reach when we return from the signal
+ trampoline. Otherwise we'll probably continue to the
+ end of the program. */
+ step_frame_address = 0;
+
step_over_function (ecs);
keep_going (ecs);
return;
step_resume_breakpoint =
set_momentary_breakpoint (sr_sal, get_current_frame (), bp_step_resume);
- if (!IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc))
+ if (step_frame_address && !IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc))
step_resume_breakpoint->frame = step_frame_address;
if (breakpoints_inserted)
case END_STEPPING_RANGE:
/* We are done with a step/next/si/ni command. */
/* For now print nothing. */
+#ifdef UI_OUT
+ /* Print a message only if not in the middle of doing a "step n"
+ operation for n > 1 */
+ if (!step_multi || !stop_step)
+ if (interpreter_p && strcmp (interpreter_p, "mi") == 0)
+ ui_out_field_string (uiout, "reason", "end-stepping-range");
+#endif
break;
case BREAKPOINT_HIT:
/* We found a breakpoint. */
/* The inferior was terminated by a signal. */
#ifdef UI_OUT
annotate_signalled ();
+ if (interpreter_p && strcmp (interpreter_p, "mi") == 0)
+ ui_out_field_string (uiout, "reason", "exited-signalled");
ui_out_text (uiout, "\nProgram terminated with signal ");
annotate_signal_name ();
ui_out_field_string (uiout, "signal-name", target_signal_to_name (stop_info));
annotate_exited (stop_info);
if (stop_info)
{
+ if (interpreter_p && strcmp (interpreter_p, "mi") == 0)
+ ui_out_field_string (uiout, "reason", "exited");
ui_out_text (uiout, "\nProgram exited with code ");
ui_out_field_fmt (uiout, "exit-code", "0%o", (unsigned int) stop_info);
ui_out_text (uiout, ".\n");
}
else
{
+ if (interpreter_p && strcmp (interpreter_p, "mi") == 0)
+ ui_out_field_string (uiout, "reason", "exited-normally");
ui_out_text (uiout, "\nProgram exited normally.\n");
}
#else
if (breakpoints_failed)
{
target_terminal_ours_for_output ();
- print_sys_errmsg ("ptrace", breakpoints_failed);
+ print_sys_errmsg ("While inserting breakpoints", breakpoints_failed);
printf_filtered ("Stopped; cannot insert breakpoints.\n\
-The same program may be running in another process.\n");
+The same program may be running in another process,\n\
+or you may have requested too many hardware breakpoints\n\
+and/or watchpoints.\n");
}
if (target_has_execution && breakpoints_inserted)
bpstat_print() contains the logic deciding in detail
what to print, based on the event(s) that just occurred. */
- if (stop_print_frame)
+ if (stop_print_frame
+ && selected_frame)
{
int bpstat_ret;
int source_flag;
default:
internal_error ("Unknown value.");
}
+#ifdef UI_OUT
+ /* For mi, have the same behavior every time we stop:
+ print everything but the source line. */
+ if (interpreter_p && strcmp (interpreter_p, "mi") == 0)
+ source_flag = LOC_AND_ADDRESS;
+#endif
+#ifdef UI_OUT
+ if (interpreter_p && strcmp (interpreter_p, "mi") == 0)
+ ui_out_field_int (uiout, "thread-id", pid_to_thread_id (inferior_pid));
+#endif
/* The behavior of this routine with respect to the source
flag is:
SRC_LINE: Print only source line
free_inferior_status (inf_status);
}
+static void
+do_restore_inferior_status_cleanup (void *sts)
+{
+ restore_inferior_status (sts);
+}
+
+struct cleanup *
+make_cleanup_restore_inferior_status (struct inferior_status *inf_status)
+{
+ return make_cleanup (do_restore_inferior_status_cleanup, inf_status);
+}
+
void
discard_inferior_status (struct inferior_status *inf_status)
{
c = add_set_enum_cmd ("follow-fork-mode",
class_run,
follow_fork_mode_kind_names,
- (char *) &follow_fork_mode_string,
+ &follow_fork_mode_string,
/* ??rehrauer: The "both" option is broken, by what may be a 10.20
kernel problem. It's also not terribly useful without a GUI to
help the user drive two debuggers. So for now, I'm disabling
c = add_set_enum_cmd ("scheduler-locking", class_run,
scheduler_enums, /* array of string names */
- (char *) &scheduler_mode, /* current mode */
+ &scheduler_mode, /* current mode */
"Set mode for locking scheduler during execution.\n\
off == no locking (threads may preempt at any time)\n\
on == full locking (no thread except the current thread may run)\n\
projects / deliverable / binutils-gdb.git / blobdiff