#include "frame.h"
#include "inferior.h"
#include "breakpoint.h"
-#include "common/gdb_wait.h"
#include "gdbcore.h"
#include "gdbcmd.h"
-#include "cli/cli-script.h"
#include "target.h"
#include "gdbthread.h"
#include "annotate.h"
#include "symfile.h"
#include "top.h"
-#include <signal.h>
#include "inf-loop.h"
#include "regcache.h"
#include "value.h"
#include "language.h"
#include "solib.h"
#include "main.h"
-#include "dictionary.h"
#include "block.h"
#include "mi/mi-common.h"
#include "event-top.h"
#include "inline-frame.h"
#include "jit.h"
#include "tracepoint.h"
-#include "continuations.h"
-#include "interps.h"
#include "skip.h"
#include "probe.h"
#include "objfiles.h"
#include "solist.h"
#include "event-loop.h"
#include "thread-fsm.h"
-#include "common/enum-flags.h"
+#include "gdbsupport/enum-flags.h"
#include "progspace-and-thread.h"
-#include "common/gdb_optional.h"
+#include "gdbsupport/gdb_optional.h"
#include "arch-utils.h"
-#include "common/scope-exit.h"
-#include "common/forward-scope-exit.h"
+#include "gdbsupport/scope-exit.h"
+#include "gdbsupport/forward-scope-exit.h"
/* Prototypes for local functions */
/* When set, stop the 'step' command if we enter a function which has
no line number information. The normal behavior is that we step
over such function. */
-int step_stop_if_no_debug = 0;
+bool step_stop_if_no_debug = false;
static void
show_step_stop_if_no_debug (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
Exactly which branch is detached depends on 'set follow-fork-mode'
setting. */
-static int detach_fork = 1;
+static bool detach_fork = true;
-int debug_displaced = 0;
+bool debug_displaced = false;
static void
show_debug_displaced (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
/* Support for disabling address space randomization. */
-int disable_randomization = 1;
+bool disable_randomization = true;
static void
show_disable_randomization (struct ui_file *file, int from_tty,
/* User interface for non-stop mode. */
-int non_stop = 0;
-static int non_stop_1 = 0;
+bool non_stop = false;
+static bool non_stop_1 = false;
static void
set_non_stop (const char *args, int from_tty,
non-stop, in which all GDB operations that might affect the
target's execution have been disabled. */
-int observer_mode = 0;
-static int observer_mode_1 = 0;
+bool observer_mode = false;
+static bool observer_mode_1 = false;
static void
set_observer_mode (const char *args, int from_tty,
/* We can insert fast tracepoints in or out of observer mode,
but enable them if we're going into this mode. */
if (observer_mode)
- may_insert_fast_tracepoints = 1;
+ may_insert_fast_tracepoints = true;
may_stop = !observer_mode;
update_target_permissions ();
if (observer_mode)
{
pagination_enabled = 0;
- non_stop = non_stop_1 = 1;
+ non_stop = non_stop_1 = true;
}
if (from_tty)
void
update_observer_mode (void)
{
- int newval;
-
- newval = (!may_insert_breakpoints
- && !may_insert_tracepoints
- && may_insert_fast_tracepoints
- && !may_stop
- && non_stop);
+ bool newval = (!may_insert_breakpoints
+ && !may_insert_tracepoints
+ && may_insert_fast_tracepoints
+ && !may_stop
+ && non_stop);
/* Let the user know if things change. */
if (newval != observer_mode)
/* EXEC_FILE_TARGET is assumed to be non-NULL. */
static void
-follow_exec (ptid_t ptid, char *exec_file_target)
+follow_exec (ptid_t ptid, const char *exec_file_target)
{
struct inferior *inf = current_inferior ();
int pid = ptid.pid ();
And, we DON'T want to call delete_breakpoints() here, since
that may write the bp's "shadow contents" (the instruction
- value that was overwritten witha TRAP instruction). Since
+ value that was overwritten with a TRAP instruction). Since
we now have a new a.out, those shadow contents aren't valid. */
mark_breakpoints_out ();
register contents, and memory. We use this in step n1.
- gdbarch_displaced_step_fixup adjusts registers and memory after
- we have successfuly single-stepped the instruction, to yield the
+ we have successfully single-stepped the instruction, to yield the
same effect the instruction would have had if we had executed it
at its original address. We use this in step n3.
/* True if execution commands resume all threads of all processes by
default; otherwise, resume only threads of the current inferior
process. */
-int sched_multi = 0;
+bool sched_multi = false;
/* Try to setup for software single stepping over the specified location.
Return 1 if target_resume() should use hardware single step.
{
if (!ecs->stop_func_filled_in)
{
+ const block *block;
+
/* Don't care about return value; stop_func_start and stop_func_name
will both be 0 if it doesn't work. */
- find_function_entry_range_from_pc (ecs->event_thread->suspend.stop_pc,
- &ecs->stop_func_name,
- &ecs->stop_func_start,
- &ecs->stop_func_end);
- ecs->stop_func_start
- += gdbarch_deprecated_function_start_offset (gdbarch);
-
- if (gdbarch_skip_entrypoint_p (gdbarch))
- ecs->stop_func_start = gdbarch_skip_entrypoint (gdbarch,
- ecs->stop_func_start);
+ find_pc_partial_function (ecs->event_thread->suspend.stop_pc,
+ &ecs->stop_func_name,
+ &ecs->stop_func_start,
+ &ecs->stop_func_end,
+ &block);
+
+ /* The call to find_pc_partial_function, above, will set
+ stop_func_start and stop_func_end to the start and end
+ of the range containing the stop pc. If this range
+ contains the entry pc for the block (which is always the
+ case for contiguous blocks), advance stop_func_start past
+ the function's start offset and entrypoint. Note that
+ stop_func_start is NOT advanced when in a range of a
+ non-contiguous block that does not contain the entry pc. */
+ if (block != nullptr
+ && ecs->stop_func_start <= BLOCK_ENTRY_PC (block)
+ && BLOCK_ENTRY_PC (block) < ecs->stop_func_end)
+ {
+ ecs->stop_func_start
+ += gdbarch_deprecated_function_start_offset (gdbarch);
+
+ if (gdbarch_skip_entrypoint_p (gdbarch))
+ ecs->stop_func_start
+ = gdbarch_skip_entrypoint (gdbarch, ecs->stop_func_start);
+ }
ecs->stop_func_filled_in = 1;
}
return;
}
- /* Note: step_resume_breakpoint may be non-NULL. This occures
+ /* Note: step_resume_breakpoint may be non-NULL. This occurs
when either there's a nested signal, or when there's a
pending signal enabled just as the signal handler returns
(leaving the inferior at the step-resume-breakpoint without
{
if (uiout->is_mi_like_p ())
uiout->field_string ("reason", async_reason_lookup (EXEC_ASYNC_EXITED));
- uiout->text ("[Inferior ");
- uiout->text (plongest (inf->num));
- uiout->text (" (");
- uiout->text (pidstr.c_str ());
- uiout->text (") exited with code ");
- uiout->field_fmt ("exit-code", "0%o", (unsigned int) exitstatus);
- uiout->text ("]\n");
+ std::string exit_code_str
+ = string_printf ("0%o", (unsigned int) exitstatus);
+ uiout->message ("[Inferior %s (%s) exited with code %pF]\n",
+ plongest (inf->num), pidstr.c_str (),
+ string_field ("exit-code", exit_code_str.c_str ()));
}
else
{
if (uiout->is_mi_like_p ())
uiout->field_string
("reason", async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
- uiout->text ("[Inferior ");
- uiout->text (plongest (inf->num));
- uiout->text (" (");
- uiout->text (pidstr.c_str ());
- uiout->text (") exited normally]\n");
+ uiout->message ("[Inferior %s (%s) exited normally]\n",
+ plongest (inf->num), pidstr.c_str ());
}
}
const char *name;
uiout->text ("\nThread ");
- uiout->field_fmt ("thread-id", "%s", print_thread_id (thr));
+ uiout->field_string ("thread-id", print_thread_id (thr));
name = thr->name != NULL ? thr->name : target_thread_name (thr);
if (name != NULL)
{
uiout->text (" \"");
- uiout->field_fmt ("name", "%s", name);
+ uiout->field_string ("name", name);
uiout->text ("\"");
}
}