static int currently_stepping (struct thread_info *tp);
-static int currently_stepping_callback (struct thread_info *tp, void *data);
+static int currently_stepping_or_nexting_callback (struct thread_info *tp,
+ void *data);
static void xdb_handle_command (char *args, int from_tty);
}
static void
-cleanup_displaced_step_closure (void *ptr)
+displaced_step_clear_cleanup (void *ignore)
{
- struct displaced_step_closure *closure = ptr;
-
- gdbarch_displaced_step_free_closure (current_gdbarch, closure);
+ displaced_step_clear ();
}
/* Dump LEN bytes at BUF in hex to FILE, followed by a newline. */
/* We don't support the fully-simulated case at present. */
gdb_assert (closure);
- make_cleanup (cleanup_displaced_step_closure, closure);
+ /* Save the information we need to fix things up if the step
+ succeeds. */
+ displaced_step_ptid = ptid;
+ displaced_step_gdbarch = gdbarch;
+ displaced_step_closure = closure;
+ displaced_step_original = original;
+ displaced_step_copy = copy;
+
+ make_cleanup (displaced_step_clear_cleanup, 0);
/* Resume execution at the copy. */
regcache_write_pc (regcache, copy);
fprintf_unfiltered (gdb_stdlog, "displaced: displaced pc to 0x%s\n",
paddr_nz (copy));
- /* Save the information we need to fix things up if the step
- succeeds. */
- displaced_step_ptid = ptid;
- displaced_step_gdbarch = gdbarch;
- displaced_step_closure = closure;
- displaced_step_original = original;
- displaced_step_copy = copy;
return 1;
}
-static void
-displaced_step_clear_cleanup (void *ignore)
-{
- displaced_step_clear ();
-}
-
static void
write_memory_ptid (ptid_t ptid, CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
{
}
}
+/* True if execution commands resume all threads of all processes by
+ default; otherwise, resume only threads of the current inferior
+ process. */
+int sched_multi = 0;
+
/* Try to setup for software single stepping over the specified location.
Return 1 if target_resume() should use hardware single step.
{
ptid_t resume_ptid;
- resume_ptid = RESUME_ALL; /* Default */
-
/* If STEP is set, it's a request to use hardware stepping
facilities. But in that case, we should never
use singlestep breakpoint. */
gdb_assert (!(singlestep_breakpoints_inserted_p && step));
+ /* Decide the set of threads to ask the target to resume. Start
+ by assuming everything will be resumed, than narrow the set
+ by applying increasingly restricting conditions. */
+
+ /* By default, resume all threads of all processes. */
+ resume_ptid = RESUME_ALL;
+
+ /* Maybe resume only all threads of the current process. */
+ if (!sched_multi && target_supports_multi_process ())
+ {
+ resume_ptid = pid_to_ptid (ptid_get_pid (inferior_ptid));
+ }
+
+ /* Maybe resume a single thread after all. */
if (singlestep_breakpoints_inserted_p
&& stepping_past_singlestep_breakpoint)
{
to support, and has no value. */
resume_ptid = inferior_ptid;
}
-
- if ((step || singlestep_breakpoints_inserted_p)
- && tp->trap_expected)
+ else if ((step || singlestep_breakpoints_inserted_p)
+ && tp->trap_expected)
{
/* We're allowing a thread to run past a breakpoint it has
hit, by single-stepping the thread with the breakpoint
breakpoint, not just the one at PC. */
resume_ptid = inferior_ptid;
}
-
- if (non_stop)
+ else if (non_stop)
{
/* With non-stop mode on, threads are always handled
individually. */
}
}
-/* This should be suitable for any targets that support threads. */
+/* Check the current thread against the thread that reported the most recent
+ event. If a step-over is required return TRUE and set the current thread
+ to the old thread. Otherwise return FALSE.
+
+ This should be suitable for any targets that support threads. */
static int
prepare_to_proceed (int step)
{
ptid_t wait_ptid;
struct target_waitstatus wait_status;
+ int schedlock_enabled;
+
+ /* With non-stop mode on, threads are always handled individually. */
+ gdb_assert (! non_stop);
/* Get the last target status returned by target_wait(). */
get_last_target_status (&wait_ptid, &wait_status);
return 0;
}
+ schedlock_enabled = (scheduler_mode == schedlock_on
+ || (scheduler_mode == schedlock_step
+ && step));
+
+ /* Don't switch over to WAIT_PTID if scheduler locking is on. */
+ if (schedlock_enabled)
+ return 0;
+
+ /* Don't switch over if we're about to resume some other process
+ other than WAIT_PTID's, and schedule-multiple is off. */
+ if (!sched_multi
+ && ptid_get_pid (wait_ptid) != ptid_get_pid (inferior_ptid))
+ return 0;
+
/* Switched over from WAIT_PID. */
if (!ptid_equal (wait_ptid, minus_one_ptid)
&& !ptid_equal (inferior_ptid, wait_ptid))
void handle_inferior_event (struct execution_control_state *ecs);
-static void handle_step_into_function (struct execution_control_state *ecs);
-static void handle_step_into_function_backward (struct execution_control_state *ecs);
+static void handle_step_into_function (struct gdbarch *gdbarch,
+ struct execution_control_state *ecs);
+static void handle_step_into_function_backward (struct gdbarch *gdbarch,
+ struct execution_control_state *ecs);
static void insert_step_resume_breakpoint_at_frame (struct frame_info *step_frame);
static void insert_step_resume_breakpoint_at_caller (struct frame_info *);
static void insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
void
handle_inferior_event (struct execution_control_state *ecs)
{
+ struct frame_info *frame;
+ struct gdbarch *gdbarch;
int sw_single_step_trap_p = 0;
int stopped_by_watchpoint;
int stepped_after_stopped_by_watchpoint = 0;
operations such as address => section name and hence
require the table to contain all sections (including
those found in shared libraries). */
- /* NOTE: cagney/2003-11-25: Pass current_target and not
- exec_ops to SOLIB_ADD. This is because current GDB is
- only tooled to propagate section_table changes out from
- the "current_target" (see target_resize_to_sections), and
- not up from the exec stratum. This, of course, isn't
- right. "infrun.c" should only interact with the
- exec/process stratum, instead relying on the target stack
- to propagate relevant changes (stop, section table
- changed, ...) up to other layers. */
#ifdef SOLIB_ADD
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
#else
/* Record the exit code in the convenience variable $_exitcode, so
that the user can inspect this again later. */
- set_internalvar (lookup_internalvar ("_exitcode"),
- value_from_longest (builtin_type_int32,
- (LONGEST) ecs->ws.value.integer));
+ set_internalvar_integer (lookup_internalvar ("_exitcode"),
+ (LONGEST) ecs->ws.value.integer);
gdb_flush (gdb_stdout);
target_mourn_inferior ();
singlestep_breakpoints_inserted_p = 0;
if (thread_hop_needed)
{
+ struct regcache *thread_regcache;
int remove_status = 0;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
+ /* Switch context before touching inferior memory, the
+ previous thread may have exited. */
+ if (!ptid_equal (inferior_ptid, ecs->ptid))
+ context_switch (ecs->ptid);
+
/* Saw a breakpoint, but it was hit by the wrong thread.
Just continue. */
/* If the arch can displace step, don't remove the
breakpoints. */
- if (!use_displaced_stepping (current_gdbarch))
+ thread_regcache = get_thread_regcache (ecs->ptid);
+ if (!use_displaced_stepping (get_regcache_arch (thread_regcache)))
remove_status = remove_breakpoints ();
/* Did we fail to remove breakpoints? If so, try
error (_("Cannot step over breakpoint hit in wrong thread"));
else
{ /* Single step */
- if (!ptid_equal (inferior_ptid, ecs->ptid))
- context_switch (ecs->ptid);
-
if (!non_stop)
{
/* Only need to require the next event from this
deprecated_context_hook (pid_to_thread_id (ecs->ptid));
}
+ /* At this point, get hold of the now-current thread's frame. */
+ frame = get_current_frame ();
+ gdbarch = get_frame_arch (frame);
+
if (singlestep_breakpoints_inserted_p)
{
/* Pull the single step breakpoints out of the target. */
it in a moment. */
if (stopped_by_watchpoint
&& (target_have_steppable_watchpoint
- || gdbarch_have_nonsteppable_watchpoint (current_gdbarch)))
+ || gdbarch_have_nonsteppable_watchpoint (gdbarch)))
{
/* At this point, we are stopped at an instruction which has
attempted to write to a piece of memory under control of
if (!target_have_steppable_watchpoint)
remove_breakpoints ();
/* Single step */
- hw_step = maybe_software_singlestep (current_gdbarch, stop_pc);
+ hw_step = maybe_software_singlestep (gdbarch, stop_pc);
target_resume (ecs->ptid, hw_step, TARGET_SIGNAL_0);
registers_changed ();
waiton_ptid = ecs->ptid;
find_pc_partial_function (stop_pc, &ecs->stop_func_name,
&ecs->stop_func_start, &ecs->stop_func_end);
ecs->stop_func_start
- += gdbarch_deprecated_function_start_offset (current_gdbarch);
+ += gdbarch_deprecated_function_start_offset (gdbarch);
ecs->event_thread->stepping_over_breakpoint = 0;
bpstat_clear (&ecs->event_thread->stop_bpstat);
ecs->event_thread->stop_step = 0;
if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
&& ecs->event_thread->trap_expected
- && gdbarch_single_step_through_delay_p (current_gdbarch)
+ && gdbarch_single_step_through_delay_p (gdbarch)
&& currently_stepping (ecs->event_thread))
{
/* We're trying to step off a breakpoint. Turns out that we're
with a delay slot. It needs to be stepped twice, once for
the instruction and once for the delay slot. */
int step_through_delay
- = gdbarch_single_step_through_delay (current_gdbarch,
- get_current_frame ());
+ = gdbarch_single_step_through_delay (gdbarch, frame);
if (debug_infrun && step_through_delay)
fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n");
if (ecs->event_thread->step_range_end == 0 && step_through_delay)
ecs->random_signal = 1;
process_event_stop_test:
+
+ /* Re-fetch current thread's frame in case we did a
+ "goto process_event_stop_test" above. */
+ frame = get_current_frame ();
+ gdbarch = get_frame_arch (frame);
+
/* For the program's own signals, act according to
the signal handling tables. */
"infrun: signal arrived while stepping over "
"breakpoint\n");
- insert_step_resume_breakpoint_at_frame (get_current_frame ());
+ insert_step_resume_breakpoint_at_frame (frame);
ecs->event_thread->step_after_step_resume_breakpoint = 1;
keep_going (ecs);
return;
&& ecs->event_thread->stop_signal != TARGET_SIGNAL_0
&& (ecs->event_thread->step_range_start <= stop_pc
&& stop_pc < ecs->event_thread->step_range_end)
- && frame_id_eq (get_frame_id (get_current_frame ()),
+ && frame_id_eq (get_frame_id (frame),
ecs->event_thread->step_frame_id)
&& ecs->event_thread->step_resume_breakpoint == NULL)
{
"infrun: signal may take us out of "
"single-step range\n");
- insert_step_resume_breakpoint_at_frame (get_current_frame ());
+ insert_step_resume_breakpoint_at_frame (frame);
keep_going (ecs);
return;
}
ecs->event_thread->stepping_over_breakpoint = 1;
- if (!gdbarch_get_longjmp_target_p (current_gdbarch)
- || !gdbarch_get_longjmp_target (current_gdbarch,
- get_current_frame (), &jmp_buf_pc))
+ if (!gdbarch_get_longjmp_target_p (gdbarch)
+ || !gdbarch_get_longjmp_target (gdbarch, frame, &jmp_buf_pc))
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "\
operations such as address => section name and hence
require the table to contain all sections (including
those found in shared libraries). */
- /* NOTE: cagney/2003-11-25: Pass current_target and not
- exec_ops to SOLIB_ADD. This is because current GDB is
- only tooled to propagate section_table changes out from
- the "current_target" (see target_resize_to_sections), and
- not up from the exec stratum. This, of course, isn't
- right. "infrun.c" should only interact with the
- exec/process stratum, instead relying on the target stack
- to propagate relevant changes (stop, section table
- changed, ...) up to other layers. */
#ifdef SOLIB_ADD
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
#else
if (!non_stop)
{
struct thread_info *tp;
- tp = iterate_over_threads (currently_stepping_callback,
+ tp = iterate_over_threads (currently_stepping_or_nexting_callback,
ecs->event_thread);
if (tp)
{
return;
}
+ /* If the stepping thread exited, then don't try to switch
+ back and resume it, which could fail in several different
+ ways depending on the target. Instead, just keep going.
+
+ We can find a stepping dead thread in the thread list in
+ two cases:
+
+ - The target supports thread exit events, and when the
+ target tries to delete the thread from the thread list,
+ inferior_ptid pointed at the exiting thread. In such
+ case, calling delete_thread does not really remove the
+ thread from the list; instead, the thread is left listed,
+ with 'exited' state.
+
+ - The target's debug interface does not support thread
+ exit events, and so we have no idea whatsoever if the
+ previously stepping thread is still alive. For that
+ reason, we need to synchronously query the target
+ now. */
+ if (is_exited (tp->ptid)
+ || !target_thread_alive (tp->ptid))
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "\
+infrun: not switching back to stepped thread, it has vanished\n");
+
+ delete_thread (tp->ptid);
+ keep_going (ecs);
+ return;
+ }
+
/* Otherwise, we no longer expect a trap in the current thread.
Clear the trap_expected flag before switching back -- this is
what keep_going would do as well, if we called it. */
Note that step_range_end is the address of the first instruction
beyond the step range, and NOT the address of the last instruction
- within it! */
+ within it!
+
+ Note also that during reverse execution, we may be stepping
+ through a function epilogue and therefore must detect when
+ the current-frame changes in the middle of a line. */
+
if (stop_pc >= ecs->event_thread->step_range_start
- && stop_pc < ecs->event_thread->step_range_end)
+ && stop_pc < ecs->event_thread->step_range_end
+ && (execution_direction != EXEC_REVERSE
+ || frame_id_eq (get_frame_id (get_current_frame ()),
+ ecs->event_thread->step_frame_id)))
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepping inside range [0x%s-0x%s]\n",
&& in_solib_dynsym_resolve_code (stop_pc))
{
CORE_ADDR pc_after_resolver =
- gdbarch_skip_solib_resolver (current_gdbarch, stop_pc);
+ gdbarch_skip_solib_resolver (gdbarch, stop_pc);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into dynsym resolve code\n");
if (ecs->event_thread->step_range_end != 1
&& (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
|| ecs->event_thread->step_over_calls == STEP_OVER_ALL)
- && get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME)
+ && get_frame_type (frame) == SIGTRAMP_FRAME)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into signal trampoline\n");
NOTE: frame_id_eq will never report two invalid frame IDs as
being equal, so to get into this block, both the current and
previous frame must have valid frame IDs. */
- if (!frame_id_eq (get_frame_id (get_current_frame ()),
+ if (!frame_id_eq (get_frame_id (frame),
ecs->event_thread->step_frame_id)
- && (frame_id_eq (frame_unwind_id (get_current_frame ()),
+ && (frame_id_eq (frame_unwind_id (frame),
ecs->event_thread->step_frame_id)
|| execution_direction == EXEC_REVERSE))
{
if ((ecs->event_thread->step_over_calls == STEP_OVER_NONE)
|| ((ecs->event_thread->step_range_end == 1)
- && in_prologue (ecs->event_thread->prev_pc,
+ && in_prologue (gdbarch, ecs->event_thread->prev_pc,
ecs->stop_func_start)))
{
/* I presume that step_over_calls is only 0 when we're
keep_going (ecs);
return;
}
- /* Normal (staticly linked) function call return. */
- init_sal (&sr_sal);
- sr_sal.pc = ecs->stop_func_start;
- insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
+ if (gdbarch_skip_trampoline_code(current_gdbarch,
+ get_current_frame (),
+ stop_pc))
+ {
+ /* We are in a function call trampoline.
+ Keep stepping backward to get to the caller. */
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ }
+ else
+ {
+ /* Normal function call return (static or dynamic). */
+ init_sal (&sr_sal);
+ sr_sal.pc = ecs->stop_func_start;
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
+ }
}
else
- insert_step_resume_breakpoint_at_caller (get_current_frame ());
+ insert_step_resume_breakpoint_at_caller (frame);
keep_going (ecs);
return;
function. That's what tells us (a) whether we want to step
into it at all, and (b) what prologue we want to run to the
end of, if we do step into it. */
- real_stop_pc = skip_language_trampoline (get_current_frame (), stop_pc);
+ real_stop_pc = skip_language_trampoline (frame, stop_pc);
if (real_stop_pc == 0)
- real_stop_pc = gdbarch_skip_trampoline_code
- (current_gdbarch, get_current_frame (), stop_pc);
+ real_stop_pc = gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc);
if (real_stop_pc != 0)
ecs->stop_func_start = real_stop_pc;
if (tmp_sal.line != 0)
{
if (execution_direction == EXEC_REVERSE)
- handle_step_into_function_backward (ecs);
+ handle_step_into_function_backward (gdbarch, ecs);
else
- handle_step_into_function (ecs);
+ handle_step_into_function (gdbarch, ecs);
return;
}
}
else
/* Set a breakpoint at callee's return address (the address
at which the caller will resume). */
- insert_step_resume_breakpoint_at_caller (get_current_frame ());
+ insert_step_resume_breakpoint_at_caller (frame);
keep_going (ecs);
return;
/* If we're in the return path from a shared library trampoline,
we want to proceed through the trampoline when stepping. */
- if (gdbarch_in_solib_return_trampoline (current_gdbarch,
+ if (gdbarch_in_solib_return_trampoline (gdbarch,
stop_pc, ecs->stop_func_name))
{
/* Determine where this trampoline returns. */
CORE_ADDR real_stop_pc;
- real_stop_pc = gdbarch_skip_trampoline_code
- (current_gdbarch, get_current_frame (), stop_pc);
+ real_stop_pc = gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n");
set step-mode) or we no longer know how to get back
to the call site. */
if (step_stop_if_no_debug
- || !frame_id_p (frame_unwind_id (get_current_frame ())))
+ || !frame_id_p (frame_unwind_id (frame)))
{
/* If we have no line number and the step-stop-if-no-debug
is set, we stop the step so that the user has a chance to
{
/* Set a breakpoint at callee's return address (the address
at which the caller will resume). */
- insert_step_resume_breakpoint_at_caller (get_current_frame ());
+ insert_step_resume_breakpoint_at_caller (frame);
keep_going (ecs);
return;
}
ecs->event_thread->step_range_start = stop_pc_sal.pc;
ecs->event_thread->step_range_end = stop_pc_sal.end;
- ecs->event_thread->step_frame_id = get_frame_id (get_current_frame ());
+ ecs->event_thread->step_frame_id = get_frame_id (frame);
ecs->event_thread->current_line = stop_pc_sal.line;
ecs->event_thread->current_symtab = stop_pc_sal.symtab;
keep_going (ecs);
}
-/* Are we in the middle of stepping? */
+/* Is thread TP in the middle of single-stepping? */
static int
-currently_stepping_thread (struct thread_info *tp)
+currently_stepping (struct thread_info *tp)
{
- return (tp->step_range_end && tp->step_resume_breakpoint == NULL)
- || tp->trap_expected
- || tp->stepping_through_solib_after_catch;
+ return ((tp->step_range_end && tp->step_resume_breakpoint == NULL)
+ || tp->trap_expected
+ || tp->stepping_through_solib_after_catch
+ || bpstat_should_step ());
}
-static int
-currently_stepping_callback (struct thread_info *tp, void *data)
-{
- /* Return true if any thread *but* the one passed in "data" is
- in the middle of stepping. */
- return tp != data && currently_stepping_thread (tp);
-}
+/* Returns true if any thread *but* the one passed in "data" is in the
+ middle of stepping or of handling a "next". */
static int
-currently_stepping (struct thread_info *tp)
+currently_stepping_or_nexting_callback (struct thread_info *tp, void *data)
{
- return currently_stepping_thread (tp) || bpstat_should_step ();
+ if (tp == data)
+ return 0;
+
+ return (tp->step_range_end
+ || tp->trap_expected
+ || tp->stepping_through_solib_after_catch);
}
/* Inferior has stepped into a subroutine call with source code that
it. */
static void
-handle_step_into_function (struct execution_control_state *ecs)
+handle_step_into_function (struct gdbarch *gdbarch,
+ struct execution_control_state *ecs)
{
struct symtab *s;
struct symtab_and_line stop_func_sal, sr_sal;
s = find_pc_symtab (stop_pc);
if (s && s->language != language_asm)
- ecs->stop_func_start = gdbarch_skip_prologue (current_gdbarch,
+ ecs->stop_func_start = gdbarch_skip_prologue (gdbarch,
ecs->stop_func_start);
stop_func_sal = find_pc_line (ecs->stop_func_start, 0);
the VLIW instruction. Thus, we need to make the corresponding
adjustment here when computing the stop address. */
- if (gdbarch_adjust_breakpoint_address_p (current_gdbarch))
+ if (gdbarch_adjust_breakpoint_address_p (gdbarch))
{
ecs->stop_func_start
- = gdbarch_adjust_breakpoint_address (current_gdbarch,
+ = gdbarch_adjust_breakpoint_address (gdbarch,
ecs->stop_func_start);
}
last line of code in it. */
static void
-handle_step_into_function_backward (struct execution_control_state *ecs)
+handle_step_into_function_backward (struct gdbarch *gdbarch,
+ struct execution_control_state *ecs)
{
struct symtab *s;
struct symtab_and_line stop_func_sal, sr_sal;
s = find_pc_symtab (stop_pc);
if (s && s->language != language_asm)
- ecs->stop_func_start = gdbarch_skip_prologue (current_gdbarch,
+ ecs->stop_func_start = gdbarch_skip_prologue (gdbarch,
ecs->stop_func_start);
stop_func_sal = find_pc_line (stop_pc, 0);
static void
insert_step_resume_breakpoint_at_frame (struct frame_info *return_frame)
{
+ struct gdbarch *gdbarch = get_frame_arch (return_frame);
struct symtab_and_line sr_sal;
gdb_assert (return_frame != NULL);
init_sal (&sr_sal); /* initialize to zeros */
- sr_sal.pc = gdbarch_addr_bits_remove
- (current_gdbarch, get_frame_pc (return_frame));
+ sr_sal.pc = gdbarch_addr_bits_remove (gdbarch, get_frame_pc (return_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
insert_step_resume_breakpoint_at_sal (sr_sal, get_frame_id (return_frame));
static void
insert_step_resume_breakpoint_at_caller (struct frame_info *next_frame)
{
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
struct symtab_and_line sr_sal;
/* We shouldn't have gotten here if we don't know where the call site
init_sal (&sr_sal); /* initialize to zeros */
- sr_sal.pc = gdbarch_addr_bits_remove
- (current_gdbarch, frame_pc_unwind (next_frame));
+ sr_sal.pc = gdbarch_addr_bits_remove (gdbarch, frame_pc_unwind (next_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
insert_step_resume_breakpoint_at_sal (sr_sal, frame_unwind_id (next_frame));
if (ecs->event_thread->stepping_over_breakpoint)
{
- if (! use_displaced_stepping (current_gdbarch))
+ struct regcache *thread_regcache = get_thread_regcache (ecs->ptid);
+ if (!use_displaced_stepping (get_regcache_arch (thread_regcache)))
/* Since we can't do a displaced step, we have to remove
the breakpoint while we step it. To keep things
simple, we remove them all. */
propagate GDB's knowledge of the executing state to the
frontend/user running state. A QUIT is an easy exception to see
here, so do this before any filtered output. */
- if (target_has_execution)
- {
- if (!non_stop)
- make_cleanup (finish_thread_state_cleanup, &minus_one_ptid);
- else if (last.kind != TARGET_WAITKIND_SIGNALLED
- && last.kind != TARGET_WAITKIND_EXITED)
- make_cleanup (finish_thread_state_cleanup, &inferior_ptid);
- }
+ if (!non_stop)
+ make_cleanup (finish_thread_state_cleanup, &minus_one_ptid);
+ else if (last.kind != TARGET_WAITKIND_SIGNALLED
+ && last.kind != TARGET_WAITKIND_EXITED)
+ make_cleanup (finish_thread_state_cleanup, &inferior_ptid);
/* In non-stop mode, we don't want GDB to switch threads behind the
user's back, to avoid races where the user is typing a command to
value);
}
+static void
+show_schedule_multiple (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Resuming the execution of threads of all processes is %s.\n"), value);
+}
void
_initialize_infrun (void)
show_scheduler_mode,
&setlist, &showlist);
+ add_setshow_boolean_cmd ("schedule-multiple", class_run, &sched_multi, _("\
+Set mode for resuming threads of all processes."), _("\
+Show mode for resuming threads of all processes."), _("\
+When on, execution commands (such as 'continue' or 'next') resume all\n\
+threads of all processes. When off (which is the default), execution\n\
+commands only resume the threads of the current process. The set of\n\
+threads that are resumed is further refined by the scheduler-locking\n\
+mode (see help set scheduler-locking)."),
+ NULL,
+ show_schedule_multiple,
+ &setlist, &showlist);
+
add_setshow_boolean_cmd ("step-mode", class_run, &step_stop_if_no_debug, _("\
Set mode of the step operation."), _("\
Show mode of the step operation."), _("\