static int hook_stop_stub (void *);
-static void delete_breakpoint_current_contents (void *);
-
static int restore_selected_frame (void *);
static void build_infrun (void);
static int stop_on_solib_events;
#endif
-#ifdef HP_OS_BUG
-/* Nonzero if the next time we try to continue the inferior, it will
- step one instruction and generate a spurious trace trap.
- This is used to compensate for a bug in HP-UX. */
-
-static int trap_expected_after_continue;
-#endif
-
/* Nonzero means expecting a trace trap
and should stop the inferior and return silently when it happens. */
static int stop_print_frame;
static struct breakpoint *step_resume_breakpoint = NULL;
-static struct breakpoint *through_sigtramp_breakpoint = NULL;
/* On some platforms (e.g., HP-UX), hardware watchpoints have bad
interactions with an inferior that is running a kernel function
step_range_start = 0;
step_range_end = 0;
- /* If there was one, it's gone now. */
- through_sigtramp_breakpoint = NULL;
-
/* What is this a.out's name? */
printf_unfiltered ("Executing new program: %s\n", execd_pathname);
singlestep_ptid = inferior_ptid;
}
- /* Handle any optimized stores to the inferior NOW... */
-#ifdef DO_DEFERRED_STORES
- DO_DEFERRED_STORES;
-#endif
-
/* If there were any forks/vforks/execs that were caught and are
now to be followed, then do so. */
switch (pending_follow.kind)
if (prepare_to_proceed () && breakpoint_here_p (read_pc ()))
oneproc = 1;
-#ifdef HP_OS_BUG
- if (trap_expected_after_continue)
- {
- /* If (step == 0), a trap will be automatically generated after
- the first instruction is executed. Force step one
- instruction to clear this condition. This should not occur
- if step is nonzero, but it is harmless in that case. */
- oneproc = 1;
- trap_expected_after_continue = 0;
- }
-#endif /* HP_OS_BUG */
-
if (oneproc)
/* We will get a trace trap after one instruction.
Continue it automatically and insert breakpoints then. */
/* These are meaningless until the first time through wait_for_inferior. */
prev_pc = 0;
-#ifdef HP_OS_BUG
- trap_expected_after_continue = 0;
-#endif
breakpoints_inserted = 0;
breakpoint_init_inferior (inf_starting);
stepping_past_singlestep_breakpoint = 0;
}
-
-static void
-delete_breakpoint_current_contents (void *arg)
-{
- struct breakpoint **breakpointp = (struct breakpoint **) arg;
- if (*breakpointp != NULL)
- {
- delete_breakpoint (*breakpointp);
- *breakpointp = NULL;
- }
-}
\f
/* This enum encodes possible reasons for doing a target_wait, so that
wfi can call target_wait in one place. (Ultimately the call will be
int handling_longjmp; /* FIXME */
ptid_t ptid;
ptid_t saved_inferior_ptid;
- int update_step_sp;
int stepping_through_solib_after_catch;
bpstat stepping_through_solib_catchpoints;
int enable_hw_watchpoints_after_wait;
void init_execution_control_state (struct execution_control_state *ecs);
-static void handle_step_into_function (struct execution_control_state *ecs);
void handle_inferior_event (struct execution_control_state *ecs);
-static void check_sigtramp2 (struct execution_control_state *ecs);
static void step_into_function (struct execution_control_state *ecs);
-static void step_over_function (struct execution_control_state *ecs);
+static void insert_step_resume_breakpoint (struct frame_info *step_frame,
+ struct execution_control_state *ecs);
static void stop_stepping (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
static void keep_going (struct execution_control_state *ecs);
old_cleanups = make_cleanup (delete_step_resume_breakpoint,
&step_resume_breakpoint);
- make_cleanup (delete_breakpoint_current_contents,
- &through_sigtramp_breakpoint);
/* wfi still stays in a loop, so it's OK just to take the address of
a local to get the ecs pointer. */
{
old_cleanups = make_exec_cleanup (delete_step_resume_breakpoint,
&step_resume_breakpoint);
- make_exec_cleanup (delete_breakpoint_current_contents,
- &through_sigtramp_breakpoint);
/* Fill in with reasonable starting values. */
init_execution_control_state (async_ecs);
ecs->random_signal = 0;
ecs->remove_breakpoints_on_following_step = 0;
ecs->handling_longjmp = 0; /* FIXME */
- ecs->update_step_sp = 0;
ecs->stepping_through_solib_after_catch = 0;
ecs->stepping_through_solib_catchpoints = NULL;
ecs->enable_hw_watchpoints_after_wait = 0;
/* Save infrun state for the old thread. */
save_infrun_state (inferior_ptid, prev_pc,
trap_expected, step_resume_breakpoint,
- through_sigtramp_breakpoint, step_range_start,
+ step_range_start,
step_range_end, &step_frame_id,
ecs->handling_longjmp, ecs->another_trap,
ecs->stepping_through_solib_after_catch,
ecs->stepping_through_solib_catchpoints,
ecs->stepping_through_sigtramp,
- ecs->current_line, ecs->current_symtab, step_sp);
+ ecs->current_line, ecs->current_symtab);
/* Load infrun state for the new thread. */
load_infrun_state (ecs->ptid, &prev_pc,
&trap_expected, &step_resume_breakpoint,
- &through_sigtramp_breakpoint, &step_range_start,
+ &step_range_start,
&step_range_end, &step_frame_id,
&ecs->handling_longjmp, &ecs->another_trap,
&ecs->stepping_through_solib_after_catch,
&ecs->stepping_through_solib_catchpoints,
&ecs->stepping_through_sigtramp,
- &ecs->current_line, &ecs->current_symtab, &step_sp);
+ &ecs->current_line, &ecs->current_symtab);
}
inferior_ptid = ecs->ptid;
}
-/* Handle the inferior event in the cases when we just stepped
- into a function. */
-
-static void
-handle_step_into_function (struct execution_control_state *ecs)
-{
- CORE_ADDR real_stop_pc;
-
- if ((step_over_calls == STEP_OVER_NONE)
- || ((step_range_end == 1)
- && in_prologue (prev_pc, ecs->stop_func_start)))
- {
- /* I presume that step_over_calls is only 0 when we're
- supposed to be stepping at the assembly language level
- ("stepi"). Just stop. */
- /* Also, maybe we just did a "nexti" inside a prolog,
- so we thought it was a subroutine call but it was not.
- Stop as well. FENN */
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
- return;
- }
-
- if (step_over_calls == STEP_OVER_ALL || IGNORE_HELPER_CALL (stop_pc))
- {
- /* We're doing a "next". */
- step_over_function (ecs);
- keep_going (ecs);
- return;
- }
-
- /* If we are in a function call trampoline (a stub between
- the calling routine and the real function), locate the real
- function. That's what tells us (a) whether we want to step
- into it at all, and (b) what prologue we want to run to
- the end of, if we do step into it. */
- real_stop_pc = skip_language_trampoline (stop_pc);
- if (real_stop_pc == 0)
- real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
- if (real_stop_pc != 0)
- ecs->stop_func_start = real_stop_pc;
-
- /* If we have line number information for the function we
- are thinking of stepping into, step into it.
-
- If there are several symtabs at that PC (e.g. with include
- files), just want to know whether *any* of them have line
- numbers. find_pc_line handles this. */
- {
- struct symtab_and_line tmp_sal;
-
- tmp_sal = find_pc_line (ecs->stop_func_start, 0);
- if (tmp_sal.line != 0)
- {
- step_into_function (ecs);
- return;
- }
- }
-
- /* If we have no line number and the step-stop-if-no-debug
- is set, we stop the step so that the user has a chance to
- switch in assembly mode. */
- if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
- {
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
- return;
- }
-
- step_over_function (ecs);
- keep_going (ecs);
- return;
-}
-
static void
adjust_pc_after_break (struct execution_control_state *ecs)
{
- CORE_ADDR stop_pc;
+ CORE_ADDR breakpoint_pc;
/* If this target does not decrement the PC after breakpoints, then
we have nothing to do. */
if (ecs->ws.value.sig != TARGET_SIGNAL_TRAP)
return;
- /* Find the location where (if we've hit a breakpoint) the breakpoint would
- be. */
- stop_pc = read_pc_pid (ecs->ptid) - DECR_PC_AFTER_BREAK;
-
- /* If we're software-single-stepping, then assume this is a breakpoint.
- NOTE drow/2004-01-17: This doesn't check that the PC matches, or that
- we're even in the right thread. The software-single-step code needs
- some modernization.
-
- If we're not software-single-stepping, then we first check that there
- is an enabled software breakpoint at this address. If there is, and
- we weren't using hardware-single-step, then we've hit the breakpoint.
-
- If we were using hardware-single-step, we check prev_pc; if we just
- stepped over an inserted software breakpoint, then we should decrement
- the PC and eventually report hitting the breakpoint. The prev_pc check
- prevents us from decrementing the PC if we just stepped over a jump
- instruction and landed on the instruction after a breakpoint.
-
- The last bit checks that we didn't hit a breakpoint in a signal handler
- without an intervening stop in sigtramp, which is detected by a new
- stack pointer value below any usual function calling stack adjustments.
-
- NOTE drow/2004-01-17: I'm not sure that this is necessary. The check
- predates checking for software single step at the same time. Also,
- if we've moved into a signal handler we should have seen the
- signal. */
-
- if ((SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- || (software_breakpoint_inserted_here_p (stop_pc)
- && !(currently_stepping (ecs)
- && prev_pc != stop_pc
- && !(step_range_end && INNER_THAN (read_sp (), (step_sp - 16))))))
- write_pc_pid (stop_pc, ecs->ptid);
+ /* Find the location where (if we've hit a breakpoint) the
+ breakpoint would be. */
+ breakpoint_pc = read_pc_pid (ecs->ptid) - DECR_PC_AFTER_BREAK;
+
+ if (SOFTWARE_SINGLE_STEP_P ())
+ {
+ /* When using software single-step, a SIGTRAP can only indicate
+ an inserted breakpoint. This actually makes things
+ easier. */
+ if (singlestep_breakpoints_inserted_p)
+ /* When software single stepping, the instruction at [prev_pc]
+ is never a breakpoint, but the instruction following
+ [prev_pc] (in program execution order) always is. Assume
+ that following instruction was reached and hence a software
+ breakpoint was hit. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ else if (software_breakpoint_inserted_here_p (breakpoint_pc))
+ /* The inferior was free running (i.e., no single-step
+ breakpoints inserted) and it hit a software breakpoint. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ }
+ else
+ {
+ /* When using hardware single-step, a SIGTRAP is reported for
+ both a completed single-step and a software breakpoint. Need
+ to differentiate between the two as the latter needs
+ adjusting but the former does not. */
+ if (currently_stepping (ecs))
+ {
+ if (prev_pc == breakpoint_pc
+ && software_breakpoint_inserted_here_p (breakpoint_pc))
+ /* Hardware single-stepped a software breakpoint (as
+ occures when the inferior is resumed with PC pointing
+ at not-yet-hit software breakpoint). Since the
+ breakpoint really is executed, the inferior needs to be
+ backed up to the breakpoint address. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ }
+ else
+ {
+ if (software_breakpoint_inserted_here_p (breakpoint_pc))
+ /* The inferior was free running (i.e., no hardware
+ single-step and no possibility of a false SIGTRAP) and
+ hit a software breakpoint. */
+ write_pc_pid (breakpoint_pc, ecs->ptid);
+ }
+ }
}
/* Given an execution control state that has been freshly filled in
defined in the file "config/pa/nm-hppah.h", accesses the variable
indirectly. Mutter something rude about the HP merge. */
int sw_single_step_trap_p = 0;
+ int stopped_by_watchpoint = 0;
/* Cache the last pid/waitstatus. */
target_last_wait_ptid = ecs->ptid;
/* If it's a new process, add it to the thread database */
ecs->new_thread_event = (!ptid_equal (ecs->ptid, inferior_ptid)
+ && !ptid_equal (ecs->ptid, minus_one_ptid)
&& !in_thread_list (ecs->ptid));
if (ecs->ws.kind != TARGET_WAITKIND_EXITED
stop_pc = read_pc ();
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
ecs->saved_inferior_ptid = inferior_ptid;
inferior_ptid = ecs->ptid;
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
inferior_ptid = ecs->saved_inferior_ptid;
/* It may be possible to simply continue after a watchpoint. */
if (HAVE_CONTINUABLE_WATCHPOINT)
- STOPPED_BY_WATCHPOINT (ecs->ws);
+ stopped_by_watchpoint = STOPPED_BY_WATCHPOINT (ecs->ws);
ecs->stop_func_start = 0;
ecs->stop_func_end = 0;
return;
}
- /* Don't even think about breakpoints
- if just proceeded over a breakpoint.
-
- However, if we are trying to proceed over a breakpoint
- and end up in sigtramp, then through_sigtramp_breakpoint
- will be set and we should check whether we've hit the
- step breakpoint. */
- if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
- && through_sigtramp_breakpoint == NULL)
+ /* Don't even think about breakpoints if just proceeded over a
+ breakpoint. */
+ if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected)
bpstat_clear (&stop_bpstat);
else
{
/* See if there is a breakpoint at the current PC. */
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid,
+ stopped_by_watchpoint);
/* Following in case break condition called a
function. */
if (signal_program[stop_signal] == 0)
stop_signal = TARGET_SIGNAL_0;
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going.
-
- This used to jump to step_over_function if we are stepping,
- which is wrong.
-
- Suppose the user does a `next' over a function call, and while
- that call is in progress, the inferior receives a signal for
- which GDB does not stop (i.e., signal_stop[SIG] is false). In
- that case, when we reach this point, there is already a
- step-resume breakpoint established, right where it should be:
- immediately after the function call the user is "next"-ing
- over. If we call step_over_function now, two bad things
- happen:
-
- - we'll create a new breakpoint, at wherever the current
- frame's return address happens to be. That could be
- anywhere, depending on what function call happens to be on
- the top of the stack at that point. Point is, it's probably
- not where we need it.
-
- - the existing step-resume breakpoint (which is at the correct
- address) will get orphaned: step_resume_breakpoint will point
- to the new breakpoint, and the old step-resume breakpoint
- will never be cleaned up.
-
- The old behavior was meant to help HP-UX single-step out of
- sigtramps. It would place the new breakpoint at prev_pc, which
- was certainly wrong. I don't know the details there, so fixing
- this probably breaks that. As with anything else, it's up to
- the HP-UX maintainer to furnish a fix that doesn't break other
- platforms. --JimB, 20 May 1999 */
- check_sigtramp2 (ecs);
+ if (step_range_end != 0
+ && stop_signal != TARGET_SIGNAL_0
+ && stop_pc >= step_range_start && stop_pc < step_range_end
+ && frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id))
+ {
+ /* The inferior is about to take a signal that will take it
+ out of the single step range. Set a breakpoint at the
+ current PC (which is presumably where the signal handler
+ will eventually return) and then allow the inferior to
+ run free.
+
+ Note that this is only needed for a signal delivered
+ while in the single-step range. Nested signals aren't a
+ problem as they eventually all return. */
+ insert_step_resume_breakpoint (get_current_frame (), ecs);
+ }
keep_going (ecs);
return;
}
if (what.call_dummy)
{
stop_stack_dummy = 1;
-#ifdef HP_OS_BUG
- trap_expected_after_continue = 1;
-#endif
}
switch (what.main_action)
{
delete_step_resume_breakpoint (&step_resume_breakpoint);
}
- /* Not sure whether we need to blow this away too, but probably
- it is like the step-resume breakpoint. */
- if (through_sigtramp_breakpoint != NULL)
- {
- delete_breakpoint (through_sigtramp_breakpoint);
- through_sigtramp_breakpoint = NULL;
- }
#if 0
/* FIXME - Need to implement nested temporary breakpoints */
case BPSTAT_WHAT_STOP_NOISY:
stop_print_frame = 1;
- /* We are about to nuke the step_resume_breakpoint and
- through_sigtramp_breakpoint via the cleanup chain, so
- no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpointt via the
+ cleanup chain, so no need to worry about it here. */
stop_stepping (ecs);
return;
case BPSTAT_WHAT_STOP_SILENT:
stop_print_frame = 0;
- /* We are about to nuke the step_resume_breakpoint and
- through_sigtramp_breakpoint via the cleanup chain, so
- no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpoin via the
+ cleanup chain, so no need to worry about it here. */
stop_stepping (ecs);
return;
break;
case BPSTAT_WHAT_THROUGH_SIGTRAMP:
- if (through_sigtramp_breakpoint)
- delete_breakpoint (through_sigtramp_breakpoint);
- through_sigtramp_breakpoint = NULL;
-
/* If were waiting for a trap, hitting the step_resume_break
doesn't count as getting it. */
if (trap_expected)
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
that breakpoint is reached. */
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going. */
- check_sigtramp2 (ecs);
keep_going (ecs);
return;
}
if (step_range_end == 0)
{
/* Likewise if we aren't even stepping. */
- /* I'm not sure whether this needs to be check_sigtramp2 or
- whether it could/should be keep_going. */
- check_sigtramp2 (ecs);
keep_going (ecs);
return;
}
within it! */
if (stop_pc >= step_range_start && stop_pc < step_range_end)
{
- /* We might be doing a BPSTAT_WHAT_SINGLE and getting a signal.
- So definately need to check for sigtramp here. */
- check_sigtramp2 (ecs);
keep_going (ecs);
return;
}
return;
}
- /* We can't update step_sp every time through the loop, because
- reading the stack pointer would slow down stepping too much.
- But we can update it every time we leave the step range. */
- ecs->update_step_sp = 1;
+ if (step_range_end != 1
+ && (step_over_calls == STEP_OVER_UNDEBUGGABLE
+ || step_over_calls == STEP_OVER_ALL)
+ && get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME)
+ {
+ /* The inferior, while doing a "step" or "next", has ended up in
+ a signal trampoline (either by a signal being delivered or by
+ the signal handler returning). Just single-step until the
+ inferior leaves the trampoline (either by calling the handler
+ or returning). */
+ keep_going (ecs);
+ return;
+ }
- /* Did we just step into a singal trampoline (either by stepping out
- of a handler, or by taking a signal)? */
- if (get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME
- && !frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id))
+ if (step_over_calls == STEP_OVER_UNDEBUGGABLE
+ && ecs->stop_func_name == NULL)
+ {
+ /* The inferior just stepped into, or returned to, an
+ undebuggable function (where there is no symbol, not even a
+ minimal symbol, corresponding to the address where the
+ inferior stopped). Since we want to skip this kind of code,
+ we keep going until the inferior returns from this
+ function. */
+ if (step_stop_if_no_debug)
+ {
+ /* If we have no line number and the step-stop-if-no-debug
+ is set, we stop the step so that the user has a chance to
+ switch in assembly mode. */
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
+ else
+ {
+ /* Set a breakpoint at callee's return address (the address
+ at which the caller will resume). */
+ insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()),
+ ecs);
+ keep_going (ecs);
+ return;
+ }
+ }
+
+ if (frame_id_eq (frame_unwind_id (get_current_frame ()),
+ step_frame_id))
{
+ /* It's a subroutine call. */
+ CORE_ADDR real_stop_pc;
+
+ if ((step_over_calls == STEP_OVER_NONE)
+ || ((step_range_end == 1)
+ && in_prologue (prev_pc, ecs->stop_func_start)))
+ {
+ /* I presume that step_over_calls is only 0 when we're
+ supposed to be stepping at the assembly language level
+ ("stepi"). Just stop. */
+ /* Also, maybe we just did a "nexti" inside a prolog, so we
+ thought it was a subroutine call but it was not. Stop as
+ well. FENN */
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
+
+ if (step_over_calls == STEP_OVER_ALL || IGNORE_HELPER_CALL (stop_pc))
+ {
+ /* We're doing a "next", set a breakpoint at callee's return
+ address (the address at which the caller will
+ resume). */
+ insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()),
+ ecs);
+ keep_going (ecs);
+ return;
+ }
+
+ /* If we are in a function call trampoline (a stub between the
+ calling routine and the real function), locate the real
+ function. That's what tells us (a) whether we want to step
+ into it at all, and (b) what prologue we want to run to the
+ end of, if we do step into it. */
+ real_stop_pc = skip_language_trampoline (stop_pc);
+ if (real_stop_pc == 0)
+ real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ if (real_stop_pc != 0)
+ ecs->stop_func_start = real_stop_pc;
+
+ /* If we have line number information for the function we are
+ thinking of stepping into, step into it.
+
+ If there are several symtabs at that PC (e.g. with include
+ files), just want to know whether *any* of them have line
+ numbers. find_pc_line handles this. */
{
- struct frame_id current_frame = get_frame_id (get_current_frame ());
-
- if (frame_id_inner (current_frame, step_frame_id))
+ struct symtab_and_line tmp_sal;
+
+ tmp_sal = find_pc_line (ecs->stop_func_start, 0);
+ if (tmp_sal.line != 0)
{
- /* We have just taken a signal; go until we are back to
- the point where we took it and one more. */
-
- /* This code is needed at least in the following case:
- The user types "next" and then a signal arrives (before
- the "next" is done). */
-
- /* Note that if we are stopped at a breakpoint, then we need
- the step_resume breakpoint to override any breakpoints at
- the same location, so that we will still step over the
- breakpoint even though the signal happened. */
- struct symtab_and_line sr_sal;
-
- init_sal (&sr_sal);
- sr_sal.symtab = NULL;
- sr_sal.line = 0;
- sr_sal.pc = prev_pc;
- /* We could probably be setting the frame to
- step_frame_id; I don't think anyone thought to try it. */
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
- }
- else
- {
- /* We just stepped out of a signal handler and into
- its calling trampoline.
-
- Normally, we'd call step_over_function from
- here, but for some reason GDB can't unwind the
- stack correctly to find the real PC for the point
- user code where the signal trampoline will return
- -- FRAME_SAVED_PC fails, at least on HP-UX 10.20.
- But signal trampolines are pretty small stubs of
- code, anyway, so it's OK instead to just
- single-step out. Note: assuming such trampolines
- don't exhibit recursion on any platform... */
- find_pc_partial_function (stop_pc, &ecs->stop_func_name,
- &ecs->stop_func_start,
- &ecs->stop_func_end);
- /* Readjust stepping range */
- step_range_start = ecs->stop_func_start;
- step_range_end = ecs->stop_func_end;
- ecs->stepping_through_sigtramp = 1;
+ step_into_function (ecs);
+ return;
}
}
+ /* If we have no line number and the step-stop-if-no-debug is
+ set, we stop the step so that the user has a chance to switch
+ in assembly mode. */
+ if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
+ {
+ stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
+ }
- /* If this is stepi or nexti, make sure that the stepping range
- gets us past that instruction. */
- if (step_range_end == 1)
- /* FIXME: Does this run afoul of the code below which, if
- we step into the middle of a line, resets the stepping
- range? */
- step_range_end = (step_range_start = prev_pc) + 1;
-
- ecs->remove_breakpoints_on_following_step = 1;
+ /* Set a breakpoint at callee's return address (the address at
+ which the caller will resume). */
+ insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()), ecs);
keep_going (ecs);
return;
}
- if (((stop_pc == ecs->stop_func_start /* Quick test */
- || in_prologue (stop_pc, ecs->stop_func_start))
- && !IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
- || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, ecs->stop_func_name)
- || ecs->stop_func_name == 0)
- {
- /* It's a subroutine call. */
- handle_step_into_function (ecs);
- return;
- }
-
/* We've wandered out of the step range. */
ecs->sal = find_pc_line (stop_pc, 0);
static int
currently_stepping (struct execution_control_state *ecs)
{
- return ((through_sigtramp_breakpoint == NULL
- && !ecs->handling_longjmp
+ return ((!ecs->handling_longjmp
&& ((step_range_end && step_resume_breakpoint == NULL)
|| trap_expected))
|| ecs->stepping_through_solib_after_catch
|| bpstat_should_step ());
}
-static void
-check_sigtramp2 (struct execution_control_state *ecs)
-{
- char *name;
- struct symtab_and_line sr_sal;
-
- /* Check that what has happened here is that we have just stepped
- the inferior with a signal (because it is a signal which
- shouldn't make us stop), thus stepping into sigtramp. */
-
- if (!trap_expected)
- return;
- if (get_frame_type (get_current_frame ()) != SIGTRAMP_FRAME)
- return;
- /* Long term, this function can be eliminated, replaced by the code:
- get_frame_type(current_frame()) == SIGTRAMP_FRAME (for new
- architectures this is very cheap). */
- find_pc_partial_function (prev_pc, &name, NULL, NULL);
- if (DEPRECATED_PC_IN_SIGTRAMP (prev_pc, name))
- return;
- if (!INNER_THAN (read_sp (), step_sp))
- return;
-
- /* So we need to set a step_resume_break_address breakpoint and
- continue until we hit it, and then step. FIXME: This should be
- more enduring than a step_resume breakpoint; we should know that
- we will later need to keep going rather than re-hitting the
- breakpoint here (see the testsuite, gdb.base/signals.exp where it
- says "exceedingly difficult"). */
-
- init_sal (&sr_sal); /* initialize to zeroes */
- sr_sal.pc = prev_pc;
- sr_sal.section = find_pc_overlay (sr_sal.pc);
- /* We perhaps could set the frame if we kept track of what the frame
- corresponding to prev_pc was. But we don't, so don't. */
- through_sigtramp_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_through_sigtramp);
- if (breakpoints_inserted)
- insert_breakpoints ();
-
- ecs->remove_breakpoints_on_following_step = 1;
- ecs->another_trap = 1;
-}
-
/* Subroutine call with source code we should not step over. Do step
to the first line of code in it. */
keep_going (ecs);
}
-/* We've just entered a callee, and we wish to resume until it returns
- to the caller. Setting a step_resume breakpoint on the return
- address will catch a return from the callee.
-
- However, if the callee is recursing, we want to be careful not to
- catch returns of those recursive calls, but only of THIS instance
- of the caller.
-
- To do this, we set the step_resume bp's frame to our current
- caller's frame (obtained by doing a frame ID unwind). */
+/* The inferior, as a result of a function call (has left) or signal
+ (about to leave) the single-step range. Set a momentary breakpoint
+ within the step range where the inferior is expected to later
+ return. */
static void
-step_over_function (struct execution_control_state *ecs)
+insert_step_resume_breakpoint (struct frame_info *step_frame,
+ struct execution_control_state *ecs)
{
struct symtab_and_line sr_sal;
- struct frame_id sr_id;
-
- init_sal (&sr_sal); /* initialize to zeros */
-
- /* NOTE: cagney/2003-04-06:
- At this point the equality get_frame_pc() == get_frame_func()
- should hold. This may make it possible for this code to tell the
- frame where it's function is, instead of the reverse. This would
- avoid the need to search for the frame's function, which can get
- very messy when there is no debug info available (look at the
- heuristic find pc start code found in targets like the MIPS). */
+ /* This is only used within the step-resume range/frame. */
+ gdb_assert (frame_id_eq (step_frame_id, get_frame_id (step_frame)));
+ gdb_assert (step_range_end != 0);
+ /* Remember, if the call instruction is the last in the step range,
+ the breakpoint will land just beyond that. Hence ``<=
+ step_range_end''. Also, ignore check when "nexti". */
+ gdb_assert (step_range_start == step_range_end
+ || (get_frame_pc (step_frame) >= step_range_start
+ && get_frame_pc (step_frame) <= step_range_end));
- /* NOTE: cagney/2003-04-06:
-
- The intent of DEPRECATED_SAVED_PC_AFTER_CALL was to:
-
- - provide a very light weight equivalent to frame_unwind_pc()
- (nee FRAME_SAVED_PC) that avoids the prologue analyzer
-
- - avoid handling the case where the PC hasn't been saved in the
- prologue analyzer
+ init_sal (&sr_sal); /* initialize to zeros */
- Unfortunately, not five lines further down, is a call to
- get_frame_id() and that is guarenteed to trigger the prologue
- analyzer.
-
- The `correct fix' is for the prologe analyzer to handle the case
- where the prologue is incomplete (PC in prologue) and,
- consequently, the return pc has not yet been saved. It should be
- noted that the prologue analyzer needs to handle this case
- anyway: frameless leaf functions that don't save the return PC;
- single stepping through a prologue.
-
- The d10v handles all this by bailing out of the prologue analsis
- when it reaches the current instruction. */
-
- if (DEPRECATED_SAVED_PC_AFTER_CALL_P ())
- sr_sal.pc = ADDR_BITS_REMOVE (DEPRECATED_SAVED_PC_AFTER_CALL (get_current_frame ()));
- else
- sr_sal.pc = ADDR_BITS_REMOVE (frame_pc_unwind (get_current_frame ()));
+ sr_sal.pc = ADDR_BITS_REMOVE (get_frame_pc (step_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
check_for_old_step_resume_breakpoint ();
- /* NOTE: cagney/2004-03-31: Code using the current value of
- "step_frame_id", instead of unwinding that frame ID, removed. On
- s390 GNU/Linux, after taking a signal, the program is directly
- resumed at the signal handler and, consequently, the PC would
- point at at the first instruction of that signal handler but
- STEP_FRAME_ID would [incorrectly] at the interrupted code when it
- should point at the signal trampoline. By always and locally
- doing a frame ID unwind, it's possible to assert that the code is
- always using the correct ID. */
- sr_id = frame_unwind_id (get_current_frame ());
-
- step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id, bp_step_resume);
+ step_resume_breakpoint
+ = set_momentary_breakpoint (sr_sal, get_frame_id (step_frame),
+ bp_step_resume);
if (breakpoints_inserted)
insert_breakpoints ();
/* Save the pc before execution, to compare with pc after stop. */
prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
- if (ecs->update_step_sp)
- step_sp = read_sp ();
- ecs->update_step_sp = 0;
-
/* If we did not do break;, it means we should keep running the
inferior and not return to debugger. */
/* If we've just finished a special step resume and we don't
want to hit a breakpoint, pull em out. */
if (step_resume_breakpoint == NULL
- && through_sigtramp_breakpoint == NULL
&& ecs->remove_breakpoints_on_following_step)
{
ecs->remove_breakpoints_on_following_step = 0;
remove_breakpoints ();
breakpoints_inserted = 0;
}
- else if (!breakpoints_inserted &&
- (through_sigtramp_breakpoint != NULL || !ecs->another_trap))
+ else if (!breakpoints_inserted && !ecs->another_trap)
{
breakpoints_failed = insert_breakpoints ();
if (breakpoints_failed)
LOCATION: Print only location
SRC_AND_LOC: Print location and source line */
if (do_frame_printing)
- print_stack_frame (deprecated_selected_frame, -1, source_flag);
+ print_stack_frame (get_selected_frame (), 0, source_flag);
/* Display the auto-display expressions. */
do_displays ();
projects / deliverable / binutils-gdb.git / blobdiff