/* GNU/Linux native-dependent code common to multiple platforms.
- Copyright (C) 2003 Free Software Foundation, Inc.
+
+ Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "inferior.h"
#include "target.h"
-
+#include "gdb_string.h"
#include "gdb_wait.h"
+#include "gdb_assert.h"
+#ifdef HAVE_TKILL_SYSCALL
+#include <unistd.h>
+#include <sys/syscall.h>
+#endif
#include <sys/ptrace.h>
+#include "linux-nat.h"
+#include "linux-fork.h"
+#include "gdbthread.h"
+#include "gdbcmd.h"
+#include "regcache.h"
+#include "regset.h"
+#include "inf-ptrace.h"
+#include "auxv.h"
+#include <sys/param.h> /* for MAXPATHLEN */
+#include <sys/procfs.h> /* for elf_gregset etc. */
+#include "elf-bfd.h" /* for elfcore_write_* */
+#include "gregset.h" /* for gregset */
+#include "gdbcore.h" /* for get_exec_file */
+#include <ctype.h> /* for isdigit */
+#include "gdbthread.h" /* for struct thread_info etc. */
+#include "gdb_stat.h" /* for struct stat */
+#include <fcntl.h> /* for O_RDONLY */
+
+#ifndef O_LARGEFILE
+#define O_LARGEFILE 0
+#endif
/* If the system headers did not provide the constants, hard-code the normal
values. */
#define PTRACE_O_TRACEVFORK 0x00000004
#define PTRACE_O_TRACECLONE 0x00000008
#define PTRACE_O_TRACEEXEC 0x00000010
+#define PTRACE_O_TRACEVFORKDONE 0x00000020
+#define PTRACE_O_TRACEEXIT 0x00000040
/* Wait extended result codes for the above trace options. */
#define PTRACE_EVENT_FORK 1
#define PTRACE_EVENT_VFORK 2
#define PTRACE_EVENT_CLONE 3
#define PTRACE_EVENT_EXEC 4
+#define PTRACE_EVENT_VFORK_DONE 5
+#define PTRACE_EVENT_EXIT 6
#endif /* PTRACE_EVENT_FORK */
#define __WALL 0x40000000 /* Wait for any child. */
#endif
+/* The single-threaded native GNU/Linux target_ops. We save a pointer for
+ the use of the multi-threaded target. */
+static struct target_ops *linux_ops;
+static struct target_ops linux_ops_saved;
+
+/* The saved to_xfer_partial method, inherited from inf-ptrace.c.
+ Called by our to_xfer_partial. */
+static LONGEST (*super_xfer_partial) (struct target_ops *,
+ enum target_object,
+ const char *, gdb_byte *,
+ const gdb_byte *,
+ ULONGEST, LONGEST);
+
+static int debug_linux_nat;
+static void
+show_debug_linux_nat (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Debugging of GNU/Linux lwp module is %s.\n"),
+ value);
+}
+
+static int linux_parent_pid;
+
struct simple_pid_list
{
int pid;
static int linux_supports_tracefork_flag = -1;
+/* If we have PTRACE_O_TRACEFORK, this flag indicates whether we also have
+ PTRACE_O_TRACEVFORKDONE. */
+
+static int linux_supports_tracevforkdone_flag = -1;
+
\f
/* Trivial list manipulation functions to keep track of a list of
new stopped processes. */
ptrace (PTRACE_TRACEME, 0, 0, 0);
kill (getpid (), SIGSTOP);
fork ();
- exit (0);
+ _exit (0);
+}
+
+/* Wrapper function for waitpid which handles EINTR. */
+
+static int
+my_waitpid (int pid, int *status, int flags)
+{
+ int ret;
+ do
+ {
+ ret = waitpid (pid, status, flags);
+ }
+ while (ret == -1 && errno == EINTR);
+
+ return ret;
}
-/* Determine if PTRACE_O_TRACEFORK can be used to follow fork events. We
+/* Determine if PTRACE_O_TRACEFORK can be used to follow fork events.
+
+ First, we try to enable fork tracing on ORIGINAL_PID. If this fails,
+ we know that the feature is not available. This may change the tracing
+ options for ORIGINAL_PID, but we'll be setting them shortly anyway.
+
+ However, if it succeeds, we don't know for sure that the feature is
+ available; old versions of PTRACE_SETOPTIONS ignored unknown options. We
create a child process, attach to it, use PTRACE_SETOPTIONS to enable
- fork tracing, and let it fork. If the process exits, we assume that
- we can't use TRACEFORK; if we get the fork notification, and we can
- extract the new child's PID, then we assume that we can. */
+ fork tracing, and let it fork. If the process exits, we assume that we
+ can't use TRACEFORK; if we get the fork notification, and we can extract
+ the new child's PID, then we assume that we can. */
static void
-linux_test_for_tracefork (void)
+linux_test_for_tracefork (int original_pid)
{
int child_pid, ret, status;
long second_pid;
+ linux_supports_tracefork_flag = 0;
+ linux_supports_tracevforkdone_flag = 0;
+
+ ret = ptrace (PTRACE_SETOPTIONS, original_pid, 0, PTRACE_O_TRACEFORK);
+ if (ret != 0)
+ return;
+
child_pid = fork ();
if (child_pid == -1)
- perror_with_name ("linux_test_for_tracefork: fork");
+ perror_with_name (("fork"));
if (child_pid == 0)
linux_tracefork_child ();
- ret = waitpid (child_pid, &status, 0);
+ ret = my_waitpid (child_pid, &status, 0);
if (ret == -1)
- perror_with_name ("linux_test_for_tracefork: waitpid");
+ perror_with_name (("waitpid"));
else if (ret != child_pid)
- error ("linux_test_for_tracefork: waitpid: unexpected result %d.", ret);
+ error (_("linux_test_for_tracefork: waitpid: unexpected result %d."), ret);
if (! WIFSTOPPED (status))
- error ("linux_test_for_tracefork: waitpid: unexpected status %d.", status);
-
- linux_supports_tracefork_flag = 0;
+ error (_("linux_test_for_tracefork: waitpid: unexpected status %d."), status);
ret = ptrace (PTRACE_SETOPTIONS, child_pid, 0, PTRACE_O_TRACEFORK);
if (ret != 0)
{
- ptrace (PTRACE_KILL, child_pid, 0, 0);
- waitpid (child_pid, &status, 0);
+ ret = ptrace (PTRACE_KILL, child_pid, 0, 0);
+ if (ret != 0)
+ {
+ warning (_("linux_test_for_tracefork: failed to kill child"));
+ return;
+ }
+
+ ret = my_waitpid (child_pid, &status, 0);
+ if (ret != child_pid)
+ warning (_("linux_test_for_tracefork: failed to wait for killed child"));
+ else if (!WIFSIGNALED (status))
+ warning (_("linux_test_for_tracefork: unexpected wait status 0x%x from "
+ "killed child"), status);
+
return;
}
- ptrace (PTRACE_CONT, child_pid, 0, 0);
- ret = waitpid (child_pid, &status, 0);
+ /* Check whether PTRACE_O_TRACEVFORKDONE is available. */
+ ret = ptrace (PTRACE_SETOPTIONS, child_pid, 0,
+ PTRACE_O_TRACEFORK | PTRACE_O_TRACEVFORKDONE);
+ linux_supports_tracevforkdone_flag = (ret == 0);
+
+ ret = ptrace (PTRACE_CONT, child_pid, 0, 0);
+ if (ret != 0)
+ warning (_("linux_test_for_tracefork: failed to resume child"));
+
+ ret = my_waitpid (child_pid, &status, 0);
+
if (ret == child_pid && WIFSTOPPED (status)
&& status >> 16 == PTRACE_EVENT_FORK)
{
int second_status;
linux_supports_tracefork_flag = 1;
- waitpid (second_pid, &second_status, 0);
- ptrace (PTRACE_DETACH, second_pid, 0, 0);
+ my_waitpid (second_pid, &second_status, 0);
+ ret = ptrace (PTRACE_KILL, second_pid, 0, 0);
+ if (ret != 0)
+ warning (_("linux_test_for_tracefork: failed to kill second child"));
+ my_waitpid (second_pid, &status, 0);
}
}
+ else
+ warning (_("linux_test_for_tracefork: unexpected result from waitpid "
+ "(%d, status 0x%x)"), ret, status);
- if (WIFSTOPPED (status))
- {
- ptrace (PTRACE_DETACH, child_pid, 0, 0);
- waitpid (child_pid, &status, 0);
- }
+ ret = ptrace (PTRACE_KILL, child_pid, 0, 0);
+ if (ret != 0)
+ warning (_("linux_test_for_tracefork: failed to kill child"));
+ my_waitpid (child_pid, &status, 0);
}
/* Return non-zero iff we have tracefork functionality available.
This function also sets linux_supports_tracefork_flag. */
static int
-linux_supports_tracefork (void)
+linux_supports_tracefork (int pid)
{
if (linux_supports_tracefork_flag == -1)
- linux_test_for_tracefork ();
+ linux_test_for_tracefork (pid);
return linux_supports_tracefork_flag;
}
+static int
+linux_supports_tracevforkdone (int pid)
+{
+ if (linux_supports_tracefork_flag == -1)
+ linux_test_for_tracefork (pid);
+ return linux_supports_tracevforkdone_flag;
+}
+
\f
+void
+linux_enable_event_reporting (ptid_t ptid)
+{
+ int pid = ptid_get_lwp (ptid);
+ int options;
+
+ if (pid == 0)
+ pid = ptid_get_pid (ptid);
+
+ if (! linux_supports_tracefork (pid))
+ return;
+
+ options = PTRACE_O_TRACEFORK | PTRACE_O_TRACEVFORK | PTRACE_O_TRACEEXEC
+ | PTRACE_O_TRACECLONE;
+ if (linux_supports_tracevforkdone (pid))
+ options |= PTRACE_O_TRACEVFORKDONE;
+
+ /* Do not enable PTRACE_O_TRACEEXIT until GDB is more prepared to support
+ read-only process state. */
+
+ ptrace (PTRACE_SETOPTIONS, pid, 0, options);
+}
+
+void
+child_post_attach (int pid)
+{
+ linux_enable_event_reporting (pid_to_ptid (pid));
+ check_for_thread_db ();
+}
+
+static void
+linux_child_post_startup_inferior (ptid_t ptid)
+{
+ linux_enable_event_reporting (ptid);
+ check_for_thread_db ();
+}
+
int
-child_insert_fork_catchpoint (int pid)
+child_follow_fork (struct target_ops *ops, int follow_child)
{
- if (linux_supports_tracefork ())
- error ("Fork catchpoints have not been implemented yet.");
+ ptid_t last_ptid;
+ struct target_waitstatus last_status;
+ int has_vforked;
+ int parent_pid, child_pid;
+
+ get_last_target_status (&last_ptid, &last_status);
+ has_vforked = (last_status.kind == TARGET_WAITKIND_VFORKED);
+ parent_pid = ptid_get_lwp (last_ptid);
+ if (parent_pid == 0)
+ parent_pid = ptid_get_pid (last_ptid);
+ child_pid = last_status.value.related_pid;
+
+ if (! follow_child)
+ {
+ /* We're already attached to the parent, by default. */
+
+ /* Before detaching from the child, remove all breakpoints from
+ it. (This won't actually modify the breakpoint list, but will
+ physically remove the breakpoints from the child.) */
+ /* If we vforked this will remove the breakpoints from the parent
+ also, but they'll be reinserted below. */
+ detach_breakpoints (child_pid);
+
+ /* Detach new forked process? */
+ if (detach_fork)
+ {
+ if (debug_linux_nat)
+ {
+ target_terminal_ours ();
+ fprintf_filtered (gdb_stdlog,
+ "Detaching after fork from child process %d.\n",
+ child_pid);
+ }
+
+ ptrace (PTRACE_DETACH, child_pid, 0, 0);
+ }
+ else
+ {
+ struct fork_info *fp;
+ /* Retain child fork in ptrace (stopped) state. */
+ fp = find_fork_pid (child_pid);
+ if (!fp)
+ fp = add_fork (child_pid);
+ fork_save_infrun_state (fp, 0);
+ }
+
+ if (has_vforked)
+ {
+ gdb_assert (linux_supports_tracefork_flag >= 0);
+ if (linux_supports_tracevforkdone (0))
+ {
+ int status;
+
+ ptrace (PTRACE_CONT, parent_pid, 0, 0);
+ my_waitpid (parent_pid, &status, __WALL);
+ if ((status >> 16) != PTRACE_EVENT_VFORK_DONE)
+ warning (_("Unexpected waitpid result %06x when waiting for "
+ "vfork-done"), status);
+ }
+ else
+ {
+ /* We can't insert breakpoints until the child has
+ finished with the shared memory region. We need to
+ wait until that happens. Ideal would be to just
+ call:
+ - ptrace (PTRACE_SYSCALL, parent_pid, 0, 0);
+ - waitpid (parent_pid, &status, __WALL);
+ However, most architectures can't handle a syscall
+ being traced on the way out if it wasn't traced on
+ the way in.
+
+ We might also think to loop, continuing the child
+ until it exits or gets a SIGTRAP. One problem is
+ that the child might call ptrace with PTRACE_TRACEME.
+
+ There's no simple and reliable way to figure out when
+ the vforked child will be done with its copy of the
+ shared memory. We could step it out of the syscall,
+ two instructions, let it go, and then single-step the
+ parent once. When we have hardware single-step, this
+ would work; with software single-step it could still
+ be made to work but we'd have to be able to insert
+ single-step breakpoints in the child, and we'd have
+ to insert -just- the single-step breakpoint in the
+ parent. Very awkward.
+
+ In the end, the best we can do is to make sure it
+ runs for a little while. Hopefully it will be out of
+ range of any breakpoints we reinsert. Usually this
+ is only the single-step breakpoint at vfork's return
+ point. */
+
+ usleep (10000);
+ }
+
+ /* Since we vforked, breakpoints were removed in the parent
+ too. Put them back. */
+ reattach_breakpoints (parent_pid);
+ }
+ }
else
- error ("Your system does not support fork catchpoints.");
+ {
+ char child_pid_spelling[40];
+
+ /* Needed to keep the breakpoint lists in sync. */
+ if (! has_vforked)
+ detach_breakpoints (child_pid);
+
+ /* Before detaching from the parent, remove all breakpoints from it. */
+ remove_breakpoints ();
+
+ if (debug_linux_nat)
+ {
+ target_terminal_ours ();
+ fprintf_filtered (gdb_stdlog,
+ "Attaching after fork to child process %d.\n",
+ child_pid);
+ }
+
+ /* If we're vforking, we may want to hold on to the parent until
+ the child exits or execs. At exec time we can remove the old
+ breakpoints from the parent and detach it; at exit time we
+ could do the same (or even, sneakily, resume debugging it - the
+ child's exec has failed, or something similar).
+
+ This doesn't clean up "properly", because we can't call
+ target_detach, but that's OK; if the current target is "child",
+ then it doesn't need any further cleanups, and lin_lwp will
+ generally not encounter vfork (vfork is defined to fork
+ in libpthread.so).
+
+ The holding part is very easy if we have VFORKDONE events;
+ but keeping track of both processes is beyond GDB at the
+ moment. So we don't expose the parent to the rest of GDB.
+ Instead we quietly hold onto it until such time as we can
+ safely resume it. */
+
+ if (has_vforked)
+ linux_parent_pid = parent_pid;
+ else if (!detach_fork)
+ {
+ struct fork_info *fp;
+ /* Retain parent fork in ptrace (stopped) state. */
+ fp = find_fork_pid (parent_pid);
+ if (!fp)
+ fp = add_fork (parent_pid);
+ fork_save_infrun_state (fp, 0);
+ }
+ else
+ {
+ target_detach (NULL, 0);
+ }
+
+ inferior_ptid = pid_to_ptid (child_pid);
+
+ /* Reinstall ourselves, since we might have been removed in
+ target_detach (which does other necessary cleanup). */
+
+ push_target (ops);
+
+ /* Reset breakpoints in the child as appropriate. */
+ follow_inferior_reset_breakpoints ();
+ }
+
+ return 0;
}
-int
+ptid_t
+linux_handle_extended_wait (int pid, int status,
+ struct target_waitstatus *ourstatus)
+{
+ int event = status >> 16;
+
+ if (event == PTRACE_EVENT_FORK || event == PTRACE_EVENT_VFORK
+ || event == PTRACE_EVENT_CLONE)
+ {
+ unsigned long new_pid;
+ int ret;
+
+ ptrace (PTRACE_GETEVENTMSG, pid, 0, &new_pid);
+
+ /* If we haven't already seen the new PID stop, wait for it now. */
+ if (! pull_pid_from_list (&stopped_pids, new_pid))
+ {
+ /* The new child has a pending SIGSTOP. We can't affect it until it
+ hits the SIGSTOP, but we're already attached. */
+ ret = my_waitpid (new_pid, &status,
+ (event == PTRACE_EVENT_CLONE) ? __WCLONE : 0);
+ if (ret == -1)
+ perror_with_name (_("waiting for new child"));
+ else if (ret != new_pid)
+ internal_error (__FILE__, __LINE__,
+ _("wait returned unexpected PID %d"), ret);
+ else if (!WIFSTOPPED (status) || WSTOPSIG (status) != SIGSTOP)
+ internal_error (__FILE__, __LINE__,
+ _("wait returned unexpected status 0x%x"), status);
+ }
+
+ if (event == PTRACE_EVENT_FORK)
+ ourstatus->kind = TARGET_WAITKIND_FORKED;
+ else if (event == PTRACE_EVENT_VFORK)
+ ourstatus->kind = TARGET_WAITKIND_VFORKED;
+ else
+ ourstatus->kind = TARGET_WAITKIND_SPURIOUS;
+
+ ourstatus->value.related_pid = new_pid;
+ return inferior_ptid;
+ }
+
+ if (event == PTRACE_EVENT_EXEC)
+ {
+ ourstatus->kind = TARGET_WAITKIND_EXECD;
+ ourstatus->value.execd_pathname
+ = xstrdup (child_pid_to_exec_file (pid));
+
+ if (linux_parent_pid)
+ {
+ detach_breakpoints (linux_parent_pid);
+ ptrace (PTRACE_DETACH, linux_parent_pid, 0, 0);
+
+ linux_parent_pid = 0;
+ }
+
+ return inferior_ptid;
+ }
+
+ internal_error (__FILE__, __LINE__,
+ _("unknown ptrace event %d"), event);
+}
+
+\f
+void
+child_insert_fork_catchpoint (int pid)
+{
+ if (! linux_supports_tracefork (pid))
+ error (_("Your system does not support fork catchpoints."));
+}
+
+void
child_insert_vfork_catchpoint (int pid)
{
- if (linux_supports_tracefork ())
- error ("Vfork catchpoints have not been implemented yet.");
- else
- error ("Your system does not support vfork catchpoints.");
+ if (!linux_supports_tracefork (pid))
+ error (_("Your system does not support vfork catchpoints."));
}
-int
+void
child_insert_exec_catchpoint (int pid)
{
- if (linux_supports_tracefork ())
- error ("Exec catchpoints have not been implemented yet.");
+ if (!linux_supports_tracefork (pid))
+ error (_("Your system does not support exec catchpoints."));
+}
+
+/* On GNU/Linux there are no real LWP's. The closest thing to LWP's
+ are processes sharing the same VM space. A multi-threaded process
+ is basically a group of such processes. However, such a grouping
+ is almost entirely a user-space issue; the kernel doesn't enforce
+ such a grouping at all (this might change in the future). In
+ general, we'll rely on the threads library (i.e. the GNU/Linux
+ Threads library) to provide such a grouping.
+
+ It is perfectly well possible to write a multi-threaded application
+ without the assistance of a threads library, by using the clone
+ system call directly. This module should be able to give some
+ rudimentary support for debugging such applications if developers
+ specify the CLONE_PTRACE flag in the clone system call, and are
+ using the Linux kernel 2.4 or above.
+
+ Note that there are some peculiarities in GNU/Linux that affect
+ this code:
+
+ - In general one should specify the __WCLONE flag to waitpid in
+ order to make it report events for any of the cloned processes
+ (and leave it out for the initial process). However, if a cloned
+ process has exited the exit status is only reported if the
+ __WCLONE flag is absent. Linux kernel 2.4 has a __WALL flag, but
+ we cannot use it since GDB must work on older systems too.
+
+ - When a traced, cloned process exits and is waited for by the
+ debugger, the kernel reassigns it to the original parent and
+ keeps it around as a "zombie". Somehow, the GNU/Linux Threads
+ library doesn't notice this, which leads to the "zombie problem":
+ When debugged a multi-threaded process that spawns a lot of
+ threads will run out of processes, even if the threads exit,
+ because the "zombies" stay around. */
+
+/* List of known LWPs. */
+static struct lwp_info *lwp_list;
+
+/* Number of LWPs in the list. */
+static int num_lwps;
+\f
+
+#define GET_LWP(ptid) ptid_get_lwp (ptid)
+#define GET_PID(ptid) ptid_get_pid (ptid)
+#define is_lwp(ptid) (GET_LWP (ptid) != 0)
+#define BUILD_LWP(lwp, pid) ptid_build (pid, lwp, 0)
+
+/* If the last reported event was a SIGTRAP, this variable is set to
+ the process id of the LWP/thread that got it. */
+ptid_t trap_ptid;
+\f
+
+/* Since we cannot wait (in linux_nat_wait) for the initial process and
+ any cloned processes with a single call to waitpid, we have to use
+ the WNOHANG flag and call waitpid in a loop. To optimize
+ things a bit we use `sigsuspend' to wake us up when a process has
+ something to report (it will send us a SIGCHLD if it has). To make
+ this work we have to juggle with the signal mask. We save the
+ original signal mask such that we can restore it before creating a
+ new process in order to avoid blocking certain signals in the
+ inferior. We then block SIGCHLD during the waitpid/sigsuspend
+ loop. */
+
+/* Original signal mask. */
+static sigset_t normal_mask;
+
+/* Signal mask for use with sigsuspend in linux_nat_wait, initialized in
+ _initialize_linux_nat. */
+static sigset_t suspend_mask;
+
+/* Signals to block to make that sigsuspend work. */
+static sigset_t blocked_mask;
+\f
+
+/* Prototypes for local functions. */
+static int stop_wait_callback (struct lwp_info *lp, void *data);
+static int linux_nat_thread_alive (ptid_t ptid);
+\f
+/* Convert wait status STATUS to a string. Used for printing debug
+ messages only. */
+
+static char *
+status_to_str (int status)
+{
+ static char buf[64];
+
+ if (WIFSTOPPED (status))
+ snprintf (buf, sizeof (buf), "%s (stopped)",
+ strsignal (WSTOPSIG (status)));
+ else if (WIFSIGNALED (status))
+ snprintf (buf, sizeof (buf), "%s (terminated)",
+ strsignal (WSTOPSIG (status)));
+ else
+ snprintf (buf, sizeof (buf), "%d (exited)", WEXITSTATUS (status));
+
+ return buf;
+}
+
+/* Initialize the list of LWPs. Note that this module, contrary to
+ what GDB's generic threads layer does for its thread list,
+ re-initializes the LWP lists whenever we mourn or detach (which
+ doesn't involve mourning) the inferior. */
+
+static void
+init_lwp_list (void)
+{
+ struct lwp_info *lp, *lpnext;
+
+ for (lp = lwp_list; lp; lp = lpnext)
+ {
+ lpnext = lp->next;
+ xfree (lp);
+ }
+
+ lwp_list = NULL;
+ num_lwps = 0;
+}
+
+/* Add the LWP specified by PID to the list. Return a pointer to the
+ structure describing the new LWP. */
+
+static struct lwp_info *
+add_lwp (ptid_t ptid)
+{
+ struct lwp_info *lp;
+
+ gdb_assert (is_lwp (ptid));
+
+ lp = (struct lwp_info *) xmalloc (sizeof (struct lwp_info));
+
+ memset (lp, 0, sizeof (struct lwp_info));
+
+ lp->waitstatus.kind = TARGET_WAITKIND_IGNORE;
+
+ lp->ptid = ptid;
+
+ lp->next = lwp_list;
+ lwp_list = lp;
+ ++num_lwps;
+
+ return lp;
+}
+
+/* Remove the LWP specified by PID from the list. */
+
+static void
+delete_lwp (ptid_t ptid)
+{
+ struct lwp_info *lp, *lpprev;
+
+ lpprev = NULL;
+
+ for (lp = lwp_list; lp; lpprev = lp, lp = lp->next)
+ if (ptid_equal (lp->ptid, ptid))
+ break;
+
+ if (!lp)
+ return;
+
+ num_lwps--;
+
+ if (lpprev)
+ lpprev->next = lp->next;
+ else
+ lwp_list = lp->next;
+
+ xfree (lp);
+}
+
+/* Return a pointer to the structure describing the LWP corresponding
+ to PID. If no corresponding LWP could be found, return NULL. */
+
+static struct lwp_info *
+find_lwp_pid (ptid_t ptid)
+{
+ struct lwp_info *lp;
+ int lwp;
+
+ if (is_lwp (ptid))
+ lwp = GET_LWP (ptid);
+ else
+ lwp = GET_PID (ptid);
+
+ for (lp = lwp_list; lp; lp = lp->next)
+ if (lwp == GET_LWP (lp->ptid))
+ return lp;
+
+ return NULL;
+}
+
+/* Call CALLBACK with its second argument set to DATA for every LWP in
+ the list. If CALLBACK returns 1 for a particular LWP, return a
+ pointer to the structure describing that LWP immediately.
+ Otherwise return NULL. */
+
+struct lwp_info *
+iterate_over_lwps (int (*callback) (struct lwp_info *, void *), void *data)
+{
+ struct lwp_info *lp, *lpnext;
+
+ for (lp = lwp_list; lp; lp = lpnext)
+ {
+ lpnext = lp->next;
+ if ((*callback) (lp, data))
+ return lp;
+ }
+
+ return NULL;
+}
+
+/* Update our internal state when changing from one fork (checkpoint,
+ et cetera) to another indicated by NEW_PTID. We can only switch
+ single-threaded applications, so we only create one new LWP, and
+ the previous list is discarded. */
+
+void
+linux_nat_switch_fork (ptid_t new_ptid)
+{
+ struct lwp_info *lp;
+
+ init_lwp_list ();
+ lp = add_lwp (new_ptid);
+ lp->stopped = 1;
+}
+
+/* Record a PTID for later deletion. */
+
+struct saved_ptids
+{
+ ptid_t ptid;
+ struct saved_ptids *next;
+};
+static struct saved_ptids *threads_to_delete;
+
+static void
+record_dead_thread (ptid_t ptid)
+{
+ struct saved_ptids *p = xmalloc (sizeof (struct saved_ptids));
+ p->ptid = ptid;
+ p->next = threads_to_delete;
+ threads_to_delete = p;
+}
+
+/* Delete any dead threads which are not the current thread. */
+
+static void
+prune_lwps (void)
+{
+ struct saved_ptids **p = &threads_to_delete;
+
+ while (*p)
+ if (! ptid_equal ((*p)->ptid, inferior_ptid))
+ {
+ struct saved_ptids *tmp = *p;
+ delete_thread (tmp->ptid);
+ *p = tmp->next;
+ xfree (tmp);
+ }
+ else
+ p = &(*p)->next;
+}
+
+/* Callback for iterate_over_threads that finds a thread corresponding
+ to the given LWP. */
+
+static int
+find_thread_from_lwp (struct thread_info *thr, void *dummy)
+{
+ ptid_t *ptid_p = dummy;
+
+ if (GET_LWP (thr->ptid) && GET_LWP (thr->ptid) == GET_LWP (*ptid_p))
+ return 1;
+ else
+ return 0;
+}
+
+/* Handle the exit of a single thread LP. */
+
+static void
+exit_lwp (struct lwp_info *lp)
+{
+ if (in_thread_list (lp->ptid))
+ {
+ /* Core GDB cannot deal with us deleting the current thread. */
+ if (!ptid_equal (lp->ptid, inferior_ptid))
+ delete_thread (lp->ptid);
+ else
+ record_dead_thread (lp->ptid);
+ printf_unfiltered (_("[%s exited]\n"),
+ target_pid_to_str (lp->ptid));
+ }
else
- error ("Your system does not support exec catchpoints.");
+ {
+ /* Even if LP->PTID is not in the global GDB thread list, the
+ LWP may be - with an additional thread ID. We don't need
+ to print anything in this case; thread_db is in use and
+ already took care of that. But it didn't delete the thread
+ in order to handle zombies correctly. */
+
+ struct thread_info *thr;
+
+ thr = iterate_over_threads (find_thread_from_lwp, &lp->ptid);
+ if (thr)
+ {
+ if (!ptid_equal (thr->ptid, inferior_ptid))
+ delete_thread (thr->ptid);
+ else
+ record_dead_thread (thr->ptid);
+ }
+ }
+
+ delete_lwp (lp->ptid);
}
+/* Attach to the LWP specified by PID. If VERBOSE is non-zero, print
+ a message telling the user that a new LWP has been added to the
+ process. Return 0 if successful or -1 if the new LWP could not
+ be attached. */
+
+int
+lin_lwp_attach_lwp (ptid_t ptid, int verbose)
+{
+ struct lwp_info *lp;
+
+ gdb_assert (is_lwp (ptid));
+
+ /* Make sure SIGCHLD is blocked. We don't want SIGCHLD events
+ to interrupt either the ptrace() or waitpid() calls below. */
+ if (!sigismember (&blocked_mask, SIGCHLD))
+ {
+ sigaddset (&blocked_mask, SIGCHLD);
+ sigprocmask (SIG_BLOCK, &blocked_mask, NULL);
+ }
+
+ lp = find_lwp_pid (ptid);
+
+ /* We assume that we're already attached to any LWP that has an id
+ equal to the overall process id, and to any LWP that is already
+ in our list of LWPs. If we're not seeing exit events from threads
+ and we've had PID wraparound since we last tried to stop all threads,
+ this assumption might be wrong; fortunately, this is very unlikely
+ to happen. */
+ if (GET_LWP (ptid) != GET_PID (ptid) && lp == NULL)
+ {
+ pid_t pid;
+ int status;
+
+ if (ptrace (PTRACE_ATTACH, GET_LWP (ptid), 0, 0) < 0)
+ {
+ /* If we fail to attach to the thread, issue a warning,
+ but continue. One way this can happen is if thread
+ creation is interrupted; as of Linux 2.6.19, a kernel
+ bug may place threads in the thread list and then fail
+ to create them. */
+ warning (_("Can't attach %s: %s"), target_pid_to_str (ptid),
+ safe_strerror (errno));
+ return -1;
+ }
+
+ if (lp == NULL)
+ lp = add_lwp (ptid);
+
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLAL: PTRACE_ATTACH %s, 0, 0 (OK)\n",
+ target_pid_to_str (ptid));
+
+ pid = my_waitpid (GET_LWP (ptid), &status, 0);
+ if (pid == -1 && errno == ECHILD)
+ {
+ /* Try again with __WCLONE to check cloned processes. */
+ pid = my_waitpid (GET_LWP (ptid), &status, __WCLONE);
+ lp->cloned = 1;
+ }
+
+ gdb_assert (pid == GET_LWP (ptid)
+ && WIFSTOPPED (status) && WSTOPSIG (status));
+
+ target_post_attach (pid);
+
+ lp->stopped = 1;
+
+ if (debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "LLAL: waitpid %s received %s\n",
+ target_pid_to_str (ptid),
+ status_to_str (status));
+ }
+ }
+ else
+ {
+ /* We assume that the LWP representing the original process is
+ already stopped. Mark it as stopped in the data structure
+ that the GNU/linux ptrace layer uses to keep track of
+ threads. Note that this won't have already been done since
+ the main thread will have, we assume, been stopped by an
+ attach from a different layer. */
+ if (lp == NULL)
+ lp = add_lwp (ptid);
+ lp->stopped = 1;
+ }
+
+ if (verbose)
+ printf_filtered (_("[New %s]\n"), target_pid_to_str (ptid));
+
+ return 0;
+}
+
+static void
+linux_nat_attach (char *args, int from_tty)
+{
+ struct lwp_info *lp;
+ pid_t pid;
+ int status;
+
+ /* FIXME: We should probably accept a list of process id's, and
+ attach all of them. */
+ linux_ops->to_attach (args, from_tty);
+
+ /* Add the initial process as the first LWP to the list. */
+ inferior_ptid = BUILD_LWP (GET_PID (inferior_ptid), GET_PID (inferior_ptid));
+ lp = add_lwp (inferior_ptid);
+
+ /* Make sure the initial process is stopped. The user-level threads
+ layer might want to poke around in the inferior, and that won't
+ work if things haven't stabilized yet. */
+ pid = my_waitpid (GET_PID (inferior_ptid), &status, 0);
+ if (pid == -1 && errno == ECHILD)
+ {
+ warning (_("%s is a cloned process"), target_pid_to_str (inferior_ptid));
+
+ /* Try again with __WCLONE to check cloned processes. */
+ pid = my_waitpid (GET_PID (inferior_ptid), &status, __WCLONE);
+ lp->cloned = 1;
+ }
+
+ gdb_assert (pid == GET_PID (inferior_ptid)
+ && WIFSTOPPED (status) && WSTOPSIG (status) == SIGSTOP);
+
+ lp->stopped = 1;
+
+ /* Fake the SIGSTOP that core GDB expects. */
+ lp->status = W_STOPCODE (SIGSTOP);
+ lp->resumed = 1;
+ if (debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "LLA: waitpid %ld, faking SIGSTOP\n", (long) pid);
+ }
+}
+
+static int
+detach_callback (struct lwp_info *lp, void *data)
+{
+ gdb_assert (lp->status == 0 || WIFSTOPPED (lp->status));
+
+ if (debug_linux_nat && lp->status)
+ fprintf_unfiltered (gdb_stdlog, "DC: Pending %s for %s on detach.\n",
+ strsignal (WSTOPSIG (lp->status)),
+ target_pid_to_str (lp->ptid));
+
+ while (lp->signalled && lp->stopped)
+ {
+ errno = 0;
+ if (ptrace (PTRACE_CONT, GET_LWP (lp->ptid), 0,
+ WSTOPSIG (lp->status)) < 0)
+ error (_("Can't continue %s: %s"), target_pid_to_str (lp->ptid),
+ safe_strerror (errno));
+
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "DC: PTRACE_CONTINUE (%s, 0, %s) (OK)\n",
+ target_pid_to_str (lp->ptid),
+ status_to_str (lp->status));
+
+ lp->stopped = 0;
+ lp->signalled = 0;
+ lp->status = 0;
+ /* FIXME drow/2003-08-26: There was a call to stop_wait_callback
+ here. But since lp->signalled was cleared above,
+ stop_wait_callback didn't do anything; the process was left
+ running. Shouldn't we be waiting for it to stop?
+ I've removed the call, since stop_wait_callback now does do
+ something when called with lp->signalled == 0. */
+
+ gdb_assert (lp->status == 0 || WIFSTOPPED (lp->status));
+ }
+
+ /* We don't actually detach from the LWP that has an id equal to the
+ overall process id just yet. */
+ if (GET_LWP (lp->ptid) != GET_PID (lp->ptid))
+ {
+ errno = 0;
+ if (ptrace (PTRACE_DETACH, GET_LWP (lp->ptid), 0,
+ WSTOPSIG (lp->status)) < 0)
+ error (_("Can't detach %s: %s"), target_pid_to_str (lp->ptid),
+ safe_strerror (errno));
+
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "PTRACE_DETACH (%s, %s, 0) (OK)\n",
+ target_pid_to_str (lp->ptid),
+ strsignal (WSTOPSIG (lp->status)));
+
+ delete_lwp (lp->ptid);
+ }
+
+ return 0;
+}
+
+static void
+linux_nat_detach (char *args, int from_tty)
+{
+ iterate_over_lwps (detach_callback, NULL);
+
+ /* Only the initial process should be left right now. */
+ gdb_assert (num_lwps == 1);
+
+ trap_ptid = null_ptid;
+
+ /* Destroy LWP info; it's no longer valid. */
+ init_lwp_list ();
+
+ /* Restore the original signal mask. */
+ sigprocmask (SIG_SETMASK, &normal_mask, NULL);
+ sigemptyset (&blocked_mask);
+
+ inferior_ptid = pid_to_ptid (GET_PID (inferior_ptid));
+ linux_ops->to_detach (args, from_tty);
+}
+
+/* Resume LP. */
+
+static int
+resume_callback (struct lwp_info *lp, void *data)
+{
+ if (lp->stopped && lp->status == 0)
+ {
+ struct thread_info *tp;
+
+ linux_ops->to_resume (pid_to_ptid (GET_LWP (lp->ptid)),
+ 0, TARGET_SIGNAL_0);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "RC: PTRACE_CONT %s, 0, 0 (resume sibling)\n",
+ target_pid_to_str (lp->ptid));
+ lp->stopped = 0;
+ lp->step = 0;
+ }
+
+ return 0;
+}
+
+static int
+resume_clear_callback (struct lwp_info *lp, void *data)
+{
+ lp->resumed = 0;
+ return 0;
+}
+
+static int
+resume_set_callback (struct lwp_info *lp, void *data)
+{
+ lp->resumed = 1;
+ return 0;
+}
+
+static void
+linux_nat_resume (ptid_t ptid, int step, enum target_signal signo)
+{
+ struct lwp_info *lp;
+ int resume_all;
+
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLR: Preparing to %s %s, %s, inferior_ptid %s\n",
+ step ? "step" : "resume",
+ target_pid_to_str (ptid),
+ signo ? strsignal (signo) : "0",
+ target_pid_to_str (inferior_ptid));
+
+ prune_lwps ();
+
+ /* A specific PTID means `step only this process id'. */
+ resume_all = (PIDGET (ptid) == -1);
+
+ if (resume_all)
+ iterate_over_lwps (resume_set_callback, NULL);
+ else
+ iterate_over_lwps (resume_clear_callback, NULL);
+
+ /* If PID is -1, it's the current inferior that should be
+ handled specially. */
+ if (PIDGET (ptid) == -1)
+ ptid = inferior_ptid;
+
+ lp = find_lwp_pid (ptid);
+ if (lp)
+ {
+ ptid = pid_to_ptid (GET_LWP (lp->ptid));
+
+ /* Remember if we're stepping. */
+ lp->step = step;
+
+ /* Mark this LWP as resumed. */
+ lp->resumed = 1;
+
+ /* If we have a pending wait status for this thread, there is no
+ point in resuming the process. But first make sure that
+ linux_nat_wait won't preemptively handle the event - we
+ should never take this short-circuit if we are going to
+ leave LP running, since we have skipped resuming all the
+ other threads. This bit of code needs to be synchronized
+ with linux_nat_wait. */
+
+ if (lp->status && WIFSTOPPED (lp->status))
+ {
+ int saved_signo = target_signal_from_host (WSTOPSIG (lp->status));
+
+ if (signal_stop_state (saved_signo) == 0
+ && signal_print_state (saved_signo) == 0
+ && signal_pass_state (saved_signo) == 1)
+ {
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLR: Not short circuiting for ignored "
+ "status 0x%x\n", lp->status);
+
+ /* FIXME: What should we do if we are supposed to continue
+ this thread with a signal? */
+ gdb_assert (signo == TARGET_SIGNAL_0);
+ signo = saved_signo;
+ lp->status = 0;
+ }
+ }
+
+ if (lp->status)
+ {
+ /* FIXME: What should we do if we are supposed to continue
+ this thread with a signal? */
+ gdb_assert (signo == TARGET_SIGNAL_0);
+
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLR: Short circuiting for status 0x%x\n",
+ lp->status);
+
+ return;
+ }
+
+ /* Mark LWP as not stopped to prevent it from being continued by
+ resume_callback. */
+ lp->stopped = 0;
+ }
+
+ if (resume_all)
+ iterate_over_lwps (resume_callback, NULL);
+
+ linux_ops->to_resume (ptid, step, signo);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLR: %s %s, %s (resume event thread)\n",
+ step ? "PTRACE_SINGLESTEP" : "PTRACE_CONT",
+ target_pid_to_str (ptid),
+ signo ? strsignal (signo) : "0");
+}
+
+/* Issue kill to specified lwp. */
+
+static int tkill_failed;
+
+static int
+kill_lwp (int lwpid, int signo)
+{
+ errno = 0;
+
+/* Use tkill, if possible, in case we are using nptl threads. If tkill
+ fails, then we are not using nptl threads and we should be using kill. */
+
+#ifdef HAVE_TKILL_SYSCALL
+ if (!tkill_failed)
+ {
+ int ret = syscall (__NR_tkill, lwpid, signo);
+ if (errno != ENOSYS)
+ return ret;
+ errno = 0;
+ tkill_failed = 1;
+ }
+#endif
+
+ return kill (lwpid, signo);
+}
+
+/* Handle a GNU/Linux extended wait response. Most of the work we
+ just pass off to linux_handle_extended_wait, but if it reports a
+ clone event we need to add the new LWP to our list (and not report
+ the trap to higher layers). This function returns non-zero if
+ the event should be ignored and we should wait again. If STOPPING
+ is true, the new LWP remains stopped, otherwise it is continued. */
+
+static int
+linux_nat_handle_extended (struct lwp_info *lp, int status, int stopping)
+{
+ linux_handle_extended_wait (GET_LWP (lp->ptid), status,
+ &lp->waitstatus);
+
+ /* TARGET_WAITKIND_SPURIOUS is used to indicate clone events. */
+ if (lp->waitstatus.kind == TARGET_WAITKIND_SPURIOUS)
+ {
+ struct lwp_info *new_lp;
+ new_lp = add_lwp (BUILD_LWP (lp->waitstatus.value.related_pid,
+ GET_PID (inferior_ptid)));
+ new_lp->cloned = 1;
+
+ if (stopping)
+ new_lp->stopped = 1;
+ else
+ ptrace (PTRACE_CONT, lp->waitstatus.value.related_pid, 0, 0);
+
+ lp->waitstatus.kind = TARGET_WAITKIND_IGNORE;
+
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLHE: Got clone event from LWP %ld, resuming\n",
+ GET_LWP (lp->ptid));
+ ptrace (PTRACE_CONT, GET_LWP (lp->ptid), 0, 0);
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Wait for LP to stop. Returns the wait status, or 0 if the LWP has
+ exited. */
+
+static int
+wait_lwp (struct lwp_info *lp)
+{
+ pid_t pid;
+ int status;
+ int thread_dead = 0;
+
+ gdb_assert (!lp->stopped);
+ gdb_assert (lp->status == 0);
+
+ pid = my_waitpid (GET_LWP (lp->ptid), &status, 0);
+ if (pid == -1 && errno == ECHILD)
+ {
+ pid = my_waitpid (GET_LWP (lp->ptid), &status, __WCLONE);
+ if (pid == -1 && errno == ECHILD)
+ {
+ /* The thread has previously exited. We need to delete it
+ now because, for some vendor 2.4 kernels with NPTL
+ support backported, there won't be an exit event unless
+ it is the main thread. 2.6 kernels will report an exit
+ event for each thread that exits, as expected. */
+ thread_dead = 1;
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog, "WL: %s vanished.\n",
+ target_pid_to_str (lp->ptid));
+ }
+ }
+
+ if (!thread_dead)
+ {
+ gdb_assert (pid == GET_LWP (lp->ptid));
+
+ if (debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "WL: waitpid %s received %s\n",
+ target_pid_to_str (lp->ptid),
+ status_to_str (status));
+ }
+ }
+
+ /* Check if the thread has exited. */
+ if (WIFEXITED (status) || WIFSIGNALED (status))
+ {
+ thread_dead = 1;
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog, "WL: %s exited.\n",
+ target_pid_to_str (lp->ptid));
+ }
+
+ if (thread_dead)
+ {
+ exit_lwp (lp);
+ return 0;
+ }
+
+ gdb_assert (WIFSTOPPED (status));
+
+ /* Handle GNU/Linux's extended waitstatus for trace events. */
+ if (WIFSTOPPED (status) && WSTOPSIG (status) == SIGTRAP && status >> 16 != 0)
+ {
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "WL: Handling extended status 0x%06x\n",
+ status);
+ if (linux_nat_handle_extended (lp, status, 1))
+ return wait_lwp (lp);
+ }
+
+ return status;
+}
+
+/* Send a SIGSTOP to LP. */
+
+static int
+stop_callback (struct lwp_info *lp, void *data)
+{
+ if (!lp->stopped && !lp->signalled)
+ {
+ int ret;
+
+ if (debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "SC: kill %s **<SIGSTOP>**\n",
+ target_pid_to_str (lp->ptid));
+ }
+ errno = 0;
+ ret = kill_lwp (GET_LWP (lp->ptid), SIGSTOP);
+ if (debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "SC: lwp kill %d %s\n",
+ ret,
+ errno ? safe_strerror (errno) : "ERRNO-OK");
+ }
+
+ lp->signalled = 1;
+ gdb_assert (lp->status == 0);
+ }
+
+ return 0;
+}
+
+/* Wait until LP is stopped. If DATA is non-null it is interpreted as
+ a pointer to a set of signals to be flushed immediately. */
+
+static int
+stop_wait_callback (struct lwp_info *lp, void *data)
+{
+ sigset_t *flush_mask = data;
+
+ if (!lp->stopped)
+ {
+ int status;
+
+ status = wait_lwp (lp);
+ if (status == 0)
+ return 0;
+
+ /* Ignore any signals in FLUSH_MASK. */
+ if (flush_mask && sigismember (flush_mask, WSTOPSIG (status)))
+ {
+ if (!lp->signalled)
+ {
+ lp->stopped = 1;
+ return 0;
+ }
+
+ errno = 0;
+ ptrace (PTRACE_CONT, GET_LWP (lp->ptid), 0, 0);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "PTRACE_CONT %s, 0, 0 (%s)\n",
+ target_pid_to_str (lp->ptid),
+ errno ? safe_strerror (errno) : "OK");
+
+ return stop_wait_callback (lp, flush_mask);
+ }
+
+ if (WSTOPSIG (status) != SIGSTOP)
+ {
+ if (WSTOPSIG (status) == SIGTRAP)
+ {
+ /* If a LWP other than the LWP that we're reporting an
+ event for has hit a GDB breakpoint (as opposed to
+ some random trap signal), then just arrange for it to
+ hit it again later. We don't keep the SIGTRAP status
+ and don't forward the SIGTRAP signal to the LWP. We
+ will handle the current event, eventually we will
+ resume all LWPs, and this one will get its breakpoint
+ trap again.
+
+ If we do not do this, then we run the risk that the
+ user will delete or disable the breakpoint, but the
+ thread will have already tripped on it. */
+
+ /* Now resume this LWP and get the SIGSTOP event. */
+ errno = 0;
+ ptrace (PTRACE_CONT, GET_LWP (lp->ptid), 0, 0);
+ if (debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "PTRACE_CONT %s, 0, 0 (%s)\n",
+ target_pid_to_str (lp->ptid),
+ errno ? safe_strerror (errno) : "OK");
+
+ fprintf_unfiltered (gdb_stdlog,
+ "SWC: Candidate SIGTRAP event in %s\n",
+ target_pid_to_str (lp->ptid));
+ }
+ /* Hold the SIGTRAP for handling by linux_nat_wait. */
+ stop_wait_callback (lp, data);
+ /* If there's another event, throw it back into the queue. */
+ if (lp->status)
+ {
+ if (debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "SWC: kill %s, %s\n",
+ target_pid_to_str (lp->ptid),
+ status_to_str ((int) status));
+ }
+ kill_lwp (GET_LWP (lp->ptid), WSTOPSIG (lp->status));
+ }
+ /* Save the sigtrap event. */
+ lp->status = status;
+ return 0;
+ }
+ else
+ {
+ /* The thread was stopped with a signal other than
+ SIGSTOP, and didn't accidentally trip a breakpoint. */
+
+ if (debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "SWC: Pending event %s in %s\n",
+ status_to_str ((int) status),
+ target_pid_to_str (lp->ptid));
+ }
+ /* Now resume this LWP and get the SIGSTOP event. */
+ errno = 0;
+ ptrace (PTRACE_CONT, GET_LWP (lp->ptid), 0, 0);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "SWC: PTRACE_CONT %s, 0, 0 (%s)\n",
+ target_pid_to_str (lp->ptid),
+ errno ? safe_strerror (errno) : "OK");
+
+ /* Hold this event/waitstatus while we check to see if
+ there are any more (we still want to get that SIGSTOP). */
+ stop_wait_callback (lp, data);
+ /* If the lp->status field is still empty, use it to hold
+ this event. If not, then this event must be returned
+ to the event queue of the LWP. */
+ if (lp->status == 0)
+ lp->status = status;
+ else
+ {
+ if (debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "SWC: kill %s, %s\n",
+ target_pid_to_str (lp->ptid),
+ status_to_str ((int) status));
+ }
+ kill_lwp (GET_LWP (lp->ptid), WSTOPSIG (status));
+ }
+ return 0;
+ }
+ }
+ else
+ {
+ /* We caught the SIGSTOP that we intended to catch, so
+ there's no SIGSTOP pending. */
+ lp->stopped = 1;
+ lp->signalled = 0;
+ }
+ }
+
+ return 0;
+}
+
+/* Check whether PID has any pending signals in FLUSH_MASK. If so set
+ the appropriate bits in PENDING, and return 1 - otherwise return 0. */
+
+static int
+linux_nat_has_pending (int pid, sigset_t *pending, sigset_t *flush_mask)
+{
+ sigset_t blocked, ignored;
+ int i;
+
+ linux_proc_pending_signals (pid, pending, &blocked, &ignored);
+
+ if (!flush_mask)
+ return 0;
+
+ for (i = 1; i < NSIG; i++)
+ if (sigismember (pending, i))
+ if (!sigismember (flush_mask, i)
+ || sigismember (&blocked, i)
+ || sigismember (&ignored, i))
+ sigdelset (pending, i);
+
+ if (sigisemptyset (pending))
+ return 0;
+
+ return 1;
+}
+
+/* DATA is interpreted as a mask of signals to flush. If LP has
+ signals pending, and they are all in the flush mask, then arrange
+ to flush them. LP should be stopped, as should all other threads
+ it might share a signal queue with. */
+
+static int
+flush_callback (struct lwp_info *lp, void *data)
+{
+ sigset_t *flush_mask = data;
+ sigset_t pending, intersection, blocked, ignored;
+ int pid, status;
+
+ /* Normally, when an LWP exits, it is removed from the LWP list. The
+ last LWP isn't removed till later, however. So if there is only
+ one LWP on the list, make sure it's alive. */
+ if (lwp_list == lp && lp->next == NULL)
+ if (!linux_nat_thread_alive (lp->ptid))
+ return 0;
+
+ /* Just because the LWP is stopped doesn't mean that new signals
+ can't arrive from outside, so this function must be careful of
+ race conditions. However, because all threads are stopped, we
+ can assume that the pending mask will not shrink unless we resume
+ the LWP, and that it will then get another signal. We can't
+ control which one, however. */
+
+ if (lp->status)
+ {
+ if (debug_linux_nat)
+ printf_unfiltered (_("FC: LP has pending status %06x\n"), lp->status);
+ if (WIFSTOPPED (lp->status) && sigismember (flush_mask, WSTOPSIG (lp->status)))
+ lp->status = 0;
+ }
+
+ while (linux_nat_has_pending (GET_LWP (lp->ptid), &pending, flush_mask))
+ {
+ int ret;
+
+ errno = 0;
+ ret = ptrace (PTRACE_CONT, GET_LWP (lp->ptid), 0, 0);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stderr,
+ "FC: Sent PTRACE_CONT, ret %d %d\n", ret, errno);
+
+ lp->stopped = 0;
+ stop_wait_callback (lp, flush_mask);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stderr,
+ "FC: Wait finished; saved status is %d\n",
+ lp->status);
+ }
+
+ return 0;
+}
+
+/* Return non-zero if LP has a wait status pending. */
+
+static int
+status_callback (struct lwp_info *lp, void *data)
+{
+ /* Only report a pending wait status if we pretend that this has
+ indeed been resumed. */
+ return (lp->status != 0 && lp->resumed);
+}
+
+/* Return non-zero if LP isn't stopped. */
+
+static int
+running_callback (struct lwp_info *lp, void *data)
+{
+ return (lp->stopped == 0 || (lp->status != 0 && lp->resumed));
+}
+
+/* Count the LWP's that have had events. */
+
+static int
+count_events_callback (struct lwp_info *lp, void *data)
+{
+ int *count = data;
+
+ gdb_assert (count != NULL);
+
+ /* Count only LWPs that have a SIGTRAP event pending. */
+ if (lp->status != 0
+ && WIFSTOPPED (lp->status) && WSTOPSIG (lp->status) == SIGTRAP)
+ (*count)++;
+
+ return 0;
+}
+
+/* Select the LWP (if any) that is currently being single-stepped. */
+
+static int
+select_singlestep_lwp_callback (struct lwp_info *lp, void *data)
+{
+ if (lp->step && lp->status != 0)
+ return 1;
+ else
+ return 0;
+}
+
+/* Select the Nth LWP that has had a SIGTRAP event. */
+
+static int
+select_event_lwp_callback (struct lwp_info *lp, void *data)
+{
+ int *selector = data;
+
+ gdb_assert (selector != NULL);
+
+ /* Select only LWPs that have a SIGTRAP event pending. */
+ if (lp->status != 0
+ && WIFSTOPPED (lp->status) && WSTOPSIG (lp->status) == SIGTRAP)
+ if ((*selector)-- == 0)
+ return 1;
+
+ return 0;
+}
+
+static int
+cancel_breakpoints_callback (struct lwp_info *lp, void *data)
+{
+ struct lwp_info *event_lp = data;
+
+ /* Leave the LWP that has been elected to receive a SIGTRAP alone. */
+ if (lp == event_lp)
+ return 0;
+
+ /* If a LWP other than the LWP that we're reporting an event for has
+ hit a GDB breakpoint (as opposed to some random trap signal),
+ then just arrange for it to hit it again later. We don't keep
+ the SIGTRAP status and don't forward the SIGTRAP signal to the
+ LWP. We will handle the current event, eventually we will resume
+ all LWPs, and this one will get its breakpoint trap again.
+
+ If we do not do this, then we run the risk that the user will
+ delete or disable the breakpoint, but the LWP will have already
+ tripped on it. */
+
+ if (lp->status != 0
+ && WIFSTOPPED (lp->status) && WSTOPSIG (lp->status) == SIGTRAP
+ && breakpoint_inserted_here_p (read_pc_pid (lp->ptid) -
+ DECR_PC_AFTER_BREAK))
+ {
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "CBC: Push back breakpoint for %s\n",
+ target_pid_to_str (lp->ptid));
+
+ /* Back up the PC if necessary. */
+ if (DECR_PC_AFTER_BREAK)
+ write_pc_pid (read_pc_pid (lp->ptid) - DECR_PC_AFTER_BREAK, lp->ptid);
+
+ /* Throw away the SIGTRAP. */
+ lp->status = 0;
+ }
+
+ return 0;
+}
+
+/* Select one LWP out of those that have events pending. */
+
+static void
+select_event_lwp (struct lwp_info **orig_lp, int *status)
+{
+ int num_events = 0;
+ int random_selector;
+ struct lwp_info *event_lp;
+
+ /* Record the wait status for the original LWP. */
+ (*orig_lp)->status = *status;
+
+ /* Give preference to any LWP that is being single-stepped. */
+ event_lp = iterate_over_lwps (select_singlestep_lwp_callback, NULL);
+ if (event_lp != NULL)
+ {
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "SEL: Select single-step %s\n",
+ target_pid_to_str (event_lp->ptid));
+ }
+ else
+ {
+ /* No single-stepping LWP. Select one at random, out of those
+ which have had SIGTRAP events. */
+
+ /* First see how many SIGTRAP events we have. */
+ iterate_over_lwps (count_events_callback, &num_events);
+
+ /* Now randomly pick a LWP out of those that have had a SIGTRAP. */
+ random_selector = (int)
+ ((num_events * (double) rand ()) / (RAND_MAX + 1.0));
+
+ if (debug_linux_nat && num_events > 1)
+ fprintf_unfiltered (gdb_stdlog,
+ "SEL: Found %d SIGTRAP events, selecting #%d\n",
+ num_events, random_selector);
+
+ event_lp = iterate_over_lwps (select_event_lwp_callback,
+ &random_selector);
+ }
+
+ if (event_lp != NULL)
+ {
+ /* Switch the event LWP. */
+ *orig_lp = event_lp;
+ *status = event_lp->status;
+ }
+
+ /* Flush the wait status for the event LWP. */
+ (*orig_lp)->status = 0;
+}
+
+/* Return non-zero if LP has been resumed. */
+
+static int
+resumed_callback (struct lwp_info *lp, void *data)
+{
+ return lp->resumed;
+}
+
+/* Stop an active thread, verify it still exists, then resume it. */
+
+static int
+stop_and_resume_callback (struct lwp_info *lp, void *data)
+{
+ struct lwp_info *ptr;
+
+ if (!lp->stopped && !lp->signalled)
+ {
+ stop_callback (lp, NULL);
+ stop_wait_callback (lp, NULL);
+ /* Resume if the lwp still exists. */
+ for (ptr = lwp_list; ptr; ptr = ptr->next)
+ if (lp == ptr)
+ {
+ resume_callback (lp, NULL);
+ resume_set_callback (lp, NULL);
+ }
+ }
+ return 0;
+}
+
+static ptid_t
+linux_nat_wait (ptid_t ptid, struct target_waitstatus *ourstatus)
+{
+ struct lwp_info *lp = NULL;
+ int options = 0;
+ int status = 0;
+ pid_t pid = PIDGET (ptid);
+ sigset_t flush_mask;
+
+ /* The first time we get here after starting a new inferior, we may
+ not have added it to the LWP list yet - this is the earliest
+ moment at which we know its PID. */
+ if (num_lwps == 0)
+ {
+ gdb_assert (!is_lwp (inferior_ptid));
+
+ inferior_ptid = BUILD_LWP (GET_PID (inferior_ptid),
+ GET_PID (inferior_ptid));
+ lp = add_lwp (inferior_ptid);
+ lp->resumed = 1;
+ }
+
+ sigemptyset (&flush_mask);
+
+ /* Make sure SIGCHLD is blocked. */
+ if (!sigismember (&blocked_mask, SIGCHLD))
+ {
+ sigaddset (&blocked_mask, SIGCHLD);
+ sigprocmask (SIG_BLOCK, &blocked_mask, NULL);
+ }
+
+retry:
+
+ /* Make sure there is at least one LWP that has been resumed. */
+ gdb_assert (iterate_over_lwps (resumed_callback, NULL));
+
+ /* First check if there is a LWP with a wait status pending. */
+ if (pid == -1)
+ {
+ /* Any LWP that's been resumed will do. */
+ lp = iterate_over_lwps (status_callback, NULL);
+ if (lp)
+ {
+ status = lp->status;
+ lp->status = 0;
+
+ if (debug_linux_nat && status)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: Using pending wait status %s for %s.\n",
+ status_to_str (status),
+ target_pid_to_str (lp->ptid));
+ }
+
+ /* But if we don't fine one, we'll have to wait, and check both
+ cloned and uncloned processes. We start with the cloned
+ processes. */
+ options = __WCLONE | WNOHANG;
+ }
+ else if (is_lwp (ptid))
+ {
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: Waiting for specific LWP %s.\n",
+ target_pid_to_str (ptid));
+
+ /* We have a specific LWP to check. */
+ lp = find_lwp_pid (ptid);
+ gdb_assert (lp);
+ status = lp->status;
+ lp->status = 0;
+
+ if (debug_linux_nat && status)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: Using pending wait status %s for %s.\n",
+ status_to_str (status),
+ target_pid_to_str (lp->ptid));
+
+ /* If we have to wait, take into account whether PID is a cloned
+ process or not. And we have to convert it to something that
+ the layer beneath us can understand. */
+ options = lp->cloned ? __WCLONE : 0;
+ pid = GET_LWP (ptid);
+ }
+
+ if (status && lp->signalled)
+ {
+ /* A pending SIGSTOP may interfere with the normal stream of
+ events. In a typical case where interference is a problem,
+ we have a SIGSTOP signal pending for LWP A while
+ single-stepping it, encounter an event in LWP B, and take the
+ pending SIGSTOP while trying to stop LWP A. After processing
+ the event in LWP B, LWP A is continued, and we'll never see
+ the SIGTRAP associated with the last time we were
+ single-stepping LWP A. */
+
+ /* Resume the thread. It should halt immediately returning the
+ pending SIGSTOP. */
+ registers_changed ();
+ linux_ops->to_resume (pid_to_ptid (GET_LWP (lp->ptid)),
+ lp->step, TARGET_SIGNAL_0);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: %s %s, 0, 0 (expect SIGSTOP)\n",
+ lp->step ? "PTRACE_SINGLESTEP" : "PTRACE_CONT",
+ target_pid_to_str (lp->ptid));
+ lp->stopped = 0;
+ gdb_assert (lp->resumed);
+
+ /* This should catch the pending SIGSTOP. */
+ stop_wait_callback (lp, NULL);
+ }
+
+ set_sigint_trap (); /* Causes SIGINT to be passed on to the
+ attached process. */
+ set_sigio_trap ();
+
+ while (status == 0)
+ {
+ pid_t lwpid;
+
+ lwpid = my_waitpid (pid, &status, options);
+ if (lwpid > 0)
+ {
+ gdb_assert (pid == -1 || lwpid == pid);
+
+ if (debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: waitpid %ld received %s\n",
+ (long) lwpid, status_to_str (status));
+ }
+
+ lp = find_lwp_pid (pid_to_ptid (lwpid));
+
+ /* Check for stop events reported by a process we didn't
+ already know about - anything not already in our LWP
+ list.
+
+ If we're expecting to receive stopped processes after
+ fork, vfork, and clone events, then we'll just add the
+ new one to our list and go back to waiting for the event
+ to be reported - the stopped process might be returned
+ from waitpid before or after the event is. */
+ if (WIFSTOPPED (status) && !lp)
+ {
+ linux_record_stopped_pid (lwpid);
+ status = 0;
+ continue;
+ }
+
+ /* Make sure we don't report an event for the exit of an LWP not in
+ our list, i.e. not part of the current process. This can happen
+ if we detach from a program we original forked and then it
+ exits. */
+ if (!WIFSTOPPED (status) && !lp)
+ {
+ status = 0;
+ continue;
+ }
+
+ /* NOTE drow/2003-06-17: This code seems to be meant for debugging
+ CLONE_PTRACE processes which do not use the thread library -
+ otherwise we wouldn't find the new LWP this way. That doesn't
+ currently work, and the following code is currently unreachable
+ due to the two blocks above. If it's fixed some day, this code
+ should be broken out into a function so that we can also pick up
+ LWPs from the new interface. */
+ if (!lp)
+ {
+ lp = add_lwp (BUILD_LWP (lwpid, GET_PID (inferior_ptid)));
+ if (options & __WCLONE)
+ lp->cloned = 1;
+
+ gdb_assert (WIFSTOPPED (status)
+ && WSTOPSIG (status) == SIGSTOP);
+ lp->signalled = 1;
+
+ if (!in_thread_list (inferior_ptid))
+ {
+ inferior_ptid = BUILD_LWP (GET_PID (inferior_ptid),
+ GET_PID (inferior_ptid));
+ add_thread (inferior_ptid);
+ }
+
+ add_thread (lp->ptid);
+ printf_unfiltered (_("[New %s]\n"),
+ target_pid_to_str (lp->ptid));
+ }
+
+ /* Handle GNU/Linux's extended waitstatus for trace events. */
+ if (WIFSTOPPED (status) && WSTOPSIG (status) == SIGTRAP && status >> 16 != 0)
+ {
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: Handling extended status 0x%06x\n",
+ status);
+ if (linux_nat_handle_extended (lp, status, 0))
+ {
+ status = 0;
+ continue;
+ }
+ }
+
+ /* Check if the thread has exited. */
+ if ((WIFEXITED (status) || WIFSIGNALED (status)) && num_lwps > 1)
+ {
+ /* If this is the main thread, we must stop all threads and
+ verify if they are still alive. This is because in the nptl
+ thread model, there is no signal issued for exiting LWPs
+ other than the main thread. We only get the main thread
+ exit signal once all child threads have already exited.
+ If we stop all the threads and use the stop_wait_callback
+ to check if they have exited we can determine whether this
+ signal should be ignored or whether it means the end of the
+ debugged application, regardless of which threading model
+ is being used. */
+ if (GET_PID (lp->ptid) == GET_LWP (lp->ptid))
+ {
+ lp->stopped = 1;
+ iterate_over_lwps (stop_and_resume_callback, NULL);
+ }
+
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: %s exited.\n",
+ target_pid_to_str (lp->ptid));
+
+ exit_lwp (lp);
+
+ /* If there is at least one more LWP, then the exit signal
+ was not the end of the debugged application and should be
+ ignored. */
+ if (num_lwps > 0)
+ {
+ /* Make sure there is at least one thread running. */
+ gdb_assert (iterate_over_lwps (running_callback, NULL));
+
+ /* Discard the event. */
+ status = 0;
+ continue;
+ }
+ }
+
+ /* Check if the current LWP has previously exited. In the nptl
+ thread model, LWPs other than the main thread do not issue
+ signals when they exit so we must check whenever the thread
+ has stopped. A similar check is made in stop_wait_callback(). */
+ if (num_lwps > 1 && !linux_nat_thread_alive (lp->ptid))
+ {
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: %s exited.\n",
+ target_pid_to_str (lp->ptid));
+
+ exit_lwp (lp);
+
+ /* Make sure there is at least one thread running. */
+ gdb_assert (iterate_over_lwps (running_callback, NULL));
+
+ /* Discard the event. */
+ status = 0;
+ continue;
+ }
+
+ /* Make sure we don't report a SIGSTOP that we sent
+ ourselves in an attempt to stop an LWP. */
+ if (lp->signalled
+ && WIFSTOPPED (status) && WSTOPSIG (status) == SIGSTOP)
+ {
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: Delayed SIGSTOP caught for %s.\n",
+ target_pid_to_str (lp->ptid));
+
+ /* This is a delayed SIGSTOP. */
+ lp->signalled = 0;
+
+ registers_changed ();
+ linux_ops->to_resume (pid_to_ptid (GET_LWP (lp->ptid)),
+ lp->step, TARGET_SIGNAL_0);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: %s %s, 0, 0 (discard SIGSTOP)\n",
+ lp->step ?
+ "PTRACE_SINGLESTEP" : "PTRACE_CONT",
+ target_pid_to_str (lp->ptid));
+
+ lp->stopped = 0;
+ gdb_assert (lp->resumed);
+
+ /* Discard the event. */
+ status = 0;
+ continue;
+ }
+
+ break;
+ }
+
+ if (pid == -1)
+ {
+ /* Alternate between checking cloned and uncloned processes. */
+ options ^= __WCLONE;
+
+ /* And suspend every time we have checked both. */
+ if (options & __WCLONE)
+ sigsuspend (&suspend_mask);
+ }
+
+ /* We shouldn't end up here unless we want to try again. */
+ gdb_assert (status == 0);
+ }
+
+ clear_sigio_trap ();
+ clear_sigint_trap ();
+
+ gdb_assert (lp);
+
+ /* Don't report signals that GDB isn't interested in, such as
+ signals that are neither printed nor stopped upon. Stopping all
+ threads can be a bit time-consuming so if we want decent
+ performance with heavily multi-threaded programs, especially when
+ they're using a high frequency timer, we'd better avoid it if we
+ can. */
+
+ if (WIFSTOPPED (status))
+ {
+ int signo = target_signal_from_host (WSTOPSIG (status));
+
+ /* If we get a signal while single-stepping, we may need special
+ care, e.g. to skip the signal handler. Defer to common code. */
+ if (!lp->step
+ && signal_stop_state (signo) == 0
+ && signal_print_state (signo) == 0
+ && signal_pass_state (signo) == 1)
+ {
+ /* FIMXE: kettenis/2001-06-06: Should we resume all threads
+ here? It is not clear we should. GDB may not expect
+ other threads to run. On the other hand, not resuming
+ newly attached threads may cause an unwanted delay in
+ getting them running. */
+ registers_changed ();
+ linux_ops->to_resume (pid_to_ptid (GET_LWP (lp->ptid)),
+ lp->step, signo);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: %s %s, %s (preempt 'handle')\n",
+ lp->step ?
+ "PTRACE_SINGLESTEP" : "PTRACE_CONT",
+ target_pid_to_str (lp->ptid),
+ signo ? strsignal (signo) : "0");
+ lp->stopped = 0;
+ status = 0;
+ goto retry;
+ }
+
+ if (signo == TARGET_SIGNAL_INT && signal_pass_state (signo) == 0)
+ {
+ /* If ^C/BREAK is typed at the tty/console, SIGINT gets
+ forwarded to the entire process group, that is, all LWP's
+ will receive it. Since we only want to report it once,
+ we try to flush it from all LWPs except this one. */
+ sigaddset (&flush_mask, SIGINT);
+ }
+ }
+
+ /* This LWP is stopped now. */
+ lp->stopped = 1;
+
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog, "LLW: Candidate event %s in %s.\n",
+ status_to_str (status), target_pid_to_str (lp->ptid));
+
+ /* Now stop all other LWP's ... */
+ iterate_over_lwps (stop_callback, NULL);
+
+ /* ... and wait until all of them have reported back that they're no
+ longer running. */
+ iterate_over_lwps (stop_wait_callback, &flush_mask);
+ iterate_over_lwps (flush_callback, &flush_mask);
+
+ /* If we're not waiting for a specific LWP, choose an event LWP from
+ among those that have had events. Giving equal priority to all
+ LWPs that have had events helps prevent starvation. */
+ if (pid == -1)
+ select_event_lwp (&lp, &status);
+
+ /* Now that we've selected our final event LWP, cancel any
+ breakpoints in other LWPs that have hit a GDB breakpoint. See
+ the comment in cancel_breakpoints_callback to find out why. */
+ iterate_over_lwps (cancel_breakpoints_callback, lp);
+
+ if (WIFSTOPPED (status) && WSTOPSIG (status) == SIGTRAP)
+ {
+ trap_ptid = lp->ptid;
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLW: trap_ptid is %s.\n",
+ target_pid_to_str (trap_ptid));
+ }
+ else
+ trap_ptid = null_ptid;
+
+ if (lp->waitstatus.kind != TARGET_WAITKIND_IGNORE)
+ {
+ *ourstatus = lp->waitstatus;
+ lp->waitstatus.kind = TARGET_WAITKIND_IGNORE;
+ }
+ else
+ store_waitstatus (ourstatus, status);
+
+ return lp->ptid;
+}
+
+static int
+kill_callback (struct lwp_info *lp, void *data)
+{
+ errno = 0;
+ ptrace (PTRACE_KILL, GET_LWP (lp->ptid), 0, 0);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "KC: PTRACE_KILL %s, 0, 0 (%s)\n",
+ target_pid_to_str (lp->ptid),
+ errno ? safe_strerror (errno) : "OK");
+
+ return 0;
+}
+
+static int
+kill_wait_callback (struct lwp_info *lp, void *data)
+{
+ pid_t pid;
+
+ /* We must make sure that there are no pending events (delayed
+ SIGSTOPs, pending SIGTRAPs, etc.) to make sure the current
+ program doesn't interfere with any following debugging session. */
+
+ /* For cloned processes we must check both with __WCLONE and
+ without, since the exit status of a cloned process isn't reported
+ with __WCLONE. */
+ if (lp->cloned)
+ {
+ do
+ {
+ pid = my_waitpid (GET_LWP (lp->ptid), NULL, __WCLONE);
+ if (pid != (pid_t) -1 && debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "KWC: wait %s received unknown.\n",
+ target_pid_to_str (lp->ptid));
+ }
+ }
+ while (pid == GET_LWP (lp->ptid));
+
+ gdb_assert (pid == -1 && errno == ECHILD);
+ }
+
+ do
+ {
+ pid = my_waitpid (GET_LWP (lp->ptid), NULL, 0);
+ if (pid != (pid_t) -1 && debug_linux_nat)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "KWC: wait %s received unk.\n",
+ target_pid_to_str (lp->ptid));
+ }
+ }
+ while (pid == GET_LWP (lp->ptid));
+
+ gdb_assert (pid == -1 && errno == ECHILD);
+ return 0;
+}
+
+static void
+linux_nat_kill (void)
+{
+ struct target_waitstatus last;
+ ptid_t last_ptid;
+ int status;
+
+ /* If we're stopped while forking and we haven't followed yet,
+ kill the other task. We need to do this first because the
+ parent will be sleeping if this is a vfork. */
+
+ get_last_target_status (&last_ptid, &last);
+
+ if (last.kind == TARGET_WAITKIND_FORKED
+ || last.kind == TARGET_WAITKIND_VFORKED)
+ {
+ ptrace (PT_KILL, last.value.related_pid, 0, 0);
+ wait (&status);
+ }
+
+ if (forks_exist_p ())
+ linux_fork_killall ();
+ else
+ {
+ /* Kill all LWP's ... */
+ iterate_over_lwps (kill_callback, NULL);
+
+ /* ... and wait until we've flushed all events. */
+ iterate_over_lwps (kill_wait_callback, NULL);
+ }
+
+ target_mourn_inferior ();
+}
+
+static void
+linux_nat_mourn_inferior (void)
+{
+ trap_ptid = null_ptid;
+
+ /* Destroy LWP info; it's no longer valid. */
+ init_lwp_list ();
+
+ /* Restore the original signal mask. */
+ sigprocmask (SIG_SETMASK, &normal_mask, NULL);
+ sigemptyset (&blocked_mask);
+
+ if (! forks_exist_p ())
+ /* Normal case, no other forks available. */
+ linux_ops->to_mourn_inferior ();
+ else
+ /* Multi-fork case. The current inferior_ptid has exited, but
+ there are other viable forks to debug. Delete the exiting
+ one and context-switch to the first available. */
+ linux_fork_mourn_inferior ();
+}
+
+static LONGEST
+linux_nat_xfer_partial (struct target_ops *ops, enum target_object object,
+ const char *annex, gdb_byte *readbuf,
+ const gdb_byte *writebuf,
+ ULONGEST offset, LONGEST len)
+{
+ struct cleanup *old_chain = save_inferior_ptid ();
+ LONGEST xfer;
+
+ if (is_lwp (inferior_ptid))
+ inferior_ptid = pid_to_ptid (GET_LWP (inferior_ptid));
+
+ xfer = linux_ops->to_xfer_partial (ops, object, annex, readbuf, writebuf,
+ offset, len);
+
+ do_cleanups (old_chain);
+ return xfer;
+}
+
+static int
+linux_nat_thread_alive (ptid_t ptid)
+{
+ gdb_assert (is_lwp (ptid));
+
+ errno = 0;
+ ptrace (PTRACE_PEEKUSER, GET_LWP (ptid), 0, 0);
+ if (debug_linux_nat)
+ fprintf_unfiltered (gdb_stdlog,
+ "LLTA: PTRACE_PEEKUSER %s, 0, 0 (%s)\n",
+ target_pid_to_str (ptid),
+ errno ? safe_strerror (errno) : "OK");
+
+ /* Not every Linux kernel implements PTRACE_PEEKUSER. But we can
+ handle that case gracefully since ptrace will first do a lookup
+ for the process based upon the passed-in pid. If that fails we
+ will get either -ESRCH or -EPERM, otherwise the child exists and
+ is alive. */
+ if (errno == ESRCH || errno == EPERM)
+ return 0;
+
+ return 1;
+}
+
+static char *
+linux_nat_pid_to_str (ptid_t ptid)
+{
+ static char buf[64];
+
+ if (lwp_list && lwp_list->next && is_lwp (ptid))
+ {
+ snprintf (buf, sizeof (buf), "LWP %ld", GET_LWP (ptid));
+ return buf;
+ }
+
+ return normal_pid_to_str (ptid);
+}
+
+static void
+sigchld_handler (int signo)
+{
+ /* Do nothing. The only reason for this handler is that it allows
+ us to use sigsuspend in linux_nat_wait above to wait for the
+ arrival of a SIGCHLD. */
+}
+
+/* Accepts an integer PID; Returns a string representing a file that
+ can be opened to get the symbols for the child process. */
+
+char *
+child_pid_to_exec_file (int pid)
+{
+ char *name1, *name2;
+
+ name1 = xmalloc (MAXPATHLEN);
+ name2 = xmalloc (MAXPATHLEN);
+ make_cleanup (xfree, name1);
+ make_cleanup (xfree, name2);
+ memset (name2, 0, MAXPATHLEN);
+
+ sprintf (name1, "/proc/%d/exe", pid);
+ if (readlink (name1, name2, MAXPATHLEN) > 0)
+ return name2;
+ else
+ return name1;
+}
+
+/* Service function for corefiles and info proc. */
+
+static int
+read_mapping (FILE *mapfile,
+ long long *addr,
+ long long *endaddr,
+ char *permissions,
+ long long *offset,
+ char *device, long long *inode, char *filename)
+{
+ int ret = fscanf (mapfile, "%llx-%llx %s %llx %s %llx",
+ addr, endaddr, permissions, offset, device, inode);
+
+ filename[0] = '\0';
+ if (ret > 0 && ret != EOF)
+ {
+ /* Eat everything up to EOL for the filename. This will prevent
+ weird filenames (such as one with embedded whitespace) from
+ confusing this code. It also makes this code more robust in
+ respect to annotations the kernel may add after the filename.
+
+ Note the filename is used for informational purposes
+ only. */
+ ret += fscanf (mapfile, "%[^\n]\n", filename);
+ }
+
+ return (ret != 0 && ret != EOF);
+}
+
+/* Fills the "to_find_memory_regions" target vector. Lists the memory
+ regions in the inferior for a corefile. */
+
+static int
+linux_nat_find_memory_regions (int (*func) (CORE_ADDR,
+ unsigned long,
+ int, int, int, void *), void *obfd)
+{
+ long long pid = PIDGET (inferior_ptid);
+ char mapsfilename[MAXPATHLEN];
+ FILE *mapsfile;
+ long long addr, endaddr, size, offset, inode;
+ char permissions[8], device[8], filename[MAXPATHLEN];
+ int read, write, exec;
+ int ret;
+
+ /* Compose the filename for the /proc memory map, and open it. */
+ sprintf (mapsfilename, "/proc/%lld/maps", pid);
+ if ((mapsfile = fopen (mapsfilename, "r")) == NULL)
+ error (_("Could not open %s."), mapsfilename);
+
+ if (info_verbose)
+ fprintf_filtered (gdb_stdout,
+ "Reading memory regions from %s\n", mapsfilename);
+
+ /* Now iterate until end-of-file. */
+ while (read_mapping (mapsfile, &addr, &endaddr, &permissions[0],
+ &offset, &device[0], &inode, &filename[0]))
+ {
+ size = endaddr - addr;
+
+ /* Get the segment's permissions. */
+ read = (strchr (permissions, 'r') != 0);
+ write = (strchr (permissions, 'w') != 0);
+ exec = (strchr (permissions, 'x') != 0);
+
+ if (info_verbose)
+ {
+ fprintf_filtered (gdb_stdout,
+ "Save segment, %lld bytes at 0x%s (%c%c%c)",
+ size, paddr_nz (addr),
+ read ? 'r' : ' ',
+ write ? 'w' : ' ', exec ? 'x' : ' ');
+ if (filename && filename[0])
+ fprintf_filtered (gdb_stdout, " for %s", filename);
+ fprintf_filtered (gdb_stdout, "\n");
+ }
+
+ /* Invoke the callback function to create the corefile
+ segment. */
+ func (addr, size, read, write, exec, obfd);
+ }
+ fclose (mapsfile);
+ return 0;
+}
+
+/* Records the thread's register state for the corefile note
+ section. */
+
+static char *
+linux_nat_do_thread_registers (bfd *obfd, ptid_t ptid,
+ char *note_data, int *note_size)
+{
+ gdb_gregset_t gregs;
+ gdb_fpregset_t fpregs;
+#ifdef FILL_FPXREGSET
+ gdb_fpxregset_t fpxregs;
+#endif
+ unsigned long lwp = ptid_get_lwp (ptid);
+ struct gdbarch *gdbarch = current_gdbarch;
+ const struct regset *regset;
+ int core_regset_p;
+
+ core_regset_p = gdbarch_regset_from_core_section_p (gdbarch);
+ if (core_regset_p
+ && (regset = gdbarch_regset_from_core_section (gdbarch, ".reg",
+ sizeof (gregs))) != NULL
+ && regset->collect_regset != NULL)
+ regset->collect_regset (regset, current_regcache, -1,
+ &gregs, sizeof (gregs));
+ else
+ fill_gregset (&gregs, -1);
+
+ note_data = (char *) elfcore_write_prstatus (obfd,
+ note_data,
+ note_size,
+ lwp,
+ stop_signal, &gregs);
+
+ if (core_regset_p
+ && (regset = gdbarch_regset_from_core_section (gdbarch, ".reg2",
+ sizeof (fpregs))) != NULL
+ && regset->collect_regset != NULL)
+ regset->collect_regset (regset, current_regcache, -1,
+ &fpregs, sizeof (fpregs));
+ else
+ fill_fpregset (&fpregs, -1);
+
+ note_data = (char *) elfcore_write_prfpreg (obfd,
+ note_data,
+ note_size,
+ &fpregs, sizeof (fpregs));
+
+#ifdef FILL_FPXREGSET
+ if (core_regset_p
+ && (regset = gdbarch_regset_from_core_section (gdbarch, ".reg-xfp",
+ sizeof (fpxregs))) != NULL
+ && regset->collect_regset != NULL)
+ regset->collect_regset (regset, current_regcache, -1,
+ &fpxregs, sizeof (fpxregs));
+ else
+ fill_fpxregset (&fpxregs, -1);
+
+ note_data = (char *) elfcore_write_prxfpreg (obfd,
+ note_data,
+ note_size,
+ &fpxregs, sizeof (fpxregs));
+#endif
+ return note_data;
+}
+
+struct linux_nat_corefile_thread_data
+{
+ bfd *obfd;
+ char *note_data;
+ int *note_size;
+ int num_notes;
+};
+
+/* Called by gdbthread.c once per thread. Records the thread's
+ register state for the corefile note section. */
+
+static int
+linux_nat_corefile_thread_callback (struct lwp_info *ti, void *data)
+{
+ struct linux_nat_corefile_thread_data *args = data;
+ ptid_t saved_ptid = inferior_ptid;
+
+ inferior_ptid = ti->ptid;
+ registers_changed ();
+ target_fetch_registers (-1); /* FIXME should not be necessary;
+ fill_gregset should do it automatically. */
+ args->note_data = linux_nat_do_thread_registers (args->obfd,
+ ti->ptid,
+ args->note_data,
+ args->note_size);
+ args->num_notes++;
+ inferior_ptid = saved_ptid;
+ registers_changed ();
+ target_fetch_registers (-1); /* FIXME should not be necessary;
+ fill_gregset should do it automatically. */
+ return 0;
+}
+
+/* Records the register state for the corefile note section. */
+
+static char *
+linux_nat_do_registers (bfd *obfd, ptid_t ptid,
+ char *note_data, int *note_size)
+{
+ registers_changed ();
+ target_fetch_registers (-1); /* FIXME should not be necessary;
+ fill_gregset should do it automatically. */
+ return linux_nat_do_thread_registers (obfd,
+ ptid_build (ptid_get_pid (inferior_ptid),
+ ptid_get_pid (inferior_ptid),
+ 0),
+ note_data, note_size);
+ return note_data;
+}
+
+/* Fills the "to_make_corefile_note" target vector. Builds the note
+ section for a corefile, and returns it in a malloc buffer. */
+
+static char *
+linux_nat_make_corefile_notes (bfd *obfd, int *note_size)
+{
+ struct linux_nat_corefile_thread_data thread_args;
+ struct cleanup *old_chain;
+ char fname[16] = { '\0' };
+ char psargs[80] = { '\0' };
+ char *note_data = NULL;
+ ptid_t current_ptid = inferior_ptid;
+ gdb_byte *auxv;
+ int auxv_len;
+
+ if (get_exec_file (0))
+ {
+ strncpy (fname, strrchr (get_exec_file (0), '/') + 1, sizeof (fname));
+ strncpy (psargs, get_exec_file (0), sizeof (psargs));
+ if (get_inferior_args ())
+ {
+ strncat (psargs, " ", sizeof (psargs) - strlen (psargs));
+ strncat (psargs, get_inferior_args (),
+ sizeof (psargs) - strlen (psargs));
+ }
+ note_data = (char *) elfcore_write_prpsinfo (obfd,
+ note_data,
+ note_size, fname, psargs);
+ }
+
+ /* Dump information for threads. */
+ thread_args.obfd = obfd;
+ thread_args.note_data = note_data;
+ thread_args.note_size = note_size;
+ thread_args.num_notes = 0;
+ iterate_over_lwps (linux_nat_corefile_thread_callback, &thread_args);
+ if (thread_args.num_notes == 0)
+ {
+ /* iterate_over_threads didn't come up with any threads; just
+ use inferior_ptid. */
+ note_data = linux_nat_do_registers (obfd, inferior_ptid,
+ note_data, note_size);
+ }
+ else
+ {
+ note_data = thread_args.note_data;
+ }
+
+ auxv_len = target_read_alloc (¤t_target, TARGET_OBJECT_AUXV,
+ NULL, &auxv);
+ if (auxv_len > 0)
+ {
+ note_data = elfcore_write_note (obfd, note_data, note_size,
+ "CORE", NT_AUXV, auxv, auxv_len);
+ xfree (auxv);
+ }
+
+ make_cleanup (xfree, note_data);
+ return note_data;
+}
+
+/* Implement the "info proc" command. */
+
+static void
+linux_nat_info_proc_cmd (char *args, int from_tty)
+{
+ long long pid = PIDGET (inferior_ptid);
+ FILE *procfile;
+ char **argv = NULL;
+ char buffer[MAXPATHLEN];
+ char fname1[MAXPATHLEN], fname2[MAXPATHLEN];
+ int cmdline_f = 1;
+ int cwd_f = 1;
+ int exe_f = 1;
+ int mappings_f = 0;
+ int environ_f = 0;
+ int status_f = 0;
+ int stat_f = 0;
+ int all = 0;
+ struct stat dummy;
+
+ if (args)
+ {
+ /* Break up 'args' into an argv array. */
+ if ((argv = buildargv (args)) == NULL)
+ nomem (0);
+ else
+ make_cleanup_freeargv (argv);
+ }
+ while (argv != NULL && *argv != NULL)
+ {
+ if (isdigit (argv[0][0]))
+ {
+ pid = strtoul (argv[0], NULL, 10);
+ }
+ else if (strncmp (argv[0], "mappings", strlen (argv[0])) == 0)
+ {
+ mappings_f = 1;
+ }
+ else if (strcmp (argv[0], "status") == 0)
+ {
+ status_f = 1;
+ }
+ else if (strcmp (argv[0], "stat") == 0)
+ {
+ stat_f = 1;
+ }
+ else if (strcmp (argv[0], "cmd") == 0)
+ {
+ cmdline_f = 1;
+ }
+ else if (strncmp (argv[0], "exe", strlen (argv[0])) == 0)
+ {
+ exe_f = 1;
+ }
+ else if (strcmp (argv[0], "cwd") == 0)
+ {
+ cwd_f = 1;
+ }
+ else if (strncmp (argv[0], "all", strlen (argv[0])) == 0)
+ {
+ all = 1;
+ }
+ else
+ {
+ /* [...] (future options here) */
+ }
+ argv++;
+ }
+ if (pid == 0)
+ error (_("No current process: you must name one."));
+
+ sprintf (fname1, "/proc/%lld", pid);
+ if (stat (fname1, &dummy) != 0)
+ error (_("No /proc directory: '%s'"), fname1);
+
+ printf_filtered (_("process %lld\n"), pid);
+ if (cmdline_f || all)
+ {
+ sprintf (fname1, "/proc/%lld/cmdline", pid);
+ if ((procfile = fopen (fname1, "r")) > 0)
+ {
+ fgets (buffer, sizeof (buffer), procfile);
+ printf_filtered ("cmdline = '%s'\n", buffer);
+ fclose (procfile);
+ }
+ else
+ warning (_("unable to open /proc file '%s'"), fname1);
+ }
+ if (cwd_f || all)
+ {
+ sprintf (fname1, "/proc/%lld/cwd", pid);
+ memset (fname2, 0, sizeof (fname2));
+ if (readlink (fname1, fname2, sizeof (fname2)) > 0)
+ printf_filtered ("cwd = '%s'\n", fname2);
+ else
+ warning (_("unable to read link '%s'"), fname1);
+ }
+ if (exe_f || all)
+ {
+ sprintf (fname1, "/proc/%lld/exe", pid);
+ memset (fname2, 0, sizeof (fname2));
+ if (readlink (fname1, fname2, sizeof (fname2)) > 0)
+ printf_filtered ("exe = '%s'\n", fname2);
+ else
+ warning (_("unable to read link '%s'"), fname1);
+ }
+ if (mappings_f || all)
+ {
+ sprintf (fname1, "/proc/%lld/maps", pid);
+ if ((procfile = fopen (fname1, "r")) > 0)
+ {
+ long long addr, endaddr, size, offset, inode;
+ char permissions[8], device[8], filename[MAXPATHLEN];
+
+ printf_filtered (_("Mapped address spaces:\n\n"));
+ if (TARGET_ADDR_BIT == 32)
+ {
+ printf_filtered ("\t%10s %10s %10s %10s %7s\n",
+ "Start Addr",
+ " End Addr",
+ " Size", " Offset", "objfile");
+ }
+ else
+ {
+ printf_filtered (" %18s %18s %10s %10s %7s\n",
+ "Start Addr",
+ " End Addr",
+ " Size", " Offset", "objfile");
+ }
+
+ while (read_mapping (procfile, &addr, &endaddr, &permissions[0],
+ &offset, &device[0], &inode, &filename[0]))
+ {
+ size = endaddr - addr;
+
+ /* FIXME: carlton/2003-08-27: Maybe the printf_filtered
+ calls here (and possibly above) should be abstracted
+ out into their own functions? Andrew suggests using
+ a generic local_address_string instead to print out
+ the addresses; that makes sense to me, too. */
+
+ if (TARGET_ADDR_BIT == 32)
+ {
+ printf_filtered ("\t%#10lx %#10lx %#10x %#10x %7s\n",
+ (unsigned long) addr, /* FIXME: pr_addr */
+ (unsigned long) endaddr,
+ (int) size,
+ (unsigned int) offset,
+ filename[0] ? filename : "");
+ }
+ else
+ {
+ printf_filtered (" %#18lx %#18lx %#10x %#10x %7s\n",
+ (unsigned long) addr, /* FIXME: pr_addr */
+ (unsigned long) endaddr,
+ (int) size,
+ (unsigned int) offset,
+ filename[0] ? filename : "");
+ }
+ }
+
+ fclose (procfile);
+ }
+ else
+ warning (_("unable to open /proc file '%s'"), fname1);
+ }
+ if (status_f || all)
+ {
+ sprintf (fname1, "/proc/%lld/status", pid);
+ if ((procfile = fopen (fname1, "r")) > 0)
+ {
+ while (fgets (buffer, sizeof (buffer), procfile) != NULL)
+ puts_filtered (buffer);
+ fclose (procfile);
+ }
+ else
+ warning (_("unable to open /proc file '%s'"), fname1);
+ }
+ if (stat_f || all)
+ {
+ sprintf (fname1, "/proc/%lld/stat", pid);
+ if ((procfile = fopen (fname1, "r")) > 0)
+ {
+ int itmp;
+ char ctmp;
+
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("Process: %d\n"), itmp);
+ if (fscanf (procfile, "%s ", &buffer[0]) > 0)
+ printf_filtered (_("Exec file: %s\n"), buffer);
+ if (fscanf (procfile, "%c ", &ctmp) > 0)
+ printf_filtered (_("State: %c\n"), ctmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("Parent process: %d\n"), itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("Process group: %d\n"), itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("Session id: %d\n"), itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("TTY: %d\n"), itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("TTY owner process group: %d\n"), itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("Flags: 0x%x\n"), itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("Minor faults (no memory page): %u\n"),
+ (unsigned int) itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("Minor faults, children: %u\n"),
+ (unsigned int) itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("Major faults (memory page faults): %u\n"),
+ (unsigned int) itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("Major faults, children: %u\n"),
+ (unsigned int) itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered ("utime: %d\n", itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered ("stime: %d\n", itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered ("utime, children: %d\n", itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered ("stime, children: %d\n", itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("jiffies remaining in current time slice: %d\n"),
+ itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered ("'nice' value: %d\n", itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("jiffies until next timeout: %u\n"),
+ (unsigned int) itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered ("jiffies until next SIGALRM: %u\n",
+ (unsigned int) itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("start time (jiffies since system boot): %d\n"),
+ itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("Virtual memory size: %u\n"),
+ (unsigned int) itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("Resident set size: %u\n"), (unsigned int) itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered ("rlim: %u\n", (unsigned int) itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("Start of text: 0x%x\n"), itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("End of text: 0x%x\n"), itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0)
+ printf_filtered (_("Start of stack: 0x%x\n"), itmp);
+#if 0 /* Don't know how architecture-dependent the rest is...
+ Anyway the signal bitmap info is available from "status". */
+ if (fscanf (procfile, "%u ", &itmp) > 0) /* FIXME arch? */
+ printf_filtered (_("Kernel stack pointer: 0x%x\n"), itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0) /* FIXME arch? */
+ printf_filtered (_("Kernel instr pointer: 0x%x\n"), itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("Pending signals bitmap: 0x%x\n"), itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("Blocked signals bitmap: 0x%x\n"), itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("Ignored signals bitmap: 0x%x\n"), itmp);
+ if (fscanf (procfile, "%d ", &itmp) > 0)
+ printf_filtered (_("Catched signals bitmap: 0x%x\n"), itmp);
+ if (fscanf (procfile, "%u ", &itmp) > 0) /* FIXME arch? */
+ printf_filtered (_("wchan (system call): 0x%x\n"), itmp);
+#endif
+ fclose (procfile);
+ }
+ else
+ warning (_("unable to open /proc file '%s'"), fname1);
+ }
+}
+
+/* Implement the to_xfer_partial interface for memory reads using the /proc
+ filesystem. Because we can use a single read() call for /proc, this
+ can be much more efficient than banging away at PTRACE_PEEKTEXT,
+ but it doesn't support writes. */
+
+static LONGEST
+linux_proc_xfer_partial (struct target_ops *ops, enum target_object object,
+ const char *annex, gdb_byte *readbuf,
+ const gdb_byte *writebuf,
+ ULONGEST offset, LONGEST len)
+{
+ LONGEST ret;
+ int fd;
+ char filename[64];
+
+ if (object != TARGET_OBJECT_MEMORY || !readbuf)
+ return 0;
+
+ /* Don't bother for one word. */
+ if (len < 3 * sizeof (long))
+ return 0;
+
+ /* We could keep this file open and cache it - possibly one per
+ thread. That requires some juggling, but is even faster. */
+ sprintf (filename, "/proc/%d/mem", PIDGET (inferior_ptid));
+ fd = open (filename, O_RDONLY | O_LARGEFILE);
+ if (fd == -1)
+ return 0;
+
+ /* If pread64 is available, use it. It's faster if the kernel
+ supports it (only one syscall), and it's 64-bit safe even on
+ 32-bit platforms (for instance, SPARC debugging a SPARC64
+ application). */
+#ifdef HAVE_PREAD64
+ if (pread64 (fd, readbuf, len, offset) != len)
+#else
+ if (lseek (fd, offset, SEEK_SET) == -1 || read (fd, readbuf, len) != len)
+#endif
+ ret = 0;
+ else
+ ret = len;
+
+ close (fd);
+ return ret;
+}
+
+/* Parse LINE as a signal set and add its set bits to SIGS. */
+
+static void
+add_line_to_sigset (const char *line, sigset_t *sigs)
+{
+ int len = strlen (line) - 1;
+ const char *p;
+ int signum;
+
+ if (line[len] != '\n')
+ error (_("Could not parse signal set: %s"), line);
+
+ p = line;
+ signum = len * 4;
+ while (len-- > 0)
+ {
+ int digit;
+
+ if (*p >= '0' && *p <= '9')
+ digit = *p - '0';
+ else if (*p >= 'a' && *p <= 'f')
+ digit = *p - 'a' + 10;
+ else
+ error (_("Could not parse signal set: %s"), line);
+
+ signum -= 4;
+
+ if (digit & 1)
+ sigaddset (sigs, signum + 1);
+ if (digit & 2)
+ sigaddset (sigs, signum + 2);
+ if (digit & 4)
+ sigaddset (sigs, signum + 3);
+ if (digit & 8)
+ sigaddset (sigs, signum + 4);
+
+ p++;
+ }
+}
+
+/* Find process PID's pending signals from /proc/pid/status and set
+ SIGS to match. */
+
+void
+linux_proc_pending_signals (int pid, sigset_t *pending, sigset_t *blocked, sigset_t *ignored)
+{
+ FILE *procfile;
+ char buffer[MAXPATHLEN], fname[MAXPATHLEN];
+ int signum;
+
+ sigemptyset (pending);
+ sigemptyset (blocked);
+ sigemptyset (ignored);
+ sprintf (fname, "/proc/%d/status", pid);
+ procfile = fopen (fname, "r");
+ if (procfile == NULL)
+ error (_("Could not open %s"), fname);
+
+ while (fgets (buffer, MAXPATHLEN, procfile) != NULL)
+ {
+ /* Normal queued signals are on the SigPnd line in the status
+ file. However, 2.6 kernels also have a "shared" pending
+ queue for delivering signals to a thread group, so check for
+ a ShdPnd line also.
+
+ Unfortunately some Red Hat kernels include the shared pending
+ queue but not the ShdPnd status field. */
+
+ if (strncmp (buffer, "SigPnd:\t", 8) == 0)
+ add_line_to_sigset (buffer + 8, pending);
+ else if (strncmp (buffer, "ShdPnd:\t", 8) == 0)
+ add_line_to_sigset (buffer + 8, pending);
+ else if (strncmp (buffer, "SigBlk:\t", 8) == 0)
+ add_line_to_sigset (buffer + 8, blocked);
+ else if (strncmp (buffer, "SigIgn:\t", 8) == 0)
+ add_line_to_sigset (buffer + 8, ignored);
+ }
+
+ fclose (procfile);
+}
+
+static LONGEST
+linux_xfer_partial (struct target_ops *ops, enum target_object object,
+ const char *annex, gdb_byte *readbuf,
+ const gdb_byte *writebuf, ULONGEST offset, LONGEST len)
+{
+ LONGEST xfer;
+
+ if (object == TARGET_OBJECT_AUXV)
+ return procfs_xfer_auxv (ops, object, annex, readbuf, writebuf,
+ offset, len);
+
+ xfer = linux_proc_xfer_partial (ops, object, annex, readbuf, writebuf,
+ offset, len);
+ if (xfer != 0)
+ return xfer;
+
+ return super_xfer_partial (ops, object, annex, readbuf, writebuf,
+ offset, len);
+}
+
+#ifndef FETCH_INFERIOR_REGISTERS
+
+/* Return the address in the core dump or inferior of register
+ REGNO. */
+
+static CORE_ADDR
+linux_register_u_offset (int regno)
+{
+ /* FIXME drow/2005-09-04: The hardcoded use of register_addr should go
+ away. This requires disentangling the various definitions of it
+ (particularly alpha-nat.c's). */
+ return register_addr (regno, 0);
+}
+
+#endif
+
+/* Create a prototype generic Linux target. The client can override
+ it with local methods. */
+
+struct target_ops *
+linux_target (void)
+{
+ struct target_ops *t;
+
+#ifdef FETCH_INFERIOR_REGISTERS
+ t = inf_ptrace_target ();
+#else
+ t = inf_ptrace_trad_target (linux_register_u_offset);
+#endif
+ t->to_insert_fork_catchpoint = child_insert_fork_catchpoint;
+ t->to_insert_vfork_catchpoint = child_insert_vfork_catchpoint;
+ t->to_insert_exec_catchpoint = child_insert_exec_catchpoint;
+ t->to_pid_to_exec_file = child_pid_to_exec_file;
+ t->to_post_startup_inferior = linux_child_post_startup_inferior;
+ t->to_post_attach = child_post_attach;
+ t->to_follow_fork = child_follow_fork;
+ t->to_find_memory_regions = linux_nat_find_memory_regions;
+ t->to_make_corefile_notes = linux_nat_make_corefile_notes;
+
+ super_xfer_partial = t->to_xfer_partial;
+ t->to_xfer_partial = linux_xfer_partial;
+
+ return t;
+}
+
+void
+linux_nat_add_target (struct target_ops *t)
+{
+ /* Save the provided single-threaded target. We save this in a separate
+ variable because another target we've inherited from (e.g. inf-ptrace)
+ may have saved a pointer to T; we want to use it for the final
+ process stratum target. */
+ linux_ops_saved = *t;
+ linux_ops = &linux_ops_saved;
+
+ /* Override some methods for multithreading. */
+ t->to_attach = linux_nat_attach;
+ t->to_detach = linux_nat_detach;
+ t->to_resume = linux_nat_resume;
+ t->to_wait = linux_nat_wait;
+ t->to_xfer_partial = linux_nat_xfer_partial;
+ t->to_kill = linux_nat_kill;
+ t->to_mourn_inferior = linux_nat_mourn_inferior;
+ t->to_thread_alive = linux_nat_thread_alive;
+ t->to_pid_to_str = linux_nat_pid_to_str;
+ t->to_has_thread_control = tc_schedlock;
+
+ /* We don't change the stratum; this target will sit at
+ process_stratum and thread_db will set at thread_stratum. This
+ is a little strange, since this is a multi-threaded-capable
+ target, but we want to be on the stack below thread_db, and we
+ also want to be used for single-threaded processes. */
+
+ add_target (t);
+
+ /* TODO: Eliminate this and have libthread_db use
+ find_target_beneath. */
+ thread_db_init (t);
+}
+
+void
+_initialize_linux_nat (void)
+{
+ struct sigaction action;
+
+ add_info ("proc", linux_nat_info_proc_cmd, _("\
+Show /proc process information about any running process.\n\
+Specify any process id, or use the program being debugged by default.\n\
+Specify any of the following keywords for detailed info:\n\
+ mappings -- list of mapped memory regions.\n\
+ stat -- list a bunch of random process info.\n\
+ status -- list a different bunch of random process info.\n\
+ all -- list all available /proc info."));
+
+ /* Save the original signal mask. */
+ sigprocmask (SIG_SETMASK, NULL, &normal_mask);
+
+ action.sa_handler = sigchld_handler;
+ sigemptyset (&action.sa_mask);
+ action.sa_flags = SA_RESTART;
+ sigaction (SIGCHLD, &action, NULL);
+
+ /* Make sure we don't block SIGCHLD during a sigsuspend. */
+ sigprocmask (SIG_SETMASK, NULL, &suspend_mask);
+ sigdelset (&suspend_mask, SIGCHLD);
+
+ sigemptyset (&blocked_mask);
+
+ add_setshow_zinteger_cmd ("lin-lwp", no_class, &debug_linux_nat, _("\
+Set debugging of GNU/Linux lwp module."), _("\
+Show debugging of GNU/Linux lwp module."), _("\
+Enables printf debugging output."),
+ NULL,
+ show_debug_linux_nat,
+ &setdebuglist, &showdebuglist);
+}
+\f
+
+/* FIXME: kettenis/2000-08-26: The stuff on this page is specific to
+ the GNU/Linux Threads library and therefore doesn't really belong
+ here. */
+
+/* Read variable NAME in the target and return its value if found.
+ Otherwise return zero. It is assumed that the type of the variable
+ is `int'. */
+
+static int
+get_signo (const char *name)
+{
+ struct minimal_symbol *ms;
+ int signo;
+
+ ms = lookup_minimal_symbol (name, NULL, NULL);
+ if (ms == NULL)
+ return 0;
+
+ if (target_read_memory (SYMBOL_VALUE_ADDRESS (ms), (gdb_byte *) &signo,
+ sizeof (signo)) != 0)
+ return 0;
+
+ return signo;
+}
+
+/* Return the set of signals used by the threads library in *SET. */
+
+void
+lin_thread_get_thread_signals (sigset_t *set)
+{
+ struct sigaction action;
+ int restart, cancel;
+
+ sigemptyset (set);
+
+ restart = get_signo ("__pthread_sig_restart");
+ cancel = get_signo ("__pthread_sig_cancel");
+
+ /* LinuxThreads normally uses the first two RT signals, but in some legacy
+ cases may use SIGUSR1/SIGUSR2. NPTL always uses RT signals, but does
+ not provide any way for the debugger to query the signal numbers -
+ fortunately they don't change! */
+
+ if (restart == 0)
+ restart = __SIGRTMIN;
+
+ if (cancel == 0)
+ cancel = __SIGRTMIN + 1;
+
+ sigaddset (set, restart);
+ sigaddset (set, cancel);
+
+ /* The GNU/Linux Threads library makes terminating threads send a
+ special "cancel" signal instead of SIGCHLD. Make sure we catch
+ those (to prevent them from terminating GDB itself, which is
+ likely to be their default action) and treat them the same way as
+ SIGCHLD. */
+
+ action.sa_handler = sigchld_handler;
+ sigemptyset (&action.sa_mask);
+ action.sa_flags = SA_RESTART;
+ sigaction (cancel, &action, NULL);
+
+ /* We block the "cancel" signal throughout this code ... */
+ sigaddset (&blocked_mask, cancel);
+ sigprocmask (SIG_BLOCK, &blocked_mask, NULL);
+
+ /* ... except during a sigsuspend. */
+ sigdelset (&suspend_mask, cancel);
+}
projects / deliverable / binutils-gdb.git / blobdiff