/* Remote debugging interface to m32r and mon2000 ROM monitors for GDB,
the GNU debugger.
- Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2004, 2005, 2007, 2008,
- 2009 Free Software Foundation, Inc.
+ Copyright (C) 1996-2013 Free Software Foundation, Inc.
Adapted by Michael Snyder of Cygnus Support.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
-/* This module defines communication with the Renesas m32r monitor */
+/* This module defines communication with the Renesas m32r monitor. */
#include "defs.h"
#include "gdbcore.h"
#include <sys/time.h>
#include <time.h> /* for time_t */
#include "gdb_string.h"
-#include "objfiles.h" /* for ALL_OBJFILES etc. */
-#include "inferior.h" /* for write_pc() */
+#include "objfiles.h" /* for ALL_OBJFILES etc. */
+#include "inferior.h"
#include <ctype.h>
#include "regcache.h"
+#include "gdb_bfd.h"
+#include "cli/cli-utils.h"
/*
* All this stuff just to get my host computer's IP address!
*/
#ifdef __MINGW32__
-#include <winsock.h>
+#include <winsock2.h>
#else
#include <sys/types.h>
#include <netdb.h> /* for hostent */
unsigned int *data_count = obj;
if (s->flags & SEC_LOAD)
{
+ int addr_size = gdbarch_addr_bit (target_gdbarch ()) / 8;
bfd_size_type section_size = bfd_section_size (abfd, s);
bfd_vma section_base = bfd_section_lma (abfd, s);
unsigned int buffer, i;
printf_filtered ("Loading section %s, size 0x%lx lma ",
bfd_section_name (abfd, s),
(unsigned long) section_size);
- fputs_filtered (paddress (section_base), gdb_stdout);
+ fputs_filtered (paddress (target_gdbarch (), section_base), gdb_stdout);
printf_filtered ("\n");
gdb_flush (gdb_stdout);
- monitor_printf ("%s mw\r", paddr_nz (section_base));
+ monitor_printf ("%s mw\r", phex_nz (section_base, addr_size));
for (i = 0; i < section_size; i += 4)
{
QUIT;
m32r_load (char *filename, int from_tty)
{
bfd *abfd;
- asection *s;
- unsigned int i, data_count = 0;
+ unsigned int data_count = 0;
struct timeval start_time, end_time;
+ struct cleanup *cleanup;
if (filename == NULL || filename[0] == 0)
filename = get_exec_file (1);
- abfd = bfd_openr (filename, 0);
+ abfd = gdb_bfd_open (filename, NULL, -1);
if (!abfd)
error (_("Unable to open file %s."), filename);
+ cleanup = make_cleanup_bfd_unref (abfd);
if (bfd_check_format (abfd, bfd_object) == 0)
error (_("File is not an object file."));
gettimeofday (&start_time, NULL);
printf_filtered ("Loading section %s, size 0x%lx vma ",
bfd_section_name (abfd, s), section_size);
- fputs_filtered (paddress (section_base), gdb_stdout);
+ fputs_filtered (paddress (target_gdbarch (), section_base), gdb_stdout);
printf_filtered ("\n");
gdb_flush (gdb_stdout);
monitor_printf ("%x mw\r", section_base);
print_transfer_performance (gdb_stdout, data_count, 0, &start_time,
&end_time);
- /* Finally, make the PC point at the start address */
+ /* Finally, make the PC point at the start address. */
if (exec_bfd)
- write_pc (bfd_get_start_address (exec_bfd));
+ regcache_write_pc (get_current_regcache (),
+ bfd_get_start_address (exec_bfd));
- inferior_ptid = null_ptid; /* No process now */
+ inferior_ptid = null_ptid; /* No process now. */
/* This is necessary because many things were based on the PC at the
time that we attached to the monitor, which is no longer valid
now that we have loaded new code (and just changed the PC).
Another way to do this might be to call normal_stop, except that
the stack may not be valid, and things would get horribly
- confused... */
+ confused... */
- clear_symtab_users ();
+ clear_symtab_users (0);
+ do_cleanups (cleanup);
}
static void
static void m32r_open (char *args, int from_tty);
static void mon2000_open (char *args, int from_tty);
-/* This array of registers needs to match the indexes used by GDB. The
+/* This array of registers needs to match the indexes used by GDB. The
whole reason this exists is because the various ROM monitors use
different names than GDB does, and don't support all the registers
- either. So, typing "info reg sp" becomes an "A7". */
+ either. So, typing "info reg sp" becomes an "A7". */
static char *m32r_regnames[] =
{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
return; /* no match */
if (regno == ACCL_REGNUM)
- { /* special handling for 64-bit acc reg */
+ { /* Special handling for 64-bit acc reg. */
monitor_supply_register (regcache, ACCH_REGNUM, val);
- val = strchr (val, ':'); /* skip past ':' to get 2nd word */
+ val = strchr (val, ':'); /* Skip past ':' to get 2nd word. */
if (val != NULL)
monitor_supply_register (regcache, ACCL_REGNUM, val + 1);
}
monitor_supply_register (regcache, regno, val);
if (regno == PSW_REGNUM)
{
+#if (defined SM_REGNUM || defined BSM_REGNUM || defined IE_REGNUM \
+ || defined BIE_REGNUM || defined COND_REGNUM || defined CBR_REGNUM \
+ || defined BPC_REGNUM || defined BCARRY_REGNUM)
unsigned long psw = strtoul (val, NULL, 16);
char *zero = "00000000", *one = "00000001";
+#endif
#ifdef SM_REGNUM
/* Stack mode bit */
- monitor_supply_register (regcache, SM_REGNUM, (psw & 0x80) ? one : zero);
+ monitor_supply_register (regcache, SM_REGNUM,
+ (psw & 0x80) ? one : zero);
#endif
#ifdef BSM_REGNUM
/* Backup stack mode bit */
- monitor_supply_register (regcache, BSM_REGNUM, (psw & 0x8000) ? one : zero);
+ monitor_supply_register (regcache, BSM_REGNUM,
+ (psw & 0x8000) ? one : zero);
#endif
#ifdef IE_REGNUM
/* Interrupt enable bit */
- monitor_supply_register (regcache, IE_REGNUM, (psw & 0x40) ? one : zero);
+ monitor_supply_register (regcache, IE_REGNUM,
+ (psw & 0x40) ? one : zero);
#endif
#ifdef BIE_REGNUM
/* Backup interrupt enable bit */
- monitor_supply_register (regcache, BIE_REGNUM, (psw & 0x4000) ? one : zero);
+ monitor_supply_register (regcache, BIE_REGNUM,
+ (psw & 0x4000) ? one : zero);
#endif
#ifdef COND_REGNUM
/* Condition bit (carry etc.) */
- monitor_supply_register (regcache, COND_REGNUM, (psw & 0x1) ? one : zero);
+ monitor_supply_register (regcache, COND_REGNUM,
+ (psw & 0x1) ? one : zero);
#endif
#ifdef CBR_REGNUM
- monitor_supply_register (regcache, CBR_REGNUM, (psw & 0x1) ? one : zero);
+ monitor_supply_register (regcache, CBR_REGNUM,
+ (psw & 0x1) ? one : zero);
#endif
#ifdef BPC_REGNUM
- monitor_supply_register (regcache, BPC_REGNUM, zero); /* KLUDGE: (???????) */
+ monitor_supply_register (regcache, BPC_REGNUM,
+ zero); /* KLUDGE: (???????) */
#endif
#ifdef BCARRY_REGNUM
- monitor_supply_register (regcache, BCARRY_REGNUM, zero); /* KLUDGE: (??????) */
+ monitor_supply_register (regcache, BCARRY_REGNUM,
+ zero); /* KLUDGE: (??????) */
#endif
}
if (regno == SPI_REGNUM || regno == SPU_REGNUM)
- { /* special handling for stack pointer (spu or spi) */
+ { /* special handling for stack pointer (spu or spi). */
ULONGEST stackmode, psw;
regcache_cooked_read_unsigned (regcache, PSW_REGNUM, &psw);
stackmode = psw & 0x80;
m32r_cmds.getreg.term = NULL; /* getreg.term */
m32r_cmds.getreg.term_cmd = NULL; /* getreg.term_cmd */
m32r_cmds.dump_registers = ".reg\r"; /* dump_registers */
- m32r_cmds.register_pattern = "\\(\\w+\\) += \\([0-9a-fA-F]+\\b\\)"; /* register_pattern */
+ /* register_pattern */
+ m32r_cmds.register_pattern = "\\(\\w+\\) += \\([0-9a-fA-F]+\\b\\)";
m32r_cmds.supply_register = m32r_supply_register;
- m32r_cmds.load_routine = NULL; /* load_routine (defaults to SRECs) */
m32r_cmds.load = NULL; /* download command */
m32r_cmds.loadresp = NULL; /* load response */
m32r_cmds.prompt = "ok "; /* monitor command prompt */
mon2000_cmds.getreg.term = NULL; /* getreg.term */
mon2000_cmds.getreg.term_cmd = NULL; /* getreg.term_cmd */
mon2000_cmds.dump_registers = ".reg\r"; /* dump_registers */
- mon2000_cmds.register_pattern = "\\(\\w+\\) += \\([0-9a-fA-F]+\\b\\)"; /* register_pattern */
+ /* register_pattern */
+ mon2000_cmds.register_pattern = "\\(\\w+\\) += \\([0-9a-fA-F]+\\b\\)";
mon2000_cmds.supply_register = m32r_supply_register;
- mon2000_cmds.load_routine = NULL; /* load_routine (defaults to SRECs) */
mon2000_cmds.load = NULL; /* download command */
mon2000_cmds.loadresp = NULL; /* load response */
mon2000_cmds.prompt = "Mon2000>"; /* monitor command prompt */
char buf[1024];
struct hostent *hostent;
struct in_addr inet_addr;
+ struct cleanup *cleanup;
- /* first check to see if there's an ethernet port! */
+ /* First check to see if there's an ethernet port! */
monitor_printf ("ust\r");
resp_len = monitor_expect_prompt (buf, sizeof (buf));
if (!strchr (buf, ':'))
if (board_addr == 0)
{
- /* scan second colon in the output from the "ust" command */
+ /* Scan second colon in the output from the "ust" command. */
char *myIPaddress = strchr (strchr (buf, ':') + 1, ':') + 1;
- while (isspace (*myIPaddress))
- myIPaddress++;
+ myIPaddress = skip_spaces (myIPaddress);
if (!strncmp (myIPaddress, "0.0.", 4)) /* empty */
- error
- ("Please use 'set board-address' to set the M32R-EVA board's IP address.");
+ error (_("Please use 'set board-address' to "
+ "set the M32R-EVA board's IP address."));
if (strchr (myIPaddress, '('))
*(strchr (myIPaddress, '(')) = '\0'; /* delete trailing junk */
board_addr = xstrdup (myIPaddress);
{
#ifdef __MINGW32__
WSADATA wd;
- /* Winsock initialization. */
+ /* Winsock initialization. */
if (WSAStartup (MAKEWORD (1, 1), &wd))
error (_("Couldn't initialize WINSOCK."));
#endif
#endif
}
}
- if (server_addr == 0) /* failed? */
- error
- ("Need to know gdb host computer's IP address (use 'set server-address')");
+ if (server_addr == 0) /* failed? */
+ error (_("Need to know gdb host computer's "
+ "IP address (use 'set server-address')"));
}
- if (args == 0 || args[0] == 0) /* no args: upload the current file */
+ if (args == 0 || args[0] == 0) /* No args: upload the current
+ file. */
args = get_exec_file (1);
if (args[0] != '/' && download_path == 0)
if (current_directory)
download_path = xstrdup (current_directory);
else
- error
- ("Need to know default download path (use 'set download-path')");
+ error (_("Need to know default download "
+ "path (use 'set download-path')"));
}
gettimeofday (&start_time, NULL);
monitor_printf ("uhip %s\r", server_addr);
- resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */
+ resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */
monitor_printf ("ulip %s\r", board_addr);
- resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */
+ resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */
if (args[0] != '/')
monitor_printf ("up %s\r", download_path); /* use default path */
else
monitor_printf ("up\r"); /* rooted filename/path */
- resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */
+ resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */
if (strrchr (args, '.') && !strcmp (strrchr (args, '.'), ".srec"))
monitor_printf ("ul %s\r", args);
else /* add ".srec" suffix */
monitor_printf ("ul %s.srec\r", args);
- resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */
+ resp_len = monitor_expect_prompt (buf, sizeof (buf)); /* parse result? */
if (buf[0] == 0 || strstr (buf, "complete") == 0)
- error
- ("Upload file not found: %s.srec\nCheck IP addresses and download path.",
- args);
+ error (_("Upload file not found: %s.srec\n"
+ "Check IP addresses and download path."),
+ args);
else
printf_filtered (" -- Ethernet load complete.\n");
gettimeofday (&end_time, NULL);
- abfd = bfd_openr (args, 0);
+ abfd = gdb_bfd_open (args, NULL, -1);
+ cleanup = make_cleanup_bfd_unref (abfd);
if (abfd != NULL)
- { /* Download is done -- print section statistics */
+ { /* Download is done -- print section statistics. */
if (bfd_check_format (abfd, bfd_object) == 0)
{
printf_filtered ("File is not an object file\n");
{
bfd_size_type section_size = bfd_section_size (abfd, s);
bfd_vma section_base = bfd_section_lma (abfd, s);
- unsigned int buffer;
data_count += section_size;
printf_filtered ("Loading section %s, size 0x%lx lma ",
bfd_section_name (abfd, s),
(unsigned long) section_size);
- fputs_filtered (paddress (section_base), gdb_stdout);
+ fputs_filtered (paddress (target_gdbarch (), section_base),
+ gdb_stdout);
printf_filtered ("\n");
gdb_flush (gdb_stdout);
}
- /* Finally, make the PC point at the start address */
- write_pc (bfd_get_start_address (abfd));
+ /* Finally, make the PC point at the start address. */
+ regcache_write_pc (get_current_regcache (),
+ bfd_get_start_address (abfd));
printf_filtered ("Start address 0x%lx\n",
(unsigned long) bfd_get_start_address (abfd));
print_transfer_performance (gdb_stdout, data_count, 0, &start_time,
&end_time);
}
- inferior_ptid = null_ptid; /* No process now */
+ inferior_ptid = null_ptid; /* No process now. */
/* This is necessary because many things were based on the PC at the
time that we attached to the monitor, which is no longer valid
now that we have loaded new code (and just changed the PC).
Another way to do this might be to call normal_stop, except that
the stack may not be valid, and things would get horribly
- confused... */
+ confused... */
- clear_symtab_users ();
+ clear_symtab_users (0);
+ do_cleanups (cleanup);
}
+/* Provide a prototype to silence -Wmissing-prototypes. */
+extern initialize_file_ftype _initialize_m32r_rom;
+
void
_initialize_m32r_rom (void)
{
- /* Initialize m32r RevC monitor target */
+ /* Initialize m32r RevC monitor target. */
init_m32r_cmds ();
init_monitor_ops (&m32r_ops);
m32r_ops.to_shortname = "m32r";
m32r_ops.to_longname = "m32r monitor";
- m32r_ops.to_load = m32r_load_gen; /* monitor lacks a download command */
+ m32r_ops.to_load = m32r_load_gen; /* Monitor lacks a download
+ command. */
m32r_ops.to_doc = "Debug via the m32r monitor.\n\
Specify the serial device it is connected to (e.g. /dev/ttya).";
m32r_ops.to_open = m32r_open;
mon2000_ops.to_shortname = "mon2000";
mon2000_ops.to_longname = "Mon2000 monitor";
- mon2000_ops.to_load = m32r_load_gen; /* monitor lacks a download command */
+ mon2000_ops.to_load = m32r_load_gen; /* Monitor lacks a download
+ command. */
mon2000_ops.to_doc = "Debug via the Mon2000 monitor.\n\
Specify the serial device it is connected to (e.g. /dev/ttya).";
mon2000_ops.to_open = mon2000_open;
Show the default path for downloadable SREC files."), _("\
Determines the default path for downloadable SREC files."),
NULL,
- NULL, /* FIXME: i18n: The default path for downloadable SREC files is %s. */
+ NULL, /* FIXME: i18n: The default path for
+ downloadable SREC files is %s. */
&setlist, &showlist);
add_setshow_string_cmd ("board-address", class_obscure, &board_addr, _("\
Show IP address for M32R-EVA target board."), _("\
Determine the IP address for M32R-EVA target board."),
NULL,
- NULL, /* FIXME: i18n: IP address for M32R-EVA target board is %s. */
+ NULL, /* FIXME: i18n: IP address for
+ M32R-EVA target board is %s. */
&setlist, &showlist);
add_setshow_string_cmd ("server-address", class_obscure, &server_addr, _("\
Show IP address for download server (GDB's host computer)."), _("\
Determine the IP address for download server (GDB's host computer)."),
NULL,
- NULL, /* FIXME: i18n: IP address for download server (GDB's host computer) is %s. */
+ NULL, /* FIXME: i18n: IP address for
+ download server (GDB's host
+ computer) is %s. */
&setlist, &showlist);
add_com ("upload", class_obscure, m32r_upload_command, _("\