-/* Target-dependent code for Motorola 68HC11
- Copyright (C) 1999, 2000 Free Software Foundation, Inc.
- Contributed by Stephane Carrez, stcarrez@worldnet.fr
+/* Target-dependent code for Motorola 68HC11 & 68HC12
+
+ Copyright 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+ Foundation, Inc.
+
+ Contributed by Stephane Carrez, stcarrez@nerim.fr
This file is part of GDB.
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-#if 0
-/* FIXME: This is from tm-m68hc1.h */
-
-#define GDB_TARGET_IS_M6811
-
-/* Define the bit, byte, and word ordering of the machine. */
-
-#define TARGET_BYTE_ORDER BIG_ENDIAN
-
-/* Offset from address of function to start of its code.
- Zero on most machines. */
-
-#define FUNCTION_START_OFFSET 0
-
-#ifdef __STDC__ /* Forward decls for prototypes */
-struct frame_info;
-struct frame_saved_regs;
-struct type;
-struct value;
-#endif
-
-/* Advance PC across any function entry prologue instructions
- to reach some "real" code. */
-
-extern CORE_ADDR m68hc11_skip_prologue ();
-#define SKIP_PROLOGUE(ip) \
- m68hc11_skip_prologue (ip)
-
-
-/* Stack grows downward. */
-
-#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
-/* For a breakpoint, use "test". This is also the breakpoint
- instruction on the 68HC12. */
-#define BREAKPOINT {0x0}
-
-/* If your kernel resets the pc after the trap happens you may need to
- define this before including this file. */
-#define DECR_PC_AFTER_BREAK 0
-
-extern char *m68hc11_register_names[];
-#define REGISTER_NAME(i) m68hc11_register_names[i]
+#include "defs.h"
+#include "frame.h"
+#include "frame-unwind.h"
+#include "frame-base.h"
+#include "dwarf2-frame.h"
+#include "trad-frame.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "gdb_string.h"
+#include "value.h"
+#include "inferior.h"
+#include "dis-asm.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "arch-utils.h"
+#include "regcache.h"
+#include "reggroups.h"
-#define REGISTER_SIZE 2
+#include "target.h"
+#include "opcode/m68hc11.h"
+#include "elf/m68hc11.h"
+#include "elf-bfd.h"
+
+/* Macros for setting and testing a bit in a minimal symbol.
+ For 68HC11/68HC12 we have two flags that tell which return
+ type the function is using. This is used for prologue and frame
+ analysis to compute correct stack frame layout.
+
+ The MSB of the minimal symbol's "info" field is used for this purpose.
+
+ MSYMBOL_SET_RTC Actually sets the "RTC" bit.
+ MSYMBOL_SET_RTI Actually sets the "RTI" bit.
+ MSYMBOL_IS_RTC Tests the "RTC" bit in a minimal symbol.
+ MSYMBOL_IS_RTI Tests the "RTC" bit in a minimal symbol. */
+
+#define MSYMBOL_SET_RTC(msym) \
+ MSYMBOL_INFO (msym) = (char *) (((long) MSYMBOL_INFO (msym)) \
+ | 0x80000000)
+
+#define MSYMBOL_SET_RTI(msym) \
+ MSYMBOL_INFO (msym) = (char *) (((long) MSYMBOL_INFO (msym)) \
+ | 0x40000000)
+
+#define MSYMBOL_IS_RTC(msym) \
+ (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0)
+
+#define MSYMBOL_IS_RTI(msym) \
+ (((long) MSYMBOL_INFO (msym) & 0x40000000) != 0)
+
+enum insn_return_kind {
+ RETURN_RTS,
+ RETURN_RTC,
+ RETURN_RTI
+};
+
/* Register numbers of various important registers.
Note that some of these values are "real" register numbers,
and correspond to the general registers of the machine,
to be actual register numbers as far as the user is concerned
but do serve to get the desired values when passed to read_register. */
-#define X_REGNUM 0
-#define D_REGNUM 1
-#define Y_REGNUM 2
-#define SP_REGNUM 3
-#define PC_REGNUM 4
-#define A_REGNUM 5
-#define B_REGNUM 6
-#define PSW_REGNUM 7
-#define Z_REGNUM 8
-#define FP_REGNUM 9
-#define TMP_REGNUM 10
-#define ZS_REGNUM 11
-#define XY_REGNUM 12
-#define ZD1_REGNUM 13
-#define ZD32_REGNUM (ZD1_REGNUM+31)
-
-#define NUM_REGS (ZD32_REGNUM+1)
-
-#include "opcode/m68hc11.h"
+#define HARD_X_REGNUM 0
+#define HARD_D_REGNUM 1
+#define HARD_Y_REGNUM 2
+#define HARD_SP_REGNUM 3
+#define HARD_PC_REGNUM 4
+
+#define HARD_A_REGNUM 5
+#define HARD_B_REGNUM 6
+#define HARD_CCR_REGNUM 7
+
+/* 68HC12 page number register.
+ Note: to keep a compatibility with gcc register naming, we must
+ not have to rename FP and other soft registers. The page register
+ is a real hard register and must therefore be counted by NUM_REGS.
+ For this it has the same number as Z register (which is not used). */
+#define HARD_PAGE_REGNUM 8
+#define M68HC11_LAST_HARD_REG (HARD_PAGE_REGNUM)
+
+/* Z is replaced by X or Y by gcc during machine reorg.
+ ??? There is no way to get it and even know whether
+ it's in X or Y or in ZS. */
+#define SOFT_Z_REGNUM 8
+
+/* Soft registers. These registers are special. There are treated
+ like normal hard registers by gcc and gdb (ie, within dwarf2 info).
+ They are physically located in memory. */
+#define SOFT_FP_REGNUM 9
+#define SOFT_TMP_REGNUM 10
+#define SOFT_ZS_REGNUM 11
+#define SOFT_XY_REGNUM 12
+#define SOFT_UNUSED_REGNUM 13
+#define SOFT_D1_REGNUM 14
+#define SOFT_D32_REGNUM (SOFT_D1_REGNUM+31)
+#define M68HC11_MAX_SOFT_REGS 32
+
+#define M68HC11_NUM_REGS (8)
+#define M68HC11_NUM_PSEUDO_REGS (M68HC11_MAX_SOFT_REGS+5)
+#define M68HC11_ALL_REGS (M68HC11_NUM_REGS+M68HC11_NUM_PSEUDO_REGS)
+
+#define M68HC11_REG_SIZE (2)
+
+#define M68HC12_NUM_REGS (9)
+#define M68HC12_NUM_PSEUDO_REGS ((M68HC11_MAX_SOFT_REGS+5)+1-1)
+#define M68HC12_HARD_PC_REGNUM (SOFT_D32_REGNUM+1)
+
+struct insn_sequence;
+struct gdbarch_tdep
+ {
+ /* Stack pointer correction value. For 68hc11, the stack pointer points
+ to the next push location. An offset of 1 must be applied to obtain
+ the address where the last value is saved. For 68hc12, the stack
+ pointer points to the last value pushed. No offset is necessary. */
+ int stack_correction;
+
+ /* Description of instructions in the prologue. */
+ struct insn_sequence *prologue;
+
+ /* True if the page memory bank register is available
+ and must be used. */
+ int use_page_register;
+
+ /* ELF flags for ABI. */
+ int elf_flags;
+ };
+
+#define M6811_TDEP gdbarch_tdep (current_gdbarch)
+#define STACK_CORRECTION (M6811_TDEP->stack_correction)
+#define USE_PAGE_REGISTER (M6811_TDEP->use_page_register)
+
+struct m68hc11_unwind_cache
+{
+ /* The previous frame's inner most stack address. Used as this
+ frame ID's stack_addr. */
+ CORE_ADDR prev_sp;
+ /* The frame's base, optionally used by the high-level debug info. */
+ CORE_ADDR base;
+ CORE_ADDR pc;
+ int size;
+ int prologue_type;
+ CORE_ADDR return_pc;
+ CORE_ADDR sp_offset;
+ int frameless;
+ enum insn_return_kind return_kind;
+
+ /* Table indicating the location of each and every register. */
+ struct trad_frame_saved_reg *saved_regs;
+};
-/* Say how much memory is needed to store a copy of the register set */
-#define REGISTER_BYTES ((NUM_REGS)*2)
+/* Table of registers for 68HC11. This includes the hard registers
+ and the soft registers used by GCC. */
+static char *
+m68hc11_register_names[] =
+{
+ "x", "d", "y", "sp", "pc", "a", "b",
+ "ccr", "page", "frame","tmp", "zs", "xy", 0,
+ "d1", "d2", "d3", "d4", "d5", "d6", "d7",
+ "d8", "d9", "d10", "d11", "d12", "d13", "d14",
+ "d15", "d16", "d17", "d18", "d19", "d20", "d21",
+ "d22", "d23", "d24", "d25", "d26", "d27", "d28",
+ "d29", "d30", "d31", "d32"
+};
-/* Index within `registers' of the first byte of the space for
- register N. */
+struct m68hc11_soft_reg
+{
+ const char *name;
+ CORE_ADDR addr;
+};
-#define REGISTER_BYTE(N) ((N) * 2)
+static struct m68hc11_soft_reg soft_regs[M68HC11_ALL_REGS];
-/* Number of bytes of storage in the actual machine representation
- for register N. */
+#define M68HC11_FP_ADDR soft_regs[SOFT_FP_REGNUM].addr
-#define REGISTER_RAW_SIZE(N) (2)
+static int soft_min_addr;
+static int soft_max_addr;
+static int soft_reg_initialized = 0;
-/* Number of bytes of storage in the program's representation
- for register N. */
+/* Look in the symbol table for the address of a pseudo register
+ in memory. If we don't find it, pretend the register is not used
+ and not available. */
+static void
+m68hc11_get_register_info (struct m68hc11_soft_reg *reg, const char *name)
+{
+ struct minimal_symbol *msymbol;
-#define REGISTER_VIRTUAL_SIZE(N) (2)
+ msymbol = lookup_minimal_symbol (name, NULL, NULL);
+ if (msymbol)
+ {
+ reg->addr = SYMBOL_VALUE_ADDRESS (msymbol);
+ reg->name = xstrdup (name);
+
+ /* Keep track of the address range for soft registers. */
+ if (reg->addr < (CORE_ADDR) soft_min_addr)
+ soft_min_addr = reg->addr;
+ if (reg->addr > (CORE_ADDR) soft_max_addr)
+ soft_max_addr = reg->addr;
+ }
+ else
+ {
+ reg->name = 0;
+ reg->addr = 0;
+ }
+}
-/* Largest value REGISTER_RAW_SIZE can have. */
+/* Initialize the table of soft register addresses according
+ to the symbol table. */
+ static void
+m68hc11_initialize_register_info (void)
+{
+ int i;
-#define MAX_REGISTER_RAW_SIZE 8
+ if (soft_reg_initialized)
+ return;
+
+ soft_min_addr = INT_MAX;
+ soft_max_addr = 0;
+ for (i = 0; i < M68HC11_ALL_REGS; i++)
+ {
+ soft_regs[i].name = 0;
+ }
+
+ m68hc11_get_register_info (&soft_regs[SOFT_FP_REGNUM], "_.frame");
+ m68hc11_get_register_info (&soft_regs[SOFT_TMP_REGNUM], "_.tmp");
+ m68hc11_get_register_info (&soft_regs[SOFT_ZS_REGNUM], "_.z");
+ soft_regs[SOFT_Z_REGNUM] = soft_regs[SOFT_ZS_REGNUM];
+ m68hc11_get_register_info (&soft_regs[SOFT_XY_REGNUM], "_.xy");
-/* Largest value REGISTER_VIRTUAL_SIZE can have. */
+ for (i = SOFT_D1_REGNUM; i < M68HC11_MAX_SOFT_REGS; i++)
+ {
+ char buf[10];
-#define MAX_REGISTER_VIRTUAL_SIZE 8
+ sprintf (buf, "_.d%d", i - SOFT_D1_REGNUM + 1);
+ m68hc11_get_register_info (&soft_regs[i], buf);
+ }
-/* Return the GDB type object for the "standard" data type
- of data in register N. */
+ if (soft_regs[SOFT_FP_REGNUM].name == 0)
+ {
+ warning ("No frame soft register found in the symbol table.\n");
+ warning ("Stack backtrace will not work.\n");
+ }
+ soft_reg_initialized = 1;
+}
-#define REGISTER_VIRTUAL_TYPE(N) builtin_type_uint16
+/* Given an address in memory, return the soft register number if
+ that address corresponds to a soft register. Returns -1 if not. */
+static int
+m68hc11_which_soft_register (CORE_ADDR addr)
+{
+ int i;
+
+ if (addr < soft_min_addr || addr > soft_max_addr)
+ return -1;
+
+ for (i = SOFT_FP_REGNUM; i < M68HC11_ALL_REGS; i++)
+ {
+ if (soft_regs[i].name && soft_regs[i].addr == addr)
+ return i;
+ }
+ return -1;
+}
-/* Store the address of the place in which to copy the structure the
- subroutine will return. This is called from call_function.
+/* Fetch a pseudo register. The 68hc11 soft registers are treated like
+ pseudo registers. They are located in memory. Translate the register
+ fetch into a memory read. */
+static void
+m68hc11_pseudo_register_read (struct gdbarch *gdbarch,
+ struct regcache *regcache,
+ int regno, void *buf)
+{
+ /* The PC is a pseudo reg only for 68HC12 with the memory bank
+ addressing mode. */
+ if (regno == M68HC12_HARD_PC_REGNUM)
+ {
+ ULONGEST pc;
+ const int regsize = TYPE_LENGTH (builtin_type_uint32);
- We store structs through a pointer passed in D */
+ regcache_cooked_read_unsigned (regcache, HARD_PC_REGNUM, &pc);
+ if (pc >= 0x8000 && pc < 0xc000)
+ {
+ ULONGEST page;
-#define STORE_STRUCT_RETURN(ADDR, SP) \
- { write_register (D_REGNUM, (ADDR)); }
+ regcache_cooked_read_unsigned (regcache, HARD_PAGE_REGNUM, &page);
+ pc -= 0x8000;
+ pc += (page << 14);
+ pc += 0x1000000;
+ }
+ store_unsigned_integer (buf, regsize, pc);
+ return;
+ }
+ m68hc11_initialize_register_info ();
+
+ /* Fetch a soft register: translate into a memory read. */
+ if (soft_regs[regno].name)
+ {
+ target_read_memory (soft_regs[regno].addr, buf, 2);
+ }
+ else
+ {
+ memset (buf, 0, 2);
+ }
+}
-/* Write into appropriate registers a function return value
- of type TYPE, given in virtual format.
+/* Store a pseudo register. Translate the register store
+ into a memory write. */
+static void
+m68hc11_pseudo_register_write (struct gdbarch *gdbarch,
+ struct regcache *regcache,
+ int regno, const void *buf)
+{
+ /* The PC is a pseudo reg only for 68HC12 with the memory bank
+ addressing mode. */
+ if (regno == M68HC12_HARD_PC_REGNUM)
+ {
+ const int regsize = TYPE_LENGTH (builtin_type_uint32);
+ char *tmp = alloca (regsize);
+ CORE_ADDR pc;
- Things always get returned in D/X */
+ memcpy (tmp, buf, regsize);
+ pc = extract_unsigned_integer (tmp, regsize);
+ if (pc >= 0x1000000)
+ {
+ pc -= 0x1000000;
+ regcache_cooked_write_unsigned (regcache, HARD_PAGE_REGNUM,
+ (pc >> 14) & 0x0ff);
+ pc &= 0x03fff;
+ regcache_cooked_write_unsigned (regcache, HARD_PC_REGNUM,
+ pc + 0x8000);
+ }
+ else
+ regcache_cooked_write_unsigned (regcache, HARD_PC_REGNUM, pc);
+ return;
+ }
+
+ m68hc11_initialize_register_info ();
-#define STORE_RETURN_VALUE(TYPE,VALBUF) \
- write_register_bytes (REGISTER_BYTE (D_REGNUM), VALBUF, TYPE_LENGTH (TYPE))
+ /* Store a soft register: translate into a memory write. */
+ if (soft_regs[regno].name)
+ {
+ const int regsize = 2;
+ char *tmp = alloca (regsize);
+ memcpy (tmp, buf, regsize);
+ target_write_memory (soft_regs[regno].addr, tmp, regsize);
+ }
+}
+static const char *
+m68hc11_register_name (int reg_nr)
+{
+ if (reg_nr == M68HC12_HARD_PC_REGNUM && USE_PAGE_REGISTER)
+ return "pc";
+ if (reg_nr == HARD_PC_REGNUM && USE_PAGE_REGISTER)
+ return "ppc";
+
+ if (reg_nr < 0)
+ return NULL;
+ if (reg_nr >= M68HC11_ALL_REGS)
+ return NULL;
+
+ /* If we don't know the address of a soft register, pretend it
+ does not exist. */
+ if (reg_nr > M68HC11_LAST_HARD_REG && soft_regs[reg_nr].name == 0)
+ return NULL;
+ return m68hc11_register_names[reg_nr];
+}
-/* Extract from an array REGBUF containing the (raw) register state
- the address in which a function should return its structure value,
- as a CORE_ADDR (or an expression that can be used as one). */
+static const unsigned char *
+m68hc11_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
+{
+ static unsigned char breakpoint[] = {0x0};
+
+ *lenptr = sizeof (breakpoint);
+ return breakpoint;
+}
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
\f
+/* 68HC11 & 68HC12 prologue analysis.
+
+ */
+#define MAX_CODES 12
+
+/* 68HC11 opcodes. */
+#undef M6811_OP_PAGE2
+#define M6811_OP_PAGE2 (0x18)
+#define M6811_OP_LDX (0xde)
+#define M6811_OP_LDX_EXT (0xfe)
+#define M6811_OP_PSHX (0x3c)
+#define M6811_OP_STS (0x9f)
+#define M6811_OP_STS_EXT (0xbf)
+#define M6811_OP_TSX (0x30)
+#define M6811_OP_XGDX (0x8f)
+#define M6811_OP_ADDD (0xc3)
+#define M6811_OP_TXS (0x35)
+#define M6811_OP_DES (0x34)
+
+/* 68HC12 opcodes. */
+#define M6812_OP_PAGE2 (0x18)
+#define M6812_OP_MOVW (0x01)
+#define M6812_PB_PSHW (0xae)
+#define M6812_OP_STS (0x5f)
+#define M6812_OP_STS_EXT (0x7f)
+#define M6812_OP_LEAS (0x1b)
+#define M6812_OP_PSHX (0x34)
+#define M6812_OP_PSHY (0x35)
+
+/* Operand extraction. */
+#define OP_DIRECT (0x100) /* 8-byte direct addressing. */
+#define OP_IMM_LOW (0x200) /* Low part of 16-bit constant/address. */
+#define OP_IMM_HIGH (0x300) /* High part of 16-bit constant/address. */
+#define OP_PBYTE (0x400) /* 68HC12 indexed operand. */
+
+/* Identification of the sequence. */
+enum m6811_seq_type
+{
+ P_LAST = 0,
+ P_SAVE_REG, /* Save a register on the stack. */
+ P_SET_FRAME, /* Setup the frame pointer. */
+ P_LOCAL_1, /* Allocate 1 byte for locals. */
+ P_LOCAL_2, /* Allocate 2 bytes for locals. */
+ P_LOCAL_N /* Allocate N bytes for locals. */
+};
-/* Define other aspects of the stack frame.
- we keep a copy of the worked out return pc lying around, since it
- is a useful bit of info */
-
-#define EXTRA_FRAME_INFO \
- int frame_reg; \
- CORE_ADDR return_pc; \
- CORE_ADDR dummy; \
- int frameless; \
- int size;
-
-/* There's a mess in stack frame creation. See comments in blockframe.c
- near reference to INIT_FRAME_PC_FIRST. */
-
-#define INIT_FRAME_PC(fromleaf, prev) /* nada */
-
-#define INIT_FRAME_PC_FIRST(fromleaf, prev) \
- (prev)->pc = ((fromleaf) ? SAVED_PC_AFTER_CALL ((prev)->next) : \
- (prev)->next ? FRAME_SAVED_PC ((prev)->next) : read_pc ());
-
-#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
- m68hc11_init_extra_frame_info (fromleaf, fi)
-
-extern void m68hc11_init_extra_frame_info (int fromleaf,
- struct frame_info * fi);
-
-/* A macro that tells us whether the function invocation represented
- by FI does not have a frame on the stack associated with it. If it
- does not, FRAMELESS is set to 1, else 0. */
-
-#define FRAMELESS_FUNCTION_INVOCATION(FI) \
- frameless_look_for_prologue (FI)
-
-#define FRAME_CHAIN(FRAME) m68hc11_frame_chain (FRAME)
-#define FRAME_CHAIN_VALID(chain,frame) \
- ((chain) != 0 && (frame) != 0)
-#define FRAME_SAVED_PC(FRAME) ((FRAME)->return_pc)
-#define FRAME_ARGS_ADDRESS(fi) (fi)->frame
-#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
-
-#define SAVED_PC_AFTER_CALL(frame) m68hc11_saved_pc_after_call (frame)
-
-/* Set VAL to the number of args passed to frame described by FI.
- Can set VAL to -1, meaning no way to tell. */
-/* We can't tell how many args there are */
-
-#define FRAME_NUM_ARGS(fi) (-1)
-
-/* Return number of bytes at start of arglist that are not really args. */
-
-#define FRAME_ARGS_SKIP 0
-
-
-/* Put here the code to store, into a struct frame_saved_regs,
- the addresses of the saved registers of frame described by FRAME_INFO.
- This includes special registers such as pc and fp saved in special
- ways in the stack frame. sp is even more special:
- the address we return for it IS the sp for the next frame. */
-
-#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
- m68hc11_frame_find_saved_regs (frame_info, &(frame_saved_regs))
-
-extern void m68hc11_frame_find_saved_regs (struct frame_info *,
- struct frame_saved_regs *);
-
-#define CALL_DUMMY { 0 }
-#define PUSH_DUMMY_FRAME
-#define CALL_DUMMY_START_OFFSET 0
-#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
-
-extern CORE_ADDR m68hc11_call_dummy_address (void);
-#define CALL_DUMMY_ADDRESS() m68hc11_call_dummy_address ()
-
-#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
-sp = m68hc11_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
-
-extern CORE_ADDR m68hc11_fix_call_dummy (char *, CORE_ADDR, CORE_ADDR,
- int, struct value **,
- struct type *, int);
-#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
- sp = m68hc11_push_arguments ((nargs), (args), (sp), \
- (struct_return), (struct_addr))
-extern CORE_ADDR m68hc11_push_arguments (int, struct value **,
- CORE_ADDR, int, CORE_ADDR);
-
-
-/* Extract from an array REGBUF containing the (raw) register state
- a function return value of type TYPE, and copy that, in virtual format,
- into VALBUF. */
-
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
-m68hc11_extract_return_value(TYPE, REGBUF, VALBUF)
-extern void m68hc11_extract_return_value (struct type *, char *, char *);
-
-
-/* Discard from the stack the innermost frame,
- restoring all saved registers. */
-#define POP_FRAME m68hc11_pop_frame();
-extern void m68hc11_pop_frame (void);
-
-
-/* Number of bits in the appropriate type. */
-
-#define TARGET_INT_BIT (2 * TARGET_CHAR_BIT)
-#define TARGET_PTR_BIT (2 * TARGET_CHAR_BIT)
-#define TARGET_DOUBLE_BIT (4 * TARGET_CHAR_BIT)
-#define TARGET_LONG_DOUBLE_BIT (8 * TARGET_CHAR_BIT)
-
-#endif
-
-#include "defs.h"
-#include "frame.h"
-#include "obstack.h"
-#include "symtab.h"
-#include "gdbtypes.h"
-#include "gdbcmd.h"
-#include "gdbcore.h"
-#include "gdb_string.h"
-#include "value.h"
-#include "inferior.h"
-#include "dis-asm.h"
-#include "symfile.h"
-#include "objfiles.h"
-
-/* NOTE: This port is not finished. Several operations are not implemented
- and will raise an error. Most of these functions concern the calling
- of a function by GDB itself (command 'call') and retrieving data pushed
- on the stack. */
-
-void m68hc11_frame_find_saved_regs (struct frame_info *fi,
- struct frame_saved_regs *fsr);
-static void m68hc11_pop_dummy_frame (struct frame_info *fi);
+struct insn_sequence {
+ enum m6811_seq_type type;
+ unsigned length;
+ unsigned short code[MAX_CODES];
+};
-/* Table of registers for 68HC11. This includes the hard registers
- and the pseudo hard registers used by GCC. */
-char*
-m68hc11_register_names[] =
-{
- "x", "d", "y", "sp", "pc", "a", "b",
- "ccr", "z", "frame","tmp", "zs", "xy",
- "ZD1", "ZD2", "ZD3", "ZD4", "ZD5", "ZD6", "ZD7",
- "ZD8", "ZD9", "ZD10", "ZD11", "ZD12", "ZD13", "ZD14",
- "ZD15", "ZD16", "ZD17", "ZD18", "ZD19", "ZD20", "ZD21",
- "ZD22", "ZD23", "ZD24", "ZD25", "ZD26", "ZD27", "ZD28",
- "ZD29", "ZD30", "ZD31", "ZD32"
+/* Sequence of instructions in the 68HC11 function prologue. */
+static struct insn_sequence m6811_prologue[] = {
+ /* Sequences to save a soft-register. */
+ { P_SAVE_REG, 3, { M6811_OP_LDX, OP_DIRECT,
+ M6811_OP_PSHX } },
+ { P_SAVE_REG, 5, { M6811_OP_PAGE2, M6811_OP_LDX, OP_DIRECT,
+ M6811_OP_PAGE2, M6811_OP_PSHX } },
+ { P_SAVE_REG, 4, { M6811_OP_LDX_EXT, OP_IMM_HIGH, OP_IMM_LOW,
+ M6811_OP_PSHX } },
+ { P_SAVE_REG, 6, { M6811_OP_PAGE2, M6811_OP_LDX_EXT, OP_IMM_HIGH, OP_IMM_LOW,
+ M6811_OP_PAGE2, M6811_OP_PSHX } },
+
+ /* Sequences to allocate local variables. */
+ { P_LOCAL_N, 7, { M6811_OP_TSX,
+ M6811_OP_XGDX,
+ M6811_OP_ADDD, OP_IMM_HIGH, OP_IMM_LOW,
+ M6811_OP_XGDX,
+ M6811_OP_TXS } },
+ { P_LOCAL_N, 11, { M6811_OP_PAGE2, M6811_OP_TSX,
+ M6811_OP_PAGE2, M6811_OP_XGDX,
+ M6811_OP_ADDD, OP_IMM_HIGH, OP_IMM_LOW,
+ M6811_OP_PAGE2, M6811_OP_XGDX,
+ M6811_OP_PAGE2, M6811_OP_TXS } },
+ { P_LOCAL_1, 1, { M6811_OP_DES } },
+ { P_LOCAL_2, 1, { M6811_OP_PSHX } },
+ { P_LOCAL_2, 2, { M6811_OP_PAGE2, M6811_OP_PSHX } },
+
+ /* Initialize the frame pointer. */
+ { P_SET_FRAME, 2, { M6811_OP_STS, OP_DIRECT } },
+ { P_SET_FRAME, 3, { M6811_OP_STS_EXT, OP_IMM_HIGH, OP_IMM_LOW } },
+ { P_LAST, 0, { 0 } }
};
-static int reg_last = 32 * 2 + 6;
-static int frame_index = 6;
-/* Raise an error for operations which are not yet provided. */
-static void
-m68hc11_not_yet (const char *operation)
-{
- error ("Operation '%s' is not yet implemented\n", operation);
-}
+/* Sequence of instructions in the 68HC12 function prologue. */
+static struct insn_sequence m6812_prologue[] = {
+ { P_SAVE_REG, 5, { M6812_OP_PAGE2, M6812_OP_MOVW, M6812_PB_PSHW,
+ OP_IMM_HIGH, OP_IMM_LOW } },
+ { P_SET_FRAME, 2, { M6812_OP_STS, OP_DIRECT } },
+ { P_SET_FRAME, 3, { M6812_OP_STS_EXT, OP_IMM_HIGH, OP_IMM_LOW } },
+ { P_LOCAL_N, 2, { M6812_OP_LEAS, OP_PBYTE } },
+ { P_LOCAL_2, 1, { M6812_OP_PSHX } },
+ { P_LOCAL_2, 1, { M6812_OP_PSHY } },
+ { P_LAST, 0 }
+};
-/* Immediately after a function call, return the saved pc before the frame
- is setup. For sun3's, we check for the common case of being inside of a
- system call, and if so, we know that Sun pushes the call # on the stack
- prior to doing the trap. */
-CORE_ADDR
-m68hc11_saved_pc_after_call (struct frame_info *frame)
+/* Analyze the sequence of instructions starting at the given address.
+ Returns a pointer to the sequence when it is recognized and
+ the optional value (constant/address) associated with it. */
+static struct insn_sequence *
+m68hc11_analyze_instruction (struct insn_sequence *seq, CORE_ADDR pc,
+ CORE_ADDR *val)
{
- unsigned addr = frame->frame + 1 + 2;
+ unsigned char buffer[MAX_CODES];
+ unsigned bufsize;
+ unsigned j;
+ CORE_ADDR cur_val;
+ short v = 0;
+
+ bufsize = 0;
+ for (; seq->type != P_LAST; seq++)
+ {
+ cur_val = 0;
+ for (j = 0; j < seq->length; j++)
+ {
+ if (bufsize < j + 1)
+ {
+ buffer[bufsize] = read_memory_unsigned_integer (pc + bufsize,
+ 1);
+ bufsize++;
+ }
+ /* Continue while we match the opcode. */
+ if (seq->code[j] == buffer[j])
+ continue;
+
+ if ((seq->code[j] & 0xf00) == 0)
+ break;
+
+ /* Extract a sequence parameter (address or constant). */
+ switch (seq->code[j])
+ {
+ case OP_DIRECT:
+ cur_val = (CORE_ADDR) buffer[j];
+ break;
+
+ case OP_IMM_HIGH:
+ cur_val = cur_val & 0x0ff;
+ cur_val |= (buffer[j] << 8);
+ break;
+
+ case OP_IMM_LOW:
+ cur_val &= 0x0ff00;
+ cur_val |= buffer[j];
+ break;
+
+ case OP_PBYTE:
+ if ((buffer[j] & 0xE0) == 0x80)
+ {
+ v = buffer[j] & 0x1f;
+ if (v & 0x10)
+ v |= 0xfff0;
+ }
+ else if ((buffer[j] & 0xfe) == 0xf0)
+ {
+ v = read_memory_unsigned_integer (pc + j + 1, 1);
+ if (buffer[j] & 1)
+ v |= 0xff00;
+ }
+ else if (buffer[j] == 0xf2)
+ {
+ v = read_memory_unsigned_integer (pc + j + 1, 2);
+ }
+ cur_val = v;
+ break;
+ }
+ }
- addr = read_register (SP_REGNUM) + 1;
- addr &= 0x0ffff;
- return read_memory_integer (addr, 2) & 0x0FFFF;
+ /* We have a full match. */
+ if (j == seq->length)
+ {
+ *val = cur_val;
+ return seq;
+ }
+ }
+ return 0;
}
-/* Discard from the stack the innermost frame, restoring all saved
- registers. */
-
-void
-m68hc11_pop_frame (void)
+/* Return the instruction that the function at the PC is using. */
+static enum insn_return_kind
+m68hc11_get_return_insn (CORE_ADDR pc)
{
- m68hc11_not_yet ("m68hc11_pop_frame");
+ struct minimal_symbol *sym;
+
+ /* A flag indicating that this is a STO_M68HC12_FAR or STO_M68HC12_INTERRUPT
+ function is stored by elfread.c in the high bit of the info field.
+ Use this to decide which instruction the function uses to return. */
+ sym = lookup_minimal_symbol_by_pc (pc);
+ if (sym == 0)
+ return RETURN_RTS;
+
+ if (MSYMBOL_IS_RTC (sym))
+ return RETURN_RTC;
+ else if (MSYMBOL_IS_RTI (sym))
+ return RETURN_RTI;
+ else
+ return RETURN_RTS;
}
/* Analyze the function prologue to find some information
- the PC of the first line (for m68hc11_skip_prologue)
- the offset of the previous frame saved address (from current frame)
- the soft registers which are pushed. */
-static void
-m68hc11_guess_from_prologue (CORE_ADDR pc, CORE_ADDR* first_line,
- int* frame_offset, int* pushed_regs)
+static CORE_ADDR
+m68hc11_scan_prologue (CORE_ADDR pc, CORE_ADDR current_pc,
+ struct m68hc11_unwind_cache *info)
{
+ LONGEST save_addr;
CORE_ADDR func_end;
- unsigned char op0, op1, op2;
- int add_sp_mode;
- int sp_adjust;
int size;
int found_frame_point;
- int found_load;
- CORE_ADDR first_pc;
- int reg_saved;
-
- first_pc = get_pc_function_start (pc);
+ int saved_reg;
+ int done = 0;
+ struct insn_sequence *seq_table;
+
+ info->size = 0;
+ info->sp_offset = 0;
+ if (pc >= current_pc)
+ return current_pc;
+
size = 0;
- if (first_pc == 0)
+ m68hc11_initialize_register_info ();
+ if (pc == 0)
{
- *frame_offset = 0;
- *pushed_regs = 0;
- *first_line = pc;
- return;
+ info->size = 0;
+ return pc;
}
-#define OP_PAGE2 (0x18)
-#define OP_LDX (0xde)
-#define OP_LDY (0xde)
-#define OP_PSHX (0x3c)
-#define OP_PSHY (0x3c)
-#define OP_STS (0x9f)
-#define OP_TSX (0x30)
-#define OP_TSY (0x30)
-#define OP_XGDX (0x8f)
-#define OP_XGDY (0x8f)
-#define OP_ADDD (0xc3)
-#define OP_TXS (0x35)
-#define OP_TYS (0x35)
-
+ seq_table = gdbarch_tdep (current_gdbarch)->prologue;
+
/* The 68hc11 stack is as follows:
we find an instruction which is not supposed to appear in the
prologue (as generated by gcc 2.95, 2.96).
*/
- pc = first_pc;
func_end = pc + 128;
- add_sp_mode = 0;
found_frame_point = 0;
- while (pc + 2 < func_end)
+ info->size = 0;
+ save_addr = 0;
+ while (!done && pc + 2 < func_end)
{
- op0 = read_memory_unsigned_integer (pc, 1);
- op1 = read_memory_unsigned_integer (pc + 1, 1);
- op2 = read_memory_unsigned_integer (pc + 2, 1);
-
- /* ldx *frame */
- if (op0 == OP_LDX && op1 == frame_index)
- {
- pc += 2;
- }
+ struct insn_sequence *seq;
+ CORE_ADDR val;
- /* ldy *frame */
- else if (op0 == OP_PAGE2 && op1 == OP_LDY && op2 == frame_index)
- {
- pc += 3;
- }
+ seq = m68hc11_analyze_instruction (seq_table, pc, &val);
+ if (seq == 0)
+ break;
- /* pshx */
- else if (op0 == OP_PSHX)
- {
- pc += 1;
- size += 2;
- }
+ /* If we are within the instruction group, we can't advance the
+ pc nor the stack offset. Otherwise the caller's stack computed
+ from the current stack can be wrong. */
+ if (pc + seq->length > current_pc)
+ break;
- /* pshy */
- else if (op0 == OP_PAGE2 && op1 == OP_PSHX)
+ pc = pc + seq->length;
+ if (seq->type == P_SAVE_REG)
{
- pc += 2;
- size += 2;
+ if (found_frame_point)
+ {
+ saved_reg = m68hc11_which_soft_register (val);
+ if (saved_reg < 0)
+ break;
+
+ save_addr -= 2;
+ info->saved_regs[saved_reg].addr = save_addr;
+ }
+ else
+ {
+ size += 2;
+ }
}
-
- /* sts *frame */
- else if (op0 == OP_STS && op1 == frame_index)
+ else if (seq->type == P_SET_FRAME)
{
found_frame_point = 1;
- pc += 2;
- break;
+ info->size = size;
}
- else if (op0 == OP_TSX && op1 == OP_XGDX)
+ else if (seq->type == P_LOCAL_1)
{
- add_sp_mode = 1;
- pc += 2;
- }
- else if (op0 == OP_PAGE2 && op1 == OP_TSY && op2 == OP_PAGE2)
- {
- op0 = read_memory_unsigned_integer (pc + 3, 1);
- if (op0 != OP_XGDY)
- break;
-
- add_sp_mode = 2;
- pc += 4;
+ size += 1;
}
- else if (add_sp_mode && op0 == OP_ADDD)
+ else if (seq->type == P_LOCAL_2)
{
- sp_adjust = read_memory_unsigned_integer (pc + 1, 2);
- if (sp_adjust & 0x8000)
- sp_adjust |= 0xffff0000L;
-
- sp_adjust = -sp_adjust;
- add_sp_mode |= 4;
- pc += 3;
- }
- else if (add_sp_mode == (1 | 4) && op0 == OP_XGDX
- && op1 == OP_TXS)
- {
- size += sp_adjust;
- pc += 2;
- add_sp_mode = 0;
- }
- else if (add_sp_mode == (2 | 4) && op0 == OP_PAGE2
- && op1 == OP_XGDY && op2 == OP_PAGE2)
- {
- op0 = read_memory_unsigned_integer (pc + 3, 1);
- if (op0 != OP_TYS)
- break;
-
- size += sp_adjust;
- pc += 4;
- add_sp_mode = 0;
+ size += 2;
}
- else
+ else if (seq->type == P_LOCAL_N)
{
- break;
+ /* Stack pointer is decremented for the allocation. */
+ if (val & 0x8000)
+ size -= (int) (val) | 0xffff0000;
+ else
+ size -= val;
}
}
-
if (found_frame_point == 0)
- {
- *frame_offset = 0;
- }
+ info->sp_offset = size;
else
- {
- *frame_offset = size;
- }
-
- /* Now, look forward to see how many registers are pushed on the stack.
- We look only for soft registers so there must be a first LDX *REG
- before a PSHX. */
- reg_saved = 0;
- found_load = 0;
- while (pc + 2 < func_end)
- {
- op0 = read_memory_unsigned_integer (pc, 1);
- op1 = read_memory_unsigned_integer (pc + 1, 1);
- op2 = read_memory_unsigned_integer (pc + 2, 1);
- if (op0 == OP_LDX && op1 > frame_index && op1 <= reg_last)
- {
- found_load = 1;
- pc += 2;
- }
- else if (op0 == OP_PAGE2 && op1 == OP_LDY
- && op2 > frame_index && op2 < reg_last)
- {
- found_load = 1;
- pc += 3;
- }
- else if (op0 == OP_PSHX)
- {
- /* If there was no load, this is a push for a function call. */
- if (found_load == 0)
- break;
-
- reg_saved += 2;
- pc += 1;
- found_load = 0;
- }
- else if (op0 == OP_PAGE2 && op1 == OP_PSHY)
- {
- if (found_load == 0)
- break;
-
- reg_saved += 2;
- pc += 2;
- found_load = 0;
- }
- else
- {
- break;
- }
- }
- *pushed_regs = reg_saved;
- *first_line = pc;
+ info->sp_offset = -1;
+ return pc;
}
-
-CORE_ADDR
+static CORE_ADDR
m68hc11_skip_prologue (CORE_ADDR pc)
{
CORE_ADDR func_addr, func_end;
struct symtab_and_line sal;
- int frame_offset;
- int pushed_args;
+ struct m68hc11_unwind_cache tmp_cache = { 0 };
- /* If we have line debugging information, then the end of the. */
- /* prologue should be the first assembly instruction of the
+ /* If we have line debugging information, then the end of the
+ prologue should be the first assembly instruction of the
first source line. */
if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
{
return sal.end;
}
- m68hc11_guess_from_prologue (pc, &pc, &frame_offset, &pushed_args);
+ pc = m68hc11_scan_prologue (pc, (CORE_ADDR) -1, &tmp_cache);
return pc;
}
-/* Given a GDB frame, determine the address of the calling function's frame.
- This will be used to create a new GDB frame struct, and then
- INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
-*/
+static CORE_ADDR
+m68hc11_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ ULONGEST pc;
-CORE_ADDR
-m68hc11_frame_chain (struct frame_info *frame)
+ frame_unwind_unsigned_register (next_frame, gdbarch_pc_regnum (gdbarch),
+ &pc);
+ return pc;
+}
+
+/* Put here the code to store, into fi->saved_regs, the addresses of
+ the saved registers of frame described by FRAME_INFO. This
+ includes special registers such as pc and fp saved in special ways
+ in the stack frame. sp is even more special: the address we return
+ for it IS the sp for the next frame. */
+
+struct m68hc11_unwind_cache *
+m68hc11_frame_unwind_cache (struct frame_info *next_frame,
+ void **this_prologue_cache)
{
- unsigned addr;
+ ULONGEST prev_sp;
+ ULONGEST this_base;
+ struct m68hc11_unwind_cache *info;
+ CORE_ADDR current_pc;
+ int i;
+
+ if ((*this_prologue_cache))
+ return (*this_prologue_cache);
+
+ info = FRAME_OBSTACK_ZALLOC (struct m68hc11_unwind_cache);
+ (*this_prologue_cache) = info;
+ info->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+
+ info->pc = frame_func_unwind (next_frame);
- if (frame->return_pc == 0 || inside_entry_file(frame->return_pc))
- return (CORE_ADDR)0;
+ info->size = 0;
+ info->return_kind = m68hc11_get_return_insn (info->pc);
- if (frame->frame == 0)
+ /* The SP was moved to the FP. This indicates that a new frame
+ was created. Get THIS frame's FP value by unwinding it from
+ the next frame. */
+ frame_unwind_unsigned_register (next_frame, SOFT_FP_REGNUM, &this_base);
+ if (this_base == 0)
{
- return (CORE_ADDR) 0;
+ info->base = 0;
+ return info;
}
- addr = frame->frame + frame->size + 1 - 2;
- addr = read_memory_unsigned_integer (addr, 2) & 0x0FFFF;
- if (addr == 0)
+ current_pc = frame_pc_unwind (next_frame);
+ if (info->pc != 0)
+ m68hc11_scan_prologue (info->pc, current_pc, info);
+
+ info->saved_regs[HARD_PC_REGNUM].addr = info->size;
+
+ if (info->sp_offset != (CORE_ADDR) -1)
+ {
+ info->saved_regs[HARD_PC_REGNUM].addr = info->sp_offset;
+ frame_unwind_unsigned_register (next_frame, HARD_SP_REGNUM, &this_base);
+ prev_sp = this_base + info->sp_offset + 2;
+ this_base += STACK_CORRECTION;
+ }
+ else
+ {
+ /* The FP points at the last saved register. Adjust the FP back
+ to before the first saved register giving the SP. */
+ prev_sp = this_base + info->size + 2;
+
+ this_base += STACK_CORRECTION;
+ if (soft_regs[SOFT_FP_REGNUM].name)
+ info->saved_regs[SOFT_FP_REGNUM].addr = info->size - 2;
+ }
+
+ if (info->return_kind == RETURN_RTC)
+ {
+ prev_sp += 1;
+ info->saved_regs[HARD_PAGE_REGNUM].addr = info->size;
+ info->saved_regs[HARD_PC_REGNUM].addr = info->size + 1;
+ }
+ else if (info->return_kind == RETURN_RTI)
{
- return (CORE_ADDR)0;
+ prev_sp += 7;
+ info->saved_regs[HARD_CCR_REGNUM].addr = info->size;
+ info->saved_regs[HARD_D_REGNUM].addr = info->size + 1;
+ info->saved_regs[HARD_X_REGNUM].addr = info->size + 3;
+ info->saved_regs[HARD_Y_REGNUM].addr = info->size + 5;
+ info->saved_regs[HARD_PC_REGNUM].addr = info->size + 7;
}
-
+
+ /* Add 1 here to adjust for the post-decrement nature of the push
+ instruction.*/
+ info->prev_sp = prev_sp;
+
+ info->base = this_base;
+
+ /* Adjust all the saved registers so that they contain addresses and not
+ offsets. */
+ for (i = 0; i < NUM_REGS + NUM_PSEUDO_REGS - 1; i++)
+ if (trad_frame_addr_p (info->saved_regs, i))
+ {
+ info->saved_regs[i].addr += this_base;
+ }
+
+ /* The previous frame's SP needed to be computed. Save the computed
+ value. */
+ trad_frame_set_value (info->saved_regs, HARD_SP_REGNUM, info->prev_sp);
+
+ return info;
+}
+
+/* Given a GDB frame, determine the address of the calling function's
+ frame. This will be used to create a new GDB frame struct. */
+
+static void
+m68hc11_frame_this_id (struct frame_info *next_frame,
+ void **this_prologue_cache,
+ struct frame_id *this_id)
+{
+ struct m68hc11_unwind_cache *info
+ = m68hc11_frame_unwind_cache (next_frame, this_prologue_cache);
+ CORE_ADDR base;
+ CORE_ADDR func;
+ struct frame_id id;
+
+ /* The FUNC is easy. */
+ func = frame_func_unwind (next_frame);
+
+ /* Hopefully the prologue analysis either correctly determined the
+ frame's base (which is the SP from the previous frame), or set
+ that base to "NULL". */
+ base = info->prev_sp;
+ if (base == 0)
+ return;
+
+ id = frame_id_build (base, func);
+#if 0
+ /* Check that we're not going round in circles with the same frame
+ ID (but avoid applying the test to sentinel frames which do go
+ round in circles). Can't use frame_id_eq() as that doesn't yet
+ compare the frame's PC value. */
+ if (frame_relative_level (next_frame) >= 0
+ && get_frame_type (next_frame) != DUMMY_FRAME
+ && frame_id_eq (get_frame_id (next_frame), id))
+ return;
+#endif
+ (*this_id) = id;
+}
+
+static void
+m68hc11_frame_prev_register (struct frame_info *next_frame,
+ void **this_prologue_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *bufferp)
+{
+ struct m68hc11_unwind_cache *info
+ = m68hc11_frame_unwind_cache (next_frame, this_prologue_cache);
+
+ trad_frame_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, bufferp);
+
+ if (regnum == HARD_PC_REGNUM)
+ {
+ /* Take into account the 68HC12 specific call (PC + page). */
+ if (info->return_kind == RETURN_RTC
+ && *addrp >= 0x08000 && *addrp < 0x0c000
+ && USE_PAGE_REGISTER)
+ {
+ int page_optimized;
+
+ CORE_ADDR page;
+
+ trad_frame_prev_register (next_frame, info->saved_regs,
+ HARD_PAGE_REGNUM, &page_optimized,
+ 0, &page, 0, 0);
+ *addrp -= 0x08000;
+ *addrp += ((page & 0x0ff) << 14);
+ *addrp += 0x1000000;
+ }
+ }
+}
+
+static const struct frame_unwind m68hc11_frame_unwind = {
+ NORMAL_FRAME,
+ m68hc11_frame_this_id,
+ m68hc11_frame_prev_register
+};
+
+const struct frame_unwind *
+m68hc11_frame_sniffer (struct frame_info *next_frame)
+{
+ return &m68hc11_frame_unwind;
+}
+
+static CORE_ADDR
+m68hc11_frame_base_address (struct frame_info *next_frame, void **this_cache)
+{
+ struct m68hc11_unwind_cache *info
+ = m68hc11_frame_unwind_cache (next_frame, this_cache);
+
+ return info->base;
+}
+
+static CORE_ADDR
+m68hc11_frame_args_address (struct frame_info *next_frame, void **this_cache)
+{
+ CORE_ADDR addr;
+ struct m68hc11_unwind_cache *info
+ = m68hc11_frame_unwind_cache (next_frame, this_cache);
+
+ addr = info->base + info->size;
+ if (info->return_kind == RETURN_RTC)
+ addr += 1;
+ else if (info->return_kind == RETURN_RTI)
+ addr += 7;
+
return addr;
-}
+}
-/* Put here the code to store, into a struct frame_saved_regs, the
- addresses of the saved registers of frame described by FRAME_INFO.
- This includes special registers such as pc and fp saved in special
- ways in the stack frame. sp is even more special: the address we
- return for it IS the sp for the next frame. */
-void
-m68hc11_frame_find_saved_regs (struct frame_info *fi,
- struct frame_saved_regs *fsr)
+static const struct frame_base m68hc11_frame_base = {
+ &m68hc11_frame_unwind,
+ m68hc11_frame_base_address,
+ m68hc11_frame_base_address,
+ m68hc11_frame_args_address
+};
+
+static CORE_ADDR
+m68hc11_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- CORE_ADDR pc;
- int saved;
-
- pc = fi->pc;
- memset (fsr, 0, sizeof (*fsr));
- m68hc11_guess_from_prologue (pc, &pc, &fi->size, &saved);
+ ULONGEST sp;
+ frame_unwind_unsigned_register (next_frame, HARD_SP_REGNUM, &sp);
+ return sp;
}
-void
-m68hc11_init_extra_frame_info (int fromleaf, struct frame_info *fi)
+/* Assuming NEXT_FRAME->prev is a dummy, return the frame ID of that
+ dummy frame. The frame ID's base needs to match the TOS value
+ saved by save_dummy_frame_tos(), and the PC match the dummy frame's
+ breakpoint. */
+
+static struct frame_id
+m68hc11_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- unsigned addr;
- struct frame_saved_regs dummy;
+ ULONGEST tos;
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
- m68hc11_frame_find_saved_regs (fi, &dummy);
+ frame_unwind_unsigned_register (next_frame, SOFT_FP_REGNUM, &tos);
+ tos += 2;
+ return frame_id_build (tos, pc);
+}
- if (fromleaf)
+\f
+/* Get and print the register from the given frame. */
+static void
+m68hc11_print_register (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, int regno)
+{
+ LONGEST rval;
+
+ if (regno == HARD_PC_REGNUM || regno == HARD_SP_REGNUM
+ || regno == SOFT_FP_REGNUM || regno == M68HC12_HARD_PC_REGNUM)
+ rval = get_frame_register_unsigned (frame, regno);
+ else
+ rval = get_frame_register_signed (frame, regno);
+
+ if (regno == HARD_A_REGNUM || regno == HARD_B_REGNUM
+ || regno == HARD_CCR_REGNUM || regno == HARD_PAGE_REGNUM)
{
- fi->return_pc = m68hc11_saved_pc_after_call (fi);
+ fprintf_filtered (file, "0x%02x ", (unsigned char) rval);
+ if (regno != HARD_CCR_REGNUM)
+ print_longest (file, 'd', 1, rval);
}
else
{
- addr = fi->frame + fi->size + 1;
- fi->return_pc = read_memory_unsigned_integer (addr, 2) & 0x0ffff;
+ if (regno == HARD_PC_REGNUM && gdbarch_tdep (gdbarch)->use_page_register)
+ {
+ ULONGEST page;
-#if 0
- printf ("Pc@0x%04x, FR 0x%04x, size %d, read ret @0x%04x -> 0x%04x\n",
- fi->pc,
- fi->frame, fi->size,
- addr & 0x0ffff,
- fi->return_pc);
-#endif
+ page = get_frame_register_unsigned (frame, HARD_PAGE_REGNUM);
+ fprintf_filtered (file, "0x%02x:%04x ", (unsigned) page,
+ (unsigned) rval);
+ }
+ else
+ {
+ fprintf_filtered (file, "0x%04x ", (unsigned) rval);
+ if (regno != HARD_PC_REGNUM && regno != HARD_SP_REGNUM
+ && regno != SOFT_FP_REGNUM && regno != M68HC12_HARD_PC_REGNUM)
+ print_longest (file, 'd', 1, rval);
+ }
+ }
+
+ if (regno == HARD_CCR_REGNUM)
+ {
+ /* CCR register */
+ int C, Z, N, V;
+ unsigned char l = rval & 0xff;
+
+ fprintf_filtered (file, "%c%c%c%c%c%c%c%c ",
+ l & M6811_S_BIT ? 'S' : '-',
+ l & M6811_X_BIT ? 'X' : '-',
+ l & M6811_H_BIT ? 'H' : '-',
+ l & M6811_I_BIT ? 'I' : '-',
+ l & M6811_N_BIT ? 'N' : '-',
+ l & M6811_Z_BIT ? 'Z' : '-',
+ l & M6811_V_BIT ? 'V' : '-',
+ l & M6811_C_BIT ? 'C' : '-');
+ N = (l & M6811_N_BIT) != 0;
+ Z = (l & M6811_Z_BIT) != 0;
+ V = (l & M6811_V_BIT) != 0;
+ C = (l & M6811_C_BIT) != 0;
+
+ /* Print flags following the h8300 */
+ if ((C | Z) == 0)
+ fprintf_filtered (file, "u> ");
+ else if ((C | Z) == 1)
+ fprintf_filtered (file, "u<= ");
+ else if (C == 0)
+ fprintf_filtered (file, "u< ");
+
+ if (Z == 0)
+ fprintf_filtered (file, "!= ");
+ else
+ fprintf_filtered (file, "== ");
+
+ if ((N ^ V) == 0)
+ fprintf_filtered (file, ">= ");
+ else
+ fprintf_filtered (file, "< ");
+
+ if ((Z | (N ^ V)) == 0)
+ fprintf_filtered (file, "> ");
+ else
+ fprintf_filtered (file, "<= ");
+ }
+}
+
+/* Same as 'info reg' but prints the registers in a different way. */
+static void
+m68hc11_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, int regno, int cpregs)
+{
+ if (regno >= 0)
+ {
+ const char *name = gdbarch_register_name (gdbarch, regno);
+
+ if (!name || !*name)
+ return;
+
+ fprintf_filtered (file, "%-10s ", name);
+ m68hc11_print_register (gdbarch, file, frame, regno);
+ fprintf_filtered (file, "\n");
+ }
+ else
+ {
+ int i, nr;
+
+ fprintf_filtered (file, "PC=");
+ m68hc11_print_register (gdbarch, file, frame, HARD_PC_REGNUM);
+
+ fprintf_filtered (file, " SP=");
+ m68hc11_print_register (gdbarch, file, frame, HARD_SP_REGNUM);
+
+ fprintf_filtered (file, " FP=");
+ m68hc11_print_register (gdbarch, file, frame, SOFT_FP_REGNUM);
+
+ fprintf_filtered (file, "\nCCR=");
+ m68hc11_print_register (gdbarch, file, frame, HARD_CCR_REGNUM);
+
+ fprintf_filtered (file, "\nD=");
+ m68hc11_print_register (gdbarch, file, frame, HARD_D_REGNUM);
+
+ fprintf_filtered (file, " X=");
+ m68hc11_print_register (gdbarch, file, frame, HARD_X_REGNUM);
+
+ fprintf_filtered (file, " Y=");
+ m68hc11_print_register (gdbarch, file, frame, HARD_Y_REGNUM);
+
+ if (gdbarch_tdep (gdbarch)->use_page_register)
+ {
+ fprintf_filtered (file, "\nPage=");
+ m68hc11_print_register (gdbarch, file, frame, HARD_PAGE_REGNUM);
+ }
+ fprintf_filtered (file, "\n");
+
+ nr = 0;
+ for (i = SOFT_D1_REGNUM; i < M68HC11_ALL_REGS; i++)
+ {
+ /* Skip registers which are not defined in the symbol table. */
+ if (soft_regs[i].name == 0)
+ continue;
+
+ fprintf_filtered (file, "D%d=", i - SOFT_D1_REGNUM + 1);
+ m68hc11_print_register (gdbarch, file, frame, i);
+ nr++;
+ if ((nr % 8) == 7)
+ fprintf_filtered (file, "\n");
+ else
+ fprintf_filtered (file, " ");
+ }
+ if (nr && (nr % 8) != 7)
+ fprintf_filtered (file, "\n");
}
}
static void
show_regs (char *args, int from_tty)
{
- int ccr = read_register (PSW_REGNUM);
- int i;
-
- printf_filtered ("PC=%04x SP=%04x FP=%04x CCR=%02x %c%c%c%c%c%c%c%c\n",
- read_register (PC_REGNUM),
- read_register (SP_REGNUM),
- read_register (FP_REGNUM),
- ccr,
- ccr & M6811_S_BIT ? 'S' : '-',
- ccr & M6811_X_BIT ? 'X' : '-',
- ccr & M6811_H_BIT ? 'H' : '-',
- ccr & M6811_I_BIT ? 'I' : '-',
- ccr & M6811_N_BIT ? 'N' : '-',
- ccr & M6811_Z_BIT ? 'Z' : '-',
- ccr & M6811_V_BIT ? 'V' : '-',
- ccr & M6811_C_BIT ? 'C' : '-');
-
- printf_filtered ("D=%04x IX=%04x IY=%04x\n",
- read_register (D_REGNUM),
- read_register (X_REGNUM),
- read_register (Y_REGNUM));
- for (i = ZD1_REGNUM; i <= ZD32_REGNUM; i++)
- {
- printf_filtered ("ZD%d=%04x",
- i - ZD1_REGNUM + 1,
- read_register (i));
- if (((i - ZD1_REGNUM) % 8) == 7)
- printf_filtered ("\n");
- else
- printf_filtered (" ");
+ m68hc11_print_registers_info (current_gdbarch, gdb_stdout,
+ get_current_frame (), -1, 1);
+}
+
+static CORE_ADDR
+m68hc11_stack_align (CORE_ADDR addr)
+{
+ return ((addr + 1) & -2);
+}
+
+static CORE_ADDR
+m68hc11_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ int argnum;
+ int first_stack_argnum;
+ struct type *type;
+ char *val;
+ int len;
+ char buf[2];
+
+ first_stack_argnum = 0;
+ if (struct_return)
+ {
+ /* The struct is allocated on the stack and gdb used the stack
+ pointer for the address of that struct. We must apply the
+ stack offset on the address. */
+ regcache_cooked_write_unsigned (regcache, HARD_D_REGNUM,
+ struct_addr + STACK_CORRECTION);
+ }
+ else if (nargs > 0)
+ {
+ type = VALUE_TYPE (args[0]);
+ len = TYPE_LENGTH (type);
+
+ /* First argument is passed in D and X registers. */
+ if (len <= 4)
+ {
+ ULONGEST v;
+
+ v = extract_unsigned_integer (VALUE_CONTENTS (args[0]), len);
+ first_stack_argnum = 1;
+
+ regcache_cooked_write_unsigned (regcache, HARD_D_REGNUM, v);
+ if (len > 2)
+ {
+ v >>= 16;
+ regcache_cooked_write_unsigned (regcache, HARD_X_REGNUM, v);
+ }
+ }
+ }
+
+ for (argnum = nargs - 1; argnum >= first_stack_argnum; argnum--)
+ {
+ type = VALUE_TYPE (args[argnum]);
+ len = TYPE_LENGTH (type);
+
+ if (len & 1)
+ {
+ static char zero = 0;
+
+ sp--;
+ write_memory (sp, &zero, 1);
+ }
+ val = (char*) VALUE_CONTENTS (args[argnum]);
+ sp -= len;
+ write_memory (sp, val, len);
}
+
+ /* Store return address. */
+ sp -= 2;
+ store_unsigned_integer (buf, 2, bp_addr);
+ write_memory (sp, buf, 2);
+
+ /* Finally, update the stack pointer... */
+ sp -= STACK_CORRECTION;
+ regcache_cooked_write_unsigned (regcache, HARD_SP_REGNUM, sp);
+
+ /* ...and fake a frame pointer. */
+ regcache_cooked_write_unsigned (regcache, SOFT_FP_REGNUM, sp);
+
+ /* DWARF2/GCC uses the stack address *before* the function call as a
+ frame's CFA. */
+ return sp + 2;
}
-CORE_ADDR
-m68hc11_fix_call_dummy (char *dummyname,
- CORE_ADDR start_sp,
- CORE_ADDR fun,
- int nargs,
- value_ptr *args,
- struct type *type,
- int gcc_p)
+
+/* Return the GDB type object for the "standard" data type
+ of data in register N. */
+
+static struct type *
+m68hc11_register_type (struct gdbarch *gdbarch, int reg_nr)
{
- m68hc11_not_yet ("m68hc11_fix_call_dummy");
- return 0;
+ switch (reg_nr)
+ {
+ case HARD_PAGE_REGNUM:
+ case HARD_A_REGNUM:
+ case HARD_B_REGNUM:
+ case HARD_CCR_REGNUM:
+ return builtin_type_uint8;
+
+ case M68HC12_HARD_PC_REGNUM:
+ return builtin_type_uint32;
+
+ default:
+ return builtin_type_uint16;
+ }
}
static void
-m68hc11_pop_dummy_frame (struct frame_info *fi)
+m68hc11_store_return_value (struct type *type, struct regcache *regcache,
+ const void *valbuf)
{
- m68hc11_not_yet ("m68hc11_pop_dummy_frame");
+ int len;
+
+ len = TYPE_LENGTH (type);
+
+ /* First argument is passed in D and X registers. */
+ if (len <= 2)
+ regcache_raw_write_part (regcache, HARD_D_REGNUM, 2 - len, len, valbuf);
+ else if (len <= 4)
+ {
+ regcache_raw_write_part (regcache, HARD_X_REGNUM, 4 - len,
+ len - 2, valbuf);
+ regcache_raw_write (regcache, HARD_D_REGNUM, (char*) valbuf + (len - 2));
+ }
+ else
+ error ("return of value > 4 is not supported.");
}
-CORE_ADDR
-m68hc11_push_arguments (int nargs,
- value_ptr *args,
- CORE_ADDR sp,
- int struct_return,
- CORE_ADDR struct_addr)
+/* Given a return value in `regcache' with a type `type',
+ extract and copy its value into `valbuf'. */
+
+static void
+m68hc11_extract_return_value (struct type *type, struct regcache *regcache,
+ void *valbuf)
{
- m68hc11_not_yet ("m68hc11_push_arguments");
- return 0;
+ int len = TYPE_LENGTH (type);
+ char buf[M68HC11_REG_SIZE];
+
+ regcache_raw_read (regcache, HARD_D_REGNUM, buf);
+ switch (len)
+ {
+ case 1:
+ memcpy (valbuf, buf + 1, 1);
+ break;
+
+ case 2:
+ memcpy (valbuf, buf, 2);
+ break;
+
+ case 3:
+ memcpy ((char*) valbuf + 1, buf, 2);
+ regcache_raw_read (regcache, HARD_X_REGNUM, buf);
+ memcpy (valbuf, buf + 1, 1);
+ break;
+
+ case 4:
+ memcpy ((char*) valbuf + 2, buf, 2);
+ regcache_raw_read (regcache, HARD_X_REGNUM, buf);
+ memcpy (valbuf, buf, 2);
+ break;
+
+ default:
+ error ("bad size for return value");
+ }
}
+/* Should call_function allocate stack space for a struct return? */
+static int
+m68hc11_use_struct_convention (int gcc_p, struct type *type)
+{
+ return (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_LENGTH (type) > 4);
+}
-CORE_ADDR
-m68hc11_call_dummy_address (void)
+static int
+m68hc11_return_value_on_stack (struct type *type)
{
- m68hc11_not_yet ("m68hc11_call_dummy_address");
- return 0;
+ return TYPE_LENGTH (type) > 4;
}
-/* Given a return value in `regbuf' with a type `valtype',
- extract and copy its value into `valbuf'. */
+/* Extract from an array REGBUF containing the (raw) register state
+ the address in which a function should return its structure value,
+ as a CORE_ADDR (or an expression that can be used as one). */
+static CORE_ADDR
+m68hc11_extract_struct_value_address (struct regcache *regcache)
+{
+ char buf[M68HC11_REG_SIZE];
-void
-m68hc11_extract_return_value (struct type *valtype,
- char *regbuf,
- char *valbuf)
+ regcache_cooked_read (regcache, HARD_D_REGNUM, buf);
+ return extract_unsigned_integer (buf, M68HC11_REG_SIZE);
+}
+
+/* Test whether the ELF symbol corresponds to a function using rtc or
+ rti to return. */
+
+static void
+m68hc11_elf_make_msymbol_special (asymbol *sym, struct minimal_symbol *msym)
{
- m68hc11_not_yet ("m68hc11_extract_return_value");
+ unsigned char flags;
+
+ flags = ((elf_symbol_type *)sym)->internal_elf_sym.st_other;
+ if (flags & STO_M68HC12_FAR)
+ MSYMBOL_SET_RTC (msym);
+ if (flags & STO_M68HC12_INTERRUPT)
+ MSYMBOL_SET_RTI (msym);
}
+static int
+gdb_print_insn_m68hc11 (bfd_vma memaddr, disassemble_info *info)
+{
+ if (TARGET_ARCHITECTURE->arch == bfd_arch_m68hc11)
+ return print_insn_m68hc11 (memaddr, info);
+ else
+ return print_insn_m68hc12 (memaddr, info);
+}
+
+\f
+
+/* 68HC11/68HC12 register groups.
+ Identify real hard registers and soft registers used by gcc. */
+
+static struct reggroup *m68hc11_soft_reggroup;
+static struct reggroup *m68hc11_hard_reggroup;
+
+static void
+m68hc11_init_reggroups (void)
+{
+ m68hc11_hard_reggroup = reggroup_new ("hard", USER_REGGROUP);
+ m68hc11_soft_reggroup = reggroup_new ("soft", USER_REGGROUP);
+}
+
+static void
+m68hc11_add_reggroups (struct gdbarch *gdbarch)
+{
+ reggroup_add (gdbarch, m68hc11_hard_reggroup);
+ reggroup_add (gdbarch, m68hc11_soft_reggroup);
+ reggroup_add (gdbarch, general_reggroup);
+ reggroup_add (gdbarch, float_reggroup);
+ reggroup_add (gdbarch, all_reggroup);
+ reggroup_add (gdbarch, save_reggroup);
+ reggroup_add (gdbarch, restore_reggroup);
+ reggroup_add (gdbarch, vector_reggroup);
+ reggroup_add (gdbarch, system_reggroup);
+}
+
+static int
+m68hc11_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
+ struct reggroup *group)
+{
+ /* We must save the real hard register as well as gcc
+ soft registers including the frame pointer. */
+ if (group == save_reggroup || group == restore_reggroup)
+ {
+ return (regnum <= gdbarch_num_regs (gdbarch)
+ || ((regnum == SOFT_FP_REGNUM
+ || regnum == SOFT_TMP_REGNUM
+ || regnum == SOFT_ZS_REGNUM
+ || regnum == SOFT_XY_REGNUM)
+ && m68hc11_register_name (regnum)));
+ }
+
+ /* Group to identify gcc soft registers (d1..dN). */
+ if (group == m68hc11_soft_reggroup)
+ {
+ return regnum >= SOFT_D1_REGNUM && m68hc11_register_name (regnum);
+ }
+
+ if (group == m68hc11_hard_reggroup)
+ {
+ return regnum == HARD_PC_REGNUM || regnum == HARD_SP_REGNUM
+ || regnum == HARD_X_REGNUM || regnum == HARD_D_REGNUM
+ || regnum == HARD_Y_REGNUM || regnum == HARD_CCR_REGNUM;
+ }
+ return default_register_reggroup_p (gdbarch, regnum, group);
+}
+
+static struct gdbarch *
+m68hc11_gdbarch_init (struct gdbarch_info info,
+ struct gdbarch_list *arches)
+{
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int elf_flags;
+
+ soft_reg_initialized = 0;
+
+ /* Extract the elf_flags if available. */
+ if (info.abfd != NULL
+ && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
+ elf_flags = elf_elfheader (info.abfd)->e_flags;
+ else
+ elf_flags = 0;
+
+ /* try to find a pre-existing architecture */
+ for (arches = gdbarch_list_lookup_by_info (arches, &info);
+ arches != NULL;
+ arches = gdbarch_list_lookup_by_info (arches->next, &info))
+ {
+ if (gdbarch_tdep (arches->gdbarch)->elf_flags != elf_flags)
+ continue;
+
+ return arches->gdbarch;
+ }
+
+ /* Need a new architecture. Fill in a target specific vector. */
+ tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
+ gdbarch = gdbarch_alloc (&info, tdep);
+ tdep->elf_flags = elf_flags;
+
+ switch (info.bfd_arch_info->arch)
+ {
+ case bfd_arch_m68hc11:
+ tdep->stack_correction = 1;
+ tdep->use_page_register = 0;
+ tdep->prologue = m6811_prologue;
+ set_gdbarch_addr_bit (gdbarch, 16);
+ set_gdbarch_num_pseudo_regs (gdbarch, M68HC11_NUM_PSEUDO_REGS);
+ set_gdbarch_pc_regnum (gdbarch, HARD_PC_REGNUM);
+ set_gdbarch_num_regs (gdbarch, M68HC11_NUM_REGS);
+ break;
+
+ case bfd_arch_m68hc12:
+ tdep->stack_correction = 0;
+ tdep->use_page_register = elf_flags & E_M68HC12_BANKS;
+ tdep->prologue = m6812_prologue;
+ set_gdbarch_addr_bit (gdbarch, elf_flags & E_M68HC12_BANKS ? 32 : 16);
+ set_gdbarch_num_pseudo_regs (gdbarch,
+ elf_flags & E_M68HC12_BANKS
+ ? M68HC12_NUM_PSEUDO_REGS
+ : M68HC11_NUM_PSEUDO_REGS);
+ set_gdbarch_pc_regnum (gdbarch, elf_flags & E_M68HC12_BANKS
+ ? M68HC12_HARD_PC_REGNUM : HARD_PC_REGNUM);
+ set_gdbarch_num_regs (gdbarch, elf_flags & E_M68HC12_BANKS
+ ? M68HC12_NUM_REGS : M68HC11_NUM_REGS);
+ break;
+
+ default:
+ break;
+ }
+
+ /* Initially set everything according to the ABI.
+ Use 16-bit integers since it will be the case for most
+ programs. The size of these types should normally be set
+ according to the dwarf2 debug information. */
+ set_gdbarch_short_bit (gdbarch, 16);
+ set_gdbarch_int_bit (gdbarch, elf_flags & E_M68HC11_I32 ? 32 : 16);
+ set_gdbarch_float_bit (gdbarch, 32);
+ set_gdbarch_double_bit (gdbarch, elf_flags & E_M68HC11_F64 ? 64 : 32);
+ set_gdbarch_long_double_bit (gdbarch, 64);
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 16);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+
+ /* Characters are unsigned. */
+ set_gdbarch_char_signed (gdbarch, 0);
+
+ set_gdbarch_unwind_pc (gdbarch, m68hc11_unwind_pc);
+ set_gdbarch_unwind_sp (gdbarch, m68hc11_unwind_sp);
+
+ /* Set register info. */
+ set_gdbarch_fp0_regnum (gdbarch, -1);
+
+ set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
+
+ set_gdbarch_sp_regnum (gdbarch, HARD_SP_REGNUM);
+ set_gdbarch_register_name (gdbarch, m68hc11_register_name);
+ set_gdbarch_register_type (gdbarch, m68hc11_register_type);
+ set_gdbarch_pseudo_register_read (gdbarch, m68hc11_pseudo_register_read);
+ set_gdbarch_pseudo_register_write (gdbarch, m68hc11_pseudo_register_write);
+
+ set_gdbarch_push_dummy_call (gdbarch, m68hc11_push_dummy_call);
+
+ set_gdbarch_extract_return_value (gdbarch, m68hc11_extract_return_value);
+ set_gdbarch_return_value_on_stack (gdbarch, m68hc11_return_value_on_stack);
+
+ set_gdbarch_store_return_value (gdbarch, m68hc11_store_return_value);
+ set_gdbarch_deprecated_extract_struct_value_address (gdbarch, m68hc11_extract_struct_value_address);
+ set_gdbarch_use_struct_convention (gdbarch, m68hc11_use_struct_convention);
+ set_gdbarch_skip_prologue (gdbarch, m68hc11_skip_prologue);
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+ set_gdbarch_breakpoint_from_pc (gdbarch, m68hc11_breakpoint_from_pc);
+ set_gdbarch_deprecated_stack_align (gdbarch, m68hc11_stack_align);
+ set_gdbarch_print_insn (gdbarch, gdb_print_insn_m68hc11);
+
+ m68hc11_add_reggroups (gdbarch);
+ set_gdbarch_register_reggroup_p (gdbarch, m68hc11_register_reggroup_p);
+ set_gdbarch_print_registers_info (gdbarch, m68hc11_print_registers_info);
+
+ /* Hook in the DWARF CFI frame unwinder. */
+ frame_unwind_append_sniffer (gdbarch, dwarf2_frame_sniffer);
+
+ frame_unwind_append_sniffer (gdbarch, m68hc11_frame_sniffer);
+ frame_base_set_default (gdbarch, &m68hc11_frame_base);
+
+ /* Methods for saving / extracting a dummy frame's ID. The ID's
+ stack address must match the SP value returned by
+ PUSH_DUMMY_CALL, and saved by generic_save_dummy_frame_tos. */
+ set_gdbarch_unwind_dummy_id (gdbarch, m68hc11_unwind_dummy_id);
+
+ /* Return the unwound PC value. */
+ set_gdbarch_unwind_pc (gdbarch, m68hc11_unwind_pc);
+
+ /* Minsymbol frobbing. */
+ set_gdbarch_elf_make_msymbol_special (gdbarch,
+ m68hc11_elf_make_msymbol_special);
+
+ set_gdbarch_believe_pcc_promotion (gdbarch, 1);
+
+ return gdbarch;
+}
+
+extern initialize_file_ftype _initialize_m68hc11_tdep; /* -Wmissing-prototypes */
+
void
_initialize_m68hc11_tdep (void)
{
- tm_print_insn = print_insn_m68hc11;
+ register_gdbarch_init (bfd_arch_m68hc11, m68hc11_gdbarch_init);
+ register_gdbarch_init (bfd_arch_m68hc12, m68hc11_gdbarch_init);
+ m68hc11_init_reggroups ();
- add_com ("regs", class_vars, show_regs, "Print all registers");
+ deprecate_cmd (add_com ("regs", class_vars, show_regs,
+ "Print all registers"),
+ "info registers");
}