-/* Copyright (C) 1988, 1990 Free Software Foundation, Inc.
+/* Target-dependent code for the Motorola 88000 series.
-This file is part of GDB.
+ Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This file is part of GDB.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
-#include <stdio.h>
#include "defs.h"
-#include "param.h"
+#include "arch-utils.h"
+#include "dis-asm.h"
#include "frame.h"
-#include "inferior.h"
+#include "frame-base.h"
+#include "frame-unwind.h"
+#include "gdbcore.h"
+#include "gdbtypes.h"
+#include "regcache.h"
+#include "regset.h"
+#include "symtab.h"
+#include "trad-frame.h"
#include "value.h"
-#ifdef USG
-#include <sys/types.h>
-#endif
+#include "gdb_assert.h"
+#include "gdb_string.h"
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include "gdbcore.h"
-#include <sys/user.h>
-#ifndef USER /* added to support BCS ptrace_user */
+#include "m88k-tdep.h"
-#define USER ptrace_user
-#endif
-#include <sys/ioctl.h>
-#include <fcntl.h>
+/* Fetch the instruction at PC. */
-#include <sys/file.h>
-#include <sys/stat.h>
+static unsigned long
+m88k_fetch_instruction (CORE_ADDR pc)
+{
+ return read_memory_unsigned_integer (pc, 4);
+}
-#include "symtab.h"
-#include "setjmp.h"
-#include "value.h"
+/* Register information. */
-int stack_error;
-jmp_buf stack_jmp;
+/* Return the name of register REGNUM. */
-void
-tdesc_error_function (environment, continuable, message)
-dc_word_t environment;
-dc_boolean_t continuable;
-char *message;
+static const char *
+m88k_register_name (int regnum)
{
- if (stack_error) longjmp (stack_jmp, 1);
- if (!continuable)
- {
- printf("%s\n",message);
- abort();
- }
-}
+ static char *register_names[] =
+ {
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+ "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+ "epsr", "fpsr", "fpcr", "sxip", "snip", "sfip"
+ };
+ if (regnum >= 0 && regnum < ARRAY_SIZE (register_names))
+ return register_names[regnum];
-void
-tdesc_read_function (environment, memory, length, buffer)
-dc_word_t environment;
-dc_word_t memory;
-int length;
-char *buffer;
-{
- int ptrace_code;
- errno = 0;
- if (memory < 2048)
-#if 0
- /* This is a no-op! It sets buffer, but doesn't do anything to
- what buffer points to. What does this function do anyway?
- And this is wrong for cross-debugging. */
- buffer = ptrace (3, inferior_pid, memory, 0);
-#else
- return;
-#endif
- else
- read_memory (memory, buffer, length);
+ return NULL;
}
-/* Map function for tdesc */
-void
-tdesc_map_function (map_env, loc, map_info_in, map_info_out)
-dc_word_t map_env;
-dc_word_t loc;
-dc_map_info_in_t map_info_in;
-dc_map_info_out_t *map_info_out;
-{
-int map_flags = DC_MIO_ENTRY_POINT | DC_MIO_IMPLICIT_PROLOGUE_END;
-int entry_point = get_pc_function_start(loc);
-map_info_out->flags = map_flags;
-map_info_out->entry_point = entry_point;
-}
+/* Return the GDB type object for the "standard" data type of data in
+ register REGNUM. */
-dc_handle_t tdesc_handle;
+static struct type *
+m88k_register_type (struct gdbarch *gdbarch, int regnum)
+{
+ /* SXIP, SNIP, SFIP and R1 contain code addresses. */
+ if ((regnum >= M88K_SXIP_REGNUM && regnum <= M88K_SFIP_REGNUM)
+ || regnum == M88K_R1_REGNUM)
+ return builtin_type_void_func_ptr;
-extern int debug_info;
+ /* R30 and R31 typically contains data addresses. */
+ if (regnum == M88K_R30_REGNUM || regnum == M88K_R31_REGNUM)
+ return builtin_type_void_data_ptr;
-void
-init_tdesc ()
-{
- tdesc_handle = dc_initiate (debug_info, tdesc_error_function,
- 0,tdesc_read_function,0,0,0,0,0,tdesc_map_function,0);
-}
-dc_dcontext_t current_context;
-
-/* setup current context, called from wait_for_inferior */
-
-dc_dcontext_t
-init_dcontext()
-{
- dc_word_t reg_info[DC_NUM_REG];
- dc_word_t reg_flags[2] = {0,-1};
- dc_word_t aux_info[DC_NUM_AUX];
- dc_word_t aux_flags[2] = {0,-1};
- dc_exactness_t loc_exact = DC_NO;
- dc_word_t psr_info;
- dc_boolean_t psr_ind = 0;
- dc_word_t psr_flags[2] = {0,-1};
-
- bcopy (®isters, reg_info, DC_NUM_REG * 4);
- aux_info[DC_AUX_LOC] = read_register(SXIP_REGNUM);
- aux_info[DC_AUX_SXIP] = read_register(SXIP_REGNUM);
- aux_info[DC_AUX_SNIP] = read_register(SNIP_REGNUM);
- aux_info[DC_AUX_SFIP] = read_register(SFIP_REGNUM);
- aux_info[DC_AUX_FPSR] = read_register(FPSR_REGNUM);
- aux_info[DC_AUX_FPCR] = read_register(FPCR_REGNUM);
-
- psr_info = read_register(PSR_REGNUM);
-
- return dc_make_dcontext (tdesc_handle, reg_info, reg_flags, aux_info,
- aux_flags, loc_exact, psr_info, psr_ind, psr_flags);
+ return builtin_type_int32;
}
+\f
-
-dc_dcontext_t
-get_prev_context (context)
- dc_dcontext_t context;
+static CORE_ADDR
+m88k_addr_bits_remove (CORE_ADDR addr)
{
- return current_context = dc_previous_dcontext (context);
+ /* All instructures are 4-byte aligned. The lower 2 bits of SXIP,
+ SNIP and SFIP are used for special purposes: bit 0 is the
+ exception bit and bit 1 is the valid bit. */
+ return addr & ~0x3;
}
-
+/* Use the program counter to determine the contents and size of a
+ breakpoint instruction. Return a pointer to a string of bytes that
+ encode a breakpoint instruction, store the length of the string in
+ *LEN and optionally adjust *PC to point to the correct memory
+ location for inserting the breakpoint. */
+
+static const gdb_byte *
+m88k_breakpoint_from_pc (CORE_ADDR *pc, int *len)
+{
+ /* tb 0,r0,511 */
+ static gdb_byte break_insn[] = { 0xf0, 0x00, 0xd1, 0xff };
+
+ *len = sizeof (break_insn);
+ return break_insn;
+}
+static CORE_ADDR
+m88k_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ CORE_ADDR pc;
-/* Determine frame base for this file's frames. This will be either
- the CFA or the old style FP_REGNUM; the symtab for the current pc's
- file has the information */
+ pc = frame_unwind_register_unsigned (next_frame, M88K_SXIP_REGNUM);
+ return m88k_addr_bits_remove (pc);
+}
-CORE_ADDR
-get_frame_base(pc)
-CORE_ADDR pc;
+static void
+m88k_write_pc (CORE_ADDR pc, ptid_t ptid)
{
- struct symtab *this_file = find_pc_symtab(pc);
- int coffsem_frame_position;
-
- /* If this_file is null, there's a good chance the file was compiled
- without -g. If that's the case, use CFA (canonical frame addr)
- as the default frame pointer. */
+ /* According to the MC88100 RISC Microprocessor User's Manual,
+ section 6.4.3.1.2:
+
+ "... can be made to return to a particular instruction by placing
+ a valid instruction address in the SNIP and the next sequential
+ instruction address in the SFIP (with V bits set and E bits
+ clear). The rte resumes execution at the instruction pointed to
+ by the SNIP, then the SFIP."
+
+ The E bit is the least significant bit (bit 0). The V (valid)
+ bit is bit 1. This is why we logical or 2 into the values we are
+ writing below. It turns out that SXIP plays no role when
+ returning from an exception so nothing special has to be done
+ with it. We could even (presumably) give it a totally bogus
+ value. */
+
+ write_register_pid (M88K_SXIP_REGNUM, pc, ptid);
+ write_register_pid (M88K_SNIP_REGNUM, pc | 2, ptid);
+ write_register_pid (M88K_SFIP_REGNUM, (pc + 4) | 2, ptid);
+}
+\f
+
+/* The functions on this page are intended to be used to classify
+ function arguments. */
- if (this_file)
+/* Check whether TYPE is "Integral or Pointer". */
+
+static int
+m88k_integral_or_pointer_p (const struct type *type)
+{
+ switch (TYPE_CODE (type))
{
- coffsem_frame_position = this_file->coffsem & 3;
- if (coffsem_frame_position == 1)
- return (CORE_ADDR) dc_general_register (current_context, FP_REGNUM);
- else
- /* default is CFA, as well as if coffsem==2 */
- return (CORE_ADDR) dc_frame_address (current_context);
+ case TYPE_CODE_INT:
+ case TYPE_CODE_BOOL:
+ case TYPE_CODE_CHAR:
+ case TYPE_CODE_ENUM:
+ case TYPE_CODE_RANGE:
+ {
+ /* We have byte, half-word, word and extended-word/doubleword
+ integral types. */
+ int len = TYPE_LENGTH (type);
+ return (len == 1 || len == 2 || len == 4 || len == 8);
+ }
+ return 1;
+ case TYPE_CODE_PTR:
+ case TYPE_CODE_REF:
+ {
+ /* Allow only 32-bit pointers. */
+ return (TYPE_LENGTH (type) == 4);
+ }
+ return 1;
+ default:
+ break;
}
- return (CORE_ADDR) dc_frame_address (current_context);
+ return 0;
}
-#if TARGET_BYTE_ORDER != HOST_BYTE_ORDER
-you lose
-#else /* Host and target byte order the same. */
-#define SINGLE_EXP_BITS 8
-#define DOUBLE_EXP_BITS 11
-int
-IEEE_isNAN(fp, len)
- int *fp, len;
- /* fp points to a single precision OR double precision
- * floating point value; len is the number of bytes, either 4 or 8.
- * Returns 1 iff fp points to a valid IEEE floating point number.
- * Returns 0 if fp points to a denormalized number or a NaN
- */
-{
- int exponent;
- if (len == 4)
- {
- exponent = *fp;
- exponent = exponent << 1 >> (32 - SINGLE_EXP_BITS - 1);
- return ((exponent == -1) || (! exponent && *fp));
- }
- else if (len == 8)
+/* Check whether TYPE is "Floating". */
+
+static int
+m88k_floating_p (const struct type *type)
+{
+ switch (TYPE_CODE (type))
{
- exponent = *(fp+1);
- exponent = exponent << 1 >> (32 - DOUBLE_EXP_BITS - 1);
- return ((exponent == -1) || (! exponent && *fp * *(fp+1)));
+ case TYPE_CODE_FLT:
+ {
+ int len = TYPE_LENGTH (type);
+ return (len == 4 || len == 8);
+ }
+ default:
+ break;
}
- else return 1;
+
+ return 0;
}
-#endif /* Host and target byte order the same. */
-#define FIRST_PRESERVED_REGNUM 14
-#define LAST_PRESERVED_REGNUM 25
-#define FIRST_PARM_REGNUM 2
-#define LAST_PARM_REGNUM 9
+/* Check whether TYPE is "Structure or Union". */
-#define MAX_REG_PARMS (LAST_PARM_REGNUM - FIRST_PARM_REGNUM + 1)
+static int
+m88k_structure_or_union_p (const struct type *type)
+{
+ switch (TYPE_CODE (type))
+ {
+ case TYPE_CODE_STRUCT:
+ case TYPE_CODE_UNION:
+ return 1;
+ default:
+ break;
+ }
-void
-frame_find_saved_regs (fi, fsr)
- struct frame_info *fi;
- struct frame_saved_regs *fsr;
-{
- register int regnum;
-
- error ("Feature not implemented for the 88k yet.");
- return;
-
-#if 0
- for (regnum = FIRST_PARM_REGNUM; regnum <= LAST_PARM_REGNUM; regnum++)
- fsr->regs[regnum]
- = (unsigned) fi->frame - ((regnum - FIRST_PARM_REGNUM) * 4);
-
- fsr->regs[SP_REGNUM] = 0; /* SP not saved in frames */
- fsr->regs[FP_REGNUM] = fi->frame;
- fsr->regs[PC_REGNUM] = fi->frame + 4;
-#endif
+ return 0;
}
+/* Check whether TYPE has 8-byte alignment. */
+
static int
-pushed_size (prev_words, v)
- int prev_words;
- struct value *v;
+m88k_8_byte_align_p (struct type *type)
{
- switch (TYPE_CODE (VALUE_TYPE (v)))
+ if (m88k_structure_or_union_p (type))
{
- case TYPE_CODE_VOID: /* Void type (values zero length) */
+ int i;
- return 0; /* That was easy! */
-
- case TYPE_CODE_PTR: /* Pointer type */
- case TYPE_CODE_ENUM: /* Enumeration type */
- case TYPE_CODE_INT: /* Integer type */
- case TYPE_CODE_REF: /* C++ Reference types */
- case TYPE_CODE_ARRAY: /* Array type, lower bound zero */
-
- return 1;
+ for (i = 0; i < TYPE_NFIELDS (type); i++)
+ {
+ struct type *subtype = check_typedef (TYPE_FIELD_TYPE (type, i));
- case TYPE_CODE_FLT: /* Floating type */
+ if (m88k_8_byte_align_p (subtype))
+ return 1;
+ }
+ }
- if (TYPE_LENGTH (VALUE_TYPE (v)) == 4)
- return 1;
- else
- /* Assume that it must be a double. */
- if (prev_words & 1) /* at an odd-word boundary */
- return 3; /* round to 8-byte boundary */
- else
- return 2;
+ if (m88k_integral_or_pointer_p (type) || m88k_floating_p (type))
+ return (TYPE_LENGTH (type) == 8);
- case TYPE_CODE_STRUCT: /* C struct or Pascal record */
- case TYPE_CODE_UNION: /* C union or Pascal variant part */
+ return 0;
+}
- return (((TYPE_LENGTH (VALUE_TYPE (v)) + 3) / 4) * 4);
+/* Check whether TYPE can be passed in a register. */
- case TYPE_CODE_FUNC: /* Function type */
- case TYPE_CODE_SET: /* Pascal sets */
- case TYPE_CODE_RANGE: /* Range (integers within bounds) */
- case TYPE_CODE_PASCAL_ARRAY: /* Array with explicit type of index */
- case TYPE_CODE_MEMBER: /* Member type */
- case TYPE_CODE_METHOD: /* Method type */
- /* Don't know how to pass these yet. */
+static int
+m88k_in_register_p (struct type *type)
+{
+ if (m88k_integral_or_pointer_p (type) || m88k_floating_p (type))
+ return 1;
- case TYPE_CODE_UNDEF: /* Not used; catches errors */
- default:
- abort ();
- }
-}
+ if (m88k_structure_or_union_p (type) && TYPE_LENGTH (type) == 4)
+ return 1;
-static void
-store_parm_word (address, val)
- CORE_ADDR address;
- int val;
-{
- write_memory (address, &val, 4);
+ return 0;
}
-static int
-store_parm (prev_words, left_parm_addr, v)
- unsigned int prev_words;
- CORE_ADDR left_parm_addr;
- struct value *v;
+static CORE_ADDR
+m88k_store_arguments (struct regcache *regcache, int nargs,
+ struct value **args, CORE_ADDR sp)
{
- CORE_ADDR start = left_parm_addr + (prev_words * 4);
- int *val_addr = (int *)VALUE_CONTENTS(v);
+ int num_register_words = 0;
+ int num_stack_words = 0;
+ int i;
- switch (TYPE_CODE (VALUE_TYPE (v)))
+ for (i = 0; i < nargs; i++)
{
- case TYPE_CODE_VOID: /* Void type (values zero length) */
+ struct type *type = value_type (args[i]);
+ int len = TYPE_LENGTH (type);
- return 0;
+ if (m88k_integral_or_pointer_p (type) && len < 4)
+ {
+ args[i] = value_cast (builtin_type_int32, args[i]);
+ type = value_type (args[i]);
+ len = TYPE_LENGTH (type);
+ }
- case TYPE_CODE_PTR: /* Pointer type */
- case TYPE_CODE_ENUM: /* Enumeration type */
- case TYPE_CODE_INT: /* Integer type */
- case TYPE_CODE_ARRAY: /* Array type, lower bound zero */
- case TYPE_CODE_REF: /* C++ Reference types */
+ if (m88k_in_register_p (type))
+ {
+ int num_words = 0;
- store_parm_word (start, *val_addr);
- return 1;
+ if (num_register_words % 2 == 1 && m88k_8_byte_align_p (type))
+ num_words++;
- case TYPE_CODE_FLT: /* Floating type */
+ num_words += ((len + 3) / 4);
+ if (num_register_words + num_words <= 8)
+ {
+ num_register_words += num_words;
+ continue;
+ }
- if (TYPE_LENGTH (VALUE_TYPE (v)) == 4)
- {
- store_parm_word (start, *val_addr);
- return 1;
- }
- else
- {
- store_parm_word (start + ((prev_words & 1) * 4), val_addr[0]);
- store_parm_word (start + ((prev_words & 1) * 4) + 4, val_addr[1]);
- return 2 + (prev_words & 1);
- }
+ /* We've run out of available registers. Pass the argument
+ on the stack. */
+ }
+
+ if (num_stack_words % 2 == 1 && m88k_8_byte_align_p (type))
+ num_stack_words++;
+
+ num_stack_words += ((len + 3) / 4);
+ }
- case TYPE_CODE_STRUCT: /* C struct or Pascal record */
- case TYPE_CODE_UNION: /* C union or Pascal variant part */
+ /* Allocate stack space. */
+ sp = align_down (sp - 32 - num_stack_words * 4, 16);
+ num_stack_words = num_register_words = 0;
+ for (i = 0; i < nargs; i++)
+ {
+ const bfd_byte *valbuf = value_contents (args[i]);
+ struct type *type = value_type (args[i]);
+ int len = TYPE_LENGTH (type);
+ int stack_word = num_stack_words;
+
+ if (m88k_in_register_p (type))
{
- unsigned int words = (((TYPE_LENGTH (VALUE_TYPE (v)) + 3) / 4) * 4);
- unsigned int word;
+ int register_word = num_register_words;
+
+ if (register_word % 2 == 1 && m88k_8_byte_align_p (type))
+ register_word++;
- for (word = 0; word < words; word++)
- store_parm_word (start + (word * 4), val_addr[word]);
- return words;
+ gdb_assert (len == 4 || len == 8);
+
+ if (register_word + len / 8 < 8)
+ {
+ int regnum = M88K_R2_REGNUM + register_word;
+
+ regcache_raw_write (regcache, regnum, valbuf);
+ if (len > 4)
+ regcache_raw_write (regcache, regnum + 1, valbuf + 4);
+
+ num_register_words = (register_word + len / 4);
+ continue;
+ }
}
- default:
- abort ();
+ if (stack_word % 2 == -1 && m88k_8_byte_align_p (type))
+ stack_word++;
+
+ write_memory (sp + stack_word * 4, valbuf, len);
+ num_stack_words = (stack_word + (len + 3) / 4);
}
+
+ return sp;
}
- /* This routine sets up all of the parameter values needed to make a pseudo
- call. The name "push_parameters" is a misnomer on some archs,
- because (on the m88k) most parameters generally end up being passed in
- registers rather than on the stack. In this routine however, we do
- end up storing *all* parameter values onto the stack (even if we will
- realize later that some of these stores were unnecessary). */
+static CORE_ADDR
+m88k_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
+ struct value **args, CORE_ADDR sp, int struct_return,
+ CORE_ADDR struct_addr)
+{
+ /* Set up the function arguments. */
+ sp = m88k_store_arguments (regcache, nargs, args, sp);
+ gdb_assert (sp % 16 == 0);
-void
-push_parameters (return_type, struct_conv, nargs, args)
- struct type *return_type;
- int struct_conv;
- int nargs;
- value *args;
- {
- int parm_num;
- unsigned int p_words = 0;
- CORE_ADDR left_parm_addr;
-
- /* Start out by creating a space for the return value (if need be). We
- only need to do this if the return value is a struct or union. If we
- do make a space for a struct or union return value, then we must also
- arrange for the base address of that space to go into r12, which is the
- standard place to pass the address of the return value area to the
- callee. Note that only structs and unions are returned in this fashion.
- Ints, enums, pointers, and floats are returned into r2. Doubles are
- returned into the register pair {r2,r3}. Note also that the space
- reserved for a struct or union return value only has to be word aligned
- (not double-word) but it is double-word aligned here anyway (just in
- case that becomes important someday). */
-
- switch (TYPE_CODE (return_type))
- {
- case TYPE_CODE_STRUCT:
- case TYPE_CODE_UNION:
- {
- int return_bytes = ((TYPE_LENGTH (return_type) + 7) / 8) * 8;
- CORE_ADDR rv_addr;
-
- rv_addr = read_register (SP_REGNUM) - return_bytes;
-
- write_register (SP_REGNUM, rv_addr); /* push space onto the stack */
- write_register (SRA_REGNUM, rv_addr);/* set return value register */
- }
- }
-
- /* Here we make a pre-pass on the whole parameter list to figure out exactly
- how many words worth of stuff we are going to pass. */
-
- for (p_words = 0, parm_num = 0; parm_num < nargs; parm_num++)
- p_words += pushed_size (p_words, value_arg_coerce (args[parm_num]));
-
- /* Now, check to see if we have to round up the number of parameter words
- to get up to the next 8-bytes boundary. This may be necessary because
- of the software convention to always keep the stack aligned on an 8-byte
- boundary. */
-
- if (p_words & 1)
- p_words++; /* round to 8-byte boundary */
-
- /* Now figure out the absolute address of the leftmost parameter, and update
- the stack pointer to point at that address. */
-
- left_parm_addr = read_register (SP_REGNUM) - (p_words * 4);
- write_register (SP_REGNUM, left_parm_addr);
-
- /* Now we can go through all of the parameters (in left-to-right order)
- and write them to their parameter stack slots. Note that we are not
- really "pushing" the parameter values. The stack space for these values
- was already allocated above. Now we are just filling it up. */
-
- for (p_words = 0, parm_num = 0; parm_num < nargs; parm_num++)
- p_words +=
- store_parm (p_words, left_parm_addr, value_arg_coerce (args[parm_num]));
-
- /* Now that we are all done storing the parameter values into the stack, we
- must go back and load up the parameter registers with the values from the
- corresponding stack slots. Note that in the two cases of (a) gaps in the
- parameter word sequence causes by (otherwise) misaligned doubles, and (b)
- slots correcponding to structs or unions, the work we do here in loading
- some parameter registers may be unnecessary, but who cares? */
-
- for (p_words = 0; p_words < 8; p_words++)
- {
- write_register (FIRST_PARM_REGNUM + p_words,
- read_memory_integer (left_parm_addr + (p_words * 4), 4));
- }
+ /* Store return value address. */
+ if (struct_return)
+ regcache_raw_write_unsigned (regcache, M88K_R12_REGNUM, struct_addr);
+
+ /* Store the stack pointer and return address in the appropriate
+ registers. */
+ regcache_raw_write_unsigned (regcache, M88K_R31_REGNUM, sp);
+ regcache_raw_write_unsigned (regcache, M88K_R1_REGNUM, bp_addr);
+
+ /* Return the stack pointer. */
+ return sp;
}
-void
-pop_frame ()
+static struct frame_id
+m88k_unwind_dummy_id (struct gdbarch *arch, struct frame_info *next_frame)
{
- error ("Feature not implemented for the m88k yet.");
- return;
+ CORE_ADDR sp;
+
+ sp = frame_unwind_register_unsigned (next_frame, M88K_R31_REGNUM);
+ return frame_id_build (sp, frame_pc_unwind (next_frame));
}
+\f
+
+/* Determine, for architecture GDBARCH, how a return value of TYPE
+ should be returned. If it is supposed to be returned in registers,
+ and READBUF is non-zero, read the appropriate value from REGCACHE,
+ and copy it into READBUF. If WRITEBUF is non-zero, write the value
+ from WRITEBUF into REGCACHE. */
+
+static enum return_value_convention
+m88k_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache, gdb_byte *readbuf,
+ const gdb_byte *writebuf)
+{
+ int len = TYPE_LENGTH (type);
+ gdb_byte buf[8];
- void
- collect_returned_value (rval, value_type, struct_return, nargs, args)
- value *rval;
- struct type *value_type;
- int struct_return;
- int nargs;
- value *args;
- {
- char retbuf[REGISTER_BYTES];
-
- bcopy (registers, retbuf, REGISTER_BYTES);
- *rval = value_being_returned (value_type, retbuf, struct_return);
- return;
- }
-
-#if 0
-/* Now handled in a machine independent way with CALL_DUMMY_LOCATION. */
- /* Stuff a breakpoint instruction onto the stack (or elsewhere if the stack
- is not a good place for it). Return the address at which the instruction
- got stuffed, or zero if we were unable to stuff it anywhere. */
-
- CORE_ADDR
- push_breakpoint ()
- {
- static char breakpoint_insn[] = BREAKPOINT;
- extern CORE_ADDR text_end; /* of inferior */
- static char readback_buffer[] = BREAKPOINT;
- int i;
-
- /* With a little bit of luck, we can just stash the breakpoint instruction
- in the word just beyond the end of normal text space. For systems on
- which the hardware will not allow us to execute out of the stack segment,
- we have to hope that we *are* at least allowed to effectively extend the
- text segment by one word. If the actual end of user's the text segment
- happens to fall right at a page boundary this trick may fail. Note that
- we check for this by reading after writing, and comparing in order to
- be sure that the write worked. */
-
- write_memory (text_end, &breakpoint_insn, 4);
-
- /* Fill the readback buffer with some garbage which is certain to be
- unequal to the breakpoint insn. That way we can tell if the
- following read doesn't actually succeed. */
-
- for (i = 0; i < sizeof (readback_buffer); i++)
- readback_buffer[i] = ~ readback_buffer[i]; /* Invert the bits */
-
- /* Now check that the breakpoint insn was successfully installed. */
-
- read_memory (text_end, readback_buffer, sizeof (readback_buffer));
- for (i = 0; i < sizeof (readback_buffer); i++)
- if (readback_buffer[i] != breakpoint_insn[i])
- return 0; /* Failed to install! */
-
- return text_end;
- }
-#endif
-
-/* Like dc_psr_register but takes an extra int arg. */
-static dc_word_t
-psr_register (context, dummy)
- dc_dcontext_t context;
- int dummy;
-{
- return dc_psr_register (context);
+ if (!m88k_integral_or_pointer_p (type) && !m88k_floating_p (type))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+
+ if (readbuf)
+ {
+ /* Read the contents of R2 and (if necessary) R3. */
+ regcache_cooked_read (regcache, M88K_R2_REGNUM, buf);
+ if (len > 4)
+ {
+ regcache_cooked_read (regcache, M88K_R3_REGNUM, buf + 4);
+ gdb_assert (len == 8);
+ memcpy (readbuf, buf, len);
+ }
+ else
+ {
+ /* Just stripping off any unused bytes should preserve the
+ signed-ness just fine. */
+ memcpy (readbuf, buf + 4 - len, len);
+ }
+ }
+
+ if (writebuf)
+ {
+ /* Read the contents to R2 and (if necessary) R3. */
+ if (len > 4)
+ {
+ gdb_assert (len == 8);
+ memcpy (buf, writebuf, 8);
+ regcache_cooked_write (regcache, M88K_R3_REGNUM, buf + 4);
+ }
+ else
+ {
+ /* ??? Do we need to do any sign-extension here? */
+ memcpy (buf + 4 - len, writebuf, len);
+ }
+ regcache_cooked_write (regcache, M88K_R2_REGNUM, buf);
+ }
+
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
+\f
+/* Default frame unwinder. */
-/* Same functionality as get_saved_register in findvar.c, but implemented
- to use tdesc. */
-void
-get_saved_register (raw_buffer, optim, addrp, frame, regnum, lvalp)
- char *raw_buffer;
- int *optim;
- CORE_ADDR *addrp;
- FRAME frame;
- int regnum;
- enum lval_type *lvalp;
-{
- struct frame_info *fi = get_frame_info (frame);
-
- /* Functions to say whether a register is optimized out, and
- if not, to get the value. Take as args a context and the
- value of get_reg_arg. */
- int (*get_reg_state) ();
- dc_word_t (*get_reg) ();
- int get_reg_arg;
-
- /* Because tdesc doesn't tell us whether it got it from a register
- or memory, always say we don't have an address for it. */
- if (addrp != NULL)
- *addrp = 0;
-
- if (regnum < DC_NUM_REG)
+struct m88k_frame_cache
+{
+ /* Base address. */
+ CORE_ADDR base;
+ CORE_ADDR pc;
+
+ int sp_offset;
+ int fp_offset;
+
+ /* Table of saved registers. */
+ struct trad_frame_saved_reg *saved_regs;
+};
+
+/* Prologue analysis. */
+
+/* Macros for extracting fields from instructions. */
+
+#define BITMASK(pos, width) (((0x1 << (width)) - 1) << (pos))
+#define EXTRACT_FIELD(val, pos, width) ((val) >> (pos) & BITMASK (0, width))
+#define SUBU_OFFSET(x) ((unsigned)(x & 0xFFFF))
+#define ST_OFFSET(x) ((unsigned)((x) & 0xFFFF))
+#define ST_SRC(x) EXTRACT_FIELD ((x), 21, 5)
+#define ADDU_OFFSET(x) ((unsigned)(x & 0xFFFF))
+
+/* Possible actions to be taken by the prologue analyzer for the
+ instructions it encounters. */
+
+enum m88k_prologue_insn_action
+{
+ M88K_PIA_SKIP, /* Ignore. */
+ M88K_PIA_NOTE_ST, /* Note register store. */
+ M88K_PIA_NOTE_STD, /* Note register pair store. */
+ M88K_PIA_NOTE_SP_ADJUSTMENT, /* Note stack pointer adjustment. */
+ M88K_PIA_NOTE_FP_ASSIGNMENT, /* Note frame pointer assignment. */
+ M88K_PIA_NOTE_BRANCH, /* Note branch. */
+ M88K_PIA_NOTE_PROLOGUE_END /* Note end of prologue. */
+};
+
+/* Table of instructions that may comprise a function prologue. */
+
+struct m88k_prologue_insn
+{
+ unsigned long insn;
+ unsigned long mask;
+ enum m88k_prologue_insn_action action;
+};
+
+struct m88k_prologue_insn m88k_prologue_insn_table[] =
+{
+ /* Various register move instructions. */
+ { 0x58000000, 0xf800ffff, M88K_PIA_SKIP }, /* or/or.u with immed of 0 */
+ { 0xf4005800, 0xfc1fffe0, M88K_PIA_SKIP }, /* or rd,r0,rs */
+ { 0xf4005800, 0xfc00ffff, M88K_PIA_SKIP }, /* or rd,rs,r0 */
+
+ /* Various other instructions. */
+ { 0x58000000, 0xf8000000, M88K_PIA_SKIP }, /* or/or.u */
+
+ /* Stack pointer setup: "subu sp,sp,n" where n is a multiple of 8. */
+ { 0x67ff0000, 0xffff0007, M88K_PIA_NOTE_SP_ADJUSTMENT },
+
+ /* Frame pointer assignment: "addu r30,r31,n". */
+ { 0x63df0000, 0xffff0000, M88K_PIA_NOTE_FP_ASSIGNMENT },
+
+ /* Store to stack instructions; either "st rx,sp,n" or "st.d rx,sp,n". */
+ { 0x241f0000, 0xfc1f0000, M88K_PIA_NOTE_ST }, /* st rx,sp,n */
+ { 0x201f0000, 0xfc1f0000, M88K_PIA_NOTE_STD }, /* st.d rs,sp,n */
+
+ /* Instructions needed for setting up r25 for pic code. */
+ { 0x5f200000, 0xffff0000, M88K_PIA_SKIP }, /* or.u r25,r0,offset_high */
+ { 0xcc000002, 0xffffffff, M88K_PIA_SKIP }, /* bsr.n Lab */
+ { 0x5b390000, 0xffff0000, M88K_PIA_SKIP }, /* or r25,r25,offset_low */
+ { 0xf7396001, 0xffffffff, M88K_PIA_SKIP }, /* Lab: addu r25,r25,r1 */
+
+ /* Various branch or jump instructions which have a delay slot --
+ these do not form part of the prologue, but the instruction in
+ the delay slot might be a store instruction which should be
+ noted. */
+ { 0xc4000000, 0xe4000000, M88K_PIA_NOTE_BRANCH },
+ /* br.n, bsr.n, bb0.n, or bb1.n */
+ { 0xec000000, 0xfc000000, M88K_PIA_NOTE_BRANCH }, /* bcnd.n */
+ { 0xf400c400, 0xfffff7e0, M88K_PIA_NOTE_BRANCH }, /* jmp.n or jsr.n */
+
+ /* Catch all. Ends prologue analysis. */
+ { 0x00000000, 0x00000000, M88K_PIA_NOTE_PROLOGUE_END }
+};
+
+/* Do a full analysis of the function prologue at PC and update CACHE
+ accordingly. Bail out early if LIMIT is reached. Return the
+ address where the analysis stopped. If LIMIT points beyond the
+ function prologue, the return address should be the end of the
+ prologue. */
+
+static CORE_ADDR
+m88k_analyze_prologue (CORE_ADDR pc, CORE_ADDR limit,
+ struct m88k_frame_cache *cache)
+{
+ CORE_ADDR end = limit;
+
+ /* Provide a dummy cache if necessary. */
+ if (cache == NULL)
{
- get_reg_state = dc_general_register_state;
- get_reg = dc_general_register;
- get_reg_arg = regnum;
+ size_t sizeof_saved_regs =
+ (M88K_R31_REGNUM + 1) * sizeof (struct trad_frame_saved_reg);
+
+ cache = alloca (sizeof (struct m88k_frame_cache));
+ cache->saved_regs = alloca (sizeof_saved_regs);
+
+ /* We only initialize the members we care about. */
+ cache->saved_regs[M88K_R1_REGNUM].addr = -1;
+ cache->fp_offset = -1;
}
- else
+
+ while (pc < limit)
{
- get_reg_state = dc_auxiliary_register_state;
- get_reg = dc_auxiliary_register;
- switch (regnum)
+ struct m88k_prologue_insn *pi = m88k_prologue_insn_table;
+ unsigned long insn = m88k_fetch_instruction (pc);
+
+ while ((insn & pi->mask) != pi->insn)
+ pi++;
+
+ switch (pi->action)
{
- case SXIP_REGNUM:
- get_reg_arg = DC_AUX_SXIP;
+ case M88K_PIA_SKIP:
+ /* If we have a frame pointer, and R1 has been saved,
+ consider this instruction as not being part of the
+ prologue. */
+ if (cache->fp_offset != -1
+ && cache->saved_regs[M88K_R1_REGNUM].addr != -1)
+ return min (pc, end);
break;
- case SNIP_REGNUM:
- get_reg_arg = DC_AUX_SNIP;
+
+ case M88K_PIA_NOTE_ST:
+ case M88K_PIA_NOTE_STD:
+ /* If no frame has been allocated, the stores aren't part of
+ the prologue. */
+ if (cache->sp_offset == 0)
+ return min (pc, end);
+
+ /* Record location of saved registers. */
+ {
+ int regnum = ST_SRC (insn) + M88K_R0_REGNUM;
+ ULONGEST offset = ST_OFFSET (insn);
+
+ cache->saved_regs[regnum].addr = offset;
+ if (pi->action == M88K_PIA_NOTE_STD && regnum < M88K_R31_REGNUM)
+ cache->saved_regs[regnum + 1].addr = offset + 4;
+ }
break;
- case FPSR_REGNUM:
- get_reg_arg = DC_AUX_FPSR;
+
+ case M88K_PIA_NOTE_SP_ADJUSTMENT:
+ /* A second stack pointer adjustment isn't part of the
+ prologue. */
+ if (cache->sp_offset != 0)
+ return min (pc, end);
+
+ /* Store stack pointer adjustment. */
+ cache->sp_offset = -SUBU_OFFSET (insn);
break;
- case FPCR_REGNUM:
- get_reg_arg = DC_AUX_FPCR;
+
+ case M88K_PIA_NOTE_FP_ASSIGNMENT:
+ /* A second frame pointer assignment isn't part of the
+ prologue. */
+ if (cache->fp_offset != -1)
+ return min (pc, end);
+
+ /* Record frame pointer assignment. */
+ cache->fp_offset = ADDU_OFFSET (insn);
break;
- case PSR_REGNUM:
- get_reg_state = dc_psr_register_bit_state;
- get_reg = psr_register;
- get_reg_arg = 0;
+
+ case M88K_PIA_NOTE_BRANCH:
+ /* The branch instruction isn't part of the prologue, but
+ the instruction in the delay slot might be. Limit the
+ prologue analysis to the delay slot and record the branch
+ instruction as the end of the prologue. */
+ limit = min (limit, pc + 2 * M88K_INSN_SIZE);
+ end = pc;
break;
- default:
- if (optim != NULL)
- *optim = 1;
- return;
+
+ case M88K_PIA_NOTE_PROLOGUE_END:
+ return min (pc, end);
}
+
+ pc += M88K_INSN_SIZE;
}
- if ((*get_reg_state) (fi->frame_context, get_reg_arg))
+ return end;
+}
+
+/* An upper limit to the size of the prologue. */
+const int m88k_max_prologue_size = 128 * M88K_INSN_SIZE;
+
+/* Return the address of first real instruction of the function
+ starting at PC. */
+
+static CORE_ADDR
+m88k_skip_prologue (CORE_ADDR pc)
+{
+ struct symtab_and_line sal;
+ CORE_ADDR func_start, func_end;
+
+ /* This is the preferred method, find the end of the prologue by
+ using the debugging information. */
+ if (find_pc_partial_function (pc, NULL, &func_start, &func_end))
{
- if (raw_buffer != NULL)
- *(int *)raw_buffer = (*get_reg) (fi->frame_context, get_reg_arg);
- if (optim != NULL)
- *optim = 0;
- return;
+ sal = find_pc_line (func_start, 0);
+
+ if (sal.end < func_end && pc <= sal.end)
+ return sal.end;
+ }
+
+ return m88k_analyze_prologue (pc, pc + m88k_max_prologue_size, NULL);
+}
+
+struct m88k_frame_cache *
+m88k_frame_cache (struct frame_info *next_frame, void **this_cache)
+{
+ struct m88k_frame_cache *cache;
+ CORE_ADDR frame_sp;
+
+ if (*this_cache)
+ return *this_cache;
+
+ cache = FRAME_OBSTACK_ZALLOC (struct m88k_frame_cache);
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+ cache->fp_offset = -1;
+
+ cache->pc = frame_func_unwind (next_frame, NORMAL_FRAME);
+ if (cache->pc != 0)
+ m88k_analyze_prologue (cache->pc, frame_pc_unwind (next_frame), cache);
+
+ /* Calculate the stack pointer used in the prologue. */
+ if (cache->fp_offset != -1)
+ {
+ CORE_ADDR fp;
+
+ fp = frame_unwind_register_unsigned (next_frame, M88K_R30_REGNUM);
+ frame_sp = fp - cache->fp_offset;
}
else
{
- if (optim != NULL)
- *optim = 1;
+ /* If we know where the return address is saved, we can take a
+ solid guess at what the frame pointer should be. */
+ if (cache->saved_regs[M88K_R1_REGNUM].addr != -1)
+ cache->fp_offset = cache->saved_regs[M88K_R1_REGNUM].addr - 4;
+ frame_sp = frame_unwind_register_unsigned (next_frame, M88K_R31_REGNUM);
+ }
+
+ /* Now that we know the stack pointer, adjust the location of the
+ saved registers. */
+ {
+ int regnum;
+
+ for (regnum = M88K_R0_REGNUM; regnum < M88K_R31_REGNUM; regnum ++)
+ if (cache->saved_regs[regnum].addr != -1)
+ cache->saved_regs[regnum].addr += frame_sp;
+ }
+
+ /* Calculate the frame's base. */
+ cache->base = frame_sp - cache->sp_offset;
+ trad_frame_set_value (cache->saved_regs, M88K_R31_REGNUM, cache->base);
+
+ /* Identify SXIP with the return address in R1. */
+ cache->saved_regs[M88K_SXIP_REGNUM] = cache->saved_regs[M88K_R1_REGNUM];
+
+ *this_cache = cache;
+ return cache;
+}
+
+static void
+m88k_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct m88k_frame_cache *cache = m88k_frame_cache (next_frame, this_cache);
+
+ /* This marks the outermost frame. */
+ if (cache->base == 0)
+ return;
+
+ (*this_id) = frame_id_build (cache->base, cache->pc);
+}
+
+static void
+m88k_frame_prev_register (struct frame_info *next_frame, void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, gdb_byte *valuep)
+{
+ struct m88k_frame_cache *cache = m88k_frame_cache (next_frame, this_cache);
+
+ if (regnum == M88K_SNIP_REGNUM || regnum == M88K_SFIP_REGNUM)
+ {
+ if (valuep)
+ {
+ CORE_ADDR pc;
+
+ trad_frame_get_prev_register (next_frame, cache->saved_regs,
+ M88K_SXIP_REGNUM, optimizedp,
+ lvalp, addrp, realnump, valuep);
+
+ pc = extract_unsigned_integer (valuep, 4);
+ if (regnum == M88K_SFIP_REGNUM)
+ pc += 4;
+ store_unsigned_integer (valuep, 4, pc + 4);
+ }
+
+ /* It's a computed value. */
+ *optimizedp = 0;
+ *lvalp = not_lval;
+ *addrp = 0;
+ *realnump = -1;
return;
}
- /* Well, the caller can't treat it as a register or memory... */
- if (lvalp != NULL)
- *lvalp = not_lval;
+ trad_frame_get_prev_register (next_frame, cache->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
+
+static const struct frame_unwind m88k_frame_unwind =
+{
+ NORMAL_FRAME,
+ m88k_frame_this_id,
+ m88k_frame_prev_register
+};
+
+static const struct frame_unwind *
+m88k_frame_sniffer (struct frame_info *next_frame)
+{
+ return &m88k_frame_unwind;
+}
+\f
+
+static CORE_ADDR
+m88k_frame_base_address (struct frame_info *next_frame, void **this_cache)
+{
+ struct m88k_frame_cache *cache = m88k_frame_cache (next_frame, this_cache);
+
+ if (cache->fp_offset != -1)
+ return cache->base + cache->sp_offset + cache->fp_offset;
+
+ return 0;
+}
+
+static const struct frame_base m88k_frame_base =
+{
+ &m88k_frame_unwind,
+ m88k_frame_base_address,
+ m88k_frame_base_address,
+ m88k_frame_base_address
+};
+\f
+
+/* Core file support. */
+
+/* Supply register REGNUM from the buffer specified by GREGS and LEN
+ in the general-purpose register set REGSET to register cache
+ REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
+
+static void
+m88k_supply_gregset (const struct regset *regset,
+ struct regcache *regcache,
+ int regnum, const void *gregs, size_t len)
+{
+ const gdb_byte *regs = gregs;
+ int i;
+
+ for (i = 0; i < M88K_NUM_REGS; i++)
+ {
+ if (regnum == i || regnum == -1)
+ regcache_raw_supply (regcache, i, regs + i * 4);
+ }
+}
+
+/* Motorola 88000 register set. */
+
+static struct regset m88k_gregset =
+{
+ NULL,
+ m88k_supply_gregset
+};
+
+/* Return the appropriate register set for the core section identified
+ by SECT_NAME and SECT_SIZE. */
+
+static const struct regset *
+m88k_regset_from_core_section (struct gdbarch *gdbarch,
+ const char *sect_name, size_t sect_size)
+{
+ if (strcmp (sect_name, ".reg") == 0 && sect_size >= M88K_NUM_REGS * 4)
+ return &m88k_gregset;
+
+ return NULL;
+}
+\f
+
+static struct gdbarch *
+m88k_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
+{
+ struct gdbarch *gdbarch;
+
+ /* If there is already a candidate, use it. */
+ arches = gdbarch_list_lookup_by_info (arches, &info);
+ if (arches != NULL)
+ return arches->gdbarch;
+
+ /* Allocate space for the new architecture. */
+ gdbarch = gdbarch_alloc (&info, NULL);
+
+ /* There is no real `long double'. */
+ set_gdbarch_long_double_bit (gdbarch, 64);
+ set_gdbarch_long_double_format (gdbarch, floatformats_ieee_double);
+
+ set_gdbarch_num_regs (gdbarch, M88K_NUM_REGS);
+ set_gdbarch_register_name (gdbarch, m88k_register_name);
+ set_gdbarch_register_type (gdbarch, m88k_register_type);
+
+ /* Register numbers of various important registers. */
+ set_gdbarch_sp_regnum (gdbarch, M88K_R31_REGNUM);
+ set_gdbarch_pc_regnum (gdbarch, M88K_SXIP_REGNUM);
+
+ /* Core file support. */
+ set_gdbarch_regset_from_core_section
+ (gdbarch, m88k_regset_from_core_section);
+
+ set_gdbarch_print_insn (gdbarch, print_insn_m88k);
+
+ set_gdbarch_skip_prologue (gdbarch, m88k_skip_prologue);
+
+ /* Stack grows downward. */
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+
+ /* Call dummy code. */
+ set_gdbarch_push_dummy_call (gdbarch, m88k_push_dummy_call);
+ set_gdbarch_unwind_dummy_id (gdbarch, m88k_unwind_dummy_id);
+
+ /* Return value info */
+ set_gdbarch_return_value (gdbarch, m88k_return_value);
+
+ set_gdbarch_addr_bits_remove (gdbarch, m88k_addr_bits_remove);
+ set_gdbarch_breakpoint_from_pc (gdbarch, m88k_breakpoint_from_pc);
+ set_gdbarch_unwind_pc (gdbarch, m88k_unwind_pc);
+ set_gdbarch_write_pc (gdbarch, m88k_write_pc);
+
+ frame_base_set_default (gdbarch, &m88k_frame_base);
+ frame_unwind_append_sniffer (gdbarch, m88k_frame_sniffer);
+
+ return gdbarch;
+}
+\f
+
+/* Provide a prototype to silence -Wmissing-prototypes. */
+void _initialize_m88k_tdep (void);
+
+void
+_initialize_m88k_tdep (void)
+{
+ gdbarch_register (bfd_arch_m88k, m88k_gdbarch_init, NULL);
}