-/* Top level for GDB, the GNU debugger.
- Copyright (C) 1986, 1987, 1988 Free Software Foundation, Inc.
-
-GDB is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY. No author or distributor accepts responsibility to anyone
-for the consequences of using it or for whether it serves any
-particular purpose or works at all, unless he says so in writing.
-Refer to the GDB General Public License for full details.
-
-Everyone is granted permission to copy, modify and redistribute GDB,
-but only under the conditions described in the GDB General Public
-License. A copy of this license is supposed to have been given to you
-along with GDB so you can know your rights and responsibilities. It
-should be in a file named COPYING. Among other things, the copyright
-notice and this notice must be preserved on all copies.
-
-In other words, go ahead and share GDB, but don't try to stop
-anyone else from sharing it farther. Help stamp out software hoarding!
-*/
+/* Top level `main' program for GDB, the GNU debugger.
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992
+ Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
#include "defs.h"
-#include "command.h"
-#include "param.h"
+#include "gdbcmd.h"
+#include "call-cmds.h"
+#include "symtab.h"
+#include "inferior.h"
+#include "signals.h"
+#include "target.h"
+#include "breakpoint.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "language.h"
+
+#include "getopt.h"
+
+/* readline include files */
+#include "readline.h"
+#include "history.h"
+
+/* readline defines this. */
+#undef savestring
#ifdef USG
#include <sys/types.h>
#include <unistd.h>
#endif
+#include <string.h>
+#ifndef NO_SYS_FILE
#include <sys/file.h>
-#include <stdio.h>
+#endif
#include <setjmp.h>
-#include <signal.h>
#include <sys/param.h>
+#include <sys/stat.h>
+#include <ctype.h>
#ifdef SET_STACK_LIMIT_HUGE
#include <sys/time.h>
int original_stack_limit;
#endif
+/* Prototypes for local functions */
+
+static char *
+symbol_completion_function PARAMS ((char *, int));
+
+static void
+command_loop PARAMS ((void));
+
+static void
+command_loop_marker PARAMS ((int));
+
+static void
+print_gdb_version PARAMS ((FILE *));
+
+static void
+quit_command PARAMS ((char *, int));
+
+static void
+initialize_main PARAMS ((void));
+
+static void
+initialize_history PARAMS ((void));
+
+static void
+initialize_cmd_lists PARAMS ((void));
+
+static void
+float_handler PARAMS ((int));
+
+static void
+source_command PARAMS ((char *, int));
+
+static void
+cd_command PARAMS ((char *, int));
+
+static void
+print_gnu_advertisement PARAMS ((void));
+
+static void
+init_signals PARAMS ((void));
+
+static void
+read_command_file PARAMS ((FILE *));
+
+static void
+set_verbose PARAMS ((char *, int, struct cmd_list_element *));
+
+static void
+show_history PARAMS ((char *, int));
+
+static void
+set_history PARAMS ((char *, int));
+
+static void
+set_history_size_command PARAMS ((char *, int, struct cmd_list_element *));
+
+static void
+show_commands PARAMS ((char *, int));
+
+static void
+echo_command PARAMS ((char *, int));
+
+static void
+pwd_command PARAMS ((char *, int));
+
+static void
+show_version PARAMS ((char *, int));
+
+static void
+document_command PARAMS ((char *, int));
+
+static void
+define_command PARAMS ((char *, int));
+
+static void
+validate_comname PARAMS ((char *));
+
+static void
+help_command PARAMS ((char *, int));
+
+static void
+show_command PARAMS ((char *, int));
+
+static void
+info_command PARAMS ((char *, int));
+
+static void
+do_nothing PARAMS ((int));
+
+static int
+quit_cover PARAMS ((char *));
+
+static void
+disconnect PARAMS ((int));
+
+static void
+source_cleanup PARAMS ((FILE *));
+
+/* If this definition isn't overridden by the header files, assume
+ that isatty and fileno exist on this system. */
+#ifndef ISATTY
+#define ISATTY(FP) (isatty (fileno (FP)))
+#endif
+
+/* Initialization file name for gdb. This is overridden in some configs. */
+
+#ifndef GDBINIT_FILENAME
+#define GDBINIT_FILENAME ".gdbinit"
+#endif
+static char gdbinit[] = GDBINIT_FILENAME;
+static int inhibit_gdbinit = 0;
+
+#define ALL_CLEANUPS ((struct cleanup *)0)
+
/* Version number of GDB, as a string. */
extern char *version;
+/* Message to be printed before the error message, when an error occurs. */
+
+extern char *error_pre_print;
+
+/* Message to be printed before the warning message, when a warning occurs. */
+
+extern char *warning_pre_print;
+
+extern char lang_frame_mismatch_warn[]; /* language.c */
+
+/* Whether GDB's stdin is on a terminal. */
+
+extern int gdb_has_a_terminal; /* inflow.c */
+
+/* Flag for whether we want all the "from_tty" gubbish printed. */
+
+int caution = 1; /* Default is yes, sigh. */
+
/*
- * Declare all cmd_list_element's
+ * Define all cmd_list_element's
*/
/* Chain containing all defined commands. */
struct cmd_list_element *setlist;
+/* Chain containing all defined unset subcommands */
+
+struct cmd_list_element *unsetlist;
+
+/* Chain containing all defined show subcommands. */
+
+struct cmd_list_element *showlist;
+
+/* Chain containing all defined \"set history\". */
+
+struct cmd_list_element *sethistlist;
+
+/* Chain containing all defined \"show history\". */
+
+struct cmd_list_element *showhistlist;
+
+/* Chain containing all defined \"unset history\". */
+
+struct cmd_list_element *unsethistlist;
+
+/* Chain containing all defined maintenance subcommands. */
+
+#if MAINTENANCE_CMDS
+struct cmd_list_element *maintenancelist;
+#endif
+
+/* Chain containing all defined "maintenance info" subcommands. */
+
+#if MAINTENANCE_CMDS
+struct cmd_list_element *maintenanceinfolist;
+#endif
+
+/* Chain containing all defined "maintenance print" subcommands. */
+
+#if MAINTENANCE_CMDS
+struct cmd_list_element *maintenanceprintlist;
+#endif
+
+struct cmd_list_element *setprintlist;
+
+struct cmd_list_element *showprintlist;
+
+struct cmd_list_element *setchecklist;
+
+struct cmd_list_element *showchecklist;
+
/* stdio stream that command input is being read from. */
FILE *instream;
char *current_directory;
/* The directory name is actually stored here (usually). */
-static char dirbuf[MAXPATHLEN];
-
-/* Nonzero if we should refrain from using an X window. */
-
-int inhibit_windows = 0;
+static char dirbuf[1024];
/* Function to call before reading a command, if nonzero.
The function receives two args: an input stream,
and a prompt string. */
-
-void (*window_hook) ();
+
+void (*window_hook) PARAMS ((FILE *, char *));
extern int frame_file_full_name;
+extern int mapped_symbol_files;
+extern int readnow_symbol_files;
-void free_command_lines ();
-char *gdb_read_line ();
-static void init_main ();
-static void init_cmd_lists ();
-void command_loop ();
-static void source_command ();
-static void print_gdb_version ();
+int epoch_interface;
+int xgdb_verbose;
/* gdb prints this when reading a command interactively */
static char *prompt;
allocated for it so far. */
char *line;
-int linesize;
+int linesize = 100;
+
+/* Baud rate specified for talking to serial target systems. Default
+ is left as a zero pointer, so targets can choose their own defaults. */
+
+char *baud_rate;
+
+/* Signal to catch ^Z typed while reading a command: SIGTSTP or SIGCONT. */
+
+#ifndef STOP_SIGNAL
+#ifdef SIGTSTP
+#define STOP_SIGNAL SIGTSTP
+static void stop_sig PARAMS ((int));
+#endif
+#endif
+
+/* Some System V have job control but not sigsetmask(). */
+#if !defined (HAVE_SIGSETMASK)
+#define HAVE_SIGSETMASK !defined (USG)
+#endif
+
+#if 0 == (HAVE_SIGSETMASK)
+#define sigsetmask(n)
+#endif
\f
/* This is how `error' returns to command level. */
jmp_buf to_top_level;
-void
+NORETURN void
return_to_top_level ()
{
quit_flag = 0;
immediate_quit = 0;
- clear_breakpoint_commands ();
- clear_momentary_breakpoints ();
- delete_current_display ();
- do_cleanups (0);
- longjmp (to_top_level, 1);
+ bpstat_clear_actions(stop_bpstat); /* Clear queued breakpoint commands */
+ disable_current_display ();
+ do_cleanups (ALL_CLEANUPS);
+ (NORETURN void) longjmp (to_top_level, 1);
}
-/* Call FUNC with arg ARG, catching any errors.
+/* Call FUNC with arg ARGS, catching any errors.
If there is no error, return the value returned by FUNC.
- If there is an error, return zero after printing ERRSTRING
- (which is in addition to the specific error message already printed). */
+ If there is an error, print ERRSTRING, print the specific error message,
+ then return zero. */
int
-catch_errors (func, arg, errstring)
- int (*func) ();
- int arg;
+catch_errors (func, args, errstring)
+ int (*func) PARAMS ((char *));
+ char *args;
char *errstring;
{
jmp_buf saved;
int val;
struct cleanup *saved_cleanup_chain;
+ char *saved_error_pre_print;
saved_cleanup_chain = save_cleanups ();
+ saved_error_pre_print = error_pre_print;
- bcopy (to_top_level, saved, sizeof (jmp_buf));
+ memcpy ((char *)saved, (char *)to_top_level, sizeof (jmp_buf));
+ error_pre_print = errstring;
if (setjmp (to_top_level) == 0)
- val = (*func) (arg);
+ val = (*func) (args);
else
- {
- fprintf (stderr, "%s\n", errstring);
- val = 0;
- }
+ val = 0;
restore_cleanups (saved_cleanup_chain);
- bcopy (saved, to_top_level, sizeof (jmp_buf));
+ error_pre_print = saved_error_pre_print;
+ memcpy ((char *)to_top_level, (char *)saved, sizeof (jmp_buf));
return val;
}
/* Handler for SIGHUP. */
static void
-disconnect ()
+disconnect (signo)
+int signo;
{
- kill_inferior_fast ();
+ catch_errors (quit_cover, NULL,
+ "Could not kill the program being debugged");
signal (SIGHUP, SIG_DFL);
kill (getpid (), SIGHUP);
}
+
+/* Just a little helper function for disconnect(). */
+
+static int
+quit_cover (s)
+char *s;
+{
+ caution = 0; /* Throw caution to the wind -- we're exiting.
+ This prevents asking the user dumb questions. */
+ quit_command((char *)0, 0);
+ return 0;
+}
\f
/* Clean up on error during a "source" command (or execution of a
- user-defined command).
- Close the file opened by the command
- and restore the previous input stream. */
+ user-defined command). */
static void
source_cleanup (stream)
FILE *stream;
{
- /* Instream may be 0; set to it when executing user-defined command. */
- if (instream)
- fclose (instream);
+ /* Restore the previous input stream. */
instream = stream;
}
+/* Read commands from STREAM. */
+static void
+read_command_file (stream)
+ FILE *stream;
+{
+ struct cleanup *cleanups;
+
+ cleanups = make_cleanup (source_cleanup, instream);
+ instream = stream;
+ command_loop ();
+ do_cleanups (cleanups);
+}
\f
int
-main (argc, argv, envp)
+main (argc, argv)
int argc;
char **argv;
- char **envp;
{
- extern void request_quit ();
int count;
- int inhibit_gdbinit = 0;
- int quiet = 0;
- int batch = 0;
+ static int quiet = 0;
+ static int batch = 0;
+
+ /* Pointers to various arguments from command line. */
+ char *symarg = NULL;
+ char *execarg = NULL;
+ char *corearg = NULL;
+ char *cdarg = NULL;
+ char *ttyarg = NULL;
+
+ /* Pointers to all arguments of +command option. */
+ char **cmdarg;
+ /* Allocated size of cmdarg. */
+ int cmdsize;
+ /* Number of elements of cmdarg used. */
+ int ncmd;
+
+ /* Indices of all arguments of +directory option. */
+ char **dirarg;
+ /* Allocated size. */
+ int dirsize;
+ /* Number of elements used. */
+ int ndir;
+
+ struct stat homebuf, cwdbuf;
+ char *homedir, *homeinit;
+
register int i;
+ /* This needs to happen before the first use of malloc. */
+ init_malloc ((PTR) NULL);
+
+#if defined (ALIGN_STACK_ON_STARTUP)
+ i = (int) &count & 0x3;
+ if (i != 0)
+ alloca (4 - i);
+#endif
+
+ /* If error() is called from initialization code, just exit */
+ if (setjmp (to_top_level)) {
+ exit(1);
+ }
+
+ cmdsize = 1;
+ cmdarg = (char **) xmalloc (cmdsize * sizeof (*cmdarg));
+ ncmd = 0;
+ dirsize = 1;
+ dirarg = (char **) xmalloc (dirsize * sizeof (*dirarg));
+ ndir = 0;
+
quit_flag = 0;
- linesize = 100;
line = (char *) xmalloc (linesize);
+ line[0] = '\0'; /* Terminate saved (now empty) cmd line */
instream = stdin;
- getwd (dirbuf);
+ getcwd (dirbuf, sizeof (dirbuf));
current_directory = dirbuf;
#ifdef SET_STACK_LIMIT_HUGE
}
#endif /* SET_STACK_LIMIT_HUGE */
- /* Look for flag arguments. */
+ /* Parse arguments and options. */
+ {
+ int c;
+ static int print_help;
+ /* When var field is 0, use flag field to record the equivalent
+ short option (or arbitrary numbers starting at 10 for those
+ with no equivalent). */
+ static struct option long_options[] =
+ {
+ {"readnow", no_argument, &readnow_symbol_files, 1},
+ {"r", no_argument, &readnow_symbol_files, 1},
+ {"mapped", no_argument, &mapped_symbol_files, 1},
+ {"m", no_argument, &mapped_symbol_files, 1},
+ {"quiet", no_argument, &quiet, 1},
+ {"q", no_argument, &quiet, 1},
+ {"silent", no_argument, &quiet, 1},
+ {"nx", no_argument, &inhibit_gdbinit, 1},
+ {"n", no_argument, &inhibit_gdbinit, 1},
+ {"batch", no_argument, &batch, 1},
+ {"epoch", no_argument, &epoch_interface, 1},
+ {"fullname", no_argument, &frame_file_full_name, 1},
+ {"f", no_argument, &frame_file_full_name, 1},
+ {"help", no_argument, &print_help, 1},
+ {"se", required_argument, 0, 10},
+ {"symbols", required_argument, 0, 's'},
+ {"s", required_argument, 0, 's'},
+ {"exec", required_argument, 0, 'e'},
+ {"e", required_argument, 0, 'e'},
+ {"core", required_argument, 0, 'c'},
+ {"c", required_argument, 0, 'c'},
+ {"command", required_argument, 0, 'x'},
+ {"x", required_argument, 0, 'x'},
+ {"directory", required_argument, 0, 'd'},
+ {"cd", required_argument, 0, 11},
+ {"tty", required_argument, 0, 't'},
+ {"baud", required_argument, 0, 'b'},
+ {"b", required_argument, 0, 'b'},
+/* Allow machine descriptions to add more options... */
+#ifdef ADDITIONAL_OPTIONS
+ ADDITIONAL_OPTIONS
+#endif
+ {0, no_argument, 0, 0},
+ };
- for (i = 1; i < argc; i++)
- {
- if (!strcmp (argv[i], "-q") || !strcmp (argv[i], "-quiet"))
- quiet = 1;
- else if (!strcmp (argv[i], "-nx"))
- inhibit_gdbinit = 1;
- else if (!strcmp (argv[i], "-nw"))
- inhibit_windows = 1;
- else if (!strcmp (argv[i], "-batch"))
- batch = 1, quiet = 1;
- else if (!strcmp (argv[i], "-fullname"))
- frame_file_full_name = 1;
- else if (argv[i][0] == '-')
- i++;
- }
+ while (1)
+ {
+ int option_index;
- /* Run the init function of each source file */
+ c = getopt_long_only (argc, argv, "",
+ long_options, &option_index);
+ if (c == EOF)
+ break;
- init_cmd_lists (); /* This needs to be done first */
- init_all_files ();
- init_main (); /* But that omits this file! Do it now */
+ /* Long option that takes an argument. */
+ if (c == 0 && long_options[option_index].flag == 0)
+ c = long_options[option_index].val;
- signal (SIGINT, request_quit);
- signal (SIGQUIT, SIG_IGN);
- if (signal (SIGHUP, SIG_IGN) != SIG_IGN)
- signal (SIGHUP, disconnect);
+ switch (c)
+ {
+ case 0:
+ /* Long option that just sets a flag. */
+ break;
+ case 10:
+ symarg = optarg;
+ execarg = optarg;
+ break;
+ case 11:
+ cdarg = optarg;
+ break;
+ case 's':
+ symarg = optarg;
+ break;
+ case 'e':
+ execarg = optarg;
+ break;
+ case 'c':
+ corearg = optarg;
+ break;
+ case 'x':
+ cmdarg[ncmd++] = optarg;
+ if (ncmd >= cmdsize)
+ {
+ cmdsize *= 2;
+ cmdarg = (char **) xrealloc ((char *)cmdarg,
+ cmdsize * sizeof (*cmdarg));
+ }
+ break;
+ case 'd':
+ dirarg[ndir++] = optarg;
+ if (ndir >= dirsize)
+ {
+ dirsize *= 2;
+ dirarg = (char **) xrealloc ((char *)dirarg,
+ dirsize * sizeof (*dirarg));
+ }
+ break;
+ case 't':
+ ttyarg = optarg;
+ break;
+ case 'q':
+ quiet = 1;
+ break;
+ case 'b':
+ baud_rate = optarg;
+ break;
+#ifdef ADDITIONAL_OPTION_CASES
+ ADDITIONAL_OPTION_CASES
+#endif
+ case '?':
+ fprintf (stderr,
+ "Use `%s --help' for a complete list of options.\n",
+ argv[0]);
+ exit (1);
+ }
+ }
- if (!quiet)
- print_gdb_version ();
+ if (print_help)
+ {
+ print_gdb_version(stderr);
+ fputs ("\n\
+This is the GNU debugger. Usage:\n\
+ gdb [options] [executable-file [core-file or process-id]]\n\
+Options:\n\
+ -help Print this message.\n\
+ -quiet Do not print version number on startup.\n\
+ -fullname Output information used by emacs-GDB interface.\n\
+ -epoch Output information used by epoch emacs-GDB interface.\n\
+ -batch Exit after processing options.\n\
+ -nx Do not read .gdbinit file.\n\
+ -tty=TTY Use TTY for input/output by the program being debugged.\n\
+ -cd=DIR Change current directory to DIR.\n\
+ -directory=DIR Search for source files in DIR.\n\
+ -command=FILE Execute GDB commands from FILE.\n\
+ -symbols=SYMFILE Read symbols from SYMFILE.\n\
+ -exec=EXECFILE Use EXECFILE as the executable.\n\
+ -se=FILE Use FILE as symbol file and executable file.\n\
+ -core=COREFILE Analyze the core dump COREFILE.\n\
+ -b BAUDRATE Set serial port baud rate used for remote debugging.\n\
+ -mapped Use mapped symbol files if supported on this system.\n\
+ -readnow Fully read symbol files on first access.\n\
+", stderr);
+#ifdef ADDITIONAL_OPTION_HELP
+ fputs (ADDITIONAL_OPTION_HELP, stderr);
+#endif
+ fputs ("\n\
+For more information, type \"help\" from within GDB, or consult the\n\
+GDB manual (available as on-line info or a printed manual).\n", stderr);
+ /* Exiting after printing this message seems like
+ the most useful thing to do. */
+ exit (0);
+ }
+
+ /* OK, that's all the options. The other arguments are filenames. */
+ count = 0;
+ for (; optind < argc; optind++)
+ switch (++count)
+ {
+ case 1:
+ symarg = argv[optind];
+ execarg = argv[optind];
+ break;
+ case 2:
+ corearg = argv[optind];
+ break;
+ case 3:
+ fprintf (stderr,
+ "Excess command line arguments ignored. (%s%s)\n",
+ argv[optind], (optind == argc - 1) ? "" : " ...");
+ break;
+ }
+ if (batch)
+ quiet = 1;
+ }
- /* Process the command line arguments. */
+ /* Run the init function of each source file */
+
+ initialize_cmd_lists (); /* This needs to be done first */
+ initialize_all_files ();
+ initialize_main (); /* But that omits this file! Do it now */
+ init_signals ();
- count = 0;
- for (i = 1; i < argc; i++)
+ if (!quiet)
{
- register char *arg = argv[i];
- /* Args starting with - say what to do with the following arg
- as a filename. */
- if (arg[0] == '-')
+ /* Print all the junk at the top, with trailing "..." if we are about
+ to read a symbol file (possibly slowly). */
+ print_gnu_advertisement ();
+ print_gdb_version (stdout);
+ if (symarg)
+ printf_filtered ("..");
+ wrap_here("");
+ fflush (stdout); /* Force to screen during slow operations */
+ }
+
+ error_pre_print = "\n\n";
+ /* We may get more than one warning, don't double space all of them... */
+ warning_pre_print = "\nwarning: ";
+
+ /* We need a default language for parsing expressions, so simple things like
+ "set width 0" won't fail if no language is explicitly set in a config file
+ or implicitly set by reading an executable during startup. */
+ set_language (language_c);
+ expected_language = current_language; /* don't warn about the change. */
+
+ /* Read and execute $HOME/.gdbinit file, if it exists. This is done
+ *before* all the command line arguments are processed; it sets
+ global parameters, which are independent of what file you are
+ debugging or what directory you are in. */
+ homedir = getenv ("HOME");
+ if (homedir)
+ {
+ homeinit = (char *) alloca (strlen (getenv ("HOME")) +
+ strlen (gdbinit) + 10);
+ strcpy (homeinit, getenv ("HOME"));
+ strcat (homeinit, "/");
+ strcat (homeinit, gdbinit);
+ if (!inhibit_gdbinit && access (homeinit, R_OK) == 0)
{
- extern void exec_file_command (), symbol_file_command ();
- extern void core_file_command (), directory_command ();
- extern void tty_command ();
-
- if (!strcmp (arg, "-q") || !strcmp (arg, "-nx")
- || !strcmp (arg, "-quiet") || !strcmp (arg, "-batch")
- || !strcmp (arg, "-fullname"))
- /* Already processed above */
- continue;
-
- if (++i == argc)
- fprintf (stderr, "No argument follows \"%s\".\n", arg);
if (!setjmp (to_top_level))
- {
- /* -s foo: get syms from foo. -e foo: execute foo.
- -se foo: do both with foo. -c foo: use foo as core dump. */
- if (!strcmp (arg, "-se"))
- {
- exec_file_command (argv[i], !batch);
- symbol_file_command (argv[i], !batch);
- }
- else if (!strcmp (arg, "-s") || !strcmp (arg, "-symbols"))
- symbol_file_command (argv[i], !batch);
- else if (!strcmp (arg, "-e") || !strcmp (arg, "-exec"))
- exec_file_command (argv[i], !batch);
- else if (!strcmp (arg, "-c") || !strcmp (arg, "-core"))
- core_file_command (argv[i], !batch);
- /* -x foo: execute commands from foo. */
- else if (!strcmp (arg, "-x") || !strcmp (arg, "-command")
- || !strcmp (arg, "-commands"))
- source_command (argv[i]);
- /* -d foo: add directory `foo' to source-file directory
- search-list */
- else if (!strcmp (arg, "-d") || !strcmp (arg, "-dir")
- || !strcmp (arg, "-directory"))
- directory_command (argv[i], 0);
- /* -cd FOO: specify current directory as FOO.
- GDB remembers the precise string FOO as the dirname. */
- else if (!strcmp (arg, "-cd"))
- {
- int len = strlen (argv[i]);
- current_directory = argv[i];
- if (len > 1 && current_directory[len - 1] == '/')
- current_directory = savestring (current_directory, len-1);
- chdir (current_directory);
- init_source_path ();
- }
- /* -t /def/ttyp1: use /dev/ttyp1 for inferior I/O. */
- else if (!strcmp (arg, "-t") || !strcmp (arg, "-tty"))
- tty_command (argv[i], 0);
- else
- error ("Unknown command-line switch: \"%s\"\n", arg);
- }
+ source_command (homeinit, 0);
}
- else
+ do_cleanups (ALL_CLEANUPS);
+
+ /* Do stats; no need to do them elsewhere since we'll only
+ need them if homedir is set. Make sure that they are
+ zero in case one of them fails (this guarantees that they
+ won't match if either exists). */
+
+ memset (&homebuf, 0, sizeof (struct stat));
+ memset (&cwdbuf, 0, sizeof (struct stat));
+
+ stat (homeinit, &homebuf);
+ stat (gdbinit, &cwdbuf); /* We'll only need this if
+ homedir was set. */
+ }
+
+ /* Now perform all the actions indicated by the arguments. */
+ if (cdarg != NULL)
+ {
+ if (!setjmp (to_top_level))
{
- /* Args not thus accounted for
- are treated as, first, the symbol/executable file
- and, second, the core dump file. */
- count++;
- if (!setjmp (to_top_level))
- switch (count)
- {
- case 1:
- exec_file_command (arg, !batch);
- symbol_file_command (arg, !batch);
- break;
-
- case 2:
- core_file_command (arg, !batch);
- break;
-
- case 3:
- fprintf (stderr, "Excess command line args ignored. (%s%s)\n",
- arg, (i == argc - 1) ? "" : " ...");
- }
+ cd_command (cdarg, 0);
+ init_source_path ();
}
}
+ do_cleanups (ALL_CLEANUPS);
+
+ for (i = 0; i < ndir; i++)
+ if (!setjmp (to_top_level))
+ directory_command (dirarg[i], 0);
+ free ((PTR)dirarg);
+ do_cleanups (ALL_CLEANUPS);
- /* Read init file, if it exists in home directory */
- if (getenv ("HOME"))
+ if (execarg != NULL
+ && symarg != NULL
+ && STREQ (execarg, symarg))
+ {
+ /* The exec file and the symbol-file are the same. If we can't open
+ it, better only print one error message. */
+ if (!setjmp (to_top_level))
+ {
+ exec_file_command (execarg, !batch);
+ symbol_file_command (symarg, 0);
+ }
+ }
+ else
{
- char *s;
- s = (char *) xmalloc (strlen (getenv ("HOME")) + 10);
- strcpy (s, getenv ("HOME"));
- strcat (s, "/.gdbinit");
- if (!inhibit_gdbinit && access (s, R_OK) == 0)
+ if (execarg != NULL)
if (!setjmp (to_top_level))
- source_command (s);
+ exec_file_command (execarg, !batch);
+ if (symarg != NULL)
+ if (!setjmp (to_top_level))
+ symbol_file_command (symarg, 0);
}
+ do_cleanups (ALL_CLEANUPS);
+
+ /* After the symbol file has been read, print a newline to get us
+ beyond the copyright line... But errors should still set off
+ the error message with a (single) blank line. */
+ if (!quiet)
+ printf_filtered ("\n");
+ error_pre_print = "\n";
+ warning_pre_print = "\nwarning: ";
- /* Read init file, if it exists in current directory. */
- if (!inhibit_gdbinit && access (".gdbinit", R_OK) == 0)
+ if (corearg != NULL)
if (!setjmp (to_top_level))
- source_command (".gdbinit");
+ core_file_command (corearg, !batch);
+ else if (isdigit (corearg[0]) && !setjmp (to_top_level))
+ attach_command (corearg, !batch);
+ do_cleanups (ALL_CLEANUPS);
+
+ if (ttyarg != NULL)
+ if (!setjmp (to_top_level))
+ tty_command (ttyarg, !batch);
+ do_cleanups (ALL_CLEANUPS);
+
+#ifdef ADDITIONAL_OPTION_HANDLER
+ ADDITIONAL_OPTION_HANDLER;
+#endif
+
+ /* Error messages should no longer be distinguished with extra output. */
+ error_pre_print = 0;
+ warning_pre_print = "warning: ";
+
+ /* Read the .gdbinit file in the current directory, *if* it isn't
+ the same as the $HOME/.gdbinit file (it should exist, also). */
+
+ if (!homedir
+ || memcmp ((char *) &homebuf, (char *) &cwdbuf, sizeof (struct stat)))
+ if (!inhibit_gdbinit && access (gdbinit, R_OK) == 0)
+ {
+ if (!setjmp (to_top_level))
+ source_command (gdbinit, 0);
+ }
+ do_cleanups (ALL_CLEANUPS);
+
+ for (i = 0; i < ncmd; i++)
+ {
+ if (!setjmp (to_top_level))
+ {
+ if (cmdarg[i][0] == '-' && cmdarg[i][1] == '\0')
+ read_command_file (stdin);
+ else
+ source_command (cmdarg[i], !batch);
+ do_cleanups (ALL_CLEANUPS);
+ }
+ }
+ free ((PTR)cmdarg);
+
+ /* Read in the old history after all the command files have been read. */
+ initialize_history();
if (batch)
- fatal ("Attempt to read commands from stdin in batch mode.");
+ {
+ /* We have hit the end of the batch file. */
+ exit (0);
+ }
- if (!quiet)
- printf ("Type \"help\" for a list of commands.\n");
+ /* Do any host- or target-specific hacks. This is used for i960 targets
+ to force the user to set a nindy target and spec its parameters. */
+
+#ifdef BEFORE_MAIN_LOOP_HOOK
+ BEFORE_MAIN_LOOP_HOOK;
+#endif
/* The command loop. */
while (1)
{
if (!setjmp (to_top_level))
- command_loop ();
- clearerr (stdin); /* Don't get hung if C-d is typed. */
+ {
+ do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */
+ command_loop ();
+ quit_command ((char *)0, instream == stdin);
+ }
+ }
+ /* No exit -- exit is through quit_command. */
+}
+
+void
+execute_user_command (c, args)
+ struct cmd_list_element *c;
+ char *args;
+{
+ register struct command_line *cmdlines;
+ struct cleanup *old_chain;
+
+ if (args)
+ error ("User-defined commands cannot take arguments.");
+
+ cmdlines = c->user_commands;
+ if (cmdlines == 0)
+ /* Null command */
+ return;
+
+ /* Set the instream to 0, indicating execution of a
+ user-defined function. */
+ old_chain = make_cleanup (source_cleanup, instream);
+ instream = (FILE *) 0;
+ while (cmdlines)
+ {
+ execute_command (cmdlines->line, 0);
+ cmdlines = cmdlines->next;
}
+ do_cleanups (old_chain);
}
/* Execute the line P as a command.
int from_tty;
{
register struct cmd_list_element *c;
- register struct command_line *cmdlines;
+ register enum language flang;
+ static int warned = 0;
free_all_values ();
+
+ /* This can happen when command_line_input hits end of file. */
+ if (p == NULL)
+ return;
+
while (*p == ' ' || *p == '\t') p++;
if (*p)
{
- c = lookup_cmd (&p, cmdlist, "", 0);
- if (c->function == 0)
+ char *arg;
+
+ c = lookup_cmd (&p, cmdlist, "", 0, 1);
+ /* Pass null arg rather than an empty one. */
+ arg = *p ? p : 0;
+
+ /* If this command has been hooked, run the hook first. */
+ if (c->hook)
+ execute_user_command (c->hook, (char *)0);
+
+ if (c->class == class_user)
+ execute_user_command (c, arg);
+ else if (c->type == set_cmd || c->type == show_cmd)
+ do_setshow_command (arg, from_tty & caution, c);
+ else if (c->function.cfunc == NO_FUNCTION)
error ("That is not a command, just a help topic.");
- else if (c->class == (int) class_user)
- {
- struct cleanup *old_chain;
-
- if (*p)
- error ("User-defined commands cannot take arguments.");
- cmdlines = (struct command_line *) c->function;
- if (cmdlines == (struct command_line *) 0)
- /* Null command */
- return;
-
- /* Set the instream to 0, indicating execution of a
- user-defined function. */
- old_chain = make_cleanup (source_cleanup, instream);
- instream = (FILE *) 0;
- while (cmdlines)
- {
- execute_command (cmdlines->line, 0);
- cmdlines = cmdlines->next;
- }
- do_cleanups (old_chain);
- }
else
- /* Pass null arg rather than an empty one. */
- (*c->function) (*p ? p : 0, from_tty);
+ (*c->function.cfunc) (arg, from_tty & caution);
+ }
+
+ /* Tell the user if the language has changed (except first time). */
+ if (current_language != expected_language)
+ {
+ if (language_mode == language_mode_auto) {
+ language_info (1); /* Print what changed. */
}
+ warned = 0;
+ }
+
+ /* Warn the user if the working language does not match the
+ language of the current frame. Only warn the user if we are
+ actually running the program, i.e. there is a stack. */
+ /* FIXME: This should be cacheing the frame and only running when
+ the frame changes. */
+ if (target_has_stack)
+ {
+ flang = get_frame_language ();
+ if (!warned
+ && flang != language_unknown
+ && flang != current_language->la_language)
+ {
+ printf_filtered ("%s\n", lang_frame_mismatch_warn);
+ warned = 1;
+ }
+ }
}
+/* ARGSUSED */
static void
-do_nothing ()
+command_loop_marker (foo)
+ int foo;
{
}
/* Read commands from `instream' and execute them
- until end of file. */
-void
+ until end of file or error reading instream. */
+static void
command_loop ()
{
struct cleanup *old_chain;
+ char *command;
+ int stdin_is_tty = ISATTY (stdin);
+
while (!feof (instream))
{
if (window_hook && instream == stdin)
(*window_hook) (instream, prompt);
quit_flag = 0;
- old_chain = make_cleanup (do_nothing, 0);
- execute_command (gdb_read_line (instream == stdin ? prompt : 0,
- instream == stdin),
- instream == stdin);
+ if (instream == stdin && stdin_is_tty)
+ reinitialize_more_filter ();
+ old_chain = make_cleanup (command_loop_marker, 0);
+ command = command_line_input (instream == stdin ? prompt : (char *) NULL,
+ instream == stdin);
+ if (command == 0)
+ return;
+ execute_command (command, instream == stdin);
/* Do any commands attached to breakpoint we stopped at. */
- do_breakpoint_commands ();
+ bpstat_do_actions (&stop_bpstat);
do_cleanups (old_chain);
}
}
\f
-#ifdef SIGTSTP
+/* Commands call this if they do not want to be repeated by null lines. */
+
+void
+dont_repeat ()
+{
+ /* If we aren't reading from standard input, we are saving the last
+ thing read from stdin in line and don't want to delete it. Null lines
+ won't repeat here in any case. */
+ if (instream == stdin)
+ *line = 0;
+}
+\f
+/* Read a line from the stream "instream" without command line editing.
+
+ It prints PRROMPT once at the start.
+ Action is compatible with "readline", e.g. space for the result is
+ malloc'd and should be freed by the caller.
+
+ A NULL return means end of file. */
+char *
+gdb_readline (prrompt)
+ char *prrompt;
+{
+ int c;
+ char *result;
+ int input_index = 0;
+ int result_size = 80;
+
+ if (prrompt)
+ {
+ /* Don't use a _filtered function here. It causes the assumed
+ character position to be off, since the newline we read from
+ the user is not accounted for. */
+ fputs (prrompt, stdout);
+ fflush (stdout);
+ }
+
+ result = (char *) xmalloc (result_size);
+
+ while (1)
+ {
+ /* Read from stdin if we are executing a user defined command.
+ This is the right thing for prompt_for_continue, at least. */
+ c = fgetc (instream ? instream : stdin);
+
+ if (c == EOF)
+ {
+ free (result);
+ return NULL;
+ }
+
+ if (c == '\n')
+ break;
+
+ result[input_index++] = c;
+ while (input_index >= result_size)
+ {
+ result_size *= 2;
+ result = (char *) xrealloc (result, result_size);
+ }
+ }
+
+ result[input_index++] = '\0';
+ return result;
+}
+
+/* Variables which control command line editing and history
+ substitution. These variables are given default values at the end
+ of this file. */
+static int command_editing_p;
+static int history_expansion_p;
+static int write_history_p;
+static int history_size;
+static char *history_filename;
+
+/* Variables which are necessary for fancy command line editing. */
+char *gdb_completer_word_break_characters =
+ " \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,-";
+
+/* When completing on command names, we remove '-' from the list of
+ word break characters, since we use it in command names. If the
+ readline library sees one in any of the current completion strings,
+ it thinks that the string needs to be quoted and automatically supplies
+ a leading quote. */
+char *gdb_completer_command_word_break_characters =
+ " \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,";
+
+/* Characters that can be used to quote completion strings. Note that we
+ can't include '"' because the gdb C parser treats such quoted sequences
+ as strings. */
+char *gdb_completer_quote_characters =
+ "'";
+
+/* Functions that are used as part of the fancy command line editing. */
+
+/* This can be used for functions which don't want to complete on symbols
+ but don't want to complete on anything else either. */
+/* ARGSUSED */
+char **
+noop_completer (text)
+ char *text;
+{
+ return NULL;
+}
+
+/* Generate symbol names one by one for the completer. Each time we are
+ called return another potential completion to the caller.
+
+ TEXT is what we expect the symbol to start with.
+
+ MATCHES is the number of matches that have currently been collected from
+ calling this completion function. When zero, then we need to initialize,
+ otherwise the initialization has already taken place and we can just
+ return the next potential completion string.
+
+ Returns NULL if there are no more completions, else a pointer to a string
+ which is a possible completion.
+
+ RL_LINE_BUFFER is available to be looked at; it contains the entire text
+ of the line. RL_POINT is the offset in that line of the cursor. You
+ should pretend that the line ends at RL_POINT. */
+
+static char *
+symbol_completion_function (text, matches)
+ char *text;
+ int matches;
+{
+ static char **list = (char **)NULL; /* Cache of completions */
+ static int index; /* Next cached completion */
+ char *output = NULL;
+ char *tmp_command, *p;
+ struct cmd_list_element *c, *result_list;
+ extern char *rl_line_buffer;
+ extern int rl_point;
+
+ if (matches == 0)
+ {
+ /* The caller is beginning to accumulate a new set of completions, so
+ we need to find all of them now, and cache them for returning one at
+ a time on future calls. */
+
+ if (list)
+ {
+ /* Free the storage used by LIST, but not by the strings inside.
+ This is because rl_complete_internal () frees the strings. */
+ free ((PTR)list);
+ }
+ list = 0;
+ index = 0;
+
+ /* Choose the default set of word break characters to break completions.
+ If we later find out that we are doing completions on command strings
+ (as opposed to strings supplied by the individual command completer
+ functions, which can be any string) then we will switch to the
+ special word break set for command strings, which leaves out the
+ '-' character used in some commands. */
+
+ rl_completer_word_break_characters =
+ gdb_completer_word_break_characters;
+
+ /* Decide whether to complete on a list of gdb commands or on symbols. */
+ tmp_command = (char *) alloca (rl_point + 1);
+ p = tmp_command;
+
+ strncpy (tmp_command, rl_line_buffer, rl_point);
+ tmp_command[rl_point] = '\0';
+
+ if (rl_point == 0)
+ {
+ /* An empty line we want to consider ambiguous; that is, it
+ could be any command. */
+ c = (struct cmd_list_element *) -1;
+ result_list = 0;
+ }
+ else
+ {
+ c = lookup_cmd_1 (&p, cmdlist, &result_list, 1);
+ }
+
+ /* Move p up to the next interesting thing. */
+ while (*p == ' ' || *p == '\t')
+ {
+ p++;
+ }
+
+ if (!c)
+ {
+ /* He's typed something unrecognizable. Sigh. */
+ list = NULL;
+ }
+ else if (c == (struct cmd_list_element *) -1)
+ {
+ /* If we didn't recognize everything up to the thing that
+ needs completing, and we don't know what command it is
+ yet, we are in trouble. */
+
+ if (p + strlen(text) != tmp_command + rl_point)
+ {
+ /* This really should not produce an error. Better would
+ be to pretend to hit RETURN here; this would produce a
+ response like "Ambiguous command: foo, foobar, etc",
+ and leave the line available for re-entry with ^P.
+ Instead, this error blows away the user's typed input
+ without any way to get it back. */
+ error (" Unrecognized command.");
+ }
+
+ /* He's typed something ambiguous. This is easier. */
+ if (result_list)
+ {
+ list = complete_on_cmdlist (*result_list->prefixlist, text);
+ }
+ else
+ {
+ list = complete_on_cmdlist (cmdlist, text);
+ }
+ rl_completer_word_break_characters =
+ gdb_completer_command_word_break_characters;
+ }
+ else
+ {
+ /* If we've gotten this far, gdb has recognized a full
+ command. There are several possibilities:
+
+ 1) We need to complete on the command.
+ 2) We need to complete on the possibilities coming after
+ the command.
+ 2) We need to complete the text of what comes after the
+ command. */
+
+ if (!*p && *text)
+ {
+ /* Always (might be longer versions of thie command). */
+ list = complete_on_cmdlist (result_list, text);
+ rl_completer_word_break_characters =
+ gdb_completer_command_word_break_characters;
+ }
+ else if (!*p && !*text)
+ {
+ if (c->prefixlist)
+ {
+ list = complete_on_cmdlist (*c->prefixlist, "");
+ rl_completer_word_break_characters =
+ gdb_completer_command_word_break_characters;
+ }
+ else
+ {
+ list = (*c->completer) ("");
+ }
+ }
+ else
+ {
+ if (c->prefixlist && !c->allow_unknown)
+ {
+ /* Something like "info adsfkdj". But error() is not the
+ proper response; just return no completions instead. */
+ list = NULL;
+ }
+ else
+ {
+ list = (*c->completer) (text);
+ }
+ }
+ }
+ }
+
+ /* If we found a list of potential completions during initialization then
+ dole them out one at a time. The vector of completions is NULL
+ terminated, so after returning the last one, return NULL (and continue
+ to do so) each time we are called after that, until a new list is
+ available. */
+
+ if (list)
+ {
+ output = list[index];
+ if (output)
+ {
+ index++;
+ }
+ }
+
+ return (output);
+}
+
+/* Skip over a possibly quoted word (as defined by the quote characters
+ and word break characters the completer uses). Returns pointer to the
+ location after the "word". */
+
+char *
+skip_quoted (str)
+ char *str;
+{
+ char quote_char = '\0';
+ char *scan;
+
+ for (scan = str; *scan != '\0'; scan++)
+ {
+ if (quote_char != '\0')
+ {
+ /* Ignore everything until the matching close quote char */
+ if (*scan == quote_char)
+ {
+ /* Found matching close quote. */
+ scan++;
+ break;
+ }
+ }
+ else if (strchr (gdb_completer_quote_characters, *scan))
+ {
+ /* Found start of a quoted string. */
+ quote_char = *scan;
+ }
+ else if (strchr (gdb_completer_word_break_characters, *scan))
+ {
+ break;
+ }
+ }
+ return (scan);
+}
+
+\f
+#ifdef STOP_SIGNAL
static void
-stop_sig ()
+stop_sig (signo)
+int signo;
{
+#if STOP_SIGNAL == SIGTSTP
signal (SIGTSTP, SIG_DFL);
sigsetmask (0);
kill (getpid (), SIGTSTP);
signal (SIGTSTP, stop_sig);
+#else
+ signal (STOP_SIGNAL, stop_sig);
+#endif
printf ("%s", prompt);
fflush (stdout);
/* Forget about any previous command -- null line now will do nothing. */
- *line = 0;
+ dont_repeat ();
}
-#endif /* SIGTSTP */
-
-/* Commands call this if they do not want to be repeated by null lines. */
+#endif /* STOP_SIGNAL */
-void
-dont_repeat ()
+/* Initialize signal handlers. */
+static void
+do_nothing (signo)
+int signo;
{
- *line = 0;
}
+static void
+init_signals ()
+{
+ signal (SIGINT, request_quit);
+
+ /* If we initialize SIGQUIT to SIG_IGN, then the SIG_IGN will get
+ passed to the inferior, which we don't want. It would be
+ possible to do a "signal (SIGQUIT, SIG_DFL)" after we fork, but
+ on BSD4.3 systems using vfork, that can affect the
+ GDB process as well as the inferior (the signal handling tables
+ might be in memory, shared between the two). Since we establish
+ a handler for SIGQUIT, when we call exec it will set the signal
+ to SIG_DFL for us. */
+ signal (SIGQUIT, do_nothing);
+ if (signal (SIGHUP, do_nothing) != SIG_IGN)
+ signal (SIGHUP, disconnect);
+ signal (SIGFPE, float_handler);
+
+#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
+ signal (SIGWINCH, SIGWINCH_HANDLER);
+#endif
+}
+\f
/* Read one line from the command input stream `instream'
- into the buffer `line' (whose current length is `linesize').
+ into the local static buffer `linebuffer' (whose current length
+ is `linelength').
The buffer is made bigger as necessary.
- Returns the address of the start of the line. */
+ Returns the address of the start of the line.
+
+ NULL is returned for end of file.
+
+ *If* the instream == stdin & stdin is a terminal, the line read
+ is copied into the file line saver (global var char *line,
+ length linesize) so that it can be duplicated.
+
+ This routine either uses fancy command line editing or
+ simple input as the user has requested. */
char *
-gdb_read_line (prompt, repeat)
- char *prompt;
+command_line_input (prrompt, repeat)
+ char *prrompt;
int repeat;
{
- register char *p = line;
- register char *p1;
+ static char *linebuffer = 0;
+ static unsigned linelength = 0;
+ register char *p;
+ char *p1;
+ char *rl;
+ char *local_prompt = prrompt;
register int c;
char *nline;
+ char got_eof = 0;
+
+ if (linebuffer == 0)
+ {
+ linelength = 80;
+ linebuffer = (char *) xmalloc (linelength);
+ }
+
+ p = linebuffer;
/* Control-C quits instantly if typed while in this loop
since it should not wait until the user types a newline. */
immediate_quit++;
-#ifdef SIGTSTP
- signal (SIGTSTP, stop_sig);
+#ifdef STOP_SIGNAL
+ signal (STOP_SIGNAL, stop_sig);
#endif
- if (prompt)
- {
- printf (prompt);
- fflush (stdout);
- }
-
while (1)
{
- c = fgetc (instream);
- if (c == -1 || c == '\n')
- break;
- /* Ignore backslash-newline; keep adding to the same line. */
- else if (c == '\\')
+ /* Reports are that some Sys V's don't flush stdout/err on reads
+ from stdin, when stdin/out are sockets rather than ttys. So we
+ have to do it ourselves, to make emacs-gdb and xxgdb work.
+ On other machines, doing this once per input should be a cheap nop. */
+ fflush (stdout);
+ fflush (stderr);
+
+ /* Don't use fancy stuff if not talking to stdin. */
+ if (command_editing_p && instream == stdin
+ && ISATTY (instream))
+ rl = readline (local_prompt);
+ else
+ rl = gdb_readline (local_prompt);
+
+ if (!rl || rl == (char *) EOF)
{
- int c1 = fgetc (instream);
- if (c1 == '\n')
- continue;
- else
- ungetc (c1, instream);
+ got_eof = 1;
+ break;
}
-
- if (p - line == linesize - 1)
+ if (strlen(rl) + 1 + (p - linebuffer) > linelength)
{
- linesize *= 2;
- nline = (char *) xrealloc (line, linesize);
- p += nline - line;
- line = nline;
+ linelength = strlen(rl) + 1 + (p - linebuffer);
+ nline = (char *) xrealloc (linebuffer, linelength);
+ p += nline - linebuffer;
+ linebuffer = nline;
}
- *p++ = c;
- }
+ p1 = rl;
+ /* Copy line. Don't copy null at end. (Leaves line alone
+ if this was just a newline) */
+ while (*p1)
+ *p++ = *p1++;
-#ifdef SIGTSTP
- signal (SIGTSTP, SIG_DFL);
+ free (rl); /* Allocated in readline. */
+
+ if (p == linebuffer || *(p - 1) != '\\')
+ break;
+
+ p--; /* Put on top of '\'. */
+ local_prompt = (char *) 0;
+ }
+
+#ifdef STOP_SIGNAL
+ signal (STOP_SIGNAL, SIG_DFL);
#endif
immediate_quit--;
- /* If we just got an empty line, and that is supposed
- to repeat the previous command, leave the last input unchanged. */
- if (p == line && repeat)
- return line;
+ if (got_eof)
+ return NULL;
+
+ /* Do history expansion if that is wished. */
+ if (history_expansion_p && instream == stdin
+ && ISATTY (instream))
+ {
+ char *history_value;
+ int expanded;
+
+ *p = '\0'; /* Insert null now. */
+ expanded = history_expand (linebuffer, &history_value);
+ if (expanded)
+ {
+ /* Print the changes. */
+ printf ("%s\n", history_value);
+
+ /* If there was an error, call this function again. */
+ if (expanded < 0)
+ {
+ free (history_value);
+ return command_line_input (prrompt, repeat);
+ }
+ if (strlen (history_value) > linelength)
+ {
+ linelength = strlen (history_value) + 1;
+ linebuffer = (char *) xrealloc (linebuffer, linelength);
+ }
+ strcpy (linebuffer, history_value);
+ p = linebuffer + strlen(linebuffer);
+ free (history_value);
+ }
+ }
- /* If line is a comment, clear it out. */
- p1 = line;
- while ((c = *p1) == ' ' || c == '\t') p1++;
- if (c == '#')
- p = line;
+ /* If we just got an empty line, and that is supposed
+ to repeat the previous command, return the value in the
+ global buffer. */
+ if (repeat)
+ {
+ if (p == linebuffer)
+ return line;
+ p1 = linebuffer;
+ while (*p1 == ' ' || *p1 == '\t')
+ p1++;
+ if (!*p1)
+ return line;
+ }
*p = 0;
- return line;
+ /* Add line to history if appropriate. */
+ if (instream == stdin
+ && ISATTY (stdin) && *linebuffer)
+ add_history (linebuffer);
+
+ /* Note: lines consisting soley of comments are added to the command
+ history. This is useful when you type a command, and then
+ realize you don't want to execute it quite yet. You can comment
+ out the command and then later fetch it from the value history
+ and remove the '#'. The kill ring is probably better, but some
+ people are in the habit of commenting things out. */
+ p1 = linebuffer;
+ while ((c = *p1++) != '\0')
+ {
+ if (c == '"')
+ while ((c = *p1++) != '"')
+ {
+ /* Make sure an escaped '"' doesn't make us think the string
+ is ended. */
+ if (c == '\\')
+ parse_escape (&p1);
+ if (c == '\0')
+ break;
+ }
+ else if (c == '\'')
+ while ((c = *p1++) != '\'')
+ {
+ /* Make sure an escaped '\'' doesn't make us think the string
+ is ended. */
+ if (c == '\\')
+ parse_escape (&p1);
+ if (c == '\0')
+ break;
+ }
+ else if (c == '#')
+ {
+ /* Found a comment. */
+ p1[-1] = '\0';
+ break;
+ }
+ }
+
+ /* Save into global buffer if appropriate. */
+ if (repeat)
+ {
+ if (linelength > linesize)
+ {
+ line = xrealloc (line, linelength);
+ linesize = linelength;
+ }
+ strcpy (line, linebuffer);
+ return line;
+ }
+
+ return linebuffer;
}
\f
/* Read lines from the input stream
while (1)
{
dont_repeat ();
- p = gdb_read_line (0, 1);
+ p = command_line_input ((char *) NULL, instream == stdin);
+ if (p == NULL)
+ /* Treat end of file like "end". */
+ break;
+
/* Remove leading and trailing blanks. */
while (*p == ' ' || *p == '\t') p++;
p1 = p + strlen (p);
{
next = l->next;
free (l->line);
- free (l);
+ free ((PTR)l);
l = next;
}
}
void
add_info (name, fun, doc)
char *name;
- void (*fun) ();
+ void (*fun) PARAMS ((char *, int));
char *doc;
{
add_cmd (name, no_class, fun, doc, &infolist);
/* The "info" command is defined as a prefix, with allow_unknown = 0.
Therefore, its own definition is called only for "info" with no args. */
+/* ARGSUSED */
static void
-info_command ()
+info_command (arg, from_tty)
+ char *arg;
+ int from_tty;
{
printf ("\"info\" must be followed by the name of an info command.\n");
help_list (infolist, "info ", -1, stdout);
}
+
+/* The "show" command with no arguments shows all the settings. */
+
+/* ARGSUSED */
+static void
+show_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ cmd_show_list (showlist, from_tty, "");
+}
\f
/* Add an element to the list of commands. */
void
add_com (name, class, fun, doc)
char *name;
- int class;
- void (*fun) ();
+ enum command_class class;
+ void (*fun) PARAMS ((char *, int));
char *doc;
{
add_cmd (name, class, fun, doc, &cmdlist);
add_com_alias (name, oldname, class, abbrev_flag)
char *name;
char *oldname;
- int class;
+ enum command_class class;
int abbrev_flag;
{
add_alias_cmd (name, oldname, class, abbrev_flag, &cmdlist);
error ("Argument required (%s).", why);
}
+/* ARGSUSED */
static void
help_command (command, from_tty)
char *command;
p = comname;
while (*p)
{
- if (!(*p >= 'A' && *p <= 'Z')
- && !(*p >= 'a' && *p <= 'z')
- && !(*p >= '0' && *p <= '9')
- && *p != '-')
+ if (!isalnum(*p) && *p != '-')
error ("Junk in argument list: \"%s\"", p);
p++;
}
}
+/* This is just a placeholder in the command data structures. */
+static void
+user_defined_command (ignore, from_tty)
+ char *ignore;
+ int from_tty;
+{
+}
+
static void
define_command (comname, from_tty)
char *comname;
int from_tty;
{
register struct command_line *cmds;
- register struct cmd_list_element *c;
+ register struct cmd_list_element *c, *newc, *hookc = 0;
char *tem = comname;
+#define HOOK_STRING "hook-"
+#define HOOK_LEN 5
validate_comname (comname);
- c = lookup_cmd (&tem, cmdlist, "", -1);
+ /* Look it up, and verify that we got an exact match. */
+ c = lookup_cmd (&tem, cmdlist, "", -1, 1);
+ if (c && !STREQ (comname, c->name))
+ c = 0;
+
if (c)
{
- if (c->class == (int) class_user || c->class == (int) class_alias)
+ if (c->class == class_user || c->class == class_alias)
tem = "Redefine command \"%s\"? ";
else
tem = "Really redefine built-in command \"%s\"? ";
- if (!query (tem, comname))
- error ("Command \"%s\" not redefined.", comname);
+ if (!query (tem, c->name))
+ error ("Command \"%s\" not redefined.", c->name);
+ }
+
+ /* If this new command is a hook, then mark the command which it
+ is hooking. Note that we allow hooking `help' commands, so that
+ we can hook the `stop' pseudo-command. */
+
+ if (!strncmp (comname, HOOK_STRING, HOOK_LEN))
+ {
+ /* Look up cmd it hooks, and verify that we got an exact match. */
+ tem = comname+HOOK_LEN;
+ hookc = lookup_cmd (&tem, cmdlist, "", -1, 0);
+ if (hookc && !STREQ (comname+HOOK_LEN, hookc->name))
+ hookc = 0;
+ if (!hookc)
+ {
+ warning ("Your new `%s' command does not hook any existing command.",
+ comname);
+ if (!query ("Proceed? ", (char *)0))
+ error ("Not confirmed.");
+ }
}
+ comname = savestring (comname, strlen (comname));
+
+ /* If the rest of the commands will be case insensitive, this one
+ should behave in the same manner. */
+ for (tem = comname; *tem; tem++)
+ if (isupper(*tem)) *tem = tolower(*tem);
+
if (from_tty)
{
printf ("Type commands for definition of \"%s\".\n\
End with a line saying just \"end\".\n", comname);
fflush (stdout);
}
- comname = savestring (comname, strlen (comname));
cmds = read_command_lines ();
- if (c && c->class == (int) class_user)
- free_command_lines (&c->function);
+ if (c && c->class == class_user)
+ free_command_lines (&c->user_commands);
+
+ newc = add_cmd (comname, class_user, user_defined_command,
+ (c && c->class == class_user)
+ ? c->doc : savestring ("User-defined.", 13), &cmdlist);
+ newc->user_commands = cmds;
- add_com (comname, class_user, cmds,
- (c && c->class == (int) class_user)
- ? c->doc : savestring ("User-defined.", 13));
+ /* If this new command is a hook, then mark both commands as being
+ tied. */
+ if (hookc)
+ {
+ hookc->hook = newc; /* Target gets hooked. */
+ newc->hookee = hookc; /* We are marked as hooking target cmd. */
+ }
}
static void
validate_comname (comname);
- c = lookup_cmd (&tem, cmdlist, "", 0);
+ c = lookup_cmd (&tem, cmdlist, "", 0, 1);
- if (c->class != (int) class_user)
+ if (c->class != class_user)
error ("Command \"%s\" is built-in.", comname);
if (from_tty)
}
\f
static void
-copying_info ()
+print_gnu_advertisement()
{
- immediate_quit++;
- printf (" GDB GENERAL PUBLIC LICENSE\n\
- (Clarified 11 Feb 1988)\n\
-\n\
- Copyright (C) 1988 Richard M. Stallman\n\
- Everyone is permitted to copy and distribute verbatim copies\n\
- of this license, but changing it is not allowed.\n\
- You can also use this wording to make the terms for other programs.\n\
-\n\
- The license agreements of most software companies keep you at the\n\
-mercy of those companies. By contrast, our general public license is\n\
-intended to give everyone the right to share GDB. To make sure that\n\
-you get the rights we want you to have, we need to make restrictions\n\
-that forbid anyone to deny you these rights or to ask you to surrender\n\
-the rights. Hence this license agreement.\n\
-\n\
- Specifically, we want to make sure that you have the right to give\n\
-away copies of GDB, that you receive source code or else can get it\n\
-if you want it, that you can change GDB or use pieces of it in new\n\
-free programs, and that you know you can do these things.\n\
---Type Return to print more--");
- fflush (stdout);
- gdb_read_line (0, 0);
-
- printf ("\
- To make sure that everyone has such rights, we have to forbid you to\n\
-deprive anyone else of these rights. For example, if you distribute\n\
-copies of GDB, you must give the recipients all the rights that you\n\
-have. You must make sure that they, too, receive or can get the\n\
-source code. And you must tell them their rights.\n\
-\n\
- Also, for our own protection, we must make certain that everyone\n\
-finds out that there is no warranty for GDB. If GDB is modified by\n\
-someone else and passed on, we want its recipients to know that what\n\
-they have is not what we distributed, so that any problems introduced\n\
-by others will not reflect on our reputation.\n\
-\n\
- Therefore we (Richard Stallman and the Free Software Foundation,\n\
-Inc.) make the following terms which say what you must do to be\n\
-allowed to distribute or change GDB.\n\
---Type Return to print more--");
- fflush (stdout);
- gdb_read_line (0, 0);
-
- printf ("\
- COPYING POLICIES\n\
-\n\
- 1. You may copy and distribute verbatim copies of GDB source code as\n\
-you receive it, in any medium, provided that you conspicuously and\n\
-appropriately publish on each copy a valid copyright notice \"Copyright\n\
-\(C) 1988 Free Software Foundation, Inc.\" (or with whatever year is\n\
-appropriate); keep intact the notices on all files that refer\n\
-to this License Agreement and to the absence of any warranty; and give\n\
-any other recipients of the GDB program a copy of this License\n\
-Agreement along with the program. You may charge a distribution fee\n\
-for the physical act of transferring a copy.\n\
-\n\
- 2. You may modify your copy or copies of GDB or any portion of it,\n\
-and copy and distribute such modifications under the terms of\n\
-Paragraph 1 above, provided that you also do the following:\n\
-\n\
- a) cause the modified files to carry prominent notices stating\n\
- that you changed the files and the date of any change; and\n\
---Type Return to print more--");
- fflush (stdout);
- gdb_read_line (0, 0);
-
- printf ("\
- b) cause the whole of any work that you distribute or publish,\n\
- that in whole or in part contains or is a derivative of GDB\n\
- or any part thereof, to be licensed to all third parties on terms\n\
- identical to those contained in this License Agreement (except that\n\
- you may choose to grant more extensive warranty protection to some\n\
- or all third parties, at your option).\n\
-\n");
- printf ("\
- c) if the modified program serves as a debugger, cause it\n\
- when started running in the simplest and usual way, to print\n\
- an announcement including a valid copyright notice\n\
- \"Copyright (C) 1988 Free Software Foundation, Inc.\" (or with\n\
- the year that is appropriate), saying that there is no warranty\n\
- (or else, saying that you provide a warranty) and that users may\n\
- redistribute the program under these conditions, and telling the user\n\
- how to view a copy of this License Agreement.\n\
-\n\
- d) You may charge a distribution fee for the physical act of\n\
- transferring a copy, and you may at your option offer warranty\n\
- protection in exchange for a fee.\n\
-\n\
-Mere aggregation of another unrelated program with this program (or its\n\
-derivative) on a volume of a storage or distribution medium does not bring\n\
-the other program under the scope of these terms.\n\
---Type Return to print more--");
- fflush (stdout);
- gdb_read_line (0, 0);
-
- printf ("\
- 3. You may copy and distribute GDB (or a portion or derivative of it,\n\
-under Paragraph 2) in object code or executable form under the terms of\n\
-Paragraphs 1 and 2 above provided that you also do one of the following:\n\
-\n\
- a) accompany it with the complete corresponding machine-readable\n\
- source code, which must be distributed under the terms of\n\
- Paragraphs 1 and 2 above; or,\n\
-\n\
- b) accompany it with a written offer, valid for at least three\n\
- years, to give any third party free (except for a nominal\n\
- shipping charge) a complete machine-readable copy of the\n\
- corresponding source code, to be distributed under the terms of\n\
- Paragraphs 1 and 2 above; or,\n\n");
-
- printf ("\
- c) accompany it with the information you received as to where the\n\
- corresponding source code may be obtained. (This alternative is\n\
- allowed only for noncommercial distribution and only if you\n\
- received the program in object code or executable form alone.)\n\
-\n\
-For an executable file, complete source code means all the source code for\n\
-all modules it contains; but, as a special exception, it need not include\n\
-source code for modules which are standard libraries that accompany the\n\
-operating system on which the executable file runs.\n\
---Type Return to print more--");
- fflush (stdout);
- gdb_read_line (0, 0);
-
- printf ("\
- 4. You may not copy, sublicense, distribute or transfer GDB\n\
-except as expressly provided under this License Agreement. Any attempt\n\
-otherwise to copy, sublicense, distribute or transfer GDB is void and\n\
-your rights to use the program under this License agreement shall be\n\
-automatically terminated. However, parties who have received computer\n\
-software programs from you with this License Agreement will not have\n\
-their licenses terminated so long as such parties remain in full compliance.\n\
-\n\
-");
- printf ("\
- 5. If you wish to incorporate parts of GDB into other free\n\
-programs whose distribution conditions are different, write to the Free\n\
-Software Foundation at 675 Mass Ave, Cambridge, MA 02139. We have not yet\n\
-worked out a simple rule that can be stated here, but we will often permit\n\
-this. We will be guided by the two goals of preserving the free status of\n\
-all derivatives of our free software and of promoting the sharing and reuse\n\
-of software.\n\
-\n\
-In other words, go ahead and share GDB, but don't try to stop\n\
-anyone else from sharing it farther. Help stamp out software hoarding!\n\
+ printf ("\
+GDB is free software and you are welcome to distribute copies of it\n\
+ under certain conditions; type \"show copying\" to see the conditions.\n\
+There is absolutely no warranty for GDB; type \"show warranty\" for details.\n\
");
- immediate_quit--;
}
static void
-warranty_info ()
-{
- immediate_quit++;
- printf (" NO WARRANTY\n\
-\n\
- BECAUSE GDB IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY NO\n\
-WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW. EXCEPT\n\
-WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC,\n\
-RICHARD M. STALLMAN AND/OR OTHER PARTIES PROVIDE GDB \"AS IS\" WITHOUT\n\
-WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT\n\
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR\n\
-A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND\n\
-PERFORMANCE OF GDB IS WITH YOU. SHOULD GDB PROVE DEFECTIVE, YOU\n\
-ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.\n\n");
-
- printf ("\
- IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M.\n\
-STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., AND/OR ANY OTHER PARTY\n\
-WHO MAY MODIFY AND REDISTRIBUTE GDB, BE LIABLE TO\n\
-YOU FOR DAMAGES, INCLUDING ANY LOST PROFITS, LOST MONIES, OR OTHER\n\
-SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR\n\
-INABILITY TO USE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA\n\
-BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR A\n\
-FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) GDB, EVEN\n\
-IF YOU HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR\n\
-ANY CLAIM BY ANY OTHER PARTY.\n");
- immediate_quit--;
-}
-\f
-static void
-print_gdb_version ()
+print_gdb_version (stream)
+ FILE *stream;
{
- printf ("GDB %s, Copyright (C) 1988 Free Software Foundation, Inc.\n\
-There is ABSOLUTELY NO WARRANTY for GDB; type \"info warranty\" for details.\n\
-GDB is free software and you are welcome to distribute copies of it\n\
- under certain conditions; type \"info copying\" to see the conditions.\n",
+ fprintf_filtered (stream, "\
+GDB %s, Copyright 1993 Free Software Foundation, Inc.",
version);
}
+/* ARGSUSED */
static void
-version_info ()
+show_version (args, from_tty)
+ char *args;
+ int from_tty;
{
immediate_quit++;
- print_gdb_version ();
+ print_gnu_advertisement ();
+ print_gdb_version (stdout);
+ printf_filtered ("\n");
immediate_quit--;
}
\f
printf ("%s", prompt);
fflush (stdout);
}
-
-/* Command to specify a prompt string instead of "(gdb) ". */
-
+\f
static void
-set_prompt_command (text)
- char *text;
+quit_command (args, from_tty)
+ char *args;
+ int from_tty;
{
- char *p, *q;
- register int c;
- char *new;
-
- if (text == 0)
- error_no_arg ("string to which to set prompt");
-
- new = (char *) xmalloc (strlen (text) + 2);
- p = text; q = new;
- while (c = *p++)
+ if (inferior_pid != 0 && target_has_execution)
{
- if (c == '\\')
+ if (attach_flag)
{
- /* \ at end of argument is used after spaces
- so they won't be lost. */
- if (*p == 0)
- break;
- c = parse_escape (&p);
- if (c == 0)
- break; /* C loses */
- else if (c > 0)
- *q++ = c;
+ if (query ("The program is running. Quit anyway (and detach it)? "))
+ target_detach (args, from_tty);
+ else
+ error ("Not confirmed.");
}
else
- *q++ = c;
- }
- if (*(p - 1) != '\\')
- *q++ = ' ';
- *q++ = '\0';
- new = (char *) xrealloc (new, q - new);
- free (prompt);
- prompt = new;
-}
-\f
-static void
-quit_command ()
-{
- if (have_inferior_p ())
- {
- if (query ("The program is running. Quit anyway? "))
{
- /* Prevent any warning message from reopen_exec_file, in case
- we have a core file that's inconsistent with the exec file. */
- exec_file_command (0, 0);
- kill_inferior ();
+ if (query ("The program is running. Quit anyway (and kill it)? "))
+ target_kill ();
+ else
+ error ("Not confirmed.");
}
- else
- error ("Not confirmed.");
}
+ /* Save the history information if it is appropriate to do so. */
+ if (write_history_p && history_filename)
+ write_history (history_filename);
exit (0);
}
+/* Returns whether GDB is running on a terminal and whether the user
+ desires that questions be asked of them on that terminal. */
+
int
input_from_terminal_p ()
{
- return instream == stdin;
+ return gdb_has_a_terminal && (instream == stdin) & caution;
}
\f
+/* ARGSUSED */
static void
-pwd_command (arg, from_tty)
- char *arg;
+pwd_command (args, from_tty)
+ char *args;
int from_tty;
{
- if (arg) error ("The \"pwd\" command does not take an argument: %s", arg);
- getwd (dirbuf);
+ if (args) error ("The \"pwd\" command does not take an argument: %s", args);
+ getcwd (dirbuf, sizeof (dirbuf));
- if (strcmp (dirbuf, current_directory))
+ if (!STREQ (dirbuf, current_directory))
printf ("Working directory %s\n (canonically %s).\n",
current_directory, dirbuf);
else
int len;
int change;
+ /* If the new directory is absolute, repeat is a no-op; if relative,
+ repeat might be useful but is more likely to be a mistake. */
+ dont_repeat ();
+
if (dir == 0)
error_no_arg ("new working directory");
+ dir = tilde_expand (dir);
+ make_cleanup (free, dir);
+
+ if (chdir (dir) < 0)
+ perror_with_name (dir);
+
len = strlen (dir);
dir = savestring (dir, len - (len > 1 && dir[len-1] == '/'));
if (dir[0] == '/')
current_directory = dir;
else
{
- current_directory = concat (current_directory, "/", dir);
+ current_directory = concat (current_directory, "/", dir, NULL);
free (dir);
}
}
}
- if (chdir (dir) < 0)
- perror_with_name (dir);
+ forget_cached_source_info ();
if (from_tty)
pwd_command ((char *) 0, 1);
}
\f
+/* ARGSUSED */
static void
-source_command (file)
- char *file;
+source_command (args, from_tty)
+ char *args;
+ int from_tty;
{
FILE *stream;
struct cleanup *cleanups;
+ char *file = args;
+
+ if (file == NULL)
+ {
+ error ("source command requires pathname of file to source.");
+ }
- if (file == 0)
- error_no_arg ("file to read commands from");
+ file = tilde_expand (file);
+ make_cleanup (free, file);
- stream = fopen (file, "r");
+ stream = fopen (file, FOPEN_RT);
if (stream == 0)
perror_with_name (file);
- cleanups = make_cleanup (source_cleanup, instream);
-
- instream = stream;
+ cleanups = make_cleanup (fclose, stream);
- command_loop ();
+ read_command_file (stream);
do_cleanups (cleanups);
}
+/* ARGSUSED */
static void
-echo_command (text)
+echo_command (text, from_tty)
char *text;
+ int from_tty;
{
char *p = text;
register int c;
if (text)
- while (c = *p++)
+ while ((c = *p++) != '\0')
{
if (c == '\\')
{
c = parse_escape (&p);
if (c >= 0)
- fputc (c, stdout);
+ printf_filtered ("%c", c);
}
else
- fputc (c, stdout);
+ printf_filtered ("%c", c);
}
+
+ /* Force this output to appear now. */
+ wrap_here ("");
+ fflush (stdout);
+}
+
+\f
+/* Functions to manipulate command line editing control variables. */
+
+/* Number of commands to print in each call to show_commands. */
+#define Hist_print 10
+static void
+show_commands (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ /* Index for history commands. Relative to history_base. */
+ int offset;
+
+ /* Number of the history entry which we are planning to display next.
+ Relative to history_base. */
+ static int num = 0;
+
+ /* The first command in the history which doesn't exist (i.e. one more
+ than the number of the last command). Relative to history_base. */
+ int hist_len;
+
+ extern struct _hist_entry *history_get PARAMS ((int));
+ extern int history_base;
+
+ /* Print out some of the commands from the command history. */
+ /* First determine the length of the history list. */
+ hist_len = history_size;
+ for (offset = 0; offset < history_size; offset++)
+ {
+ if (!history_get (history_base + offset))
+ {
+ hist_len = offset;
+ break;
+ }
+ }
+
+ if (args)
+ {
+ if (args[0] == '+' && args[1] == '\0')
+ /* "info editing +" should print from the stored position. */
+ ;
+ else
+ /* "info editing <exp>" should print around command number <exp>. */
+ num = (parse_and_eval_address (args) - history_base) - Hist_print / 2;
+ }
+ /* "show commands" means print the last Hist_print commands. */
+ else
+ {
+ num = hist_len - Hist_print;
+ }
+
+ if (num < 0)
+ num = 0;
+
+ /* If there are at least Hist_print commands, we want to display the last
+ Hist_print rather than, say, the last 6. */
+ if (hist_len - num < Hist_print)
+ {
+ num = hist_len - Hist_print;
+ if (num < 0)
+ num = 0;
+ }
+
+ for (offset = num; offset < num + Hist_print && offset < hist_len; offset++)
+ {
+ printf_filtered ("%5d %s\n", history_base + offset,
+ (history_get (history_base + offset))->line);
+ }
+
+ /* The next command we want to display is the next one that we haven't
+ displayed yet. */
+ num += Hist_print;
+
+ /* If the user repeats this command with return, it should do what
+ "show commands +" does. This is unnecessary if arg is null,
+ because "show commands +" is not useful after "show commands". */
+ if (from_tty && args)
+ {
+ args[0] = '+';
+ args[1] = '\0';
+ }
+}
+
+/* Called by do_setshow_command. */
+/* ARGSUSED */
+static void
+set_history_size_command (args, from_tty, c)
+ char *args;
+ int from_tty;
+ struct cmd_list_element *c;
+{
+ if (history_size == INT_MAX)
+ unstifle_history ();
+ else if (history_size >= 0)
+ stifle_history (history_size);
+ else
+ {
+ history_size = INT_MAX;
+ error ("History size must be non-negative");
+ }
}
+/* ARGSUSED */
static void
-dump_me_command ()
+set_history (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ printf ("\"set history\" must be followed by the name of a history subcommand.\n");
+ help_list (sethistlist, "set history ", -1, stdout);
+}
+
+/* ARGSUSED */
+static void
+show_history (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ cmd_show_list (showhistlist, from_tty, "");
+}
+
+int info_verbose = 0; /* Default verbose msgs off */
+
+/* Called by do_setshow_command. An elaborate joke. */
+/* ARGSUSED */
+static void
+set_verbose (args, from_tty, c)
+ char *args;
+ int from_tty;
+ struct cmd_list_element *c;
{
- if (query ("Should GDB dump core? "))
+ char *cmdname = "verbose";
+ struct cmd_list_element *showcmd;
+
+ showcmd = lookup_cmd_1 (&cmdname, showlist, NULL, 1);
+
+ if (info_verbose)
+ {
+ c->doc = "Set verbose printing of informational messages.";
+ showcmd->doc = "Show verbose printing of informational messages.";
+ }
+ else
{
- signal (SIGQUIT, SIG_DFL);
- kill (getpid (), SIGQUIT);
+ c->doc = "Set verbosity.";
+ showcmd->doc = "Show verbosity.";
}
}
+
+static void
+float_handler (signo)
+int signo;
+{
+ /* This message is based on ANSI C, section 4.7. Note that integer
+ divide by zero causes this, so "float" is a misnomer. */
+ signal (SIGFPE, float_handler);
+ error ("Erroneous arithmetic operation.");
+}
+
+/* Return whether we are running a batch file or from terminal. */
+int
+batch_mode ()
+{
+ return !(instream == stdin && ISATTY (stdin));
+}
+
\f
static void
-init_cmd_lists ()
+initialize_cmd_lists ()
+{
+ cmdlist = NULL;
+ infolist = NULL;
+ enablelist = NULL;
+ disablelist = NULL;
+ deletelist = NULL;
+ enablebreaklist = NULL;
+ setlist = NULL;
+ unsetlist = NULL;
+ showlist = NULL;
+ sethistlist = NULL;
+ showhistlist = NULL;
+ unsethistlist = NULL;
+#if MAINTENANCE_CMDS
+ maintenancelist = NULL;
+ maintenanceinfolist = NULL;
+ maintenanceprintlist = NULL;
+#endif
+ setprintlist = NULL;
+ showprintlist = NULL;
+ setchecklist = NULL;
+ showchecklist = NULL;
+}
+
+/* Init the history buffer. Note that we are called after the init file(s)
+ * have been read so that the user can change the history file via his
+ * .gdbinit file (for instance). The GDBHISTFILE environment variable
+ * overrides all of this.
+ */
+
+static void
+initialize_history()
{
- cmdlist = (struct cmd_list_element *) 0;
- infolist = (struct cmd_list_element *) 0;
- enablelist = (struct cmd_list_element *) 0;
- disablelist = (struct cmd_list_element *) 0;
- deletelist = (struct cmd_list_element *) 0;
- enablebreaklist = (struct cmd_list_element *) 0;
- setlist = (struct cmd_list_element *) 0;
+ char *tmpenv;
+
+ tmpenv = getenv ("HISTSIZE");
+ if (tmpenv)
+ history_size = atoi (tmpenv);
+ else if (!history_size)
+ history_size = 256;
+
+ stifle_history (history_size);
+
+ tmpenv = getenv ("GDBHISTFILE");
+ if (tmpenv)
+ history_filename = savestring (tmpenv, strlen(tmpenv));
+ else if (!history_filename) {
+ /* We include the current directory so that if the user changes
+ directories the file written will be the same as the one
+ that was read. */
+ history_filename = concat (current_directory, "/.gdb_history", NULL);
+ }
+ read_history (history_filename);
}
static void
-init_main ()
+initialize_main ()
{
+ struct cmd_list_element *c;
+
+#ifdef DEFAULT_PROMPT
+ prompt = savestring (DEFAULT_PROMPT, strlen(DEFAULT_PROMPT));
+#else
prompt = savestring ("(gdb) ", 6);
+#endif
+
+ /* Set the important stuff up for command editing. */
+ command_editing_p = 1;
+ history_expansion_p = 0;
+ write_history_p = 0;
+
+ /* Setup important stuff for command line editing. */
+ rl_completion_entry_function = (int (*)()) symbol_completion_function;
+ rl_completer_word_break_characters = gdb_completer_word_break_characters;
+ rl_completer_quote_characters = gdb_completer_quote_characters;
+ rl_readline_name = "gdb";
/* Define the classes of commands.
They will appear in the help list in the reverse of this order. */
- add_cmd ("obscure", class_obscure, 0, "Obscure features.", &cmdlist);
- add_cmd ("alias", class_alias, 0, "Aliases of other commands.", &cmdlist);
- add_cmd ("user", class_user, 0, "User-defined commands.\n\
+ add_cmd ("internals", class_maintenance, NO_FUNCTION,
+ "Maintenance commands.\n\
+Some gdb commands are provided just for use by gdb maintainers.\n\
+These commands are subject to frequent change, and may not be as\n\
+well documented as user commands.",
+ &cmdlist);
+ add_cmd ("obscure", class_obscure, NO_FUNCTION, "Obscure features.", &cmdlist);
+ add_cmd ("aliases", class_alias, NO_FUNCTION, "Aliases of other commands.", &cmdlist);
+ add_cmd ("user-defined", class_user, NO_FUNCTION, "User-defined commands.\n\
The commands in this class are those defined by the user.\n\
Use the \"define\" command to define a command.", &cmdlist);
- add_cmd ("support", class_support, 0, "Support facilities.", &cmdlist);
- add_cmd ("status", class_info, 0, "Status inquiries.", &cmdlist);
- add_cmd ("files", class_files, 0, "Specifying and examining files.", &cmdlist);
- add_cmd ("breakpoints", class_breakpoint, 0, "Making program stop at certain points.", &cmdlist);
- add_cmd ("data", class_vars, 0, "Examining data.", &cmdlist);
- add_cmd ("stack", class_stack, 0, "Examining the stack.\n\
+ add_cmd ("support", class_support, NO_FUNCTION, "Support facilities.", &cmdlist);
+ add_cmd ("status", class_info, NO_FUNCTION, "Status inquiries.", &cmdlist);
+ add_cmd ("files", class_files, NO_FUNCTION, "Specifying and examining files.", &cmdlist);
+ add_cmd ("breakpoints", class_breakpoint, NO_FUNCTION, "Making program stop at certain points.", &cmdlist);
+ add_cmd ("data", class_vars, NO_FUNCTION, "Examining data.", &cmdlist);
+ add_cmd ("stack", class_stack, NO_FUNCTION, "Examining the stack.\n\
The stack is made up of stack frames. Gdb assigns numbers to stack frames\n\
counting from zero for the innermost (currently executing) frame.\n\n\
At any time gdb identifies one frame as the \"selected\" frame.\n\
When the program being debugged stops, gdb selects the innermost frame.\n\
The commands below can be used to select other frames by number or address.",
&cmdlist);
- add_cmd ("running", class_run, 0, "Running the program.", &cmdlist);
+ add_cmd ("running", class_run, NO_FUNCTION, "Running the program.", &cmdlist);
add_com ("pwd", class_files, pwd_command,
"Print working directory. This is used for your program as well.");
The change does not take effect for the program being debugged\n\
until the next time it is started.");
- add_cmd ("prompt", class_support, set_prompt_command,
- "Change gdb's prompt from the default of \"(gdb)\"",
- &setlist);
+ add_show_from_set
+ (add_set_cmd ("prompt", class_support, var_string, (char *)&prompt,
+ "Set gdb's prompt",
+ &setlist),
+ &showlist);
+
add_com ("echo", class_support, echo_command,
"Print a constant string. Give string as argument.\n\
C escape sequences may be used in the argument.\n\
Use the \"document\" command to give documentation for the new command.\n\
Commands defined in this way do not take arguments.");
+#ifdef __STDC__
+ add_com ("source", class_support, source_command,
+ "Read commands from a file named FILE.\n\
+Note that the file \"" GDBINIT_FILENAME "\" is read automatically in this way\n\
+when gdb is started.");
+#else
+ /* Punt file name, we can't help it easily. */
add_com ("source", class_support, source_command,
"Read commands from a file named FILE.\n\
Note that the file \".gdbinit\" is read automatically in this way\n\
when gdb is started.");
+#endif
+
add_com ("quit", class_support, quit_command, "Exit gdb.");
add_com ("help", class_support, help_command, "Print list of commands.");
add_com_alias ("q", "quit", class_support, 1);
add_com_alias ("h", "help", class_support, 1);
- add_com ("dump-me", class_obscure, dump_me_command,
- "Get fatal error; make debugger dump its core.");
+
+ c = add_set_cmd ("verbose", class_support, var_boolean, (char *)&info_verbose,
+ "Set ",
+ &setlist),
+ add_show_from_set (c, &showlist);
+ c->function.sfunc = set_verbose;
+ set_verbose (NULL, 0, c);
+
+ add_show_from_set
+ (add_set_cmd ("editing", class_support, var_boolean, (char *)&command_editing_p,
+ "Set editing of command lines as they are typed.\n\
+Use \"on\" to enable to enable the editing, and \"off\" to disable it.\n\
+Without an argument, command line editing is enabled. To edit, use\n\
+EMACS-like or VI-like commands like control-P or ESC.", &setlist),
+ &showlist);
+
+ add_prefix_cmd ("history", class_support, set_history,
+ "Generic command for setting command history parameters.",
+ &sethistlist, "set history ", 0, &setlist);
+ add_prefix_cmd ("history", class_support, show_history,
+ "Generic command for showing command history parameters.",
+ &showhistlist, "show history ", 0, &showlist);
+
+ add_show_from_set
+ (add_set_cmd ("expansion", no_class, var_boolean, (char *)&history_expansion_p,
+ "Set history expansion on command input.\n\
+Without an argument, history expansion is enabled.", &sethistlist),
+ &showhistlist);
+
+ add_show_from_set
+ (add_set_cmd ("save", no_class, var_boolean, (char *)&write_history_p,
+ "Set saving of the history record on exit.\n\
+Use \"on\" to enable to enable the saving, and \"off\" to disable it.\n\
+Without an argument, saving is enabled.", &sethistlist),
+ &showhistlist);
+
+ c = add_set_cmd ("size", no_class, var_integer, (char *)&history_size,
+ "Set the size of the command history, \n\
+ie. the number of previous commands to keep a record of.", &sethistlist);
+ add_show_from_set (c, &showhistlist);
+ c->function.sfunc = set_history_size_command;
+
+ add_show_from_set
+ (add_set_cmd ("filename", no_class, var_filename, (char *)&history_filename,
+ "Set the filename in which to record the command history\n\
+ (the list of previous commands of which a record is kept).", &sethistlist),
+ &showhistlist);
+
+ add_show_from_set
+ (add_set_cmd ("confirm", class_support, var_boolean,
+ (char *)&caution,
+ "Set whether to confirm potentially dangerous operations.",
+ &setlist),
+ &showlist);
add_prefix_cmd ("info", class_info, info_command,
- "Generic command for printing status.",
+ "Generic command for showing things about the program being debugged.",
&infolist, "info ", 0, &cmdlist);
add_com_alias ("i", "info", class_info, 1);
- add_info ("copying", copying_info, "Conditions for redistributing copies of GDB.");
- add_info ("warranty", warranty_info, "Various kinds of warranty you do not have.");
- add_info ("version", version_info, "Report what version of GDB this is.");
+ add_prefix_cmd ("show", class_info, show_command,
+ "Generic command for showing things about the debugger.",
+ &showlist, "show ", 0, &cmdlist);
+ /* Another way to get at the same thing. */
+ add_info ("set", show_command, "Show all GDB settings.");
+
+ add_cmd ("commands", no_class, show_commands,
+ "Show the the history of commands you typed.\n\
+You can supply a command number to start with, or a `+' to start after\n\
+the previous command number shown.",
+ &showlist);
+
+ add_cmd ("version", no_class, show_version,
+ "Show what version of GDB this is.", &showlist);
}