/* Read a symbol table in ECOFF format (Third-Eye).
- Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993 Free Software
- Foundation, Inc.
+ Copyright 1986, 87, 89, 90, 91, 92, 93, 94, 95, 96, 97, 1998
+ Free Software Foundation, Inc.
Original version contributed by Alessandro Forin (af@cs.cmu.edu) at
CMU. Major work by Per Bothner, John Gilmore and Ian Lance Taylor
at Cygnus Support.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
/* This module provides the function mdebug_build_psymtabs. It reads
ECOFF debugging information into partial symbol tables. The
#include "buildsym.h"
#include "stabsread.h"
#include "complaints.h"
-
-#if !defined (SEEK_SET)
-#define SEEK_SET 0
-#define SEEK_CUR 1
-#endif
+#include "demangle.h"
/* These are needed if the tm.h file does not contain the necessary
mips specific definitions. */
#ifndef MIPS_EFI_SYMBOL_NAME
#define MIPS_EFI_SYMBOL_NAME "__GDB_EFI_INFO__"
+extern void ecoff_relocate_efi (struct symbol *, CORE_ADDR);
#include "coff/sym.h"
#include "coff/symconst.h"
-typedef struct mips_extra_func_info {
- long numargs;
- PDR pdr;
-} *mips_extra_func_info_t;
+typedef struct mips_extra_func_info
+ {
+ long numargs;
+ PDR pdr;
+ }
+ *mips_extra_func_info_t;
#ifndef RA_REGNUM
#define RA_REGNUM 0
#endif
#include <sys/types.h>
#endif
-#include <sys/param.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <string.h>
+#include "gdb_stat.h"
+#include "gdb_string.h"
#include "gdb-stabs.h"
#include "expression.h"
#include "language.h" /* Needed inside partial-stab.h */
+extern void _initialize_mdebugread (void);
+
/* Provide a default mapping from a ecoff register number to a gdb REGNUM. */
#ifndef ECOFF_REG_TO_REGNUM
#define ECOFF_REG_TO_REGNUM(num) (num)
#endif
-/* Each partial symbol table entry contains a pointer to private data
- for the read_symtab() function to use when expanding a partial
- symbol table entry to a full symbol table entry.
+/* Provide a way to test if we have both ECOFF and ELF symbol tables.
+ We use this define in order to know whether we should override a
+ symbol's ECOFF section with its ELF section. This is necessary in
+ case the symbol's ELF section could not be represented in ECOFF. */
+#define ECOFF_IN_ELF(bfd) (bfd_get_flavour (bfd) == bfd_target_elf_flavour \
+ && bfd_get_section_by_name (bfd, ".mdebug") != NULL)
+\f
+
+/* We put a pointer to this structure in the read_symtab_private field
+ of the psymtab. */
- For mdebugread this structure contains the index of the FDR that this
- psymtab represents and a pointer to the BFD that the psymtab was
- created from. */
+struct symloc
+ {
+ /* Index of the FDR that this psymtab represents. */
+ int fdr_idx;
+ /* The BFD that the psymtab was created from. */
+ bfd *cur_bfd;
+ const struct ecoff_debug_swap *debug_swap;
+ struct ecoff_debug_info *debug_info;
+ struct mdebug_pending **pending_list;
+ /* Pointer to external symbols for this file. */
+ EXTR *extern_tab;
+ /* Size of extern_tab. */
+ int extern_count;
+ enum language pst_language;
+ };
#define PST_PRIVATE(p) ((struct symloc *)(p)->read_symtab_private)
#define FDR_IDX(p) (PST_PRIVATE(p)->fdr_idx)
#define DEBUG_INFO(p) (PST_PRIVATE(p)->debug_info)
#define PENDING_LIST(p) (PST_PRIVATE(p)->pending_list)
-struct symloc
-{
- int fdr_idx;
- bfd *cur_bfd;
- const struct ecoff_debug_swap *debug_swap;
- struct ecoff_debug_info *debug_info;
- struct mdebug_pending **pending_list;
- EXTR *extern_tab; /* Pointer to external symbols for this file. */
- int extern_count; /* Size of extern_tab. */
- enum language pst_language;
-};
+#define SC_IS_TEXT(sc) ((sc) == scText \
+ || (sc) == scRConst \
+ || (sc) == scInit \
+ || (sc) == scFini)
+#define SC_IS_DATA(sc) ((sc) == scData \
+ || (sc) == scSData \
+ || (sc) == scRData \
+ || (sc) == scPData \
+ || (sc) == scXData)
+#define SC_IS_COMMON(sc) ((sc) == scCommon || (sc) == scSCommon)
+#define SC_IS_BSS(sc) ((sc) == scBss || (sc) == scSBss)
+#define SC_IS_UNDEF(sc) ((sc) == scUndefined || (sc) == scSUndefined)
+\f
/* Things we import explicitly from other modules */
static struct complaint unable_to_cross_ref_complaint =
{"unable to cross ref btTypedef for %s", 0, 0};
+static struct complaint bad_indirect_xref_complaint =
+{"unable to cross ref btIndirect for %s", 0, 0};
+
static struct complaint illegal_forward_tq0_complaint =
{"illegal tq0 in forward typedef for %s", 0, 0};
/* Note how much "debuggable" this image is. We would like
to see at least one FDR with full symbols */
-static max_gdbinfo;
-static max_glevel;
+static int max_gdbinfo;
+static int max_glevel;
/* When examining .o files, report on undefined symbols */
static char stabs_symbol[] = STABS_SYMBOL;
-/* Types corresponding to btComplex, btDComplex, etc. These are here
- rather than in gdbtypes.c or some such, because the meaning of codes
- like btComplex is specific to the mdebug debug format. FIXME: We should
- be using our own types thoughout this file, instead of sometimes using
- builtin_type_*. */
-
+/* Types corresponding to mdebug format bt* basic types. */
+
+static struct type *mdebug_type_void;
+static struct type *mdebug_type_char;
+static struct type *mdebug_type_short;
+static struct type *mdebug_type_int_32;
+#define mdebug_type_int mdebug_type_int_32
+static struct type *mdebug_type_int_64;
+static struct type *mdebug_type_long_32;
+static struct type *mdebug_type_long_64;
+static struct type *mdebug_type_long_long_64;
+static struct type *mdebug_type_unsigned_char;
+static struct type *mdebug_type_unsigned_short;
+static struct type *mdebug_type_unsigned_int_32;
+static struct type *mdebug_type_unsigned_int_64;
+static struct type *mdebug_type_unsigned_long_32;
+static struct type *mdebug_type_unsigned_long_64;
+static struct type *mdebug_type_unsigned_long_long_64;
+static struct type *mdebug_type_adr_32;
+static struct type *mdebug_type_adr_64;
+static struct type *mdebug_type_float;
+static struct type *mdebug_type_double;
static struct type *mdebug_type_complex;
static struct type *mdebug_type_double_complex;
static struct type *mdebug_type_fixed_dec;
static struct type *mdebug_type_float_dec;
static struct type *mdebug_type_string;
+/* Types for symbols from files compiled without debugging info. */
+
+static struct type *nodebug_func_symbol_type;
+static struct type *nodebug_var_symbol_type;
+
+/* Nonzero if we have seen ecoff debugging info for a file. */
+
+static int found_ecoff_debugging_info;
+
/* Forward declarations */
+static void add_pending (FDR *, char *, struct type *);
+
+static struct mdebug_pending *is_pending_symbol (FDR *, char *);
+
+static void pop_parse_stack (void);
+
+static void push_parse_stack (void);
+
+static char *fdr_name (FDR *);
+
+static void mdebug_psymtab_to_symtab (struct partial_symtab *);
+
static int
-upgrade_type PARAMS ((int, struct type **, int, union aux_ext *, int, char *));
+upgrade_type (int, struct type **, int, union aux_ext *, int, char *);
-static void
-parse_partial_symbols PARAMS ((struct objfile *,
- struct section_offsets *));
+static void parse_partial_symbols (struct objfile *);
+
+static FDR * get_rfd (int, int);
-static FDR
-*get_rfd PARAMS ((int, int));
+static int has_opaque_xref (FDR *, SYMR *);
static int
-cross_ref PARAMS ((int, union aux_ext *, struct type **, enum type_code,
- char **, int, char *));
+cross_ref (int, union aux_ext *, struct type **, enum type_code,
+ char **, int, char *);
-static struct symbol *
-new_symbol PARAMS ((char *));
+static struct symbol *new_symbol (char *);
-static struct type *
-new_type PARAMS ((char *));
+static struct type *new_type (char *);
-static struct block *
-new_block PARAMS ((int));
+static struct block *new_block (int);
-static struct symtab *
-new_symtab PARAMS ((char *, int, int, struct objfile *));
+static struct symtab *new_symtab (char *, int, int, struct objfile *);
-static struct linetable *
-new_linetable PARAMS ((int));
+static struct linetable *new_linetable (int);
-static struct blockvector *
-new_bvect PARAMS ((int));
+static struct blockvector *new_bvect (int);
static int
-parse_symbol PARAMS ((SYMR *, union aux_ext *, char *, int));
+parse_symbol (SYMR *, union aux_ext *, char *, int, struct section_offsets *,
+ struct objfile *);
-static struct type *
-parse_type PARAMS ((int, union aux_ext *, unsigned int, int *, int, char *));
+static struct type *parse_type (int, union aux_ext *, unsigned int, int *,
+ int, char *);
-static struct symbol *
-mylookup_symbol PARAMS ((char *, struct block *, enum namespace,
- enum address_class));
+static struct symbol *mylookup_symbol (char *, struct block *, namespace_enum,
+ enum address_class);
-static struct block *
-shrink_block PARAMS ((struct block *, struct symtab *));
+static struct block *shrink_block (struct block *, struct symtab *);
-static PTR
-xzalloc PARAMS ((unsigned int));
+static PTR xzalloc (unsigned int);
-static void
-sort_blocks PARAMS ((struct symtab *));
+static void sort_blocks (struct symtab *);
-static int
-compare_blocks PARAMS ((const void *, const void *));
+static int compare_blocks (const void *, const void *);
-static struct partial_symtab *
-new_psymtab PARAMS ((char *, struct objfile *));
+static struct partial_symtab *new_psymtab (char *, struct objfile *);
-static void
-psymtab_to_symtab_1 PARAMS ((struct partial_symtab *, char *));
+static void psymtab_to_symtab_1 (struct partial_symtab *, char *);
-static void
-add_block PARAMS ((struct block *, struct symtab *));
+static void add_block (struct block *, struct symtab *);
-static void
-add_symbol PARAMS ((struct symbol *, struct block *));
+static void add_symbol (struct symbol *, struct block *);
-static int
-add_line PARAMS ((struct linetable *, int, CORE_ADDR, int));
+static int add_line (struct linetable *, int, CORE_ADDR, int);
-static struct linetable *
-shrink_linetable PARAMS ((struct linetable *));
+static struct linetable *shrink_linetable (struct linetable *);
-static char *
-mdebug_next_symbol_text PARAMS ((void));
+static void
+handle_psymbol_enumerators (struct objfile *, FDR *, int, CORE_ADDR);
+
+static char *mdebug_next_symbol_text (struct objfile *);
\f
/* Address bounds for the signal trampoline in inferior, if any */
/* Allocate zeroed memory */
static PTR
-xzalloc (size)
- unsigned int size;
+xzalloc (unsigned int size)
{
PTR p = xmalloc (size);
and reorders the symtab list at the end */
static void
-mdebug_psymtab_to_symtab (pst)
- struct partial_symtab *pst;
+mdebug_psymtab_to_symtab (struct partial_symtab *pst)
{
if (!pst)
/* Find a file descriptor given its index RF relative to a file CF */
static FDR *
-get_rfd (cf, rf)
- int cf, rf;
+get_rfd (int cf, int rf)
{
FDR *fdrs;
register FDR *f;
if (f->rfdBase == 0)
return fdrs + rf;
(*debug_swap->swap_rfd_in) (cur_bfd,
- ((char *) debug_info->external_rfd
- + ((f->rfdBase + rf)
- * debug_swap->external_rfd_size)),
- &rfd);
+ ((char *) debug_info->external_rfd
+ + ((f->rfdBase + rf)
+ * debug_swap->external_rfd_size)),
+ &rfd);
return fdrs + rfd;
}
/* Return a safer print NAME for a file descriptor */
static char *
-fdr_name (f)
- FDR *f;
+fdr_name (FDR *f)
{
if (f->rss == -1)
return "<stripped file>";
different sections are relocated via the SECTION_OFFSETS. */
void
-mdebug_build_psymtabs (objfile, swap, info, section_offsets)
- struct objfile *objfile;
- const struct ecoff_debug_swap *swap;
- struct ecoff_debug_info *info;
- struct section_offsets *section_offsets;
+mdebug_build_psymtabs (struct objfile *objfile,
+ const struct ecoff_debug_swap *swap,
+ struct ecoff_debug_info *info)
{
cur_bfd = objfile->obfd;
debug_swap = swap;
(*swap->swap_fdr_in) (objfile->obfd, fdr_src, fdr_ptr);
}
- parse_partial_symbols (objfile, section_offsets);
+ parse_partial_symbols (objfile);
#if 0
/* Check to make sure file was compiled with -g. If not, warn the
{
if (max_gdbinfo == 0)
printf_unfiltered ("\n%s not compiled with -g, debugging support is limited.\n",
- objfile->name);
+ objfile->name);
printf_unfiltered ("You should compile with -g2 or -g3 for best debugging support.\n");
gdb_flush (gdb_stdout);
}
after use. */
static struct parse_stack
-{
- struct parse_stack *next, *prev;
- struct symtab *cur_st; /* Current symtab. */
- struct block *cur_block; /* Block in it. */
-
- /* What are we parsing. stFile, or stBlock are for files and
- blocks. stProc or stStaticProc means we have seen the start of a
- procedure, but not the start of the block within in. When we see
- the start of that block, we change it to stNil, without pushing a
- new block, i.e. stNil means both a procedure and a block. */
-
- int blocktype;
-
- int maxsyms; /* Max symbols in this block. */
- struct type *cur_type; /* Type we parse fields for. */
- int cur_field; /* Field number in cur_type. */
- CORE_ADDR procadr; /* Start addres of this procedure */
- int numargs; /* Its argument count */
-}
+ {
+ struct parse_stack *next, *prev;
+ struct symtab *cur_st; /* Current symtab. */
+ struct block *cur_block; /* Block in it. */
+
+ /* What are we parsing. stFile, or stBlock are for files and
+ blocks. stProc or stStaticProc means we have seen the start of a
+ procedure, but not the start of the block within in. When we see
+ the start of that block, we change it to stNil, without pushing a
+ new block, i.e. stNil means both a procedure and a block. */
+
+ int blocktype;
+
+ int maxsyms; /* Max symbols in this block. */
+ struct type *cur_type; /* Type we parse fields for. */
+ int cur_field; /* Field number in cur_type. */
+ CORE_ADDR procadr; /* Start addres of this procedure */
+ int numargs; /* Its argument count */
+ }
*top_stack; /* Top stack ptr */
/* Enter a new lexical context */
static void
-push_parse_stack ()
+push_parse_stack (void)
{
struct parse_stack *new;
/* Exit a lexical context */
static void
-pop_parse_stack ()
+pop_parse_stack (void)
{
if (!top_stack)
return;
/* Check whether we already saw symbol SH in file FH */
static struct mdebug_pending *
-is_pending_symbol (fh, sh)
- FDR *fh;
- char *sh;
+is_pending_symbol (FDR *fh, char *sh)
{
int f_idx = fh - debug_info->fdr;
register struct mdebug_pending *p;
/* Add a new symbol SH of type T */
static void
-add_pending (fh, sh, t)
- FDR *fh;
- char *sh;
- struct type *t;
+add_pending (FDR *fh, char *sh, struct type *t)
{
int f_idx = fh - debug_info->fdr;
struct mdebug_pending *p = is_pending_symbol (fh, sh);
SYMR's handled (normally one). */
static int
-parse_symbol (sh, ax, ext_sh, bigend)
- SYMR *sh;
- union aux_ext *ax;
- char *ext_sh;
- int bigend;
+parse_symbol (SYMR *sh, union aux_ext *ax, char *ext_sh, int bigend,
+ struct section_offsets *section_offsets, struct objfile *objfile)
{
const bfd_size_type external_sym_size = debug_swap->external_sym_size;
- void (* const swap_sym_in) PARAMS ((bfd *, PTR, SYMR *)) =
- debug_swap->swap_sym_in;
+ void (*const swap_sym_in) (bfd *, PTR, SYMR *) = debug_swap->swap_sym_in;
char *name;
struct symbol *s;
struct block *b;
else
name = debug_info->ss + cur_fdr->issBase + sh->iss;
+ switch (sh->sc)
+ {
+ case scText:
+ case scRConst:
+ /* Do not relocate relative values.
+ The value of a stEnd symbol is the displacement from the
+ corresponding start symbol value.
+ The value of a stBlock symbol is the displacement from the
+ procedure address. */
+ if (sh->st != stEnd && sh->st != stBlock)
+ sh->value += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
+ break;
+ case scData:
+ case scSData:
+ case scRData:
+ case scPData:
+ case scXData:
+ sh->value += ANOFFSET (section_offsets, SECT_OFF_DATA (objfile));
+ break;
+ case scBss:
+ case scSBss:
+ sh->value += ANOFFSET (section_offsets, SECT_OFF_BSS (objfile));
+ break;
+ }
+
switch (sh->st)
{
case stNil:
class = LOC_STATIC;
b = top_stack->cur_block;
s = new_symbol (name);
- if (sh->sc == scCommon)
+ if (SC_IS_COMMON (sh->sc))
{
/* It is a FORTRAN common block. At least for SGI Fortran the
address is not in the symbol; we need to fix it later in
SYMBOL_CLASS (s) = class;
add_symbol (s, b);
- /* Type could be missing in a number of cases */
- if (sh->sc == scUndefined || sh->sc == scNil ||
- sh->index == 0xfffff)
- SYMBOL_TYPE (s) = builtin_type_int; /* undefined? */
+ /* Type could be missing if file is compiled without debugging info. */
+ if (SC_IS_UNDEF (sh->sc)
+ || sh->sc == scNil || sh->index == indexNil)
+ SYMBOL_TYPE (s) = nodebug_var_symbol_type;
else
SYMBOL_TYPE (s) = parse_type (cur_fd, ax, sh->index, 0, bigend, name);
/* Value of a data symbol is its memory address */
case stParam: /* arg to procedure, goes into current block */
max_gdbinfo++;
+ found_ecoff_debugging_info = 1;
top_stack->numargs++;
/* Special GNU C++ name. */
- if (name[0] == CPLUS_MARKER && name[1] == 't' && name[2] == 0)
+ if (is_cplus_marker (name[0]) && name[1] == 't' && name[2] == 0)
name = "this"; /* FIXME, not alloc'd in obstack */
s = new_symbol (name);
{
case scRegister:
/* Pass by value in register. */
- SYMBOL_CLASS(s) = LOC_REGPARM;
+ SYMBOL_CLASS (s) = LOC_REGPARM;
svalue = ECOFF_REG_TO_REGNUM (svalue);
break;
case scVar:
/* Pass by reference on stack. */
- SYMBOL_CLASS(s) = LOC_REF_ARG;
+ SYMBOL_CLASS (s) = LOC_REF_ARG;
break;
case scVarRegister:
/* Pass by reference in register. */
- SYMBOL_CLASS(s) = LOC_REGPARM_ADDR;
+ SYMBOL_CLASS (s) = LOC_REGPARM_ADDR;
svalue = ECOFF_REG_TO_REGNUM (svalue);
break;
default:
/* Pass by value on stack. */
- SYMBOL_CLASS(s) = LOC_ARG;
+ SYMBOL_CLASS (s) = LOC_ARG;
break;
}
SYMBOL_VALUE (s) = svalue;
SYMBOL_TYPE (s) = parse_type (cur_fd, ax, sh->index, 0, bigend, name);
add_symbol (s, top_stack->cur_block);
-#if 0
- /* FIXME: This has not been tested. See dbxread.c */
- /* Add the type of this parameter to the function/procedure
- type of this block. */
- add_param_to_type (&top_stack->cur_block->function->type, s);
-#endif
break;
case stLabel: /* label, goes into current block */
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE; /* so that it can be used */
SYMBOL_CLASS (s) = LOC_LABEL; /* but not misused */
SYMBOL_VALUE_ADDRESS (s) = (CORE_ADDR) sh->value;
- SYMBOL_TYPE (s) = builtin_type_int;
+ SYMBOL_TYPE (s) = mdebug_type_int;
add_symbol (s, top_stack->cur_block);
break;
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
SYMBOL_CLASS (s) = LOC_BLOCK;
/* Type of the return value */
- if (sh->sc == scUndefined || sh->sc == scNil)
- t = builtin_type_int;
+ if (SC_IS_UNDEF (sh->sc) || sh->sc == scNil)
+ t = mdebug_type_int;
else
- t = parse_type (cur_fd, ax, sh->index + 1, 0, bigend, name);
+ {
+ t = parse_type (cur_fd, ax, sh->index + 1, 0, bigend, name);
+ if (STREQ (name, "malloc") && t->code == TYPE_CODE_VOID)
+ {
+ /* I don't know why, but, at least under Alpha GNU/Linux,
+ when linking against a malloc without debugging
+ symbols, its read as a function returning void---this
+ is bad because it means we cannot call functions with
+ string arguments interactively; i.e., "call
+ printf("howdy\n")" would fail with the error message
+ "program has no memory available". To avoid this, we
+ patch up the type and make it void*
+ instead. (davidm@azstarnet.com)
+ */
+ t = make_pointer_type (t, NULL);
+ }
+ }
b = top_stack->cur_block;
if (sh->st == stProc)
{
add_symbol (s, b);
/* Make a type for the procedure itself */
-#if 0
- /* FIXME: This has not been tested yet! See dbxread.c */
- /* Generate a template for the type of this function. The
- types of the arguments will be added as we read the symbol
- table. */
- memcpy (lookup_function_type (t), SYMBOL_TYPE (s), sizeof (struct type));
-#else
SYMBOL_TYPE (s) = lookup_function_type (t);
-#endif
/* Create and enter a new lexical context */
b = new_block (top_stack->maxsyms);
add_block (b, top_stack->cur_st);
/* Not if we only have partial info */
- if (sh->sc == scUndefined || sh->sc == scNil)
+ if (SC_IS_UNDEF (sh->sc) || sh->sc == scNil)
break;
push_parse_stack ();
break;
/* Beginning of code for structure, union, and enum definitions.
- They all share a common set of local variables, defined here. */
+ They all share a common set of local variables, defined here. */
{
enum type_code type_code;
char *ext_tsym;
goto structured_common;
case stBlock: /* Either a lexical block, or some type */
- if (sh->sc != scInfo && sh->sc != scCommon)
+ if (sh->sc != scInfo && !SC_IS_COMMON (sh->sc))
goto case_stBlock_code; /* Lexical block */
type_code = TYPE_CODE_UNDEF; /* We have a type. */
unknown-type blocks of info about structured data. `type_code'
has been set to the proper TYPE_CODE, if we know it. */
structured_common:
+ found_ecoff_debugging_info = 1;
push_parse_stack ();
top_stack->blocktype = stBlock;
case stMember:
if (nfields == 0 && type_code == TYPE_CODE_UNDEF)
- /* If the type of the member is Nil (or Void),
- without qualifiers, assume the tag is an
- enumeration. */
- if (tsym.index == indexNil)
- type_code = TYPE_CODE_ENUM;
- else
- {
- ecoff_swap_tir_in (bigend,
- &ax[tsym.index].a_ti,
- &tir);
- if ((tir.bt == btNil || tir.bt == btVoid)
- && tir.tq0 == tqNil)
- type_code = TYPE_CODE_ENUM;
- }
+ {
+ /* If the type of the member is Nil (or Void),
+ without qualifiers, assume the tag is an
+ enumeration.
+ Alpha cc -migrate enums are recognized by a zero
+ index and a zero symbol value.
+ DU 4.0 cc enums are recognized by a member type of
+ btEnum without qualifiers and a zero symbol value. */
+ if (tsym.index == indexNil
+ || (tsym.index == 0 && sh->value == 0))
+ type_code = TYPE_CODE_ENUM;
+ else
+ {
+ (*debug_swap->swap_tir_in) (bigend,
+ &ax[tsym.index].a_ti,
+ &tir);
+ if ((tir.bt == btNil || tir.bt == btVoid
+ || (tir.bt == btEnum && sh->value == 0))
+ && tir.tq0 == tqNil)
+ type_code = TYPE_CODE_ENUM;
+ }
+ }
nfields++;
if (tsym.value > max_value)
max_value = tsym.value;
#if 0
/* This is a no-op; is it trying to tell us something
we should be checking? */
- if (tsym.sc == scVariant); /*UNIMPLEMENTED*/
+ if (tsym.sc == scVariant); /*UNIMPLEMENTED */
#endif
if (tsym.index != 0)
{
/* This is something like a struct within a
- struct. Skip over the fields of the inner
- struct. The -1 is because the for loop will
- increment ext_tsym. */
+ struct. Skip over the fields of the inner
+ struct. The -1 is because the for loop will
+ increment ext_tsym. */
ext_tsym = ((char *) debug_info->external_sym
+ ((cur_fdr->isymBase + tsym.index - 1)
* external_sym_size));
Just ignore it. */
break;
+ case stIndirect:
+ /* Irix5 cc puts out a stIndirect for struct x if it is not
+ yet defined when it encounters
+ struct y { struct x *xp; };
+ Just ignore it. */
+ break;
+
default:
complain (&block_member_complaint, tsym.st);
}
here.) */
if (type_code == TYPE_CODE_UNDEF)
- if (nfields > 1 && max_value == 0)
- type_code = TYPE_CODE_UNION;
- else
- type_code = TYPE_CODE_STRUCT;
+ {
+ if (nfields > 1 && max_value == 0)
+ type_code = TYPE_CODE_UNION;
+ else
+ type_code = TYPE_CODE_STRUCT;
+ }
/* Create a new type or use the pending type. */
pend = is_pending_symbol (cur_fdr, ext_sh);
else
t = pend->t;
- /* Alpha cc unnamed structs do not get a tag name. */
- if (sh->iss == 0)
+ /* Do not set the tag name if it is a compiler generated tag name
+ (.Fxx or .xxfake or empty) for unnamed struct/union/enums.
+ Alpha cc puts out an sh->iss of zero for those. */
+ if (sh->iss == 0 || name[0] == '.' || name[0] == '\0')
TYPE_TAG_NAME (t) = NULL;
else
TYPE_TAG_NAME (t) = obconcat (¤t_objfile->symbol_obstack,
if (type_code == TYPE_CODE_ENUM)
{
+ int unsigned_enum = 1;
+
/* This is a non-empty enum. */
- /* c89 has the number of enumerators in the sh.value field,
+ /* DEC c89 has the number of enumerators in the sh.value field,
not the type length, so we have to compensate for that
incompatibility quirk.
This might do the wrong thing for an enum with one or two
enumerators and gcc -gcoff -fshort-enums, but these cases
- are hopefully rare enough. */
- if (TYPE_LENGTH (t) == TYPE_NFIELDS (t))
+ are hopefully rare enough.
+ Alpha cc -migrate has a sh.value field of zero, we adjust
+ that too. */
+ if (TYPE_LENGTH (t) == TYPE_NFIELDS (t)
+ || TYPE_LENGTH (t) == 0)
TYPE_LENGTH (t) = TARGET_INT_BIT / HOST_CHAR_BIT;
for (ext_tsym = ext_sh + external_sym_size;
;
if (tsym.st != stMember)
break;
- f->bitpos = tsym.value;
- f->type = t;
- f->name = debug_info->ss + cur_fdr->issBase + tsym.iss;
- f->bitsize = 0;
+ FIELD_BITPOS (*f) = tsym.value;
+ FIELD_TYPE (*f) = t;
+ FIELD_NAME (*f) = debug_info->ss + cur_fdr->issBase + tsym.iss;
+ FIELD_BITSIZE (*f) = 0;
enum_sym = ((struct symbol *)
obstack_alloc (¤t_objfile->symbol_obstack,
sizeof (struct symbol)));
memset ((PTR) enum_sym, 0, sizeof (struct symbol));
- SYMBOL_NAME (enum_sym) = f->name;
+ SYMBOL_NAME (enum_sym) =
+ obsavestring (f->name, strlen (f->name),
+ ¤t_objfile->symbol_obstack);
SYMBOL_CLASS (enum_sym) = LOC_CONST;
SYMBOL_TYPE (enum_sym) = t;
SYMBOL_NAMESPACE (enum_sym) = VAR_NAMESPACE;
SYMBOL_VALUE (enum_sym) = tsym.value;
+ if (SYMBOL_VALUE (enum_sym) < 0)
+ unsigned_enum = 0;
add_symbol (enum_sym, top_stack->cur_block);
/* Skip the stMembers that we've handled. */
count++;
f++;
}
+ if (unsigned_enum)
+ TYPE_FLAGS (t) |= TYPE_FLAG_UNSIGNED;
}
/* make this the current type */
top_stack->cur_type = t;
}
case_stBlock_code:
+ found_ecoff_debugging_info = 1;
/* beginnning of (code) block. Value of symbol
- is the displacement from procedure start */
+ is the displacement from procedure start */
push_parse_stack ();
/* Do not start a new block if this is the outermost block of a
- procedure. This allows the LOC_BLOCK symbol to point to the
- block with the local variables, so funcname::var works. */
+ procedure. This allows the LOC_BLOCK symbol to point to the
+ block with the local variables, so funcname::var works. */
if (top_stack->blocktype == stProc
|| top_stack->blocktype == stStaticProc)
{
break;
case stEnd: /* end (of anything) */
- if (sh->sc == scInfo || sh->sc == scCommon)
+ if (sh->sc == scInfo || SC_IS_COMMON (sh->sc))
{
/* Finished with type */
top_stack->cur_type = 0;
struct blockvector *bv = BLOCKVECTOR (top_stack->cur_st);
struct mips_extra_func_info *e;
struct block *b;
+ struct type *ftype = top_stack->cur_type;
int i;
BLOCK_END (top_stack->cur_block) += sh->value; /* size */
s = new_symbol (MIPS_EFI_SYMBOL_NAME);
SYMBOL_NAMESPACE (s) = LABEL_NAMESPACE;
SYMBOL_CLASS (s) = LOC_CONST;
- SYMBOL_TYPE (s) = builtin_type_void;
+ SYMBOL_TYPE (s) = mdebug_type_void;
e = ((struct mips_extra_func_info *)
obstack_alloc (¤t_objfile->symbol_obstack,
sizeof (struct mips_extra_func_info)));
+ memset ((PTR) e, 0, sizeof (struct mips_extra_func_info));
SYMBOL_VALUE (s) = (long) e;
e->numargs = top_stack->numargs;
+ e->pdr.framereg = -1;
add_symbol (s, top_stack->cur_block);
/* Reallocate symbols, saving memory */
BLOCK_END (b_bad) = BLOCK_END (b);
}
}
+
+ if (TYPE_NFIELDS (ftype) <= 0)
+ {
+ /* No parameter type information is recorded with the function's
+ type. Set that from the type of the parameter symbols. */
+ int nparams = top_stack->numargs;
+ int iparams;
+ struct symbol *sym;
+
+ if (nparams > 0)
+ {
+ TYPE_NFIELDS (ftype) = nparams;
+ TYPE_FIELDS (ftype) = (struct field *)
+ TYPE_ALLOC (ftype, nparams * sizeof (struct field));
+
+ for (i = iparams = 0; iparams < nparams; i++)
+ {
+ sym = BLOCK_SYM (b, i);
+ switch (SYMBOL_CLASS (sym))
+ {
+ case LOC_ARG:
+ case LOC_REF_ARG:
+ case LOC_REGPARM:
+ case LOC_REGPARM_ADDR:
+ TYPE_FIELD_TYPE (ftype, iparams) = SYMBOL_TYPE (sym);
+ iparams++;
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ }
}
else if (sh->sc == scText && top_stack->blocktype == stBlock)
{
case stMember: /* member of struct or union */
f = &TYPE_FIELDS (top_stack->cur_type)[top_stack->cur_field++];
- f->name = name;
- f->bitpos = sh->value;
+ FIELD_NAME (*f) = name;
+ FIELD_BITPOS (*f) = sh->value;
bitsize = 0;
- f->type = parse_type (cur_fd, ax, sh->index, &bitsize, bigend, name);
- f->bitsize = bitsize;
+ FIELD_TYPE (*f) = parse_type (cur_fd, ax, sh->index, &bitsize, bigend, name);
+ FIELD_BITSIZE (*f) = bitsize;
+ break;
+
+ case stIndirect: /* forward declaration on Irix5 */
+ /* Forward declarations from Irix5 cc are handled by cross_ref,
+ skip them. */
break;
case stTypedef: /* type definition */
+ found_ecoff_debugging_info = 1;
+
/* Typedefs for forward declarations and opaque structs from alpha cc
- are handled by cross_ref, skip them. */
+ are handled by cross_ref, skip them. */
if (sh->iss == 0)
break;
pend = is_pending_symbol (cur_fdr, ext_sh);
if (pend == (struct mdebug_pending *) NULL)
{
- t = parse_type (cur_fd, ax, sh->index, (int *)NULL, bigend, name);
+ t = parse_type (cur_fd, ax, sh->index, (int *) NULL, bigend, name);
add_pending (cur_fdr, ext_sh, t);
}
else
t = pend->t;
/* mips cc puts out a typedef with the name of the struct for forward
- declarations. These should not go into the symbol table and
- TYPE_NAME should not be set for them.
- They can't be distinguished from an intentional typedef to
- the same name however:
- x.h:
- struct x { int ix; int jx; };
- struct xx;
- x.c:
- typedef struct x x;
- struct xx {int ixx; int jxx; };
- generates a cross referencing stTypedef for x and xx.
- The user visible effect of this is that the type of a pointer
- to struct foo sometimes is given as `foo *' instead of `struct foo *'.
- The problem is fixed with alpha cc. */
-
+ declarations. These should not go into the symbol table and
+ TYPE_NAME should not be set for them.
+ They can't be distinguished from an intentional typedef to
+ the same name however:
+ x.h:
+ struct x { int ix; int jx; };
+ struct xx;
+ x.c:
+ typedef struct x x;
+ struct xx {int ixx; int jxx; };
+ generates a cross referencing stTypedef for x and xx.
+ The user visible effect of this is that the type of a pointer
+ to struct foo sometimes is given as `foo *' instead of `struct foo *'.
+ The problem is fixed with alpha cc and Irix5 cc. */
+
+ /* However if the typedef cross references to an opaque aggregate, it
+ is safe to omit it from the symbol table. */
+
+ if (has_opaque_xref (cur_fdr, sh))
+ break;
s = new_symbol (name);
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
SYMBOL_CLASS (s) = LOC_TYPEDEF;
/* Incomplete definitions of structs should not get a name. */
if (TYPE_NAME (SYMBOL_TYPE (s)) == NULL
&& (TYPE_NFIELDS (SYMBOL_TYPE (s)) != 0
- || (TYPE_CODE (SYMBOL_TYPE (s)) != TYPE_CODE_STRUCT
+ || (TYPE_CODE (SYMBOL_TYPE (s)) != TYPE_CODE_STRUCT
&& TYPE_CODE (SYMBOL_TYPE (s)) != TYPE_CODE_UNION)))
{
if (TYPE_CODE (SYMBOL_TYPE (s)) == TYPE_CODE_PTR
|| TYPE_CODE (SYMBOL_TYPE (s)) == TYPE_CODE_FUNC)
{
/* If we are giving a name to a type such as "pointer to
- foo" or "function returning foo", we better not set
- the TYPE_NAME. If the program contains "typedef char
- *caddr_t;", we don't want all variables of type char
- * to print as caddr_t. This is not just a
- consequence of GDB's type management; CC and GCC (at
- least through version 2.4) both output variables of
- either type char * or caddr_t with the type
- refering to the stTypedef symbol for caddr_t. If a future
- compiler cleans this up it GDB is not ready for it
- yet, but if it becomes ready we somehow need to
- disable this check (without breaking the PCC/GCC2.4
- case).
-
- Sigh.
-
- Fortunately, this check seems not to be necessary
- for anything except pointers or functions. */
+ foo" or "function returning foo", we better not set
+ the TYPE_NAME. If the program contains "typedef char
+ *caddr_t;", we don't want all variables of type char
+ * to print as caddr_t. This is not just a
+ consequence of GDB's type management; CC and GCC (at
+ least through version 2.4) both output variables of
+ either type char * or caddr_t with the type
+ refering to the stTypedef symbol for caddr_t. If a future
+ compiler cleans this up it GDB is not ready for it
+ yet, but if it becomes ready we somehow need to
+ disable this check (without breaking the PCC/GCC2.4
+ case).
+
+ Sigh.
+
+ Fortunately, this check seems not to be necessary
+ for anything except pointers or functions. */
}
else
TYPE_NAME (SYMBOL_TYPE (s)) = SYMBOL_NAME (s);
they are big-endian or little-endian (from fh->fBigendian). */
static struct type *
-parse_type (fd, ax, aux_index, bs, bigend, sym_name)
- int fd;
- union aux_ext *ax;
- unsigned int aux_index;
- int *bs;
- int bigend;
- char *sym_name;
+parse_type (int fd, union aux_ext *ax, unsigned int aux_index, int *bs,
+ int bigend, char *sym_name)
{
/* Null entries in this map are treated specially */
static struct type **map_bt[] =
{
- &builtin_type_void, /* btNil */
- 0, /* btAdr */
- &builtin_type_char, /* btChar */
- &builtin_type_unsigned_char,/* btUChar */
- &builtin_type_short, /* btShort */
- &builtin_type_unsigned_short, /* btUShort */
- &builtin_type_int, /* btInt */
- &builtin_type_unsigned_int, /* btUInt */
- &builtin_type_long, /* btLong */
- &builtin_type_unsigned_long,/* btULong */
- &builtin_type_float, /* btFloat */
- &builtin_type_double, /* btDouble */
+ &mdebug_type_void, /* btNil */
+ &mdebug_type_adr_32, /* btAdr */
+ &mdebug_type_char, /* btChar */
+ &mdebug_type_unsigned_char, /* btUChar */
+ &mdebug_type_short, /* btShort */
+ &mdebug_type_unsigned_short, /* btUShort */
+ &mdebug_type_int_32, /* btInt */
+ &mdebug_type_unsigned_int_32, /* btUInt */
+ &mdebug_type_long_32, /* btLong */
+ &mdebug_type_unsigned_long_32, /* btULong */
+ &mdebug_type_float, /* btFloat */
+ &mdebug_type_double, /* btDouble */
0, /* btStruct */
0, /* btUnion */
0, /* btEnum */
&mdebug_type_string, /* btString */
0, /* btBit */
0, /* btPicture */
- &builtin_type_void, /* btVoid */
+ &mdebug_type_void, /* btVoid */
0, /* DEC C++: Pointer to member */
0, /* DEC C++: Virtual function table */
0, /* DEC C++: Class (Record) */
- &builtin_type_long, /* btLong64 */
- &builtin_type_unsigned_long, /* btULong64 */
- &builtin_type_long_long, /* btLongLong64 */
- &builtin_type_unsigned_long_long, /* btULongLong64 */
- &builtin_type_unsigned_long, /* btAdr64 */
- &builtin_type_long, /* btInt64 */
- &builtin_type_unsigned_long, /* btUInt64 */
+ &mdebug_type_long_64, /* btLong64 */
+ &mdebug_type_unsigned_long_64, /* btULong64 */
+ &mdebug_type_long_long_64, /* btLongLong64 */
+ &mdebug_type_unsigned_long_long_64, /* btULongLong64 */
+ &mdebug_type_adr_64, /* btAdr64 */
+ &mdebug_type_int_64, /* btInt64 */
+ &mdebug_type_unsigned_int_64, /* btUInt64 */
};
TIR t[1];
struct type *tp = 0;
enum type_code type_code = TYPE_CODE_UNDEF;
+ /* Handle undefined types, they have indexNil. */
+ if (aux_index == indexNil)
+ return mdebug_type_int;
+
/* Handle corrupt aux indices. */
if (aux_index >= (debug_info->fdr + fd)->caux)
{
complain (&index_complaint, sym_name);
- return builtin_type_int;
+ return mdebug_type_int;
}
ax += aux_index;
/* Use aux as a type information record, map its basic type. */
- ecoff_swap_tir_in (bigend, &ax->a_ti, t);
+ (*debug_swap->swap_tir_in) (bigend, &ax->a_ti, t);
if (t->bt >= (sizeof (map_bt) / sizeof (*map_bt)))
{
complain (&basic_type_complaint, t->bt, sym_name);
- return builtin_type_int;
+ return mdebug_type_int;
}
if (map_bt[t->bt])
{
/* Cannot use builtin types -- build our own */
switch (t->bt)
{
- case btAdr:
- tp = lookup_pointer_type (builtin_type_void);
- break;
case btStruct:
type_code = TYPE_CODE_STRUCT;
break;
case btSet:
type_code = TYPE_CODE_SET;
break;
+ case btIndirect:
+ /* alpha cc -migrate uses this for typedefs. The true type will
+ be obtained by crossreferencing below. */
+ type_code = TYPE_CODE_ERROR;
+ break;
case btTypedef:
/* alpha cc uses this for typedefs. The true type will be
obtained by crossreferencing below. */
break;
default:
complain (&basic_type_complaint, t->bt, sym_name);
- return builtin_type_int;
+ return mdebug_type_int;
}
}
if (t->fBitfield)
{
+ int width = AUX_GET_WIDTH (bigend, ax);
+
/* Inhibit core dumps with some cfront generated objects that
- corrupt the TIR. */
- if (bs == (int *)NULL)
+ corrupt the TIR. */
+ if (bs == (int *) NULL)
{
- complain (&bad_fbitfield_complaint, sym_name);
- return builtin_type_int;
+ /* Alpha cc -migrate encodes char and unsigned char types
+ as short and unsigned short types with a field width of 8.
+ Enum types also have a field width which we ignore for now. */
+ if (t->bt == btShort && width == 8)
+ tp = mdebug_type_char;
+ else if (t->bt == btUShort && width == 8)
+ tp = mdebug_type_unsigned_char;
+ else if (t->bt == btEnum)
+ ;
+ else
+ complain (&bad_fbitfield_complaint, sym_name);
}
- *bs = AUX_GET_WIDTH (bigend, ax);
+ else
+ *bs = width;
ax++;
}
+ /* A btIndirect entry cross references to an aux entry containing
+ the type. */
+ if (t->bt == btIndirect)
+ {
+ RNDXR rn[1];
+ int rf;
+ FDR *xref_fh;
+ int xref_fd;
+
+ (*debug_swap->swap_rndx_in) (bigend, &ax->a_rndx, rn);
+ ax++;
+ if (rn->rfd == 0xfff)
+ {
+ rf = AUX_GET_ISYM (bigend, ax);
+ ax++;
+ }
+ else
+ rf = rn->rfd;
+
+ if (rf == -1)
+ {
+ complain (&bad_indirect_xref_complaint, sym_name);
+ return mdebug_type_int;
+ }
+ xref_fh = get_rfd (fd, rf);
+ xref_fd = xref_fh - debug_info->fdr;
+ tp = parse_type (xref_fd, debug_info->external_aux + xref_fh->iauxBase,
+ rn->index, (int *) NULL, xref_fh->fBigendian, sym_name);
+ }
+
/* All these types really point to some (common) MIPS type
definition, and only the type-qualifiers fully identify
them. We'll make the same effort at sharing. */
t->bt == btUnion ||
t->bt == btEnum ||
- /* btSet (I think) implies that the name is a tag name, not a typedef
- name. This apparently is a MIPS extension for C sets. */
+ /* btSet (I think) implies that the name is a tag name, not a typedef
+ name. This apparently is a MIPS extension for C sets. */
t->bt == btSet)
{
char *name;
if (tp == (struct type *) NULL)
tp = init_type (type_code, 0, 0, (char *) NULL, current_objfile);
+ /* DEC c89 produces cross references to qualified aggregate types,
+ dereference them. */
+ while (TYPE_CODE (tp) == TYPE_CODE_PTR
+ || TYPE_CODE (tp) == TYPE_CODE_ARRAY)
+ tp = tp->target_type;
+
/* Make sure that TYPE_CODE(tp) has an expected type code.
- Any type may be returned from cross_ref if file indirect entries
- are corrupted. */
+ Any type may be returned from cross_ref if file indirect entries
+ are corrupted. */
if (TYPE_CODE (tp) != TYPE_CODE_STRUCT
&& TYPE_CODE (tp) != TYPE_CODE_UNION
&& TYPE_CODE (tp) != TYPE_CODE_ENUM)
}
/* Do not set the tag name if it is a compiler generated tag name
- (.Fxx or .xxfake or empty) for unnamed struct/union/enums. */
+ (.Fxx or .xxfake or empty) for unnamed struct/union/enums. */
if (name[0] == '.' || name[0] == '\0')
TYPE_TAG_NAME (tp) = NULL;
else if (TYPE_TAG_NAME (tp) == NULL
|| !STREQ (TYPE_TAG_NAME (tp), name))
TYPE_TAG_NAME (tp) = obsavestring (name, strlen (name),
- ¤t_objfile->type_obstack);
+ ¤t_objfile->type_obstack);
}
}
/* All these types really point to some (common) MIPS type
definition, and only the type-qualifiers fully identify
them. We'll make the same effort at sharing.
- FIXME: btIndirect cannot happen here as it is handled by the
- switch t->bt above. And we are not doing any guessing on range types. */
- if (t->bt == btIndirect ||
- t->bt == btRange)
+ FIXME: We are not doing any guessing on range types. */
+ if (t->bt == btRange)
{
char *name;
tp = init_type (type_code, 0, 0, (char *) NULL, current_objfile);
/* Make sure that TYPE_CODE(tp) has an expected type code.
- Any type may be returned from cross_ref if file indirect entries
- are corrupted. */
+ Any type may be returned from cross_ref if file indirect entries
+ are corrupted. */
if (TYPE_CODE (tp) != TYPE_CODE_RANGE)
{
complain (&unexpected_type_code_complaint, sym_name);
if (tp == (struct type *) NULL)
{
complain (&unable_to_cross_ref_complaint, sym_name);
- tp = builtin_type_int;
+ tp = mdebug_type_int;
}
}
TYPE_FIELDS (tp) = ((struct field *)
TYPE_ALLOC (tp, 2 * sizeof (struct field)));
TYPE_FIELD_NAME (tp, 0) = obsavestring ("Low", strlen ("Low"),
- ¤t_objfile->type_obstack);
+ ¤t_objfile->type_obstack);
TYPE_FIELD_BITPOS (tp, 0) = AUX_GET_DNLOW (bigend, ax);
ax++;
TYPE_FIELD_NAME (tp, 1) = obsavestring ("High", strlen ("High"),
- ¤t_objfile->type_obstack);
+ ¤t_objfile->type_obstack);
TYPE_FIELD_BITPOS (tp, 1) = AUX_GET_DNHIGH (bigend, ax);
ax++;
}
if (!t->continued)
break;
- ecoff_swap_tir_in (bigend, &ax->a_ti, t);
+ (*debug_swap->swap_tir_in) (bigend, &ax->a_ti, t);
ax++;
}
/* Complain for illegal continuations due to corrupt aux entries. */
if (t->continued)
complain (&bad_continued_complaint, sym_name);
-
+
return tp;
}
Returns the number of aux symbols we parsed. */
static int
-upgrade_type (fd, tpp, tq, ax, bigend, sym_name)
- int fd;
- struct type **tpp;
- int tq;
- union aux_ext *ax;
- int bigend;
- char *sym_name;
+upgrade_type (int fd, struct type **tpp, int tq, union aux_ext *ax, int bigend,
+ char *sym_name)
{
int off;
struct type *t;
off = 0;
/* Determine and record the domain type (type of index) */
- ecoff_swap_rndx_in (bigend, &ax->a_rndx, &rndx);
+ (*debug_swap->swap_rndx_in) (bigend, &ax->a_rndx, &rndx);
id = rndx.index;
rf = rndx.rfd;
if (rf == 0xfff)
}
fh = get_rfd (fd, rf);
- indx = parse_type (fd, debug_info->external_aux + fh->iauxBase,
+ indx = parse_type (fh - debug_info->fdr,
+ debug_info->external_aux + fh->iauxBase,
id, (int *) NULL, bigend, sym_name);
/* The bounds type should be an integer type, but might be anything
- else due to corrupt aux entries. */
+ else due to corrupt aux entries. */
if (TYPE_CODE (indx) != TYPE_CODE_INT)
{
complain (&array_index_type_complaint, sym_name);
- indx = builtin_type_int;
+ indx = mdebug_type_int;
}
/* Get the bounds, and create the array type. */
t = create_array_type ((struct type *) NULL, *tpp, range);
/* We used to fill in the supplied array element bitsize
- here if the TYPE_LENGTH of the target type was zero.
- This happens for a `pointer to an array of anonymous structs',
- but in this case the array element bitsize is also zero,
- so nothing is gained.
- And we used to check the TYPE_LENGTH of the target type against
- the supplied array element bitsize.
- gcc causes a mismatch for `pointer to array of object',
- since the sdb directives it uses do not have a way of
- specifying the bitsize, but it does no harm (the
- TYPE_LENGTH should be correct) and we should be able to
- ignore the erroneous bitsize from the auxiliary entry safely.
- dbx seems to ignore it too. */
+ here if the TYPE_LENGTH of the target type was zero.
+ This happens for a `pointer to an array of anonymous structs',
+ but in this case the array element bitsize is also zero,
+ so nothing is gained.
+ And we used to check the TYPE_LENGTH of the target type against
+ the supplied array element bitsize.
+ gcc causes a mismatch for `pointer to array of object',
+ since the sdb directives it uses do not have a way of
+ specifying the bitsize, but it does no harm (the
+ TYPE_LENGTH should be correct) and we should be able to
+ ignore the erroneous bitsize from the auxiliary entry safely.
+ dbx seems to ignore it too. */
+
+ /* TYPE_FLAG_TARGET_STUB now takes care of the zero TYPE_LENGTH
+ problem. */
+ if (TYPE_LENGTH (*tpp) == 0)
+ {
+ TYPE_FLAGS (t) |= TYPE_FLAG_TARGET_STUB;
+ }
*tpp = t;
return 4 + off;
to look for the function which contains the MIPS_EFI_SYMBOL_NAME symbol
in question, or NULL to use top_stack->cur_block. */
-static void parse_procedure PARAMS ((PDR *, struct symtab *, unsigned long));
+static void parse_procedure (PDR *, struct symtab *, struct partial_symtab *);
static void
-parse_procedure (pr, search_symtab, first_off)
- PDR *pr;
- struct symtab *search_symtab;
- unsigned long first_off;
+parse_procedure (PDR *pr, struct symtab *search_symtab,
+ struct partial_symtab *pst)
{
struct symbol *s, *i;
struct block *b;
if (pr->isym == -1)
{
/* Static procedure at address pr->adr. Sigh. */
+ /* FIXME-32x64. assuming pr->adr fits in long. */
complain (&pdr_static_symbol_complaint, (unsigned long) pr->adr);
return;
}
{
/* external */
EXTR she;
-
+
(*debug_swap->swap_ext_in) (cur_bfd,
((char *) debug_info->external_ext
+ (pr->isym
{
#if 0
/* This loses both in the case mentioned (want a static, find a global),
- but also if we are looking up a non-mangled name which happens to
- match the name of a mangled function. */
+ but also if we are looking up a non-mangled name which happens to
+ match the name of a mangled function. */
/* We have to save the cur_fdr across the call to lookup_symbol.
- If the pdr is for a static function and if a global function with
- the same name exists, lookup_symbol will eventually read in the symtab
- for the global function and clobber cur_fdr. */
+ If the pdr is for a static function and if a global function with
+ the same name exists, lookup_symbol will eventually read in the symtab
+ for the global function and clobber cur_fdr. */
FDR *save_cur_fdr = cur_fdr;
s = lookup_symbol (sh_name, NULL, VAR_NAMESPACE, 0, NULL);
cur_fdr = save_cur_fdr;
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
SYMBOL_CLASS (s) = LOC_BLOCK;
/* Donno its type, hope int is ok */
- SYMBOL_TYPE (s) = lookup_function_type (builtin_type_int);
+ SYMBOL_TYPE (s) = lookup_function_type (mdebug_type_int);
add_symbol (s, top_stack->cur_block);
/* Wont have symbols for this one */
b = new_block (2);
BLOCK_FUNCTION (b) = s;
BLOCK_START (b) = pr->adr;
/* BOUND used to be the end of procedure's text, but the
- argument is no longer passed in. */
+ argument is no longer passed in. */
BLOCK_END (b) = bound;
BLOCK_SUPERBLOCK (b) = top_stack->cur_block;
add_block (b, top_stack->cur_st);
e = (struct mips_extra_func_info *) SYMBOL_VALUE (i);
e->pdr = *pr;
e->pdr.isym = (long) s;
- e->pdr.adr += cur_fdr->adr - first_off;
+
+ /* GDB expects the absolute function start address for the
+ procedure descriptor in e->pdr.adr.
+ As the address in the procedure descriptor is usually relative,
+ we would have to relocate e->pdr.adr with cur_fdr->adr and
+ ANOFFSET (pst->section_offsets, SECT_OFF_TEXT (pst->objfile)).
+ Unfortunately cur_fdr->adr and e->pdr.adr are both absolute
+ in shared libraries on some systems, and on other systems
+ e->pdr.adr is sometimes offset by a bogus value.
+ To work around these problems, we replace e->pdr.adr with
+ the start address of the function. */
+ e->pdr.adr = BLOCK_START (b);
/* Correct incorrect setjmp procedure descriptor from the library
- to make backtrace through setjmp work. */
+ to make backtrace through setjmp work. */
if (e->pdr.pcreg == 0 && STREQ (sh_name, "setjmp"))
{
complain (&bad_setjmp_pdr_complaint, 0);
e->pdr.regmask = 0x80000000;
e->pdr.regoffset = -4;
}
-
- /* Fake PC_REGNUM for alpha __sigtramp so that read_next_frame_reg
- will use the saved user pc from the sigcontext. */
- if (STREQ (sh_name, "__sigtramp"))
- e->pdr.pcreg = PC_REGNUM;
- /* Make the same patch for Irix. */
- if (STREQ (sh_name, "_sigtramp"))
- e->pdr.pcreg = PC_REGNUM;
}
+
+ /* It would be reasonable that functions that have been compiled
+ without debugging info have a btNil type for their return value,
+ and functions that are void and are compiled with debugging info
+ have btVoid.
+ gcc and DEC f77 put out btNil types for both cases, so btNil is mapped
+ to TYPE_CODE_VOID in parse_type to get the `compiled with debugging info'
+ case right.
+ The glevel field in cur_fdr could be used to determine the presence
+ of debugging info, but GCC doesn't always pass the -g switch settings
+ to the assembler and GAS doesn't set the glevel field from the -g switch
+ settings.
+ To work around these problems, the return value type of a TYPE_CODE_VOID
+ function is adjusted accordingly if no debugging info was found in the
+ compilation unit. */
+
+ if (processing_gcc_compilation == 0
+ && found_ecoff_debugging_info == 0
+ && TYPE_CODE (TYPE_TARGET_TYPE (SYMBOL_TYPE (s))) == TYPE_CODE_VOID)
+ SYMBOL_TYPE (s) = nodebug_func_symbol_type;
+}
+
+/* Relocate the extra function info pointed to by the symbol table. */
+
+void
+ecoff_relocate_efi (struct symbol *sym, CORE_ADDR delta)
+{
+ struct mips_extra_func_info *e;
+
+ e = (struct mips_extra_func_info *) SYMBOL_VALUE (sym);
+
+ e->pdr.adr += delta;
}
/* Parse the external symbol ES. Just call parse_symbol() after
- making sure we know where the aux are for it. For procedures,
- parsing of the PDRs has already provided all the needed
- information, we only parse them if SKIP_PROCEDURES is false,
- and only if this causes no symbol duplication.
+ making sure we know where the aux are for it.
BIGEND says whether aux entries are big-endian or little-endian.
This routine clobbers top_stack->cur_block and ->cur_st. */
+static void parse_external (EXTR *, int, struct section_offsets *,
+ struct objfile *);
+
static void
-parse_external (es, skip_procedures, bigend)
- EXTR *es;
- int skip_procedures;
- int bigend;
+parse_external (EXTR *es, int bigend, struct section_offsets *section_offsets,
+ struct objfile *objfile)
{
union aux_ext *ax;
}
/* Reading .o files */
- if (es->asym.sc == scUndefined || es->asym.sc == scNil)
+ if (SC_IS_UNDEF (es->asym.sc) || es->asym.sc == scNil)
{
char *what;
switch (es->asym.st)
switch (es->asym.st)
{
case stProc:
- /* If we have full symbols we do not need more */
- if (skip_procedures)
- return;
- if (mylookup_symbol (debug_info->ssext + es->asym.iss,
- top_stack->cur_block,
- VAR_NAMESPACE, LOC_BLOCK))
- break;
- /* fall through */
+ case stStaticProc:
+ /* There is no need to parse the external procedure symbols.
+ If they are from objects compiled without -g, their index will
+ be indexNil, and the symbol definition from the minimal symbol
+ is preferrable (yielding a function returning int instead of int).
+ If the index points to a local procedure symbol, the local
+ symbol already provides the correct type.
+ Note that the index of the external procedure symbol points
+ to the local procedure symbol in the local symbol table, and
+ _not_ to the auxiliary symbol info. */
+ break;
case stGlobal:
case stLabel:
+ /* Global common symbols are resolved by the runtime loader,
+ ignore them. */
+ if (SC_IS_COMMON (es->asym.sc))
+ break;
+
/* Note that the case of a symbol with indexNil must be handled
- anyways by parse_symbol(). */
- parse_symbol (&es->asym, ax, (char *) NULL, bigend);
+ anyways by parse_symbol(). */
+ parse_symbol (&es->asym, ax, (char *) NULL, bigend, section_offsets, objfile);
break;
default:
break;
numbers can go back and forth, apparently we can live
with that and do not need to reorder our linetables */
+static void parse_lines (FDR *, PDR *, struct linetable *, int,
+ struct partial_symtab *, CORE_ADDR);
+
static void
-parse_lines (fh, pr, lt, maxlines)
- FDR *fh;
- PDR *pr;
- struct linetable *lt;
- int maxlines;
+parse_lines (FDR *fh, PDR *pr, struct linetable *lt, int maxlines,
+ struct partial_symtab *pst, CORE_ADDR lowest_pdr_addr)
{
unsigned char *base;
int j, k;
int delta, count, lineno = 0;
- unsigned long first_off = pr->adr;
if (fh->cbLine == 0)
return;
- base = debug_info->line + fh->cbLineOffset;
-
/* Scan by procedure descriptors */
k = 0;
for (j = 0; j < fh->cpd; j++, pr++)
{
- long l;
- unsigned long adr;
+ CORE_ADDR l;
+ CORE_ADDR adr;
unsigned char *halt;
/* No code for this one */
continue;
/* Determine start and end address of compressed line bytes for
- this procedure. */
+ this procedure. */
base = debug_info->line + fh->cbLineOffset;
if (j != (fh->cpd - 1))
- halt = base + pr[1].cbLineOffset;
+ halt = base + pr[1].cbLineOffset;
else
- halt = base + fh->cbLine;
+ halt = base + fh->cbLine;
base += pr->cbLineOffset;
- adr = fh->adr + pr->adr - first_off;
+ adr = pst->textlow + pr->adr - lowest_pdr_addr;
+
l = adr >> 2; /* in words */
- for (lineno = pr->lnLow; base < halt; )
+ for (lineno = pr->lnLow; base < halt;)
{
count = *base & 0x0f;
delta = *base++ >> 4;
into a partial_symtab. */
static void
-parse_partial_symbols (objfile, section_offsets)
- struct objfile *objfile;
- struct section_offsets *section_offsets;
+parse_partial_symbols (struct objfile *objfile)
{
const bfd_size_type external_sym_size = debug_swap->external_sym_size;
const bfd_size_type external_rfd_size = debug_swap->external_rfd_size;
const bfd_size_type external_ext_size = debug_swap->external_ext_size;
- void (* const swap_ext_in) PARAMS ((bfd *, PTR, EXTR *))
- = debug_swap->swap_ext_in;
- void (* const swap_sym_in) PARAMS ((bfd *, PTR, SYMR *))
- = debug_swap->swap_sym_in;
- void (* const swap_rfd_in) PARAMS ((bfd *, PTR, RFDT *))
- = debug_swap->swap_rfd_in;
+ void (*const swap_ext_in) (bfd *, PTR, EXTR *) = debug_swap->swap_ext_in;
+ void (*const swap_sym_in) (bfd *, PTR, SYMR *) = debug_swap->swap_sym_in;
+ void (*const swap_rfd_in) (bfd *, PTR, RFDT *) = debug_swap->swap_rfd_in;
int f_idx, s_idx;
HDRR *hdr = &debug_info->symbolic_header;
/* Running pointers */
EXTR *ext_in_end;
SYMR sh;
struct partial_symtab *pst;
-
+ int textlow_not_set = 1;
int past_first_source_file = 0;
/* List of current psymtab's include files */
struct cleanup *old_chain;
char *name;
enum language prev_language;
+ asection *text_sect;
+ int relocatable = 0;
+
+ /* Irix 5.2 shared libraries have a fh->adr field of zero, but
+ the shared libraries are prelinked at a high memory address.
+ We have to adjust the start address of the object file for this case,
+ by setting it to the start address of the first procedure in the file.
+ But we should do no adjustments if we are debugging a .o file, where
+ the text section (and fh->adr) really starts at zero. */
+ text_sect = bfd_get_section_by_name (cur_bfd, ".text");
+ if (text_sect != NULL
+ && (bfd_get_section_flags (cur_bfd, text_sect) & SEC_RELOC))
+ relocatable = 1;
extern_tab = (EXTR *) obstack_alloc (&objfile->psymbol_obstack,
sizeof (EXTR) * hdr->iextMax);
fdr_to_pst[f_idx].n_globals = 0;
}
+ /* ECOFF in ELF:
+
+ For ECOFF in ELF, we skip the creation of the minimal symbols.
+ The ECOFF symbols should be a subset of the Elf symbols, and the
+ section information of the elf symbols will be more accurate.
+ FIXME! What about Irix 5's native linker?
+
+ By default, Elf sections which don't exist in ECOFF
+ get put in ECOFF's absolute section by the gnu linker.
+ Since absolute sections don't get relocated, we
+ end up calculating an address different from that of
+ the symbol's minimal symbol (created earlier from the
+ Elf symtab).
+
+ To fix this, either :
+ 1) don't create the duplicate symbol
+ (assumes ECOFF symtab is a subset of the ELF symtab;
+ assumes no side-effects result from ignoring ECOFF symbol)
+ 2) create it, only if lookup for existing symbol in ELF's minimal
+ symbols fails
+ (inefficient;
+ assumes no side-effects result from ignoring ECOFF symbol)
+ 3) create it, but lookup ELF's minimal symbol and use it's section
+ during relocation, then modify "uniqify" phase to merge and
+ eliminate the duplicate symbol
+ (highly inefficient)
+
+ I've implemented #1 here...
+ Skip the creation of the minimal symbols based on the ECOFF
+ symbol table. */
+
/* Pass 2 over external syms: fill in external symbols */
ext_in = ext_block;
ext_in_end = ext_in + hdr->iextMax;
for (; ext_in < ext_in_end; ext_in++)
{
enum minimal_symbol_type ms_type = mst_text;
+ CORE_ADDR svalue = ext_in->asym.value;
/* The Irix 5 native tools seem to sometimes generate bogus
- external symbols. */
+ external symbols. */
if (ext_in->ifd < -1 || ext_in->ifd >= hdr->ifdMax)
{
complain (&bad_ext_ifd_complaint, ext_in->ifd, hdr->ifdMax);
extern_tab[fdr_to_pst[ext_in->ifd].globals_offset
+ fdr_to_pst[ext_in->ifd].n_globals++] = *ext_in;
- if (ext_in->asym.sc == scUndefined || ext_in->asym.sc == scNil)
+
+ if (SC_IS_UNDEF (ext_in->asym.sc) || ext_in->asym.sc == scNil)
continue;
+
+ /* Pass 3 over files, over local syms: fill in static symbols */
name = debug_info->ssext + ext_in->asym.iss;
+
+ /* Process ECOFF Symbol Types and Storage Classes */
switch (ext_in->asym.st)
{
case stProc:
+ /* Beginnning of Procedure */
+ svalue += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
break;
case stStaticProc:
+ /* Load time only static procs */
ms_type = mst_file_text;
+ svalue += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
break;
case stGlobal:
- if (ext_in->asym.sc == scData
- || ext_in->asym.sc == scSData
- || ext_in->asym.sc == scRData)
- ms_type = mst_data;
+ /* External symbol */
+ if (SC_IS_COMMON (ext_in->asym.sc))
+ {
+ /* The value of a common symbol is its size, not its address.
+ Ignore it. */
+ continue;
+ }
+ else if (SC_IS_DATA (ext_in->asym.sc))
+ {
+ ms_type = mst_data;
+ svalue += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile));
+ }
+ else if (SC_IS_BSS (ext_in->asym.sc))
+ {
+ ms_type = mst_bss;
+ svalue += ANOFFSET (objfile->section_offsets, SECT_OFF_BSS (objfile));
+ }
else
- ms_type = mst_bss;
+ ms_type = mst_abs;
break;
case stLabel:
- if (ext_in->asym.sc == scAbs)
- ms_type = mst_abs;
- else if (ext_in->asym.sc == scText)
- ms_type = mst_text;
- else if (ext_in->asym.sc == scData
- || ext_in->asym.sc == scSData
- || ext_in->asym.sc == scRData)
- ms_type = mst_data;
+ /* Label */
+ if (SC_IS_TEXT (ext_in->asym.sc))
+ {
+ ms_type = mst_file_text;
+ svalue += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
+ }
+ else if (SC_IS_DATA (ext_in->asym.sc))
+ {
+ ms_type = mst_file_data;
+ svalue += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile));
+ }
+ else if (SC_IS_BSS (ext_in->asym.sc))
+ {
+ ms_type = mst_file_bss;
+ svalue += ANOFFSET (objfile->section_offsets, SECT_OFF_BSS (objfile));
+ }
else
- ms_type = mst_bss;
+ ms_type = mst_abs;
break;
case stLocal:
+ case stNil:
/* The alpha has the section start addresses in stLocal symbols
whose name starts with a `.'. Skip those but complain for all
- other stLocal symbols. */
+ other stLocal symbols.
+ Irix6 puts the section start addresses in stNil symbols, skip
+ those too. */
if (name[0] == '.')
continue;
/* Fall through. */
ms_type = mst_unknown;
complain (&unknown_ext_complaint, name);
}
- prim_record_minimal_symbol (name, ext_in->asym.value, ms_type, objfile);
+ if (!ECOFF_IN_ELF (cur_bfd))
+ prim_record_minimal_symbol (name, svalue, ms_type, objfile);
}
/* Pass 3 over files, over local syms: fill in static symbols */
{
struct partial_symtab *save_pst;
EXTR *ext_ptr;
+ CORE_ADDR textlow;
cur_fdr = fh = debug_info->fdr + f_idx;
fdr_to_pst[f_idx].pst = NULL;
continue;
}
- pst = start_psymtab_common (objfile, section_offsets,
+
+ /* Determine the start address for this object file from the
+ file header and relocate it, except for Irix 5.2 zero fh->adr. */
+ if (fh->cpd)
+ {
+ textlow = fh->adr;
+ if (relocatable || textlow != 0)
+ textlow += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
+ }
+ else
+ textlow = 0;
+ pst = start_psymtab_common (objfile, objfile->section_offsets,
fdr_name (fh),
- fh->cpd ? fh->adr : 0,
+ textlow,
objfile->global_psymbols.next,
objfile->static_psymbols.next);
pst->read_symtab_private = ((char *)
/* Set up language for the pst.
The language from the FDR is used if it is unambigious (e.g. cfront
- with native cc and g++ will set the language to C).
- Otherwise we have to deduce the language from the filename.
- Native ecoff has every header file in a separate FDR, so
- deduce_language_from_filename will return language_unknown for
- a header file, which is not what we want.
- But the FDRs for the header files are after the FDR for the source
- file, so we can assign the language of the source file to the
- following header files. Then we save the language in the private
- pst data so that we can reuse it when building symtabs. */
+ with native cc and g++ will set the language to C).
+ Otherwise we have to deduce the language from the filename.
+ Native ecoff has every header file in a separate FDR, so
+ deduce_language_from_filename will return language_unknown for
+ a header file, which is not what we want.
+ But the FDRs for the header files are after the FDR for the source
+ file, so we can assign the language of the source file to the
+ following header files. Then we save the language in the private
+ pst data so that we can reuse it when building symtabs. */
prev_language = psymtab_language;
switch (fh->lang)
pst->texthigh = pst->textlow;
/* For stabs-in-ecoff files, the second symbol must be @stab.
- This symbol is emitted by mips-tfile to signal that the
- current object file uses encapsulated stabs instead of mips
- ecoff for local symbols. (It is the second symbol because
- the first symbol is the stFile used to signal the start of a
- file). */
+ This symbol is emitted by mips-tfile to signal that the
+ current object file uses encapsulated stabs instead of mips
+ ecoff for local symbols. (It is the second symbol because
+ the first symbol is the stFile used to signal the start of a
+ file). */
processing_gcc_compilation = 0;
if (fh->csym >= 2)
{
(*swap_sym_in) (cur_bfd,
(((char *) debug_info->external_sym)
- + (fh->isymBase + cur_sdx) * external_sym_size),
+ + (fh->isymBase + cur_sdx) * external_sym_size),
&sh);
type_code = ECOFF_UNMARK_STAB (sh.index);
if (!ECOFF_IS_STAB (&sh))
{
if (sh.st == stProc || sh.st == stStaticProc)
{
- long procaddr = sh.value;
+ CORE_ADDR procaddr;
long isym;
+ sh.value += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
+ if (sh.st == stStaticProc)
+ {
+ namestring = debug_info->ss + fh->issBase + sh.iss;
+ prim_record_minimal_symbol_and_info (namestring,
+ sh.value,
+ mst_file_text,
+ NULL,
+ SECT_OFF_TEXT (objfile),
+ NULL,
+ objfile);
+ }
+ procaddr = sh.value;
isym = AUX_GET_ISYM (fh->fBigendian,
(debug_info->external_aux
&sh);
if (sh.st == stEnd)
{
- long high = procaddr + sh.value;
+ CORE_ADDR high = procaddr + sh.value;
+
+ /* Kludge for Irix 5.2 zero fh->adr. */
+ if (!relocatable
+ && (pst->textlow == 0 || procaddr < pst->textlow))
+ pst->textlow = procaddr;
if (high > pst->texthigh)
pst->texthigh = high;
}
}
+ else if (sh.st == stStatic)
+ {
+ switch (sh.sc)
+ {
+ case scUndefined:
+ case scSUndefined:
+ case scNil:
+ case scAbs:
+ break;
+
+ case scData:
+ case scSData:
+ case scRData:
+ case scPData:
+ case scXData:
+ namestring = debug_info->ss + fh->issBase + sh.iss;
+ sh.value += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile));
+ prim_record_minimal_symbol_and_info (namestring,
+ sh.value,
+ mst_file_data,
+ NULL,
+ SECT_OFF_DATA (objfile),
+ NULL,
+ objfile);
+ break;
+
+ default:
+ /* FIXME! Shouldn't this use cases for bss,
+ then have the default be abs? */
+ namestring = debug_info->ss + fh->issBase + sh.iss;
+ sh.value += ANOFFSET (objfile->section_offsets, SECT_OFF_BSS (objfile));
+ prim_record_minimal_symbol_and_info (namestring,
+ sh.value,
+ mst_file_bss,
+ NULL,
+ SECT_OFF_BSS (objfile),
+ NULL,
+ objfile);
+ break;
+ }
+ }
continue;
}
+ /* Handle stabs continuation */
+ {
+ char *stabstring = debug_info->ss + fh->issBase + sh.iss;
+ int len = strlen (stabstring);
+ while (stabstring[len - 1] == '\\')
+ {
+ SYMR sh2;
+ char *stabstring1 = stabstring;
+ char *stabstring2;
+ int len2;
+
+ /* Ignore continuation char from 1st string */
+ len--;
+
+ /* Read next stabstring */
+ cur_sdx++;
+ (*swap_sym_in) (cur_bfd,
+ (((char *) debug_info->external_sym)
+ + (fh->isymBase + cur_sdx)
+ * external_sym_size),
+ &sh2);
+ stabstring2 = debug_info->ss + fh->issBase + sh2.iss;
+ len2 = strlen (stabstring2);
+
+ /* Concatinate stabstring2 with stabstring1 */
+ if (stabstring
+ && stabstring != debug_info->ss + fh->issBase + sh.iss)
+ stabstring = xrealloc (stabstring, len + len2 + 1);
+ else
+ stabstring = xmalloc (len + len2 + 1);
+ strcpy (stabstring, stabstring1);
+ strcpy (stabstring + len, stabstring2);
+ len += len2;
+ }
+
#define SET_NAMESTRING() \
- namestring = debug_info->ss + fh->issBase + sh.iss
+ namestring = stabstring
#define CUR_SYMBOL_TYPE type_code
#define CUR_SYMBOL_VALUE sh.value
-#define START_PSYMTAB(ofile,secoff,fname,low,symoff,global_syms,static_syms)\
- pst = save_pst
-#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps) (void)0
+#define START_PSYMTAB(ofile,fname,low,symoff,global_syms,static_syms)\
+ (pst = save_pst)
+#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps,textlow_not_set) (void)0
#define HANDLE_RBRAC(val) \
if ((val) > save_pst->texthigh) save_pst->texthigh = (val);
#include "partial-stab.h"
+
+ if (stabstring
+ && stabstring != debug_info->ss + fh->issBase + sh.iss)
+ free (stabstring);
+ }
+ /* end - Handle continuation */
}
}
else
}
/* Non absolute static symbols go into the minimal table. */
- if (sh.sc == scUndefined || sh.sc == scNil
+ if (SC_IS_UNDEF (sh.sc) || sh.sc == scNil
|| (sh.index == indexNil
&& (sh.st != stStatic || sh.sc == scAbs)))
{
name = debug_info->ss + fh->issBase + sh.iss;
+ switch (sh.sc)
+ {
+ case scText:
+ case scRConst:
+ /* The value of a stEnd symbol is the displacement from the
+ corresponding start symbol value, do not relocate it. */
+ if (sh.st != stEnd)
+ sh.value += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
+ break;
+ case scData:
+ case scSData:
+ case scRData:
+ case scPData:
+ case scXData:
+ sh.value += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile));
+ break;
+ case scBss:
+ case scSBss:
+ sh.value += ANOFFSET (objfile->section_offsets, SECT_OFF_BSS (objfile));
+ break;
+ }
+
switch (sh.st)
{
- long high;
- long procaddr;
+ CORE_ADDR high;
+ CORE_ADDR procaddr;
int new_sdx;
- case stStaticProc: /* Function */
- /* I believe this is used only for file-local functions.
- The comment in symconst.h ("load time only static procs")
- isn't particularly clear on this point. */
- prim_record_minimal_symbol (name, sh.value, mst_file_text,
- objfile);
+ case stStaticProc:
+ prim_record_minimal_symbol_and_info (name, sh.value,
+ mst_file_text, NULL,
+ SECT_OFF_TEXT (objfile), NULL,
+ objfile);
+
/* FALLTHROUGH */
- case stProc: /* Asm labels apparently */
- ADD_PSYMBOL_TO_LIST (name, strlen (name),
- VAR_NAMESPACE, LOC_BLOCK,
- objfile->static_psymbols, sh.value,
- psymtab_language, objfile);
+ case stProc:
+ /* Usually there is a local and a global stProc symbol
+ for a function. This means that the function name
+ has already been entered into the mimimal symbol table
+ while processing the global symbols in pass 2 above.
+ One notable exception is the PROGRAM name from
+ f77 compiled executables, it is only put out as
+ local stProc symbol, and a global MAIN__ stProc symbol
+ points to it. It doesn't matter though, as gdb is
+ still able to find the PROGRAM name via the partial
+ symbol table, and the MAIN__ symbol via the minimal
+ symbol table. */
+ if (sh.st == stProc)
+ add_psymbol_to_list (name, strlen (name),
+ VAR_NAMESPACE, LOC_BLOCK,
+ &objfile->global_psymbols,
+ 0, sh.value, psymtab_language, objfile);
+ else
+ add_psymbol_to_list (name, strlen (name),
+ VAR_NAMESPACE, LOC_BLOCK,
+ &objfile->static_psymbols,
+ 0, sh.value, psymtab_language, objfile);
+
/* Skip over procedure to next one. */
if (sh.index >= hdr->iauxMax)
{
/* Should not happen, but does when cross-compiling
- with the MIPS compiler. FIXME -- pull later. */
+ with the MIPS compiler. FIXME -- pull later. */
complain (&index_complaint, name);
new_sdx = cur_sdx + 1; /* Don't skip at all */
}
&sh);
if (sh.st != stEnd)
continue;
+
+ /* Kludge for Irix 5.2 zero fh->adr. */
+ if (!relocatable
+ && (pst->textlow == 0 || procaddr < pst->textlow))
+ pst->textlow = procaddr;
+
high = procaddr + sh.value;
if (high > pst->texthigh)
pst->texthigh = high;
continue;
case stStatic: /* Variable */
- if (sh.sc == scData || sh.sc == scSData || sh.sc == scRData)
- prim_record_minimal_symbol (name, sh.value, mst_file_data,
- objfile);
+ if (SC_IS_DATA (sh.sc))
+ prim_record_minimal_symbol_and_info (name, sh.value,
+ mst_file_data, NULL,
+ SECT_OFF_DATA (objfile),
+ NULL,
+ objfile);
else
- prim_record_minimal_symbol (name, sh.value, mst_file_bss,
- objfile);
+ prim_record_minimal_symbol_and_info (name, sh.value,
+ mst_file_bss, NULL,
+ SECT_OFF_BSS (objfile),
+ NULL,
+ objfile);
class = LOC_STATIC;
break;
- case stTypedef:/* Typedef */
+ case stIndirect: /* Irix5 forward declaration */
+ /* Skip forward declarations from Irix5 cc */
+ goto skip;
+
+ case stTypedef: /* Typedef */
/* Skip typedefs for forward declarations and opaque
- structs from alpha cc. */
- if (sh.iss == 0)
+ structs from alpha and mips cc. */
+ if (sh.iss == 0 || has_opaque_xref (fh, &sh))
goto skip;
class = LOC_TYPEDEF;
break;
case stUnion:
case stStruct:
case stEnum:
- case stBlock: /* { }, str, un, enum*/
+ case stBlock: /* { }, str, un, enum */
/* Do not create a partial symbol for cc unnamed aggregates
and gcc empty aggregates. */
- if ((sh.sc == scInfo || sh.sc == scCommon)
+ if ((sh.sc == scInfo
+ || SC_IS_COMMON (sh.sc))
&& sh.iss != 0
&& sh.index != cur_sdx + 2)
{
- ADD_PSYMBOL_TO_LIST (name, strlen (name),
+ add_psymbol_to_list (name, strlen (name),
STRUCT_NAMESPACE, LOC_TYPEDEF,
- objfile->static_psymbols,
- sh.value,
+ &objfile->static_psymbols,
+ 0, (CORE_ADDR) 0,
psymtab_language, objfile);
}
+ handle_psymbol_enumerators (objfile, fh, sh.st, sh.value);
+
/* Skip over the block */
new_sdx = sh.index;
if (new_sdx <= cur_sdx)
continue;
}
/* Use this gdb symbol */
- ADD_PSYMBOL_TO_LIST (name, strlen (name),
+ add_psymbol_to_list (name, strlen (name),
VAR_NAMESPACE, class,
- objfile->static_psymbols, sh.value,
- psymtab_language, objfile);
+ &objfile->static_psymbols,
+ 0, sh.value, psymtab_language, objfile);
skip:
cur_sdx++; /* Go to next file symbol */
}
enum address_class class;
SYMR *psh;
char *name;
+ CORE_ADDR svalue;
if (ext_ptr->ifd != f_idx)
abort ();
psh = &ext_ptr->asym;
/* Do not add undefined symbols to the partial symbol table. */
- if (psh->sc == scUndefined || psh->sc == scNil)
+ if (SC_IS_UNDEF (psh->sc) || psh->sc == scNil)
continue;
+ svalue = psh->value;
+ switch (psh->sc)
+ {
+ case scText:
+ case scRConst:
+ svalue += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
+ break;
+ case scData:
+ case scSData:
+ case scRData:
+ case scPData:
+ case scXData:
+ svalue += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile));
+ break;
+ case scBss:
+ case scSBss:
+ svalue += ANOFFSET (objfile->section_offsets, SECT_OFF_BSS (objfile));
+ break;
+ }
+
switch (psh->st)
{
case stNil:
continue;
case stProc:
case stStaticProc:
- class = LOC_BLOCK;
- break;
+ /* External procedure symbols have been entered
+ into the minimal symbol table in pass 2 above.
+ Ignore them, as parse_external will ignore them too. */
+ continue;
case stLabel:
class = LOC_LABEL;
break;
debug_info->ssext + psh->iss);
/* Fall through, pretend it's global. */
case stGlobal:
+ /* Global common symbols are resolved by the runtime loader,
+ ignore them. */
+ if (SC_IS_COMMON (psh->sc))
+ continue;
+
class = LOC_STATIC;
break;
}
name = debug_info->ssext + psh->iss;
- ADD_PSYMBOL_ADDR_TO_LIST (name, strlen (name),
- VAR_NAMESPACE, class,
- objfile->global_psymbols,
- (CORE_ADDR) psh->value,
- psymtab_language, objfile);
+ add_psymbol_to_list (name, strlen (name),
+ VAR_NAMESPACE, class,
+ &objfile->global_psymbols,
+ 0, svalue,
+ psymtab_language, objfile);
}
}
/* Link pst to FDR. end_psymtab returns NULL if the psymtab was
- empty and put on the free list. */
+ empty and put on the free list. */
fdr_to_pst[f_idx].pst = end_psymtab (save_pst,
- psymtab_include_list, includes_used,
+ psymtab_include_list, includes_used,
-1, save_pst->texthigh,
- dependency_list, dependencies_used);
+ dependency_list, dependencies_used, textlow_not_set);
+ includes_used = 0;
+ dependencies_used = 0;
+
if (objfile->ei.entry_point >= save_pst->textlow &&
objfile->ei.entry_point < save_pst->texthigh)
{
objfile->ei.entry_file_lowpc = save_pst->textlow;
objfile->ei.entry_file_highpc = save_pst->texthigh;
}
+
+ /* The objfile has its functions reordered if this partial symbol
+ table overlaps any other partial symbol table.
+ We cannot assume a reordered objfile if a partial symbol table
+ is contained within another partial symbol table, as partial symbol
+ tables for include files with executable code are contained
+ within the partial symbol table for the including source file,
+ and we do not want to flag the objfile reordered for these cases.
+
+ This strategy works well for Irix-5.2 shared libraries, but we
+ might have to use a more elaborate (and slower) algorithm for
+ other cases. */
+ save_pst = fdr_to_pst[f_idx].pst;
+ if (save_pst != NULL
+ && save_pst->textlow != 0
+ && !(objfile->flags & OBJF_REORDERED))
+ {
+ ALL_OBJFILE_PSYMTABS (objfile, pst)
+ {
+ if (save_pst != pst
+ && save_pst->textlow >= pst->textlow
+ && save_pst->textlow < pst->texthigh
+ && save_pst->texthigh > pst->texthigh)
+ {
+ objfile->flags |= OBJF_REORDERED;
+ break;
+ }
+ }
+ }
}
/* Now scan the FDRs for dependencies */
fh = f_idx + debug_info->fdr;
pst = fdr_to_pst[f_idx].pst;
- if (pst == (struct partial_symtab *)NULL)
+ if (pst == (struct partial_symtab *) NULL)
continue;
/* This should catch stabs-in-ecoff. */
continue;
/* Skip the first file indirect entry as it is a self dependency
- for source files or a reverse .h -> .c dependency for header files. */
+ for source files or a reverse .h -> .c dependency for header files. */
pst->number_of_dependencies = 0;
pst->dependencies =
((struct partial_symtab **)
continue;
/* Do not add to dependeny list if psymtab was empty. */
- if (fdr_to_pst[rh].pst == (struct partial_symtab *)NULL)
+ if (fdr_to_pst[rh].pst == (struct partial_symtab *) NULL)
continue;
pst->dependencies[pst->number_of_dependencies++] = fdr_to_pst[rh].pst;
}
}
+
+ /* Remove the dummy psymtab created for -O3 images above, if it is
+ still empty, to enable the detection of stripped executables. */
+ if (objfile->psymtabs->next == NULL
+ && objfile->psymtabs->number_of_dependencies == 0
+ && objfile->psymtabs->n_global_syms == 0
+ && objfile->psymtabs->n_static_syms == 0)
+ objfile->psymtabs = NULL;
do_cleanups (old_chain);
}
+/* If the current psymbol has an enumerated type, we need to add
+ all the the enum constants to the partial symbol table. */
+
+static void
+handle_psymbol_enumerators (struct objfile *objfile, FDR *fh, int stype,
+ CORE_ADDR svalue)
+{
+ const bfd_size_type external_sym_size = debug_swap->external_sym_size;
+ void (*const swap_sym_in) (bfd *, PTR, SYMR *) = debug_swap->swap_sym_in;
+ char *ext_sym = ((char *) debug_info->external_sym
+ + ((fh->isymBase + cur_sdx + 1) * external_sym_size));
+ SYMR sh;
+ TIR tir;
+
+ switch (stype)
+ {
+ case stEnum:
+ break;
+
+ case stBlock:
+ /* It is an enumerated type if the next symbol entry is a stMember
+ and its auxiliary index is indexNil or its auxiliary entry
+ is a plain btNil or btVoid.
+ Alpha cc -migrate enums are recognized by a zero index and
+ a zero symbol value.
+ DU 4.0 cc enums are recognized by a member type of btEnum without
+ qualifiers and a zero symbol value. */
+ (*swap_sym_in) (cur_bfd, ext_sym, &sh);
+ if (sh.st != stMember)
+ return;
+
+ if (sh.index == indexNil
+ || (sh.index == 0 && svalue == 0))
+ break;
+ (*debug_swap->swap_tir_in) (fh->fBigendian,
+ &(debug_info->external_aux
+ + fh->iauxBase + sh.index)->a_ti,
+ &tir);
+ if ((tir.bt != btNil
+ && tir.bt != btVoid
+ && (tir.bt != btEnum || svalue != 0))
+ || tir.tq0 != tqNil)
+ return;
+ break;
+
+ default:
+ return;
+ }
+
+ for (;;)
+ {
+ char *name;
+
+ (*swap_sym_in) (cur_bfd, ext_sym, &sh);
+ if (sh.st != stMember)
+ break;
+ name = debug_info->ss + cur_fdr->issBase + sh.iss;
+
+ /* Note that the value doesn't matter for enum constants
+ in psymtabs, just in symtabs. */
+ add_psymbol_to_list (name, strlen (name),
+ VAR_NAMESPACE, LOC_CONST,
+ &objfile->static_psymbols, 0,
+ (CORE_ADDR) 0, psymtab_language, objfile);
+ ext_sym += external_sym_size;
+ }
+}
static char *
-mdebug_next_symbol_text ()
+mdebug_next_symbol_text (objfile)
+ struct objfile *objfile; /* argument objfile is currently unused */
{
SYMR sh;
The flow of control and even the memory allocation differs. FIXME. */
static void
-psymtab_to_symtab_1 (pst, filename)
- struct partial_symtab *pst;
- char *filename;
+psymtab_to_symtab_1 (struct partial_symtab *pst, char *filename)
{
bfd_size_type external_sym_size;
bfd_size_type external_pdr_size;
- void (*swap_sym_in) PARAMS ((bfd *, PTR, SYMR *));
- void (*swap_pdr_in) PARAMS ((bfd *, PTR, PDR *));
+ void (*swap_sym_in) (bfd *, PTR, SYMR *);
+ void (*swap_pdr_in) (bfd *, PTR, PDR *);
int i;
struct symtab *st;
FDR *fh;
struct linetable *lines;
+ CORE_ADDR lowest_pdr_addr = 0;
if (pst->readin)
return;
if (processing_gcc_compilation != 0)
{
- char *pdr_ptr;
- char *pdr_end;
- int first_pdr;
- unsigned long first_off = 0;
/* This symbol table contains stabs-in-ecoff entries. */
&sh);
name = debug_info->ss + fh->issBase + sh.iss;
valu = sh.value;
- if (ECOFF_IS_STAB (&sh))
+ /* XXX This is a hack. It will go away! */
+ if (ECOFF_IS_STAB (&sh) || (name[0] == '#'))
{
int type_code = ECOFF_UNMARK_STAB (sh.index);
/* We should never get non N_STAB symbols here, but they
- should be harmless, so keep process_one_symbol from
- complaining about them. */
+ should be harmless, so keep process_one_symbol from
+ complaining about them. */
if (type_code & N_STAB)
{
process_one_symbol (type_code, 0, valu, name,
pst->section_offsets, pst->objfile);
}
+ /* Similarly a hack. */
+ else if (name[0] == '#')
+ {
+ process_one_symbol (N_SLINE, 0, valu, name,
+ pst->section_offsets, pst->objfile);
+ }
if (type_code == N_FUN)
{
/* Make up special symbol to contain
procedure specific info */
struct mips_extra_func_info *e =
- ((struct mips_extra_func_info *)
- obstack_alloc (¤t_objfile->symbol_obstack,
- sizeof (struct mips_extra_func_info)));
+ ((struct mips_extra_func_info *)
+ obstack_alloc (¤t_objfile->symbol_obstack,
+ sizeof (struct mips_extra_func_info)));
struct symbol *s = new_symbol (MIPS_EFI_SYMBOL_NAME);
+
+ memset ((PTR) e, 0, sizeof (struct mips_extra_func_info));
SYMBOL_NAMESPACE (s) = LABEL_NAMESPACE;
SYMBOL_CLASS (s) = LOC_CONST;
- SYMBOL_TYPE (s) = builtin_type_void;
+ SYMBOL_TYPE (s) = mdebug_type_void;
SYMBOL_VALUE (s) = (long) e;
+ e->pdr.framereg = -1;
add_symbol_to_list (s, &local_symbols);
}
}
- else if (sh.st == stLabel && sh.index != indexNil)
+ else if (sh.st == stLabel)
{
- /* Handle encoded stab line number. */
- record_line (current_subfile, sh.index, valu);
+ if (sh.index == indexNil)
+ {
+ /* This is what the gcc2_compiled and __gnu_compiled_*
+ show up as. So don't complain. */
+ ;
+ }
+ else
+ {
+ /* Handle encoded stab line number. */
+ valu += ANOFFSET (pst->section_offsets, SECT_OFF_TEXT (pst->objfile));
+ record_line (current_subfile, sh.index, valu);
+ }
}
- else if (sh.st == stProc || sh.st == stStaticProc || sh.st == stEnd)
+ else if (sh.st == stProc || sh.st == stStaticProc
+ || sh.st == stStatic || sh.st == stEnd)
/* These are generated by gcc-2.x, do not complain */
;
else
complain (&stab_unknown_complaint, name);
}
- st = end_symtab (pst->texthigh, 0, 0, pst->objfile, SECT_OFF_TEXT);
+ st = end_symtab (pst->texthigh, pst->objfile, SECT_OFF_TEXT (pst->objfile));
end_stabs ();
/* Sort the symbol table now, we are done adding symbols to it.
- We must do this before parse_procedure calls lookup_symbol. */
+ We must do this before parse_procedure calls lookup_symbol. */
sort_symtab_syms (st);
- /* This may not be necessary for stabs symtabs. FIXME. */
- sort_blocks (st);
+ /* There used to be a call to sort_blocks here, but this should not
+ be necessary for stabs symtabs. And as sort_blocks modifies the
+ start address of the GLOBAL_BLOCK to the FIRST_LOCAL_BLOCK,
+ it did the wrong thing if the first procedure in a file was
+ generated via asm statements. */
/* Fill in procedure info next. */
- first_pdr = 1;
- pdr_ptr = ((char *) debug_info->external_pdr
- + fh->ipdFirst * external_pdr_size);
- pdr_end = pdr_ptr + fh->cpd * external_pdr_size;
- for (; pdr_ptr < pdr_end; pdr_ptr += external_pdr_size)
+ if (fh->cpd > 0)
{
- PDR pr;
-
- (*swap_pdr_in) (cur_bfd, pdr_ptr, &pr);
- if (first_pdr)
+ PDR *pr_block;
+ struct cleanup *old_chain;
+ char *pdr_ptr;
+ char *pdr_end;
+ PDR *pdr_in;
+ PDR *pdr_in_end;
+
+ pr_block = (PDR *) xmalloc (fh->cpd * sizeof (PDR));
+ old_chain = make_cleanup (free, pr_block);
+
+ pdr_ptr = ((char *) debug_info->external_pdr
+ + fh->ipdFirst * external_pdr_size);
+ pdr_end = pdr_ptr + fh->cpd * external_pdr_size;
+ pdr_in = pr_block;
+ for (;
+ pdr_ptr < pdr_end;
+ pdr_ptr += external_pdr_size, pdr_in++)
{
- first_off = pr.adr;
- first_pdr = 0;
+ (*swap_pdr_in) (cur_bfd, pdr_ptr, pdr_in);
+
+ /* Determine lowest PDR address, the PDRs are not always
+ sorted. */
+ if (pdr_in == pr_block)
+ lowest_pdr_addr = pdr_in->adr;
+ else if (pdr_in->adr < lowest_pdr_addr)
+ lowest_pdr_addr = pdr_in->adr;
}
- parse_procedure (&pr, st, first_off);
+
+ pdr_in = pr_block;
+ pdr_in_end = pdr_in + fh->cpd;
+ for (; pdr_in < pdr_in_end; pdr_in++)
+ parse_procedure (pdr_in, st, pst);
+
+ do_cleanups (old_chain);
}
}
else
{
/* This symbol table contains ordinary ecoff entries. */
- /* FIXME: doesn't use pst->section_offsets. */
-
int f_max;
int maxlines;
EXTR *ext_ptr;
top_stack->cur_st = st;
top_stack->cur_block = BLOCKVECTOR_BLOCK (BLOCKVECTOR (st),
STATIC_BLOCK);
- BLOCK_START (top_stack->cur_block) = fh ? fh->adr : 0;
+ BLOCK_START (top_stack->cur_block) = pst->textlow;
BLOCK_END (top_stack->cur_block) = 0;
top_stack->blocktype = stFile;
top_stack->maxsyms = 2 * f_max;
top_stack->cur_type = 0;
top_stack->procadr = 0;
top_stack->numargs = 0;
+ found_ecoff_debugging_info = 0;
if (fh)
{
(*swap_sym_in) (cur_bfd, sym_ptr, &sh);
c = parse_symbol (&sh,
debug_info->external_aux + fh->iauxBase,
- sym_ptr, fh->fBigendian);
+ sym_ptr, fh->fBigendian, pst->section_offsets, pst->objfile);
sym_ptr += c * external_sym_size;
}
for (;
pdr_ptr < pdr_end;
pdr_ptr += external_pdr_size, pdr_in++)
- (*swap_pdr_in) (cur_bfd, pdr_ptr, pdr_in);
+ {
+ (*swap_pdr_in) (cur_bfd, pdr_ptr, pdr_in);
+
+ /* Determine lowest PDR address, the PDRs are not always
+ sorted. */
+ if (pdr_in == pr_block)
+ lowest_pdr_addr = pdr_in->adr;
+ else if (pdr_in->adr < lowest_pdr_addr)
+ lowest_pdr_addr = pdr_in->adr;
+ }
- parse_lines (fh, pr_block, lines, maxlines);
+ parse_lines (fh, pr_block, lines, maxlines, pst, lowest_pdr_addr);
if (lines->nitems < fh->cline)
lines = shrink_linetable (lines);
pdr_in = pr_block;
pdr_in_end = pdr_in + fh->cpd;
for (; pdr_in < pdr_in_end; pdr_in++)
- parse_procedure (pdr_in, 0, pr_block->adr);
+ parse_procedure (pdr_in, 0, pst);
do_cleanups (old_chain);
}
LINETABLE (st) = lines;
/* .. and our share of externals.
- XXX use the global list to speed up things here. how?
- FIXME, Maybe quit once we have found the right number of ext's? */
+ XXX use the global list to speed up things here. how?
+ FIXME, Maybe quit once we have found the right number of ext's? */
top_stack->cur_st = st;
top_stack->cur_block = BLOCKVECTOR_BLOCK (BLOCKVECTOR (top_stack->cur_st),
GLOBAL_BLOCK);
ext_ptr = PST_PRIVATE (pst)->extern_tab;
for (i = PST_PRIVATE (pst)->extern_count; --i >= 0; ext_ptr++)
- parse_external (ext_ptr, 1, fh->fBigendian);
+ parse_external (ext_ptr, fh->fBigendian, pst->section_offsets, pst->objfile);
/* If there are undefined symbols, tell the user.
- The alpha has an undefined symbol for every symbol that is
- from a shared library, so tell the user only if verbose is on. */
+ The alpha has an undefined symbol for every symbol that is
+ from a shared library, so tell the user only if verbose is on. */
if (info_verbose && n_undef_symbols)
{
printf_filtered ("File %s contains %d unresolved references:",
}
pop_parse_stack ();
- /* Sort the symbol table now, we are done adding symbols to it.*/
+ st->primary = 1;
+
+ /* Sort the symbol table now, we are done adding symbols to it. */
sort_symtab_syms (st);
sort_blocks (st);
\f
/* Ancillary parsing procedures. */
+/* Return 1 if the symbol pointed to by SH has a cross reference
+ to an opaque aggregate type, else 0. */
+
+static int
+has_opaque_xref (FDR *fh, SYMR *sh)
+{
+ TIR tir;
+ union aux_ext *ax;
+ RNDXR rn[1];
+ unsigned int rf;
+
+ if (sh->index == indexNil)
+ return 0;
+
+ ax = debug_info->external_aux + fh->iauxBase + sh->index;
+ (*debug_swap->swap_tir_in) (fh->fBigendian, &ax->a_ti, &tir);
+ if (tir.bt != btStruct && tir.bt != btUnion && tir.bt != btEnum)
+ return 0;
+
+ ax++;
+ (*debug_swap->swap_rndx_in) (fh->fBigendian, &ax->a_rndx, rn);
+ if (rn->rfd == 0xfff)
+ rf = AUX_GET_ISYM (fh->fBigendian, ax + 1);
+ else
+ rf = rn->rfd;
+ if (rf != -1)
+ return 0;
+ return 1;
+}
+
/* Lookup the type at relative index RN. Return it in TPP
if found and in any event come up with its name PNAME.
BIGEND says whether aux symbols are big-endian or not (from fh->fBigendian).
Return value says how many aux symbols we ate. */
static int
-cross_ref (fd, ax, tpp, type_code, pname, bigend, sym_name)
- int fd;
- union aux_ext *ax;
- struct type **tpp;
- enum type_code type_code; /* Use to alloc new type if none is found. */
- char **pname;
- int bigend;
- char *sym_name;
+cross_ref (int fd, union aux_ext *ax, struct type **tpp, enum type_code type_code, /* Use to alloc new type if none is found. */
+ char **pname, int bigend, char *sym_name)
{
RNDXR rn[1];
unsigned int rf;
int xref_fd;
struct mdebug_pending *pend;
- *tpp = (struct type *)NULL;
+ *tpp = (struct type *) NULL;
- ecoff_swap_rndx_in (bigend, &ax->a_rndx, rn);
+ (*debug_swap->swap_rndx_in) (bigend, &ax->a_rndx, rn);
/* Escape index means 'the next one' */
if (rn->rfd == 0xfff)
}
/* mips cc uses a rf of -1 for opaque struct definitions.
- Set TYPE_FLAG_STUB for these types so that check_stub_type will
+ Set TYPE_FLAG_STUB for these types so that check_typedef will
resolve them if the struct gets defined in another compilation unit. */
if (rf == -1)
{
(*debug_swap->swap_sym_in) (cur_bfd, esh, &sh);
/* Make sure that this type of cross reference can be handled. */
- if (sh.sc != scInfo
- || (sh.st != stBlock && sh.st != stTypedef
- && sh.st != stStruct && sh.st != stUnion
- && sh.st != stEnum))
+ if ((sh.sc != scInfo
+ || (sh.st != stBlock && sh.st != stTypedef && sh.st != stIndirect
+ && sh.st != stStruct && sh.st != stUnion
+ && sh.st != stEnum))
+ && (sh.st != stBlock || !SC_IS_COMMON (sh.sc)))
{
/* File indirect entry is corrupt. */
*pname = "<illegal>";
{
/* We have not yet seen this type. */
- if (sh.iss == 0 && sh.st == stTypedef)
+ if ((sh.iss == 0 && sh.st == stTypedef) || sh.st == stIndirect)
{
TIR tir;
/* alpha cc puts out a stTypedef with a sh.iss of zero for
two cases:
a) forward declarations of structs/unions/enums which are not
- defined in this compilation unit.
- For these the type will be void. This is a bad design decision
- as cross referencing across compilation units is impossible
- due to the missing name.
- b) forward declarations of structs/unions/enums which are defined
- later in this file or in another file in the same compilation
- unit. Simply cross reference those again to get the
- true type.
+ defined in this compilation unit.
+ For these the type will be void. This is a bad design decision
+ as cross referencing across compilation units is impossible
+ due to the missing name.
+ b) forward declarations of structs/unions/enums/typedefs which
+ are defined later in this file or in another file in the same
+ compilation unit. Irix5 cc uses a stIndirect symbol for this.
+ Simply cross reference those again to get the true type.
The forward references are not entered in the pending list and
in the symbol table. */
- ecoff_swap_tir_in (bigend,
- &(debug_info->external_aux
- + fh->iauxBase + sh.index)->a_ti,
- &tir);
+ (*debug_swap->swap_tir_in) (bigend,
+ &(debug_info->external_aux
+ + fh->iauxBase + sh.index)->a_ti,
+ &tir);
if (tir.tq0 != tqNil)
complain (&illegal_forward_tq0_complaint, sym_name);
switch (tir.bt)
case btVoid:
*tpp = init_type (type_code, 0, 0, (char *) NULL,
current_objfile);
- *pname = "<undefined>";
+ *pname = "<undefined>";
break;
case btStruct:
fh->fBigendian, sym_name);
break;
+ case btTypedef:
+ /* Follow a forward typedef. This might recursively
+ call cross_ref till we get a non typedef'ed type.
+ FIXME: This is not correct behaviour, but gdb currently
+ cannot handle typedefs without type copying. Type
+ copying is impossible as we might have mutual forward
+ references between two files and the copied type would not
+ get filled in when we later parse its definition. */
+ *tpp = parse_type (xref_fd,
+ debug_info->external_aux + fh->iauxBase,
+ sh.index,
+ (int *) NULL,
+ fh->fBigendian,
+ debug_info->ss + fh->issBase + sh.iss);
+ add_pending (fh, esh, *tpp);
+ break;
+
default:
complain (&illegal_forward_bt_complaint, tir.bt, sym_name);
*tpp = init_type (type_code, 0, 0, (char *) NULL,
*tpp = parse_type (xref_fd,
debug_info->external_aux + fh->iauxBase,
sh.index,
- (int *)NULL,
+ (int *) NULL,
fh->fBigendian,
debug_info->ss + fh->issBase + sh.iss);
}
keeping the symtab sorted */
static struct symbol *
-mylookup_symbol (name, block, namespace, class)
- char *name;
- register struct block *block;
- enum namespace namespace;
- enum address_class class;
+mylookup_symbol (char *name, register struct block *block,
+ namespace_enum namespace, enum address_class class)
{
register int bot, top, inc;
register struct symbol *sym;
that's the only time we know how big the block is. FIXME. */
static void
-add_symbol (s, b)
- struct symbol *s;
- struct block *b;
+add_symbol (struct symbol *s, struct block *b)
{
int nsyms = BLOCK_NSYMS (b)++;
struct block *origb;
{
complain (&block_overflow_complaint, SYMBOL_NAME (s));
/* In this case shrink_block is actually grow_block, since
- BLOCK_NSYMS(b) is larger than its current size. */
+ BLOCK_NSYMS(b) is larger than its current size. */
origb = b;
b = shrink_block (top_stack->cur_block, top_stack->cur_st);
/* Now run through the stack replacing pointers to the
- original block. shrink_block has already done this
- for the blockvector and BLOCK_FUNCTION. */
+ original block. shrink_block has already done this
+ for the blockvector and BLOCK_FUNCTION. */
for (stackp = top_stack; stackp; stackp = stackp->next)
{
if (stackp->cur_block == origb)
/* Add a new block B to a symtab S */
static void
-add_block (b, s)
- struct block *b;
- struct symtab *s;
+add_block (struct block *b, struct symtab *s)
{
struct blockvector *bv = BLOCKVECTOR (s);
This is another reason why -ggdb debugging format is preferable. */
static int
-add_line (lt, lineno, adr, last)
- struct linetable *lt;
- int lineno;
- CORE_ADDR adr;
- int last;
+add_line (struct linetable *lt, int lineno, CORE_ADDR adr, int last)
{
/* DEC c89 sometimes produces zero linenos which confuse gdb.
Change them to something sensible. */
/* Blocks with a smaller low bound should come first */
static int
-compare_blocks (arg1, arg2)
- const PTR arg1;
- const PTR arg2;
+compare_blocks (const PTR arg1, const PTR arg2)
{
register int addr_diff;
struct block **b1 = (struct block **) arg1;
as required by some MI search routines */
static void
-sort_blocks (s)
- struct symtab *s;
+sort_blocks (struct symtab *s)
{
struct blockvector *bv = BLOCKVECTOR (s);
MAXSYMS and linenumbers MAXLINES we'll put in it */
static struct symtab *
-new_symtab (name, maxsyms, maxlines, objfile)
- char *name;
- int maxsyms;
- int maxlines;
- struct objfile *objfile;
+new_symtab (char *name, int maxsyms, int maxlines, struct objfile *objfile)
{
struct symtab *s = allocate_symtab (name, objfile);
BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), GLOBAL_BLOCK);
s->free_code = free_linetable;
-
+ s->debugformat = obsavestring ("ECOFF", 5,
+ &objfile->symbol_obstack);
return (s);
}
/* Allocate a new partial_symtab NAME */
static struct partial_symtab *
-new_psymtab (name, objfile)
- char *name;
- struct objfile *objfile;
+new_psymtab (char *name, struct objfile *objfile)
{
struct partial_symtab *psymtab;
psymtab = allocate_psymtab (name, objfile);
+ psymtab->section_offsets = objfile->section_offsets;
/* Keep a backpointer to the file's symbols */
proper size to allocate. */
static struct linetable *
-new_linetable (size)
- int size;
+new_linetable (int size)
{
struct linetable *l;
calculating the proper size to allocate. */
static struct linetable *
-shrink_linetable (lt)
- struct linetable *lt;
+shrink_linetable (struct linetable *lt)
{
return (struct linetable *) xrealloc ((PTR) lt,
/* Allocate and zero a new blockvector of NBLOCKS blocks. */
static struct blockvector *
-new_bvect (nblocks)
- int nblocks;
+new_bvect (int nblocks)
{
struct blockvector *bv;
int size;
/* Allocate and zero a new block of MAXSYMS symbols */
static struct block *
-new_block (maxsyms)
- int maxsyms;
+new_block (int maxsyms)
{
int size = sizeof (struct block) + (maxsyms - 1) * sizeof (struct symbol *);
Shrink_block can also be used by add_symbol to grow a block. */
static struct block *
-shrink_block (b, s)
- struct block *b;
- struct symtab *s;
+shrink_block (struct block *b, struct symtab *s)
{
struct block *new;
struct blockvector *bv = BLOCKVECTOR (s);
* sizeof (struct symbol *))));
/* Should chase pointers to old one. Fortunately, that`s just
- the block`s function and inferior blocks */
+ the block`s function and inferior blocks */
if (BLOCK_FUNCTION (new) && SYMBOL_BLOCK_VALUE (BLOCK_FUNCTION (new)) == b)
SYMBOL_BLOCK_VALUE (BLOCK_FUNCTION (new)) = new;
for (i = 0; i < BLOCKVECTOR_NBLOCKS (bv); i++)
/* Create a new symbol with printname NAME */
static struct symbol *
-new_symbol (name)
- char *name;
+new_symbol (char *name)
{
struct symbol *s = ((struct symbol *)
obstack_alloc (¤t_objfile->symbol_obstack,
sizeof (struct symbol)));
memset ((PTR) s, 0, sizeof (*s));
- SYMBOL_NAME (s) = name;
+ SYMBOL_NAME (s) = obsavestring (name, strlen (name),
+ ¤t_objfile->symbol_obstack);
SYMBOL_LANGUAGE (s) = psymtab_language;
SYMBOL_INIT_DEMANGLED_NAME (s, ¤t_objfile->symbol_obstack);
return s;
/* Create a new type with printname NAME */
static struct type *
-new_type (name)
- char *name;
+new_type (char *name)
{
struct type *t;
it as normal. */
void
-elfmdebug_build_psymtabs (objfile, swap, sec, section_offsets)
- struct objfile *objfile;
- const struct ecoff_debug_swap *swap;
- asection *sec;
- struct section_offsets *section_offsets;
+elfmdebug_build_psymtabs (struct objfile *objfile,
+ const struct ecoff_debug_swap *swap, asection *sec)
{
bfd *abfd = objfile->obfd;
- char *buf;
struct ecoff_debug_info *info;
- buf = alloca (swap->external_hdr_size);
- if (bfd_get_section_contents (abfd, sec, buf, (file_ptr) 0,
- swap->external_hdr_size) == false)
- perror_with_name (bfd_get_filename (abfd));
-
info = ((struct ecoff_debug_info *)
obstack_alloc (&objfile->psymbol_obstack,
sizeof (struct ecoff_debug_info)));
- (*swap->swap_hdr_in) (abfd, buf, &info->symbolic_header);
-
- /* The offsets in symbolic_header are file offsets, not section
- offsets. Strangely, on Irix 5 the information is not entirely
- within the .mdebug section. There are parts of an executable
- file which are not within any ELF section at all. This means
- that we must read the information using bfd_read. */
-
-#define READ(ptr, count, off, size, type) \
- do \
- { \
- if (info->symbolic_header.count == 0) \
- info->ptr = (type) NULL; \
- else \
- { \
- info->ptr = ((type) \
- obstack_alloc (&objfile->psymbol_obstack, \
- (info->symbolic_header.count \
- * size))); \
- if (bfd_seek (abfd, info->symbolic_header.off, SEEK_SET) < 0 \
- || (bfd_read ((PTR) info->ptr, size, \
- info->symbolic_header.count, abfd) \
- != info->symbolic_header.count * size)) \
- perror_with_name (bfd_get_filename (abfd)); \
- } \
- } \
- while (0)
-
- READ (line, cbLine, cbLineOffset, sizeof (unsigned char), unsigned char *);
- READ (external_dnr, idnMax, cbDnOffset, swap->external_dnr_size, PTR);
- READ (external_pdr, ipdMax, cbPdOffset, swap->external_pdr_size, PTR);
- READ (external_sym, isymMax, cbSymOffset, swap->external_sym_size, PTR);
- READ (external_opt, ioptMax, cbOptOffset, swap->external_opt_size, PTR);
- READ (external_aux, iauxMax, cbAuxOffset, sizeof (union aux_ext),
- union aux_ext *);
- READ (ss, issMax, cbSsOffset, sizeof (char), char *);
- READ (ssext, issExtMax, cbSsExtOffset, sizeof (char), char *);
- READ (external_fdr, ifdMax, cbFdOffset, swap->external_fdr_size, PTR);
- READ (external_rfd, crfd, cbRfdOffset, swap->external_rfd_size, PTR);
- READ (external_ext, iextMax, cbExtOffset, swap->external_ext_size, PTR);
-
-#undef READ
-
- info->fdr = NULL;
-
- mdebug_build_psymtabs (objfile, swap, info, section_offsets);
+ if (!(*swap->read_debug_info) (abfd, sec, info))
+ error ("Error reading ECOFF debugging information: %s",
+ bfd_errmsg (bfd_get_error ()));
+
+ mdebug_build_psymtabs (objfile, swap, info);
}
\f
/* FIXME: This function is called only by mips-tdep.c. It needs to be
here because it calls functions defined in this file, but perhaps
- this could be handled in a better way. */
+ this could be handled in a better way. Only compile it in when
+ tm-mips.h is included. */
+
+#ifdef TM_MIPS_H
void
-fixup_sigtramp ()
+fixup_sigtramp (void)
{
struct symbol *s;
struct symtab *st;
SYMBOL_CLASS (s) = LOC_BLOCK;
SYMBOL_TYPE (s) = init_type (TYPE_CODE_FUNC, 4, 0, (char *) NULL,
st->objfile);
- TYPE_TARGET_TYPE (SYMBOL_TYPE (s)) = builtin_type_void;
+ TYPE_TARGET_TYPE (SYMBOL_TYPE (s)) = mdebug_type_void;
/* Need a block to allocate MIPS_EFI_SYMBOL_NAME in */
b = new_block (1);
/* Make a MIPS_EFI_SYMBOL_NAME entry for it */
{
struct mips_extra_func_info *e =
- ((struct mips_extra_func_info *)
- xzalloc (sizeof (struct mips_extra_func_info)));
+ ((struct mips_extra_func_info *)
+ xzalloc (sizeof (struct mips_extra_func_info)));
e->numargs = 0; /* the kernel thinks otherwise */
- /* align_longword(sigcontext + SIGFRAME) */
- e->pdr.frameoffset = 0x150;
+ e->pdr.frameoffset = 32;
e->pdr.framereg = SP_REGNUM;
- /* read_next_frame_reg provides the true pc at the time of signal */
+ /* Note that setting pcreg is no longer strictly necessary as
+ mips_frame_saved_pc is now aware of signal handler frames. */
e->pdr.pcreg = PC_REGNUM;
e->pdr.regmask = -2;
- e->pdr.regoffset = -(41 * sizeof (int));
+ /* Offset to saved r31, in the sigtramp case the saved registers
+ are above the frame in the sigcontext.
+ We have 4 alignment bytes, 12 bytes for onstack, mask and pc,
+ 32 * 4 bytes for the general registers, 12 bytes for mdhi, mdlo, ownedfp
+ and 32 * 4 bytes for the floating point registers. */
+ e->pdr.regoffset = 4 + 12 + 31 * 4;
e->pdr.fregmask = -1;
- e->pdr.fregoffset = -(7 * sizeof (int));
+ /* Offset to saved f30 (first saved *double* register). */
+ e->pdr.fregoffset = 4 + 12 + 32 * 4 + 12 + 30 * 4;
e->pdr.isym = (long) s;
e->pdr.adr = sigtramp_address;
SYMBOL_VALUE (s) = (long) e;
SYMBOL_NAMESPACE (s) = LABEL_NAMESPACE;
SYMBOL_CLASS (s) = LOC_CONST;
- SYMBOL_TYPE (s) = builtin_type_void;
+ SYMBOL_TYPE (s) = mdebug_type_void;
current_objfile = NULL;
}
BLOCK_SYM (b, BLOCK_NSYMS (b)++) = s;
}
+#endif /* TM_MIPS_H */
+
void
-_initialize_mdebugread ()
+_initialize_mdebugread (void)
{
- /* Missing basic types */
+ mdebug_type_void =
+ init_type (TYPE_CODE_VOID, 1,
+ 0,
+ "void", (struct objfile *) NULL);
+ mdebug_type_char =
+ init_type (TYPE_CODE_INT, 1,
+ 0,
+ "char", (struct objfile *) NULL);
+ mdebug_type_unsigned_char =
+ init_type (TYPE_CODE_INT, 1,
+ TYPE_FLAG_UNSIGNED,
+ "unsigned char", (struct objfile *) NULL);
+ mdebug_type_short =
+ init_type (TYPE_CODE_INT, 2,
+ 0,
+ "short", (struct objfile *) NULL);
+ mdebug_type_unsigned_short =
+ init_type (TYPE_CODE_INT, 2,
+ TYPE_FLAG_UNSIGNED,
+ "unsigned short", (struct objfile *) NULL);
+ mdebug_type_int_32 =
+ init_type (TYPE_CODE_INT, 4,
+ 0,
+ "int", (struct objfile *) NULL);
+ mdebug_type_unsigned_int_32 =
+ init_type (TYPE_CODE_INT, 4,
+ TYPE_FLAG_UNSIGNED,
+ "unsigned int", (struct objfile *) NULL);
+ mdebug_type_int_64 =
+ init_type (TYPE_CODE_INT, 8,
+ 0,
+ "int", (struct objfile *) NULL);
+ mdebug_type_unsigned_int_64 =
+ init_type (TYPE_CODE_INT, 8,
+ TYPE_FLAG_UNSIGNED,
+ "unsigned int", (struct objfile *) NULL);
+ mdebug_type_long_32 =
+ init_type (TYPE_CODE_INT, 4,
+ 0,
+ "long", (struct objfile *) NULL);
+ mdebug_type_unsigned_long_32 =
+ init_type (TYPE_CODE_INT, 4,
+ TYPE_FLAG_UNSIGNED,
+ "unsigned long", (struct objfile *) NULL);
+ mdebug_type_long_64 =
+ init_type (TYPE_CODE_INT, 8,
+ 0,
+ "long", (struct objfile *) NULL);
+ mdebug_type_unsigned_long_64 =
+ init_type (TYPE_CODE_INT, 8,
+ TYPE_FLAG_UNSIGNED,
+ "unsigned long", (struct objfile *) NULL);
+ mdebug_type_long_long_64 =
+ init_type (TYPE_CODE_INT, 8,
+ 0,
+ "long long", (struct objfile *) NULL);
+ mdebug_type_unsigned_long_long_64 =
+ init_type (TYPE_CODE_INT, 8,
+ TYPE_FLAG_UNSIGNED,
+ "unsigned long long", (struct objfile *) NULL);
+ mdebug_type_adr_32 =
+ init_type (TYPE_CODE_PTR, 4,
+ TYPE_FLAG_UNSIGNED,
+ "adr_32", (struct objfile *) NULL);
+ TYPE_TARGET_TYPE (mdebug_type_adr_32) = mdebug_type_void;
+ mdebug_type_adr_64 =
+ init_type (TYPE_CODE_PTR, 8,
+ TYPE_FLAG_UNSIGNED,
+ "adr_64", (struct objfile *) NULL);
+ TYPE_TARGET_TYPE (mdebug_type_adr_64) = mdebug_type_void;
+ mdebug_type_float =
+ init_type (TYPE_CODE_FLT, TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+ 0,
+ "float", (struct objfile *) NULL);
+ mdebug_type_double =
+ init_type (TYPE_CODE_FLT, TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+ 0,
+ "double", (struct objfile *) NULL);
+ mdebug_type_complex =
+ init_type (TYPE_CODE_COMPLEX, 2 * TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+ 0,
+ "complex", (struct objfile *) NULL);
+ TYPE_TARGET_TYPE (mdebug_type_complex) = mdebug_type_float;
+ mdebug_type_double_complex =
+ init_type (TYPE_CODE_COMPLEX, 2 * TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+ 0,
+ "double complex", (struct objfile *) NULL);
+ TYPE_TARGET_TYPE (mdebug_type_double_complex) = mdebug_type_double;
/* Is a "string" the way btString means it the same as TYPE_CODE_STRING?
FIXME. */
0, "string",
(struct objfile *) NULL);
- mdebug_type_complex =
- init_type (TYPE_CODE_ERROR,
- TARGET_COMPLEX_BIT / TARGET_CHAR_BIT,
- 0, "complex",
- (struct objfile *) NULL);
- mdebug_type_double_complex =
- init_type (TYPE_CODE_ERROR,
- TARGET_DOUBLE_COMPLEX_BIT / TARGET_CHAR_BIT,
- 0, "double complex",
- (struct objfile *) NULL);
-
/* We use TYPE_CODE_INT to print these as integers. Does this do any
good? Would we be better off with TYPE_CODE_ERROR? Should
TYPE_CODE_ERROR print things in hex if it knows the size? */
TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
0, "floating decimal",
(struct objfile *) NULL);
+
+ nodebug_func_symbol_type = init_type (TYPE_CODE_FUNC, 1, 0,
+ "<function, no debug info>", NULL);
+ TYPE_TARGET_TYPE (nodebug_func_symbol_type) = mdebug_type_int;
+ nodebug_var_symbol_type =
+ init_type (TYPE_CODE_INT, TARGET_INT_BIT / HOST_CHAR_BIT, 0,
+ "<variable, no debug info>", NULL);
}