/* MI Command Set - disassemble commands.
- Copyright (C) 2000, Free Software Foundation, Inc.
+ Copyright (C) 2000-2016 Free Software Foundation, Inc.
Contributed by Cygnus Solutions (a Red Hat company).
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
+#include "arch-utils.h"
#include "target.h"
#include "value.h"
#include "mi-cmds.h"
#include "mi-getopt.h"
#include "ui-out.h"
+#include "disasm.h"
-static int gdb_dis_asm_read_memory (bfd_vma memaddr, bfd_byte * myaddr, unsigned int len,
- disassemble_info * info);
-static int compare_lines (const PTR mle1p, const PTR mle2p);
-
-/* Disassemble functions. FIXME: these do not really belong here. We
- should get rid of all the duplicate code in gdb that does the same
- thing: disassemble_command() and the gdbtk variation. */
-
-/* This Structure is used in mi_cmd_disassemble.
- We need a different sort of line table from the normal one cuz we can't
- depend upon implicit line-end pc's for lines to do the
- reordering in this function. */
-
-struct dis_line_entry
- {
- int line;
- CORE_ADDR start_pc;
- CORE_ADDR end_pc;
- };
-
-/* This variable determines where memory used for disassembly is read from. */
-int gdb_disassemble_from_exec = -1;
-
-/* This is the memory_read_func for gdb_disassemble when we are
- disassembling from the exec file. */
-static int
-gdb_dis_asm_read_memory (bfd_vma memaddr, bfd_byte * myaddr,
- unsigned int len, disassemble_info * info)
-{
- extern struct target_ops exec_ops;
- int res;
-
- errno = 0;
- res = xfer_memory (memaddr, myaddr, len, 0, &exec_ops);
-
- if (res == len)
- return 0;
- else if (errno == 0)
- return EIO;
- else
- return errno;
-}
-
-static int
-compare_lines (const PTR mle1p, const PTR mle2p)
-{
- struct dis_line_entry *mle1, *mle2;
- int val;
-
- mle1 = (struct dis_line_entry *) mle1p;
- mle2 = (struct dis_line_entry *) mle2p;
-
- val = mle1->line - mle2->line;
-
- if (val != 0)
- return val;
-
- return mle1->start_pc - mle2->start_pc;
-}
-
-/* The arguments to be passed on the command line and parsed here are:
-
+/* The arguments to be passed on the command line and parsed here are
either:
START-ADDRESS: address to start the disassembly at.
FILENAME: The name of the file where we want disassemble from.
LINE: The line around which we want to disassemble. It will
disassemble the function that contins that line.
- HOW_MANY: Number of disassembly lines to display. In mixed mode, it
+ HOW_MANY: Number of disassembly lines to display. With source, it
is the number of disassembly lines only, not counting the source
lines.
always required:
- MODE: 0 or 1 for disassembly only, or mixed source and disassembly,
- respectively. */
+ MODE: 0 -- disassembly.
+ 1 -- disassembly and source (with deprecated source-centric view).
+ 2 -- disassembly and opcodes.
+ 3 -- disassembly, source-centric and opcodes.
+ 4 -- disassembly, and source (with pc-centric view).
+ 5 -- disassembly, source (pc-centric) and opcodes. */
-enum mi_cmd_result
+void
mi_cmd_disassemble (char *command, char **argv, int argc)
{
- CORE_ADDR pc;
+ struct gdbarch *gdbarch = get_current_arch ();
+ struct ui_out *uiout = current_uiout;
CORE_ADDR start;
- CORE_ADDR low = 0;
- CORE_ADDR high = 0;
-
- int how_many = -1;
- int mixed_source_and_assembly;
- int num_displayed;
- int line_num;
-
- char *file_string;
- static disassemble_info di;
- static int di_initialized;
+ int mode, disasm_flags;
struct symtab *s;
- /* To collect the instruction outputted from opcodes. */
- static struct ui_stream *stb = NULL;
-
- /* parts of the symbolic representation of the address */
- int line;
- int offset;
- int unmapped;
- char *filename = NULL;
- char *name = NULL;
-
- /* Which options have we processed? */
+ /* Which options have we processed ... */
int file_seen = 0;
int line_seen = 0;
int num_seen = 0;
int start_seen = 0;
int end_seen = 0;
- /* Options processing stuff. */
- int optind = 0;
- char *optarg;
+ /* ... and their corresponding value. */
+ char *file_string = NULL;
+ int line_num = -1;
+ int how_many = -1;
+ CORE_ADDR low = 0;
+ CORE_ADDR high = 0;
+ struct cleanup *cleanups = make_cleanup (null_cleanup, NULL);
+
+ /* Options processing stuff. */
+ int oind = 0;
+ char *oarg;
enum opt
- {
- FILE_OPT, LINE_OPT, NUM_OPT, START_OPT, END_OPT
- };
- static struct mi_opt opts[] =
{
- {"f", FILE_OPT, 1},
- {"l", LINE_OPT, 1},
- {"n", NUM_OPT, 1},
- {"s", START_OPT, 1},
- {"e", END_OPT, 1},
- 0
+ FILE_OPT, LINE_OPT, NUM_OPT, START_OPT, END_OPT
};
+ static const struct mi_opt opts[] =
+ {
+ {"f", FILE_OPT, 1},
+ {"l", LINE_OPT, 1},
+ {"n", NUM_OPT, 1},
+ {"s", START_OPT, 1},
+ {"e", END_OPT, 1},
+ { 0, 0, 0 }
+ };
/* Get the options with their arguments. Keep track of what we
- encountered. */
+ encountered. */
while (1)
{
- int opt = mi_getopt ("mi_cmd_disassemble", argc, argv, opts,
- &optind, &optarg);
+ int opt = mi_getopt ("-data-disassemble", argc, argv, opts,
+ &oind, &oarg);
if (opt < 0)
break;
switch ((enum opt) opt)
{
case FILE_OPT:
- file_string = xstrdup (optarg);
+ file_string = xstrdup (oarg);
file_seen = 1;
+ make_cleanup (xfree, file_string);
break;
case LINE_OPT:
- line_num = atoi (optarg);
+ line_num = atoi (oarg);
line_seen = 1;
break;
case NUM_OPT:
- how_many = atoi (optarg);
+ how_many = atoi (oarg);
num_seen = 1;
break;
case START_OPT:
- low = parse_and_eval_address (optarg);
+ low = parse_and_eval_address (oarg);
start_seen = 1;
break;
case END_OPT:
- high = parse_and_eval_address (optarg);
+ high = parse_and_eval_address (oarg);
end_seen = 1;
break;
}
}
- argv += optind;
- argc -= optind;
+ argv += oind;
+ argc -= oind;
/* Allow only filename + linenum (with how_many which is not
- required) OR start_addr + and_addr */
+ required) OR start_addr + end_addr. */
if (!((line_seen && file_seen && num_seen && !start_seen && !end_seen)
|| (line_seen && file_seen && !num_seen && !start_seen && !end_seen)
- || (!line_seen && !file_seen && !num_seen && start_seen && end_seen)))
- error ("mi_cmd_disassemble: Usage: ( [-f filename -l linenum [-n howmany]] | [-s startaddr -e endaddr]) [--] mixed_mode.");
+ || (!line_seen && !file_seen && !num_seen && start_seen && end_seen)))
+ error (_("-data-disassemble: Usage: ( [-f filename -l linenum [-n "
+ "howmany]] | [-s startaddr -e endaddr]) [--] mode."));
if (argc != 1)
- error ("mi_cmd_disassemble: Usage: [-f filename -l linenum [-n howmany]] [-s startaddr -e endaddr] [--] mixed_mode.");
+ error (_("-data-disassemble: Usage: [-f filename -l linenum "
+ "[-n howmany]] [-s startaddr -e endaddr] [--] mode."));
+
+ mode = atoi (argv[0]);
+ if (mode < 0 || mode > 5)
+ error (_("-data-disassemble: Mode argument must be in the range 0-5."));
- mixed_source_and_assembly = atoi (argv[0]);
- if ((mixed_source_and_assembly != 0) && (mixed_source_and_assembly != 1))
- error ("mi_cmd_disassemble: Mixed_mode argument must be 0 or 1.");
+ /* Convert the mode into a set of disassembly flags. */
+
+ disasm_flags = 0; /* Initialize here for -Wall. */
+ switch (mode)
+ {
+ case 0:
+ break;
+ case 1:
+ disasm_flags |= DISASSEMBLY_SOURCE_DEPRECATED;
+ break;
+ case 2:
+ disasm_flags |= DISASSEMBLY_RAW_INSN;
+ break;
+ case 3:
+ disasm_flags |= DISASSEMBLY_SOURCE_DEPRECATED | DISASSEMBLY_RAW_INSN;
+ break;
+ case 4:
+ disasm_flags |= DISASSEMBLY_SOURCE;
+ break;
+ case 5:
+ disasm_flags |= DISASSEMBLY_SOURCE | DISASSEMBLY_RAW_INSN;
+ break;
+ default:
+ gdb_assert_not_reached ("bad disassembly mode");
+ }
/* We must get the function beginning and end where line_num is
- contained. */
+ contained. */
if (line_seen && file_seen)
{
s = lookup_symtab (file_string);
if (s == NULL)
- error ("mi_cmd_disassemble: Invalid filename.");
+ error (_("-data-disassemble: Invalid filename."));
if (!find_line_pc (s, line_num, &start))
- error ("mi_cmd_disassemble: Invalid line number");
+ error (_("-data-disassemble: Invalid line number"));
if (find_pc_partial_function (start, NULL, &low, &high) == 0)
- error ("mi_cmd_disassemble: No function contains specified address");
+ error (_("-data-disassemble: "
+ "No function contains specified address"));
}
- if (!di_initialized)
- {
- /* We don't add a cleanup for this, because the allocation of
- the stream is done once only for each gdb run, and we need to
- keep it around until the end. Hopefully there won't be any
- errors in the init code below, that make this function bail
- out. */
- stb = ui_out_stream_new (uiout);
- INIT_DISASSEMBLE_INFO_NO_ARCH (di, stb->stream,
- (fprintf_ftype) fprintf_unfiltered);
- di.flavour = bfd_target_unknown_flavour;
- di.memory_error_func = dis_asm_memory_error;
- di.print_address_func = dis_asm_print_address;
- di_initialized = 1;
- }
-
- di.mach = TARGET_PRINT_INSN_INFO->mach;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- di.endian = BFD_ENDIAN_BIG;
- else
- di.endian = BFD_ENDIAN_LITTLE;
-
- /* If gdb_disassemble_from_exec == -1, then we use the following heuristic to
- determine whether or not to do disassembly from target memory or from the
- exec file:
-
- If we're debugging a local process, read target memory, instead of the
- exec file. This makes disassembly of functions in shared libs work
- correctly. Also, read target memory if we are debugging native threads.
-
- Else, we're debugging a remote process, and should disassemble from the
- exec file for speed. However, this is no good if the target modifies its
- code (for relocation, or whatever).
- */
-
- if (gdb_disassemble_from_exec == -1)
- {
- if (strcmp (target_shortname, "child") == 0
- || strcmp (target_shortname, "procfs") == 0
- || strcmp (target_shortname, "vxprocess") == 0
- || strstr (target_shortname, "-threads") != NULL)
- gdb_disassemble_from_exec = 0; /* It's a child process, read inferior mem */
- else
- gdb_disassemble_from_exec = 1; /* It's remote, read the exec file */
- }
-
- if (gdb_disassemble_from_exec)
- di.read_memory_func = gdb_dis_asm_read_memory;
- else
- di.read_memory_func = dis_asm_read_memory;
-
- /* If just doing straight assembly, all we need to do is disassemble
- everything between low and high. If doing mixed source/assembly,
- we've got a totally different path to follow. */
-
- if (mixed_source_and_assembly)
- {
- /* Come here for mixed source/assembly */
- /* The idea here is to present a source-O-centric view of a
- function to the user. This means that things are presented
- in source order, with (possibly) out of order assembly
- immediately following. */
- struct symtab *symtab;
- struct linetable_entry *le;
- int nlines;
- int newlines;
- struct dis_line_entry *mle;
- struct symtab_and_line sal;
- int i;
- int out_of_order;
- int next_line;
-
- /* Assume symtab is valid for whole PC range */
- symtab = find_pc_symtab (low);
-
- if (!symtab || !symtab->linetable)
- goto assembly_only;
-
- /* First, convert the linetable to a bunch of my_line_entry's. */
-
- le = symtab->linetable->item;
- nlines = symtab->linetable->nitems;
-
- if (nlines <= 0)
- goto assembly_only;
-
- mle = (struct dis_line_entry *) alloca (nlines * sizeof (struct dis_line_entry));
-
- out_of_order = 0;
-
- /* Copy linetable entries for this function into our data
- structure, creating end_pc's and setting out_of_order as
- appropriate. */
-
- /* First, skip all the preceding functions. */
-
- for (i = 0; i < nlines - 1 && le[i].pc < low; i++);
-
- /* Now, copy all entries before the end of this function. */
-
- newlines = 0;
- for (; i < nlines - 1 && le[i].pc < high; i++)
- {
- if (le[i].line == le[i + 1].line
- && le[i].pc == le[i + 1].pc)
- continue; /* Ignore duplicates */
-
- mle[newlines].line = le[i].line;
- if (le[i].line > le[i + 1].line)
- out_of_order = 1;
- mle[newlines].start_pc = le[i].pc;
- mle[newlines].end_pc = le[i + 1].pc;
- newlines++;
- }
-
- /* If we're on the last line, and it's part of the function,
- then we need to get the end pc in a special way. */
-
- if (i == nlines - 1
- && le[i].pc < high)
- {
- mle[newlines].line = le[i].line;
- mle[newlines].start_pc = le[i].pc;
- sal = find_pc_line (le[i].pc, 0);
- mle[newlines].end_pc = sal.end;
- newlines++;
- }
-
- /* Now, sort mle by line #s (and, then by addresses within
- lines). */
-
- if (out_of_order)
- qsort (mle, newlines, sizeof (struct dis_line_entry), compare_lines);
-
- /* Now, for each line entry, emit the specified lines (unless
- they have been emitted before), followed by the assembly code
- for that line. */
-
- next_line = 0; /* Force out first line */
- ui_out_list_begin (uiout, "asm_insns");
- num_displayed = 0;
- for (i = 0; i < newlines; i++)
- {
- int close_list = 1;
- /* Print out everything from next_line to the current line. */
- if (mle[i].line >= next_line)
- {
- if (next_line != 0)
- {
- /* Just one line to print. */
- if (next_line == mle[i].line)
- {
- ui_out_list_begin (uiout, "src_and_asm_line");
- print_source_lines (symtab, next_line, mle[i].line + 1, 0);
- }
- else
- {
- /* Several source lines w/o asm instructions associated. */
- for (; next_line < mle[i].line; next_line++)
- {
- ui_out_list_begin (uiout, "src_and_asm_line");
- print_source_lines (symtab, next_line, mle[i].line + 1, 0);
- ui_out_list_begin (uiout, "line_asm_insn");
- ui_out_list_end (uiout);
- ui_out_list_end (uiout);
- }
- /* Print the last line and leave list open for
- asm instructions to be added. */
- ui_out_list_begin (uiout, "src_and_asm_line");
- print_source_lines (symtab, next_line, mle[i].line + 1, 0);
- }
- }
- else
- {
- ui_out_list_begin (uiout, "src_and_asm_line");
- print_source_lines (symtab, mle[i].line, mle[i].line + 1, 0);
- }
-
- next_line = mle[i].line + 1;
- ui_out_list_begin (uiout, "line_asm_insn");
- if (i + 1 < newlines && mle[i + 1].line <= mle[i].line)
- close_list = 0;
- }
- for (pc = mle[i].start_pc; pc < mle[i].end_pc;)
- {
- QUIT;
- if (how_many >= 0)
- {
- if (num_displayed >= how_many)
- break;
- else
- num_displayed++;
- }
- ui_out_list_begin (uiout, NULL);
- ui_out_field_core_addr (uiout, "address", pc);
-
- if (!build_address_symbolic (pc, 0, &name, &offset, &filename, &line, &unmapped))
- {
- /* We don't care now about line, filename and
- unmapped, but we might in the future. */
- ui_out_field_string (uiout, "func-name", name);
- ui_out_field_int (uiout, "offset", offset);
- }
- if (filename != NULL)
- free (filename);
- if (name != NULL)
- free (name);
-
- ui_file_rewind (stb->stream);
- pc += (*tm_print_insn) (pc, &di);
- ui_out_field_stream (uiout, "inst", stb);
- ui_file_rewind (stb->stream);
- ui_out_list_end (uiout);
- }
- if (close_list)
- {
- ui_out_list_end (uiout);
- ui_out_list_end (uiout);
- close_list = 0;
- }
- if (how_many >= 0)
- if (num_displayed >= how_many)
- break;
- }
- ui_out_list_end (uiout);
- }
- else
- {
- assembly_only:
- ui_out_list_begin (uiout, "asm_insns");
- num_displayed = 0;
- for (pc = low; pc < high;)
- {
- QUIT;
- if (how_many >= 0)
- {
- if (num_displayed >= how_many)
- break;
- else
- num_displayed++;
- }
- ui_out_list_begin (uiout, NULL);
- ui_out_field_core_addr (uiout, "address", pc);
-
- if (!build_address_symbolic (pc, 0, &name, &offset, &filename, &line, &unmapped))
- {
- /* We don't care now about line, filename and
- unmapped. But we might in the future. */
- ui_out_field_string (uiout, "func-name", name);
- ui_out_field_int (uiout, "offset", offset);
- }
- if (filename != NULL)
- free (filename);
- if (name != NULL)
- free (name);
-
- ui_file_rewind (stb->stream);
- pc += (*tm_print_insn) (pc, &di);
- ui_out_field_stream (uiout, "inst", stb);
- ui_file_rewind (stb->stream);
- ui_out_list_end (uiout);
- }
- ui_out_list_end (uiout);
- }
- gdb_flush (gdb_stdout);
+ gdb_disassembly (gdbarch, uiout,
+ file_string,
+ disasm_flags,
+ how_many, low, high);
- return MI_CMD_DONE;
+ do_cleanups (cleanups);
}