/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
+ Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
#include "symfile.h"
#include "objfiles.h"
#include "gdbtypes.h"
+#include "target.h"
#include "opcode/mips.h"
+/* start-sanitize-carp start-sanitize-vr4xxx */
+#include "elf/mips.h"
+#include "elf-bfd.h"
-#define VM_MIN_ADDRESS (unsigned)0x400000
+/* end-sanitize-carp end-sanitize-vr4xxx */
+
+/* Some MIPS boards don't support floating point, so we permit the
+ user to turn it off. */
+
+enum mips_fpu_type
+{
+ MIPS_FPU_DOUBLE, /* Full double precision floating point. */
+ MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
+ MIPS_FPU_NONE /* No floating point. */
+};
+
+#ifndef MIPS_DEFAULT_FPU_TYPE
+#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_DOUBLE
+#endif
+static int mips_fpu_type_auto = 1;
+static enum mips_fpu_type mips_fpu_type = MIPS_DEFAULT_FPU_TYPE;
+#define MIPS_FPU_TYPE mips_fpu_type
+
+/* start-sanitize-carp start-sanitize-vr4xxx */
+
+/* MIPS specific per-architecture information */
+struct gdbarch_tdep
+{
+ int elf_abi;
+ /* mips options */
+ int mips_eabi;
+ enum mips_fpu_type mips_fpu_type;
+ int mips_last_arg_regnum;
+ int mips_last_fp_arg_regnum;
+};
+
+#if GDB_MULTI_ARCH
+#undef MIPS_EABI
+#define MIPS_EABI (gdbarch_tdep (current_gdbarch)->mips_eabi)
+#endif
+
+#if GDB_MULTI_ARCH
+#undef MIPS_LAST_FP_ARG_REGNUM
+#define MIPS_LAST_FP_ARG_REGNUM (gdbarch_tdep (current_gdbarch)->mips_last_fp_arg_regnum)
+#endif
+
+#if GDB_MULTI_ARCH
+#undef MIPS_LAST_ARG_REGNUM
+#define MIPS_LAST_ARG_REGNUM (gdbarch_tdep (current_gdbarch)->mips_last_arg_regnum)
+#endif
+
+#if GDB_MULTI_ARCH
+#undef MIPS_FPU_TYPE
+#define MIPS_FPU_TYPE (gdbarch_tdep (current_gdbarch)->mips_fpu_type)
+#endif
+
+/* end-sanitize-carp end-sanitize-vr4xxx */
+
+#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
+
+/* Do not use "TARGET_IS_MIPS64" to test the size of floating point registers */
+#define FP_REGISTER_DOUBLE (REGISTER_VIRTUAL_SIZE(FP0_REGNUM) == 8)
-/* FIXME: Put this declaration in frame.h. */
-extern struct obstack frame_cache_obstack;
-\f
#if 0
static int mips_in_lenient_prologue PARAMS ((CORE_ADDR, CORE_ADDR));
#endif
+int gdb_print_insn_mips PARAMS ((bfd_vma, disassemble_info *));
+
static void mips_print_register PARAMS ((int, int));
static mips_extra_func_info_t
static CORE_ADDR heuristic_proc_start PARAMS ((CORE_ADDR));
-static int read_next_frame_reg PARAMS ((struct frame_info *, int));
-
-static void mips_set_fpu_command PARAMS ((char *, int,
- struct cmd_list_element *));
-
-static void mips_show_fpu_command PARAMS ((char *, int,
- struct cmd_list_element *));
+static CORE_ADDR read_next_frame_reg PARAMS ((struct frame_info *, int));
void mips_set_processor_type_command PARAMS ((char *, int));
char *tmp_mips_processor_type;
-/* Some MIPS boards don't support floating point, so we permit the
- user to turn it off. */
-
-enum mips_fpu_type mips_fpu;
-
-static char *mips_fpu_string;
-
/* A set of original names, to be used when restoring back to generic
registers from a specific set. */
{ NULL, NULL }
};
+/* Table to translate MIPS16 register field to actual register number. */
+static int mips16_to_32_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 };
+
/* Heuristic_proc_start may hunt through the text section for a long
time across a 2400 baud serial line. Allows the user to limit this
search. */
static unsigned int heuristic_fence_post = 0;
#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
-#define PROC_HIGH_ADDR(proc) ((proc)->pdr.iline) /* upper address bound */
+#define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */
#define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset)
#define PROC_FRAME_REG(proc) ((proc)->pdr.framereg)
+#define PROC_FRAME_ADJUST(proc) ((proc)->frame_adjust)
#define PROC_REG_MASK(proc) ((proc)->pdr.regmask)
#define PROC_FREG_MASK(proc) ((proc)->pdr.fregmask)
#define PROC_REG_OFFSET(proc) ((proc)->pdr.regoffset)
struct linked_proc_info *next;
} *linked_proc_desc_table = NULL;
-\f
+
+/* Should the upper word of 64-bit addresses be zeroed? */
+static int mask_address_p = 1;
+
+/* Should call_function allocate stack space for a struct return? */
+int
+mips_use_struct_convention (gcc_p, type)
+ int gcc_p;
+ struct type *type;
+{
+ if (MIPS_EABI)
+ return (TYPE_LENGTH (type) > 2 * MIPS_REGSIZE);
+ else
+ return 1; /* Structures are returned by ref in extra arg0 */
+}
+
+/* Tell if the program counter value in MEMADDR is in a MIPS16 function. */
+
+static int
+pc_is_mips16 (bfd_vma memaddr)
+{
+ struct minimal_symbol *sym;
+
+ /* If bit 0 of the address is set, assume this is a MIPS16 address. */
+ if (IS_MIPS16_ADDR (memaddr))
+ return 1;
+
+ /* A flag indicating that this is a MIPS16 function is stored by elfread.c in
+ the high bit of the info field. Use this to decide if the function is
+ MIPS16 or normal MIPS. */
+ sym = lookup_minimal_symbol_by_pc (memaddr);
+ if (sym)
+ return MSYMBOL_IS_SPECIAL (sym);
+ else
+ return 0;
+}
+
/* This returns the PC of the first inst after the prologue. If we can't
find the prologue, then return 0. */
return 0;
}
+/* Decode a MIPS32 instruction that saves a register in the stack, and
+ set the appropriate bit in the general register mask or float register mask
+ to indicate which register is saved. This is a helper function
+ for mips_find_saved_regs. */
+
+static void
+mips32_decode_reg_save (inst, gen_mask, float_mask)
+ t_inst inst;
+ unsigned long *gen_mask;
+ unsigned long *float_mask;
+{
+ int reg;
+
+ if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */
+ || (inst & 0xffe00000) == 0xafc00000 /* sw reg,n($r30) */
+ /* start-sanitize-r5900 */
+ || (inst & 0xffe00000) == 0x7fa00000 /* sq reg,n($sp) */
+ /* end-sanitize-r5900 */
+ || (inst & 0xffe00000) == 0xffa00000) /* sd reg,n($sp) */
+ {
+ /* It might be possible to use the instruction to
+ find the offset, rather than the code below which
+ is based on things being in a certain order in the
+ frame, but figuring out what the instruction's offset
+ is relative to might be a little tricky. */
+ reg = (inst & 0x001f0000) >> 16;
+ *gen_mask |= (1 << reg);
+ }
+ else if ((inst & 0xffe00000) == 0xe7a00000 /* swc1 freg,n($sp) */
+ || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
+ || (inst & 0xffe00000) == 0xf7a00000)/* sdc1 freg,n($sp) */
+
+ {
+ reg = ((inst & 0x001f0000) >> 16);
+ *float_mask |= (1 << reg);
+ }
+}
+
+/* Decode a MIPS16 instruction that saves a register in the stack, and
+ set the appropriate bit in the general register or float register mask
+ to indicate which register is saved. This is a helper function
+ for mips_find_saved_regs. */
+
+static void
+mips16_decode_reg_save (inst, gen_mask)
+ t_inst inst;
+ unsigned long *gen_mask;
+{
+ if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
+ {
+ int reg = mips16_to_32_reg[(inst & 0x700) >> 8];
+ *gen_mask |= (1 << reg);
+ }
+ else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
+ {
+ int reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ *gen_mask |= (1 << reg);
+ }
+ else if ((inst & 0xff00) == 0x6200 /* sw $ra,n($sp) */
+ || (inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
+ *gen_mask |= (1 << RA_REGNUM);
+}
+
+
+/* Fetch and return instruction from the specified location. If the PC
+ is odd, assume it's a MIPS16 instruction; otherwise MIPS32. */
+
+static t_inst
+mips_fetch_instruction (addr)
+ CORE_ADDR addr;
+{
+ char buf[MIPS_INSTLEN];
+ int instlen;
+ int status;
+
+ if (pc_is_mips16 (addr))
+ {
+ instlen = MIPS16_INSTLEN;
+ addr = UNMAKE_MIPS16_ADDR (addr);
+ }
+ else
+ instlen = MIPS_INSTLEN;
+ status = read_memory_nobpt (addr, buf, instlen);
+ if (status)
+ memory_error (status, addr);
+ return extract_unsigned_integer (buf, instlen);
+}
+
+
+/* These the fields of 32 bit mips instructions */
+#define mips32_op(x) (x >> 25)
+#define itype_op(x) (x >> 25)
+#define itype_rs(x) ((x >> 21)& 0x1f)
+#define itype_rt(x) ((x >> 16) & 0x1f)
+#define itype_immediate(x) ( x & 0xffff)
+
+#define jtype_op(x) (x >> 25)
+#define jtype_target(x) ( x & 0x03fffff)
+
+#define rtype_op(x) (x >>25)
+#define rtype_rs(x) ((x>>21) & 0x1f)
+#define rtype_rt(x) ((x>>16) & 0x1f)
+#define rtype_rd(x) ((x>>11) & 0x1f)
+#define rtype_shamt(x) ((x>>6) & 0x1f)
+#define rtype_funct(x) (x & 0x3f )
+
+static CORE_ADDR
+mips32_relative_offset(unsigned long inst)
+{ long x ;
+ x = itype_immediate(inst) ;
+ if (x & 0x8000) /* sign bit set */
+ {
+ x |= 0xffff0000 ; /* sign extension */
+ }
+ x = x << 2 ;
+ return x ;
+}
+
+/* Determine whate to set a single step breakpoint while considering
+ branch prediction */
+CORE_ADDR
+mips32_next_pc(CORE_ADDR pc)
+{
+ unsigned long inst ;
+ int op ;
+ inst = mips_fetch_instruction(pc) ;
+ if ((inst & 0xe0000000) != 0) /* Not a special, junp or branch instruction */
+ { if ((inst >> 27) == 5) /* BEQL BNEZ BLEZL BGTZE , bits 0101xx */
+ { op = ((inst >> 25) & 0x03) ;
+ switch (op)
+ {
+ case 0 : goto equal_branch ; /* BEQL */
+ case 1 : goto neq_branch ; /* BNEZ */
+ case 2 : goto less_branch ; /* BLEZ */
+ case 3 : goto greater_branch ; /* BGTZ */
+ default : pc += 4 ;
+ }
+ }
+ else pc += 4 ; /* Not a branch, next instruction is easy */
+ }
+ else
+ { /* This gets way messy */
+
+ /* Further subdivide into SPECIAL, REGIMM and other */
+ switch (op = ((inst >> 26) & 0x07)) /* extract bits 28,27,26 */
+ {
+ case 0 : /* SPECIAL */
+ op = rtype_funct(inst) ;
+ switch (op)
+ {
+ case 8 : /* JR */
+ case 9 : /* JALR */
+ pc = read_register(rtype_rs(inst)) ; /* Set PC to that address */
+ break ;
+ default: pc += 4 ;
+ }
+
+ break ; /* end special */
+ case 1 : /* REGIMM */
+ {
+ op = jtype_op(inst) ; /* branch condition */
+ switch (jtype_op(inst))
+ {
+ case 0 : /* BLTZ */
+ case 2 : /* BLTXL */
+ case 16 : /* BLTZALL */
+ case 18 : /* BLTZALL */
+ less_branch:
+ if (read_register(itype_rs(inst)) < 0)
+ pc += mips32_relative_offset(inst) + 4 ;
+ else pc += 8 ; /* after the delay slot */
+ break ;
+ case 1 : /* GEZ */
+ case 3 : /* BGEZL */
+ case 17 : /* BGEZAL */
+ case 19 : /* BGEZALL */
+ greater_equal_branch:
+ if (read_register(itype_rs(inst)) >= 0)
+ pc += mips32_relative_offset(inst) + 4 ;
+ else pc += 8 ; /* after the delay slot */
+ break ;
+ /* All of the other intructions in the REGIMM catagory */
+ default: pc += 4 ;
+ }
+ }
+ break ; /* end REGIMM */
+ case 2 : /* J */
+ case 3 : /* JAL */
+ { unsigned long reg ;
+ reg = jtype_target(inst) << 2 ;
+ pc = reg + ((pc+4) & 0xf0000000) ;
+ /* Whats this mysterious 0xf000000 adjustment ??? */
+ }
+ break ;
+ /* FIXME case JALX :*/
+ { unsigned long reg ;
+ reg = jtype_target(inst) << 2 ;
+ pc = reg + ((pc+4) & 0xf0000000) + 1 ; /* yes, +1 */
+ /* Add 1 to indicate 16 bit mode - Invert ISA mode */
+ }
+ break ; /* The new PC will be alternate mode */
+ case 4 : /* BEQ , BEQL */
+ equal_branch :
+ if (read_register(itype_rs(inst)) ==
+ read_register(itype_rt(inst)))
+ pc += mips32_relative_offset(inst) + 4 ;
+ else pc += 8 ;
+ break ;
+ case 5 : /* BNE , BNEL */
+ neq_branch :
+ if (read_register(itype_rs(inst)) !=
+ read_register(itype_rs(inst)))
+ pc += mips32_relative_offset(inst) + 4 ;
+ else pc += 8 ;
+ break ;
+ case 6 : /* BLEZ , BLEZL */
+ less_zero_branch:
+ if (read_register(itype_rs(inst) <= 0))
+ pc += mips32_relative_offset(inst) + 4 ;
+ else pc += 8 ;
+ break ;
+ case 7 :
+ greater_branch : /* BGTZ BGTZL */
+ if (read_register(itype_rs(inst) > 0))
+ pc += mips32_relative_offset(inst) + 4 ;
+ else pc += 8 ;
+ break ;
+ default : pc += 8 ;
+ } /* switch */
+ } /* else */
+ return pc ;
+} /* mips32_next_pc */
+
+/* Decoding the next place to set a breakpoint is irregular for the
+ mips 16 variant, but fortunatly, there fewer instructions. We have to cope
+ ith extensions for 16 bit instructions and a pair of actual 32 bit instructions.
+ We dont want to set a single step instruction on the extend instruction
+ either.
+ */
+
+/* Lots of mips16 instruction formats */
+/* Predicting jumps requires itype,ritype,i8type
+ and their extensions extItype,extritype,extI8type
+ */
+enum mips16_inst_fmts
+{
+ itype, /* 0 immediate 5,10 */
+ ritype, /* 1 5,3,8 */
+ rrtype, /* 2 5,3,3,5 */
+ rritype, /* 3 5,3,3,5 */
+ rrrtype, /* 4 5,3,3,3,2 */
+ rriatype, /* 5 5,3,3,1,4 */
+ shifttype, /* 6 5,3,3,3,2 */
+ i8type, /* 7 5,3,8 */
+ i8movtype, /* 8 5,3,3,5 */
+ i8mov32rtype, /* 9 5,3,5,3 */
+ i64type, /* 10 5,3,8 */
+ ri64type, /* 11 5,3,3,5 */
+ jalxtype, /* 12 5,1,5,5,16 - a 32 bit instruction */
+ exiItype, /* 13 5,6,5,5,1,1,1,1,1,1,5 */
+ extRitype, /* 14 5,6,5,5,3,1,1,1,5 */
+ extRRItype, /* 15 5,5,5,5,3,3,5 */
+ extRRIAtype, /* 16 5,7,4,5,3,3,1,4 */
+ EXTshifttype, /* 17 5,5,1,1,1,1,1,1,5,3,3,1,1,1,2 */
+ extI8type, /* 18 5,6,5,5,3,1,1,1,5 */
+ extI64type, /* 19 5,6,5,5,3,1,1,1,5 */
+ extRi64type, /* 20 5,6,5,5,3,3,5 */
+ extshift64type /* 21 5,5,1,1,1,1,1,1,5,1,1,1,3,5 */
+} ;
+/* I am heaping all the fields of the formats into one structure and then,
+ only the fields which are involved in instruction extension */
+struct upk_mips16
+{
+ unsigned short inst ;
+ enum mips16_inst_fmts fmt ;
+ unsigned long offset ;
+ unsigned int regx ; /* Function in i8 type */
+ unsigned int regy ;
+} ;
+
+
+
+static void print_unpack(char * comment,
+ struct upk_mips16 * u)
+{
+ printf("%s %04x ,f(%d) off(%08x) (x(%x) y(%x)\n",
+ comment,u->inst,u->fmt,u->offset,u->regx,u->regy) ;
+}
+
+/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same
+ format for the bits which make up the immediatate extension.
+ */
+static unsigned long
+extended_offset(unsigned long extension)
+{
+ unsigned long value ;
+ value = (extension >> 21) & 0x3f ; /* * extract 15:11 */
+ value = value << 6 ;
+ value |= (extension >> 16) & 0x1f ; /* extrace 10:5 */
+ value = value << 5 ;
+ value |= extension & 0x01f ; /* extract 4:0 */
+ return value ;
+}
+
+/* Only call this function if you know that this is an extendable
+ instruction, It wont malfunction, but why make excess remote memory references?
+ If the immediate operands get sign extended or somthing, do it after
+ the extension is performed.
+ */
+/* FIXME: Every one of these cases needs to worry about sign extension
+ when the offset is to be used in relative addressing */
+
+
+static unsigned short fetch_mips_16(CORE_ADDR pc)
+{
+ char buf[8] ;
+ pc &= 0xfffffffe ; /* clear the low order bit */
+ target_read_memory(pc,buf,2) ;
+ return extract_unsigned_integer(buf,2) ;
+}
+
+static void
+unpack_mips16(CORE_ADDR pc,
+ struct upk_mips16 * upk)
+{
+ CORE_ADDR extpc ;
+ unsigned long extension ;
+ int extended ;
+ extpc = (pc - 4) & ~0x01 ; /* Extensions are 32 bit instructions */
+ /* Decrement to previous address and loose the 16bit mode flag */
+ /* return if the instruction was extendable, but not actually extended */
+ extended = ((mips32_op(extension) == 30) ? 1 : 0) ;
+ if (extended) { extension = mips_fetch_instruction(extpc) ;}
+ switch (upk->fmt)
+ {
+ case itype :
+ {
+ unsigned long value ;
+ if (extended)
+ { value = extended_offset(extension) ;
+ value = value << 11 ; /* rom for the original value */
+ value |= upk->inst & 0x7ff ; /* eleven bits from instruction */
+ }
+ else
+ { value = upk->inst & 0x7ff ;
+ /* FIXME : Consider sign extension */
+ }
+ upk->offset = value ;
+ }
+ break ;
+ case ritype :
+ case i8type :
+ { /* A register identifier and an offset */
+ /* Most of the fields are the same as I type but the
+ immediate value is of a different length */
+ unsigned long value ;
+ if (extended)
+ {
+ value = extended_offset(extension) ;
+ value = value << 8 ; /* from the original instruction */
+ value |= upk->inst & 0xff ; /* eleven bits from instruction */
+ upk->regx = (extension >> 8) & 0x07 ; /* or i8 funct */
+ if (value & 0x4000) /* test the sign bit , bit 26 */
+ { value &= ~ 0x3fff ; /* remove the sign bit */
+ value = -value ;
+ }
+ }
+ else {
+ value = upk->inst & 0xff ; /* 8 bits */
+ upk->regx = (upk->inst >> 8) & 0x07 ; /* or i8 funct */
+ /* FIXME: Do sign extension , this format needs it */
+ if (value & 0x80) /* THIS CONFUSES ME */
+ { value &= 0xef ; /* remove the sign bit */
+ value = -value ;
+ }
+
+ }
+ upk->offset = value ;
+ break ;
+ }
+ case jalxtype :
+ {
+ unsigned long value ;
+ unsigned short nexthalf ;
+ value = ((upk->inst & 0x1f) << 5) | ((upk->inst >> 5) & 0x1f) ;
+ value = value << 16 ;
+ nexthalf = mips_fetch_instruction(pc+2) ; /* low bit still set */
+ value |= nexthalf ;
+ upk->offset = value ;
+ break ;
+ }
+ default:
+ printf_filtered("Decoding unimplemented instruction format type\n") ;
+ break ;
+ }
+ /* print_unpack("UPK",upk) ; */
+}
+
+
+#define mips16_op(x) (x >> 11)
+
+/* This is a map of the opcodes which ae known to perform branches */
+static unsigned char map16[32] =
+{ 0,0,1,1,1,1,0,0,
+ 0,0,0,0,1,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,1,1,0
+} ;
+
+static CORE_ADDR add_offset_16(CORE_ADDR pc, int offset)
+{
+ return ((offset << 2) | ((pc + 2) & (0xf0000000))) ;
+
+}
+
+
+
+static struct upk_mips16 upk ;
+
+CORE_ADDR mips16_next_pc(CORE_ADDR pc)
+{
+ int op ;
+ t_inst inst ;
+ /* inst = mips_fetch_instruction(pc) ; - This doesnt always work */
+ inst = fetch_mips_16(pc) ;
+ upk.inst = inst ;
+ op = mips16_op(upk.inst) ;
+ if (map16[op])
+ {
+ int reg ;
+ switch (op)
+ {
+ case 2 : /* Branch */
+ upk.fmt = itype ;
+ unpack_mips16(pc,&upk) ;
+ { long offset ;
+ offset = upk.offset ;
+ if (offset & 0x800)
+ { offset &= 0xeff ;
+ offset = - offset ;
+ }
+ pc += (offset << 1) + 2 ;
+ }
+ break ;
+ case 3 : /* JAL , JALX - Watch out, these are 32 bit instruction*/
+ upk.fmt = jalxtype ;
+ unpack_mips16(pc,&upk) ;
+ pc = add_offset_16(pc,upk.offset) ;
+ if ((upk.inst >> 10) & 0x01) /* Exchange mode */
+ pc = pc & ~ 0x01 ; /* Clear low bit, indicate 32 bit mode */
+ else pc |= 0x01 ;
+ break ;
+ case 4 : /* beqz */
+ upk.fmt = ritype ;
+ unpack_mips16(pc,&upk) ;
+ reg = read_register(upk.regx) ;
+ if (reg == 0)
+ pc += (upk.offset << 1) + 2 ;
+ else pc += 2 ;
+ break ;
+ case 5 : /* bnez */
+ upk.fmt = ritype ;
+ unpack_mips16(pc,&upk) ;
+ reg = read_register(upk.regx) ;
+ if (reg != 0)
+ pc += (upk.offset << 1) + 2 ;
+ else pc += 2 ;
+ break ;
+ case 12 : /* I8 Formats btez btnez */
+ upk.fmt = i8type ;
+ unpack_mips16(pc,&upk) ;
+ /* upk.regx contains the opcode */
+ reg = read_register(24) ; /* Test register is 24 */
+ if (((upk.regx == 0) && (reg == 0)) /* BTEZ */
+ || ((upk.regx == 1 ) && (reg != 0))) /* BTNEZ */
+ /* pc = add_offset_16(pc,upk.offset) ; */
+ pc += (upk.offset << 1) + 2 ;
+ else pc += 2 ;
+ break ;
+ case 29 : /* RR Formats JR, JALR, JALR-RA */
+ upk.fmt = rrtype ;
+ op = upk.inst & 0x1f ;
+ if (op == 0)
+ {
+ upk.regx = (upk.inst >> 8) & 0x07 ;
+ upk.regy = (upk.inst >> 5) & 0x07 ;
+ switch (upk.regy)
+ {
+ case 0 : reg = upk.regx ; break ;
+ case 1 : reg = 31 ; break ; /* Function return instruction*/
+ case 2 : reg = upk.regx ; break ;
+ default: reg = 31 ; break ; /* BOGUS Guess */
+ }
+ pc = read_register(reg) ;
+ }
+ else pc += 2 ;
+ break ;
+ case 30 : /* This is an extend instruction */
+ pc += 4 ; /* Dont be setting breakpints on the second half */
+ break ;
+ default :
+ printf("Filtered - next PC probably incorrrect due to jump inst\n");
+ pc += 2 ;
+ break ;
+ }
+ }
+ else pc+= 2 ; /* just a good old instruction */
+ /* See if we CAN actually break on the next instruction */
+ /* printf("NXTm16PC %08x\n",(unsigned long)pc) ; */
+ return pc ;
+} /* mips16_next_pc */
+
+/* The mips_next_pc function supports single_tep when the remote target monitor or
+ stub is not developed enough to so a single_step.
+ It works by decoding the current instruction and predicting where a branch
+ will go. This isnt hard because all the data is available.
+ The MIPS32 and MIPS16 variants are quite different
+ */
+CORE_ADDR mips_next_pc(CORE_ADDR pc)
+{
+ t_inst inst ;
+ /* inst = mips_fetch_instruction(pc) ; */
+ /* if (pc_is_mips16) <----- This is failing */
+ if (pc & 0x01)
+ return mips16_next_pc(pc) ;
+ else return mips32_next_pc(pc) ;
+} /* mips_next_pc */
+
/* Guaranteed to set fci->saved_regs to some values (it never leaves it
NULL). */
/* What registers have been saved? Bitmasks. */
unsigned long gen_mask, float_mask;
mips_extra_func_info_t proc_desc;
+ t_inst inst;
- fci->saved_regs = (struct frame_saved_regs *)
- obstack_alloc (&frame_cache_obstack, sizeof(struct frame_saved_regs));
- memset (fci->saved_regs, 0, sizeof (struct frame_saved_regs));
+ frame_saved_regs_zalloc (fci);
/* If it is the frame for sigtramp, the saved registers are located
in a sigcontext structure somewhere on the stack.
#ifndef SIGFRAME_BASE
/* To satisfy alignment restrictions, sigcontext is located 4 bytes
above the sigtramp frame. */
-#define SIGFRAME_BASE 4
-#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * 4)
-#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 3 * 4)
-#define SIGFRAME_FPREGSAVE_OFF (SIGFRAME_REGSAVE_OFF + 32 * 4 + 3 * 4)
+#define SIGFRAME_BASE MIPS_REGSIZE
+/* FIXME! Are these correct?? */
+#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * MIPS_REGSIZE)
+#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 3 * MIPS_REGSIZE)
+#define SIGFRAME_FPREGSAVE_OFF \
+ (SIGFRAME_REGSAVE_OFF + MIPS_NUMREGS * MIPS_REGSIZE + 3 * MIPS_REGSIZE)
#endif
#ifndef SIGFRAME_REG_SIZE
-#define SIGFRAME_REG_SIZE 4
+/* FIXME! Is this correct?? */
+#define SIGFRAME_REG_SIZE MIPS_REGSIZE
#endif
if (fci->signal_handler_caller)
{
- for (ireg = 0; ireg < 32; ireg++)
+ for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
reg_position = fci->frame + SIGFRAME_REGSAVE_OFF
+ ireg * SIGFRAME_REG_SIZE;
- fci->saved_regs->regs[ireg] = reg_position;
+ fci->saved_regs[ireg] = reg_position;
}
- for (ireg = 0; ireg < 32; ireg++)
+ for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
reg_position = fci->frame + SIGFRAME_FPREGSAVE_OFF
+ ireg * SIGFRAME_REG_SIZE;
- fci->saved_regs->regs[FP0_REGNUM + ireg] = reg_position;
+ fci->saved_regs[FP0_REGNUM + ireg] = reg_position;
}
- fci->saved_regs->regs[PC_REGNUM] = fci->frame + SIGFRAME_PC_OFF;
+ fci->saved_regs[PC_REGNUM] = fci->frame + SIGFRAME_PC_OFF;
return;
}
gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK(proc_desc);
float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK(proc_desc);
- if (/* In any frame other than the innermost, we assume that all
- registers have been saved. This assumes that all register
- saves in a function happen before the first function
- call. */
- fci->next == NULL
+ if (/* In any frame other than the innermost or a frame interrupted by
+ a signal, we assume that all registers have been saved.
+ This assumes that all register saves in a function happen before
+ the first function call. */
+ (fci->next == NULL || fci->next->signal_handler_caller)
/* In a dummy frame we know exactly where things are saved. */
&& !PROC_DESC_IS_DUMMY (proc_desc)
claims are saved have been saved yet. */
CORE_ADDR addr;
- int status;
- char buf[4];
- unsigned long inst;
/* Bitmasks; set if we have found a save for the register. */
unsigned long gen_save_found = 0;
unsigned long float_save_found = 0;
+ int instlen;
- for (addr = PROC_LOW_ADDR (proc_desc);
- addr < fci->pc /*&& (gen_mask != gen_save_found
- || float_mask != float_save_found)*/;
- addr += 4)
- {
- status = read_memory_nobpt (addr, buf, 4);
- if (status)
- memory_error (status, addr);
- inst = extract_unsigned_integer (buf, 4);
- if (/* sw reg,n($sp) */
- (inst & 0xffe00000) == 0xafa00000
-
- /* sw reg,n($r30) */
- || (inst & 0xffe00000) == 0xafc00000
-
- /* sd reg,n($sp) */
- || (inst & 0xffe00000) == 0xffa00000)
- {
- /* It might be possible to use the instruction to
- find the offset, rather than the code below which
- is based on things being in a certain order in the
- frame, but figuring out what the instruction's offset
- is relative to might be a little tricky. */
- int reg = (inst & 0x001f0000) >> 16;
- gen_save_found |= (1 << reg);
- }
- else if (/* swc1 freg,n($sp) */
- (inst & 0xffe00000) == 0xe7a00000
-
- /* swc1 freg,n($r30) */
- || (inst & 0xffe00000) == 0xe7c00000
+ /* If the address is odd, assume this is MIPS16 code. */
+ addr = PROC_LOW_ADDR (proc_desc);
+ instlen = pc_is_mips16 (addr) ? MIPS16_INSTLEN : MIPS_INSTLEN;
- /* sdc1 freg,n($sp) */
- || (inst & 0xffe00000) == 0xf7a00000)
-
- {
- int reg = ((inst & 0x001f0000) >> 16);
- float_save_found |= (1 << reg);
- }
+ /* Scan through this function's instructions preceding the current
+ PC, and look for those that save registers. */
+ while (addr < fci->pc)
+ {
+ inst = mips_fetch_instruction (addr);
+ if (pc_is_mips16 (addr))
+ mips16_decode_reg_save (inst, &gen_save_found);
+ else
+ mips32_decode_reg_save (inst, &gen_save_found, &float_save_found);
+ addr += instlen;
}
gen_mask = gen_save_found;
float_mask = float_save_found;
/* Fill in the offsets for the registers which gen_mask says
were saved. */
reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
- for (ireg= 31; gen_mask; --ireg, gen_mask <<= 1)
+ for (ireg= MIPS_NUMREGS-1; gen_mask; --ireg, gen_mask <<= 1)
if (gen_mask & 0x80000000)
{
- fci->saved_regs->regs[ireg] = reg_position;
+ fci->saved_regs[ireg] = reg_position;
reg_position -= MIPS_REGSIZE;
+ /* start-sanitize-r5900 */
+#ifdef R5900_128BIT_GPR_HACK
+ /* Gross. The r5900 has 128bit wide registers, but MIPS_REGSIZE is
+ still 64bits. See the comments in tm.h for a discussion of the
+ various problems this causes. */
+ if (ireg <= RA_REGNUM)
+ reg_position -= MIPS_REGSIZE;
+#endif
+ /* end-sanitize-r5900 */
}
+
+ /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse order
+ of that normally used by gcc. Therefore, we have to fetch the first
+ instruction of the function, and if it's an entry instruction that
+ saves $s0 or $s1, correct their saved addresses. */
+ if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
+ {
+ inst = mips_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ {
+ int reg;
+ int sreg_count = (inst >> 6) & 3;
+
+ /* Check if the ra register was pushed on the stack. */
+ reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
+ if (inst & 0x20)
+ reg_position -= MIPS_REGSIZE;
+
+ /* Check if the s0 and s1 registers were pushed on the stack. */
+ for (reg = 16; reg < sreg_count+16; reg++)
+ {
+ fci->saved_regs[reg] = reg_position;
+ reg_position -= MIPS_REGSIZE;
+ }
+ }
+ }
+
/* Fill in the offsets for the registers which float_mask says
were saved. */
reg_position = fci->frame + PROC_FREG_OFFSET (proc_desc);
/* The freg_offset points to where the first *double* register
is saved. So skip to the high-order word. */
- reg_position += 4;
- for (ireg = 31; float_mask; --ireg, float_mask <<= 1)
+ if (! GDB_TARGET_IS_MIPS64)
+ reg_position += MIPS_REGSIZE;
+
+ /* Fill in the offsets for the float registers which float_mask says
+ were saved. */
+ for (ireg = MIPS_NUMREGS-1; float_mask; --ireg, float_mask <<= 1)
if (float_mask & 0x80000000)
{
- fci->saved_regs->regs[FP0_REGNUM+ireg] = reg_position;
+ fci->saved_regs[FP0_REGNUM+ireg] = reg_position;
reg_position -= MIPS_REGSIZE;
}
- fci->saved_regs->regs[PC_REGNUM] = fci->saved_regs->regs[RA_REGNUM];
+ fci->saved_regs[PC_REGNUM] = fci->saved_regs[RA_REGNUM];
}
-static int
+static CORE_ADDR
read_next_frame_reg(fi, regno)
struct frame_info *fi;
int regno;
{
if (fi->saved_regs == NULL)
mips_find_saved_regs (fi);
- if (fi->saved_regs->regs[regno])
- return read_memory_integer(fi->saved_regs->regs[regno], MIPS_REGSIZE);
+ if (fi->saved_regs[regno])
+ return read_memory_integer(fi->saved_regs[regno], MIPS_REGSIZE);
}
}
return read_register (regno);
}
-int
+/* mips_addr_bits_remove - remove useless address bits */
+
+CORE_ADDR
+mips_addr_bits_remove (addr)
+ CORE_ADDR addr;
+{
+#if GDB_TARGET_IS_MIPS64
+ if (mask_address_p && (addr >> 32 == (CORE_ADDR)0xffffffff))
+ {
+ /* This hack is a work-around for existing boards using PMON,
+ the simulator, and any other 64-bit targets that doesn't have
+ true 64-bit addressing. On these targets, the upper 32 bits
+ of addresses are ignored by the hardware. Thus, the PC or SP
+ are likely to have been sign extended to all 1s by instruction
+ sequences that load 32-bit addresses. For example, a typical
+ piece of code that loads an address is this:
+ lui $r2, <upper 16 bits>
+ ori $r2, <lower 16 bits>
+ But the lui sign-extends the value such that the upper 32 bits
+ may be all 1s. The workaround is simply to mask off these bits.
+ In the future, gcc may be changed to support true 64-bit
+ addressing, and this masking will have to be disabled. */
+ addr &= (CORE_ADDR)0xffffffff;
+ }
+#else
+ /* Even when GDB is configured for some 32-bit targets (e.g. mips-elf),
+ BFD is configured to handle 64-bit targets, so CORE_ADDR is 64 bits.
+ So we still have to mask off useless bits from addresses. */
+ addr &= (CORE_ADDR)0xffffffff;
+#endif
+
+ return addr;
+}
+
+void
+mips_init_frame_pc_first (fromleaf, prev)
+ int fromleaf;
+ struct frame_info *prev;
+{
+ CORE_ADDR pc, tmp;
+
+ pc = ((fromleaf) ? SAVED_PC_AFTER_CALL (prev->next) :
+ prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
+ tmp = mips_skip_stub (pc);
+ prev->pc = tmp ? tmp : pc;
+}
+
+
+CORE_ADDR
mips_frame_saved_pc(frame)
struct frame_info *frame;
{
+ CORE_ADDR saved_pc;
mips_extra_func_info_t proc_desc = frame->proc_desc;
/* We have to get the saved pc from the sigcontext
if it is a signal handler frame. */
: (proc_desc ? PROC_PC_REG(proc_desc) : RA_REGNUM);
if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
- return read_memory_integer(frame->frame - 4, 4);
+ saved_pc = read_memory_integer(frame->frame - MIPS_REGSIZE, MIPS_REGSIZE);
+ else
+ saved_pc = read_next_frame_reg(frame, pcreg);
- return read_next_frame_reg(frame, pcreg);
+ return ADDR_BITS_REMOVE (saved_pc);
}
static struct mips_extra_func_info temp_proc_desc;
static struct frame_saved_regs temp_saved_regs;
+/* Set a register's saved stack address in temp_saved_regs. If an address
+ has already been set for this register, do nothing; this way we will
+ only recognize the first save of a given register in a function prologue.
+ This is a helper function for mips{16,32}_heuristic_proc_desc. */
+
+static void
+set_reg_offset (regno, offset)
+ int regno;
+ CORE_ADDR offset;
+{
+ if (temp_saved_regs.regs[regno] == 0)
+ temp_saved_regs.regs[regno] = offset;
+}
+
+
+/* Test whether the PC points to the return instruction at the
+ end of a function. */
+
+static int
+mips_about_to_return (pc)
+ CORE_ADDR pc;
+{
+ if (pc_is_mips16 (pc))
+ /* This mips16 case isn't necessarily reliable. Sometimes the compiler
+ generates a "jr $ra"; other times it generates code to load
+ the return address from the stack to an accessible register (such
+ as $a3), then a "jr" using that register. This second case
+ is almost impossible to distinguish from an indirect jump
+ used for switch statements, so we don't even try. */
+ return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */
+ else
+ return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */
+}
+
+
/* This fencepost looks highly suspicious to me. Removing it also
seems suspicious as it could affect remote debugging across serial
lines. */
static CORE_ADDR
-heuristic_proc_start(pc)
+heuristic_proc_start (pc)
CORE_ADDR pc;
{
- CORE_ADDR start_pc = pc;
- CORE_ADDR fence = start_pc - heuristic_fence_post;
-
+ CORE_ADDR start_pc;
+ CORE_ADDR fence;
+ int instlen;
+ int seen_adjsp = 0;
+
+ pc = ADDR_BITS_REMOVE (pc);
+ start_pc = pc;
+ fence = start_pc - heuristic_fence_post;
if (start_pc == 0) return 0;
if (heuristic_fence_post == UINT_MAX
|| fence < VM_MIN_ADDRESS)
fence = VM_MIN_ADDRESS;
+ instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+
/* search back for previous return */
- for (start_pc -= 4; ; start_pc -= 4)
+ for (start_pc -= instlen; ; start_pc -= instlen)
if (start_pc < fence)
{
/* It's not clear to me why we reach this point when
else
warning("Hit heuristic-fence-post without finding");
- warning("enclosing function for address 0x%x", pc);
+ warning("enclosing function for address 0x%s", paddr_nz (pc));
if (!blurb_printed)
{
printf_filtered ("\
return 0;
}
- else if (ABOUT_TO_RETURN(start_pc))
+ else if (pc_is_mips16 (start_pc))
+ {
+ unsigned short inst;
+
+ /* On MIPS16, any one of the following is likely to be the
+ start of a function:
+ entry
+ addiu sp,-n
+ daddiu sp,-n
+ extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */
+ inst = mips_fetch_instruction (start_pc);
+ if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
+ || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
+ || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
+ break;
+ else if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ seen_adjsp = 1;
+ else
+ seen_adjsp = 0;
+ }
+ else if (mips_about_to_return (start_pc))
+ {
+ start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
break;
+ }
- start_pc += 8; /* skip return, and its delay slot */
#if 0
/* skip nops (usually 1) 0 - is this */
- while (start_pc < pc && read_memory_integer (start_pc, 4) == 0)
- start_pc += 4;
+ while (start_pc < pc && read_memory_integer (start_pc, MIPS_INSTLEN) == 0)
+ start_pc += MIPS_INSTLEN;
#endif
return start_pc;
}
-static mips_extra_func_info_t
-heuristic_proc_desc(start_pc, limit_pc, next_frame)
- CORE_ADDR start_pc, limit_pc;
- struct frame_info *next_frame;
+/* Fetch the immediate value from a MIPS16 instruction.
+ If the previous instruction was an EXTEND, use it to extend
+ the upper bits of the immediate value. This is a helper function
+ for mips16_heuristic_proc_desc. */
+
+static int
+mips16_get_imm (prev_inst, inst, nbits, scale, is_signed)
+ unsigned short prev_inst; /* previous instruction */
+ unsigned short inst; /* current instruction */
+ int nbits; /* number of bits in imm field */
+ int scale; /* scale factor to be applied to imm */
+ int is_signed; /* is the imm field signed? */
{
- CORE_ADDR sp = read_next_frame_reg (next_frame, SP_REGNUM);
- CORE_ADDR cur_pc;
- int frame_size;
- int has_frame_reg = 0;
- int reg30 = 0; /* Value of $r30. Used by gcc for frame-pointer */
- unsigned long reg_mask = 0;
-
- if (start_pc == 0) return NULL;
- memset (&temp_proc_desc, '\0', sizeof(temp_proc_desc));
- memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
- PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
-
- if (start_pc + 200 < limit_pc)
- limit_pc = start_pc + 200;
- restart:
- frame_size = 0;
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += 4) {
- char buf[4];
- unsigned long word;
- int status;
-
- status = read_memory_nobpt (cur_pc, buf, 4);
- if (status) memory_error (status, cur_pc);
- word = extract_unsigned_integer (buf, 4);
-
- if ((word & 0xFFFF0000) == 0x27bd0000) /* addiu $sp,$sp,-i */
- frame_size += (-word) & 0xFFFF;
- else if ((word & 0xFFFF0000) == 0x23bd0000) /* addu $sp,$sp,-i */
- frame_size += (-word) & 0xFFFF;
- else if ((word & 0xFFE00000) == 0xafa00000) { /* sw reg,offset($sp) */
- int reg = (word & 0x001F0000) >> 16;
- reg_mask |= 1 << reg;
- temp_saved_regs.regs[reg] = sp + (word & 0xffff);
- }
- else if ((word & 0xFFFF0000) == 0x27be0000) { /* addiu $30,$sp,size */
- if ((word & 0xffff) != frame_size)
- reg30 = sp + (word & 0xffff);
- else if (!has_frame_reg) {
- int alloca_adjust;
- has_frame_reg = 1;
- reg30 = read_next_frame_reg(next_frame, 30);
- alloca_adjust = reg30 - (sp + (word & 0xffff));
- if (alloca_adjust > 0) {
- /* FP > SP + frame_size. This may be because
- * of an alloca or somethings similar.
- * Fix sp to "pre-alloca" value, and try again.
- */
- sp += alloca_adjust;
- goto restart;
- }
- }
- }
- else if ((word & 0xFFE00000) == 0xafc00000) { /* sw reg,offset($30) */
- int reg = (word & 0x001F0000) >> 16;
- reg_mask |= 1 << reg;
- temp_saved_regs.regs[reg] = reg30 + (word & 0xffff);
- }
- }
- if (has_frame_reg) {
- PROC_FRAME_REG(&temp_proc_desc) = 30;
- PROC_FRAME_OFFSET(&temp_proc_desc) = 0;
+ int offset;
+
+ if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */
+ {
+ offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0);
+ if (offset & 0x8000) /* check for negative extend */
+ offset = 0 - (0x10000 - (offset & 0xffff));
+ return offset | (inst & 0x1f);
}
- else {
- PROC_FRAME_REG(&temp_proc_desc) = SP_REGNUM;
- PROC_FRAME_OFFSET(&temp_proc_desc) = frame_size;
+ else
+ {
+ int max_imm = 1 << nbits;
+ int mask = max_imm - 1;
+ int sign_bit = max_imm >> 1;
+
+ offset = inst & mask;
+ if (is_signed && (offset & sign_bit))
+ offset = 0 - (max_imm - offset);
+ return offset * scale;
}
- PROC_REG_MASK(&temp_proc_desc) = reg_mask;
- PROC_PC_REG(&temp_proc_desc) = RA_REGNUM;
- return &temp_proc_desc;
}
-static mips_extra_func_info_t
-find_proc_desc (pc, next_frame)
- CORE_ADDR pc;
- struct frame_info *next_frame;
+
+/* Fill in values in temp_proc_desc based on the MIPS16 instruction
+ stream from start_pc to limit_pc. */
+
+static void
+mips16_heuristic_proc_desc(start_pc, limit_pc, next_frame, sp)
+ CORE_ADDR start_pc, limit_pc;
+ struct frame_info *next_frame;
+ CORE_ADDR sp;
{
- mips_extra_func_info_t proc_desc;
- struct block *b = block_for_pc(pc);
- struct symbol *sym;
- CORE_ADDR startaddr;
+ CORE_ADDR cur_pc;
+ CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */
+ unsigned short prev_inst = 0; /* saved copy of previous instruction */
+ unsigned inst = 0; /* current instruction */
+ unsigned entry_inst = 0; /* the entry instruction */
+ int reg, offset;
- find_pc_partial_function (pc, NULL, &startaddr, NULL);
- if (b == NULL)
- sym = NULL;
+ PROC_FRAME_OFFSET(&temp_proc_desc) = 0; /* size of stack frame */
+ PROC_FRAME_ADJUST(&temp_proc_desc) = 0; /* offset of FP from SP */
+
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN)
+ {
+ /* Save the previous instruction. If it's an EXTEND, we'll extract
+ the immediate offset extension from it in mips16_get_imm. */
+ prev_inst = inst;
+
+ /* Fetch and decode the instruction. */
+ inst = (unsigned short) mips_fetch_instruction (cur_pc);
+ if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 8, 1);
+ if (offset < 0) /* negative stack adjustment? */
+ PROC_FRAME_OFFSET(&temp_proc_desc) -= offset;
+ else
+ /* Exit loop if a positive stack adjustment is found, which
+ usually means that the stack cleanup code in the function
+ epilogue is reached. */
+ break;
+ }
+ else if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ reg = mips16_to_32_reg[(inst & 0x700) >> 8];
+ PROC_REG_MASK(&temp_proc_desc) |= (1 << reg);
+ set_reg_offset (reg, sp + offset);
+ }
+ else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK(&temp_proc_desc) |= (1 << reg);
+ set_reg_offset (reg, sp + offset);
+ }
+ else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ PROC_REG_MASK(&temp_proc_desc) |= (1 << RA_REGNUM);
+ set_reg_offset (RA_REGNUM, sp + offset);
+ }
+ else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
+ PROC_REG_MASK(&temp_proc_desc) |= (1 << RA_REGNUM);
+ set_reg_offset (RA_REGNUM, sp + offset);
+ }
+ else if (inst == 0x673d) /* move $s1, $sp */
+ {
+ frame_addr = sp;
+ PROC_FRAME_REG (&temp_proc_desc) = 17;
+ }
+ else if ((inst & 0xff00) == 0x0100) /* addiu $s1,sp,n */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ frame_addr = sp + offset;
+ PROC_FRAME_REG (&temp_proc_desc) = 17;
+ PROC_FRAME_ADJUST (&temp_proc_desc) = offset;
+ }
+ else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, frame_addr + offset);
+ }
+ else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, frame_addr + offset);
+ }
+ else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ entry_inst = inst; /* save for later processing */
+ else if ((inst & 0xf800) == 0x1800) /* jal(x) */
+ cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */
+ }
+
+ /* The entry instruction is typically the first instruction in a function,
+ and it stores registers at offsets relative to the value of the old SP
+ (before the prologue). But the value of the sp parameter to this
+ function is the new SP (after the prologue has been executed). So we
+ can't calculate those offsets until we've seen the entire prologue,
+ and can calculate what the old SP must have been. */
+ if (entry_inst != 0)
+ {
+ int areg_count = (entry_inst >> 8) & 7;
+ int sreg_count = (entry_inst >> 6) & 3;
+
+ /* The entry instruction always subtracts 32 from the SP. */
+ PROC_FRAME_OFFSET(&temp_proc_desc) += 32;
+
+ /* Now we can calculate what the SP must have been at the
+ start of the function prologue. */
+ sp += PROC_FRAME_OFFSET(&temp_proc_desc);
+
+ /* Check if a0-a3 were saved in the caller's argument save area. */
+ for (reg = 4, offset = 0; reg < areg_count+4; reg++)
+ {
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + offset);
+ offset += MIPS_REGSIZE;
+ }
+
+ /* Check if the ra register was pushed on the stack. */
+ offset = -4;
+ if (entry_inst & 0x20)
+ {
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << RA_REGNUM;
+ set_reg_offset (RA_REGNUM, sp + offset);
+ offset -= MIPS_REGSIZE;
+ }
+
+ /* Check if the s0 and s1 registers were pushed on the stack. */
+ for (reg = 16; reg < sreg_count+16; reg++)
+ {
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + offset);
+ offset -= MIPS_REGSIZE;
+ }
+ }
+}
+
+static void
+mips32_heuristic_proc_desc(start_pc, limit_pc, next_frame, sp)
+ CORE_ADDR start_pc, limit_pc;
+ struct frame_info *next_frame;
+ CORE_ADDR sp;
+{
+ CORE_ADDR cur_pc;
+ CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
+restart:
+ memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
+ PROC_FRAME_OFFSET(&temp_proc_desc) = 0;
+ PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN)
+ {
+ unsigned long inst, high_word, low_word;
+ int reg;
+
+ /* Fetch the instruction. */
+ inst = (unsigned long) mips_fetch_instruction (cur_pc);
+
+ /* Save some code by pre-extracting some useful fields. */
+ high_word = (inst >> 16) & 0xffff;
+ low_word = inst & 0xffff;
+ reg = high_word & 0x1f;
+
+ if (high_word == 0x27bd /* addiu $sp,$sp,-i */
+ || high_word == 0x23bd /* addi $sp,$sp,-i */
+ || high_word == 0x67bd) /* daddiu $sp,$sp,-i */
+ {
+ if (low_word & 0x8000) /* negative stack adjustment? */
+ PROC_FRAME_OFFSET(&temp_proc_desc) += 0x10000 - low_word;
+ else
+ /* Exit loop if a positive stack adjustment is found, which
+ usually means that the stack cleanup code in the function
+ epilogue is reached. */
+ break;
+ }
+ else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
+ {
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + low_word);
+ }
+ else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
+ {
+ /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra,
+ but the register size used is only 32 bits. Make the address
+ for the saved register point to the lower 32 bits. */
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + low_word + 8 - MIPS_REGSIZE);
+ }
+ /* start-sanitize-r5900 */
+ else if ((high_word & 0xFFE0) == 0x7fa0) /* sq reg,offset($sp) */
+ {
+ /* I don't think we have to worry about the Irix 6.2 N32 ABI
+ issue noted int he sd reg, offset($sp) case above. */
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + low_word);
+ }
+ /* end-sanitize-r5900 */
+ else if (high_word == 0x27be) /* addiu $30,$sp,size */
+ {
+ /* Old gcc frame, r30 is virtual frame pointer. */
+ if ((long)low_word != PROC_FRAME_OFFSET(&temp_proc_desc))
+ frame_addr = sp + low_word;
+ else if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
+ {
+ unsigned alloca_adjust;
+ PROC_FRAME_REG (&temp_proc_desc) = 30;
+ frame_addr = read_next_frame_reg(next_frame, 30);
+ alloca_adjust = (unsigned)(frame_addr - (sp + low_word));
+ if (alloca_adjust > 0)
+ {
+ /* FP > SP + frame_size. This may be because
+ * of an alloca or somethings similar.
+ * Fix sp to "pre-alloca" value, and try again.
+ */
+ sp += alloca_adjust;
+ goto restart;
+ }
+ }
+ }
+ /* move $30,$sp. With different versions of gas this will be either
+ `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
+ Accept any one of these. */
+ else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+ {
+ /* New gcc frame, virtual frame pointer is at r30 + frame_size. */
+ if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
+ {
+ unsigned alloca_adjust;
+ PROC_FRAME_REG (&temp_proc_desc) = 30;
+ frame_addr = read_next_frame_reg(next_frame, 30);
+ alloca_adjust = (unsigned)(frame_addr - sp);
+ if (alloca_adjust > 0)
+ {
+ /* FP > SP + frame_size. This may be because
+ * of an alloca or somethings similar.
+ * Fix sp to "pre-alloca" value, and try again.
+ */
+ sp += alloca_adjust;
+ goto restart;
+ }
+ }
+ }
+ else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
+ {
+ PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, frame_addr + low_word);
+ }
+ }
+}
+
+static mips_extra_func_info_t
+heuristic_proc_desc(start_pc, limit_pc, next_frame)
+ CORE_ADDR start_pc, limit_pc;
+ struct frame_info *next_frame;
+{
+ CORE_ADDR sp = read_next_frame_reg (next_frame, SP_REGNUM);
+
+ if (start_pc == 0) return NULL;
+ memset (&temp_proc_desc, '\0', sizeof(temp_proc_desc));
+ memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
+ PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
+ PROC_FRAME_REG (&temp_proc_desc) = SP_REGNUM;
+ PROC_PC_REG (&temp_proc_desc) = RA_REGNUM;
+
+ if (start_pc + 200 < limit_pc)
+ limit_pc = start_pc + 200;
+ if (pc_is_mips16 (start_pc))
+ mips16_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+ else
+ mips32_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+ return &temp_proc_desc;
+}
+
+static mips_extra_func_info_t
+non_heuristic_proc_desc (pc, addrptr)
+ CORE_ADDR pc;
+ CORE_ADDR *addrptr;
+{
+ CORE_ADDR startaddr;
+ mips_extra_func_info_t proc_desc;
+ struct block *b = block_for_pc(pc);
+ struct symbol *sym;
+
+ find_pc_partial_function (pc, NULL, &startaddr, NULL);
+ if (addrptr)
+ *addrptr = startaddr;
+ if (b == NULL || PC_IN_CALL_DUMMY (pc, 0, 0))
+ sym = NULL;
else
{
if (startaddr > BLOCK_START (b))
symbol reading. */
sym = NULL;
else
- sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE,
- 0, NULL);
+ sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, 0, NULL);
}
/* If we never found a PDR for this function in symbol reading, then
examine prologues to find the information. */
- if (sym && ((mips_extra_func_info_t) SYMBOL_VALUE (sym))->pdr.framereg == -1)
- sym = NULL;
-
if (sym)
{
- /* IF this is the topmost frame AND
- * (this proc does not have debugging information OR
- * the PC is in the procedure prologue)
- * THEN create a "heuristic" proc_desc (by analyzing
- * the actual code) to replace the "official" proc_desc.
- */
- proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym);
- if (next_frame == NULL) {
- struct symtab_and_line val;
- struct symbol *proc_symbol =
- PROC_DESC_IS_DUMMY(proc_desc) ? 0 : PROC_SYMBOL(proc_desc);
-
- if (proc_symbol) {
- val = find_pc_line (BLOCK_START
- (SYMBOL_BLOCK_VALUE(proc_symbol)),
- 0);
- val.pc = val.end ? val.end : pc;
+ proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym);
+ if (PROC_FRAME_REG (proc_desc) == -1)
+ return NULL;
+ else
+ return proc_desc;
+ }
+ else
+ return NULL;
+}
+
+
+static mips_extra_func_info_t
+find_proc_desc (pc, next_frame)
+ CORE_ADDR pc;
+ struct frame_info *next_frame;
+{
+ mips_extra_func_info_t proc_desc;
+ CORE_ADDR startaddr;
+
+ proc_desc = non_heuristic_proc_desc (pc, &startaddr);
+
+ if (proc_desc)
+ {
+ /* IF this is the topmost frame AND
+ * (this proc does not have debugging information OR
+ * the PC is in the procedure prologue)
+ * THEN create a "heuristic" proc_desc (by analyzing
+ * the actual code) to replace the "official" proc_desc.
+ */
+ if (next_frame == NULL)
+ {
+ struct symtab_and_line val;
+ struct symbol *proc_symbol =
+ PROC_DESC_IS_DUMMY(proc_desc) ? 0 : PROC_SYMBOL(proc_desc);
+
+ if (proc_symbol)
+ {
+ val = find_pc_line (BLOCK_START
+ (SYMBOL_BLOCK_VALUE(proc_symbol)),
+ 0);
+ val.pc = val.end ? val.end : pc;
}
- if (!proc_symbol || pc < val.pc) {
- mips_extra_func_info_t found_heuristic =
- heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
- pc, next_frame);
- if (found_heuristic)
- proc_desc = found_heuristic;
+ if (!proc_symbol || pc < val.pc)
+ {
+ mips_extra_func_info_t found_heuristic =
+ heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
+ pc, next_frame);
+ if (found_heuristic)
+ proc_desc = found_heuristic;
}
}
}
return proc_desc;
}
+static CORE_ADDR
+get_frame_pointer(frame, proc_desc)
+ struct frame_info *frame;
+ mips_extra_func_info_t proc_desc;
+{
+ return ADDR_BITS_REMOVE (
+ read_next_frame_reg (frame, PROC_FRAME_REG (proc_desc)) +
+ PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
+}
+
mips_extra_func_info_t cached_proc_desc;
CORE_ADDR
mips_frame_chain(frame)
struct frame_info *frame;
{
- mips_extra_func_info_t proc_desc;
- CORE_ADDR saved_pc = FRAME_SAVED_PC(frame);
-
- if (saved_pc == 0 || inside_entry_file (saved_pc))
- return 0;
-
- proc_desc = find_proc_desc(saved_pc, frame);
- if (!proc_desc)
- return 0;
-
- cached_proc_desc = proc_desc;
-
- /* If no frame pointer and frame size is zero, we must be at end
- of stack (or otherwise hosed). If we don't check frame size,
- we loop forever if we see a zero size frame. */
- if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
- && PROC_FRAME_OFFSET (proc_desc) == 0
- /* The previous frame from a sigtramp frame might be frameless
- and have frame size zero. */
- && !frame->signal_handler_caller)
- return 0;
- else
- return read_next_frame_reg(frame, PROC_FRAME_REG(proc_desc))
- + PROC_FRAME_OFFSET(proc_desc);
+ mips_extra_func_info_t proc_desc;
+ CORE_ADDR tmp;
+ CORE_ADDR saved_pc = FRAME_SAVED_PC(frame);
+
+ if (saved_pc == 0 || inside_entry_file (saved_pc))
+ return 0;
+
+ /* Check if the PC is inside a call stub. If it is, fetch the
+ PC of the caller of that stub. */
+ if ((tmp = mips_skip_stub (saved_pc)) != 0)
+ saved_pc = tmp;
+
+ /* Look up the procedure descriptor for this PC. */
+ proc_desc = find_proc_desc(saved_pc, frame);
+ if (!proc_desc)
+ return 0;
+
+ cached_proc_desc = proc_desc;
+
+ /* If no frame pointer and frame size is zero, we must be at end
+ of stack (or otherwise hosed). If we don't check frame size,
+ we loop forever if we see a zero size frame. */
+ if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+ && PROC_FRAME_OFFSET (proc_desc) == 0
+ /* The previous frame from a sigtramp frame might be frameless
+ and have frame size zero. */
+ && !frame->signal_handler_caller)
+ return 0;
+ else
+ return get_frame_pointer (frame, proc_desc);
}
void
init_extra_frame_info(fci)
struct frame_info *fci;
{
+ int regnum;
+
/* Use proc_desc calculated in frame_chain */
mips_extra_func_info_t proc_desc =
fci->next ? cached_proc_desc : find_proc_desc(fci->pc, fci->next);
&& !PROC_DESC_IS_DUMMY (proc_desc))
fci->frame = read_next_frame_reg (fci->next, SP_REGNUM);
else
- fci->frame =
- read_next_frame_reg (fci->next, PROC_FRAME_REG (proc_desc))
- + PROC_FRAME_OFFSET (proc_desc);
+ fci->frame = get_frame_pointer (fci->next, proc_desc);
if (proc_desc == &temp_proc_desc)
{
(CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
if (!IN_SIGTRAMP (fci->pc, name))
{
- fci->saved_regs = (struct frame_saved_regs*)
- obstack_alloc (&frame_cache_obstack,
- sizeof (struct frame_saved_regs));
- *fci->saved_regs = temp_saved_regs;
- fci->saved_regs->regs[PC_REGNUM]
- = fci->saved_regs->regs[RA_REGNUM];
+ fci->saved_regs = (CORE_ADDR*)
+ frame_obstack_alloc (SIZEOF_FRAME_SAVED_REGS);
+ memcpy (fci->saved_regs, temp_saved_regs.regs, SIZEOF_FRAME_SAVED_REGS);
+ fci->saved_regs[PC_REGNUM]
+ = fci->saved_regs[RA_REGNUM];
}
}
/* hack: if argument regs are saved, guess these contain args */
- if ((PROC_REG_MASK(proc_desc) & 0xF0) == 0) fci->num_args = -1;
- else if ((PROC_REG_MASK(proc_desc) & 0x80) == 0) fci->num_args = 4;
- else if ((PROC_REG_MASK(proc_desc) & 0x40) == 0) fci->num_args = 3;
- else if ((PROC_REG_MASK(proc_desc) & 0x20) == 0) fci->num_args = 2;
- else if ((PROC_REG_MASK(proc_desc) & 0x10) == 0) fci->num_args = 1;
+ fci->num_args = -1; /* assume we can't tell how many args for now */
+ for (regnum = MIPS_LAST_ARG_REGNUM; regnum >= A0_REGNUM; regnum--)
+ {
+ if (PROC_REG_MASK(proc_desc) & (1 << regnum))
+ {
+ fci->num_args = regnum - A0_REGNUM + 1;
+ break;
+ }
+ }
}
}
return create_new_frame (argv[0], argv[1]);
}
+/*
+ * STACK_ARGSIZE -- how many bytes does a pushed function arg take up on the stack?
+ *
+ * For n32 ABI, eight.
+ * For all others, he same as the size of a general register.
+ */
+#if defined (_MIPS_SIM_NABI32) && _MIPS_SIM == _MIPS_SIM_NABI32
+#define MIPS_NABI32 1
+#define STACK_ARGSIZE 8
+#else
+#define MIPS_NABI32 0
+#define STACK_ARGSIZE MIPS_REGSIZE
+#endif
CORE_ADDR
mips_push_arguments(nargs, args, sp, struct_return, struct_addr)
- int nargs;
- value_ptr *args;
- CORE_ADDR sp;
- int struct_return;
- CORE_ADDR struct_addr;
-{
- register i;
- int accumulate_size = struct_return ? MIPS_REGSIZE : 0;
- struct mips_arg { char *contents; int len; int offset; };
- struct mips_arg *mips_args =
- (struct mips_arg*)alloca((nargs + 4) * sizeof(struct mips_arg));
- register struct mips_arg *m_arg;
- int fake_args = 0;
-
- for (i = 0, m_arg = mips_args; i < nargs; i++, m_arg++) {
- value_ptr arg = args[i];
- m_arg->len = TYPE_LENGTH (VALUE_TYPE (arg));
- /* This entire mips-specific routine is because doubles must be aligned
- * on 8-byte boundaries. It still isn't quite right, because MIPS decided
- * to align 'struct {int a, b}' on 4-byte boundaries (even though this
- * breaks their varargs implementation...). A correct solution
- * requires an simulation of gcc's 'alignof' (and use of 'alignof'
- * in stdarg.h/varargs.h).
- * On the 64 bit r4000 we always pass the first four arguments
- * using eight bytes each, so that we can load them up correctly
- * in CALL_DUMMY.
- */
- if (m_arg->len > 4)
- accumulate_size = (accumulate_size + 7) & -8;
- m_arg->offset = accumulate_size;
- m_arg->contents = VALUE_CONTENTS(arg);
- if (! GDB_TARGET_IS_MIPS64)
- accumulate_size = (accumulate_size + m_arg->len + 3) & -4;
- else
- {
- if (accumulate_size >= 4 * MIPS_REGSIZE)
- accumulate_size = (accumulate_size + m_arg->len + 3) &~ 4;
- else
- {
- static char zeroes[8] = { 0 };
- int len = m_arg->len;
-
- if (len < 8)
- {
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- m_arg->offset += 8 - len;
- ++m_arg;
- m_arg->len = 8 - len;
- m_arg->contents = zeroes;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- m_arg->offset = accumulate_size;
- else
- m_arg->offset = accumulate_size + len;
- ++fake_args;
- }
- accumulate_size = (accumulate_size + len + 7) & ~8;
- }
- }
- }
- accumulate_size = (accumulate_size + 7) & (-8);
- if (accumulate_size < 4 * MIPS_REGSIZE)
- accumulate_size = 4 * MIPS_REGSIZE;
- sp -= accumulate_size;
- for (i = nargs + fake_args; m_arg--, --i >= 0; )
- write_memory(sp + m_arg->offset, m_arg->contents, m_arg->len);
+ int nargs;
+ value_ptr *args;
+ CORE_ADDR sp;
+ int struct_return;
+ CORE_ADDR struct_addr;
+{
+ int argreg;
+ int float_argreg;
+ int argnum;
+ int len = 0;
+ int stack_offset = 0;
+
+ /* Macros to round N up or down to the next A boundary; A must be
+ a power of two. */
+#define ROUND_DOWN(n,a) ((n) & ~((a)-1))
+#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1))
+
+ /* First ensure that the stack and structure return address (if any)
+ are properly aligned. The stack has to be at least 64-bit aligned
+ even on 32-bit machines, because doubles must be 64-bit aligned.
+ On at least one MIPS variant, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
+ sp = ROUND_DOWN (sp, 16);
+ struct_addr = ROUND_DOWN (struct_addr, MIPS_REGSIZE);
+
+ /* Now make space on the stack for the args. We allocate more
+ than necessary for EABI, because the first few arguments are
+ passed in registers, but that's OK. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ len += ROUND_UP (TYPE_LENGTH(VALUE_TYPE(args[argnum])), MIPS_REGSIZE);
+ sp -= ROUND_UP (len, 16);
+
+ /* Initialize the integer and float register pointers. */
+ argreg = A0_REGNUM;
+ float_argreg = FPA0_REGNUM;
+
+ /* the struct_return pointer occupies the first parameter-passing reg */
if (struct_return)
+ write_register (argreg++, struct_addr);
+
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. Loop thru args
+ from first to last. */
+ for (argnum = 0; argnum < nargs; argnum++)
{
- char buf[TARGET_PTR_BIT / HOST_CHAR_BIT];
+ char *val;
+ char valbuf[MAX_REGISTER_RAW_SIZE];
+ value_ptr arg = args[argnum];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ int len = TYPE_LENGTH (arg_type);
+ enum type_code typecode = TYPE_CODE (arg_type);
+
+ /* The EABI passes structures that do not fit in a register by
+ reference. In all other cases, pass the structure by value. */
+ if (MIPS_EABI && len > MIPS_REGSIZE &&
+ (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
+ {
+ store_address (valbuf, MIPS_REGSIZE, VALUE_ADDRESS (arg));
+ typecode = TYPE_CODE_PTR;
+ len = MIPS_REGSIZE;
+ val = valbuf;
+ }
+ else
+ val = (char *)VALUE_CONTENTS (arg);
+
+ /* 32-bit ABIs always start floating point arguments in an
+ even-numbered floating point register. */
+ if (!FP_REGISTER_DOUBLE && typecode == TYPE_CODE_FLT
+ && (float_argreg & 1))
+ float_argreg++;
+
+ /* Floating point arguments passed in registers have to be
+ treated specially. On 32-bit architectures, doubles
+ are passed in register pairs; the even register gets
+ the low word, and the odd register gets the high word.
+ On non-EABI processors, the first two floating point arguments are
+ also copied to general registers, because MIPS16 functions
+ don't use float registers for arguments. This duplication of
+ arguments in general registers can't hurt non-MIPS16 functions
+ because those registers are normally skipped. */
+ if (typecode == TYPE_CODE_FLT
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM
+ && MIPS_FPU_TYPE != MIPS_FPU_NONE)
+ {
+ if (!FP_REGISTER_DOUBLE && len == 8)
+ {
+ int low_offset = TARGET_BYTE_ORDER == BIG_ENDIAN ? 4 : 0;
+ unsigned long regval;
+
+ /* Write the low word of the double to the even register(s). */
+ regval = extract_unsigned_integer (val+low_offset, 4);
+ write_register (float_argreg++, regval);
+ if (!MIPS_EABI)
+ write_register (argreg+1, regval);
+
+ /* Write the high word of the double to the odd register(s). */
+ regval = extract_unsigned_integer (val+4-low_offset, 4);
+ write_register (float_argreg++, regval);
+ if (!MIPS_EABI)
+ {
+ write_register (argreg, regval);
+ argreg += 2;
+ }
- store_address (buf, sizeof buf, struct_addr);
- write_memory (sp, buf, sizeof buf);
+ }
+ else
+ {
+ /* This is a floating point value that fits entirely
+ in a single register. */
+ CORE_ADDR regval = extract_address (val, len);
+ write_register (float_argreg++, regval);
+ if (!MIPS_EABI)
+ {
+ write_register (argreg, regval);
+ argreg += FP_REGISTER_DOUBLE ? 1 : 2;
+ }
+ }
+ }
+ else
+ {
+ /* Copy the argument to general registers or the stack in
+ register-sized pieces. Large arguments are split between
+ registers and stack. */
+ /* Note: structs whose size is not a multiple of MIPS_REGSIZE
+ are treated specially: Irix cc passes them in registers
+ where gcc sometimes puts them on the stack. For maximum
+ compatibility, we will put them in both places. */
+
+ int odd_sized_struct = ((len > MIPS_REGSIZE) &&
+ (len % MIPS_REGSIZE != 0));
+ while (len > 0)
+ {
+ int partial_len = len < MIPS_REGSIZE ? len : MIPS_REGSIZE;
+
+ if (argreg > MIPS_LAST_ARG_REGNUM || odd_sized_struct)
+ {
+ /* Write this portion of the argument to the stack. */
+ /* Should shorter than int integer values be
+ promoted to int before being stored? */
+
+ int longword_offset = 0;
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (STACK_ARGSIZE == 8 &&
+ (typecode == TYPE_CODE_INT ||
+ typecode == TYPE_CODE_PTR ||
+ typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = STACK_ARGSIZE - len;
+ else if ((typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION) &&
+ TYPE_LENGTH (arg_type) < STACK_ARGSIZE)
+ longword_offset = STACK_ARGSIZE - len;
+
+ write_memory (sp + stack_offset + longword_offset,
+ val, partial_len);
+ }
+
+ /* Note!!! This is NOT an else clause.
+ Odd sized structs may go thru BOTH paths. */
+ if (argreg <= MIPS_LAST_ARG_REGNUM)
+ {
+ CORE_ADDR regval = extract_address (val, partial_len);
+
+ /* A non-floating-point argument being passed in a
+ general register. If a struct or union, and if
+ the remaining length is smaller than the register
+ size, we have to adjust the register value on
+ big endian targets.
+
+ It does not seem to be necessary to do the
+ same for integral types.
+
+ Also don't do this adjustment on EABI and O64
+ binaries. */
+
+ if (!MIPS_EABI
+ && (MIPS_REGSIZE < 8)
+ && TARGET_BYTE_ORDER == BIG_ENDIAN
+ && (partial_len < MIPS_REGSIZE)
+ && (typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION))
+ regval <<= ((MIPS_REGSIZE - partial_len) *
+ TARGET_CHAR_BIT);
+
+ write_register (argreg, regval);
+ argreg++;
+
+ /* If this is the old ABI, prevent subsequent floating
+ point arguments from being passed in floating point
+ registers. */
+ if (!MIPS_EABI)
+ float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
+ }
+
+ len -= partial_len;
+ val += partial_len;
+
+ /* The offset onto the stack at which we will start
+ copying parameters (after the registers are used up)
+ begins at (4 * MIPS_REGSIZE) in the old ABI. This
+ leaves room for the "home" area for register parameters.
+
+ In the new EABI (and the NABI32), the 8 register parameters
+ do not have "home" stack space reserved for them, so the
+ stack offset does not get incremented until after
+ we have used up the 8 parameter registers. */
+
+ if (!(MIPS_EABI || MIPS_NABI32) ||
+ argnum >= 8)
+ stack_offset += ROUND_UP (partial_len, STACK_ARGSIZE);
+ }
+ }
}
+
+ /* Set the return address register to point to the entry
+ point of the program, where a breakpoint lies in wait. */
+ write_register (RA_REGNUM, CALL_DUMMY_ADDRESS());
+
+ /* Return adjusted stack pointer. */
return sp;
}
-/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<31. */
+static void
+mips_push_register(CORE_ADDR *sp, int regno)
+{
+ char buffer[MAX_REGISTER_RAW_SIZE];
+ int regsize = REGISTER_RAW_SIZE (regno);
+
+ *sp -= regsize;
+ read_register_gen (regno, buffer);
+ write_memory (*sp, buffer, regsize);
+}
+
+/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<(MIPS_NUMREGS-1). */
#define MASK(i,j) (((1 << ((j)+1))-1) ^ ((1 << (i))-1))
void
mips_push_dummy_frame()
{
- char buffer[MAX_REGISTER_RAW_SIZE];
int ireg;
struct linked_proc_info *link = (struct linked_proc_info*)
xmalloc(sizeof(struct linked_proc_info));
mips_extra_func_info_t proc_desc = &link->info;
- CORE_ADDR sp = read_register (SP_REGNUM);
- CORE_ADDR save_address;
+ CORE_ADDR sp = ADDR_BITS_REMOVE (read_register (SP_REGNUM));
+ CORE_ADDR old_sp = sp;
link->next = linked_proc_desc_table;
linked_proc_desc_table = link;
+
+/* FIXME! are these correct ? */
#define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */
-#define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<31)
-#define GEN_REG_SAVE_COUNT 22
+#define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<(MIPS_NUMREGS-1))
#define FLOAT_REG_SAVE_MASK MASK(0,19)
-#define FLOAT_REG_SAVE_COUNT 20
#define FLOAT_SINGLE_REG_SAVE_MASK \
((1<<18)|(1<<16)|(1<<14)|(1<<12)|(1<<10)|(1<<8)|(1<<6)|(1<<4)|(1<<2)|(1<<0))
-#define FLOAT_SINGLE_REG_SAVE_COUNT 10
-#define SPECIAL_REG_SAVE_COUNT 4
/*
* The registers we must save are all those not preserved across
* procedure calls. Dest_Reg (see tm-mips.h) must also be saved.
- * In addition, we must save the PC, and PUSH_FP_REGNUM.
- * (Ideally, we should also save MDLO/-HI and FP Control/Status reg.)
+ * In addition, we must save the PC, PUSH_FP_REGNUM, MMLO/-HI
+ * and FP Control/Status registers.
+ *
*
* Dummy frame layout:
* (high memory)
* Saved D18 (i.e. F19, F18)
* ...
* Saved D0 (i.e. F1, F0)
- * CALL_DUMMY (subroutine stub; see tm-mips.h)
- * Parameter build area (not yet implemented)
+ * Argument build area and stack arguments written via mips_push_arguments
* (low memory)
*/
+
+ /* Save special registers (PC, MMHI, MMLO, FPC_CSR) */
+ PROC_FRAME_REG(proc_desc) = PUSH_FP_REGNUM;
+ PROC_FRAME_OFFSET(proc_desc) = 0;
+ PROC_FRAME_ADJUST(proc_desc) = 0;
+ mips_push_register (&sp, PC_REGNUM);
+ mips_push_register (&sp, HI_REGNUM);
+ mips_push_register (&sp, LO_REGNUM);
+ mips_push_register (&sp, MIPS_FPU_TYPE == MIPS_FPU_NONE ? 0 : FCRCS_REGNUM);
+
+ /* Save general CPU registers */
PROC_REG_MASK(proc_desc) = GEN_REG_SAVE_MASK;
- switch (mips_fpu)
- {
- case MIPS_FPU_DOUBLE:
- PROC_FREG_MASK(proc_desc) = FLOAT_REG_SAVE_MASK;
- break;
- case MIPS_FPU_SINGLE:
- PROC_FREG_MASK(proc_desc) = FLOAT_SINGLE_REG_SAVE_MASK;
- break;
- case MIPS_FPU_NONE:
- PROC_FREG_MASK(proc_desc) = 0;
- break;
- }
- PROC_REG_OFFSET(proc_desc) = /* offset of (Saved R31) from FP */
- -sizeof(long) - 4 * SPECIAL_REG_SAVE_COUNT;
- PROC_FREG_OFFSET(proc_desc) = /* offset of (Saved D18) from FP */
- -sizeof(double) - 4 * (SPECIAL_REG_SAVE_COUNT + GEN_REG_SAVE_COUNT);
- /* save general registers */
- save_address = sp + PROC_REG_OFFSET(proc_desc);
+ /* PROC_REG_OFFSET is the offset of the first saved register from FP. */
+ PROC_REG_OFFSET(proc_desc) = sp - old_sp - MIPS_REGSIZE;
for (ireg = 32; --ireg >= 0; )
if (PROC_REG_MASK(proc_desc) & (1 << ireg))
- {
- read_register_gen (ireg, buffer);
-
- /* Need to fix the save_address decrement below, and also make sure
- that we don't run into problems with the size of the dummy frame
- or any of the offsets within it. */
- if (REGISTER_RAW_SIZE (ireg) > 4)
- error ("Cannot call functions on mips64");
-
- write_memory (save_address, buffer, REGISTER_RAW_SIZE (ireg));
- save_address -= 4;
- }
- /* save floating-points registers starting with high order word */
- save_address = sp + PROC_FREG_OFFSET(proc_desc) + 4;
+ mips_push_register (&sp, ireg);
+
+ /* Save floating point registers starting with high order word */
+ PROC_FREG_MASK(proc_desc) =
+ MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? FLOAT_REG_SAVE_MASK
+ : MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? FLOAT_SINGLE_REG_SAVE_MASK : 0;
+ /* PROC_FREG_OFFSET is the offset of the first saved *double* register
+ from FP. */
+ PROC_FREG_OFFSET(proc_desc) = sp - old_sp - 8;
for (ireg = 32; --ireg >= 0; )
if (PROC_FREG_MASK(proc_desc) & (1 << ireg))
- {
- read_register_gen (ireg + FP0_REGNUM, buffer);
-
- if (REGISTER_RAW_SIZE (ireg + FP0_REGNUM) > 4)
- error ("Cannot call functions on mips64");
+ mips_push_register (&sp, ireg + FP0_REGNUM);
- write_memory (save_address, buffer,
- REGISTER_RAW_SIZE (ireg + FP0_REGNUM));
- save_address -= 4;
- }
- write_register (PUSH_FP_REGNUM, sp);
- PROC_FRAME_REG(proc_desc) = PUSH_FP_REGNUM;
- PROC_FRAME_OFFSET(proc_desc) = 0;
- read_register_gen (PC_REGNUM, buffer);
- write_memory (sp - 4, buffer, REGISTER_RAW_SIZE (PC_REGNUM));
- read_register_gen (HI_REGNUM, buffer);
- write_memory (sp - 8, buffer, REGISTER_RAW_SIZE (HI_REGNUM));
- read_register_gen (LO_REGNUM, buffer);
- write_memory (sp - 12, buffer, REGISTER_RAW_SIZE (LO_REGNUM));
- if (mips_fpu != MIPS_FPU_NONE)
- read_register_gen (FCRCS_REGNUM, buffer);
- else
- memset (buffer, 0, REGISTER_RAW_SIZE (FCRCS_REGNUM));
- write_memory (sp - 16, buffer, REGISTER_RAW_SIZE (FCRCS_REGNUM));
- sp -= 4 * (GEN_REG_SAVE_COUNT + SPECIAL_REG_SAVE_COUNT);
- if (mips_fpu == MIPS_FPU_DOUBLE)
- sp -= 4 * FLOAT_REG_SAVE_COUNT;
- else if (mips_fpu == MIPS_FPU_SINGLE)
- sp -= 4 * FLOAT_SINGLE_REG_SAVE_COUNT;
+ /* Update the frame pointer for the call dummy and the stack pointer.
+ Set the procedure's starting and ending addresses to point to the
+ call dummy address at the entry point. */
+ write_register (PUSH_FP_REGNUM, old_sp);
write_register (SP_REGNUM, sp);
- PROC_LOW_ADDR(proc_desc) = sp - CALL_DUMMY_SIZE + CALL_DUMMY_START_OFFSET;
- PROC_HIGH_ADDR(proc_desc) = sp;
+ PROC_LOW_ADDR(proc_desc) = CALL_DUMMY_ADDRESS();
+ PROC_HIGH_ADDR(proc_desc) = CALL_DUMMY_ADDRESS() + 4;
SET_PROC_DESC_IS_DUMMY(proc_desc);
PROC_PC_REG(proc_desc) = RA_REGNUM;
}
write_register (PC_REGNUM, FRAME_SAVED_PC(frame));
if (frame->saved_regs == NULL)
mips_find_saved_regs (frame);
- if (proc_desc)
+ for (regnum = 0; regnum < NUM_REGS; regnum++)
{
- for (regnum = 32; --regnum >= 0; )
- if (PROC_REG_MASK(proc_desc) & (1 << regnum))
- write_register (regnum,
- read_memory_integer (frame->saved_regs->regs[regnum],
- 4));
- for (regnum = 32; --regnum >= 0; )
- if (PROC_FREG_MASK(proc_desc) & (1 << regnum))
- write_register (regnum + FP0_REGNUM,
- read_memory_integer (frame->saved_regs->regs[regnum + FP0_REGNUM], 4));
+ if (regnum != SP_REGNUM && regnum != PC_REGNUM
+ && frame->saved_regs[regnum])
+ write_register (regnum,
+ read_memory_integer (frame->saved_regs[regnum],
+ MIPS_REGSIZE));
}
write_register (SP_REGNUM, new_sp);
flush_cached_frames ();
free (pi_ptr);
- write_register (HI_REGNUM, read_memory_integer(new_sp - 8, 4));
- write_register (LO_REGNUM, read_memory_integer(new_sp - 12, 4));
- if (mips_fpu != MIPS_FPU_NONE)
- write_register (FCRCS_REGNUM, read_memory_integer(new_sp - 16, 4));
+ write_register (HI_REGNUM,
+ read_memory_integer (new_sp - 2*MIPS_REGSIZE, MIPS_REGSIZE));
+ write_register (LO_REGNUM,
+ read_memory_integer (new_sp - 3*MIPS_REGSIZE, MIPS_REGSIZE));
+ if (MIPS_FPU_TYPE != MIPS_FPU_NONE)
+ write_register (FCRCS_REGNUM,
+ read_memory_integer (new_sp - 4*MIPS_REGSIZE, MIPS_REGSIZE));
}
}
/* Get the data in raw format. */
if (read_relative_register_raw_bytes (regnum, raw_buffer))
{
- printf_filtered ("%s: [Invalid]", reg_names[regnum]);
+ printf_filtered ("%s: [Invalid]", REGISTER_NAME (regnum));
return;
}
- /* If an even floating pointer register, also print as double. */
- if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM+32
+ /* If an even floating point register, also print as double. */
+ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT
&& !((regnum-FP0_REGNUM) & 1))
- {
- char dbuffer[MAX_REGISTER_RAW_SIZE];
+ if (REGISTER_RAW_SIZE(regnum) == 4) /* this would be silly on MIPS64 or N32 (Irix 6) */
+ {
+ char dbuffer[2 * MAX_REGISTER_RAW_SIZE];
- read_relative_register_raw_bytes (regnum, dbuffer);
- read_relative_register_raw_bytes (regnum+1, dbuffer+4);
-#ifdef REGISTER_CONVERT_TO_TYPE
- REGISTER_CONVERT_TO_TYPE(regnum, builtin_type_double, dbuffer);
-#endif
- printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
- val_print (builtin_type_double, dbuffer, 0,
- gdb_stdout, 0, 1, 0, Val_pretty_default);
- printf_filtered ("); ");
- }
- fputs_filtered (reg_names[regnum], gdb_stdout);
+ read_relative_register_raw_bytes (regnum, dbuffer);
+ read_relative_register_raw_bytes (regnum+1, dbuffer+MIPS_REGSIZE);
+ REGISTER_CONVERT_TO_TYPE (regnum, builtin_type_double, dbuffer);
+
+ printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
+ val_print (builtin_type_double, dbuffer, 0, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
+ printf_filtered ("); ");
+ }
+ fputs_filtered (REGISTER_NAME (regnum), gdb_stdout);
/* The problem with printing numeric register names (r26, etc.) is that
the user can't use them on input. Probably the best solution is to
fix it so that either the numeric or the funky (a2, etc.) names
are accepted on input. */
- if (regnum < 32)
+ if (regnum < MIPS_NUMREGS)
printf_filtered ("(r%d): ", regnum);
else
printf_filtered (": ");
/* If virtual format is floating, print it that way. */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0,
- gdb_stdout, 0, 1, 0, Val_pretty_default);
+ if (FP_REGISTER_DOUBLE)
+ { /* show 8-byte floats as float AND double: */
+ int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
+
+ printf_filtered (" (float) ");
+ val_print (builtin_type_float, raw_buffer + offset, 0, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
+ printf_filtered (", (double) ");
+ val_print (builtin_type_double, raw_buffer, 0, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
+ }
+ else
+ val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
/* Else print as integer in hex. */
else
print_scalar_formatted (raw_buffer, REGISTER_VIRTUAL_TYPE (regnum),
'x', 0, gdb_stdout);
}
-/* Replacement for generic do_registers_info. */
+/* Replacement for generic do_registers_info.
+ Print regs in pretty columns. */
+
+static int
+do_fp_register_row (regnum)
+ int regnum;
+{ /* do values for FP (float) regs */
+ char *raw_buffer[2];
+ char *dbl_buffer;
+ /* use HI and LO to control the order of combining two flt regs */
+ int HI = (TARGET_BYTE_ORDER == BIG_ENDIAN);
+ int LO = (TARGET_BYTE_ORDER != BIG_ENDIAN);
+ double doub, flt1, flt2; /* doubles extracted from raw hex data */
+ int inv1, inv2, inv3;
+
+ raw_buffer[0] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
+ raw_buffer[1] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
+ dbl_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+
+ /* Get the data in raw format. */
+ if (read_relative_register_raw_bytes (regnum, raw_buffer[HI]))
+ error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+ if (REGISTER_RAW_SIZE(regnum) == 4)
+ {
+ /* 4-byte registers: we can fit two registers per row. */
+ /* Also print every pair of 4-byte regs as an 8-byte double. */
+ if (read_relative_register_raw_bytes (regnum + 1, raw_buffer[LO]))
+ error ("can't read register %d (%s)",
+ regnum + 1, REGISTER_NAME (regnum + 1));
+
+ /* copy the two floats into one double, and unpack both */
+ memcpy (dbl_buffer, raw_buffer, sizeof(dbl_buffer));
+ flt1 = unpack_double (builtin_type_float, raw_buffer[HI], &inv1);
+ flt2 = unpack_double (builtin_type_float, raw_buffer[LO], &inv2);
+ doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
+
+ printf_filtered (inv1 ? " %-5s: <invalid float>" :
+ " %-5s%-17.9g", REGISTER_NAME (regnum), flt1);
+ printf_filtered (inv2 ? " %-5s: <invalid float>" :
+ " %-5s%-17.9g", REGISTER_NAME (regnum + 1), flt2);
+ printf_filtered (inv3 ? " dbl: <invalid double>\n" :
+ " dbl: %-24.17g\n", doub);
+ /* may want to do hex display here (future enhancement) */
+ regnum +=2;
+ }
+ else
+ { /* eight byte registers: print each one as float AND as double. */
+ int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
+
+ memcpy (dbl_buffer, raw_buffer[HI], sizeof(dbl_buffer));
+ flt1 = unpack_double (builtin_type_float,
+ &raw_buffer[HI][offset], &inv1);
+ doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
+
+ printf_filtered (inv1 ? " %-5s: <invalid float>" :
+ " %-5s flt: %-17.9g", REGISTER_NAME (regnum), flt1);
+ printf_filtered (inv3 ? " dbl: <invalid double>\n" :
+ " dbl: %-24.17g\n", doub);
+ /* may want to do hex display here (future enhancement) */
+ regnum++;
+ }
+ return regnum;
+}
+
+/* Print a row's worth of GP (int) registers, with name labels above */
+
+static int
+do_gp_register_row (regnum)
+ int regnum;
+{
+ /* do values for GP (int) regs */
+ char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ int ncols = (MIPS_REGSIZE == 8 ? 4 : 8); /* display cols per row */
+ int col, byte;
+ int start_regnum = regnum;
+ int numregs = NUM_REGS;
+
+/* start-sanitize-sky */
+#ifdef NUM_CORE_REGS
+ numregs = NUM_CORE_REGS;
+#endif
+/* end-sanitize-sky */
+
+ /* For GP registers, we print a separate row of names above the vals */
+ printf_filtered (" ");
+ for (col = 0; col < ncols && regnum < numregs; regnum++)
+ {
+ if (*REGISTER_NAME (regnum) == '\0')
+ continue; /* unused register */
+ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+ break; /* end the row: reached FP register */
+ printf_filtered (MIPS_REGSIZE == 8 ? "%17s" : "%9s",
+ REGISTER_NAME (regnum));
+ col++;
+ }
+ printf_filtered (start_regnum < MIPS_NUMREGS ? "\n R%-4d" : "\n ",
+ start_regnum); /* print the R0 to R31 names */
+
+ regnum = start_regnum; /* go back to start of row */
+ /* now print the values in hex, 4 or 8 to the row */
+ for (col = 0; col < ncols && regnum < numregs; regnum++)
+ {
+ if (*REGISTER_NAME (regnum) == '\0')
+ continue; /* unused register */
+ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+ break; /* end row: reached FP register */
+ /* OK: get the data in raw format. */
+ if (read_relative_register_raw_bytes (regnum, raw_buffer))
+ error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+ /* pad small registers */
+ for (byte = 0; byte < (MIPS_REGSIZE - REGISTER_RAW_SIZE (regnum)); byte++)
+ printf_filtered (" ");
+ /* Now print the register value in hex, endian order. */
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ for (byte = 0; byte < REGISTER_RAW_SIZE (regnum); byte++)
+ printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
+ else
+ for (byte = REGISTER_RAW_SIZE (regnum) - 1; byte >= 0; byte--)
+ printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
+ printf_filtered (" ");
+ col++;
+ }
+ if (col > 0) /* ie. if we actually printed anything... */
+ printf_filtered ("\n");
+
+ return regnum;
+}
+
+/* MIPS_DO_REGISTERS_INFO(): called by "info register" command */
void
mips_do_registers_info (regnum, fpregs)
int regnum;
int fpregs;
{
- if (regnum != -1)
+ if (regnum != -1) /* do one specified register */
{
- if (*(reg_names[regnum]) == '\0')
+ if (*(REGISTER_NAME (regnum)) == '\0')
error ("Not a valid register for the current processor type");
mips_print_register (regnum, 0);
printf_filtered ("\n");
}
- else
+ else /* do all (or most) registers */
{
- int did_newline = 0;
-
- for (regnum = 0; regnum < NUM_REGS; )
+ regnum = 0;
+ while (regnum < NUM_REGS)
{
- if (((!fpregs) && regnum >= FP0_REGNUM && regnum <= FCRIR_REGNUM)
- || *(reg_names[regnum]) == '\0')
- {
- regnum++;
- continue;
- }
- mips_print_register (regnum, 1);
- regnum++;
- printf_filtered ("; ");
- did_newline = 0;
- if ((regnum & 3) == 0)
- {
- printf_filtered ("\n");
- did_newline = 1;
- }
+ if (TYPE_CODE(REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+ if (fpregs) /* true for "INFO ALL-REGISTERS" command */
+ regnum = do_fp_register_row (regnum); /* FP regs */
+ else
+ regnum += MIPS_NUMREGS; /* skip floating point regs */
+ else
+ regnum = do_gp_register_row (regnum); /* GP (int) regs */
+/* start-sanitize-sky */
+#ifdef NUM_CORE_REGS
+ /* For the sky project, NUM_REGS includes the vector slaves,
+ which are handled elsewhere */
+ if (regnum >= NUM_CORE_REGS)
+ break;
+#endif
+/* end-sanitize-sky */
}
- if (!did_newline)
- printf_filtered ("\n");
}
}
#endif
return -1;
}
-\f
+
/* Is this a branch with a delay slot? */
static int is_delayed PARAMS ((unsigned long));
mips_step_skips_delay (pc)
CORE_ADDR pc;
{
- char buf[4];
+ char buf[MIPS_INSTLEN];
+
+ /* There is no branch delay slot on MIPS16. */
+ if (pc_is_mips16 (pc))
+ return 0;
- if (target_read_memory (pc, buf, 4) != 0)
+ if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0)
/* If error reading memory, guess that it is not a delayed branch. */
return 0;
- return is_delayed (extract_unsigned_integer (buf, 4));
+ return is_delayed ((unsigned long)extract_unsigned_integer (buf, MIPS_INSTLEN));
}
-/* To skip prologues, I use this predicate. Returns either PC itself
- if the code at PC does not look like a function prologue; otherwise
- returns an address that (if we're lucky) follows the prologue. If
- LENIENT, then we must skip everything which is involved in setting
- up the frame (it's OK to skip more, just so long as we don't skip
- anything which might clobber the registers which are being saved.
- We must skip more in the case where part of the prologue is in the
- delay slot of a non-prologue instruction). */
-CORE_ADDR
-mips_skip_prologue (pc, lenient)
- CORE_ADDR pc;
+/* Skip the PC past function prologue instructions (32-bit version).
+ This is a helper function for mips_skip_prologue. */
+
+static CORE_ADDR
+mips32_skip_prologue (pc, lenient)
+ CORE_ADDR pc; /* starting PC to search from */
int lenient;
{
- unsigned long inst;
- int offset;
+ t_inst inst;
+ CORE_ADDR end_pc;
int seen_sp_adjust = 0;
int load_immediate_bytes = 0;
- CORE_ADDR post_prologue_pc;
-
- /* See if we can determine the end of the prologue via the symbol table.
- If so, then return either PC, or the PC after the prologue, whichever
- is greater. */
-
- post_prologue_pc = after_prologue (pc, NULL);
-
- if (post_prologue_pc != 0)
- return max (pc, post_prologue_pc);
-
- /* Can't determine prologue from the symbol table, need to examine
- instructions. */
/* Skip the typical prologue instructions. These are the stack adjustment
instruction and the instructions that save registers on the stack
or in the gcc frame. */
- for (offset = 0; offset < 100; offset += 4)
+ for (end_pc = pc + 100; pc < end_pc; pc += MIPS_INSTLEN)
{
- char buf[4];
- int status;
+ unsigned long high_word;
- status = read_memory_nobpt (pc + offset, buf, 4);
- if (status)
- memory_error (status, pc + offset);
- inst = extract_unsigned_integer (buf, 4);
+ inst = mips_fetch_instruction (pc);
+ high_word = (inst >> 16) & 0xffff;
#if 0
if (lenient && is_delayed (inst))
continue;
#endif
- if ((inst & 0xffff0000) == 0x27bd0000) /* addiu $sp,$sp,offset */
+ if (high_word == 0x27bd /* addiu $sp,$sp,offset */
+ || high_word == 0x67bd) /* daddiu $sp,$sp,offset */
seen_sp_adjust = 1;
else if (inst == 0x03a1e823 || /* subu $sp,$sp,$at */
inst == 0x03a8e823) /* subu $sp,$sp,$t0 */
seen_sp_adjust = 1;
- else if ((inst & 0xFFE00000) == 0xAFA00000 && (inst & 0x001F0000))
- continue; /* sw reg,n($sp) */
- /* reg != $zero */
+ else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */
+ /* start-sanitize-r5900 */
+ || (inst & 0xFFE00000) == 0x7FA00000 /* sq reg,n($sp) */
+ /* end-sanitize-r5900 */
+ || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */
+ && (inst & 0x001F0000)) /* reg != $zero */
+ continue;
+
else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */
continue;
else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000))
continue; /* reg != $zero */
/* move $s8,$sp. With different versions of gas this will be either
- `addu $s8,$sp,$zero' or `or $s8,$sp,$zero'. Accept either. */
- else if (inst == 0x03A0F021 || inst == 0x03a0f025)
+ `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'.
+ Accept any one of these. */
+ else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
continue;
else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */
continue;
- else if ((inst & 0xffff0000) == 0x3c1c0000) /* lui $gp,n */
+ else if (high_word == 0x3c1c) /* lui $gp,n */
continue;
- else if ((inst & 0xffff0000) == 0x279c0000) /* addiu $gp,$gp,n */
+ else if (high_word == 0x279c) /* addiu $gp,$gp,n */
continue;
else if (inst == 0x0399e021 /* addu $gp,$gp,$t9 */
|| inst == 0x033ce021) /* addu $gp,$t9,$gp */
instruction was seen. */
else if (!seen_sp_adjust)
{
- if ((inst & 0xffff0000) == 0x3c010000 || /* lui $at,n */
- (inst & 0xffff0000) == 0x3c080000) /* lui $t0,n */
+ if (high_word == 0x3c01 || /* lui $at,n */
+ high_word == 0x3c08) /* lui $t0,n */
{
- load_immediate_bytes += 4;
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
continue;
}
- else if ((inst & 0xffff0000) == 0x34210000 || /* ori $at,$at,n */
- (inst & 0xffff0000) == 0x35080000 || /* ori $t0,$t0,n */
- (inst & 0xffff0000) == 0x34010000 || /* ori $at,$zero,n */
- (inst & 0xffff0000) == 0x34080000) /* ori $t0,$zero,n */
+ else if (high_word == 0x3421 || /* ori $at,$at,n */
+ high_word == 0x3508 || /* ori $t0,$t0,n */
+ high_word == 0x3401 || /* ori $at,$zero,n */
+ high_word == 0x3408) /* ori $t0,$zero,n */
{
- load_immediate_bytes += 4;
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
continue;
}
else
skipped some load immediate instructions. Undo the skipping
if the load immediate was not followed by a stack adjustment. */
if (load_immediate_bytes && !seen_sp_adjust)
- offset -= load_immediate_bytes;
- return pc + offset;
+ pc -= load_immediate_bytes;
+ return pc;
+}
+
+/* Skip the PC past function prologue instructions (16-bit version).
+ This is a helper function for mips_skip_prologue. */
+
+static CORE_ADDR
+mips16_skip_prologue (pc, lenient)
+ CORE_ADDR pc; /* starting PC to search from */
+ int lenient;
+{
+ CORE_ADDR end_pc;
+ int extend_bytes = 0;
+ int prev_extend_bytes;
+
+ /* Table of instructions likely to be found in a function prologue. */
+ static struct
+ {
+ unsigned short inst;
+ unsigned short mask;
+ } table[] =
+ {
+ { 0x6300, 0xff00 }, /* addiu $sp,offset */
+ { 0xfb00, 0xff00 }, /* daddiu $sp,offset */
+ { 0xd000, 0xf800 }, /* sw reg,n($sp) */
+ { 0xf900, 0xff00 }, /* sd reg,n($sp) */
+ { 0x6200, 0xff00 }, /* sw $ra,n($sp) */
+ { 0xfa00, 0xff00 }, /* sd $ra,n($sp) */
+ { 0x673d, 0xffff }, /* move $s1,sp */
+ { 0xd980, 0xff80 }, /* sw $a0-$a3,n($s1) */
+ { 0x6704, 0xff1c }, /* move reg,$a0-$a3 */
+ { 0xe809, 0xf81f }, /* entry pseudo-op */
+ { 0x0100, 0xff00 }, /* addiu $s1,$sp,n */
+ { 0, 0 } /* end of table marker */
+ };
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (end_pc = pc + 100; pc < end_pc; pc += MIPS16_INSTLEN)
+ {
+ unsigned short inst;
+ int i;
+
+ inst = mips_fetch_instruction (pc);
+
+ /* Normally we ignore an extend instruction. However, if it is
+ not followed by a valid prologue instruction, we must adjust
+ the pc back over the extend so that it won't be considered
+ part of the prologue. */
+ if ((inst & 0xf800) == 0xf000) /* extend */
+ {
+ extend_bytes = MIPS16_INSTLEN;
+ continue;
+ }
+ prev_extend_bytes = extend_bytes;
+ extend_bytes = 0;
+
+ /* Check for other valid prologue instructions besides extend. */
+ for (i = 0; table[i].mask != 0; i++)
+ if ((inst & table[i].mask) == table[i].inst) /* found, get out */
+ break;
+ if (table[i].mask != 0) /* it was in table? */
+ continue; /* ignore it */
+ else /* non-prologue */
+ {
+ /* Return the current pc, adjusted backwards by 2 if
+ the previous instruction was an extend. */
+ return pc - prev_extend_bytes;
+ }
+ }
+ return pc;
+}
+
+/* To skip prologues, I use this predicate. Returns either PC itself
+ if the code at PC does not look like a function prologue; otherwise
+ returns an address that (if we're lucky) follows the prologue. If
+ LENIENT, then we must skip everything which is involved in setting
+ up the frame (it's OK to skip more, just so long as we don't skip
+ anything which might clobber the registers which are being saved.
+ We must skip more in the case where part of the prologue is in the
+ delay slot of a non-prologue instruction). */
+
+CORE_ADDR
+mips_skip_prologue (pc, lenient)
+ CORE_ADDR pc;
+ int lenient;
+{
+ /* See if we can determine the end of the prologue via the symbol table.
+ If so, then return either PC, or the PC after the prologue, whichever
+ is greater. */
+
+ CORE_ADDR post_prologue_pc = after_prologue (pc, NULL);
+
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
+
+ /* Can't determine prologue from the symbol table, need to examine
+ instructions. */
+
+ if (pc_is_mips16 (pc))
+ return mips16_skip_prologue (pc, lenient);
+ else
+ return mips32_skip_prologue (pc, lenient);
}
#if 0
-/* The lenient prologue stuff should be superceded by the code in
+/* The lenient prologue stuff should be superseded by the code in
init_extra_frame_info which looks to see whether the stores mentioned
in the proc_desc have actually taken place. */
{
int regnum;
int offset = 0;
+ int len = TYPE_LENGTH (valtype);
regnum = 2;
if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && (mips_fpu == MIPS_FPU_DOUBLE
- || (mips_fpu == MIPS_FPU_SINGLE && TYPE_LENGTH (valtype) <= 4)))
+ && (MIPS_FPU_TYPE == MIPS_FPU_DOUBLE
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE
+ && len <= MIPS_FPU_SINGLE_REGSIZE)))
regnum = FP0_REGNUM;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN
- && TYPE_CODE (valtype) != TYPE_CODE_FLT
- && TYPE_LENGTH (valtype) < REGISTER_RAW_SIZE (regnum))
- offset = REGISTER_RAW_SIZE (regnum) - TYPE_LENGTH (valtype);
-
- memcpy (valbuf, regbuf + REGISTER_BYTE (regnum) + offset,
- TYPE_LENGTH (valtype));
-#ifdef REGISTER_CONVERT_TO_TYPE
- REGISTER_CONVERT_TO_TYPE(regnum, valtype, valbuf);
-#endif
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ { /* "un-left-justify" the value from the register */
+ if (len < REGISTER_RAW_SIZE (regnum))
+ offset = REGISTER_RAW_SIZE (regnum) - len;
+ if (len > REGISTER_RAW_SIZE (regnum) && /* odd-size structs */
+ len < REGISTER_RAW_SIZE (regnum) * 2 &&
+ (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+ TYPE_CODE (valtype) == TYPE_CODE_UNION))
+ offset = 2 * REGISTER_RAW_SIZE (regnum) - len;
+ }
+ memcpy (valbuf, regbuf + REGISTER_BYTE (regnum) + offset, len);
+ REGISTER_CONVERT_TO_TYPE (regnum, valtype, valbuf);
}
/* Given a return value in `regbuf' with a type `valtype',
char *valbuf;
{
int regnum;
+ int offset = 0;
+ int len = TYPE_LENGTH (valtype);
char raw_buffer[MAX_REGISTER_RAW_SIZE];
regnum = 2;
if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && (mips_fpu == MIPS_FPU_DOUBLE
- || (mips_fpu == MIPS_FPU_SINGLE && TYPE_LENGTH (valtype) <= 4)))
+ && (MIPS_FPU_TYPE == MIPS_FPU_DOUBLE
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE
+ && len <= MIPS_REGSIZE)))
regnum = FP0_REGNUM;
- memcpy(raw_buffer, valbuf, TYPE_LENGTH (valtype));
-
-#ifdef REGISTER_CONVERT_FROM_TYPE
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ { /* "left-justify" the value in the register */
+ if (len < REGISTER_RAW_SIZE (regnum))
+ offset = REGISTER_RAW_SIZE (regnum) - len;
+ if (len > REGISTER_RAW_SIZE (regnum) && /* odd-size structs */
+ len < REGISTER_RAW_SIZE (regnum) * 2 &&
+ (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+ TYPE_CODE (valtype) == TYPE_CODE_UNION))
+ offset = 2 * REGISTER_RAW_SIZE (regnum) - len;
+ }
+ memcpy(raw_buffer + offset, valbuf, len);
REGISTER_CONVERT_FROM_TYPE(regnum, valtype, raw_buffer);
-#endif
-
- write_register_bytes(REGISTER_BYTE (regnum), raw_buffer, TYPE_LENGTH (valtype));
+ write_register_bytes(REGISTER_BYTE (regnum), raw_buffer,
+ len > REGISTER_RAW_SIZE (regnum) ?
+ len : REGISTER_RAW_SIZE (regnum));
}
/* Exported procedure: Is PC in the signal trampoline code */
return (pc >= sigtramp_address && pc < sigtramp_end);
}
-/* Command to set FPU type. mips_fpu_string will have been set to the
- user's argument. Set mips_fpu based on mips_fpu_string, and then
- canonicalize mips_fpu_string. */
+/* Commands to show/set the MIPS FPU type. */
-/*ARGSUSED*/
+static void show_mipsfpu_command PARAMS ((char *, int));
static void
-mips_set_fpu_command (args, from_tty, c)
+show_mipsfpu_command (args, from_tty)
char *args;
int from_tty;
- struct cmd_list_element *c;
{
- char *err = NULL;
-
- if (mips_fpu_string == NULL || *mips_fpu_string == '\0')
- mips_fpu = MIPS_FPU_DOUBLE;
- else if (strcasecmp (mips_fpu_string, "double") == 0
- || strcasecmp (mips_fpu_string, "on") == 0
- || strcasecmp (mips_fpu_string, "1") == 0
- || strcasecmp (mips_fpu_string, "yes") == 0)
- mips_fpu = MIPS_FPU_DOUBLE;
- else if (strcasecmp (mips_fpu_string, "none") == 0
- || strcasecmp (mips_fpu_string, "off") == 0
- || strcasecmp (mips_fpu_string, "0") == 0
- || strcasecmp (mips_fpu_string, "no") == 0)
- mips_fpu = MIPS_FPU_NONE;
- else if (strcasecmp (mips_fpu_string, "single") == 0)
- mips_fpu = MIPS_FPU_SINGLE;
- else
- err = strsave (mips_fpu_string);
-
- if (mips_fpu_string != NULL)
- free (mips_fpu_string);
-
- switch (mips_fpu)
+ char *msg;
+ char *fpu;
+ switch (MIPS_FPU_TYPE)
{
- case MIPS_FPU_DOUBLE:
- mips_fpu_string = strsave ("double");
- break;
case MIPS_FPU_SINGLE:
- mips_fpu_string = strsave ("single");
+ fpu = "single-precision";
+ break;
+ case MIPS_FPU_DOUBLE:
+ fpu = "double-precision";
break;
case MIPS_FPU_NONE:
- mips_fpu_string = strsave ("none");
+ fpu = "absent (none)";
break;
}
+ if (mips_fpu_type_auto)
+ printf_unfiltered ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
+ fpu);
+ else
+ printf_unfiltered ("The MIPS floating-point coprocessor is assumed to be %s\n",
+ fpu);
+}
+
- if (err != NULL)
+static void set_mipsfpu_command PARAMS ((char *, int));
+static void
+set_mipsfpu_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
+ show_mipsfpu_command (args, from_tty);
+}
+
+static void set_mipsfpu_single_command PARAMS ((char *, int));
+static void
+set_mipsfpu_single_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ mips_fpu_type = MIPS_FPU_SINGLE;
+ mips_fpu_type_auto = 0;
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+ if (GDB_MULTI_ARCH)
{
- struct cleanup *cleanups = make_cleanup (free, err);
- error ("Unknown FPU type `%s'. Use `double', `none', or `single'.",
- err);
- do_cleanups (cleanups);
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_SINGLE;
}
+ /* end-sanitize-carp end-sanitize-vr4xxx */
}
+static void set_mipsfpu_double_command PARAMS ((char *, int));
static void
-mips_show_fpu_command (args, from_tty, c)
+set_mipsfpu_double_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ mips_fpu_type = MIPS_FPU_DOUBLE;
+ mips_fpu_type_auto = 0;
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+ if (GDB_MULTI_ARCH)
+ {
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_DOUBLE;
+ }
+ /* end-sanitize-carp end-sanitize-vr4xxx */
+}
+
+static void set_mipsfpu_none_command PARAMS ((char *, int));
+static void
+set_mipsfpu_none_command (args, from_tty)
char *args;
int from_tty;
- struct cmd_list_element *c;
{
+ mips_fpu_type = MIPS_FPU_NONE;
+ mips_fpu_type_auto = 0;
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+ if (GDB_MULTI_ARCH)
+ {
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_NONE;
+ }
+ /* end-sanitize-carp end-sanitize-vr4xxx */
+}
+
+static void set_mipsfpu_auto_command PARAMS ((char *, int));
+static void
+set_mipsfpu_auto_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ mips_fpu_type_auto = 1;
}
/* Command to set the processor type. */
mips_processor_type = str;
for (j = 0; j < NUM_REGS; ++j)
- reg_names[j] = mips_processor_type_table[i].regnames[j];
+ /* FIXME - MIPS should be defining REGISTER_NAME() instead */
+ gdb_register_names[j] = mips_processor_type_table[i].regnames[j];
return 1;
char *
mips_read_processor_type ()
{
- int prid;
+ CORE_ADDR prid;
prid = read_register (PRID_REGNUM);
- if (prid & ~0xf == 0x700)
+ if ((prid & ~0xf) == 0x700)
return savestring ("r3041", strlen("r3041"));
return NULL;
bfd_vma memaddr;
disassemble_info *info;
{
+ mips_extra_func_info_t proc_desc;
+
+ /* Search for the function containing this address. Set the low bit
+ of the address when searching, in case we were given an even address
+ that is the start of a 16-bit function. If we didn't do this,
+ the search would fail because the symbol table says the function
+ starts at an odd address, i.e. 1 byte past the given address. */
+ memaddr = ADDR_BITS_REMOVE (memaddr);
+ proc_desc = non_heuristic_proc_desc (MAKE_MIPS16_ADDR (memaddr), NULL);
+
+ /* Make an attempt to determine if this is a 16-bit function. If
+ the procedure descriptor exists and the address therein is odd,
+ it's definitely a 16-bit function. Otherwise, we have to just
+ guess that if the address passed in is odd, it's 16-bits. */
+ if (proc_desc)
+ info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ? 16 : TM_PRINT_INSN_MACH;
+ else
+ info->mach = pc_is_mips16 (memaddr) ? 16 : TM_PRINT_INSN_MACH;
+
+ /* Round down the instruction address to the appropriate boundary. */
+ memaddr &= (info->mach == 16 ? ~1 : ~3);
+
+ /* Call the appropriate disassembler based on the target endian-ness. */
if (TARGET_BYTE_ORDER == BIG_ENDIAN)
return print_insn_big_mips (memaddr, info);
else
return print_insn_little_mips (memaddr, info);
}
+/* Old-style breakpoint macros.
+ The IDT board uses an unusual breakpoint value, and sometimes gets
+ confused when it sees the usual MIPS breakpoint instruction. */
+
+#define BIG_BREAKPOINT {0, 0x5, 0, 0xd}
+#define LITTLE_BREAKPOINT {0xd, 0, 0x5, 0}
+#define PMON_BIG_BREAKPOINT {0, 0, 0, 0xd}
+#define PMON_LITTLE_BREAKPOINT {0xd, 0, 0, 0}
+#define IDT_BIG_BREAKPOINT {0, 0, 0x0a, 0xd}
+#define IDT_LITTLE_BREAKPOINT {0xd, 0x0a, 0, 0}
+#define MIPS16_BIG_BREAKPOINT {0xe8, 0xa5}
+#define MIPS16_LITTLE_BREAKPOINT {0xa5, 0xe8}
+
+/* This function implements the BREAKPOINT_FROM_PC macro. It uses the program
+ counter value to determine whether a 16- or 32-bit breakpoint should be
+ used. It returns a pointer to a string of bytes that encode a breakpoint
+ instruction, stores the length of the string to *lenptr, and adjusts pc
+ (if necessary) to point to the actual memory location where the
+ breakpoint should be inserted. */
+
+unsigned char *mips_breakpoint_from_pc (pcptr, lenptr)
+ CORE_ADDR *pcptr;
+ int *lenptr;
+{
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ {
+ if (pc_is_mips16 (*pcptr))
+ {
+ static char mips16_big_breakpoint[] = MIPS16_BIG_BREAKPOINT;
+ *pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
+ *lenptr = sizeof(mips16_big_breakpoint);
+ return mips16_big_breakpoint;
+ }
+ else
+ {
+ static char big_breakpoint[] = BIG_BREAKPOINT;
+ static char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
+ static char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
+
+ *lenptr = sizeof(big_breakpoint);
+
+ if (strcmp (target_shortname, "mips") == 0)
+ return idt_big_breakpoint;
+ else if (strcmp (target_shortname, "ddb") == 0
+ || strcmp (target_shortname, "pmon") == 0
+ || strcmp (target_shortname, "lsi") == 0)
+ return pmon_big_breakpoint;
+ else
+ return big_breakpoint;
+ }
+ }
+ else
+ {
+ if (pc_is_mips16 (*pcptr))
+ {
+ static char mips16_little_breakpoint[] = MIPS16_LITTLE_BREAKPOINT;
+ *pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
+ *lenptr = sizeof(mips16_little_breakpoint);
+ return mips16_little_breakpoint;
+ }
+ else
+ {
+ static char little_breakpoint[] = LITTLE_BREAKPOINT;
+ static char pmon_little_breakpoint[] = PMON_LITTLE_BREAKPOINT;
+ static char idt_little_breakpoint[] = IDT_LITTLE_BREAKPOINT;
+
+ *lenptr = sizeof(little_breakpoint);
+
+ if (strcmp (target_shortname, "mips") == 0)
+ return idt_little_breakpoint;
+ else if (strcmp (target_shortname, "ddb") == 0
+ || strcmp (target_shortname, "pmon") == 0
+ || strcmp (target_shortname, "lsi") == 0)
+ return pmon_little_breakpoint;
+ else
+ return little_breakpoint;
+ }
+ }
+}
+
+/* If PC is in a mips16 call or return stub, return the address of the target
+ PC, which is either the callee or the caller. There are several
+ cases which must be handled:
+
+ * If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
+ target PC is in $31 ($ra).
+ * If the PC is in __mips16_call_stub_{1..10}, this is a call stub
+ and the target PC is in $2.
+ * If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+ before the jal instruction, this is effectively a call stub
+ and the the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18.
+
+ See the source code for the stubs in gcc/config/mips/mips16.S for
+ gory details.
+
+ This function implements the SKIP_TRAMPOLINE_CODE macro.
+*/
+
+CORE_ADDR
+mips_skip_stub (pc)
+ CORE_ADDR pc;
+{
+ char *name;
+ CORE_ADDR start_addr;
+
+ /* Find the starting address and name of the function containing the PC. */
+ if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
+ target PC is in $31 ($ra). */
+ if (strcmp (name, "__mips16_ret_sf") == 0
+ || strcmp (name, "__mips16_ret_df") == 0)
+ return read_register (RA_REGNUM);
+
+ if (strncmp (name, "__mips16_call_stub_", 19) == 0)
+ {
+ /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
+ and the target PC is in $2. */
+ if (name[19] >= '0' && name[19] <= '9')
+ return read_register (2);
+
+ /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+ before the jal instruction, this is effectively a call stub
+ and the the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18. */
+ else if (name[19] == 's' || name[19] == 'd')
+ {
+ if (pc == start_addr)
+ {
+ /* Check if the target of the stub is a compiler-generated
+ stub. Such a stub for a function bar might have a name
+ like __fn_stub_bar, and might look like this:
+ mfc1 $4,$f13
+ mfc1 $5,$f12
+ mfc1 $6,$f15
+ mfc1 $7,$f14
+ la $1,bar (becomes a lui/addiu pair)
+ jr $1
+ So scan down to the lui/addi and extract the target
+ address from those two instructions. */
+
+ CORE_ADDR target_pc = read_register (2);
+ t_inst inst;
+ int i;
+
+ /* See if the name of the target function is __fn_stub_*. */
+ if (find_pc_partial_function (target_pc, &name, NULL, NULL) == 0)
+ return target_pc;
+ if (strncmp (name, "__fn_stub_", 10) != 0
+ && strcmp (name, "etext") != 0
+ && strcmp (name, "_etext") != 0)
+ return target_pc;
+
+ /* Scan through this _fn_stub_ code for the lui/addiu pair.
+ The limit on the search is arbitrarily set to 20
+ instructions. FIXME. */
+ for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSTLEN)
+ {
+ inst = mips_fetch_instruction (target_pc);
+ if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
+ pc = (inst << 16) & 0xffff0000; /* high word */
+ else if ((inst & 0xffff0000) == 0x24210000) /* addiu $at */
+ return pc | (inst & 0xffff); /* low word */
+ }
+
+ /* Couldn't find the lui/addui pair, so return stub address. */
+ return target_pc;
+ }
+ else
+ /* This is the 'return' part of a call stub. The return
+ address is in $r18. */
+ return read_register (18);
+ }
+ }
+ return 0; /* not a stub */
+}
+
+
+/* Return non-zero if the PC is inside a call thunk (aka stub or trampoline).
+ This implements the IN_SOLIB_CALL_TRAMPOLINE macro. */
+
+int
+mips_in_call_stub (pc, name)
+ CORE_ADDR pc;
+ char *name;
+{
+ CORE_ADDR start_addr;
+
+ /* Find the starting address of the function containing the PC. If the
+ caller didn't give us a name, look it up at the same time. */
+ if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == 0)
+ return 0;
+
+ if (strncmp (name, "__mips16_call_stub_", 19) == 0)
+ {
+ /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub. */
+ if (name[19] >= '0' && name[19] <= '9')
+ return 1;
+ /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+ before the jal instruction, this is effectively a call stub. */
+ else if (name[19] == 's' || name[19] == 'd')
+ return pc == start_addr;
+ }
+
+ return 0; /* not a stub */
+}
+
+
+/* Return non-zero if the PC is inside a return thunk (aka stub or trampoline).
+ This implements the IN_SOLIB_RETURN_TRAMPOLINE macro. */
+
+int
+mips_in_return_stub (pc, name)
+ CORE_ADDR pc;
+ char *name;
+{
+ CORE_ADDR start_addr;
+
+ /* Find the starting address of the function containing the PC. */
+ if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_ret_{d,s}f, this is a return stub. */
+ if (strcmp (name, "__mips16_ret_sf") == 0
+ || strcmp (name, "__mips16_ret_df") == 0)
+ return 1;
+
+ /* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
+ i.e. after the jal instruction, this is effectively a return stub. */
+ if (strncmp (name, "__mips16_call_stub_", 19) == 0
+ && (name[19] == 's' || name[19] == 'd')
+ && pc != start_addr)
+ return 1;
+
+ return 0; /* not a stub */
+}
+
+
+/* Return non-zero if the PC is in a library helper function that should
+ be ignored. This implements the IGNORE_HELPER_CALL macro. */
+
+int
+mips_ignore_helper (pc)
+ CORE_ADDR pc;
+{
+ char *name;
+
+ /* Find the starting address and name of the function containing the PC. */
+ if (find_pc_partial_function (pc, &name, NULL, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_ret_{d,s}f, this is a library helper function
+ that we want to ignore. */
+ return (strcmp (name, "__mips16_ret_sf") == 0
+ || strcmp (name, "__mips16_ret_df") == 0);
+}
+
+
+/* Return a location where we can set a breakpoint that will be hit
+ when an inferior function call returns. This is normally the
+ program's entry point. Executables that don't have an entry
+ point (e.g. programs in ROM) should define a symbol __CALL_DUMMY_ADDRESS
+ whose address is the location where the breakpoint should be placed. */
+
+CORE_ADDR
+mips_call_dummy_address ()
+{
+ struct minimal_symbol *sym;
+
+ sym = lookup_minimal_symbol ("__CALL_DUMMY_ADDRESS", NULL, NULL);
+ if (sym)
+ return SYMBOL_VALUE_ADDRESS (sym);
+ else
+ return entry_point_address ();
+}
+
+/* start-sanitize-carp start-sanitize-vr4xxx */
+
+static gdbarch_init_ftype mips_gdbarch_init;
+static struct gdbarch *
+mips_gdbarch_init (info, arches)
+ struct gdbarch_info info;
+ struct gdbarch_list *arches;
+{
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int elf_abi;
+ char *abi_name;
+
+ /* find a default for ELF_ABI */
+ if (info.abfd != NULL)
+ elf_abi = elf_elfheader (info.abfd)->e_flags & EF_MIPS_ABI;
+ else if (gdbarch_bfd_arch_info (current_gdbarch)->arch == bfd_arch_mips)
+ elf_abi = gdbarch_tdep (current_gdbarch)->elf_abi;
+ else
+ elf_abi = 0;
+
+ /* try to find a pre-existing architecture */
+ for (arches = gdbarch_list_lookup_by_info (arches, &info);
+ arches != NULL;
+ arches = gdbarch_list_lookup_by_info (arches->next, &info))
+ {
+ /* MIPS needs to be pedantic about which ABI the object is
+ using. */
+ if (gdbarch_tdep (current_gdbarch)->elf_abi != elf_abi)
+ continue;
+ return arches->gdbarch;
+ }
+
+ /* Need a new architecture. Fill in a target specific vector. */
+ tdep = (struct gdbarch_tdep*) xmalloc (sizeof (struct gdbarch_tdep));
+ gdbarch = gdbarch_alloc (&info, tdep);
+ tdep->elf_abi = elf_abi;
+ switch (elf_abi)
+ {
+ case E_MIPS_ABI_O32:
+ abi_name = "o32";
+ tdep->mips_eabi = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ break;
+ case E_MIPS_ABI_O64:
+ abi_name = "o64";
+ tdep->mips_eabi = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ break;
+ case E_MIPS_ABI_EABI32:
+ abi_name = "eabi32";
+ tdep->mips_eabi = 1;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ break;
+ case E_MIPS_ABI_EABI64:
+ abi_name = "eabi64";
+ tdep->mips_eabi = 1;
+ set_gdbarch_long_bit (gdbarch, 64);
+ set_gdbarch_ptr_bit (gdbarch, 64);
+ break;
+ default:
+ abi_name = "default";
+ tdep->mips_eabi = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ break;
+ }
+ if (tdep->mips_eabi)
+ {
+ /* EABI uses R4 through R11 for args */
+ tdep->mips_last_arg_regnum = 11;
+ /* EABI uses F12 through F19 for args */
+ tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 19;
+ }
+ else
+ {
+ /* old ABI uses R4 through R7 for args */
+ tdep->mips_last_arg_regnum = 7;
+ /* old ABI uses F12 through F15 for args */
+ tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 15;
+ }
+ set_gdbarch_long_long_bit (gdbarch, 64);
+
+ /* enable/disable the MIPS FPU */
+ if (!mips_fpu_type_auto)
+ tdep->mips_fpu_type = mips_fpu_type;
+ else if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips)
+ switch (info.bfd_arch_info->mach)
+ {
+ case bfd_mach_mips4100:
+ case bfd_mach_mips4111:
+ case bfd_mach_mips4121:
+ tdep->mips_fpu_type = MIPS_FPU_NONE;
+ break;
+ default:
+ tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
+ break;
+ }
+ else
+ tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
+
+ if (gdbarch_debug)
+ {
+ fprintf_unfiltered (stderr,
+ "mips_gdbarch_init: (info)elf_abi 0x%x (%s)\n",
+ elf_abi, abi_name);
+ fprintf_unfiltered (stderr,
+ "mips_gdbarch_init: MIPS_EABI = %d\n",
+ tdep->mips_eabi);
+ fprintf_unfiltered (stderr,
+ "mips_gdbarch_init: MIPS_LAST_ARG_REGNUM = %d\n",
+ tdep->mips_last_arg_regnum);
+ fprintf_unfiltered (stderr,
+ "mips_gdbarch_init: MIPS_LAST_FP_ARG_REGNUM = %d (%d)\n",
+ tdep->mips_last_fp_arg_regnum,
+ tdep->mips_last_fp_arg_regnum - FP0_REGNUM);
+ fprintf_unfiltered (stderr,
+ "mips_gdbarch_init: tdep->mips_fpu_type = %d (%s)\n",
+ tdep->mips_fpu_type,
+ (tdep->mips_fpu_type == MIPS_FPU_NONE ? "none"
+ : tdep->mips_fpu_type == MIPS_FPU_SINGLE ? "single"
+ : tdep->mips_fpu_type == MIPS_FPU_DOUBLE ? "double"
+ : "???"));
+ }
+
+ return gdbarch;
+}
+
+/* end-sanitize-carp end-sanitize-vr4xxx */
+
void
_initialize_mips_tdep ()
{
+ static struct cmd_list_element *mipsfpulist = NULL;
struct cmd_list_element *c;
- tm_print_insn = gdb_print_insn_mips;
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+ if (GDB_MULTI_ARCH)
+ register_gdbarch_init (bfd_arch_mips, mips_gdbarch_init);
+ /* end-sanitize-carp end-sanitize-vr4xxx */
+ if (!tm_print_insn) /* Someone may have already set it */
+ tm_print_insn = gdb_print_insn_mips;
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
- c = add_set_cmd ("mipsfpu", class_support, var_string_noescape,
- (char *) &mips_fpu_string,
- "Set use of floating point coprocessor.\n\
-Set to `none' to avoid using floating point instructions when calling\n\
-functions or dealing with return values. Set to `single' to use only\n\
-single precision floating point as on the R4650. Set to `double' for\n\
-normal floating point support.",
- &setlist);
- c->function.sfunc = mips_set_fpu_command;
- c = add_show_from_set (c, &showlist);
- c->function.sfunc = mips_show_fpu_command;
-
- mips_fpu = MIPS_FPU_DOUBLE;
- mips_fpu_string = strsave ("double");
-
+ add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command,
+ "Set use of MIPS floating-point coprocessor.",
+ &mipsfpulist, "set mipsfpu ", 0, &setlist);
+ add_cmd ("single", class_support, set_mipsfpu_single_command,
+ "Select single-precision MIPS floating-point coprocessor.",
+ &mipsfpulist);
+ add_cmd ("double", class_support, set_mipsfpu_double_command,
+ "Select double-precision MIPS floating-point coprocessor .",
+ &mipsfpulist);
+ add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
+ add_cmd ("none", class_support, set_mipsfpu_none_command,
+ "Select no MIPS floating-point coprocessor.",
+ &mipsfpulist);
+ add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
+ add_cmd ("auto", class_support, set_mipsfpu_auto_command,
+ "Select MIPS floating-point coprocessor automatically.",
+ &mipsfpulist);
+ add_cmd ("mipsfpu", class_support, show_mipsfpu_command,
+ "Show current use of MIPS floating-point coprocessor target.",
+ &showlist);
+
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+#if !GDB_MULTI_ARCH
+ /* end-sanitize-carp end-sanitize-vr4xxx */
c = add_set_cmd ("processor", class_support, var_string_noescape,
(char *) &tmp_mips_processor_type,
"Set the type of MIPS processor in use.\n\
tmp_mips_processor_type = strsave (DEFAULT_MIPS_TYPE);
mips_set_processor_type_command (strsave (DEFAULT_MIPS_TYPE), 0);
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+#endif
+ /* end-sanitize-carp end-sanitize-vr4xxx */
/* We really would like to have both "0" and "unlimited" work, but
command.c doesn't deal with that. So make it a var_zinteger
might change our ability to get backtraces. */
c->function.sfunc = reinit_frame_cache_sfunc;
add_show_from_set (c, &showlist);
+
+ /* Allow the user to control whether the upper bits of 64-bit
+ addresses should be zeroed. */
+ add_show_from_set
+ (add_set_cmd ("mask-address", no_class, var_boolean, (char *)&mask_address_p,
+ "Set zeroing of upper 32 bits of 64-bit addresses.\n\
+Use \"on\" to enable the masking, and \"off\" to disable it.\n\
+Without an argument, zeroing of upper address bits is enabled.", &setlist),
+ &showlist);
}