#include "target.h"
#include "opcode/mips.h"
+/* start-sanitize-carp start-sanitize-vr4xxx */
+#include "elf/mips.h"
+#include "elf-bfd.h"
+
+/* end-sanitize-carp end-sanitize-vr4xxx */
+
+/* Some MIPS boards don't support floating point, so we permit the
+ user to turn it off. */
+
+enum mips_fpu_type
+{
+ MIPS_FPU_DOUBLE, /* Full double precision floating point. */
+ MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
+ MIPS_FPU_NONE /* No floating point. */
+};
+
+#ifndef MIPS_DEFAULT_FPU_TYPE
+#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_DOUBLE
+#endif
+static int mips_fpu_type_auto = 1;
+static enum mips_fpu_type mips_fpu_type = MIPS_DEFAULT_FPU_TYPE;
+#define MIPS_FPU_TYPE mips_fpu_type
+
+/* start-sanitize-carp start-sanitize-vr4xxx */
+
+/* MIPS specific per-architecture information */
+struct gdbarch_tdep
+{
+ int elf_abi;
+ /* mips options */
+ int mips_eabi;
+ enum mips_fpu_type mips_fpu_type;
+ int mips_last_arg_regnum;
+ int mips_last_fp_arg_regnum;
+};
+
+#if GDB_MULTI_ARCH
+#undef MIPS_EABI
+#define MIPS_EABI (gdbarch_tdep (current_gdbarch)->mips_eabi)
+#endif
+
+#if GDB_MULTI_ARCH
+#undef MIPS_LAST_FP_ARG_REGNUM
+#define MIPS_LAST_FP_ARG_REGNUM (gdbarch_tdep (current_gdbarch)->mips_last_fp_arg_regnum)
+#endif
+
+#if GDB_MULTI_ARCH
+#undef MIPS_LAST_ARG_REGNUM
+#define MIPS_LAST_ARG_REGNUM (gdbarch_tdep (current_gdbarch)->mips_last_arg_regnum)
+#endif
+
+#if GDB_MULTI_ARCH
+#undef MIPS_FPU_TYPE
+#define MIPS_FPU_TYPE (gdbarch_tdep (current_gdbarch)->mips_fpu_type)
+#endif
+
+/* end-sanitize-carp end-sanitize-vr4xxx */
#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
/* Do not use "TARGET_IS_MIPS64" to test the size of floating point registers */
#define FP_REGISTER_DOUBLE (REGISTER_VIRTUAL_SIZE(FP0_REGNUM) == 8)
-/* FIXME: Put this declaration in frame.h. */
-extern struct obstack frame_cache_obstack;
-
#if 0
static int mips_in_lenient_prologue PARAMS ((CORE_ADDR, CORE_ADDR));
#endif
static CORE_ADDR read_next_frame_reg PARAMS ((struct frame_info *, int));
-static void mips_set_fpu_command PARAMS ((char *, int,
- struct cmd_list_element *));
-
-static void mips_show_fpu_command PARAMS ((char *, int,
- struct cmd_list_element *));
-
void mips_set_processor_type_command PARAMS ((char *, int));
int mips_set_processor_type PARAMS ((char *));
char *tmp_mips_processor_type;
-/* Some MIPS boards don't support floating point, so we permit the
- user to turn it off. */
-
-enum mips_fpu_type mips_fpu;
-
-static char *mips_fpu_string;
-
/* A set of original names, to be used when restoring back to generic
registers from a specific set. */
mips_extra_func_info_t proc_desc;
t_inst inst;
- fci->saved_regs = (struct frame_saved_regs *)
- obstack_alloc (&frame_cache_obstack, sizeof(struct frame_saved_regs));
- memset (fci->saved_regs, 0, sizeof (struct frame_saved_regs));
+ frame_saved_regs_zalloc (fci);
/* If it is the frame for sigtramp, the saved registers are located
in a sigcontext structure somewhere on the stack.
{
reg_position = fci->frame + SIGFRAME_REGSAVE_OFF
+ ireg * SIGFRAME_REG_SIZE;
- fci->saved_regs->regs[ireg] = reg_position;
+ fci->saved_regs[ireg] = reg_position;
}
for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
reg_position = fci->frame + SIGFRAME_FPREGSAVE_OFF
+ ireg * SIGFRAME_REG_SIZE;
- fci->saved_regs->regs[FP0_REGNUM + ireg] = reg_position;
+ fci->saved_regs[FP0_REGNUM + ireg] = reg_position;
}
- fci->saved_regs->regs[PC_REGNUM] = fci->frame + SIGFRAME_PC_OFF;
+ fci->saved_regs[PC_REGNUM] = fci->frame + SIGFRAME_PC_OFF;
return;
}
for (ireg= MIPS_NUMREGS-1; gen_mask; --ireg, gen_mask <<= 1)
if (gen_mask & 0x80000000)
{
- fci->saved_regs->regs[ireg] = reg_position;
+ fci->saved_regs[ireg] = reg_position;
reg_position -= MIPS_REGSIZE;
/* start-sanitize-r5900 */
#ifdef R5900_128BIT_GPR_HACK
/* Check if the s0 and s1 registers were pushed on the stack. */
for (reg = 16; reg < sreg_count+16; reg++)
{
- fci->saved_regs->regs[reg] = reg_position;
+ fci->saved_regs[reg] = reg_position;
reg_position -= MIPS_REGSIZE;
}
}
for (ireg = MIPS_NUMREGS-1; float_mask; --ireg, float_mask <<= 1)
if (float_mask & 0x80000000)
{
- fci->saved_regs->regs[FP0_REGNUM+ireg] = reg_position;
+ fci->saved_regs[FP0_REGNUM+ireg] = reg_position;
reg_position -= MIPS_REGSIZE;
}
- fci->saved_regs->regs[PC_REGNUM] = fci->saved_regs->regs[RA_REGNUM];
+ fci->saved_regs[PC_REGNUM] = fci->saved_regs[RA_REGNUM];
}
static CORE_ADDR
{
if (fi->saved_regs == NULL)
mips_find_saved_regs (fi);
- if (fi->saved_regs->regs[regno])
- return read_memory_integer(fi->saved_regs->regs[regno], MIPS_REGSIZE);
+ if (fi->saved_regs[regno])
+ return read_memory_integer(fi->saved_regs[regno], MIPS_REGSIZE);
}
}
return read_register (regno);
CORE_ADDR cur_pc;
CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
restart:
+ memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
PROC_FRAME_OFFSET(&temp_proc_desc) = 0;
PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN)
(CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
if (!IN_SIGTRAMP (fci->pc, name))
{
- fci->saved_regs = (struct frame_saved_regs*)
- obstack_alloc (&frame_cache_obstack,
- sizeof (struct frame_saved_regs));
- *fci->saved_regs = temp_saved_regs;
- fci->saved_regs->regs[PC_REGNUM]
- = fci->saved_regs->regs[RA_REGNUM];
+ fci->saved_regs = (CORE_ADDR*)
+ frame_obstack_alloc (SIZEOF_FRAME_SAVED_REGS);
+ memcpy (fci->saved_regs, temp_saved_regs.regs, SIZEOF_FRAME_SAVED_REGS);
+ fci->saved_regs[PC_REGNUM]
+ = fci->saved_regs[RA_REGNUM];
}
}
because those registers are normally skipped. */
if (typecode == TYPE_CODE_FLT
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM
- && mips_fpu != MIPS_FPU_NONE)
+ && MIPS_FPU_TYPE != MIPS_FPU_NONE)
{
if (!FP_REGISTER_DOUBLE && len == 8)
{
It does not seem to be necessary to do the
same for integral types.
- Also don't do this adjustment on EABI targets. */
+ Also don't do this adjustment on EABI and O64
+ binaries. */
- if (!MIPS_EABI &&
- TARGET_BYTE_ORDER == BIG_ENDIAN &&
- partial_len < MIPS_REGSIZE &&
- (typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION))
+ if (!MIPS_EABI
+ && (MIPS_REGSIZE < 8)
+ && TARGET_BYTE_ORDER == BIG_ENDIAN
+ && (partial_len < MIPS_REGSIZE)
+ && (typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION))
regval <<= ((MIPS_REGSIZE - partial_len) *
TARGET_CHAR_BIT);
mips_push_register (&sp, PC_REGNUM);
mips_push_register (&sp, HI_REGNUM);
mips_push_register (&sp, LO_REGNUM);
- mips_push_register (&sp, mips_fpu == MIPS_FPU_NONE ? 0 : FCRCS_REGNUM);
+ mips_push_register (&sp, MIPS_FPU_TYPE == MIPS_FPU_NONE ? 0 : FCRCS_REGNUM);
/* Save general CPU registers */
PROC_REG_MASK(proc_desc) = GEN_REG_SAVE_MASK;
/* Save floating point registers starting with high order word */
PROC_FREG_MASK(proc_desc) =
- mips_fpu == MIPS_FPU_DOUBLE ? FLOAT_REG_SAVE_MASK
- : mips_fpu == MIPS_FPU_SINGLE ? FLOAT_SINGLE_REG_SAVE_MASK : 0;
+ MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? FLOAT_REG_SAVE_MASK
+ : MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? FLOAT_SINGLE_REG_SAVE_MASK : 0;
/* PROC_FREG_OFFSET is the offset of the first saved *double* register
from FP. */
PROC_FREG_OFFSET(proc_desc) = sp - old_sp - 8;
for (regnum = 0; regnum < NUM_REGS; regnum++)
{
if (regnum != SP_REGNUM && regnum != PC_REGNUM
- && frame->saved_regs->regs[regnum])
+ && frame->saved_regs[regnum])
write_register (regnum,
- read_memory_integer (frame->saved_regs->regs[regnum],
+ read_memory_integer (frame->saved_regs[regnum],
MIPS_REGSIZE));
}
write_register (SP_REGNUM, new_sp);
read_memory_integer (new_sp - 2*MIPS_REGSIZE, MIPS_REGSIZE));
write_register (LO_REGNUM,
read_memory_integer (new_sp - 3*MIPS_REGSIZE, MIPS_REGSIZE));
- if (mips_fpu != MIPS_FPU_NONE)
+ if (MIPS_FPU_TYPE != MIPS_FPU_NONE)
write_register (FCRCS_REGNUM,
read_memory_integer (new_sp - 4*MIPS_REGSIZE, MIPS_REGSIZE));
}
REGISTER_CONVERT_TO_TYPE (regnum, builtin_type_double, dbuffer);
printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
- val_print (builtin_type_double, dbuffer, 0,
+ val_print (builtin_type_double, dbuffer, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
printf_filtered ("); ");
}
int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
printf_filtered (" (float) ");
- val_print (builtin_type_float, raw_buffer + offset, 0,
+ val_print (builtin_type_float, raw_buffer + offset, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
printf_filtered (", (double) ");
- val_print (builtin_type_double, raw_buffer, 0,
+ val_print (builtin_type_double, raw_buffer, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
}
else
- val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0,
+ val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
/* Else print as integer in hex. */
else
regnum = 2;
if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && (mips_fpu == MIPS_FPU_DOUBLE
- || (mips_fpu == MIPS_FPU_SINGLE && len <= MIPS_FPU_SINGLE_REGSIZE)))
+ && (MIPS_FPU_TYPE == MIPS_FPU_DOUBLE
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE
+ && len <= MIPS_FPU_SINGLE_REGSIZE)))
regnum = FP0_REGNUM;
if (TARGET_BYTE_ORDER == BIG_ENDIAN)
regnum = 2;
if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && (mips_fpu == MIPS_FPU_DOUBLE
- || (mips_fpu == MIPS_FPU_SINGLE && len <= MIPS_REGSIZE)))
+ && (MIPS_FPU_TYPE == MIPS_FPU_DOUBLE
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE
+ && len <= MIPS_REGSIZE)))
regnum = FP0_REGNUM;
if (TARGET_BYTE_ORDER == BIG_ENDIAN)
return (pc >= sigtramp_address && pc < sigtramp_end);
}
-/* Command to set FPU type. mips_fpu_string will have been set to the
- user's argument. Set mips_fpu based on mips_fpu_string, and then
- canonicalize mips_fpu_string. */
+/* Commands to show/set the MIPS FPU type. */
-/*ARGSUSED*/
+static void show_mipsfpu_command PARAMS ((char *, int));
static void
-mips_set_fpu_command (args, from_tty, c)
+show_mipsfpu_command (args, from_tty)
char *args;
int from_tty;
- struct cmd_list_element *c;
{
- char *err = NULL;
-
- if (mips_fpu_string == NULL || *mips_fpu_string == '\0')
- mips_fpu = MIPS_FPU_DOUBLE;
- else if (strcasecmp (mips_fpu_string, "double") == 0
- || strcasecmp (mips_fpu_string, "on") == 0
- || strcasecmp (mips_fpu_string, "1") == 0
- || strcasecmp (mips_fpu_string, "yes") == 0)
- mips_fpu = MIPS_FPU_DOUBLE;
- else if (strcasecmp (mips_fpu_string, "none") == 0
- || strcasecmp (mips_fpu_string, "off") == 0
- || strcasecmp (mips_fpu_string, "0") == 0
- || strcasecmp (mips_fpu_string, "no") == 0)
- mips_fpu = MIPS_FPU_NONE;
- else if (strcasecmp (mips_fpu_string, "single") == 0)
- mips_fpu = MIPS_FPU_SINGLE;
- else
- err = strsave (mips_fpu_string);
-
- if (mips_fpu_string != NULL)
- free (mips_fpu_string);
-
- switch (mips_fpu)
+ char *msg;
+ char *fpu;
+ switch (MIPS_FPU_TYPE)
{
- case MIPS_FPU_DOUBLE:
- mips_fpu_string = strsave ("double");
- break;
case MIPS_FPU_SINGLE:
- mips_fpu_string = strsave ("single");
+ fpu = "single-precision";
+ break;
+ case MIPS_FPU_DOUBLE:
+ fpu = "double-precision";
break;
case MIPS_FPU_NONE:
- mips_fpu_string = strsave ("none");
+ fpu = "absent (none)";
break;
}
+ if (mips_fpu_type_auto)
+ printf_unfiltered ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
+ fpu);
+ else
+ printf_unfiltered ("The MIPS floating-point coprocessor is assumed to be %s\n",
+ fpu);
+}
- if (err != NULL)
+
+static void set_mipsfpu_command PARAMS ((char *, int));
+static void
+set_mipsfpu_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
+ show_mipsfpu_command (args, from_tty);
+}
+
+static void set_mipsfpu_single_command PARAMS ((char *, int));
+static void
+set_mipsfpu_single_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ mips_fpu_type = MIPS_FPU_SINGLE;
+ mips_fpu_type_auto = 0;
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+ if (GDB_MULTI_ARCH)
{
- struct cleanup *cleanups = make_cleanup (free, err);
- error ("Unknown FPU type `%s'. Use `double', `none', or `single'.",
- err);
- do_cleanups (cleanups);
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_SINGLE;
}
+ /* end-sanitize-carp end-sanitize-vr4xxx */
}
+static void set_mipsfpu_double_command PARAMS ((char *, int));
static void
-mips_show_fpu_command (args, from_tty, c)
+set_mipsfpu_double_command (args, from_tty)
char *args;
int from_tty;
- struct cmd_list_element *c;
{
+ mips_fpu_type = MIPS_FPU_DOUBLE;
+ mips_fpu_type_auto = 0;
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+ if (GDB_MULTI_ARCH)
+ {
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_DOUBLE;
+ }
+ /* end-sanitize-carp end-sanitize-vr4xxx */
+}
+
+static void set_mipsfpu_none_command PARAMS ((char *, int));
+static void
+set_mipsfpu_none_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ mips_fpu_type = MIPS_FPU_NONE;
+ mips_fpu_type_auto = 0;
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+ if (GDB_MULTI_ARCH)
+ {
+ gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_NONE;
+ }
+ /* end-sanitize-carp end-sanitize-vr4xxx */
+}
+
+static void set_mipsfpu_auto_command PARAMS ((char *, int));
+static void
+set_mipsfpu_auto_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ mips_fpu_type_auto = 1;
}
/* Command to set the processor type. */
return entry_point_address ();
}
+/* start-sanitize-carp start-sanitize-vr4xxx */
+
+static gdbarch_init_ftype mips_gdbarch_init;
+static struct gdbarch *
+mips_gdbarch_init (info, arches)
+ struct gdbarch_info info;
+ struct gdbarch_list *arches;
+{
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int elf_abi;
+ char *abi_name;
+
+ /* find a default for ELF_ABI */
+ if (info.abfd != NULL)
+ elf_abi = elf_elfheader (info.abfd)->e_flags & EF_MIPS_ABI;
+ else if (gdbarch_bfd_arch_info (current_gdbarch)->arch == bfd_arch_mips)
+ elf_abi = gdbarch_tdep (current_gdbarch)->elf_abi;
+ else
+ elf_abi = 0;
+
+ /* try to find a pre-existing architecture */
+ for (arches = gdbarch_list_lookup_by_info (arches, &info);
+ arches != NULL;
+ arches = gdbarch_list_lookup_by_info (arches->next, &info))
+ {
+ /* MIPS needs to be pedantic about which ABI the object is
+ using. */
+ if (gdbarch_tdep (current_gdbarch)->elf_abi != elf_abi)
+ continue;
+ return arches->gdbarch;
+ }
+
+ /* Need a new architecture. Fill in a target specific vector. */
+ tdep = (struct gdbarch_tdep*) xmalloc (sizeof (struct gdbarch_tdep));
+ gdbarch = gdbarch_alloc (&info, tdep);
+ tdep->elf_abi = elf_abi;
+ switch (elf_abi)
+ {
+ case E_MIPS_ABI_O32:
+ abi_name = "o32";
+ tdep->mips_eabi = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ break;
+ case E_MIPS_ABI_O64:
+ abi_name = "o64";
+ tdep->mips_eabi = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ break;
+ case E_MIPS_ABI_EABI32:
+ abi_name = "eabi32";
+ tdep->mips_eabi = 1;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ break;
+ case E_MIPS_ABI_EABI64:
+ abi_name = "eabi64";
+ tdep->mips_eabi = 1;
+ set_gdbarch_long_bit (gdbarch, 64);
+ set_gdbarch_ptr_bit (gdbarch, 64);
+ break;
+ default:
+ abi_name = "default";
+ tdep->mips_eabi = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ break;
+ }
+ if (tdep->mips_eabi)
+ {
+ /* EABI uses R4 through R11 for args */
+ tdep->mips_last_arg_regnum = 11;
+ /* EABI uses F12 through F19 for args */
+ tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 19;
+ }
+ else
+ {
+ /* old ABI uses R4 through R7 for args */
+ tdep->mips_last_arg_regnum = 7;
+ /* old ABI uses F12 through F15 for args */
+ tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 15;
+ }
+ set_gdbarch_long_long_bit (gdbarch, 64);
+
+ /* enable/disable the MIPS FPU */
+ if (!mips_fpu_type_auto)
+ tdep->mips_fpu_type = mips_fpu_type;
+ else if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips)
+ switch (info.bfd_arch_info->mach)
+ {
+ case bfd_mach_mips4100:
+ case bfd_mach_mips4111:
+ case bfd_mach_mips4121:
+ tdep->mips_fpu_type = MIPS_FPU_NONE;
+ break;
+ default:
+ tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
+ break;
+ }
+ else
+ tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
+
+ if (gdbarch_debug)
+ {
+ fprintf_unfiltered (stderr,
+ "mips_gdbarch_init: (info)elf_abi 0x%x (%s)\n",
+ elf_abi, abi_name);
+ fprintf_unfiltered (stderr,
+ "mips_gdbarch_init: MIPS_EABI = %d\n",
+ tdep->mips_eabi);
+ fprintf_unfiltered (stderr,
+ "mips_gdbarch_init: MIPS_LAST_ARG_REGNUM = %d\n",
+ tdep->mips_last_arg_regnum);
+ fprintf_unfiltered (stderr,
+ "mips_gdbarch_init: MIPS_LAST_FP_ARG_REGNUM = %d (%d)\n",
+ tdep->mips_last_fp_arg_regnum,
+ tdep->mips_last_fp_arg_regnum - FP0_REGNUM);
+ fprintf_unfiltered (stderr,
+ "mips_gdbarch_init: tdep->mips_fpu_type = %d (%s)\n",
+ tdep->mips_fpu_type,
+ (tdep->mips_fpu_type == MIPS_FPU_NONE ? "none"
+ : tdep->mips_fpu_type == MIPS_FPU_SINGLE ? "single"
+ : tdep->mips_fpu_type == MIPS_FPU_DOUBLE ? "double"
+ : "???"));
+ }
+
+ return gdbarch;
+}
+
+/* end-sanitize-carp end-sanitize-vr4xxx */
+
void
_initialize_mips_tdep ()
{
+ static struct cmd_list_element *mipsfpulist = NULL;
struct cmd_list_element *c;
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+ if (GDB_MULTI_ARCH)
+ register_gdbarch_init (bfd_arch_mips, mips_gdbarch_init);
+ /* end-sanitize-carp end-sanitize-vr4xxx */
if (!tm_print_insn) /* Someone may have already set it */
tm_print_insn = gdb_print_insn_mips;
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
- c = add_set_cmd ("mipsfpu", class_support, var_string_noescape,
- (char *) &mips_fpu_string,
- "Set use of floating point coprocessor.\n\
-Set to `none' to avoid using floating point instructions when calling\n\
-functions or dealing with return values. Set to `single' to use only\n\
-single precision floating point as on the R4650. Set to `double' for\n\
-normal floating point support.",
- &setlist);
- c->function.sfunc = mips_set_fpu_command;
- c = add_show_from_set (c, &showlist);
- c->function.sfunc = mips_show_fpu_command;
-
-#ifndef MIPS_DEFAULT_FPU_TYPE
- mips_fpu = MIPS_FPU_DOUBLE;
- mips_fpu_string = strsave ("double");
-#else
- mips_fpu = MIPS_DEFAULT_FPU_TYPE;
- switch (mips_fpu)
- {
- case MIPS_FPU_DOUBLE: mips_fpu_string = strsave ("double"); break;
- case MIPS_FPU_SINGLE: mips_fpu_string = strsave ("single"); break;
- case MIPS_FPU_NONE: mips_fpu_string = strsave ("none"); break;
- }
-#endif
-
+ add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command,
+ "Set use of MIPS floating-point coprocessor.",
+ &mipsfpulist, "set mipsfpu ", 0, &setlist);
+ add_cmd ("single", class_support, set_mipsfpu_single_command,
+ "Select single-precision MIPS floating-point coprocessor.",
+ &mipsfpulist);
+ add_cmd ("double", class_support, set_mipsfpu_double_command,
+ "Select double-precision MIPS floating-point coprocessor .",
+ &mipsfpulist);
+ add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
+ add_cmd ("none", class_support, set_mipsfpu_none_command,
+ "Select no MIPS floating-point coprocessor.",
+ &mipsfpulist);
+ add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
+ add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
+ add_cmd ("auto", class_support, set_mipsfpu_auto_command,
+ "Select MIPS floating-point coprocessor automatically.",
+ &mipsfpulist);
+ add_cmd ("mipsfpu", class_support, show_mipsfpu_command,
+ "Show current use of MIPS floating-point coprocessor target.",
+ &showlist);
+
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+#if !GDB_MULTI_ARCH
+ /* end-sanitize-carp end-sanitize-vr4xxx */
c = add_set_cmd ("processor", class_support, var_string_noescape,
(char *) &tmp_mips_processor_type,
"Set the type of MIPS processor in use.\n\
tmp_mips_processor_type = strsave (DEFAULT_MIPS_TYPE);
mips_set_processor_type_command (strsave (DEFAULT_MIPS_TYPE), 0);
+ /* start-sanitize-carp start-sanitize-vr4xxx */
+#endif
+ /* end-sanitize-carp end-sanitize-vr4xxx */
/* We really would like to have both "0" and "unlimited" work, but
command.c doesn't deal with that. So make it a var_zinteger