/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
- Foundation, Inc.
+ Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "gdb_string.h"
static struct type *mips_register_type (struct gdbarch *gdbarch, int regnum);
-/* A useful bit in the CP0 status register (PS_REGNUM). */
+/* A useful bit in the CP0 status register (MIPS_PS_REGNUM). */
/* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */
#define ST0_FR (1 << 26)
NULL
};
-struct frame_extra_info
-{
- mips_extra_func_info_t proc_desc;
- int num_args;
-};
-
/* Various MIPS ISA options (related to stack analysis) can be
overridden dynamically. Establish an enum/array for managing
them. */
static int
n32n64_floatformat_always_valid (const struct floatformat *fmt,
- const char *from)
+ const void *from)
{
return 1;
}
case MIPS_ABI_UNKNOWN:
case MIPS_ABI_LAST:
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
else if (mips_abi_regsize_string == size_64)
return 8;
static void
mips_xfer_register (struct regcache *regcache, int reg_num, int length,
- enum bfd_endian endian, bfd_byte * in,
- const bfd_byte * out, int buf_offset)
+ enum bfd_endian endian, gdb_byte *in,
+ const gdb_byte *out, int buf_offset)
{
int reg_offset = 0;
gdb_assert (reg_num >= NUM_REGS);
reg_offset = 0;
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
if (mips_debug)
fprintf_unfiltered (gdb_stderr,
/* Otherwise check the FR bit in the status register - it controls
the FP compatiblity mode. If it is clear we are in compatibility
mode. */
- if ((read_register (PS_REGNUM) & ST0_FR) == 0)
+ if ((read_register (MIPS_PS_REGNUM) & ST0_FR) == 0)
return 1;
#endif
}
else
internal_error (__FILE__, __LINE__,
- "mips_register_name: bad register number %d", rawnum);
+ _("mips_register_name: bad register number %d"), rawnum);
}
/* Return the groups that a MIPS register can be categorised into. */
static void
mips_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
- int cookednum, void *buf)
+ int cookednum, gdb_byte *buf)
{
int rawnum = cookednum % NUM_REGS;
gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
regcache_raw_read_part (regcache, rawnum, 4, 4, buf);
}
else
- internal_error (__FILE__, __LINE__, "bad register size");
+ internal_error (__FILE__, __LINE__, _("bad register size"));
}
static void
mips_pseudo_register_write (struct gdbarch *gdbarch,
struct regcache *regcache, int cookednum,
- const void *buf)
+ const gdb_byte *buf)
{
int rawnum = cookednum % NUM_REGS;
gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
regcache_raw_write_part (regcache, rawnum, 4, 4, buf);
}
else
- internal_error (__FILE__, __LINE__, "bad register size");
+ internal_error (__FILE__, __LINE__, _("bad register size"));
}
/* Table to translate MIPS16 register field to actual register number. */
if (!gdbarch_update_p (info))
{
mips64_transfers_32bit_regs_p = 0;
- error ("32-bit compatibility mode not supported");
+ error (_("32-bit compatibility mode not supported"));
}
}
static void
mips_register_to_value (struct frame_info *frame, int regnum,
- struct type *type, void *to)
+ struct type *type, gdb_byte *to)
{
- get_frame_register (frame, regnum + 0, (char *) to + 4);
- get_frame_register (frame, regnum + 1, (char *) to + 0);
+ get_frame_register (frame, regnum + 0, to + 4);
+ get_frame_register (frame, regnum + 1, to + 0);
}
static void
mips_value_to_register (struct frame_info *frame, int regnum,
- struct type *type, const void *from)
+ struct type *type, const gdb_byte *from)
{
- put_frame_register (frame, regnum + 0, (const char *) from + 4);
- put_frame_register (frame, regnum + 1, (const char *) from + 0);
+ put_frame_register (frame, regnum + 0, from + 4);
+ put_frame_register (frame, regnum + 1, from + 0);
}
/* Return the GDB type object for the "standard" data type of data in
return builtin_type_ieee_double_little;
case BFD_ENDIAN_UNKNOWN:
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
}
else if (regnum < NUM_REGS)
the ABI (with a few complications). */
if (regnum >= (NUM_REGS
+ mips_regnum (current_gdbarch)->fp_control_status)
- && regnum <= NUM_REGS + LAST_EMBED_REGNUM)
+ && regnum <= NUM_REGS + MIPS_LAST_EMBED_REGNUM)
/* The pseudo/cooked view of the embedded registers is always
32-bit. The raw view is handled below. */
return builtin_type_int32;
case AUTO_BOOLEAN_AUTO:
return tdep->default_mask_address_p;
default:
- internal_error (__FILE__, __LINE__, "mips_mask_address_p: bad switch");
+ internal_error (__FILE__, __LINE__, _("mips_mask_address_p: bad switch"));
return -1;
}
}
static void
-show_mask_address (char *cmd, int from_tty, struct cmd_list_element *c)
+show_mask_address (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ deprecated_show_value_hack (file, from_tty, c, value);
switch (mask_address_var)
{
case AUTO_BOOLEAN_TRUE:
mips_mask_address_p (tdep) ? "enabled" : "disabled");
break;
default:
- internal_error (__FILE__, __LINE__, "show_mask_address: bad switch");
+ internal_error (__FILE__, __LINE__, _("show_mask_address: bad switch"));
break;
}
}
static ULONGEST
mips_fetch_instruction (CORE_ADDR addr)
{
- char buf[MIPS_INSN32_SIZE];
+ gdb_byte buf[MIPS_INSN32_SIZE];
int instlen;
int status;
#define rtype_shamt(x) ((x >> 6) & 0x1f)
#define rtype_funct(x) (x & 0x3f)
-static CORE_ADDR
-mips32_relative_offset (unsigned long inst)
+static LONGEST
+mips32_relative_offset (ULONGEST inst)
{
- long x;
- x = itype_immediate (inst);
- if (x & 0x8000) /* sign bit set */
- {
- x |= 0xffff0000; /* sign extension */
- }
- x = x << 2;
- return x;
+ return ((itype_immediate (inst) ^ 0x8000) - 0x8000) << 2;
}
/* Determine whate to set a single step breakpoint while considering
static unsigned int
fetch_mips_16 (CORE_ADDR pc)
{
- char buf[8];
+ gdb_byte buf[8];
pc &= 0xfffffffe; /* clear the low order bit */
target_read_memory (pc, buf, 2);
return extract_unsigned_integer (buf, 2);
break;
}
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
upk->offset = offset;
upk->regx = regx;
void **this_cache,
int regnum, int *optimizedp,
enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
+ int *realnump, gdb_byte *valuep)
{
struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
this_cache);
void **this_cache,
int regnum, int *optimizedp,
enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
+ int *realnump, gdb_byte *valuep)
{
struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
this_cache);
void **this_cache,
int regnum, int *optimizedp,
enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
+ int *realnump, gdb_byte *valuep)
{
struct trad_frame_cache *this_trad_cache
= mips_stub_frame_cache (next_frame, this_cache);
static const struct frame_unwind *
mips_stub_frame_sniffer (struct frame_info *next_frame)
{
+ struct obj_section *s;
CORE_ADDR pc = frame_pc_unwind (next_frame);
+
if (in_plt_section (pc, NULL))
return &mips_stub_frame_unwind;
- else
- return NULL;
+
+ /* Binutils for MIPS puts lazy resolution stubs into .MIPS.stubs. */
+ s = find_pc_section (pc);
+
+ if (s != NULL
+ && strcmp (bfd_get_section_name (s->objfile->obfd, s->the_bfd_section),
+ ".MIPS.stubs") == 0)
+ return &mips_stub_frame_unwind;
+
+ return NULL;
}
static CORE_ADDR
target_remove_breakpoint (next_pc, break_mem);
}
-static struct mips_extra_func_info temp_proc_desc;
-
/* Test whether the PC points to the return instruction at the
end of a function. */
{
static int blurb_printed = 0;
- warning ("GDB can't find the start of the function at 0x%s.",
+ warning (_("GDB can't find the start of the function at 0x%s."),
paddr_nz (pc));
if (!blurb_printed)
than necessary for EABI, because the first few arguments are
passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
- char valbuf[MAX_REGISTER_SIZE];
+ const gdb_byte *val;
+ gdb_byte valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
fprintf_unfiltered (gdb_stdlog, " push");
}
else
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
static enum return_value_convention
mips_eabi_return_value (struct gdbarch *gdbarch,
struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
if (TYPE_LENGTH (type) > 2 * mips_abi_regsize (gdbarch))
return RETURN_VALUE_STRUCT_CONVENTION;
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
+ const gdb_byte *val;
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
"mips_n32n64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
static enum return_value_convention
mips_n32n64_return_value (struct gdbarch *gdbarch,
struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
if (TYPE_CODE (type) == TYPE_CODE_STRUCT
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
+ const gdb_byte *val;
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
"mips_o32_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
static enum return_value_convention
mips_o32_return_value (struct gdbarch *gdbarch, struct type *type,
struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
return RETURN_VALUE_REGISTER_CONVENTION;
}
/* A struct that contains one or two floats. Each value is part
in the least significant part of their floating point
register.. */
- bfd_byte reg[MAX_REGISTER_SIZE];
+ gdb_byte reg[MAX_REGISTER_SIZE];
int regnum;
int field;
for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
+ const gdb_byte *val;
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
"mips_o64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
static enum return_value_convention
mips_o64_return_value (struct gdbarch *gdbarch,
struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
return RETURN_VALUE_STRUCT_CONVENTION;
}
static void
mips_read_fp_register_single (struct frame_info *frame, int regno,
- char *rare_buffer)
+ gdb_byte *rare_buffer)
{
int raw_size = register_size (current_gdbarch, regno);
- char *raw_buffer = alloca (raw_size);
+ gdb_byte *raw_buffer = alloca (raw_size);
if (!frame_register_read (frame, regno, raw_buffer))
- error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ error (_("can't read register %d (%s)"), regno, REGISTER_NAME (regno));
if (raw_size == 8)
{
/* We have a 64-bit value for this register. Find the low-order
static void
mips_read_fp_register_double (struct frame_info *frame, int regno,
- char *rare_buffer)
+ gdb_byte *rare_buffer)
{
int raw_size = register_size (current_gdbarch, regno);
/* We have a 64-bit value for this register, and we should use
all 64 bits. */
if (!frame_register_read (frame, regno, rare_buffer))
- error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ error (_("can't read register %d (%s)"), regno, REGISTER_NAME (regno));
}
else
{
if ((regno - mips_regnum (current_gdbarch)->fp0) & 1)
internal_error (__FILE__, __LINE__,
- "mips_read_fp_register_double: bad access to "
- "odd-numbered FP register");
+ _("mips_read_fp_register_double: bad access to "
+ "odd-numbered FP register"));
/* mips_read_fp_register_single will find the correct 32 bits from
each register. */
mips_print_fp_register (struct ui_file *file, struct frame_info *frame,
int regnum)
{ /* do values for FP (float) regs */
- char *raw_buffer;
+ gdb_byte *raw_buffer;
double doub, flt1; /* doubles extracted from raw hex data */
int inv1, inv2;
- raw_buffer =
- (char *) alloca (2 *
- register_size (current_gdbarch,
- mips_regnum (current_gdbarch)->fp0));
+ raw_buffer = alloca (2 * register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->fp0));
fprintf_filtered (file, "%s:", REGISTER_NAME (regnum));
fprintf_filtered (file, "%*s", 4 - (int) strlen (REGISTER_NAME (regnum)),
int regnum, int all)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
- char raw_buffer[MAX_REGISTER_SIZE];
+ gdb_byte raw_buffer[MAX_REGISTER_SIZE];
int offset;
if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
/* do values for GP (int) regs */
- char raw_buffer[MAX_REGISTER_SIZE];
+ gdb_byte raw_buffer[MAX_REGISTER_SIZE];
int ncols = (mips_abi_regsize (gdbarch) == 8 ? 4 : 8); /* display cols per row */
int col, byte;
int regnum;
break; /* end row: reached FP register */
/* OK: get the data in raw format. */
if (!frame_register_read (frame, regnum, raw_buffer))
- error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+ error (_("can't read register %d (%s)"), regnum, REGISTER_NAME (regnum));
/* pad small registers */
for (byte = 0;
byte < (mips_abi_regsize (current_gdbarch)
register_size (current_gdbarch,
regnum) - register_size (current_gdbarch, regnum);
byte < register_size (current_gdbarch, regnum); byte++)
- fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
+ fprintf_filtered (file, "%02x", raw_buffer[byte]);
else
for (byte = register_size (current_gdbarch, regnum) - 1;
byte >= 0; byte--)
- fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
+ fprintf_filtered (file, "%02x", raw_buffer[byte]);
fprintf_filtered (file, " ");
col++;
}
{
gdb_assert (regnum >= NUM_REGS);
if (*(REGISTER_NAME (regnum)) == '\0')
- error ("Not a valid register for the current processor type");
+ error (_("Not a valid register for the current processor type"));
mips_print_register (file, frame, regnum, 0);
fprintf_filtered (file, "\n");
}
int
-mips_step_skips_delay (CORE_ADDR pc)
+mips_single_step_through_delay (struct gdbarch *gdbarch,
+ struct frame_info *frame)
{
- char buf[MIPS_INSN32_SIZE];
+ CORE_ADDR pc = get_frame_pc (frame);
+ gdb_byte buf[MIPS_INSN32_SIZE];
/* There is no branch delay slot on MIPS16. */
if (mips_pc_is_mips16 (pc))
return 0;
- if (target_read_memory (pc, buf, sizeof buf) != 0)
- /* If error reading memory, guess that it is not a delayed branch. */
+ if (!breakpoint_here_p (pc + 4))
+ return 0;
+
+ if (!safe_frame_unwind_memory (frame, pc, buf, sizeof buf))
+ /* If error reading memory, guess that it is not a delayed
+ branch. */
return 0;
return is_delayed (extract_unsigned_integer (buf, sizeof buf));
}
fpu = "absent (none)";
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
if (mips_fpu_type_auto)
printf_unfiltered
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
CORE_ADDR prid;
- prid = read_register (PRID_REGNUM);
+ prid = read_register (MIPS_PRID_REGNUM);
if ((prid & ~0xf) == 0x700)
tdep->mips_processor_reg_names = mips_r3041_reg_names;
(if necessary) to point to the actual memory location where the
breakpoint should be inserted. */
-static const unsigned char *
+static const gdb_byte *
mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
{
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
if (mips_pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_big_breakpoint[] = { 0xe8, 0xa5 };
+ static gdb_byte mips16_big_breakpoint[] = { 0xe8, 0xa5 };
*pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_big_breakpoint);
return mips16_big_breakpoint;
/* The IDT board uses an unusual breakpoint value, and
sometimes gets confused when it sees the usual MIPS
breakpoint instruction. */
- static unsigned char big_breakpoint[] = { 0, 0x5, 0, 0xd };
- static unsigned char pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
- static unsigned char idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
+ static gdb_byte big_breakpoint[] = { 0, 0x5, 0, 0xd };
+ static gdb_byte pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
+ static gdb_byte idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
*lenptr = sizeof (big_breakpoint);
{
if (mips_pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_little_breakpoint[] = { 0xa5, 0xe8 };
+ static gdb_byte mips16_little_breakpoint[] = { 0xa5, 0xe8 };
*pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_little_breakpoint);
return mips16_little_breakpoint;
}
else
{
- static unsigned char little_breakpoint[] = { 0xd, 0, 0x5, 0 };
- static unsigned char pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
- static unsigned char idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
+ static gdb_byte little_breakpoint[] = { 0xd, 0, 0x5, 0 };
+ static gdb_byte pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
+ static gdb_byte idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
*lenptr = sizeof (little_breakpoint);
return 0; /* not a stub */
}
-
-/* Return non-zero if the PC is inside a call thunk (aka stub or trampoline).
- This implements the IN_SOLIB_CALL_TRAMPOLINE macro. */
-
-static int
-mips_in_call_stub (CORE_ADDR pc, char *name)
-{
- CORE_ADDR start_addr;
-
- /* Find the starting address of the function containing the PC. If the
- caller didn't give us a name, look it up at the same time. */
- if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) ==
- 0)
- return 0;
-
- if (strncmp (name, "__mips16_call_stub_", 19) == 0)
- {
- /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub. */
- if (name[19] >= '0' && name[19] <= '9')
- return 1;
- /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub. */
- else if (name[19] == 's' || name[19] == 'd')
- return pc == start_addr;
- }
-
- return 0; /* not a stub */
-}
-
-
-/* Return non-zero if the PC is inside a return thunk (aka stub or
- trampoline). */
-
-static int
-mips_in_solib_return_trampoline (CORE_ADDR pc, char *name)
-{
- CORE_ADDR start_addr;
-
- /* Find the starting address of the function containing the PC. */
- if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0)
- return 0;
-
- /* If the PC is in __mips16_ret_{d,s}f, this is a return stub. */
- if (strcmp (name, "__mips16_ret_sf") == 0
- || strcmp (name, "__mips16_ret_df") == 0)
- return 1;
-
- /* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
- i.e. after the jal instruction, this is effectively a return stub. */
- if (strncmp (name, "__mips16_call_stub_", 19) == 0
- && (name[19] == 's' || name[19] == 'd') && pc != start_addr)
- return 1;
-
- return 0; /* not a stub */
-}
-
-
-/* Return non-zero if the PC is in a library helper function that
- should be ignored. This implements the
- DEPRECATED_IGNORE_HELPER_CALL macro. */
-
-int
-mips_ignore_helper (CORE_ADDR pc)
-{
- char *name;
-
- /* Find the starting address and name of the function containing the PC. */
- if (find_pc_partial_function (pc, &name, NULL, NULL) == 0)
- return 0;
-
- /* If the PC is in __mips16_ret_{d,s}f, this is a library helper function
- that we want to ignore. */
- return (strcmp (name, "__mips16_ret_sf") == 0
- || strcmp (name, "__mips16_ret_df") == 0);
-}
-
-
/* Convert a dbx stab register number (from `r' declaration) to a GDB
[1 * NUM_REGS .. 2 * NUM_REGS) REGNUM. */
guarenteed to be correctly sign extended. */
static CORE_ADDR
-mips_integer_to_address (struct type *type, void *buf)
+mips_integer_to_address (struct gdbarch *gdbarch,
+ struct type *type, const gdb_byte *buf)
{
- char *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr));
+ gdb_byte *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr));
LONGEST val = unpack_long (type, buf);
store_signed_integer (tmp, TYPE_LENGTH (builtin_type_void_data_ptr), val);
return extract_signed_integer (tmp,
else if (strcmp (name, ".mdebug.eabi64") == 0)
*abip = MIPS_ABI_EABI64;
else
- warning ("unsupported ABI %s.", name + 8);
+ warning (_("unsupported ABI %s."), name + 8);
}
static enum mips_abi
if (mips_abi_strings[i] == mips_abi_string)
return (enum mips_abi) i;
- internal_error (__FILE__, __LINE__, "unknown ABI string");
+ internal_error (__FILE__, __LINE__, _("unknown ABI string"));
}
static struct gdbarch *
&floatformat_n32n64_long_double_big);
break;
default:
- internal_error (__FILE__, __LINE__, "unknown ABI in switch");
+ internal_error (__FILE__, __LINE__, _("unknown ABI in switch"));
}
/* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE
set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_trampoline_code);
- /* NOTE drow/2004-02-11: We overload the core solib trampoline code
- to support MIPS16. This is a bad thing. Make sure not to do it
- if we have an OS ABI that actually supports shared libraries, since
- shared library support is more important. If we have an OS someday
- that supports both shared libraries and MIPS16, we'll have to find
- a better place for these. */
- if (info.osabi == GDB_OSABI_UNKNOWN)
- {
- set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub);
- set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_solib_return_trampoline);
- }
+ set_gdbarch_single_step_through_delay (gdbarch, mips_single_step_through_delay);
/* Hook in OS ABI-specific overrides, if they have been registered. */
gdbarch_init_osabi (info, gdbarch);
/* Print out which MIPS ABI is in use. */
static void
-show_mips_abi (char *ignore_args, int from_tty)
+show_mips_abi (struct ui_file *file,
+ int from_tty,
+ struct cmd_list_element *ignored_cmd,
+ const char *ignored_value)
{
if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_mips)
- printf_filtered
- ("The MIPS ABI is unknown because the current architecture is not MIPS.\n");
+ fprintf_filtered
+ (file,
+ "The MIPS ABI is unknown because the current architecture "
+ "is not MIPS.\n");
else
{
enum mips_abi global_abi = global_mips_abi ();
const char *actual_abi_str = mips_abi_strings[actual_abi];
if (global_abi == MIPS_ABI_UNKNOWN)
- printf_filtered
- ("The MIPS ABI is set automatically (currently \"%s\").\n",
+ fprintf_filtered
+ (file,
+ "The MIPS ABI is set automatically (currently \"%s\").\n",
actual_abi_str);
else if (global_abi == actual_abi)
- printf_filtered
- ("The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
+ fprintf_filtered
+ (file,
+ "The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
actual_abi_str);
else
{
/* Probably shouldn't happen... */
- printf_filtered
- ("The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
+ fprintf_filtered
+ (file,
+ "The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
actual_abi_str, mips_abi_strings[global_abi]);
}
}
fprintf_unfiltered (file,
"mips_dump_tdep: mips_stack_argsize() = %d\n",
mips_stack_argsize (current_gdbarch));
- fprintf_unfiltered (file,
- "mips_dump_tdep: ADDR_BITS_REMOVE # %s\n",
- XSTRING (ADDR_BITS_REMOVE (ADDR)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: ATTACH_DETACH # %s\n",
- XSTRING (ATTACH_DETACH));
- fprintf_unfiltered (file,
- "mips_dump_tdep: DWARF_REG_TO_REGNUM # %s\n",
- XSTRING (DWARF_REG_TO_REGNUM (REGNUM)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: ECOFF_REG_TO_REGNUM # %s\n",
- XSTRING (ECOFF_REG_TO_REGNUM (REGNUM)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n",
- FIRST_EMBED_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: DEPRECATED_IGNORE_HELPER_CALL # %s\n",
- XSTRING (DEPRECATED_IGNORE_HELPER_CALL (PC)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n",
- XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: LAST_EMBED_REGNUM = %d\n",
- LAST_EMBED_REGNUM);
-#ifdef MACHINE_CPROC_FP_OFFSET
- fprintf_unfiltered (file,
- "mips_dump_tdep: MACHINE_CPROC_FP_OFFSET = %d\n",
- MACHINE_CPROC_FP_OFFSET);
-#endif
-#ifdef MACHINE_CPROC_PC_OFFSET
- fprintf_unfiltered (file,
- "mips_dump_tdep: MACHINE_CPROC_PC_OFFSET = %d\n",
- MACHINE_CPROC_PC_OFFSET);
-#endif
-#ifdef MACHINE_CPROC_SP_OFFSET
- fprintf_unfiltered (file,
- "mips_dump_tdep: MACHINE_CPROC_SP_OFFSET = %d\n",
- MACHINE_CPROC_SP_OFFSET);
-#endif
- fprintf_unfiltered (file, "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_EFI_SYMBOL_NAME = multi-arch!!\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_LAST_ARG_REGNUM = %d (%d regs)\n",
- MIPS_LAST_ARG_REGNUM,
- MIPS_LAST_ARG_REGNUM - MIPS_A0_REGNUM + 1);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_NUMREGS = %d\n", MIPS_NUMREGS);
- fprintf_unfiltered (file,
- "mips_dump_tdep: mips_abi_regsize() = %d\n",
- mips_abi_regsize (current_gdbarch));
- fprintf_unfiltered (file,
- "mips_dump_tdep: PRID_REGNUM = %d\n", PRID_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FRAME_ADJUST = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FRAME_OFFSET = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_FRAME_REG = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_MASK = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_PC_REG = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_MASK = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_SYMBOL = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PS_REGNUM = %d\n", PS_REGNUM);
-#ifdef SAVED_BYTES
- fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_BYTES = %d\n", SAVED_BYTES);
-#endif
-#ifdef SAVED_FP
- fprintf_unfiltered (file, "mips_dump_tdep: SAVED_FP = %d\n", SAVED_FP);
-#endif
-#ifdef SAVED_PC
- fprintf_unfiltered (file, "mips_dump_tdep: SAVED_PC = %d\n", SAVED_PC);
-#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: SETUP_ARBITRARY_FRAME # %s\n",
- XSTRING (SETUP_ARBITRARY_FRAME (NUMARGS, ARGS)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: SOFTWARE_SINGLE_STEP # %s\n",
- XSTRING (SOFTWARE_SINGLE_STEP (SIG, BP_P)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P () = %d\n",
- SOFTWARE_SINGLE_STEP_P ());
- fprintf_unfiltered (file,
- "mips_dump_tdep: STAB_REG_TO_REGNUM # %s\n",
- XSTRING (STAB_REG_TO_REGNUM (REGNUM)));
-#ifdef STACK_END_ADDR
- fprintf_unfiltered (file,
- "mips_dump_tdep: STACK_END_ADDR = %d\n",
- STACK_END_ADDR);
-#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: STEP_SKIPS_DELAY # %s\n",
- XSTRING (STEP_SKIPS_DELAY (PC)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: STEP_SKIPS_DELAY_P = %d\n",
- STEP_SKIPS_DELAY_P);
- fprintf_unfiltered (file,
- "mips_dump_tdep: STOPPED_BY_WATCHPOINT # %s\n",
- XSTRING (STOPPED_BY_WATCHPOINT (WS)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: TABULAR_REGISTER_OUTPUT = used?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: TARGET_CAN_USE_HARDWARE_WATCHPOINT # %s\n",
- XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT
- (TYPE, CNT, OTHERTYPE)));
-#ifdef TRACE_CLEAR
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_CLEAR # %s\n",
- XSTRING (TRACE_CLEAR (THREAD, STATE)));
-#endif
-#ifdef TRACE_FLAVOR
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_FLAVOR = %d\n", TRACE_FLAVOR);
-#endif
-#ifdef TRACE_FLAVOR_SIZE
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_FLAVOR_SIZE = %d\n",
- TRACE_FLAVOR_SIZE);
-#endif
-#ifdef TRACE_SET
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_SET # %s\n",
- XSTRING (TRACE_SET (X, STATE)));
-#endif
-#ifdef UNUSED_REGNUM
- fprintf_unfiltered (file,
- "mips_dump_tdep: UNUSED_REGNUM = %d\n", UNUSED_REGNUM);
-#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: VM_MIN_ADDRESS = %ld\n",
- (long) VM_MIN_ADDRESS);
}
extern initialize_file_ftype _initialize_mips_tdep; /* -Wmissing-prototypes */
mips_abi_string = mips_abi_strings[MIPS_ABI_UNKNOWN];
if (MIPS_ABI_LAST + 1
!= sizeof (mips_abi_strings) / sizeof (mips_abi_strings[0]))
- internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync");
+ internal_error (__FILE__, __LINE__, _("mips_abi_strings out of sync"));
gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
/* Add root prefix command for all "set mips"/"show mips" commands */
add_prefix_cmd ("mips", no_class, set_mips_command,
- "Various MIPS specific commands.",
+ _("Various MIPS specific commands."),
&setmipscmdlist, "set mips ", 0, &setlist);
add_prefix_cmd ("mips", no_class, show_mips_command,
- "Various MIPS specific commands.",
+ _("Various MIPS specific commands."),
&showmipscmdlist, "show mips ", 0, &showlist);
/* Allow the user to override the saved register size. */
add_setshow_enum_cmd ("saved-gpreg-size", class_obscure,
- size_enums, &mips_abi_regsize_string, "\
-Set size of general purpose registers saved on the stack.\n", "\
-Show size of general purpose registers saved on the stack.\n", "\
+ size_enums, &mips_abi_regsize_string, _("\
+Set size of general purpose registers saved on the stack."), _("\
+Show size of general purpose registers saved on the stack."), _("\
This option can be set to one of:\n\
32 - Force GDB to treat saved GP registers as 32-bit\n\
64 - Force GDB to treat saved GP registers as 64-bit\n\
auto - Allow GDB to use the target's default setting or autodetect the\n\
- saved GP register size from information contained in the executable.\n\
- (default: auto)", "\
-Size of general purpose registers saved on the stack is %s.\n",
- NULL, NULL, &setmipscmdlist, &showmipscmdlist);
+ saved GP register size from information contained in the\n\
+ executable (default)."),
+ NULL,
+ NULL, /* FIXME: i18n: Size of general purpose registers saved on the stack is %s. */
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to override the argument stack size. */
add_setshow_enum_cmd ("stack-arg-size", class_obscure,
- size_enums, &mips_stack_argsize_string, "\
-Set the amount of stack space reserved for each argument.\n", "\
-Show the amount of stack space reserved for each argument.\n", "\
+ size_enums, &mips_stack_argsize_string, _("\
+Set the amount of stack space reserved for each argument."), _("\
+Show the amount of stack space reserved for each argument."), _("\
This option can be set to one of:\n\
32 - Force GDB to allocate 32-bit chunks per argument\n\
64 - Force GDB to allocate 64-bit chunks per argument\n\
auto - Allow GDB to determine the correct setting from the current\n\
- target and executable (default)", "\
-The amount of stack space reserved for each argument is %s.\n",
- NULL, NULL, &setmipscmdlist, &showmipscmdlist);
+ target and executable (default)"),
+ NULL,
+ NULL, /* FIXME: i18n: The amount of stack space reserved for each argument is %s. */
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to override the ABI. */
- c = add_set_enum_cmd
- ("abi", class_obscure, mips_abi_strings, &mips_abi_string,
- "Set the ABI used by this program.\n"
- "This option can be set to one of:\n"
- " auto - the default ABI associated with the current binary\n"
- " o32\n"
- " o64\n" " n32\n" " n64\n" " eabi32\n" " eabi64", &setmipscmdlist);
- set_cmd_sfunc (c, mips_abi_update);
- add_cmd ("abi", class_obscure, show_mips_abi,
- "Show ABI in use by MIPS target", &showmipscmdlist);
+ add_setshow_enum_cmd ("abi", class_obscure, mips_abi_strings,
+ &mips_abi_string, _("\
+Set the MIPS ABI used by this program."), _("\
+Show the MIPS ABI used by this program."), _("\
+This option can be set to one of:\n\
+ auto - the default ABI associated with the current binary\n\
+ o32\n\
+ o64\n\
+ n32\n\
+ n64\n\
+ eabi32\n\
+ eabi64"),
+ mips_abi_update,
+ show_mips_abi,
+ &setmipscmdlist, &showmipscmdlist);
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command,
- "Set use of MIPS floating-point coprocessor.",
+ _("Set use of MIPS floating-point coprocessor."),
&mipsfpulist, "set mipsfpu ", 0, &setlist);
add_cmd ("single", class_support, set_mipsfpu_single_command,
- "Select single-precision MIPS floating-point coprocessor.",
+ _("Select single-precision MIPS floating-point coprocessor."),
&mipsfpulist);
add_cmd ("double", class_support, set_mipsfpu_double_command,
- "Select double-precision MIPS floating-point coprocessor.",
+ _("Select double-precision MIPS floating-point coprocessor."),
&mipsfpulist);
add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
add_cmd ("none", class_support, set_mipsfpu_none_command,
- "Select no MIPS floating-point coprocessor.", &mipsfpulist);
+ _("Select no MIPS floating-point coprocessor."), &mipsfpulist);
add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
add_cmd ("auto", class_support, set_mipsfpu_auto_command,
- "Select MIPS floating-point coprocessor automatically.",
+ _("Select MIPS floating-point coprocessor automatically."),
&mipsfpulist);
add_cmd ("mipsfpu", class_support, show_mipsfpu_command,
- "Show current use of MIPS floating-point coprocessor target.",
+ _("Show current use of MIPS floating-point coprocessor target."),
&showlist);
/* We really would like to have both "0" and "unlimited" work, but
command.c doesn't deal with that. So make it a var_zinteger
because the user can always use "999999" or some such for unlimited. */
add_setshow_zinteger_cmd ("heuristic-fence-post", class_support,
- &heuristic_fence_post, "\
-Set the distance searched for the start of a function.\n", "\
-Show the distance searched for the start of a function.\n", "\
+ &heuristic_fence_post, _("\
+Set the distance searched for the start of a function."), _("\
+Show the distance searched for the start of a function."), _("\
If you are debugging a stripped executable, GDB needs to search through the\n\
program for the start of a function. This command sets the distance of the\n\
-search. The only need to set it is when debugging a stripped executable.", "\
-The distance searched for the start of a function is %s.\n",
- reinit_frame_cache_sfunc, NULL,
+search. The only need to set it is when debugging a stripped executable."),
+ reinit_frame_cache_sfunc,
+ NULL, /* FIXME: i18n: The distance searched for the start of a function is %s. */
&setlist, &showlist);
/* Allow the user to control whether the upper bits of 64-bit
addresses should be zeroed. */
- add_setshow_auto_boolean_cmd ("mask-address", no_class, &mask_address_var, "\
-Set zeroing of upper 32 bits of 64-bit addresses.", "\
-Show zeroing of upper 32 bits of 64-bit addresses.", "\
+ add_setshow_auto_boolean_cmd ("mask-address", no_class,
+ &mask_address_var, _("\
+Set zeroing of upper 32 bits of 64-bit addresses."), _("\
+Show zeroing of upper 32 bits of 64-bit addresses."), _("\
Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\
-allow GDB to determine the correct value.\n", "\
-Zerroing of upper 32 bits of 64-bit address is %s.",
- NULL, show_mask_address, &setmipscmdlist, &showmipscmdlist);
+allow GDB to determine the correct value."),
+ NULL, show_mask_address,
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to control the size of 32 bit registers within the
raw remote packet. */
add_setshow_boolean_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
- &mips64_transfers_32bit_regs_p, "\
-Set compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
-Show compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
+ &mips64_transfers_32bit_regs_p, _("\
+Set compatibility with 64-bit MIPS target that transfers 32-bit quantities."),
+ _("\
+Show compatibility with 64-bit MIPS target that transfers 32-bit quantities."),
+ _("\
Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
-64 bits for others. Use \"off\" to disable compatibility mode", "\
-Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s.",
- set_mips64_transfers_32bit_regs, NULL, &setlist, &showlist);
+64 bits for others. Use \"off\" to disable compatibility mode"),
+ set_mips64_transfers_32bit_regs,
+ NULL, /* FIXME: i18n: Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s. */
+ &setlist, &showlist);
/* Debug this files internals. */
add_setshow_zinteger_cmd ("mips", class_maintenance,
- &mips_debug, "\
-Set mips debugging.\n", "\
-Show mips debugging.\n", "\
-When non-zero, mips specific debugging is enabled.\n", "\
-Mips debugging is currently %s.\n",
- NULL, NULL,
+ &mips_debug, _("\
+Set mips debugging."), _("\
+Show mips debugging."), _("\
+When non-zero, mips specific debugging is enabled."),
+ NULL,
+ NULL, /* FIXME: i18n: Mips debugging is currently %s. */
&setdebuglist, &showdebuglist);
}