/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
- Foundation, Inc.
+ Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "gdb_string.h"
static struct type *mips_register_type (struct gdbarch *gdbarch, int regnum);
-/* A useful bit in the CP0 status register (PS_REGNUM). */
+/* A useful bit in the CP0 status register (MIPS_PS_REGNUM). */
/* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */
#define ST0_FR (1 << 26)
NULL
};
-struct frame_extra_info
-{
- mips_extra_func_info_t proc_desc;
- int num_args;
-};
-
/* Various MIPS ISA options (related to stack analysis) can be
overridden dynamically. Establish an enum/array for managing
them. */
static int
n32n64_floatformat_always_valid (const struct floatformat *fmt,
- const char *from)
+ const void *from)
{
return 1;
}
return ((addr) & 1);
}
-static CORE_ADDR
-make_mips16_addr (CORE_ADDR addr)
-{
- return ((addr) | 1);
-}
-
static CORE_ADDR
unmake_mips16_addr (CORE_ADDR addr)
{
static const char *mips_abi_regsize_string = size_auto;
-static unsigned int
+unsigned int
mips_abi_regsize (struct gdbarch *gdbarch)
{
if (mips_abi_regsize_string == size_auto)
case MIPS_ABI_UNKNOWN:
case MIPS_ABI_LAST:
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
else if (mips_abi_regsize_string == size_64)
return 8;
static void
mips_xfer_register (struct regcache *regcache, int reg_num, int length,
- enum bfd_endian endian, bfd_byte * in,
- const bfd_byte * out, int buf_offset)
+ enum bfd_endian endian, gdb_byte *in,
+ const gdb_byte *out, int buf_offset)
{
int reg_offset = 0;
gdb_assert (reg_num >= NUM_REGS);
reg_offset = 0;
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
if (mips_debug)
fprintf_unfiltered (gdb_stderr,
/* Otherwise check the FR bit in the status register - it controls
the FP compatiblity mode. If it is clear we are in compatibility
mode. */
- if ((read_register (PS_REGNUM) & ST0_FR) == 0)
+ if ((read_register (MIPS_PS_REGNUM) & ST0_FR) == 0)
return 1;
#endif
#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
-struct mips_frame_cache;
-static mips_extra_func_info_t heuristic_proc_desc (CORE_ADDR, CORE_ADDR,
- struct frame_info *,
- struct mips_frame_cache *);
-static mips_extra_func_info_t non_heuristic_proc_desc (CORE_ADDR pc,
- CORE_ADDR *addrptr);
-
static CORE_ADDR heuristic_proc_start (CORE_ADDR);
static CORE_ADDR read_next_frame_reg (struct frame_info *, int);
static void reinit_frame_cache_sfunc (char *, int, struct cmd_list_element *);
-static CORE_ADDR after_prologue (CORE_ADDR pc);
-
static struct type *mips_float_register_type (void);
static struct type *mips_double_register_type (void);
}
else
internal_error (__FILE__, __LINE__,
- "mips_register_name: bad register number %d", rawnum);
+ _("mips_register_name: bad register number %d"), rawnum);
}
/* Return the groups that a MIPS register can be categorised into. */
static void
mips_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
- int cookednum, void *buf)
+ int cookednum, gdb_byte *buf)
{
int rawnum = cookednum % NUM_REGS;
gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
regcache_raw_read_part (regcache, rawnum, 4, 4, buf);
}
else
- internal_error (__FILE__, __LINE__, "bad register size");
+ internal_error (__FILE__, __LINE__, _("bad register size"));
}
static void
mips_pseudo_register_write (struct gdbarch *gdbarch,
struct regcache *regcache, int cookednum,
- const void *buf)
+ const gdb_byte *buf)
{
int rawnum = cookednum % NUM_REGS;
gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
regcache_raw_write_part (regcache, rawnum, 4, 4, buf);
}
else
- internal_error (__FILE__, __LINE__, "bad register size");
+ internal_error (__FILE__, __LINE__, _("bad register size"));
}
/* Table to translate MIPS16 register field to actual register number. */
static unsigned int heuristic_fence_post = 0;
-#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
-#define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */
-#define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset)
-#define PROC_FRAME_REG(proc) ((proc)->pdr.framereg)
-#define PROC_FRAME_ADJUST(proc) ((proc)->frame_adjust)
-#define PROC_REG_MASK(proc) ((proc)->pdr.regmask)
-#define PROC_FREG_MASK(proc) ((proc)->pdr.fregmask)
-#define PROC_REG_OFFSET(proc) ((proc)->pdr.regoffset)
-#define PROC_FREG_OFFSET(proc) ((proc)->pdr.fregoffset)
-#define PROC_PC_REG(proc) ((proc)->pdr.pcreg)
-/* FIXME drow/2002-06-10: If a pointer on the host is bigger than a long,
- this will corrupt pdr.iline. Fortunately we don't use it. */
-#define PROC_SYMBOL(proc) (*(struct symbol**)&(proc)->pdr.isym)
-#define _PROC_MAGIC_ 0x0F0F0F0F
-
/* Number of bytes of storage in the actual machine representation for
register N. NOTE: This defines the pseudo register type so need to
rebuild the architecture vector. */
if (!gdbarch_update_p (info))
{
mips64_transfers_32bit_regs_p = 0;
- error ("32-bit compatibility mode not supported");
+ error (_("32-bit compatibility mode not supported"));
}
}
static void
mips_register_to_value (struct frame_info *frame, int regnum,
- struct type *type, void *to)
+ struct type *type, gdb_byte *to)
{
- get_frame_register (frame, regnum + 0, (char *) to + 4);
- get_frame_register (frame, regnum + 1, (char *) to + 0);
+ get_frame_register (frame, regnum + 0, to + 4);
+ get_frame_register (frame, regnum + 1, to + 0);
}
static void
mips_value_to_register (struct frame_info *frame, int regnum,
- struct type *type, const void *from)
+ struct type *type, const gdb_byte *from)
{
- put_frame_register (frame, regnum + 0, (const char *) from + 4);
- put_frame_register (frame, regnum + 1, (const char *) from + 0);
+ put_frame_register (frame, regnum + 0, from + 4);
+ put_frame_register (frame, regnum + 1, from + 0);
}
/* Return the GDB type object for the "standard" data type of data in
return builtin_type_ieee_double_little;
case BFD_ENDIAN_UNKNOWN:
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
}
else if (regnum < NUM_REGS)
the ABI (with a few complications). */
if (regnum >= (NUM_REGS
+ mips_regnum (current_gdbarch)->fp_control_status)
- && regnum <= NUM_REGS + LAST_EMBED_REGNUM)
+ && regnum <= NUM_REGS + MIPS_LAST_EMBED_REGNUM)
/* The pseudo/cooked view of the embedded registers is always
32-bit. The raw view is handled below. */
return builtin_type_int32;
case AUTO_BOOLEAN_AUTO:
return tdep->default_mask_address_p;
default:
- internal_error (__FILE__, __LINE__, "mips_mask_address_p: bad switch");
+ internal_error (__FILE__, __LINE__, _("mips_mask_address_p: bad switch"));
return -1;
}
}
static void
-show_mask_address (char *cmd, int from_tty, struct cmd_list_element *c)
+show_mask_address (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ deprecated_show_value_hack (file, from_tty, c, value);
switch (mask_address_var)
{
case AUTO_BOOLEAN_TRUE:
mips_mask_address_p (tdep) ? "enabled" : "disabled");
break;
default:
- internal_error (__FILE__, __LINE__, "show_mask_address: bad switch");
+ internal_error (__FILE__, __LINE__, _("show_mask_address: bad switch"));
break;
}
}
/* Tell if the program counter value in MEMADDR is in a MIPS16 function. */
-static int
-pc_is_mips16 (bfd_vma memaddr)
+int
+mips_pc_is_mips16 (CORE_ADDR memaddr)
{
struct minimal_symbol *sym;
write_register_pid (mips_regnum (current_gdbarch)->pc, pc, ptid);
}
-/* This returns the PC of the first inst after the prologue. If we can't
- find the prologue, then return 0. */
-
-static CORE_ADDR
-after_prologue (CORE_ADDR pc)
-{
- mips_extra_func_info_t proc_desc;
- struct symtab_and_line sal;
- CORE_ADDR func_addr, func_end;
- CORE_ADDR startaddr = 0;
-
- /* Pass a NULL next_frame to heuristic_proc_desc. We should not
- attempt to read the stack pointer from the current machine state,
- because the current machine state has nothing to do with the
- information we need from the proc_desc; and the process may or
- may not exist right now. */
- proc_desc = non_heuristic_proc_desc (pc, &startaddr);
- if (proc_desc)
- {
- /* IF this is the topmost frame AND (this proc does not have
- debugging information OR the PC is in the procedure prologue)
- THEN create a "heuristic" proc_desc (by analyzing the actual
- code) to replace the "official" proc_desc. */
- struct symtab_and_line val;
- if (PROC_SYMBOL (proc_desc))
- {
- val = find_pc_line (BLOCK_START
- (SYMBOL_BLOCK_VALUE (PROC_SYMBOL (proc_desc))),
- 0);
- val.pc = val.end ? val.end : pc;
- }
- if (!PROC_SYMBOL (proc_desc) || pc < val.pc)
- {
- mips_extra_func_info_t found_heuristic =
- heuristic_proc_desc (PROC_LOW_ADDR (proc_desc), pc, NULL, NULL);
- if (found_heuristic)
- proc_desc = found_heuristic;
- }
- }
- else
- {
- if (startaddr == 0)
- startaddr = heuristic_proc_start (pc);
-
- proc_desc = heuristic_proc_desc (startaddr, pc, NULL, NULL);
- }
-
- if (proc_desc)
- {
- /* If function is frameless, then we need to do it the hard way. I
- strongly suspect that frameless always means prologueless... */
- if (PROC_FRAME_REG (proc_desc) == MIPS_SP_REGNUM
- && PROC_FRAME_OFFSET (proc_desc) == 0)
- return 0;
- }
-
- if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
- return 0; /* Unknown */
-
- sal = find_pc_line (func_addr, 0);
-
- if (sal.end < func_end)
- return sal.end;
-
- /* The line after the prologue is after the end of the function. In this
- case, tell the caller to find the prologue the hard way. */
-
- return 0;
-}
-
/* Fetch and return instruction from the specified location. If the PC
is odd, assume it's a MIPS16 instruction; otherwise MIPS32. */
-static t_inst
+static ULONGEST
mips_fetch_instruction (CORE_ADDR addr)
{
- char buf[MIPS32_INSN_SIZE];
+ gdb_byte buf[MIPS_INSN32_SIZE];
int instlen;
int status;
- if (pc_is_mips16 (addr))
+ if (mips_pc_is_mips16 (addr))
{
- instlen = MIPS16_INSN_SIZE;
+ instlen = MIPS_INSN16_SIZE;
addr = unmake_mips16_addr (addr);
}
else
- instlen = MIPS32_INSN_SIZE;
+ instlen = MIPS_INSN32_SIZE;
status = deprecated_read_memory_nobpt (addr, buf, instlen);
if (status)
memory_error (status, addr);
return extract_unsigned_integer (buf, instlen);
}
-static ULONGEST
-mips16_fetch_instruction (CORE_ADDR addr)
-{
- char buf[MIPS16_INSN_SIZE];
- int status;
-
- addr = unmake_mips16_addr (addr);
- status = deprecated_read_memory_nobpt (addr, buf, sizeof (buf));
- if (status)
- memory_error (status, addr);
- return extract_unsigned_integer (buf, sizeof (buf));
-}
-
/* These the fields of 32 bit mips instructions */
#define mips32_op(x) (x >> 26)
#define itype_op(x) (x >> 26)
#define rtype_shamt(x) ((x >> 6) & 0x1f)
#define rtype_funct(x) (x & 0x3f)
-static CORE_ADDR
-mips32_relative_offset (unsigned long inst)
+static LONGEST
+mips32_relative_offset (ULONGEST inst)
{
- long x;
- x = itype_immediate (inst);
- if (x & 0x8000) /* sign bit set */
- {
- x |= 0xffff0000; /* sign extension */
- }
- x = x << 2;
- return x;
+ return ((itype_immediate (inst) ^ 0x8000) - 0x8000) << 2;
}
/* Determine whate to set a single step breakpoint while considering
static unsigned int
fetch_mips_16 (CORE_ADDR pc)
{
- char buf[8];
+ gdb_byte buf[8];
pc &= 0xfffffffe; /* clear the low order bit */
target_read_memory (pc, buf, 2);
return extract_unsigned_integer (buf, 2);
break;
}
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
upk->offset = offset;
upk->regx = regx;
struct trad_frame_saved_reg *saved_regs;
};
-
-static struct mips_frame_cache *
-mips_mdebug_frame_cache (struct frame_info *next_frame, void **this_cache)
-{
- CORE_ADDR startaddr = 0;
- mips_extra_func_info_t proc_desc;
- struct mips_frame_cache *cache;
- struct gdbarch *gdbarch = get_frame_arch (next_frame);
- struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- /* r0 bit means kernel trap */
- int kernel_trap;
- /* What registers have been saved? Bitmasks. */
- unsigned long gen_mask, float_mask;
-
- if ((*this_cache) != NULL)
- return (*this_cache);
- cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
- (*this_cache) = cache;
- cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
-
- /* Get the mdebug proc descriptor. */
- proc_desc = non_heuristic_proc_desc (frame_pc_unwind (next_frame),
- &startaddr);
- /* Must be true. This is only called when the sniffer detected a
- proc descriptor. */
- gdb_assert (proc_desc != NULL);
-
- /* Extract the frame's base. */
- cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
- + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
-
- kernel_trap = PROC_REG_MASK (proc_desc) & 1;
- gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
- float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
-
- /* Must be true. The in_prologue case is left for the heuristic
- unwinder. This is always used on kernel traps. */
- gdb_assert (!in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc))
- || kernel_trap);
-
- /* Fill in the offsets for the registers which gen_mask says were
- saved. */
- {
- CORE_ADDR reg_position = (cache->base + PROC_REG_OFFSET (proc_desc));
- int ireg;
-
- for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
- if (gen_mask & 0x80000000)
- {
- cache->saved_regs[NUM_REGS + ireg].addr = reg_position;
- reg_position -= mips_abi_regsize (gdbarch);
- }
- }
-
- /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse
- order of that normally used by gcc. Therefore, we have to fetch
- the first instruction of the function, and if it's an entry
- instruction that saves $s0 or $s1, correct their saved addresses. */
- if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
- {
- ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc));
- if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
- /* entry */
- {
- int reg;
- int sreg_count = (inst >> 6) & 3;
-
- /* Check if the ra register was pushed on the stack. */
- CORE_ADDR reg_position = (cache->base
- + PROC_REG_OFFSET (proc_desc));
- if (inst & 0x20)
- reg_position -= mips_abi_regsize (gdbarch);
-
- /* Check if the s0 and s1 registers were pushed on the
- stack. */
- /* NOTE: cagney/2004-02-08: Huh? This is doing no such
- check. */
- for (reg = 16; reg < sreg_count + 16; reg++)
- {
- cache->saved_regs[NUM_REGS + reg].addr = reg_position;
- reg_position -= mips_abi_regsize (gdbarch);
- }
- }
- }
-
- /* Fill in the offsets for the registers which float_mask says were
- saved. */
- {
- CORE_ADDR reg_position = (cache->base
- + PROC_FREG_OFFSET (proc_desc));
- int ireg;
- /* Fill in the offsets for the float registers which float_mask
- says were saved. */
- for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
- if (float_mask & 0x80000000)
- {
- if (mips_abi_regsize (gdbarch) == 4
- && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- {
- /* On a big endian 32 bit ABI, floating point registers
- are paired to form doubles such that the most
- significant part is in $f[N+1] and the least
- significant in $f[N] vis: $f[N+1] ||| $f[N]. The
- registers are also spilled as a pair and stored as a
- double.
-
- When little-endian the least significant part is
- stored first leading to the memory order $f[N] and
- then $f[N+1].
-
- Unfortunately, when big-endian the most significant
- part of the double is stored first, and the least
- significant is stored second. This leads to the
- registers being ordered in memory as firt $f[N+1] and
- then $f[N].
-
- For the big-endian case make certain that the
- addresses point at the correct (swapped) locations
- $f[N] and $f[N+1] pair (keep in mind that
- reg_position is decremented each time through the
- loop). */
- if ((ireg & 1))
- cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
- .addr = reg_position - mips_abi_regsize (gdbarch);
- else
- cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
- .addr = reg_position + mips_abi_regsize (gdbarch);
- }
- else
- cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
- .addr = reg_position;
- reg_position -= mips_abi_regsize (gdbarch);
- }
-
- cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc]
- = cache->saved_regs[NUM_REGS + MIPS_RA_REGNUM];
- }
-
- /* SP_REGNUM, contains the value and not the address. */
- trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
-
- return (*this_cache);
-}
-
-static void
-mips_mdebug_frame_this_id (struct frame_info *next_frame, void **this_cache,
- struct frame_id *this_id)
-{
- struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
- this_cache);
- (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
-}
-
-static void
-mips_mdebug_frame_prev_register (struct frame_info *next_frame,
- void **this_cache,
- int regnum, int *optimizedp,
- enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
-{
- struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
- this_cache);
- trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
- optimizedp, lvalp, addrp, realnump, valuep);
-}
-
-static const struct frame_unwind mips_mdebug_frame_unwind =
-{
- NORMAL_FRAME,
- mips_mdebug_frame_this_id,
- mips_mdebug_frame_prev_register
-};
-
-static const struct frame_unwind *
-mips_mdebug_frame_sniffer (struct frame_info *next_frame)
-{
- CORE_ADDR pc = frame_pc_unwind (next_frame);
- CORE_ADDR startaddr = 0;
- mips_extra_func_info_t proc_desc;
- int kernel_trap;
-
- /* Only use the mdebug frame unwinder on mdebug frames where all the
- registers have been saved. Leave hard cases such as no mdebug or
- in prologue for the heuristic unwinders. */
-
- proc_desc = non_heuristic_proc_desc (pc, &startaddr);
- if (proc_desc == NULL)
- return NULL;
-
- /* Not sure exactly what kernel_trap means, but if it means the
- kernel saves the registers without a prologue doing it, we better
- not examine the prologue to see whether registers have been saved
- yet. */
- kernel_trap = PROC_REG_MASK (proc_desc) & 1;
- if (kernel_trap)
- return &mips_mdebug_frame_unwind;
-
- /* In any frame other than the innermost or a frame interrupted by a
- signal, we assume that all registers have been saved. This
- assumes that all register saves in a function happen before the
- first function call. */
- if (!in_prologue (pc, PROC_LOW_ADDR (proc_desc)))
- return &mips_mdebug_frame_unwind;
-
- return NULL;
-}
-
-static CORE_ADDR
-mips_mdebug_frame_base_address (struct frame_info *next_frame,
- void **this_cache)
-{
- struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
- this_cache);
- return info->base;
-}
-
-static const struct frame_base mips_mdebug_frame_base = {
- &mips_mdebug_frame_unwind,
- mips_mdebug_frame_base_address,
- mips_mdebug_frame_base_address,
- mips_mdebug_frame_base_address
-};
-
-static const struct frame_base *
-mips_mdebug_frame_base_sniffer (struct frame_info *next_frame)
-{
- if (mips_mdebug_frame_sniffer (next_frame) != NULL)
- return &mips_mdebug_frame_base;
- else
- return NULL;
-}
-
/* Set a register's saved stack address in temp_saved_regs. If an
address has already been set for this register, do nothing; this
way we will only recognize the first save of a given register in a
if (limit_pc > start_pc + 200)
limit_pc = start_pc + 200;
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSN_SIZE)
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSN16_SIZE)
{
/* Save the previous instruction. If it's an EXTEND, we'll extract
the immediate offset extension from it in mips16_get_imm. */
over the extend. */
if ((inst & 0xf800) == 0xf000) /* extend */
{
- extend_bytes = MIPS16_INSN_SIZE;
+ extend_bytes = MIPS_INSN16_SIZE;
continue;
}
&& (inst & 0x700) != 0x700) /* entry */
entry_inst = inst; /* save for later processing */
else if ((inst & 0xf800) == 0x1800) /* jal(x) */
- cur_pc += MIPS16_INSN_SIZE; /* 32-bit instruction */
+ cur_pc += MIPS_INSN16_SIZE; /* 32-bit instruction */
else if ((inst & 0xff1c) == 0x6704) /* move reg,$a0-$a3 */
{
/* This instruction is part of the prologue, but we don't
void **this_cache,
int regnum, int *optimizedp,
enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
+ int *realnump, gdb_byte *valuep)
{
struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
this_cache);
mips_insn16_frame_sniffer (struct frame_info *next_frame)
{
CORE_ADDR pc = frame_pc_unwind (next_frame);
- if (pc_is_mips16 (pc))
+ if (mips_pc_is_mips16 (pc))
return &mips_insn16_frame_unwind;
return NULL;
}
restart:
frame_offset = 0;
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS32_INSN_SIZE)
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSN32_SIZE)
{
unsigned long inst, high_word, low_word;
int reg;
|| high_word == 0x3408 /* ori $t0,$zero,n */
))
{
- load_immediate_bytes += MIPS32_INSN_SIZE; /* FIXME! */
+ load_immediate_bytes += MIPS_INSN32_SIZE; /* FIXME! */
}
else
{
void **this_cache,
int regnum, int *optimizedp,
enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
+ int *realnump, gdb_byte *valuep)
{
struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
this_cache);
mips_insn32_frame_sniffer (struct frame_info *next_frame)
{
CORE_ADDR pc = frame_pc_unwind (next_frame);
- if (! pc_is_mips16 (pc))
+ if (! mips_pc_is_mips16 (pc))
return &mips_insn32_frame_unwind;
return NULL;
}
void **this_cache,
int regnum, int *optimizedp,
enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *valuep)
+ int *realnump, gdb_byte *valuep)
{
struct trad_frame_cache *this_trad_cache
= mips_stub_frame_cache (next_frame, this_cache);
static const struct frame_unwind *
mips_stub_frame_sniffer (struct frame_info *next_frame)
{
+ struct obj_section *s;
CORE_ADDR pc = frame_pc_unwind (next_frame);
+
if (in_plt_section (pc, NULL))
return &mips_stub_frame_unwind;
- else
- return NULL;
+
+ /* Binutils for MIPS puts lazy resolution stubs into .MIPS.stubs. */
+ s = find_pc_section (pc);
+
+ if (s != NULL
+ && strcmp (bfd_get_section_name (s->objfile->obfd, s->the_bfd_section),
+ ".MIPS.stubs") == 0)
+ return &mips_stub_frame_unwind;
+
+ return NULL;
}
static CORE_ADDR
target_remove_breakpoint (next_pc, break_mem);
}
-static struct mips_extra_func_info temp_proc_desc;
-
/* Test whether the PC points to the return instruction at the
end of a function. */
static int
mips_about_to_return (CORE_ADDR pc)
{
- if (pc_is_mips16 (pc))
+ if (mips_pc_is_mips16 (pc))
/* This mips16 case isn't necessarily reliable. Sometimes the compiler
generates a "jr $ra"; other times it generates code to load
the return address from the stack to an accessible register (such
if (heuristic_fence_post == UINT_MAX || fence < VM_MIN_ADDRESS)
fence = VM_MIN_ADDRESS;
- instlen = pc_is_mips16 (pc) ? MIPS16_INSN_SIZE : MIPS32_INSN_SIZE;
+ instlen = mips_pc_is_mips16 (pc) ? MIPS_INSN16_SIZE : MIPS_INSN32_SIZE;
/* search back for previous return */
for (start_pc -= instlen;; start_pc -= instlen)
{
static int blurb_printed = 0;
- warning ("GDB can't find the start of the function at 0x%s.",
+ warning (_("GDB can't find the start of the function at 0x%s."),
paddr_nz (pc));
if (!blurb_printed)
return 0;
}
- else if (pc_is_mips16 (start_pc))
+ else if (mips_pc_is_mips16 (start_pc))
{
unsigned short inst;
else if (mips_about_to_return (start_pc))
{
/* Skip return and its delay slot. */
- start_pc += 2 * MIPS32_INSN_SIZE;
+ start_pc += 2 * MIPS_INSN32_SIZE;
break;
}
return start_pc;
}
-static mips_extra_func_info_t
-heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
- struct frame_info *next_frame,
- struct mips_frame_cache *this_cache)
-{
- if (start_pc == 0)
- return NULL;
-
- memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc));
- PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
- PROC_FRAME_REG (&temp_proc_desc) = MIPS_SP_REGNUM;
- PROC_PC_REG (&temp_proc_desc) = MIPS_RA_REGNUM;
-
- if (pc_is_mips16 (start_pc))
- mips16_scan_prologue (start_pc, limit_pc, next_frame, this_cache);
- else
- mips32_scan_prologue (start_pc, limit_pc, next_frame, this_cache);
-
- return &temp_proc_desc;
-}
-
struct mips_objfile_private
{
bfd_size_type size;
char *contents;
};
-/* Global used to communicate between non_heuristic_proc_desc and
- compare_pdr_entries within qsort (). */
-static bfd *the_bfd;
-
-static int
-compare_pdr_entries (const void *a, const void *b)
-{
- CORE_ADDR lhs = bfd_get_32 (the_bfd, (bfd_byte *) a);
- CORE_ADDR rhs = bfd_get_32 (the_bfd, (bfd_byte *) b);
-
- if (lhs < rhs)
- return -1;
- else if (lhs == rhs)
- return 0;
- else
- return 1;
-}
-
-static mips_extra_func_info_t
-non_heuristic_proc_desc (CORE_ADDR pc, CORE_ADDR *addrptr)
-{
- CORE_ADDR startaddr;
- mips_extra_func_info_t proc_desc;
- struct block *b = block_for_pc (pc);
- struct symbol *sym;
- struct obj_section *sec;
- struct mips_objfile_private *priv;
-
- find_pc_partial_function (pc, NULL, &startaddr, NULL);
- if (addrptr)
- *addrptr = startaddr;
-
- priv = NULL;
-
- sec = find_pc_section (pc);
- if (sec != NULL)
- {
- priv = (struct mips_objfile_private *) objfile_data (sec->objfile, mips_pdr_data);
-
- /* Search the ".pdr" section generated by GAS. This includes most of
- the information normally found in ECOFF PDRs. */
-
- the_bfd = sec->objfile->obfd;
- if (priv == NULL
- && (the_bfd->format == bfd_object
- && bfd_get_flavour (the_bfd) == bfd_target_elf_flavour
- && elf_elfheader (the_bfd)->e_ident[EI_CLASS] == ELFCLASS64))
- {
- /* Right now GAS only outputs the address as a four-byte sequence.
- This means that we should not bother with this method on 64-bit
- targets (until that is fixed). */
-
- priv = obstack_alloc (&sec->objfile->objfile_obstack,
- sizeof (struct mips_objfile_private));
- priv->size = 0;
- set_objfile_data (sec->objfile, mips_pdr_data, priv);
- }
- else if (priv == NULL)
- {
- asection *bfdsec;
-
- priv = obstack_alloc (&sec->objfile->objfile_obstack,
- sizeof (struct mips_objfile_private));
-
- bfdsec = bfd_get_section_by_name (sec->objfile->obfd, ".pdr");
- if (bfdsec != NULL)
- {
- priv->size = bfd_section_size (sec->objfile->obfd, bfdsec);
- priv->contents = obstack_alloc (&sec->objfile->objfile_obstack,
- priv->size);
- bfd_get_section_contents (sec->objfile->obfd, bfdsec,
- priv->contents, 0, priv->size);
-
- /* In general, the .pdr section is sorted. However, in the
- presence of multiple code sections (and other corner cases)
- it can become unsorted. Sort it so that we can use a faster
- binary search. */
- qsort (priv->contents, priv->size / 32, 32,
- compare_pdr_entries);
- }
- else
- priv->size = 0;
-
- set_objfile_data (sec->objfile, mips_pdr_data, priv);
- }
- the_bfd = NULL;
-
- if (priv->size != 0)
- {
- int low, mid, high;
- char *ptr;
- CORE_ADDR pdr_pc;
-
- low = 0;
- high = priv->size / 32;
-
- /* We've found a .pdr section describing this objfile. We want to
- find the entry which describes this code address. The .pdr
- information is not very descriptive; we have only a function
- start address. We have to look for the closest entry, because
- the local symbol at the beginning of this function may have
- been stripped - so if we ask the symbol table for the start
- address we may get a preceding global function. */
-
- /* First, find the last .pdr entry starting at or before PC. */
- do
- {
- mid = (low + high) / 2;
-
- ptr = priv->contents + mid * 32;
- pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
- pdr_pc += ANOFFSET (sec->objfile->section_offsets,
- SECT_OFF_TEXT (sec->objfile));
-
- if (pdr_pc > pc)
- high = mid;
- else
- low = mid + 1;
- }
- while (low != high);
-
- /* Both low and high point one past the PDR of interest. If
- both are zero, that means this PC is before any region
- covered by a PDR, i.e. pdr_pc for the first PDR entry is
- greater than PC. */
- if (low > 0)
- {
- ptr = priv->contents + (low - 1) * 32;
- pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
- pdr_pc += ANOFFSET (sec->objfile->section_offsets,
- SECT_OFF_TEXT (sec->objfile));
- }
-
- /* We don't have a range, so we have no way to know for sure
- whether we're in the correct PDR or a PDR for a preceding
- function and the current function was a stripped local
- symbol. But if the PDR's PC is at least as great as the
- best guess from the symbol table, assume that it does cover
- the right area; if a .pdr section is present at all then
- nearly every function will have an entry. The biggest exception
- will be the dynamic linker stubs; conveniently these are
- placed before .text instead of after. */
-
- if (pc >= pdr_pc && pdr_pc >= startaddr)
- {
- struct symbol *sym = find_pc_function (pc);
-
- if (addrptr)
- *addrptr = pdr_pc;
-
- /* Fill in what we need of the proc_desc. */
- proc_desc = (mips_extra_func_info_t)
- obstack_alloc (&sec->objfile->objfile_obstack,
- sizeof (struct mips_extra_func_info));
- PROC_LOW_ADDR (proc_desc) = pdr_pc;
-
- /* Only used for dummy frames. */
- PROC_HIGH_ADDR (proc_desc) = 0;
-
- PROC_FRAME_OFFSET (proc_desc)
- = bfd_get_32 (sec->objfile->obfd, ptr + 20);
- PROC_FRAME_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 24);
- PROC_FRAME_ADJUST (proc_desc) = 0;
- PROC_REG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 4);
- PROC_FREG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 12);
- PROC_REG_OFFSET (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 8);
- PROC_FREG_OFFSET (proc_desc)
- = bfd_get_32 (sec->objfile->obfd, ptr + 16);
- PROC_PC_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 28);
- proc_desc->pdr.isym = (long) sym;
-
- return proc_desc;
- }
- }
- }
-
- if (b == NULL)
- return NULL;
-
- if (startaddr > BLOCK_START (b))
- {
- /* This is the "pathological" case referred to in a comment in
- print_frame_info. It might be better to move this check into
- symbol reading. */
- return NULL;
- }
-
- sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_DOMAIN, 0, NULL);
-
- /* If we never found a PDR for this function in symbol reading, then
- examine prologues to find the information. */
- if (sym)
- {
- proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym);
- if (PROC_FRAME_REG (proc_desc) == -1)
- return NULL;
- else
- return proc_desc;
- }
- else
- return NULL;
-}
-
-/* MIPS stack frames are almost impenetrable. When execution stops,
- we basically have to look at symbol information for the function
- that we stopped in, which tells us *which* register (if any) is
- the base of the frame pointer, and what offset from that register
- the frame itself is at.
-
- This presents a problem when trying to examine a stack in memory
- (that isn't executing at the moment), using the "frame" command. We
- don't have a PC, nor do we have any registers except SP.
-
- This routine takes two arguments, SP and PC, and tries to make the
- cached frames look as if these two arguments defined a frame on the
- cache. This allows the rest of info frame to extract the important
- arguments without difficulty. */
-
-struct frame_info *
-setup_arbitrary_frame (int argc, CORE_ADDR *argv)
-{
- if (argc != 2)
- error ("MIPS frame specifications require two arguments: sp and pc");
-
- return create_new_frame (argv[0], argv[1]);
-}
-
/* According to the current ABI, should the type be passed in a
floating-point register (assuming that there is space)? When there
is no FPU, FP are not even considered as possibile candidates for
than necessary for EABI, because the first few arguments are
passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
- char valbuf[MAX_REGISTER_SIZE];
+ const gdb_byte *val;
+ gdb_byte valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
fprintf_unfiltered (gdb_stdlog, " push");
}
else
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
static enum return_value_convention
mips_eabi_return_value (struct gdbarch *gdbarch,
struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
if (TYPE_LENGTH (type) > 2 * mips_abi_regsize (gdbarch))
return RETURN_VALUE_STRUCT_CONVENTION;
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
+ const gdb_byte *val;
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
"mips_n32n64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
static enum return_value_convention
mips_n32n64_return_value (struct gdbarch *gdbarch,
struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
if (TYPE_CODE (type) == TYPE_CODE_STRUCT
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
+ const gdb_byte *val;
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
"mips_o32_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
static enum return_value_convention
mips_o32_return_value (struct gdbarch *gdbarch, struct type *type,
struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
return RETURN_VALUE_REGISTER_CONVENTION;
}
/* A struct that contains one or two floats. Each value is part
in the least significant part of their floating point
register.. */
- bfd_byte reg[MAX_REGISTER_SIZE];
+ gdb_byte reg[MAX_REGISTER_SIZE];
int regnum;
int field;
for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ len += align_up (TYPE_LENGTH (value_type (args[argnum])),
mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- char *val;
+ const gdb_byte *val;
struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
"mips_o64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
static enum return_value_convention
mips_o64_return_value (struct gdbarch *gdbarch,
struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
return RETURN_VALUE_STRUCT_CONVENTION;
}
static void
mips_read_fp_register_single (struct frame_info *frame, int regno,
- char *rare_buffer)
+ gdb_byte *rare_buffer)
{
int raw_size = register_size (current_gdbarch, regno);
- char *raw_buffer = alloca (raw_size);
+ gdb_byte *raw_buffer = alloca (raw_size);
if (!frame_register_read (frame, regno, raw_buffer))
- error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ error (_("can't read register %d (%s)"), regno, REGISTER_NAME (regno));
if (raw_size == 8)
{
/* We have a 64-bit value for this register. Find the low-order
static void
mips_read_fp_register_double (struct frame_info *frame, int regno,
- char *rare_buffer)
+ gdb_byte *rare_buffer)
{
int raw_size = register_size (current_gdbarch, regno);
/* We have a 64-bit value for this register, and we should use
all 64 bits. */
if (!frame_register_read (frame, regno, rare_buffer))
- error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ error (_("can't read register %d (%s)"), regno, REGISTER_NAME (regno));
}
else
{
if ((regno - mips_regnum (current_gdbarch)->fp0) & 1)
internal_error (__FILE__, __LINE__,
- "mips_read_fp_register_double: bad access to "
- "odd-numbered FP register");
+ _("mips_read_fp_register_double: bad access to "
+ "odd-numbered FP register"));
/* mips_read_fp_register_single will find the correct 32 bits from
each register. */
mips_print_fp_register (struct ui_file *file, struct frame_info *frame,
int regnum)
{ /* do values for FP (float) regs */
- char *raw_buffer;
+ gdb_byte *raw_buffer;
double doub, flt1; /* doubles extracted from raw hex data */
int inv1, inv2;
- raw_buffer =
- (char *) alloca (2 *
- register_size (current_gdbarch,
- mips_regnum (current_gdbarch)->fp0));
+ raw_buffer = alloca (2 * register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->fp0));
fprintf_filtered (file, "%s:", REGISTER_NAME (regnum));
fprintf_filtered (file, "%*s", 4 - (int) strlen (REGISTER_NAME (regnum)),
int regnum, int all)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
- char raw_buffer[MAX_REGISTER_SIZE];
+ gdb_byte raw_buffer[MAX_REGISTER_SIZE];
int offset;
if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
/* do values for GP (int) regs */
- char raw_buffer[MAX_REGISTER_SIZE];
+ gdb_byte raw_buffer[MAX_REGISTER_SIZE];
int ncols = (mips_abi_regsize (gdbarch) == 8 ? 4 : 8); /* display cols per row */
int col, byte;
int regnum;
break; /* end row: reached FP register */
/* OK: get the data in raw format. */
if (!frame_register_read (frame, regnum, raw_buffer))
- error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+ error (_("can't read register %d (%s)"), regnum, REGISTER_NAME (regnum));
/* pad small registers */
for (byte = 0;
byte < (mips_abi_regsize (current_gdbarch)
register_size (current_gdbarch,
regnum) - register_size (current_gdbarch, regnum);
byte < register_size (current_gdbarch, regnum); byte++)
- fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
+ fprintf_filtered (file, "%02x", raw_buffer[byte]);
else
for (byte = register_size (current_gdbarch, regnum) - 1;
byte >= 0; byte--)
- fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
+ fprintf_filtered (file, "%02x", raw_buffer[byte]);
fprintf_filtered (file, " ");
col++;
}
{
gdb_assert (regnum >= NUM_REGS);
if (*(REGISTER_NAME (regnum)) == '\0')
- error ("Not a valid register for the current processor type");
+ error (_("Not a valid register for the current processor type"));
mips_print_register (file, frame, regnum, 0);
fprintf_filtered (file, "\n");
}
int
-mips_step_skips_delay (CORE_ADDR pc)
+mips_single_step_through_delay (struct gdbarch *gdbarch,
+ struct frame_info *frame)
{
- char buf[MIPS32_INSN_SIZE];
+ CORE_ADDR pc = get_frame_pc (frame);
+ gdb_byte buf[MIPS_INSN32_SIZE];
/* There is no branch delay slot on MIPS16. */
- if (pc_is_mips16 (pc))
+ if (mips_pc_is_mips16 (pc))
+ return 0;
+
+ if (!breakpoint_here_p (pc + 4))
return 0;
- if (target_read_memory (pc, buf, sizeof buf) != 0)
- /* If error reading memory, guess that it is not a delayed branch. */
+ if (!safe_frame_unwind_memory (frame, pc, buf, sizeof buf))
+ /* If error reading memory, guess that it is not a delayed
+ branch. */
return 0;
return is_delayed (extract_unsigned_integer (buf, sizeof buf));
}
static CORE_ADDR
mips_skip_prologue (CORE_ADDR pc)
{
+ CORE_ADDR limit_pc;
+ CORE_ADDR func_addr;
+
/* See if we can determine the end of the prologue via the symbol table.
If so, then return either PC, or the PC after the prologue, whichever
is greater. */
-
- CORE_ADDR post_prologue_pc = after_prologue (pc);
- CORE_ADDR limit_pc;
-
- if (post_prologue_pc != 0)
- return max (pc, post_prologue_pc);
+ if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
+ {
+ CORE_ADDR post_prologue_pc = skip_prologue_using_sal (func_addr);
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
+ }
/* Can't determine prologue from the symbol table, need to examine
instructions. */
if (limit_pc == 0)
limit_pc = pc + 100; /* Magic. */
- if (pc_is_mips16 (pc))
+ if (mips_pc_is_mips16 (pc))
return mips16_scan_prologue (pc, limit_pc, NULL, NULL);
else
return mips32_scan_prologue (pc, limit_pc, NULL, NULL);
fpu = "absent (none)";
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
if (mips_fpu_type_auto)
printf_unfiltered
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
CORE_ADDR prid;
- prid = read_register (PRID_REGNUM);
+ prid = read_register (MIPS_PRID_REGNUM);
if ((prid & ~0xf) == 0x700)
tdep->mips_processor_reg_names = mips_r3041_reg_names;
gdb_print_insn_mips (bfd_vma memaddr, struct disassemble_info *info)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- mips_extra_func_info_t proc_desc;
-
- /* Search for the function containing this address. Set the low bit
- of the address when searching, in case we were given an even address
- that is the start of a 16-bit function. If we didn't do this,
- the search would fail because the symbol table says the function
- starts at an odd address, i.e. 1 byte past the given address. */
- memaddr = ADDR_BITS_REMOVE (memaddr);
- proc_desc = non_heuristic_proc_desc (make_mips16_addr (memaddr), NULL);
-
- /* Make an attempt to determine if this is a 16-bit function. If
- the procedure descriptor exists and the address therein is odd,
- it's definitely a 16-bit function. Otherwise, we have to just
- guess that if the address passed in is odd, it's 16-bits. */
+
/* FIXME: cagney/2003-06-26: Is this even necessary? The
disassembler needs to be able to locally determine the ISA, and
not rely on GDB. Otherwize the stand-alone 'objdump -d' will not
work. */
- if (proc_desc)
- {
- if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
- info->mach = bfd_mach_mips16;
- }
- else
- {
- if (pc_is_mips16 (memaddr))
- info->mach = bfd_mach_mips16;
- }
+ if (mips_pc_is_mips16 (memaddr))
+ info->mach = bfd_mach_mips16;
/* Round down the instruction address to the appropriate boundary. */
memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3);
(if necessary) to point to the actual memory location where the
breakpoint should be inserted. */
-static const unsigned char *
+static const gdb_byte *
mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
{
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- if (pc_is_mips16 (*pcptr))
+ if (mips_pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_big_breakpoint[] = { 0xe8, 0xa5 };
+ static gdb_byte mips16_big_breakpoint[] = { 0xe8, 0xa5 };
*pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_big_breakpoint);
return mips16_big_breakpoint;
/* The IDT board uses an unusual breakpoint value, and
sometimes gets confused when it sees the usual MIPS
breakpoint instruction. */
- static unsigned char big_breakpoint[] = { 0, 0x5, 0, 0xd };
- static unsigned char pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
- static unsigned char idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
+ static gdb_byte big_breakpoint[] = { 0, 0x5, 0, 0xd };
+ static gdb_byte pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
+ static gdb_byte idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
*lenptr = sizeof (big_breakpoint);
}
else
{
- if (pc_is_mips16 (*pcptr))
+ if (mips_pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_little_breakpoint[] = { 0xa5, 0xe8 };
+ static gdb_byte mips16_little_breakpoint[] = { 0xa5, 0xe8 };
*pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_little_breakpoint);
return mips16_little_breakpoint;
}
else
{
- static unsigned char little_breakpoint[] = { 0xd, 0, 0x5, 0 };
- static unsigned char pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
- static unsigned char idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
+ static gdb_byte little_breakpoint[] = { 0xd, 0, 0x5, 0 };
+ static gdb_byte pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
+ static gdb_byte idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
*lenptr = sizeof (little_breakpoint);
address from those two instructions. */
CORE_ADDR target_pc = read_signed_register (2);
- t_inst inst;
+ ULONGEST inst;
int i;
/* See if the name of the target function is __fn_stub_*. */
/* Scan through this _fn_stub_ code for the lui/addiu pair.
The limit on the search is arbitrarily set to 20
instructions. FIXME. */
- for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS32_INSN_SIZE)
+ for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSN32_SIZE)
{
inst = mips_fetch_instruction (target_pc);
if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
return 0; /* not a stub */
}
-
-/* Return non-zero if the PC is inside a call thunk (aka stub or trampoline).
- This implements the IN_SOLIB_CALL_TRAMPOLINE macro. */
-
-static int
-mips_in_call_stub (CORE_ADDR pc, char *name)
-{
- CORE_ADDR start_addr;
-
- /* Find the starting address of the function containing the PC. If the
- caller didn't give us a name, look it up at the same time. */
- if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) ==
- 0)
- return 0;
-
- if (strncmp (name, "__mips16_call_stub_", 19) == 0)
- {
- /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub. */
- if (name[19] >= '0' && name[19] <= '9')
- return 1;
- /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub. */
- else if (name[19] == 's' || name[19] == 'd')
- return pc == start_addr;
- }
-
- return 0; /* not a stub */
-}
-
-
-/* Return non-zero if the PC is inside a return thunk (aka stub or
- trampoline). */
-
-static int
-mips_in_solib_return_trampoline (CORE_ADDR pc, char *name)
-{
- CORE_ADDR start_addr;
-
- /* Find the starting address of the function containing the PC. */
- if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0)
- return 0;
-
- /* If the PC is in __mips16_ret_{d,s}f, this is a return stub. */
- if (strcmp (name, "__mips16_ret_sf") == 0
- || strcmp (name, "__mips16_ret_df") == 0)
- return 1;
-
- /* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
- i.e. after the jal instruction, this is effectively a return stub. */
- if (strncmp (name, "__mips16_call_stub_", 19) == 0
- && (name[19] == 's' || name[19] == 'd') && pc != start_addr)
- return 1;
-
- return 0; /* not a stub */
-}
-
-
-/* Return non-zero if the PC is in a library helper function that
- should be ignored. This implements the
- DEPRECATED_IGNORE_HELPER_CALL macro. */
-
-int
-mips_ignore_helper (CORE_ADDR pc)
-{
- char *name;
-
- /* Find the starting address and name of the function containing the PC. */
- if (find_pc_partial_function (pc, &name, NULL, NULL) == 0)
- return 0;
-
- /* If the PC is in __mips16_ret_{d,s}f, this is a library helper function
- that we want to ignore. */
- return (strcmp (name, "__mips16_ret_sf") == 0
- || strcmp (name, "__mips16_ret_df") == 0);
-}
-
-
/* Convert a dbx stab register number (from `r' declaration) to a GDB
[1 * NUM_REGS .. 2 * NUM_REGS) REGNUM. */
guarenteed to be correctly sign extended. */
static CORE_ADDR
-mips_integer_to_address (struct type *type, void *buf)
+mips_integer_to_address (struct gdbarch *gdbarch,
+ struct type *type, const gdb_byte *buf)
{
- char *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr));
+ gdb_byte *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr));
LONGEST val = unpack_long (type, buf);
store_signed_integer (tmp, TYPE_LENGTH (builtin_type_void_data_ptr), val);
return extract_signed_integer (tmp,
else if (strcmp (name, ".mdebug.eabi64") == 0)
*abip = MIPS_ABI_EABI64;
else
- warning ("unsupported ABI %s.", name + 8);
+ warning (_("unsupported ABI %s."), name + 8);
}
static enum mips_abi
if (mips_abi_strings[i] == mips_abi_string)
return (enum mips_abi) i;
- internal_error (__FILE__, __LINE__, "unknown ABI string");
+ internal_error (__FILE__, __LINE__, _("unknown ABI string"));
}
static struct gdbarch *
&floatformat_n32n64_long_double_big);
break;
default:
- internal_error (__FILE__, __LINE__, "unknown ABI in switch");
+ internal_error (__FILE__, __LINE__, _("unknown ABI in switch"));
}
/* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE
set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_trampoline_code);
- /* NOTE drow/2004-02-11: We overload the core solib trampoline code
- to support MIPS16. This is a bad thing. Make sure not to do it
- if we have an OS ABI that actually supports shared libraries, since
- shared library support is more important. If we have an OS someday
- that supports both shared libraries and MIPS16, we'll have to find
- a better place for these. */
- if (info.osabi == GDB_OSABI_UNKNOWN)
- {
- set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub);
- set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_solib_return_trampoline);
- }
+ set_gdbarch_single_step_through_delay (gdbarch, mips_single_step_through_delay);
/* Hook in OS ABI-specific overrides, if they have been registered. */
gdbarch_init_osabi (info, gdbarch);
/* Unwind the frame. */
frame_unwind_append_sniffer (gdbarch, mips_stub_frame_sniffer);
- frame_unwind_append_sniffer (gdbarch, mips_mdebug_frame_sniffer);
frame_unwind_append_sniffer (gdbarch, mips_insn16_frame_sniffer);
frame_unwind_append_sniffer (gdbarch, mips_insn32_frame_sniffer);
frame_base_append_sniffer (gdbarch, mips_stub_frame_base_sniffer);
- frame_base_append_sniffer (gdbarch, mips_mdebug_frame_base_sniffer);
frame_base_append_sniffer (gdbarch, mips_insn16_frame_base_sniffer);
frame_base_append_sniffer (gdbarch, mips_insn32_frame_base_sniffer);
/* Print out which MIPS ABI is in use. */
static void
-show_mips_abi (char *ignore_args, int from_tty)
+show_mips_abi (struct ui_file *file,
+ int from_tty,
+ struct cmd_list_element *ignored_cmd,
+ const char *ignored_value)
{
if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_mips)
- printf_filtered
- ("The MIPS ABI is unknown because the current architecture is not MIPS.\n");
+ fprintf_filtered
+ (file,
+ "The MIPS ABI is unknown because the current architecture "
+ "is not MIPS.\n");
else
{
enum mips_abi global_abi = global_mips_abi ();
const char *actual_abi_str = mips_abi_strings[actual_abi];
if (global_abi == MIPS_ABI_UNKNOWN)
- printf_filtered
- ("The MIPS ABI is set automatically (currently \"%s\").\n",
+ fprintf_filtered
+ (file,
+ "The MIPS ABI is set automatically (currently \"%s\").\n",
actual_abi_str);
else if (global_abi == actual_abi)
- printf_filtered
- ("The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
+ fprintf_filtered
+ (file,
+ "The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
actual_abi_str);
else
{
/* Probably shouldn't happen... */
- printf_filtered
- ("The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
+ fprintf_filtered
+ (file,
+ "The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
actual_abi_str, mips_abi_strings[global_abi]);
}
}
fprintf_unfiltered (file,
"mips_dump_tdep: mips_stack_argsize() = %d\n",
mips_stack_argsize (current_gdbarch));
- fprintf_unfiltered (file,
- "mips_dump_tdep: ADDR_BITS_REMOVE # %s\n",
- XSTRING (ADDR_BITS_REMOVE (ADDR)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: ATTACH_DETACH # %s\n",
- XSTRING (ATTACH_DETACH));
- fprintf_unfiltered (file,
- "mips_dump_tdep: DWARF_REG_TO_REGNUM # %s\n",
- XSTRING (DWARF_REG_TO_REGNUM (REGNUM)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: ECOFF_REG_TO_REGNUM # %s\n",
- XSTRING (ECOFF_REG_TO_REGNUM (REGNUM)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n",
- FIRST_EMBED_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: DEPRECATED_IGNORE_HELPER_CALL # %s\n",
- XSTRING (DEPRECATED_IGNORE_HELPER_CALL (PC)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n",
- XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: LAST_EMBED_REGNUM = %d\n",
- LAST_EMBED_REGNUM);
-#ifdef MACHINE_CPROC_FP_OFFSET
- fprintf_unfiltered (file,
- "mips_dump_tdep: MACHINE_CPROC_FP_OFFSET = %d\n",
- MACHINE_CPROC_FP_OFFSET);
-#endif
-#ifdef MACHINE_CPROC_PC_OFFSET
- fprintf_unfiltered (file,
- "mips_dump_tdep: MACHINE_CPROC_PC_OFFSET = %d\n",
- MACHINE_CPROC_PC_OFFSET);
-#endif
-#ifdef MACHINE_CPROC_SP_OFFSET
- fprintf_unfiltered (file,
- "mips_dump_tdep: MACHINE_CPROC_SP_OFFSET = %d\n",
- MACHINE_CPROC_SP_OFFSET);
-#endif
- fprintf_unfiltered (file, "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_EFI_SYMBOL_NAME = multi-arch!!\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_LAST_ARG_REGNUM = %d (%d regs)\n",
- MIPS_LAST_ARG_REGNUM,
- MIPS_LAST_ARG_REGNUM - MIPS_A0_REGNUM + 1);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_NUMREGS = %d\n", MIPS_NUMREGS);
- fprintf_unfiltered (file,
- "mips_dump_tdep: mips_abi_regsize() = %d\n",
- mips_abi_regsize (current_gdbarch));
- fprintf_unfiltered (file,
- "mips_dump_tdep: PRID_REGNUM = %d\n", PRID_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FRAME_ADJUST = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FRAME_OFFSET = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_FRAME_REG = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_MASK = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_PC_REG = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_MASK = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PROC_SYMBOL = function?\n");
- fprintf_unfiltered (file, "mips_dump_tdep: PS_REGNUM = %d\n", PS_REGNUM);
-#ifdef SAVED_BYTES
- fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_BYTES = %d\n", SAVED_BYTES);
-#endif
-#ifdef SAVED_FP
- fprintf_unfiltered (file, "mips_dump_tdep: SAVED_FP = %d\n", SAVED_FP);
-#endif
-#ifdef SAVED_PC
- fprintf_unfiltered (file, "mips_dump_tdep: SAVED_PC = %d\n", SAVED_PC);
-#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: SETUP_ARBITRARY_FRAME # %s\n",
- XSTRING (SETUP_ARBITRARY_FRAME (NUMARGS, ARGS)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: SOFTWARE_SINGLE_STEP # %s\n",
- XSTRING (SOFTWARE_SINGLE_STEP (SIG, BP_P)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P () = %d\n",
- SOFTWARE_SINGLE_STEP_P ());
- fprintf_unfiltered (file,
- "mips_dump_tdep: STAB_REG_TO_REGNUM # %s\n",
- XSTRING (STAB_REG_TO_REGNUM (REGNUM)));
-#ifdef STACK_END_ADDR
- fprintf_unfiltered (file,
- "mips_dump_tdep: STACK_END_ADDR = %d\n",
- STACK_END_ADDR);
-#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: STEP_SKIPS_DELAY # %s\n",
- XSTRING (STEP_SKIPS_DELAY (PC)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: STEP_SKIPS_DELAY_P = %d\n",
- STEP_SKIPS_DELAY_P);
- fprintf_unfiltered (file,
- "mips_dump_tdep: STOPPED_BY_WATCHPOINT # %s\n",
- XSTRING (STOPPED_BY_WATCHPOINT (WS)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: TABULAR_REGISTER_OUTPUT = used?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: TARGET_CAN_USE_HARDWARE_WATCHPOINT # %s\n",
- XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT
- (TYPE, CNT, OTHERTYPE)));
-#ifdef TRACE_CLEAR
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_CLEAR # %s\n",
- XSTRING (TRACE_CLEAR (THREAD, STATE)));
-#endif
-#ifdef TRACE_FLAVOR
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_FLAVOR = %d\n", TRACE_FLAVOR);
-#endif
-#ifdef TRACE_FLAVOR_SIZE
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_FLAVOR_SIZE = %d\n",
- TRACE_FLAVOR_SIZE);
-#endif
-#ifdef TRACE_SET
- fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_SET # %s\n",
- XSTRING (TRACE_SET (X, STATE)));
-#endif
-#ifdef UNUSED_REGNUM
- fprintf_unfiltered (file,
- "mips_dump_tdep: UNUSED_REGNUM = %d\n", UNUSED_REGNUM);
-#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: VM_MIN_ADDRESS = %ld\n",
- (long) VM_MIN_ADDRESS);
}
extern initialize_file_ftype _initialize_mips_tdep; /* -Wmissing-prototypes */
mips_abi_string = mips_abi_strings[MIPS_ABI_UNKNOWN];
if (MIPS_ABI_LAST + 1
!= sizeof (mips_abi_strings) / sizeof (mips_abi_strings[0]))
- internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync");
+ internal_error (__FILE__, __LINE__, _("mips_abi_strings out of sync"));
gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
/* Add root prefix command for all "set mips"/"show mips" commands */
add_prefix_cmd ("mips", no_class, set_mips_command,
- "Various MIPS specific commands.",
+ _("Various MIPS specific commands."),
&setmipscmdlist, "set mips ", 0, &setlist);
add_prefix_cmd ("mips", no_class, show_mips_command,
- "Various MIPS specific commands.",
+ _("Various MIPS specific commands."),
&showmipscmdlist, "show mips ", 0, &showlist);
/* Allow the user to override the saved register size. */
add_setshow_enum_cmd ("saved-gpreg-size", class_obscure,
- size_enums, &mips_abi_regsize_string, "\
-Set size of general purpose registers saved on the stack.\n", "\
-Show size of general purpose registers saved on the stack.\n", "\
+ size_enums, &mips_abi_regsize_string, _("\
+Set size of general purpose registers saved on the stack."), _("\
+Show size of general purpose registers saved on the stack."), _("\
This option can be set to one of:\n\
32 - Force GDB to treat saved GP registers as 32-bit\n\
64 - Force GDB to treat saved GP registers as 64-bit\n\
auto - Allow GDB to use the target's default setting or autodetect the\n\
- saved GP register size from information contained in the executable.\n\
- (default: auto)", "\
-Size of general purpose registers saved on the stack is %s.\n",
- NULL, NULL, &setmipscmdlist, &showmipscmdlist);
+ saved GP register size from information contained in the\n\
+ executable (default)."),
+ NULL,
+ NULL, /* FIXME: i18n: Size of general purpose registers saved on the stack is %s. */
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to override the argument stack size. */
add_setshow_enum_cmd ("stack-arg-size", class_obscure,
- size_enums, &mips_stack_argsize_string, "\
-Set the amount of stack space reserved for each argument.\n", "\
-Show the amount of stack space reserved for each argument.\n", "\
+ size_enums, &mips_stack_argsize_string, _("\
+Set the amount of stack space reserved for each argument."), _("\
+Show the amount of stack space reserved for each argument."), _("\
This option can be set to one of:\n\
32 - Force GDB to allocate 32-bit chunks per argument\n\
64 - Force GDB to allocate 64-bit chunks per argument\n\
auto - Allow GDB to determine the correct setting from the current\n\
- target and executable (default)", "\
-The amount of stack space reserved for each argument is %s.\n",
- NULL, NULL, &setmipscmdlist, &showmipscmdlist);
+ target and executable (default)"),
+ NULL,
+ NULL, /* FIXME: i18n: The amount of stack space reserved for each argument is %s. */
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to override the ABI. */
- c = add_set_enum_cmd
- ("abi", class_obscure, mips_abi_strings, &mips_abi_string,
- "Set the ABI used by this program.\n"
- "This option can be set to one of:\n"
- " auto - the default ABI associated with the current binary\n"
- " o32\n"
- " o64\n" " n32\n" " n64\n" " eabi32\n" " eabi64", &setmipscmdlist);
- set_cmd_sfunc (c, mips_abi_update);
- add_cmd ("abi", class_obscure, show_mips_abi,
- "Show ABI in use by MIPS target", &showmipscmdlist);
+ add_setshow_enum_cmd ("abi", class_obscure, mips_abi_strings,
+ &mips_abi_string, _("\
+Set the MIPS ABI used by this program."), _("\
+Show the MIPS ABI used by this program."), _("\
+This option can be set to one of:\n\
+ auto - the default ABI associated with the current binary\n\
+ o32\n\
+ o64\n\
+ n32\n\
+ n64\n\
+ eabi32\n\
+ eabi64"),
+ mips_abi_update,
+ show_mips_abi,
+ &setmipscmdlist, &showmipscmdlist);
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command,
- "Set use of MIPS floating-point coprocessor.",
+ _("Set use of MIPS floating-point coprocessor."),
&mipsfpulist, "set mipsfpu ", 0, &setlist);
add_cmd ("single", class_support, set_mipsfpu_single_command,
- "Select single-precision MIPS floating-point coprocessor.",
+ _("Select single-precision MIPS floating-point coprocessor."),
&mipsfpulist);
add_cmd ("double", class_support, set_mipsfpu_double_command,
- "Select double-precision MIPS floating-point coprocessor.",
+ _("Select double-precision MIPS floating-point coprocessor."),
&mipsfpulist);
add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
add_cmd ("none", class_support, set_mipsfpu_none_command,
- "Select no MIPS floating-point coprocessor.", &mipsfpulist);
+ _("Select no MIPS floating-point coprocessor."), &mipsfpulist);
add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
add_cmd ("auto", class_support, set_mipsfpu_auto_command,
- "Select MIPS floating-point coprocessor automatically.",
+ _("Select MIPS floating-point coprocessor automatically."),
&mipsfpulist);
add_cmd ("mipsfpu", class_support, show_mipsfpu_command,
- "Show current use of MIPS floating-point coprocessor target.",
+ _("Show current use of MIPS floating-point coprocessor target."),
&showlist);
/* We really would like to have both "0" and "unlimited" work, but
command.c doesn't deal with that. So make it a var_zinteger
because the user can always use "999999" or some such for unlimited. */
add_setshow_zinteger_cmd ("heuristic-fence-post", class_support,
- &heuristic_fence_post, "\
-Set the distance searched for the start of a function.\n", "\
-Show the distance searched for the start of a function.\n", "\
+ &heuristic_fence_post, _("\
+Set the distance searched for the start of a function."), _("\
+Show the distance searched for the start of a function."), _("\
If you are debugging a stripped executable, GDB needs to search through the\n\
program for the start of a function. This command sets the distance of the\n\
-search. The only need to set it is when debugging a stripped executable.", "\
-The distance searched for the start of a function is %s.\n",
- reinit_frame_cache_sfunc, NULL,
+search. The only need to set it is when debugging a stripped executable."),
+ reinit_frame_cache_sfunc,
+ NULL, /* FIXME: i18n: The distance searched for the start of a function is %s. */
&setlist, &showlist);
/* Allow the user to control whether the upper bits of 64-bit
addresses should be zeroed. */
- add_setshow_auto_boolean_cmd ("mask-address", no_class, &mask_address_var, "\
-Set zeroing of upper 32 bits of 64-bit addresses.", "\
-Show zeroing of upper 32 bits of 64-bit addresses.", "\
+ add_setshow_auto_boolean_cmd ("mask-address", no_class,
+ &mask_address_var, _("\
+Set zeroing of upper 32 bits of 64-bit addresses."), _("\
+Show zeroing of upper 32 bits of 64-bit addresses."), _("\
Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\
-allow GDB to determine the correct value.\n", "\
-Zerroing of upper 32 bits of 64-bit address is %s.",
- NULL, show_mask_address, &setmipscmdlist, &showmipscmdlist);
+allow GDB to determine the correct value."),
+ NULL, show_mask_address,
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to control the size of 32 bit registers within the
raw remote packet. */
add_setshow_boolean_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
- &mips64_transfers_32bit_regs_p, "\
-Set compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
-Show compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
+ &mips64_transfers_32bit_regs_p, _("\
+Set compatibility with 64-bit MIPS target that transfers 32-bit quantities."),
+ _("\
+Show compatibility with 64-bit MIPS target that transfers 32-bit quantities."),
+ _("\
Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
-64 bits for others. Use \"off\" to disable compatibility mode", "\
-Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s.",
- set_mips64_transfers_32bit_regs, NULL, &setlist, &showlist);
+64 bits for others. Use \"off\" to disable compatibility mode"),
+ set_mips64_transfers_32bit_regs,
+ NULL, /* FIXME: i18n: Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s. */
+ &setlist, &showlist);
/* Debug this files internals. */
add_setshow_zinteger_cmd ("mips", class_maintenance,
- &mips_debug, "\
-Set mips debugging.\n", "\
-Show mips debugging.\n", "\
-When non-zero, mips specific debugging is enabled.\n", "\
-Mips debugging is currently %s.\n",
- NULL, NULL,
+ &mips_debug, _("\
+Set mips debugging."), _("\
+Show mips debugging."), _("\
+When non-zero, mips specific debugging is enabled."),
+ NULL,
+ NULL, /* FIXME: i18n: Mips debugging is currently %s. */
&setdebuglist, &showdebuglist);
}