/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
int register_size;
};
-static int
-n32n64_floatformat_always_valid (const struct floatformat *fmt,
- const void *from)
-{
- return 1;
-}
-
-/* FIXME: brobecker/2004-08-08: Long Double values are 128 bit long.
- They are implemented as a pair of 64bit doubles where the high
- part holds the result of the operation rounded to double, and
- the low double holds the difference between the exact result and
- the rounded result. So "high" + "low" contains the result with
- added precision. Unfortunately, the floatformat structure used
- by GDB is not powerful enough to describe this format. As a temporary
- measure, we define a 128bit floatformat that only uses the high part.
- We lose a bit of precision but that's probably the best we can do
- for now with the current infrastructure. */
-
-static const struct floatformat floatformat_n32n64_long_double_big =
-{
- floatformat_big, 128, 0, 1, 11, 1023, 2047, 12, 52,
- floatformat_intbit_no,
- "floatformat_n32n64_long_double_big",
- n32n64_floatformat_always_valid
-};
-
-static const struct floatformat *floatformats_n32n64_long[BFD_ENDIAN_UNKNOWN] =
-{
- &floatformat_n32n64_long_double_big,
- &floatformat_n32n64_long_double_big
-};
-
const struct mips_regnum *
mips_regnum (struct gdbarch *gdbarch)
{
/* Return the name of the register corresponding to REGNO. */
static const char *
-mips_register_name (int regno)
+mips_register_name (struct gdbarch *gdbarch, int regno)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* GPR names for all ABIs other than n32/n64. */
static char *mips_gpr_names[] = {
"zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
"t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
};
- enum mips_abi abi = mips_abi (current_gdbarch);
+ enum mips_abi abi = mips_abi (gdbarch);
/* Map [gdbarch_num_regs .. 2*gdbarch_num_regs) onto the raw registers,
but then don't make the raw register names visible. */
- int rawnum = regno % gdbarch_num_regs (current_gdbarch);
- if (regno < gdbarch_num_regs (current_gdbarch))
+ int rawnum = regno % gdbarch_num_regs (gdbarch);
+ if (regno < gdbarch_num_regs (gdbarch))
return "";
/* The MIPS integer registers are always mapped from 0 to 31. The
else
return mips_gpr_names[rawnum];
}
- else if (tdesc_has_registers (gdbarch_target_desc (current_gdbarch)))
- return tdesc_register_name (rawnum);
- else if (32 <= rawnum && rawnum < gdbarch_num_regs (current_gdbarch))
+ else if (tdesc_has_registers (gdbarch_target_desc (gdbarch)))
+ return tdesc_register_name (gdbarch, rawnum);
+ else if (32 <= rawnum && rawnum < gdbarch_num_regs (gdbarch))
{
gdb_assert (rawnum - 32 < NUM_MIPS_PROCESSOR_REGS);
return tdep->mips_processor_reg_names[rawnum - 32];
/* Convert to/from a register and the corresponding memory value. */
static int
-mips_convert_register_p (int regnum, struct type *type)
-{
- return (gdbarch_byte_order (current_gdbarch) == BFD_ENDIAN_BIG
- && register_size (current_gdbarch, regnum) == 4
- && (regnum % gdbarch_num_regs (current_gdbarch))
- >= mips_regnum (current_gdbarch)->fp0
- && (regnum % gdbarch_num_regs (current_gdbarch))
- < mips_regnum (current_gdbarch)->fp0 + 32
+mips_convert_register_p (struct gdbarch *gdbarch, int regnum, struct type *type)
+{
+ return (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG
+ && register_size (gdbarch, regnum) == 4
+ && (regnum % gdbarch_num_regs (gdbarch))
+ >= mips_regnum (gdbarch)->fp0
+ && (regnum % gdbarch_num_regs (gdbarch))
+ < mips_regnum (gdbarch)->fp0 + 32
&& TYPE_CODE (type) == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8);
}
/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same format
- for the bits which make up the immediatate extension. */
+ for the bits which make up the immediate extension. */
static CORE_ADDR
extended_offset (unsigned int extension)
unsigned short prev_inst = 0; /* saved copy of previous instruction */
unsigned inst = 0; /* current instruction */
unsigned entry_inst = 0; /* the entry instruction */
+ unsigned save_inst = 0; /* the save instruction */
int reg, offset;
int extend_bytes = 0;
else if ((inst & 0xf81f) == 0xe809
&& (inst & 0x700) != 0x700) /* entry */
entry_inst = inst; /* save for later processing */
+ else if ((inst & 0xff80) == 0x6480) /* save */
+ {
+ save_inst = inst; /* save for later processing */
+ if (prev_extend_bytes) /* extend */
+ save_inst |= prev_inst << 16;
+ }
else if ((inst & 0xf800) == 0x1800) /* jal(x) */
cur_pc += MIPS_INSN16_SIZE; /* 32-bit instruction */
else if ((inst & 0xff1c) == 0x6704) /* move reg,$a0-$a3 */
}
}
+ /* The SAVE instruction is similar to ENTRY, except that defined by the
+ MIPS16e ASE of the MIPS Architecture. Unlike with ENTRY though, the
+ size of the frame is specified as an immediate field of instruction
+ and an extended variation exists which lets additional registers and
+ frame space to be specified. The instruction always treats registers
+ as 32-bit so its usefulness for 64-bit ABIs is questionable. */
+ if (save_inst != 0 && mips_abi_regsize (gdbarch) == 4)
+ {
+ static int args_table[16] = {
+ 0, 0, 0, 0, 1, 1, 1, 1,
+ 2, 2, 2, 0, 3, 3, 4, -1,
+ };
+ static int astatic_table[16] = {
+ 0, 1, 2, 3, 0, 1, 2, 3,
+ 0, 1, 2, 4, 0, 1, 0, -1,
+ };
+ int aregs = (save_inst >> 16) & 0xf;
+ int xsregs = (save_inst >> 24) & 0x7;
+ int args = args_table[aregs];
+ int astatic = astatic_table[aregs];
+ long frame_size;
+
+ if (args < 0)
+ {
+ warning (_("Invalid number of argument registers encoded in SAVE."));
+ args = 0;
+ }
+ if (astatic < 0)
+ {
+ warning (_("Invalid number of static registers encoded in SAVE."));
+ astatic = 0;
+ }
+
+ /* For standard SAVE the frame size of 0 means 128. */
+ frame_size = ((save_inst >> 16) & 0xf0) | (save_inst & 0xf);
+ if (frame_size == 0 && (save_inst >> 16) == 0)
+ frame_size = 16;
+ frame_size *= 8;
+ frame_offset += frame_size;
+
+ /* Now we can calculate what the SP must have been at the
+ start of the function prologue. */
+ sp += frame_offset;
+
+ /* Check if A0-A3 were saved in the caller's argument save area. */
+ for (reg = MIPS_A0_REGNUM, offset = 0; reg < args + 4; reg++)
+ {
+ set_reg_offset (this_cache, reg, sp + offset);
+ offset += mips_abi_regsize (gdbarch);
+ }
+
+ offset = -4;
+
+ /* Check if the RA register was pushed on the stack. */
+ if (save_inst & 0x40)
+ {
+ set_reg_offset (this_cache, MIPS_RA_REGNUM, sp + offset);
+ offset -= mips_abi_regsize (gdbarch);
+ }
+
+ /* Check if the S8 register was pushed on the stack. */
+ if (xsregs > 6)
+ {
+ set_reg_offset (this_cache, 30, sp + offset);
+ offset -= mips_abi_regsize (gdbarch);
+ xsregs--;
+ }
+ /* Check if S2-S7 were pushed on the stack. */
+ for (reg = 18 + xsregs - 1; reg > 18 - 1; reg--)
+ {
+ set_reg_offset (this_cache, reg, sp + offset);
+ offset -= mips_abi_regsize (gdbarch);
+ }
+
+ /* Check if the S1 register was pushed on the stack. */
+ if (save_inst & 0x10)
+ {
+ set_reg_offset (this_cache, 17, sp + offset);
+ offset -= mips_abi_regsize (gdbarch);
+ }
+ /* Check if the S0 register was pushed on the stack. */
+ if (save_inst & 0x20)
+ {
+ set_reg_offset (this_cache, 16, sp + offset);
+ offset -= mips_abi_regsize (gdbarch);
+ }
+
+ /* Check if A0-A3 were pushed on the stack. */
+ for (reg = MIPS_A0_REGNUM + 3; reg > MIPS_A0_REGNUM + 3 - astatic; reg--)
+ {
+ set_reg_offset (this_cache, reg, sp + offset);
+ offset -= mips_abi_regsize (gdbarch);
+ }
+ }
+
if (this_cache != NULL)
{
this_cache->base =
purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM)
{
- LONGEST regval =
- extract_unsigned_integer (val, partial_len);
+ LONGEST regval;
+
+ /* Sign extend pointers, 32-bit integers and signed
+ 16-bit and 8-bit integers; everything else is taken
+ as is. */
+
+ if ((partial_len == 4
+ && (typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_INT))
+ || (partial_len < 4
+ && typecode == TYPE_CODE_INT
+ && !TYPE_UNSIGNED (arg_type)))
+ regval = extract_signed_integer (val, partial_len);
+ else
+ regval = extract_unsigned_integer (val, partial_len);
/* A non-floating-point argument being passed in a
general register. If a struct or union, and if
delay slot of a non-prologue instruction). */
static CORE_ADDR
-mips_skip_prologue (CORE_ADDR pc)
+mips_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
CORE_ADDR limit_pc;
CORE_ADDR func_addr;
show_mipsfpu_command (char *args, int from_tty)
{
char *fpu;
+
+ if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_mips)
+ {
+ printf_unfiltered
+ ("The MIPS floating-point coprocessor is unknown "
+ "because the current architecture is not MIPS.\n");
+ return;
+ }
+
switch (MIPS_FPU_TYPE)
{
case MIPS_FPU_SINGLE:
should be inserted. */
static const gdb_byte *
-mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
+mips_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr)
{
- if (gdbarch_byte_order (current_gdbarch) == BFD_ENDIAN_BIG)
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
{
if (mips_pc_is_mips16 (*pcptr))
{
[1 * gdbarch_num_regs .. 2 * gdbarch_num_regs) REGNUM. */
static int
-mips_stab_reg_to_regnum (int num)
+mips_stab_reg_to_regnum (struct gdbarch *gdbarch, int num)
{
int regnum;
if (num >= 0 && num < 32)
regnum = num;
else if (num >= 38 && num < 70)
- regnum = num + mips_regnum (current_gdbarch)->fp0 - 38;
+ regnum = num + mips_regnum (gdbarch)->fp0 - 38;
else if (num == 70)
- regnum = mips_regnum (current_gdbarch)->hi;
+ regnum = mips_regnum (gdbarch)->hi;
else if (num == 71)
- regnum = mips_regnum (current_gdbarch)->lo;
+ regnum = mips_regnum (gdbarch)->lo;
else
/* This will hopefully (eventually) provoke a warning. Should
we be calling complaint() here? */
- return gdbarch_num_regs (current_gdbarch)
- + gdbarch_num_pseudo_regs (current_gdbarch);
- return gdbarch_num_regs (current_gdbarch) + regnum;
+ return gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch);
+ return gdbarch_num_regs (gdbarch) + regnum;
}
gdbarch_num_regs .. 2 * gdbarch_num_regs) REGNUM. */
static int
-mips_dwarf_dwarf2_ecoff_reg_to_regnum (int num)
+mips_dwarf_dwarf2_ecoff_reg_to_regnum (struct gdbarch *gdbarch, int num)
{
int regnum;
if (num >= 0 && num < 32)
regnum = num;
else if (num >= 32 && num < 64)
- regnum = num + mips_regnum (current_gdbarch)->fp0 - 32;
+ regnum = num + mips_regnum (gdbarch)->fp0 - 32;
else if (num == 64)
- regnum = mips_regnum (current_gdbarch)->hi;
+ regnum = mips_regnum (gdbarch)->hi;
else if (num == 65)
- regnum = mips_regnum (current_gdbarch)->lo;
+ regnum = mips_regnum (gdbarch)->lo;
else
/* This will hopefully (eventually) provoke a warning. Should we
be calling complaint() here? */
- return gdbarch_num_regs (current_gdbarch)
- + gdbarch_num_pseudo_regs (current_gdbarch);
- return gdbarch_num_regs (current_gdbarch) + regnum;
+ return gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch);
+ return gdbarch_num_regs (gdbarch) + regnum;
}
static int
-mips_register_sim_regno (int regnum)
+mips_register_sim_regno (struct gdbarch *gdbarch, int regnum)
{
/* Only makes sense to supply raw registers. */
- gdb_assert (regnum >= 0 && regnum < gdbarch_num_regs (current_gdbarch));
+ gdb_assert (regnum >= 0 && regnum < gdbarch_num_regs (gdbarch));
/* FIXME: cagney/2002-05-13: Need to look at the pseudo register to
decide if it is valid. Should instead define a standard sim/gdb
register numbering scheme. */
- if (gdbarch_register_name (current_gdbarch,
- gdbarch_num_regs
- (current_gdbarch) + regnum) != NULL
- && gdbarch_register_name (current_gdbarch,
- gdbarch_num_regs
- (current_gdbarch) + regnum)[0] != '\0')
+ if (gdbarch_register_name (gdbarch,
+ gdbarch_num_regs (gdbarch) + regnum) != NULL
+ && gdbarch_register_name (gdbarch,
+ gdbarch_num_regs (gdbarch) + regnum)[0] != '\0')
return regnum;
else
return LEGACY_SIM_REGNO_IGNORE;
an assertion failure. */
static void
-mips_virtual_frame_pointer (CORE_ADDR pc, int *reg, LONGEST *offset)
+mips_virtual_frame_pointer (struct gdbarch *gdbarch,
+ CORE_ADDR pc, int *reg, LONGEST *offset)
{
*reg = MIPS_SP_REGNUM;
*offset = 0;
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
set_gdbarch_long_double_bit (gdbarch, 128);
- set_gdbarch_long_double_format (gdbarch, floatformats_n32n64_long);
+ set_gdbarch_long_double_format (gdbarch, floatformats_ibm_long_double);
break;
case MIPS_ABI_N64:
set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
set_gdbarch_long_double_bit (gdbarch, 128);
- set_gdbarch_long_double_format (gdbarch, floatformats_n32n64_long);
+ set_gdbarch_long_double_format (gdbarch, floatformats_ibm_long_double);
break;
default:
internal_error (__FILE__, __LINE__, _("unknown ABI in switch"));
projects / deliverable / binutils-gdb.git / blobdiff