unsigned long reg_mask = 0;
if (start_pc == 0) return NULL;
- bzero(&temp_proc_desc, sizeof(temp_proc_desc));
- bzero(&temp_saved_regs, sizeof(struct frame_saved_regs));
+ memset(&temp_proc_desc, '\0', sizeof(temp_proc_desc));
+ memset(&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
PROC_LOW_ADDR(&temp_proc_desc) = start_pc;
if (start_pc + 200 < limit_pc) limit_pc = start_pc + 200;
{
mips_extra_func_info_t proc_desc;
struct block *b = block_for_pc(pc);
- struct symbol *sym =
- b ? lookup_symbol(MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, 0, NULL) : NULL;
+ struct symbol *sym;
+ CORE_ADDR startaddr;
+
+ find_pc_partial_function (pc, NULL, &startaddr, NULL);
+ if (b == NULL)
+ sym = NULL;
+ else
+ {
+ if (startaddr > BLOCK_START (b))
+ /* This is the "pathological" case referred to in a comment in
+ print_frame_info. It might be better to move this check into
+ symbol reading. */
+ sym = NULL;
+ else
+ sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE,
+ 0, NULL);
+ }
if (sym)
{
&& PROC_HIGH_ADDR(&link->info) > pc)
return &link->info;
+ if (startaddr == 0)
+ startaddr = heuristic_proc_start (pc);
+
proc_desc =
- heuristic_proc_desc (heuristic_proc_start (pc), pc, next_frame);
+ heuristic_proc_desc (startaddr, pc, next_frame);
}
return proc_desc;
}
return 0;
cached_proc_desc = proc_desc;
- return read_next_frame_reg(frame, PROC_FRAME_REG(proc_desc))
- + PROC_FRAME_OFFSET(proc_desc);
+
+ /* If no frame pointer and frame size is zero, we must be at end
+ of stack (or otherwise hosed). If we don't check frame size,
+ we loop forever if we see a zero size frame. */
+ if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+ && PROC_FRAME_OFFSET (proc_desc) == 0
+ /* Frameless functions, which can happen on the innermost frame
+ or a frame which was innermost when a signal happened, can
+ have frame size zero. No need to check for non-frameless
+ functions in these situations, though (I don't think). */
+ && frame->next != NULL
+ && !frame->next->signal_handler_caller)
+ return 0;
+ else
+ return read_next_frame_reg(frame, PROC_FRAME_REG(proc_desc))
+ + PROC_FRAME_OFFSET(proc_desc);
}
void
/* If this is the innermost frame, and we are still in the
prologue (loosely defined), then the registers may not have
- been saved yet. But they haven't been clobbered either, so
- it's fine to say they have not been saved. */
+ been saved yet. */
if (fci->next == NULL
+ && !PROC_DESC_IS_DUMMY(proc_desc)
&& mips_in_lenient_prologue (PROC_LOW_ADDR (proc_desc), fci->pc))
- /* We already zeroed the saved regs. */
- ;
- else if (proc_desc == &temp_proc_desc)
+ {
+ /* Can't just say that the registers are not saved, because they
+ might get clobbered halfway through the prologue.
+ heuristic_proc_desc already has the right code to figure out
+ exactly what has been saved, so use it. As far as I know we
+ could be doing this (as we do on the 68k, for example)
+ regardless of whether we are in the prologue; I'm leaving in
+ the check for being in the prologue only out of conservatism
+ (I'm not sure whether heuristic_proc_desc handles all cases,
+ for example).
+
+ This stuff is ugly (and getting uglier by the minute). Probably
+ the best way to clean it up is to ignore the proc_desc's from
+ the symbols altogher, and get all the information we need by
+ examining the prologue (provided we can make the prologue
+ examining code good enough to get all the cases...). */
+ proc_desc =
+ heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
+ fci->pc,
+ fci->next);
+ }
+
+ if (proc_desc == &temp_proc_desc)
*fci->saved_regs = temp_saved_regs;
else
{
mips_print_register (regnum, all)
int regnum, all;
{
- unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE];
- REGISTER_TYPE val;
+ unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ REGISTER_TYPE val;
- /* Get the data in raw format. */
- if (read_relative_register_raw_bytes (regnum, raw_buffer))
- {
- printf_filtered ("%s: [Invalid]", reg_names[regnum]);
- return;
- }
-
- /* If an even floating pointer register, also print as double. */
- if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM+32
- && !((regnum-FP0_REGNUM) & 1)) {
- char dbuffer[MAX_REGISTER_RAW_SIZE];
-
- read_relative_register_raw_bytes (regnum, dbuffer);
- read_relative_register_raw_bytes (regnum+1, dbuffer+4);
+ /* Get the data in raw format. */
+ if (read_relative_register_raw_bytes (regnum, raw_buffer))
+ {
+ printf_filtered ("%s: [Invalid]", reg_names[regnum]);
+ return;
+ }
+
+ /* If an even floating pointer register, also print as double. */
+ if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM+32
+ && !((regnum-FP0_REGNUM) & 1)) {
+ char dbuffer[MAX_REGISTER_RAW_SIZE];
+
+ read_relative_register_raw_bytes (regnum, dbuffer);
+ read_relative_register_raw_bytes (regnum+1, dbuffer+4);
#ifdef REGISTER_CONVERT_TO_TYPE
- REGISTER_CONVERT_TO_TYPE(regnum, builtin_type_double, dbuffer);
-#endif
- printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
- val_print (builtin_type_double, dbuffer, 0,
- stdout, 0, 1, 0, Val_pretty_default);
- printf_filtered ("); ");
- }
- fputs_filtered (reg_names[regnum], stdout);
-#ifndef NUMERIC_REG_NAMES
- if (regnum < 32)
- printf_filtered ("(r%d): ", regnum);
- else
+ REGISTER_CONVERT_TO_TYPE(regnum, builtin_type_double, dbuffer);
#endif
- printf_filtered (": ");
+ printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
+ val_print (builtin_type_double, dbuffer, 0,
+ stdout, 0, 1, 0, Val_pretty_default);
+ printf_filtered ("); ");
+ }
+ fputs_filtered (reg_names[regnum], stdout);
+
+ /* The problem with printing numeric register names (r26, etc.) is that
+ the user can't use them on input. Probably the best solution is to
+ fix it so that either the numeric or the funky (a2, etc.) names
+ are accepted on input. */
+ if (regnum < 32)
+ printf_filtered ("(r%d): ", regnum);
+ else
+ printf_filtered (": ");
- /* If virtual format is floating, print it that way. */
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT
- && ! INVALID_FLOAT (raw_buffer, REGISTER_VIRTUAL_SIZE(regnum))) {
- val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0,
- stdout, 0, 1, 0, Val_pretty_default);
- }
- /* Else print as integer in hex. */
- else
- {
- long val;
+ /* If virtual format is floating, print it that way. */
+ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT
+ && ! INVALID_FLOAT (raw_buffer, REGISTER_VIRTUAL_SIZE(regnum))) {
+ val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0,
+ stdout, 0, 1, 0, Val_pretty_default);
+ }
+ /* Else print as integer in hex. */
+ else
+ {
+ long val;
- val = extract_signed_integer (raw_buffer,
- REGISTER_RAW_SIZE (regnum));
+ val = extract_signed_integer (raw_buffer,
+ REGISTER_RAW_SIZE (regnum));
- if (val == 0)
- printf_filtered ("0");
- else if (all)
- printf_filtered (local_hex_format(), val);
- else
- printf_filtered ("%s=%d", local_hex_string(val), val);
- }
+ if (val == 0)
+ printf_filtered ("0");
+ else if (all)
+ /* FIXME: We should be printing this in a fixed field width, so that
+ registers line up. */
+ printf_filtered (local_hex_format(), val);
+ else
+ printf_filtered ("%s=%d", local_hex_string(val), val);
+ }
}
/* Replacement for generic do_registers_info. */
return -1;
}
\f
-/* Does this instruction involve use of a delay slot? */
+/* Is this a branch with a delay slot? */
static int
is_delayed (insn)
unsigned long insn;
if (mips_opcodes[i].pinfo != INSN_MACRO
&& (insn & mips_opcodes[i].mask) == mips_opcodes[i].match)
break;
- return i < NUMOPCODES && (mips_opcodes[i].pinfo & ANY_DELAY);
+ return (i < NUMOPCODES
+ && (mips_opcodes[i].pinfo & (INSN_UNCOND_BRANCH_DELAY
+ | INSN_COND_BRANCH_DELAY
+ | INSN_COND_BRANCH_LIKELY)));
}
/* To skip prologues, I use this predicate. Returns either PC itself
write_register_bytes(REGISTER_BYTE (regnum), raw_buffer, TYPE_LENGTH (valtype));
}
-/* Let the user turn off floating point and set the fence post for
- heuristic_proc_start. */
+static void reinit_frame_cache_sfunc PARAMS ((char *, int,
+ struct cmd_list_element *));
+
+/* Just like reinit_frame_cache, but with the right arguments to be
+ callable as an sfunc. */
+static void
+reinit_frame_cache_sfunc (args, from_tty, c)
+ char *args;
+ int from_tty;
+ struct cmd_list_element *c;
+{
+ reinit_frame_cache ();
+}
void
_initialize_mips_tdep ()
{
+ struct cmd_list_element *c;
+
+ /* Let the user turn off floating point and set the fence post for
+ heuristic_proc_start. */
+
add_show_from_set
(add_set_cmd ("mipsfpu", class_support, var_boolean,
(char *) &mips_fpu,
or dealing with return values.", &setlist),
&showlist);
- add_show_from_set
- (add_set_cmd ("heuristic-fence-post", class_support, var_uinteger,
- (char *) &heuristic_fence_post,
- "\
+ /* We really would like to have both "0" and "unlimited" work, but
+ command.c doesn't deal with that. So make it a var_zinteger
+ because the user can always use "999999" or some such for unlimited. */
+ c = add_set_cmd ("heuristic-fence-post", class_support, var_zinteger,
+ (char *) &heuristic_fence_post,
+ "\
Set the distance searched for the start of a function.\n\
If you are debugging a stripped executable, GDB needs to search through the\n\
program for the start of a function. This command sets the distance of the\n\
search. The only need to set it is when debugging a stripped executable.",
- &setlist),
- &showlist);
+ &setlist);
+ /* We need to throw away the frame cache when we set this, since it
+ might change our ability to get backtraces. */
+ c->function.sfunc = reinit_frame_cache_sfunc;
+ add_show_from_set (c, &showlist);
}