/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software
Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
case MIPS_ABI_UNKNOWN:
case MIPS_ABI_LAST:
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
else if (mips_abi_regsize_string == size_64)
return 8;
reg_offset = 0;
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
if (mips_debug)
fprintf_unfiltered (gdb_stderr,
}
else
internal_error (__FILE__, __LINE__,
- "mips_register_name: bad register number %d", rawnum);
+ _("mips_register_name: bad register number %d"), rawnum);
}
/* Return the groups that a MIPS register can be categorised into. */
regcache_raw_read_part (regcache, rawnum, 4, 4, buf);
}
else
- internal_error (__FILE__, __LINE__, "bad register size");
+ internal_error (__FILE__, __LINE__, _("bad register size"));
}
static void
regcache_raw_write_part (regcache, rawnum, 4, 4, buf);
}
else
- internal_error (__FILE__, __LINE__, "bad register size");
+ internal_error (__FILE__, __LINE__, _("bad register size"));
}
/* Table to translate MIPS16 register field to actual register number. */
if (!gdbarch_update_p (info))
{
mips64_transfers_32bit_regs_p = 0;
- error ("32-bit compatibility mode not supported");
+ error (_("32-bit compatibility mode not supported"));
}
}
return builtin_type_ieee_double_little;
case BFD_ENDIAN_UNKNOWN:
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
}
else if (regnum < NUM_REGS)
case AUTO_BOOLEAN_AUTO:
return tdep->default_mask_address_p;
default:
- internal_error (__FILE__, __LINE__, "mips_mask_address_p: bad switch");
+ internal_error (__FILE__, __LINE__, _("mips_mask_address_p: bad switch"));
return -1;
}
}
static void
-show_mask_address (char *cmd, int from_tty, struct cmd_list_element *c)
+show_mask_address (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ deprecated_show_value_hack (file, from_tty, c, value);
switch (mask_address_var)
{
case AUTO_BOOLEAN_TRUE:
mips_mask_address_p (tdep) ? "enabled" : "disabled");
break;
default:
- internal_error (__FILE__, __LINE__, "show_mask_address: bad switch");
+ internal_error (__FILE__, __LINE__, _("show_mask_address: bad switch"));
break;
}
}
break;
}
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
upk->offset = offset;
upk->regx = regx;
{
static int blurb_printed = 0;
- warning ("GDB can't find the start of the function at 0x%s.",
+ warning (_("GDB can't find the start of the function at 0x%s."),
paddr_nz (pc));
if (!blurb_printed)
fprintf_unfiltered (gdb_stdlog, " push");
}
else
- val = (char *) VALUE_CONTENTS (arg);
+ val = (char *) value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
"mips_n32n64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = (char *) value_contents (arg);
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
"mips_o32_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = (char *) value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
return RETURN_VALUE_REGISTER_CONVENTION;
}
"mips_o64_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ val = (char *) value_contents (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
char *raw_buffer = alloca (raw_size);
if (!frame_register_read (frame, regno, raw_buffer))
- error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ error (_("can't read register %d (%s)"), regno, REGISTER_NAME (regno));
if (raw_size == 8)
{
/* We have a 64-bit value for this register. Find the low-order
/* We have a 64-bit value for this register, and we should use
all 64 bits. */
if (!frame_register_read (frame, regno, rare_buffer))
- error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ error (_("can't read register %d (%s)"), regno, REGISTER_NAME (regno));
}
else
{
if ((regno - mips_regnum (current_gdbarch)->fp0) & 1)
internal_error (__FILE__, __LINE__,
- "mips_read_fp_register_double: bad access to "
- "odd-numbered FP register");
+ _("mips_read_fp_register_double: bad access to "
+ "odd-numbered FP register"));
/* mips_read_fp_register_single will find the correct 32 bits from
each register. */
break; /* end row: reached FP register */
/* OK: get the data in raw format. */
if (!frame_register_read (frame, regnum, raw_buffer))
- error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+ error (_("can't read register %d (%s)"), regnum, REGISTER_NAME (regnum));
/* pad small registers */
for (byte = 0;
byte < (mips_abi_regsize (current_gdbarch)
{
gdb_assert (regnum >= NUM_REGS);
if (*(REGISTER_NAME (regnum)) == '\0')
- error ("Not a valid register for the current processor type");
+ error (_("Not a valid register for the current processor type"));
mips_print_register (file, frame, regnum, 0);
fprintf_filtered (file, "\n");
fpu = "absent (none)";
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
if (mips_fpu_type_auto)
printf_unfiltered
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
instead of relying on globals. Doing that would let generic code
handle the search for this specific architecture. */
if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "set mipsfpu failed");
+ internal_error (__FILE__, __LINE__, _("set mipsfpu failed"));
}
static void
guarenteed to be correctly sign extended. */
static CORE_ADDR
-mips_integer_to_address (struct type *type, void *buf)
+mips_integer_to_address (struct gdbarch *gdbarch,
+ struct type *type, const bfd_byte *buf)
{
char *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr));
LONGEST val = unpack_long (type, buf);
else if (strcmp (name, ".mdebug.eabi64") == 0)
*abip = MIPS_ABI_EABI64;
else
- warning ("unsupported ABI %s.", name + 8);
+ warning (_("unsupported ABI %s."), name + 8);
}
static enum mips_abi
if (mips_abi_strings[i] == mips_abi_string)
return (enum mips_abi) i;
- internal_error (__FILE__, __LINE__, "unknown ABI string");
+ internal_error (__FILE__, __LINE__, _("unknown ABI string"));
}
static struct gdbarch *
&floatformat_n32n64_long_double_big);
break;
default:
- internal_error (__FILE__, __LINE__, "unknown ABI in switch");
+ internal_error (__FILE__, __LINE__, _("unknown ABI in switch"));
}
/* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE
mips_abi_string = mips_abi_strings[MIPS_ABI_UNKNOWN];
if (MIPS_ABI_LAST + 1
!= sizeof (mips_abi_strings) / sizeof (mips_abi_strings[0]))
- internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync");
+ internal_error (__FILE__, __LINE__, _("mips_abi_strings out of sync"));
gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
/* Add root prefix command for all "set mips"/"show mips" commands */
add_prefix_cmd ("mips", no_class, set_mips_command,
- "Various MIPS specific commands.",
+ _("Various MIPS specific commands."),
&setmipscmdlist, "set mips ", 0, &setlist);
add_prefix_cmd ("mips", no_class, show_mips_command,
- "Various MIPS specific commands.",
+ _("Various MIPS specific commands."),
&showmipscmdlist, "show mips ", 0, &showlist);
/* Allow the user to override the saved register size. */
add_setshow_enum_cmd ("saved-gpreg-size", class_obscure,
- size_enums, &mips_abi_regsize_string, "\
-Set size of general purpose registers saved on the stack.\n", "\
-Show size of general purpose registers saved on the stack.\n", "\
+ size_enums, &mips_abi_regsize_string, _("\
+Set size of general purpose registers saved on the stack."), _("\
+Show size of general purpose registers saved on the stack."), _("\
This option can be set to one of:\n\
32 - Force GDB to treat saved GP registers as 32-bit\n\
64 - Force GDB to treat saved GP registers as 64-bit\n\
auto - Allow GDB to use the target's default setting or autodetect the\n\
- saved GP register size from information contained in the executable.\n\
- (default: auto)", "\
-Size of general purpose registers saved on the stack is %s.\n",
- NULL, NULL, &setmipscmdlist, &showmipscmdlist);
+ saved GP register size from information contained in the\n\
+ executable (default)."),
+ NULL,
+ NULL, /* FIXME: i18n: Size of general purpose registers saved on the stack is %s. */
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to override the argument stack size. */
add_setshow_enum_cmd ("stack-arg-size", class_obscure,
- size_enums, &mips_stack_argsize_string, "\
-Set the amount of stack space reserved for each argument.\n", "\
-Show the amount of stack space reserved for each argument.\n", "\
+ size_enums, &mips_stack_argsize_string, _("\
+Set the amount of stack space reserved for each argument."), _("\
+Show the amount of stack space reserved for each argument."), _("\
This option can be set to one of:\n\
32 - Force GDB to allocate 32-bit chunks per argument\n\
64 - Force GDB to allocate 64-bit chunks per argument\n\
auto - Allow GDB to determine the correct setting from the current\n\
- target and executable (default)", "\
-The amount of stack space reserved for each argument is %s.\n",
- NULL, NULL, &setmipscmdlist, &showmipscmdlist);
+ target and executable (default)"),
+ NULL,
+ NULL, /* FIXME: i18n: The amount of stack space reserved for each argument is %s. */
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to override the ABI. */
- c = add_set_enum_cmd
- ("abi", class_obscure, mips_abi_strings, &mips_abi_string,
- "Set the ABI used by this program.\n"
- "This option can be set to one of:\n"
- " auto - the default ABI associated with the current binary\n"
- " o32\n"
- " o64\n" " n32\n" " n64\n" " eabi32\n" " eabi64", &setmipscmdlist);
- set_cmd_sfunc (c, mips_abi_update);
- add_cmd ("abi", class_obscure, show_mips_abi,
- "Show ABI in use by MIPS target", &showmipscmdlist);
+ add_setshow_enum_cmd ("abi", class_obscure, mips_abi_strings,
+ &mips_abi_string, _("\
+Set the MIPS ABI used by this program."), _("\
+Show the MIPS ABI used by this program."), _("\
+This option can be set to one of:\n\
+ auto - the default ABI associated with the current binary\n\
+ o32\n\
+ o64\n\
+ n32\n\
+ n64\n\
+ eabi32\n\
+ eabi64"),
+ mips_abi_update,
+ show_mips_abi,
+ &setmipscmdlist, &showmipscmdlist);
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command,
- "Set use of MIPS floating-point coprocessor.",
+ _("Set use of MIPS floating-point coprocessor."),
&mipsfpulist, "set mipsfpu ", 0, &setlist);
add_cmd ("single", class_support, set_mipsfpu_single_command,
- "Select single-precision MIPS floating-point coprocessor.",
+ _("Select single-precision MIPS floating-point coprocessor."),
&mipsfpulist);
add_cmd ("double", class_support, set_mipsfpu_double_command,
- "Select double-precision MIPS floating-point coprocessor.",
+ _("Select double-precision MIPS floating-point coprocessor."),
&mipsfpulist);
add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
add_cmd ("none", class_support, set_mipsfpu_none_command,
- "Select no MIPS floating-point coprocessor.", &mipsfpulist);
+ _("Select no MIPS floating-point coprocessor."), &mipsfpulist);
add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
add_cmd ("auto", class_support, set_mipsfpu_auto_command,
- "Select MIPS floating-point coprocessor automatically.",
+ _("Select MIPS floating-point coprocessor automatically."),
&mipsfpulist);
add_cmd ("mipsfpu", class_support, show_mipsfpu_command,
- "Show current use of MIPS floating-point coprocessor target.",
+ _("Show current use of MIPS floating-point coprocessor target."),
&showlist);
/* We really would like to have both "0" and "unlimited" work, but
command.c doesn't deal with that. So make it a var_zinteger
because the user can always use "999999" or some such for unlimited. */
add_setshow_zinteger_cmd ("heuristic-fence-post", class_support,
- &heuristic_fence_post, "\
-Set the distance searched for the start of a function.\n", "\
-Show the distance searched for the start of a function.\n", "\
+ &heuristic_fence_post, _("\
+Set the distance searched for the start of a function."), _("\
+Show the distance searched for the start of a function."), _("\
If you are debugging a stripped executable, GDB needs to search through the\n\
program for the start of a function. This command sets the distance of the\n\
-search. The only need to set it is when debugging a stripped executable.", "\
-The distance searched for the start of a function is %s.\n",
- reinit_frame_cache_sfunc, NULL,
+search. The only need to set it is when debugging a stripped executable."),
+ reinit_frame_cache_sfunc,
+ NULL, /* FIXME: i18n: The distance searched for the start of a function is %s. */
&setlist, &showlist);
/* Allow the user to control whether the upper bits of 64-bit
addresses should be zeroed. */
- add_setshow_auto_boolean_cmd ("mask-address", no_class, &mask_address_var, "\
-Set zeroing of upper 32 bits of 64-bit addresses.", "\
-Show zeroing of upper 32 bits of 64-bit addresses.", "\
+ add_setshow_auto_boolean_cmd ("mask-address", no_class,
+ &mask_address_var, _("\
+Set zeroing of upper 32 bits of 64-bit addresses."), _("\
+Show zeroing of upper 32 bits of 64-bit addresses."), _("\
Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\
-allow GDB to determine the correct value.\n", "\
-Zerroing of upper 32 bits of 64-bit address is %s.",
- NULL, show_mask_address, &setmipscmdlist, &showmipscmdlist);
+allow GDB to determine the correct value."),
+ NULL, show_mask_address,
+ &setmipscmdlist, &showmipscmdlist);
/* Allow the user to control the size of 32 bit registers within the
raw remote packet. */
add_setshow_boolean_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
- &mips64_transfers_32bit_regs_p, "\
-Set compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
-Show compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
+ &mips64_transfers_32bit_regs_p, _("\
+Set compatibility with 64-bit MIPS target that transfers 32-bit quantities."),
+ _("\
+Show compatibility with 64-bit MIPS target that transfers 32-bit quantities."),
+ _("\
Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
-64 bits for others. Use \"off\" to disable compatibility mode", "\
-Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s.",
- set_mips64_transfers_32bit_regs, NULL, &setlist, &showlist);
+64 bits for others. Use \"off\" to disable compatibility mode"),
+ set_mips64_transfers_32bit_regs,
+ NULL, /* FIXME: i18n: Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s. */
+ &setlist, &showlist);
/* Debug this files internals. */
add_setshow_zinteger_cmd ("mips", class_maintenance,
- &mips_debug, "\
-Set mips debugging.\n", "\
-Show mips debugging.\n", "\
-When non-zero, mips specific debugging is enabled.\n", "\
-Mips debugging is currently %s.\n",
- NULL, NULL,
+ &mips_debug, _("\
+Set mips debugging."), _("\
+Show mips debugging."), _("\
+When non-zero, mips specific debugging is enabled."),
+ NULL,
+ NULL, /* FIXME: i18n: Mips debugging is currently %s. */
&setdebuglist, &showdebuglist);
}