/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright (C) 1988-2012 Free Software Foundation, Inc.
+ Copyright (C) 1988-2014 Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
-#include "gdb_string.h"
+#include <string.h>
#include "gdb_assert.h"
#include "frame.h"
#include "inferior.h"
"special", i.e. refers to a MIPS16 or microMIPS function, and sets
one of the "special" bits in a minimal symbol to mark it accordingly.
The test checks an ELF-private flag that is valid for true function
- symbols only; in particular synthetic symbols such as for PLT stubs
- have no ELF-private part at all.
+ symbols only; for synthetic symbols such as for PLT stubs that have
+ no ELF-private part at all the MIPS BFD backend arranges for this
+ information to be carried in the asymbol's udata field instead.
msymbol_is_mips16 and msymbol_is_micromips test the "special" bit
in a minimal symbol. */
mips_elf_make_msymbol_special (asymbol * sym, struct minimal_symbol *msym)
{
elf_symbol_type *elfsym = (elf_symbol_type *) sym;
+ unsigned char st_other;
- if ((sym->flags & BSF_SYNTHETIC) != 0)
+ if ((sym->flags & BSF_SYNTHETIC) == 0)
+ st_other = elfsym->internal_elf_sym.st_other;
+ else if ((sym->flags & BSF_FUNCTION) != 0)
+ st_other = sym->udata.i;
+ else
return;
- if (ELF_ST_IS_MICROMIPS (elfsym->internal_elf_sym.st_other))
+ if (ELF_ST_IS_MICROMIPS (st_other))
MSYMBOL_TARGET_FLAG_2 (msym) = 1;
- else if (ELF_ST_IS_MIPS16 (elfsym->internal_elf_sym.st_other))
+ else if (ELF_ST_IS_MIPS16 (st_other))
MSYMBOL_TARGET_FLAG_1 (msym) = 1;
}
time across a 2400 baud serial line. Allows the user to limit this
search. */
-static unsigned int heuristic_fence_post = 0;
+static int heuristic_fence_post = 0;
/* Number of bytes of storage in the actual machine representation for
register N. NOTE: This defines the pseudo register type so need to
int
mips_pc_is_mips (CORE_ADDR memaddr)
{
- struct minimal_symbol *sym;
+ struct bound_minimal_symbol sym;
/* Flags indicating that this is a MIPS16 or microMIPS function is
stored by elfread.c in the high bit of the info field. Use this
to decide if the function is standard MIPS. Otherwise if bit 0
of the address is clear, then this is a standard MIPS function. */
sym = lookup_minimal_symbol_by_pc (memaddr);
- if (sym)
- return msymbol_is_mips (sym);
+ if (sym.minsym)
+ return msymbol_is_mips (sym.minsym);
else
return is_mips_addr (memaddr);
}
int
mips_pc_is_mips16 (struct gdbarch *gdbarch, CORE_ADDR memaddr)
{
- struct minimal_symbol *sym;
+ struct bound_minimal_symbol sym;
/* A flag indicating that this is a MIPS16 function is stored by
elfread.c in the high bit of the info field. Use this to decide
if the function is MIPS16. Otherwise if bit 0 of the address is
set, then ELF file flags will tell if this is a MIPS16 function. */
sym = lookup_minimal_symbol_by_pc (memaddr);
- if (sym)
- return msymbol_is_mips16 (sym);
+ if (sym.minsym)
+ return msymbol_is_mips16 (sym.minsym);
else
return is_mips16_addr (gdbarch, memaddr);
}
int
mips_pc_is_micromips (struct gdbarch *gdbarch, CORE_ADDR memaddr)
{
- struct minimal_symbol *sym;
+ struct bound_minimal_symbol sym;
/* A flag indicating that this is a microMIPS function is stored by
elfread.c in the high bit of the info field. Use this to decide
is set, then ELF file flags will tell if this is a microMIPS
function. */
sym = lookup_minimal_symbol_by_pc (memaddr);
- if (sym)
- return msymbol_is_micromips (sym);
+ if (sym.minsym)
+ return msymbol_is_micromips (sym.minsym);
else
return is_micromips_addr (gdbarch, memaddr);
}
static enum mips_isa
mips_pc_isa (struct gdbarch *gdbarch, CORE_ADDR memaddr)
{
- struct minimal_symbol *sym;
+ struct bound_minimal_symbol sym;
/* A flag indicating that this is a MIPS16 or a microMIPS function
is stored by elfread.c in the high bit of the info field. Use
MIPS. Otherwise if bit 0 of the address is set, then ELF file
flags will tell if this is a MIPS16 or a microMIPS function. */
sym = lookup_minimal_symbol_by_pc (memaddr);
- if (sym)
+ if (sym.minsym)
{
- if (msymbol_is_micromips (sym))
+ if (msymbol_is_micromips (sym.minsym))
return ISA_MICROMIPS;
- else if (msymbol_is_mips16 (sym))
+ else if (msymbol_is_mips16 (sym.minsym))
return ISA_MIPS16;
else
return ISA_MIPS;
mips_read_pc (struct regcache *regcache)
{
int regnum = gdbarch_pc_regnum (get_regcache_arch (regcache));
- ULONGEST pc;
+ LONGEST pc;
regcache_cooked_read_signed (regcache, regnum, &pc);
if (is_compact_addr (pc))
{
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
gdb_byte buf[8];
- pc &= 0xfffffffe; /* Clear the low order bit. */
+
+ pc = unmake_compact_addr (pc); /* Clear the low order bit. */
target_read_memory (pc, buf, 2);
return extract_unsigned_integer (buf, 2, byte_order);
}
/* The mips_next_pc function supports single_step when the remote
target monitor or stub is not developed enough to do a single_step.
It works by decoding the current instruction and predicting where a
- branch will go. This isnt hard because all the data is available.
+ branch will go. This isn't hard because all the data is available.
The MIPS32, MIPS16 and microMIPS variants are quite different. */
static CORE_ADDR
mips_next_pc (struct frame_info *frame, CORE_ADDR pc)
break;
/* LUI $v1 is used for larger $sp adjustments. */
- /* Discard LUI $gp is used for PIC code. */
+ /* Discard LUI $gp used for PIC code. */
case 0x10: /* POOL32I: bits 010000 */
if (b5s5_op (insn >> 16) == 0xd
/* LUI: bits 010000 001101 */
frame_reg = 30;
frame_addr = get_frame_register_signed
(this_frame, gdbarch_num_regs (gdbarch) + 30);
+ frame_offset = 0;
alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
if (alloca_adjust > 0)
gdb_byte dummy[4];
struct obj_section *s;
CORE_ADDR pc = get_frame_address_in_block (this_frame);
- struct minimal_symbol *msym;
+ struct bound_minimal_symbol msym;
/* Use the stub unwinder for unreadable code. */
if (target_read_memory (get_frame_pc (this_frame), dummy, 4) != 0)
return 1;
- if (in_plt_section (pc, NULL))
- return 1;
-
- /* Binutils for MIPS puts lazy resolution stubs into .MIPS.stubs. */
- s = find_pc_section (pc);
-
- if (s != NULL
- && strcmp (bfd_get_section_name (s->objfile->obfd, s->the_bfd_section),
- ".MIPS.stubs") == 0)
+ if (in_plt_section (pc) || in_mips_stubs_section (pc))
return 1;
/* Calling a PIC function from a non-PIC function passes through a
stub. The stub for foo is named ".pic.foo". */
msym = lookup_minimal_symbol_by_pc (pc);
- if (msym != NULL
- && SYMBOL_LINKAGE_NAME (msym) != NULL
- && strncmp (SYMBOL_LINKAGE_NAME (msym), ".pic.", 5) == 0)
+ if (msym.minsym != NULL
+ && MSYMBOL_LINKAGE_NAME (msym.minsym) != NULL
+ && strncmp (MSYMBOL_LINKAGE_NAME (msym.minsym), ".pic.", 5) == 0)
return 1;
return 0;
const int atomic_sequence_length = 16; /* Instruction sequence length. */
int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
CORE_ADDR breaks[2] = {-1, -1};
- CORE_ADDR branch_bp; /* Breakpoint at branch instruction's destination. */
+ CORE_ADDR branch_bp = 0; /* Breakpoint at branch instruction's
+ destination. */
CORE_ADDR loc = pc;
int sc_found = 0;
ULONGEST insn;
/* Effectively inserts the breakpoints. */
for (index = 0; index <= last_breakpoint; index++)
- insert_single_step_breakpoint (gdbarch, aspace, breaks[index]);
+ insert_single_step_breakpoint (gdbarch, aspace, breaks[index]);
return 1;
}
if (start_pc == 0)
return 0;
- if (heuristic_fence_post == UINT_MAX || fence < VM_MIN_ADDRESS)
+ if (heuristic_fence_post == -1 || fence < VM_MIN_ADDRESS)
fence = VM_MIN_ADDRESS;
instlen = mips_pc_is_mips (pc) ? MIPS_INSN32_SIZE : MIPS_INSN16_SIZE;
int raw_size = register_size (gdbarch, regno);
gdb_byte *raw_buffer = alloca (raw_size);
- if (!frame_register_read (frame, regno, raw_buffer))
+ if (!deprecated_frame_register_read (frame, regno, raw_buffer))
error (_("can't read register %d (%s)"),
regno, gdbarch_register_name (gdbarch, regno));
if (raw_size == 8)
{
/* We have a 64-bit value for this register, and we should use
all 64 bits. */
- if (!frame_register_read (frame, regno, rare_buffer))
+ if (!deprecated_frame_register_read (frame, regno, rare_buffer))
error (_("can't read register %d (%s)"),
regno, gdbarch_register_name (gdbarch, regno));
}
break; /* End row: large register. */
/* OK: get the data in raw format. */
- if (!frame_register_read (frame, regnum, raw_buffer))
+ if (!deprecated_frame_register_read (frame, regnum, raw_buffer))
error (_("can't read register %d (%s)"),
regnum, gdbarch_register_name (gdbarch, regnum));
/* pad small registers */
{
struct gdbarch *gdbarch = get_frame_arch (frame);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- struct minimal_symbol *msym;
+ struct bound_minimal_symbol msym;
int i;
gdb_byte stub_code[16];
int32_t stub_words[4];
instructions inserted before foo or a three instruction sequence
which jumps to foo. */
msym = lookup_minimal_symbol_by_pc (pc);
- if (msym == NULL
- || SYMBOL_VALUE_ADDRESS (msym) != pc
- || SYMBOL_LINKAGE_NAME (msym) == NULL
- || strncmp (SYMBOL_LINKAGE_NAME (msym), ".pic.", 5) != 0)
+ if (msym.minsym == NULL
+ || BMSYMBOL_VALUE_ADDRESS (msym) != pc
+ || MSYMBOL_LINKAGE_NAME (msym.minsym) == NULL
+ || strncmp (MSYMBOL_LINKAGE_NAME (msym.minsym), ".pic.", 5) != 0)
return 0;
/* A two-instruction header. */
- if (MSYMBOL_SIZE (msym) == 8)
+ if (MSYMBOL_SIZE (msym.minsym) == 8)
return pc + 8;
/* A three-instruction (plus delay slot) trampoline. */
- if (MSYMBOL_SIZE (msym) == 16)
+ if (MSYMBOL_SIZE (msym.minsym) == 16)
{
if (target_read_memory (pc, stub_code, 16) != 0)
return 0;
int i, num_regs;
enum mips_fpu_type fpu_type;
struct tdesc_arch_data *tdesc_data = NULL;
- int elf_fpu_type = 0;
+ int elf_fpu_type = Val_GNU_MIPS_ABI_FP_ANY;
const char **reg_names;
struct mips_regnum mips_regnum, *regnum;
enum mips_isa mips_isa;
if (!mips_fpu_type_auto)
fpu_type = mips_fpu_type;
- else if (elf_fpu_type != 0)
+ else if (elf_fpu_type != Val_GNU_MIPS_ABI_FP_ANY)
{
switch (elf_fpu_type)
{
- case 1:
+ case Val_GNU_MIPS_ABI_FP_DOUBLE:
fpu_type = MIPS_FPU_DOUBLE;
break;
- case 2:
+ case Val_GNU_MIPS_ABI_FP_SINGLE:
fpu_type = MIPS_FPU_SINGLE;
break;
- case 3:
+ case Val_GNU_MIPS_ABI_FP_SOFT:
default:
/* Soft float or unknown. */
fpu_type = MIPS_FPU_NONE;
tdep->mips_fpu_type = fpu_type;
tdep->register_size_valid_p = 0;
tdep->register_size = 0;
- tdep->gregset = NULL;
- tdep->gregset64 = NULL;
- tdep->fpregset = NULL;
- tdep->fpregset64 = NULL;
if (info.target_desc)
{