/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+ Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
#include "symcat.h"
#include "sim-regno.h"
#include "dis-asm.h"
+#include "frame-unwind.h"
+#include "frame-base.h"
+#include "trad-frame.h"
+#include "infcall.h"
+#include "floatformat.h"
+
+static const struct objfile_data *mips_pdr_data;
static void set_reg_offset (CORE_ADDR *saved_regs, int regnum, CORE_ADDR off);
static struct type *mips_register_type (struct gdbarch *gdbarch, int regnum);
};
struct frame_extra_info
- {
- mips_extra_func_info_t proc_desc;
- int num_args;
- };
+{
+ mips_extra_func_info_t proc_desc;
+ int num_args;
+};
/* Various MIPS ISA options (related to stack analysis) can be
overridden dynamically. Establish an enum/array for managing
};
/* Some MIPS boards don't support floating point while others only
- support single-precision floating-point operations. See also
- FP_REGISTER_DOUBLE. */
+ support single-precision floating-point operations. */
enum mips_fpu_type
- {
- MIPS_FPU_DOUBLE, /* Full double precision floating point. */
- MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
- MIPS_FPU_NONE /* No floating point. */
- };
+{
+ MIPS_FPU_DOUBLE, /* Full double precision floating point. */
+ MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
+ MIPS_FPU_NONE /* No floating point. */
+};
#ifndef MIPS_DEFAULT_FPU_TYPE
#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_DOUBLE
/* MIPS specific per-architecture information */
struct gdbarch_tdep
- {
- /* from the elf header */
- int elf_flags;
-
- /* mips options */
- enum mips_abi mips_abi;
- enum mips_abi found_abi;
- enum mips_fpu_type mips_fpu_type;
- int mips_last_arg_regnum;
- int mips_last_fp_arg_regnum;
- int mips_default_saved_regsize;
- int mips_fp_register_double;
- int mips_default_stack_argsize;
- int default_mask_address_p;
- /* Is the target using 64-bit raw integer registers but only
- storing a left-aligned 32-bit value in each? */
- int mips64_transfers_32bit_regs_p;
- /* Indexes for various registers. IRIX and embedded have
- different values. This contains the "public" fields. Don't
- add any that do not need to be public. */
- const struct mips_regnum *regnum;
- /* Register names table for the current register set. */
- const char **mips_processor_reg_names;
- };
+{
+ /* from the elf header */
+ int elf_flags;
+
+ /* mips options */
+ enum mips_abi mips_abi;
+ enum mips_abi found_abi;
+ enum mips_fpu_type mips_fpu_type;
+ int mips_last_arg_regnum;
+ int mips_last_fp_arg_regnum;
+ int default_mask_address_p;
+ /* Is the target using 64-bit raw integer registers but only
+ storing a left-aligned 32-bit value in each? */
+ int mips64_transfers_32bit_regs_p;
+ /* Indexes for various registers. IRIX and embedded have
+ different values. This contains the "public" fields. Don't
+ add any that do not need to be public. */
+ const struct mips_regnum *regnum;
+ /* Register names table for the current register set. */
+ const char **mips_processor_reg_names;
+};
+
+static int
+n32n64_floatformat_always_valid (const struct floatformat *fmt,
+ const char *from)
+{
+ return 1;
+}
+
+/* FIXME: brobecker/2004-08-08: Long Double values are 128 bit long.
+ They are implemented as a pair of 64bit doubles where the high
+ part holds the result of the operation rounded to double, and
+ the low double holds the difference between the exact result and
+ the rounded result. So "high" + "low" contains the result with
+ added precision. Unfortunately, the floatformat structure used
+ by GDB is not powerful enough to describe this format. As a temporary
+ measure, we define a 128bit floatformat that only uses the high part.
+ We lose a bit of precision but that's probably the best we can do
+ for now with the current infrastructure. */
+
+static const struct floatformat floatformat_n32n64_long_double_big =
+{
+ floatformat_big, 128, 0, 1, 11, 1023, 2047, 12, 52,
+ floatformat_intbit_no,
+ "floatformat_ieee_double_big",
+ n32n64_floatformat_always_valid
+};
const struct mips_regnum *
mips_regnum (struct gdbarch *gdbarch)
#define MIPS_FPU_TYPE (gdbarch_tdep (current_gdbarch)->mips_fpu_type)
-/* Return the currently configured (or set) saved register size. */
-
-#define MIPS_DEFAULT_SAVED_REGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_saved_regsize)
-
-static const char *mips_saved_regsize_string = size_auto;
-
-#define MIPS_SAVED_REGSIZE (mips_saved_regsize())
-
/* MIPS16 function addresses are odd (bit 0 is set). Here are some
functions to test, set, or clear bit 0 of addresses. */
{
void *buf = alloca (register_size (current_gdbarch, regnum));
deprecated_read_register_gen (regnum, buf);
- return (extract_signed_integer (buf, register_size (current_gdbarch, regnum)));
+ return (extract_signed_integer
+ (buf, register_size (current_gdbarch, regnum)));
}
static LONGEST
}
int
-mips_regsize (struct gdbarch *gdbarch)
+mips_isa_regsize (struct gdbarch *gdbarch)
{
return (gdbarch_bfd_arch_info (gdbarch)->bits_per_word
/ gdbarch_bfd_arch_info (gdbarch)->bits_per_byte);
}
+/* Return the currently configured (or set) saved register size. */
+
+static const char *mips_abi_regsize_string = size_auto;
+
static unsigned int
-mips_saved_regsize (void)
+mips_abi_regsize (struct gdbarch *gdbarch)
{
- if (mips_saved_regsize_string == size_auto)
- return MIPS_DEFAULT_SAVED_REGSIZE;
- else if (mips_saved_regsize_string == size_64)
+ if (mips_abi_regsize_string == size_auto)
+ switch (mips_abi (gdbarch))
+ {
+ case MIPS_ABI_EABI32:
+ case MIPS_ABI_O32:
+ return 4;
+ case MIPS_ABI_N32:
+ case MIPS_ABI_N64:
+ case MIPS_ABI_O64:
+ case MIPS_ABI_EABI64:
+ return 8;
+ case MIPS_ABI_UNKNOWN:
+ case MIPS_ABI_LAST:
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
+ }
+ else if (mips_abi_regsize_string == size_64)
return 8;
- else /* if (mips_saved_regsize_string == size_32) */
+ else /* if (mips_abi_regsize_string == size_32) */
return 4;
}
MSYMBOL_IS_SPECIAL tests the "special" bit in a minimal symbol */
static void
-mips_elf_make_msymbol_special (asymbol *sym, struct minimal_symbol *msym)
+mips_elf_make_msymbol_special (asymbol * sym, struct minimal_symbol *msym)
{
- if (((elf_symbol_type *)(sym))->internal_elf_sym.st_other == STO_MIPS16)
- {
- MSYMBOL_INFO (msym) = (char *)
- (((long) MSYMBOL_INFO (msym)) | 0x80000000);
- SYMBOL_VALUE_ADDRESS (msym) |= 1;
- }
+ if (((elf_symbol_type *) (sym))->internal_elf_sym.st_other == STO_MIPS16)
+ {
+ MSYMBOL_INFO (msym) = (char *)
+ (((long) MSYMBOL_INFO (msym)) | 0x80000000);
+ SYMBOL_VALUE_ADDRESS (msym) |= 1;
+ }
}
static int
static void
mips_xfer_register (struct regcache *regcache, int reg_num, int length,
- enum bfd_endian endian, bfd_byte *in, const bfd_byte *out,
- int buf_offset)
+ enum bfd_endian endian, bfd_byte * in,
+ const bfd_byte * out, int buf_offset)
{
- bfd_byte reg[MAX_REGISTER_SIZE];
int reg_offset = 0;
gdb_assert (reg_num >= NUM_REGS);
/* Need to transfer the left or right part of the register, based on
case BFD_ENDIAN_LITTLE:
reg_offset = 0;
break;
- case BFD_ENDIAN_UNKNOWN: /* Indicates no alignment. */
+ case BFD_ENDIAN_UNKNOWN: /* Indicates no alignment. */
reg_offset = 0;
break;
default:
fprintf_unfiltered (gdb_stdlog, "%02x", out[buf_offset + i]);
}
if (in != NULL)
- regcache_cooked_read_part (regcache, reg_num, reg_offset, length, in + buf_offset);
+ regcache_cooked_read_part (regcache, reg_num, reg_offset, length,
+ in + buf_offset);
if (out != NULL)
- regcache_cooked_write_part (regcache, reg_num, reg_offset, length, out + buf_offset);
+ regcache_cooked_write_part (regcache, reg_num, reg_offset, length,
+ out + buf_offset);
if (mips_debug && in != NULL)
{
int i;
{
/* MIPS1 and MIPS2 have only 32 bit FPRs, and the FR bit is not
meaningful. */
- if (register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0) == 4)
+ if (register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0) ==
+ 4)
return 0;
#if 0
return 0;
}
-/* Indicate that the ABI makes use of double-precision registers
- provided by the FPU (rather than combining pairs of registers to
- form double-precision values). See also MIPS_FPU_TYPE. */
-#define FP_REGISTER_DOUBLE (gdbarch_tdep (current_gdbarch)->mips_fp_register_double)
-
/* The amount of space reserved on the stack for registers. This is
- different to MIPS_SAVED_REGSIZE as it determines the alignment of
+ different to MIPS_ABI_REGSIZE as it determines the alignment of
data allocated after the registers have run out. */
-#define MIPS_DEFAULT_STACK_ARGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_stack_argsize)
-
-#define MIPS_STACK_ARGSIZE (mips_stack_argsize ())
-
static const char *mips_stack_argsize_string = size_auto;
static unsigned int
-mips_stack_argsize (void)
+mips_stack_argsize (struct gdbarch *gdbarch)
{
if (mips_stack_argsize_string == size_auto)
- return MIPS_DEFAULT_STACK_ARGSIZE;
+ return mips_abi_regsize (gdbarch);
else if (mips_stack_argsize_string == size_64)
return 8;
- else /* if (mips_stack_argsize_string == size_32) */
+ else /* if (mips_stack_argsize_string == size_32) */
return 4;
}
-#define MIPS_DEFAULT_MASK_ADDRESS_P (gdbarch_tdep (current_gdbarch)->default_mask_address_p)
-
#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
static mips_extra_func_info_t heuristic_proc_desc (CORE_ADDR, CORE_ADDR,
struct frame_info *, int);
+static mips_extra_func_info_t non_heuristic_proc_desc (CORE_ADDR pc,
+ CORE_ADDR *addrptr);
static CORE_ADDR heuristic_proc_start (CORE_ADDR);
mips_register_name(). Processor specific registers 32 and above
are listed in the followign tables. */
-enum { NUM_MIPS_PROCESSOR_REGS = (90 - 32) };
+enum
+{ NUM_MIPS_PROCESSOR_REGS = (90 - 32) };
/* Generic MIPS. */
static const char *mips_generic_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
- "sr", "lo", "hi", "bad", "cause","pc",
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", ""/*"fp"*/, "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir", "" /*"fp" */ , "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
};
/* Names of IDT R3041 registers. */
static const char *mips_r3041_reg_names[] = {
- "sr", "lo", "hi", "bad", "cause","pc",
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", "",/*"fp"*/ "",
- "", "", "bus", "ccfg", "", "", "", "",
- "", "", "port", "cmp", "", "", "epc", "prid",
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir", "", /*"fp" */ "",
+ "", "", "bus", "ccfg", "", "", "", "",
+ "", "", "port", "cmp", "", "", "epc", "prid",
};
/* Names of tx39 registers. */
static const char *mips_tx39_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
- "sr", "lo", "hi", "bad", "cause","pc",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "config", "cache", "debug", "depc", "epc", ""
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "config", "cache", "debug", "depc", "epc", ""
};
/* Names of IRIX registers. */
static const char *mips_irix_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "pc", "cause", "bad", "hi", "lo", "fsr", "fir"
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "pc", "cause", "bad", "hi", "lo", "fsr", "fir"
};
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
/* GPR names for all ABIs other than n32/n64. */
static char *mips_gpr_names[] = {
- "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
};
/* GPR names for n32 and n64 ABIs. */
static char *mips_n32_n64_gpr_names[] = {
- "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
- "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
};
enum mips_abi abi = mips_abi (current_gdbarch);
/* FIXME: cagney/2003-04-13: Can't yet use gdbarch_num_regs
(gdbarch), as not all architectures are multi-arch. */
raw_p = rawnum < NUM_REGS;
- if (REGISTER_NAME (regnum) == NULL
- || REGISTER_NAME (regnum)[0] == '\0')
+ if (REGISTER_NAME (regnum) == NULL || REGISTER_NAME (regnum)[0] == '\0')
return 0;
if (reggroup == float_reggroup)
return float_p && pseudo;
/* Restore the same pseudo register. */
if (reggroup == restore_reggroup)
return raw_p && pseudo;
- return 0;
+ return 0;
}
/* Map the symbol table registers which live in the range [1 *
NUM_REGS .. 2 * NUM_REGS) back onto the corresponding raw
- registers. */
+ registers. Take care of alignment and size problems. */
static void
mips_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
int cookednum, void *buf)
{
+ int rawnum = cookednum % NUM_REGS;
gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
- return regcache_raw_read (regcache, cookednum % NUM_REGS, buf);
+ if (register_size (gdbarch, rawnum) == register_size (gdbarch, cookednum))
+ regcache_raw_read (regcache, rawnum, buf);
+ else if (register_size (gdbarch, rawnum) >
+ register_size (gdbarch, cookednum))
+ {
+ if (gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p
+ || TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
+ regcache_raw_read_part (regcache, rawnum, 0, 4, buf);
+ else
+ regcache_raw_read_part (regcache, rawnum, 4, 4, buf);
+ }
+ else
+ internal_error (__FILE__, __LINE__, "bad register size");
}
static void
-mips_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
- int cookednum, const void *buf)
+mips_pseudo_register_write (struct gdbarch *gdbarch,
+ struct regcache *regcache, int cookednum,
+ const void *buf)
{
+ int rawnum = cookednum % NUM_REGS;
gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
- return regcache_raw_write (regcache, cookednum % NUM_REGS, buf);
+ if (register_size (gdbarch, rawnum) == register_size (gdbarch, cookednum))
+ regcache_raw_write (regcache, rawnum, buf);
+ else if (register_size (gdbarch, rawnum) >
+ register_size (gdbarch, cookednum))
+ {
+ if (gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p
+ || TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
+ regcache_raw_write_part (regcache, rawnum, 0, 4, buf);
+ else
+ regcache_raw_write_part (regcache, rawnum, 4, 4, buf);
+ }
+ else
+ internal_error (__FILE__, __LINE__, "bad register size");
}
/* Table to translate MIPS16 register field to actual register number. */
-static int mips16_to_32_reg[8] =
-{16, 17, 2, 3, 4, 5, 6, 7};
+static int mips16_to_32_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 };
/* Heuristic_proc_start may hunt through the text section for a long
time across a 2400 baud serial line. Allows the user to limit this
#define SET_PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym = _PROC_MAGIC_)
struct linked_proc_info
- {
- struct mips_extra_func_info info;
- struct linked_proc_info *next;
- }
+{
+ struct mips_extra_func_info info;
+ struct linked_proc_info *next;
+}
*linked_proc_desc_table = NULL;
/* Number of bytes of storage in the actual machine representation for
}
}
-/* Convert between RAW and VIRTUAL registers. The RAW register size
- defines the remote-gdb packet. */
-
-static int
-mips_register_convertible (int reg_nr)
-{
- if (gdbarch_tdep (current_gdbarch)->mips64_transfers_32bit_regs_p)
- return 0;
- else
- return (register_size (current_gdbarch, reg_nr) > register_size (current_gdbarch, reg_nr));
-}
-
-static void
-mips_register_convert_to_virtual (int n, struct type *virtual_type,
- char *raw_buf, char *virt_buf)
-{
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- memcpy (virt_buf,
- raw_buf + (register_size (current_gdbarch, n) - TYPE_LENGTH (virtual_type)),
- TYPE_LENGTH (virtual_type));
- else
- memcpy (virt_buf,
- raw_buf,
- TYPE_LENGTH (virtual_type));
-}
-
-static void
-mips_register_convert_to_raw (struct type *virtual_type, int n,
- const char *virt_buf, char *raw_buf)
-{
- memset (raw_buf, 0, register_size (current_gdbarch, n));
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- memcpy (raw_buf + (register_size (current_gdbarch, n) - TYPE_LENGTH (virtual_type)),
- virt_buf,
- TYPE_LENGTH (virtual_type));
- else
- memcpy (raw_buf,
- virt_buf,
- TYPE_LENGTH (virtual_type));
-}
+/* Convert to/from a register and the corresponding memory value. */
static int
mips_convert_register_p (int regnum, struct type *type)
{
return (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
&& register_size (current_gdbarch, regnum) == 4
- && (regnum) >= mips_regnum (current_gdbarch)->fp0 && (regnum) < mips_regnum (current_gdbarch)->fp0 + 32
- && TYPE_CODE(type) == TYPE_CODE_FLT
- && TYPE_LENGTH(type) == 8);
+ && (regnum % NUM_REGS) >= mips_regnum (current_gdbarch)->fp0
+ && (regnum % NUM_REGS) < mips_regnum (current_gdbarch)->fp0 + 32
+ && TYPE_CODE (type) == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8);
}
static void
&& (regnum % NUM_REGS) < mips_regnum (current_gdbarch)->fp0 + 32)
{
/* The floating-point registers raw, or cooked, always match
- mips_regsize(), and also map 1:1, byte for byte. */
+ mips_isa_regsize(), and also map 1:1, byte for byte. */
switch (gdbarch_byte_order (gdbarch))
{
case BFD_ENDIAN_BIG:
- if (mips_regsize (gdbarch) == 4)
+ if (mips_isa_regsize (gdbarch) == 4)
return builtin_type_ieee_single_big;
else
return builtin_type_ieee_double_big;
case BFD_ENDIAN_LITTLE:
- if (mips_regsize (gdbarch) == 4)
+ if (mips_isa_regsize (gdbarch) == 4)
return builtin_type_ieee_single_little;
else
return builtin_type_ieee_double_little;
internal_error (__FILE__, __LINE__, "bad switch");
}
}
- else if (regnum >= (NUM_REGS + mips_regnum (current_gdbarch)->fp_control_status)
- && regnum <= NUM_REGS + LAST_EMBED_REGNUM)
- /* The pseudo/cooked view of the embedded registers is always
- 32-bit. The raw view is handled below. */
- return builtin_type_int32;
- else if (regnum >= NUM_REGS && mips_regsize (gdbarch)
- && gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p)
- /* The target, while using a 64-bit register buffer, is only
- transfering 32-bits of each integer register. Reflect this in
- the cooked/pseudo register value. */
- return builtin_type_int32;
- else if (mips_regsize (gdbarch) == 8)
- /* 64-bit ISA. */
- return builtin_type_int64;
+ else if (regnum < NUM_REGS)
+ {
+ /* The raw or ISA registers. These are all sized according to
+ the ISA regsize. */
+ if (mips_isa_regsize (gdbarch) == 4)
+ return builtin_type_int32;
+ else
+ return builtin_type_int64;
+ }
else
- /* 32-bit ISA. */
- return builtin_type_int32;
+ {
+ /* The cooked or ABI registers. These are sized according to
+ the ABI (with a few complications). */
+ if (regnum >= (NUM_REGS
+ + mips_regnum (current_gdbarch)->fp_control_status)
+ && regnum <= NUM_REGS + LAST_EMBED_REGNUM)
+ /* The pseudo/cooked view of the embedded registers is always
+ 32-bit. The raw view is handled below. */
+ return builtin_type_int32;
+ else if (gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p)
+ /* The target, while possibly using a 64-bit register buffer,
+ is only transfering 32-bits of each integer register.
+ Reflect this in the cooked/pseudo (ABI) register value. */
+ return builtin_type_int32;
+ else if (mips_abi_regsize (gdbarch) == 4)
+ /* The ABI is restricted to 32-bit registers (the ISA could be
+ 32- or 64-bit). */
+ return builtin_type_int32;
+ else
+ /* 64-bit ABI. */
+ return builtin_type_int64;
+ }
}
/* TARGET_READ_SP -- Remove useless bits from the stack pointer. */
static CORE_ADDR
mips_read_sp (void)
{
- return read_signed_register (SP_REGNUM);
+ return read_signed_register (MIPS_SP_REGNUM);
}
/* Should the upper word of 64-bit addresses be zeroed? */
enum auto_boolean mask_address_var = AUTO_BOOLEAN_AUTO;
static int
-mips_mask_address_p (void)
+mips_mask_address_p (struct gdbarch_tdep *tdep)
{
switch (mask_address_var)
{
return 0;
break;
case AUTO_BOOLEAN_AUTO:
- return MIPS_DEFAULT_MASK_ADDRESS_P;
+ return tdep->default_mask_address_p;
default:
- internal_error (__FILE__, __LINE__,
- "mips_mask_address_p: bad switch");
+ internal_error (__FILE__, __LINE__, "mips_mask_address_p: bad switch");
return -1;
}
}
static void
show_mask_address (char *cmd, int from_tty, struct cmd_list_element *c)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
switch (mask_address_var)
{
case AUTO_BOOLEAN_TRUE:
printf_filtered ("The 32 bit mips address mask is disabled\n");
break;
case AUTO_BOOLEAN_AUTO:
- printf_filtered ("The 32 bit address mask is set automatically. Currently %s\n",
- mips_mask_address_p () ? "enabled" : "disabled");
+ printf_filtered
+ ("The 32 bit address mask is set automatically. Currently %s\n",
+ mips_mask_address_p (tdep) ? "enabled" : "disabled");
break;
default:
- internal_error (__FILE__, __LINE__,
- "show_mask_address: bad switch");
+ internal_error (__FILE__, __LINE__, "show_mask_address: bad switch");
break;
}
}
-/* Should call_function allocate stack space for a struct return? */
-
-static int
-mips_eabi_use_struct_convention (int gcc_p, struct type *type)
-{
- return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE);
-}
-
-/* Should call_function pass struct by reference?
- For each architecture, structs are passed either by
- value or by reference, depending on their size. */
-
-static int
-mips_eabi_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- enum type_code typecode = TYPE_CODE (check_typedef (type));
- int len = TYPE_LENGTH (check_typedef (type));
-
- if (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
- return (len > MIPS_SAVED_REGSIZE);
-
- return 0;
-}
-
-static int
-mips_n32n64_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- return 0; /* Assumption: N32/N64 never passes struct by ref. */
-}
-
-static int
-mips_o32_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- return 0; /* Assumption: O32/O64 never passes struct by ref. */
-}
-
/* Tell if the program counter value in MEMADDR is in a MIPS16 function. */
static int
return 0;
}
-/* MIPS believes that the PC has a sign extended value. Perhaphs the
+/* MIPS believes that the PC has a sign extended value. Perhaps the
all registers should be sign extended for simplicity? */
static CORE_ADDR
mips_read_pc (ptid_t ptid)
{
- return read_signed_register_pid (PC_REGNUM, ptid);
+ return read_signed_register_pid (mips_regnum (current_gdbarch)->pc, ptid);
+}
+
+static CORE_ADDR
+mips_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_unwind_register_signed (next_frame,
+ NUM_REGS + mips_regnum (gdbarch)->pc);
+}
+
+/* Assuming NEXT_FRAME->prev is a dummy, return the frame ID of that
+ dummy frame. The frame ID's base needs to match the TOS value
+ saved by save_dummy_frame_tos(), and the PC match the dummy frame's
+ breakpoint. */
+
+static struct frame_id
+mips_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_id_build (frame_unwind_register_signed (next_frame, NUM_REGS + MIPS_SP_REGNUM),
+ frame_pc_unwind (next_frame));
+}
+
+static void
+mips_write_pc (CORE_ADDR pc, ptid_t ptid)
+{
+ write_register_pid (mips_regnum (current_gdbarch)->pc, pc, ptid);
}
/* This returns the PC of the first inst after the prologue. If we can't
find the prologue, then return 0. */
static CORE_ADDR
-after_prologue (CORE_ADDR pc,
- mips_extra_func_info_t proc_desc)
+after_prologue (CORE_ADDR pc, mips_extra_func_info_t proc_desc)
{
struct symtab_and_line sal;
CORE_ADDR func_addr, func_end;
{
/* If function is frameless, then we need to do it the hard way. I
strongly suspect that frameless always means prologueless... */
- if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+ if (PROC_FRAME_REG (proc_desc) == MIPS_SP_REGNUM
&& PROC_FRAME_OFFSET (proc_desc) == 0)
return 0;
}
{
int reg;
- if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */
+ if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */
|| (inst & 0xffe00000) == 0xafc00000 /* sw reg,n($r30) */
|| (inst & 0xffe00000) == 0xffa00000) /* sd reg,n($sp) */
{
*gen_mask |= (1 << reg);
}
else if ((inst & 0xffe00000) == 0xe7a00000 /* swc1 freg,n($sp) */
- || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
+ || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
|| (inst & 0xffe00000) == 0xf7a00000) /* sdc1 freg,n($sp) */
{
}
else
instlen = MIPS_INSTLEN;
- status = read_memory_nobpt (addr, buf, instlen);
+ status = deprecated_read_memory_nobpt (addr, buf, instlen);
+ if (status)
+ memory_error (status, addr);
+ return extract_unsigned_integer (buf, instlen);
+}
+
+static ULONGEST
+mips16_fetch_instruction (CORE_ADDR addr)
+{
+ char buf[MIPS_INSTLEN];
+ int instlen;
+ int status;
+
+ instlen = MIPS16_INSTLEN;
+ addr = unmake_mips16_addr (addr);
+ status = deprecated_read_memory_nobpt (addr, buf, instlen);
+ if (status)
+ memory_error (status, addr);
+ return extract_unsigned_integer (buf, instlen);
+}
+
+static ULONGEST
+mips32_fetch_instruction (CORE_ADDR addr)
+{
+ char buf[MIPS_INSTLEN];
+ int instlen;
+ int status;
+ instlen = MIPS_INSTLEN;
+ status = deprecated_read_memory_nobpt (addr, buf, instlen);
if (status)
memory_error (status, addr);
return extract_unsigned_integer (buf, instlen);
if ((inst & 0xe0000000) != 0) /* Not a special, jump or branch instruction */
{
if (itype_op (inst) >> 2 == 5)
- /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
+ /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
{
op = (itype_op (inst) & 0x03);
switch (op)
}
}
else if (itype_op (inst) == 17 && itype_rs (inst) == 8)
- /* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
+ /* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
{
int tf = itype_rt (inst) & 0x01;
int cnum = itype_rt (inst) >> 2;
- int fcrcs = read_signed_register (mips_regnum (current_gdbarch)->fp_control_status);
+ int fcrcs =
+ read_signed_register (mips_regnum (current_gdbarch)->
+ fp_control_status);
int cond = ((fcrcs >> 24) & 0x0e) | ((fcrcs >> 23) & 0x01);
if (((cond >> cnum) & 0x01) == tf)
pc += 4;
}
- break; /* end SPECIAL */
+ break; /* end SPECIAL */
case 1: /* REGIMM */
{
op = itype_rt (inst); /* branch condition */
case 3: /* BGEZL */
case 17: /* BGEZAL */
case 19: /* BGEZALL */
- greater_equal_branch:
if (read_signed_register (itype_rs (inst)) >= 0)
pc += mips32_relative_offset (inst) + 4;
else
pc += 4;
}
}
- break; /* end REGIMM */
+ break; /* end REGIMM */
case 2: /* J */
case 3: /* JAL */
{
pc += 8;
break;
case 6: /* BLEZ, BLEZL */
- less_zero_branch:
if (read_signed_register (itype_rs (inst) <= 0))
pc += mips32_relative_offset (inst) + 4;
else
/* I am heaping all the fields of the formats into one structure and
then, only the fields which are involved in instruction extension */
struct upk_mips16
- {
- CORE_ADDR offset;
- unsigned int regx; /* Function in i8 type */
- unsigned int regy;
- };
+{
+ CORE_ADDR offset;
+ unsigned int regx; /* Function in i8 type */
+ unsigned int regy;
+};
/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same format
unpack_mips16 (CORE_ADDR pc,
unsigned int extension,
unsigned int inst,
- enum mips16_inst_fmts insn_format,
- struct upk_mips16 *upk)
+ enum mips16_inst_fmts insn_format, struct upk_mips16 *upk)
{
CORE_ADDR offset;
int regx;
{
value = extended_offset (extension);
value = value << 11; /* rom for the original value */
- value |= inst & 0x7ff; /* eleven bits from instruction */
+ value |= inst & 0x7ff; /* eleven bits from instruction */
}
else
{
break;
}
default:
- internal_error (__FILE__, __LINE__,
- "bad switch");
+ internal_error (__FILE__, __LINE__, "bad switch");
}
upk->offset = offset;
upk->regx = regx;
static CORE_ADDR
extended_mips16_next_pc (CORE_ADDR pc,
- unsigned int extension,
- unsigned int insn)
+ unsigned int extension, unsigned int insn)
{
int op = (insn >> 11);
switch (op)
{
- case 2: /* Branch */
+ case 2: /* Branch */
{
CORE_ADDR offset;
struct upk_mips16 upk;
pc += (offset << 1) + 2;
break;
}
- case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
+ case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
{
struct upk_mips16 upk;
unpack_mips16 (pc, extension, insn, jalxtype, &upk);
pc |= 0x01;
break;
}
- case 4: /* beqz */
+ case 4: /* beqz */
{
struct upk_mips16 upk;
int reg;
pc += 2;
break;
}
- case 5: /* bnez */
+ case 5: /* bnez */
{
struct upk_mips16 upk;
int reg;
pc += 2;
break;
}
- case 12: /* I8 Formats btez btnez */
+ case 12: /* I8 Formats btez btnez */
{
struct upk_mips16 upk;
int reg;
pc += 2;
break;
}
- case 29: /* RR Formats JR, JALR, JALR-RA */
+ case 29: /* RR Formats JR, JALR, JALR-RA */
{
struct upk_mips16 upk;
/* upk.fmt = rrtype; */
break;
case 1:
reg = 31;
- break; /* Function return instruction */
+ break; /* Function return instruction */
case 2:
reg = upk.regx;
break;
default:
reg = 31;
- break; /* BOGUS Guess */
+ break; /* BOGUS Guess */
}
pc = read_signed_register (reg);
}
return mips32_next_pc (pc);
}
-/* Set up the 'saved_regs' array. This is a data structure containing
- the addresses on the stack where each register has been saved, for
- each stack frame. Registers that have not been saved will have
- zero here. The stack pointer register is special: rather than the
- address where the stack register has been saved,
- saved_regs[SP_REGNUM] will have the actual value of the previous
- frame's stack register. */
+struct mips_frame_cache
+{
+ CORE_ADDR base;
+ struct trad_frame_saved_reg *saved_regs;
+};
+
-static void
-mips_find_saved_regs (struct frame_info *fci)
+static struct mips_frame_cache *
+mips_mdebug_frame_cache (struct frame_info *next_frame, void **this_cache)
{
- int ireg;
+ mips_extra_func_info_t proc_desc;
+ struct mips_frame_cache *cache;
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* r0 bit means kernel trap */
int kernel_trap;
/* What registers have been saved? Bitmasks. */
unsigned long gen_mask, float_mask;
- mips_extra_func_info_t proc_desc;
- t_inst inst;
- CORE_ADDR *saved_regs;
-
- if (deprecated_get_frame_saved_regs (fci) != NULL)
- return;
- saved_regs = frame_saved_regs_zalloc (fci);
-
- /* If it is the frame for sigtramp, the saved registers are located
- in a sigcontext structure somewhere on the stack. If the stack
- layout for sigtramp changes we might have to change these
- constants and the companion fixup_sigtramp in mdebugread.c */
-#ifndef SIGFRAME_BASE
- /* To satisfy alignment restrictions, sigcontext is located 4 bytes
- above the sigtramp frame. */
-#define SIGFRAME_BASE mips_regsize (current_gdbarch)
-/* FIXME! Are these correct?? */
-#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * mips_regsize (current_gdbarch))
-#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 3 * mips_regsize (current_gdbarch))
-#define SIGFRAME_FPREGSAVE_OFF \
- (SIGFRAME_REGSAVE_OFF + MIPS_NUMREGS * mips_regsize (current_gdbarch) + 3 * mips_regsize (current_gdbarch))
-#endif
-#ifndef SIGFRAME_REG_SIZE
- /* FIXME! Is this correct?? */
-#define SIGFRAME_REG_SIZE mips_regsize (current_gdbarch)
-#endif
- if ((get_frame_type (fci) == SIGTRAMP_FRAME))
- {
- for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
- {
- CORE_ADDR reg_position = (get_frame_base (fci) + SIGFRAME_REGSAVE_OFF
- + ireg * SIGFRAME_REG_SIZE);
- set_reg_offset (saved_regs, ireg, reg_position);
- }
- for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
- {
- CORE_ADDR reg_position = (get_frame_base (fci)
- + SIGFRAME_FPREGSAVE_OFF
- + ireg * SIGFRAME_REG_SIZE);
- set_reg_offset (saved_regs, mips_regnum (current_gdbarch)->fp0 + ireg, reg_position);
- }
- set_reg_offset (saved_regs, PC_REGNUM, get_frame_base (fci) + SIGFRAME_PC_OFF);
- /* SP_REGNUM, contains the value and not the address. */
- set_reg_offset (saved_regs, SP_REGNUM, get_frame_base (fci));
- return;
- }
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
- proc_desc = get_frame_extra_info (fci)->proc_desc;
+ /* Get the mdebug proc descriptor. */
+ proc_desc = find_proc_desc (frame_pc_unwind (next_frame), next_frame, 1);
if (proc_desc == NULL)
/* I'm not sure how/whether this can happen. Normally when we
can't find a proc_desc, we "synthesize" one using
heuristic_proc_desc and set the saved_regs right away. */
- return;
+ return cache;
+
+ /* Extract the frame's base. */
+ cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
+ + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
kernel_trap = PROC_REG_MASK (proc_desc) & 1;
gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
-
- if (/* In any frame other than the innermost or a frame interrupted
- by a signal, we assume that all registers have been saved.
- This assumes that all register saves in a function happen
- before the first function call. */
- (get_next_frame (fci) == NULL
- || (get_frame_type (get_next_frame (fci)) == SIGTRAMP_FRAME))
-
- /* In a dummy frame we know exactly where things are saved. */
- && !PROC_DESC_IS_DUMMY (proc_desc)
-
- /* Don't bother unless we are inside a function prologue.
- Outside the prologue, we know where everything is. */
-
- && in_prologue (get_frame_pc (fci), PROC_LOW_ADDR (proc_desc))
-
- /* Not sure exactly what kernel_trap means, but if it means the
- kernel saves the registers without a prologue doing it, we
- better not examine the prologue to see whether registers
- have been saved yet. */
- && !kernel_trap)
+
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc))
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we
+ better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
{
/* We need to figure out whether the registers that the
proc_desc claims are saved have been saved yet. */
/* Bitmasks; set if we have found a save for the register. */
unsigned long gen_save_found = 0;
unsigned long float_save_found = 0;
- int instlen;
+ int mips16;
/* If the address is odd, assume this is MIPS16 code. */
addr = PROC_LOW_ADDR (proc_desc);
- instlen = pc_is_mips16 (addr) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+ mips16 = pc_is_mips16 (addr);
/* Scan through this function's instructions preceding the
current PC, and look for those that save registers. */
- while (addr < get_frame_pc (fci))
+ while (addr < frame_pc_unwind (next_frame))
{
- inst = mips_fetch_instruction (addr);
- if (pc_is_mips16 (addr))
- mips16_decode_reg_save (inst, &gen_save_found);
+ if (mips16)
+ {
+ mips16_decode_reg_save (mips16_fetch_instruction (addr),
+ &gen_save_found);
+ addr += MIPS16_INSTLEN;
+ }
else
- mips32_decode_reg_save (inst, &gen_save_found, &float_save_found);
- addr += instlen;
+ {
+ mips32_decode_reg_save (mips32_fetch_instruction (addr),
+ &gen_save_found, &float_save_found);
+ addr += MIPS_INSTLEN;
+ }
}
gen_mask = gen_save_found;
float_mask = float_save_found;
/* Fill in the offsets for the registers which gen_mask says were
saved. */
{
- CORE_ADDR reg_position = (get_frame_base (fci)
+ CORE_ADDR reg_position = (cache->base
+ PROC_REG_OFFSET (proc_desc));
+ int ireg;
for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
if (gen_mask & 0x80000000)
{
- set_reg_offset (saved_regs, ireg, reg_position);
- reg_position -= MIPS_SAVED_REGSIZE;
+ cache->saved_regs[NUM_REGS + ireg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
}
instruction that saves $s0 or $s1, correct their saved addresses. */
if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
{
- inst = mips_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+ ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc));
if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
/* entry */
{
int sreg_count = (inst >> 6) & 3;
/* Check if the ra register was pushed on the stack. */
- CORE_ADDR reg_position = (get_frame_base (fci)
+ CORE_ADDR reg_position = (cache->base
+ PROC_REG_OFFSET (proc_desc));
if (inst & 0x20)
- reg_position -= MIPS_SAVED_REGSIZE;
+ reg_position -= mips_abi_regsize (gdbarch);
/* Check if the s0 and s1 registers were pushed on the
- stack. */
+ stack. */
+ /* NOTE: cagney/2004-02-08: Huh? This is doing no such
+ check. */
for (reg = 16; reg < sreg_count + 16; reg++)
{
- set_reg_offset (saved_regs, reg, reg_position);
- reg_position -= MIPS_SAVED_REGSIZE;
+ cache->saved_regs[NUM_REGS + reg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
}
}
/* Fill in the offsets for the registers which float_mask says were
saved. */
{
- CORE_ADDR reg_position = (get_frame_base (fci)
+ CORE_ADDR reg_position = (cache->base
+ PROC_FREG_OFFSET (proc_desc));
-
+ int ireg;
/* Fill in the offsets for the float registers which float_mask
says were saved. */
for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
if (float_mask & 0x80000000)
{
- if (MIPS_SAVED_REGSIZE == 4 && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ if (mips_abi_regsize (gdbarch) == 4
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
/* On a big endian 32 bit ABI, floating point registers
- are paired to form doubles such that the most
- significant part is in $f[N+1] and the least
- significant in $f[N] vis: $f[N+1] ||| $f[N]. The
- registers are also spilled as a pair and stored as a
- double.
+ are paired to form doubles such that the most
+ significant part is in $f[N+1] and the least
+ significant in $f[N] vis: $f[N+1] ||| $f[N]. The
+ registers are also spilled as a pair and stored as a
+ double.
When little-endian the least significant part is
stored first leading to the memory order $f[N] and
then $f[N+1].
- Unfortunately, when big-endian the most significant
- part of the double is stored first, and the least
- significant is stored second. This leads to the
- registers being ordered in memory as firt $f[N+1] and
- then $f[N].
-
- For the big-endian case make certain that the
- addresses point at the correct (swapped) locations
- $f[N] and $f[N+1] pair (keep in mind that
- reg_position is decremented each time through the
- loop). */
+ Unfortunately, when big-endian the most significant
+ part of the double is stored first, and the least
+ significant is stored second. This leads to the
+ registers being ordered in memory as firt $f[N+1] and
+ then $f[N].
+
+ For the big-endian case make certain that the
+ addresses point at the correct (swapped) locations
+ $f[N] and $f[N+1] pair (keep in mind that
+ reg_position is decremented each time through the
+ loop). */
if ((ireg & 1))
- set_reg_offset (saved_regs, mips_regnum (current_gdbarch)->fp0 + ireg,
- reg_position - MIPS_SAVED_REGSIZE);
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position - mips_abi_regsize (gdbarch);
else
- set_reg_offset (saved_regs, mips_regnum (current_gdbarch)->fp0 + ireg,
- reg_position + MIPS_SAVED_REGSIZE);
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position + mips_abi_regsize (gdbarch);
}
else
- set_reg_offset (saved_regs, mips_regnum (current_gdbarch)->fp0 + ireg, reg_position);
- reg_position -= MIPS_SAVED_REGSIZE;
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
- set_reg_offset (saved_regs, PC_REGNUM, saved_regs[RA_REGNUM]);
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc]
+ = cache->saved_regs[NUM_REGS + RA_REGNUM];
}
/* SP_REGNUM, contains the value and not the address. */
- set_reg_offset (saved_regs, SP_REGNUM, get_frame_base (fci));
+ trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
+
+ return (*this_cache);
}
-static CORE_ADDR
-read_next_frame_reg (struct frame_info *fi, int regno)
+static void
+mips_mdebug_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
{
- /* Always a pseudo. */
- gdb_assert (regno >= NUM_REGS);
- if (fi == NULL)
- {
- LONGEST val;
- regcache_cooked_read_signed (current_regcache, regno, &val);
- return val;
- }
- else if ((regno % NUM_REGS) == SP_REGNUM)
- /* The SP_REGNUM is special, its value is stored in saved_regs.
- In fact, it is so special that it can even only be fetched
- using a raw register number! Once this code as been converted
- to frame-unwind the problem goes away. */
- return frame_unwind_register_signed (fi, regno % NUM_REGS);
- else
- return frame_unwind_register_signed (fi, regno);
-
+ struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ this_cache);
+ (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
}
-/* mips_addr_bits_remove - remove useless address bits */
-
-static CORE_ADDR
-mips_addr_bits_remove (CORE_ADDR addr)
+static void
+mips_mdebug_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
{
- if (mips_mask_address_p ()
- && (((ULONGEST) addr) >> 32 == 0xffffffffUL))
- /* This hack is a work-around for existing boards using PMON, the
- simulator, and any other 64-bit targets that doesn't have true
- 64-bit addressing. On these targets, the upper 32 bits of
- addresses are ignored by the hardware. Thus, the PC or SP are
- likely to have been sign extended to all 1s by instruction
- sequences that load 32-bit addresses. For example, a typical
- piece of code that loads an address is this:
+ struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ this_cache);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
- lui $r2, <upper 16 bits>
- ori $r2, <lower 16 bits>
+static const struct frame_unwind mips_mdebug_frame_unwind =
+{
+ NORMAL_FRAME,
+ mips_mdebug_frame_this_id,
+ mips_mdebug_frame_prev_register
+};
- But the lui sign-extends the value such that the upper 32 bits
- may be all 1s. The workaround is simply to mask off these
- bits. In the future, gcc may be changed to support true 64-bit
- addressing, and this masking will have to be disabled. */
- return addr &= 0xffffffffUL;
- else
- return addr;
-}
+static const struct frame_unwind *
+mips_mdebug_frame_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ CORE_ADDR startaddr = 0;
+ mips_extra_func_info_t proc_desc;
+ int kernel_trap;
-/* mips_software_single_step() is called just before we want to resume
- the inferior, if we want to single-step it but there is no hardware
- or kernel single-step support (MIPS on GNU/Linux for example). We find
- the target of the coming instruction and breakpoint it.
+ /* Only use the mdebug frame unwinder on mdebug frames where all the
+ registers have been saved. Leave hard cases such as no mdebug or
+ in prologue for the heuristic unwinders. */
- single_step is also called just after the inferior stops. If we had
- set up a simulated single-step, we undo our damage. */
+ proc_desc = non_heuristic_proc_desc (pc, &startaddr);
+ if (proc_desc == NULL)
+ return NULL;
-void
-mips_software_single_step (enum target_signal sig, int insert_breakpoints_p)
-{
- static CORE_ADDR next_pc;
- typedef char binsn_quantum[BREAKPOINT_MAX];
- static binsn_quantum break_mem;
- CORE_ADDR pc;
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we better
+ not examine the prologue to see whether registers have been saved
+ yet. */
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ if (kernel_trap)
+ return &mips_mdebug_frame_unwind;
- if (insert_breakpoints_p)
- {
- pc = read_register (PC_REGNUM);
- next_pc = mips_next_pc (pc);
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (!in_prologue (pc, PROC_LOW_ADDR (proc_desc)))
+ return &mips_mdebug_frame_unwind;
- target_insert_breakpoint (next_pc, break_mem);
- }
- else
- target_remove_breakpoint (next_pc, break_mem);
+ return NULL;
}
static CORE_ADDR
-mips_init_frame_pc_first (int fromleaf, struct frame_info *prev)
+mips_mdebug_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
{
- CORE_ADDR pc, tmp;
-
- pc = ((fromleaf)
- ? DEPRECATED_SAVED_PC_AFTER_CALL (get_next_frame (prev))
- : get_next_frame (prev)
- ? DEPRECATED_FRAME_SAVED_PC (get_next_frame (prev))
- : read_pc ());
- tmp = SKIP_TRAMPOLINE_CODE (pc);
- return tmp ? tmp : pc;
+ struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ this_cache);
+ return info->base;
}
+static const struct frame_base mips_mdebug_frame_base = {
+ &mips_mdebug_frame_unwind,
+ mips_mdebug_frame_base_address,
+ mips_mdebug_frame_base_address,
+ mips_mdebug_frame_base_address
+};
-static CORE_ADDR
-mips_frame_saved_pc (struct frame_info *frame)
+static const struct frame_base *
+mips_mdebug_frame_base_sniffer (struct frame_info *next_frame)
{
- CORE_ADDR saved_pc;
-
- if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0))
- {
- LONGEST tmp;
- /* Always unwind the cooked PC register value. */
- frame_unwind_signed_register (frame, NUM_REGS + PC_REGNUM, &tmp);
- saved_pc = tmp;
- }
+ if (mips_mdebug_frame_sniffer (next_frame) != NULL)
+ return &mips_mdebug_frame_base;
else
- {
- mips_extra_func_info_t proc_desc
- = get_frame_extra_info (frame)->proc_desc;
- if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
- saved_pc = read_memory_integer (get_frame_base (frame) - MIPS_SAVED_REGSIZE, MIPS_SAVED_REGSIZE);
- else
- {
- /* We have to get the saved pc from the sigcontext if it is
- a signal handler frame. */
- int pcreg = (get_frame_type (frame) == SIGTRAMP_FRAME ? PC_REGNUM
- : proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM);
- saved_pc = read_next_frame_reg (frame, NUM_REGS + pcreg);
- }
- }
- return ADDR_BITS_REMOVE (saved_pc);
+ return NULL;
}
-static struct mips_extra_func_info temp_proc_desc;
+/* Heuristic unwinder for 16-bit MIPS instruction set (aka MIPS16).
+ Procedures that use the 32-bit instruction set are handled by the
+ mips_insn32 unwinder. */
-/* This hack will go away once the get_prev_frame() code has been
- modified to set the frame's type first. That is BEFORE init extra
- frame info et.al. is called. This is because it will become
- possible to skip the init extra info call for sigtramp and dummy
- frames. */
-static CORE_ADDR *temp_saved_regs;
+static struct mips_frame_cache *
+mips_insn16_frame_cache (struct frame_info *next_frame, void **this_cache)
+{
+ mips_extra_func_info_t proc_desc;
+ struct mips_frame_cache *cache;
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ /* r0 bit means kernel trap */
+ int kernel_trap;
+ /* What registers have been saved? Bitmasks. */
+ unsigned long gen_mask, float_mask;
-/* Set a register's saved stack address in temp_saved_regs. If an
- address has already been set for this register, do nothing; this
- way we will only recognize the first save of a given register in a
- function prologue.
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
- For simplicity, save the address in both [0 .. NUM_REGS) and
- [NUM_REGS .. 2*NUM_REGS). Strictly speaking, only the second range
- is used as it is only second range (the ABI instead of ISA
- registers) that comes into play when finding saved registers in a
- frame. */
+ /* Get the mdebug proc descriptor. */
+ proc_desc = find_proc_desc (frame_pc_unwind (next_frame), next_frame, 1);
+ if (proc_desc == NULL)
+ /* I'm not sure how/whether this can happen. Normally when we
+ can't find a proc_desc, we "synthesize" one using
+ heuristic_proc_desc and set the saved_regs right away. */
+ return cache;
-static void
-set_reg_offset (CORE_ADDR *saved_regs, int regno, CORE_ADDR offset)
-{
- if (saved_regs[regno] == 0)
- {
- saved_regs[regno + 0 * NUM_REGS] = offset;
- saved_regs[regno + 1 * NUM_REGS] = offset;
- }
-}
+ /* Extract the frame's base. */
+ cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
+ + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
+ float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
+
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc))
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we
+ better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
+ {
+ /* We need to figure out whether the registers that the
+ proc_desc claims are saved have been saved yet. */
-/* Test whether the PC points to the return instruction at the
- end of a function. */
+ CORE_ADDR addr;
-static int
-mips_about_to_return (CORE_ADDR pc)
-{
- if (pc_is_mips16 (pc))
- /* This mips16 case isn't necessarily reliable. Sometimes the compiler
- generates a "jr $ra"; other times it generates code to load
- the return address from the stack to an accessible register (such
- as $a3), then a "jr" using that register. This second case
- is almost impossible to distinguish from an indirect jump
- used for switch statements, so we don't even try. */
- return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */
- else
- return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */
-}
+ /* Bitmasks; set if we have found a save for the register. */
+ unsigned long gen_save_found = 0;
+ unsigned long float_save_found = 0;
+ int mips16;
+ /* If the address is odd, assume this is MIPS16 code. */
+ addr = PROC_LOW_ADDR (proc_desc);
+ mips16 = pc_is_mips16 (addr);
-/* This fencepost looks highly suspicious to me. Removing it also
- seems suspicious as it could affect remote debugging across serial
- lines. */
+ /* Scan through this function's instructions preceding the
+ current PC, and look for those that save registers. */
+ while (addr < frame_pc_unwind (next_frame))
+ {
+ if (mips16)
+ {
+ mips16_decode_reg_save (mips16_fetch_instruction (addr),
+ &gen_save_found);
+ addr += MIPS16_INSTLEN;
+ }
+ else
+ {
+ mips32_decode_reg_save (mips32_fetch_instruction (addr),
+ &gen_save_found, &float_save_found);
+ addr += MIPS_INSTLEN;
+ }
+ }
+ gen_mask = gen_save_found;
+ float_mask = float_save_found;
+ }
-static CORE_ADDR
-heuristic_proc_start (CORE_ADDR pc)
-{
- CORE_ADDR start_pc;
- CORE_ADDR fence;
- int instlen;
- int seen_adjsp = 0;
+ /* Fill in the offsets for the registers which gen_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ int ireg;
+ for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
+ if (gen_mask & 0x80000000)
+ {
+ cache->saved_regs[NUM_REGS + ireg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
+ }
- pc = ADDR_BITS_REMOVE (pc);
- start_pc = pc;
- fence = start_pc - heuristic_fence_post;
- if (start_pc == 0)
- return 0;
+ /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse
+ order of that normally used by gcc. Therefore, we have to fetch
+ the first instruction of the function, and if it's an entry
+ instruction that saves $s0 or $s1, correct their saved addresses. */
+ if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
+ {
+ ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
+ /* entry */
+ {
+ int reg;
+ int sreg_count = (inst >> 6) & 3;
- if (heuristic_fence_post == UINT_MAX
- || fence < VM_MIN_ADDRESS)
- fence = VM_MIN_ADDRESS;
+ /* Check if the ra register was pushed on the stack. */
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ if (inst & 0x20)
+ reg_position -= mips_abi_regsize (gdbarch);
- instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+ /* Check if the s0 and s1 registers were pushed on the
+ stack. */
+ /* NOTE: cagney/2004-02-08: Huh? This is doing no such
+ check. */
+ for (reg = 16; reg < sreg_count + 16; reg++)
+ {
+ cache->saved_regs[NUM_REGS + reg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
+ }
+ }
- /* search back for previous return */
- for (start_pc -= instlen;; start_pc -= instlen)
- if (start_pc < fence)
- {
- /* It's not clear to me why we reach this point when
- stop_soon, but with this test, at least we
- don't print out warnings for every child forked (eg, on
- decstation). 22apr93 rich@cygnus.com. */
- if (stop_soon == NO_STOP_QUIETLY)
- {
- static int blurb_printed = 0;
+ /* Fill in the offsets for the registers which float_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_FREG_OFFSET (proc_desc));
+ int ireg;
+ /* Fill in the offsets for the float registers which float_mask
+ says were saved. */
+ for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
+ if (float_mask & 0x80000000)
+ {
+ if (mips_abi_regsize (gdbarch) == 4
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ /* On a big endian 32 bit ABI, floating point registers
+ are paired to form doubles such that the most
+ significant part is in $f[N+1] and the least
+ significant in $f[N] vis: $f[N+1] ||| $f[N]. The
+ registers are also spilled as a pair and stored as a
+ double.
- warning ("Warning: GDB can't find the start of the function at 0x%s.",
- paddr_nz (pc));
+ When little-endian the least significant part is
+ stored first leading to the memory order $f[N] and
+ then $f[N+1].
- if (!blurb_printed)
- {
- /* This actually happens frequently in embedded
- development, when you first connect to a board
- and your stack pointer and pc are nowhere in
- particular. This message needs to give people
- in that situation enough information to
- determine that it's no big deal. */
- printf_filtered ("\n\
- GDB is unable to find the start of the function at 0x%s\n\
-and thus can't determine the size of that function's stack frame.\n\
-This means that GDB may be unable to access that stack frame, or\n\
-the frames below it.\n\
- This problem is most likely caused by an invalid program counter or\n\
-stack pointer.\n\
- However, if you think GDB should simply search farther back\n\
-from 0x%s for code which looks like the beginning of a\n\
-function, you can increase the range of the search using the `set\n\
-heuristic-fence-post' command.\n",
- paddr_nz (pc), paddr_nz (pc));
- blurb_printed = 1;
- }
- }
+ Unfortunately, when big-endian the most significant
+ part of the double is stored first, and the least
+ significant is stored second. This leads to the
+ registers being ordered in memory as firt $f[N+1] and
+ then $f[N].
+
+ For the big-endian case make certain that the
+ addresses point at the correct (swapped) locations
+ $f[N] and $f[N+1] pair (keep in mind that
+ reg_position is decremented each time through the
+ loop). */
+ if ((ireg & 1))
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position - mips_abi_regsize (gdbarch);
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position + mips_abi_regsize (gdbarch);
+ }
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
- return 0;
- }
- else if (pc_is_mips16 (start_pc))
- {
- unsigned short inst;
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc]
+ = cache->saved_regs[NUM_REGS + RA_REGNUM];
+ }
- /* On MIPS16, any one of the following is likely to be the
- start of a function:
- entry
- addiu sp,-n
- daddiu sp,-n
- extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */
- inst = mips_fetch_instruction (start_pc);
- if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
- || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
- || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
- || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
- break;
- else if ((inst & 0xff00) == 0x6300 /* addiu sp */
- || (inst & 0xff00) == 0xfb00) /* daddiu sp */
- seen_adjsp = 1;
- else
- seen_adjsp = 0;
- }
- else if (mips_about_to_return (start_pc))
- {
- start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
- break;
- }
+ /* SP_REGNUM, contains the value and not the address. */
+ trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
- return start_pc;
+ return (*this_cache);
}
-/* Fetch the immediate value from a MIPS16 instruction.
- If the previous instruction was an EXTEND, use it to extend
- the upper bits of the immediate value. This is a helper function
- for mips16_heuristic_proc_desc. */
+static void
+mips_insn16_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
+ this_cache);
+ (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
+}
-static int
-mips16_get_imm (unsigned short prev_inst, /* previous instruction */
- unsigned short inst, /* current instruction */
- int nbits, /* number of bits in imm field */
- int scale, /* scale factor to be applied to imm */
- int is_signed) /* is the imm field signed? */
+static void
+mips_insn16_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
{
- int offset;
+ struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
+ this_cache);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
- if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */
- {
- offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0);
- if (offset & 0x8000) /* check for negative extend */
- offset = 0 - (0x10000 - (offset & 0xffff));
- return offset | (inst & 0x1f);
- }
- else
- {
- int max_imm = 1 << nbits;
- int mask = max_imm - 1;
- int sign_bit = max_imm >> 1;
+static const struct frame_unwind mips_insn16_frame_unwind =
+{
+ NORMAL_FRAME,
+ mips_insn16_frame_this_id,
+ mips_insn16_frame_prev_register
+};
- offset = inst & mask;
- if (is_signed && (offset & sign_bit))
- offset = 0 - (max_imm - offset);
- return offset * scale;
- }
+static const struct frame_unwind *
+mips_insn16_frame_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ if (pc_is_mips16 (pc))
+ return &mips_insn16_frame_unwind;
+ return NULL;
}
+static CORE_ADDR
+mips_insn16_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
+{
+ struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
+ this_cache);
+ return info->base;
+}
-/* Fill in values in temp_proc_desc based on the MIPS16 instruction
- stream from start_pc to limit_pc. */
+static const struct frame_base mips_insn16_frame_base =
+{
+ &mips_insn16_frame_unwind,
+ mips_insn16_frame_base_address,
+ mips_insn16_frame_base_address,
+ mips_insn16_frame_base_address
+};
-static void
-mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
- struct frame_info *next_frame, CORE_ADDR sp)
+static const struct frame_base *
+mips_insn16_frame_base_sniffer (struct frame_info *next_frame)
{
- CORE_ADDR cur_pc;
- CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */
- unsigned short prev_inst = 0; /* saved copy of previous instruction */
- unsigned inst = 0; /* current instruction */
- unsigned entry_inst = 0; /* the entry instruction */
- int reg, offset;
+ if (mips_insn16_frame_sniffer (next_frame) != NULL)
+ return &mips_insn16_frame_base;
+ else
+ return NULL;
+}
- PROC_FRAME_OFFSET (&temp_proc_desc) = 0; /* size of stack frame */
- PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
+/* Heuristic unwinder for procedures using 32-bit instructions (covers
+ both 32-bit and 64-bit MIPS ISAs). Procedures using 16-bit
+ instructions (a.k.a. MIPS16) are handled by the mips_insn16
+ unwinder. */
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN)
+static struct mips_frame_cache *
+mips_insn32_frame_cache (struct frame_info *next_frame, void **this_cache)
+{
+ mips_extra_func_info_t proc_desc;
+ struct mips_frame_cache *cache;
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ /* r0 bit means kernel trap */
+ int kernel_trap;
+ /* What registers have been saved? Bitmasks. */
+ unsigned long gen_mask, float_mask;
+
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+
+ /* Get the mdebug proc descriptor. */
+ proc_desc = find_proc_desc (frame_pc_unwind (next_frame), next_frame, 1);
+ if (proc_desc == NULL)
+ /* I'm not sure how/whether this can happen. Normally when we
+ can't find a proc_desc, we "synthesize" one using
+ heuristic_proc_desc and set the saved_regs right away. */
+ return cache;
+
+ /* Extract the frame's base. */
+ cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
+ + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
+
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
+ float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
+
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc))
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we
+ better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
{
- /* Save the previous instruction. If it's an EXTEND, we'll extract
- the immediate offset extension from it in mips16_get_imm. */
- prev_inst = inst;
+ /* We need to figure out whether the registers that the
+ proc_desc claims are saved have been saved yet. */
- /* Fetch and decode the instruction. */
- inst = (unsigned short) mips_fetch_instruction (cur_pc);
- if ((inst & 0xff00) == 0x6300 /* addiu sp */
- || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ CORE_ADDR addr;
+
+ /* Bitmasks; set if we have found a save for the register. */
+ unsigned long gen_save_found = 0;
+ unsigned long float_save_found = 0;
+ int mips16;
+
+ /* If the address is odd, assume this is MIPS16 code. */
+ addr = PROC_LOW_ADDR (proc_desc);
+ mips16 = pc_is_mips16 (addr);
+
+ /* Scan through this function's instructions preceding the
+ current PC, and look for those that save registers. */
+ while (addr < frame_pc_unwind (next_frame))
{
- offset = mips16_get_imm (prev_inst, inst, 8, 8, 1);
- if (offset < 0) /* negative stack adjustment? */
- PROC_FRAME_OFFSET (&temp_proc_desc) -= offset;
+ if (mips16)
+ {
+ mips16_decode_reg_save (mips16_fetch_instruction (addr),
+ &gen_save_found);
+ addr += MIPS16_INSTLEN;
+ }
else
- /* Exit loop if a positive stack adjustment is found, which
- usually means that the stack cleanup code in the function
- epilogue is reached. */
- break;
- }
- else if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
- {
- offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
- reg = mips16_to_32_reg[(inst & 0x700) >> 8];
- PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
- set_reg_offset (temp_saved_regs, reg, sp + offset);
- }
- else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
- {
- offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
- reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
- set_reg_offset (temp_saved_regs, reg, sp + offset);
- }
- else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
- {
- offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
- PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
- set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
- }
- else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
- {
- offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
- PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
- set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
- }
- else if (inst == 0x673d) /* move $s1, $sp */
- {
- frame_addr = sp;
- PROC_FRAME_REG (&temp_proc_desc) = 17;
- }
- else if ((inst & 0xff00) == 0x0100) /* addiu $s1,sp,n */
- {
- offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
- frame_addr = sp + offset;
- PROC_FRAME_REG (&temp_proc_desc) = 17;
- PROC_FRAME_ADJUST (&temp_proc_desc) = offset;
- }
- else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */
- {
- offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
- reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
+ {
+ mips32_decode_reg_save (mips32_fetch_instruction (addr),
+ &gen_save_found, &float_save_found);
+ addr += MIPS_INSTLEN;
+ }
}
- else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
+ gen_mask = gen_save_found;
+ float_mask = float_save_found;
+ }
+
+ /* Fill in the offsets for the registers which gen_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ int ireg;
+ for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
+ if (gen_mask & 0x80000000)
{
- offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
- reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
+ cache->saved_regs[NUM_REGS + ireg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
- else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
- entry_inst = inst; /* save for later processing */
- else if ((inst & 0xf800) == 0x1800) /* jal(x) */
- cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */
- }
+ }
- /* The entry instruction is typically the first instruction in a function,
- and it stores registers at offsets relative to the value of the old SP
- (before the prologue). But the value of the sp parameter to this
- function is the new SP (after the prologue has been executed). So we
- can't calculate those offsets until we've seen the entire prologue,
- and can calculate what the old SP must have been. */
- if (entry_inst != 0)
+ /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse
+ order of that normally used by gcc. Therefore, we have to fetch
+ the first instruction of the function, and if it's an entry
+ instruction that saves $s0 or $s1, correct their saved addresses. */
+ if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
{
- int areg_count = (entry_inst >> 8) & 7;
- int sreg_count = (entry_inst >> 6) & 3;
-
- /* The entry instruction always subtracts 32 from the SP. */
- PROC_FRAME_OFFSET (&temp_proc_desc) += 32;
+ ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
+ /* entry */
+ {
+ int reg;
+ int sreg_count = (inst >> 6) & 3;
- /* Now we can calculate what the SP must have been at the
- start of the function prologue. */
- sp += PROC_FRAME_OFFSET (&temp_proc_desc);
+ /* Check if the ra register was pushed on the stack. */
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ if (inst & 0x20)
+ reg_position -= mips_abi_regsize (gdbarch);
- /* Check if a0-a3 were saved in the caller's argument save area. */
- for (reg = 4, offset = 0; reg < areg_count + 4; reg++)
- {
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, sp + offset);
- offset += MIPS_SAVED_REGSIZE;
+ /* Check if the s0 and s1 registers were pushed on the
+ stack. */
+ /* NOTE: cagney/2004-02-08: Huh? This is doing no such
+ check. */
+ for (reg = 16; reg < sreg_count + 16; reg++)
+ {
+ cache->saved_regs[NUM_REGS + reg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
}
+ }
- /* Check if the ra register was pushed on the stack. */
- offset = -4;
- if (entry_inst & 0x20)
+ /* Fill in the offsets for the registers which float_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_FREG_OFFSET (proc_desc));
+ int ireg;
+ /* Fill in the offsets for the float registers which float_mask
+ says were saved. */
+ for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
+ if (float_mask & 0x80000000)
{
- PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM;
- set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
- offset -= MIPS_SAVED_REGSIZE;
- }
+ if (mips_abi_regsize (gdbarch) == 4
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ /* On a big endian 32 bit ABI, floating point registers
+ are paired to form doubles such that the most
+ significant part is in $f[N+1] and the least
+ significant in $f[N] vis: $f[N+1] ||| $f[N]. The
+ registers are also spilled as a pair and stored as a
+ double.
- /* Check if the s0 and s1 registers were pushed on the stack. */
- for (reg = 16; reg < sreg_count + 16; reg++)
- {
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, sp + offset);
- offset -= MIPS_SAVED_REGSIZE;
+ When little-endian the least significant part is
+ stored first leading to the memory order $f[N] and
+ then $f[N+1].
+
+ Unfortunately, when big-endian the most significant
+ part of the double is stored first, and the least
+ significant is stored second. This leads to the
+ registers being ordered in memory as firt $f[N+1] and
+ then $f[N].
+
+ For the big-endian case make certain that the
+ addresses point at the correct (swapped) locations
+ $f[N] and $f[N+1] pair (keep in mind that
+ reg_position is decremented each time through the
+ loop). */
+ if ((ireg & 1))
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position - mips_abi_regsize (gdbarch);
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position + mips_abi_regsize (gdbarch);
+ }
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
- }
+
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc]
+ = cache->saved_regs[NUM_REGS + RA_REGNUM];
+ }
+
+ /* SP_REGNUM, contains the value and not the address. */
+ trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
+
+ return (*this_cache);
}
static void
-mips32_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
- struct frame_info *next_frame, CORE_ADDR sp)
+mips_insn32_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
{
- CORE_ADDR cur_pc;
- CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
-restart:
- temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
- memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
- PROC_FRAME_OFFSET (&temp_proc_desc) = 0;
- PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN)
- {
- unsigned long inst, high_word, low_word;
- int reg;
+ struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
+ this_cache);
+ (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
+}
- /* Fetch the instruction. */
- inst = (unsigned long) mips_fetch_instruction (cur_pc);
+static void
+mips_insn32_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
+ this_cache);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
- /* Save some code by pre-extracting some useful fields. */
- high_word = (inst >> 16) & 0xffff;
- low_word = inst & 0xffff;
- reg = high_word & 0x1f;
+static const struct frame_unwind mips_insn32_frame_unwind =
+{
+ NORMAL_FRAME,
+ mips_insn32_frame_this_id,
+ mips_insn32_frame_prev_register
+};
- if (high_word == 0x27bd /* addiu $sp,$sp,-i */
- || high_word == 0x23bd /* addi $sp,$sp,-i */
- || high_word == 0x67bd) /* daddiu $sp,$sp,-i */
- {
- if (low_word & 0x8000) /* negative stack adjustment? */
- PROC_FRAME_OFFSET (&temp_proc_desc) += 0x10000 - low_word;
- else
- /* Exit loop if a positive stack adjustment is found, which
- usually means that the stack cleanup code in the function
- epilogue is reached. */
- break;
- }
- else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
- {
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, sp + low_word);
- }
- else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
- {
- /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra,
- but the register size used is only 32 bits. Make the address
- for the saved register point to the lower 32 bits. */
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, sp + low_word + 8 - mips_regsize (current_gdbarch));
- }
- else if (high_word == 0x27be) /* addiu $30,$sp,size */
- {
- /* Old gcc frame, r30 is virtual frame pointer. */
- if ((long) low_word != PROC_FRAME_OFFSET (&temp_proc_desc))
- frame_addr = sp + low_word;
- else if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
- {
- unsigned alloca_adjust;
- PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
- alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
- if (alloca_adjust > 0)
- {
- /* FP > SP + frame_size. This may be because
- * of an alloca or somethings similar.
- * Fix sp to "pre-alloca" value, and try again.
- */
- sp += alloca_adjust;
- goto restart;
- }
- }
- }
- /* move $30,$sp. With different versions of gas this will be either
- `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
- Accept any one of these. */
- else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
- {
- /* New gcc frame, virtual frame pointer is at r30 + frame_size. */
- if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
- {
- unsigned alloca_adjust;
- PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
- alloca_adjust = (unsigned) (frame_addr - sp);
- if (alloca_adjust > 0)
- {
- /* FP > SP + frame_size. This may be because
- * of an alloca or somethings similar.
- * Fix sp to "pre-alloca" value, and try again.
- */
- sp += alloca_adjust;
- goto restart;
- }
- }
- }
- else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
- {
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, frame_addr + low_word);
- }
- }
+static const struct frame_unwind *
+mips_insn32_frame_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ if (! pc_is_mips16 (pc))
+ return &mips_insn32_frame_unwind;
+ return NULL;
}
-static mips_extra_func_info_t
-heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
- struct frame_info *next_frame, int cur_frame)
+static CORE_ADDR
+mips_insn32_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
{
- CORE_ADDR sp;
-
- if (cur_frame)
- sp = read_next_frame_reg (next_frame, NUM_REGS + SP_REGNUM);
- else
- sp = 0;
+ struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
+ this_cache);
+ return info->base;
+}
- if (start_pc == 0)
- return NULL;
- memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc));
- temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
- memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
- PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
- PROC_FRAME_REG (&temp_proc_desc) = SP_REGNUM;
- PROC_PC_REG (&temp_proc_desc) = RA_REGNUM;
+static const struct frame_base mips_insn32_frame_base =
+{
+ &mips_insn32_frame_unwind,
+ mips_insn32_frame_base_address,
+ mips_insn32_frame_base_address,
+ mips_insn32_frame_base_address
+};
- if (start_pc + 200 < limit_pc)
- limit_pc = start_pc + 200;
- if (pc_is_mips16 (start_pc))
- mips16_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+static const struct frame_base *
+mips_insn32_frame_base_sniffer (struct frame_info *next_frame)
+{
+ if (mips_insn32_frame_sniffer (next_frame) != NULL)
+ return &mips_insn32_frame_base;
else
- mips32_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
- return &temp_proc_desc;
+ return NULL;
}
-struct mips_objfile_private
+static struct trad_frame_cache *
+mips_stub_frame_cache (struct frame_info *next_frame, void **this_cache)
{
- bfd_size_type size;
- char *contents;
-};
+ CORE_ADDR pc;
+ CORE_ADDR start_addr;
+ CORE_ADDR stack_addr;
+ struct trad_frame_cache *this_trad_cache;
-/* Global used to communicate between non_heuristic_proc_desc and
- compare_pdr_entries within qsort (). */
-static bfd *the_bfd;
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ this_trad_cache = trad_frame_cache_zalloc (next_frame);
+ (*this_cache) = this_trad_cache;
-static int
-compare_pdr_entries (const void *a, const void *b)
+ /* The return address is in the link register. */
+ trad_frame_set_reg_realreg (this_trad_cache, PC_REGNUM, RA_REGNUM);
+
+ /* Frame ID, since it's a frameless / stackless function, no stack
+ space is allocated and SP on entry is the current SP. */
+ pc = frame_pc_unwind (next_frame);
+ find_pc_partial_function (pc, NULL, &start_addr, NULL);
+ stack_addr = frame_unwind_register_signed (next_frame, SP_REGNUM);
+ trad_frame_set_id (this_trad_cache, frame_id_build (start_addr, stack_addr));
+
+ /* Assume that the frame's base is the same as the
+ stack-pointer. */
+ trad_frame_set_this_base (this_trad_cache, stack_addr);
+
+ return this_trad_cache;
+}
+
+static void
+mips_stub_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
{
- CORE_ADDR lhs = bfd_get_32 (the_bfd, (bfd_byte *) a);
- CORE_ADDR rhs = bfd_get_32 (the_bfd, (bfd_byte *) b);
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (next_frame, this_cache);
+ trad_frame_get_id (this_trad_cache, this_id);
+}
- if (lhs < rhs)
- return -1;
- else if (lhs == rhs)
- return 0;
- else
- return 1;
+static void
+mips_stub_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (next_frame, this_cache);
+ trad_frame_get_register (this_trad_cache, next_frame, regnum, optimizedp,
+ lvalp, addrp, realnump, valuep);
}
-static mips_extra_func_info_t
-non_heuristic_proc_desc (CORE_ADDR pc, CORE_ADDR *addrptr)
+static const struct frame_unwind mips_stub_frame_unwind =
{
- CORE_ADDR startaddr;
- mips_extra_func_info_t proc_desc;
- struct block *b = block_for_pc (pc);
- struct symbol *sym;
- struct obj_section *sec;
- struct mips_objfile_private *priv;
+ NORMAL_FRAME,
+ mips_stub_frame_this_id,
+ mips_stub_frame_prev_register
+};
- if (DEPRECATED_PC_IN_CALL_DUMMY (pc, 0, 0))
+static const struct frame_unwind *
+mips_stub_frame_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ if (in_plt_section (pc, NULL))
+ return &mips_stub_frame_unwind;
+ else
return NULL;
+}
- find_pc_partial_function (pc, NULL, &startaddr, NULL);
- if (addrptr)
- *addrptr = startaddr;
+static CORE_ADDR
+mips_stub_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (next_frame, this_cache);
+ return trad_frame_get_this_base (this_trad_cache);
+}
- priv = NULL;
+static const struct frame_base mips_stub_frame_base =
+{
+ &mips_stub_frame_unwind,
+ mips_stub_frame_base_address,
+ mips_stub_frame_base_address,
+ mips_stub_frame_base_address
+};
- sec = find_pc_section (pc);
- if (sec != NULL)
- {
- priv = (struct mips_objfile_private *) sec->objfile->obj_private;
+static const struct frame_base *
+mips_stub_frame_base_sniffer (struct frame_info *next_frame)
+{
+ if (mips_stub_frame_sniffer (next_frame) != NULL)
+ return &mips_stub_frame_base;
+ else
+ return NULL;
+}
- /* Search the ".pdr" section generated by GAS. This includes most of
- the information normally found in ECOFF PDRs. */
+static CORE_ADDR
+read_next_frame_reg (struct frame_info *fi, int regno)
+{
+ /* Always a pseudo. */
+ gdb_assert (regno >= NUM_REGS);
+ if (fi == NULL)
+ {
+ LONGEST val;
+ regcache_cooked_read_signed (current_regcache, regno, &val);
+ return val;
+ }
+ else if ((regno % NUM_REGS) == MIPS_SP_REGNUM)
+ /* MIPS_SP_REGNUM is special, its value is stored in saved_regs.
+ In fact, it is so special that it can even only be fetched
+ using a raw register number! Once this code as been converted
+ to frame-unwind the problem goes away. */
+ return frame_unwind_register_signed (fi, regno % NUM_REGS);
+ else
+ return frame_unwind_register_signed (fi, regno);
- the_bfd = sec->objfile->obfd;
- if (priv == NULL
- && (the_bfd->format == bfd_object
- && bfd_get_flavour (the_bfd) == bfd_target_elf_flavour
- && elf_elfheader (the_bfd)->e_ident[EI_CLASS] == ELFCLASS64))
- {
- /* Right now GAS only outputs the address as a four-byte sequence.
- This means that we should not bother with this method on 64-bit
- targets (until that is fixed). */
+}
- priv = obstack_alloc (& sec->objfile->psymbol_obstack,
- sizeof (struct mips_objfile_private));
- priv->size = 0;
- sec->objfile->obj_private = priv;
- }
- else if (priv == NULL)
- {
- asection *bfdsec;
+/* mips_addr_bits_remove - remove useless address bits */
- priv = obstack_alloc (& sec->objfile->psymbol_obstack,
- sizeof (struct mips_objfile_private));
+static CORE_ADDR
+mips_addr_bits_remove (CORE_ADDR addr)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (mips_mask_address_p (tdep) && (((ULONGEST) addr) >> 32 == 0xffffffffUL))
+ /* This hack is a work-around for existing boards using PMON, the
+ simulator, and any other 64-bit targets that doesn't have true
+ 64-bit addressing. On these targets, the upper 32 bits of
+ addresses are ignored by the hardware. Thus, the PC or SP are
+ likely to have been sign extended to all 1s by instruction
+ sequences that load 32-bit addresses. For example, a typical
+ piece of code that loads an address is this:
- bfdsec = bfd_get_section_by_name (sec->objfile->obfd, ".pdr");
- if (bfdsec != NULL)
- {
- priv->size = bfd_section_size (sec->objfile->obfd, bfdsec);
- priv->contents = obstack_alloc (& sec->objfile->psymbol_obstack,
- priv->size);
- bfd_get_section_contents (sec->objfile->obfd, bfdsec,
- priv->contents, 0, priv->size);
+ lui $r2, <upper 16 bits>
+ ori $r2, <lower 16 bits>
- /* In general, the .pdr section is sorted. However, in the
- presence of multiple code sections (and other corner cases)
- it can become unsorted. Sort it so that we can use a faster
- binary search. */
- qsort (priv->contents, priv->size / 32, 32, compare_pdr_entries);
- }
- else
- priv->size = 0;
+ But the lui sign-extends the value such that the upper 32 bits
+ may be all 1s. The workaround is simply to mask off these
+ bits. In the future, gcc may be changed to support true 64-bit
+ addressing, and this masking will have to be disabled. */
+ return addr &= 0xffffffffUL;
+ else
+ return addr;
+}
- sec->objfile->obj_private = priv;
- }
- the_bfd = NULL;
+/* mips_software_single_step() is called just before we want to resume
+ the inferior, if we want to single-step it but there is no hardware
+ or kernel single-step support (MIPS on GNU/Linux for example). We find
+ the target of the coming instruction and breakpoint it.
- if (priv->size != 0)
- {
- int low, mid, high;
- char *ptr;
+ single_step is also called just after the inferior stops. If we had
+ set up a simulated single-step, we undo our damage. */
- low = 0;
- high = priv->size / 32;
+void
+mips_software_single_step (enum target_signal sig, int insert_breakpoints_p)
+{
+ static CORE_ADDR next_pc;
+ typedef char binsn_quantum[BREAKPOINT_MAX];
+ static binsn_quantum break_mem;
+ CORE_ADDR pc;
- do
- {
- CORE_ADDR pdr_pc;
+ if (insert_breakpoints_p)
+ {
+ pc = read_register (mips_regnum (current_gdbarch)->pc);
+ next_pc = mips_next_pc (pc);
- mid = (low + high) / 2;
+ target_insert_breakpoint (next_pc, break_mem);
+ }
+ else
+ target_remove_breakpoint (next_pc, break_mem);
+}
- ptr = priv->contents + mid * 32;
- pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
- pdr_pc += ANOFFSET (sec->objfile->section_offsets,
- SECT_OFF_TEXT (sec->objfile));
- if (pdr_pc == startaddr)
- break;
- if (pdr_pc > startaddr)
- high = mid;
- else
- low = mid + 1;
- }
- while (low != high);
+static struct mips_extra_func_info temp_proc_desc;
- if (low != high)
- {
- struct symbol *sym = find_pc_function (pc);
+/* This hack will go away once the get_prev_frame() code has been
+ modified to set the frame's type first. That is BEFORE init extra
+ frame info et.al. is called. This is because it will become
+ possible to skip the init extra info call for sigtramp and dummy
+ frames. */
+static CORE_ADDR *temp_saved_regs;
- /* Fill in what we need of the proc_desc. */
- proc_desc = (mips_extra_func_info_t)
- obstack_alloc (&sec->objfile->psymbol_obstack,
- sizeof (struct mips_extra_func_info));
- PROC_LOW_ADDR (proc_desc) = startaddr;
+/* Set a register's saved stack address in temp_saved_regs. If an
+ address has already been set for this register, do nothing; this
+ way we will only recognize the first save of a given register in a
+ function prologue.
- /* Only used for dummy frames. */
- PROC_HIGH_ADDR (proc_desc) = 0;
+ For simplicity, save the address in both [0 .. NUM_REGS) and
+ [NUM_REGS .. 2*NUM_REGS). Strictly speaking, only the second range
+ is used as it is only second range (the ABI instead of ISA
+ registers) that comes into play when finding saved registers in a
+ frame. */
- PROC_FRAME_OFFSET (proc_desc)
- = bfd_get_32 (sec->objfile->obfd, ptr + 20);
- PROC_FRAME_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 24);
- PROC_FRAME_ADJUST (proc_desc) = 0;
- PROC_REG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 4);
- PROC_FREG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 12);
- PROC_REG_OFFSET (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 8);
- PROC_FREG_OFFSET (proc_desc)
- = bfd_get_32 (sec->objfile->obfd, ptr + 16);
- PROC_PC_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 28);
- proc_desc->pdr.isym = (long) sym;
-
- return proc_desc;
- }
- }
- }
-
- if (b == NULL)
- return NULL;
-
- if (startaddr > BLOCK_START (b))
+static void
+set_reg_offset (CORE_ADDR *saved_regs, int regno, CORE_ADDR offset)
+{
+ if (saved_regs[regno] == 0)
{
- /* This is the "pathological" case referred to in a comment in
- print_frame_info. It might be better to move this check into
- symbol reading. */
- return NULL;
+ saved_regs[regno + 0 * NUM_REGS] = offset;
+ saved_regs[regno + 1 * NUM_REGS] = offset;
}
+}
- sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_DOMAIN, 0, NULL);
- /* If we never found a PDR for this function in symbol reading, then
- examine prologues to find the information. */
- if (sym)
- {
- proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym);
- if (PROC_FRAME_REG (proc_desc) == -1)
- return NULL;
- else
- return proc_desc;
- }
+/* Test whether the PC points to the return instruction at the
+ end of a function. */
+
+static int
+mips_about_to_return (CORE_ADDR pc)
+{
+ if (pc_is_mips16 (pc))
+ /* This mips16 case isn't necessarily reliable. Sometimes the compiler
+ generates a "jr $ra"; other times it generates code to load
+ the return address from the stack to an accessible register (such
+ as $a3), then a "jr" using that register. This second case
+ is almost impossible to distinguish from an indirect jump
+ used for switch statements, so we don't even try. */
+ return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */
else
- return NULL;
+ return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */
}
-static mips_extra_func_info_t
-find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame)
+/* This fencepost looks highly suspicious to me. Removing it also
+ seems suspicious as it could affect remote debugging across serial
+ lines. */
+
+static CORE_ADDR
+heuristic_proc_start (CORE_ADDR pc)
{
- mips_extra_func_info_t proc_desc;
- CORE_ADDR startaddr = 0;
+ CORE_ADDR start_pc;
+ CORE_ADDR fence;
+ int instlen;
+ int seen_adjsp = 0;
- proc_desc = non_heuristic_proc_desc (pc, &startaddr);
+ pc = ADDR_BITS_REMOVE (pc);
+ start_pc = pc;
+ fence = start_pc - heuristic_fence_post;
+ if (start_pc == 0)
+ return 0;
- if (proc_desc)
- {
- /* IF this is the topmost frame AND
- * (this proc does not have debugging information OR
- * the PC is in the procedure prologue)
- * THEN create a "heuristic" proc_desc (by analyzing
- * the actual code) to replace the "official" proc_desc.
- */
- if (next_frame == NULL)
- {
- struct symtab_and_line val;
- struct symbol *proc_symbol =
- PROC_DESC_IS_DUMMY (proc_desc) ? 0 : PROC_SYMBOL (proc_desc);
+ if (heuristic_fence_post == UINT_MAX || fence < VM_MIN_ADDRESS)
+ fence = VM_MIN_ADDRESS;
- if (proc_symbol)
- {
- val = find_pc_line (BLOCK_START
- (SYMBOL_BLOCK_VALUE (proc_symbol)),
- 0);
- val.pc = val.end ? val.end : pc;
- }
- if (!proc_symbol || pc < val.pc)
- {
- mips_extra_func_info_t found_heuristic =
- heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
- pc, next_frame, cur_frame);
- if (found_heuristic)
- proc_desc = found_heuristic;
- }
- }
- }
- else
- {
- /* Is linked_proc_desc_table really necessary? It only seems to be used
- by procedure call dummys. However, the procedures being called ought
- to have their own proc_descs, and even if they don't,
- heuristic_proc_desc knows how to create them! */
+ instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
- struct linked_proc_info *link;
+ /* search back for previous return */
+ for (start_pc -= instlen;; start_pc -= instlen)
+ if (start_pc < fence)
+ {
+ /* It's not clear to me why we reach this point when
+ stop_soon, but with this test, at least we
+ don't print out warnings for every child forked (eg, on
+ decstation). 22apr93 rich@cygnus.com. */
+ if (stop_soon == NO_STOP_QUIETLY)
+ {
+ static int blurb_printed = 0;
- for (link = linked_proc_desc_table; link; link = link->next)
- if (PROC_LOW_ADDR (&link->info) <= pc
- && PROC_HIGH_ADDR (&link->info) > pc)
- return &link->info;
+ warning ("GDB can't find the start of the function at 0x%s.",
+ paddr_nz (pc));
- if (startaddr == 0)
- startaddr = heuristic_proc_start (pc);
+ if (!blurb_printed)
+ {
+ /* This actually happens frequently in embedded
+ development, when you first connect to a board
+ and your stack pointer and pc are nowhere in
+ particular. This message needs to give people
+ in that situation enough information to
+ determine that it's no big deal. */
+ printf_filtered ("\n\
+ GDB is unable to find the start of the function at 0x%s\n\
+and thus can't determine the size of that function's stack frame.\n\
+This means that GDB may be unable to access that stack frame, or\n\
+the frames below it.\n\
+ This problem is most likely caused by an invalid program counter or\n\
+stack pointer.\n\
+ However, if you think GDB should simply search farther back\n\
+from 0x%s for code which looks like the beginning of a\n\
+function, you can increase the range of the search using the `set\n\
+heuristic-fence-post' command.\n", paddr_nz (pc), paddr_nz (pc));
+ blurb_printed = 1;
+ }
+ }
- proc_desc =
- heuristic_proc_desc (startaddr, pc, next_frame, cur_frame);
- }
- return proc_desc;
-}
+ return 0;
+ }
+ else if (pc_is_mips16 (start_pc))
+ {
+ unsigned short inst;
-static CORE_ADDR
-get_frame_pointer (struct frame_info *frame,
- mips_extra_func_info_t proc_desc)
-{
- return (read_next_frame_reg (frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
- + PROC_FRAME_OFFSET (proc_desc)
- - PROC_FRAME_ADJUST (proc_desc));
+ /* On MIPS16, any one of the following is likely to be the
+ start of a function:
+ entry
+ addiu sp,-n
+ daddiu sp,-n
+ extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */
+ inst = mips_fetch_instruction (start_pc);
+ if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
+ || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
+ || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
+ break;
+ else if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ seen_adjsp = 1;
+ else
+ seen_adjsp = 0;
+ }
+ else if (mips_about_to_return (start_pc))
+ {
+ start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
+ break;
+ }
+
+ return start_pc;
}
-static mips_extra_func_info_t cached_proc_desc;
+/* Fetch the immediate value from a MIPS16 instruction.
+ If the previous instruction was an EXTEND, use it to extend
+ the upper bits of the immediate value. This is a helper function
+ for mips16_heuristic_proc_desc. */
-static CORE_ADDR
-mips_frame_chain (struct frame_info *frame)
+static int
+mips16_get_imm (unsigned short prev_inst, /* previous instruction */
+ unsigned short inst, /* current instruction */
+ int nbits, /* number of bits in imm field */
+ int scale, /* scale factor to be applied to imm */
+ int is_signed) /* is the imm field signed? */
{
- mips_extra_func_info_t proc_desc;
- CORE_ADDR tmp;
- CORE_ADDR saved_pc = DEPRECATED_FRAME_SAVED_PC (frame);
-
- if (saved_pc == 0 || deprecated_inside_entry_file (saved_pc))
- return 0;
-
- /* Check if the PC is inside a call stub. If it is, fetch the
- PC of the caller of that stub. */
- if ((tmp = SKIP_TRAMPOLINE_CODE (saved_pc)) != 0)
- saved_pc = tmp;
+ int offset;
- if (DEPRECATED_PC_IN_CALL_DUMMY (saved_pc, 0, 0))
+ if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */
{
- /* A dummy frame, uses SP not FP. Get the old SP value. If all
- is well, frame->frame the bottom of the current frame will
- contain that value. */
- return get_frame_base (frame);
+ offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0);
+ if (offset & 0x8000) /* check for negative extend */
+ offset = 0 - (0x10000 - (offset & 0xffff));
+ return offset | (inst & 0x1f);
}
-
- /* Look up the procedure descriptor for this PC. */
- proc_desc = find_proc_desc (saved_pc, frame, 1);
- if (!proc_desc)
- return 0;
-
- cached_proc_desc = proc_desc;
-
- /* If no frame pointer and frame size is zero, we must be at end
- of stack (or otherwise hosed). If we don't check frame size,
- we loop forever if we see a zero size frame. */
- if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
- && PROC_FRAME_OFFSET (proc_desc) == 0
- /* The previous frame from a sigtramp frame might be frameless
- and have frame size zero. */
- && !(get_frame_type (frame) == SIGTRAMP_FRAME)
- /* For a generic dummy frame, let get_frame_pointer() unwind a
- register value saved as part of the dummy frame call. */
- && !(DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0)))
- return 0;
else
- return get_frame_pointer (frame, proc_desc);
+ {
+ int max_imm = 1 << nbits;
+ int mask = max_imm - 1;
+ int sign_bit = max_imm >> 1;
+
+ offset = inst & mask;
+ if (is_signed && (offset & sign_bit))
+ offset = 0 - (max_imm - offset);
+ return offset * scale;
+ }
}
+
+/* Fill in values in temp_proc_desc based on the MIPS16 instruction
+ stream from start_pc to limit_pc. */
+
static void
-mips_init_extra_frame_info (int fromleaf, struct frame_info *fci)
+mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *next_frame, CORE_ADDR sp)
{
- int regnum;
- mips_extra_func_info_t proc_desc;
+ CORE_ADDR cur_pc;
+ CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */
+ unsigned short prev_inst = 0; /* saved copy of previous instruction */
+ unsigned inst = 0; /* current instruction */
+ unsigned entry_inst = 0; /* the entry instruction */
+ int reg, offset;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- if (get_frame_type (fci) == DUMMY_FRAME)
- return;
+ PROC_FRAME_OFFSET (&temp_proc_desc) = 0; /* size of stack frame */
+ PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
- /* Use proc_desc calculated in frame_chain. When there is no
- next frame, i.e, get_next_frame (fci) == NULL, we call
- find_proc_desc () to calculate it, passing an explicit
- NULL as the frame parameter. */
- proc_desc =
- get_next_frame (fci)
- ? cached_proc_desc
- : find_proc_desc (get_frame_pc (fci),
- NULL /* i.e, get_next_frame (fci) */,
- 1);
-
- frame_extra_info_zalloc (fci, sizeof (struct frame_extra_info));
-
- deprecated_set_frame_saved_regs_hack (fci, NULL);
- get_frame_extra_info (fci)->proc_desc =
- proc_desc == &temp_proc_desc ? 0 : proc_desc;
- if (proc_desc)
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN)
{
- /* Fixup frame-pointer - only needed for top frame */
- /* This may not be quite right, if proc has a real frame register.
- Get the value of the frame relative sp, procedure might have been
- interrupted by a signal at it's very start. */
- if (get_frame_pc (fci) == PROC_LOW_ADDR (proc_desc)
- && !PROC_DESC_IS_DUMMY (proc_desc))
- deprecated_update_frame_base_hack (fci, read_next_frame_reg (get_next_frame (fci), NUM_REGS + SP_REGNUM));
- else if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (fci), 0, 0))
- /* Do not ``fix'' fci->frame. It will have the value of the
- generic dummy frame's top-of-stack (since the draft
- fci->frame is obtained by returning the unwound stack
- pointer) and that is what we want. That way the fci->frame
- value will match the top-of-stack value that was saved as
- part of the dummy frames data. */
- /* Do nothing. */;
- else
- deprecated_update_frame_base_hack (fci, get_frame_pointer (get_next_frame (fci), proc_desc));
-
- if (proc_desc == &temp_proc_desc)
- {
- char *name;
-
- /* Do not set the saved registers for a sigtramp frame,
- mips_find_saved_registers will do that for us. We can't
- use (get_frame_type (fci) == SIGTRAMP_FRAME), it is not
- yet set. */
- /* FIXME: cagney/2002-11-18: This problem will go away once
- frame.c:get_prev_frame() is modified to set the frame's
- type before calling functions like this. */
- find_pc_partial_function (get_frame_pc (fci), &name,
- (CORE_ADDR *) NULL, (CORE_ADDR *) NULL);
- if (!PC_IN_SIGTRAMP (get_frame_pc (fci), name))
- {
- frame_saved_regs_zalloc (fci);
- /* Set value of previous frame's stack pointer.
- Remember that saved_regs[SP_REGNUM] is special in
- that it contains the value of the stack pointer
- register. The other saved_regs values are addresses
- (in the inferior) at which a given register's value
- may be found. */
- set_reg_offset (temp_saved_regs, SP_REGNUM,
- get_frame_base (fci));
- set_reg_offset (temp_saved_regs, PC_REGNUM,
- temp_saved_regs[RA_REGNUM]);
- memcpy (deprecated_get_frame_saved_regs (fci), temp_saved_regs,
- SIZEOF_FRAME_SAVED_REGS);
- }
- }
+ /* Save the previous instruction. If it's an EXTEND, we'll extract
+ the immediate offset extension from it in mips16_get_imm. */
+ prev_inst = inst;
- /* hack: if argument regs are saved, guess these contain args */
- /* assume we can't tell how many args for now */
- get_frame_extra_info (fci)->num_args = -1;
- for (regnum = MIPS_LAST_ARG_REGNUM; regnum >= A0_REGNUM; regnum--)
+ /* Fetch and decode the instruction. */
+ inst = (unsigned short) mips_fetch_instruction (cur_pc);
+ if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
{
- if (PROC_REG_MASK (proc_desc) & (1 << regnum))
- {
- get_frame_extra_info (fci)->num_args = regnum - A0_REGNUM + 1;
- break;
- }
+ offset = mips16_get_imm (prev_inst, inst, 8, 8, 1);
+ if (offset < 0) /* negative stack adjustment? */
+ PROC_FRAME_OFFSET (&temp_proc_desc) -= offset;
+ else
+ /* Exit loop if a positive stack adjustment is found, which
+ usually means that the stack cleanup code in the function
+ epilogue is reached. */
+ break;
+ }
+ else if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ reg = mips16_to_32_reg[(inst & 0x700) >> 8];
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
+ }
+ else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
+ }
+ else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
+ }
+ else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
+ }
+ else if (inst == 0x673d) /* move $s1, $sp */
+ {
+ frame_addr = sp;
+ PROC_FRAME_REG (&temp_proc_desc) = 17;
+ }
+ else if ((inst & 0xff00) == 0x0100) /* addiu $s1,sp,n */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ frame_addr = sp + offset;
+ PROC_FRAME_REG (&temp_proc_desc) = 17;
+ PROC_FRAME_ADJUST (&temp_proc_desc) = offset;
+ }
+ else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
}
+ else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
+ }
+ else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ entry_inst = inst; /* save for later processing */
+ else if ((inst & 0xf800) == 0x1800) /* jal(x) */
+ cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */
}
-}
-
-/* MIPS stack frames are almost impenetrable. When execution stops,
- we basically have to look at symbol information for the function
- that we stopped in, which tells us *which* register (if any) is
- the base of the frame pointer, and what offset from that register
- the frame itself is at.
-
- This presents a problem when trying to examine a stack in memory
- (that isn't executing at the moment), using the "frame" command. We
- don't have a PC, nor do we have any registers except SP.
-
- This routine takes two arguments, SP and PC, and tries to make the
- cached frames look as if these two arguments defined a frame on the
- cache. This allows the rest of info frame to extract the important
- arguments without difficulty. */
-
-struct frame_info *
-setup_arbitrary_frame (int argc, CORE_ADDR *argv)
-{
- if (argc != 2)
- error ("MIPS frame specifications require two arguments: sp and pc");
-
- return create_new_frame (argv[0], argv[1]);
-}
-/* According to the current ABI, should the type be passed in a
- floating-point register (assuming that there is space)? When there
- is no FPU, FP are not even considered as possibile candidates for
- FP registers and, consequently this returns false - forces FP
- arguments into integer registers. */
+ /* The entry instruction is typically the first instruction in a function,
+ and it stores registers at offsets relative to the value of the old SP
+ (before the prologue). But the value of the sp parameter to this
+ function is the new SP (after the prologue has been executed). So we
+ can't calculate those offsets until we've seen the entire prologue,
+ and can calculate what the old SP must have been. */
+ if (entry_inst != 0)
+ {
+ int areg_count = (entry_inst >> 8) & 7;
+ int sreg_count = (entry_inst >> 6) & 3;
-static int
-fp_register_arg_p (enum type_code typecode, struct type *arg_type)
-{
- return ((typecode == TYPE_CODE_FLT
- || (MIPS_EABI
- && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
- && TYPE_NFIELDS (arg_type) == 1
- && TYPE_CODE (TYPE_FIELD_TYPE (arg_type, 0)) == TYPE_CODE_FLT))
- && MIPS_FPU_TYPE != MIPS_FPU_NONE);
-}
+ /* The entry instruction always subtracts 32 from the SP. */
+ PROC_FRAME_OFFSET (&temp_proc_desc) += 32;
-/* On o32, argument passing in GPRs depends on the alignment of the type being
- passed. Return 1 if this type must be aligned to a doubleword boundary. */
+ /* Now we can calculate what the SP must have been at the
+ start of the function prologue. */
+ sp += PROC_FRAME_OFFSET (&temp_proc_desc);
-static int
-mips_type_needs_double_align (struct type *type)
-{
- enum type_code typecode = TYPE_CODE (type);
+ /* Check if a0-a3 were saved in the caller's argument save area. */
+ for (reg = 4, offset = 0; reg < areg_count + 4; reg++)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
+ offset += mips_abi_regsize (current_gdbarch);
+ }
- if (typecode == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8)
- return 1;
- else if (typecode == TYPE_CODE_STRUCT)
- {
- if (TYPE_NFIELDS (type) < 1)
- return 0;
- return mips_type_needs_double_align (TYPE_FIELD_TYPE (type, 0));
- }
- else if (typecode == TYPE_CODE_UNION)
- {
- int i, n;
+ /* Check if the ra register was pushed on the stack. */
+ offset = -4;
+ if (entry_inst & 0x20)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM;
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
+ offset -= mips_abi_regsize (current_gdbarch);
+ }
- n = TYPE_NFIELDS (type);
- for (i = 0; i < n; i++)
- if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i)))
- return 1;
- return 0;
+ /* Check if the s0 and s1 registers were pushed on the stack. */
+ for (reg = 16; reg < sreg_count + 16; reg++)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
+ offset -= mips_abi_regsize (current_gdbarch);
+ }
}
- return 0;
-}
-
-/* Adjust the address downward (direction of stack growth) so that it
- is correctly aligned for a new stack frame. */
-static CORE_ADDR
-mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
-{
- return align_down (addr, 16);
}
-static CORE_ADDR
-mips_eabi_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
- struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
- struct value **args, CORE_ADDR sp, int struct_return,
- CORE_ADDR struct_addr)
+static void
+mips32_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *next_frame, CORE_ADDR sp)
{
- int argreg;
- int float_argreg;
- int argnum;
- int len = 0;
- int stack_offset = 0;
-
- /* For shared libraries, "t9" needs to point at the function
- address. */
- regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
-
- /* Set the return address register to point to the entry point of
- the program, where a breakpoint lies in wait. */
- regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
-
- /* First ensure that the stack and structure return address (if any)
- are properly aligned. The stack has to be at least 64-bit
- aligned even on 32-bit machines, because doubles must be 64-bit
- aligned. For n32 and n64, stack frames need to be 128-bit
- aligned, so we round to this widest known alignment. */
-
- sp = align_down (sp, 16);
- struct_addr = align_down (struct_addr, 16);
-
- /* Now make space on the stack for the args. We allocate more
- than necessary for EABI, because the first few arguments are
- passed in registers, but that's OK. */
- for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- MIPS_STACK_ARGSIZE);
- sp -= align_up (len, 16);
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_dummy_call: sp=0x%s allocated %ld\n",
- paddr_nz (sp), (long) align_up (len, 16));
-
- /* Initialize the integer and float register pointers. */
- argreg = A0_REGNUM;
- float_argreg = mips_fpa0_regnum (current_gdbarch);
-
- /* The struct_return pointer occupies the first parameter-passing reg. */
- if (struct_return)
+ CORE_ADDR cur_pc;
+ CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
+restart:
+ temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
+ memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
+ PROC_FRAME_OFFSET (&temp_proc_desc) = 0;
+ PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN)
{
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_dummy_call: struct_return reg=%d 0x%s\n",
- argreg, paddr_nz (struct_addr));
- write_register (argreg++, struct_addr);
- }
+ unsigned long inst, high_word, low_word;
+ int reg;
- /* Now load as many as possible of the first arguments into
- registers, and push the rest onto the stack. Loop thru args
- from first to last. */
- for (argnum = 0; argnum < nargs; argnum++)
- {
- char *val;
- char valbuf[MAX_REGISTER_SIZE];
- struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
- int len = TYPE_LENGTH (arg_type);
- enum type_code typecode = TYPE_CODE (arg_type);
+ /* Fetch the instruction. */
+ inst = (unsigned long) mips_fetch_instruction (cur_pc);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_eabi_push_dummy_call: %d len=%d type=%d",
- argnum + 1, len, (int) typecode);
+ /* Save some code by pre-extracting some useful fields. */
+ high_word = (inst >> 16) & 0xffff;
+ low_word = inst & 0xffff;
+ reg = high_word & 0x1f;
- /* The EABI passes structures that do not fit in a register by
- reference. */
- if (len > MIPS_SAVED_REGSIZE
- && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
- {
- store_unsigned_integer (valbuf, MIPS_SAVED_REGSIZE, VALUE_ADDRESS (arg));
- typecode = TYPE_CODE_PTR;
- len = MIPS_SAVED_REGSIZE;
- val = valbuf;
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " push");
+ if (high_word == 0x27bd /* addiu $sp,$sp,-i */
+ || high_word == 0x23bd /* addi $sp,$sp,-i */
+ || high_word == 0x67bd) /* daddiu $sp,$sp,-i */
+ {
+ if (low_word & 0x8000) /* negative stack adjustment? */
+ PROC_FRAME_OFFSET (&temp_proc_desc) += 0x10000 - low_word;
+ else
+ /* Exit loop if a positive stack adjustment is found, which
+ usually means that the stack cleanup code in the function
+ epilogue is reached. */
+ break;
}
- else
- val = (char *) VALUE_CONTENTS (arg);
-
- /* 32-bit ABIs always start floating point arguments in an
- even-numbered floating point register. Round the FP register
- up before the check to see if there are any FP registers
- left. Non MIPS_EABI targets also pass the FP in the integer
- registers so also round up normal registers. */
- if (!FP_REGISTER_DOUBLE
- && fp_register_arg_p (typecode, arg_type))
+ else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
{
- if ((float_argreg & 1))
- float_argreg++;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, sp + low_word);
}
-
- /* Floating point arguments passed in registers have to be
- treated specially. On 32-bit architectures, doubles
- are passed in register pairs; the even register gets
- the low word, and the odd register gets the high word.
- On non-EABI processors, the first two floating point arguments are
- also copied to general registers, because MIPS16 functions
- don't use float registers for arguments. This duplication of
- arguments in general registers can't hurt non-MIPS16 functions
- because those registers are normally skipped. */
- /* MIPS_EABI squeezes a struct that contains a single floating
- point value into an FP register instead of pushing it onto the
- stack. */
- if (fp_register_arg_p (typecode, arg_type)
- && float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
+ else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
{
- if (!FP_REGISTER_DOUBLE && len == 8)
- {
- int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
- unsigned long regval;
-
- /* Write the low word of the double to the even register(s). */
- regval = extract_unsigned_integer (val + low_offset, 4);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, 4));
- write_register (float_argreg++, regval);
-
- /* Write the high word of the double to the odd register(s). */
- regval = extract_unsigned_integer (val + 4 - low_offset, 4);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, 4));
- write_register (float_argreg++, regval);
- }
- else
- {
- /* This is a floating point value that fits entirely
- in a single register. */
- /* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
- LONGEST regval = extract_unsigned_integer (val, len);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, len));
- write_register (float_argreg++, regval);
- }
+ /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and
+ $ra. */
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, sp + low_word);
}
- else
+ else if (high_word == 0x27be) /* addiu $30,$sp,size */
{
- /* Copy the argument to general registers or the stack in
- register-sized pieces. Large arguments are split between
- registers and stack. */
- /* Note: structs whose size is not a multiple of
- mips_regsize() are treated specially: Irix cc passes them
- in registers where gcc sometimes puts them on the stack.
- For maximum compatibility, we will put them in both
- places. */
- int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
- (len % MIPS_SAVED_REGSIZE != 0));
-
- /* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
- while (len > 0)
+ /* Old gcc frame, r30 is virtual frame pointer. */
+ if ((long) low_word != PROC_FRAME_OFFSET (&temp_proc_desc))
+ frame_addr = sp + low_word;
+ else if (PROC_FRAME_REG (&temp_proc_desc) == MIPS_SP_REGNUM)
{
- /* Remember if the argument was written to the stack. */
- int stack_used_p = 0;
- int partial_len =
- len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
- partial_len);
-
- /* Write this portion of the argument to the stack. */
- if (argreg > MIPS_LAST_ARG_REGNUM
- || odd_sized_struct
- || fp_register_arg_p (typecode, arg_type))
+ unsigned alloca_adjust;
+ PROC_FRAME_REG (&temp_proc_desc) = 30;
+ frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
+ alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
+ if (alloca_adjust > 0)
{
- /* Should shorter than int integer values be
- promoted to int before being stored? */
- int longword_offset = 0;
- CORE_ADDR addr;
- stack_used_p = 1;
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- {
- if (MIPS_STACK_ARGSIZE == 8 &&
- (typecode == TYPE_CODE_INT ||
- typecode == TYPE_CODE_PTR ||
- typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = MIPS_STACK_ARGSIZE - len;
- else if ((typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION) &&
- TYPE_LENGTH (arg_type) < MIPS_STACK_ARGSIZE)
- longword_offset = MIPS_STACK_ARGSIZE - len;
- }
-
- if (mips_debug)
- {
- fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s",
- paddr_nz (stack_offset));
- fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s",
- paddr_nz (longword_offset));
- }
-
- addr = sp + stack_offset + longword_offset;
-
- if (mips_debug)
- {
- int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
- paddr_nz (addr));
- for (i = 0; i < partial_len; i++)
- {
- fprintf_unfiltered (gdb_stdlog, "%02x",
- val[i] & 0xff);
- }
- }
- write_memory (addr, val, partial_len);
+ /* FP > SP + frame_size. This may be because
+ * of an alloca or somethings similar.
+ * Fix sp to "pre-alloca" value, and try again.
+ */
+ sp += alloca_adjust;
+ goto restart;
}
-
- /* Note!!! This is NOT an else clause. Odd sized
- structs may go thru BOTH paths. Floating point
- arguments will not. */
- /* Write this portion of the argument to a general
- purpose register. */
- if (argreg <= MIPS_LAST_ARG_REGNUM
- && !fp_register_arg_p (typecode, arg_type))
+ }
+ }
+ /* move $30,$sp. With different versions of gas this will be either
+ `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
+ Accept any one of these. */
+ else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+ {
+ /* New gcc frame, virtual frame pointer is at r30 + frame_size. */
+ if (PROC_FRAME_REG (&temp_proc_desc) == MIPS_SP_REGNUM)
+ {
+ unsigned alloca_adjust;
+ PROC_FRAME_REG (&temp_proc_desc) = 30;
+ frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
+ alloca_adjust = (unsigned) (frame_addr - sp);
+ if (alloca_adjust > 0)
{
- LONGEST regval = extract_unsigned_integer (val, partial_len);
-
- if (mips_debug)
- fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
- argreg,
- phex (regval, MIPS_SAVED_REGSIZE));
- write_register (argreg, regval);
- argreg++;
+ /* FP > SP + frame_size. This may be because
+ * of an alloca or somethings similar.
+ * Fix sp to "pre-alloca" value, and try again.
+ */
+ sp += alloca_adjust;
+ goto restart;
}
-
- len -= partial_len;
- val += partial_len;
-
- /* Compute the the offset into the stack at which we
- will copy the next parameter.
-
- In the new EABI (and the NABI32), the stack_offset
- only needs to be adjusted when it has been used. */
-
- if (stack_used_p)
- stack_offset += align_up (partial_len, MIPS_STACK_ARGSIZE);
}
}
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, "\n");
+ else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, frame_addr + low_word);
+ }
}
-
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
-
- /* Return adjusted stack pointer. */
- return sp;
}
-/* N32/N64 version of push_dummy_call. */
-
-static CORE_ADDR
-mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
- struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
- struct value **args, CORE_ADDR sp, int struct_return,
- CORE_ADDR struct_addr)
+static mips_extra_func_info_t
+heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *next_frame, int cur_frame)
{
- int argreg;
- int float_argreg;
- int argnum;
- int len = 0;
- int stack_offset = 0;
+ CORE_ADDR sp;
- /* For shared libraries, "t9" needs to point at the function
- address. */
- regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
+ if (cur_frame)
+ sp = read_next_frame_reg (next_frame, NUM_REGS + MIPS_SP_REGNUM);
+ else
+ sp = 0;
- /* Set the return address register to point to the entry point of
- the program, where a breakpoint lies in wait. */
- regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
+ if (start_pc == 0)
+ return NULL;
+ memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc));
+ temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
+ memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
+ PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
+ PROC_FRAME_REG (&temp_proc_desc) = MIPS_SP_REGNUM;
+ PROC_PC_REG (&temp_proc_desc) = RA_REGNUM;
- /* First ensure that the stack and structure return address (if any)
- are properly aligned. The stack has to be at least 64-bit
- aligned even on 32-bit machines, because doubles must be 64-bit
- aligned. For n32 and n64, stack frames need to be 128-bit
- aligned, so we round to this widest known alignment. */
+ if (start_pc + 200 < limit_pc)
+ limit_pc = start_pc + 200;
+ if (pc_is_mips16 (start_pc))
+ mips16_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+ else
+ mips32_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+ return &temp_proc_desc;
+}
- sp = align_down (sp, 16);
- struct_addr = align_down (struct_addr, 16);
+struct mips_objfile_private
+{
+ bfd_size_type size;
+ char *contents;
+};
- /* Now make space on the stack for the args. */
- for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- MIPS_STACK_ARGSIZE);
- sp -= align_up (len, 16);
+/* Global used to communicate between non_heuristic_proc_desc and
+ compare_pdr_entries within qsort (). */
+static bfd *the_bfd;
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_dummy_call: sp=0x%s allocated %ld\n",
- paddr_nz (sp), (long) align_up (len, 16));
+static int
+compare_pdr_entries (const void *a, const void *b)
+{
+ CORE_ADDR lhs = bfd_get_32 (the_bfd, (bfd_byte *) a);
+ CORE_ADDR rhs = bfd_get_32 (the_bfd, (bfd_byte *) b);
- /* Initialize the integer and float register pointers. */
- argreg = A0_REGNUM;
- float_argreg = mips_fpa0_regnum (current_gdbarch);
+ if (lhs < rhs)
+ return -1;
+ else if (lhs == rhs)
+ return 0;
+ else
+ return 1;
+}
- /* The struct_return pointer occupies the first parameter-passing reg. */
- if (struct_return)
- {
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_dummy_call: struct_return reg=%d 0x%s\n",
- argreg, paddr_nz (struct_addr));
- write_register (argreg++, struct_addr);
- }
+static mips_extra_func_info_t
+non_heuristic_proc_desc (CORE_ADDR pc, CORE_ADDR *addrptr)
+{
+ CORE_ADDR startaddr;
+ mips_extra_func_info_t proc_desc;
+ struct block *b = block_for_pc (pc);
+ struct symbol *sym;
+ struct obj_section *sec;
+ struct mips_objfile_private *priv;
- /* Now load as many as possible of the first arguments into
- registers, and push the rest onto the stack. Loop thru args
- from first to last. */
- for (argnum = 0; argnum < nargs; argnum++)
- {
- char *val;
- char valbuf[MAX_REGISTER_SIZE];
- struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
- int len = TYPE_LENGTH (arg_type);
- enum type_code typecode = TYPE_CODE (arg_type);
+ find_pc_partial_function (pc, NULL, &startaddr, NULL);
+ if (addrptr)
+ *addrptr = startaddr;
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_n32n64_push_dummy_call: %d len=%d type=%d",
- argnum + 1, len, (int) typecode);
+ priv = NULL;
- val = (char *) VALUE_CONTENTS (arg);
+ sec = find_pc_section (pc);
+ if (sec != NULL)
+ {
+ priv = (struct mips_objfile_private *) objfile_data (sec->objfile, mips_pdr_data);
- if (fp_register_arg_p (typecode, arg_type)
- && float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
+ /* Search the ".pdr" section generated by GAS. This includes most of
+ the information normally found in ECOFF PDRs. */
+
+ the_bfd = sec->objfile->obfd;
+ if (priv == NULL
+ && (the_bfd->format == bfd_object
+ && bfd_get_flavour (the_bfd) == bfd_target_elf_flavour
+ && elf_elfheader (the_bfd)->e_ident[EI_CLASS] == ELFCLASS64))
{
- /* This is a floating point value that fits entirely
- in a single register. */
- /* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
- LONGEST regval = extract_unsigned_integer (val, len);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, len));
- write_register (float_argreg++, regval);
+ /* Right now GAS only outputs the address as a four-byte sequence.
+ This means that we should not bother with this method on 64-bit
+ targets (until that is fixed). */
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, len));
- write_register (argreg, regval);
- argreg += 1;
+ priv = obstack_alloc (&sec->objfile->objfile_obstack,
+ sizeof (struct mips_objfile_private));
+ priv->size = 0;
+ set_objfile_data (sec->objfile, mips_pdr_data, priv);
}
- else
+ else if (priv == NULL)
{
- /* Copy the argument to general registers or the stack in
- register-sized pieces. Large arguments are split between
- registers and stack. */
- /* Note: structs whose size is not a multiple of
- mips_regsize() are treated specially: Irix cc passes them
- in registers where gcc sometimes puts them on the stack.
- For maximum compatibility, we will put them in both
- places. */
- int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
- (len % MIPS_SAVED_REGSIZE != 0));
- /* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
- while (len > 0)
+ asection *bfdsec;
+
+ priv = obstack_alloc (&sec->objfile->objfile_obstack,
+ sizeof (struct mips_objfile_private));
+
+ bfdsec = bfd_get_section_by_name (sec->objfile->obfd, ".pdr");
+ if (bfdsec != NULL)
{
- /* Rememer if the argument was written to the stack. */
- int stack_used_p = 0;
- int partial_len = len < MIPS_SAVED_REGSIZE ?
- len : MIPS_SAVED_REGSIZE;
+ priv->size = bfd_section_size (sec->objfile->obfd, bfdsec);
+ priv->contents = obstack_alloc (&sec->objfile->objfile_obstack,
+ priv->size);
+ bfd_get_section_contents (sec->objfile->obfd, bfdsec,
+ priv->contents, 0, priv->size);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
- partial_len);
+ /* In general, the .pdr section is sorted. However, in the
+ presence of multiple code sections (and other corner cases)
+ it can become unsorted. Sort it so that we can use a faster
+ binary search. */
+ qsort (priv->contents, priv->size / 32, 32,
+ compare_pdr_entries);
+ }
+ else
+ priv->size = 0;
- /* Write this portion of the argument to the stack. */
- if (argreg > MIPS_LAST_ARG_REGNUM
- || odd_sized_struct
- || fp_register_arg_p (typecode, arg_type))
- {
- /* Should shorter than int integer values be
- promoted to int before being stored? */
- int longword_offset = 0;
- CORE_ADDR addr;
- stack_used_p = 1;
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- {
- if (MIPS_STACK_ARGSIZE == 8 &&
- (typecode == TYPE_CODE_INT ||
- typecode == TYPE_CODE_PTR ||
- typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = MIPS_STACK_ARGSIZE - len;
- }
+ set_objfile_data (sec->objfile, mips_pdr_data, priv);
+ }
+ the_bfd = NULL;
- if (mips_debug)
- {
- fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s",
- paddr_nz (stack_offset));
- fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s",
- paddr_nz (longword_offset));
- }
+ if (priv->size != 0)
+ {
+ int low, mid, high;
+ char *ptr;
+ CORE_ADDR pdr_pc;
- addr = sp + stack_offset + longword_offset;
+ low = 0;
+ high = priv->size / 32;
- if (mips_debug)
- {
- int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
- paddr_nz (addr));
- for (i = 0; i < partial_len; i++)
- {
- fprintf_unfiltered (gdb_stdlog, "%02x",
- val[i] & 0xff);
- }
- }
- write_memory (addr, val, partial_len);
- }
+ /* We've found a .pdr section describing this objfile. We want to
+ find the entry which describes this code address. The .pdr
+ information is not very descriptive; we have only a function
+ start address. We have to look for the closest entry, because
+ the local symbol at the beginning of this function may have
+ been stripped - so if we ask the symbol table for the start
+ address we may get a preceding global function. */
- /* Note!!! This is NOT an else clause. Odd sized
- structs may go thru BOTH paths. Floating point
- arguments will not. */
- /* Write this portion of the argument to a general
- purpose register. */
- if (argreg <= MIPS_LAST_ARG_REGNUM
- && !fp_register_arg_p (typecode, arg_type))
- {
- LONGEST regval = extract_unsigned_integer (val, partial_len);
+ /* First, find the last .pdr entry starting at or before PC. */
+ do
+ {
+ mid = (low + high) / 2;
- /* A non-floating-point argument being passed in a
- general register. If a struct or union, and if
- the remaining length is smaller than the register
- size, we have to adjust the register value on
- big endian targets.
+ ptr = priv->contents + mid * 32;
+ pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
+ pdr_pc += ANOFFSET (sec->objfile->section_offsets,
+ SECT_OFF_TEXT (sec->objfile));
- It does not seem to be necessary to do the
- same for integral types.
+ if (pdr_pc > pc)
+ high = mid;
+ else
+ low = mid + 1;
+ }
+ while (low != high);
- cagney/2001-07-23: gdb/179: Also, GCC, when
- outputting LE O32 with sizeof (struct) <
- MIPS_SAVED_REGSIZE, generates a left shift as
- part of storing the argument in a register a
- register (the left shift isn't generated when
- sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
- is quite possible that this is GCC contradicting
- the LE/O32 ABI, GDB has not been adjusted to
- accommodate this. Either someone needs to
- demonstrate that the LE/O32 ABI specifies such a
- left shift OR this new ABI gets identified as
- such and GDB gets tweaked accordingly. */
+ /* Both low and high point one past the PDR of interest. If
+ both are zero, that means this PC is before any region
+ covered by a PDR, i.e. pdr_pc for the first PDR entry is
+ greater than PC. */
+ if (low > 0)
+ {
+ ptr = priv->contents + (low - 1) * 32;
+ pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
+ pdr_pc += ANOFFSET (sec->objfile->section_offsets,
+ SECT_OFF_TEXT (sec->objfile));
+ }
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && partial_len < MIPS_SAVED_REGSIZE
- && (typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
- TARGET_CHAR_BIT);
+ /* We don't have a range, so we have no way to know for sure
+ whether we're in the correct PDR or a PDR for a preceding
+ function and the current function was a stripped local
+ symbol. But if the PDR's PC is at least as great as the
+ best guess from the symbol table, assume that it does cover
+ the right area; if a .pdr section is present at all then
+ nearly every function will have an entry. The biggest exception
+ will be the dynamic linker stubs; conveniently these are
+ placed before .text instead of after. */
+
+ if (pc >= pdr_pc && pdr_pc >= startaddr)
+ {
+ struct symbol *sym = find_pc_function (pc);
- if (mips_debug)
- fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
- argreg,
- phex (regval, MIPS_SAVED_REGSIZE));
- write_register (argreg, regval);
- argreg++;
- }
+ if (addrptr)
+ *addrptr = pdr_pc;
- len -= partial_len;
- val += partial_len;
+ /* Fill in what we need of the proc_desc. */
+ proc_desc = (mips_extra_func_info_t)
+ obstack_alloc (&sec->objfile->objfile_obstack,
+ sizeof (struct mips_extra_func_info));
+ PROC_LOW_ADDR (proc_desc) = pdr_pc;
- /* Compute the the offset into the stack at which we
- will copy the next parameter.
+ /* Only used for dummy frames. */
+ PROC_HIGH_ADDR (proc_desc) = 0;
- In N32 (N64?), the stack_offset only needs to be
- adjusted when it has been used. */
+ PROC_FRAME_OFFSET (proc_desc)
+ = bfd_get_32 (sec->objfile->obfd, ptr + 20);
+ PROC_FRAME_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 24);
+ PROC_FRAME_ADJUST (proc_desc) = 0;
+ PROC_REG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 4);
+ PROC_FREG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 12);
+ PROC_REG_OFFSET (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 8);
+ PROC_FREG_OFFSET (proc_desc)
+ = bfd_get_32 (sec->objfile->obfd, ptr + 16);
+ PROC_PC_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 28);
+ proc_desc->pdr.isym = (long) sym;
- if (stack_used_p)
- stack_offset += align_up (partial_len, MIPS_STACK_ARGSIZE);
+ return proc_desc;
}
}
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, "\n");
}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+ if (b == NULL)
+ return NULL;
- /* Return adjusted stack pointer. */
- return sp;
+ if (startaddr > BLOCK_START (b))
+ {
+ /* This is the "pathological" case referred to in a comment in
+ print_frame_info. It might be better to move this check into
+ symbol reading. */
+ return NULL;
+ }
+
+ sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_DOMAIN, 0, NULL);
+
+ /* If we never found a PDR for this function in symbol reading, then
+ examine prologues to find the information. */
+ if (sym)
+ {
+ proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym);
+ if (PROC_FRAME_REG (proc_desc) == -1)
+ return NULL;
+ else
+ return proc_desc;
+ }
+ else
+ return NULL;
}
-/* O32 version of push_dummy_call. */
-static CORE_ADDR
-mips_o32_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
- struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
- struct value **args, CORE_ADDR sp, int struct_return,
- CORE_ADDR struct_addr)
+static mips_extra_func_info_t
+find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame)
{
- int argreg;
- int float_argreg;
- int argnum;
- int len = 0;
- int stack_offset = 0;
+ mips_extra_func_info_t proc_desc;
+ CORE_ADDR startaddr = 0;
- /* For shared libraries, "t9" needs to point at the function
- address. */
- regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
-
- /* Set the return address register to point to the entry point of
- the program, where a breakpoint lies in wait. */
- regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
-
- /* First ensure that the stack and structure return address (if any)
- are properly aligned. The stack has to be at least 64-bit
- aligned even on 32-bit machines, because doubles must be 64-bit
- aligned. For n32 and n64, stack frames need to be 128-bit
- aligned, so we round to this widest known alignment. */
-
- sp = align_down (sp, 16);
- struct_addr = align_down (struct_addr, 16);
-
- /* Now make space on the stack for the args. */
- for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- MIPS_STACK_ARGSIZE);
- sp -= align_up (len, 16);
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_dummy_call: sp=0x%s allocated %ld\n",
- paddr_nz (sp), (long) align_up (len, 16));
-
- /* Initialize the integer and float register pointers. */
- argreg = A0_REGNUM;
- float_argreg = mips_fpa0_regnum (current_gdbarch);
-
- /* The struct_return pointer occupies the first parameter-passing reg. */
- if (struct_return)
- {
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_dummy_call: struct_return reg=%d 0x%s\n",
- argreg, paddr_nz (struct_addr));
- write_register (argreg++, struct_addr);
- stack_offset += MIPS_STACK_ARGSIZE;
- }
+ proc_desc = non_heuristic_proc_desc (pc, &startaddr);
- /* Now load as many as possible of the first arguments into
- registers, and push the rest onto the stack. Loop thru args
- from first to last. */
- for (argnum = 0; argnum < nargs; argnum++)
+ if (proc_desc)
{
- char *val;
- char valbuf[MAX_REGISTER_SIZE];
- struct value *arg = args[argnum];
- struct type *arg_type = check_typedef (VALUE_TYPE (arg));
- int len = TYPE_LENGTH (arg_type);
- enum type_code typecode = TYPE_CODE (arg_type);
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o32_push_dummy_call: %d len=%d type=%d",
- argnum + 1, len, (int) typecode);
-
- val = (char *) VALUE_CONTENTS (arg);
-
- /* 32-bit ABIs always start floating point arguments in an
- even-numbered floating point register. Round the FP register
- up before the check to see if there are any FP registers
- left. O32/O64 targets also pass the FP in the integer
- registers so also round up normal registers. */
- if (!FP_REGISTER_DOUBLE
- && fp_register_arg_p (typecode, arg_type))
+ /* IF this is the topmost frame AND
+ * (this proc does not have debugging information OR
+ * the PC is in the procedure prologue)
+ * THEN create a "heuristic" proc_desc (by analyzing
+ * the actual code) to replace the "official" proc_desc.
+ */
+ if (next_frame == NULL)
{
- if ((float_argreg & 1))
- float_argreg++;
- }
-
- /* Floating point arguments passed in registers have to be
- treated specially. On 32-bit architectures, doubles
- are passed in register pairs; the even register gets
- the low word, and the odd register gets the high word.
- On O32/O64, the first two floating point arguments are
- also copied to general registers, because MIPS16 functions
- don't use float registers for arguments. This duplication of
- arguments in general registers can't hurt non-MIPS16 functions
- because those registers are normally skipped. */
+ struct symtab_and_line val;
+ struct symbol *proc_symbol =
+ PROC_DESC_IS_DUMMY (proc_desc) ? 0 : PROC_SYMBOL (proc_desc);
- if (fp_register_arg_p (typecode, arg_type)
- && float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
- {
- if (!FP_REGISTER_DOUBLE && len == 8)
+ if (proc_symbol)
{
- int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
- unsigned long regval;
-
- /* Write the low word of the double to the even register(s). */
- regval = extract_unsigned_integer (val + low_offset, 4);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, 4));
- write_register (float_argreg++, regval);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, 4));
- write_register (argreg++, regval);
-
- /* Write the high word of the double to the odd register(s). */
- regval = extract_unsigned_integer (val + 4 - low_offset, 4);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, 4));
- write_register (float_argreg++, regval);
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, 4));
- write_register (argreg++, regval);
+ val = find_pc_line (BLOCK_START
+ (SYMBOL_BLOCK_VALUE (proc_symbol)), 0);
+ val.pc = val.end ? val.end : pc;
}
- else
+ if (!proc_symbol || pc < val.pc)
{
- /* This is a floating point value that fits entirely
- in a single register. */
- /* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
- LONGEST regval = extract_unsigned_integer (val, len);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
- float_argreg, phex (regval, len));
- write_register (float_argreg++, regval);
- /* CAGNEY: 32 bit MIPS ABI's always reserve two FP
- registers for each argument. The below is (my
- guess) to ensure that the corresponding integer
- register has reserved the same space. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, len));
- write_register (argreg, regval);
- argreg += FP_REGISTER_DOUBLE ? 1 : 2;
+ mips_extra_func_info_t found_heuristic =
+ heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
+ pc, next_frame, cur_frame);
+ if (found_heuristic)
+ proc_desc = found_heuristic;
}
- /* Reserve space for the FP register. */
- stack_offset += align_up (len, MIPS_STACK_ARGSIZE);
}
- else
- {
- /* Copy the argument to general registers or the stack in
- register-sized pieces. Large arguments are split between
- registers and stack. */
- /* Note: structs whose size is not a multiple of
- mips_regsize() are treated specially: Irix cc passes them
- in registers where gcc sometimes puts them on the stack.
- For maximum compatibility, we will put them in both
- places. */
- int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
- (len % MIPS_SAVED_REGSIZE != 0));
- /* Structures should be aligned to eight bytes (even arg registers)
- on MIPS_ABI_O32, if their first member has double precision. */
- if (MIPS_SAVED_REGSIZE < 8
- && mips_type_needs_double_align (arg_type))
- {
- if ((argreg & 1))
- argreg++;
- }
- /* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
- while (len > 0)
- {
- /* Remember if the argument was written to the stack. */
- int stack_used_p = 0;
- int partial_len =
- len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
+ }
+ else
+ {
+ /* Is linked_proc_desc_table really necessary? It only seems to be used
+ by procedure call dummys. However, the procedures being called ought
+ to have their own proc_descs, and even if they don't,
+ heuristic_proc_desc knows how to create them! */
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
- partial_len);
+ struct linked_proc_info *link;
- /* Write this portion of the argument to the stack. */
- if (argreg > MIPS_LAST_ARG_REGNUM
- || odd_sized_struct
- || fp_register_arg_p (typecode, arg_type))
- {
- /* Should shorter than int integer values be
- promoted to int before being stored? */
- int longword_offset = 0;
- CORE_ADDR addr;
- stack_used_p = 1;
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- {
- if (MIPS_STACK_ARGSIZE == 8 &&
- (typecode == TYPE_CODE_INT ||
- typecode == TYPE_CODE_PTR ||
- typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = MIPS_STACK_ARGSIZE - len;
- }
+ for (link = linked_proc_desc_table; link; link = link->next)
+ if (PROC_LOW_ADDR (&link->info) <= pc
+ && PROC_HIGH_ADDR (&link->info) > pc)
+ return &link->info;
- if (mips_debug)
- {
- fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s",
- paddr_nz (stack_offset));
- fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s",
- paddr_nz (longword_offset));
- }
+ if (startaddr == 0)
+ startaddr = heuristic_proc_start (pc);
- addr = sp + stack_offset + longword_offset;
+ proc_desc = heuristic_proc_desc (startaddr, pc, next_frame, cur_frame);
+ }
+ return proc_desc;
+}
- if (mips_debug)
- {
- int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
- paddr_nz (addr));
- for (i = 0; i < partial_len; i++)
- {
- fprintf_unfiltered (gdb_stdlog, "%02x",
- val[i] & 0xff);
- }
- }
- write_memory (addr, val, partial_len);
- }
+/* MIPS stack frames are almost impenetrable. When execution stops,
+ we basically have to look at symbol information for the function
+ that we stopped in, which tells us *which* register (if any) is
+ the base of the frame pointer, and what offset from that register
+ the frame itself is at.
- /* Note!!! This is NOT an else clause. Odd sized
- structs may go thru BOTH paths. Floating point
- arguments will not. */
- /* Write this portion of the argument to a general
- purpose register. */
- if (argreg <= MIPS_LAST_ARG_REGNUM
- && !fp_register_arg_p (typecode, arg_type))
- {
- LONGEST regval = extract_signed_integer (val, partial_len);
- /* Value may need to be sign extended, because
- mips_regsize() != MIPS_SAVED_REGSIZE. */
+ This presents a problem when trying to examine a stack in memory
+ (that isn't executing at the moment), using the "frame" command. We
+ don't have a PC, nor do we have any registers except SP.
- /* A non-floating-point argument being passed in a
- general register. If a struct or union, and if
- the remaining length is smaller than the register
- size, we have to adjust the register value on
- big endian targets.
+ This routine takes two arguments, SP and PC, and tries to make the
+ cached frames look as if these two arguments defined a frame on the
+ cache. This allows the rest of info frame to extract the important
+ arguments without difficulty. */
- It does not seem to be necessary to do the
- same for integral types.
+struct frame_info *
+setup_arbitrary_frame (int argc, CORE_ADDR *argv)
+{
+ if (argc != 2)
+ error ("MIPS frame specifications require two arguments: sp and pc");
- Also don't do this adjustment on O64 binaries.
+ return create_new_frame (argv[0], argv[1]);
+}
- cagney/2001-07-23: gdb/179: Also, GCC, when
- outputting LE O32 with sizeof (struct) <
- MIPS_SAVED_REGSIZE, generates a left shift as
- part of storing the argument in a register a
- register (the left shift isn't generated when
- sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
- is quite possible that this is GCC contradicting
- the LE/O32 ABI, GDB has not been adjusted to
- accommodate this. Either someone needs to
- demonstrate that the LE/O32 ABI specifies such a
- left shift OR this new ABI gets identified as
- such and GDB gets tweaked accordingly. */
-
- if (MIPS_SAVED_REGSIZE < 8
- && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && partial_len < MIPS_SAVED_REGSIZE
- && (typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
- TARGET_CHAR_BIT);
+/* According to the current ABI, should the type be passed in a
+ floating-point register (assuming that there is space)? When there
+ is no FPU, FP are not even considered as possibile candidates for
+ FP registers and, consequently this returns false - forces FP
+ arguments into integer registers. */
- if (mips_debug)
- fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
- argreg,
- phex (regval, MIPS_SAVED_REGSIZE));
- write_register (argreg, regval);
- argreg++;
+static int
+fp_register_arg_p (enum type_code typecode, struct type *arg_type)
+{
+ return ((typecode == TYPE_CODE_FLT
+ || (MIPS_EABI
+ && (typecode == TYPE_CODE_STRUCT
+ || typecode == TYPE_CODE_UNION)
+ && TYPE_NFIELDS (arg_type) == 1
+ && TYPE_CODE (TYPE_FIELD_TYPE (arg_type, 0)) == TYPE_CODE_FLT))
+ && MIPS_FPU_TYPE != MIPS_FPU_NONE);
+}
- /* Prevent subsequent floating point arguments from
- being passed in floating point registers. */
- float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
- }
+/* On o32, argument passing in GPRs depends on the alignment of the type being
+ passed. Return 1 if this type must be aligned to a doubleword boundary. */
- len -= partial_len;
- val += partial_len;
+static int
+mips_type_needs_double_align (struct type *type)
+{
+ enum type_code typecode = TYPE_CODE (type);
- /* Compute the the offset into the stack at which we
- will copy the next parameter.
+ if (typecode == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8)
+ return 1;
+ else if (typecode == TYPE_CODE_STRUCT)
+ {
+ if (TYPE_NFIELDS (type) < 1)
+ return 0;
+ return mips_type_needs_double_align (TYPE_FIELD_TYPE (type, 0));
+ }
+ else if (typecode == TYPE_CODE_UNION)
+ {
+ int i, n;
+
+ n = TYPE_NFIELDS (type);
+ for (i = 0; i < n; i++)
+ if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i)))
+ return 1;
+ return 0;
+ }
+ return 0;
+}
+
+/* Adjust the address downward (direction of stack growth) so that it
+ is correctly aligned for a new stack frame. */
+static CORE_ADDR
+mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ return align_down (addr, 16);
+}
+
+/* Determine how a return value is stored within the MIPS register
+ file, given the return type `valtype'. */
+
+struct return_value_word
+{
+ int len;
+ int reg;
+ int reg_offset;
+ int buf_offset;
+};
- In older ABIs, the caller reserved space for
- registers that contained arguments. This was loosely
- refered to as their "home". Consequently, space is
- always allocated. */
+static void
+return_value_location (struct type *valtype,
+ struct return_value_word *hi,
+ struct return_value_word *lo)
+{
+ int len = TYPE_LENGTH (valtype);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- stack_offset += align_up (partial_len, MIPS_STACK_ARGSIZE);
+ if (TYPE_CODE (valtype) == TYPE_CODE_FLT
+ && ((MIPS_FPU_TYPE == MIPS_FPU_DOUBLE && (len == 4 || len == 8))
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE && len == 4)))
+ {
+ if (mips_abi_regsize (current_gdbarch) < 8 && len == 8)
+ {
+ /* We need to break a 64bit float in two 32 bit halves and
+ spread them across a floating-point register pair. */
+ lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
+ hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4;
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->
+ fp0) == 8) ? 4 : 0);
+ hi->reg_offset = lo->reg_offset;
+ lo->reg = mips_regnum (current_gdbarch)->fp0 + 0;
+ hi->reg = mips_regnum (current_gdbarch)->fp0 + 1;
+ lo->len = 4;
+ hi->len = 4;
+ }
+ else
+ {
+ /* The floating point value fits in a single floating-point
+ register. */
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->
+ fp0) == 8
+ && len == 4) ? 4 : 0);
+ lo->reg = mips_regnum (current_gdbarch)->fp0;
+ lo->len = len;
+ lo->buf_offset = 0;
+ hi->len = 0;
+ hi->reg_offset = 0;
+ hi->buf_offset = 0;
+ hi->reg = 0;
+ }
+ }
+ else
+ {
+ /* Locate a result possibly spread across two registers. */
+ int regnum = 2;
+ lo->reg = regnum + 0;
+ hi->reg = regnum + 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && len < mips_abi_regsize (current_gdbarch))
+ {
+ /* "un-left-justify" the value in the low register */
+ lo->reg_offset = mips_abi_regsize (current_gdbarch) - len;
+ lo->len = len;
+ hi->reg_offset = 0;
+ hi->len = 0;
+ }
+ else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG && len > mips_abi_regsize (current_gdbarch) /* odd-size structs */
+ && len < mips_abi_regsize (current_gdbarch) * 2
+ && (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+ TYPE_CODE (valtype) == TYPE_CODE_UNION))
+ {
+ /* "un-left-justify" the value spread across two registers. */
+ lo->reg_offset = 2 * mips_abi_regsize (current_gdbarch) - len;
+ lo->len = mips_abi_regsize (current_gdbarch) - lo->reg_offset;
+ hi->reg_offset = 0;
+ hi->len = len - lo->len;
+ }
+ else
+ {
+ /* Only perform a partial copy of the second register. */
+ lo->reg_offset = 0;
+ hi->reg_offset = 0;
+ if (len > mips_abi_regsize (current_gdbarch))
+ {
+ lo->len = mips_abi_regsize (current_gdbarch);
+ hi->len = len - mips_abi_regsize (current_gdbarch);
+ }
+ else
+ {
+ lo->len = len;
+ hi->len = 0;
}
}
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, "\n");
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && register_size (current_gdbarch, regnum) == 8
+ && mips_abi_regsize (current_gdbarch) == 4)
+ {
+ /* Account for the fact that only the least-signficant part
+ of the register is being used */
+ lo->reg_offset += 4;
+ hi->reg_offset += 4;
+ }
+ lo->buf_offset = 0;
+ hi->buf_offset = lo->len;
}
+}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+/* Should call_function allocate stack space for a struct return? */
- /* Return adjusted stack pointer. */
- return sp;
+static int
+mips_eabi_use_struct_convention (int gcc_p, struct type *type)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ return (TYPE_LENGTH (type) > 2 * mips_abi_regsize (current_gdbarch));
}
-/* O64 version of push_dummy_call. */
+/* Should call_function pass struct by reference?
+ For each architecture, structs are passed either by
+ value or by reference, depending on their size. */
+
+static int
+mips_eabi_reg_struct_has_addr (int gcc_p, struct type *type)
+{
+ enum type_code typecode = TYPE_CODE (check_typedef (type));
+ int len = TYPE_LENGTH (check_typedef (type));
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ if (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
+ return (len > mips_abi_regsize (current_gdbarch));
+
+ return 0;
+}
static CORE_ADDR
-mips_o64_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
- struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
- struct value **args, CORE_ADDR sp, int struct_return,
- CORE_ADDR struct_addr)
+mips_eabi_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int argnum;
int len = 0;
int stack_offset = 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ CORE_ADDR func_addr = find_function_addr (function, NULL);
/* For shared libraries, "t9" needs to point at the function
address. */
sp = align_down (sp, 16);
struct_addr = align_down (struct_addr, 16);
- /* Now make space on the stack for the args. */
+ /* Now make space on the stack for the args. We allocate more
+ than necessary for EABI, because the first few arguments are
+ passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- MIPS_STACK_ARGSIZE);
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_dummy_call: sp=0x%s allocated %ld\n",
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_eabi_push_dummy_call: sp=0x%s allocated %ld\n",
paddr_nz (sp), (long) align_up (len, 16));
/* Initialize the integer and float register pointers. */
{
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_dummy_call: struct_return reg=%d 0x%s\n",
+ "mips_eabi_push_dummy_call: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
- stack_offset += MIPS_STACK_ARGSIZE;
}
/* Now load as many as possible of the first arguments into
if (mips_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_o64_push_dummy_call: %d len=%d type=%d",
+ "mips_eabi_push_dummy_call: %d len=%d type=%d",
argnum + 1, len, (int) typecode);
- val = (char *) VALUE_CONTENTS (arg);
+ /* The EABI passes structures that do not fit in a register by
+ reference. */
+ if (len > mips_abi_regsize (gdbarch)
+ && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
+ {
+ store_unsigned_integer (valbuf, mips_abi_regsize (gdbarch),
+ VALUE_ADDRESS (arg));
+ typecode = TYPE_CODE_PTR;
+ len = mips_abi_regsize (gdbarch);
+ val = valbuf;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " push");
+ }
+ else
+ val = (char *) VALUE_CONTENTS (arg);
/* 32-bit ABIs always start floating point arguments in an
even-numbered floating point register. Round the FP register
up before the check to see if there are any FP registers
- left. O32/O64 targets also pass the FP in the integer
+ left. Non MIPS_EABI targets also pass the FP in the integer
registers so also round up normal registers. */
- if (!FP_REGISTER_DOUBLE
+ if (mips_abi_regsize (gdbarch) < 8
&& fp_register_arg_p (typecode, arg_type))
{
if ((float_argreg & 1))
treated specially. On 32-bit architectures, doubles
are passed in register pairs; the even register gets
the low word, and the odd register gets the high word.
- On O32/O64, the first two floating point arguments are
+ On non-EABI processors, the first two floating point arguments are
also copied to general registers, because MIPS16 functions
don't use float registers for arguments. This duplication of
arguments in general registers can't hurt non-MIPS16 functions
because those registers are normally skipped. */
-
+ /* MIPS_EABI squeezes a struct that contains a single floating
+ point value into an FP register instead of pushing it onto the
+ stack. */
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
- if (!FP_REGISTER_DOUBLE && len == 8)
+ if (mips_abi_regsize (gdbarch) < 8 && len == 8)
{
int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
unsigned long regval;
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, 4));
write_register (float_argreg++, regval);
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, 4));
- write_register (argreg++, regval);
/* Write the high word of the double to the odd register(s). */
regval = extract_unsigned_integer (val + 4 - low_offset, 4);
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, 4));
write_register (float_argreg++, regval);
-
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, 4));
- write_register (argreg++, regval);
}
else
{
/* This is a floating point value that fits entirely
in a single register. */
/* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
+ above to ensure that it is even register aligned. */
LONGEST regval = extract_unsigned_integer (val, len);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, len));
write_register (float_argreg++, regval);
- /* CAGNEY: 32 bit MIPS ABI's always reserve two FP
- registers for each argument. The below is (my
- guess) to ensure that the corresponding integer
- register has reserved the same space. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
- argreg, phex (regval, len));
- write_register (argreg, regval);
- argreg += FP_REGISTER_DOUBLE ? 1 : 2;
}
- /* Reserve space for the FP register. */
- stack_offset += align_up (len, MIPS_STACK_ARGSIZE);
}
else
{
register-sized pieces. Large arguments are split between
registers and stack. */
/* Note: structs whose size is not a multiple of
- mips_regsize() are treated specially: Irix cc passes them
- in registers where gcc sometimes puts them on the stack.
- For maximum compatibility, we will put them in both
- places. */
- int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
- (len % MIPS_SAVED_REGSIZE != 0));
- /* Structures should be aligned to eight bytes (even arg registers)
- on MIPS_ABI_O32, if their first member has double precision. */
- if (MIPS_SAVED_REGSIZE < 8
- && mips_type_needs_double_align (arg_type))
- {
- if ((argreg & 1))
- argreg++;
- }
+ mips_abi_regsize() are treated specially: Irix cc passes
+ them in registers where gcc sometimes puts them on the
+ stack. For maximum compatibility, we will put them in
+ both places. */
+ int odd_sized_struct = ((len > mips_abi_regsize (gdbarch))
+ && (len % mips_abi_regsize (gdbarch) != 0));
+
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len =
- len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
+ int partial_len = (len < mips_abi_regsize (gdbarch)
+ ? len : mips_abi_regsize (gdbarch));
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
stack_used_p = 1;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- if (MIPS_STACK_ARGSIZE == 8 &&
- (typecode == TYPE_CODE_INT ||
- typecode == TYPE_CODE_PTR ||
- typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = MIPS_STACK_ARGSIZE - len;
+ if (mips_stack_argsize (gdbarch) == 8
+ && (typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (gdbarch) - len;
+ else if ((typecode == TYPE_CODE_STRUCT
+ || typecode == TYPE_CODE_UNION)
+ && (TYPE_LENGTH (arg_type)
+ < mips_stack_argsize (gdbarch)))
+ longword_offset = mips_stack_argsize (gdbarch) - len;
}
if (mips_debug)
if (mips_debug)
{
int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
paddr_nz (addr));
for (i = 0; i < partial_len; i++)
{
- fprintf_unfiltered (gdb_stdlog, "%02x",
+ fprintf_unfiltered (gdb_stdlog, "%02x",
val[i] & 0xff);
}
}
structs may go thru BOTH paths. Floating point
arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
- LONGEST regval = extract_signed_integer (val, partial_len);
- /* Value may need to be sign extended, because
- mips_regsize() != MIPS_SAVED_REGSIZE. */
-
- /* A non-floating-point argument being passed in a
- general register. If a struct or union, and if
- the remaining length is smaller than the register
- size, we have to adjust the register value on
- big endian targets.
-
- It does not seem to be necessary to do the
- same for integral types.
-
- Also don't do this adjustment on O64 binaries.
-
- cagney/2001-07-23: gdb/179: Also, GCC, when
- outputting LE O32 with sizeof (struct) <
- MIPS_SAVED_REGSIZE, generates a left shift as
- part of storing the argument in a register a
- register (the left shift isn't generated when
- sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
- is quite possible that this is GCC contradicting
- the LE/O32 ABI, GDB has not been adjusted to
- accommodate this. Either someone needs to
- demonstrate that the LE/O32 ABI specifies such a
- left shift OR this new ABI gets identified as
- such and GDB gets tweaked accordingly. */
-
- if (MIPS_SAVED_REGSIZE < 8
- && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && partial_len < MIPS_SAVED_REGSIZE
- && (typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
- TARGET_CHAR_BIT);
+ LONGEST regval =
+ extract_unsigned_integer (val, partial_len);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, MIPS_SAVED_REGSIZE));
+ phex (regval,
+ mips_abi_regsize (gdbarch)));
write_register (argreg, regval);
argreg++;
-
- /* Prevent subsequent floating point arguments from
- being passed in floating point registers. */
- float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
}
len -= partial_len;
val += partial_len;
/* Compute the the offset into the stack at which we
- will copy the next parameter.
+ will copy the next parameter.
- In older ABIs, the caller reserved space for
- registers that contained arguments. This was loosely
- refered to as their "home". Consequently, space is
- always allocated. */
+ In the new EABI (and the NABI32), the stack_offset
+ only needs to be adjusted when it has been used. */
- stack_offset += align_up (partial_len, MIPS_STACK_ARGSIZE);
+ if (stack_used_p)
+ stack_offset += align_up (partial_len,
+ mips_stack_argsize (gdbarch));
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
/* Return adjusted stack pointer. */
return sp;
}
+/* Given a return value in `regbuf' with a type `valtype', extract and
+ copy its value into `valbuf'. */
+
static void
-mips_pop_frame (void)
+mips_eabi_extract_return_value (struct type *valtype,
+ char regbuf[], char *valbuf)
{
- int regnum;
- struct frame_info *frame = get_current_frame ();
- CORE_ADDR new_sp = get_frame_base (frame);
- mips_extra_func_info_t proc_desc;
-
- if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0))
- {
- generic_pop_dummy_frame ();
- flush_cached_frames ();
- return;
- }
-
- proc_desc = get_frame_extra_info (frame)->proc_desc;
- write_register (PC_REGNUM, DEPRECATED_FRAME_SAVED_PC (frame));
- mips_find_saved_regs (frame);
- for (regnum = 0; regnum < NUM_REGS; regnum++)
- if (regnum != SP_REGNUM && regnum != PC_REGNUM
- && deprecated_get_frame_saved_regs (frame)[regnum])
- {
- /* Floating point registers must not be sign extended,
- in case MIPS_SAVED_REGSIZE = 4 but sizeof (FP0_REGNUM) == 8. */
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
- if (mips_regnum (current_gdbarch)->fp0 <= regnum && regnum < mips_regnum (current_gdbarch)->fp0 + 32)
- write_register (regnum,
- read_memory_unsigned_integer (deprecated_get_frame_saved_regs (frame)[regnum],
- MIPS_SAVED_REGSIZE));
- else
- write_register (regnum,
- read_memory_integer (deprecated_get_frame_saved_regs (frame)[regnum],
- MIPS_SAVED_REGSIZE));
- }
+ memcpy (valbuf + lo.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + lo.reg) +
+ lo.reg_offset, lo.len);
- write_register (SP_REGNUM, new_sp);
- flush_cached_frames ();
+ if (hi.len > 0)
+ memcpy (valbuf + hi.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + hi.reg) +
+ hi.reg_offset, hi.len);
+}
- if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
- {
- struct linked_proc_info *pi_ptr, *prev_ptr;
+/* Given a return value in `valbuf' with a type `valtype', write it's
+ value into the appropriate register. */
- for (pi_ptr = linked_proc_desc_table, prev_ptr = NULL;
- pi_ptr != NULL;
- prev_ptr = pi_ptr, pi_ptr = pi_ptr->next)
- {
- if (&pi_ptr->info == proc_desc)
- break;
- }
+static void
+mips_eabi_store_return_value (struct type *valtype, char *valbuf)
+{
+ char raw_buffer[MAX_REGISTER_SIZE];
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
- if (pi_ptr == NULL)
- error ("Can't locate dummy extra frame info\n");
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg),
+ raw_buffer, register_size (current_gdbarch,
+ lo.reg));
- if (prev_ptr != NULL)
- prev_ptr->next = pi_ptr->next;
- else
- linked_proc_desc_table = pi_ptr->next;
-
- xfree (pi_ptr);
-
- write_register (mips_regnum (current_gdbarch)->hi,
- read_memory_integer (new_sp - 2 * MIPS_SAVED_REGSIZE,
- MIPS_SAVED_REGSIZE));
- write_register (mips_regnum (current_gdbarch)->lo,
- read_memory_integer (new_sp - 3 * MIPS_SAVED_REGSIZE,
- MIPS_SAVED_REGSIZE));
- if (MIPS_FPU_TYPE != MIPS_FPU_NONE)
- write_register (mips_regnum (current_gdbarch)->fp_control_status,
- read_memory_integer (new_sp - 4 * MIPS_SAVED_REGSIZE,
- MIPS_SAVED_REGSIZE));
+ if (hi.len > 0)
+ {
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg),
+ raw_buffer,
+ register_size (current_gdbarch,
+ hi.reg));
}
}
-/* Floating point register management.
-
- Background: MIPS1 & 2 fp registers are 32 bits wide. To support
- 64bit operations, these early MIPS cpus treat fp register pairs
- (f0,f1) as a single register (d0). Later MIPS cpu's have 64 bit fp
- registers and offer a compatibility mode that emulates the MIPS2 fp
- model. When operating in MIPS2 fp compat mode, later cpu's split
- double precision floats into two 32-bit chunks and store them in
- consecutive fp regs. To display 64-bit floats stored in this
- fashion, we have to combine 32 bits from f0 and 32 bits from f1.
- Throw in user-configurable endianness and you have a real mess.
+/* N32/N64 ABI stuff. */
- The way this works is:
- - If we are in 32-bit mode or on a 32-bit processor, then a 64-bit
- double-precision value will be split across two logical registers.
- The lower-numbered logical register will hold the low-order bits,
- regardless of the processor's endianness.
- - If we are on a 64-bit processor, and we are looking for a
- single-precision value, it will be in the low ordered bits
- of a 64-bit GPR (after mfc1, for example) or a 64-bit register
- save slot in memory.
- - If we are in 64-bit mode, everything is straightforward.
+static CORE_ADDR
+mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ int argreg;
+ int float_argreg;
+ int argnum;
+ int len = 0;
+ int stack_offset = 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ CORE_ADDR func_addr = find_function_addr (function, NULL);
- Note that this code only deals with "live" registers at the top of the
- stack. We will attempt to deal with saved registers later, when
- the raw/cooked register interface is in place. (We need a general
- interface that can deal with dynamic saved register sizes -- fp
- regs could be 32 bits wide in one frame and 64 on the frame above
- and below). */
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
-static struct type *
-mips_float_register_type (void)
-{
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- return builtin_type_ieee_single_big;
- else
- return builtin_type_ieee_single_little;
-}
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
-static struct type *
-mips_double_register_type (void)
-{
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- return builtin_type_ieee_double_big;
- else
- return builtin_type_ieee_double_little;
-}
+ /* First ensure that the stack and structure return address (if any)
+ are properly aligned. The stack has to be at least 64-bit
+ aligned even on 32-bit machines, because doubles must be 64-bit
+ aligned. For n32 and n64, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
-/* Copy a 32-bit single-precision value from the current frame
- into rare_buffer. */
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
-static void
-mips_read_fp_register_single (struct frame_info *frame, int regno,
- char *rare_buffer)
-{
- int raw_size = register_size (current_gdbarch, regno);
- char *raw_buffer = alloca (raw_size);
+ /* Now make space on the stack for the args. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (gdbarch));
+ sp -= align_up (len, 16);
- if (!frame_register_read (frame, regno, raw_buffer))
- error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
- if (raw_size == 8)
- {
- /* We have a 64-bit value for this register. Find the low-order
- 32 bits. */
- int offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_n32n64_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- offset = 4;
- else
- offset = 0;
+ /* Initialize the integer and float register pointers. */
+ argreg = A0_REGNUM;
+ float_argreg = mips_fpa0_regnum (current_gdbarch);
- memcpy (rare_buffer, raw_buffer + offset, 4);
- }
- else
+ /* The struct_return pointer occupies the first parameter-passing reg. */
+ if (struct_return)
{
- memcpy (rare_buffer, raw_buffer, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_n32n64_push_dummy_call: struct_return reg=%d 0x%s\n",
+ argreg, paddr_nz (struct_addr));
+ write_register (argreg++, struct_addr);
}
-}
-/* Copy a 64-bit double-precision value from the current frame into
- rare_buffer. This may include getting half of it from the next
- register. */
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. Loop thru args
+ from first to last. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ char *val;
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ int len = TYPE_LENGTH (arg_type);
+ enum type_code typecode = TYPE_CODE (arg_type);
-static void
-mips_read_fp_register_double (struct frame_info *frame, int regno,
- char *rare_buffer)
-{
- int raw_size = register_size (current_gdbarch, regno);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_n32n64_push_dummy_call: %d len=%d type=%d",
+ argnum + 1, len, (int) typecode);
- if (raw_size == 8 && !mips2_fp_compat ())
- {
- /* We have a 64-bit value for this register, and we should use
- all 64 bits. */
- if (!frame_register_read (frame, regno, rare_buffer))
- error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
- }
- else
- {
- if ((regno - mips_regnum (current_gdbarch)->fp0) & 1)
- internal_error (__FILE__, __LINE__,
- "mips_read_fp_register_double: bad access to "
- "odd-numbered FP register");
+ val = (char *) VALUE_CONTENTS (arg);
- /* mips_read_fp_register_single will find the correct 32 bits from
- each register. */
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ if (fp_register_arg_p (typecode, arg_type)
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
- mips_read_fp_register_single (frame, regno, rare_buffer + 4);
- mips_read_fp_register_single (frame, regno + 1, rare_buffer);
+ /* This is a floating point value that fits entirely
+ in a single register. */
+ /* On 32 bit ABI's the float_argreg is further adjusted
+ above to ensure that it is even register aligned. */
+ LONGEST regval = extract_unsigned_integer (val, len);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
+ write_register (float_argreg++, regval);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, len));
+ write_register (argreg, regval);
+ argreg += 1;
}
else
{
- mips_read_fp_register_single (frame, regno, rare_buffer);
- mips_read_fp_register_single (frame, regno + 1, rare_buffer + 4);
- }
- }
-}
+ /* Copy the argument to general registers or the stack in
+ register-sized pieces. Large arguments are split between
+ registers and stack. */
+ /* Note: structs whose size is not a multiple of
+ mips_abi_regsize() are treated specially: Irix cc passes
+ them in registers where gcc sometimes puts them on the
+ stack. For maximum compatibility, we will put them in
+ both places. */
+ int odd_sized_struct = ((len > mips_abi_regsize (gdbarch))
+ && (len % mips_abi_regsize (gdbarch) != 0));
+ /* Note: Floating-point values that didn't fit into an FP
+ register are only written to memory. */
+ while (len > 0)
+ {
+ /* Rememer if the argument was written to the stack. */
+ int stack_used_p = 0;
+ int partial_len = (len < mips_abi_regsize (gdbarch)
+ ? len : mips_abi_regsize (gdbarch));
-static void
-mips_print_fp_register (struct ui_file *file, struct frame_info *frame,
- int regnum)
-{ /* do values for FP (float) regs */
- char *raw_buffer;
- double doub, flt1, flt2; /* doubles extracted from raw hex data */
- int inv1, inv2, namelen;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
+ partial_len);
- raw_buffer = (char *) alloca (2 * register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0));
+ /* Write this portion of the argument to the stack. */
+ if (argreg > MIPS_LAST_ARG_REGNUM
+ || odd_sized_struct
+ || fp_register_arg_p (typecode, arg_type))
+ {
+ /* Should shorter than int integer values be
+ promoted to int before being stored? */
+ int longword_offset = 0;
+ CORE_ADDR addr;
+ stack_used_p = 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ if (mips_stack_argsize (gdbarch) == 8
+ && (typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (gdbarch) - len;
+ }
- fprintf_filtered (file, "%s:", REGISTER_NAME (regnum));
- fprintf_filtered (file, "%*s", 4 - (int) strlen (REGISTER_NAME (regnum)),
- "");
+ if (mips_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s",
+ paddr_nz (stack_offset));
+ fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s",
+ paddr_nz (longword_offset));
+ }
- if (register_size (current_gdbarch, regnum) == 4 || mips2_fp_compat ())
- {
- /* 4-byte registers: Print hex and floating. Also print even
- numbered registers as doubles. */
- mips_read_fp_register_single (frame, regnum, raw_buffer);
- flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1);
+ addr = sp + stack_offset + longword_offset;
- print_scalar_formatted (raw_buffer, builtin_type_uint32, 'x', 'w', file);
+ if (mips_debug)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ paddr_nz (addr));
+ for (i = 0; i < partial_len; i++)
+ {
+ fprintf_unfiltered (gdb_stdlog, "%02x",
+ val[i] & 0xff);
+ }
+ }
+ write_memory (addr, val, partial_len);
+ }
- fprintf_filtered (file, " flt: ");
- if (inv1)
- fprintf_filtered (file, " <invalid float> ");
- else
- fprintf_filtered (file, "%-17.9g", flt1);
+ /* Note!!! This is NOT an else clause. Odd sized
+ structs may go thru BOTH paths. Floating point
+ arguments will not. */
+ /* Write this portion of the argument to a general
+ purpose register. */
+ if (argreg <= MIPS_LAST_ARG_REGNUM
+ && !fp_register_arg_p (typecode, arg_type))
+ {
+ LONGEST regval =
+ extract_unsigned_integer (val, partial_len);
- if (regnum % 2 == 0)
- {
- mips_read_fp_register_double (frame, regnum, raw_buffer);
- doub = unpack_double (mips_double_register_type (), raw_buffer,
- &inv2);
+ /* A non-floating-point argument being passed in a
+ general register. If a struct or union, and if
+ the remaining length is smaller than the register
+ size, we have to adjust the register value on
+ big endian targets.
- fprintf_filtered (file, " dbl: ");
- if (inv2)
- fprintf_filtered (file, "<invalid double>");
- else
- fprintf_filtered (file, "%-24.17g", doub);
- }
- }
- else
- {
- /* Eight byte registers: print each one as hex, float and double. */
- mips_read_fp_register_single (frame, regnum, raw_buffer);
- flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1);
+ It does not seem to be necessary to do the
+ same for integral types.
- mips_read_fp_register_double (frame, regnum, raw_buffer);
- doub = unpack_double (mips_double_register_type (), raw_buffer, &inv2);
+ cagney/2001-07-23: gdb/179: Also, GCC, when
+ outputting LE O32 with sizeof (struct) <
+ mips_abi_regsize(), generates a left shift as
+ part of storing the argument in a register a
+ register (the left shift isn't generated when
+ sizeof (struct) >= mips_abi_regsize()). Since
+ it is quite possible that this is GCC
+ contradicting the LE/O32 ABI, GDB has not been
+ adjusted to accommodate this. Either someone
+ needs to demonstrate that the LE/O32 ABI
+ specifies such a left shift OR this new ABI gets
+ identified as such and GDB gets tweaked
+ accordingly. */
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && partial_len < mips_abi_regsize (gdbarch)
+ && (typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION))
+ regval <<= ((mips_abi_regsize (gdbarch) - partial_len) *
+ TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
+ argreg,
+ phex (regval,
+ mips_abi_regsize (gdbarch)));
+ write_register (argreg, regval);
+ argreg++;
+ }
- print_scalar_formatted (raw_buffer, builtin_type_uint64, 'x', 'g', file);
+ len -= partial_len;
+ val += partial_len;
- fprintf_filtered (file, " flt: ");
- if (inv1)
- fprintf_filtered (file, "<invalid float>");
- else
- fprintf_filtered (file, "%-17.9g", flt1);
+ /* Compute the the offset into the stack at which we
+ will copy the next parameter.
- fprintf_filtered (file, " dbl: ");
- if (inv2)
- fprintf_filtered (file, "<invalid double>");
- else
- fprintf_filtered (file, "%-24.17g", doub);
+ In N32 (N64?), the stack_offset only needs to be
+ adjusted when it has been used. */
+
+ if (stack_used_p)
+ stack_offset += align_up (partial_len,
+ mips_stack_argsize (gdbarch));
+ }
+ }
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
}
+
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
+
+ /* Return adjusted stack pointer. */
+ return sp;
}
-static void
-mips_print_register (struct ui_file *file, struct frame_info *frame,
- int regnum, int all)
+static enum return_value_convention
+mips_n32n64_return_value (struct gdbarch *gdbarch,
+ struct type *type, struct regcache *regcache,
+ void *readbuf, const void *writebuf)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- char raw_buffer[MAX_REGISTER_SIZE];
- int offset;
-
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_CODE (type) == TYPE_CODE_ARRAY
+ || TYPE_LENGTH (type) > 2 * mips_abi_regsize (gdbarch))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
{
- mips_print_fp_register (file, frame, regnum);
- return;
+ /* A floating-point value belongs in the least significant part
+ of FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0,
+ TYPE_LENGTH (type),
+ TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
-
- /* Get the data in raw format. */
- if (!frame_register_read (frame, regnum, raw_buffer))
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ && TYPE_NFIELDS (type) <= 2
+ && TYPE_NFIELDS (type) >= 1
+ && ((TYPE_NFIELDS (type) == 1
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT))
+ || (TYPE_NFIELDS (type) == 2
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT)
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
+ == TYPE_CODE_FLT)))
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
{
- fprintf_filtered (file, "%s: [Invalid]", REGISTER_NAME (regnum));
- return;
+ /* A struct that contains one or two floats. Each value is part
+ in the least significant part of their floating point
+ register.. */
+ int regnum;
+ int field;
+ for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
+ field < TYPE_NFIELDS (type); field++, regnum += 2)
+ {
+ int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
+ / TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n",
+ offset);
+ mips_xfer_register (regcache, NUM_REGS + regnum,
+ TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
+ {
+ /* A structure or union. Extract the left justified value,
+ regardless of the byte order. I.e. DO NOT USE
+ mips_xfer_lower. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (current_gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (current_gdbarch, regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else
+ {
+ /* A scalar extract each part but least-significant-byte
+ justified. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (current_gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (current_gdbarch, regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
+}
- fputs_filtered (REGISTER_NAME (regnum), file);
+/* O32 ABI stuff. */
- /* The problem with printing numeric register names (r26, etc.) is that
- the user can't use them on input. Probably the best solution is to
- fix it so that either the numeric or the funky (a2, etc.) names
- are accepted on input. */
- if (regnum < MIPS_NUMREGS)
- fprintf_filtered (file, "(r%d): ", regnum);
- else
- fprintf_filtered (file, ": ");
+static CORE_ADDR
+mips_o32_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ int argreg;
+ int float_argreg;
+ int argnum;
+ int len = 0;
+ int stack_offset = 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ CORE_ADDR func_addr = find_function_addr (function, NULL);
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- offset = register_size (current_gdbarch, regnum) - register_size (current_gdbarch, regnum);
- else
- offset = 0;
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
- print_scalar_formatted (raw_buffer + offset, gdbarch_register_type (gdbarch, regnum),
- 'x', 0, file);
-}
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
-/* Replacement for generic do_registers_info.
- Print regs in pretty columns. */
+ /* First ensure that the stack and structure return address (if any)
+ are properly aligned. The stack has to be at least 64-bit
+ aligned even on 32-bit machines, because doubles must be 64-bit
+ aligned. For n32 and n64, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
-static int
-print_fp_register_row (struct ui_file *file, struct frame_info *frame,
- int regnum)
-{
- fprintf_filtered (file, " ");
- mips_print_fp_register (file, frame, regnum);
- fprintf_filtered (file, "\n");
- return regnum + 1;
-}
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
+ /* Now make space on the stack for the args. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (gdbarch));
+ sp -= align_up (len, 16);
-/* Print a row's worth of GP (int) registers, with name labels above */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o32_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
-static int
-print_gp_register_row (struct ui_file *file, struct frame_info *frame,
- int start_regnum)
-{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- /* do values for GP (int) regs */
- char raw_buffer[MAX_REGISTER_SIZE];
- int ncols = (mips_regsize (gdbarch) == 8 ? 4 : 8); /* display cols per row */
- int col, byte;
- int regnum;
+ /* Initialize the integer and float register pointers. */
+ argreg = A0_REGNUM;
+ float_argreg = mips_fpa0_regnum (current_gdbarch);
- /* For GP registers, we print a separate row of names above the vals */
- fprintf_filtered (file, " ");
- for (col = 0, regnum = start_regnum;
- col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS;
- regnum++)
+ /* The struct_return pointer occupies the first parameter-passing reg. */
+ if (struct_return)
{
- if (*REGISTER_NAME (regnum) == '\0')
- continue; /* unused register */
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
- break; /* end the row: reached FP register */
- fprintf_filtered (file, mips_regsize (current_gdbarch) == 8 ? "%17s" : "%9s",
- REGISTER_NAME (regnum));
- col++;
- }
- /* print the R0 to R31 names */
- if ((start_regnum % NUM_REGS) < MIPS_NUMREGS)
- fprintf_filtered (file, "\n R%-4d", start_regnum % NUM_REGS);
- else
- fprintf_filtered (file, "\n ");
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o32_push_dummy_call: struct_return reg=%d 0x%s\n",
+ argreg, paddr_nz (struct_addr));
+ write_register (argreg++, struct_addr);
+ stack_offset += mips_stack_argsize (gdbarch);
+ }
- /* now print the values in hex, 4 or 8 to the row */
- for (col = 0, regnum = start_regnum;
- col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS;
- regnum++)
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. Loop thru args
+ from first to last. */
+ for (argnum = 0; argnum < nargs; argnum++)
{
- if (*REGISTER_NAME (regnum) == '\0')
- continue; /* unused register */
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
- break; /* end row: reached FP register */
- /* OK: get the data in raw format. */
- if (!frame_register_read (frame, regnum, raw_buffer))
- error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
- /* pad small registers */
- for (byte = 0;
- byte < (mips_regsize (current_gdbarch)
- - register_size (current_gdbarch, regnum));
- byte++)
- printf_filtered (" ");
- /* Now print the register value in hex, endian order. */
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- for (byte = register_size (current_gdbarch, regnum) - register_size (current_gdbarch, regnum);
- byte < register_size (current_gdbarch, regnum);
- byte++)
- fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
- else
- for (byte = register_size (current_gdbarch, regnum) - 1;
- byte >= 0;
- byte--)
- fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
- fprintf_filtered (file, " ");
- col++;
- }
- if (col > 0) /* ie. if we actually printed anything... */
- fprintf_filtered (file, "\n");
+ char *val;
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ int len = TYPE_LENGTH (arg_type);
+ enum type_code typecode = TYPE_CODE (arg_type);
- return regnum;
-}
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o32_push_dummy_call: %d len=%d type=%d",
+ argnum + 1, len, (int) typecode);
-/* MIPS_DO_REGISTERS_INFO(): called by "info register" command */
+ val = (char *) VALUE_CONTENTS (arg);
-static void
-mips_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file,
- struct frame_info *frame, int regnum, int all)
-{
- if (regnum != -1) /* do one specified register */
- {
- gdb_assert (regnum >= NUM_REGS);
- if (*(REGISTER_NAME (regnum)) == '\0')
- error ("Not a valid register for the current processor type");
+ /* 32-bit ABIs always start floating point arguments in an
+ even-numbered floating point register. Round the FP register
+ up before the check to see if there are any FP registers
+ left. O32/O64 targets also pass the FP in the integer
+ registers so also round up normal registers. */
+ if (mips_abi_regsize (gdbarch) < 8
+ && fp_register_arg_p (typecode, arg_type))
+ {
+ if ((float_argreg & 1))
+ float_argreg++;
+ }
- mips_print_register (file, frame, regnum, 0);
- fprintf_filtered (file, "\n");
- }
- else
- /* do all (or most) registers */
- {
- regnum = NUM_REGS;
- while (regnum < NUM_REGS + NUM_PSEUDO_REGS)
+ /* Floating point arguments passed in registers have to be
+ treated specially. On 32-bit architectures, doubles
+ are passed in register pairs; the even register gets
+ the low word, and the odd register gets the high word.
+ On O32/O64, the first two floating point arguments are
+ also copied to general registers, because MIPS16 functions
+ don't use float registers for arguments. This duplication of
+ arguments in general registers can't hurt non-MIPS16 functions
+ because those registers are normally skipped. */
+
+ if (fp_register_arg_p (typecode, arg_type)
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ if (mips_abi_regsize (gdbarch) < 8 && len == 8)
{
- if (all) /* true for "INFO ALL-REGISTERS" command */
- regnum = print_fp_register_row (file, frame, regnum);
- else
- regnum += MIPS_NUMREGS; /* skip floating point regs */
+ int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
+ unsigned long regval;
+
+ /* Write the low word of the double to the even register(s). */
+ regval = extract_unsigned_integer (val + low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
+ write_register (float_argreg++, regval);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
+
+ /* Write the high word of the double to the odd register(s). */
+ regval = extract_unsigned_integer (val + 4 - low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
+ write_register (float_argreg++, regval);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
}
else
- regnum = print_gp_register_row (file, frame, regnum);
+ {
+ /* This is a floating point value that fits entirely
+ in a single register. */
+ /* On 32 bit ABI's the float_argreg is further adjusted
+ above to ensure that it is even register aligned. */
+ LONGEST regval = extract_unsigned_integer (val, len);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
+ write_register (float_argreg++, regval);
+ /* CAGNEY: 32 bit MIPS ABI's always reserve two FP
+ registers for each argument. The below is (my
+ guess) to ensure that the corresponding integer
+ register has reserved the same space. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, len));
+ write_register (argreg, regval);
+ argreg += (mips_abi_regsize (gdbarch) == 8) ? 1 : 2;
+ }
+ /* Reserve space for the FP register. */
+ stack_offset += align_up (len, mips_stack_argsize (gdbarch));
}
- }
-}
+ else
+ {
+ /* Copy the argument to general registers or the stack in
+ register-sized pieces. Large arguments are split between
+ registers and stack. */
+ /* Note: structs whose size is not a multiple of
+ mips_abi_regsize() are treated specially: Irix cc passes
+ them in registers where gcc sometimes puts them on the
+ stack. For maximum compatibility, we will put them in
+ both places. */
+ int odd_sized_struct = ((len > mips_abi_regsize (gdbarch))
+ && (len % mips_abi_regsize (gdbarch) != 0));
+ /* Structures should be aligned to eight bytes (even arg registers)
+ on MIPS_ABI_O32, if their first member has double precision. */
+ if (mips_abi_regsize (gdbarch) < 8
+ && mips_type_needs_double_align (arg_type))
+ {
+ if ((argreg & 1))
+ argreg++;
+ }
+ /* Note: Floating-point values that didn't fit into an FP
+ register are only written to memory. */
+ while (len > 0)
+ {
+ /* Remember if the argument was written to the stack. */
+ int stack_used_p = 0;
+ int partial_len = (len < mips_abi_regsize (gdbarch)
+ ? len : mips_abi_regsize (gdbarch));
-/* Is this a branch with a delay slot? */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
+ partial_len);
-static int is_delayed (unsigned long);
+ /* Write this portion of the argument to the stack. */
+ if (argreg > MIPS_LAST_ARG_REGNUM
+ || odd_sized_struct
+ || fp_register_arg_p (typecode, arg_type))
+ {
+ /* Should shorter than int integer values be
+ promoted to int before being stored? */
+ int longword_offset = 0;
+ CORE_ADDR addr;
+ stack_used_p = 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ if (mips_stack_argsize (gdbarch) == 8
+ && (typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (gdbarch) - len;
+ }
-static int
-is_delayed (unsigned long insn)
-{
- int i;
- for (i = 0; i < NUMOPCODES; ++i)
- if (mips_opcodes[i].pinfo != INSN_MACRO
- && (insn & mips_opcodes[i].mask) == mips_opcodes[i].match)
- break;
- return (i < NUMOPCODES
- && (mips_opcodes[i].pinfo & (INSN_UNCOND_BRANCH_DELAY
- | INSN_COND_BRANCH_DELAY
- | INSN_COND_BRANCH_LIKELY)));
-}
+ if (mips_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s",
+ paddr_nz (stack_offset));
+ fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s",
+ paddr_nz (longword_offset));
+ }
-int
-mips_step_skips_delay (CORE_ADDR pc)
-{
- char buf[MIPS_INSTLEN];
+ addr = sp + stack_offset + longword_offset;
- /* There is no branch delay slot on MIPS16. */
- if (pc_is_mips16 (pc))
- return 0;
+ if (mips_debug)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ paddr_nz (addr));
+ for (i = 0; i < partial_len; i++)
+ {
+ fprintf_unfiltered (gdb_stdlog, "%02x",
+ val[i] & 0xff);
+ }
+ }
+ write_memory (addr, val, partial_len);
+ }
- if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0)
- /* If error reading memory, guess that it is not a delayed branch. */
- return 0;
- return is_delayed ((unsigned long) extract_unsigned_integer (buf, MIPS_INSTLEN));
-}
+ /* Note!!! This is NOT an else clause. Odd sized
+ structs may go thru BOTH paths. Floating point
+ arguments will not. */
+ /* Write this portion of the argument to a general
+ purpose register. */
+ if (argreg <= MIPS_LAST_ARG_REGNUM
+ && !fp_register_arg_p (typecode, arg_type))
+ {
+ LONGEST regval = extract_signed_integer (val, partial_len);
+ /* Value may need to be sign extended, because
+ mips_isa_regsize() != mips_abi_regsize(). */
+ /* A non-floating-point argument being passed in a
+ general register. If a struct or union, and if
+ the remaining length is smaller than the register
+ size, we have to adjust the register value on
+ big endian targets.
-/* Given PC at the function's start address, attempt to find the
- prologue end using SAL information. Return zero if the skip fails.
+ It does not seem to be necessary to do the
+ same for integral types.
- A non-optimized prologue traditionally has one SAL for the function
- and a second for the function body. A single line function has
- them both pointing at the same line.
+ Also don't do this adjustment on O64 binaries.
- An optimized prologue is similar but the prologue may contain
- instructions (SALs) from the instruction body. Need to skip those
- while not getting into the function body.
+ cagney/2001-07-23: gdb/179: Also, GCC, when
+ outputting LE O32 with sizeof (struct) <
+ mips_abi_regsize(), generates a left shift as
+ part of storing the argument in a register a
+ register (the left shift isn't generated when
+ sizeof (struct) >= mips_abi_regsize()). Since
+ it is quite possible that this is GCC
+ contradicting the LE/O32 ABI, GDB has not been
+ adjusted to accommodate this. Either someone
+ needs to demonstrate that the LE/O32 ABI
+ specifies such a left shift OR this new ABI gets
+ identified as such and GDB gets tweaked
+ accordingly. */
+
+ if (mips_abi_regsize (gdbarch) < 8
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && partial_len < mips_abi_regsize (gdbarch)
+ && (typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION))
+ regval <<= ((mips_abi_regsize (gdbarch) - partial_len) *
+ TARGET_CHAR_BIT);
- The functions end point and an increasing SAL line are used as
- indicators of the prologue's endpoint.
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
+ argreg,
+ phex (regval,
+ mips_abi_regsize (gdbarch)));
+ write_register (argreg, regval);
+ argreg++;
- This code is based on the function refine_prologue_limit (versions
- found in both ia64 and ppc). */
+ /* Prevent subsequent floating point arguments from
+ being passed in floating point registers. */
+ float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
+ }
-static CORE_ADDR
-skip_prologue_using_sal (CORE_ADDR func_addr)
-{
- struct symtab_and_line prologue_sal;
- CORE_ADDR start_pc;
- CORE_ADDR end_pc;
+ len -= partial_len;
+ val += partial_len;
- /* Get an initial range for the function. */
- find_pc_partial_function (func_addr, NULL, &start_pc, &end_pc);
- start_pc += FUNCTION_START_OFFSET;
+ /* Compute the the offset into the stack at which we
+ will copy the next parameter.
- prologue_sal = find_pc_line (start_pc, 0);
- if (prologue_sal.line != 0)
- {
- while (prologue_sal.end < end_pc)
- {
- struct symtab_and_line sal;
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated. */
- sal = find_pc_line (prologue_sal.end, 0);
- if (sal.line == 0)
- break;
- /* Assume that a consecutive SAL for the same (or larger)
- line mark the prologue -> body transition. */
- if (sal.line >= prologue_sal.line)
- break;
- /* The case in which compiler's optimizer/scheduler has
- moved instructions into the prologue. We look ahead in
- the function looking for address ranges whose
- corresponding line number is less the first one that we
- found for the function. This is more conservative then
- refine_prologue_limit which scans a large number of SALs
- looking for any in the prologue */
- prologue_sal = sal;
+ stack_offset += align_up (partial_len,
+ mips_stack_argsize (gdbarch));
+ }
}
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
}
- return prologue_sal.end;
+
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
+
+ /* Return adjusted stack pointer. */
+ return sp;
}
-/* Skip the PC past function prologue instructions (32-bit version).
- This is a helper function for mips_skip_prologue. */
+static enum return_value_convention
+mips_o32_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache,
+ void *readbuf, const void *writebuf)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_CODE (type) == TYPE_CODE_ARRAY)
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 4 && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A single-precision floating-point value. It fits in the
+ least significant part of FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0,
+ TYPE_LENGTH (type),
+ TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 8 && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A double-precision floating-point value. The most
+ significant part goes in FP1, and the least significant in
+ FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp1/$fp0\n");
+ switch (TARGET_BYTE_ORDER)
+ {
+ case BFD_ENDIAN_LITTLE:
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 1, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
+ break;
+ case BFD_ENDIAN_BIG:
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 1, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+#if 0
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ && TYPE_NFIELDS (type) <= 2
+ && TYPE_NFIELDS (type) >= 1
+ && ((TYPE_NFIELDS (type) == 1
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT))
+ || (TYPE_NFIELDS (type) == 2
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT)
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
+ == TYPE_CODE_FLT)))
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A struct that contains one or two floats. Each value is part
+ in the least significant part of their floating point
+ register.. */
+ bfd_byte reg[MAX_REGISTER_SIZE];
+ int regnum;
+ int field;
+ for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
+ field < TYPE_NFIELDS (type); field++, regnum += 2)
+ {
+ int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
+ / TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n",
+ offset);
+ mips_xfer_register (regcache, NUM_REGS + regnum,
+ TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+#endif
+#if 0
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
+ {
+ /* A structure or union. Extract the left justified value,
+ regardless of the byte order. I.e. DO NOT USE
+ mips_xfer_lower. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (current_gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (current_gdbarch, regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+#endif
+ else
+ {
+ /* A scalar extract each part but least-significant-byte
+ justified. o32 thinks registers are 4 byte, regardless of
+ the ISA. mips_stack_argsize controls this. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += mips_stack_argsize (gdbarch), regnum++)
+ {
+ int xfer = mips_stack_argsize (gdbarch);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+}
+
+/* O64 ABI. This is a hacked up kind of 64-bit version of the o32
+ ABI. */
static CORE_ADDR
-mips32_skip_prologue (CORE_ADDR pc)
+mips_o64_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs,
+ struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
- t_inst inst;
- CORE_ADDR end_pc;
- int seen_sp_adjust = 0;
- int load_immediate_bytes = 0;
+ int argreg;
+ int float_argreg;
+ int argnum;
+ int len = 0;
+ int stack_offset = 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ CORE_ADDR func_addr = find_function_addr (function, NULL);
- /* Find an upper bound on the prologue. */
- end_pc = skip_prologue_using_sal (pc);
- if (end_pc == 0)
- end_pc = pc + 100; /* Magic. */
+ /* For shared libraries, "t9" needs to point at the function
+ address. */
+ regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr);
- /* Skip the typical prologue instructions. These are the stack adjustment
- instruction and the instructions that save registers on the stack
- or in the gcc frame. */
- for (; pc < end_pc; pc += MIPS_INSTLEN)
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr);
+
+ /* First ensure that the stack and structure return address (if any)
+ are properly aligned. The stack has to be at least 64-bit
+ aligned even on 32-bit machines, because doubles must be 64-bit
+ aligned. For n32 and n64, stack frames need to be 128-bit
+ aligned, so we round to this widest known alignment. */
+
+ sp = align_down (sp, 16);
+ struct_addr = align_down (struct_addr, 16);
+
+ /* Now make space on the stack for the args. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (gdbarch));
+ sp -= align_up (len, 16);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o64_push_dummy_call: sp=0x%s allocated %ld\n",
+ paddr_nz (sp), (long) align_up (len, 16));
+
+ /* Initialize the integer and float register pointers. */
+ argreg = A0_REGNUM;
+ float_argreg = mips_fpa0_regnum (current_gdbarch);
+
+ /* The struct_return pointer occupies the first parameter-passing reg. */
+ if (struct_return)
{
- unsigned long high_word;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o64_push_dummy_call: struct_return reg=%d 0x%s\n",
+ argreg, paddr_nz (struct_addr));
+ write_register (argreg++, struct_addr);
+ stack_offset += mips_stack_argsize (gdbarch);
+ }
- inst = mips_fetch_instruction (pc);
- high_word = (inst >> 16) & 0xffff;
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. Loop thru args
+ from first to last. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ char *val;
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ int len = TYPE_LENGTH (arg_type);
+ enum type_code typecode = TYPE_CODE (arg_type);
- if (high_word == 0x27bd /* addiu $sp,$sp,offset */
- || high_word == 0x67bd) /* daddiu $sp,$sp,offset */
- seen_sp_adjust = 1;
- else if (inst == 0x03a1e823 || /* subu $sp,$sp,$at */
- inst == 0x03a8e823) /* subu $sp,$sp,$t0 */
- seen_sp_adjust = 1;
- else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */
- || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */
- && (inst & 0x001F0000)) /* reg != $zero */
- continue;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_o64_push_dummy_call: %d len=%d type=%d",
+ argnum + 1, len, (int) typecode);
- else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */
- continue;
- else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000))
- /* sx reg,n($s8) */
- continue; /* reg != $zero */
+ val = (char *) VALUE_CONTENTS (arg);
- /* move $s8,$sp. With different versions of gas this will be either
- `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'.
- Accept any one of these. */
- else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
- continue;
+ /* 32-bit ABIs always start floating point arguments in an
+ even-numbered floating point register. Round the FP register
+ up before the check to see if there are any FP registers
+ left. O32/O64 targets also pass the FP in the integer
+ registers so also round up normal registers. */
+ if (mips_abi_regsize (gdbarch) < 8
+ && fp_register_arg_p (typecode, arg_type))
+ {
+ if ((float_argreg & 1))
+ float_argreg++;
+ }
- else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */
- continue;
- else if (high_word == 0x3c1c) /* lui $gp,n */
- continue;
- else if (high_word == 0x279c) /* addiu $gp,$gp,n */
- continue;
- else if (inst == 0x0399e021 /* addu $gp,$gp,$t9 */
- || inst == 0x033ce021) /* addu $gp,$t9,$gp */
- continue;
- /* The following instructions load $at or $t0 with an immediate
- value in preparation for a stack adjustment via
- subu $sp,$sp,[$at,$t0]. These instructions could also initialize
- a local variable, so we accept them only before a stack adjustment
- instruction was seen. */
- else if (!seen_sp_adjust)
+ /* Floating point arguments passed in registers have to be
+ treated specially. On 32-bit architectures, doubles
+ are passed in register pairs; the even register gets
+ the low word, and the odd register gets the high word.
+ On O32/O64, the first two floating point arguments are
+ also copied to general registers, because MIPS16 functions
+ don't use float registers for arguments. This duplication of
+ arguments in general registers can't hurt non-MIPS16 functions
+ because those registers are normally skipped. */
+
+ if (fp_register_arg_p (typecode, arg_type)
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
- if (high_word == 0x3c01 || /* lui $at,n */
- high_word == 0x3c08) /* lui $t0,n */
+ if (mips_abi_regsize (gdbarch) < 8 && len == 8)
{
- load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
- continue;
+ int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
+ unsigned long regval;
+
+ /* Write the low word of the double to the even register(s). */
+ regval = extract_unsigned_integer (val + low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
+ write_register (float_argreg++, regval);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
+
+ /* Write the high word of the double to the odd register(s). */
+ regval = extract_unsigned_integer (val + 4 - low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
+ write_register (float_argreg++, regval);
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
}
- else if (high_word == 0x3421 || /* ori $at,$at,n */
- high_word == 0x3508 || /* ori $t0,$t0,n */
- high_word == 0x3401 || /* ori $at,$zero,n */
- high_word == 0x3408) /* ori $t0,$zero,n */
+ else
{
- load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
- continue;
+ /* This is a floating point value that fits entirely
+ in a single register. */
+ /* On 32 bit ABI's the float_argreg is further adjusted
+ above to ensure that it is even register aligned. */
+ LONGEST regval = extract_unsigned_integer (val, len);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
+ write_register (float_argreg++, regval);
+ /* CAGNEY: 32 bit MIPS ABI's always reserve two FP
+ registers for each argument. The below is (my
+ guess) to ensure that the corresponding integer
+ register has reserved the same space. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, len));
+ write_register (argreg, regval);
+ argreg += (mips_abi_regsize (gdbarch) == 8) ? 1 : 2;
}
- else
- break;
+ /* Reserve space for the FP register. */
+ stack_offset += align_up (len, mips_stack_argsize (gdbarch));
}
else
- break;
- }
+ {
+ /* Copy the argument to general registers or the stack in
+ register-sized pieces. Large arguments are split between
+ registers and stack. */
+ /* Note: structs whose size is not a multiple of
+ mips_abi_regsize() are treated specially: Irix cc passes
+ them in registers where gcc sometimes puts them on the
+ stack. For maximum compatibility, we will put them in
+ both places. */
+ int odd_sized_struct = ((len > mips_abi_regsize (gdbarch))
+ && (len % mips_abi_regsize (gdbarch) != 0));
+ /* Structures should be aligned to eight bytes (even arg registers)
+ on MIPS_ABI_O32, if their first member has double precision. */
+ if (mips_abi_regsize (gdbarch) < 8
+ && mips_type_needs_double_align (arg_type))
+ {
+ if ((argreg & 1))
+ argreg++;
+ }
+ /* Note: Floating-point values that didn't fit into an FP
+ register are only written to memory. */
+ while (len > 0)
+ {
+ /* Remember if the argument was written to the stack. */
+ int stack_used_p = 0;
+ int partial_len = (len < mips_abi_regsize (gdbarch)
+ ? len : mips_abi_regsize (gdbarch));
- /* In a frameless function, we might have incorrectly
- skipped some load immediate instructions. Undo the skipping
- if the load immediate was not followed by a stack adjustment. */
- if (load_immediate_bytes && !seen_sp_adjust)
- pc -= load_immediate_bytes;
- return pc;
-}
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
+ partial_len);
-/* Skip the PC past function prologue instructions (16-bit version).
- This is a helper function for mips_skip_prologue. */
+ /* Write this portion of the argument to the stack. */
+ if (argreg > MIPS_LAST_ARG_REGNUM
+ || odd_sized_struct
+ || fp_register_arg_p (typecode, arg_type))
+ {
+ /* Should shorter than int integer values be
+ promoted to int before being stored? */
+ int longword_offset = 0;
+ CORE_ADDR addr;
+ stack_used_p = 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ if (mips_stack_argsize (gdbarch) == 8
+ && (typecode == TYPE_CODE_INT
+ || typecode == TYPE_CODE_PTR
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (gdbarch) - len;
+ }
-static CORE_ADDR
-mips16_skip_prologue (CORE_ADDR pc)
-{
- CORE_ADDR end_pc;
- int extend_bytes = 0;
- int prev_extend_bytes;
+ if (mips_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s",
+ paddr_nz (stack_offset));
+ fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s",
+ paddr_nz (longword_offset));
+ }
- /* Table of instructions likely to be found in a function prologue. */
- static struct
- {
- unsigned short inst;
- unsigned short mask;
- }
- table[] =
- {
- {
- 0x6300, 0xff00
- }
- , /* addiu $sp,offset */
- {
- 0xfb00, 0xff00
- }
- , /* daddiu $sp,offset */
- {
- 0xd000, 0xf800
- }
- , /* sw reg,n($sp) */
- {
- 0xf900, 0xff00
- }
- , /* sd reg,n($sp) */
- {
- 0x6200, 0xff00
- }
- , /* sw $ra,n($sp) */
- {
- 0xfa00, 0xff00
- }
- , /* sd $ra,n($sp) */
- {
- 0x673d, 0xffff
- }
- , /* move $s1,sp */
- {
- 0xd980, 0xff80
- }
- , /* sw $a0-$a3,n($s1) */
- {
- 0x6704, 0xff1c
- }
- , /* move reg,$a0-$a3 */
- {
- 0xe809, 0xf81f
- }
- , /* entry pseudo-op */
- {
- 0x0100, 0xff00
- }
- , /* addiu $s1,$sp,n */
- {
- 0, 0
- } /* end of table marker */
- };
+ addr = sp + stack_offset + longword_offset;
- /* Find an upper bound on the prologue. */
- end_pc = skip_prologue_using_sal (pc);
- if (end_pc == 0)
- end_pc = pc + 100; /* Magic. */
+ if (mips_debug)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ paddr_nz (addr));
+ for (i = 0; i < partial_len; i++)
+ {
+ fprintf_unfiltered (gdb_stdlog, "%02x",
+ val[i] & 0xff);
+ }
+ }
+ write_memory (addr, val, partial_len);
+ }
+
+ /* Note!!! This is NOT an else clause. Odd sized
+ structs may go thru BOTH paths. Floating point
+ arguments will not. */
+ /* Write this portion of the argument to a general
+ purpose register. */
+ if (argreg <= MIPS_LAST_ARG_REGNUM
+ && !fp_register_arg_p (typecode, arg_type))
+ {
+ LONGEST regval = extract_signed_integer (val, partial_len);
+ /* Value may need to be sign extended, because
+ mips_isa_regsize() != mips_abi_regsize(). */
+
+ /* A non-floating-point argument being passed in a
+ general register. If a struct or union, and if
+ the remaining length is smaller than the register
+ size, we have to adjust the register value on
+ big endian targets.
+
+ It does not seem to be necessary to do the
+ same for integral types.
+
+ Also don't do this adjustment on O64 binaries.
+
+ cagney/2001-07-23: gdb/179: Also, GCC, when
+ outputting LE O32 with sizeof (struct) <
+ mips_abi_regsize(), generates a left shift as
+ part of storing the argument in a register a
+ register (the left shift isn't generated when
+ sizeof (struct) >= mips_abi_regsize()). Since
+ it is quite possible that this is GCC
+ contradicting the LE/O32 ABI, GDB has not been
+ adjusted to accommodate this. Either someone
+ needs to demonstrate that the LE/O32 ABI
+ specifies such a left shift OR this new ABI gets
+ identified as such and GDB gets tweaked
+ accordingly. */
+
+ if (mips_abi_regsize (gdbarch) < 8
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && partial_len < mips_abi_regsize (gdbarch)
+ && (typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION))
+ regval <<= ((mips_abi_regsize (gdbarch) - partial_len) *
+ TARGET_CHAR_BIT);
+
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
+ argreg,
+ phex (regval,
+ mips_abi_regsize (gdbarch)));
+ write_register (argreg, regval);
+ argreg++;
+
+ /* Prevent subsequent floating point arguments from
+ being passed in floating point registers. */
+ float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
+ }
- /* Skip the typical prologue instructions. These are the stack adjustment
- instruction and the instructions that save registers on the stack
- or in the gcc frame. */
- for (; pc < end_pc; pc += MIPS16_INSTLEN)
- {
- unsigned short inst;
- int i;
+ len -= partial_len;
+ val += partial_len;
- inst = mips_fetch_instruction (pc);
+ /* Compute the the offset into the stack at which we
+ will copy the next parameter.
- /* Normally we ignore an extend instruction. However, if it is
- not followed by a valid prologue instruction, we must adjust
- the pc back over the extend so that it won't be considered
- part of the prologue. */
- if ((inst & 0xf800) == 0xf000) /* extend */
- {
- extend_bytes = MIPS16_INSTLEN;
- continue;
- }
- prev_extend_bytes = extend_bytes;
- extend_bytes = 0;
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated. */
- /* Check for other valid prologue instructions besides extend. */
- for (i = 0; table[i].mask != 0; i++)
- if ((inst & table[i].mask) == table[i].inst) /* found, get out */
- break;
- if (table[i].mask != 0) /* it was in table? */
- continue; /* ignore it */
- else
- /* non-prologue */
- {
- /* Return the current pc, adjusted backwards by 2 if
- the previous instruction was an extend. */
- return pc - prev_extend_bytes;
+ stack_offset += align_up (partial_len,
+ mips_stack_argsize (gdbarch));
+ }
}
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
}
- return pc;
+
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
+
+ /* Return adjusted stack pointer. */
+ return sp;
}
-/* To skip prologues, I use this predicate. Returns either PC itself
- if the code at PC does not look like a function prologue; otherwise
- returns an address that (if we're lucky) follows the prologue. If
- LENIENT, then we must skip everything which is involved in setting
- up the frame (it's OK to skip more, just so long as we don't skip
- anything which might clobber the registers which are being saved.
- We must skip more in the case where part of the prologue is in the
- delay slot of a non-prologue instruction). */
+static void
+mips_o64_extract_return_value (struct type *valtype,
+ char regbuf[], char *valbuf)
+{
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
-static CORE_ADDR
-mips_skip_prologue (CORE_ADDR pc)
+ memcpy (valbuf + lo.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + lo.reg) +
+ lo.reg_offset, lo.len);
+
+ if (hi.len > 0)
+ memcpy (valbuf + hi.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + hi.reg) +
+ hi.reg_offset, hi.len);
+}
+
+static void
+mips_o64_store_return_value (struct type *valtype, char *valbuf)
{
- /* See if we can determine the end of the prologue via the symbol table.
- If so, then return either PC, or the PC after the prologue, whichever
- is greater. */
+ char raw_buffer[MAX_REGISTER_SIZE];
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
- CORE_ADDR post_prologue_pc = after_prologue (pc, NULL);
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg),
+ raw_buffer, register_size (current_gdbarch,
+ lo.reg));
- if (post_prologue_pc != 0)
- return max (pc, post_prologue_pc);
+ if (hi.len > 0)
+ {
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg),
+ raw_buffer,
+ register_size (current_gdbarch,
+ hi.reg));
+ }
+}
- /* Can't determine prologue from the symbol table, need to examine
- instructions. */
+/* Floating point register management.
- if (pc_is_mips16 (pc))
- return mips16_skip_prologue (pc);
+ Background: MIPS1 & 2 fp registers are 32 bits wide. To support
+ 64bit operations, these early MIPS cpus treat fp register pairs
+ (f0,f1) as a single register (d0). Later MIPS cpu's have 64 bit fp
+ registers and offer a compatibility mode that emulates the MIPS2 fp
+ model. When operating in MIPS2 fp compat mode, later cpu's split
+ double precision floats into two 32-bit chunks and store them in
+ consecutive fp regs. To display 64-bit floats stored in this
+ fashion, we have to combine 32 bits from f0 and 32 bits from f1.
+ Throw in user-configurable endianness and you have a real mess.
+
+ The way this works is:
+ - If we are in 32-bit mode or on a 32-bit processor, then a 64-bit
+ double-precision value will be split across two logical registers.
+ The lower-numbered logical register will hold the low-order bits,
+ regardless of the processor's endianness.
+ - If we are on a 64-bit processor, and we are looking for a
+ single-precision value, it will be in the low ordered bits
+ of a 64-bit GPR (after mfc1, for example) or a 64-bit register
+ save slot in memory.
+ - If we are in 64-bit mode, everything is straightforward.
+
+ Note that this code only deals with "live" registers at the top of the
+ stack. We will attempt to deal with saved registers later, when
+ the raw/cooked register interface is in place. (We need a general
+ interface that can deal with dynamic saved register sizes -- fp
+ regs could be 32 bits wide in one frame and 64 on the frame above
+ and below). */
+
+static struct type *
+mips_float_register_type (void)
+{
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ return builtin_type_ieee_single_big;
else
- return mips32_skip_prologue (pc);
+ return builtin_type_ieee_single_little;
}
-/* Determine how a return value is stored within the MIPS register
- file, given the return type `valtype'. */
-
-struct return_value_word
+static struct type *
+mips_double_register_type (void)
{
- int len;
- int reg;
- int reg_offset;
- int buf_offset;
-};
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ return builtin_type_ieee_double_big;
+ else
+ return builtin_type_ieee_double_little;
+}
+
+/* Copy a 32-bit single-precision value from the current frame
+ into rare_buffer. */
static void
-return_value_location (struct type *valtype,
- struct return_value_word *hi,
- struct return_value_word *lo)
+mips_read_fp_register_single (struct frame_info *frame, int regno,
+ char *rare_buffer)
{
- int len = TYPE_LENGTH (valtype);
+ int raw_size = register_size (current_gdbarch, regno);
+ char *raw_buffer = alloca (raw_size);
- if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && ((MIPS_FPU_TYPE == MIPS_FPU_DOUBLE && (len == 4 || len == 8))
- || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE && len == 4)))
+ if (!frame_register_read (frame, regno, raw_buffer))
+ error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ if (raw_size == 8)
{
- if (!FP_REGISTER_DOUBLE && len == 8)
- {
- /* We need to break a 64bit float in two 32 bit halves and
- spread them across a floating-point register pair. */
- lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
- hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4;
- lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0) == 8)
- ? 4 : 0);
- hi->reg_offset = lo->reg_offset;
- lo->reg = mips_regnum (current_gdbarch)->fp0 + 0;
- hi->reg = mips_regnum (current_gdbarch)->fp0 + 1;
- lo->len = 4;
- hi->len = 4;
- }
+ /* We have a 64-bit value for this register. Find the low-order
+ 32 bits. */
+ int offset;
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ offset = 4;
else
- {
- /* The floating point value fits in a single floating-point
- register. */
- lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0) == 8
- && len == 4)
- ? 4 : 0);
- lo->reg = mips_regnum (current_gdbarch)->fp0;
- lo->len = len;
- lo->buf_offset = 0;
- hi->len = 0;
- hi->reg_offset = 0;
- hi->buf_offset = 0;
- hi->reg = 0;
- }
+ offset = 0;
+
+ memcpy (rare_buffer, raw_buffer + offset, 4);
}
else
{
- /* Locate a result possibly spread across two registers. */
- int regnum = 2;
- lo->reg = regnum + 0;
- hi->reg = regnum + 1;
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && len < MIPS_SAVED_REGSIZE)
- {
- /* "un-left-justify" the value in the low register */
- lo->reg_offset = MIPS_SAVED_REGSIZE - len;
- lo->len = len;
- hi->reg_offset = 0;
- hi->len = 0;
- }
- else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && len > MIPS_SAVED_REGSIZE /* odd-size structs */
- && len < MIPS_SAVED_REGSIZE * 2
- && (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
- TYPE_CODE (valtype) == TYPE_CODE_UNION))
- {
- /* "un-left-justify" the value spread across two registers. */
- lo->reg_offset = 2 * MIPS_SAVED_REGSIZE - len;
- lo->len = MIPS_SAVED_REGSIZE - lo->reg_offset;
- hi->reg_offset = 0;
- hi->len = len - lo->len;
- }
- else
- {
- /* Only perform a partial copy of the second register. */
- lo->reg_offset = 0;
- hi->reg_offset = 0;
- if (len > MIPS_SAVED_REGSIZE)
- {
- lo->len = MIPS_SAVED_REGSIZE;
- hi->len = len - MIPS_SAVED_REGSIZE;
- }
- else
- {
- lo->len = len;
- hi->len = 0;
- }
- }
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && register_size (current_gdbarch, regnum) == 8
- && MIPS_SAVED_REGSIZE == 4)
+ memcpy (rare_buffer, raw_buffer, 4);
+ }
+}
+
+/* Copy a 64-bit double-precision value from the current frame into
+ rare_buffer. This may include getting half of it from the next
+ register. */
+
+static void
+mips_read_fp_register_double (struct frame_info *frame, int regno,
+ char *rare_buffer)
+{
+ int raw_size = register_size (current_gdbarch, regno);
+
+ if (raw_size == 8 && !mips2_fp_compat ())
+ {
+ /* We have a 64-bit value for this register, and we should use
+ all 64 bits. */
+ if (!frame_register_read (frame, regno, rare_buffer))
+ error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
+ }
+ else
+ {
+ if ((regno - mips_regnum (current_gdbarch)->fp0) & 1)
+ internal_error (__FILE__, __LINE__,
+ "mips_read_fp_register_double: bad access to "
+ "odd-numbered FP register");
+
+ /* mips_read_fp_register_single will find the correct 32 bits from
+ each register. */
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- /* Account for the fact that only the least-signficant part
- of the register is being used */
- lo->reg_offset += 4;
- hi->reg_offset += 4;
+ mips_read_fp_register_single (frame, regno, rare_buffer + 4);
+ mips_read_fp_register_single (frame, regno + 1, rare_buffer);
+ }
+ else
+ {
+ mips_read_fp_register_single (frame, regno, rare_buffer);
+ mips_read_fp_register_single (frame, regno + 1, rare_buffer + 4);
}
- lo->buf_offset = 0;
- hi->buf_offset = lo->len;
}
}
-/* Given a return value in `regbuf' with a type `valtype', extract and
- copy its value into `valbuf'. */
-
static void
-mips_eabi_extract_return_value (struct type *valtype,
- char regbuf[],
- char *valbuf)
-{
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
+mips_print_fp_register (struct ui_file *file, struct frame_info *frame,
+ int regnum)
+{ /* do values for FP (float) regs */
+ char *raw_buffer;
+ double doub, flt1; /* doubles extracted from raw hex data */
+ int inv1, inv2;
- memcpy (valbuf + lo.buf_offset,
- regbuf + DEPRECATED_REGISTER_BYTE (lo.reg) + lo.reg_offset,
- lo.len);
+ raw_buffer =
+ (char *) alloca (2 *
+ register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->fp0));
- if (hi.len > 0)
- memcpy (valbuf + hi.buf_offset,
- regbuf + DEPRECATED_REGISTER_BYTE (hi.reg) + hi.reg_offset,
- hi.len);
-}
+ fprintf_filtered (file, "%s:", REGISTER_NAME (regnum));
+ fprintf_filtered (file, "%*s", 4 - (int) strlen (REGISTER_NAME (regnum)),
+ "");
-static void
-mips_o64_extract_return_value (struct type *valtype,
- char regbuf[],
- char *valbuf)
-{
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
+ if (register_size (current_gdbarch, regnum) == 4 || mips2_fp_compat ())
+ {
+ /* 4-byte registers: Print hex and floating. Also print even
+ numbered registers as doubles. */
+ mips_read_fp_register_single (frame, regnum, raw_buffer);
+ flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1);
- memcpy (valbuf + lo.buf_offset,
- regbuf + DEPRECATED_REGISTER_BYTE (lo.reg) + lo.reg_offset,
- lo.len);
+ print_scalar_formatted (raw_buffer, builtin_type_uint32, 'x', 'w',
+ file);
- if (hi.len > 0)
- memcpy (valbuf + hi.buf_offset,
- regbuf + DEPRECATED_REGISTER_BYTE (hi.reg) + hi.reg_offset,
- hi.len);
-}
+ fprintf_filtered (file, " flt: ");
+ if (inv1)
+ fprintf_filtered (file, " <invalid float> ");
+ else
+ fprintf_filtered (file, "%-17.9g", flt1);
-/* Given a return value in `valbuf' with a type `valtype', write it's
- value into the appropriate register. */
+ if (regnum % 2 == 0)
+ {
+ mips_read_fp_register_double (frame, regnum, raw_buffer);
+ doub = unpack_double (mips_double_register_type (), raw_buffer,
+ &inv2);
-static void
-mips_eabi_store_return_value (struct type *valtype, char *valbuf)
-{
- char raw_buffer[MAX_REGISTER_SIZE];
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
+ fprintf_filtered (file, " dbl: ");
+ if (inv2)
+ fprintf_filtered (file, "<invalid double>");
+ else
+ fprintf_filtered (file, "%-24.17g", doub);
+ }
+ }
+ else
+ {
+ /* Eight byte registers: print each one as hex, float and double. */
+ mips_read_fp_register_single (frame, regnum, raw_buffer);
+ flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1);
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg), raw_buffer,
- register_size (current_gdbarch, lo.reg));
+ mips_read_fp_register_double (frame, regnum, raw_buffer);
+ doub = unpack_double (mips_double_register_type (), raw_buffer, &inv2);
- if (hi.len > 0)
- {
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg), raw_buffer,
- register_size (current_gdbarch, hi.reg));
+
+ print_scalar_formatted (raw_buffer, builtin_type_uint64, 'x', 'g',
+ file);
+
+ fprintf_filtered (file, " flt: ");
+ if (inv1)
+ fprintf_filtered (file, "<invalid float>");
+ else
+ fprintf_filtered (file, "%-17.9g", flt1);
+
+ fprintf_filtered (file, " dbl: ");
+ if (inv2)
+ fprintf_filtered (file, "<invalid double>");
+ else
+ fprintf_filtered (file, "%-24.17g", doub);
}
}
static void
-mips_o64_store_return_value (struct type *valtype, char *valbuf)
+mips_print_register (struct ui_file *file, struct frame_info *frame,
+ int regnum, int all)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
char raw_buffer[MAX_REGISTER_SIZE];
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
+ int offset;
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg), raw_buffer,
- register_size (current_gdbarch, lo.reg));
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ {
+ mips_print_fp_register (file, frame, regnum);
+ return;
+ }
- if (hi.len > 0)
+ /* Get the data in raw format. */
+ if (!frame_register_read (frame, regnum, raw_buffer))
{
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg), raw_buffer,
- register_size (current_gdbarch, hi.reg));
+ fprintf_filtered (file, "%s: [Invalid]", REGISTER_NAME (regnum));
+ return;
}
+
+ fputs_filtered (REGISTER_NAME (regnum), file);
+
+ /* The problem with printing numeric register names (r26, etc.) is that
+ the user can't use them on input. Probably the best solution is to
+ fix it so that either the numeric or the funky (a2, etc.) names
+ are accepted on input. */
+ if (regnum < MIPS_NUMREGS)
+ fprintf_filtered (file, "(r%d): ", regnum);
+ else
+ fprintf_filtered (file, ": ");
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ offset =
+ register_size (current_gdbarch,
+ regnum) - register_size (current_gdbarch, regnum);
+ else
+ offset = 0;
+
+ print_scalar_formatted (raw_buffer + offset,
+ gdbarch_register_type (gdbarch, regnum), 'x', 0,
+ file);
}
-/* O32 ABI stuff. */
+/* Replacement for generic do_registers_info.
+ Print regs in pretty columns. */
-static enum return_value_convention
-mips_o32_return_value (struct gdbarch *gdbarch, struct type *type,
- struct regcache *regcache,
- void *readbuf, const void *writebuf)
+static int
+print_fp_register_row (struct ui_file *file, struct frame_info *frame,
+ int regnum)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ fprintf_filtered (file, " ");
+ mips_print_fp_register (file, frame, regnum);
+ fprintf_filtered (file, "\n");
+ return regnum + 1;
+}
- if (TYPE_CODE (type)== TYPE_CODE_STRUCT
- || TYPE_CODE (type)== TYPE_CODE_UNION
- || TYPE_CODE (type)== TYPE_CODE_ARRAY)
- return RETURN_VALUE_STRUCT_CONVENTION;
- else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && TYPE_LENGTH (type) == 4
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
- {
- /* A single-precision floating-point value. It fits in the
- least significant part of FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0,
- TYPE_LENGTH (type),
- TARGET_BYTE_ORDER, readbuf, writebuf, 0);
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
- else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && TYPE_LENGTH (type) == 8
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
+
+/* Print a row's worth of GP (int) registers, with name labels above */
+
+static int
+print_gp_register_row (struct ui_file *file, struct frame_info *frame,
+ int start_regnum)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ /* do values for GP (int) regs */
+ char raw_buffer[MAX_REGISTER_SIZE];
+ int ncols = (mips_abi_regsize (gdbarch) == 8 ? 4 : 8); /* display cols per row */
+ int col, byte;
+ int regnum;
+
+ /* For GP registers, we print a separate row of names above the vals */
+ fprintf_filtered (file, " ");
+ for (col = 0, regnum = start_regnum;
+ col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
{
- /* A double-precision floating-point value. The most
- significant part goes in FP1, and the least significant in
- FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp1/$fp0\n");
- switch (TARGET_BYTE_ORDER)
- {
- case BFD_ENDIAN_LITTLE:
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0 + 0,
- 4, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0 + 1,
- 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
- break;
- case BFD_ENDIAN_BIG:
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0 + 1,
- 4, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0 + 0,
- 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
- break;
- default:
- internal_error (__FILE__, __LINE__, "bad switch");
- }
- return RETURN_VALUE_REGISTER_CONVENTION;
+ if (*REGISTER_NAME (regnum) == '\0')
+ continue; /* unused register */
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ TYPE_CODE_FLT)
+ break; /* end the row: reached FP register */
+ fprintf_filtered (file,
+ mips_abi_regsize (current_gdbarch) == 8 ? "%17s" : "%9s",
+ REGISTER_NAME (regnum));
+ col++;
}
-#if 0
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- && TYPE_NFIELDS (type) <= 2
- && TYPE_NFIELDS (type) >= 1
- && ((TYPE_NFIELDS (type) == 1
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT))
- || (TYPE_NFIELDS (type) == 2
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT)
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
- == TYPE_CODE_FLT)))
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ /* print the R0 to R31 names */
+ if ((start_regnum % NUM_REGS) < MIPS_NUMREGS)
+ fprintf_filtered (file, "\n R%-4d", start_regnum % NUM_REGS);
+ else
+ fprintf_filtered (file, "\n ");
+
+ /* now print the values in hex, 4 or 8 to the row */
+ for (col = 0, regnum = start_regnum;
+ col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
{
- /* A struct that contains one or two floats. Each value is part
- in the least significant part of their floating point
- register.. */
- bfd_byte reg[MAX_REGISTER_SIZE];
- int regnum;
- int field;
- for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
- field < TYPE_NFIELDS (type);
- field++, regnum += 2)
- {
- int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
- / TARGET_CHAR_BIT);
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset);
- mips_xfer_register (regcache, NUM_REGS + regnum,
- TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
- TARGET_BYTE_ORDER, readbuf, writebuf, offset);
- }
- return RETURN_VALUE_REGISTER_CONVENTION;
+ if (*REGISTER_NAME (regnum) == '\0')
+ continue; /* unused register */
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ TYPE_CODE_FLT)
+ break; /* end row: reached FP register */
+ /* OK: get the data in raw format. */
+ if (!frame_register_read (frame, regnum, raw_buffer))
+ error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+ /* pad small registers */
+ for (byte = 0;
+ byte < (mips_abi_regsize (current_gdbarch)
+ - register_size (current_gdbarch, regnum)); byte++)
+ printf_filtered (" ");
+ /* Now print the register value in hex, endian order. */
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ for (byte =
+ register_size (current_gdbarch,
+ regnum) - register_size (current_gdbarch, regnum);
+ byte < register_size (current_gdbarch, regnum); byte++)
+ fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
+ else
+ for (byte = register_size (current_gdbarch, regnum) - 1;
+ byte >= 0; byte--)
+ fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
+ fprintf_filtered (file, " ");
+ col++;
}
-#endif
-#if 0
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION)
+ if (col > 0) /* ie. if we actually printed anything... */
+ fprintf_filtered (file, "\n");
+
+ return regnum;
+}
+
+/* MIPS_DO_REGISTERS_INFO(): called by "info register" command */
+
+static void
+mips_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, int regnum, int all)
+{
+ if (regnum != -1) /* do one specified register */
{
- /* A structure or union. Extract the left justified value,
- regardless of the byte order. I.e. DO NOT USE
- mips_xfer_lower. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += register_size (current_gdbarch, regnum), regnum++)
- {
- int xfer = register_size (current_gdbarch, regnum);
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
- BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
- }
- return RETURN_VALUE_REGISTER_CONVENTION;
+ gdb_assert (regnum >= NUM_REGS);
+ if (*(REGISTER_NAME (regnum)) == '\0')
+ error ("Not a valid register for the current processor type");
+
+ mips_print_register (file, frame, regnum, 0);
+ fprintf_filtered (file, "\n");
}
-#endif
else
+ /* do all (or most) registers */
{
- /* A scalar extract each part but least-significant-byte
- justified. o32 thinks registers are 4 byte, regardless of
- the ISA. mips_stack_argsize controls this. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += mips_stack_argsize (), regnum++)
+ regnum = NUM_REGS;
+ while (regnum < NUM_REGS + NUM_PSEUDO_REGS)
{
- int xfer = mips_stack_argsize ();
- int pos = 0;
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
- TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ TYPE_CODE_FLT)
+ {
+ if (all) /* true for "INFO ALL-REGISTERS" command */
+ regnum = print_fp_register_row (file, frame, regnum);
+ else
+ regnum += MIPS_NUMREGS; /* skip floating point regs */
+ }
+ else
+ regnum = print_gp_register_row (file, frame, regnum);
}
- return RETURN_VALUE_REGISTER_CONVENTION;
}
}
-/* N32/N44 ABI stuff. */
+/* Is this a branch with a delay slot? */
-static enum return_value_convention
-mips_n32n64_return_value (struct gdbarch *gdbarch,
- struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
+static int is_delayed (unsigned long);
+
+static int
+is_delayed (unsigned long insn)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- if (TYPE_CODE (type)== TYPE_CODE_STRUCT
- || TYPE_CODE (type)== TYPE_CODE_UNION
- || TYPE_CODE (type)== TYPE_CODE_ARRAY
- || TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE)
- return RETURN_VALUE_STRUCT_CONVENTION;
- else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
- {
- /* A floating-point value belongs in the least significant part
- of FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0,
- TYPE_LENGTH (type),
- TARGET_BYTE_ORDER, readbuf, writebuf, 0);
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- && TYPE_NFIELDS (type) <= 2
- && TYPE_NFIELDS (type) >= 1
- && ((TYPE_NFIELDS (type) == 1
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT))
- || (TYPE_NFIELDS (type) == 2
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT)
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
- == TYPE_CODE_FLT)))
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ int i;
+ for (i = 0; i < NUMOPCODES; ++i)
+ if (mips_opcodes[i].pinfo != INSN_MACRO
+ && (insn & mips_opcodes[i].mask) == mips_opcodes[i].match)
+ break;
+ return (i < NUMOPCODES
+ && (mips_opcodes[i].pinfo & (INSN_UNCOND_BRANCH_DELAY
+ | INSN_COND_BRANCH_DELAY
+ | INSN_COND_BRANCH_LIKELY)));
+}
+
+int
+mips_step_skips_delay (CORE_ADDR pc)
+{
+ char buf[MIPS_INSTLEN];
+
+ /* There is no branch delay slot on MIPS16. */
+ if (pc_is_mips16 (pc))
+ return 0;
+
+ if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0)
+ /* If error reading memory, guess that it is not a delayed branch. */
+ return 0;
+ return is_delayed ((unsigned long)
+ extract_unsigned_integer (buf, MIPS_INSTLEN));
+}
+
+/* Skip the PC past function prologue instructions (32-bit version).
+ This is a helper function for mips_skip_prologue. */
+
+static CORE_ADDR
+mips32_skip_prologue (CORE_ADDR pc)
+{
+ t_inst inst;
+ CORE_ADDR end_pc;
+ int seen_sp_adjust = 0;
+ int load_immediate_bytes = 0;
+
+ /* Find an upper bound on the prologue. */
+ end_pc = skip_prologue_using_sal (pc);
+ if (end_pc == 0)
+ end_pc = pc + 100; /* Magic. */
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (; pc < end_pc; pc += MIPS_INSTLEN)
{
- /* A struct that contains one or two floats. Each value is part
- in the least significant part of their floating point
- register.. */
- bfd_byte reg[MAX_REGISTER_SIZE];
- int regnum;
- int field;
- for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
- field < TYPE_NFIELDS (type);
- field++, regnum += 2)
+ unsigned long high_word;
+
+ inst = mips_fetch_instruction (pc);
+ high_word = (inst >> 16) & 0xffff;
+
+ if (high_word == 0x27bd /* addiu $sp,$sp,offset */
+ || high_word == 0x67bd) /* daddiu $sp,$sp,offset */
+ seen_sp_adjust = 1;
+ else if (inst == 0x03a1e823 || /* subu $sp,$sp,$at */
+ inst == 0x03a8e823) /* subu $sp,$sp,$t0 */
+ seen_sp_adjust = 1;
+ else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */
+ || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */
+ && (inst & 0x001F0000)) /* reg != $zero */
+ continue;
+
+ else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */
+ continue;
+ else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000))
+ /* sx reg,n($s8) */
+ continue; /* reg != $zero */
+
+ /* move $s8,$sp. With different versions of gas this will be either
+ `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'.
+ Accept any one of these. */
+ else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+ continue;
+
+ else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */
+ continue;
+ else if (high_word == 0x3c1c) /* lui $gp,n */
+ continue;
+ else if (high_word == 0x279c) /* addiu $gp,$gp,n */
+ continue;
+ else if (inst == 0x0399e021 /* addu $gp,$gp,$t9 */
+ || inst == 0x033ce021) /* addu $gp,$t9,$gp */
+ continue;
+ /* The following instructions load $at or $t0 with an immediate
+ value in preparation for a stack adjustment via
+ subu $sp,$sp,[$at,$t0]. These instructions could also initialize
+ a local variable, so we accept them only before a stack adjustment
+ instruction was seen. */
+ else if (!seen_sp_adjust)
{
- int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
- / TARGET_CHAR_BIT);
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset);
- mips_xfer_register (regcache, NUM_REGS + regnum,
- TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
- TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ if (high_word == 0x3c01 || /* lui $at,n */
+ high_word == 0x3c08) /* lui $t0,n */
+ {
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+ continue;
+ }
+ else if (high_word == 0x3421 || /* ori $at,$at,n */
+ high_word == 0x3508 || /* ori $t0,$t0,n */
+ high_word == 0x3401 || /* ori $at,$zero,n */
+ high_word == 0x3408) /* ori $t0,$zero,n */
+ {
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+ continue;
+ }
+ else
+ break;
}
- return RETURN_VALUE_REGISTER_CONVENTION;
+ else
+ break;
}
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION)
+
+ /* In a frameless function, we might have incorrectly
+ skipped some load immediate instructions. Undo the skipping
+ if the load immediate was not followed by a stack adjustment. */
+ if (load_immediate_bytes && !seen_sp_adjust)
+ pc -= load_immediate_bytes;
+ return pc;
+}
+
+/* Skip the PC past function prologue instructions (16-bit version).
+ This is a helper function for mips_skip_prologue. */
+
+static CORE_ADDR
+mips16_skip_prologue (CORE_ADDR pc)
+{
+ CORE_ADDR end_pc;
+ int extend_bytes = 0;
+ int prev_extend_bytes;
+
+ /* Table of instructions likely to be found in a function prologue. */
+ static struct
+ {
+ unsigned short inst;
+ unsigned short mask;
+ }
+ table[] =
+ {
+ {
+ 0x6300, 0xff00}
+ , /* addiu $sp,offset */
+ {
+ 0xfb00, 0xff00}
+ , /* daddiu $sp,offset */
+ {
+ 0xd000, 0xf800}
+ , /* sw reg,n($sp) */
{
- /* A structure or union. Extract the left justified value,
- regardless of the byte order. I.e. DO NOT USE
- mips_xfer_lower. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += register_size (current_gdbarch, regnum), regnum++)
+ 0xf900, 0xff00}
+ , /* sd reg,n($sp) */
+ {
+ 0x6200, 0xff00}
+ , /* sw $ra,n($sp) */
+ {
+ 0xfa00, 0xff00}
+ , /* sd $ra,n($sp) */
+ {
+ 0x673d, 0xffff}
+ , /* move $s1,sp */
+ {
+ 0xd980, 0xff80}
+ , /* sw $a0-$a3,n($s1) */
+ {
+ 0x6704, 0xff1c}
+ , /* move reg,$a0-$a3 */
+ {
+ 0xe809, 0xf81f}
+ , /* entry pseudo-op */
+ {
+ 0x0100, 0xff00}
+ , /* addiu $s1,$sp,n */
+ {
+ 0, 0} /* end of table marker */
+ };
+
+ /* Find an upper bound on the prologue. */
+ end_pc = skip_prologue_using_sal (pc);
+ if (end_pc == 0)
+ end_pc = pc + 100; /* Magic. */
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (; pc < end_pc; pc += MIPS16_INSTLEN)
+ {
+ unsigned short inst;
+ int i;
+
+ inst = mips_fetch_instruction (pc);
+
+ /* Normally we ignore an extend instruction. However, if it is
+ not followed by a valid prologue instruction, we must adjust
+ the pc back over the extend so that it won't be considered
+ part of the prologue. */
+ if ((inst & 0xf800) == 0xf000) /* extend */
{
- int xfer = register_size (current_gdbarch, regnum);
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
- BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
+ extend_bytes = MIPS16_INSTLEN;
+ continue;
}
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
- else
- {
- /* A scalar extract each part but least-significant-byte
- justified. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += register_size (current_gdbarch, regnum), regnum++)
+ prev_extend_bytes = extend_bytes;
+ extend_bytes = 0;
+
+ /* Check for other valid prologue instructions besides extend. */
+ for (i = 0; table[i].mask != 0; i++)
+ if ((inst & table[i].mask) == table[i].inst) /* found, get out */
+ break;
+ if (table[i].mask != 0) /* it was in table? */
+ continue; /* ignore it */
+ else
+ /* non-prologue */
{
- int xfer = register_size (current_gdbarch, regnum);
- int pos = 0;
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
- TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ /* Return the current pc, adjusted backwards by 2 if
+ the previous instruction was an extend. */
+ return pc - prev_extend_bytes;
}
- return RETURN_VALUE_REGISTER_CONVENTION;
}
+ return pc;
}
+/* To skip prologues, I use this predicate. Returns either PC itself
+ if the code at PC does not look like a function prologue; otherwise
+ returns an address that (if we're lucky) follows the prologue. If
+ LENIENT, then we must skip everything which is involved in setting
+ up the frame (it's OK to skip more, just so long as we don't skip
+ anything which might clobber the registers which are being saved.
+ We must skip more in the case where part of the prologue is in the
+ delay slot of a non-prologue instruction). */
+
static CORE_ADDR
-mips_extract_struct_value_address (struct regcache *regcache)
+mips_skip_prologue (CORE_ADDR pc)
{
- /* FIXME: This will only work at random. The caller passes the
- struct_return address in V0, but it is not preserved. It may
- still be there, or this may be a random value. */
- LONGEST val;
+ /* See if we can determine the end of the prologue via the symbol table.
+ If so, then return either PC, or the PC after the prologue, whichever
+ is greater. */
- regcache_cooked_read_signed (regcache, V0_REGNUM, &val);
- return val;
-}
+ CORE_ADDR post_prologue_pc = after_prologue (pc, NULL);
-/* Exported procedure: Is PC in the signal trampoline code */
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
-static int
-mips_pc_in_sigtramp (CORE_ADDR pc, char *ignore)
-{
- if (sigtramp_address == 0)
- fixup_sigtramp ();
- return (pc >= sigtramp_address && pc < sigtramp_end);
+ /* Can't determine prologue from the symbol table, need to examine
+ instructions. */
+
+ if (pc_is_mips16 (pc))
+ return mips16_skip_prologue (pc);
+ else
+ return mips32_skip_prologue (pc);
}
/* Root of all "set mips "/"show mips " commands. This will eventually be
static void
set_mips_command (char *args, int from_tty)
{
- printf_unfiltered ("\"set mips\" must be followed by an appropriate subcommand.\n");
+ printf_unfiltered
+ ("\"set mips\" must be followed by an appropriate subcommand.\n");
help_list (setmipscmdlist, "set mips ", all_commands, gdb_stdout);
}
internal_error (__FILE__, __LINE__, "bad switch");
}
if (mips_fpu_type_auto)
- printf_unfiltered ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
- fpu);
+ printf_unfiltered
+ ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
+ fpu);
else
- printf_unfiltered ("The MIPS floating-point coprocessor is assumed to be %s\n",
- fpu);
+ printf_unfiltered
+ ("The MIPS floating-point coprocessor is assumed to be %s\n", fpu);
}
static void
set_mipsfpu_command (char *args, int from_tty)
{
- printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
+ printf_unfiltered
+ ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
show_mipsfpu_command (args, from_tty);
}
static void
set_mipsfpu_single_command (char *args, int from_tty)
{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
mips_fpu_type = MIPS_FPU_SINGLE;
mips_fpu_type_auto = 0;
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_SINGLE;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "set mipsfpu failed");
}
static void
set_mipsfpu_double_command (char *args, int from_tty)
{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
mips_fpu_type = MIPS_FPU_DOUBLE;
mips_fpu_type_auto = 0;
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_DOUBLE;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "set mipsfpu failed");
}
static void
set_mipsfpu_none_command (char *args, int from_tty)
{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
mips_fpu_type = MIPS_FPU_NONE;
mips_fpu_type_auto = 0;
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_NONE;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "set mipsfpu failed");
}
static void
if (proc_desc)
{
if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
- info->mach = bfd_mach_mips16;
+ info->mach = bfd_mach_mips16;
}
else
{
if (pc_is_mips16 (memaddr))
- info->mach = bfd_mach_mips16;
- }
+ info->mach = bfd_mach_mips16;
+ }
/* Round down the instruction address to the appropriate boundary. */
memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3);
/* Set the disassembler options. */
- if (tdep->mips_abi == MIPS_ABI_N32
- || tdep->mips_abi == MIPS_ABI_N64)
+ if (tdep->mips_abi == MIPS_ABI_N32 || tdep->mips_abi == MIPS_ABI_N64)
{
/* Set up the disassembler info, so that we get the right
- register names from libopcodes. */
+ register names from libopcodes. */
if (tdep->mips_abi == MIPS_ABI_N32)
info->disassembler_options = "gpr-names=n32";
else
breakpoint should be inserted. */
static const unsigned char *
-mips_breakpoint_from_pc (CORE_ADDR * pcptr, int *lenptr)
+mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
{
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
if (pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_big_breakpoint[] = {0xe8, 0xa5};
+ static unsigned char mips16_big_breakpoint[] = { 0xe8, 0xa5 };
*pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_big_breakpoint);
return mips16_big_breakpoint;
/* The IDT board uses an unusual breakpoint value, and
sometimes gets confused when it sees the usual MIPS
breakpoint instruction. */
- static unsigned char big_breakpoint[] = {0, 0x5, 0, 0xd};
- static unsigned char pmon_big_breakpoint[] = {0, 0, 0, 0xd};
- static unsigned char idt_big_breakpoint[] = {0, 0, 0x0a, 0xd};
+ static unsigned char big_breakpoint[] = { 0, 0x5, 0, 0xd };
+ static unsigned char pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
+ static unsigned char idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
*lenptr = sizeof (big_breakpoint);
{
if (pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_little_breakpoint[] = {0xa5, 0xe8};
+ static unsigned char mips16_little_breakpoint[] = { 0xa5, 0xe8 };
*pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_little_breakpoint);
return mips16_little_breakpoint;
}
else
{
- static unsigned char little_breakpoint[] = {0xd, 0, 0x5, 0};
- static unsigned char pmon_little_breakpoint[] = {0xd, 0, 0, 0};
- static unsigned char idt_little_breakpoint[] = {0xd, 0x0a, 0, 0};
+ static unsigned char little_breakpoint[] = { 0xd, 0, 0x5, 0 };
+ static unsigned char pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
+ static unsigned char idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
*lenptr = sizeof (little_breakpoint);
int i;
/* See if the name of the target function is __fn_stub_*. */
- if (find_pc_partial_function (target_pc, &name, NULL, NULL) == 0)
+ if (find_pc_partial_function (target_pc, &name, NULL, NULL) ==
+ 0)
return target_pc;
if (strncmp (name, "__fn_stub_", 10) != 0
&& strcmp (name, "etext") != 0
/* Find the starting address of the function containing the PC. If the
caller didn't give us a name, look it up at the same time. */
- if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == 0)
+ if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) ==
+ 0)
return 0;
if (strncmp (name, "__mips16_call_stub_", 19) == 0)
/* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
i.e. after the jal instruction, this is effectively a return stub. */
if (strncmp (name, "__mips16_call_stub_", 19) == 0
- && (name[19] == 's' || name[19] == 'd')
- && pc != start_addr)
+ && (name[19] == 's' || name[19] == 'd') && pc != start_addr)
return 1;
return 0; /* not a stub */
}
-/* Return non-zero if the PC is in a library helper function that should
- be ignored. This implements the IGNORE_HELPER_CALL macro. */
+/* Return non-zero if the PC is in a library helper function that
+ should be ignored. This implements the
+ DEPRECATED_IGNORE_HELPER_CALL macro. */
int
mips_ignore_helper (CORE_ADDR pc)
}
-/* When debugging a 64 MIPS target running a 32 bit ABI, the size of
- the register stored on the stack (32) is different to its real raw
- size (64). The below ensures that registers are fetched from the
- stack using their ABI size and then stored into the RAW_BUFFER
- using their raw size.
-
- The alternative to adding this function would be to add an ABI
- macro - REGISTER_STACK_SIZE(). */
-
-static void
-mips_get_saved_register (char *raw_buffer,
- int *optimizedp,
- CORE_ADDR *addrp,
- struct frame_info *frame,
- int regnum,
- enum lval_type *lvalp)
-{
- CORE_ADDR addrx;
- enum lval_type lvalx;
- int optimizedx;
- int realnumx;
-
- /* Always a pseudo. */
- gdb_assert (regnum >= NUM_REGS);
-
- /* Make certain that all needed parameters are present. */
- if (addrp == NULL)
- addrp = &addrx;
- if (lvalp == NULL)
- lvalp = &lvalx;
- if (optimizedp == NULL)
- optimizedp = &optimizedx;
-
- if ((regnum % NUM_REGS) == SP_REGNUM)
- /* The SP_REGNUM is special, its value is stored in saved_regs.
- In fact, it is so special that it can even only be fetched
- using a raw register number! Once this code as been converted
- to frame-unwind the problem goes away. */
- frame_register_unwind (deprecated_get_next_frame_hack (frame),
- regnum % NUM_REGS, optimizedp, lvalp, addrp,
- &realnumx, raw_buffer);
- else
- /* Get it from the next frame. */
- frame_register_unwind (deprecated_get_next_frame_hack (frame),
- regnum, optimizedp, lvalp, addrp,
- &realnumx, raw_buffer);
-}
-
-/* Immediately after a function call, return the saved pc.
- Can't always go through the frames for this because on some machines
- the new frame is not set up until the new function executes
- some instructions. */
-
-static CORE_ADDR
-mips_saved_pc_after_call (struct frame_info *frame)
-{
- return read_signed_register (RA_REGNUM);
-}
-
-
/* Convert a dbx stab register number (from `r' declaration) to a GDB
[1 * NUM_REGS .. 2 * NUM_REGS) REGNUM. */
&& REGISTER_NAME (NUM_REGS + regnum)[0] != '\0')
return regnum;
else
- return LEGACY_SIM_REGNO_IGNORE;
+ return LEGACY_SIM_REGNO_IGNORE;
}
if (mips_abi_strings[i] == mips_abi_string)
return (enum mips_abi) i;
- internal_error (__FILE__, __LINE__,
- "unknown ABI string");
+ internal_error (__FILE__, __LINE__, "unknown ABI string");
}
static struct gdbarch *
-mips_gdbarch_init (struct gdbarch_info info,
- struct gdbarch_list *arches)
+mips_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
int elf_flags;
enum mips_abi mips_abi, found_abi, wanted_abi;
int num_regs;
+ enum mips_fpu_type fpu_type;
- elf_flags = 0;
-
- if (info.abfd)
- {
- /* First of all, extract the elf_flags, if available. */
- if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
- elf_flags = elf_elfheader (info.abfd)->e_flags;
- }
+ /* First of all, extract the elf_flags, if available. */
+ if (info.abfd && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
+ elf_flags = elf_elfheader (info.abfd)->e_flags;
+ else if (arches != NULL)
+ elf_flags = gdbarch_tdep (arches->gdbarch)->elf_flags;
+ else
+ elf_flags = 0;
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: elf_flags = 0x%08x\n", elf_flags);
/* Check ELF_FLAGS to see if it specifies the ABI being used. */
switch ((elf_flags & EF_MIPS_ABI))
{
case E_MIPS_ABI_O32:
- mips_abi = MIPS_ABI_O32;
+ found_abi = MIPS_ABI_O32;
break;
case E_MIPS_ABI_O64:
- mips_abi = MIPS_ABI_O64;
+ found_abi = MIPS_ABI_O64;
break;
case E_MIPS_ABI_EABI32:
- mips_abi = MIPS_ABI_EABI32;
+ found_abi = MIPS_ABI_EABI32;
break;
case E_MIPS_ABI_EABI64:
- mips_abi = MIPS_ABI_EABI64;
+ found_abi = MIPS_ABI_EABI64;
break;
default:
if ((elf_flags & EF_MIPS_ABI2))
- mips_abi = MIPS_ABI_N32;
+ found_abi = MIPS_ABI_N32;
else
- mips_abi = MIPS_ABI_UNKNOWN;
+ found_abi = MIPS_ABI_UNKNOWN;
break;
}
/* GCC creates a pseudo-section whose name describes the ABI. */
- if (mips_abi == MIPS_ABI_UNKNOWN && info.abfd != NULL)
- bfd_map_over_sections (info.abfd, mips_find_abi_section, &mips_abi);
+ if (found_abi == MIPS_ABI_UNKNOWN && info.abfd != NULL)
+ bfd_map_over_sections (info.abfd, mips_find_abi_section, &found_abi);
- /* If we have no bfd, then mips_abi will still be MIPS_ABI_UNKNOWN.
- Use the ABI from the last architecture if there is one. */
- if (info.abfd == NULL && arches != NULL)
- mips_abi = gdbarch_tdep (arches->gdbarch)->found_abi;
+ /* If we have no useful BFD information, use the ABI from the last
+ MIPS architecture (if there is one). */
+ if (found_abi == MIPS_ABI_UNKNOWN && info.abfd == NULL && arches != NULL)
+ found_abi = gdbarch_tdep (arches->gdbarch)->found_abi;
/* Try the architecture for any hint of the correct ABI. */
- if (mips_abi == MIPS_ABI_UNKNOWN
+ if (found_abi == MIPS_ABI_UNKNOWN
&& info.bfd_arch_info != NULL
&& info.bfd_arch_info->arch == bfd_arch_mips)
{
switch (info.bfd_arch_info->mach)
{
case bfd_mach_mips3900:
- mips_abi = MIPS_ABI_EABI32;
+ found_abi = MIPS_ABI_EABI32;
break;
case bfd_mach_mips4100:
case bfd_mach_mips5000:
- mips_abi = MIPS_ABI_EABI64;
+ found_abi = MIPS_ABI_EABI64;
break;
case bfd_mach_mips8000:
case bfd_mach_mips10000:
on IRIX. (Even for executables created by gcc.) */
if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour
&& elf_elfheader (info.abfd)->e_ident[EI_CLASS] == ELFCLASS64)
- mips_abi = MIPS_ABI_N64;
+ found_abi = MIPS_ABI_N64;
else
- mips_abi = MIPS_ABI_N32;
+ found_abi = MIPS_ABI_N32;
break;
}
}
- if (mips_abi == MIPS_ABI_UNKNOWN)
- mips_abi = MIPS_ABI_O32;
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "mips_gdbarch_init: found_abi = %d\n",
+ found_abi);
+
+ /* What has the user specified from the command line? */
+ wanted_abi = global_mips_abi ();
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "mips_gdbarch_init: wanted_abi = %d\n",
+ wanted_abi);
/* Now that we have found what the ABI for this binary would be,
check whether the user is overriding it. */
- found_abi = mips_abi;
- wanted_abi = global_mips_abi ();
if (wanted_abi != MIPS_ABI_UNKNOWN)
mips_abi = wanted_abi;
+ else if (found_abi != MIPS_ABI_UNKNOWN)
+ mips_abi = found_abi;
+ else
+ mips_abi = MIPS_ABI_O32;
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "mips_gdbarch_init: mips_abi = %d\n",
+ mips_abi);
+ /* Also used when doing an architecture lookup. */
if (gdbarch_debug)
- {
- fprintf_unfiltered (gdb_stdlog,
- "mips_gdbarch_init: elf_flags = 0x%08x\n",
- elf_flags);
- fprintf_unfiltered (gdb_stdlog,
- "mips_gdbarch_init: mips_abi = %d\n",
- mips_abi);
- fprintf_unfiltered (gdb_stdlog,
- "mips_gdbarch_init: found_mips_abi = %d\n",
- found_abi);
- }
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: mips64_transfers_32bit_regs_p = %d\n",
+ mips64_transfers_32bit_regs_p);
+
+ /* Determine the MIPS FPU type. */
+ if (!mips_fpu_type_auto)
+ fpu_type = mips_fpu_type;
+ else if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips)
+ switch (info.bfd_arch_info->mach)
+ {
+ case bfd_mach_mips3900:
+ case bfd_mach_mips4100:
+ case bfd_mach_mips4111:
+ case bfd_mach_mips4120:
+ fpu_type = MIPS_FPU_NONE;
+ break;
+ case bfd_mach_mips4650:
+ fpu_type = MIPS_FPU_SINGLE;
+ break;
+ default:
+ fpu_type = MIPS_FPU_DOUBLE;
+ break;
+ }
+ else if (arches != NULL)
+ fpu_type = gdbarch_tdep (arches->gdbarch)->mips_fpu_type;
+ else
+ fpu_type = MIPS_FPU_DOUBLE;
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: fpu_type = %d\n", fpu_type);
/* try to find a pre-existing architecture */
for (arches = gdbarch_list_lookup_by_info (arches, &info);
if (gdbarch_tdep (arches->gdbarch)->mips64_transfers_32bit_regs_p
!= mips64_transfers_32bit_regs_p)
continue;
+ /* Be pedantic about which FPU is selected. */
+ if (gdbarch_tdep (arches->gdbarch)->mips_fpu_type != fpu_type)
+ continue;
return arches->gdbarch;
}
gdbarch = gdbarch_alloc (&info, tdep);
tdep->elf_flags = elf_flags;
tdep->mips64_transfers_32bit_regs_p = mips64_transfers_32bit_regs_p;
+ tdep->found_abi = found_abi;
+ tdep->mips_abi = mips_abi;
+ tdep->mips_fpu_type = fpu_type;
/* Initially set everything according to the default ABI/ISA. */
set_gdbarch_short_bit (gdbarch, 16);
set_gdbarch_register_reggroup_p (gdbarch, mips_register_reggroup_p);
set_gdbarch_pseudo_register_read (gdbarch, mips_pseudo_register_read);
set_gdbarch_pseudo_register_write (gdbarch, mips_pseudo_register_write);
- tdep->found_abi = found_abi;
- tdep->mips_abi = mips_abi;
- set_gdbarch_elf_make_msymbol_special (gdbarch,
+ set_gdbarch_elf_make_msymbol_special (gdbarch,
mips_elf_make_msymbol_special);
- /* Fill in the OS dependant register numbers. */
+ /* Fill in the OS dependant register numbers and names. */
{
+ const char **reg_names;
struct mips_regnum *regnum = GDBARCH_OBSTACK_ZALLOC (gdbarch,
struct mips_regnum);
- tdep->regnum = regnum;
if (info.osabi == GDB_OSABI_IRIX)
{
regnum->fp0 = 32;
regnum->fp_control_status = 69;
regnum->fp_implementation_revision = 70;
num_regs = 71;
+ reg_names = mips_irix_reg_names;
}
else
{
regnum->fp_control_status = 70;
regnum->fp_implementation_revision = 71;
num_regs = 90;
+ if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->mach == bfd_mach_mips3900)
+ reg_names = mips_tx39_reg_names;
+ else
+ reg_names = mips_generic_reg_names;
}
/* FIXME: cagney/2003-11-15: For MIPS, hasn't PC_REGNUM been
replaced by read_pc? */
- set_gdbarch_pc_regnum (gdbarch, regnum->pc);
+ set_gdbarch_pc_regnum (gdbarch, regnum->pc + num_regs);
+ set_gdbarch_sp_regnum (gdbarch, MIPS_SP_REGNUM + num_regs);
set_gdbarch_fp0_regnum (gdbarch, regnum->fp0);
set_gdbarch_num_regs (gdbarch, num_regs);
set_gdbarch_num_pseudo_regs (gdbarch, num_regs);
+ set_gdbarch_register_name (gdbarch, mips_register_name);
+ tdep->mips_processor_reg_names = reg_names;
+ tdep->regnum = regnum;
}
switch (mips_abi)
case MIPS_ABI_O32:
set_gdbarch_push_dummy_call (gdbarch, mips_o32_push_dummy_call);
set_gdbarch_return_value (gdbarch, mips_o32_return_value);
- tdep->mips_default_saved_regsize = 4;
- tdep->mips_default_stack_argsize = 4;
- tdep->mips_fp_register_double = 0;
tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 4 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_deprecated_reg_struct_has_addr
- (gdbarch, mips_o32_reg_struct_has_addr);
break;
case MIPS_ABI_O64:
set_gdbarch_push_dummy_call (gdbarch, mips_o64_push_dummy_call);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_o64_store_return_value);
- set_gdbarch_deprecated_extract_return_value (gdbarch, mips_o64_extract_return_value);
- tdep->mips_default_saved_regsize = 8;
- tdep->mips_default_stack_argsize = 8;
- tdep->mips_fp_register_double = 1;
+ set_gdbarch_deprecated_store_return_value (gdbarch,
+ mips_o64_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch,
+ mips_o64_extract_return_value);
tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 4 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_deprecated_reg_struct_has_addr
- (gdbarch, mips_o32_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch, always_use_struct_convention);
+ set_gdbarch_deprecated_use_struct_convention (gdbarch, always_use_struct_convention);
break;
case MIPS_ABI_EABI32:
set_gdbarch_push_dummy_call (gdbarch, mips_eabi_push_dummy_call);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value);
- set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value);
- tdep->mips_default_saved_regsize = 4;
- tdep->mips_default_stack_argsize = 4;
- tdep->mips_fp_register_double = 0;
+ set_gdbarch_deprecated_store_return_value (gdbarch,
+ mips_eabi_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch,
+ mips_eabi_extract_return_value);
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_long_bit (gdbarch, 64);
set_gdbarch_deprecated_reg_struct_has_addr
(gdbarch, mips_eabi_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch,
- mips_eabi_use_struct_convention);
+ set_gdbarch_deprecated_use_struct_convention (gdbarch, mips_eabi_use_struct_convention);
break;
case MIPS_ABI_EABI64:
set_gdbarch_push_dummy_call (gdbarch, mips_eabi_push_dummy_call);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value);
- set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value);
- tdep->mips_default_saved_regsize = 8;
- tdep->mips_default_stack_argsize = 8;
- tdep->mips_fp_register_double = 1;
+ set_gdbarch_deprecated_store_return_value (gdbarch,
+ mips_eabi_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch,
+ mips_eabi_extract_return_value);
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_long_bit (gdbarch, 64);
set_gdbarch_deprecated_reg_struct_has_addr
(gdbarch, mips_eabi_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch,
- mips_eabi_use_struct_convention);
+ set_gdbarch_deprecated_use_struct_convention (gdbarch, mips_eabi_use_struct_convention);
break;
case MIPS_ABI_N32:
set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
set_gdbarch_return_value (gdbarch, mips_n32n64_return_value);
- tdep->mips_default_saved_regsize = 8;
- tdep->mips_default_stack_argsize = 8;
- tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_deprecated_reg_struct_has_addr
- (gdbarch, mips_n32n64_reg_struct_has_addr);
+ set_gdbarch_long_double_bit (gdbarch, 128);
+ set_gdbarch_long_double_format (gdbarch,
+ &floatformat_n32n64_long_double_big);
break;
case MIPS_ABI_N64:
set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
set_gdbarch_return_value (gdbarch, mips_n32n64_return_value);
- tdep->mips_default_saved_regsize = 8;
- tdep->mips_default_stack_argsize = 8;
- tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 64);
set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_deprecated_reg_struct_has_addr
- (gdbarch, mips_n32n64_reg_struct_has_addr);
+ set_gdbarch_long_double_bit (gdbarch, 128);
+ set_gdbarch_long_double_format (gdbarch,
+ &floatformat_n32n64_long_double_big);
break;
default:
- internal_error (__FILE__, __LINE__,
- "unknown ABI in switch");
+ internal_error (__FILE__, __LINE__, "unknown ABI in switch");
}
/* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE
the current gcc - it would make GDB treat these 64-bit programs
as 32-bit programs by default. */
- /* enable/disable the MIPS FPU */
- if (!mips_fpu_type_auto)
- tdep->mips_fpu_type = mips_fpu_type;
- else if (info.bfd_arch_info != NULL
- && info.bfd_arch_info->arch == bfd_arch_mips)
- switch (info.bfd_arch_info->mach)
- {
- case bfd_mach_mips3900:
- case bfd_mach_mips4100:
- case bfd_mach_mips4111:
- tdep->mips_fpu_type = MIPS_FPU_NONE;
- break;
- case bfd_mach_mips4650:
- tdep->mips_fpu_type = MIPS_FPU_SINGLE;
- break;
- default:
- tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
- break;
- }
- else
- tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
-
- /* MIPS version of register names. */
- set_gdbarch_register_name (gdbarch, mips_register_name);
- if (info.osabi == GDB_OSABI_IRIX)
- tdep->mips_processor_reg_names = mips_irix_reg_names;
- else if (info.bfd_arch_info != NULL && info.bfd_arch_info->mach == bfd_mach_mips3900)
- tdep->mips_processor_reg_names = mips_tx39_reg_names;
- else
- tdep->mips_processor_reg_names = mips_generic_reg_names;
set_gdbarch_read_pc (gdbarch, mips_read_pc);
- set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
- set_gdbarch_deprecated_target_read_fp (gdbarch, mips_read_sp); /* Draft FRAME base. */
+ set_gdbarch_write_pc (gdbarch, mips_write_pc);
set_gdbarch_read_sp (gdbarch, mips_read_sp);
/* Add/remove bits from an address. The MIPS needs be careful to
ensure that all 32 bit addresses are sign extended to 64 bits. */
set_gdbarch_addr_bits_remove (gdbarch, mips_addr_bits_remove);
- /* There's a mess in stack frame creation. See comments in
- blockframe.c near reference to DEPRECATED_INIT_FRAME_PC_FIRST. */
- set_gdbarch_deprecated_init_frame_pc_first (gdbarch, mips_init_frame_pc_first);
+ /* Unwind the frame. */
+ set_gdbarch_unwind_pc (gdbarch, mips_unwind_pc);
+ set_gdbarch_unwind_dummy_id (gdbarch, mips_unwind_dummy_id);
/* Map debug register numbers onto internal register numbers. */
set_gdbarch_stab_reg_to_regnum (gdbarch, mips_stab_reg_to_regnum);
- set_gdbarch_ecoff_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
- set_gdbarch_dwarf_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
- set_gdbarch_dwarf2_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch,
+ mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch,
+ mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch,
+ mips_dwarf_dwarf2_ecoff_reg_to_regnum);
set_gdbarch_register_sim_regno (gdbarch, mips_register_sim_regno);
- /* Initialize a frame */
- set_gdbarch_deprecated_frame_init_saved_regs (gdbarch, mips_find_saved_regs);
- set_gdbarch_deprecated_init_extra_frame_info (gdbarch, mips_init_extra_frame_info);
-
/* MIPS version of CALL_DUMMY */
/* NOTE: cagney/2003-08-05: Eventually call dummy location will be
replaced by a command, and all targets will default to on stack
(regardless of the stack's execute status). */
set_gdbarch_call_dummy_location (gdbarch, AT_SYMBOL);
- set_gdbarch_deprecated_pop_frame (gdbarch, mips_pop_frame);
set_gdbarch_frame_align (gdbarch, mips_frame_align);
- set_gdbarch_deprecated_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
- set_gdbarch_deprecated_register_convertible (gdbarch, mips_register_convertible);
- set_gdbarch_deprecated_register_convert_to_virtual (gdbarch, mips_register_convert_to_virtual);
- set_gdbarch_deprecated_register_convert_to_raw (gdbarch, mips_register_convert_to_raw);
-
- set_gdbarch_deprecated_frame_chain (gdbarch, mips_frame_chain);
- set_gdbarch_frameless_function_invocation (gdbarch,
- generic_frameless_function_invocation_not);
- set_gdbarch_deprecated_frame_saved_pc (gdbarch, mips_frame_saved_pc);
- set_gdbarch_frame_args_skip (gdbarch, 0);
- set_gdbarch_deprecated_get_saved_register (gdbarch, mips_get_saved_register);
+ set_gdbarch_convert_register_p (gdbarch, mips_convert_register_p);
+ set_gdbarch_register_to_value (gdbarch, mips_register_to_value);
+ set_gdbarch_value_to_register (gdbarch, mips_value_to_register);
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_breakpoint_from_pc (gdbarch, mips_breakpoint_from_pc);
- set_gdbarch_decr_pc_after_break (gdbarch, 0);
set_gdbarch_skip_prologue (gdbarch, mips_skip_prologue);
- set_gdbarch_deprecated_saved_pc_after_call (gdbarch, mips_saved_pc_after_call);
set_gdbarch_pointer_to_address (gdbarch, signed_pointer_to_address);
set_gdbarch_address_to_pointer (gdbarch, address_to_signed_pointer);
set_gdbarch_integer_to_address (gdbarch, mips_integer_to_address);
- set_gdbarch_function_start_offset (gdbarch, 0);
-
set_gdbarch_register_type (gdbarch, mips_register_type);
set_gdbarch_print_registers_info (gdbarch, mips_print_registers_info);
- set_gdbarch_pc_in_sigtramp (gdbarch, mips_pc_in_sigtramp);
set_gdbarch_print_insn (gdbarch, gdb_print_insn_mips);
is sitting on? */
set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1);
+ set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_stub);
+
+ /* NOTE drow/2004-02-11: We overload the core solib trampoline code
+ to support MIPS16. This is a bad thing. Make sure not to do it
+ if we have an OS ABI that actually supports shared libraries, since
+ shared library support is more important. If we have an OS someday
+ that supports both shared libraries and MIPS16, we'll have to find
+ a better place for these. */
+ if (info.osabi == GDB_OSABI_UNKNOWN)
+ {
+ set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub);
+ set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_return_stub);
+ }
+
/* Hook in OS ABI-specific overrides, if they have been registered. */
gdbarch_init_osabi (info, gdbarch);
- set_gdbarch_extract_struct_value_address (gdbarch,
- mips_extract_struct_value_address);
-
- set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_stub);
-
- set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub);
- set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_return_stub);
+ /* Unwind the frame. */
+ frame_unwind_append_sniffer (gdbarch, mips_stub_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, mips_mdebug_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, mips_insn16_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, mips_insn32_frame_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_stub_frame_base_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_mdebug_frame_base_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_insn16_frame_base_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_insn32_frame_base_sniffer);
return gdbarch;
}
static void
-mips_abi_update (char *ignore_args, int from_tty,
- struct cmd_list_element *c)
+mips_abi_update (char *ignore_args, int from_tty, struct cmd_list_element *c)
{
struct gdbarch_info info;
show_mips_abi (char *ignore_args, int from_tty)
{
if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_mips)
- printf_filtered (
- "The MIPS ABI is unknown because the current architecture is not MIPS.\n");
+ printf_filtered
+ ("The MIPS ABI is unknown because the current architecture is not MIPS.\n");
else
{
enum mips_abi global_abi = global_mips_abi ();
const char *actual_abi_str = mips_abi_strings[actual_abi];
if (global_abi == MIPS_ABI_UNKNOWN)
- printf_filtered ("The MIPS ABI is set automatically (currently \"%s\").\n",
- actual_abi_str);
+ printf_filtered
+ ("The MIPS ABI is set automatically (currently \"%s\").\n",
+ actual_abi_str);
else if (global_abi == actual_abi)
- printf_filtered (
- "The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
- actual_abi_str);
+ printf_filtered
+ ("The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
+ actual_abi_str);
else
{
/* Probably shouldn't happen... */
- printf_filtered (
- "The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
- actual_abi_str,
- mips_abi_strings[global_abi]);
+ printf_filtered
+ ("The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
+ actual_abi_str, mips_abi_strings[global_abi]);
}
}
}
ef_mips_arch);
fprintf_unfiltered (file,
"mips_dump_tdep: tdep->mips_abi = %d (%s)\n",
- tdep->mips_abi,
- mips_abi_strings[tdep->mips_abi]);
+ tdep->mips_abi, mips_abi_strings[tdep->mips_abi]);
fprintf_unfiltered (file,
"mips_dump_tdep: mips_mask_address_p() %d (default %d)\n",
- mips_mask_address_p (),
+ mips_mask_address_p (tdep),
tdep->default_mask_address_p);
}
- fprintf_unfiltered (file,
- "mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
- FP_REGISTER_DOUBLE);
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_DEFAULT_FPU_TYPE = %d (%s)\n",
MIPS_DEFAULT_FPU_TYPE,
: MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_SINGLE ? "single"
: MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_DOUBLE ? "double"
: "???"));
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_EABI = %d\n",
- MIPS_EABI);
+ fprintf_unfiltered (file, "mips_dump_tdep: MIPS_EABI = %d\n", MIPS_EABI);
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_FPU_TYPE = %d (%s)\n",
MIPS_FPU_TYPE,
: MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? "double"
: "???"));
fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_DEFAULT_SAVED_REGSIZE = %d\n",
- MIPS_DEFAULT_SAVED_REGSIZE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
- FP_REGISTER_DOUBLE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_DEFAULT_STACK_ARGSIZE = %d\n",
- MIPS_DEFAULT_STACK_ARGSIZE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_STACK_ARGSIZE = %d\n",
- MIPS_STACK_ARGSIZE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: A0_REGNUM = %d\n",
- A0_REGNUM);
+ "mips_dump_tdep: mips_stack_argsize() = %d\n",
+ mips_stack_argsize (current_gdbarch));
+ fprintf_unfiltered (file, "mips_dump_tdep: A0_REGNUM = %d\n", A0_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: ADDR_BITS_REMOVE # %s\n",
- XSTRING (ADDR_BITS_REMOVE(ADDR)));
+ XSTRING (ADDR_BITS_REMOVE (ADDR)));
fprintf_unfiltered (file,
"mips_dump_tdep: ATTACH_DETACH # %s\n",
XSTRING (ATTACH_DETACH));
"mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n",
FIRST_EMBED_REGNUM);
fprintf_unfiltered (file,
- "mips_dump_tdep: IGNORE_HELPER_CALL # %s\n",
- XSTRING (IGNORE_HELPER_CALL (PC)));
+ "mips_dump_tdep: DEPRECATED_IGNORE_HELPER_CALL # %s\n",
+ XSTRING (DEPRECATED_IGNORE_HELPER_CALL (PC)));
fprintf_unfiltered (file,
"mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n",
XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME)));
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS16_INSTLEN = %d\n",
MIPS16_INSTLEN);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_EFI_SYMBOL_NAME = multi-arch!!\n");
fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_INSTLEN = %d\n",
- MIPS_INSTLEN);
+ "mips_dump_tdep: MIPS_INSTLEN = %d\n", MIPS_INSTLEN);
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_LAST_ARG_REGNUM = %d (%d regs)\n",
MIPS_LAST_ARG_REGNUM,
MIPS_LAST_ARG_REGNUM - A0_REGNUM + 1);
fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_NUMREGS = %d\n",
- MIPS_NUMREGS);
+ "mips_dump_tdep: MIPS_NUMREGS = %d\n", MIPS_NUMREGS);
fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_SAVED_REGSIZE = %d\n",
- MIPS_SAVED_REGSIZE);
+ "mips_dump_tdep: mips_abi_regsize() = %d\n",
+ mips_abi_regsize (current_gdbarch));
fprintf_unfiltered (file,
- "mips_dump_tdep: PRID_REGNUM = %d\n",
- PRID_REGNUM);
+ "mips_dump_tdep: PRID_REGNUM = %d\n", PRID_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: PROC_DESC_IS_DUMMY = function?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: PROC_FRAME_ADJUST = function?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: PROC_FRAME_OFFSET = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FRAME_REG = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FREG_MASK = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_PC_REG = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_REG_MASK = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_SYMBOL = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PS_REGNUM = %d\n",
- PS_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: RA_REGNUM = %d\n",
- RA_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_FRAME_REG = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_MASK = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_PC_REG = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_MASK = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_SYMBOL = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PS_REGNUM = %d\n", PS_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: RA_REGNUM = %d\n", RA_REGNUM);
#ifdef SAVED_BYTES
fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_BYTES = %d\n",
- SAVED_BYTES);
+ "mips_dump_tdep: SAVED_BYTES = %d\n", SAVED_BYTES);
#endif
#ifdef SAVED_FP
- fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_FP = %d\n",
- SAVED_FP);
+ fprintf_unfiltered (file, "mips_dump_tdep: SAVED_FP = %d\n", SAVED_FP);
#endif
#ifdef SAVED_PC
- fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_PC = %d\n",
- SAVED_PC);
+ fprintf_unfiltered (file, "mips_dump_tdep: SAVED_PC = %d\n", SAVED_PC);
#endif
fprintf_unfiltered (file,
"mips_dump_tdep: SETUP_ARBITRARY_FRAME # %s\n",
XSTRING (SETUP_ARBITRARY_FRAME (NUMARGS, ARGS)));
fprintf_unfiltered (file,
"mips_dump_tdep: SET_PROC_DESC_IS_DUMMY = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_BASE = %d\n",
- SIGFRAME_BASE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_FPREGSAVE_OFF = %d\n",
- SIGFRAME_FPREGSAVE_OFF);
- fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_PC_OFF = %d\n",
- SIGFRAME_PC_OFF);
- fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_REGSAVE_OFF = %d\n",
- SIGFRAME_REGSAVE_OFF);
- fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_REG_SIZE = %d\n",
- SIGFRAME_REG_SIZE);
fprintf_unfiltered (file,
"mips_dump_tdep: SKIP_TRAMPOLINE_CODE # %s\n",
XSTRING (SKIP_TRAMPOLINE_CODE (PC)));
fprintf_unfiltered (file,
"mips_dump_tdep: STOPPED_BY_WATCHPOINT # %s\n",
XSTRING (STOPPED_BY_WATCHPOINT (WS)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: T9_REGNUM = %d\n",
- T9_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: T9_REGNUM = %d\n", T9_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: TABULAR_REGISTER_OUTPUT = used?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: TARGET_CAN_USE_HARDWARE_WATCHPOINT # %s\n",
- XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT (TYPE,CNT,OTHERTYPE)));
+ XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT
+ (TYPE, CNT, OTHERTYPE)));
fprintf_unfiltered (file,
"mips_dump_tdep: TARGET_HAS_HARDWARE_WATCHPOINTS # %s\n",
XSTRING (TARGET_HAS_HARDWARE_WATCHPOINTS));
#endif
#ifdef TRACE_FLAVOR
fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_FLAVOR = %d\n",
- TRACE_FLAVOR);
+ "mips_dump_tdep: TRACE_FLAVOR = %d\n", TRACE_FLAVOR);
#endif
#ifdef TRACE_FLAVOR_SIZE
fprintf_unfiltered (file,
#ifdef TRACE_SET
fprintf_unfiltered (file,
"mips_dump_tdep: TRACE_SET # %s\n",
- XSTRING (TRACE_SET (X,STATE)));
+ XSTRING (TRACE_SET (X, STATE)));
#endif
#ifdef UNUSED_REGNUM
fprintf_unfiltered (file,
- "mips_dump_tdep: UNUSED_REGNUM = %d\n",
- UNUSED_REGNUM);
+ "mips_dump_tdep: UNUSED_REGNUM = %d\n", UNUSED_REGNUM);
#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: V0_REGNUM = %d\n",
- V0_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: V0_REGNUM = %d\n", V0_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: VM_MIN_ADDRESS = %ld\n",
(long) VM_MIN_ADDRESS);
fprintf_unfiltered (file,
- "mips_dump_tdep: ZERO_REGNUM = %d\n",
- ZERO_REGNUM);
+ "mips_dump_tdep: ZERO_REGNUM = %d\n", ZERO_REGNUM);
fprintf_unfiltered (file,
- "mips_dump_tdep: _PROC_MAGIC_ = %d\n",
- _PROC_MAGIC_);
+ "mips_dump_tdep: _PROC_MAGIC_ = %d\n", _PROC_MAGIC_);
}
-extern initialize_file_ftype _initialize_mips_tdep; /* -Wmissing-prototypes */
+extern initialize_file_ftype _initialize_mips_tdep; /* -Wmissing-prototypes */
void
_initialize_mips_tdep (void)
static struct cmd_list_element *mipsfpulist = NULL;
struct cmd_list_element *c;
- mips_abi_string = mips_abi_strings [MIPS_ABI_UNKNOWN];
+ mips_abi_string = mips_abi_strings[MIPS_ABI_UNKNOWN];
if (MIPS_ABI_LAST + 1
!= sizeof (mips_abi_strings) / sizeof (mips_abi_strings[0]))
internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync");
gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
+ mips_pdr_data = register_objfile_data ();
+
/* Add root prefix command for all "set mips"/"show mips" commands */
add_prefix_cmd ("mips", no_class, set_mips_command,
"Various MIPS specific commands.",
&showmipscmdlist, "show mips ", 0, &showlist);
/* Allow the user to override the saved register size. */
- add_show_from_set (add_set_enum_cmd ("saved-gpreg-size",
- class_obscure,
- size_enums,
- &mips_saved_regsize_string, "\
+ deprecated_add_show_from_set (add_set_enum_cmd ("saved-gpreg-size",
+ class_obscure,
+ size_enums,
+ &mips_abi_regsize_string, "\
Set size of general purpose registers saved on the stack.\n\
This option can be set to one of:\n\
32 - Force GDB to treat saved GP registers as 32-bit\n\
64 - Force GDB to treat saved GP registers as 64-bit\n\
auto - Allow GDB to use the target's default setting or autodetect the\n\
saved GP register size from information contained in the executable.\n\
- (default: auto)",
- &setmipscmdlist),
- &showmipscmdlist);
+ (default: auto)", &setmipscmdlist), &showmipscmdlist);
/* Allow the user to override the argument stack size. */
- add_show_from_set (add_set_enum_cmd ("stack-arg-size",
- class_obscure,
- size_enums,
- &mips_stack_argsize_string, "\
+ deprecated_add_show_from_set
+ (add_set_enum_cmd ("stack-arg-size",
+ class_obscure,
+ size_enums,
+ &mips_stack_argsize_string, "\
Set the amount of stack space reserved for each argument.\n\
This option can be set to one of:\n\
32 - Force GDB to allocate 32-bit chunks per argument\n\
64 - Force GDB to allocate 64-bit chunks per argument\n\
auto - Allow GDB to determine the correct setting from the current\n\
- target and executable (default)",
- &setmipscmdlist),
- &showmipscmdlist);
+ target and executable (default)", &setmipscmdlist),
+ &showmipscmdlist);
/* Allow the user to override the ABI. */
c = add_set_enum_cmd
"This option can be set to one of:\n"
" auto - the default ABI associated with the current binary\n"
" o32\n"
- " o64\n"
- " n32\n"
- " n64\n"
- " eabi32\n"
- " eabi64",
- &setmipscmdlist);
+ " o64\n" " n32\n" " n64\n" " eabi32\n" " eabi64", &setmipscmdlist);
set_cmd_sfunc (c, mips_abi_update);
add_cmd ("abi", class_obscure, show_mips_abi,
- "Show ABI in use by MIPS target", &showmipscmdlist);
+ "Show ABI in use by MIPS target", &showmipscmdlist);
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
add_cmd ("none", class_support, set_mipsfpu_none_command,
- "Select no MIPS floating-point coprocessor.",
- &mipsfpulist);
+ "Select no MIPS floating-point coprocessor.", &mipsfpulist);
add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
command.c doesn't deal with that. So make it a var_zinteger
because the user can always use "999999" or some such for unlimited. */
c = add_set_cmd ("heuristic-fence-post", class_support, var_zinteger,
- (char *) &heuristic_fence_post,
- "\
+ (char *) &heuristic_fence_post, "\
Set the distance searched for the start of a function.\n\
If you are debugging a stripped executable, GDB needs to search through the\n\
program for the start of a function. This command sets the distance of the\n\
-search. The only need to set it is when debugging a stripped executable.",
- &setlist);
+search. The only need to set it is when debugging a stripped executable.", &setlist);
/* We need to throw away the frame cache when we set this, since it
might change our ability to get backtraces. */
set_cmd_sfunc (c, reinit_frame_cache_sfunc);
- add_show_from_set (c, &showlist);
+ deprecated_add_show_from_set (c, &showlist);
/* Allow the user to control whether the upper bits of 64-bit
addresses should be zeroed. */
add_setshow_auto_boolean_cmd ("mask-address", no_class, &mask_address_var, "\
-Set zeroing of upper 32 bits of 64-bit addresses.\n\
+Set zeroing of upper 32 bits of 64-bit addresses.", "\
+Show zeroing of upper 32 bits of 64-bit addresses.", "\
Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\
allow GDB to determine the correct value.\n", "\
-Show zeroing of upper 32 bits of 64-bit addresses.",
- NULL, show_mask_address,
- &setmipscmdlist, &showmipscmdlist);
+Zerroing of upper 32 bits of 64-bit address is %s.",
+ NULL, show_mask_address, &setmipscmdlist, &showmipscmdlist);
/* Allow the user to control the size of 32 bit registers within the
raw remote packet. */
- add_setshow_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
- var_boolean, &mips64_transfers_32bit_regs_p, "\
-Set compatibility with 64-bit MIPS targets that transfer 32-bit quantities.\n\
-Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
-that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
-64 bits for others. Use \"off\" to disable compatibility mode", "\
-Show compatibility with 64-bit MIPS targets that transfer 32-bit quantities.\n\
+ add_setshow_boolean_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
+ &mips64_transfers_32bit_regs_p, "\
+Set compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
+Show compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
-64 bits for others. Use \"off\" to disable compatibility mode",
- set_mips64_transfers_32bit_regs, NULL,
- &setlist, &showlist);
+64 bits for others. Use \"off\" to disable compatibility mode", "\
+Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s.",
+ set_mips64_transfers_32bit_regs, NULL, &setlist, &showlist);
/* Debug this files internals. */
- add_show_from_set (add_set_cmd ("mips", class_maintenance, var_zinteger,
- &mips_debug, "Set mips debugging.\n\
+ deprecated_add_show_from_set
+ (add_set_cmd ("mips", class_maintenance, var_zinteger,
+ &mips_debug, "Set mips debugging.\n\
When non-zero, mips specific debugging is enabled.", &setdebuglist),
- &showdebuglist);
+ &showdebuglist);
}