#include "symcat.h"
#include "sim-regno.h"
#include "dis-asm.h"
+#include "frame-unwind.h"
+#include "frame-base.h"
+#include "trad-frame.h"
+#include "infcall.h"
+#include "floatformat.h"
+
+static const struct objfile_data *mips_pdr_data;
static void set_reg_offset (CORE_ADDR *saved_regs, int regnum, CORE_ADDR off);
static struct type *mips_register_type (struct gdbarch *gdbarch, int regnum);
};
struct frame_extra_info
- {
- mips_extra_func_info_t proc_desc;
- int num_args;
- };
+{
+ mips_extra_func_info_t proc_desc;
+ int num_args;
+};
/* Various MIPS ISA options (related to stack analysis) can be
overridden dynamically. Establish an enum/array for managing
};
/* Some MIPS boards don't support floating point while others only
- support single-precision floating-point operations. See also
- FP_REGISTER_DOUBLE. */
+ support single-precision floating-point operations. */
enum mips_fpu_type
- {
- MIPS_FPU_DOUBLE, /* Full double precision floating point. */
- MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
- MIPS_FPU_NONE /* No floating point. */
- };
+{
+ MIPS_FPU_DOUBLE, /* Full double precision floating point. */
+ MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
+ MIPS_FPU_NONE /* No floating point. */
+};
#ifndef MIPS_DEFAULT_FPU_TYPE
#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_DOUBLE
/* MIPS specific per-architecture information */
struct gdbarch_tdep
- {
- /* from the elf header */
- int elf_flags;
-
- /* mips options */
- enum mips_abi mips_abi;
- enum mips_abi found_abi;
- enum mips_fpu_type mips_fpu_type;
- int mips_last_arg_regnum;
- int mips_last_fp_arg_regnum;
- int mips_default_saved_regsize;
- int mips_fp_register_double;
- int mips_default_stack_argsize;
- int default_mask_address_p;
- /* Is the target using 64-bit raw integer registers but only
- storing a left-aligned 32-bit value in each? */
- int mips64_transfers_32bit_regs_p;
- /* Indexes for various registers. IRIX and embedded have
- different values. This contains the "public" fields. Don't
- add any that do not need to be public. */
- const struct mips_regnum *regnum;
- /* Register names table for the current register set. */
- const char **mips_processor_reg_names;
- };
+{
+ /* from the elf header */
+ int elf_flags;
+
+ /* mips options */
+ enum mips_abi mips_abi;
+ enum mips_abi found_abi;
+ enum mips_fpu_type mips_fpu_type;
+ int mips_last_arg_regnum;
+ int mips_last_fp_arg_regnum;
+ int default_mask_address_p;
+ /* Is the target using 64-bit raw integer registers but only
+ storing a left-aligned 32-bit value in each? */
+ int mips64_transfers_32bit_regs_p;
+ /* Indexes for various registers. IRIX and embedded have
+ different values. This contains the "public" fields. Don't
+ add any that do not need to be public. */
+ const struct mips_regnum *regnum;
+ /* Register names table for the current register set. */
+ const char **mips_processor_reg_names;
+};
+
+static int
+n32n64_floatformat_always_valid (const struct floatformat *fmt,
+ const char *from)
+{
+ return 1;
+}
+
+/* FIXME: brobecker/2004-08-08: Long Double values are 128 bit long.
+ They are implemented as a pair of 64bit doubles where the high
+ part holds the result of the operation rounded to double, and
+ the low double holds the difference between the exact result and
+ the rounded result. So "high" + "low" contains the result with
+ added precision. Unfortunately, the floatformat structure used
+ by GDB is not powerful enough to describe this format. As a temporary
+ measure, we define a 128bit floatformat that only uses the high part.
+ We lose a bit of precision but that's probably the best we can do
+ for now with the current infrastructure. */
+
+static const struct floatformat floatformat_n32n64_long_double_big =
+{
+ floatformat_big, 128, 0, 1, 11, 1023, 2047, 12, 52,
+ floatformat_intbit_no,
+ "floatformat_ieee_double_big",
+ n32n64_floatformat_always_valid
+};
const struct mips_regnum *
mips_regnum (struct gdbarch *gdbarch)
{
void *buf = alloca (register_size (current_gdbarch, regnum));
deprecated_read_register_gen (regnum, buf);
- return (extract_signed_integer (buf, register_size (current_gdbarch, regnum)));
+ return (extract_signed_integer
+ (buf, register_size (current_gdbarch, regnum)));
}
static LONGEST
}
int
-mips_regsize (struct gdbarch *gdbarch)
+mips_isa_regsize (struct gdbarch *gdbarch)
{
return (gdbarch_bfd_arch_info (gdbarch)->bits_per_word
/ gdbarch_bfd_arch_info (gdbarch)->bits_per_byte);
/* Return the currently configured (or set) saved register size. */
-static const char *mips_saved_regsize_string = size_auto;
+static const char *mips_abi_regsize_string = size_auto;
static unsigned int
-mips_saved_regsize (struct gdbarch_tdep *tdep)
+mips_abi_regsize (struct gdbarch *gdbarch)
{
- if (mips_saved_regsize_string == size_auto)
- return tdep->mips_default_saved_regsize;
- else if (mips_saved_regsize_string == size_64)
+ if (mips_abi_regsize_string == size_auto)
+ switch (mips_abi (gdbarch))
+ {
+ case MIPS_ABI_EABI32:
+ case MIPS_ABI_O32:
+ return 4;
+ case MIPS_ABI_N32:
+ case MIPS_ABI_N64:
+ case MIPS_ABI_O64:
+ case MIPS_ABI_EABI64:
+ return 8;
+ case MIPS_ABI_UNKNOWN:
+ case MIPS_ABI_LAST:
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
+ }
+ else if (mips_abi_regsize_string == size_64)
return 8;
- else /* if (mips_saved_regsize_string == size_32) */
+ else /* if (mips_abi_regsize_string == size_32) */
return 4;
}
MSYMBOL_IS_SPECIAL tests the "special" bit in a minimal symbol */
static void
-mips_elf_make_msymbol_special (asymbol *sym, struct minimal_symbol *msym)
+mips_elf_make_msymbol_special (asymbol * sym, struct minimal_symbol *msym)
{
- if (((elf_symbol_type *)(sym))->internal_elf_sym.st_other == STO_MIPS16)
- {
- MSYMBOL_INFO (msym) = (char *)
- (((long) MSYMBOL_INFO (msym)) | 0x80000000);
- SYMBOL_VALUE_ADDRESS (msym) |= 1;
- }
+ if (((elf_symbol_type *) (sym))->internal_elf_sym.st_other == STO_MIPS16)
+ {
+ MSYMBOL_INFO (msym) = (char *)
+ (((long) MSYMBOL_INFO (msym)) | 0x80000000);
+ SYMBOL_VALUE_ADDRESS (msym) |= 1;
+ }
}
static int
static void
mips_xfer_register (struct regcache *regcache, int reg_num, int length,
- enum bfd_endian endian, bfd_byte *in, const bfd_byte *out,
- int buf_offset)
+ enum bfd_endian endian, bfd_byte * in,
+ const bfd_byte * out, int buf_offset)
{
- bfd_byte reg[MAX_REGISTER_SIZE];
int reg_offset = 0;
gdb_assert (reg_num >= NUM_REGS);
/* Need to transfer the left or right part of the register, based on
case BFD_ENDIAN_LITTLE:
reg_offset = 0;
break;
- case BFD_ENDIAN_UNKNOWN: /* Indicates no alignment. */
+ case BFD_ENDIAN_UNKNOWN: /* Indicates no alignment. */
reg_offset = 0;
break;
default:
fprintf_unfiltered (gdb_stdlog, "%02x", out[buf_offset + i]);
}
if (in != NULL)
- regcache_cooked_read_part (regcache, reg_num, reg_offset, length, in + buf_offset);
+ regcache_cooked_read_part (regcache, reg_num, reg_offset, length,
+ in + buf_offset);
if (out != NULL)
- regcache_cooked_write_part (regcache, reg_num, reg_offset, length, out + buf_offset);
+ regcache_cooked_write_part (regcache, reg_num, reg_offset, length,
+ out + buf_offset);
if (mips_debug && in != NULL)
{
int i;
{
/* MIPS1 and MIPS2 have only 32 bit FPRs, and the FR bit is not
meaningful. */
- if (register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0) == 4)
+ if (register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0) ==
+ 4)
return 0;
#if 0
return 0;
}
-/* Indicate that the ABI makes use of double-precision registers
- provided by the FPU (rather than combining pairs of registers to
- form double-precision values). See also MIPS_FPU_TYPE. */
-#define FP_REGISTER_DOUBLE (gdbarch_tdep (current_gdbarch)->mips_fp_register_double)
-
/* The amount of space reserved on the stack for registers. This is
- different to MIPS_SAVED_REGSIZE as it determines the alignment of
+ different to MIPS_ABI_REGSIZE as it determines the alignment of
data allocated after the registers have run out. */
static const char *mips_stack_argsize_string = size_auto;
static unsigned int
-mips_stack_argsize (struct gdbarch_tdep *tdep)
+mips_stack_argsize (struct gdbarch *gdbarch)
{
if (mips_stack_argsize_string == size_auto)
- return tdep->mips_default_stack_argsize;
+ return mips_abi_regsize (gdbarch);
else if (mips_stack_argsize_string == size_64)
return 8;
- else /* if (mips_stack_argsize_string == size_32) */
+ else /* if (mips_stack_argsize_string == size_32) */
return 4;
}
static mips_extra_func_info_t heuristic_proc_desc (CORE_ADDR, CORE_ADDR,
struct frame_info *, int);
+static mips_extra_func_info_t non_heuristic_proc_desc (CORE_ADDR pc,
+ CORE_ADDR *addrptr);
static CORE_ADDR heuristic_proc_start (CORE_ADDR);
mips_register_name(). Processor specific registers 32 and above
are listed in the followign tables. */
-enum { NUM_MIPS_PROCESSOR_REGS = (90 - 32) };
+enum
+{ NUM_MIPS_PROCESSOR_REGS = (90 - 32) };
/* Generic MIPS. */
static const char *mips_generic_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
- "sr", "lo", "hi", "bad", "cause","pc",
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", ""/*"fp"*/, "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir", "" /*"fp" */ , "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
};
/* Names of IDT R3041 registers. */
static const char *mips_r3041_reg_names[] = {
- "sr", "lo", "hi", "bad", "cause","pc",
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "fsr", "fir", "",/*"fp"*/ "",
- "", "", "bus", "ccfg", "", "", "", "",
- "", "", "port", "cmp", "", "", "epc", "prid",
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "fsr", "fir", "", /*"fp" */ "",
+ "", "", "bus", "ccfg", "", "", "", "",
+ "", "", "port", "cmp", "", "", "epc", "prid",
};
/* Names of tx39 registers. */
static const char *mips_tx39_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
- "sr", "lo", "hi", "bad", "cause","pc",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "config", "cache", "debug", "depc", "epc", ""
+ "sr", "lo", "hi", "bad", "cause", "pc",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "config", "cache", "debug", "depc", "epc", ""
};
/* Names of IRIX registers. */
static const char *mips_irix_reg_names[NUM_MIPS_PROCESSOR_REGS] = {
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
- "pc", "cause", "bad", "hi", "lo", "fsr", "fir"
+ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
+ "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
+ "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
+ "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
+ "pc", "cause", "bad", "hi", "lo", "fsr", "fir"
};
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
/* GPR names for all ABIs other than n32/n64. */
static char *mips_gpr_names[] = {
- "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra",
};
/* GPR names for n32 and n64 ABIs. */
static char *mips_n32_n64_gpr_names[] = {
- "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
- "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
};
enum mips_abi abi = mips_abi (current_gdbarch);
/* FIXME: cagney/2003-04-13: Can't yet use gdbarch_num_regs
(gdbarch), as not all architectures are multi-arch. */
raw_p = rawnum < NUM_REGS;
- if (REGISTER_NAME (regnum) == NULL
- || REGISTER_NAME (regnum)[0] == '\0')
+ if (REGISTER_NAME (regnum) == NULL || REGISTER_NAME (regnum)[0] == '\0')
return 0;
if (reggroup == float_reggroup)
return float_p && pseudo;
/* Restore the same pseudo register. */
if (reggroup == restore_reggroup)
return raw_p && pseudo;
- return 0;
+ return 0;
}
/* Map the symbol table registers which live in the range [1 *
int rawnum = cookednum % NUM_REGS;
gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
if (register_size (gdbarch, rawnum) == register_size (gdbarch, cookednum))
- return regcache_raw_read (regcache, rawnum, buf);
- else if (register_size (gdbarch, rawnum) > register_size (gdbarch, cookednum))
+ regcache_raw_read (regcache, rawnum, buf);
+ else if (register_size (gdbarch, rawnum) >
+ register_size (gdbarch, cookednum))
{
if (gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p
|| TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
}
static void
-mips_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
- int cookednum, const void *buf)
+mips_pseudo_register_write (struct gdbarch *gdbarch,
+ struct regcache *regcache, int cookednum,
+ const void *buf)
{
int rawnum = cookednum % NUM_REGS;
gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS);
if (register_size (gdbarch, rawnum) == register_size (gdbarch, cookednum))
- return regcache_raw_write (regcache, rawnum, buf);
- else if (register_size (gdbarch, rawnum) > register_size (gdbarch, cookednum))
+ regcache_raw_write (regcache, rawnum, buf);
+ else if (register_size (gdbarch, rawnum) >
+ register_size (gdbarch, cookednum))
{
if (gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p
|| TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
}
/* Table to translate MIPS16 register field to actual register number. */
-static int mips16_to_32_reg[8] =
-{16, 17, 2, 3, 4, 5, 6, 7};
+static int mips16_to_32_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 };
/* Heuristic_proc_start may hunt through the text section for a long
time across a 2400 baud serial line. Allows the user to limit this
#define SET_PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym = _PROC_MAGIC_)
struct linked_proc_info
- {
- struct mips_extra_func_info info;
- struct linked_proc_info *next;
- }
+{
+ struct mips_extra_func_info info;
+ struct linked_proc_info *next;
+}
*linked_proc_desc_table = NULL;
/* Number of bytes of storage in the actual machine representation for
{
return (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
&& register_size (current_gdbarch, regnum) == 4
- && (regnum) >= mips_regnum (current_gdbarch)->fp0 && (regnum) < mips_regnum (current_gdbarch)->fp0 + 32
- && TYPE_CODE(type) == TYPE_CODE_FLT
- && TYPE_LENGTH(type) == 8);
+ && (regnum % NUM_REGS) >= mips_regnum (current_gdbarch)->fp0
+ && (regnum % NUM_REGS) < mips_regnum (current_gdbarch)->fp0 + 32
+ && TYPE_CODE (type) == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8);
}
static void
&& (regnum % NUM_REGS) < mips_regnum (current_gdbarch)->fp0 + 32)
{
/* The floating-point registers raw, or cooked, always match
- mips_regsize(), and also map 1:1, byte for byte. */
+ mips_isa_regsize(), and also map 1:1, byte for byte. */
switch (gdbarch_byte_order (gdbarch))
{
case BFD_ENDIAN_BIG:
- if (mips_regsize (gdbarch) == 4)
+ if (mips_isa_regsize (gdbarch) == 4)
return builtin_type_ieee_single_big;
else
return builtin_type_ieee_double_big;
case BFD_ENDIAN_LITTLE:
- if (mips_regsize (gdbarch) == 4)
+ if (mips_isa_regsize (gdbarch) == 4)
return builtin_type_ieee_single_little;
else
return builtin_type_ieee_double_little;
internal_error (__FILE__, __LINE__, "bad switch");
}
}
- else if (regnum >= (NUM_REGS + mips_regnum (current_gdbarch)->fp_control_status)
- && regnum <= NUM_REGS + LAST_EMBED_REGNUM)
- /* The pseudo/cooked view of the embedded registers is always
- 32-bit. The raw view is handled below. */
- return builtin_type_int32;
- else if (regnum >= NUM_REGS && mips_regsize (gdbarch)
- && gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p)
- /* The target, while using a 64-bit register buffer, is only
- transfering 32-bits of each integer register. Reflect this in
- the cooked/pseudo register value. */
- return builtin_type_int32;
- else if (mips_regsize (gdbarch) == 8)
- /* 64-bit ISA. */
- return builtin_type_int64;
+ else if (regnum < NUM_REGS)
+ {
+ /* The raw or ISA registers. These are all sized according to
+ the ISA regsize. */
+ if (mips_isa_regsize (gdbarch) == 4)
+ return builtin_type_int32;
+ else
+ return builtin_type_int64;
+ }
else
- /* 32-bit ISA. */
- return builtin_type_int32;
+ {
+ /* The cooked or ABI registers. These are sized according to
+ the ABI (with a few complications). */
+ if (regnum >= (NUM_REGS
+ + mips_regnum (current_gdbarch)->fp_control_status)
+ && regnum <= NUM_REGS + LAST_EMBED_REGNUM)
+ /* The pseudo/cooked view of the embedded registers is always
+ 32-bit. The raw view is handled below. */
+ return builtin_type_int32;
+ else if (gdbarch_tdep (gdbarch)->mips64_transfers_32bit_regs_p)
+ /* The target, while possibly using a 64-bit register buffer,
+ is only transfering 32-bits of each integer register.
+ Reflect this in the cooked/pseudo (ABI) register value. */
+ return builtin_type_int32;
+ else if (mips_abi_regsize (gdbarch) == 4)
+ /* The ABI is restricted to 32-bit registers (the ISA could be
+ 32- or 64-bit). */
+ return builtin_type_int32;
+ else
+ /* 64-bit ABI. */
+ return builtin_type_int64;
+ }
}
/* TARGET_READ_SP -- Remove useless bits from the stack pointer. */
static CORE_ADDR
mips_read_sp (void)
{
- return read_signed_register (SP_REGNUM);
+ return read_signed_register (MIPS_SP_REGNUM);
}
/* Should the upper word of 64-bit addresses be zeroed? */
case AUTO_BOOLEAN_AUTO:
return tdep->default_mask_address_p;
default:
- internal_error (__FILE__, __LINE__,
- "mips_mask_address_p: bad switch");
+ internal_error (__FILE__, __LINE__, "mips_mask_address_p: bad switch");
return -1;
}
}
printf_filtered ("The 32 bit mips address mask is disabled\n");
break;
case AUTO_BOOLEAN_AUTO:
- printf_filtered ("The 32 bit address mask is set automatically. Currently %s\n",
- mips_mask_address_p (tdep) ? "enabled" : "disabled");
+ printf_filtered
+ ("The 32 bit address mask is set automatically. Currently %s\n",
+ mips_mask_address_p (tdep) ? "enabled" : "disabled");
break;
default:
- internal_error (__FILE__, __LINE__,
- "show_mask_address: bad switch");
+ internal_error (__FILE__, __LINE__, "show_mask_address: bad switch");
break;
}
}
-/* Should call_function allocate stack space for a struct return? */
-
-static int
-mips_eabi_use_struct_convention (int gcc_p, struct type *type)
-{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- return (TYPE_LENGTH (type) > 2 * mips_saved_regsize (tdep));
-}
-
-/* Should call_function pass struct by reference?
- For each architecture, structs are passed either by
- value or by reference, depending on their size. */
-
-static int
-mips_eabi_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- enum type_code typecode = TYPE_CODE (check_typedef (type));
- int len = TYPE_LENGTH (check_typedef (type));
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
-
- if (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
- return (len > mips_saved_regsize (tdep));
-
- return 0;
-}
-
-static int
-mips_n32n64_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- return 0; /* Assumption: N32/N64 never passes struct by ref. */
-}
-
-static int
-mips_o32_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- return 0; /* Assumption: O32/O64 never passes struct by ref. */
-}
-
/* Tell if the program counter value in MEMADDR is in a MIPS16 function. */
static int
return 0;
}
-/* MIPS believes that the PC has a sign extended value. Perhaphs the
+/* MIPS believes that the PC has a sign extended value. Perhaps the
all registers should be sign extended for simplicity? */
static CORE_ADDR
mips_read_pc (ptid_t ptid)
{
- return read_signed_register_pid (PC_REGNUM, ptid);
+ return read_signed_register_pid (mips_regnum (current_gdbarch)->pc, ptid);
+}
+
+static CORE_ADDR
+mips_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_unwind_register_signed (next_frame,
+ NUM_REGS + mips_regnum (gdbarch)->pc);
+}
+
+/* Assuming NEXT_FRAME->prev is a dummy, return the frame ID of that
+ dummy frame. The frame ID's base needs to match the TOS value
+ saved by save_dummy_frame_tos(), and the PC match the dummy frame's
+ breakpoint. */
+
+static struct frame_id
+mips_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_id_build (frame_unwind_register_signed (next_frame, NUM_REGS + MIPS_SP_REGNUM),
+ frame_pc_unwind (next_frame));
+}
+
+static void
+mips_write_pc (CORE_ADDR pc, ptid_t ptid)
+{
+ write_register_pid (mips_regnum (current_gdbarch)->pc, pc, ptid);
}
/* This returns the PC of the first inst after the prologue. If we can't
find the prologue, then return 0. */
static CORE_ADDR
-after_prologue (CORE_ADDR pc,
- mips_extra_func_info_t proc_desc)
+after_prologue (CORE_ADDR pc, mips_extra_func_info_t proc_desc)
{
struct symtab_and_line sal;
CORE_ADDR func_addr, func_end;
{
/* If function is frameless, then we need to do it the hard way. I
strongly suspect that frameless always means prologueless... */
- if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+ if (PROC_FRAME_REG (proc_desc) == MIPS_SP_REGNUM
&& PROC_FRAME_OFFSET (proc_desc) == 0)
return 0;
}
{
int reg;
- if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */
+ if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */
|| (inst & 0xffe00000) == 0xafc00000 /* sw reg,n($r30) */
|| (inst & 0xffe00000) == 0xffa00000) /* sd reg,n($sp) */
{
*gen_mask |= (1 << reg);
}
else if ((inst & 0xffe00000) == 0xe7a00000 /* swc1 freg,n($sp) */
- || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
+ || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
|| (inst & 0xffe00000) == 0xf7a00000) /* sdc1 freg,n($sp) */
{
}
else
instlen = MIPS_INSTLEN;
- status = read_memory_nobpt (addr, buf, instlen);
+ status = deprecated_read_memory_nobpt (addr, buf, instlen);
+ if (status)
+ memory_error (status, addr);
+ return extract_unsigned_integer (buf, instlen);
+}
+
+static ULONGEST
+mips16_fetch_instruction (CORE_ADDR addr)
+{
+ char buf[MIPS_INSTLEN];
+ int instlen;
+ int status;
+
+ instlen = MIPS16_INSTLEN;
+ addr = unmake_mips16_addr (addr);
+ status = deprecated_read_memory_nobpt (addr, buf, instlen);
+ if (status)
+ memory_error (status, addr);
+ return extract_unsigned_integer (buf, instlen);
+}
+
+static ULONGEST
+mips32_fetch_instruction (CORE_ADDR addr)
+{
+ char buf[MIPS_INSTLEN];
+ int instlen;
+ int status;
+ instlen = MIPS_INSTLEN;
+ status = deprecated_read_memory_nobpt (addr, buf, instlen);
if (status)
memory_error (status, addr);
return extract_unsigned_integer (buf, instlen);
if ((inst & 0xe0000000) != 0) /* Not a special, jump or branch instruction */
{
if (itype_op (inst) >> 2 == 5)
- /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
+ /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
{
op = (itype_op (inst) & 0x03);
switch (op)
}
}
else if (itype_op (inst) == 17 && itype_rs (inst) == 8)
- /* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
+ /* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
{
int tf = itype_rt (inst) & 0x01;
int cnum = itype_rt (inst) >> 2;
- int fcrcs = read_signed_register (mips_regnum (current_gdbarch)->fp_control_status);
+ int fcrcs =
+ read_signed_register (mips_regnum (current_gdbarch)->
+ fp_control_status);
int cond = ((fcrcs >> 24) & 0x0e) | ((fcrcs >> 23) & 0x01);
if (((cond >> cnum) & 0x01) == tf)
pc += 4;
}
- break; /* end SPECIAL */
+ break; /* end SPECIAL */
case 1: /* REGIMM */
{
op = itype_rt (inst); /* branch condition */
pc += 4;
}
}
- break; /* end REGIMM */
+ break; /* end REGIMM */
case 2: /* J */
case 3: /* JAL */
{
/* I am heaping all the fields of the formats into one structure and
then, only the fields which are involved in instruction extension */
struct upk_mips16
- {
- CORE_ADDR offset;
- unsigned int regx; /* Function in i8 type */
- unsigned int regy;
- };
+{
+ CORE_ADDR offset;
+ unsigned int regx; /* Function in i8 type */
+ unsigned int regy;
+};
/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same format
unpack_mips16 (CORE_ADDR pc,
unsigned int extension,
unsigned int inst,
- enum mips16_inst_fmts insn_format,
- struct upk_mips16 *upk)
+ enum mips16_inst_fmts insn_format, struct upk_mips16 *upk)
{
CORE_ADDR offset;
int regx;
{
value = extended_offset (extension);
value = value << 11; /* rom for the original value */
- value |= inst & 0x7ff; /* eleven bits from instruction */
+ value |= inst & 0x7ff; /* eleven bits from instruction */
}
else
{
break;
}
default:
- internal_error (__FILE__, __LINE__,
- "bad switch");
+ internal_error (__FILE__, __LINE__, "bad switch");
}
upk->offset = offset;
upk->regx = regx;
static CORE_ADDR
extended_mips16_next_pc (CORE_ADDR pc,
- unsigned int extension,
- unsigned int insn)
+ unsigned int extension, unsigned int insn)
{
int op = (insn >> 11);
switch (op)
{
- case 2: /* Branch */
+ case 2: /* Branch */
{
CORE_ADDR offset;
struct upk_mips16 upk;
pc += (offset << 1) + 2;
break;
}
- case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
+ case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
{
struct upk_mips16 upk;
unpack_mips16 (pc, extension, insn, jalxtype, &upk);
pc |= 0x01;
break;
}
- case 4: /* beqz */
+ case 4: /* beqz */
{
struct upk_mips16 upk;
int reg;
pc += 2;
break;
}
- case 5: /* bnez */
+ case 5: /* bnez */
{
struct upk_mips16 upk;
int reg;
pc += 2;
break;
}
- case 12: /* I8 Formats btez btnez */
+ case 12: /* I8 Formats btez btnez */
{
struct upk_mips16 upk;
int reg;
pc += 2;
break;
}
- case 29: /* RR Formats JR, JALR, JALR-RA */
+ case 29: /* RR Formats JR, JALR, JALR-RA */
{
struct upk_mips16 upk;
/* upk.fmt = rrtype; */
break;
case 1:
reg = 31;
- break; /* Function return instruction */
+ break; /* Function return instruction */
case 2:
reg = upk.regx;
break;
default:
reg = 31;
- break; /* BOGUS Guess */
+ break; /* BOGUS Guess */
}
pc = read_signed_register (reg);
}
return mips32_next_pc (pc);
}
-/* Set up the 'saved_regs' array. This is a data structure containing
- the addresses on the stack where each register has been saved, for
- each stack frame. Registers that have not been saved will have
- zero here. The stack pointer register is special: rather than the
- address where the stack register has been saved,
- saved_regs[SP_REGNUM] will have the actual value of the previous
- frame's stack register. */
+struct mips_frame_cache
+{
+ CORE_ADDR base;
+ struct trad_frame_saved_reg *saved_regs;
+};
-static void
-mips_find_saved_regs (struct frame_info *fci)
+
+static struct mips_frame_cache *
+mips_mdebug_frame_cache (struct frame_info *next_frame, void **this_cache)
{
- int ireg;
+ mips_extra_func_info_t proc_desc;
+ struct mips_frame_cache *cache;
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* r0 bit means kernel trap */
int kernel_trap;
/* What registers have been saved? Bitmasks. */
unsigned long gen_mask, float_mask;
- mips_extra_func_info_t proc_desc;
- t_inst inst;
- CORE_ADDR *saved_regs;
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
-
- if (deprecated_get_frame_saved_regs (fci) != NULL)
- return;
- saved_regs = frame_saved_regs_zalloc (fci);
-
- /* If it is the frame for sigtramp, the saved registers are located
- in a sigcontext structure somewhere on the stack. If the stack
- layout for sigtramp changes we might have to change these
- constants and the companion fixup_sigtramp in mdebugread.c */
-#ifndef SIGFRAME_BASE
- /* To satisfy alignment restrictions, sigcontext is located 4 bytes
- above the sigtramp frame. */
-#define SIGFRAME_BASE mips_regsize (current_gdbarch)
-/* FIXME! Are these correct?? */
-#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * mips_regsize (current_gdbarch))
-#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 3 * mips_regsize (current_gdbarch))
-#define SIGFRAME_FPREGSAVE_OFF \
- (SIGFRAME_REGSAVE_OFF + MIPS_NUMREGS * mips_regsize (current_gdbarch) + 3 * mips_regsize (current_gdbarch))
-#endif
- if ((get_frame_type (fci) == SIGTRAMP_FRAME))
- {
- for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
- {
- CORE_ADDR reg_position = (get_frame_base (fci) + SIGFRAME_REGSAVE_OFF
- + ireg * mips_regsize (current_gdbarch));
- set_reg_offset (saved_regs, ireg, reg_position);
- }
- for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
- {
- CORE_ADDR reg_position = (get_frame_base (fci)
- + SIGFRAME_FPREGSAVE_OFF
- + ireg * mips_regsize (current_gdbarch));
- set_reg_offset (saved_regs, mips_regnum (current_gdbarch)->fp0 + ireg, reg_position);
- }
- set_reg_offset (saved_regs, PC_REGNUM, get_frame_base (fci) + SIGFRAME_PC_OFF);
- /* SP_REGNUM, contains the value and not the address. */
- set_reg_offset (saved_regs, SP_REGNUM, get_frame_base (fci));
- return;
- }
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
- proc_desc = get_frame_extra_info (fci)->proc_desc;
+ /* Get the mdebug proc descriptor. */
+ proc_desc = find_proc_desc (frame_pc_unwind (next_frame), next_frame, 1);
if (proc_desc == NULL)
/* I'm not sure how/whether this can happen. Normally when we
can't find a proc_desc, we "synthesize" one using
heuristic_proc_desc and set the saved_regs right away. */
- return;
+ return cache;
+
+ /* Extract the frame's base. */
+ cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
+ + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
kernel_trap = PROC_REG_MASK (proc_desc) & 1;
gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
-
- if (/* In any frame other than the innermost or a frame interrupted
- by a signal, we assume that all registers have been saved.
- This assumes that all register saves in a function happen
- before the first function call. */
- (get_next_frame (fci) == NULL
- || (get_frame_type (get_next_frame (fci)) == SIGTRAMP_FRAME))
-
- /* In a dummy frame we know exactly where things are saved. */
- && !PROC_DESC_IS_DUMMY (proc_desc)
-
- /* Don't bother unless we are inside a function prologue.
- Outside the prologue, we know where everything is. */
-
- && in_prologue (get_frame_pc (fci), PROC_LOW_ADDR (proc_desc))
-
- /* Not sure exactly what kernel_trap means, but if it means the
- kernel saves the registers without a prologue doing it, we
- better not examine the prologue to see whether registers
- have been saved yet. */
- && !kernel_trap)
+
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc))
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we
+ better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
{
/* We need to figure out whether the registers that the
proc_desc claims are saved have been saved yet. */
/* Bitmasks; set if we have found a save for the register. */
unsigned long gen_save_found = 0;
unsigned long float_save_found = 0;
- int instlen;
+ int mips16;
/* If the address is odd, assume this is MIPS16 code. */
addr = PROC_LOW_ADDR (proc_desc);
- instlen = pc_is_mips16 (addr) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+ mips16 = pc_is_mips16 (addr);
/* Scan through this function's instructions preceding the
current PC, and look for those that save registers. */
- while (addr < get_frame_pc (fci))
+ while (addr < frame_pc_unwind (next_frame))
{
- inst = mips_fetch_instruction (addr);
- if (pc_is_mips16 (addr))
- mips16_decode_reg_save (inst, &gen_save_found);
+ if (mips16)
+ {
+ mips16_decode_reg_save (mips16_fetch_instruction (addr),
+ &gen_save_found);
+ addr += MIPS16_INSTLEN;
+ }
else
- mips32_decode_reg_save (inst, &gen_save_found, &float_save_found);
- addr += instlen;
+ {
+ mips32_decode_reg_save (mips32_fetch_instruction (addr),
+ &gen_save_found, &float_save_found);
+ addr += MIPS_INSTLEN;
+ }
}
gen_mask = gen_save_found;
float_mask = float_save_found;
/* Fill in the offsets for the registers which gen_mask says were
saved. */
{
- CORE_ADDR reg_position = (get_frame_base (fci)
+ CORE_ADDR reg_position = (cache->base
+ PROC_REG_OFFSET (proc_desc));
+ int ireg;
for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
if (gen_mask & 0x80000000)
{
- set_reg_offset (saved_regs, ireg, reg_position);
- reg_position -= mips_saved_regsize (tdep);
+ cache->saved_regs[NUM_REGS + ireg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
}
instruction that saves $s0 or $s1, correct their saved addresses. */
if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
{
- inst = mips_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+ ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc));
if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
/* entry */
{
int sreg_count = (inst >> 6) & 3;
/* Check if the ra register was pushed on the stack. */
- CORE_ADDR reg_position = (get_frame_base (fci)
+ CORE_ADDR reg_position = (cache->base
+ PROC_REG_OFFSET (proc_desc));
if (inst & 0x20)
- reg_position -= mips_saved_regsize (tdep);
+ reg_position -= mips_abi_regsize (gdbarch);
/* Check if the s0 and s1 registers were pushed on the
- stack. */
+ stack. */
+ /* NOTE: cagney/2004-02-08: Huh? This is doing no such
+ check. */
for (reg = 16; reg < sreg_count + 16; reg++)
{
- set_reg_offset (saved_regs, reg, reg_position);
- reg_position -= mips_saved_regsize (tdep);
+ cache->saved_regs[NUM_REGS + reg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
}
}
/* Fill in the offsets for the registers which float_mask says were
saved. */
{
- CORE_ADDR reg_position = (get_frame_base (fci)
+ CORE_ADDR reg_position = (cache->base
+ PROC_FREG_OFFSET (proc_desc));
-
+ int ireg;
/* Fill in the offsets for the float registers which float_mask
says were saved. */
for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
if (float_mask & 0x80000000)
{
- if (mips_saved_regsize (tdep) == 4
+ if (mips_abi_regsize (gdbarch) == 4
&& TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
/* On a big endian 32 bit ABI, floating point registers
- are paired to form doubles such that the most
- significant part is in $f[N+1] and the least
- significant in $f[N] vis: $f[N+1] ||| $f[N]. The
- registers are also spilled as a pair and stored as a
- double.
+ are paired to form doubles such that the most
+ significant part is in $f[N+1] and the least
+ significant in $f[N] vis: $f[N+1] ||| $f[N]. The
+ registers are also spilled as a pair and stored as a
+ double.
When little-endian the least significant part is
stored first leading to the memory order $f[N] and
then $f[N+1].
- Unfortunately, when big-endian the most significant
- part of the double is stored first, and the least
- significant is stored second. This leads to the
- registers being ordered in memory as firt $f[N+1] and
- then $f[N].
-
- For the big-endian case make certain that the
- addresses point at the correct (swapped) locations
- $f[N] and $f[N+1] pair (keep in mind that
- reg_position is decremented each time through the
- loop). */
+ Unfortunately, when big-endian the most significant
+ part of the double is stored first, and the least
+ significant is stored second. This leads to the
+ registers being ordered in memory as firt $f[N+1] and
+ then $f[N].
+
+ For the big-endian case make certain that the
+ addresses point at the correct (swapped) locations
+ $f[N] and $f[N+1] pair (keep in mind that
+ reg_position is decremented each time through the
+ loop). */
if ((ireg & 1))
- set_reg_offset (saved_regs, mips_regnum (current_gdbarch)->fp0 + ireg,
- reg_position - mips_saved_regsize (tdep));
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position - mips_abi_regsize (gdbarch);
else
- set_reg_offset (saved_regs, mips_regnum (current_gdbarch)->fp0 + ireg,
- reg_position + mips_saved_regsize (tdep));
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position + mips_abi_regsize (gdbarch);
}
else
- set_reg_offset (saved_regs, mips_regnum (current_gdbarch)->fp0 + ireg, reg_position);
- reg_position -= mips_saved_regsize (tdep);
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
- set_reg_offset (saved_regs, PC_REGNUM, saved_regs[RA_REGNUM]);
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc]
+ = cache->saved_regs[NUM_REGS + RA_REGNUM];
}
/* SP_REGNUM, contains the value and not the address. */
- set_reg_offset (saved_regs, SP_REGNUM, get_frame_base (fci));
+ trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
+
+ return (*this_cache);
}
-static CORE_ADDR
-read_next_frame_reg (struct frame_info *fi, int regno)
+static void
+mips_mdebug_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
{
- /* Always a pseudo. */
- gdb_assert (regno >= NUM_REGS);
- if (fi == NULL)
- {
- LONGEST val;
- regcache_cooked_read_signed (current_regcache, regno, &val);
- return val;
- }
- else if ((regno % NUM_REGS) == SP_REGNUM)
- /* The SP_REGNUM is special, its value is stored in saved_regs.
- In fact, it is so special that it can even only be fetched
- using a raw register number! Once this code as been converted
- to frame-unwind the problem goes away. */
- return frame_unwind_register_signed (fi, regno % NUM_REGS);
- else
- return frame_unwind_register_signed (fi, regno);
-
+ struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ this_cache);
+ (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
}
-/* mips_addr_bits_remove - remove useless address bits */
+static void
+mips_mdebug_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ this_cache);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
-static CORE_ADDR
-mips_addr_bits_remove (CORE_ADDR addr)
+static const struct frame_unwind mips_mdebug_frame_unwind =
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- if (mips_mask_address_p (tdep)
- && (((ULONGEST) addr) >> 32 == 0xffffffffUL))
- /* This hack is a work-around for existing boards using PMON, the
- simulator, and any other 64-bit targets that doesn't have true
- 64-bit addressing. On these targets, the upper 32 bits of
- addresses are ignored by the hardware. Thus, the PC or SP are
- likely to have been sign extended to all 1s by instruction
- sequences that load 32-bit addresses. For example, a typical
- piece of code that loads an address is this:
-
- lui $r2, <upper 16 bits>
- ori $r2, <lower 16 bits>
+ NORMAL_FRAME,
+ mips_mdebug_frame_this_id,
+ mips_mdebug_frame_prev_register
+};
- But the lui sign-extends the value such that the upper 32 bits
- may be all 1s. The workaround is simply to mask off these
- bits. In the future, gcc may be changed to support true 64-bit
- addressing, and this masking will have to be disabled. */
- return addr &= 0xffffffffUL;
- else
- return addr;
-}
+static const struct frame_unwind *
+mips_mdebug_frame_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ CORE_ADDR startaddr = 0;
+ mips_extra_func_info_t proc_desc;
+ int kernel_trap;
-/* mips_software_single_step() is called just before we want to resume
- the inferior, if we want to single-step it but there is no hardware
- or kernel single-step support (MIPS on GNU/Linux for example). We find
- the target of the coming instruction and breakpoint it.
+ /* Only use the mdebug frame unwinder on mdebug frames where all the
+ registers have been saved. Leave hard cases such as no mdebug or
+ in prologue for the heuristic unwinders. */
- single_step is also called just after the inferior stops. If we had
- set up a simulated single-step, we undo our damage. */
+ proc_desc = non_heuristic_proc_desc (pc, &startaddr);
+ if (proc_desc == NULL)
+ return NULL;
-void
-mips_software_single_step (enum target_signal sig, int insert_breakpoints_p)
-{
- static CORE_ADDR next_pc;
- typedef char binsn_quantum[BREAKPOINT_MAX];
- static binsn_quantum break_mem;
- CORE_ADDR pc;
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we better
+ not examine the prologue to see whether registers have been saved
+ yet. */
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ if (kernel_trap)
+ return &mips_mdebug_frame_unwind;
- if (insert_breakpoints_p)
- {
- pc = read_register (PC_REGNUM);
- next_pc = mips_next_pc (pc);
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (!in_prologue (pc, PROC_LOW_ADDR (proc_desc)))
+ return &mips_mdebug_frame_unwind;
- target_insert_breakpoint (next_pc, break_mem);
- }
- else
- target_remove_breakpoint (next_pc, break_mem);
+ return NULL;
}
static CORE_ADDR
-mips_init_frame_pc_first (int fromleaf, struct frame_info *prev)
+mips_mdebug_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
{
- CORE_ADDR pc, tmp;
-
- pc = ((fromleaf)
- ? DEPRECATED_SAVED_PC_AFTER_CALL (get_next_frame (prev))
- : get_next_frame (prev)
- ? DEPRECATED_FRAME_SAVED_PC (get_next_frame (prev))
- : read_pc ());
- tmp = SKIP_TRAMPOLINE_CODE (pc);
- return tmp ? tmp : pc;
+ struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ this_cache);
+ return info->base;
}
+static const struct frame_base mips_mdebug_frame_base = {
+ &mips_mdebug_frame_unwind,
+ mips_mdebug_frame_base_address,
+ mips_mdebug_frame_base_address,
+ mips_mdebug_frame_base_address
+};
-static CORE_ADDR
-mips_frame_saved_pc (struct frame_info *frame)
+static const struct frame_base *
+mips_mdebug_frame_base_sniffer (struct frame_info *next_frame)
{
- CORE_ADDR saved_pc;
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
-
- if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0))
- {
- /* Always unwind the cooked PC register value. */
- saved_pc = frame_unwind_register_signed (frame, NUM_REGS + PC_REGNUM);
- }
+ if (mips_mdebug_frame_sniffer (next_frame) != NULL)
+ return &mips_mdebug_frame_base;
else
- {
- mips_extra_func_info_t proc_desc
- = get_frame_extra_info (frame)->proc_desc;
- if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
- saved_pc = read_memory_integer ((get_frame_base (frame)
- - mips_saved_regsize (tdep))
- , mips_saved_regsize (tdep));
- else
- {
- /* We have to get the saved pc from the sigcontext if it is
- a signal handler frame. */
- int pcreg = (get_frame_type (frame) == SIGTRAMP_FRAME ? PC_REGNUM
- : proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM);
- saved_pc = read_next_frame_reg (frame, NUM_REGS + pcreg);
- }
- }
- return ADDR_BITS_REMOVE (saved_pc);
+ return NULL;
}
-static struct mips_extra_func_info temp_proc_desc;
+/* Heuristic unwinder for 16-bit MIPS instruction set (aka MIPS16).
+ Procedures that use the 32-bit instruction set are handled by the
+ mips_insn32 unwinder. */
-/* This hack will go away once the get_prev_frame() code has been
- modified to set the frame's type first. That is BEFORE init extra
- frame info et.al. is called. This is because it will become
- possible to skip the init extra info call for sigtramp and dummy
- frames. */
-static CORE_ADDR *temp_saved_regs;
+static struct mips_frame_cache *
+mips_insn16_frame_cache (struct frame_info *next_frame, void **this_cache)
+{
+ mips_extra_func_info_t proc_desc;
+ struct mips_frame_cache *cache;
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ /* r0 bit means kernel trap */
+ int kernel_trap;
+ /* What registers have been saved? Bitmasks. */
+ unsigned long gen_mask, float_mask;
-/* Set a register's saved stack address in temp_saved_regs. If an
- address has already been set for this register, do nothing; this
- way we will only recognize the first save of a given register in a
- function prologue.
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
- For simplicity, save the address in both [0 .. NUM_REGS) and
- [NUM_REGS .. 2*NUM_REGS). Strictly speaking, only the second range
- is used as it is only second range (the ABI instead of ISA
- registers) that comes into play when finding saved registers in a
- frame. */
+ /* Get the mdebug proc descriptor. */
+ proc_desc = find_proc_desc (frame_pc_unwind (next_frame), next_frame, 1);
+ if (proc_desc == NULL)
+ /* I'm not sure how/whether this can happen. Normally when we
+ can't find a proc_desc, we "synthesize" one using
+ heuristic_proc_desc and set the saved_regs right away. */
+ return cache;
-static void
-set_reg_offset (CORE_ADDR *saved_regs, int regno, CORE_ADDR offset)
-{
- if (saved_regs[regno] == 0)
+ /* Extract the frame's base. */
+ cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
+ + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
+
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
+ float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
+
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc))
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we
+ better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
{
- saved_regs[regno + 0 * NUM_REGS] = offset;
- saved_regs[regno + 1 * NUM_REGS] = offset;
- }
-}
+ /* We need to figure out whether the registers that the
+ proc_desc claims are saved have been saved yet. */
+ CORE_ADDR addr;
-/* Test whether the PC points to the return instruction at the
- end of a function. */
+ /* Bitmasks; set if we have found a save for the register. */
+ unsigned long gen_save_found = 0;
+ unsigned long float_save_found = 0;
+ int mips16;
-static int
-mips_about_to_return (CORE_ADDR pc)
-{
- if (pc_is_mips16 (pc))
- /* This mips16 case isn't necessarily reliable. Sometimes the compiler
- generates a "jr $ra"; other times it generates code to load
- the return address from the stack to an accessible register (such
- as $a3), then a "jr" using that register. This second case
- is almost impossible to distinguish from an indirect jump
- used for switch statements, so we don't even try. */
- return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */
- else
- return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */
-}
+ /* If the address is odd, assume this is MIPS16 code. */
+ addr = PROC_LOW_ADDR (proc_desc);
+ mips16 = pc_is_mips16 (addr);
+ /* Scan through this function's instructions preceding the
+ current PC, and look for those that save registers. */
+ while (addr < frame_pc_unwind (next_frame))
+ {
+ if (mips16)
+ {
+ mips16_decode_reg_save (mips16_fetch_instruction (addr),
+ &gen_save_found);
+ addr += MIPS16_INSTLEN;
+ }
+ else
+ {
+ mips32_decode_reg_save (mips32_fetch_instruction (addr),
+ &gen_save_found, &float_save_found);
+ addr += MIPS_INSTLEN;
+ }
+ }
+ gen_mask = gen_save_found;
+ float_mask = float_save_found;
+ }
-/* This fencepost looks highly suspicious to me. Removing it also
- seems suspicious as it could affect remote debugging across serial
- lines. */
+ /* Fill in the offsets for the registers which gen_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ int ireg;
+ for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
+ if (gen_mask & 0x80000000)
+ {
+ cache->saved_regs[NUM_REGS + ireg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
+ }
-static CORE_ADDR
-heuristic_proc_start (CORE_ADDR pc)
-{
- CORE_ADDR start_pc;
- CORE_ADDR fence;
- int instlen;
- int seen_adjsp = 0;
+ /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse
+ order of that normally used by gcc. Therefore, we have to fetch
+ the first instruction of the function, and if it's an entry
+ instruction that saves $s0 or $s1, correct their saved addresses. */
+ if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
+ {
+ ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
+ /* entry */
+ {
+ int reg;
+ int sreg_count = (inst >> 6) & 3;
- pc = ADDR_BITS_REMOVE (pc);
- start_pc = pc;
- fence = start_pc - heuristic_fence_post;
- if (start_pc == 0)
- return 0;
+ /* Check if the ra register was pushed on the stack. */
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ if (inst & 0x20)
+ reg_position -= mips_abi_regsize (gdbarch);
- if (heuristic_fence_post == UINT_MAX
- || fence < VM_MIN_ADDRESS)
- fence = VM_MIN_ADDRESS;
+ /* Check if the s0 and s1 registers were pushed on the
+ stack. */
+ /* NOTE: cagney/2004-02-08: Huh? This is doing no such
+ check. */
+ for (reg = 16; reg < sreg_count + 16; reg++)
+ {
+ cache->saved_regs[NUM_REGS + reg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
+ }
+ }
- instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+ /* Fill in the offsets for the registers which float_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_FREG_OFFSET (proc_desc));
+ int ireg;
+ /* Fill in the offsets for the float registers which float_mask
+ says were saved. */
+ for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
+ if (float_mask & 0x80000000)
+ {
+ if (mips_abi_regsize (gdbarch) == 4
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ /* On a big endian 32 bit ABI, floating point registers
+ are paired to form doubles such that the most
+ significant part is in $f[N+1] and the least
+ significant in $f[N] vis: $f[N+1] ||| $f[N]. The
+ registers are also spilled as a pair and stored as a
+ double.
- /* search back for previous return */
- for (start_pc -= instlen;; start_pc -= instlen)
- if (start_pc < fence)
- {
- /* It's not clear to me why we reach this point when
- stop_soon, but with this test, at least we
- don't print out warnings for every child forked (eg, on
- decstation). 22apr93 rich@cygnus.com. */
- if (stop_soon == NO_STOP_QUIETLY)
- {
- static int blurb_printed = 0;
+ When little-endian the least significant part is
+ stored first leading to the memory order $f[N] and
+ then $f[N+1].
- warning ("Warning: GDB can't find the start of the function at 0x%s.",
- paddr_nz (pc));
+ Unfortunately, when big-endian the most significant
+ part of the double is stored first, and the least
+ significant is stored second. This leads to the
+ registers being ordered in memory as firt $f[N+1] and
+ then $f[N].
+
+ For the big-endian case make certain that the
+ addresses point at the correct (swapped) locations
+ $f[N] and $f[N+1] pair (keep in mind that
+ reg_position is decremented each time through the
+ loop). */
+ if ((ireg & 1))
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position - mips_abi_regsize (gdbarch);
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position + mips_abi_regsize (gdbarch);
+ }
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
- if (!blurb_printed)
- {
- /* This actually happens frequently in embedded
- development, when you first connect to a board
- and your stack pointer and pc are nowhere in
- particular. This message needs to give people
- in that situation enough information to
- determine that it's no big deal. */
- printf_filtered ("\n\
- GDB is unable to find the start of the function at 0x%s\n\
-and thus can't determine the size of that function's stack frame.\n\
-This means that GDB may be unable to access that stack frame, or\n\
-the frames below it.\n\
- This problem is most likely caused by an invalid program counter or\n\
-stack pointer.\n\
- However, if you think GDB should simply search farther back\n\
-from 0x%s for code which looks like the beginning of a\n\
-function, you can increase the range of the search using the `set\n\
-heuristic-fence-post' command.\n",
- paddr_nz (pc), paddr_nz (pc));
- blurb_printed = 1;
- }
- }
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc]
+ = cache->saved_regs[NUM_REGS + RA_REGNUM];
+ }
- return 0;
- }
- else if (pc_is_mips16 (start_pc))
- {
- unsigned short inst;
+ /* SP_REGNUM, contains the value and not the address. */
+ trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
- /* On MIPS16, any one of the following is likely to be the
- start of a function:
- entry
- addiu sp,-n
- daddiu sp,-n
- extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */
- inst = mips_fetch_instruction (start_pc);
- if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
- || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
- || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
- || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
- break;
- else if ((inst & 0xff00) == 0x6300 /* addiu sp */
- || (inst & 0xff00) == 0xfb00) /* daddiu sp */
- seen_adjsp = 1;
- else
- seen_adjsp = 0;
- }
- else if (mips_about_to_return (start_pc))
- {
- start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
- break;
- }
+ return (*this_cache);
+}
- return start_pc;
+static void
+mips_insn16_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
+ this_cache);
+ (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
}
-/* Fetch the immediate value from a MIPS16 instruction.
- If the previous instruction was an EXTEND, use it to extend
- the upper bits of the immediate value. This is a helper function
- for mips16_heuristic_proc_desc. */
+static void
+mips_insn16_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
+ this_cache);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
-static int
-mips16_get_imm (unsigned short prev_inst, /* previous instruction */
- unsigned short inst, /* current instruction */
- int nbits, /* number of bits in imm field */
- int scale, /* scale factor to be applied to imm */
- int is_signed) /* is the imm field signed? */
+static const struct frame_unwind mips_insn16_frame_unwind =
{
- int offset;
+ NORMAL_FRAME,
+ mips_insn16_frame_this_id,
+ mips_insn16_frame_prev_register
+};
- if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */
- {
- offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0);
- if (offset & 0x8000) /* check for negative extend */
- offset = 0 - (0x10000 - (offset & 0xffff));
- return offset | (inst & 0x1f);
- }
- else
- {
- int max_imm = 1 << nbits;
- int mask = max_imm - 1;
- int sign_bit = max_imm >> 1;
+static const struct frame_unwind *
+mips_insn16_frame_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ if (pc_is_mips16 (pc))
+ return &mips_insn16_frame_unwind;
+ return NULL;
+}
- offset = inst & mask;
- if (is_signed && (offset & sign_bit))
- offset = 0 - (max_imm - offset);
- return offset * scale;
- }
+static CORE_ADDR
+mips_insn16_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
+{
+ struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
+ this_cache);
+ return info->base;
}
+static const struct frame_base mips_insn16_frame_base =
+{
+ &mips_insn16_frame_unwind,
+ mips_insn16_frame_base_address,
+ mips_insn16_frame_base_address,
+ mips_insn16_frame_base_address
+};
-/* Fill in values in temp_proc_desc based on the MIPS16 instruction
- stream from start_pc to limit_pc. */
+static const struct frame_base *
+mips_insn16_frame_base_sniffer (struct frame_info *next_frame)
+{
+ if (mips_insn16_frame_sniffer (next_frame) != NULL)
+ return &mips_insn16_frame_base;
+ else
+ return NULL;
+}
-static void
-mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
- struct frame_info *next_frame, CORE_ADDR sp)
+/* Heuristic unwinder for procedures using 32-bit instructions (covers
+ both 32-bit and 64-bit MIPS ISAs). Procedures using 16-bit
+ instructions (a.k.a. MIPS16) are handled by the mips_insn16
+ unwinder. */
+
+static struct mips_frame_cache *
+mips_insn32_frame_cache (struct frame_info *next_frame, void **this_cache)
{
- CORE_ADDR cur_pc;
- CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */
- unsigned short prev_inst = 0; /* saved copy of previous instruction */
- unsigned inst = 0; /* current instruction */
- unsigned entry_inst = 0; /* the entry instruction */
- int reg, offset;
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ mips_extra_func_info_t proc_desc;
+ struct mips_frame_cache *cache;
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ /* r0 bit means kernel trap */
+ int kernel_trap;
+ /* What registers have been saved? Bitmasks. */
+ unsigned long gen_mask, float_mask;
- PROC_FRAME_OFFSET (&temp_proc_desc) = 0; /* size of stack frame */
- PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN)
+ /* Get the mdebug proc descriptor. */
+ proc_desc = find_proc_desc (frame_pc_unwind (next_frame), next_frame, 1);
+ if (proc_desc == NULL)
+ /* I'm not sure how/whether this can happen. Normally when we
+ can't find a proc_desc, we "synthesize" one using
+ heuristic_proc_desc and set the saved_regs right away. */
+ return cache;
+
+ /* Extract the frame's base. */
+ cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
+ + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
+
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
+ float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
+
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc))
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we
+ better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
{
- /* Save the previous instruction. If it's an EXTEND, we'll extract
- the immediate offset extension from it in mips16_get_imm. */
- prev_inst = inst;
+ /* We need to figure out whether the registers that the
+ proc_desc claims are saved have been saved yet. */
- /* Fetch and decode the instruction. */
- inst = (unsigned short) mips_fetch_instruction (cur_pc);
- if ((inst & 0xff00) == 0x6300 /* addiu sp */
- || (inst & 0xff00) == 0xfb00) /* daddiu sp */
- {
- offset = mips16_get_imm (prev_inst, inst, 8, 8, 1);
- if (offset < 0) /* negative stack adjustment? */
- PROC_FRAME_OFFSET (&temp_proc_desc) -= offset;
- else
- /* Exit loop if a positive stack adjustment is found, which
- usually means that the stack cleanup code in the function
- epilogue is reached. */
- break;
- }
- else if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
- {
- offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
- reg = mips16_to_32_reg[(inst & 0x700) >> 8];
- PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
- set_reg_offset (temp_saved_regs, reg, sp + offset);
- }
- else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
- {
- offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
- reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
- set_reg_offset (temp_saved_regs, reg, sp + offset);
- }
- else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
- {
- offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
- PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
- set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
- }
- else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
- {
- offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
- PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
- set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
- }
- else if (inst == 0x673d) /* move $s1, $sp */
- {
- frame_addr = sp;
- PROC_FRAME_REG (&temp_proc_desc) = 17;
- }
- else if ((inst & 0xff00) == 0x0100) /* addiu $s1,sp,n */
- {
- offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
- frame_addr = sp + offset;
- PROC_FRAME_REG (&temp_proc_desc) = 17;
- PROC_FRAME_ADJUST (&temp_proc_desc) = offset;
- }
- else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */
- {
- offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
- reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
- }
- else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
- {
- offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
- reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
- }
- else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
- entry_inst = inst; /* save for later processing */
- else if ((inst & 0xf800) == 0x1800) /* jal(x) */
- cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */
- }
-
- /* The entry instruction is typically the first instruction in a function,
- and it stores registers at offsets relative to the value of the old SP
- (before the prologue). But the value of the sp parameter to this
- function is the new SP (after the prologue has been executed). So we
- can't calculate those offsets until we've seen the entire prologue,
- and can calculate what the old SP must have been. */
- if (entry_inst != 0)
- {
- int areg_count = (entry_inst >> 8) & 7;
- int sreg_count = (entry_inst >> 6) & 3;
-
- /* The entry instruction always subtracts 32 from the SP. */
- PROC_FRAME_OFFSET (&temp_proc_desc) += 32;
+ CORE_ADDR addr;
- /* Now we can calculate what the SP must have been at the
- start of the function prologue. */
- sp += PROC_FRAME_OFFSET (&temp_proc_desc);
+ /* Bitmasks; set if we have found a save for the register. */
+ unsigned long gen_save_found = 0;
+ unsigned long float_save_found = 0;
+ int mips16;
- /* Check if a0-a3 were saved in the caller's argument save area. */
- for (reg = 4, offset = 0; reg < areg_count + 4; reg++)
- {
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, sp + offset);
- offset += mips_saved_regsize (tdep);
- }
+ /* If the address is odd, assume this is MIPS16 code. */
+ addr = PROC_LOW_ADDR (proc_desc);
+ mips16 = pc_is_mips16 (addr);
- /* Check if the ra register was pushed on the stack. */
- offset = -4;
- if (entry_inst & 0x20)
+ /* Scan through this function's instructions preceding the
+ current PC, and look for those that save registers. */
+ while (addr < frame_pc_unwind (next_frame))
{
- PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM;
- set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
- offset -= mips_saved_regsize (tdep);
+ if (mips16)
+ {
+ mips16_decode_reg_save (mips16_fetch_instruction (addr),
+ &gen_save_found);
+ addr += MIPS16_INSTLEN;
+ }
+ else
+ {
+ mips32_decode_reg_save (mips32_fetch_instruction (addr),
+ &gen_save_found, &float_save_found);
+ addr += MIPS_INSTLEN;
+ }
}
+ gen_mask = gen_save_found;
+ float_mask = float_save_found;
+ }
- /* Check if the s0 and s1 registers were pushed on the stack. */
- for (reg = 16; reg < sreg_count + 16; reg++)
+ /* Fill in the offsets for the registers which gen_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ int ireg;
+ for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
+ if (gen_mask & 0x80000000)
{
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, sp + offset);
- offset -= mips_saved_regsize (tdep);
+ cache->saved_regs[NUM_REGS + ireg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
- }
-}
+ }
-static void
-mips32_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
- struct frame_info *next_frame, CORE_ADDR sp)
-{
- CORE_ADDR cur_pc;
- CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
-restart:
- temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
- memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
- PROC_FRAME_OFFSET (&temp_proc_desc) = 0;
- PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
- for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN)
+ /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse
+ order of that normally used by gcc. Therefore, we have to fetch
+ the first instruction of the function, and if it's an entry
+ instruction that saves $s0 or $s1, correct their saved addresses. */
+ if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
{
- unsigned long inst, high_word, low_word;
- int reg;
-
- /* Fetch the instruction. */
- inst = (unsigned long) mips_fetch_instruction (cur_pc);
+ ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
+ /* entry */
+ {
+ int reg;
+ int sreg_count = (inst >> 6) & 3;
- /* Save some code by pre-extracting some useful fields. */
- high_word = (inst >> 16) & 0xffff;
- low_word = inst & 0xffff;
- reg = high_word & 0x1f;
+ /* Check if the ra register was pushed on the stack. */
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ if (inst & 0x20)
+ reg_position -= mips_abi_regsize (gdbarch);
- if (high_word == 0x27bd /* addiu $sp,$sp,-i */
- || high_word == 0x23bd /* addi $sp,$sp,-i */
- || high_word == 0x67bd) /* daddiu $sp,$sp,-i */
- {
- if (low_word & 0x8000) /* negative stack adjustment? */
- PROC_FRAME_OFFSET (&temp_proc_desc) += 0x10000 - low_word;
- else
- /* Exit loop if a positive stack adjustment is found, which
- usually means that the stack cleanup code in the function
- epilogue is reached. */
- break;
- }
- else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
- {
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, sp + low_word);
- }
- else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
- {
- /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra,
- but the register size used is only 32 bits. Make the address
- for the saved register point to the lower 32 bits. */
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, sp + low_word + 8 - mips_regsize (current_gdbarch));
- }
- else if (high_word == 0x27be) /* addiu $30,$sp,size */
- {
- /* Old gcc frame, r30 is virtual frame pointer. */
- if ((long) low_word != PROC_FRAME_OFFSET (&temp_proc_desc))
- frame_addr = sp + low_word;
- else if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
+ /* Check if the s0 and s1 registers were pushed on the
+ stack. */
+ /* NOTE: cagney/2004-02-08: Huh? This is doing no such
+ check. */
+ for (reg = 16; reg < sreg_count + 16; reg++)
{
- unsigned alloca_adjust;
- PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
- alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
- if (alloca_adjust > 0)
- {
- /* FP > SP + frame_size. This may be because
- * of an alloca or somethings similar.
- * Fix sp to "pre-alloca" value, and try again.
- */
- sp += alloca_adjust;
- goto restart;
- }
+ cache->saved_regs[NUM_REGS + reg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
}
- /* move $30,$sp. With different versions of gas this will be either
- `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
- Accept any one of these. */
- else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+ }
+
+ /* Fill in the offsets for the registers which float_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_FREG_OFFSET (proc_desc));
+ int ireg;
+ /* Fill in the offsets for the float registers which float_mask
+ says were saved. */
+ for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
+ if (float_mask & 0x80000000)
{
- /* New gcc frame, virtual frame pointer is at r30 + frame_size. */
- if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
+ if (mips_abi_regsize (gdbarch) == 4
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- unsigned alloca_adjust;
- PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
- alloca_adjust = (unsigned) (frame_addr - sp);
- if (alloca_adjust > 0)
- {
- /* FP > SP + frame_size. This may be because
- * of an alloca or somethings similar.
- * Fix sp to "pre-alloca" value, and try again.
- */
- sp += alloca_adjust;
- goto restart;
- }
+ /* On a big endian 32 bit ABI, floating point registers
+ are paired to form doubles such that the most
+ significant part is in $f[N+1] and the least
+ significant in $f[N] vis: $f[N+1] ||| $f[N]. The
+ registers are also spilled as a pair and stored as a
+ double.
+
+ When little-endian the least significant part is
+ stored first leading to the memory order $f[N] and
+ then $f[N+1].
+
+ Unfortunately, when big-endian the most significant
+ part of the double is stored first, and the least
+ significant is stored second. This leads to the
+ registers being ordered in memory as firt $f[N+1] and
+ then $f[N].
+
+ For the big-endian case make certain that the
+ addresses point at the correct (swapped) locations
+ $f[N] and $f[N+1] pair (keep in mind that
+ reg_position is decremented each time through the
+ loop). */
+ if ((ireg & 1))
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position - mips_abi_regsize (gdbarch);
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position + mips_abi_regsize (gdbarch);
}
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
}
- else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
- {
- PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
- set_reg_offset (temp_saved_regs, reg, frame_addr + low_word);
- }
- }
+
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc]
+ = cache->saved_regs[NUM_REGS + RA_REGNUM];
+ }
+
+ /* SP_REGNUM, contains the value and not the address. */
+ trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
+
+ return (*this_cache);
}
-static mips_extra_func_info_t
-heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
- struct frame_info *next_frame, int cur_frame)
+static void
+mips_insn32_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
{
- CORE_ADDR sp;
+ struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
+ this_cache);
+ (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
+}
- if (cur_frame)
- sp = read_next_frame_reg (next_frame, NUM_REGS + SP_REGNUM);
- else
- sp = 0;
-
- if (start_pc == 0)
- return NULL;
- memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc));
- temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
- memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
- PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
- PROC_FRAME_REG (&temp_proc_desc) = SP_REGNUM;
- PROC_PC_REG (&temp_proc_desc) = RA_REGNUM;
-
- if (start_pc + 200 < limit_pc)
- limit_pc = start_pc + 200;
- if (pc_is_mips16 (start_pc))
- mips16_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
- else
- mips32_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
- return &temp_proc_desc;
+static void
+mips_insn32_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
+ this_cache);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
}
-struct mips_objfile_private
+static const struct frame_unwind mips_insn32_frame_unwind =
{
- bfd_size_type size;
- char *contents;
+ NORMAL_FRAME,
+ mips_insn32_frame_this_id,
+ mips_insn32_frame_prev_register
};
-/* Global used to communicate between non_heuristic_proc_desc and
- compare_pdr_entries within qsort (). */
-static bfd *the_bfd;
-
-static int
-compare_pdr_entries (const void *a, const void *b)
+static const struct frame_unwind *
+mips_insn32_frame_sniffer (struct frame_info *next_frame)
{
- CORE_ADDR lhs = bfd_get_32 (the_bfd, (bfd_byte *) a);
- CORE_ADDR rhs = bfd_get_32 (the_bfd, (bfd_byte *) b);
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ if (! pc_is_mips16 (pc))
+ return &mips_insn32_frame_unwind;
+ return NULL;
+}
- if (lhs < rhs)
- return -1;
- else if (lhs == rhs)
- return 0;
- else
- return 1;
+static CORE_ADDR
+mips_insn32_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
+{
+ struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
+ this_cache);
+ return info->base;
}
-static mips_extra_func_info_t
-non_heuristic_proc_desc (CORE_ADDR pc, CORE_ADDR *addrptr)
+static const struct frame_base mips_insn32_frame_base =
{
- CORE_ADDR startaddr;
- mips_extra_func_info_t proc_desc;
- struct block *b = block_for_pc (pc);
- struct symbol *sym;
- struct obj_section *sec;
- struct mips_objfile_private *priv;
+ &mips_insn32_frame_unwind,
+ mips_insn32_frame_base_address,
+ mips_insn32_frame_base_address,
+ mips_insn32_frame_base_address
+};
- if (DEPRECATED_PC_IN_CALL_DUMMY (pc, 0, 0))
+static const struct frame_base *
+mips_insn32_frame_base_sniffer (struct frame_info *next_frame)
+{
+ if (mips_insn32_frame_sniffer (next_frame) != NULL)
+ return &mips_insn32_frame_base;
+ else
return NULL;
+}
- find_pc_partial_function (pc, NULL, &startaddr, NULL);
- if (addrptr)
- *addrptr = startaddr;
-
- priv = NULL;
+static struct trad_frame_cache *
+mips_stub_frame_cache (struct frame_info *next_frame, void **this_cache)
+{
+ CORE_ADDR pc;
+ CORE_ADDR start_addr;
+ CORE_ADDR stack_addr;
+ struct trad_frame_cache *this_trad_cache;
- sec = find_pc_section (pc);
- if (sec != NULL)
- {
- priv = (struct mips_objfile_private *) sec->objfile->obj_private;
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ this_trad_cache = trad_frame_cache_zalloc (next_frame);
+ (*this_cache) = this_trad_cache;
- /* Search the ".pdr" section generated by GAS. This includes most of
- the information normally found in ECOFF PDRs. */
+ /* The return address is in the link register. */
+ trad_frame_set_reg_realreg (this_trad_cache, PC_REGNUM, RA_REGNUM);
- the_bfd = sec->objfile->obfd;
- if (priv == NULL
- && (the_bfd->format == bfd_object
- && bfd_get_flavour (the_bfd) == bfd_target_elf_flavour
- && elf_elfheader (the_bfd)->e_ident[EI_CLASS] == ELFCLASS64))
- {
- /* Right now GAS only outputs the address as a four-byte sequence.
- This means that we should not bother with this method on 64-bit
- targets (until that is fixed). */
+ /* Frame ID, since it's a frameless / stackless function, no stack
+ space is allocated and SP on entry is the current SP. */
+ pc = frame_pc_unwind (next_frame);
+ find_pc_partial_function (pc, NULL, &start_addr, NULL);
+ stack_addr = frame_unwind_register_signed (next_frame, SP_REGNUM);
+ trad_frame_set_id (this_trad_cache, frame_id_build (start_addr, stack_addr));
- priv = obstack_alloc (& sec->objfile->psymbol_obstack,
- sizeof (struct mips_objfile_private));
- priv->size = 0;
- sec->objfile->obj_private = priv;
- }
- else if (priv == NULL)
- {
- asection *bfdsec;
+ /* Assume that the frame's base is the same as the
+ stack-pointer. */
+ trad_frame_set_this_base (this_trad_cache, stack_addr);
- priv = obstack_alloc (& sec->objfile->psymbol_obstack,
- sizeof (struct mips_objfile_private));
+ return this_trad_cache;
+}
- bfdsec = bfd_get_section_by_name (sec->objfile->obfd, ".pdr");
- if (bfdsec != NULL)
- {
- priv->size = bfd_section_size (sec->objfile->obfd, bfdsec);
- priv->contents = obstack_alloc (& sec->objfile->psymbol_obstack,
- priv->size);
- bfd_get_section_contents (sec->objfile->obfd, bfdsec,
- priv->contents, 0, priv->size);
+static void
+mips_stub_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (next_frame, this_cache);
+ trad_frame_get_id (this_trad_cache, this_id);
+}
- /* In general, the .pdr section is sorted. However, in the
- presence of multiple code sections (and other corner cases)
- it can become unsorted. Sort it so that we can use a faster
- binary search. */
- qsort (priv->contents, priv->size / 32, 32, compare_pdr_entries);
- }
- else
- priv->size = 0;
+static void
+mips_stub_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (next_frame, this_cache);
+ trad_frame_get_register (this_trad_cache, next_frame, regnum, optimizedp,
+ lvalp, addrp, realnump, valuep);
+}
- sec->objfile->obj_private = priv;
- }
- the_bfd = NULL;
+static const struct frame_unwind mips_stub_frame_unwind =
+{
+ NORMAL_FRAME,
+ mips_stub_frame_this_id,
+ mips_stub_frame_prev_register
+};
- if (priv->size != 0)
- {
- int low, mid, high;
- char *ptr;
+static const struct frame_unwind *
+mips_stub_frame_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ if (in_plt_section (pc, NULL))
+ return &mips_stub_frame_unwind;
+ else
+ return NULL;
+}
- low = 0;
- high = priv->size / 32;
+static CORE_ADDR
+mips_stub_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (next_frame, this_cache);
+ return trad_frame_get_this_base (this_trad_cache);
+}
- do
- {
- CORE_ADDR pdr_pc;
+static const struct frame_base mips_stub_frame_base =
+{
+ &mips_stub_frame_unwind,
+ mips_stub_frame_base_address,
+ mips_stub_frame_base_address,
+ mips_stub_frame_base_address
+};
- mid = (low + high) / 2;
+static const struct frame_base *
+mips_stub_frame_base_sniffer (struct frame_info *next_frame)
+{
+ if (mips_stub_frame_sniffer (next_frame) != NULL)
+ return &mips_stub_frame_base;
+ else
+ return NULL;
+}
- ptr = priv->contents + mid * 32;
- pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
- pdr_pc += ANOFFSET (sec->objfile->section_offsets,
- SECT_OFF_TEXT (sec->objfile));
- if (pdr_pc == startaddr)
- break;
- if (pdr_pc > startaddr)
- high = mid;
- else
- low = mid + 1;
- }
- while (low != high);
+static CORE_ADDR
+read_next_frame_reg (struct frame_info *fi, int regno)
+{
+ /* Always a pseudo. */
+ gdb_assert (regno >= NUM_REGS);
+ if (fi == NULL)
+ {
+ LONGEST val;
+ regcache_cooked_read_signed (current_regcache, regno, &val);
+ return val;
+ }
+ else if ((regno % NUM_REGS) == MIPS_SP_REGNUM)
+ /* MIPS_SP_REGNUM is special, its value is stored in saved_regs.
+ In fact, it is so special that it can even only be fetched
+ using a raw register number! Once this code as been converted
+ to frame-unwind the problem goes away. */
+ return frame_unwind_register_signed (fi, regno % NUM_REGS);
+ else
+ return frame_unwind_register_signed (fi, regno);
- if (low != high)
- {
- struct symbol *sym = find_pc_function (pc);
+}
- /* Fill in what we need of the proc_desc. */
- proc_desc = (mips_extra_func_info_t)
- obstack_alloc (&sec->objfile->psymbol_obstack,
- sizeof (struct mips_extra_func_info));
- PROC_LOW_ADDR (proc_desc) = startaddr;
+/* mips_addr_bits_remove - remove useless address bits */
- /* Only used for dummy frames. */
- PROC_HIGH_ADDR (proc_desc) = 0;
+static CORE_ADDR
+mips_addr_bits_remove (CORE_ADDR addr)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (mips_mask_address_p (tdep) && (((ULONGEST) addr) >> 32 == 0xffffffffUL))
+ /* This hack is a work-around for existing boards using PMON, the
+ simulator, and any other 64-bit targets that doesn't have true
+ 64-bit addressing. On these targets, the upper 32 bits of
+ addresses are ignored by the hardware. Thus, the PC or SP are
+ likely to have been sign extended to all 1s by instruction
+ sequences that load 32-bit addresses. For example, a typical
+ piece of code that loads an address is this:
- PROC_FRAME_OFFSET (proc_desc)
- = bfd_get_32 (sec->objfile->obfd, ptr + 20);
- PROC_FRAME_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 24);
- PROC_FRAME_ADJUST (proc_desc) = 0;
- PROC_REG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 4);
- PROC_FREG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 12);
- PROC_REG_OFFSET (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 8);
- PROC_FREG_OFFSET (proc_desc)
- = bfd_get_32 (sec->objfile->obfd, ptr + 16);
- PROC_PC_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
- ptr + 28);
- proc_desc->pdr.isym = (long) sym;
+ lui $r2, <upper 16 bits>
+ ori $r2, <lower 16 bits>
- return proc_desc;
- }
- }
- }
+ But the lui sign-extends the value such that the upper 32 bits
+ may be all 1s. The workaround is simply to mask off these
+ bits. In the future, gcc may be changed to support true 64-bit
+ addressing, and this masking will have to be disabled. */
+ return addr &= 0xffffffffUL;
+ else
+ return addr;
+}
- if (b == NULL)
- return NULL;
+/* mips_software_single_step() is called just before we want to resume
+ the inferior, if we want to single-step it but there is no hardware
+ or kernel single-step support (MIPS on GNU/Linux for example). We find
+ the target of the coming instruction and breakpoint it.
- if (startaddr > BLOCK_START (b))
- {
- /* This is the "pathological" case referred to in a comment in
- print_frame_info. It might be better to move this check into
- symbol reading. */
- return NULL;
- }
+ single_step is also called just after the inferior stops. If we had
+ set up a simulated single-step, we undo our damage. */
- sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_DOMAIN, 0, NULL);
+void
+mips_software_single_step (enum target_signal sig, int insert_breakpoints_p)
+{
+ static CORE_ADDR next_pc;
+ typedef char binsn_quantum[BREAKPOINT_MAX];
+ static binsn_quantum break_mem;
+ CORE_ADDR pc;
- /* If we never found a PDR for this function in symbol reading, then
- examine prologues to find the information. */
- if (sym)
+ if (insert_breakpoints_p)
{
- proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym);
- if (PROC_FRAME_REG (proc_desc) == -1)
- return NULL;
- else
- return proc_desc;
+ pc = read_register (mips_regnum (current_gdbarch)->pc);
+ next_pc = mips_next_pc (pc);
+
+ target_insert_breakpoint (next_pc, break_mem);
}
else
- return NULL;
+ target_remove_breakpoint (next_pc, break_mem);
}
+static struct mips_extra_func_info temp_proc_desc;
-static mips_extra_func_info_t
-find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame)
-{
- mips_extra_func_info_t proc_desc;
- CORE_ADDR startaddr = 0;
+/* This hack will go away once the get_prev_frame() code has been
+ modified to set the frame's type first. That is BEFORE init extra
+ frame info et.al. is called. This is because it will become
+ possible to skip the init extra info call for sigtramp and dummy
+ frames. */
+static CORE_ADDR *temp_saved_regs;
- proc_desc = non_heuristic_proc_desc (pc, &startaddr);
+/* Set a register's saved stack address in temp_saved_regs. If an
+ address has already been set for this register, do nothing; this
+ way we will only recognize the first save of a given register in a
+ function prologue.
- if (proc_desc)
- {
- /* IF this is the topmost frame AND
- * (this proc does not have debugging information OR
- * the PC is in the procedure prologue)
- * THEN create a "heuristic" proc_desc (by analyzing
- * the actual code) to replace the "official" proc_desc.
- */
- if (next_frame == NULL)
- {
- struct symtab_and_line val;
- struct symbol *proc_symbol =
- PROC_DESC_IS_DUMMY (proc_desc) ? 0 : PROC_SYMBOL (proc_desc);
+ For simplicity, save the address in both [0 .. NUM_REGS) and
+ [NUM_REGS .. 2*NUM_REGS). Strictly speaking, only the second range
+ is used as it is only second range (the ABI instead of ISA
+ registers) that comes into play when finding saved registers in a
+ frame. */
- if (proc_symbol)
- {
- val = find_pc_line (BLOCK_START
- (SYMBOL_BLOCK_VALUE (proc_symbol)),
- 0);
- val.pc = val.end ? val.end : pc;
- }
- if (!proc_symbol || pc < val.pc)
- {
- mips_extra_func_info_t found_heuristic =
- heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
- pc, next_frame, cur_frame);
- if (found_heuristic)
- proc_desc = found_heuristic;
- }
- }
- }
- else
+static void
+set_reg_offset (CORE_ADDR *saved_regs, int regno, CORE_ADDR offset)
+{
+ if (saved_regs[regno] == 0)
{
- /* Is linked_proc_desc_table really necessary? It only seems to be used
- by procedure call dummys. However, the procedures being called ought
- to have their own proc_descs, and even if they don't,
- heuristic_proc_desc knows how to create them! */
-
- struct linked_proc_info *link;
-
- for (link = linked_proc_desc_table; link; link = link->next)
- if (PROC_LOW_ADDR (&link->info) <= pc
- && PROC_HIGH_ADDR (&link->info) > pc)
- return &link->info;
-
- if (startaddr == 0)
- startaddr = heuristic_proc_start (pc);
-
- proc_desc =
- heuristic_proc_desc (startaddr, pc, next_frame, cur_frame);
+ saved_regs[regno + 0 * NUM_REGS] = offset;
+ saved_regs[regno + 1 * NUM_REGS] = offset;
}
- return proc_desc;
}
-static CORE_ADDR
-get_frame_pointer (struct frame_info *frame,
- mips_extra_func_info_t proc_desc)
-{
- return (read_next_frame_reg (frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
- + PROC_FRAME_OFFSET (proc_desc)
- - PROC_FRAME_ADJUST (proc_desc));
-}
-static mips_extra_func_info_t cached_proc_desc;
+/* Test whether the PC points to the return instruction at the
+ end of a function. */
-static CORE_ADDR
-mips_frame_chain (struct frame_info *frame)
+static int
+mips_about_to_return (CORE_ADDR pc)
{
- mips_extra_func_info_t proc_desc;
- CORE_ADDR tmp;
- CORE_ADDR saved_pc = DEPRECATED_FRAME_SAVED_PC (frame);
-
- /* Check if the PC is inside a call stub. If it is, fetch the
- PC of the caller of that stub. */
- if ((tmp = SKIP_TRAMPOLINE_CODE (saved_pc)) != 0)
- saved_pc = tmp;
-
- if (DEPRECATED_PC_IN_CALL_DUMMY (saved_pc, 0, 0))
- {
- /* A dummy frame, uses SP not FP. Get the old SP value. If all
- is well, frame->frame the bottom of the current frame will
- contain that value. */
- return get_frame_base (frame);
- }
-
- /* Look up the procedure descriptor for this PC. */
- proc_desc = find_proc_desc (saved_pc, frame, 1);
- if (!proc_desc)
- return 0;
-
- cached_proc_desc = proc_desc;
-
- /* If no frame pointer and frame size is zero, we must be at end
- of stack (or otherwise hosed). If we don't check frame size,
- we loop forever if we see a zero size frame. */
- if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
- && PROC_FRAME_OFFSET (proc_desc) == 0
- /* The previous frame from a sigtramp frame might be frameless
- and have frame size zero. */
- && !(get_frame_type (frame) == SIGTRAMP_FRAME)
- /* For a generic dummy frame, let get_frame_pointer() unwind a
- register value saved as part of the dummy frame call. */
- && !(DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0)))
- return 0;
+ if (pc_is_mips16 (pc))
+ /* This mips16 case isn't necessarily reliable. Sometimes the compiler
+ generates a "jr $ra"; other times it generates code to load
+ the return address from the stack to an accessible register (such
+ as $a3), then a "jr" using that register. This second case
+ is almost impossible to distinguish from an indirect jump
+ used for switch statements, so we don't even try. */
+ return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */
else
- return get_frame_pointer (frame, proc_desc);
+ return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */
}
-static void
-mips_init_extra_frame_info (int fromleaf, struct frame_info *fci)
-{
- int regnum;
- mips_extra_func_info_t proc_desc;
- if (get_frame_type (fci) == DUMMY_FRAME)
- return;
+/* This fencepost looks highly suspicious to me. Removing it also
+ seems suspicious as it could affect remote debugging across serial
+ lines. */
- /* Use proc_desc calculated in frame_chain. When there is no
- next frame, i.e, get_next_frame (fci) == NULL, we call
- find_proc_desc () to calculate it, passing an explicit
- NULL as the frame parameter. */
- proc_desc =
- get_next_frame (fci)
- ? cached_proc_desc
- : find_proc_desc (get_frame_pc (fci),
- NULL /* i.e, get_next_frame (fci) */,
- 1);
-
- frame_extra_info_zalloc (fci, sizeof (struct frame_extra_info));
-
- get_frame_extra_info (fci)->proc_desc =
- proc_desc == &temp_proc_desc ? 0 : proc_desc;
- if (proc_desc)
- {
- /* Fixup frame-pointer - only needed for top frame */
- /* This may not be quite right, if proc has a real frame register.
- Get the value of the frame relative sp, procedure might have been
- interrupted by a signal at it's very start. */
- if (get_frame_pc (fci) == PROC_LOW_ADDR (proc_desc)
- && !PROC_DESC_IS_DUMMY (proc_desc))
- deprecated_update_frame_base_hack (fci, read_next_frame_reg (get_next_frame (fci), NUM_REGS + SP_REGNUM));
- else if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (fci), 0, 0))
- /* Do not ``fix'' fci->frame. It will have the value of the
- generic dummy frame's top-of-stack (since the draft
- fci->frame is obtained by returning the unwound stack
- pointer) and that is what we want. That way the fci->frame
- value will match the top-of-stack value that was saved as
- part of the dummy frames data. */
- /* Do nothing. */;
- else
- deprecated_update_frame_base_hack (fci, get_frame_pointer (get_next_frame (fci), proc_desc));
+static CORE_ADDR
+heuristic_proc_start (CORE_ADDR pc)
+{
+ CORE_ADDR start_pc;
+ CORE_ADDR fence;
+ int instlen;
+ int seen_adjsp = 0;
- if (proc_desc == &temp_proc_desc)
- {
- char *name;
-
- /* Do not set the saved registers for a sigtramp frame,
- mips_find_saved_registers will do that for us. We can't
- use (get_frame_type (fci) == SIGTRAMP_FRAME), it is not
- yet set. */
- /* FIXME: cagney/2002-11-18: This problem will go away once
- frame.c:get_prev_frame() is modified to set the frame's
- type before calling functions like this. */
- find_pc_partial_function (get_frame_pc (fci), &name,
- (CORE_ADDR *) NULL, (CORE_ADDR *) NULL);
- if (!PC_IN_SIGTRAMP (get_frame_pc (fci), name))
- {
- frame_saved_regs_zalloc (fci);
- /* Set value of previous frame's stack pointer.
- Remember that saved_regs[SP_REGNUM] is special in
- that it contains the value of the stack pointer
- register. The other saved_regs values are addresses
- (in the inferior) at which a given register's value
- may be found. */
- set_reg_offset (temp_saved_regs, SP_REGNUM,
- get_frame_base (fci));
- set_reg_offset (temp_saved_regs, PC_REGNUM,
- temp_saved_regs[RA_REGNUM]);
- memcpy (deprecated_get_frame_saved_regs (fci), temp_saved_regs,
- SIZEOF_FRAME_SAVED_REGS);
- }
- }
+ pc = ADDR_BITS_REMOVE (pc);
+ start_pc = pc;
+ fence = start_pc - heuristic_fence_post;
+ if (start_pc == 0)
+ return 0;
- /* hack: if argument regs are saved, guess these contain args */
- /* assume we can't tell how many args for now */
- get_frame_extra_info (fci)->num_args = -1;
- for (regnum = MIPS_LAST_ARG_REGNUM; regnum >= A0_REGNUM; regnum--)
- {
- if (PROC_REG_MASK (proc_desc) & (1 << regnum))
- {
- get_frame_extra_info (fci)->num_args = regnum - A0_REGNUM + 1;
- break;
- }
- }
- }
-}
+ if (heuristic_fence_post == UINT_MAX || fence < VM_MIN_ADDRESS)
+ fence = VM_MIN_ADDRESS;
-/* MIPS stack frames are almost impenetrable. When execution stops,
- we basically have to look at symbol information for the function
- that we stopped in, which tells us *which* register (if any) is
- the base of the frame pointer, and what offset from that register
- the frame itself is at.
+ instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
- This presents a problem when trying to examine a stack in memory
- (that isn't executing at the moment), using the "frame" command. We
- don't have a PC, nor do we have any registers except SP.
+ /* search back for previous return */
+ for (start_pc -= instlen;; start_pc -= instlen)
+ if (start_pc < fence)
+ {
+ /* It's not clear to me why we reach this point when
+ stop_soon, but with this test, at least we
+ don't print out warnings for every child forked (eg, on
+ decstation). 22apr93 rich@cygnus.com. */
+ if (stop_soon == NO_STOP_QUIETLY)
+ {
+ static int blurb_printed = 0;
- This routine takes two arguments, SP and PC, and tries to make the
- cached frames look as if these two arguments defined a frame on the
- cache. This allows the rest of info frame to extract the important
- arguments without difficulty. */
+ warning ("GDB can't find the start of the function at 0x%s.",
+ paddr_nz (pc));
-struct frame_info *
-setup_arbitrary_frame (int argc, CORE_ADDR *argv)
-{
- if (argc != 2)
- error ("MIPS frame specifications require two arguments: sp and pc");
+ if (!blurb_printed)
+ {
+ /* This actually happens frequently in embedded
+ development, when you first connect to a board
+ and your stack pointer and pc are nowhere in
+ particular. This message needs to give people
+ in that situation enough information to
+ determine that it's no big deal. */
+ printf_filtered ("\n\
+ GDB is unable to find the start of the function at 0x%s\n\
+and thus can't determine the size of that function's stack frame.\n\
+This means that GDB may be unable to access that stack frame, or\n\
+the frames below it.\n\
+ This problem is most likely caused by an invalid program counter or\n\
+stack pointer.\n\
+ However, if you think GDB should simply search farther back\n\
+from 0x%s for code which looks like the beginning of a\n\
+function, you can increase the range of the search using the `set\n\
+heuristic-fence-post' command.\n", paddr_nz (pc), paddr_nz (pc));
+ blurb_printed = 1;
+ }
+ }
- return create_new_frame (argv[0], argv[1]);
-}
+ return 0;
+ }
+ else if (pc_is_mips16 (start_pc))
+ {
+ unsigned short inst;
-/* According to the current ABI, should the type be passed in a
- floating-point register (assuming that there is space)? When there
- is no FPU, FP are not even considered as possibile candidates for
- FP registers and, consequently this returns false - forces FP
- arguments into integer registers. */
+ /* On MIPS16, any one of the following is likely to be the
+ start of a function:
+ entry
+ addiu sp,-n
+ daddiu sp,-n
+ extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */
+ inst = mips_fetch_instruction (start_pc);
+ if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
+ || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
+ || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
+ break;
+ else if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ seen_adjsp = 1;
+ else
+ seen_adjsp = 0;
+ }
+ else if (mips_about_to_return (start_pc))
+ {
+ start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
+ break;
+ }
-static int
-fp_register_arg_p (enum type_code typecode, struct type *arg_type)
-{
- return ((typecode == TYPE_CODE_FLT
- || (MIPS_EABI
- && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
- && TYPE_NFIELDS (arg_type) == 1
- && TYPE_CODE (TYPE_FIELD_TYPE (arg_type, 0)) == TYPE_CODE_FLT))
- && MIPS_FPU_TYPE != MIPS_FPU_NONE);
+ return start_pc;
}
-/* On o32, argument passing in GPRs depends on the alignment of the type being
- passed. Return 1 if this type must be aligned to a doubleword boundary. */
+/* Fetch the immediate value from a MIPS16 instruction.
+ If the previous instruction was an EXTEND, use it to extend
+ the upper bits of the immediate value. This is a helper function
+ for mips16_heuristic_proc_desc. */
static int
-mips_type_needs_double_align (struct type *type)
+mips16_get_imm (unsigned short prev_inst, /* previous instruction */
+ unsigned short inst, /* current instruction */
+ int nbits, /* number of bits in imm field */
+ int scale, /* scale factor to be applied to imm */
+ int is_signed) /* is the imm field signed? */
{
- enum type_code typecode = TYPE_CODE (type);
+ int offset;
- if (typecode == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8)
- return 1;
- else if (typecode == TYPE_CODE_STRUCT)
+ if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */
{
- if (TYPE_NFIELDS (type) < 1)
- return 0;
- return mips_type_needs_double_align (TYPE_FIELD_TYPE (type, 0));
+ offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0);
+ if (offset & 0x8000) /* check for negative extend */
+ offset = 0 - (0x10000 - (offset & 0xffff));
+ return offset | (inst & 0x1f);
}
- else if (typecode == TYPE_CODE_UNION)
+ else
{
- int i, n;
+ int max_imm = 1 << nbits;
+ int mask = max_imm - 1;
+ int sign_bit = max_imm >> 1;
- n = TYPE_NFIELDS (type);
- for (i = 0; i < n; i++)
- if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i)))
- return 1;
- return 0;
+ offset = inst & mask;
+ if (is_signed && (offset & sign_bit))
+ offset = 0 - (max_imm - offset);
+ return offset * scale;
}
- return 0;
}
-/* Adjust the address downward (direction of stack growth) so that it
- is correctly aligned for a new stack frame. */
-static CORE_ADDR
-mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
-{
- return align_down (addr, 16);
-}
-static CORE_ADDR
-mips_eabi_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
- struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
- struct value **args, CORE_ADDR sp, int struct_return,
- CORE_ADDR struct_addr)
-{
+/* Fill in values in temp_proc_desc based on the MIPS16 instruction
+ stream from start_pc to limit_pc. */
+
+static void
+mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *next_frame, CORE_ADDR sp)
+{
+ CORE_ADDR cur_pc;
+ CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */
+ unsigned short prev_inst = 0; /* saved copy of previous instruction */
+ unsigned inst = 0; /* current instruction */
+ unsigned entry_inst = 0; /* the entry instruction */
+ int reg, offset;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ PROC_FRAME_OFFSET (&temp_proc_desc) = 0; /* size of stack frame */
+ PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
+
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN)
+ {
+ /* Save the previous instruction. If it's an EXTEND, we'll extract
+ the immediate offset extension from it in mips16_get_imm. */
+ prev_inst = inst;
+
+ /* Fetch and decode the instruction. */
+ inst = (unsigned short) mips_fetch_instruction (cur_pc);
+ if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 8, 1);
+ if (offset < 0) /* negative stack adjustment? */
+ PROC_FRAME_OFFSET (&temp_proc_desc) -= offset;
+ else
+ /* Exit loop if a positive stack adjustment is found, which
+ usually means that the stack cleanup code in the function
+ epilogue is reached. */
+ break;
+ }
+ else if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ reg = mips16_to_32_reg[(inst & 0x700) >> 8];
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
+ }
+ else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
+ }
+ else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
+ }
+ else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
+ }
+ else if (inst == 0x673d) /* move $s1, $sp */
+ {
+ frame_addr = sp;
+ PROC_FRAME_REG (&temp_proc_desc) = 17;
+ }
+ else if ((inst & 0xff00) == 0x0100) /* addiu $s1,sp,n */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+ frame_addr = sp + offset;
+ PROC_FRAME_REG (&temp_proc_desc) = 17;
+ PROC_FRAME_ADJUST (&temp_proc_desc) = offset;
+ }
+ else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
+ }
+ else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
+ {
+ offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
+ reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, frame_addr + offset);
+ }
+ else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ entry_inst = inst; /* save for later processing */
+ else if ((inst & 0xf800) == 0x1800) /* jal(x) */
+ cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */
+ }
+
+ /* The entry instruction is typically the first instruction in a function,
+ and it stores registers at offsets relative to the value of the old SP
+ (before the prologue). But the value of the sp parameter to this
+ function is the new SP (after the prologue has been executed). So we
+ can't calculate those offsets until we've seen the entire prologue,
+ and can calculate what the old SP must have been. */
+ if (entry_inst != 0)
+ {
+ int areg_count = (entry_inst >> 8) & 7;
+ int sreg_count = (entry_inst >> 6) & 3;
+
+ /* The entry instruction always subtracts 32 from the SP. */
+ PROC_FRAME_OFFSET (&temp_proc_desc) += 32;
+
+ /* Now we can calculate what the SP must have been at the
+ start of the function prologue. */
+ sp += PROC_FRAME_OFFSET (&temp_proc_desc);
+
+ /* Check if a0-a3 were saved in the caller's argument save area. */
+ for (reg = 4, offset = 0; reg < areg_count + 4; reg++)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
+ offset += mips_abi_regsize (current_gdbarch);
+ }
+
+ /* Check if the ra register was pushed on the stack. */
+ offset = -4;
+ if (entry_inst & 0x20)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM;
+ set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset);
+ offset -= mips_abi_regsize (current_gdbarch);
+ }
+
+ /* Check if the s0 and s1 registers were pushed on the stack. */
+ for (reg = 16; reg < sreg_count + 16; reg++)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, sp + offset);
+ offset -= mips_abi_regsize (current_gdbarch);
+ }
+ }
+}
+
+static void
+mips32_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *next_frame, CORE_ADDR sp)
+{
+ CORE_ADDR cur_pc;
+ CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
+restart:
+ temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
+ memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
+ PROC_FRAME_OFFSET (&temp_proc_desc) = 0;
+ PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
+ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN)
+ {
+ unsigned long inst, high_word, low_word;
+ int reg;
+
+ /* Fetch the instruction. */
+ inst = (unsigned long) mips_fetch_instruction (cur_pc);
+
+ /* Save some code by pre-extracting some useful fields. */
+ high_word = (inst >> 16) & 0xffff;
+ low_word = inst & 0xffff;
+ reg = high_word & 0x1f;
+
+ if (high_word == 0x27bd /* addiu $sp,$sp,-i */
+ || high_word == 0x23bd /* addi $sp,$sp,-i */
+ || high_word == 0x67bd) /* daddiu $sp,$sp,-i */
+ {
+ if (low_word & 0x8000) /* negative stack adjustment? */
+ PROC_FRAME_OFFSET (&temp_proc_desc) += 0x10000 - low_word;
+ else
+ /* Exit loop if a positive stack adjustment is found, which
+ usually means that the stack cleanup code in the function
+ epilogue is reached. */
+ break;
+ }
+ else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, sp + low_word);
+ }
+ else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
+ {
+ /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and
+ $ra. */
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, sp + low_word);
+ }
+ else if (high_word == 0x27be) /* addiu $30,$sp,size */
+ {
+ /* Old gcc frame, r30 is virtual frame pointer. */
+ if ((long) low_word != PROC_FRAME_OFFSET (&temp_proc_desc))
+ frame_addr = sp + low_word;
+ else if (PROC_FRAME_REG (&temp_proc_desc) == MIPS_SP_REGNUM)
+ {
+ unsigned alloca_adjust;
+ PROC_FRAME_REG (&temp_proc_desc) = 30;
+ frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
+ alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
+ if (alloca_adjust > 0)
+ {
+ /* FP > SP + frame_size. This may be because
+ * of an alloca or somethings similar.
+ * Fix sp to "pre-alloca" value, and try again.
+ */
+ sp += alloca_adjust;
+ goto restart;
+ }
+ }
+ }
+ /* move $30,$sp. With different versions of gas this will be either
+ `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
+ Accept any one of these. */
+ else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+ {
+ /* New gcc frame, virtual frame pointer is at r30 + frame_size. */
+ if (PROC_FRAME_REG (&temp_proc_desc) == MIPS_SP_REGNUM)
+ {
+ unsigned alloca_adjust;
+ PROC_FRAME_REG (&temp_proc_desc) = 30;
+ frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30);
+ alloca_adjust = (unsigned) (frame_addr - sp);
+ if (alloca_adjust > 0)
+ {
+ /* FP > SP + frame_size. This may be because
+ * of an alloca or somethings similar.
+ * Fix sp to "pre-alloca" value, and try again.
+ */
+ sp += alloca_adjust;
+ goto restart;
+ }
+ }
+ }
+ else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (temp_saved_regs, reg, frame_addr + low_word);
+ }
+ }
+}
+
+static mips_extra_func_info_t
+heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *next_frame, int cur_frame)
+{
+ CORE_ADDR sp;
+
+ if (cur_frame)
+ sp = read_next_frame_reg (next_frame, NUM_REGS + MIPS_SP_REGNUM);
+ else
+ sp = 0;
+
+ if (start_pc == 0)
+ return NULL;
+ memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc));
+ temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
+ memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
+ PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
+ PROC_FRAME_REG (&temp_proc_desc) = MIPS_SP_REGNUM;
+ PROC_PC_REG (&temp_proc_desc) = RA_REGNUM;
+
+ if (start_pc + 200 < limit_pc)
+ limit_pc = start_pc + 200;
+ if (pc_is_mips16 (start_pc))
+ mips16_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+ else
+ mips32_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+ return &temp_proc_desc;
+}
+
+struct mips_objfile_private
+{
+ bfd_size_type size;
+ char *contents;
+};
+
+/* Global used to communicate between non_heuristic_proc_desc and
+ compare_pdr_entries within qsort (). */
+static bfd *the_bfd;
+
+static int
+compare_pdr_entries (const void *a, const void *b)
+{
+ CORE_ADDR lhs = bfd_get_32 (the_bfd, (bfd_byte *) a);
+ CORE_ADDR rhs = bfd_get_32 (the_bfd, (bfd_byte *) b);
+
+ if (lhs < rhs)
+ return -1;
+ else if (lhs == rhs)
+ return 0;
+ else
+ return 1;
+}
+
+static mips_extra_func_info_t
+non_heuristic_proc_desc (CORE_ADDR pc, CORE_ADDR *addrptr)
+{
+ CORE_ADDR startaddr;
+ mips_extra_func_info_t proc_desc;
+ struct block *b = block_for_pc (pc);
+ struct symbol *sym;
+ struct obj_section *sec;
+ struct mips_objfile_private *priv;
+
+ find_pc_partial_function (pc, NULL, &startaddr, NULL);
+ if (addrptr)
+ *addrptr = startaddr;
+
+ priv = NULL;
+
+ sec = find_pc_section (pc);
+ if (sec != NULL)
+ {
+ priv = (struct mips_objfile_private *) objfile_data (sec->objfile, mips_pdr_data);
+
+ /* Search the ".pdr" section generated by GAS. This includes most of
+ the information normally found in ECOFF PDRs. */
+
+ the_bfd = sec->objfile->obfd;
+ if (priv == NULL
+ && (the_bfd->format == bfd_object
+ && bfd_get_flavour (the_bfd) == bfd_target_elf_flavour
+ && elf_elfheader (the_bfd)->e_ident[EI_CLASS] == ELFCLASS64))
+ {
+ /* Right now GAS only outputs the address as a four-byte sequence.
+ This means that we should not bother with this method on 64-bit
+ targets (until that is fixed). */
+
+ priv = obstack_alloc (&sec->objfile->objfile_obstack,
+ sizeof (struct mips_objfile_private));
+ priv->size = 0;
+ set_objfile_data (sec->objfile, mips_pdr_data, priv);
+ }
+ else if (priv == NULL)
+ {
+ asection *bfdsec;
+
+ priv = obstack_alloc (&sec->objfile->objfile_obstack,
+ sizeof (struct mips_objfile_private));
+
+ bfdsec = bfd_get_section_by_name (sec->objfile->obfd, ".pdr");
+ if (bfdsec != NULL)
+ {
+ priv->size = bfd_section_size (sec->objfile->obfd, bfdsec);
+ priv->contents = obstack_alloc (&sec->objfile->objfile_obstack,
+ priv->size);
+ bfd_get_section_contents (sec->objfile->obfd, bfdsec,
+ priv->contents, 0, priv->size);
+
+ /* In general, the .pdr section is sorted. However, in the
+ presence of multiple code sections (and other corner cases)
+ it can become unsorted. Sort it so that we can use a faster
+ binary search. */
+ qsort (priv->contents, priv->size / 32, 32,
+ compare_pdr_entries);
+ }
+ else
+ priv->size = 0;
+
+ set_objfile_data (sec->objfile, mips_pdr_data, priv);
+ }
+ the_bfd = NULL;
+
+ if (priv->size != 0)
+ {
+ int low, mid, high;
+ char *ptr;
+ CORE_ADDR pdr_pc;
+
+ low = 0;
+ high = priv->size / 32;
+
+ /* We've found a .pdr section describing this objfile. We want to
+ find the entry which describes this code address. The .pdr
+ information is not very descriptive; we have only a function
+ start address. We have to look for the closest entry, because
+ the local symbol at the beginning of this function may have
+ been stripped - so if we ask the symbol table for the start
+ address we may get a preceding global function. */
+
+ /* First, find the last .pdr entry starting at or before PC. */
+ do
+ {
+ mid = (low + high) / 2;
+
+ ptr = priv->contents + mid * 32;
+ pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
+ pdr_pc += ANOFFSET (sec->objfile->section_offsets,
+ SECT_OFF_TEXT (sec->objfile));
+
+ if (pdr_pc > pc)
+ high = mid;
+ else
+ low = mid + 1;
+ }
+ while (low != high);
+
+ /* Both low and high point one past the PDR of interest. If
+ both are zero, that means this PC is before any region
+ covered by a PDR, i.e. pdr_pc for the first PDR entry is
+ greater than PC. */
+ if (low > 0)
+ {
+ ptr = priv->contents + (low - 1) * 32;
+ pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr);
+ pdr_pc += ANOFFSET (sec->objfile->section_offsets,
+ SECT_OFF_TEXT (sec->objfile));
+ }
+
+ /* We don't have a range, so we have no way to know for sure
+ whether we're in the correct PDR or a PDR for a preceding
+ function and the current function was a stripped local
+ symbol. But if the PDR's PC is at least as great as the
+ best guess from the symbol table, assume that it does cover
+ the right area; if a .pdr section is present at all then
+ nearly every function will have an entry. The biggest exception
+ will be the dynamic linker stubs; conveniently these are
+ placed before .text instead of after. */
+
+ if (pc >= pdr_pc && pdr_pc >= startaddr)
+ {
+ struct symbol *sym = find_pc_function (pc);
+
+ if (addrptr)
+ *addrptr = pdr_pc;
+
+ /* Fill in what we need of the proc_desc. */
+ proc_desc = (mips_extra_func_info_t)
+ obstack_alloc (&sec->objfile->objfile_obstack,
+ sizeof (struct mips_extra_func_info));
+ PROC_LOW_ADDR (proc_desc) = pdr_pc;
+
+ /* Only used for dummy frames. */
+ PROC_HIGH_ADDR (proc_desc) = 0;
+
+ PROC_FRAME_OFFSET (proc_desc)
+ = bfd_get_32 (sec->objfile->obfd, ptr + 20);
+ PROC_FRAME_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 24);
+ PROC_FRAME_ADJUST (proc_desc) = 0;
+ PROC_REG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 4);
+ PROC_FREG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 12);
+ PROC_REG_OFFSET (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 8);
+ PROC_FREG_OFFSET (proc_desc)
+ = bfd_get_32 (sec->objfile->obfd, ptr + 16);
+ PROC_PC_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd,
+ ptr + 28);
+ proc_desc->pdr.isym = (long) sym;
+
+ return proc_desc;
+ }
+ }
+ }
+
+ if (b == NULL)
+ return NULL;
+
+ if (startaddr > BLOCK_START (b))
+ {
+ /* This is the "pathological" case referred to in a comment in
+ print_frame_info. It might be better to move this check into
+ symbol reading. */
+ return NULL;
+ }
+
+ sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_DOMAIN, 0, NULL);
+
+ /* If we never found a PDR for this function in symbol reading, then
+ examine prologues to find the information. */
+ if (sym)
+ {
+ proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym);
+ if (PROC_FRAME_REG (proc_desc) == -1)
+ return NULL;
+ else
+ return proc_desc;
+ }
+ else
+ return NULL;
+}
+
+
+static mips_extra_func_info_t
+find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame)
+{
+ mips_extra_func_info_t proc_desc;
+ CORE_ADDR startaddr = 0;
+
+ proc_desc = non_heuristic_proc_desc (pc, &startaddr);
+
+ if (proc_desc)
+ {
+ /* IF this is the topmost frame AND
+ * (this proc does not have debugging information OR
+ * the PC is in the procedure prologue)
+ * THEN create a "heuristic" proc_desc (by analyzing
+ * the actual code) to replace the "official" proc_desc.
+ */
+ if (next_frame == NULL)
+ {
+ struct symtab_and_line val;
+ struct symbol *proc_symbol =
+ PROC_DESC_IS_DUMMY (proc_desc) ? 0 : PROC_SYMBOL (proc_desc);
+
+ if (proc_symbol)
+ {
+ val = find_pc_line (BLOCK_START
+ (SYMBOL_BLOCK_VALUE (proc_symbol)), 0);
+ val.pc = val.end ? val.end : pc;
+ }
+ if (!proc_symbol || pc < val.pc)
+ {
+ mips_extra_func_info_t found_heuristic =
+ heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
+ pc, next_frame, cur_frame);
+ if (found_heuristic)
+ proc_desc = found_heuristic;
+ }
+ }
+ }
+ else
+ {
+ /* Is linked_proc_desc_table really necessary? It only seems to be used
+ by procedure call dummys. However, the procedures being called ought
+ to have their own proc_descs, and even if they don't,
+ heuristic_proc_desc knows how to create them! */
+
+ struct linked_proc_info *link;
+
+ for (link = linked_proc_desc_table; link; link = link->next)
+ if (PROC_LOW_ADDR (&link->info) <= pc
+ && PROC_HIGH_ADDR (&link->info) > pc)
+ return &link->info;
+
+ if (startaddr == 0)
+ startaddr = heuristic_proc_start (pc);
+
+ proc_desc = heuristic_proc_desc (startaddr, pc, next_frame, cur_frame);
+ }
+ return proc_desc;
+}
+
+/* MIPS stack frames are almost impenetrable. When execution stops,
+ we basically have to look at symbol information for the function
+ that we stopped in, which tells us *which* register (if any) is
+ the base of the frame pointer, and what offset from that register
+ the frame itself is at.
+
+ This presents a problem when trying to examine a stack in memory
+ (that isn't executing at the moment), using the "frame" command. We
+ don't have a PC, nor do we have any registers except SP.
+
+ This routine takes two arguments, SP and PC, and tries to make the
+ cached frames look as if these two arguments defined a frame on the
+ cache. This allows the rest of info frame to extract the important
+ arguments without difficulty. */
+
+struct frame_info *
+setup_arbitrary_frame (int argc, CORE_ADDR *argv)
+{
+ if (argc != 2)
+ error ("MIPS frame specifications require two arguments: sp and pc");
+
+ return create_new_frame (argv[0], argv[1]);
+}
+
+/* According to the current ABI, should the type be passed in a
+ floating-point register (assuming that there is space)? When there
+ is no FPU, FP are not even considered as possibile candidates for
+ FP registers and, consequently this returns false - forces FP
+ arguments into integer registers. */
+
+static int
+fp_register_arg_p (enum type_code typecode, struct type *arg_type)
+{
+ return ((typecode == TYPE_CODE_FLT
+ || (MIPS_EABI
+ && (typecode == TYPE_CODE_STRUCT
+ || typecode == TYPE_CODE_UNION)
+ && TYPE_NFIELDS (arg_type) == 1
+ && TYPE_CODE (TYPE_FIELD_TYPE (arg_type, 0)) == TYPE_CODE_FLT))
+ && MIPS_FPU_TYPE != MIPS_FPU_NONE);
+}
+
+/* On o32, argument passing in GPRs depends on the alignment of the type being
+ passed. Return 1 if this type must be aligned to a doubleword boundary. */
+
+static int
+mips_type_needs_double_align (struct type *type)
+{
+ enum type_code typecode = TYPE_CODE (type);
+
+ if (typecode == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8)
+ return 1;
+ else if (typecode == TYPE_CODE_STRUCT)
+ {
+ if (TYPE_NFIELDS (type) < 1)
+ return 0;
+ return mips_type_needs_double_align (TYPE_FIELD_TYPE (type, 0));
+ }
+ else if (typecode == TYPE_CODE_UNION)
+ {
+ int i, n;
+
+ n = TYPE_NFIELDS (type);
+ for (i = 0; i < n; i++)
+ if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i)))
+ return 1;
+ return 0;
+ }
+ return 0;
+}
+
+/* Adjust the address downward (direction of stack growth) so that it
+ is correctly aligned for a new stack frame. */
+static CORE_ADDR
+mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ return align_down (addr, 16);
+}
+
+/* Determine how a return value is stored within the MIPS register
+ file, given the return type `valtype'. */
+
+struct return_value_word
+{
+ int len;
+ int reg;
+ int reg_offset;
+ int buf_offset;
+};
+
+static void
+return_value_location (struct type *valtype,
+ struct return_value_word *hi,
+ struct return_value_word *lo)
+{
+ int len = TYPE_LENGTH (valtype);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ if (TYPE_CODE (valtype) == TYPE_CODE_FLT
+ && ((MIPS_FPU_TYPE == MIPS_FPU_DOUBLE && (len == 4 || len == 8))
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE && len == 4)))
+ {
+ if (mips_abi_regsize (current_gdbarch) < 8 && len == 8)
+ {
+ /* We need to break a 64bit float in two 32 bit halves and
+ spread them across a floating-point register pair. */
+ lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
+ hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4;
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->
+ fp0) == 8) ? 4 : 0);
+ hi->reg_offset = lo->reg_offset;
+ lo->reg = mips_regnum (current_gdbarch)->fp0 + 0;
+ hi->reg = mips_regnum (current_gdbarch)->fp0 + 1;
+ lo->len = 4;
+ hi->len = 4;
+ }
+ else
+ {
+ /* The floating point value fits in a single floating-point
+ register. */
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->
+ fp0) == 8
+ && len == 4) ? 4 : 0);
+ lo->reg = mips_regnum (current_gdbarch)->fp0;
+ lo->len = len;
+ lo->buf_offset = 0;
+ hi->len = 0;
+ hi->reg_offset = 0;
+ hi->buf_offset = 0;
+ hi->reg = 0;
+ }
+ }
+ else
+ {
+ /* Locate a result possibly spread across two registers. */
+ int regnum = 2;
+ lo->reg = regnum + 0;
+ hi->reg = regnum + 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && len < mips_abi_regsize (current_gdbarch))
+ {
+ /* "un-left-justify" the value in the low register */
+ lo->reg_offset = mips_abi_regsize (current_gdbarch) - len;
+ lo->len = len;
+ hi->reg_offset = 0;
+ hi->len = 0;
+ }
+ else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG && len > mips_abi_regsize (current_gdbarch) /* odd-size structs */
+ && len < mips_abi_regsize (current_gdbarch) * 2
+ && (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+ TYPE_CODE (valtype) == TYPE_CODE_UNION))
+ {
+ /* "un-left-justify" the value spread across two registers. */
+ lo->reg_offset = 2 * mips_abi_regsize (current_gdbarch) - len;
+ lo->len = mips_abi_regsize (current_gdbarch) - lo->reg_offset;
+ hi->reg_offset = 0;
+ hi->len = len - lo->len;
+ }
+ else
+ {
+ /* Only perform a partial copy of the second register. */
+ lo->reg_offset = 0;
+ hi->reg_offset = 0;
+ if (len > mips_abi_regsize (current_gdbarch))
+ {
+ lo->len = mips_abi_regsize (current_gdbarch);
+ hi->len = len - mips_abi_regsize (current_gdbarch);
+ }
+ else
+ {
+ lo->len = len;
+ hi->len = 0;
+ }
+ }
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && register_size (current_gdbarch, regnum) == 8
+ && mips_abi_regsize (current_gdbarch) == 4)
+ {
+ /* Account for the fact that only the least-signficant part
+ of the register is being used */
+ lo->reg_offset += 4;
+ hi->reg_offset += 4;
+ }
+ lo->buf_offset = 0;
+ hi->buf_offset = lo->len;
+ }
+}
+
+/* Should call_function allocate stack space for a struct return? */
+
+static int
+mips_eabi_use_struct_convention (int gcc_p, struct type *type)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ return (TYPE_LENGTH (type) > 2 * mips_abi_regsize (current_gdbarch));
+}
+
+/* Should call_function pass struct by reference?
+ For each architecture, structs are passed either by
+ value or by reference, depending on their size. */
+
+static int
+mips_eabi_reg_struct_has_addr (int gcc_p, struct type *type)
+{
+ enum type_code typecode = TYPE_CODE (check_typedef (type));
+ int len = TYPE_LENGTH (check_typedef (type));
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ if (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
+ return (len > mips_abi_regsize (current_gdbarch));
+
+ return 0;
+}
+
+static CORE_ADDR
+mips_eabi_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
int argreg;
int float_argreg;
int argnum;
int len = 0;
int stack_offset = 0;
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ CORE_ADDR func_addr = find_function_addr (function, NULL);
/* For shared libraries, "t9" needs to point at the function
address. */
than necessary for EABI, because the first few arguments are
passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- mips_stack_argsize (tdep));
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
+ fprintf_unfiltered (gdb_stdlog,
"mips_eabi_push_dummy_call: sp=0x%s allocated %ld\n",
paddr_nz (sp), (long) align_up (len, 16));
/* The EABI passes structures that do not fit in a register by
reference. */
- if (len > mips_saved_regsize (tdep)
+ if (len > mips_abi_regsize (gdbarch)
&& (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
{
- store_unsigned_integer (valbuf, mips_saved_regsize (tdep),
+ store_unsigned_integer (valbuf, mips_abi_regsize (gdbarch),
VALUE_ADDRESS (arg));
typecode = TYPE_CODE_PTR;
- len = mips_saved_regsize (tdep);
+ len = mips_abi_regsize (gdbarch);
val = valbuf;
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " push");
up before the check to see if there are any FP registers
left. Non MIPS_EABI targets also pass the FP in the integer
registers so also round up normal registers. */
- if (!FP_REGISTER_DOUBLE
+ if (mips_abi_regsize (gdbarch) < 8
&& fp_register_arg_p (typecode, arg_type))
{
if ((float_argreg & 1))
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
- if (!FP_REGISTER_DOUBLE && len == 8)
+ if (mips_abi_regsize (gdbarch) < 8 && len == 8)
{
int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
unsigned long regval;
/* This is a floating point value that fits entirely
in a single register. */
/* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
+ above to ensure that it is even register aligned. */
LONGEST regval = extract_unsigned_integer (val, len);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
register-sized pieces. Large arguments are split between
registers and stack. */
/* Note: structs whose size is not a multiple of
- mips_regsize() are treated specially: Irix cc passes them
- in registers where gcc sometimes puts them on the stack.
- For maximum compatibility, we will put them in both
- places. */
- int odd_sized_struct = ((len > mips_saved_regsize (tdep))
- && (len % mips_saved_regsize (tdep) != 0));
+ mips_abi_regsize() are treated specially: Irix cc passes
+ them in registers where gcc sometimes puts them on the
+ stack. For maximum compatibility, we will put them in
+ both places. */
+ int odd_sized_struct = ((len > mips_abi_regsize (gdbarch))
+ && (len % mips_abi_regsize (gdbarch) != 0));
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len = (len < mips_saved_regsize (tdep)
- ? len : mips_saved_regsize (tdep));
+ int partial_len = (len < mips_abi_regsize (gdbarch)
+ ? len : mips_abi_regsize (gdbarch));
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
stack_used_p = 1;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- if (mips_stack_argsize (tdep) == 8
+ if (mips_stack_argsize (gdbarch) == 8
&& (typecode == TYPE_CODE_INT
|| typecode == TYPE_CODE_PTR
- || typecode == TYPE_CODE_FLT)
- && len <= 4)
- longword_offset = mips_stack_argsize (tdep) - len;
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (gdbarch) - len;
else if ((typecode == TYPE_CODE_STRUCT
|| typecode == TYPE_CODE_UNION)
&& (TYPE_LENGTH (arg_type)
- < mips_stack_argsize (tdep)))
- longword_offset = mips_stack_argsize (tdep) - len;
+ < mips_stack_argsize (gdbarch)))
+ longword_offset = mips_stack_argsize (gdbarch) - len;
}
if (mips_debug)
if (mips_debug)
{
int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
paddr_nz (addr));
for (i = 0; i < partial_len; i++)
{
- fprintf_unfiltered (gdb_stdlog, "%02x",
+ fprintf_unfiltered (gdb_stdlog, "%02x",
val[i] & 0xff);
}
}
structs may go thru BOTH paths. Floating point
arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
- LONGEST regval = extract_unsigned_integer (val, partial_len);
+ LONGEST regval =
+ extract_unsigned_integer (val, partial_len);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, mips_saved_regsize (tdep)));
+ phex (regval,
+ mips_abi_regsize (gdbarch)));
write_register (argreg, regval);
argreg++;
}
val += partial_len;
/* Compute the the offset into the stack at which we
- will copy the next parameter.
+ will copy the next parameter.
In the new EABI (and the NABI32), the stack_offset
only needs to be adjusted when it has been used. */
if (stack_used_p)
stack_offset += align_up (partial_len,
- mips_stack_argsize (tdep));
+ mips_stack_argsize (gdbarch));
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
/* Return adjusted stack pointer. */
return sp;
}
-/* N32/N64 version of push_dummy_call. */
+/* Given a return value in `regbuf' with a type `valtype', extract and
+ copy its value into `valbuf'. */
+
+static void
+mips_eabi_extract_return_value (struct type *valtype,
+ char regbuf[], char *valbuf)
+{
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
+
+ memcpy (valbuf + lo.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + lo.reg) +
+ lo.reg_offset, lo.len);
+
+ if (hi.len > 0)
+ memcpy (valbuf + hi.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + hi.reg) +
+ hi.reg_offset, hi.len);
+}
+
+/* Given a return value in `valbuf' with a type `valtype', write it's
+ value into the appropriate register. */
+
+static void
+mips_eabi_store_return_value (struct type *valtype, char *valbuf)
+{
+ char raw_buffer[MAX_REGISTER_SIZE];
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
+
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg),
+ raw_buffer, register_size (current_gdbarch,
+ lo.reg));
+
+ if (hi.len > 0)
+ {
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg),
+ raw_buffer,
+ register_size (current_gdbarch,
+ hi.reg));
+ }
+}
+
+/* N32/N64 ABI stuff. */
static CORE_ADDR
-mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
- struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
- struct value **args, CORE_ADDR sp, int struct_return,
- CORE_ADDR struct_addr)
+mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int len = 0;
int stack_offset = 0;
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ CORE_ADDR func_addr = find_function_addr (function, NULL);
/* For shared libraries, "t9" needs to point at the function
address. */
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- mips_stack_argsize (tdep));
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
+ fprintf_unfiltered (gdb_stdlog,
"mips_n32n64_push_dummy_call: sp=0x%s allocated %ld\n",
paddr_nz (sp), (long) align_up (len, 16));
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
register-sized pieces. Large arguments are split between
registers and stack. */
/* Note: structs whose size is not a multiple of
- mips_regsize() are treated specially: Irix cc passes them
- in registers where gcc sometimes puts them on the stack.
- For maximum compatibility, we will put them in both
- places. */
- int odd_sized_struct = ((len > mips_saved_regsize (tdep))
- && (len % mips_saved_regsize (tdep) != 0));
+ mips_abi_regsize() are treated specially: Irix cc passes
+ them in registers where gcc sometimes puts them on the
+ stack. For maximum compatibility, we will put them in
+ both places. */
+ int odd_sized_struct = ((len > mips_abi_regsize (gdbarch))
+ && (len % mips_abi_regsize (gdbarch) != 0));
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
/* Rememer if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len = (len < mips_saved_regsize (tdep)
- ? len : mips_saved_regsize (tdep));
+ int partial_len = (len < mips_abi_regsize (gdbarch)
+ ? len : mips_abi_regsize (gdbarch));
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
stack_used_p = 1;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- if (mips_stack_argsize (tdep) == 8
+ if (mips_stack_argsize (gdbarch) == 8
&& (typecode == TYPE_CODE_INT
|| typecode == TYPE_CODE_PTR
- || typecode == TYPE_CODE_FLT)
- && len <= 4)
- longword_offset = mips_stack_argsize (tdep) - len;
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (gdbarch) - len;
}
if (mips_debug)
if (mips_debug)
{
int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
paddr_nz (addr));
for (i = 0; i < partial_len; i++)
{
- fprintf_unfiltered (gdb_stdlog, "%02x",
+ fprintf_unfiltered (gdb_stdlog, "%02x",
val[i] & 0xff);
}
}
structs may go thru BOTH paths. Floating point
arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
- LONGEST regval = extract_unsigned_integer (val, partial_len);
+ LONGEST regval =
+ extract_unsigned_integer (val, partial_len);
/* A non-floating-point argument being passed in a
general register. If a struct or union, and if
cagney/2001-07-23: gdb/179: Also, GCC, when
outputting LE O32 with sizeof (struct) <
- mips_saved_regsize(), generates a left shift as
+ mips_abi_regsize(), generates a left shift as
part of storing the argument in a register a
register (the left shift isn't generated when
- sizeof (struct) >= mips_saved_regsize()). Since
+ sizeof (struct) >= mips_abi_regsize()). Since
it is quite possible that this is GCC
contradicting the LE/O32 ABI, GDB has not been
adjusted to accommodate this. Either someone
accordingly. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && partial_len < mips_saved_regsize (tdep)
+ && partial_len < mips_abi_regsize (gdbarch)
&& (typecode == TYPE_CODE_STRUCT ||
typecode == TYPE_CODE_UNION))
- regval <<= ((mips_saved_regsize (tdep) - partial_len) *
+ regval <<= ((mips_abi_regsize (gdbarch) - partial_len) *
TARGET_CHAR_BIT);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, mips_saved_regsize (tdep)));
+ phex (regval,
+ mips_abi_regsize (gdbarch)));
write_register (argreg, regval);
argreg++;
}
val += partial_len;
/* Compute the the offset into the stack at which we
- will copy the next parameter.
+ will copy the next parameter.
In N32 (N64?), the stack_offset only needs to be
adjusted when it has been used. */
if (stack_used_p)
stack_offset += align_up (partial_len,
- mips_stack_argsize (tdep));
+ mips_stack_argsize (gdbarch));
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
/* Return adjusted stack pointer. */
return sp;
}
-/* O32 version of push_dummy_call. */
+static enum return_value_convention
+mips_n32n64_return_value (struct gdbarch *gdbarch,
+ struct type *type, struct regcache *regcache,
+ void *readbuf, const void *writebuf)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_CODE (type) == TYPE_CODE_ARRAY
+ || TYPE_LENGTH (type) > 2 * mips_abi_regsize (gdbarch))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A floating-point value belongs in the least significant part
+ of FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0,
+ TYPE_LENGTH (type),
+ TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ && TYPE_NFIELDS (type) <= 2
+ && TYPE_NFIELDS (type) >= 1
+ && ((TYPE_NFIELDS (type) == 1
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT))
+ || (TYPE_NFIELDS (type) == 2
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT)
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
+ == TYPE_CODE_FLT)))
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A struct that contains one or two floats. Each value is part
+ in the least significant part of their floating point
+ register.. */
+ int regnum;
+ int field;
+ for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
+ field < TYPE_NFIELDS (type); field++, regnum += 2)
+ {
+ int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
+ / TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n",
+ offset);
+ mips_xfer_register (regcache, NUM_REGS + regnum,
+ TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
+ {
+ /* A structure or union. Extract the left justified value,
+ regardless of the byte order. I.e. DO NOT USE
+ mips_xfer_lower. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (current_gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (current_gdbarch, regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else
+ {
+ /* A scalar extract each part but least-significant-byte
+ justified. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (current_gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (current_gdbarch, regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+}
+
+/* O32 ABI stuff. */
static CORE_ADDR
-mips_o32_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
- struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
- struct value **args, CORE_ADDR sp, int struct_return,
- CORE_ADDR struct_addr)
+mips_o32_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int len = 0;
int stack_offset = 0;
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ CORE_ADDR func_addr = find_function_addr (function, NULL);
/* For shared libraries, "t9" needs to point at the function
address. */
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- mips_stack_argsize (tdep));
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
+ fprintf_unfiltered (gdb_stdlog,
"mips_o32_push_dummy_call: sp=0x%s allocated %ld\n",
paddr_nz (sp), (long) align_up (len, 16));
"mips_o32_push_dummy_call: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
- stack_offset += mips_stack_argsize (tdep);
+ stack_offset += mips_stack_argsize (gdbarch);
}
/* Now load as many as possible of the first arguments into
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
up before the check to see if there are any FP registers
left. O32/O64 targets also pass the FP in the integer
registers so also round up normal registers. */
- if (!FP_REGISTER_DOUBLE
+ if (mips_abi_regsize (gdbarch) < 8
&& fp_register_arg_p (typecode, arg_type))
{
if ((float_argreg & 1))
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
- if (!FP_REGISTER_DOUBLE && len == 8)
+ if (mips_abi_regsize (gdbarch) < 8 && len == 8)
{
int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
unsigned long regval;
/* This is a floating point value that fits entirely
in a single register. */
/* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
+ above to ensure that it is even register aligned. */
LONGEST regval = extract_unsigned_integer (val, len);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, len));
write_register (float_argreg++, regval);
/* CAGNEY: 32 bit MIPS ABI's always reserve two FP
- registers for each argument. The below is (my
- guess) to ensure that the corresponding integer
- register has reserved the same space. */
+ registers for each argument. The below is (my
+ guess) to ensure that the corresponding integer
+ register has reserved the same space. */
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
argreg, phex (regval, len));
write_register (argreg, regval);
- argreg += FP_REGISTER_DOUBLE ? 1 : 2;
+ argreg += (mips_abi_regsize (gdbarch) == 8) ? 1 : 2;
}
/* Reserve space for the FP register. */
- stack_offset += align_up (len, mips_stack_argsize (tdep));
+ stack_offset += align_up (len, mips_stack_argsize (gdbarch));
}
else
{
register-sized pieces. Large arguments are split between
registers and stack. */
/* Note: structs whose size is not a multiple of
- mips_regsize() are treated specially: Irix cc passes them
- in registers where gcc sometimes puts them on the stack.
- For maximum compatibility, we will put them in both
- places. */
- int odd_sized_struct = ((len > mips_saved_regsize (tdep))
- && (len % mips_saved_regsize (tdep) != 0));
+ mips_abi_regsize() are treated specially: Irix cc passes
+ them in registers where gcc sometimes puts them on the
+ stack. For maximum compatibility, we will put them in
+ both places. */
+ int odd_sized_struct = ((len > mips_abi_regsize (gdbarch))
+ && (len % mips_abi_regsize (gdbarch) != 0));
/* Structures should be aligned to eight bytes (even arg registers)
on MIPS_ABI_O32, if their first member has double precision. */
- if (mips_saved_regsize (tdep) < 8
+ if (mips_abi_regsize (gdbarch) < 8
&& mips_type_needs_double_align (arg_type))
{
if ((argreg & 1))
- argreg++;
+ argreg++;
}
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len = (len < mips_saved_regsize (tdep)
- ? len : mips_saved_regsize (tdep));
+ int partial_len = (len < mips_abi_regsize (gdbarch)
+ ? len : mips_abi_regsize (gdbarch));
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
stack_used_p = 1;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- if (mips_stack_argsize (tdep) == 8
+ if (mips_stack_argsize (gdbarch) == 8
&& (typecode == TYPE_CODE_INT
|| typecode == TYPE_CODE_PTR
- || typecode == TYPE_CODE_FLT)
- && len <= 4)
- longword_offset = mips_stack_argsize (tdep) - len;
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (gdbarch) - len;
}
if (mips_debug)
if (mips_debug)
{
int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
paddr_nz (addr));
for (i = 0; i < partial_len; i++)
{
- fprintf_unfiltered (gdb_stdlog, "%02x",
+ fprintf_unfiltered (gdb_stdlog, "%02x",
val[i] & 0xff);
}
}
structs may go thru BOTH paths. Floating point
arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
LONGEST regval = extract_signed_integer (val, partial_len);
/* Value may need to be sign extended, because
- mips_regsize() != mips_saved_regsize(). */
+ mips_isa_regsize() != mips_abi_regsize(). */
/* A non-floating-point argument being passed in a
general register. If a struct or union, and if
cagney/2001-07-23: gdb/179: Also, GCC, when
outputting LE O32 with sizeof (struct) <
- mips_saved_regsize(), generates a left shift as
+ mips_abi_regsize(), generates a left shift as
part of storing the argument in a register a
register (the left shift isn't generated when
- sizeof (struct) >= mips_saved_regsize()). Since
+ sizeof (struct) >= mips_abi_regsize()). Since
it is quite possible that this is GCC
contradicting the LE/O32 ABI, GDB has not been
adjusted to accommodate this. Either someone
identified as such and GDB gets tweaked
accordingly. */
- if (mips_saved_regsize (tdep) < 8
+ if (mips_abi_regsize (gdbarch) < 8
&& TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && partial_len < mips_saved_regsize (tdep)
+ && partial_len < mips_abi_regsize (gdbarch)
&& (typecode == TYPE_CODE_STRUCT ||
typecode == TYPE_CODE_UNION))
- regval <<= ((mips_saved_regsize (tdep) - partial_len) *
+ regval <<= ((mips_abi_regsize (gdbarch) - partial_len) *
TARGET_CHAR_BIT);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, mips_saved_regsize (tdep)));
+ phex (regval,
+ mips_abi_regsize (gdbarch)));
write_register (argreg, regval);
argreg++;
val += partial_len;
/* Compute the the offset into the stack at which we
- will copy the next parameter.
+ will copy the next parameter.
- In older ABIs, the caller reserved space for
- registers that contained arguments. This was loosely
- refered to as their "home". Consequently, space is
- always allocated. */
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated. */
stack_offset += align_up (partial_len,
- mips_stack_argsize (tdep));
+ mips_stack_argsize (gdbarch));
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
/* Return adjusted stack pointer. */
return sp;
}
-/* O64 version of push_dummy_call. */
+static enum return_value_convention
+mips_o32_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache,
+ void *readbuf, const void *writebuf)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_CODE (type) == TYPE_CODE_ARRAY)
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 4 && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A single-precision floating-point value. It fits in the
+ least significant part of FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0,
+ TYPE_LENGTH (type),
+ TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 8 && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A double-precision floating-point value. The most
+ significant part goes in FP1, and the least significant in
+ FP0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $fp1/$fp0\n");
+ switch (TARGET_BYTE_ORDER)
+ {
+ case BFD_ENDIAN_LITTLE:
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 1, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
+ break;
+ case BFD_ENDIAN_BIG:
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 1, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 +
+ 0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+#if 0
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ && TYPE_NFIELDS (type) <= 2
+ && TYPE_NFIELDS (type) >= 1
+ && ((TYPE_NFIELDS (type) == 1
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT))
+ || (TYPE_NFIELDS (type) == 2
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
+ == TYPE_CODE_FLT)
+ && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
+ == TYPE_CODE_FLT)))
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A struct that contains one or two floats. Each value is part
+ in the least significant part of their floating point
+ register.. */
+ bfd_byte reg[MAX_REGISTER_SIZE];
+ int regnum;
+ int field;
+ for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
+ field < TYPE_NFIELDS (type); field++, regnum += 2)
+ {
+ int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
+ / TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n",
+ offset);
+ mips_xfer_register (regcache, NUM_REGS + regnum,
+ TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+#endif
+#if 0
+ else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
+ {
+ /* A structure or union. Extract the left justified value,
+ regardless of the byte order. I.e. DO NOT USE
+ mips_xfer_lower. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += register_size (current_gdbarch, regnum), regnum++)
+ {
+ int xfer = register_size (current_gdbarch, regnum);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+#endif
+ else
+ {
+ /* A scalar extract each part but least-significant-byte
+ justified. o32 thinks registers are 4 byte, regardless of
+ the ISA. mips_stack_argsize controls this. */
+ int offset;
+ int regnum;
+ for (offset = 0, regnum = V0_REGNUM;
+ offset < TYPE_LENGTH (type);
+ offset += mips_stack_argsize (gdbarch), regnum++)
+ {
+ int xfer = mips_stack_argsize (gdbarch);
+ if (offset + xfer > TYPE_LENGTH (type))
+ xfer = TYPE_LENGTH (type) - offset;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
+ offset, xfer, regnum);
+ mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
+ TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+}
+
+/* O64 ABI. This is a hacked up kind of 64-bit version of the o32
+ ABI. */
static CORE_ADDR
-mips_o64_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
- struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
- struct value **args, CORE_ADDR sp, int struct_return,
- CORE_ADDR struct_addr)
+mips_o64_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs,
+ struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
int len = 0;
int stack_offset = 0;
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ CORE_ADDR func_addr = find_function_addr (function, NULL);
/* For shared libraries, "t9" needs to point at the function
address. */
/* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
- mips_stack_argsize (tdep));
+ len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])),
+ mips_stack_argsize (gdbarch));
sp -= align_up (len, 16);
if (mips_debug)
- fprintf_unfiltered (gdb_stdlog,
+ fprintf_unfiltered (gdb_stdlog,
"mips_o64_push_dummy_call: sp=0x%s allocated %ld\n",
paddr_nz (sp), (long) align_up (len, 16));
"mips_o64_push_dummy_call: struct_return reg=%d 0x%s\n",
argreg, paddr_nz (struct_addr));
write_register (argreg++, struct_addr);
- stack_offset += mips_stack_argsize (tdep);
+ stack_offset += mips_stack_argsize (gdbarch);
}
/* Now load as many as possible of the first arguments into
for (argnum = 0; argnum < nargs; argnum++)
{
char *val;
- char valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
up before the check to see if there are any FP registers
left. O32/O64 targets also pass the FP in the integer
registers so also round up normal registers. */
- if (!FP_REGISTER_DOUBLE
+ if (mips_abi_regsize (gdbarch) < 8
&& fp_register_arg_p (typecode, arg_type))
{
if ((float_argreg & 1))
if (fp_register_arg_p (typecode, arg_type)
&& float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
- if (!FP_REGISTER_DOUBLE && len == 8)
+ if (mips_abi_regsize (gdbarch) < 8 && len == 8)
{
int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
unsigned long regval;
/* This is a floating point value that fits entirely
in a single register. */
/* On 32 bit ABI's the float_argreg is further adjusted
- above to ensure that it is even register aligned. */
+ above to ensure that it is even register aligned. */
LONGEST regval = extract_unsigned_integer (val, len);
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
float_argreg, phex (regval, len));
write_register (float_argreg++, regval);
/* CAGNEY: 32 bit MIPS ABI's always reserve two FP
- registers for each argument. The below is (my
- guess) to ensure that the corresponding integer
- register has reserved the same space. */
+ registers for each argument. The below is (my
+ guess) to ensure that the corresponding integer
+ register has reserved the same space. */
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
argreg, phex (regval, len));
write_register (argreg, regval);
- argreg += FP_REGISTER_DOUBLE ? 1 : 2;
+ argreg += (mips_abi_regsize (gdbarch) == 8) ? 1 : 2;
}
/* Reserve space for the FP register. */
- stack_offset += align_up (len, mips_stack_argsize (tdep));
+ stack_offset += align_up (len, mips_stack_argsize (gdbarch));
}
else
{
register-sized pieces. Large arguments are split between
registers and stack. */
/* Note: structs whose size is not a multiple of
- mips_regsize() are treated specially: Irix cc passes them
- in registers where gcc sometimes puts them on the stack.
- For maximum compatibility, we will put them in both
- places. */
- int odd_sized_struct = ((len > mips_saved_regsize (tdep))
- && (len % mips_saved_regsize (tdep) != 0));
+ mips_abi_regsize() are treated specially: Irix cc passes
+ them in registers where gcc sometimes puts them on the
+ stack. For maximum compatibility, we will put them in
+ both places. */
+ int odd_sized_struct = ((len > mips_abi_regsize (gdbarch))
+ && (len % mips_abi_regsize (gdbarch) != 0));
/* Structures should be aligned to eight bytes (even arg registers)
on MIPS_ABI_O32, if their first member has double precision. */
- if (mips_saved_regsize (tdep) < 8
+ if (mips_abi_regsize (gdbarch) < 8
&& mips_type_needs_double_align (arg_type))
{
if ((argreg & 1))
- argreg++;
+ argreg++;
}
/* Note: Floating-point values that didn't fit into an FP
- register are only written to memory. */
+ register are only written to memory. */
while (len > 0)
{
/* Remember if the argument was written to the stack. */
int stack_used_p = 0;
- int partial_len = (len < mips_saved_regsize (tdep)
- ? len : mips_saved_regsize (tdep));
+ int partial_len = (len < mips_abi_regsize (gdbarch)
+ ? len : mips_abi_regsize (gdbarch));
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
stack_used_p = 1;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- if (mips_stack_argsize (tdep) == 8
+ if (mips_stack_argsize (gdbarch) == 8
&& (typecode == TYPE_CODE_INT
|| typecode == TYPE_CODE_PTR
- || typecode == TYPE_CODE_FLT)
- && len <= 4)
- longword_offset = mips_stack_argsize (tdep) - len;
+ || typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = mips_stack_argsize (gdbarch) - len;
}
if (mips_debug)
if (mips_debug)
{
int i;
- fprintf_unfiltered (gdb_stdlog, " @0x%s ",
+ fprintf_unfiltered (gdb_stdlog, " @0x%s ",
paddr_nz (addr));
for (i = 0; i < partial_len; i++)
{
- fprintf_unfiltered (gdb_stdlog, "%02x",
+ fprintf_unfiltered (gdb_stdlog, "%02x",
val[i] & 0xff);
}
}
structs may go thru BOTH paths. Floating point
arguments will not. */
/* Write this portion of the argument to a general
- purpose register. */
+ purpose register. */
if (argreg <= MIPS_LAST_ARG_REGNUM
&& !fp_register_arg_p (typecode, arg_type))
{
LONGEST regval = extract_signed_integer (val, partial_len);
/* Value may need to be sign extended, because
- mips_regsize() != mips_saved_regsize(). */
+ mips_isa_regsize() != mips_abi_regsize(). */
/* A non-floating-point argument being passed in a
general register. If a struct or union, and if
cagney/2001-07-23: gdb/179: Also, GCC, when
outputting LE O32 with sizeof (struct) <
- mips_saved_regsize(), generates a left shift as
+ mips_abi_regsize(), generates a left shift as
part of storing the argument in a register a
register (the left shift isn't generated when
- sizeof (struct) >= mips_saved_regsize()). Since
+ sizeof (struct) >= mips_abi_regsize()). Since
it is quite possible that this is GCC
contradicting the LE/O32 ABI, GDB has not been
adjusted to accommodate this. Either someone
identified as such and GDB gets tweaked
accordingly. */
- if (mips_saved_regsize (tdep) < 8
+ if (mips_abi_regsize (gdbarch) < 8
&& TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && partial_len < mips_saved_regsize (tdep)
+ && partial_len < mips_abi_regsize (gdbarch)
&& (typecode == TYPE_CODE_STRUCT ||
typecode == TYPE_CODE_UNION))
- regval <<= ((mips_saved_regsize (tdep) - partial_len) *
+ regval <<= ((mips_abi_regsize (gdbarch) - partial_len) *
TARGET_CHAR_BIT);
if (mips_debug)
fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
argreg,
- phex (regval, mips_saved_regsize (tdep)));
+ phex (regval,
+ mips_abi_regsize (gdbarch)));
write_register (argreg, regval);
argreg++;
val += partial_len;
/* Compute the the offset into the stack at which we
- will copy the next parameter.
+ will copy the next parameter.
- In older ABIs, the caller reserved space for
- registers that contained arguments. This was loosely
- refered to as their "home". Consequently, space is
- always allocated. */
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated. */
stack_offset += align_up (partial_len,
- mips_stack_argsize (tdep));
+ mips_stack_argsize (gdbarch));
}
}
if (mips_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
/* Return adjusted stack pointer. */
return sp;
}
static void
-mips_pop_frame (void)
+mips_o64_extract_return_value (struct type *valtype,
+ char regbuf[], char *valbuf)
{
- int regnum;
- struct frame_info *frame = get_current_frame ();
- CORE_ADDR new_sp = get_frame_base (frame);
- mips_extra_func_info_t proc_desc;
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
-
- if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0))
- {
- generic_pop_dummy_frame ();
- flush_cached_frames ();
- return;
- }
-
- proc_desc = get_frame_extra_info (frame)->proc_desc;
- write_register (PC_REGNUM, DEPRECATED_FRAME_SAVED_PC (frame));
- mips_find_saved_regs (frame);
- for (regnum = 0; regnum < NUM_REGS; regnum++)
- if (regnum != SP_REGNUM && regnum != PC_REGNUM
- && deprecated_get_frame_saved_regs (frame)[regnum])
- {
- /* Floating point registers must not be sign extended, in case
- mips_saved_regsize() = 4 but sizeof (FP0_REGNUM) == 8. */
-
- if (mips_regnum (current_gdbarch)->fp0 <= regnum && regnum < mips_regnum (current_gdbarch)->fp0 + 32)
- write_register (regnum,
- read_memory_unsigned_integer (deprecated_get_frame_saved_regs (frame)[regnum],
- mips_saved_regsize (tdep)));
- else
- write_register (regnum,
- read_memory_integer (deprecated_get_frame_saved_regs (frame)[regnum],
- mips_saved_regsize (tdep)));
- }
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
- write_register (SP_REGNUM, new_sp);
- flush_cached_frames ();
+ memcpy (valbuf + lo.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + lo.reg) +
+ lo.reg_offset, lo.len);
- if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
- {
- struct linked_proc_info *pi_ptr, *prev_ptr;
+ if (hi.len > 0)
+ memcpy (valbuf + hi.buf_offset,
+ regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + hi.reg) +
+ hi.reg_offset, hi.len);
+}
- for (pi_ptr = linked_proc_desc_table, prev_ptr = NULL;
- pi_ptr != NULL;
- prev_ptr = pi_ptr, pi_ptr = pi_ptr->next)
- {
- if (&pi_ptr->info == proc_desc)
- break;
- }
+static void
+mips_o64_store_return_value (struct type *valtype, char *valbuf)
+{
+ char raw_buffer[MAX_REGISTER_SIZE];
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
- if (pi_ptr == NULL)
- error ("Can't locate dummy extra frame info\n");
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg),
+ raw_buffer, register_size (current_gdbarch,
+ lo.reg));
- if (prev_ptr != NULL)
- prev_ptr->next = pi_ptr->next;
- else
- linked_proc_desc_table = pi_ptr->next;
-
- xfree (pi_ptr);
-
- write_register (mips_regnum (current_gdbarch)->hi,
- read_memory_integer ((new_sp
- - 2 * mips_saved_regsize (tdep)),
- mips_saved_regsize (tdep)));
- write_register (mips_regnum (current_gdbarch)->lo,
- read_memory_integer ((new_sp
- - 3 * mips_saved_regsize (tdep)),
- mips_saved_regsize (tdep)));
- if (MIPS_FPU_TYPE != MIPS_FPU_NONE)
- write_register (mips_regnum (current_gdbarch)->fp_control_status,
- read_memory_integer ((new_sp
- - 4 * mips_saved_regsize (tdep)),
- mips_saved_regsize (tdep)));
+ if (hi.len > 0)
+ {
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
+ deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg),
+ raw_buffer,
+ register_size (current_gdbarch,
+ hi.reg));
}
}
if (raw_size == 8)
{
/* We have a 64-bit value for this register. Find the low-order
- 32 bits. */
+ 32 bits. */
int offset;
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
if (raw_size == 8 && !mips2_fp_compat ())
{
/* We have a 64-bit value for this register, and we should use
- all 64 bits. */
+ all 64 bits. */
if (!frame_register_read (frame, regno, rare_buffer))
error ("can't read register %d (%s)", regno, REGISTER_NAME (regno));
}
"odd-numbered FP register");
/* mips_read_fp_register_single will find the correct 32 bits from
- each register. */
+ each register. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
mips_read_fp_register_single (frame, regno, rare_buffer + 4);
int regnum)
{ /* do values for FP (float) regs */
char *raw_buffer;
- double doub, flt1, flt2; /* doubles extracted from raw hex data */
- int inv1, inv2, namelen;
+ double doub, flt1; /* doubles extracted from raw hex data */
+ int inv1, inv2;
- raw_buffer = (char *) alloca (2 * register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0));
+ raw_buffer =
+ (char *) alloca (2 *
+ register_size (current_gdbarch,
+ mips_regnum (current_gdbarch)->fp0));
fprintf_filtered (file, "%s:", REGISTER_NAME (regnum));
fprintf_filtered (file, "%*s", 4 - (int) strlen (REGISTER_NAME (regnum)),
mips_read_fp_register_single (frame, regnum, raw_buffer);
flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1);
- print_scalar_formatted (raw_buffer, builtin_type_uint32, 'x', 'w', file);
+ print_scalar_formatted (raw_buffer, builtin_type_uint32, 'x', 'w',
+ file);
fprintf_filtered (file, " flt: ");
if (inv1)
{
mips_read_fp_register_double (frame, regnum, raw_buffer);
doub = unpack_double (mips_double_register_type (), raw_buffer,
- &inv2);
+ &inv2);
fprintf_filtered (file, " dbl: ");
if (inv2)
doub = unpack_double (mips_double_register_type (), raw_buffer, &inv2);
- print_scalar_formatted (raw_buffer, builtin_type_uint64, 'x', 'g', file);
+ print_scalar_formatted (raw_buffer, builtin_type_uint64, 'x', 'g',
+ file);
fprintf_filtered (file, " flt: ");
if (inv1)
fprintf_filtered (file, ": ");
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- offset = register_size (current_gdbarch, regnum) - register_size (current_gdbarch, regnum);
+ offset =
+ register_size (current_gdbarch,
+ regnum) - register_size (current_gdbarch, regnum);
else
offset = 0;
- print_scalar_formatted (raw_buffer + offset, gdbarch_register_type (gdbarch, regnum),
- 'x', 0, file);
+ print_scalar_formatted (raw_buffer + offset,
+ gdbarch_register_type (gdbarch, regnum), 'x', 0,
+ file);
}
/* Replacement for generic do_registers_info.
struct gdbarch *gdbarch = get_frame_arch (frame);
/* do values for GP (int) regs */
char raw_buffer[MAX_REGISTER_SIZE];
- int ncols = (mips_regsize (gdbarch) == 8 ? 4 : 8); /* display cols per row */
+ int ncols = (mips_abi_regsize (gdbarch) == 8 ? 4 : 8); /* display cols per row */
int col, byte;
int regnum;
/* For GP registers, we print a separate row of names above the vals */
fprintf_filtered (file, " ");
for (col = 0, regnum = start_regnum;
- col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS;
- regnum++)
+ col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
{
if (*REGISTER_NAME (regnum) == '\0')
continue; /* unused register */
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ TYPE_CODE_FLT)
break; /* end the row: reached FP register */
- fprintf_filtered (file, mips_regsize (current_gdbarch) == 8 ? "%17s" : "%9s",
+ fprintf_filtered (file,
+ mips_abi_regsize (current_gdbarch) == 8 ? "%17s" : "%9s",
REGISTER_NAME (regnum));
col++;
}
/* now print the values in hex, 4 or 8 to the row */
for (col = 0, regnum = start_regnum;
- col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS;
- regnum++)
+ col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
{
if (*REGISTER_NAME (regnum) == '\0')
continue; /* unused register */
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ TYPE_CODE_FLT)
break; /* end row: reached FP register */
/* OK: get the data in raw format. */
if (!frame_register_read (frame, regnum, raw_buffer))
error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
/* pad small registers */
for (byte = 0;
- byte < (mips_regsize (current_gdbarch)
- - register_size (current_gdbarch, regnum));
- byte++)
+ byte < (mips_abi_regsize (current_gdbarch)
+ - register_size (current_gdbarch, regnum)); byte++)
printf_filtered (" ");
/* Now print the register value in hex, endian order. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- for (byte = register_size (current_gdbarch, regnum) - register_size (current_gdbarch, regnum);
- byte < register_size (current_gdbarch, regnum);
- byte++)
+ for (byte =
+ register_size (current_gdbarch,
+ regnum) - register_size (current_gdbarch, regnum);
+ byte < register_size (current_gdbarch, regnum); byte++)
fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
else
for (byte = register_size (current_gdbarch, regnum) - 1;
- byte >= 0;
- byte--)
+ byte >= 0; byte--)
fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]);
fprintf_filtered (file, " ");
col++;
regnum = NUM_REGS;
while (regnum < NUM_REGS + NUM_PSEUDO_REGS)
{
- if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT)
+ if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
+ TYPE_CODE_FLT)
{
if (all) /* true for "INFO ALL-REGISTERS" command */
regnum = print_fp_register_row (file, frame, regnum);
if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0)
/* If error reading memory, guess that it is not a delayed branch. */
return 0;
- return is_delayed ((unsigned long) extract_unsigned_integer (buf, MIPS_INSTLEN));
-}
-
-
-/* Given PC at the function's start address, attempt to find the
- prologue end using SAL information. Return zero if the skip fails.
-
- A non-optimized prologue traditionally has one SAL for the function
- and a second for the function body. A single line function has
- them both pointing at the same line.
-
- An optimized prologue is similar but the prologue may contain
- instructions (SALs) from the instruction body. Need to skip those
- while not getting into the function body.
-
- The functions end point and an increasing SAL line are used as
- indicators of the prologue's endpoint.
-
- This code is based on the function refine_prologue_limit (versions
- found in both ia64 and ppc). */
-
-static CORE_ADDR
-skip_prologue_using_sal (CORE_ADDR func_addr)
-{
- struct symtab_and_line prologue_sal;
- CORE_ADDR start_pc;
- CORE_ADDR end_pc;
-
- /* Get an initial range for the function. */
- find_pc_partial_function (func_addr, NULL, &start_pc, &end_pc);
- start_pc += FUNCTION_START_OFFSET;
-
- prologue_sal = find_pc_line (start_pc, 0);
- if (prologue_sal.line != 0)
- {
- while (prologue_sal.end < end_pc)
- {
- struct symtab_and_line sal;
-
- sal = find_pc_line (prologue_sal.end, 0);
- if (sal.line == 0)
- break;
- /* Assume that a consecutive SAL for the same (or larger)
- line mark the prologue -> body transition. */
- if (sal.line >= prologue_sal.line)
- break;
- /* The case in which compiler's optimizer/scheduler has
- moved instructions into the prologue. We look ahead in
- the function looking for address ranges whose
- corresponding line number is less the first one that we
- found for the function. This is more conservative then
- refine_prologue_limit which scans a large number of SALs
- looking for any in the prologue */
- prologue_sal = sal;
- }
- }
- return prologue_sal.end;
+ return is_delayed ((unsigned long)
+ extract_unsigned_integer (buf, MIPS_INSTLEN));
}
/* Skip the PC past function prologue instructions (32-bit version).
/* Find an upper bound on the prologue. */
end_pc = skip_prologue_using_sal (pc);
if (end_pc == 0)
- end_pc = pc + 100; /* Magic. */
+ end_pc = pc + 100; /* Magic. */
/* Skip the typical prologue instructions. These are the stack adjustment
instruction and the instructions that save registers on the stack
continue;
/* The following instructions load $at or $t0 with an immediate
value in preparation for a stack adjustment via
- subu $sp,$sp,[$at,$t0]. These instructions could also initialize
- a local variable, so we accept them only before a stack adjustment
- instruction was seen. */
- else if (!seen_sp_adjust)
- {
- if (high_word == 0x3c01 || /* lui $at,n */
- high_word == 0x3c08) /* lui $t0,n */
- {
- load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
- continue;
- }
- else if (high_word == 0x3421 || /* ori $at,$at,n */
- high_word == 0x3508 || /* ori $t0,$t0,n */
- high_word == 0x3401 || /* ori $at,$zero,n */
- high_word == 0x3408) /* ori $t0,$zero,n */
- {
- load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
- continue;
- }
- else
- break;
- }
- else
- break;
- }
-
- /* In a frameless function, we might have incorrectly
- skipped some load immediate instructions. Undo the skipping
- if the load immediate was not followed by a stack adjustment. */
- if (load_immediate_bytes && !seen_sp_adjust)
- pc -= load_immediate_bytes;
- return pc;
-}
-
-/* Skip the PC past function prologue instructions (16-bit version).
- This is a helper function for mips_skip_prologue. */
-
-static CORE_ADDR
-mips16_skip_prologue (CORE_ADDR pc)
-{
- CORE_ADDR end_pc;
- int extend_bytes = 0;
- int prev_extend_bytes;
-
- /* Table of instructions likely to be found in a function prologue. */
- static struct
- {
- unsigned short inst;
- unsigned short mask;
- }
- table[] =
- {
- {
- 0x6300, 0xff00
- }
- , /* addiu $sp,offset */
- {
- 0xfb00, 0xff00
- }
- , /* daddiu $sp,offset */
- {
- 0xd000, 0xf800
- }
- , /* sw reg,n($sp) */
- {
- 0xf900, 0xff00
- }
- , /* sd reg,n($sp) */
- {
- 0x6200, 0xff00
- }
- , /* sw $ra,n($sp) */
- {
- 0xfa00, 0xff00
- }
- , /* sd $ra,n($sp) */
- {
- 0x673d, 0xffff
- }
- , /* move $s1,sp */
- {
- 0xd980, 0xff80
- }
- , /* sw $a0-$a3,n($s1) */
- {
- 0x6704, 0xff1c
- }
- , /* move reg,$a0-$a3 */
- {
- 0xe809, 0xf81f
- }
- , /* entry pseudo-op */
- {
- 0x0100, 0xff00
- }
- , /* addiu $s1,$sp,n */
- {
- 0, 0
- } /* end of table marker */
- };
-
- /* Find an upper bound on the prologue. */
- end_pc = skip_prologue_using_sal (pc);
- if (end_pc == 0)
- end_pc = pc + 100; /* Magic. */
-
- /* Skip the typical prologue instructions. These are the stack adjustment
- instruction and the instructions that save registers on the stack
- or in the gcc frame. */
- for (; pc < end_pc; pc += MIPS16_INSTLEN)
- {
- unsigned short inst;
- int i;
-
- inst = mips_fetch_instruction (pc);
-
- /* Normally we ignore an extend instruction. However, if it is
- not followed by a valid prologue instruction, we must adjust
- the pc back over the extend so that it won't be considered
- part of the prologue. */
- if ((inst & 0xf800) == 0xf000) /* extend */
- {
- extend_bytes = MIPS16_INSTLEN;
- continue;
- }
- prev_extend_bytes = extend_bytes;
- extend_bytes = 0;
-
- /* Check for other valid prologue instructions besides extend. */
- for (i = 0; table[i].mask != 0; i++)
- if ((inst & table[i].mask) == table[i].inst) /* found, get out */
- break;
- if (table[i].mask != 0) /* it was in table? */
- continue; /* ignore it */
- else
- /* non-prologue */
- {
- /* Return the current pc, adjusted backwards by 2 if
- the previous instruction was an extend. */
- return pc - prev_extend_bytes;
- }
- }
- return pc;
-}
-
-/* To skip prologues, I use this predicate. Returns either PC itself
- if the code at PC does not look like a function prologue; otherwise
- returns an address that (if we're lucky) follows the prologue. If
- LENIENT, then we must skip everything which is involved in setting
- up the frame (it's OK to skip more, just so long as we don't skip
- anything which might clobber the registers which are being saved.
- We must skip more in the case where part of the prologue is in the
- delay slot of a non-prologue instruction). */
-
-static CORE_ADDR
-mips_skip_prologue (CORE_ADDR pc)
-{
- /* See if we can determine the end of the prologue via the symbol table.
- If so, then return either PC, or the PC after the prologue, whichever
- is greater. */
-
- CORE_ADDR post_prologue_pc = after_prologue (pc, NULL);
-
- if (post_prologue_pc != 0)
- return max (pc, post_prologue_pc);
-
- /* Can't determine prologue from the symbol table, need to examine
- instructions. */
-
- if (pc_is_mips16 (pc))
- return mips16_skip_prologue (pc);
- else
- return mips32_skip_prologue (pc);
-}
-
-/* Determine how a return value is stored within the MIPS register
- file, given the return type `valtype'. */
-
-struct return_value_word
-{
- int len;
- int reg;
- int reg_offset;
- int buf_offset;
-};
-
-static void
-return_value_location (struct type *valtype,
- struct return_value_word *hi,
- struct return_value_word *lo)
-{
- int len = TYPE_LENGTH (valtype);
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
-
- if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && ((MIPS_FPU_TYPE == MIPS_FPU_DOUBLE && (len == 4 || len == 8))
- || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE && len == 4)))
- {
- if (!FP_REGISTER_DOUBLE && len == 8)
- {
- /* We need to break a 64bit float in two 32 bit halves and
- spread them across a floating-point register pair. */
- lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
- hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4;
- lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0) == 8)
- ? 4 : 0);
- hi->reg_offset = lo->reg_offset;
- lo->reg = mips_regnum (current_gdbarch)->fp0 + 0;
- hi->reg = mips_regnum (current_gdbarch)->fp0 + 1;
- lo->len = 4;
- hi->len = 4;
- }
- else
- {
- /* The floating point value fits in a single floating-point
- register. */
- lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && register_size (current_gdbarch, mips_regnum (current_gdbarch)->fp0) == 8
- && len == 4)
- ? 4 : 0);
- lo->reg = mips_regnum (current_gdbarch)->fp0;
- lo->len = len;
- lo->buf_offset = 0;
- hi->len = 0;
- hi->reg_offset = 0;
- hi->buf_offset = 0;
- hi->reg = 0;
- }
- }
- else
- {
- /* Locate a result possibly spread across two registers. */
- int regnum = 2;
- lo->reg = regnum + 0;
- hi->reg = regnum + 1;
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && len < mips_saved_regsize (tdep))
- {
- /* "un-left-justify" the value in the low register */
- lo->reg_offset = mips_saved_regsize (tdep) - len;
- lo->len = len;
- hi->reg_offset = 0;
- hi->len = 0;
- }
- else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && len > mips_saved_regsize (tdep) /* odd-size structs */
- && len < mips_saved_regsize (tdep) * 2
- && (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
- TYPE_CODE (valtype) == TYPE_CODE_UNION))
- {
- /* "un-left-justify" the value spread across two registers. */
- lo->reg_offset = 2 * mips_saved_regsize (tdep) - len;
- lo->len = mips_saved_regsize (tdep) - lo->reg_offset;
- hi->reg_offset = 0;
- hi->len = len - lo->len;
- }
- else
+ subu $sp,$sp,[$at,$t0]. These instructions could also initialize
+ a local variable, so we accept them only before a stack adjustment
+ instruction was seen. */
+ else if (!seen_sp_adjust)
{
- /* Only perform a partial copy of the second register. */
- lo->reg_offset = 0;
- hi->reg_offset = 0;
- if (len > mips_saved_regsize (tdep))
+ if (high_word == 0x3c01 || /* lui $at,n */
+ high_word == 0x3c08) /* lui $t0,n */
{
- lo->len = mips_saved_regsize (tdep);
- hi->len = len - mips_saved_regsize (tdep);
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+ continue;
}
- else
+ else if (high_word == 0x3421 || /* ori $at,$at,n */
+ high_word == 0x3508 || /* ori $t0,$t0,n */
+ high_word == 0x3401 || /* ori $at,$zero,n */
+ high_word == 0x3408) /* ori $t0,$zero,n */
{
- lo->len = len;
- hi->len = 0;
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+ continue;
}
+ else
+ break;
}
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && register_size (current_gdbarch, regnum) == 8
- && mips_saved_regsize (tdep) == 4)
- {
- /* Account for the fact that only the least-signficant part
- of the register is being used */
- lo->reg_offset += 4;
- hi->reg_offset += 4;
- }
- lo->buf_offset = 0;
- hi->buf_offset = lo->len;
+ else
+ break;
}
-}
-
-/* Given a return value in `regbuf' with a type `valtype', extract and
- copy its value into `valbuf'. */
-
-static void
-mips_eabi_extract_return_value (struct type *valtype,
- char regbuf[],
- char *valbuf)
-{
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
-
- memcpy (valbuf + lo.buf_offset,
- regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + lo.reg) + lo.reg_offset,
- lo.len);
-
- if (hi.len > 0)
- memcpy (valbuf + hi.buf_offset,
- regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + hi.reg) + hi.reg_offset,
- hi.len);
-}
-
-static void
-mips_o64_extract_return_value (struct type *valtype,
- char regbuf[],
- char *valbuf)
-{
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
-
- memcpy (valbuf + lo.buf_offset,
- regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + lo.reg) + lo.reg_offset,
- lo.len);
- if (hi.len > 0)
- memcpy (valbuf + hi.buf_offset,
- regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + hi.reg) + hi.reg_offset,
- hi.len);
+ /* In a frameless function, we might have incorrectly
+ skipped some load immediate instructions. Undo the skipping
+ if the load immediate was not followed by a stack adjustment. */
+ if (load_immediate_bytes && !seen_sp_adjust)
+ pc -= load_immediate_bytes;
+ return pc;
}
-/* Given a return value in `valbuf' with a type `valtype', write it's
- value into the appropriate register. */
+/* Skip the PC past function prologue instructions (16-bit version).
+ This is a helper function for mips_skip_prologue. */
-static void
-mips_eabi_store_return_value (struct type *valtype, char *valbuf)
+static CORE_ADDR
+mips16_skip_prologue (CORE_ADDR pc)
{
- char raw_buffer[MAX_REGISTER_SIZE];
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
-
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg), raw_buffer,
- register_size (current_gdbarch, lo.reg));
+ CORE_ADDR end_pc;
+ int extend_bytes = 0;
+ int prev_extend_bytes;
- if (hi.len > 0)
+ /* Table of instructions likely to be found in a function prologue. */
+ static struct
+ {
+ unsigned short inst;
+ unsigned short mask;
+ }
+ table[] =
+ {
{
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg), raw_buffer,
- register_size (current_gdbarch, hi.reg));
- }
-}
-
-static void
-mips_o64_store_return_value (struct type *valtype, char *valbuf)
-{
- char raw_buffer[MAX_REGISTER_SIZE];
- struct return_value_word lo;
- struct return_value_word hi;
- return_value_location (valtype, &hi, &lo);
-
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg), raw_buffer,
- register_size (current_gdbarch, lo.reg));
-
- if (hi.len > 0)
+ 0x6300, 0xff00}
+ , /* addiu $sp,offset */
{
- memset (raw_buffer, 0, sizeof (raw_buffer));
- memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
- deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg), raw_buffer,
- register_size (current_gdbarch, hi.reg));
- }
-}
-
-/* O32 ABI stuff. */
-
-static enum return_value_convention
-mips_o32_return_value (struct gdbarch *gdbarch, struct type *type,
- struct regcache *regcache,
- void *readbuf, const void *writebuf)
-{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
-
- if (TYPE_CODE (type)== TYPE_CODE_STRUCT
- || TYPE_CODE (type)== TYPE_CODE_UNION
- || TYPE_CODE (type)== TYPE_CODE_ARRAY)
- return RETURN_VALUE_STRUCT_CONVENTION;
- else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && TYPE_LENGTH (type) == 4
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ 0xfb00, 0xff00}
+ , /* daddiu $sp,offset */
{
- /* A single-precision floating-point value. It fits in the
- least significant part of FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0,
- TYPE_LENGTH (type),
- TARGET_BYTE_ORDER, readbuf, writebuf, 0);
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
- else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && TYPE_LENGTH (type) == 8
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ 0xd000, 0xf800}
+ , /* sw reg,n($sp) */
{
- /* A double-precision floating-point value. The most
- significant part goes in FP1, and the least significant in
- FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp1/$fp0\n");
- switch (TARGET_BYTE_ORDER)
- {
- case BFD_ENDIAN_LITTLE:
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0 + 0,
- 4, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0 + 1,
- 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
- break;
- case BFD_ENDIAN_BIG:
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0 + 1,
- 4, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0 + 0,
- 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4);
- break;
- default:
- internal_error (__FILE__, __LINE__, "bad switch");
- }
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
-#if 0
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- && TYPE_NFIELDS (type) <= 2
- && TYPE_NFIELDS (type) >= 1
- && ((TYPE_NFIELDS (type) == 1
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT))
- || (TYPE_NFIELDS (type) == 2
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT)
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
- == TYPE_CODE_FLT)))
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ 0xf900, 0xff00}
+ , /* sd reg,n($sp) */
{
- /* A struct that contains one or two floats. Each value is part
- in the least significant part of their floating point
- register.. */
- bfd_byte reg[MAX_REGISTER_SIZE];
- int regnum;
- int field;
- for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
- field < TYPE_NFIELDS (type);
- field++, regnum += 2)
- {
- int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
- / TARGET_CHAR_BIT);
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset);
- mips_xfer_register (regcache, NUM_REGS + regnum,
- TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
- TARGET_BYTE_ORDER, readbuf, writebuf, offset);
- }
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
-#endif
-#if 0
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION)
+ 0x6200, 0xff00}
+ , /* sw $ra,n($sp) */
{
- /* A structure or union. Extract the left justified value,
- regardless of the byte order. I.e. DO NOT USE
- mips_xfer_lower. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += register_size (current_gdbarch, regnum), regnum++)
- {
- int xfer = register_size (current_gdbarch, regnum);
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
- BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
- }
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
-#endif
- else
+ 0xfa00, 0xff00}
+ , /* sd $ra,n($sp) */
{
- /* A scalar extract each part but least-significant-byte
- justified. o32 thinks registers are 4 byte, regardless of
- the ISA. mips_stack_argsize controls this. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += mips_stack_argsize (tdep), regnum++)
- {
- int xfer = mips_stack_argsize (tdep);
- int pos = 0;
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
- TARGET_BYTE_ORDER, readbuf, writebuf, offset);
- }
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
-}
-
-/* N32/N44 ABI stuff. */
-
-static enum return_value_convention
-mips_n32n64_return_value (struct gdbarch *gdbarch,
- struct type *type, struct regcache *regcache,
- void *readbuf, const void *writebuf)
-{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- if (TYPE_CODE (type)== TYPE_CODE_STRUCT
- || TYPE_CODE (type)== TYPE_CODE_UNION
- || TYPE_CODE (type)== TYPE_CODE_ARRAY
- || TYPE_LENGTH (type) > 2 * mips_saved_regsize (tdep))
- return RETURN_VALUE_STRUCT_CONVENTION;
- else if (TYPE_CODE (type) == TYPE_CODE_FLT
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ 0x673d, 0xffff}
+ , /* move $s1,sp */
+ {
+ 0xd980, 0xff80}
+ , /* sw $a0-$a3,n($s1) */
+ {
+ 0x6704, 0xff1c}
+ , /* move reg,$a0-$a3 */
+ {
+ 0xe809, 0xf81f}
+ , /* entry pseudo-op */
{
- /* A floating-point value belongs in the least significant part
- of FP0. */
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n");
- mips_xfer_register (regcache,
- NUM_REGS + mips_regnum (current_gdbarch)->fp0,
- TYPE_LENGTH (type),
- TARGET_BYTE_ORDER, readbuf, writebuf, 0);
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- && TYPE_NFIELDS (type) <= 2
- && TYPE_NFIELDS (type) >= 1
- && ((TYPE_NFIELDS (type) == 1
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT))
- || (TYPE_NFIELDS (type) == 2
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0))
- == TYPE_CODE_FLT)
- && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1))
- == TYPE_CODE_FLT)))
- && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ 0x0100, 0xff00}
+ , /* addiu $s1,$sp,n */
{
- /* A struct that contains one or two floats. Each value is part
- in the least significant part of their floating point
- register.. */
- bfd_byte reg[MAX_REGISTER_SIZE];
- int regnum;
- int field;
- for (field = 0, regnum = mips_regnum (current_gdbarch)->fp0;
- field < TYPE_NFIELDS (type);
- field++, regnum += 2)
- {
- int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field])
- / TARGET_CHAR_BIT);
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset);
- mips_xfer_register (regcache, NUM_REGS + regnum,
- TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)),
- TARGET_BYTE_ORDER, readbuf, writebuf, offset);
- }
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
- else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
- || TYPE_CODE (type) == TYPE_CODE_UNION)
+ 0, 0} /* end of table marker */
+ };
+
+ /* Find an upper bound on the prologue. */
+ end_pc = skip_prologue_using_sal (pc);
+ if (end_pc == 0)
+ end_pc = pc + 100; /* Magic. */
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (; pc < end_pc; pc += MIPS16_INSTLEN)
{
- /* A structure or union. Extract the left justified value,
- regardless of the byte order. I.e. DO NOT USE
- mips_xfer_lower. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += register_size (current_gdbarch, regnum), regnum++)
+ unsigned short inst;
+ int i;
+
+ inst = mips_fetch_instruction (pc);
+
+ /* Normally we ignore an extend instruction. However, if it is
+ not followed by a valid prologue instruction, we must adjust
+ the pc back over the extend so that it won't be considered
+ part of the prologue. */
+ if ((inst & 0xf800) == 0xf000) /* extend */
{
- int xfer = register_size (current_gdbarch, regnum);
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
- BFD_ENDIAN_UNKNOWN, readbuf, writebuf, offset);
+ extend_bytes = MIPS16_INSTLEN;
+ continue;
}
- return RETURN_VALUE_REGISTER_CONVENTION;
- }
- else
- {
- /* A scalar extract each part but least-significant-byte
- justified. */
- int offset;
- int regnum;
- for (offset = 0, regnum = V0_REGNUM;
- offset < TYPE_LENGTH (type);
- offset += register_size (current_gdbarch, regnum), regnum++)
+ prev_extend_bytes = extend_bytes;
+ extend_bytes = 0;
+
+ /* Check for other valid prologue instructions besides extend. */
+ for (i = 0; table[i].mask != 0; i++)
+ if ((inst & table[i].mask) == table[i].inst) /* found, get out */
+ break;
+ if (table[i].mask != 0) /* it was in table? */
+ continue; /* ignore it */
+ else
+ /* non-prologue */
{
- int xfer = register_size (current_gdbarch, regnum);
- int pos = 0;
- if (offset + xfer > TYPE_LENGTH (type))
- xfer = TYPE_LENGTH (type) - offset;
- if (mips_debug)
- fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n",
- offset, xfer, regnum);
- mips_xfer_register (regcache, NUM_REGS + regnum, xfer,
- TARGET_BYTE_ORDER, readbuf, writebuf, offset);
+ /* Return the current pc, adjusted backwards by 2 if
+ the previous instruction was an extend. */
+ return pc - prev_extend_bytes;
}
- return RETURN_VALUE_REGISTER_CONVENTION;
}
+ return pc;
}
+/* To skip prologues, I use this predicate. Returns either PC itself
+ if the code at PC does not look like a function prologue; otherwise
+ returns an address that (if we're lucky) follows the prologue. If
+ LENIENT, then we must skip everything which is involved in setting
+ up the frame (it's OK to skip more, just so long as we don't skip
+ anything which might clobber the registers which are being saved.
+ We must skip more in the case where part of the prologue is in the
+ delay slot of a non-prologue instruction). */
+
static CORE_ADDR
-mips_extract_struct_value_address (struct regcache *regcache)
+mips_skip_prologue (CORE_ADDR pc)
{
- /* FIXME: This will only work at random. The caller passes the
- struct_return address in V0, but it is not preserved. It may
- still be there, or this may be a random value. */
- LONGEST val;
+ /* See if we can determine the end of the prologue via the symbol table.
+ If so, then return either PC, or the PC after the prologue, whichever
+ is greater. */
- regcache_cooked_read_signed (regcache, V0_REGNUM, &val);
- return val;
-}
+ CORE_ADDR post_prologue_pc = after_prologue (pc, NULL);
-/* Exported procedure: Is PC in the signal trampoline code */
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
-static int
-mips_pc_in_sigtramp (CORE_ADDR pc, char *ignore)
-{
- if (sigtramp_address == 0)
- fixup_sigtramp ();
- return (pc >= sigtramp_address && pc < sigtramp_end);
+ /* Can't determine prologue from the symbol table, need to examine
+ instructions. */
+
+ if (pc_is_mips16 (pc))
+ return mips16_skip_prologue (pc);
+ else
+ return mips32_skip_prologue (pc);
}
/* Root of all "set mips "/"show mips " commands. This will eventually be
static void
set_mips_command (char *args, int from_tty)
{
- printf_unfiltered ("\"set mips\" must be followed by an appropriate subcommand.\n");
+ printf_unfiltered
+ ("\"set mips\" must be followed by an appropriate subcommand.\n");
help_list (setmipscmdlist, "set mips ", all_commands, gdb_stdout);
}
internal_error (__FILE__, __LINE__, "bad switch");
}
if (mips_fpu_type_auto)
- printf_unfiltered ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
- fpu);
+ printf_unfiltered
+ ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
+ fpu);
else
- printf_unfiltered ("The MIPS floating-point coprocessor is assumed to be %s\n",
- fpu);
+ printf_unfiltered
+ ("The MIPS floating-point coprocessor is assumed to be %s\n", fpu);
}
static void
set_mipsfpu_command (char *args, int from_tty)
{
- printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
+ printf_unfiltered
+ ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
show_mipsfpu_command (args, from_tty);
}
static void
set_mipsfpu_single_command (char *args, int from_tty)
{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
mips_fpu_type = MIPS_FPU_SINGLE;
mips_fpu_type_auto = 0;
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_SINGLE;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "set mipsfpu failed");
}
static void
set_mipsfpu_double_command (char *args, int from_tty)
{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
mips_fpu_type = MIPS_FPU_DOUBLE;
mips_fpu_type_auto = 0;
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_DOUBLE;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "set mipsfpu failed");
}
static void
set_mipsfpu_none_command (char *args, int from_tty)
{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
mips_fpu_type = MIPS_FPU_NONE;
mips_fpu_type_auto = 0;
- gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_NONE;
+ /* FIXME: cagney/2003-11-15: Should be setting a field in "info"
+ instead of relying on globals. Doing that would let generic code
+ handle the search for this specific architecture. */
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__, "set mipsfpu failed");
}
static void
if (proc_desc)
{
if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
- info->mach = bfd_mach_mips16;
+ info->mach = bfd_mach_mips16;
}
else
{
if (pc_is_mips16 (memaddr))
- info->mach = bfd_mach_mips16;
- }
+ info->mach = bfd_mach_mips16;
+ }
/* Round down the instruction address to the appropriate boundary. */
memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3);
/* Set the disassembler options. */
- if (tdep->mips_abi == MIPS_ABI_N32
- || tdep->mips_abi == MIPS_ABI_N64)
+ if (tdep->mips_abi == MIPS_ABI_N32 || tdep->mips_abi == MIPS_ABI_N64)
{
/* Set up the disassembler info, so that we get the right
- register names from libopcodes. */
+ register names from libopcodes. */
if (tdep->mips_abi == MIPS_ABI_N32)
info->disassembler_options = "gpr-names=n32";
else
breakpoint should be inserted. */
static const unsigned char *
-mips_breakpoint_from_pc (CORE_ADDR * pcptr, int *lenptr)
+mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
{
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
if (pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_big_breakpoint[] = {0xe8, 0xa5};
+ static unsigned char mips16_big_breakpoint[] = { 0xe8, 0xa5 };
*pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_big_breakpoint);
return mips16_big_breakpoint;
/* The IDT board uses an unusual breakpoint value, and
sometimes gets confused when it sees the usual MIPS
breakpoint instruction. */
- static unsigned char big_breakpoint[] = {0, 0x5, 0, 0xd};
- static unsigned char pmon_big_breakpoint[] = {0, 0, 0, 0xd};
- static unsigned char idt_big_breakpoint[] = {0, 0, 0x0a, 0xd};
+ static unsigned char big_breakpoint[] = { 0, 0x5, 0, 0xd };
+ static unsigned char pmon_big_breakpoint[] = { 0, 0, 0, 0xd };
+ static unsigned char idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd };
*lenptr = sizeof (big_breakpoint);
{
if (pc_is_mips16 (*pcptr))
{
- static unsigned char mips16_little_breakpoint[] = {0xa5, 0xe8};
+ static unsigned char mips16_little_breakpoint[] = { 0xa5, 0xe8 };
*pcptr = unmake_mips16_addr (*pcptr);
*lenptr = sizeof (mips16_little_breakpoint);
return mips16_little_breakpoint;
}
else
{
- static unsigned char little_breakpoint[] = {0xd, 0, 0x5, 0};
- static unsigned char pmon_little_breakpoint[] = {0xd, 0, 0, 0};
- static unsigned char idt_little_breakpoint[] = {0xd, 0x0a, 0, 0};
+ static unsigned char little_breakpoint[] = { 0xd, 0, 0x5, 0 };
+ static unsigned char pmon_little_breakpoint[] = { 0xd, 0, 0, 0 };
+ static unsigned char idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 };
*lenptr = sizeof (little_breakpoint);
int i;
/* See if the name of the target function is __fn_stub_*. */
- if (find_pc_partial_function (target_pc, &name, NULL, NULL) == 0)
+ if (find_pc_partial_function (target_pc, &name, NULL, NULL) ==
+ 0)
return target_pc;
if (strncmp (name, "__fn_stub_", 10) != 0
&& strcmp (name, "etext") != 0
/* Find the starting address of the function containing the PC. If the
caller didn't give us a name, look it up at the same time. */
- if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == 0)
+ if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) ==
+ 0)
return 0;
if (strncmp (name, "__mips16_call_stub_", 19) == 0)
/* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
i.e. after the jal instruction, this is effectively a return stub. */
if (strncmp (name, "__mips16_call_stub_", 19) == 0
- && (name[19] == 's' || name[19] == 'd')
- && pc != start_addr)
+ && (name[19] == 's' || name[19] == 'd') && pc != start_addr)
return 1;
return 0; /* not a stub */
}
-/* Return non-zero if the PC is in a library helper function that should
- be ignored. This implements the IGNORE_HELPER_CALL macro. */
+/* Return non-zero if the PC is in a library helper function that
+ should be ignored. This implements the
+ DEPRECATED_IGNORE_HELPER_CALL macro. */
int
mips_ignore_helper (CORE_ADDR pc)
}
-/* When debugging a 64 MIPS target running a 32 bit ABI, the size of
- the register stored on the stack (32) is different to its real raw
- size (64). The below ensures that registers are fetched from the
- stack using their ABI size and then stored into the RAW_BUFFER
- using their raw size.
-
- The alternative to adding this function would be to add an ABI
- macro - REGISTER_STACK_SIZE(). */
-
-static void
-mips_get_saved_register (char *raw_buffer,
- int *optimizedp,
- CORE_ADDR *addrp,
- struct frame_info *frame,
- int regnum,
- enum lval_type *lvalp)
-{
- CORE_ADDR addrx;
- enum lval_type lvalx;
- int optimizedx;
- int realnumx;
-
- /* Always a pseudo. */
- gdb_assert (regnum >= NUM_REGS);
-
- /* Make certain that all needed parameters are present. */
- if (addrp == NULL)
- addrp = &addrx;
- if (lvalp == NULL)
- lvalp = &lvalx;
- if (optimizedp == NULL)
- optimizedp = &optimizedx;
-
- if ((regnum % NUM_REGS) == SP_REGNUM)
- /* The SP_REGNUM is special, its value is stored in saved_regs.
- In fact, it is so special that it can even only be fetched
- using a raw register number! Once this code as been converted
- to frame-unwind the problem goes away. */
- frame_register_unwind (deprecated_get_next_frame_hack (frame),
- regnum % NUM_REGS, optimizedp, lvalp, addrp,
- &realnumx, raw_buffer);
- else
- /* Get it from the next frame. */
- frame_register_unwind (deprecated_get_next_frame_hack (frame),
- regnum, optimizedp, lvalp, addrp,
- &realnumx, raw_buffer);
-}
-
-/* Immediately after a function call, return the saved pc.
- Can't always go through the frames for this because on some machines
- the new frame is not set up until the new function executes
- some instructions. */
-
-static CORE_ADDR
-mips_saved_pc_after_call (struct frame_info *frame)
-{
- return read_signed_register (RA_REGNUM);
-}
-
-
/* Convert a dbx stab register number (from `r' declaration) to a GDB
[1 * NUM_REGS .. 2 * NUM_REGS) REGNUM. */
&& REGISTER_NAME (NUM_REGS + regnum)[0] != '\0')
return regnum;
else
- return LEGACY_SIM_REGNO_IGNORE;
+ return LEGACY_SIM_REGNO_IGNORE;
}
if (mips_abi_strings[i] == mips_abi_string)
return (enum mips_abi) i;
- internal_error (__FILE__, __LINE__,
- "unknown ABI string");
+ internal_error (__FILE__, __LINE__, "unknown ABI string");
}
static struct gdbarch *
-mips_gdbarch_init (struct gdbarch_info info,
- struct gdbarch_list *arches)
+mips_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
int elf_flags;
enum mips_abi mips_abi, found_abi, wanted_abi;
int num_regs;
+ enum mips_fpu_type fpu_type;
/* First of all, extract the elf_flags, if available. */
if (info.abfd && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
elf_flags = elf_elfheader (info.abfd)->e_flags;
+ else if (arches != NULL)
+ elf_flags = gdbarch_tdep (arches->gdbarch)->elf_flags;
else
elf_flags = 0;
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog,
- "mips_gdbarch_init: elf_flags = 0x%08x\n",
- elf_flags);
+ "mips_gdbarch_init: elf_flags = 0x%08x\n", elf_flags);
/* Check ELF_FLAGS to see if it specifies the ABI being used. */
switch ((elf_flags & EF_MIPS_ABI))
if (found_abi == MIPS_ABI_UNKNOWN && info.abfd != NULL)
bfd_map_over_sections (info.abfd, mips_find_abi_section, &found_abi);
- /* If we have no usefu BFD information, use the ABI from the last
+ /* If we have no useful BFD information, use the ABI from the last
MIPS architecture (if there is one). */
if (found_abi == MIPS_ABI_UNKNOWN && info.abfd == NULL && arches != NULL)
found_abi = gdbarch_tdep (arches->gdbarch)->found_abi;
"mips_gdbarch_init: mips64_transfers_32bit_regs_p = %d\n",
mips64_transfers_32bit_regs_p);
+ /* Determine the MIPS FPU type. */
+ if (!mips_fpu_type_auto)
+ fpu_type = mips_fpu_type;
+ else if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips)
+ switch (info.bfd_arch_info->mach)
+ {
+ case bfd_mach_mips3900:
+ case bfd_mach_mips4100:
+ case bfd_mach_mips4111:
+ case bfd_mach_mips4120:
+ fpu_type = MIPS_FPU_NONE;
+ break;
+ case bfd_mach_mips4650:
+ fpu_type = MIPS_FPU_SINGLE;
+ break;
+ default:
+ fpu_type = MIPS_FPU_DOUBLE;
+ break;
+ }
+ else if (arches != NULL)
+ fpu_type = gdbarch_tdep (arches->gdbarch)->mips_fpu_type;
+ else
+ fpu_type = MIPS_FPU_DOUBLE;
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: fpu_type = %d\n", fpu_type);
+
/* try to find a pre-existing architecture */
for (arches = gdbarch_list_lookup_by_info (arches, &info);
arches != NULL;
if (gdbarch_tdep (arches->gdbarch)->mips64_transfers_32bit_regs_p
!= mips64_transfers_32bit_regs_p)
continue;
+ /* Be pedantic about which FPU is selected. */
+ if (gdbarch_tdep (arches->gdbarch)->mips_fpu_type != fpu_type)
+ continue;
return arches->gdbarch;
}
tdep->mips64_transfers_32bit_regs_p = mips64_transfers_32bit_regs_p;
tdep->found_abi = found_abi;
tdep->mips_abi = mips_abi;
+ tdep->mips_fpu_type = fpu_type;
/* Initially set everything according to the default ABI/ISA. */
set_gdbarch_short_bit (gdbarch, 16);
set_gdbarch_pseudo_register_read (gdbarch, mips_pseudo_register_read);
set_gdbarch_pseudo_register_write (gdbarch, mips_pseudo_register_write);
- set_gdbarch_elf_make_msymbol_special (gdbarch,
+ set_gdbarch_elf_make_msymbol_special (gdbarch,
mips_elf_make_msymbol_special);
/* Fill in the OS dependant register numbers and names. */
}
/* FIXME: cagney/2003-11-15: For MIPS, hasn't PC_REGNUM been
replaced by read_pc? */
- set_gdbarch_pc_regnum (gdbarch, regnum->pc);
+ set_gdbarch_pc_regnum (gdbarch, regnum->pc + num_regs);
+ set_gdbarch_sp_regnum (gdbarch, MIPS_SP_REGNUM + num_regs);
set_gdbarch_fp0_regnum (gdbarch, regnum->fp0);
set_gdbarch_num_regs (gdbarch, num_regs);
set_gdbarch_num_pseudo_regs (gdbarch, num_regs);
case MIPS_ABI_O32:
set_gdbarch_push_dummy_call (gdbarch, mips_o32_push_dummy_call);
set_gdbarch_return_value (gdbarch, mips_o32_return_value);
- tdep->mips_default_saved_regsize = 4;
- tdep->mips_default_stack_argsize = 4;
- tdep->mips_fp_register_double = 0;
tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 4 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_deprecated_reg_struct_has_addr
- (gdbarch, mips_o32_reg_struct_has_addr);
break;
case MIPS_ABI_O64:
set_gdbarch_push_dummy_call (gdbarch, mips_o64_push_dummy_call);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_o64_store_return_value);
- set_gdbarch_deprecated_extract_return_value (gdbarch, mips_o64_extract_return_value);
- tdep->mips_default_saved_regsize = 8;
- tdep->mips_default_stack_argsize = 8;
- tdep->mips_fp_register_double = 1;
+ set_gdbarch_deprecated_store_return_value (gdbarch,
+ mips_o64_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch,
+ mips_o64_extract_return_value);
tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 4 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_deprecated_reg_struct_has_addr
- (gdbarch, mips_o32_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch, always_use_struct_convention);
+ set_gdbarch_deprecated_use_struct_convention (gdbarch, always_use_struct_convention);
break;
case MIPS_ABI_EABI32:
set_gdbarch_push_dummy_call (gdbarch, mips_eabi_push_dummy_call);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value);
- set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value);
- tdep->mips_default_saved_regsize = 4;
- tdep->mips_default_stack_argsize = 4;
- tdep->mips_fp_register_double = 0;
+ set_gdbarch_deprecated_store_return_value (gdbarch,
+ mips_eabi_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch,
+ mips_eabi_extract_return_value);
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_long_bit (gdbarch, 64);
set_gdbarch_deprecated_reg_struct_has_addr
(gdbarch, mips_eabi_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch,
- mips_eabi_use_struct_convention);
+ set_gdbarch_deprecated_use_struct_convention (gdbarch, mips_eabi_use_struct_convention);
break;
case MIPS_ABI_EABI64:
set_gdbarch_push_dummy_call (gdbarch, mips_eabi_push_dummy_call);
- set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value);
- set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value);
- tdep->mips_default_saved_regsize = 8;
- tdep->mips_default_stack_argsize = 8;
- tdep->mips_fp_register_double = 1;
+ set_gdbarch_deprecated_store_return_value (gdbarch,
+ mips_eabi_store_return_value);
+ set_gdbarch_deprecated_extract_return_value (gdbarch,
+ mips_eabi_extract_return_value);
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_long_bit (gdbarch, 64);
set_gdbarch_deprecated_reg_struct_has_addr
(gdbarch, mips_eabi_reg_struct_has_addr);
- set_gdbarch_use_struct_convention (gdbarch,
- mips_eabi_use_struct_convention);
+ set_gdbarch_deprecated_use_struct_convention (gdbarch, mips_eabi_use_struct_convention);
break;
case MIPS_ABI_N32:
set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
set_gdbarch_return_value (gdbarch, mips_n32n64_return_value);
- tdep->mips_default_saved_regsize = 8;
- tdep->mips_default_stack_argsize = 8;
- tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_deprecated_reg_struct_has_addr
- (gdbarch, mips_n32n64_reg_struct_has_addr);
+ set_gdbarch_long_double_bit (gdbarch, 128);
+ set_gdbarch_long_double_format (gdbarch,
+ &floatformat_n32n64_long_double_big);
break;
case MIPS_ABI_N64:
set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
set_gdbarch_return_value (gdbarch, mips_n32n64_return_value);
- tdep->mips_default_saved_regsize = 8;
- tdep->mips_default_stack_argsize = 8;
- tdep->mips_fp_register_double = 1;
tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1;
tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 64);
set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_deprecated_reg_struct_has_addr
- (gdbarch, mips_n32n64_reg_struct_has_addr);
+ set_gdbarch_long_double_bit (gdbarch, 128);
+ set_gdbarch_long_double_format (gdbarch,
+ &floatformat_n32n64_long_double_big);
break;
default:
- internal_error (__FILE__, __LINE__,
- "unknown ABI in switch");
+ internal_error (__FILE__, __LINE__, "unknown ABI in switch");
}
/* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE
the current gcc - it would make GDB treat these 64-bit programs
as 32-bit programs by default. */
- /* enable/disable the MIPS FPU */
- if (!mips_fpu_type_auto)
- tdep->mips_fpu_type = mips_fpu_type;
- else if (info.bfd_arch_info != NULL
- && info.bfd_arch_info->arch == bfd_arch_mips)
- switch (info.bfd_arch_info->mach)
- {
- case bfd_mach_mips3900:
- case bfd_mach_mips4100:
- case bfd_mach_mips4111:
- tdep->mips_fpu_type = MIPS_FPU_NONE;
- break;
- case bfd_mach_mips4650:
- tdep->mips_fpu_type = MIPS_FPU_SINGLE;
- break;
- default:
- tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
- break;
- }
- else
- tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
-
set_gdbarch_read_pc (gdbarch, mips_read_pc);
- set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
- set_gdbarch_deprecated_target_read_fp (gdbarch, mips_read_sp); /* Draft FRAME base. */
+ set_gdbarch_write_pc (gdbarch, mips_write_pc);
set_gdbarch_read_sp (gdbarch, mips_read_sp);
/* Add/remove bits from an address. The MIPS needs be careful to
ensure that all 32 bit addresses are sign extended to 64 bits. */
set_gdbarch_addr_bits_remove (gdbarch, mips_addr_bits_remove);
- /* There's a mess in stack frame creation. See comments in
- blockframe.c near reference to DEPRECATED_INIT_FRAME_PC_FIRST. */
- set_gdbarch_deprecated_init_frame_pc_first (gdbarch, mips_init_frame_pc_first);
+ /* Unwind the frame. */
+ set_gdbarch_unwind_pc (gdbarch, mips_unwind_pc);
+ set_gdbarch_unwind_dummy_id (gdbarch, mips_unwind_dummy_id);
/* Map debug register numbers onto internal register numbers. */
set_gdbarch_stab_reg_to_regnum (gdbarch, mips_stab_reg_to_regnum);
- set_gdbarch_ecoff_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
- set_gdbarch_dwarf_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
- set_gdbarch_dwarf2_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch,
+ mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch,
+ mips_dwarf_dwarf2_ecoff_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch,
+ mips_dwarf_dwarf2_ecoff_reg_to_regnum);
set_gdbarch_register_sim_regno (gdbarch, mips_register_sim_regno);
- /* Initialize a frame */
- set_gdbarch_deprecated_frame_init_saved_regs (gdbarch, mips_find_saved_regs);
- set_gdbarch_deprecated_init_extra_frame_info (gdbarch, mips_init_extra_frame_info);
-
/* MIPS version of CALL_DUMMY */
/* NOTE: cagney/2003-08-05: Eventually call dummy location will be
replaced by a command, and all targets will default to on stack
(regardless of the stack's execute status). */
set_gdbarch_call_dummy_location (gdbarch, AT_SYMBOL);
- set_gdbarch_deprecated_pop_frame (gdbarch, mips_pop_frame);
set_gdbarch_frame_align (gdbarch, mips_frame_align);
- set_gdbarch_deprecated_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
- set_gdbarch_deprecated_frame_chain (gdbarch, mips_frame_chain);
- set_gdbarch_frameless_function_invocation (gdbarch,
- generic_frameless_function_invocation_not);
- set_gdbarch_deprecated_frame_saved_pc (gdbarch, mips_frame_saved_pc);
- set_gdbarch_frame_args_skip (gdbarch, 0);
-
- set_gdbarch_deprecated_get_saved_register (gdbarch, mips_get_saved_register);
+ set_gdbarch_convert_register_p (gdbarch, mips_convert_register_p);
+ set_gdbarch_register_to_value (gdbarch, mips_register_to_value);
+ set_gdbarch_value_to_register (gdbarch, mips_value_to_register);
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_breakpoint_from_pc (gdbarch, mips_breakpoint_from_pc);
- set_gdbarch_decr_pc_after_break (gdbarch, 0);
set_gdbarch_skip_prologue (gdbarch, mips_skip_prologue);
- set_gdbarch_deprecated_saved_pc_after_call (gdbarch, mips_saved_pc_after_call);
set_gdbarch_pointer_to_address (gdbarch, signed_pointer_to_address);
set_gdbarch_address_to_pointer (gdbarch, address_to_signed_pointer);
set_gdbarch_integer_to_address (gdbarch, mips_integer_to_address);
- set_gdbarch_function_start_offset (gdbarch, 0);
-
set_gdbarch_register_type (gdbarch, mips_register_type);
set_gdbarch_print_registers_info (gdbarch, mips_print_registers_info);
- set_gdbarch_pc_in_sigtramp (gdbarch, mips_pc_in_sigtramp);
set_gdbarch_print_insn (gdbarch, gdb_print_insn_mips);
is sitting on? */
set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1);
+ set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_stub);
+
+ /* NOTE drow/2004-02-11: We overload the core solib trampoline code
+ to support MIPS16. This is a bad thing. Make sure not to do it
+ if we have an OS ABI that actually supports shared libraries, since
+ shared library support is more important. If we have an OS someday
+ that supports both shared libraries and MIPS16, we'll have to find
+ a better place for these. */
+ if (info.osabi == GDB_OSABI_UNKNOWN)
+ {
+ set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub);
+ set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_return_stub);
+ }
+
/* Hook in OS ABI-specific overrides, if they have been registered. */
gdbarch_init_osabi (info, gdbarch);
- set_gdbarch_extract_struct_value_address (gdbarch,
- mips_extract_struct_value_address);
-
- set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_stub);
-
- set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub);
- set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_return_stub);
+ /* Unwind the frame. */
+ frame_unwind_append_sniffer (gdbarch, mips_stub_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, mips_mdebug_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, mips_insn16_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, mips_insn32_frame_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_stub_frame_base_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_mdebug_frame_base_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_insn16_frame_base_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_insn32_frame_base_sniffer);
return gdbarch;
}
static void
-mips_abi_update (char *ignore_args, int from_tty,
- struct cmd_list_element *c)
+mips_abi_update (char *ignore_args, int from_tty, struct cmd_list_element *c)
{
struct gdbarch_info info;
show_mips_abi (char *ignore_args, int from_tty)
{
if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_mips)
- printf_filtered (
- "The MIPS ABI is unknown because the current architecture is not MIPS.\n");
+ printf_filtered
+ ("The MIPS ABI is unknown because the current architecture is not MIPS.\n");
else
{
enum mips_abi global_abi = global_mips_abi ();
const char *actual_abi_str = mips_abi_strings[actual_abi];
if (global_abi == MIPS_ABI_UNKNOWN)
- printf_filtered ("The MIPS ABI is set automatically (currently \"%s\").\n",
- actual_abi_str);
+ printf_filtered
+ ("The MIPS ABI is set automatically (currently \"%s\").\n",
+ actual_abi_str);
else if (global_abi == actual_abi)
- printf_filtered (
- "The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
- actual_abi_str);
+ printf_filtered
+ ("The MIPS ABI is assumed to be \"%s\" (due to user setting).\n",
+ actual_abi_str);
else
{
/* Probably shouldn't happen... */
- printf_filtered (
- "The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
- actual_abi_str,
- mips_abi_strings[global_abi]);
+ printf_filtered
+ ("The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n",
+ actual_abi_str, mips_abi_strings[global_abi]);
}
}
}
ef_mips_arch);
fprintf_unfiltered (file,
"mips_dump_tdep: tdep->mips_abi = %d (%s)\n",
- tdep->mips_abi,
- mips_abi_strings[tdep->mips_abi]);
+ tdep->mips_abi, mips_abi_strings[tdep->mips_abi]);
fprintf_unfiltered (file,
"mips_dump_tdep: mips_mask_address_p() %d (default %d)\n",
mips_mask_address_p (tdep),
tdep->default_mask_address_p);
}
- fprintf_unfiltered (file,
- "mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
- FP_REGISTER_DOUBLE);
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_DEFAULT_FPU_TYPE = %d (%s)\n",
MIPS_DEFAULT_FPU_TYPE,
: MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_SINGLE ? "single"
: MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_DOUBLE ? "double"
: "???"));
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_EABI = %d\n",
- MIPS_EABI);
+ fprintf_unfiltered (file, "mips_dump_tdep: MIPS_EABI = %d\n", MIPS_EABI);
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_FPU_TYPE = %d (%s)\n",
MIPS_FPU_TYPE,
: MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? "single"
: MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? "double"
: "???"));
- fprintf_unfiltered (file,
- "mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
- FP_REGISTER_DOUBLE);
fprintf_unfiltered (file,
"mips_dump_tdep: mips_stack_argsize() = %d\n",
- mips_stack_argsize (tdep));
- fprintf_unfiltered (file,
- "mips_dump_tdep: A0_REGNUM = %d\n",
- A0_REGNUM);
+ mips_stack_argsize (current_gdbarch));
+ fprintf_unfiltered (file, "mips_dump_tdep: A0_REGNUM = %d\n", A0_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: ADDR_BITS_REMOVE # %s\n",
- XSTRING (ADDR_BITS_REMOVE(ADDR)));
+ XSTRING (ADDR_BITS_REMOVE (ADDR)));
fprintf_unfiltered (file,
"mips_dump_tdep: ATTACH_DETACH # %s\n",
XSTRING (ATTACH_DETACH));
"mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n",
FIRST_EMBED_REGNUM);
fprintf_unfiltered (file,
- "mips_dump_tdep: IGNORE_HELPER_CALL # %s\n",
- XSTRING (IGNORE_HELPER_CALL (PC)));
+ "mips_dump_tdep: DEPRECATED_IGNORE_HELPER_CALL # %s\n",
+ XSTRING (DEPRECATED_IGNORE_HELPER_CALL (PC)));
fprintf_unfiltered (file,
"mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n",
XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME)));
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS16_INSTLEN = %d\n",
MIPS16_INSTLEN);
- fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_EFI_SYMBOL_NAME = multi-arch!!\n");
fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_INSTLEN = %d\n",
- MIPS_INSTLEN);
+ "mips_dump_tdep: MIPS_INSTLEN = %d\n", MIPS_INSTLEN);
fprintf_unfiltered (file,
"mips_dump_tdep: MIPS_LAST_ARG_REGNUM = %d (%d regs)\n",
MIPS_LAST_ARG_REGNUM,
MIPS_LAST_ARG_REGNUM - A0_REGNUM + 1);
fprintf_unfiltered (file,
- "mips_dump_tdep: MIPS_NUMREGS = %d\n",
- MIPS_NUMREGS);
+ "mips_dump_tdep: MIPS_NUMREGS = %d\n", MIPS_NUMREGS);
fprintf_unfiltered (file,
- "mips_dump_tdep: mips_saved_regsize() = %d\n",
- mips_saved_regsize (tdep));
+ "mips_dump_tdep: mips_abi_regsize() = %d\n",
+ mips_abi_regsize (current_gdbarch));
fprintf_unfiltered (file,
- "mips_dump_tdep: PRID_REGNUM = %d\n",
- PRID_REGNUM);
+ "mips_dump_tdep: PRID_REGNUM = %d\n", PRID_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: PROC_DESC_IS_DUMMY = function?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: PROC_FRAME_ADJUST = function?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: PROC_FRAME_OFFSET = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FRAME_REG = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FREG_MASK = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_PC_REG = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_REG_MASK = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PROC_SYMBOL = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: PS_REGNUM = %d\n",
- PS_REGNUM);
- fprintf_unfiltered (file,
- "mips_dump_tdep: RA_REGNUM = %d\n",
- RA_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_FRAME_REG = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_MASK = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_PC_REG = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_MASK = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PROC_SYMBOL = function?\n");
+ fprintf_unfiltered (file, "mips_dump_tdep: PS_REGNUM = %d\n", PS_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: RA_REGNUM = %d\n", RA_REGNUM);
#ifdef SAVED_BYTES
fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_BYTES = %d\n",
- SAVED_BYTES);
+ "mips_dump_tdep: SAVED_BYTES = %d\n", SAVED_BYTES);
#endif
#ifdef SAVED_FP
- fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_FP = %d\n",
- SAVED_FP);
+ fprintf_unfiltered (file, "mips_dump_tdep: SAVED_FP = %d\n", SAVED_FP);
#endif
#ifdef SAVED_PC
- fprintf_unfiltered (file,
- "mips_dump_tdep: SAVED_PC = %d\n",
- SAVED_PC);
+ fprintf_unfiltered (file, "mips_dump_tdep: SAVED_PC = %d\n", SAVED_PC);
#endif
fprintf_unfiltered (file,
"mips_dump_tdep: SETUP_ARBITRARY_FRAME # %s\n",
XSTRING (SETUP_ARBITRARY_FRAME (NUMARGS, ARGS)));
fprintf_unfiltered (file,
"mips_dump_tdep: SET_PROC_DESC_IS_DUMMY = function?\n");
- fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_BASE = %d\n",
- SIGFRAME_BASE);
- fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_FPREGSAVE_OFF = %d\n",
- SIGFRAME_FPREGSAVE_OFF);
- fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_PC_OFF = %d\n",
- SIGFRAME_PC_OFF);
- fprintf_unfiltered (file,
- "mips_dump_tdep: SIGFRAME_REGSAVE_OFF = %d\n",
- SIGFRAME_REGSAVE_OFF);
fprintf_unfiltered (file,
"mips_dump_tdep: SKIP_TRAMPOLINE_CODE # %s\n",
XSTRING (SKIP_TRAMPOLINE_CODE (PC)));
fprintf_unfiltered (file,
"mips_dump_tdep: STOPPED_BY_WATCHPOINT # %s\n",
XSTRING (STOPPED_BY_WATCHPOINT (WS)));
- fprintf_unfiltered (file,
- "mips_dump_tdep: T9_REGNUM = %d\n",
- T9_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: T9_REGNUM = %d\n", T9_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: TABULAR_REGISTER_OUTPUT = used?\n");
fprintf_unfiltered (file,
"mips_dump_tdep: TARGET_CAN_USE_HARDWARE_WATCHPOINT # %s\n",
- XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT (TYPE,CNT,OTHERTYPE)));
+ XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT
+ (TYPE, CNT, OTHERTYPE)));
fprintf_unfiltered (file,
"mips_dump_tdep: TARGET_HAS_HARDWARE_WATCHPOINTS # %s\n",
XSTRING (TARGET_HAS_HARDWARE_WATCHPOINTS));
#endif
#ifdef TRACE_FLAVOR
fprintf_unfiltered (file,
- "mips_dump_tdep: TRACE_FLAVOR = %d\n",
- TRACE_FLAVOR);
+ "mips_dump_tdep: TRACE_FLAVOR = %d\n", TRACE_FLAVOR);
#endif
#ifdef TRACE_FLAVOR_SIZE
fprintf_unfiltered (file,
#ifdef TRACE_SET
fprintf_unfiltered (file,
"mips_dump_tdep: TRACE_SET # %s\n",
- XSTRING (TRACE_SET (X,STATE)));
+ XSTRING (TRACE_SET (X, STATE)));
#endif
#ifdef UNUSED_REGNUM
fprintf_unfiltered (file,
- "mips_dump_tdep: UNUSED_REGNUM = %d\n",
- UNUSED_REGNUM);
+ "mips_dump_tdep: UNUSED_REGNUM = %d\n", UNUSED_REGNUM);
#endif
- fprintf_unfiltered (file,
- "mips_dump_tdep: V0_REGNUM = %d\n",
- V0_REGNUM);
+ fprintf_unfiltered (file, "mips_dump_tdep: V0_REGNUM = %d\n", V0_REGNUM);
fprintf_unfiltered (file,
"mips_dump_tdep: VM_MIN_ADDRESS = %ld\n",
(long) VM_MIN_ADDRESS);
fprintf_unfiltered (file,
- "mips_dump_tdep: ZERO_REGNUM = %d\n",
- ZERO_REGNUM);
+ "mips_dump_tdep: ZERO_REGNUM = %d\n", ZERO_REGNUM);
fprintf_unfiltered (file,
- "mips_dump_tdep: _PROC_MAGIC_ = %d\n",
- _PROC_MAGIC_);
+ "mips_dump_tdep: _PROC_MAGIC_ = %d\n", _PROC_MAGIC_);
}
-extern initialize_file_ftype _initialize_mips_tdep; /* -Wmissing-prototypes */
+extern initialize_file_ftype _initialize_mips_tdep; /* -Wmissing-prototypes */
void
_initialize_mips_tdep (void)
static struct cmd_list_element *mipsfpulist = NULL;
struct cmd_list_element *c;
- mips_abi_string = mips_abi_strings [MIPS_ABI_UNKNOWN];
+ mips_abi_string = mips_abi_strings[MIPS_ABI_UNKNOWN];
if (MIPS_ABI_LAST + 1
!= sizeof (mips_abi_strings) / sizeof (mips_abi_strings[0]))
internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync");
gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
+ mips_pdr_data = register_objfile_data ();
+
/* Add root prefix command for all "set mips"/"show mips" commands */
add_prefix_cmd ("mips", no_class, set_mips_command,
"Various MIPS specific commands.",
&showmipscmdlist, "show mips ", 0, &showlist);
/* Allow the user to override the saved register size. */
- add_show_from_set (add_set_enum_cmd ("saved-gpreg-size",
- class_obscure,
- size_enums,
- &mips_saved_regsize_string, "\
+ deprecated_add_show_from_set (add_set_enum_cmd ("saved-gpreg-size",
+ class_obscure,
+ size_enums,
+ &mips_abi_regsize_string, "\
Set size of general purpose registers saved on the stack.\n\
This option can be set to one of:\n\
32 - Force GDB to treat saved GP registers as 32-bit\n\
64 - Force GDB to treat saved GP registers as 64-bit\n\
auto - Allow GDB to use the target's default setting or autodetect the\n\
saved GP register size from information contained in the executable.\n\
- (default: auto)",
- &setmipscmdlist),
- &showmipscmdlist);
+ (default: auto)", &setmipscmdlist), &showmipscmdlist);
/* Allow the user to override the argument stack size. */
- add_show_from_set (add_set_enum_cmd ("stack-arg-size",
- class_obscure,
- size_enums,
- &mips_stack_argsize_string, "\
+ deprecated_add_show_from_set
+ (add_set_enum_cmd ("stack-arg-size",
+ class_obscure,
+ size_enums,
+ &mips_stack_argsize_string, "\
Set the amount of stack space reserved for each argument.\n\
This option can be set to one of:\n\
32 - Force GDB to allocate 32-bit chunks per argument\n\
64 - Force GDB to allocate 64-bit chunks per argument\n\
auto - Allow GDB to determine the correct setting from the current\n\
- target and executable (default)",
- &setmipscmdlist),
- &showmipscmdlist);
+ target and executable (default)", &setmipscmdlist),
+ &showmipscmdlist);
/* Allow the user to override the ABI. */
c = add_set_enum_cmd
"This option can be set to one of:\n"
" auto - the default ABI associated with the current binary\n"
" o32\n"
- " o64\n"
- " n32\n"
- " n64\n"
- " eabi32\n"
- " eabi64",
- &setmipscmdlist);
+ " o64\n" " n32\n" " n64\n" " eabi32\n" " eabi64", &setmipscmdlist);
set_cmd_sfunc (c, mips_abi_update);
add_cmd ("abi", class_obscure, show_mips_abi,
- "Show ABI in use by MIPS target", &showmipscmdlist);
+ "Show ABI in use by MIPS target", &showmipscmdlist);
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
add_cmd ("none", class_support, set_mipsfpu_none_command,
- "Select no MIPS floating-point coprocessor.",
- &mipsfpulist);
+ "Select no MIPS floating-point coprocessor.", &mipsfpulist);
add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
command.c doesn't deal with that. So make it a var_zinteger
because the user can always use "999999" or some such for unlimited. */
c = add_set_cmd ("heuristic-fence-post", class_support, var_zinteger,
- (char *) &heuristic_fence_post,
- "\
+ (char *) &heuristic_fence_post, "\
Set the distance searched for the start of a function.\n\
If you are debugging a stripped executable, GDB needs to search through the\n\
program for the start of a function. This command sets the distance of the\n\
-search. The only need to set it is when debugging a stripped executable.",
- &setlist);
+search. The only need to set it is when debugging a stripped executable.", &setlist);
/* We need to throw away the frame cache when we set this, since it
might change our ability to get backtraces. */
set_cmd_sfunc (c, reinit_frame_cache_sfunc);
- add_show_from_set (c, &showlist);
+ deprecated_add_show_from_set (c, &showlist);
/* Allow the user to control whether the upper bits of 64-bit
addresses should be zeroed. */
add_setshow_auto_boolean_cmd ("mask-address", no_class, &mask_address_var, "\
-Set zeroing of upper 32 bits of 64-bit addresses.\n\
+Set zeroing of upper 32 bits of 64-bit addresses.", "\
+Show zeroing of upper 32 bits of 64-bit addresses.", "\
Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\
allow GDB to determine the correct value.\n", "\
-Show zeroing of upper 32 bits of 64-bit addresses.",
- NULL, show_mask_address,
- &setmipscmdlist, &showmipscmdlist);
+Zerroing of upper 32 bits of 64-bit address is %s.",
+ NULL, show_mask_address, &setmipscmdlist, &showmipscmdlist);
/* Allow the user to control the size of 32 bit registers within the
raw remote packet. */
- add_setshow_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
- var_boolean, &mips64_transfers_32bit_regs_p, "\
-Set compatibility with 64-bit MIPS targets that transfer 32-bit quantities.\n\
-Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
-that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
-64 bits for others. Use \"off\" to disable compatibility mode", "\
-Show compatibility with 64-bit MIPS targets that transfer 32-bit quantities.\n\
+ add_setshow_boolean_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
+ &mips64_transfers_32bit_regs_p, "\
+Set compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
+Show compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
-64 bits for others. Use \"off\" to disable compatibility mode",
- set_mips64_transfers_32bit_regs, NULL,
- &setlist, &showlist);
+64 bits for others. Use \"off\" to disable compatibility mode", "\
+Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s.",
+ set_mips64_transfers_32bit_regs, NULL, &setlist, &showlist);
/* Debug this files internals. */
- add_show_from_set (add_set_cmd ("mips", class_maintenance, var_zinteger,
- &mips_debug, "Set mips debugging.\n\
+ deprecated_add_show_from_set
+ (add_set_cmd ("mips", class_maintenance, var_zinteger,
+ &mips_debug, "Set mips debugging.\n\
When non-zero, mips specific debugging is enabled.", &setdebuglist),
- &showdebuglist);
+ &showdebuglist);
}