#include "frame-base.h"
#include "trad-frame.h"
#include "infcall.h"
+#include "floatformat.h"
static const struct objfile_data *mips_pdr_data;
const char **mips_processor_reg_names;
};
+static int
+n32n64_floatformat_always_valid (const struct floatformat *fmt,
+ const char *from)
+{
+ return 1;
+}
+
+/* FIXME: brobecker/2004-08-08: Long Double values are 128 bit long.
+ They are implemented as a pair of 64bit doubles where the high
+ part holds the result of the operation rounded to double, and
+ the low double holds the difference between the exact result and
+ the rounded result. So "high" + "low" contains the result with
+ added precision. Unfortunately, the floatformat structure used
+ by GDB is not powerful enough to describe this format. As a temporary
+ measure, we define a 128bit floatformat that only uses the high part.
+ We lose a bit of precision but that's probably the best we can do
+ for now with the current infrastructure. */
+
+static const struct floatformat floatformat_n32n64_long_double_big =
+{
+ floatformat_big, 128, 0, 1, 11, 1023, 2047, 12, 52,
+ floatformat_intbit_no,
+ "floatformat_ieee_double_big",
+ n32n64_floatformat_always_valid
+};
+
const struct mips_regnum *
mips_regnum (struct gdbarch *gdbarch)
{
static mips_extra_func_info_t heuristic_proc_desc (CORE_ADDR, CORE_ADDR,
struct frame_info *, int);
+static mips_extra_func_info_t non_heuristic_proc_desc (CORE_ADDR pc,
+ CORE_ADDR *addrptr);
static CORE_ADDR heuristic_proc_start (CORE_ADDR);
static CORE_ADDR
mips_read_sp (void)
{
- return read_signed_register (SP_REGNUM);
+ return read_signed_register (MIPS_SP_REGNUM);
}
/* Should the upper word of 64-bit addresses be zeroed? */
return 0;
}
-/* MIPS believes that the PC has a sign extended value. Perhaphs the
+/* MIPS believes that the PC has a sign extended value. Perhaps the
all registers should be sign extended for simplicity? */
static CORE_ADDR
static struct frame_id
mips_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- return frame_id_build (frame_unwind_register_signed (next_frame, NUM_REGS + SP_REGNUM),
+ return frame_id_build (frame_unwind_register_signed (next_frame, NUM_REGS + MIPS_SP_REGNUM),
frame_pc_unwind (next_frame));
}
{
/* If function is frameless, then we need to do it the hard way. I
strongly suspect that frameless always means prologueless... */
- if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+ if (PROC_FRAME_REG (proc_desc) == MIPS_SP_REGNUM
&& PROC_FRAME_OFFSET (proc_desc) == 0)
return 0;
}
}
else
instlen = MIPS_INSTLEN;
- status = read_memory_nobpt (addr, buf, instlen);
+ status = deprecated_read_memory_nobpt (addr, buf, instlen);
if (status)
memory_error (status, addr);
return extract_unsigned_integer (buf, instlen);
instlen = MIPS16_INSTLEN;
addr = unmake_mips16_addr (addr);
- status = read_memory_nobpt (addr, buf, instlen);
+ status = deprecated_read_memory_nobpt (addr, buf, instlen);
if (status)
memory_error (status, addr);
return extract_unsigned_integer (buf, instlen);
int instlen;
int status;
instlen = MIPS_INSTLEN;
- status = read_memory_nobpt (addr, buf, instlen);
+ status = deprecated_read_memory_nobpt (addr, buf, instlen);
if (status)
memory_error (status, addr);
return extract_unsigned_integer (buf, instlen);
}
-static CORE_ADDR
-add_offset_16 (CORE_ADDR pc, int offset)
+static CORE_ADDR
+add_offset_16 (CORE_ADDR pc, int offset)
+{
+ return ((offset << 2) | ((pc + 2) & (0xf0000000)));
+}
+
+static CORE_ADDR
+extended_mips16_next_pc (CORE_ADDR pc,
+ unsigned int extension, unsigned int insn)
+{
+ int op = (insn >> 11);
+ switch (op)
+ {
+ case 2: /* Branch */
+ {
+ CORE_ADDR offset;
+ struct upk_mips16 upk;
+ unpack_mips16 (pc, extension, insn, itype, &upk);
+ offset = upk.offset;
+ if (offset & 0x800)
+ {
+ offset &= 0xeff;
+ offset = -offset;
+ }
+ pc += (offset << 1) + 2;
+ break;
+ }
+ case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
+ {
+ struct upk_mips16 upk;
+ unpack_mips16 (pc, extension, insn, jalxtype, &upk);
+ pc = add_offset_16 (pc, upk.offset);
+ if ((insn >> 10) & 0x01) /* Exchange mode */
+ pc = pc & ~0x01; /* Clear low bit, indicate 32 bit mode */
+ else
+ pc |= 0x01;
+ break;
+ }
+ case 4: /* beqz */
+ {
+ struct upk_mips16 upk;
+ int reg;
+ unpack_mips16 (pc, extension, insn, ritype, &upk);
+ reg = read_signed_register (upk.regx);
+ if (reg == 0)
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ }
+ case 5: /* bnez */
+ {
+ struct upk_mips16 upk;
+ int reg;
+ unpack_mips16 (pc, extension, insn, ritype, &upk);
+ reg = read_signed_register (upk.regx);
+ if (reg != 0)
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ }
+ case 12: /* I8 Formats btez btnez */
+ {
+ struct upk_mips16 upk;
+ int reg;
+ unpack_mips16 (pc, extension, insn, i8type, &upk);
+ /* upk.regx contains the opcode */
+ reg = read_signed_register (24); /* Test register is 24 */
+ if (((upk.regx == 0) && (reg == 0)) /* BTEZ */
+ || ((upk.regx == 1) && (reg != 0))) /* BTNEZ */
+ /* pc = add_offset_16(pc,upk.offset) ; */
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ }
+ case 29: /* RR Formats JR, JALR, JALR-RA */
+ {
+ struct upk_mips16 upk;
+ /* upk.fmt = rrtype; */
+ op = insn & 0x1f;
+ if (op == 0)
+ {
+ int reg;
+ upk.regx = (insn >> 8) & 0x07;
+ upk.regy = (insn >> 5) & 0x07;
+ switch (upk.regy)
+ {
+ case 0:
+ reg = upk.regx;
+ break;
+ case 1:
+ reg = 31;
+ break; /* Function return instruction */
+ case 2:
+ reg = upk.regx;
+ break;
+ default:
+ reg = 31;
+ break; /* BOGUS Guess */
+ }
+ pc = read_signed_register (reg);
+ }
+ else
+ pc += 2;
+ break;
+ }
+ case 30:
+ /* This is an instruction extension. Fetch the real instruction
+ (which follows the extension) and decode things based on
+ that. */
+ {
+ pc += 2;
+ pc = extended_mips16_next_pc (pc, insn, fetch_mips_16 (pc));
+ break;
+ }
+ default:
+ {
+ pc += 2;
+ break;
+ }
+ }
+ return pc;
+}
+
+static CORE_ADDR
+mips16_next_pc (CORE_ADDR pc)
+{
+ unsigned int insn = fetch_mips_16 (pc);
+ return extended_mips16_next_pc (pc, 0, insn);
+}
+
+/* The mips_next_pc function supports single_step when the remote
+ target monitor or stub is not developed enough to do a single_step.
+ It works by decoding the current instruction and predicting where a
+ branch will go. This isnt hard because all the data is available.
+ The MIPS32 and MIPS16 variants are quite different */
+CORE_ADDR
+mips_next_pc (CORE_ADDR pc)
+{
+ if (pc & 0x01)
+ return mips16_next_pc (pc);
+ else
+ return mips32_next_pc (pc);
+}
+
+struct mips_frame_cache
+{
+ CORE_ADDR base;
+ struct trad_frame_saved_reg *saved_regs;
+};
+
+
+static struct mips_frame_cache *
+mips_mdebug_frame_cache (struct frame_info *next_frame, void **this_cache)
+{
+ mips_extra_func_info_t proc_desc;
+ struct mips_frame_cache *cache;
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ /* r0 bit means kernel trap */
+ int kernel_trap;
+ /* What registers have been saved? Bitmasks. */
+ unsigned long gen_mask, float_mask;
+
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+
+ /* Get the mdebug proc descriptor. */
+ proc_desc = find_proc_desc (frame_pc_unwind (next_frame), next_frame, 1);
+ if (proc_desc == NULL)
+ /* I'm not sure how/whether this can happen. Normally when we
+ can't find a proc_desc, we "synthesize" one using
+ heuristic_proc_desc and set the saved_regs right away. */
+ return cache;
+
+ /* Extract the frame's base. */
+ cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
+ + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
+
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
+ float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
+
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc))
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we
+ better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
+ {
+ /* We need to figure out whether the registers that the
+ proc_desc claims are saved have been saved yet. */
+
+ CORE_ADDR addr;
+
+ /* Bitmasks; set if we have found a save for the register. */
+ unsigned long gen_save_found = 0;
+ unsigned long float_save_found = 0;
+ int mips16;
+
+ /* If the address is odd, assume this is MIPS16 code. */
+ addr = PROC_LOW_ADDR (proc_desc);
+ mips16 = pc_is_mips16 (addr);
+
+ /* Scan through this function's instructions preceding the
+ current PC, and look for those that save registers. */
+ while (addr < frame_pc_unwind (next_frame))
+ {
+ if (mips16)
+ {
+ mips16_decode_reg_save (mips16_fetch_instruction (addr),
+ &gen_save_found);
+ addr += MIPS16_INSTLEN;
+ }
+ else
+ {
+ mips32_decode_reg_save (mips32_fetch_instruction (addr),
+ &gen_save_found, &float_save_found);
+ addr += MIPS_INSTLEN;
+ }
+ }
+ gen_mask = gen_save_found;
+ float_mask = float_save_found;
+ }
+
+ /* Fill in the offsets for the registers which gen_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ int ireg;
+ for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
+ if (gen_mask & 0x80000000)
+ {
+ cache->saved_regs[NUM_REGS + ireg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
+ }
+
+ /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse
+ order of that normally used by gcc. Therefore, we have to fetch
+ the first instruction of the function, and if it's an entry
+ instruction that saves $s0 or $s1, correct their saved addresses. */
+ if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
+ {
+ ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
+ /* entry */
+ {
+ int reg;
+ int sreg_count = (inst >> 6) & 3;
+
+ /* Check if the ra register was pushed on the stack. */
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ if (inst & 0x20)
+ reg_position -= mips_abi_regsize (gdbarch);
+
+ /* Check if the s0 and s1 registers were pushed on the
+ stack. */
+ /* NOTE: cagney/2004-02-08: Huh? This is doing no such
+ check. */
+ for (reg = 16; reg < sreg_count + 16; reg++)
+ {
+ cache->saved_regs[NUM_REGS + reg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
+ }
+ }
+
+ /* Fill in the offsets for the registers which float_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_FREG_OFFSET (proc_desc));
+ int ireg;
+ /* Fill in the offsets for the float registers which float_mask
+ says were saved. */
+ for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
+ if (float_mask & 0x80000000)
+ {
+ if (mips_abi_regsize (gdbarch) == 4
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ /* On a big endian 32 bit ABI, floating point registers
+ are paired to form doubles such that the most
+ significant part is in $f[N+1] and the least
+ significant in $f[N] vis: $f[N+1] ||| $f[N]. The
+ registers are also spilled as a pair and stored as a
+ double.
+
+ When little-endian the least significant part is
+ stored first leading to the memory order $f[N] and
+ then $f[N+1].
+
+ Unfortunately, when big-endian the most significant
+ part of the double is stored first, and the least
+ significant is stored second. This leads to the
+ registers being ordered in memory as firt $f[N+1] and
+ then $f[N].
+
+ For the big-endian case make certain that the
+ addresses point at the correct (swapped) locations
+ $f[N] and $f[N+1] pair (keep in mind that
+ reg_position is decremented each time through the
+ loop). */
+ if ((ireg & 1))
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position - mips_abi_regsize (gdbarch);
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position + mips_abi_regsize (gdbarch);
+ }
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
+
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc]
+ = cache->saved_regs[NUM_REGS + RA_REGNUM];
+ }
+
+ /* SP_REGNUM, contains the value and not the address. */
+ trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
+
+ return (*this_cache);
+}
+
+static void
+mips_mdebug_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ this_cache);
+ (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
+}
+
+static void
+mips_mdebug_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ this_cache);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
+
+static const struct frame_unwind mips_mdebug_frame_unwind =
+{
+ NORMAL_FRAME,
+ mips_mdebug_frame_this_id,
+ mips_mdebug_frame_prev_register
+};
+
+static const struct frame_unwind *
+mips_mdebug_frame_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ CORE_ADDR startaddr = 0;
+ mips_extra_func_info_t proc_desc;
+ int kernel_trap;
+
+ /* Only use the mdebug frame unwinder on mdebug frames where all the
+ registers have been saved. Leave hard cases such as no mdebug or
+ in prologue for the heuristic unwinders. */
+
+ proc_desc = non_heuristic_proc_desc (pc, &startaddr);
+ if (proc_desc == NULL)
+ return NULL;
+
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we better
+ not examine the prologue to see whether registers have been saved
+ yet. */
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ if (kernel_trap)
+ return &mips_mdebug_frame_unwind;
+
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (!in_prologue (pc, PROC_LOW_ADDR (proc_desc)))
+ return &mips_mdebug_frame_unwind;
+
+ return NULL;
+}
+
+static CORE_ADDR
+mips_mdebug_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
+{
+ struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ this_cache);
+ return info->base;
+}
+
+static const struct frame_base mips_mdebug_frame_base = {
+ &mips_mdebug_frame_unwind,
+ mips_mdebug_frame_base_address,
+ mips_mdebug_frame_base_address,
+ mips_mdebug_frame_base_address
+};
+
+static const struct frame_base *
+mips_mdebug_frame_base_sniffer (struct frame_info *next_frame)
+{
+ if (mips_mdebug_frame_sniffer (next_frame) != NULL)
+ return &mips_mdebug_frame_base;
+ else
+ return NULL;
+}
+
+/* Heuristic unwinder for 16-bit MIPS instruction set (aka MIPS16).
+ Procedures that use the 32-bit instruction set are handled by the
+ mips_insn32 unwinder. */
+
+static struct mips_frame_cache *
+mips_insn16_frame_cache (struct frame_info *next_frame, void **this_cache)
+{
+ mips_extra_func_info_t proc_desc;
+ struct mips_frame_cache *cache;
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ /* r0 bit means kernel trap */
+ int kernel_trap;
+ /* What registers have been saved? Bitmasks. */
+ unsigned long gen_mask, float_mask;
+
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache);
+ (*this_cache) = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+
+ /* Get the mdebug proc descriptor. */
+ proc_desc = find_proc_desc (frame_pc_unwind (next_frame), next_frame, 1);
+ if (proc_desc == NULL)
+ /* I'm not sure how/whether this can happen. Normally when we
+ can't find a proc_desc, we "synthesize" one using
+ heuristic_proc_desc and set the saved_regs right away. */
+ return cache;
+
+ /* Extract the frame's base. */
+ cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc))
+ + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
+
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
+ float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
+
+ /* In any frame other than the innermost or a frame interrupted by a
+ signal, we assume that all registers have been saved. This
+ assumes that all register saves in a function happen before the
+ first function call. */
+ if (in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc))
+ /* Not sure exactly what kernel_trap means, but if it means the
+ kernel saves the registers without a prologue doing it, we
+ better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
+ {
+ /* We need to figure out whether the registers that the
+ proc_desc claims are saved have been saved yet. */
+
+ CORE_ADDR addr;
+
+ /* Bitmasks; set if we have found a save for the register. */
+ unsigned long gen_save_found = 0;
+ unsigned long float_save_found = 0;
+ int mips16;
+
+ /* If the address is odd, assume this is MIPS16 code. */
+ addr = PROC_LOW_ADDR (proc_desc);
+ mips16 = pc_is_mips16 (addr);
+
+ /* Scan through this function's instructions preceding the
+ current PC, and look for those that save registers. */
+ while (addr < frame_pc_unwind (next_frame))
+ {
+ if (mips16)
+ {
+ mips16_decode_reg_save (mips16_fetch_instruction (addr),
+ &gen_save_found);
+ addr += MIPS16_INSTLEN;
+ }
+ else
+ {
+ mips32_decode_reg_save (mips32_fetch_instruction (addr),
+ &gen_save_found, &float_save_found);
+ addr += MIPS_INSTLEN;
+ }
+ }
+ gen_mask = gen_save_found;
+ float_mask = float_save_found;
+ }
+
+ /* Fill in the offsets for the registers which gen_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ int ireg;
+ for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
+ if (gen_mask & 0x80000000)
+ {
+ cache->saved_regs[NUM_REGS + ireg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
+ }
+
+ /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse
+ order of that normally used by gcc. Therefore, we have to fetch
+ the first instruction of the function, and if it's an entry
+ instruction that saves $s0 or $s1, correct their saved addresses. */
+ if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
+ {
+ ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700)
+ /* entry */
+ {
+ int reg;
+ int sreg_count = (inst >> 6) & 3;
+
+ /* Check if the ra register was pushed on the stack. */
+ CORE_ADDR reg_position = (cache->base
+ + PROC_REG_OFFSET (proc_desc));
+ if (inst & 0x20)
+ reg_position -= mips_abi_regsize (gdbarch);
+
+ /* Check if the s0 and s1 registers were pushed on the
+ stack. */
+ /* NOTE: cagney/2004-02-08: Huh? This is doing no such
+ check. */
+ for (reg = 16; reg < sreg_count + 16; reg++)
+ {
+ cache->saved_regs[NUM_REGS + reg].addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
+ }
+ }
+
+ /* Fill in the offsets for the registers which float_mask says were
+ saved. */
+ {
+ CORE_ADDR reg_position = (cache->base
+ + PROC_FREG_OFFSET (proc_desc));
+ int ireg;
+ /* Fill in the offsets for the float registers which float_mask
+ says were saved. */
+ for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
+ if (float_mask & 0x80000000)
+ {
+ if (mips_abi_regsize (gdbarch) == 4
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ /* On a big endian 32 bit ABI, floating point registers
+ are paired to form doubles such that the most
+ significant part is in $f[N+1] and the least
+ significant in $f[N] vis: $f[N+1] ||| $f[N]. The
+ registers are also spilled as a pair and stored as a
+ double.
+
+ When little-endian the least significant part is
+ stored first leading to the memory order $f[N] and
+ then $f[N+1].
+
+ Unfortunately, when big-endian the most significant
+ part of the double is stored first, and the least
+ significant is stored second. This leads to the
+ registers being ordered in memory as firt $f[N+1] and
+ then $f[N].
+
+ For the big-endian case make certain that the
+ addresses point at the correct (swapped) locations
+ $f[N] and $f[N+1] pair (keep in mind that
+ reg_position is decremented each time through the
+ loop). */
+ if ((ireg & 1))
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position - mips_abi_regsize (gdbarch);
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position + mips_abi_regsize (gdbarch);
+ }
+ else
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg]
+ .addr = reg_position;
+ reg_position -= mips_abi_regsize (gdbarch);
+ }
+
+ cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc]
+ = cache->saved_regs[NUM_REGS + RA_REGNUM];
+ }
+
+ /* SP_REGNUM, contains the value and not the address. */
+ trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
+
+ return (*this_cache);
+}
+
+static void
+mips_insn16_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
{
- return ((offset << 2) | ((pc + 2) & (0xf0000000)));
+ struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
+ this_cache);
+ (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
}
-static CORE_ADDR
-extended_mips16_next_pc (CORE_ADDR pc,
- unsigned int extension, unsigned int insn)
+static void
+mips_insn16_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
{
- int op = (insn >> 11);
- switch (op)
- {
- case 2: /* Branch */
- {
- CORE_ADDR offset;
- struct upk_mips16 upk;
- unpack_mips16 (pc, extension, insn, itype, &upk);
- offset = upk.offset;
- if (offset & 0x800)
- {
- offset &= 0xeff;
- offset = -offset;
- }
- pc += (offset << 1) + 2;
- break;
- }
- case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
- {
- struct upk_mips16 upk;
- unpack_mips16 (pc, extension, insn, jalxtype, &upk);
- pc = add_offset_16 (pc, upk.offset);
- if ((insn >> 10) & 0x01) /* Exchange mode */
- pc = pc & ~0x01; /* Clear low bit, indicate 32 bit mode */
- else
- pc |= 0x01;
- break;
- }
- case 4: /* beqz */
- {
- struct upk_mips16 upk;
- int reg;
- unpack_mips16 (pc, extension, insn, ritype, &upk);
- reg = read_signed_register (upk.regx);
- if (reg == 0)
- pc += (upk.offset << 1) + 2;
- else
- pc += 2;
- break;
- }
- case 5: /* bnez */
- {
- struct upk_mips16 upk;
- int reg;
- unpack_mips16 (pc, extension, insn, ritype, &upk);
- reg = read_signed_register (upk.regx);
- if (reg != 0)
- pc += (upk.offset << 1) + 2;
- else
- pc += 2;
- break;
- }
- case 12: /* I8 Formats btez btnez */
- {
- struct upk_mips16 upk;
- int reg;
- unpack_mips16 (pc, extension, insn, i8type, &upk);
- /* upk.regx contains the opcode */
- reg = read_signed_register (24); /* Test register is 24 */
- if (((upk.regx == 0) && (reg == 0)) /* BTEZ */
- || ((upk.regx == 1) && (reg != 0))) /* BTNEZ */
- /* pc = add_offset_16(pc,upk.offset) ; */
- pc += (upk.offset << 1) + 2;
- else
- pc += 2;
- break;
- }
- case 29: /* RR Formats JR, JALR, JALR-RA */
- {
- struct upk_mips16 upk;
- /* upk.fmt = rrtype; */
- op = insn & 0x1f;
- if (op == 0)
- {
- int reg;
- upk.regx = (insn >> 8) & 0x07;
- upk.regy = (insn >> 5) & 0x07;
- switch (upk.regy)
- {
- case 0:
- reg = upk.regx;
- break;
- case 1:
- reg = 31;
- break; /* Function return instruction */
- case 2:
- reg = upk.regx;
- break;
- default:
- reg = 31;
- break; /* BOGUS Guess */
- }
- pc = read_signed_register (reg);
- }
- else
- pc += 2;
- break;
- }
- case 30:
- /* This is an instruction extension. Fetch the real instruction
- (which follows the extension) and decode things based on
- that. */
- {
- pc += 2;
- pc = extended_mips16_next_pc (pc, insn, fetch_mips_16 (pc));
- break;
- }
- default:
- {
- pc += 2;
- break;
- }
- }
- return pc;
+ struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
+ this_cache);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
}
-static CORE_ADDR
-mips16_next_pc (CORE_ADDR pc)
+static const struct frame_unwind mips_insn16_frame_unwind =
{
- unsigned int insn = fetch_mips_16 (pc);
- return extended_mips16_next_pc (pc, 0, insn);
+ NORMAL_FRAME,
+ mips_insn16_frame_this_id,
+ mips_insn16_frame_prev_register
+};
+
+static const struct frame_unwind *
+mips_insn16_frame_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ if (pc_is_mips16 (pc))
+ return &mips_insn16_frame_unwind;
+ return NULL;
}
-/* The mips_next_pc function supports single_step when the remote
- target monitor or stub is not developed enough to do a single_step.
- It works by decoding the current instruction and predicting where a
- branch will go. This isnt hard because all the data is available.
- The MIPS32 and MIPS16 variants are quite different */
-CORE_ADDR
-mips_next_pc (CORE_ADDR pc)
+static CORE_ADDR
+mips_insn16_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
{
- if (pc & 0x01)
- return mips16_next_pc (pc);
- else
- return mips32_next_pc (pc);
+ struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame,
+ this_cache);
+ return info->base;
}
-struct mips_frame_cache
+static const struct frame_base mips_insn16_frame_base =
{
- CORE_ADDR base;
- struct trad_frame_saved_reg *saved_regs;
+ &mips_insn16_frame_unwind,
+ mips_insn16_frame_base_address,
+ mips_insn16_frame_base_address,
+ mips_insn16_frame_base_address
};
+static const struct frame_base *
+mips_insn16_frame_base_sniffer (struct frame_info *next_frame)
+{
+ if (mips_insn16_frame_sniffer (next_frame) != NULL)
+ return &mips_insn16_frame_base;
+ else
+ return NULL;
+}
+
+/* Heuristic unwinder for procedures using 32-bit instructions (covers
+ both 32-bit and 64-bit MIPS ISAs). Procedures using 16-bit
+ instructions (a.k.a. MIPS16) are handled by the mips_insn16
+ unwinder. */
static struct mips_frame_cache *
-mips_mdebug_frame_cache (struct frame_info *next_frame, void **this_cache)
+mips_insn32_frame_cache (struct frame_info *next_frame, void **this_cache)
{
mips_extra_func_info_t proc_desc;
struct mips_frame_cache *cache;
}
/* SP_REGNUM, contains the value and not the address. */
- trad_frame_set_value (cache->saved_regs, NUM_REGS + SP_REGNUM, cache->base);
+ trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base);
return (*this_cache);
}
static void
-mips_mdebug_frame_this_id (struct frame_info *next_frame, void **this_cache,
+mips_insn32_frame_this_id (struct frame_info *next_frame, void **this_cache,
struct frame_id *this_id)
{
- struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
this_cache);
(*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame));
}
static void
-mips_mdebug_frame_prev_register (struct frame_info *next_frame,
+mips_insn32_frame_prev_register (struct frame_info *next_frame,
void **this_cache,
int regnum, int *optimizedp,
enum lval_type *lvalp, CORE_ADDR *addrp,
int *realnump, void *valuep)
{
- struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
this_cache);
- trad_frame_prev_register (next_frame, info->saved_regs, regnum,
- optimizedp, lvalp, addrp, realnump, valuep);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
}
-static const struct frame_unwind mips_mdebug_frame_unwind =
+static const struct frame_unwind mips_insn32_frame_unwind =
{
NORMAL_FRAME,
- mips_mdebug_frame_this_id,
- mips_mdebug_frame_prev_register
+ mips_insn32_frame_this_id,
+ mips_insn32_frame_prev_register
};
static const struct frame_unwind *
-mips_mdebug_frame_sniffer (struct frame_info *next_frame)
+mips_insn32_frame_sniffer (struct frame_info *next_frame)
{
- return &mips_mdebug_frame_unwind;
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ if (! pc_is_mips16 (pc))
+ return &mips_insn32_frame_unwind;
+ return NULL;
}
static CORE_ADDR
-mips_mdebug_frame_base_address (struct frame_info *next_frame,
+mips_insn32_frame_base_address (struct frame_info *next_frame,
void **this_cache)
{
- struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame,
+ struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame,
this_cache);
return info->base;
}
-static const struct frame_base mips_mdebug_frame_base = {
- &mips_mdebug_frame_unwind,
- mips_mdebug_frame_base_address,
- mips_mdebug_frame_base_address,
- mips_mdebug_frame_base_address
+static const struct frame_base mips_insn32_frame_base =
+{
+ &mips_insn32_frame_unwind,
+ mips_insn32_frame_base_address,
+ mips_insn32_frame_base_address,
+ mips_insn32_frame_base_address
};
static const struct frame_base *
-mips_mdebug_frame_base_sniffer (struct frame_info *next_frame)
+mips_insn32_frame_base_sniffer (struct frame_info *next_frame)
+{
+ if (mips_insn32_frame_sniffer (next_frame) != NULL)
+ return &mips_insn32_frame_base;
+ else
+ return NULL;
+}
+
+static struct trad_frame_cache *
+mips_stub_frame_cache (struct frame_info *next_frame, void **this_cache)
+{
+ CORE_ADDR pc;
+ CORE_ADDR start_addr;
+ CORE_ADDR stack_addr;
+ struct trad_frame_cache *this_trad_cache;
+
+ if ((*this_cache) != NULL)
+ return (*this_cache);
+ this_trad_cache = trad_frame_cache_zalloc (next_frame);
+ (*this_cache) = this_trad_cache;
+
+ /* The return address is in the link register. */
+ trad_frame_set_reg_realreg (this_trad_cache, PC_REGNUM, RA_REGNUM);
+
+ /* Frame ID, since it's a frameless / stackless function, no stack
+ space is allocated and SP on entry is the current SP. */
+ pc = frame_pc_unwind (next_frame);
+ find_pc_partial_function (pc, NULL, &start_addr, NULL);
+ stack_addr = frame_unwind_register_signed (next_frame, SP_REGNUM);
+ trad_frame_set_id (this_trad_cache, frame_id_build (start_addr, stack_addr));
+
+ /* Assume that the frame's base is the same as the
+ stack-pointer. */
+ trad_frame_set_this_base (this_trad_cache, stack_addr);
+
+ return this_trad_cache;
+}
+
+static void
+mips_stub_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (next_frame, this_cache);
+ trad_frame_get_id (this_trad_cache, this_id);
+}
+
+static void
+mips_stub_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (next_frame, this_cache);
+ trad_frame_get_register (this_trad_cache, next_frame, regnum, optimizedp,
+ lvalp, addrp, realnump, valuep);
+}
+
+static const struct frame_unwind mips_stub_frame_unwind =
+{
+ NORMAL_FRAME,
+ mips_stub_frame_this_id,
+ mips_stub_frame_prev_register
+};
+
+static const struct frame_unwind *
+mips_stub_frame_sniffer (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ if (in_plt_section (pc, NULL))
+ return &mips_stub_frame_unwind;
+ else
+ return NULL;
+}
+
+static CORE_ADDR
+mips_stub_frame_base_address (struct frame_info *next_frame,
+ void **this_cache)
+{
+ struct trad_frame_cache *this_trad_cache
+ = mips_stub_frame_cache (next_frame, this_cache);
+ return trad_frame_get_this_base (this_trad_cache);
+}
+
+static const struct frame_base mips_stub_frame_base =
{
- return &mips_mdebug_frame_base;
+ &mips_stub_frame_unwind,
+ mips_stub_frame_base_address,
+ mips_stub_frame_base_address,
+ mips_stub_frame_base_address
+};
+
+static const struct frame_base *
+mips_stub_frame_base_sniffer (struct frame_info *next_frame)
+{
+ if (mips_stub_frame_sniffer (next_frame) != NULL)
+ return &mips_stub_frame_base;
+ else
+ return NULL;
}
static CORE_ADDR
regcache_cooked_read_signed (current_regcache, regno, &val);
return val;
}
- else if ((regno % NUM_REGS) == SP_REGNUM)
- /* The SP_REGNUM is special, its value is stored in saved_regs.
+ else if ((regno % NUM_REGS) == MIPS_SP_REGNUM)
+ /* MIPS_SP_REGNUM is special, its value is stored in saved_regs.
In fact, it is so special that it can even only be fetched
using a raw register number! Once this code as been converted
to frame-unwind the problem goes away. */
/* Old gcc frame, r30 is virtual frame pointer. */
if ((long) low_word != PROC_FRAME_OFFSET (&temp_proc_desc))
frame_addr = sp + low_word;
- else if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
+ else if (PROC_FRAME_REG (&temp_proc_desc) == MIPS_SP_REGNUM)
{
unsigned alloca_adjust;
PROC_FRAME_REG (&temp_proc_desc) = 30;
else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
{
/* New gcc frame, virtual frame pointer is at r30 + frame_size. */
- if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
+ if (PROC_FRAME_REG (&temp_proc_desc) == MIPS_SP_REGNUM)
{
unsigned alloca_adjust;
PROC_FRAME_REG (&temp_proc_desc) = 30;
CORE_ADDR sp;
if (cur_frame)
- sp = read_next_frame_reg (next_frame, NUM_REGS + SP_REGNUM);
+ sp = read_next_frame_reg (next_frame, NUM_REGS + MIPS_SP_REGNUM);
else
sp = 0;
temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
- PROC_FRAME_REG (&temp_proc_desc) = SP_REGNUM;
+ PROC_FRAME_REG (&temp_proc_desc) = MIPS_SP_REGNUM;
PROC_PC_REG (&temp_proc_desc) = RA_REGNUM;
if (start_pc + 200 < limit_pc)
fprintf_unfiltered (gdb_stdlog, "\n");
}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
/* Return adjusted stack pointer. */
return sp;
fprintf_unfiltered (gdb_stdlog, "\n");
}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
/* Return adjusted stack pointer. */
return sp;
fprintf_unfiltered (gdb_stdlog, "\n");
}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
/* Return adjusted stack pointer. */
return sp;
fprintf_unfiltered (gdb_stdlog, "\n");
}
- regcache_cooked_write_signed (regcache, SP_REGNUM, sp);
+ regcache_cooked_write_signed (regcache, MIPS_SP_REGNUM, sp);
/* Return adjusted stack pointer. */
return sp;
}
-/* Return non-zero if the PC is in a library helper function that should
- be ignored. This implements the IGNORE_HELPER_CALL macro. */
+/* Return non-zero if the PC is in a library helper function that
+ should be ignored. This implements the
+ DEPRECATED_IGNORE_HELPER_CALL macro. */
int
mips_ignore_helper (CORE_ADDR pc)
}
/* FIXME: cagney/2003-11-15: For MIPS, hasn't PC_REGNUM been
replaced by read_pc? */
- set_gdbarch_pc_regnum (gdbarch, regnum->pc);
+ set_gdbarch_pc_regnum (gdbarch, regnum->pc + num_regs);
+ set_gdbarch_sp_regnum (gdbarch, MIPS_SP_REGNUM + num_regs);
set_gdbarch_fp0_regnum (gdbarch, regnum->fp0);
set_gdbarch_num_regs (gdbarch, num_regs);
set_gdbarch_num_pseudo_regs (gdbarch, num_regs);
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
+ set_gdbarch_long_double_bit (gdbarch, 128);
+ set_gdbarch_long_double_format (gdbarch,
+ &floatformat_n32n64_long_double_big);
break;
case MIPS_ABI_N64:
set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call);
set_gdbarch_long_bit (gdbarch, 64);
set_gdbarch_ptr_bit (gdbarch, 64);
set_gdbarch_long_long_bit (gdbarch, 64);
+ set_gdbarch_long_double_bit (gdbarch, 128);
+ set_gdbarch_long_double_format (gdbarch,
+ &floatformat_n32n64_long_double_big);
break;
default:
internal_error (__FILE__, __LINE__, "unknown ABI in switch");
gdbarch_init_osabi (info, gdbarch);
/* Unwind the frame. */
+ frame_unwind_append_sniffer (gdbarch, mips_stub_frame_sniffer);
frame_unwind_append_sniffer (gdbarch, mips_mdebug_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, mips_insn16_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, mips_insn32_frame_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_stub_frame_base_sniffer);
frame_base_append_sniffer (gdbarch, mips_mdebug_frame_base_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_insn16_frame_base_sniffer);
+ frame_base_append_sniffer (gdbarch, mips_insn32_frame_base_sniffer);
return gdbarch;
}
"mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n",
FIRST_EMBED_REGNUM);
fprintf_unfiltered (file,
- "mips_dump_tdep: IGNORE_HELPER_CALL # %s\n",
- XSTRING (IGNORE_HELPER_CALL (PC)));
+ "mips_dump_tdep: DEPRECATED_IGNORE_HELPER_CALL # %s\n",
+ XSTRING (DEPRECATED_IGNORE_HELPER_CALL (PC)));
fprintf_unfiltered (file,
"mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n",
XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME)));
&showmipscmdlist, "show mips ", 0, &showlist);
/* Allow the user to override the saved register size. */
- add_show_from_set (add_set_enum_cmd ("saved-gpreg-size",
- class_obscure,
- size_enums,
- &mips_abi_regsize_string, "\
+ deprecated_add_show_from_set (add_set_enum_cmd ("saved-gpreg-size",
+ class_obscure,
+ size_enums,
+ &mips_abi_regsize_string, "\
Set size of general purpose registers saved on the stack.\n\
This option can be set to one of:\n\
32 - Force GDB to treat saved GP registers as 32-bit\n\
(default: auto)", &setmipscmdlist), &showmipscmdlist);
/* Allow the user to override the argument stack size. */
- add_show_from_set (add_set_enum_cmd ("stack-arg-size",
- class_obscure,
- size_enums,
- &mips_stack_argsize_string, "\
+ deprecated_add_show_from_set
+ (add_set_enum_cmd ("stack-arg-size",
+ class_obscure,
+ size_enums,
+ &mips_stack_argsize_string, "\
Set the amount of stack space reserved for each argument.\n\
This option can be set to one of:\n\
32 - Force GDB to allocate 32-bit chunks per argument\n\
64 - Force GDB to allocate 64-bit chunks per argument\n\
auto - Allow GDB to determine the correct setting from the current\n\
- target and executable (default)", &setmipscmdlist), &showmipscmdlist);
+ target and executable (default)", &setmipscmdlist),
+ &showmipscmdlist);
/* Allow the user to override the ABI. */
c = add_set_enum_cmd
/* We need to throw away the frame cache when we set this, since it
might change our ability to get backtraces. */
set_cmd_sfunc (c, reinit_frame_cache_sfunc);
- add_show_from_set (c, &showlist);
+ deprecated_add_show_from_set (c, &showlist);
/* Allow the user to control whether the upper bits of 64-bit
addresses should be zeroed. */
add_setshow_auto_boolean_cmd ("mask-address", no_class, &mask_address_var, "\
-Set zeroing of upper 32 bits of 64-bit addresses.\n\
+Set zeroing of upper 32 bits of 64-bit addresses.", "\
+Show zeroing of upper 32 bits of 64-bit addresses.", "\
Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\
allow GDB to determine the correct value.\n", "\
-Show zeroing of upper 32 bits of 64-bit addresses.",
+Zerroing of upper 32 bits of 64-bit address is %s.",
NULL, show_mask_address, &setmipscmdlist, &showmipscmdlist);
/* Allow the user to control the size of 32 bit registers within the
raw remote packet. */
- add_setshow_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
- var_boolean, &mips64_transfers_32bit_regs_p, "\
-Set compatibility with 64-bit MIPS targets that transfer 32-bit quantities.\n\
+ add_setshow_boolean_cmd ("remote-mips64-transfers-32bit-regs", class_obscure,
+ &mips64_transfers_32bit_regs_p, "\
+Set compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
+Show compatibility with 64-bit MIPS target that transfers 32-bit quantities.", "\
Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
64 bits for others. Use \"off\" to disable compatibility mode", "\
-Show compatibility with 64-bit MIPS targets that transfer 32-bit quantities.\n\
-Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
-that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
-64 bits for others. Use \"off\" to disable compatibility mode", set_mips64_transfers_32bit_regs, NULL, &setlist, &showlist);
+Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s.",
+ set_mips64_transfers_32bit_regs, NULL, &setlist, &showlist);
/* Debug this files internals. */
- add_show_from_set (add_set_cmd ("mips", class_maintenance, var_zinteger,
- &mips_debug, "Set mips debugging.\n\
-When non-zero, mips specific debugging is enabled.", &setdebuglist), &showdebuglist);
+ deprecated_add_show_from_set
+ (add_set_cmd ("mips", class_maintenance, var_zinteger,
+ &mips_debug, "Set mips debugging.\n\
+When non-zero, mips specific debugging is enabled.", &setdebuglist),
+ &showdebuglist);
}