/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
- Free Software Foundation, Inc.
+
+ Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
+ 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "gdb_string.h"
#include "objfiles.h"
#include "gdbtypes.h"
#include "target.h"
+#include "arch-utils.h"
+#include "regcache.h"
#include "opcode/mips.h"
-/* start-sanitize-carp start-sanitize-vr4xxx */
#include "elf/mips.h"
#include "elf-bfd.h"
+#include "symcat.h"
-/* end-sanitize-carp end-sanitize-vr4xxx */
+/* The sizes of floating point registers. */
-/* Some MIPS boards don't support floating point, so we permit the
- user to turn it off. */
-
-enum mips_fpu_type
+enum
{
- MIPS_FPU_DOUBLE, /* Full double precision floating point. */
- MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
- MIPS_FPU_NONE /* No floating point. */
+ MIPS_FPU_SINGLE_REGSIZE = 4,
+ MIPS_FPU_DOUBLE_REGSIZE = 8
+};
+
+/* All the possible MIPS ABIs. */
+
+enum mips_abi
+ {
+ MIPS_ABI_UNKNOWN,
+ MIPS_ABI_N32,
+ MIPS_ABI_O32,
+ MIPS_ABI_O64,
+ MIPS_ABI_EABI32,
+ MIPS_ABI_EABI64
+ };
+
+struct frame_extra_info
+ {
+ mips_extra_func_info_t proc_desc;
+ int num_args;
+ };
+
+/* Various MIPS ISA options (related to stack analysis) can be
+ overridden dynamically. Establish an enum/array for managing
+ them. */
+
+static const char size_auto[] = "auto";
+static const char size_32[] = "32";
+static const char size_64[] = "64";
+
+static const char *size_enums[] = {
+ size_auto,
+ size_32,
+ size_64,
+ 0
};
+/* Some MIPS boards don't support floating point while others only
+ support single-precision floating-point operations. See also
+ FP_REGISTER_DOUBLE. */
+
+enum mips_fpu_type
+ {
+ MIPS_FPU_DOUBLE, /* Full double precision floating point. */
+ MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
+ MIPS_FPU_NONE /* No floating point. */
+ };
+
+#ifndef MIPS_DEFAULT_FPU_TYPE
+#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_DOUBLE
+#endif
static int mips_fpu_type_auto = 1;
-#ifdef MIPS_DEFAULT_FPU_TYPE
static enum mips_fpu_type mips_fpu_type = MIPS_DEFAULT_FPU_TYPE;
-#else
-static enum mips_fpu_type mips_fpu = MIPS_FPU_DOUBLE;
-#endif
#define MIPS_FPU_TYPE mips_fpu_type
-/* start-sanitize-carp start-sanitize-vr4xxx */
+/* Do not use "TARGET_IS_MIPS64" to test the size of floating point registers */
+#ifndef FP_REGISTER_DOUBLE
+#define FP_REGISTER_DOUBLE (REGISTER_VIRTUAL_SIZE(FP0_REGNUM) == 8)
+#endif
+
+static int mips_debug = 0;
/* MIPS specific per-architecture information */
struct gdbarch_tdep
-{
- int elf_abi;
- /* mips options */
- int mips_eabi;
- enum mips_fpu_type mips_fpu_type;
- int mips_last_arg_regnum;
- int mips_last_fp_arg_regnum;
-};
+ {
+ /* from the elf header */
+ int elf_flags;
+ /* mips options */
+ enum mips_abi mips_abi;
+ const char *mips_abi_string;
+ enum mips_fpu_type mips_fpu_type;
+ int mips_last_arg_regnum;
+ int mips_last_fp_arg_regnum;
+ int mips_default_saved_regsize;
+ int mips_fp_register_double;
+ int mips_regs_have_home_p;
+ int mips_default_stack_argsize;
+ int gdb_target_is_mips64;
+ int default_mask_address_p;
+ };
#if GDB_MULTI_ARCH
#undef MIPS_EABI
-#define MIPS_EABI (gdbarch_tdep (current_gdbarch)->mips_eabi)
+#define MIPS_EABI (gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI32 \
+ || gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI64)
#endif
#if GDB_MULTI_ARCH
#define MIPS_FPU_TYPE (gdbarch_tdep (current_gdbarch)->mips_fpu_type)
#endif
-/* end-sanitize-carp end-sanitize-vr4xxx */
+/* Return the currently configured (or set) saved register size. */
-#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
+#if GDB_MULTI_ARCH
+#undef MIPS_DEFAULT_SAVED_REGSIZE
+#define MIPS_DEFAULT_SAVED_REGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_saved_regsize)
+#elif !defined (MIPS_DEFAULT_SAVED_REGSIZE)
+#define MIPS_DEFAULT_SAVED_REGSIZE MIPS_REGSIZE
+#endif
-/* Do not use "TARGET_IS_MIPS64" to test the size of floating point registers */
-#define FP_REGISTER_DOUBLE (REGISTER_VIRTUAL_SIZE(FP0_REGNUM) == 8)
+static const char *mips_saved_regsize_string = size_auto;
-#if 0
-static int mips_in_lenient_prologue PARAMS ((CORE_ADDR, CORE_ADDR));
+#define MIPS_SAVED_REGSIZE (mips_saved_regsize())
+
+static unsigned int
+mips_saved_regsize (void)
+{
+ if (mips_saved_regsize_string == size_auto)
+ return MIPS_DEFAULT_SAVED_REGSIZE;
+ else if (mips_saved_regsize_string == size_64)
+ return 8;
+ else /* if (mips_saved_regsize_string == size_32) */
+ return 4;
+}
+
+/* Indicate that the ABI makes use of double-precision registers
+ provided by the FPU (rather than combining pairs of registers to
+ form double-precision values). Do not use "TARGET_IS_MIPS64" to
+ determine if the ABI is using double-precision registers. See also
+ MIPS_FPU_TYPE. */
+#if GDB_MULTI_ARCH
+#undef FP_REGISTER_DOUBLE
+#define FP_REGISTER_DOUBLE (gdbarch_tdep (current_gdbarch)->mips_fp_register_double)
#endif
-int gdb_print_insn_mips PARAMS ((bfd_vma, disassemble_info *));
+/* Does the caller allocate a ``home'' for each register used in the
+ function call? The N32 ABI and MIPS_EABI do not, the others do. */
-static void mips_print_register PARAMS ((int, int));
+#if GDB_MULTI_ARCH
+#undef MIPS_REGS_HAVE_HOME_P
+#define MIPS_REGS_HAVE_HOME_P (gdbarch_tdep (current_gdbarch)->mips_regs_have_home_p)
+#elif !defined (MIPS_REGS_HAVE_HOME_P)
+#define MIPS_REGS_HAVE_HOME_P (!MIPS_EABI)
+#endif
-static mips_extra_func_info_t
-heuristic_proc_desc PARAMS ((CORE_ADDR, CORE_ADDR, struct frame_info *));
+/* The amount of space reserved on the stack for registers. This is
+ different to MIPS_SAVED_REGSIZE as it determines the alignment of
+ data allocated after the registers have run out. */
-static CORE_ADDR heuristic_proc_start PARAMS ((CORE_ADDR));
+#if GDB_MULTI_ARCH
+#undef MIPS_DEFAULT_STACK_ARGSIZE
+#define MIPS_DEFAULT_STACK_ARGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_stack_argsize)
+#elif !defined (MIPS_DEFAULT_STACK_ARGSIZE)
+#define MIPS_DEFAULT_STACK_ARGSIZE (MIPS_DEFAULT_SAVED_REGSIZE)
+#endif
+
+#define MIPS_STACK_ARGSIZE (mips_stack_argsize ())
+
+static const char *mips_stack_argsize_string = size_auto;
+
+static unsigned int
+mips_stack_argsize (void)
+{
+ if (mips_stack_argsize_string == size_auto)
+ return MIPS_DEFAULT_STACK_ARGSIZE;
+ else if (mips_stack_argsize_string == size_64)
+ return 8;
+ else /* if (mips_stack_argsize_string == size_32) */
+ return 4;
+}
+
+#if GDB_MULTI_ARCH
+#undef GDB_TARGET_IS_MIPS64
+#define GDB_TARGET_IS_MIPS64 (gdbarch_tdep (current_gdbarch)->gdb_target_is_mips64 + 0)
+#endif
+
+#if GDB_MULTI_ARCH
+#undef MIPS_DEFAULT_MASK_ADDRESS_P
+#define MIPS_DEFAULT_MASK_ADDRESS_P (gdbarch_tdep (current_gdbarch)->default_mask_address_p)
+#elif !defined (MIPS_DEFAULT_MASK_ADDRESS_P)
+#define MIPS_DEFAULT_MASK_ADDRESS_P (0)
+#endif
+
+#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
+
+int gdb_print_insn_mips (bfd_vma, disassemble_info *);
-static CORE_ADDR read_next_frame_reg PARAMS ((struct frame_info *, int));
+static void mips_print_register (int, int);
-void mips_set_processor_type_command PARAMS ((char *, int));
+static mips_extra_func_info_t
+heuristic_proc_desc (CORE_ADDR, CORE_ADDR, struct frame_info *, int);
+
+static CORE_ADDR heuristic_proc_start (CORE_ADDR);
-int mips_set_processor_type PARAMS ((char *));
+static CORE_ADDR read_next_frame_reg (struct frame_info *, int);
-static void mips_show_processor_type_command PARAMS ((char *, int));
+int mips_set_processor_type (char *);
-static void reinit_frame_cache_sfunc PARAMS ((char *, int,
- struct cmd_list_element *));
+static void mips_show_processor_type_command (char *, int);
+
+static void reinit_frame_cache_sfunc (char *, int, struct cmd_list_element *);
static mips_extra_func_info_t
- find_proc_desc PARAMS ((CORE_ADDR pc, struct frame_info *next_frame));
+find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame);
-static CORE_ADDR after_prologue PARAMS ((CORE_ADDR pc,
- mips_extra_func_info_t proc_desc));
+static CORE_ADDR after_prologue (CORE_ADDR pc,
+ mips_extra_func_info_t proc_desc);
/* This value is the model of MIPS in use. It is derived from the value
of the PrID register. */
char *tmp_mips_processor_type;
+/* The list of available "set mips " and "show mips " commands */
+
+static struct cmd_list_element *setmipscmdlist = NULL;
+static struct cmd_list_element *showmipscmdlist = NULL;
+
/* A set of original names, to be used when restoring back to generic
registers from a specific set. */
-char *mips_generic_reg_names[] = REGISTER_NAMES;
+char *mips_generic_reg_names[] = MIPS_REGISTER_NAMES;
+char **mips_processor_reg_names = mips_generic_reg_names;
+char *
+mips_register_name (int i)
+{
+ return mips_processor_reg_names[i];
+}
+/* *INDENT-OFF* */
/* Names of IDT R3041 registers. */
char *mips_r3041_reg_names[] = {
{ "lsi33k", mips_lsi33k_reg_names },
{ NULL, NULL }
};
+/* *INDENT-ON* */
+
+
+
/* Table to translate MIPS16 register field to actual register number. */
-static int mips16_to_32_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 };
+static int mips16_to_32_reg[8] =
+{16, 17, 2, 3, 4, 5, 6, 7};
/* Heuristic_proc_start may hunt through the text section for a long
time across a 2400 baud serial line. Allows the user to limit this
static unsigned int heuristic_fence_post = 0;
-#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
-#define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */
+#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
+#define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */
#define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset)
#define PROC_FRAME_REG(proc) ((proc)->pdr.framereg)
#define PROC_FRAME_ADJUST(proc) ((proc)->frame_adjust)
#define SET_PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym = _PROC_MAGIC_)
struct linked_proc_info
+ {
+ struct mips_extra_func_info info;
+ struct linked_proc_info *next;
+ }
+ *linked_proc_desc_table = NULL;
+
+void
+mips_print_extra_frame_info (struct frame_info *fi)
+{
+ if (fi
+ && fi->extra_info
+ && fi->extra_info->proc_desc
+ && fi->extra_info->proc_desc->pdr.framereg < NUM_REGS)
+ printf_filtered (" frame pointer is at %s+%s\n",
+ REGISTER_NAME (fi->extra_info->proc_desc->pdr.framereg),
+ paddr_d (fi->extra_info->proc_desc->pdr.frameoffset));
+}
+
+/* Number of bytes of storage in the actual machine representation for
+ register N. NOTE: This indirectly defines the register size
+ transfered by the GDB protocol. */
+
+static int mips64_transfers_32bit_regs_p = 0;
+
+int
+mips_register_raw_size (int reg_nr)
+{
+ if (mips64_transfers_32bit_regs_p)
+ return REGISTER_VIRTUAL_SIZE (reg_nr);
+ else if (reg_nr >= FP0_REGNUM && reg_nr < FP0_REGNUM + 32
+ && FP_REGISTER_DOUBLE)
+ /* For MIPS_ABI_N32 (for example) we need 8 byte floating point
+ registers. */
+ return 8;
+ else
+ return MIPS_REGSIZE;
+}
+
+/* Convert between RAW and VIRTUAL registers. The RAW register size
+ defines the remote-gdb packet. */
+
+int
+mips_register_convertible (int reg_nr)
+{
+ if (mips64_transfers_32bit_regs_p)
+ return 0;
+ else
+ return (REGISTER_RAW_SIZE (reg_nr) > REGISTER_VIRTUAL_SIZE (reg_nr));
+}
+
+void
+mips_register_convert_to_virtual (int n, struct type *virtual_type,
+ char *raw_buf, char *virt_buf)
{
- struct mips_extra_func_info info;
- struct linked_proc_info *next;
-} *linked_proc_desc_table = NULL;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ memcpy (virt_buf,
+ raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
+ TYPE_LENGTH (virtual_type));
+ else
+ memcpy (virt_buf,
+ raw_buf,
+ TYPE_LENGTH (virtual_type));
+}
+void
+mips_register_convert_to_raw (struct type *virtual_type, int n,
+ char *virt_buf, char *raw_buf)
+{
+ memset (raw_buf, 0, REGISTER_RAW_SIZE (n));
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ memcpy (raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)),
+ virt_buf,
+ TYPE_LENGTH (virtual_type));
+ else
+ memcpy (raw_buf,
+ virt_buf,
+ TYPE_LENGTH (virtual_type));
+}
/* Should the upper word of 64-bit addresses be zeroed? */
-static int mask_address_p = 1;
+enum cmd_auto_boolean mask_address_var = CMD_AUTO_BOOLEAN_AUTO;
+
+static int
+mips_mask_address_p (void)
+{
+ switch (mask_address_var)
+ {
+ case CMD_AUTO_BOOLEAN_TRUE:
+ return 1;
+ case CMD_AUTO_BOOLEAN_FALSE:
+ return 0;
+ break;
+ case CMD_AUTO_BOOLEAN_AUTO:
+ return MIPS_DEFAULT_MASK_ADDRESS_P;
+ default:
+ internal_error (__FILE__, __LINE__,
+ "mips_mask_address_p: bad switch");
+ return -1;
+ }
+}
+
+static void
+show_mask_address (char *cmd, int from_tty)
+{
+ switch (mask_address_var)
+ {
+ case CMD_AUTO_BOOLEAN_TRUE:
+ printf_filtered ("The 32 bit mips address mask is enabled\n");
+ break;
+ case CMD_AUTO_BOOLEAN_FALSE:
+ printf_filtered ("The 32 bit mips address mask is disabled\n");
+ break;
+ case CMD_AUTO_BOOLEAN_AUTO:
+ printf_filtered ("The 32 bit address mask is set automatically. Currently %s\n",
+ mips_mask_address_p () ? "enabled" : "disabled");
+ break;
+ default:
+ internal_error (__FILE__, __LINE__,
+ "show_mask_address: bad switch");
+ break;
+ }
+}
/* Should call_function allocate stack space for a struct return? */
int
-mips_use_struct_convention (gcc_p, type)
- int gcc_p;
- struct type *type;
+mips_use_struct_convention (int gcc_p, struct type *type)
{
if (MIPS_EABI)
- return (TYPE_LENGTH (type) > 2 * MIPS_REGSIZE);
+ return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE);
else
- return 1; /* Structures are returned by ref in extra arg0 */
+ return 1; /* Structures are returned by ref in extra arg0 */
}
/* Tell if the program counter value in MEMADDR is in a MIPS16 function. */
return 0;
}
+/* MIPS believes that the PC has a sign extended value. Perhaphs the
+ all registers should be sign extended for simplicity? */
+
+static CORE_ADDR
+mips_read_pc (ptid_t ptid)
+{
+ return read_signed_register_pid (PC_REGNUM, ptid);
+}
/* This returns the PC of the first inst after the prologue. If we can't
find the prologue, then return 0. */
static CORE_ADDR
-after_prologue (pc, proc_desc)
- CORE_ADDR pc;
- mips_extra_func_info_t proc_desc;
+after_prologue (CORE_ADDR pc,
+ mips_extra_func_info_t proc_desc)
{
struct symtab_and_line sal;
CORE_ADDR func_addr, func_end;
+ /* Pass cur_frame == 0 to find_proc_desc. We should not attempt
+ to read the stack pointer from the current machine state, because
+ the current machine state has nothing to do with the information
+ we need from the proc_desc; and the process may or may not exist
+ right now. */
if (!proc_desc)
- proc_desc = find_proc_desc (pc, NULL);
+ proc_desc = find_proc_desc (pc, NULL, 0);
if (proc_desc)
{
/* If function is frameless, then we need to do it the hard way. I
- strongly suspect that frameless always means prologueless... */
+ strongly suspect that frameless always means prologueless... */
if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
&& PROC_FRAME_OFFSET (proc_desc) == 0)
return 0;
for mips_find_saved_regs. */
static void
-mips32_decode_reg_save (inst, gen_mask, float_mask)
- t_inst inst;
- unsigned long *gen_mask;
- unsigned long *float_mask;
+mips32_decode_reg_save (t_inst inst, unsigned long *gen_mask,
+ unsigned long *float_mask)
{
int reg;
if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */
|| (inst & 0xffe00000) == 0xafc00000 /* sw reg,n($r30) */
- /* start-sanitize-r5900 */
- || (inst & 0xffe00000) == 0x7fa00000 /* sq reg,n($sp) */
- /* end-sanitize-r5900 */
|| (inst & 0xffe00000) == 0xffa00000) /* sd reg,n($sp) */
{
/* It might be possible to use the instruction to
- find the offset, rather than the code below which
- is based on things being in a certain order in the
- frame, but figuring out what the instruction's offset
- is relative to might be a little tricky. */
+ find the offset, rather than the code below which
+ is based on things being in a certain order in the
+ frame, but figuring out what the instruction's offset
+ is relative to might be a little tricky. */
reg = (inst & 0x001f0000) >> 16;
*gen_mask |= (1 << reg);
}
else if ((inst & 0xffe00000) == 0xe7a00000 /* swc1 freg,n($sp) */
- || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
- || (inst & 0xffe00000) == 0xf7a00000)/* sdc1 freg,n($sp) */
+ || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */
+ || (inst & 0xffe00000) == 0xf7a00000) /* sdc1 freg,n($sp) */
{
reg = ((inst & 0x001f0000) >> 16);
for mips_find_saved_regs. */
static void
-mips16_decode_reg_save (inst, gen_mask)
- t_inst inst;
- unsigned long *gen_mask;
+mips16_decode_reg_save (t_inst inst, unsigned long *gen_mask)
{
- if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
+ if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */
{
int reg = mips16_to_32_reg[(inst & 0x700) >> 8];
*gen_mask |= (1 << reg);
}
- else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
+ else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
{
int reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
*gen_mask |= (1 << reg);
}
- else if ((inst & 0xff00) == 0x6200 /* sw $ra,n($sp) */
+ else if ((inst & 0xff00) == 0x6200 /* sw $ra,n($sp) */
|| (inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
*gen_mask |= (1 << RA_REGNUM);
}
is odd, assume it's a MIPS16 instruction; otherwise MIPS32. */
static t_inst
-mips_fetch_instruction (addr)
- CORE_ADDR addr;
+mips_fetch_instruction (CORE_ADDR addr)
{
char buf[MIPS_INSTLEN];
int instlen;
addr = UNMAKE_MIPS16_ADDR (addr);
}
else
- instlen = MIPS_INSTLEN;
+ instlen = MIPS_INSTLEN;
status = read_memory_nobpt (addr, buf, instlen);
if (status)
memory_error (status, addr);
/* These the fields of 32 bit mips instructions */
-#define mips32_op(x) (x >> 25)
-#define itype_op(x) (x >> 25)
-#define itype_rs(x) ((x >> 21)& 0x1f)
+#define mips32_op(x) (x >> 26)
+#define itype_op(x) (x >> 26)
+#define itype_rs(x) ((x >> 21) & 0x1f)
#define itype_rt(x) ((x >> 16) & 0x1f)
-#define itype_immediate(x) ( x & 0xffff)
+#define itype_immediate(x) (x & 0xffff)
-#define jtype_op(x) (x >> 25)
-#define jtype_target(x) ( x & 0x03fffff)
+#define jtype_op(x) (x >> 26)
+#define jtype_target(x) (x & 0x03ffffff)
-#define rtype_op(x) (x >>25)
-#define rtype_rs(x) ((x>>21) & 0x1f)
-#define rtype_rt(x) ((x>>16) & 0x1f)
-#define rtype_rd(x) ((x>>11) & 0x1f)
-#define rtype_shamt(x) ((x>>6) & 0x1f)
-#define rtype_funct(x) (x & 0x3f )
+#define rtype_op(x) (x >> 26)
+#define rtype_rs(x) ((x >> 21) & 0x1f)
+#define rtype_rt(x) ((x >> 16) & 0x1f)
+#define rtype_rd(x) ((x >> 11) & 0x1f)
+#define rtype_shamt(x) ((x >> 6) & 0x1f)
+#define rtype_funct(x) (x & 0x3f)
static CORE_ADDR
-mips32_relative_offset(unsigned long inst)
-{ long x ;
- x = itype_immediate(inst) ;
- if (x & 0x8000) /* sign bit set */
+mips32_relative_offset (unsigned long inst)
+{
+ long x;
+ x = itype_immediate (inst);
+ if (x & 0x8000) /* sign bit set */
{
- x |= 0xffff0000 ; /* sign extension */
+ x |= 0xffff0000; /* sign extension */
}
- x = x << 2 ;
- return x ;
+ x = x << 2;
+ return x;
}
/* Determine whate to set a single step breakpoint while considering
branch prediction */
CORE_ADDR
-mips32_next_pc(CORE_ADDR pc)
-{
- unsigned long inst ;
- int op ;
- inst = mips_fetch_instruction(pc) ;
- if ((inst & 0xe0000000) != 0) /* Not a special, junp or branch instruction */
- { if ((inst >> 27) == 5) /* BEQL BNEZ BLEZL BGTZE , bits 0101xx */
- { op = ((inst >> 25) & 0x03) ;
+mips32_next_pc (CORE_ADDR pc)
+{
+ unsigned long inst;
+ int op;
+ inst = mips_fetch_instruction (pc);
+ if ((inst & 0xe0000000) != 0) /* Not a special, jump or branch instruction */
+ {
+ if (itype_op (inst) >> 2 == 5)
+ /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
+ {
+ op = (itype_op (inst) & 0x03);
switch (op)
{
- case 0 : goto equal_branch ; /* BEQL */
- case 1 : goto neq_branch ; /* BNEZ */
- case 2 : goto less_branch ; /* BLEZ */
- case 3 : goto greater_branch ; /* BGTZ */
- default : pc += 4 ;
+ case 0: /* BEQL */
+ goto equal_branch;
+ case 1: /* BNEL */
+ goto neq_branch;
+ case 2: /* BLEZL */
+ goto less_branch;
+ case 3: /* BGTZ */
+ goto greater_branch;
+ default:
+ pc += 4;
}
}
- else pc += 4 ; /* Not a branch, next instruction is easy */
+ else if (itype_op (inst) == 17 && itype_rs (inst) == 8)
+ /* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
+ {
+ int tf = itype_rt (inst) & 0x01;
+ int cnum = itype_rt (inst) >> 2;
+ int fcrcs = read_signed_register (FCRCS_REGNUM);
+ int cond = ((fcrcs >> 24) & 0x0e) | ((fcrcs >> 23) & 0x01);
+
+ if (((cond >> cnum) & 0x01) == tf)
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ }
+ else
+ pc += 4; /* Not a branch, next instruction is easy */
}
else
- { /* This gets way messy */
-
+ { /* This gets way messy */
+
/* Further subdivide into SPECIAL, REGIMM and other */
- switch (op = ((inst >> 26) & 0x07)) /* extract bits 28,27,26 */
+ switch (op = itype_op (inst) & 0x07) /* extract bits 28,27,26 */
{
- case 0 : /* SPECIAL */
- op = rtype_funct(inst) ;
- switch (op)
- {
- case 8 : /* JR */
- case 9 : /* JALR */
- pc = read_register(rtype_rs(inst)) ; /* Set PC to that address */
- break ;
- default: pc += 4 ;
- }
-
- break ; /* end special */
- case 1 : /* REGIMM */
+ case 0: /* SPECIAL */
+ op = rtype_funct (inst);
+ switch (op)
+ {
+ case 8: /* JR */
+ case 9: /* JALR */
+ /* Set PC to that address */
+ pc = read_signed_register (rtype_rs (inst));
+ break;
+ default:
+ pc += 4;
+ }
+
+ break; /* end SPECIAL */
+ case 1: /* REGIMM */
{
- op = jtype_op(inst) ; /* branch condition */
- switch (jtype_op(inst))
+ op = itype_rt (inst); /* branch condition */
+ switch (op)
{
- case 0 : /* BLTZ */
- case 2 : /* BLTXL */
- case 16 : /* BLTZALL */
- case 18 : /* BLTZALL */
+ case 0: /* BLTZ */
+ case 2: /* BLTZL */
+ case 16: /* BLTZAL */
+ case 18: /* BLTZALL */
less_branch:
- if (read_register(itype_rs(inst)) < 0)
- pc += mips32_relative_offset(inst) + 4 ;
- else pc += 8 ; /* after the delay slot */
- break ;
- case 1 : /* GEZ */
- case 3 : /* BGEZL */
- case 17 : /* BGEZAL */
- case 19 : /* BGEZALL */
+ if (read_signed_register (itype_rs (inst)) < 0)
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8; /* after the delay slot */
+ break;
+ case 1: /* BGEZ */
+ case 3: /* BGEZL */
+ case 17: /* BGEZAL */
+ case 19: /* BGEZALL */
greater_equal_branch:
- if (read_register(itype_rs(inst)) >= 0)
- pc += mips32_relative_offset(inst) + 4 ;
- else pc += 8 ; /* after the delay slot */
- break ;
- /* All of the other intructions in the REGIMM catagory */
- default: pc += 4 ;
+ if (read_signed_register (itype_rs (inst)) >= 0)
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8; /* after the delay slot */
+ break;
+ /* All of the other instructions in the REGIMM category */
+ default:
+ pc += 4;
}
}
- break ; /* end REGIMM */
- case 2 : /* J */
- case 3 : /* JAL */
- { unsigned long reg ;
- reg = jtype_target(inst) << 2 ;
- pc = reg + ((pc+4) & 0xf0000000) ;
- /* Whats this mysterious 0xf000000 adjustment ??? */
+ break; /* end REGIMM */
+ case 2: /* J */
+ case 3: /* JAL */
+ {
+ unsigned long reg;
+ reg = jtype_target (inst) << 2;
+ /* Upper four bits get never changed... */
+ pc = reg + ((pc + 4) & 0xf0000000);
}
- break ;
- /* FIXME case JALX :*/
- { unsigned long reg ;
- reg = jtype_target(inst) << 2 ;
- pc = reg + ((pc+4) & 0xf0000000) + 1 ; /* yes, +1 */
+ break;
+ /* FIXME case JALX : */
+ {
+ unsigned long reg;
+ reg = jtype_target (inst) << 2;
+ pc = reg + ((pc + 4) & 0xf0000000) + 1; /* yes, +1 */
/* Add 1 to indicate 16 bit mode - Invert ISA mode */
}
- break ; /* The new PC will be alternate mode */
- case 4 : /* BEQ , BEQL */
- equal_branch :
- if (read_register(itype_rs(inst)) ==
- read_register(itype_rt(inst)))
- pc += mips32_relative_offset(inst) + 4 ;
- else pc += 8 ;
- break ;
- case 5 : /* BNE , BNEL */
- neq_branch :
- if (read_register(itype_rs(inst)) !=
- read_register(itype_rs(inst)))
- pc += mips32_relative_offset(inst) + 4 ;
- else pc += 8 ;
- break ;
- case 6 : /* BLEZ , BLEZL */
+ break; /* The new PC will be alternate mode */
+ case 4: /* BEQ, BEQL */
+ equal_branch:
+ if (read_signed_register (itype_rs (inst)) ==
+ read_signed_register (itype_rt (inst)))
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ break;
+ case 5: /* BNE, BNEL */
+ neq_branch:
+ if (read_signed_register (itype_rs (inst)) !=
+ read_signed_register (itype_rt (inst)))
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ break;
+ case 6: /* BLEZ, BLEZL */
less_zero_branch:
- if (read_register(itype_rs(inst) <= 0))
- pc += mips32_relative_offset(inst) + 4 ;
- else pc += 8 ;
- break ;
- case 7 :
- greater_branch : /* BGTZ BGTZL */
- if (read_register(itype_rs(inst) > 0))
- pc += mips32_relative_offset(inst) + 4 ;
- else pc += 8 ;
- break ;
- default : pc += 8 ;
- } /* switch */
- } /* else */
- return pc ;
-} /* mips32_next_pc */
+ if (read_signed_register (itype_rs (inst) <= 0))
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ break;
+ case 7:
+ default:
+ greater_branch: /* BGTZ, BGTZL */
+ if (read_signed_register (itype_rs (inst) > 0))
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ break;
+ } /* switch */
+ } /* else */
+ return pc;
+} /* mips32_next_pc */
/* Decoding the next place to set a breakpoint is irregular for the
- mips 16 variant, but fortunatly, there fewer instructions. We have to cope
+ mips 16 variant, but fortunately, there fewer instructions. We have to cope
ith extensions for 16 bit instructions and a pair of actual 32 bit instructions.
We dont want to set a single step instruction on the extend instruction
either.
- */
+ */
/* Lots of mips16 instruction formats */
/* Predicting jumps requires itype,ritype,i8type
and their extensions extItype,extritype,extI8type
- */
+ */
enum mips16_inst_fmts
{
- itype, /* 0 immediate 5,10 */
- ritype, /* 1 5,3,8 */
- rrtype, /* 2 5,3,3,5 */
- rritype, /* 3 5,3,3,5 */
- rrrtype, /* 4 5,3,3,3,2 */
- rriatype, /* 5 5,3,3,1,4 */
- shifttype, /* 6 5,3,3,3,2 */
- i8type, /* 7 5,3,8 */
- i8movtype, /* 8 5,3,3,5 */
- i8mov32rtype, /* 9 5,3,5,3 */
- i64type, /* 10 5,3,8 */
- ri64type, /* 11 5,3,3,5 */
- jalxtype, /* 12 5,1,5,5,16 - a 32 bit instruction */
- exiItype, /* 13 5,6,5,5,1,1,1,1,1,1,5 */
- extRitype, /* 14 5,6,5,5,3,1,1,1,5 */
- extRRItype, /* 15 5,5,5,5,3,3,5 */
- extRRIAtype, /* 16 5,7,4,5,3,3,1,4 */
- EXTshifttype, /* 17 5,5,1,1,1,1,1,1,5,3,3,1,1,1,2 */
- extI8type, /* 18 5,6,5,5,3,1,1,1,5 */
- extI64type, /* 19 5,6,5,5,3,1,1,1,5 */
- extRi64type, /* 20 5,6,5,5,3,3,5 */
- extshift64type /* 21 5,5,1,1,1,1,1,1,5,1,1,1,3,5 */
-} ;
-/* I am heaping all the fields of the formats into one structure and then,
- only the fields which are involved in instruction extension */
+ itype, /* 0 immediate 5,10 */
+ ritype, /* 1 5,3,8 */
+ rrtype, /* 2 5,3,3,5 */
+ rritype, /* 3 5,3,3,5 */
+ rrrtype, /* 4 5,3,3,3,2 */
+ rriatype, /* 5 5,3,3,1,4 */
+ shifttype, /* 6 5,3,3,3,2 */
+ i8type, /* 7 5,3,8 */
+ i8movtype, /* 8 5,3,3,5 */
+ i8mov32rtype, /* 9 5,3,5,3 */
+ i64type, /* 10 5,3,8 */
+ ri64type, /* 11 5,3,3,5 */
+ jalxtype, /* 12 5,1,5,5,16 - a 32 bit instruction */
+ exiItype, /* 13 5,6,5,5,1,1,1,1,1,1,5 */
+ extRitype, /* 14 5,6,5,5,3,1,1,1,5 */
+ extRRItype, /* 15 5,5,5,5,3,3,5 */
+ extRRIAtype, /* 16 5,7,4,5,3,3,1,4 */
+ EXTshifttype, /* 17 5,5,1,1,1,1,1,1,5,3,3,1,1,1,2 */
+ extI8type, /* 18 5,6,5,5,3,1,1,1,5 */
+ extI64type, /* 19 5,6,5,5,3,1,1,1,5 */
+ extRi64type, /* 20 5,6,5,5,3,3,5 */
+ extshift64type /* 21 5,5,1,1,1,1,1,1,5,1,1,1,3,5 */
+};
+/* I am heaping all the fields of the formats into one structure and
+ then, only the fields which are involved in instruction extension */
struct upk_mips16
-{
- unsigned short inst ;
- enum mips16_inst_fmts fmt ;
- unsigned long offset ;
- unsigned int regx ; /* Function in i8 type */
- unsigned int regy ;
-} ;
-
+ {
+ CORE_ADDR offset;
+ unsigned int regx; /* Function in i8 type */
+ unsigned int regy;
+ };
-static void print_unpack(char * comment,
- struct upk_mips16 * u)
-{
- printf("%s %04x ,f(%d) off(%08x) (x(%x) y(%x)\n",
- comment,u->inst,u->fmt,u->offset,u->regx,u->regy) ;
-}
+/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same format
+ for the bits which make up the immediatate extension. */
-/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same
- format for the bits which make up the immediatate extension.
- */
-static unsigned long
-extended_offset(unsigned long extension)
+static CORE_ADDR
+extended_offset (unsigned int extension)
{
- unsigned long value ;
- value = (extension >> 21) & 0x3f ; /* * extract 15:11 */
- value = value << 6 ;
- value |= (extension >> 16) & 0x1f ; /* extrace 10:5 */
- value = value << 5 ;
- value |= extension & 0x01f ; /* extract 4:0 */
- return value ;
+ CORE_ADDR value;
+ value = (extension >> 21) & 0x3f; /* * extract 15:11 */
+ value = value << 6;
+ value |= (extension >> 16) & 0x1f; /* extrace 10:5 */
+ value = value << 5;
+ value |= extension & 0x01f; /* extract 4:0 */
+ return value;
}
/* Only call this function if you know that this is an extendable
instruction, It wont malfunction, but why make excess remote memory references?
If the immediate operands get sign extended or somthing, do it after
the extension is performed.
- */
+ */
/* FIXME: Every one of these cases needs to worry about sign extension
when the offset is to be used in relative addressing */
-static unsigned short fetch_mips_16(CORE_ADDR pc)
+static unsigned int
+fetch_mips_16 (CORE_ADDR pc)
{
- char buf[8] ;
- pc &= 0xfffffffe ; /* clear the low order bit */
- target_read_memory(pc,buf,2) ;
- return extract_unsigned_integer(buf,2) ;
+ char buf[8];
+ pc &= 0xfffffffe; /* clear the low order bit */
+ target_read_memory (pc, buf, 2);
+ return extract_unsigned_integer (buf, 2);
}
static void
-unpack_mips16(CORE_ADDR pc,
- struct upk_mips16 * upk)
-{
- CORE_ADDR extpc ;
- unsigned long extension ;
- int extended ;
- extpc = (pc - 4) & ~0x01 ; /* Extensions are 32 bit instructions */
- /* Decrement to previous address and loose the 16bit mode flag */
- /* return if the instruction was extendable, but not actually extended */
- extended = ((mips32_op(extension) == 30) ? 1 : 0) ;
- if (extended) { extension = mips_fetch_instruction(extpc) ;}
- switch (upk->fmt)
- {
- case itype :
+unpack_mips16 (CORE_ADDR pc,
+ unsigned int extension,
+ unsigned int inst,
+ enum mips16_inst_fmts insn_format,
+ struct upk_mips16 *upk)
+{
+ CORE_ADDR offset;
+ int regx;
+ int regy;
+ switch (insn_format)
+ {
+ case itype:
{
- unsigned long value ;
- if (extended)
- { value = extended_offset(extension) ;
- value = value << 11 ; /* rom for the original value */
- value |= upk->inst & 0x7ff ; /* eleven bits from instruction */
+ CORE_ADDR value;
+ if (extension)
+ {
+ value = extended_offset (extension);
+ value = value << 11; /* rom for the original value */
+ value |= inst & 0x7ff; /* eleven bits from instruction */
}
else
- { value = upk->inst & 0x7ff ;
- /* FIXME : Consider sign extension */
+ {
+ value = inst & 0x7ff;
+ /* FIXME : Consider sign extension */
}
- upk->offset = value ;
+ offset = value;
+ regx = -1;
+ regy = -1;
}
- break ;
- case ritype :
- case i8type :
- { /* A register identifier and an offset */
+ break;
+ case ritype:
+ case i8type:
+ { /* A register identifier and an offset */
/* Most of the fields are the same as I type but the
immediate value is of a different length */
- unsigned long value ;
- if (extended)
+ CORE_ADDR value;
+ if (extension)
{
- value = extended_offset(extension) ;
- value = value << 8 ; /* from the original instruction */
- value |= upk->inst & 0xff ; /* eleven bits from instruction */
- upk->regx = (extension >> 8) & 0x07 ; /* or i8 funct */
- if (value & 0x4000) /* test the sign bit , bit 26 */
- { value &= ~ 0x3fff ; /* remove the sign bit */
- value = -value ;
+ value = extended_offset (extension);
+ value = value << 8; /* from the original instruction */
+ value |= inst & 0xff; /* eleven bits from instruction */
+ regx = (extension >> 8) & 0x07; /* or i8 funct */
+ if (value & 0x4000) /* test the sign bit , bit 26 */
+ {
+ value &= ~0x3fff; /* remove the sign bit */
+ value = -value;
}
}
- else {
- value = upk->inst & 0xff ; /* 8 bits */
- upk->regx = (upk->inst >> 8) & 0x07 ; /* or i8 funct */
- /* FIXME: Do sign extension , this format needs it */
- if (value & 0x80) /* THIS CONFUSES ME */
- { value &= 0xef ; /* remove the sign bit */
- value = -value ;
- }
-
- }
- upk->offset = value ;
- break ;
+ else
+ {
+ value = inst & 0xff; /* 8 bits */
+ regx = (inst >> 8) & 0x07; /* or i8 funct */
+ /* FIXME: Do sign extension , this format needs it */
+ if (value & 0x80) /* THIS CONFUSES ME */
+ {
+ value &= 0xef; /* remove the sign bit */
+ value = -value;
+ }
+ }
+ offset = value;
+ regy = -1;
+ break;
}
- case jalxtype :
+ case jalxtype:
{
- unsigned long value ;
- unsigned short nexthalf ;
- value = ((upk->inst & 0x1f) << 5) | ((upk->inst >> 5) & 0x1f) ;
- value = value << 16 ;
- nexthalf = mips_fetch_instruction(pc+2) ; /* low bit still set */
- value |= nexthalf ;
- upk->offset = value ;
- break ;
+ unsigned long value;
+ unsigned int nexthalf;
+ value = ((inst & 0x1f) << 5) | ((inst >> 5) & 0x1f);
+ value = value << 16;
+ nexthalf = mips_fetch_instruction (pc + 2); /* low bit still set */
+ value |= nexthalf;
+ offset = value;
+ regx = -1;
+ regy = -1;
+ break;
}
default:
- printf_filtered("Decoding unimplemented instruction format type\n") ;
- break ;
+ internal_error (__FILE__, __LINE__,
+ "bad switch");
}
- /* print_unpack("UPK",upk) ; */
+ upk->offset = offset;
+ upk->regx = regx;
+ upk->regy = regy;
}
-#define mips16_op(x) (x >> 11)
-
-/* This is a map of the opcodes which ae known to perform branches */
-static unsigned char map16[32] =
-{ 0,0,1,1,1,1,0,0,
- 0,0,0,0,1,0,0,0,
- 0,0,0,0,0,0,0,0,
- 0,0,0,0,0,1,1,0
-} ;
-
-static CORE_ADDR add_offset_16(CORE_ADDR pc, int offset)
+static CORE_ADDR
+add_offset_16 (CORE_ADDR pc, int offset)
{
- return ((offset << 2) | ((pc + 2) & (0xf0000000))) ;
-
-}
+ return ((offset << 2) | ((pc + 2) & (0xf0000000)));
+}
-
-static struct upk_mips16 upk ;
-
-CORE_ADDR mips16_next_pc(CORE_ADDR pc)
+static CORE_ADDR
+extended_mips16_next_pc (CORE_ADDR pc,
+ unsigned int extension,
+ unsigned int insn)
{
- int op ;
- t_inst inst ;
- /* inst = mips_fetch_instruction(pc) ; - This doesnt always work */
- inst = fetch_mips_16(pc) ;
- upk.inst = inst ;
- op = mips16_op(upk.inst) ;
- if (map16[op])
+ int op = (insn >> 11);
+ switch (op)
{
- int reg ;
- switch (op)
- {
- case 2 : /* Branch */
- upk.fmt = itype ;
- unpack_mips16(pc,&upk) ;
- { long offset ;
- offset = upk.offset ;
- if (offset & 0x800)
- { offset &= 0xeff ;
- offset = - offset ;
+ case 2: /* Branch */
+ {
+ CORE_ADDR offset;
+ struct upk_mips16 upk;
+ unpack_mips16 (pc, extension, insn, itype, &upk);
+ offset = upk.offset;
+ if (offset & 0x800)
+ {
+ offset &= 0xeff;
+ offset = -offset;
+ }
+ pc += (offset << 1) + 2;
+ break;
+ }
+ case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */
+ {
+ struct upk_mips16 upk;
+ unpack_mips16 (pc, extension, insn, jalxtype, &upk);
+ pc = add_offset_16 (pc, upk.offset);
+ if ((insn >> 10) & 0x01) /* Exchange mode */
+ pc = pc & ~0x01; /* Clear low bit, indicate 32 bit mode */
+ else
+ pc |= 0x01;
+ break;
+ }
+ case 4: /* beqz */
+ {
+ struct upk_mips16 upk;
+ int reg;
+ unpack_mips16 (pc, extension, insn, ritype, &upk);
+ reg = read_signed_register (upk.regx);
+ if (reg == 0)
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ }
+ case 5: /* bnez */
+ {
+ struct upk_mips16 upk;
+ int reg;
+ unpack_mips16 (pc, extension, insn, ritype, &upk);
+ reg = read_signed_register (upk.regx);
+ if (reg != 0)
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ }
+ case 12: /* I8 Formats btez btnez */
+ {
+ struct upk_mips16 upk;
+ int reg;
+ unpack_mips16 (pc, extension, insn, i8type, &upk);
+ /* upk.regx contains the opcode */
+ reg = read_signed_register (24); /* Test register is 24 */
+ if (((upk.regx == 0) && (reg == 0)) /* BTEZ */
+ || ((upk.regx == 1) && (reg != 0))) /* BTNEZ */
+ /* pc = add_offset_16(pc,upk.offset) ; */
+ pc += (upk.offset << 1) + 2;
+ else
+ pc += 2;
+ break;
+ }
+ case 29: /* RR Formats JR, JALR, JALR-RA */
+ {
+ struct upk_mips16 upk;
+ /* upk.fmt = rrtype; */
+ op = insn & 0x1f;
+ if (op == 0)
+ {
+ int reg;
+ upk.regx = (insn >> 8) & 0x07;
+ upk.regy = (insn >> 5) & 0x07;
+ switch (upk.regy)
+ {
+ case 0:
+ reg = upk.regx;
+ break;
+ case 1:
+ reg = 31;
+ break; /* Function return instruction */
+ case 2:
+ reg = upk.regx;
+ break;
+ default:
+ reg = 31;
+ break; /* BOGUS Guess */
}
- pc += (offset << 1) + 2 ;
+ pc = read_signed_register (reg);
}
- break ;
- case 3 : /* JAL , JALX - Watch out, these are 32 bit instruction*/
- upk.fmt = jalxtype ;
- unpack_mips16(pc,&upk) ;
- pc = add_offset_16(pc,upk.offset) ;
- if ((upk.inst >> 10) & 0x01) /* Exchange mode */
- pc = pc & ~ 0x01 ; /* Clear low bit, indicate 32 bit mode */
- else pc |= 0x01 ;
- break ;
- case 4 : /* beqz */
- upk.fmt = ritype ;
- unpack_mips16(pc,&upk) ;
- reg = read_register(upk.regx) ;
- if (reg == 0)
- pc += (upk.offset << 1) + 2 ;
- else pc += 2 ;
- break ;
- case 5 : /* bnez */
- upk.fmt = ritype ;
- unpack_mips16(pc,&upk) ;
- reg = read_register(upk.regx) ;
- if (reg != 0)
- pc += (upk.offset << 1) + 2 ;
- else pc += 2 ;
- break ;
- case 12 : /* I8 Formats btez btnez */
- upk.fmt = i8type ;
- unpack_mips16(pc,&upk) ;
- /* upk.regx contains the opcode */
- reg = read_register(24) ; /* Test register is 24 */
- if (((upk.regx == 0) && (reg == 0)) /* BTEZ */
- || ((upk.regx == 1 ) && (reg != 0))) /* BTNEZ */
- /* pc = add_offset_16(pc,upk.offset) ; */
- pc += (upk.offset << 1) + 2 ;
- else pc += 2 ;
- break ;
- case 29 : /* RR Formats JR, JALR, JALR-RA */
- upk.fmt = rrtype ;
- op = upk.inst & 0x1f ;
- if (op == 0)
- {
- upk.regx = (upk.inst >> 8) & 0x07 ;
- upk.regy = (upk.inst >> 5) & 0x07 ;
- switch (upk.regy)
- {
- case 0 : reg = upk.regx ; break ;
- case 1 : reg = 31 ; break ; /* Function return instruction*/
- case 2 : reg = upk.regx ; break ;
- default: reg = 31 ; break ; /* BOGUS Guess */
- }
- pc = read_register(reg) ;
- }
- else pc += 2 ;
- break ;
- case 30 : /* This is an extend instruction */
- pc += 4 ; /* Dont be setting breakpints on the second half */
- break ;
- default :
- printf("Filtered - next PC probably incorrrect due to jump inst\n");
- pc += 2 ;
- break ;
- }
+ else
+ pc += 2;
+ break;
+ }
+ case 30:
+ /* This is an instruction extension. Fetch the real instruction
+ (which follows the extension) and decode things based on
+ that. */
+ {
+ pc += 2;
+ pc = extended_mips16_next_pc (pc, insn, fetch_mips_16 (pc));
+ break;
+ }
+ default:
+ {
+ pc += 2;
+ break;
+ }
}
- else pc+= 2 ; /* just a good old instruction */
- /* See if we CAN actually break on the next instruction */
- /* printf("NXTm16PC %08x\n",(unsigned long)pc) ; */
- return pc ;
-} /* mips16_next_pc */
-
-/* The mips_next_pc function supports single_tep when the remote target monitor or
- stub is not developed enough to so a single_step.
- It works by decoding the current instruction and predicting where a branch
- will go. This isnt hard because all the data is available.
- The MIPS32 and MIPS16 variants are quite different
- */
-CORE_ADDR mips_next_pc(CORE_ADDR pc)
+ return pc;
+}
+
+CORE_ADDR
+mips16_next_pc (CORE_ADDR pc)
+{
+ unsigned int insn = fetch_mips_16 (pc);
+ return extended_mips16_next_pc (pc, 0, insn);
+}
+
+/* The mips_next_pc function supports single_step when the remote
+ target monitor or stub is not developed enough to do a single_step.
+ It works by decoding the current instruction and predicting where a
+ branch will go. This isnt hard because all the data is available.
+ The MIPS32 and MIPS16 variants are quite different */
+CORE_ADDR
+mips_next_pc (CORE_ADDR pc)
{
- t_inst inst ;
- /* inst = mips_fetch_instruction(pc) ; */
- /* if (pc_is_mips16) <----- This is failing */
- if (pc & 0x01)
- return mips16_next_pc(pc) ;
- else return mips32_next_pc(pc) ;
-} /* mips_next_pc */
+ if (pc & 0x01)
+ return mips16_next_pc (pc);
+ else
+ return mips32_next_pc (pc);
+}
/* Guaranteed to set fci->saved_regs to some values (it never leaves it
NULL). */
void
-mips_find_saved_regs (fci)
- struct frame_info *fci;
+mips_find_saved_regs (struct frame_info *fci)
{
int ireg;
CORE_ADDR reg_position;
{
for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
- reg_position = fci->frame + SIGFRAME_REGSAVE_OFF
- + ireg * SIGFRAME_REG_SIZE;
- fci->saved_regs[ireg] = reg_position;
+ reg_position = fci->frame + SIGFRAME_REGSAVE_OFF
+ + ireg * SIGFRAME_REG_SIZE;
+ fci->saved_regs[ireg] = reg_position;
}
for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
{
- reg_position = fci->frame + SIGFRAME_FPREGSAVE_OFF
- + ireg * SIGFRAME_REG_SIZE;
- fci->saved_regs[FP0_REGNUM + ireg] = reg_position;
+ reg_position = fci->frame + SIGFRAME_FPREGSAVE_OFF
+ + ireg * SIGFRAME_REG_SIZE;
+ fci->saved_regs[FP0_REGNUM + ireg] = reg_position;
}
fci->saved_regs[PC_REGNUM] = fci->frame + SIGFRAME_PC_OFF;
return;
}
- proc_desc = fci->proc_desc;
+ proc_desc = fci->extra_info->proc_desc;
if (proc_desc == NULL)
/* I'm not sure how/whether this can happen. Normally when we can't
find a proc_desc, we "synthesize" one using heuristic_proc_desc
and set the saved_regs right away. */
return;
- kernel_trap = PROC_REG_MASK(proc_desc) & 1;
- gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK(proc_desc);
- float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK(proc_desc);
+ kernel_trap = PROC_REG_MASK (proc_desc) & 1;
+ gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc);
+ float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc);
- if (/* In any frame other than the innermost or a frame interrupted by
- a signal, we assume that all registers have been saved.
- This assumes that all register saves in a function happen before
- the first function call. */
- (fci->next == NULL || fci->next->signal_handler_caller)
+ if ( /* In any frame other than the innermost or a frame interrupted by
+ a signal, we assume that all registers have been saved.
+ This assumes that all register saves in a function happen before
+ the first function call. */
+ (fci->next == NULL || fci->next->signal_handler_caller)
- /* In a dummy frame we know exactly where things are saved. */
- && !PROC_DESC_IS_DUMMY (proc_desc)
+ /* In a dummy frame we know exactly where things are saved. */
+ && !PROC_DESC_IS_DUMMY (proc_desc)
- /* Don't bother unless we are inside a function prologue. Outside the
- prologue, we know where everything is. */
+ /* Don't bother unless we are inside a function prologue. Outside the
+ prologue, we know where everything is. */
- && in_prologue (fci->pc, PROC_LOW_ADDR (proc_desc))
+ && in_prologue (fci->pc, PROC_LOW_ADDR (proc_desc))
- /* Not sure exactly what kernel_trap means, but if it means
- the kernel saves the registers without a prologue doing it,
- we better not examine the prologue to see whether registers
- have been saved yet. */
- && !kernel_trap)
+ /* Not sure exactly what kernel_trap means, but if it means
+ the kernel saves the registers without a prologue doing it,
+ we better not examine the prologue to see whether registers
+ have been saved yet. */
+ && !kernel_trap)
{
/* We need to figure out whether the registers that the proc_desc
- claims are saved have been saved yet. */
+ claims are saved have been saved yet. */
CORE_ADDR addr;
/* Fill in the offsets for the registers which gen_mask says
were saved. */
reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
- for (ireg= MIPS_NUMREGS-1; gen_mask; --ireg, gen_mask <<= 1)
+ for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1)
if (gen_mask & 0x80000000)
{
fci->saved_regs[ireg] = reg_position;
- reg_position -= MIPS_REGSIZE;
- /* start-sanitize-r5900 */
-#ifdef R5900_128BIT_GPR_HACK
- /* Gross. The r5900 has 128bit wide registers, but MIPS_REGSIZE is
- still 64bits. See the comments in tm.h for a discussion of the
- various problems this causes. */
- if (ireg <= RA_REGNUM)
- reg_position -= MIPS_REGSIZE;
-#endif
- /* end-sanitize-r5900 */
+ reg_position -= MIPS_SAVED_REGSIZE;
}
/* The MIPS16 entry instruction saves $s0 and $s1 in the reverse order
if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
{
inst = mips_fetch_instruction (PROC_LOW_ADDR (proc_desc));
- if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
{
int reg;
int sreg_count = (inst >> 6) & 3;
-
+
/* Check if the ra register was pushed on the stack. */
reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
if (inst & 0x20)
- reg_position -= MIPS_REGSIZE;
+ reg_position -= MIPS_SAVED_REGSIZE;
/* Check if the s0 and s1 registers were pushed on the stack. */
- for (reg = 16; reg < sreg_count+16; reg++)
+ for (reg = 16; reg < sreg_count + 16; reg++)
{
fci->saved_regs[reg] = reg_position;
- reg_position -= MIPS_REGSIZE;
+ reg_position -= MIPS_SAVED_REGSIZE;
}
}
}
/* The freg_offset points to where the first *double* register
is saved. So skip to the high-order word. */
- if (! GDB_TARGET_IS_MIPS64)
- reg_position += MIPS_REGSIZE;
+ if (!GDB_TARGET_IS_MIPS64)
+ reg_position += MIPS_SAVED_REGSIZE;
/* Fill in the offsets for the float registers which float_mask says
were saved. */
- for (ireg = MIPS_NUMREGS-1; float_mask; --ireg, float_mask <<= 1)
+ for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1)
if (float_mask & 0x80000000)
{
- fci->saved_regs[FP0_REGNUM+ireg] = reg_position;
- reg_position -= MIPS_REGSIZE;
+ fci->saved_regs[FP0_REGNUM + ireg] = reg_position;
+ reg_position -= MIPS_SAVED_REGSIZE;
}
fci->saved_regs[PC_REGNUM] = fci->saved_regs[RA_REGNUM];
}
static CORE_ADDR
-read_next_frame_reg(fi, regno)
- struct frame_info *fi;
- int regno;
+read_next_frame_reg (struct frame_info *fi, int regno)
{
for (; fi; fi = fi->next)
{
/* We have to get the saved sp from the sigcontext
- if it is a signal handler frame. */
+ if it is a signal handler frame. */
if (regno == SP_REGNUM && !fi->signal_handler_caller)
return fi->frame;
else
if (fi->saved_regs == NULL)
mips_find_saved_regs (fi);
if (fi->saved_regs[regno])
- return read_memory_integer(fi->saved_regs[regno], MIPS_REGSIZE);
+ return read_memory_integer (ADDR_BITS_REMOVE (fi->saved_regs[regno]), MIPS_SAVED_REGSIZE);
}
}
- return read_register (regno);
+ return read_signed_register (regno);
}
/* mips_addr_bits_remove - remove useless address bits */
-CORE_ADDR
-mips_addr_bits_remove (addr)
- CORE_ADDR addr;
-{
-#if GDB_TARGET_IS_MIPS64
- if (mask_address_p && (addr >> 32 == (CORE_ADDR)0xffffffff))
- {
- /* This hack is a work-around for existing boards using PMON,
- the simulator, and any other 64-bit targets that doesn't have
- true 64-bit addressing. On these targets, the upper 32 bits
- of addresses are ignored by the hardware. Thus, the PC or SP
- are likely to have been sign extended to all 1s by instruction
- sequences that load 32-bit addresses. For example, a typical
- piece of code that loads an address is this:
- lui $r2, <upper 16 bits>
- ori $r2, <lower 16 bits>
- But the lui sign-extends the value such that the upper 32 bits
- may be all 1s. The workaround is simply to mask off these bits.
- In the future, gcc may be changed to support true 64-bit
- addressing, and this masking will have to be disabled. */
- addr &= (CORE_ADDR)0xffffffff;
- }
-#else
- /* Even when GDB is configured for some 32-bit targets (e.g. mips-elf),
- BFD is configured to handle 64-bit targets, so CORE_ADDR is 64 bits.
- So we still have to mask off useless bits from addresses. */
- addr &= (CORE_ADDR)0xffffffff;
-#endif
-
+static CORE_ADDR
+mips_addr_bits_remove (CORE_ADDR addr)
+{
+ if (GDB_TARGET_IS_MIPS64)
+ {
+ if (mips_mask_address_p () && (addr >> 32 == (CORE_ADDR) 0xffffffff))
+ {
+ /* This hack is a work-around for existing boards using
+ PMON, the simulator, and any other 64-bit targets that
+ doesn't have true 64-bit addressing. On these targets,
+ the upper 32 bits of addresses are ignored by the
+ hardware. Thus, the PC or SP are likely to have been
+ sign extended to all 1s by instruction sequences that
+ load 32-bit addresses. For example, a typical piece of
+ code that loads an address is this:
+ lui $r2, <upper 16 bits>
+ ori $r2, <lower 16 bits>
+ But the lui sign-extends the value such that the upper 32
+ bits may be all 1s. The workaround is simply to mask off
+ these bits. In the future, gcc may be changed to support
+ true 64-bit addressing, and this masking will have to be
+ disabled. */
+ addr &= (CORE_ADDR) 0xffffffff;
+ }
+ }
+ else if (mips_mask_address_p ())
+ {
+ /* FIXME: This is wrong! mips_addr_bits_remove() shouldn't be
+ masking off bits, instead, the actual target should be asking
+ for the address to be converted to a valid pointer. */
+ /* Even when GDB is configured for some 32-bit targets
+ (e.g. mips-elf), BFD is configured to handle 64-bit targets,
+ so CORE_ADDR is 64 bits. So we still have to mask off
+ useless bits from addresses. */
+ addr &= (CORE_ADDR) 0xffffffff;
+ }
return addr;
}
+/* mips_software_single_step() is called just before we want to resume
+ the inferior, if we want to single-step it but there is no hardware
+ or kernel single-step support (MIPS on Linux for example). We find
+ the target of the coming instruction and breakpoint it.
+
+ single_step is also called just after the inferior stops. If we had
+ set up a simulated single-step, we undo our damage. */
+
void
-mips_init_frame_pc_first (fromleaf, prev)
- int fromleaf;
- struct frame_info *prev;
+mips_software_single_step (enum target_signal sig, int insert_breakpoints_p)
+{
+ static CORE_ADDR next_pc;
+ typedef char binsn_quantum[BREAKPOINT_MAX];
+ static binsn_quantum break_mem;
+ CORE_ADDR pc;
+
+ if (insert_breakpoints_p)
+ {
+ pc = read_register (PC_REGNUM);
+ next_pc = mips_next_pc (pc);
+
+ target_insert_breakpoint (next_pc, break_mem);
+ }
+ else
+ target_remove_breakpoint (next_pc, break_mem);
+}
+
+static void
+mips_init_frame_pc_first (int fromleaf, struct frame_info *prev)
{
CORE_ADDR pc, tmp;
pc = ((fromleaf) ? SAVED_PC_AFTER_CALL (prev->next) :
- prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
+ prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
tmp = mips_skip_stub (pc);
- prev->pc = tmp ? tmp : pc;
+ prev->pc = tmp ? tmp : pc;
}
CORE_ADDR
-mips_frame_saved_pc(frame)
- struct frame_info *frame;
+mips_frame_saved_pc (struct frame_info *frame)
{
CORE_ADDR saved_pc;
- mips_extra_func_info_t proc_desc = frame->proc_desc;
+ mips_extra_func_info_t proc_desc = frame->extra_info->proc_desc;
/* We have to get the saved pc from the sigcontext
if it is a signal handler frame. */
int pcreg = frame->signal_handler_caller ? PC_REGNUM
- : (proc_desc ? PROC_PC_REG(proc_desc) : RA_REGNUM);
+ : (proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM);
- if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
- saved_pc = read_memory_integer(frame->frame - MIPS_REGSIZE, MIPS_REGSIZE);
+ if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
+ saved_pc = read_memory_integer (frame->frame - MIPS_SAVED_REGSIZE, MIPS_SAVED_REGSIZE);
else
- saved_pc = read_next_frame_reg(frame, pcreg);
+ saved_pc = read_next_frame_reg (frame, pcreg);
return ADDR_BITS_REMOVE (saved_pc);
}
static struct mips_extra_func_info temp_proc_desc;
-static struct frame_saved_regs temp_saved_regs;
+static CORE_ADDR temp_saved_regs[NUM_REGS];
/* Set a register's saved stack address in temp_saved_regs. If an address
has already been set for this register, do nothing; this way we will
This is a helper function for mips{16,32}_heuristic_proc_desc. */
static void
-set_reg_offset (regno, offset)
- int regno;
- CORE_ADDR offset;
+set_reg_offset (int regno, CORE_ADDR offset)
{
- if (temp_saved_regs.regs[regno] == 0)
- temp_saved_regs.regs[regno] = offset;
+ if (temp_saved_regs[regno] == 0)
+ temp_saved_regs[regno] = offset;
}
/* Test whether the PC points to the return instruction at the
end of a function. */
-static int
-mips_about_to_return (pc)
- CORE_ADDR pc;
+static int
+mips_about_to_return (CORE_ADDR pc)
{
if (pc_is_mips16 (pc))
/* This mips16 case isn't necessarily reliable. Sometimes the compiler
lines. */
static CORE_ADDR
-heuristic_proc_start (pc)
- CORE_ADDR pc;
+heuristic_proc_start (CORE_ADDR pc)
{
- CORE_ADDR start_pc;
- CORE_ADDR fence;
- int instlen;
- int seen_adjsp = 0;
+ CORE_ADDR start_pc;
+ CORE_ADDR fence;
+ int instlen;
+ int seen_adjsp = 0;
- pc = ADDR_BITS_REMOVE (pc);
- start_pc = pc;
- fence = start_pc - heuristic_fence_post;
- if (start_pc == 0) return 0;
+ pc = ADDR_BITS_REMOVE (pc);
+ start_pc = pc;
+ fence = start_pc - heuristic_fence_post;
+ if (start_pc == 0)
+ return 0;
- if (heuristic_fence_post == UINT_MAX
- || fence < VM_MIN_ADDRESS)
- fence = VM_MIN_ADDRESS;
+ if (heuristic_fence_post == UINT_MAX
+ || fence < VM_MIN_ADDRESS)
+ fence = VM_MIN_ADDRESS;
- instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+ instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
- /* search back for previous return */
- for (start_pc -= instlen; ; start_pc -= instlen)
- if (start_pc < fence)
+ /* search back for previous return */
+ for (start_pc -= instlen;; start_pc -= instlen)
+ if (start_pc < fence)
+ {
+ /* It's not clear to me why we reach this point when
+ stop_soon_quietly, but with this test, at least we
+ don't print out warnings for every child forked (eg, on
+ decstation). 22apr93 rich@cygnus.com. */
+ if (!stop_soon_quietly)
{
- /* It's not clear to me why we reach this point when
- stop_soon_quietly, but with this test, at least we
- don't print out warnings for every child forked (eg, on
- decstation). 22apr93 rich@cygnus.com. */
- if (!stop_soon_quietly)
- {
- static int blurb_printed = 0;
+ static int blurb_printed = 0;
- if (fence == VM_MIN_ADDRESS)
- warning("Hit beginning of text section without finding");
- else
- warning("Hit heuristic-fence-post without finding");
-
- warning("enclosing function for address 0x%s", paddr_nz (pc));
- if (!blurb_printed)
- {
- printf_filtered ("\
-This warning occurs if you are debugging a function without any symbols\n\
-(for example, in a stripped executable). In that case, you may wish to\n\
-increase the size of the search with the `set heuristic-fence-post' command.\n\
-\n\
-Otherwise, you told GDB there was a function where there isn't one, or\n\
-(more likely) you have encountered a bug in GDB.\n");
- blurb_printed = 1;
- }
- }
+ warning ("Warning: GDB can't find the start of the function at 0x%s.",
+ paddr_nz (pc));
- return 0;
- }
- else if (pc_is_mips16 (start_pc))
- {
- unsigned short inst;
-
- /* On MIPS16, any one of the following is likely to be the
- start of a function:
- entry
- addiu sp,-n
- daddiu sp,-n
- extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */
- inst = mips_fetch_instruction (start_pc);
- if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
- || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
- || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
- || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
- break;
- else if ((inst & 0xff00) == 0x6300 /* addiu sp */
- || (inst & 0xff00) == 0xfb00) /* daddiu sp */
- seen_adjsp = 1;
- else
- seen_adjsp = 0;
- }
- else if (mips_about_to_return (start_pc))
- {
- start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
- break;
+ if (!blurb_printed)
+ {
+ /* This actually happens frequently in embedded
+ development, when you first connect to a board
+ and your stack pointer and pc are nowhere in
+ particular. This message needs to give people
+ in that situation enough information to
+ determine that it's no big deal. */
+ printf_filtered ("\n\
+ GDB is unable to find the start of the function at 0x%s\n\
+and thus can't determine the size of that function's stack frame.\n\
+This means that GDB may be unable to access that stack frame, or\n\
+the frames below it.\n\
+ This problem is most likely caused by an invalid program counter or\n\
+stack pointer.\n\
+ However, if you think GDB should simply search farther back\n\
+from 0x%s for code which looks like the beginning of a\n\
+function, you can increase the range of the search using the `set\n\
+heuristic-fence-post' command.\n",
+ paddr_nz (pc), paddr_nz (pc));
+ blurb_printed = 1;
+ }
}
-#if 0
- /* skip nops (usually 1) 0 - is this */
- while (start_pc < pc && read_memory_integer (start_pc, MIPS_INSTLEN) == 0)
- start_pc += MIPS_INSTLEN;
-#endif
- return start_pc;
+ return 0;
+ }
+ else if (pc_is_mips16 (start_pc))
+ {
+ unsigned short inst;
+
+ /* On MIPS16, any one of the following is likely to be the
+ start of a function:
+ entry
+ addiu sp,-n
+ daddiu sp,-n
+ extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */
+ inst = mips_fetch_instruction (start_pc);
+ if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ || (inst & 0xff80) == 0x6380 /* addiu sp,-n */
+ || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */
+ || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */
+ break;
+ else if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ || (inst & 0xff00) == 0xfb00) /* daddiu sp */
+ seen_adjsp = 1;
+ else
+ seen_adjsp = 0;
+ }
+ else if (mips_about_to_return (start_pc))
+ {
+ start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
+ break;
+ }
+
+ return start_pc;
}
/* Fetch the immediate value from a MIPS16 instruction.
for mips16_heuristic_proc_desc. */
static int
-mips16_get_imm (prev_inst, inst, nbits, scale, is_signed)
- unsigned short prev_inst; /* previous instruction */
- unsigned short inst; /* current instruction */
- int nbits; /* number of bits in imm field */
- int scale; /* scale factor to be applied to imm */
- int is_signed; /* is the imm field signed? */
+mips16_get_imm (unsigned short prev_inst, /* previous instruction */
+ unsigned short inst, /* current instruction */
+ int nbits, /* number of bits in imm field */
+ int scale, /* scale factor to be applied to imm */
+ int is_signed) /* is the imm field signed? */
{
int offset;
if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */
{
offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0);
- if (offset & 0x8000) /* check for negative extend */
+ if (offset & 0x8000) /* check for negative extend */
offset = 0 - (0x10000 - (offset & 0xffff));
return offset | (inst & 0x1f);
}
stream from start_pc to limit_pc. */
static void
-mips16_heuristic_proc_desc(start_pc, limit_pc, next_frame, sp)
- CORE_ADDR start_pc, limit_pc;
- struct frame_info *next_frame;
- CORE_ADDR sp;
+mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *next_frame, CORE_ADDR sp)
{
CORE_ADDR cur_pc;
CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */
unsigned entry_inst = 0; /* the entry instruction */
int reg, offset;
- PROC_FRAME_OFFSET(&temp_proc_desc) = 0; /* size of stack frame */
- PROC_FRAME_ADJUST(&temp_proc_desc) = 0; /* offset of FP from SP */
+ PROC_FRAME_OFFSET (&temp_proc_desc) = 0; /* size of stack frame */
+ PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN)
{
/* Fetch and decode the instruction. */
inst = (unsigned short) mips_fetch_instruction (cur_pc);
- if ((inst & 0xff00) == 0x6300 /* addiu sp */
+ if ((inst & 0xff00) == 0x6300 /* addiu sp */
|| (inst & 0xff00) == 0xfb00) /* daddiu sp */
{
offset = mips16_get_imm (prev_inst, inst, 8, 8, 1);
- if (offset < 0) /* negative stack adjustment? */
- PROC_FRAME_OFFSET(&temp_proc_desc) -= offset;
+ if (offset < 0) /* negative stack adjustment? */
+ PROC_FRAME_OFFSET (&temp_proc_desc) -= offset;
else
/* Exit loop if a positive stack adjustment is found, which
usually means that the stack cleanup code in the function
{
offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
reg = mips16_to_32_reg[(inst & 0x700) >> 8];
- PROC_REG_MASK(&temp_proc_desc) |= (1 << reg);
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
set_reg_offset (reg, sp + offset);
}
else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK(&temp_proc_desc) |= (1 << reg);
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << reg);
set_reg_offset (reg, sp + offset);
}
else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
- PROC_REG_MASK(&temp_proc_desc) |= (1 << RA_REGNUM);
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
set_reg_offset (RA_REGNUM, sp + offset);
}
else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */
{
offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
- PROC_REG_MASK(&temp_proc_desc) |= (1 << RA_REGNUM);
+ PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM);
set_reg_offset (RA_REGNUM, sp + offset);
}
- else if (inst == 0x673d) /* move $s1, $sp */
+ else if (inst == 0x673d) /* move $s1, $sp */
{
frame_addr = sp;
PROC_FRAME_REG (&temp_proc_desc) = 17;
{
offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
set_reg_offset (reg, frame_addr + offset);
}
else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */
{
offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
set_reg_offset (reg, frame_addr + offset);
}
- else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
- entry_inst = inst; /* save for later processing */
+ else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+ entry_inst = inst; /* save for later processing */
else if ((inst & 0xf800) == 0x1800) /* jal(x) */
- cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */
+ cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */
}
- /* The entry instruction is typically the first instruction in a function,
- and it stores registers at offsets relative to the value of the old SP
- (before the prologue). But the value of the sp parameter to this
- function is the new SP (after the prologue has been executed). So we
- can't calculate those offsets until we've seen the entire prologue,
- and can calculate what the old SP must have been. */
- if (entry_inst != 0)
- {
- int areg_count = (entry_inst >> 8) & 7;
- int sreg_count = (entry_inst >> 6) & 3;
+ /* The entry instruction is typically the first instruction in a function,
+ and it stores registers at offsets relative to the value of the old SP
+ (before the prologue). But the value of the sp parameter to this
+ function is the new SP (after the prologue has been executed). So we
+ can't calculate those offsets until we've seen the entire prologue,
+ and can calculate what the old SP must have been. */
+ if (entry_inst != 0)
+ {
+ int areg_count = (entry_inst >> 8) & 7;
+ int sreg_count = (entry_inst >> 6) & 3;
- /* The entry instruction always subtracts 32 from the SP. */
- PROC_FRAME_OFFSET(&temp_proc_desc) += 32;
+ /* The entry instruction always subtracts 32 from the SP. */
+ PROC_FRAME_OFFSET (&temp_proc_desc) += 32;
- /* Now we can calculate what the SP must have been at the
- start of the function prologue. */
- sp += PROC_FRAME_OFFSET(&temp_proc_desc);
+ /* Now we can calculate what the SP must have been at the
+ start of the function prologue. */
+ sp += PROC_FRAME_OFFSET (&temp_proc_desc);
- /* Check if a0-a3 were saved in the caller's argument save area. */
- for (reg = 4, offset = 0; reg < areg_count+4; reg++)
- {
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + offset);
- offset += MIPS_REGSIZE;
- }
+ /* Check if a0-a3 were saved in the caller's argument save area. */
+ for (reg = 4, offset = 0; reg < areg_count + 4; reg++)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + offset);
+ offset += MIPS_SAVED_REGSIZE;
+ }
- /* Check if the ra register was pushed on the stack. */
- offset = -4;
- if (entry_inst & 0x20)
- {
- PROC_REG_MASK(&temp_proc_desc) |= 1 << RA_REGNUM;
- set_reg_offset (RA_REGNUM, sp + offset);
- offset -= MIPS_REGSIZE;
- }
+ /* Check if the ra register was pushed on the stack. */
+ offset = -4;
+ if (entry_inst & 0x20)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM;
+ set_reg_offset (RA_REGNUM, sp + offset);
+ offset -= MIPS_SAVED_REGSIZE;
+ }
- /* Check if the s0 and s1 registers were pushed on the stack. */
- for (reg = 16; reg < sreg_count+16; reg++)
- {
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + offset);
- offset -= MIPS_REGSIZE;
- }
- }
+ /* Check if the s0 and s1 registers were pushed on the stack. */
+ for (reg = 16; reg < sreg_count + 16; reg++)
+ {
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
+ set_reg_offset (reg, sp + offset);
+ offset -= MIPS_SAVED_REGSIZE;
+ }
+ }
}
static void
-mips32_heuristic_proc_desc(start_pc, limit_pc, next_frame, sp)
- CORE_ADDR start_pc, limit_pc;
- struct frame_info *next_frame;
- CORE_ADDR sp;
+mips32_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *next_frame, CORE_ADDR sp)
{
CORE_ADDR cur_pc;
- CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
+ CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
restart:
- memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
- PROC_FRAME_OFFSET(&temp_proc_desc) = 0;
+ memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
+ PROC_FRAME_OFFSET (&temp_proc_desc) = 0;
PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */
for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN)
{
low_word = inst & 0xffff;
reg = high_word & 0x1f;
- if (high_word == 0x27bd /* addiu $sp,$sp,-i */
+ if (high_word == 0x27bd /* addiu $sp,$sp,-i */
|| high_word == 0x23bd /* addi $sp,$sp,-i */
|| high_word == 0x67bd) /* daddiu $sp,$sp,-i */
{
if (low_word & 0x8000) /* negative stack adjustment? */
- PROC_FRAME_OFFSET(&temp_proc_desc) += 0x10000 - low_word;
+ PROC_FRAME_OFFSET (&temp_proc_desc) += 0x10000 - low_word;
else
/* Exit loop if a positive stack adjustment is found, which
usually means that the stack cleanup code in the function
}
else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */
{
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
set_reg_offset (reg, sp + low_word);
}
else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */
/* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra,
but the register size used is only 32 bits. Make the address
for the saved register point to the lower 32 bits. */
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
set_reg_offset (reg, sp + low_word + 8 - MIPS_REGSIZE);
}
- /* start-sanitize-r5900 */
- else if ((high_word & 0xFFE0) == 0x7fa0) /* sq reg,offset($sp) */
- {
- /* I don't think we have to worry about the Irix 6.2 N32 ABI
- issue noted int he sd reg, offset($sp) case above. */
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
- set_reg_offset (reg, sp + low_word);
- }
- /* end-sanitize-r5900 */
- else if (high_word == 0x27be) /* addiu $30,$sp,size */
+ else if (high_word == 0x27be) /* addiu $30,$sp,size */
{
/* Old gcc frame, r30 is virtual frame pointer. */
- if ((long)low_word != PROC_FRAME_OFFSET(&temp_proc_desc))
- frame_addr = sp + low_word;
+ if ((long) low_word != PROC_FRAME_OFFSET (&temp_proc_desc))
+ frame_addr = sp + low_word;
else if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
{
unsigned alloca_adjust;
PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg(next_frame, 30);
- alloca_adjust = (unsigned)(frame_addr - (sp + low_word));
+ frame_addr = read_next_frame_reg (next_frame, 30);
+ alloca_adjust = (unsigned) (frame_addr - (sp + low_word));
if (alloca_adjust > 0)
{
/* FP > SP + frame_size. This may be because
}
}
}
- /* move $30,$sp. With different versions of gas this will be either
- `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
- Accept any one of these. */
+ /* move $30,$sp. With different versions of gas this will be either
+ `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
+ Accept any one of these. */
else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
{
/* New gcc frame, virtual frame pointer is at r30 + frame_size. */
{
unsigned alloca_adjust;
PROC_FRAME_REG (&temp_proc_desc) = 30;
- frame_addr = read_next_frame_reg(next_frame, 30);
- alloca_adjust = (unsigned)(frame_addr - sp);
+ frame_addr = read_next_frame_reg (next_frame, 30);
+ alloca_adjust = (unsigned) (frame_addr - sp);
if (alloca_adjust > 0)
{
/* FP > SP + frame_size. This may be because
}
}
}
- else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
+ else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */
{
- PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+ PROC_REG_MASK (&temp_proc_desc) |= 1 << reg;
set_reg_offset (reg, frame_addr + low_word);
}
}
}
static mips_extra_func_info_t
-heuristic_proc_desc(start_pc, limit_pc, next_frame)
- CORE_ADDR start_pc, limit_pc;
- struct frame_info *next_frame;
+heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct frame_info *next_frame, int cur_frame)
{
- CORE_ADDR sp = read_next_frame_reg (next_frame, SP_REGNUM);
+ CORE_ADDR sp;
+
+ if (cur_frame)
+ sp = read_next_frame_reg (next_frame, SP_REGNUM);
+ else
+ sp = 0;
- if (start_pc == 0) return NULL;
- memset (&temp_proc_desc, '\0', sizeof(temp_proc_desc));
- memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
+ if (start_pc == 0)
+ return NULL;
+ memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc));
+ memset (&temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
PROC_FRAME_REG (&temp_proc_desc) = SP_REGNUM;
PROC_PC_REG (&temp_proc_desc) = RA_REGNUM;
}
static mips_extra_func_info_t
-non_heuristic_proc_desc (pc, addrptr)
- CORE_ADDR pc;
- CORE_ADDR *addrptr;
+non_heuristic_proc_desc (CORE_ADDR pc, CORE_ADDR *addrptr)
{
CORE_ADDR startaddr;
mips_extra_func_info_t proc_desc;
- struct block *b = block_for_pc(pc);
+ struct block *b = block_for_pc (pc);
struct symbol *sym;
find_pc_partial_function (pc, NULL, &startaddr, NULL);
static mips_extra_func_info_t
-find_proc_desc (pc, next_frame)
- CORE_ADDR pc;
- struct frame_info *next_frame;
+find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame)
{
mips_extra_func_info_t proc_desc;
CORE_ADDR startaddr;
{
struct symtab_and_line val;
struct symbol *proc_symbol =
- PROC_DESC_IS_DUMMY(proc_desc) ? 0 : PROC_SYMBOL(proc_desc);
+ PROC_DESC_IS_DUMMY (proc_desc) ? 0 : PROC_SYMBOL (proc_desc);
if (proc_symbol)
{
val = find_pc_line (BLOCK_START
- (SYMBOL_BLOCK_VALUE(proc_symbol)),
+ (SYMBOL_BLOCK_VALUE (proc_symbol)),
0);
val.pc = val.end ? val.end : pc;
}
if (!proc_symbol || pc < val.pc)
{
mips_extra_func_info_t found_heuristic =
- heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
- pc, next_frame);
+ heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
+ pc, next_frame, cur_frame);
if (found_heuristic)
proc_desc = found_heuristic;
}
else
{
/* Is linked_proc_desc_table really necessary? It only seems to be used
- by procedure call dummys. However, the procedures being called ought
- to have their own proc_descs, and even if they don't,
- heuristic_proc_desc knows how to create them! */
+ by procedure call dummys. However, the procedures being called ought
+ to have their own proc_descs, and even if they don't,
+ heuristic_proc_desc knows how to create them! */
register struct linked_proc_info *link;
for (link = linked_proc_desc_table; link; link = link->next)
- if (PROC_LOW_ADDR(&link->info) <= pc
- && PROC_HIGH_ADDR(&link->info) > pc)
+ if (PROC_LOW_ADDR (&link->info) <= pc
+ && PROC_HIGH_ADDR (&link->info) > pc)
return &link->info;
if (startaddr == 0)
startaddr = heuristic_proc_start (pc);
proc_desc =
- heuristic_proc_desc (startaddr, pc, next_frame);
+ heuristic_proc_desc (startaddr, pc, next_frame, cur_frame);
}
return proc_desc;
}
static CORE_ADDR
-get_frame_pointer(frame, proc_desc)
- struct frame_info *frame;
- mips_extra_func_info_t proc_desc;
+get_frame_pointer (struct frame_info *frame,
+ mips_extra_func_info_t proc_desc)
{
return ADDR_BITS_REMOVE (
- read_next_frame_reg (frame, PROC_FRAME_REG (proc_desc)) +
- PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
+ read_next_frame_reg (frame, PROC_FRAME_REG (proc_desc)) +
+ PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
}
mips_extra_func_info_t cached_proc_desc;
CORE_ADDR
-mips_frame_chain(frame)
- struct frame_info *frame;
+mips_frame_chain (struct frame_info *frame)
{
mips_extra_func_info_t proc_desc;
CORE_ADDR tmp;
- CORE_ADDR saved_pc = FRAME_SAVED_PC(frame);
+ CORE_ADDR saved_pc = FRAME_SAVED_PC (frame);
if (saved_pc == 0 || inside_entry_file (saved_pc))
return 0;
saved_pc = tmp;
/* Look up the procedure descriptor for this PC. */
- proc_desc = find_proc_desc(saved_pc, frame);
+ proc_desc = find_proc_desc (saved_pc, frame, 1);
if (!proc_desc)
return 0;
we loop forever if we see a zero size frame. */
if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
&& PROC_FRAME_OFFSET (proc_desc) == 0
- /* The previous frame from a sigtramp frame might be frameless
- and have frame size zero. */
+ /* The previous frame from a sigtramp frame might be frameless
+ and have frame size zero. */
&& !frame->signal_handler_caller)
return 0;
else
}
void
-init_extra_frame_info(fci)
- struct frame_info *fci;
+mips_init_extra_frame_info (int fromleaf, struct frame_info *fci)
{
int regnum;
/* Use proc_desc calculated in frame_chain */
mips_extra_func_info_t proc_desc =
- fci->next ? cached_proc_desc : find_proc_desc(fci->pc, fci->next);
+ fci->next ? cached_proc_desc : find_proc_desc (fci->pc, fci->next, 1);
+
+ fci->extra_info = (struct frame_extra_info *)
+ frame_obstack_alloc (sizeof (struct frame_extra_info));
fci->saved_regs = NULL;
- fci->proc_desc =
+ fci->extra_info->proc_desc =
proc_desc == &temp_proc_desc ? 0 : proc_desc;
if (proc_desc)
{
/* Fixup frame-pointer - only needed for top frame */
/* This may not be quite right, if proc has a real frame register.
- Get the value of the frame relative sp, procedure might have been
- interrupted by a signal at it's very start. */
+ Get the value of the frame relative sp, procedure might have been
+ interrupted by a signal at it's very start. */
if (fci->pc == PROC_LOW_ADDR (proc_desc)
&& !PROC_DESC_IS_DUMMY (proc_desc))
fci->frame = read_next_frame_reg (fci->next, SP_REGNUM);
mips_find_saved_registers will do that for us.
We can't use fci->signal_handler_caller, it is not yet set. */
find_pc_partial_function (fci->pc, &name,
- (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+ (CORE_ADDR *) NULL, (CORE_ADDR *) NULL);
if (!IN_SIGTRAMP (fci->pc, name))
{
- fci->saved_regs = (CORE_ADDR*)
- frame_obstack_alloc (SIZEOF_FRAME_SAVED_REGS);
- memcpy (fci->saved_regs, temp_saved_regs.regs, SIZEOF_FRAME_SAVED_REGS);
+ frame_saved_regs_zalloc (fci);
+ memcpy (fci->saved_regs, temp_saved_regs, SIZEOF_FRAME_SAVED_REGS);
fci->saved_regs[PC_REGNUM]
= fci->saved_regs[RA_REGNUM];
}
}
/* hack: if argument regs are saved, guess these contain args */
- fci->num_args = -1; /* assume we can't tell how many args for now */
+ /* assume we can't tell how many args for now */
+ fci->extra_info->num_args = -1;
for (regnum = MIPS_LAST_ARG_REGNUM; regnum >= A0_REGNUM; regnum--)
{
- if (PROC_REG_MASK(proc_desc) & (1 << regnum))
+ if (PROC_REG_MASK (proc_desc) & (1 << regnum))
{
- fci->num_args = regnum - A0_REGNUM + 1;
+ fci->extra_info->num_args = regnum - A0_REGNUM + 1;
break;
}
- }
+ }
}
}
arguments without difficulty. */
struct frame_info *
-setup_arbitrary_frame (argc, argv)
- int argc;
- CORE_ADDR *argv;
+setup_arbitrary_frame (int argc, CORE_ADDR *argv)
{
if (argc != 2)
error ("MIPS frame specifications require two arguments: sp and pc");
return create_new_frame (argv[0], argv[1]);
}
-/*
- * STACK_ARGSIZE -- how many bytes does a pushed function arg take up on the stack?
- *
- * For n32 ABI, eight.
- * For all others, he same as the size of a general register.
- */
-#if defined (_MIPS_SIM_NABI32) && _MIPS_SIM == _MIPS_SIM_NABI32
-#define MIPS_NABI32 1
-#define STACK_ARGSIZE 8
-#else
-#define MIPS_NABI32 0
-#define STACK_ARGSIZE MIPS_REGSIZE
-#endif
+/* According to the current ABI, should the type be passed in a
+ floating-point register (assuming that there is space)? When there
+ is no FPU, FP are not even considered as possibile candidates for
+ FP registers and, consequently this returns false - forces FP
+ arguments into integer registers. */
+
+static int
+fp_register_arg_p (enum type_code typecode, struct type *arg_type)
+{
+ return ((typecode == TYPE_CODE_FLT
+ || (MIPS_EABI
+ && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)
+ && TYPE_NFIELDS (arg_type) == 1
+ && TYPE_CODE (TYPE_FIELD_TYPE (arg_type, 0)) == TYPE_CODE_FLT))
+ && MIPS_FPU_TYPE != MIPS_FPU_NONE);
+}
+
+/* On o32, argument passing in GPRs depends on the alignment of the type being
+ passed. Return 1 if this type must be aligned to a doubleword boundary. */
+
+static int
+mips_type_needs_double_align (struct type *type)
+{
+ enum type_code typecode = TYPE_CODE (type);
+
+ if (typecode == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8)
+ return 1;
+ else if (typecode == TYPE_CODE_STRUCT)
+ {
+ if (TYPE_NFIELDS (type) < 1)
+ return 0;
+ return mips_type_needs_double_align (TYPE_FIELD_TYPE (type, 0));
+ }
+ else if (typecode == TYPE_CODE_UNION)
+ {
+ int i, n;
+
+ n = TYPE_NFIELDS (type);
+ for (i = 0; i < n; i++)
+ if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i)))
+ return 1;
+ return 0;
+ }
+ return 0;
+}
CORE_ADDR
-mips_push_arguments(nargs, args, sp, struct_return, struct_addr)
- int nargs;
- value_ptr *args;
- CORE_ADDR sp;
- int struct_return;
- CORE_ADDR struct_addr;
+mips_push_arguments (int nargs,
+ struct value **args,
+ CORE_ADDR sp,
+ int struct_return,
+ CORE_ADDR struct_addr)
{
int argreg;
int float_argreg;
a power of two. */
#define ROUND_DOWN(n,a) ((n) & ~((a)-1))
#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1))
-
+
/* First ensure that the stack and structure return address (if any)
are properly aligned. The stack has to be at least 64-bit aligned
even on 32-bit machines, because doubles must be 64-bit aligned.
On at least one MIPS variant, stack frames need to be 128-bit
aligned, so we round to this widest known alignment. */
sp = ROUND_DOWN (sp, 16);
- struct_addr = ROUND_DOWN (struct_addr, MIPS_REGSIZE);
-
+ struct_addr = ROUND_DOWN (struct_addr, 16);
+
/* Now make space on the stack for the args. We allocate more
than necessary for EABI, because the first few arguments are
passed in registers, but that's OK. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ROUND_UP (TYPE_LENGTH(VALUE_TYPE(args[argnum])), MIPS_REGSIZE);
+ len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])), MIPS_STACK_ARGSIZE);
sp -= ROUND_UP (len, 16);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "mips_push_arguments: sp=0x%lx allocated %d\n",
+ (long) sp, ROUND_UP (len, 16));
+
/* Initialize the integer and float register pointers. */
argreg = A0_REGNUM;
float_argreg = FPA0_REGNUM;
/* the struct_return pointer occupies the first parameter-passing reg */
if (struct_return)
+ {
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_push_arguments: struct_return reg=%d 0x%lx\n",
+ argreg, (long) struct_addr);
write_register (argreg++, struct_addr);
+ if (MIPS_REGS_HAVE_HOME_P)
+ stack_offset += MIPS_STACK_ARGSIZE;
+ }
/* Now load as many as possible of the first arguments into
registers, and push the rest onto the stack. Loop thru args
{
char *val;
char valbuf[MAX_REGISTER_RAW_SIZE];
- value_ptr arg = args[argnum];
+ struct value *arg = args[argnum];
struct type *arg_type = check_typedef (VALUE_TYPE (arg));
int len = TYPE_LENGTH (arg_type);
enum type_code typecode = TYPE_CODE (arg_type);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_push_arguments: %d len=%d type=%d",
+ argnum + 1, len, (int) typecode);
+
/* The EABI passes structures that do not fit in a register by
- reference. In all other cases, pass the structure by value. */
- if (MIPS_EABI && len > MIPS_REGSIZE &&
- (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
+ reference. In all other cases, pass the structure by value. */
+ if (MIPS_EABI
+ && len > MIPS_SAVED_REGSIZE
+ && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
{
- store_address (valbuf, MIPS_REGSIZE, VALUE_ADDRESS (arg));
+ store_address (valbuf, MIPS_SAVED_REGSIZE, VALUE_ADDRESS (arg));
typecode = TYPE_CODE_PTR;
- len = MIPS_REGSIZE;
+ len = MIPS_SAVED_REGSIZE;
val = valbuf;
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " push");
}
else
- val = (char *)VALUE_CONTENTS (arg);
+ val = (char *) VALUE_CONTENTS (arg);
/* 32-bit ABIs always start floating point arguments in an
- even-numbered floating point register. */
- if (!FP_REGISTER_DOUBLE && typecode == TYPE_CODE_FLT
- && (float_argreg & 1))
- float_argreg++;
+ even-numbered floating point register. Round the FP register
+ up before the check to see if there are any FP registers
+ left. Non MIPS_EABI targets also pass the FP in the integer
+ registers so also round up normal registers. */
+ if (!FP_REGISTER_DOUBLE
+ && fp_register_arg_p (typecode, arg_type))
+ {
+ if ((float_argreg & 1))
+ float_argreg++;
+ }
/* Floating point arguments passed in registers have to be
treated specially. On 32-bit architectures, doubles
- are passed in register pairs; the even register gets
- the low word, and the odd register gets the high word.
- On non-EABI processors, the first two floating point arguments are
- also copied to general registers, because MIPS16 functions
- don't use float registers for arguments. This duplication of
- arguments in general registers can't hurt non-MIPS16 functions
- because those registers are normally skipped. */
- if (typecode == TYPE_CODE_FLT
- && float_argreg <= MIPS_LAST_FP_ARG_REGNUM
- && MIPS_FPU_TYPE != MIPS_FPU_NONE)
+ are passed in register pairs; the even register gets
+ the low word, and the odd register gets the high word.
+ On non-EABI processors, the first two floating point arguments are
+ also copied to general registers, because MIPS16 functions
+ don't use float registers for arguments. This duplication of
+ arguments in general registers can't hurt non-MIPS16 functions
+ because those registers are normally skipped. */
+ /* MIPS_EABI squeezes a struct that contains a single floating
+ point value into an FP register instead of pushing it onto the
+ stack. */
+ if (fp_register_arg_p (typecode, arg_type)
+ && float_argreg <= MIPS_LAST_FP_ARG_REGNUM)
{
if (!FP_REGISTER_DOUBLE && len == 8)
{
- int low_offset = TARGET_BYTE_ORDER == BIG_ENDIAN ? 4 : 0;
+ int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
unsigned long regval;
/* Write the low word of the double to the even register(s). */
- regval = extract_unsigned_integer (val+low_offset, 4);
+ regval = extract_unsigned_integer (val + low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
write_register (float_argreg++, regval);
if (!MIPS_EABI)
- write_register (argreg+1, regval);
+ {
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
+ }
/* Write the high word of the double to the odd register(s). */
- regval = extract_unsigned_integer (val+4-low_offset, 4);
+ regval = extract_unsigned_integer (val + 4 - low_offset, 4);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, 4));
write_register (float_argreg++, regval);
if (!MIPS_EABI)
- {
- write_register (argreg, regval);
- argreg += 2;
+ {
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, 4));
+ write_register (argreg++, regval);
}
}
{
/* This is a floating point value that fits entirely
in a single register. */
- CORE_ADDR regval = extract_address (val, len);
+ /* On 32 bit ABI's the float_argreg is further adjusted
+ above to ensure that it is even register aligned. */
+ LONGEST regval = extract_unsigned_integer (val, len);
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s",
+ float_argreg, phex (regval, len));
write_register (float_argreg++, regval);
if (!MIPS_EABI)
- {
+ {
+ /* CAGNEY: 32 bit MIPS ABI's always reserve two FP
+ registers for each argument. The below is (my
+ guess) to ensure that the corresponding integer
+ register has reserved the same space. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s",
+ argreg, phex (regval, len));
write_register (argreg, regval);
argreg += FP_REGISTER_DOUBLE ? 1 : 2;
}
}
+ /* Reserve space for the FP register. */
+ if (MIPS_REGS_HAVE_HOME_P)
+ stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE);
}
else
{
are treated specially: Irix cc passes them in registers
where gcc sometimes puts them on the stack. For maximum
compatibility, we will put them in both places. */
-
- int odd_sized_struct = ((len > MIPS_REGSIZE) &&
- (len % MIPS_REGSIZE != 0));
+ int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) &&
+ (len % MIPS_SAVED_REGSIZE != 0));
+ /* Structures should be aligned to eight bytes (even arg registers)
+ on MIPS_ABI_O32 if their first member has double precision. */
+ if (gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_O32
+ && mips_type_needs_double_align (arg_type))
+ {
+ if ((argreg & 1))
+ argreg++;
+ }
+ /* Note: Floating-point values that didn't fit into an FP
+ register are only written to memory. */
while (len > 0)
{
- int partial_len = len < MIPS_REGSIZE ? len : MIPS_REGSIZE;
-
- if (argreg > MIPS_LAST_ARG_REGNUM || odd_sized_struct)
+ /* Rememer if the argument was written to the stack. */
+ int stack_used_p = 0;
+ int partial_len = len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE;
+
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, " -- partial=%d",
+ partial_len);
+
+ /* Write this portion of the argument to the stack. */
+ if (argreg > MIPS_LAST_ARG_REGNUM
+ || odd_sized_struct
+ || fp_register_arg_p (typecode, arg_type))
{
- /* Write this portion of the argument to the stack. */
/* Should shorter than int integer values be
promoted to int before being stored? */
-
int longword_offset = 0;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- if (STACK_ARGSIZE == 8 &&
- (typecode == TYPE_CODE_INT ||
- typecode == TYPE_CODE_PTR ||
- typecode == TYPE_CODE_FLT) && len <= 4)
- longword_offset = STACK_ARGSIZE - len;
- else if ((typecode == TYPE_CODE_STRUCT ||
- typecode == TYPE_CODE_UNION) &&
- TYPE_LENGTH (arg_type) < STACK_ARGSIZE)
- longword_offset = STACK_ARGSIZE - len;
-
- write_memory (sp + stack_offset + longword_offset,
- val, partial_len);
+ CORE_ADDR addr;
+ stack_used_p = 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ if (MIPS_STACK_ARGSIZE == 8 &&
+ (typecode == TYPE_CODE_INT ||
+ typecode == TYPE_CODE_PTR ||
+ typecode == TYPE_CODE_FLT) && len <= 4)
+ longword_offset = MIPS_STACK_ARGSIZE - len;
+ else if ((typecode == TYPE_CODE_STRUCT ||
+ typecode == TYPE_CODE_UNION) &&
+ TYPE_LENGTH (arg_type) < MIPS_STACK_ARGSIZE)
+ longword_offset = MIPS_STACK_ARGSIZE - len;
+ }
+
+ if (mips_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%lx",
+ (long) stack_offset);
+ fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%lx",
+ (long) longword_offset);
+ }
+
+ addr = sp + stack_offset + longword_offset;
+
+ if (mips_debug)
+ {
+ int i;
+ fprintf_unfiltered (gdb_stdlog, " @0x%lx ", (long) addr);
+ for (i = 0; i < partial_len; i++)
+ {
+ fprintf_unfiltered (gdb_stdlog, "%02x", val[i] & 0xff);
+ }
+ }
+ write_memory (addr, val, partial_len);
}
- /* Note!!! This is NOT an else clause.
- Odd sized structs may go thru BOTH paths. */
- if (argreg <= MIPS_LAST_ARG_REGNUM)
+ /* Note!!! This is NOT an else clause. Odd sized
+ structs may go thru BOTH paths. Floating point
+ arguments will not. */
+ /* Write this portion of the argument to a general
+ purpose register. */
+ if (argreg <= MIPS_LAST_ARG_REGNUM
+ && !fp_register_arg_p (typecode, arg_type))
{
- CORE_ADDR regval = extract_address (val, partial_len);
+ LONGEST regval = extract_unsigned_integer (val, partial_len);
/* A non-floating-point argument being passed in a
general register. If a struct or union, and if
same for integral types.
Also don't do this adjustment on EABI and O64
- binaries. */
+ binaries.
+
+ cagney/2001-07-23: gdb/179: Also, GCC, when
+ outputting LE O32 with sizeof (struct) <
+ MIPS_SAVED_REGSIZE, generates a left shift as
+ part of storing the argument in a register a
+ register (the left shift isn't generated when
+ sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it
+ is quite possible that this is GCC contradicting
+ the LE/O32 ABI, GDB has not been adjusted to
+ accommodate this. Either someone needs to
+ demonstrate that the LE/O32 ABI specifies such a
+ left shift OR this new ABI gets identified as
+ such and GDB gets tweaked accordingly. */
if (!MIPS_EABI
- && (MIPS_REGSIZE < 8)
- && TARGET_BYTE_ORDER == BIG_ENDIAN
- && (partial_len < MIPS_REGSIZE)
+ && MIPS_SAVED_REGSIZE < 8
+ && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && partial_len < MIPS_SAVED_REGSIZE
&& (typecode == TYPE_CODE_STRUCT ||
typecode == TYPE_CODE_UNION))
- regval <<= ((MIPS_REGSIZE - partial_len) *
+ regval <<= ((MIPS_SAVED_REGSIZE - partial_len) *
TARGET_CHAR_BIT);
+ if (mips_debug)
+ fprintf_filtered (gdb_stdlog, " - reg=%d val=%s",
+ argreg,
+ phex (regval, MIPS_SAVED_REGSIZE));
write_register (argreg, regval);
argreg++;
-
+
/* If this is the old ABI, prevent subsequent floating
point arguments from being passed in floating point
registers. */
if (!MIPS_EABI)
float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
}
-
+
len -= partial_len;
val += partial_len;
- /* The offset onto the stack at which we will start
- copying parameters (after the registers are used up)
- begins at (4 * MIPS_REGSIZE) in the old ABI. This
- leaves room for the "home" area for register parameters.
+ /* Compute the the offset into the stack at which we
+ will copy the next parameter.
+
+ In older ABIs, the caller reserved space for
+ registers that contained arguments. This was loosely
+ refered to as their "home". Consequently, space is
+ always allocated.
- In the new EABI (and the NABI32), the 8 register parameters
- do not have "home" stack space reserved for them, so the
- stack offset does not get incremented until after
- we have used up the 8 parameter registers. */
+ In the new EABI (and the NABI32), the stack_offset
+ only needs to be adjusted when it has been used.. */
- if (!(MIPS_EABI || MIPS_NABI32) ||
- argnum >= 8)
- stack_offset += ROUND_UP (partial_len, STACK_ARGSIZE);
+ if (MIPS_REGS_HAVE_HOME_P || stack_used_p)
+ stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE);
}
}
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stdlog, "\n");
}
+ /* Return adjusted stack pointer. */
+ return sp;
+}
+
+CORE_ADDR
+mips_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
+{
/* Set the return address register to point to the entry
point of the program, where a breakpoint lies in wait. */
- write_register (RA_REGNUM, CALL_DUMMY_ADDRESS());
-
- /* Return adjusted stack pointer. */
+ write_register (RA_REGNUM, CALL_DUMMY_ADDRESS ());
return sp;
}
static void
-mips_push_register(CORE_ADDR *sp, int regno)
+mips_push_register (CORE_ADDR * sp, int regno)
{
char buffer[MAX_REGISTER_RAW_SIZE];
- int regsize = REGISTER_RAW_SIZE (regno);
-
+ int regsize;
+ int offset;
+ if (MIPS_SAVED_REGSIZE < REGISTER_RAW_SIZE (regno))
+ {
+ regsize = MIPS_SAVED_REGSIZE;
+ offset = (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ ? REGISTER_RAW_SIZE (regno) - MIPS_SAVED_REGSIZE
+ : 0);
+ }
+ else
+ {
+ regsize = REGISTER_RAW_SIZE (regno);
+ offset = 0;
+ }
*sp -= regsize;
read_register_gen (regno, buffer);
- write_memory (*sp, buffer, regsize);
+ write_memory (*sp, buffer + offset, regsize);
}
/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<(MIPS_NUMREGS-1). */
#define MASK(i,j) (((1 << ((j)+1))-1) ^ ((1 << (i))-1))
void
-mips_push_dummy_frame()
+mips_push_dummy_frame (void)
{
int ireg;
- struct linked_proc_info *link = (struct linked_proc_info*)
- xmalloc(sizeof(struct linked_proc_info));
+ struct linked_proc_info *link = (struct linked_proc_info *)
+ xmalloc (sizeof (struct linked_proc_info));
mips_extra_func_info_t proc_desc = &link->info;
- CORE_ADDR sp = ADDR_BITS_REMOVE (read_register (SP_REGNUM));
+ CORE_ADDR sp = ADDR_BITS_REMOVE (read_signed_register (SP_REGNUM));
CORE_ADDR old_sp = sp;
link->next = linked_proc_desc_table;
linked_proc_desc_table = link;
/* FIXME! are these correct ? */
-#define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */
+#define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */
#define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<(MIPS_NUMREGS-1))
#define FLOAT_REG_SAVE_MASK MASK(0,19)
#define FLOAT_SINGLE_REG_SAVE_MASK \
*
* Dummy frame layout:
* (high memory)
- * Saved PC
- * Saved MMHI, MMLO, FPC_CSR
- * Saved R31
- * Saved R28
- * ...
- * Saved R1
+ * Saved PC
+ * Saved MMHI, MMLO, FPC_CSR
+ * Saved R31
+ * Saved R28
+ * ...
+ * Saved R1
* Saved D18 (i.e. F19, F18)
* ...
* Saved D0 (i.e. F1, F0)
- * Argument build area and stack arguments written via mips_push_arguments
+ * Argument build area and stack arguments written via mips_push_arguments
* (low memory)
*/
/* Save special registers (PC, MMHI, MMLO, FPC_CSR) */
- PROC_FRAME_REG(proc_desc) = PUSH_FP_REGNUM;
- PROC_FRAME_OFFSET(proc_desc) = 0;
- PROC_FRAME_ADJUST(proc_desc) = 0;
+ PROC_FRAME_REG (proc_desc) = PUSH_FP_REGNUM;
+ PROC_FRAME_OFFSET (proc_desc) = 0;
+ PROC_FRAME_ADJUST (proc_desc) = 0;
mips_push_register (&sp, PC_REGNUM);
mips_push_register (&sp, HI_REGNUM);
mips_push_register (&sp, LO_REGNUM);
mips_push_register (&sp, MIPS_FPU_TYPE == MIPS_FPU_NONE ? 0 : FCRCS_REGNUM);
/* Save general CPU registers */
- PROC_REG_MASK(proc_desc) = GEN_REG_SAVE_MASK;
+ PROC_REG_MASK (proc_desc) = GEN_REG_SAVE_MASK;
/* PROC_REG_OFFSET is the offset of the first saved register from FP. */
- PROC_REG_OFFSET(proc_desc) = sp - old_sp - MIPS_REGSIZE;
- for (ireg = 32; --ireg >= 0; )
- if (PROC_REG_MASK(proc_desc) & (1 << ireg))
+ PROC_REG_OFFSET (proc_desc) = sp - old_sp - MIPS_SAVED_REGSIZE;
+ for (ireg = 32; --ireg >= 0;)
+ if (PROC_REG_MASK (proc_desc) & (1 << ireg))
mips_push_register (&sp, ireg);
/* Save floating point registers starting with high order word */
- PROC_FREG_MASK(proc_desc) =
+ PROC_FREG_MASK (proc_desc) =
MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? FLOAT_REG_SAVE_MASK
: MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? FLOAT_SINGLE_REG_SAVE_MASK : 0;
/* PROC_FREG_OFFSET is the offset of the first saved *double* register
from FP. */
- PROC_FREG_OFFSET(proc_desc) = sp - old_sp - 8;
- for (ireg = 32; --ireg >= 0; )
- if (PROC_FREG_MASK(proc_desc) & (1 << ireg))
+ PROC_FREG_OFFSET (proc_desc) = sp - old_sp - 8;
+ for (ireg = 32; --ireg >= 0;)
+ if (PROC_FREG_MASK (proc_desc) & (1 << ireg))
mips_push_register (&sp, ireg + FP0_REGNUM);
/* Update the frame pointer for the call dummy and the stack pointer.
call dummy address at the entry point. */
write_register (PUSH_FP_REGNUM, old_sp);
write_register (SP_REGNUM, sp);
- PROC_LOW_ADDR(proc_desc) = CALL_DUMMY_ADDRESS();
- PROC_HIGH_ADDR(proc_desc) = CALL_DUMMY_ADDRESS() + 4;
- SET_PROC_DESC_IS_DUMMY(proc_desc);
- PROC_PC_REG(proc_desc) = RA_REGNUM;
+ PROC_LOW_ADDR (proc_desc) = CALL_DUMMY_ADDRESS ();
+ PROC_HIGH_ADDR (proc_desc) = CALL_DUMMY_ADDRESS () + 4;
+ SET_PROC_DESC_IS_DUMMY (proc_desc);
+ PROC_PC_REG (proc_desc) = RA_REGNUM;
}
void
-mips_pop_frame()
+mips_pop_frame (void)
{
register int regnum;
struct frame_info *frame = get_current_frame ();
CORE_ADDR new_sp = FRAME_FP (frame);
- mips_extra_func_info_t proc_desc = frame->proc_desc;
+ mips_extra_func_info_t proc_desc = frame->extra_info->proc_desc;
- write_register (PC_REGNUM, FRAME_SAVED_PC(frame));
+ write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
if (frame->saved_regs == NULL)
mips_find_saved_regs (frame);
for (regnum = 0; regnum < NUM_REGS; regnum++)
&& frame->saved_regs[regnum])
write_register (regnum,
read_memory_integer (frame->saved_regs[regnum],
- MIPS_REGSIZE));
+ MIPS_SAVED_REGSIZE));
}
write_register (SP_REGNUM, new_sp);
flush_cached_frames ();
- if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
+ if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc))
{
struct linked_proc_info *pi_ptr, *prev_ptr;
else
linked_proc_desc_table = pi_ptr->next;
- free (pi_ptr);
+ xfree (pi_ptr);
write_register (HI_REGNUM,
- read_memory_integer (new_sp - 2*MIPS_REGSIZE, MIPS_REGSIZE));
+ read_memory_integer (new_sp - 2 * MIPS_SAVED_REGSIZE,
+ MIPS_SAVED_REGSIZE));
write_register (LO_REGNUM,
- read_memory_integer (new_sp - 3*MIPS_REGSIZE, MIPS_REGSIZE));
+ read_memory_integer (new_sp - 3 * MIPS_SAVED_REGSIZE,
+ MIPS_SAVED_REGSIZE));
if (MIPS_FPU_TYPE != MIPS_FPU_NONE)
write_register (FCRCS_REGNUM,
- read_memory_integer (new_sp - 4*MIPS_REGSIZE, MIPS_REGSIZE));
+ read_memory_integer (new_sp - 4 * MIPS_SAVED_REGSIZE,
+ MIPS_SAVED_REGSIZE));
}
}
static void
-mips_print_register (regnum, all)
- int regnum, all;
+mips_print_register (int regnum, int all)
{
char raw_buffer[MAX_REGISTER_RAW_SIZE];
/* If an even floating point register, also print as double. */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT
- && !((regnum-FP0_REGNUM) & 1))
- if (REGISTER_RAW_SIZE(regnum) == 4) /* this would be silly on MIPS64 or N32 (Irix 6) */
+ && !((regnum - FP0_REGNUM) & 1))
+ if (REGISTER_RAW_SIZE (regnum) == 4) /* this would be silly on MIPS64 or N32 (Irix 6) */
{
- char dbuffer[2 * MAX_REGISTER_RAW_SIZE];
+ char dbuffer[2 * MAX_REGISTER_RAW_SIZE];
read_relative_register_raw_bytes (regnum, dbuffer);
- read_relative_register_raw_bytes (regnum+1, dbuffer+MIPS_REGSIZE);
+ read_relative_register_raw_bytes (regnum + 1, dbuffer + MIPS_REGSIZE);
REGISTER_CONVERT_TO_TYPE (regnum, builtin_type_double, dbuffer);
- printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
- val_print (builtin_type_double, dbuffer, 0,
+ printf_filtered ("(d%d: ", regnum - FP0_REGNUM);
+ val_print (builtin_type_double, dbuffer, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
printf_filtered ("); ");
}
/* If virtual format is floating, print it that way. */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
if (FP_REGISTER_DOUBLE)
- { /* show 8-byte floats as float AND double: */
- int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
+ { /* show 8-byte floats as float AND double: */
+ int offset = 4 * (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG);
printf_filtered (" (float) ");
- val_print (builtin_type_float, raw_buffer + offset, 0,
+ val_print (builtin_type_float, raw_buffer + offset, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
printf_filtered (", (double) ");
- val_print (builtin_type_double, raw_buffer, 0,
+ val_print (builtin_type_double, raw_buffer, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
}
else
- val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0,
+ val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0, 0,
gdb_stdout, 0, 1, 0, Val_pretty_default);
/* Else print as integer in hex. */
else
- print_scalar_formatted (raw_buffer, REGISTER_VIRTUAL_TYPE (regnum),
- 'x', 0, gdb_stdout);
+ {
+ int offset;
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ offset = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
+ else
+ offset = 0;
+
+ print_scalar_formatted (raw_buffer + offset,
+ REGISTER_VIRTUAL_TYPE (regnum),
+ 'x', 0, gdb_stdout);
+ }
}
/* Replacement for generic do_registers_info.
Print regs in pretty columns. */
static int
-do_fp_register_row (regnum)
- int regnum;
-{ /* do values for FP (float) regs */
+do_fp_register_row (int regnum)
+{ /* do values for FP (float) regs */
char *raw_buffer[2];
char *dbl_buffer;
/* use HI and LO to control the order of combining two flt regs */
- int HI = (TARGET_BYTE_ORDER == BIG_ENDIAN);
- int LO = (TARGET_BYTE_ORDER != BIG_ENDIAN);
+ int HI = (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG);
+ int LO = (TARGET_BYTE_ORDER != BFD_ENDIAN_BIG);
double doub, flt1, flt2; /* doubles extracted from raw hex data */
int inv1, inv2, inv3;
-
+
raw_buffer[0] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
raw_buffer[1] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
dbl_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM));
/* Get the data in raw format. */
if (read_relative_register_raw_bytes (regnum, raw_buffer[HI]))
error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
- if (REGISTER_RAW_SIZE(regnum) == 4)
+ if (REGISTER_RAW_SIZE (regnum) == 4)
{
/* 4-byte registers: we can fit two registers per row. */
/* Also print every pair of 4-byte regs as an 8-byte double. */
if (read_relative_register_raw_bytes (regnum + 1, raw_buffer[LO]))
- error ("can't read register %d (%s)",
+ error ("can't read register %d (%s)",
regnum + 1, REGISTER_NAME (regnum + 1));
/* copy the two floats into one double, and unpack both */
- memcpy (dbl_buffer, raw_buffer, sizeof(dbl_buffer));
- flt1 = unpack_double (builtin_type_float, raw_buffer[HI], &inv1);
- flt2 = unpack_double (builtin_type_float, raw_buffer[LO], &inv2);
- doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
-
- printf_filtered (inv1 ? " %-5s: <invalid float>" :
- " %-5s%-17.9g", REGISTER_NAME (regnum), flt1);
- printf_filtered (inv2 ? " %-5s: <invalid float>" :
- " %-5s%-17.9g", REGISTER_NAME (regnum + 1), flt2);
- printf_filtered (inv3 ? " dbl: <invalid double>\n" :
- " dbl: %-24.17g\n", doub);
+ memcpy (dbl_buffer, raw_buffer, 2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+ flt1 = unpack_double (builtin_type_float, raw_buffer[HI], &inv1);
+ flt2 = unpack_double (builtin_type_float, raw_buffer[LO], &inv2);
+ doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
+
+ printf_filtered (" %-5s", REGISTER_NAME (regnum));
+ if (inv1)
+ printf_filtered (": <invalid float>");
+ else
+ printf_filtered ("%-17.9g", flt1);
+
+ printf_filtered (" %-5s", REGISTER_NAME (regnum + 1));
+ if (inv2)
+ printf_filtered (": <invalid float>");
+ else
+ printf_filtered ("%-17.9g", flt2);
+
+ printf_filtered (" dbl: ");
+ if (inv3)
+ printf_filtered ("<invalid double>");
+ else
+ printf_filtered ("%-24.17g", doub);
+ printf_filtered ("\n");
+
/* may want to do hex display here (future enhancement) */
- regnum +=2;
+ regnum += 2;
}
else
- { /* eight byte registers: print each one as float AND as double. */
- int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
+ { /* eight byte registers: print each one as float AND as double. */
+ int offset = 4 * (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG);
- memcpy (dbl_buffer, raw_buffer[HI], sizeof(dbl_buffer));
- flt1 = unpack_double (builtin_type_float,
+ memcpy (dbl_buffer, raw_buffer[HI], 2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+ flt1 = unpack_double (builtin_type_float,
&raw_buffer[HI][offset], &inv1);
- doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
+ doub = unpack_double (builtin_type_double, dbl_buffer, &inv3);
+
+ printf_filtered (" %-5s: ", REGISTER_NAME (regnum));
+ if (inv1)
+ printf_filtered ("<invalid float>");
+ else
+ printf_filtered ("flt: %-17.9g", flt1);
- printf_filtered (inv1 ? " %-5s: <invalid float>" :
- " %-5s flt: %-17.9g", REGISTER_NAME (regnum), flt1);
- printf_filtered (inv3 ? " dbl: <invalid double>\n" :
- " dbl: %-24.17g\n", doub);
+ printf_filtered (" dbl: ");
+ if (inv3)
+ printf_filtered ("<invalid double>");
+ else
+ printf_filtered ("%-24.17g", doub);
+
+ printf_filtered ("\n");
/* may want to do hex display here (future enhancement) */
regnum++;
}
/* Print a row's worth of GP (int) registers, with name labels above */
static int
-do_gp_register_row (regnum)
- int regnum;
+do_gp_register_row (int regnum)
{
/* do values for GP (int) regs */
char raw_buffer[MAX_REGISTER_RAW_SIZE];
int start_regnum = regnum;
int numregs = NUM_REGS;
-/* start-sanitize-sky */
-#ifdef NUM_CORE_REGS
- numregs = NUM_CORE_REGS;
-#endif
-/* end-sanitize-sky */
/* For GP registers, we print a separate row of names above the vals */
printf_filtered (" ");
for (col = 0; col < ncols && regnum < numregs; regnum++)
{
if (*REGISTER_NAME (regnum) == '\0')
- continue; /* unused register */
+ continue; /* unused register */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- break; /* end the row: reached FP register */
- printf_filtered (MIPS_REGSIZE == 8 ? "%17s" : "%9s",
+ break; /* end the row: reached FP register */
+ printf_filtered (MIPS_REGSIZE == 8 ? "%17s" : "%9s",
REGISTER_NAME (regnum));
col++;
}
- printf_filtered (start_regnum < MIPS_NUMREGS ? "\n R%-4d" : "\n ",
+ printf_filtered (start_regnum < MIPS_NUMREGS ? "\n R%-4d" : "\n ",
start_regnum); /* print the R0 to R31 names */
regnum = start_regnum; /* go back to start of row */
for (col = 0; col < ncols && regnum < numregs; regnum++)
{
if (*REGISTER_NAME (regnum) == '\0')
- continue; /* unused register */
+ continue; /* unused register */
if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- break; /* end row: reached FP register */
+ break; /* end row: reached FP register */
/* OK: get the data in raw format. */
if (read_relative_register_raw_bytes (regnum, raw_buffer))
error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
/* pad small registers */
- for (byte = 0; byte < (MIPS_REGSIZE - REGISTER_RAW_SIZE (regnum)); byte++)
+ for (byte = 0; byte < (MIPS_REGSIZE - REGISTER_VIRTUAL_SIZE (regnum)); byte++)
printf_filtered (" ");
/* Now print the register value in hex, endian order. */
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- for (byte = 0; byte < REGISTER_RAW_SIZE (regnum); byte++)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ for (byte = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
+ byte < REGISTER_RAW_SIZE (regnum);
+ byte++)
printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
else
- for (byte = REGISTER_RAW_SIZE (regnum) - 1; byte >= 0; byte--)
+ for (byte = REGISTER_VIRTUAL_SIZE (regnum) - 1;
+ byte >= 0;
+ byte--)
printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
printf_filtered (" ");
col++;
}
- if (col > 0) /* ie. if we actually printed anything... */
+ if (col > 0) /* ie. if we actually printed anything... */
printf_filtered ("\n");
return regnum;
/* MIPS_DO_REGISTERS_INFO(): called by "info register" command */
void
-mips_do_registers_info (regnum, fpregs)
- int regnum;
- int fpregs;
+mips_do_registers_info (int regnum, int fpregs)
{
- if (regnum != -1) /* do one specified register */
+ if (regnum != -1) /* do one specified register */
{
if (*(REGISTER_NAME (regnum)) == '\0')
error ("Not a valid register for the current processor type");
mips_print_register (regnum, 0);
printf_filtered ("\n");
}
- else /* do all (or most) registers */
+ else
+ /* do all (or most) registers */
{
regnum = 0;
while (regnum < NUM_REGS)
{
- if (TYPE_CODE(REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
- if (fpregs) /* true for "INFO ALL-REGISTERS" command */
+ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+ if (fpregs) /* true for "INFO ALL-REGISTERS" command */
regnum = do_fp_register_row (regnum); /* FP regs */
else
regnum += MIPS_NUMREGS; /* skip floating point regs */
else
regnum = do_gp_register_row (regnum); /* GP (int) regs */
-/* start-sanitize-sky */
-#ifdef NUM_CORE_REGS
- /* For the sky project, NUM_REGS includes the vector slaves,
- which are handled elsewhere */
- if (regnum >= NUM_CORE_REGS)
- break;
-#endif
-/* end-sanitize-sky */
}
}
}
Can return -1, meaning no way to tell. */
int
-mips_frame_num_args (frame)
- struct frame_info *frame;
+mips_frame_num_args (struct frame_info *frame)
{
-#if 0 /* FIXME Use or lose this! */
- struct chain_info_t *p;
-
- p = mips_find_cached_frame (FRAME_FP (frame));
- if (p->valid)
- return p->the_info.numargs;
-#endif
return -1;
}
/* Is this a branch with a delay slot? */
-static int is_delayed PARAMS ((unsigned long));
+static int is_delayed (unsigned long);
static int
-is_delayed (insn)
- unsigned long insn;
+is_delayed (unsigned long insn)
{
int i;
for (i = 0; i < NUMOPCODES; ++i)
}
int
-mips_step_skips_delay (pc)
- CORE_ADDR pc;
+mips_step_skips_delay (CORE_ADDR pc)
{
char buf[MIPS_INSTLEN];
if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0)
/* If error reading memory, guess that it is not a delayed branch. */
return 0;
- return is_delayed ((unsigned long)extract_unsigned_integer (buf, MIPS_INSTLEN));
+ return is_delayed ((unsigned long) extract_unsigned_integer (buf, MIPS_INSTLEN));
}
This is a helper function for mips_skip_prologue. */
static CORE_ADDR
-mips32_skip_prologue (pc, lenient)
- CORE_ADDR pc; /* starting PC to search from */
- int lenient;
-{
- t_inst inst;
- CORE_ADDR end_pc;
- int seen_sp_adjust = 0;
- int load_immediate_bytes = 0;
-
- /* Skip the typical prologue instructions. These are the stack adjustment
- instruction and the instructions that save registers on the stack
- or in the gcc frame. */
- for (end_pc = pc + 100; pc < end_pc; pc += MIPS_INSTLEN)
- {
- unsigned long high_word;
+mips32_skip_prologue (CORE_ADDR pc)
+{
+ t_inst inst;
+ CORE_ADDR end_pc;
+ int seen_sp_adjust = 0;
+ int load_immediate_bytes = 0;
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (end_pc = pc + 100; pc < end_pc; pc += MIPS_INSTLEN)
+ {
+ unsigned long high_word;
- inst = mips_fetch_instruction (pc);
- high_word = (inst >> 16) & 0xffff;
+ inst = mips_fetch_instruction (pc);
+ high_word = (inst >> 16) & 0xffff;
-#if 0
- if (lenient && is_delayed (inst))
- continue;
-#endif
+ if (high_word == 0x27bd /* addiu $sp,$sp,offset */
+ || high_word == 0x67bd) /* daddiu $sp,$sp,offset */
+ seen_sp_adjust = 1;
+ else if (inst == 0x03a1e823 || /* subu $sp,$sp,$at */
+ inst == 0x03a8e823) /* subu $sp,$sp,$t0 */
+ seen_sp_adjust = 1;
+ else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */
+ || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */
+ && (inst & 0x001F0000)) /* reg != $zero */
+ continue;
- if (high_word == 0x27bd /* addiu $sp,$sp,offset */
- || high_word == 0x67bd) /* daddiu $sp,$sp,offset */
- seen_sp_adjust = 1;
- else if (inst == 0x03a1e823 || /* subu $sp,$sp,$at */
- inst == 0x03a8e823) /* subu $sp,$sp,$t0 */
- seen_sp_adjust = 1;
- else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */
- /* start-sanitize-r5900 */
- || (inst & 0xFFE00000) == 0x7FA00000 /* sq reg,n($sp) */
- /* end-sanitize-r5900 */
- || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */
- && (inst & 0x001F0000)) /* reg != $zero */
- continue;
-
- else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */
- continue;
- else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000))
- /* sx reg,n($s8) */
- continue; /* reg != $zero */
-
- /* move $s8,$sp. With different versions of gas this will be either
- `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'.
- Accept any one of these. */
- else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
- continue;
-
- else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */
- continue;
- else if (high_word == 0x3c1c) /* lui $gp,n */
- continue;
- else if (high_word == 0x279c) /* addiu $gp,$gp,n */
- continue;
- else if (inst == 0x0399e021 /* addu $gp,$gp,$t9 */
- || inst == 0x033ce021) /* addu $gp,$t9,$gp */
- continue;
- /* The following instructions load $at or $t0 with an immediate
- value in preparation for a stack adjustment via
- subu $sp,$sp,[$at,$t0]. These instructions could also initialize
- a local variable, so we accept them only before a stack adjustment
- instruction was seen. */
- else if (!seen_sp_adjust)
- {
- if (high_word == 0x3c01 || /* lui $at,n */
- high_word == 0x3c08) /* lui $t0,n */
- {
- load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
- continue;
- }
- else if (high_word == 0x3421 || /* ori $at,$at,n */
- high_word == 0x3508 || /* ori $t0,$t0,n */
- high_word == 0x3401 || /* ori $at,$zero,n */
- high_word == 0x3408) /* ori $t0,$zero,n */
- {
- load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
- continue;
- }
- else
- break;
- }
- else
- break;
+ else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */
+ continue;
+ else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000))
+ /* sx reg,n($s8) */
+ continue; /* reg != $zero */
+
+ /* move $s8,$sp. With different versions of gas this will be either
+ `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'.
+ Accept any one of these. */
+ else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+ continue;
+
+ else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */
+ continue;
+ else if (high_word == 0x3c1c) /* lui $gp,n */
+ continue;
+ else if (high_word == 0x279c) /* addiu $gp,$gp,n */
+ continue;
+ else if (inst == 0x0399e021 /* addu $gp,$gp,$t9 */
+ || inst == 0x033ce021) /* addu $gp,$t9,$gp */
+ continue;
+ /* The following instructions load $at or $t0 with an immediate
+ value in preparation for a stack adjustment via
+ subu $sp,$sp,[$at,$t0]. These instructions could also initialize
+ a local variable, so we accept them only before a stack adjustment
+ instruction was seen. */
+ else if (!seen_sp_adjust)
+ {
+ if (high_word == 0x3c01 || /* lui $at,n */
+ high_word == 0x3c08) /* lui $t0,n */
+ {
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+ continue;
+ }
+ else if (high_word == 0x3421 || /* ori $at,$at,n */
+ high_word == 0x3508 || /* ori $t0,$t0,n */
+ high_word == 0x3401 || /* ori $at,$zero,n */
+ high_word == 0x3408) /* ori $t0,$zero,n */
+ {
+ load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+ continue;
+ }
+ else
+ break;
+ }
+ else
+ break;
}
- /* In a frameless function, we might have incorrectly
- skipped some load immediate instructions. Undo the skipping
- if the load immediate was not followed by a stack adjustment. */
- if (load_immediate_bytes && !seen_sp_adjust)
- pc -= load_immediate_bytes;
- return pc;
+ /* In a frameless function, we might have incorrectly
+ skipped some load immediate instructions. Undo the skipping
+ if the load immediate was not followed by a stack adjustment. */
+ if (load_immediate_bytes && !seen_sp_adjust)
+ pc -= load_immediate_bytes;
+ return pc;
}
/* Skip the PC past function prologue instructions (16-bit version).
This is a helper function for mips_skip_prologue. */
static CORE_ADDR
-mips16_skip_prologue (pc, lenient)
- CORE_ADDR pc; /* starting PC to search from */
- int lenient;
+mips16_skip_prologue (CORE_ADDR pc)
{
- CORE_ADDR end_pc;
- int extend_bytes = 0;
- int prev_extend_bytes;
+ CORE_ADDR end_pc;
+ int extend_bytes = 0;
+ int prev_extend_bytes;
- /* Table of instructions likely to be found in a function prologue. */
- static struct
+ /* Table of instructions likely to be found in a function prologue. */
+ static struct
{
unsigned short inst;
unsigned short mask;
- } table[] =
- {
- { 0x6300, 0xff00 }, /* addiu $sp,offset */
- { 0xfb00, 0xff00 }, /* daddiu $sp,offset */
- { 0xd000, 0xf800 }, /* sw reg,n($sp) */
- { 0xf900, 0xff00 }, /* sd reg,n($sp) */
- { 0x6200, 0xff00 }, /* sw $ra,n($sp) */
- { 0xfa00, 0xff00 }, /* sd $ra,n($sp) */
- { 0x673d, 0xffff }, /* move $s1,sp */
- { 0xd980, 0xff80 }, /* sw $a0-$a3,n($s1) */
- { 0x6704, 0xff1c }, /* move reg,$a0-$a3 */
- { 0xe809, 0xf81f }, /* entry pseudo-op */
- { 0x0100, 0xff00 }, /* addiu $s1,$sp,n */
- { 0, 0 } /* end of table marker */
- };
-
- /* Skip the typical prologue instructions. These are the stack adjustment
- instruction and the instructions that save registers on the stack
- or in the gcc frame. */
- for (end_pc = pc + 100; pc < end_pc; pc += MIPS16_INSTLEN)
- {
- unsigned short inst;
- int i;
+ }
+ table[] =
+ {
+ {
+ 0x6300, 0xff00
+ }
+ , /* addiu $sp,offset */
+ {
+ 0xfb00, 0xff00
+ }
+ , /* daddiu $sp,offset */
+ {
+ 0xd000, 0xf800
+ }
+ , /* sw reg,n($sp) */
+ {
+ 0xf900, 0xff00
+ }
+ , /* sd reg,n($sp) */
+ {
+ 0x6200, 0xff00
+ }
+ , /* sw $ra,n($sp) */
+ {
+ 0xfa00, 0xff00
+ }
+ , /* sd $ra,n($sp) */
+ {
+ 0x673d, 0xffff
+ }
+ , /* move $s1,sp */
+ {
+ 0xd980, 0xff80
+ }
+ , /* sw $a0-$a3,n($s1) */
+ {
+ 0x6704, 0xff1c
+ }
+ , /* move reg,$a0-$a3 */
+ {
+ 0xe809, 0xf81f
+ }
+ , /* entry pseudo-op */
+ {
+ 0x0100, 0xff00
+ }
+ , /* addiu $s1,$sp,n */
+ {
+ 0, 0
+ } /* end of table marker */
+ };
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (end_pc = pc + 100; pc < end_pc; pc += MIPS16_INSTLEN)
+ {
+ unsigned short inst;
+ int i;
- inst = mips_fetch_instruction (pc);
+ inst = mips_fetch_instruction (pc);
- /* Normally we ignore an extend instruction. However, if it is
- not followed by a valid prologue instruction, we must adjust
- the pc back over the extend so that it won't be considered
- part of the prologue. */
- if ((inst & 0xf800) == 0xf000) /* extend */
- {
- extend_bytes = MIPS16_INSTLEN;
- continue;
- }
- prev_extend_bytes = extend_bytes;
- extend_bytes = 0;
+ /* Normally we ignore an extend instruction. However, if it is
+ not followed by a valid prologue instruction, we must adjust
+ the pc back over the extend so that it won't be considered
+ part of the prologue. */
+ if ((inst & 0xf800) == 0xf000) /* extend */
+ {
+ extend_bytes = MIPS16_INSTLEN;
+ continue;
+ }
+ prev_extend_bytes = extend_bytes;
+ extend_bytes = 0;
- /* Check for other valid prologue instructions besides extend. */
- for (i = 0; table[i].mask != 0; i++)
- if ((inst & table[i].mask) == table[i].inst) /* found, get out */
- break;
- if (table[i].mask != 0) /* it was in table? */
- continue; /* ignore it */
- else /* non-prologue */
- {
- /* Return the current pc, adjusted backwards by 2 if
- the previous instruction was an extend. */
- return pc - prev_extend_bytes;
- }
+ /* Check for other valid prologue instructions besides extend. */
+ for (i = 0; table[i].mask != 0; i++)
+ if ((inst & table[i].mask) == table[i].inst) /* found, get out */
+ break;
+ if (table[i].mask != 0) /* it was in table? */
+ continue; /* ignore it */
+ else
+ /* non-prologue */
+ {
+ /* Return the current pc, adjusted backwards by 2 if
+ the previous instruction was an extend. */
+ return pc - prev_extend_bytes;
+ }
}
return pc;
}
delay slot of a non-prologue instruction). */
CORE_ADDR
-mips_skip_prologue (pc, lenient)
- CORE_ADDR pc;
- int lenient;
+mips_skip_prologue (CORE_ADDR pc)
{
/* See if we can determine the end of the prologue via the symbol table.
If so, then return either PC, or the PC after the prologue, whichever
instructions. */
if (pc_is_mips16 (pc))
- return mips16_skip_prologue (pc, lenient);
+ return mips16_skip_prologue (pc);
else
- return mips32_skip_prologue (pc, lenient);
+ return mips32_skip_prologue (pc);
}
-#if 0
-/* The lenient prologue stuff should be superseded by the code in
- init_extra_frame_info which looks to see whether the stores mentioned
- in the proc_desc have actually taken place. */
+/* Determine how a return value is stored within the MIPS register
+ file, given the return type `valtype'. */
-/* Is address PC in the prologue (loosely defined) for function at
- STARTADDR? */
+struct return_value_word
+{
+ int len;
+ int reg;
+ int reg_offset;
+ int buf_offset;
+};
-static int
-mips_in_lenient_prologue (startaddr, pc)
- CORE_ADDR startaddr;
- CORE_ADDR pc;
+static void
+return_value_location (struct type *valtype,
+ struct return_value_word *hi,
+ struct return_value_word *lo)
{
- CORE_ADDR end_prologue = mips_skip_prologue (startaddr, 1);
- return pc >= startaddr && pc < end_prologue;
+ int len = TYPE_LENGTH (valtype);
+
+ if (TYPE_CODE (valtype) == TYPE_CODE_FLT
+ && ((MIPS_FPU_TYPE == MIPS_FPU_DOUBLE && (len == 4 || len == 8))
+ || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE && len == 4)))
+ {
+ if (!FP_REGISTER_DOUBLE && len == 8)
+ {
+ /* We need to break a 64bit float in two 32 bit halves and
+ spread them across a floating-point register pair. */
+ lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0;
+ hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4;
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && REGISTER_RAW_SIZE (FP0_REGNUM) == 8)
+ ? 4 : 0);
+ hi->reg_offset = lo->reg_offset;
+ lo->reg = FP0_REGNUM + 0;
+ hi->reg = FP0_REGNUM + 1;
+ lo->len = 4;
+ hi->len = 4;
+ }
+ else
+ {
+ /* The floating point value fits in a single floating-point
+ register. */
+ lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && REGISTER_RAW_SIZE (FP0_REGNUM) == 8
+ && len == 4)
+ ? 4 : 0);
+ lo->reg = FP0_REGNUM;
+ lo->len = len;
+ lo->buf_offset = 0;
+ hi->len = 0;
+ hi->reg_offset = 0;
+ hi->buf_offset = 0;
+ hi->reg = 0;
+ }
+ }
+ else
+ {
+ /* Locate a result possibly spread across two registers. */
+ int regnum = 2;
+ lo->reg = regnum + 0;
+ hi->reg = regnum + 1;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && len < MIPS_SAVED_REGSIZE)
+ {
+ /* "un-left-justify" the value in the low register */
+ lo->reg_offset = MIPS_SAVED_REGSIZE - len;
+ lo->len = len;
+ hi->reg_offset = 0;
+ hi->len = 0;
+ }
+ else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && len > MIPS_SAVED_REGSIZE /* odd-size structs */
+ && len < MIPS_SAVED_REGSIZE * 2
+ && (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+ TYPE_CODE (valtype) == TYPE_CODE_UNION))
+ {
+ /* "un-left-justify" the value spread across two registers. */
+ lo->reg_offset = 2 * MIPS_SAVED_REGSIZE - len;
+ lo->len = MIPS_SAVED_REGSIZE - lo->reg_offset;
+ hi->reg_offset = 0;
+ hi->len = len - lo->len;
+ }
+ else
+ {
+ /* Only perform a partial copy of the second register. */
+ lo->reg_offset = 0;
+ hi->reg_offset = 0;
+ if (len > MIPS_SAVED_REGSIZE)
+ {
+ lo->len = MIPS_SAVED_REGSIZE;
+ hi->len = len - MIPS_SAVED_REGSIZE;
+ }
+ else
+ {
+ lo->len = len;
+ hi->len = 0;
+ }
+ }
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && REGISTER_RAW_SIZE (regnum) == 8
+ && MIPS_SAVED_REGSIZE == 4)
+ {
+ /* Account for the fact that only the least-signficant part
+ of the register is being used */
+ lo->reg_offset += 4;
+ hi->reg_offset += 4;
+ }
+ lo->buf_offset = 0;
+ hi->buf_offset = lo->len;
+ }
}
-#endif
-/* Given a return value in `regbuf' with a type `valtype',
- extract and copy its value into `valbuf'. */
+/* Given a return value in `regbuf' with a type `valtype', extract and
+ copy its value into `valbuf'. */
+
void
-mips_extract_return_value (valtype, regbuf, valbuf)
- struct type *valtype;
- char regbuf[REGISTER_BYTES];
- char *valbuf;
+mips_extract_return_value (struct type *valtype,
+ char regbuf[REGISTER_BYTES],
+ char *valbuf)
{
- int regnum;
- int offset = 0;
- int len = TYPE_LENGTH (valtype);
-
- regnum = 2;
- if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && (MIPS_FPU_TYPE == MIPS_FPU_DOUBLE
- || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE
- && len <= MIPS_FPU_SINGLE_REGSIZE)))
- regnum = FP0_REGNUM;
-
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- { /* "un-left-justify" the value from the register */
- if (len < REGISTER_RAW_SIZE (regnum))
- offset = REGISTER_RAW_SIZE (regnum) - len;
- if (len > REGISTER_RAW_SIZE (regnum) && /* odd-size structs */
- len < REGISTER_RAW_SIZE (regnum) * 2 &&
- (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
- TYPE_CODE (valtype) == TYPE_CODE_UNION))
- offset = 2 * REGISTER_RAW_SIZE (regnum) - len;
- }
- memcpy (valbuf, regbuf + REGISTER_BYTE (regnum) + offset, len);
- REGISTER_CONVERT_TO_TYPE (regnum, valtype, valbuf);
-}
-
-/* Given a return value in `regbuf' with a type `valtype',
- write it's value into the appropriate register. */
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
+
+ memcpy (valbuf + lo.buf_offset,
+ regbuf + REGISTER_BYTE (lo.reg) + lo.reg_offset,
+ lo.len);
+
+ if (hi.len > 0)
+ memcpy (valbuf + hi.buf_offset,
+ regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset,
+ hi.len);
+}
+
+/* Given a return value in `valbuf' with a type `valtype', write it's
+ value into the appropriate register. */
+
void
-mips_store_return_value (valtype, valbuf)
- struct type *valtype;
- char *valbuf;
+mips_store_return_value (struct type *valtype, char *valbuf)
{
- int regnum;
- int offset = 0;
- int len = TYPE_LENGTH (valtype);
char raw_buffer[MAX_REGISTER_RAW_SIZE];
-
- regnum = 2;
- if (TYPE_CODE (valtype) == TYPE_CODE_FLT
- && (MIPS_FPU_TYPE == MIPS_FPU_DOUBLE
- || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE
- && len <= MIPS_REGSIZE)))
- regnum = FP0_REGNUM;
-
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- { /* "left-justify" the value in the register */
- if (len < REGISTER_RAW_SIZE (regnum))
- offset = REGISTER_RAW_SIZE (regnum) - len;
- if (len > REGISTER_RAW_SIZE (regnum) && /* odd-size structs */
- len < REGISTER_RAW_SIZE (regnum) * 2 &&
- (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
- TYPE_CODE (valtype) == TYPE_CODE_UNION))
- offset = 2 * REGISTER_RAW_SIZE (regnum) - len;
- }
- memcpy(raw_buffer + offset, valbuf, len);
- REGISTER_CONVERT_FROM_TYPE(regnum, valtype, raw_buffer);
- write_register_bytes(REGISTER_BYTE (regnum), raw_buffer,
- len > REGISTER_RAW_SIZE (regnum) ?
- len : REGISTER_RAW_SIZE (regnum));
+ struct return_value_word lo;
+ struct return_value_word hi;
+ return_value_location (valtype, &hi, &lo);
+
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len);
+ write_register_bytes (REGISTER_BYTE (lo.reg),
+ raw_buffer,
+ REGISTER_RAW_SIZE (lo.reg));
+
+ if (hi.len > 0)
+ {
+ memset (raw_buffer, 0, sizeof (raw_buffer));
+ memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len);
+ write_register_bytes (REGISTER_BYTE (hi.reg),
+ raw_buffer,
+ REGISTER_RAW_SIZE (hi.reg));
+ }
}
/* Exported procedure: Is PC in the signal trampoline code */
int
-in_sigtramp (pc, ignore)
- CORE_ADDR pc;
- char *ignore; /* function name */
+in_sigtramp (CORE_ADDR pc, char *ignore)
{
if (sigtramp_address == 0)
fixup_sigtramp ();
return (pc >= sigtramp_address && pc < sigtramp_end);
}
+/* Root of all "set mips "/"show mips " commands. This will eventually be
+ used for all MIPS-specific commands. */
+
+static void
+show_mips_command (char *args, int from_tty)
+{
+ help_list (showmipscmdlist, "show mips ", all_commands, gdb_stdout);
+}
+
+static void
+set_mips_command (char *args, int from_tty)
+{
+ printf_unfiltered ("\"set mips\" must be followed by an appropriate subcommand.\n");
+ help_list (setmipscmdlist, "set mips ", all_commands, gdb_stdout);
+}
+
/* Commands to show/set the MIPS FPU type. */
-static void show_mipsfpu_command PARAMS ((char *, int));
static void
-show_mipsfpu_command (args, from_tty)
- char *args;
- int from_tty;
+show_mipsfpu_command (char *args, int from_tty)
{
- char *msg;
char *fpu;
switch (MIPS_FPU_TYPE)
{
case MIPS_FPU_NONE:
fpu = "absent (none)";
break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
}
if (mips_fpu_type_auto)
printf_unfiltered ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
}
-static void set_mipsfpu_command PARAMS ((char *, int));
static void
-set_mipsfpu_command (args, from_tty)
- char *args;
- int from_tty;
+set_mipsfpu_command (char *args, int from_tty)
{
printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
show_mipsfpu_command (args, from_tty);
}
-static void set_mipsfpu_single_command PARAMS ((char *, int));
static void
-set_mipsfpu_single_command (args, from_tty)
- char *args;
- int from_tty;
+set_mipsfpu_single_command (char *args, int from_tty)
{
mips_fpu_type = MIPS_FPU_SINGLE;
mips_fpu_type_auto = 0;
- /* start-sanitize-carp start-sanitize-vr4xxx */
if (GDB_MULTI_ARCH)
{
gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_SINGLE;
}
- /* end-sanitize-carp end-sanitize-vr4xxx */
}
-static void set_mipsfpu_double_command PARAMS ((char *, int));
static void
-set_mipsfpu_double_command (args, from_tty)
- char *args;
- int from_tty;
+set_mipsfpu_double_command (char *args, int from_tty)
{
mips_fpu_type = MIPS_FPU_DOUBLE;
mips_fpu_type_auto = 0;
- /* start-sanitize-carp start-sanitize-vr4xxx */
if (GDB_MULTI_ARCH)
{
gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_DOUBLE;
}
- /* end-sanitize-carp end-sanitize-vr4xxx */
}
-static void set_mipsfpu_none_command PARAMS ((char *, int));
static void
-set_mipsfpu_none_command (args, from_tty)
- char *args;
- int from_tty;
+set_mipsfpu_none_command (char *args, int from_tty)
{
mips_fpu_type = MIPS_FPU_NONE;
mips_fpu_type_auto = 0;
- /* start-sanitize-carp start-sanitize-vr4xxx */
if (GDB_MULTI_ARCH)
{
gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_NONE;
}
- /* end-sanitize-carp end-sanitize-vr4xxx */
}
-static void set_mipsfpu_auto_command PARAMS ((char *, int));
static void
-set_mipsfpu_auto_command (args, from_tty)
- char *args;
- int from_tty;
+set_mipsfpu_auto_command (char *args, int from_tty)
{
mips_fpu_type_auto = 1;
}
/* Command to set the processor type. */
void
-mips_set_processor_type_command (args, from_tty)
- char *args;
- int from_tty;
+mips_set_processor_type_command (char *args, int from_tty)
{
int i;
printf_unfiltered ("%s\n", mips_processor_type_table[i].name);
/* Restore the value. */
- tmp_mips_processor_type = strsave (mips_processor_type);
+ tmp_mips_processor_type = xstrdup (mips_processor_type);
return;
}
-
+
if (!mips_set_processor_type (tmp_mips_processor_type))
{
error ("Unknown processor type `%s'.", tmp_mips_processor_type);
/* Restore its value. */
- tmp_mips_processor_type = strsave (mips_processor_type);
+ tmp_mips_processor_type = xstrdup (mips_processor_type);
}
}
static void
-mips_show_processor_type_command (args, from_tty)
- char *args;
- int from_tty;
+mips_show_processor_type_command (char *args, int from_tty)
{
}
/* Modify the actual processor type. */
int
-mips_set_processor_type (str)
- char *str;
+mips_set_processor_type (char *str)
{
- int i, j;
+ int i;
if (str == NULL)
return 0;
if (strcasecmp (str, mips_processor_type_table[i].name) == 0)
{
mips_processor_type = str;
-
- for (j = 0; j < NUM_REGS; ++j)
- /* FIXME - MIPS should be defining REGISTER_NAME() instead */
- gdb_register_names[j] = mips_processor_type_table[i].regnames[j];
-
+ mips_processor_reg_names = mips_processor_type_table[i].regnames;
return 1;
-
/* FIXME tweak fpu flag too */
}
}
processor id. */
char *
-mips_read_processor_type ()
+mips_read_processor_type (void)
{
CORE_ADDR prid;
prid = read_register (PRID_REGNUM);
if ((prid & ~0xf) == 0x700)
- return savestring ("r3041", strlen("r3041"));
+ return savestring ("r3041", strlen ("r3041"));
return NULL;
}
callable as an sfunc. */
static void
-reinit_frame_cache_sfunc (args, from_tty, c)
- char *args;
- int from_tty;
- struct cmd_list_element *c;
+reinit_frame_cache_sfunc (char *args, int from_tty,
+ struct cmd_list_element *c)
{
reinit_frame_cache ();
}
int
-gdb_print_insn_mips (memaddr, info)
- bfd_vma memaddr;
- disassemble_info *info;
+gdb_print_insn_mips (bfd_vma memaddr, disassemble_info *info)
{
mips_extra_func_info_t proc_desc;
it's definitely a 16-bit function. Otherwise, we have to just
guess that if the address passed in is odd, it's 16-bits. */
if (proc_desc)
- info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ? 16 : TM_PRINT_INSN_MACH;
+ info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ?
+ bfd_mach_mips16 : TM_PRINT_INSN_MACH;
else
- info->mach = pc_is_mips16 (memaddr) ? 16 : TM_PRINT_INSN_MACH;
+ info->mach = pc_is_mips16 (memaddr) ?
+ bfd_mach_mips16 : TM_PRINT_INSN_MACH;
/* Round down the instruction address to the appropriate boundary. */
- memaddr &= (info->mach == 16 ? ~1 : ~3);
-
+ memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3);
+
/* Call the appropriate disassembler based on the target endian-ness. */
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
return print_insn_big_mips (memaddr, info);
else
return print_insn_little_mips (memaddr, info);
(if necessary) to point to the actual memory location where the
breakpoint should be inserted. */
-unsigned char *mips_breakpoint_from_pc (pcptr, lenptr)
- CORE_ADDR *pcptr;
- int *lenptr;
+unsigned char *
+mips_breakpoint_from_pc (CORE_ADDR * pcptr, int *lenptr)
{
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
if (pc_is_mips16 (*pcptr))
{
- static char mips16_big_breakpoint[] = MIPS16_BIG_BREAKPOINT;
+ static unsigned char mips16_big_breakpoint[] =
+ MIPS16_BIG_BREAKPOINT;
*pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
- *lenptr = sizeof(mips16_big_breakpoint);
+ *lenptr = sizeof (mips16_big_breakpoint);
return mips16_big_breakpoint;
}
else
{
- static char big_breakpoint[] = BIG_BREAKPOINT;
- static char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
- static char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
+ static unsigned char big_breakpoint[] = BIG_BREAKPOINT;
+ static unsigned char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
+ static unsigned char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
- *lenptr = sizeof(big_breakpoint);
+ *lenptr = sizeof (big_breakpoint);
if (strcmp (target_shortname, "mips") == 0)
return idt_big_breakpoint;
{
if (pc_is_mips16 (*pcptr))
{
- static char mips16_little_breakpoint[] = MIPS16_LITTLE_BREAKPOINT;
+ static unsigned char mips16_little_breakpoint[] =
+ MIPS16_LITTLE_BREAKPOINT;
*pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
- *lenptr = sizeof(mips16_little_breakpoint);
+ *lenptr = sizeof (mips16_little_breakpoint);
return mips16_little_breakpoint;
}
else
{
- static char little_breakpoint[] = LITTLE_BREAKPOINT;
- static char pmon_little_breakpoint[] = PMON_LITTLE_BREAKPOINT;
- static char idt_little_breakpoint[] = IDT_LITTLE_BREAKPOINT;
+ static unsigned char little_breakpoint[] = LITTLE_BREAKPOINT;
+ static unsigned char pmon_little_breakpoint[] =
+ PMON_LITTLE_BREAKPOINT;
+ static unsigned char idt_little_breakpoint[] =
+ IDT_LITTLE_BREAKPOINT;
- *lenptr = sizeof(little_breakpoint);
+ *lenptr = sizeof (little_breakpoint);
if (strcmp (target_shortname, "mips") == 0)
return idt_little_breakpoint;
cases which must be handled:
* If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
- target PC is in $31 ($ra).
+ target PC is in $31 ($ra).
* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
- and the target PC is in $2.
+ and the target PC is in $2.
* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub
- and the the target PC is in $2. Otherwise this is effectively
- a return stub and the target PC is in $18.
+ before the jal instruction, this is effectively a call stub
+ and the the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18.
See the source code for the stubs in gcc/config/mips/mips16.S for
gory details.
This function implements the SKIP_TRAMPOLINE_CODE macro.
-*/
+ */
CORE_ADDR
-mips_skip_stub (pc)
- CORE_ADDR pc;
+mips_skip_stub (CORE_ADDR pc)
{
char *name;
CORE_ADDR start_addr;
target PC is in $31 ($ra). */
if (strcmp (name, "__mips16_ret_sf") == 0
|| strcmp (name, "__mips16_ret_df") == 0)
- return read_register (RA_REGNUM);
+ return read_signed_register (RA_REGNUM);
if (strncmp (name, "__mips16_call_stub_", 19) == 0)
{
/* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
and the target PC is in $2. */
if (name[19] >= '0' && name[19] <= '9')
- return read_register (2);
+ return read_signed_register (2);
/* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub
- and the the target PC is in $2. Otherwise this is effectively
- a return stub and the target PC is in $18. */
+ before the jal instruction, this is effectively a call stub
+ and the the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18. */
else if (name[19] == 's' || name[19] == 'd')
{
if (pc == start_addr)
{
/* Check if the target of the stub is a compiler-generated
- stub. Such a stub for a function bar might have a name
- like __fn_stub_bar, and might look like this:
- mfc1 $4,$f13
- mfc1 $5,$f12
- mfc1 $6,$f15
- mfc1 $7,$f14
- la $1,bar (becomes a lui/addiu pair)
- jr $1
- So scan down to the lui/addi and extract the target
- address from those two instructions. */
-
- CORE_ADDR target_pc = read_register (2);
+ stub. Such a stub for a function bar might have a name
+ like __fn_stub_bar, and might look like this:
+ mfc1 $4,$f13
+ mfc1 $5,$f12
+ mfc1 $6,$f15
+ mfc1 $7,$f14
+ la $1,bar (becomes a lui/addiu pair)
+ jr $1
+ So scan down to the lui/addi and extract the target
+ address from those two instructions. */
+
+ CORE_ADDR target_pc = read_signed_register (2);
t_inst inst;
int i;
return target_pc;
/* Scan through this _fn_stub_ code for the lui/addiu pair.
- The limit on the search is arbitrarily set to 20
- instructions. FIXME. */
+ The limit on the search is arbitrarily set to 20
+ instructions. FIXME. */
for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSTLEN)
{
- inst = mips_fetch_instruction (target_pc);
- if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
- pc = (inst << 16) & 0xffff0000; /* high word */
- else if ((inst & 0xffff0000) == 0x24210000) /* addiu $at */
- return pc | (inst & 0xffff); /* low word */
+ inst = mips_fetch_instruction (target_pc);
+ if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
+ pc = (inst << 16) & 0xffff0000; /* high word */
+ else if ((inst & 0xffff0000) == 0x24210000) /* addiu $at */
+ return pc | (inst & 0xffff); /* low word */
}
/* Couldn't find the lui/addui pair, so return stub address. */
else
/* This is the 'return' part of a call stub. The return
address is in $r18. */
- return read_register (18);
+ return read_signed_register (18);
}
}
- return 0; /* not a stub */
+ return 0; /* not a stub */
}
This implements the IN_SOLIB_CALL_TRAMPOLINE macro. */
int
-mips_in_call_stub (pc, name)
- CORE_ADDR pc;
- char *name;
+mips_in_call_stub (CORE_ADDR pc, char *name)
{
CORE_ADDR start_addr;
if (name[19] >= '0' && name[19] <= '9')
return 1;
/* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
- before the jal instruction, this is effectively a call stub. */
+ before the jal instruction, this is effectively a call stub. */
else if (name[19] == 's' || name[19] == 'd')
return pc == start_addr;
}
- return 0; /* not a stub */
+ return 0; /* not a stub */
}
This implements the IN_SOLIB_RETURN_TRAMPOLINE macro. */
int
-mips_in_return_stub (pc, name)
- CORE_ADDR pc;
- char *name;
+mips_in_return_stub (CORE_ADDR pc, char *name)
{
CORE_ADDR start_addr;
return 1;
/* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
- i.e. after the jal instruction, this is effectively a return stub. */
+ i.e. after the jal instruction, this is effectively a return stub. */
if (strncmp (name, "__mips16_call_stub_", 19) == 0
&& (name[19] == 's' || name[19] == 'd')
&& pc != start_addr)
return 1;
- return 0; /* not a stub */
+ return 0; /* not a stub */
}
be ignored. This implements the IGNORE_HELPER_CALL macro. */
int
-mips_ignore_helper (pc)
- CORE_ADDR pc;
+mips_ignore_helper (CORE_ADDR pc)
{
char *name;
whose address is the location where the breakpoint should be placed. */
CORE_ADDR
-mips_call_dummy_address ()
+mips_call_dummy_address (void)
{
struct minimal_symbol *sym;
return entry_point_address ();
}
-/* start-sanitize-carp start-sanitize-vr4xxx */
-static gdbarch_init_ftype mips_gdbarch_init;
+/* If the current gcc for this target does not produce correct debugging
+ information for float parameters, both prototyped and unprototyped, then
+ define this macro. This forces gdb to always assume that floats are
+ passed as doubles and then converted in the callee.
+
+ For the mips chip, it appears that the debug info marks the parameters as
+ floats regardless of whether the function is prototyped, but the actual
+ values are passed as doubles for the non-prototyped case and floats for
+ the prototyped case. Thus we choose to make the non-prototyped case work
+ for C and break the prototyped case, since the non-prototyped case is
+ probably much more common. (FIXME). */
+
+static int
+mips_coerce_float_to_double (struct type *formal, struct type *actual)
+{
+ return current_language->la_language == language_c;
+}
+
+/* When debugging a 64 MIPS target running a 32 bit ABI, the size of
+ the register stored on the stack (32) is different to its real raw
+ size (64). The below ensures that registers are fetched from the
+ stack using their ABI size and then stored into the RAW_BUFFER
+ using their raw size.
+
+ The alternative to adding this function would be to add an ABI
+ macro - REGISTER_STACK_SIZE(). */
+
+static void
+mips_get_saved_register (char *raw_buffer,
+ int *optimized,
+ CORE_ADDR *addrp,
+ struct frame_info *frame,
+ int regnum,
+ enum lval_type *lval)
+{
+ CORE_ADDR addr;
+
+ if (!target_has_registers)
+ error ("No registers.");
+
+ /* Normal systems don't optimize out things with register numbers. */
+ if (optimized != NULL)
+ *optimized = 0;
+ addr = find_saved_register (frame, regnum);
+ if (addr != 0)
+ {
+ if (lval != NULL)
+ *lval = lval_memory;
+ if (regnum == SP_REGNUM)
+ {
+ if (raw_buffer != NULL)
+ {
+ /* Put it back in target format. */
+ store_address (raw_buffer, REGISTER_RAW_SIZE (regnum),
+ (LONGEST) addr);
+ }
+ if (addrp != NULL)
+ *addrp = 0;
+ return;
+ }
+ if (raw_buffer != NULL)
+ {
+ LONGEST val;
+ if (regnum < 32)
+ /* Only MIPS_SAVED_REGSIZE bytes of GP registers are
+ saved. */
+ val = read_memory_integer (addr, MIPS_SAVED_REGSIZE);
+ else
+ val = read_memory_integer (addr, REGISTER_RAW_SIZE (regnum));
+ store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), val);
+ }
+ }
+ else
+ {
+ if (lval != NULL)
+ *lval = lval_register;
+ addr = REGISTER_BYTE (regnum);
+ if (raw_buffer != NULL)
+ read_register_gen (regnum, raw_buffer);
+ }
+ if (addrp != NULL)
+ *addrp = addr;
+}
+
+/* Immediately after a function call, return the saved pc.
+ Can't always go through the frames for this because on some machines
+ the new frame is not set up until the new function executes
+ some instructions. */
+
+static CORE_ADDR
+mips_saved_pc_after_call (struct frame_info *frame)
+{
+ return read_signed_register (RA_REGNUM);
+}
+
+
+/* Convert a dbx stab register number (from `r' declaration) to a gdb
+ REGNUM */
+
+static int
+mips_stab_reg_to_regnum (int num)
+{
+ if (num < 32)
+ return num;
+ else
+ return num + FP0_REGNUM - 38;
+}
+
+/* Convert a ecoff register number to a gdb REGNUM */
+
+static int
+mips_ecoff_reg_to_regnum (int num)
+{
+ if (num < 32)
+ return num;
+ else
+ return num + FP0_REGNUM - 32;
+}
+
+/* Convert an integer into an address. By first converting the value
+ into a pointer and then extracting it signed, the address is
+ guarenteed to be correctly sign extended. */
+
+static CORE_ADDR
+mips_integer_to_address (struct type *type, void *buf)
+{
+ char *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr));
+ LONGEST val = unpack_long (type, buf);
+ store_signed_integer (tmp, TYPE_LENGTH (builtin_type_void_data_ptr), val);
+ return extract_signed_integer (tmp,
+ TYPE_LENGTH (builtin_type_void_data_ptr));
+}
+
static struct gdbarch *
-mips_gdbarch_init (info, arches)
- struct gdbarch_info info;
- struct gdbarch_list *arches;
+mips_gdbarch_init (struct gdbarch_info info,
+ struct gdbarch_list *arches)
{
+ static LONGEST mips_call_dummy_words[] =
+ {0};
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
- int elf_abi;
- char *abi_name;
-
- /* find a default for ELF_ABI */
- if (info.abfd != NULL)
- elf_abi = elf_elfheader (info.abfd)->e_flags & EF_MIPS_ABI;
- else if (gdbarch_bfd_arch_info (current_gdbarch)->arch == bfd_arch_mips)
- elf_abi = gdbarch_tdep (current_gdbarch)->elf_abi;
+ int elf_flags;
+ enum mips_abi mips_abi;
+
+ /* Reset the disassembly info, in case it was set to something
+ non-default. */
+ tm_print_insn_info.flavour = bfd_target_unknown_flavour;
+ tm_print_insn_info.arch = bfd_arch_unknown;
+ tm_print_insn_info.mach = 0;
+
+ /* Extract the elf_flags if available */
+ if (info.abfd != NULL
+ && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
+ elf_flags = elf_elfheader (info.abfd)->e_flags;
else
- elf_abi = 0;
+ elf_flags = 0;
+
+ /* Check ELF_FLAGS to see if it specifies the ABI being used. */
+ switch ((elf_flags & EF_MIPS_ABI))
+ {
+ case E_MIPS_ABI_O32:
+ mips_abi = MIPS_ABI_O32;
+ break;
+ case E_MIPS_ABI_O64:
+ mips_abi = MIPS_ABI_O64;
+ break;
+ case E_MIPS_ABI_EABI32:
+ mips_abi = MIPS_ABI_EABI32;
+ break;
+ case E_MIPS_ABI_EABI64:
+ mips_abi = MIPS_ABI_EABI64;
+ break;
+ default:
+ if ((elf_flags & EF_MIPS_ABI2))
+ mips_abi = MIPS_ABI_N32;
+ else
+ mips_abi = MIPS_ABI_UNKNOWN;
+ break;
+ }
+
+ /* Try the architecture for any hint of the corect ABI */
+ if (mips_abi == MIPS_ABI_UNKNOWN
+ && info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips)
+ {
+ switch (info.bfd_arch_info->mach)
+ {
+ case bfd_mach_mips3900:
+ mips_abi = MIPS_ABI_EABI32;
+ break;
+ case bfd_mach_mips4100:
+ case bfd_mach_mips5000:
+ mips_abi = MIPS_ABI_EABI64;
+ break;
+ case bfd_mach_mips8000:
+ case bfd_mach_mips10000:
+ mips_abi = MIPS_ABI_N32;
+ break;
+ }
+ }
+#ifdef MIPS_DEFAULT_ABI
+ if (mips_abi == MIPS_ABI_UNKNOWN)
+ mips_abi = MIPS_DEFAULT_ABI;
+#endif
+
+ if (gdbarch_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: elf_flags = 0x%08x\n",
+ elf_flags);
+ fprintf_unfiltered (gdb_stdlog,
+ "mips_gdbarch_init: mips_abi = %d\n",
+ mips_abi);
+ }
/* try to find a pre-existing architecture */
for (arches = gdbarch_list_lookup_by_info (arches, &info);
{
/* MIPS needs to be pedantic about which ABI the object is
using. */
- if (gdbarch_tdep (current_gdbarch)->elf_abi != elf_abi)
+ if (gdbarch_tdep (arches->gdbarch)->elf_flags != elf_flags)
+ continue;
+ if (gdbarch_tdep (arches->gdbarch)->mips_abi != mips_abi)
continue;
return arches->gdbarch;
}
/* Need a new architecture. Fill in a target specific vector. */
- tdep = (struct gdbarch_tdep*) xmalloc (sizeof (struct gdbarch_tdep));
+ tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
gdbarch = gdbarch_alloc (&info, tdep);
- tdep->elf_abi = elf_abi;
- switch (elf_abi)
+ tdep->elf_flags = elf_flags;
+
+ /* Initially set everything according to the default ABI/ISA. */
+ set_gdbarch_short_bit (gdbarch, 16);
+ set_gdbarch_int_bit (gdbarch, 32);
+ set_gdbarch_float_bit (gdbarch, 32);
+ set_gdbarch_double_bit (gdbarch, 64);
+ set_gdbarch_long_double_bit (gdbarch, 64);
+ set_gdbarch_register_raw_size (gdbarch, mips_register_raw_size);
+ tdep->mips_abi = mips_abi;
+
+ switch (mips_abi)
{
- case E_MIPS_ABI_O32:
- abi_name = "o32";
- tdep->mips_eabi = 0;
+ case MIPS_ABI_O32:
+ tdep->mips_abi_string = "o32";
+ tdep->mips_default_saved_regsize = 4;
+ tdep->mips_default_stack_argsize = 4;
+ tdep->mips_fp_register_double = 0;
+ tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
+ tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 4 - 1;
+ tdep->mips_regs_have_home_p = 1;
+ tdep->gdb_target_is_mips64 = 0;
+ tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
break;
- case E_MIPS_ABI_O64:
- abi_name = "o64";
- tdep->mips_eabi = 0;
+ case MIPS_ABI_O64:
+ tdep->mips_abi_string = "o64";
+ tdep->mips_default_saved_regsize = 8;
+ tdep->mips_default_stack_argsize = 8;
+ tdep->mips_fp_register_double = 1;
+ tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1;
+ tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 4 - 1;
+ tdep->mips_regs_have_home_p = 1;
+ tdep->gdb_target_is_mips64 = 1;
+ tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
break;
- case E_MIPS_ABI_EABI32:
- abi_name = "eabi32";
- tdep->mips_eabi = 1;
+ case MIPS_ABI_EABI32:
+ tdep->mips_abi_string = "eabi32";
+ tdep->mips_default_saved_regsize = 4;
+ tdep->mips_default_stack_argsize = 4;
+ tdep->mips_fp_register_double = 0;
+ tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
+ tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
+ tdep->mips_regs_have_home_p = 0;
+ tdep->gdb_target_is_mips64 = 0;
+ tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
break;
- case E_MIPS_ABI_EABI64:
- abi_name = "eabi64";
- tdep->mips_eabi = 1;
+ case MIPS_ABI_EABI64:
+ tdep->mips_abi_string = "eabi64";
+ tdep->mips_default_saved_regsize = 8;
+ tdep->mips_default_stack_argsize = 8;
+ tdep->mips_fp_register_double = 1;
+ tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
+ tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
+ tdep->mips_regs_have_home_p = 0;
+ tdep->gdb_target_is_mips64 = 1;
+ tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 64);
set_gdbarch_ptr_bit (gdbarch, 64);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+ break;
+ case MIPS_ABI_N32:
+ tdep->mips_abi_string = "n32";
+ tdep->mips_default_saved_regsize = 4;
+ tdep->mips_default_stack_argsize = 8;
+ tdep->mips_fp_register_double = 1;
+ tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
+ tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
+ tdep->mips_regs_have_home_p = 0;
+ tdep->gdb_target_is_mips64 = 0;
+ tdep->default_mask_address_p = 0;
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+
+ /* Set up the disassembler info, so that we get the right
+ register names from libopcodes. */
+ tm_print_insn_info.flavour = bfd_target_elf_flavour;
+ tm_print_insn_info.arch = bfd_arch_mips;
+ if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mips
+ && info.bfd_arch_info->mach)
+ tm_print_insn_info.mach = info.bfd_arch_info->mach;
+ else
+ tm_print_insn_info.mach = bfd_mach_mips8000;
break;
default:
- abi_name = "default";
- tdep->mips_eabi = 0;
+ tdep->mips_abi_string = "default";
+ tdep->mips_default_saved_regsize = MIPS_REGSIZE;
+ tdep->mips_default_stack_argsize = MIPS_REGSIZE;
+ tdep->mips_fp_register_double = (REGISTER_VIRTUAL_SIZE (FP0_REGNUM) == 8);
+ tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1;
+ tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1;
+ tdep->mips_regs_have_home_p = 1;
+ tdep->gdb_target_is_mips64 = 0;
+ tdep->default_mask_address_p = 0;
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
break;
}
- if (tdep->mips_eabi)
- {
- /* EABI uses R4 through R11 for args */
- tdep->mips_last_arg_regnum = 11;
- /* EABI uses F12 through F19 for args */
- tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 19;
- }
- else
- {
- /* old ABI uses R4 through R7 for args */
- tdep->mips_last_arg_regnum = 7;
- /* old ABI uses F12 through F15 for args */
- tdep->mips_last_fp_arg_regnum = FP0_REGNUM + 15;
- }
- set_gdbarch_long_long_bit (gdbarch, 64);
+
+ /* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE
+ that could indicate -gp32 BUT gas/config/tc-mips.c contains the
+ comment:
+
+ ``We deliberately don't allow "-gp32" to set the MIPS_32BITMODE
+ flag in object files because to do so would make it impossible to
+ link with libraries compiled without "-gp32". This is
+ unnecessarily restrictive.
+
+ We could solve this problem by adding "-gp32" multilibs to gcc,
+ but to set this flag before gcc is built with such multilibs will
+ break too many systems.''
+
+ But even more unhelpfully, the default linker output target for
+ mips64-elf is elf32-bigmips, and has EF_MIPS_32BIT_MODE set, even
+ for 64-bit programs - you need to change the ABI to change this,
+ and not all gcc targets support that currently. Therefore using
+ this flag to detect 32-bit mode would do the wrong thing given
+ the current gcc - it would make GDB treat these 64-bit programs
+ as 32-bit programs by default. */
/* enable/disable the MIPS FPU */
if (!mips_fpu_type_auto)
&& info.bfd_arch_info->arch == bfd_arch_mips)
switch (info.bfd_arch_info->mach)
{
+ case bfd_mach_mips3900:
case bfd_mach_mips4100:
case bfd_mach_mips4111:
- case bfd_mach_mips4121:
tdep->mips_fpu_type = MIPS_FPU_NONE;
break;
+ case bfd_mach_mips4650:
+ tdep->mips_fpu_type = MIPS_FPU_SINGLE;
+ break;
default:
tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
break;
else
tdep->mips_fpu_type = MIPS_FPU_DOUBLE;
- if (gdbarch_debug)
- {
- fprintf_unfiltered (stderr,
- "mips_gdbarch_init: (info)elf_abi 0x%x (%s)\n",
- elf_abi, abi_name);
- fprintf_unfiltered (stderr,
- "mips_gdbarch_init: MIPS_EABI = %d\n",
- tdep->mips_eabi);
- fprintf_unfiltered (stderr,
- "mips_gdbarch_init: MIPS_LAST_ARG_REGNUM = %d\n",
- tdep->mips_last_arg_regnum);
- fprintf_unfiltered (stderr,
- "mips_gdbarch_init: MIPS_LAST_FP_ARG_REGNUM = %d (%d)\n",
- tdep->mips_last_fp_arg_regnum,
- tdep->mips_last_fp_arg_regnum - FP0_REGNUM);
- fprintf_unfiltered (stderr,
- "mips_gdbarch_init: tdep->mips_fpu_type = %d (%s)\n",
- tdep->mips_fpu_type,
- (tdep->mips_fpu_type == MIPS_FPU_NONE ? "none"
- : tdep->mips_fpu_type == MIPS_FPU_SINGLE ? "single"
- : tdep->mips_fpu_type == MIPS_FPU_DOUBLE ? "double"
- : "???"));
- }
-
+ /* MIPS version of register names. NOTE: At present the MIPS
+ register name management is part way between the old -
+ #undef/#define REGISTER_NAMES and the new REGISTER_NAME(nr).
+ Further work on it is required. */
+ set_gdbarch_register_name (gdbarch, mips_register_name);
+ set_gdbarch_read_pc (gdbarch, mips_read_pc);
+ set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
+ set_gdbarch_read_fp (gdbarch, generic_target_read_fp);
+ set_gdbarch_write_fp (gdbarch, generic_target_write_fp);
+ set_gdbarch_read_sp (gdbarch, generic_target_read_sp);
+ set_gdbarch_write_sp (gdbarch, generic_target_write_sp);
+
+ /* Add/remove bits from an address. The MIPS needs be careful to
+ ensure that all 32 bit addresses are sign extended to 64 bits. */
+ set_gdbarch_addr_bits_remove (gdbarch, mips_addr_bits_remove);
+
+ /* There's a mess in stack frame creation. See comments in
+ blockframe.c near reference to INIT_FRAME_PC_FIRST. */
+ set_gdbarch_init_frame_pc_first (gdbarch, mips_init_frame_pc_first);
+ set_gdbarch_init_frame_pc (gdbarch, init_frame_pc_noop);
+
+ /* Map debug register numbers onto internal register numbers. */
+ set_gdbarch_stab_reg_to_regnum (gdbarch, mips_stab_reg_to_regnum);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, mips_ecoff_reg_to_regnum);
+
+ /* Initialize a frame */
+ set_gdbarch_init_extra_frame_info (gdbarch, mips_init_extra_frame_info);
+
+ /* MIPS version of CALL_DUMMY */
+
+ set_gdbarch_call_dummy_p (gdbarch, 1);
+ set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
+ set_gdbarch_use_generic_dummy_frames (gdbarch, 0);
+ set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT);
+ set_gdbarch_call_dummy_address (gdbarch, mips_call_dummy_address);
+ set_gdbarch_call_dummy_start_offset (gdbarch, 0);
+ set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1);
+ set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
+ set_gdbarch_call_dummy_length (gdbarch, 0);
+ set_gdbarch_pc_in_call_dummy (gdbarch, pc_in_call_dummy_at_entry_point);
+ set_gdbarch_call_dummy_words (gdbarch, mips_call_dummy_words);
+ set_gdbarch_sizeof_call_dummy_words (gdbarch, sizeof (mips_call_dummy_words));
+ set_gdbarch_push_return_address (gdbarch, mips_push_return_address);
+ set_gdbarch_push_arguments (gdbarch, mips_push_arguments);
+ set_gdbarch_register_convertible (gdbarch, generic_register_convertible_not);
+ set_gdbarch_coerce_float_to_double (gdbarch, mips_coerce_float_to_double);
+
+ set_gdbarch_frame_chain_valid (gdbarch, func_frame_chain_valid);
+ set_gdbarch_get_saved_register (gdbarch, mips_get_saved_register);
+
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+ set_gdbarch_breakpoint_from_pc (gdbarch, mips_breakpoint_from_pc);
+ set_gdbarch_decr_pc_after_break (gdbarch, 0);
+
+ set_gdbarch_skip_prologue (gdbarch, mips_skip_prologue);
+ set_gdbarch_saved_pc_after_call (gdbarch, mips_saved_pc_after_call);
+
+ set_gdbarch_pointer_to_address (gdbarch, signed_pointer_to_address);
+ set_gdbarch_address_to_pointer (gdbarch, address_to_signed_pointer);
+ set_gdbarch_integer_to_address (gdbarch, mips_integer_to_address);
return gdbarch;
}
-/* end-sanitize-carp end-sanitize-vr4xxx */
+static void
+mips_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (tdep != NULL)
+ {
+ int ef_mips_arch;
+ int ef_mips_32bitmode;
+ /* determine the ISA */
+ switch (tdep->elf_flags & EF_MIPS_ARCH)
+ {
+ case E_MIPS_ARCH_1:
+ ef_mips_arch = 1;
+ break;
+ case E_MIPS_ARCH_2:
+ ef_mips_arch = 2;
+ break;
+ case E_MIPS_ARCH_3:
+ ef_mips_arch = 3;
+ break;
+ case E_MIPS_ARCH_4:
+ ef_mips_arch = 4;
+ break;
+ default:
+ ef_mips_arch = 0;
+ break;
+ }
+ /* determine the size of a pointer */
+ ef_mips_32bitmode = (tdep->elf_flags & EF_MIPS_32BITMODE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: tdep->elf_flags = 0x%x\n",
+ tdep->elf_flags);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ef_mips_32bitmode = %d\n",
+ ef_mips_32bitmode);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ef_mips_arch = %d\n",
+ ef_mips_arch);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: tdep->mips_abi = %d (%s)\n",
+ tdep->mips_abi,
+ tdep->mips_abi_string);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: mips_mask_address_p() %d (default %d)\n",
+ mips_mask_address_p (),
+ tdep->default_mask_address_p);
+ }
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
+ FP_REGISTER_DOUBLE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_DEFAULT_FPU_TYPE = %d (%s)\n",
+ MIPS_DEFAULT_FPU_TYPE,
+ (MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_NONE ? "none"
+ : MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_SINGLE ? "single"
+ : MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_DOUBLE ? "double"
+ : "???"));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_EABI = %d\n",
+ MIPS_EABI);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_LAST_FP_ARG_REGNUM = %d (%d regs)\n",
+ MIPS_LAST_FP_ARG_REGNUM,
+ MIPS_LAST_FP_ARG_REGNUM - FPA0_REGNUM + 1);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_FPU_TYPE = %d (%s)\n",
+ MIPS_FPU_TYPE,
+ (MIPS_FPU_TYPE == MIPS_FPU_NONE ? "none"
+ : MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? "single"
+ : MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? "double"
+ : "???"));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_DEFAULT_SAVED_REGSIZE = %d\n",
+ MIPS_DEFAULT_SAVED_REGSIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n",
+ FP_REGISTER_DOUBLE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_REGS_HAVE_HOME_P = %d\n",
+ MIPS_REGS_HAVE_HOME_P);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_DEFAULT_STACK_ARGSIZE = %d\n",
+ MIPS_DEFAULT_STACK_ARGSIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_STACK_ARGSIZE = %d\n",
+ MIPS_STACK_ARGSIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_REGSIZE = %d\n",
+ MIPS_REGSIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: A0_REGNUM = %d\n",
+ A0_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ADDR_BITS_REMOVE # %s\n",
+ XSTRING (ADDR_BITS_REMOVE(ADDR)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ATTACH_DETACH # %s\n",
+ XSTRING (ATTACH_DETACH));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: BADVADDR_REGNUM = %d\n",
+ BADVADDR_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: BIG_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: CAUSE_REGNUM = %d\n",
+ CAUSE_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: CPLUS_MARKER = %c\n",
+ CPLUS_MARKER);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: DEFAULT_MIPS_TYPE = %s\n",
+ DEFAULT_MIPS_TYPE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: DO_REGISTERS_INFO # %s\n",
+ XSTRING (DO_REGISTERS_INFO));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: DWARF_REG_TO_REGNUM # %s\n",
+ XSTRING (DWARF_REG_TO_REGNUM (REGNUM)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ECOFF_REG_TO_REGNUM # %s\n",
+ XSTRING (ECOFF_REG_TO_REGNUM (REGNUM)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ELF_MAKE_MSYMBOL_SPECIAL # %s\n",
+ XSTRING (ELF_MAKE_MSYMBOL_SPECIAL (SYM, MSYM)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FCRCS_REGNUM = %d\n",
+ FCRCS_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FCRIR_REGNUM = %d\n",
+ FCRIR_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n",
+ FIRST_EMBED_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: FPA0_REGNUM = %d\n",
+ FPA0_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: GDB_TARGET_IS_MIPS64 = %d\n",
+ GDB_TARGET_IS_MIPS64);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: GDB_TARGET_MASK_DISAS_PC # %s\n",
+ XSTRING (GDB_TARGET_MASK_DISAS_PC (PC)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: GDB_TARGET_UNMASK_DISAS_PC # %s\n",
+ XSTRING (GDB_TARGET_UNMASK_DISAS_PC (PC)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: GEN_REG_SAVE_MASK = %d\n",
+ GEN_REG_SAVE_MASK);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: HAVE_NONSTEPPABLE_WATCHPOINT # %s\n",
+ XSTRING (HAVE_NONSTEPPABLE_WATCHPOINT));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: HI_REGNUM = %d\n",
+ HI_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IDT_BIG_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IDT_LITTLE_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IGNORE_HELPER_CALL # %s\n",
+ XSTRING (IGNORE_HELPER_CALL (PC)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IN_SIGTRAMP # %s\n",
+ XSTRING (IN_SIGTRAMP (PC, NAME)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n",
+ XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IN_SOLIB_RETURN_TRAMPOLINE # %s\n",
+ XSTRING (IN_SOLIB_RETURN_TRAMPOLINE (PC, NAME)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: IS_MIPS16_ADDR = FIXME!\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: LAST_EMBED_REGNUM = %d\n",
+ LAST_EMBED_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: LITTLE_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: LO_REGNUM = %d\n",
+ LO_REGNUM);
+#ifdef MACHINE_CPROC_FP_OFFSET
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MACHINE_CPROC_FP_OFFSET = %d\n",
+ MACHINE_CPROC_FP_OFFSET);
+#endif
+#ifdef MACHINE_CPROC_PC_OFFSET
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MACHINE_CPROC_PC_OFFSET = %d\n",
+ MACHINE_CPROC_PC_OFFSET);
+#endif
+#ifdef MACHINE_CPROC_SP_OFFSET
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MACHINE_CPROC_SP_OFFSET = %d\n",
+ MACHINE_CPROC_SP_OFFSET);
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MAKE_MIPS16_ADDR = FIXME!\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS16_BIG_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS16_INSTLEN = %d\n",
+ MIPS16_INSTLEN);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS16_LITTLE_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_EFI_SYMBOL_NAME = multi-arch!!\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_INSTLEN = %d\n",
+ MIPS_INSTLEN);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_LAST_ARG_REGNUM = %d (%d regs)\n",
+ MIPS_LAST_ARG_REGNUM,
+ MIPS_LAST_ARG_REGNUM - A0_REGNUM + 1);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_NUMREGS = %d\n",
+ MIPS_NUMREGS);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_REGISTER_NAMES = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MIPS_SAVED_REGSIZE = %d\n",
+ MIPS_SAVED_REGSIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MSYMBOL_IS_SPECIAL = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: MSYMBOL_SIZE # %s\n",
+ XSTRING (MSYMBOL_SIZE (MSYM)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: OP_LDFPR = used?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: OP_LDGPR = used?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PMON_BIG_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PMON_LITTLE_BREAKPOINT = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PRID_REGNUM = %d\n",
+ PRID_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PRINT_EXTRA_FRAME_INFO # %s\n",
+ XSTRING (PRINT_EXTRA_FRAME_INFO (FRAME)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_DESC_IS_DUMMY = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_FRAME_ADJUST = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_FRAME_OFFSET = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_FRAME_REG = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_FREG_MASK = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_FREG_OFFSET = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_HIGH_ADDR = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_LOW_ADDR = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_PC_REG = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_REG_MASK = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_REG_OFFSET = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PROC_SYMBOL = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PS_REGNUM = %d\n",
+ PS_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: PUSH_FP_REGNUM = %d\n",
+ PUSH_FP_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: RA_REGNUM = %d\n",
+ RA_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: REGISTER_CONVERT_FROM_TYPE # %s\n",
+ XSTRING (REGISTER_CONVERT_FROM_TYPE (REGNUM, VALTYPE, RAW_BUFFER)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: REGISTER_CONVERT_TO_TYPE # %s\n",
+ XSTRING (REGISTER_CONVERT_TO_TYPE (REGNUM, VALTYPE, RAW_BUFFER)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: REGISTER_NAMES = delete?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ROUND_DOWN = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ROUND_UP = function?\n");
+#ifdef SAVED_BYTES
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SAVED_BYTES = %d\n",
+ SAVED_BYTES);
+#endif
+#ifdef SAVED_FP
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SAVED_FP = %d\n",
+ SAVED_FP);
+#endif
+#ifdef SAVED_PC
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SAVED_PC = %d\n",
+ SAVED_PC);
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SETUP_ARBITRARY_FRAME # %s\n",
+ XSTRING (SETUP_ARBITRARY_FRAME (NUMARGS, ARGS)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SET_PROC_DESC_IS_DUMMY = function?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SIGFRAME_BASE = %d\n",
+ SIGFRAME_BASE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SIGFRAME_FPREGSAVE_OFF = %d\n",
+ SIGFRAME_FPREGSAVE_OFF);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SIGFRAME_PC_OFF = %d\n",
+ SIGFRAME_PC_OFF);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SIGFRAME_REGSAVE_OFF = %d\n",
+ SIGFRAME_REGSAVE_OFF);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SIGFRAME_REG_SIZE = %d\n",
+ SIGFRAME_REG_SIZE);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SKIP_TRAMPOLINE_CODE # %s\n",
+ XSTRING (SKIP_TRAMPOLINE_CODE (PC)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SOFTWARE_SINGLE_STEP # %s\n",
+ XSTRING (SOFTWARE_SINGLE_STEP (SIG, BP_P)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P () = %d\n",
+ SOFTWARE_SINGLE_STEP_P ());
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: STAB_REG_TO_REGNUM # %s\n",
+ XSTRING (STAB_REG_TO_REGNUM (REGNUM)));
+#ifdef STACK_END_ADDR
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: STACK_END_ADDR = %d\n",
+ STACK_END_ADDR);
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: STEP_SKIPS_DELAY # %s\n",
+ XSTRING (STEP_SKIPS_DELAY (PC)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: STEP_SKIPS_DELAY_P = %d\n",
+ STEP_SKIPS_DELAY_P);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: STOPPED_BY_WATCHPOINT # %s\n",
+ XSTRING (STOPPED_BY_WATCHPOINT (WS)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: T9_REGNUM = %d\n",
+ T9_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TABULAR_REGISTER_OUTPUT = used?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TARGET_CAN_USE_HARDWARE_WATCHPOINT # %s\n",
+ XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT (TYPE,CNT,OTHERTYPE)));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TARGET_HAS_HARDWARE_WATCHPOINTS # %s\n",
+ XSTRING (TARGET_HAS_HARDWARE_WATCHPOINTS));
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TARGET_MIPS = used?\n");
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TM_PRINT_INSN_MACH # %s\n",
+ XSTRING (TM_PRINT_INSN_MACH));
+#ifdef TRACE_CLEAR
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TRACE_CLEAR # %s\n",
+ XSTRING (TRACE_CLEAR (THREAD, STATE)));
+#endif
+#ifdef TRACE_FLAVOR
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TRACE_FLAVOR = %d\n",
+ TRACE_FLAVOR);
+#endif
+#ifdef TRACE_FLAVOR_SIZE
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TRACE_FLAVOR_SIZE = %d\n",
+ TRACE_FLAVOR_SIZE);
+#endif
+#ifdef TRACE_SET
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: TRACE_SET # %s\n",
+ XSTRING (TRACE_SET (X,STATE)));
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: UNMAKE_MIPS16_ADDR = function?\n");
+#ifdef UNUSED_REGNUM
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: UNUSED_REGNUM = %d\n",
+ UNUSED_REGNUM);
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: V0_REGNUM = %d\n",
+ V0_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: VM_MIN_ADDRESS = %ld\n",
+ (long) VM_MIN_ADDRESS);
+#ifdef VX_NUM_REGS
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: VX_NUM_REGS = %d (used?)\n",
+ VX_NUM_REGS);
+#endif
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: ZERO_REGNUM = %d\n",
+ ZERO_REGNUM);
+ fprintf_unfiltered (file,
+ "mips_dump_tdep: _PROC_MAGIC_ = %d\n",
+ _PROC_MAGIC_);
+}
void
-_initialize_mips_tdep ()
+_initialize_mips_tdep (void)
{
static struct cmd_list_element *mipsfpulist = NULL;
struct cmd_list_element *c;
- /* start-sanitize-carp start-sanitize-vr4xxx */
- if (GDB_MULTI_ARCH)
- register_gdbarch_init (bfd_arch_mips, mips_gdbarch_init);
- /* end-sanitize-carp end-sanitize-vr4xxx */
- if (!tm_print_insn) /* Someone may have already set it */
+ gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep);
+ if (!tm_print_insn) /* Someone may have already set it */
tm_print_insn = gdb_print_insn_mips;
+ /* Add root prefix command for all "set mips"/"show mips" commands */
+ add_prefix_cmd ("mips", no_class, set_mips_command,
+ "Various MIPS specific commands.",
+ &setmipscmdlist, "set mips ", 0, &setlist);
+
+ add_prefix_cmd ("mips", no_class, show_mips_command,
+ "Various MIPS specific commands.",
+ &showmipscmdlist, "show mips ", 0, &showlist);
+
+ /* Allow the user to override the saved register size. */
+ add_show_from_set (add_set_enum_cmd ("saved-gpreg-size",
+ class_obscure,
+ size_enums,
+ &mips_saved_regsize_string, "\
+Set size of general purpose registers saved on the stack.\n\
+This option can be set to one of:\n\
+ 32 - Force GDB to treat saved GP registers as 32-bit\n\
+ 64 - Force GDB to treat saved GP registers as 64-bit\n\
+ auto - Allow GDB to use the target's default setting or autodetect the\n\
+ saved GP register size from information contained in the executable.\n\
+ (default: auto)",
+ &setmipscmdlist),
+ &showmipscmdlist);
+
+ /* Allow the user to override the argument stack size. */
+ add_show_from_set (add_set_enum_cmd ("stack-arg-size",
+ class_obscure,
+ size_enums,
+ &mips_stack_argsize_string, "\
+Set the amount of stack space reserved for each argument.\n\
+This option can be set to one of:\n\
+ 32 - Force GDB to allocate 32-bit chunks per argument\n\
+ 64 - Force GDB to allocate 64-bit chunks per argument\n\
+ auto - Allow GDB to determine the correct setting from the current\n\
+ target and executable (default)",
+ &setmipscmdlist),
+ &showmipscmdlist);
+
/* Let the user turn off floating point and set the fence post for
heuristic_proc_start. */
"Select single-precision MIPS floating-point coprocessor.",
&mipsfpulist);
add_cmd ("double", class_support, set_mipsfpu_double_command,
- "Select double-precision MIPS floating-point coprocessor .",
+ "Select double-precision MIPS floating-point coprocessor.",
&mipsfpulist);
add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist);
add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
"Show current use of MIPS floating-point coprocessor target.",
&showlist);
- /* start-sanitize-carp start-sanitize-vr4xxx */
#if !GDB_MULTI_ARCH
- /* end-sanitize-carp end-sanitize-vr4xxx */
c = add_set_cmd ("processor", class_support, var_string_noescape,
(char *) &tmp_mips_processor_type,
"Set the type of MIPS processor in use.\n\
Set this to be able to access processor-type-specific registers.\n\
",
&setlist);
- c->function.cfunc = mips_set_processor_type_command;
+ set_cmd_cfunc (c, mips_set_processor_type_command);
c = add_show_from_set (c, &showlist);
- c->function.cfunc = mips_show_processor_type_command;
+ set_cmd_cfunc (c, mips_show_processor_type_command);
- tmp_mips_processor_type = strsave (DEFAULT_MIPS_TYPE);
- mips_set_processor_type_command (strsave (DEFAULT_MIPS_TYPE), 0);
- /* start-sanitize-carp start-sanitize-vr4xxx */
+ tmp_mips_processor_type = xstrdup (DEFAULT_MIPS_TYPE);
+ mips_set_processor_type_command (xstrdup (DEFAULT_MIPS_TYPE), 0);
#endif
- /* end-sanitize-carp end-sanitize-vr4xxx */
/* We really would like to have both "0" and "unlimited" work, but
command.c doesn't deal with that. So make it a var_zinteger
&setlist);
/* We need to throw away the frame cache when we set this, since it
might change our ability to get backtraces. */
- c->function.sfunc = reinit_frame_cache_sfunc;
+ set_cmd_sfunc (c, reinit_frame_cache_sfunc);
add_show_from_set (c, &showlist);
/* Allow the user to control whether the upper bits of 64-bit
addresses should be zeroed. */
- add_show_from_set
- (add_set_cmd ("mask-address", no_class, var_boolean, (char *)&mask_address_p,
- "Set zeroing of upper 32 bits of 64-bit addresses.\n\
-Use \"on\" to enable the masking, and \"off\" to disable it.\n\
-Without an argument, zeroing of upper address bits is enabled.", &setlist),
- &showlist);
+ c = add_set_auto_boolean_cmd ("mask-address", no_class, &mask_address_var,
+ "Set zeroing of upper 32 bits of 64-bit addresses.\n\
+Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to allow GDB to determine\n\
+the correct value.\n",
+ &setmipscmdlist);
+ add_cmd ("mask-address", no_class, show_mask_address,
+ "Show current mask-address value", &showmipscmdlist);
+
+ /* Allow the user to control the size of 32 bit registers within the
+ raw remote packet. */
+ add_show_from_set (add_set_cmd ("remote-mips64-transfers-32bit-regs",
+ class_obscure,
+ var_boolean,
+ (char *)&mips64_transfers_32bit_regs_p, "\
+Set compatibility with MIPS targets that transfers 32 and 64 bit quantities.\n\
+Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\
+that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\
+64 bits for others. Use \"off\" to disable compatibility mode",
+ &setlist),
+ &showlist);
+
+ /* Debug this files internals. */
+ add_show_from_set (add_set_cmd ("mips", class_maintenance, var_zinteger,
+ &mips_debug, "Set mips debugging.\n\
+When non-zero, mips specific debugging is enabled.", &setdebuglist),
+ &showdebuglist);
}
+