-/* Target-dependent code for the Matsushita MN10300 for GDB, the GNU debugger.\r
-\r
- Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free\r
- Software Foundation, Inc.\r
-\r
- This file is part of GDB.\r
-\r
- This program is free software; you can redistribute it and/or modify\r
- it under the terms of the GNU General Public License as published by\r
- the Free Software Foundation; either version 2 of the License, or\r
- (at your option) any later version.\r
-\r
- This program is distributed in the hope that it will be useful,\r
- but WITHOUT ANY WARRANTY; without even the implied warranty of\r
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
- GNU General Public License for more details.\r
-\r
- You should have received a copy of the GNU General Public License\r
- along with this program; if not, write to the Free Software\r
- Foundation, Inc., 59 Temple Place - Suite 330,\r
- Boston, MA 02111-1307, USA. */\r
-\r
-/* MVS Notes:\r
-\r
- To get from 1.1 to 1.2, add:\r
- use_struct_convention\r
- store_return_value\r
- extract_return_value\r
- extract_struct_value_address\r
- \r
- Make sure to use regcache. */\r
-\r
-/* MVS Notes:\r
-\r
- Apparently cannot run without a stub placeholder for unwind_dummy_id. \r
-*/\r
-\r
-/* MVS Notes:\r
-\r
- To get from 1.2 to 1.3, add:\r
- read_pc, write_pc\r
- frame_unwind_init\r
- struct mn10300_unwind_cache\r
- unwind_pc\r
- unwind_dummy_id\r
- frame_this_id\r
- frame_prev_register\r
- frame_sniffer (struct mn10300_frame_unwind)\r
-*/\r
-\r
-#include "defs.h"\r
-#include "arch-utils.h"\r
-#include "dis-asm.h"\r
-#include "gdbtypes.h"\r
-#include "regcache.h"\r
-#include "gdb_string.h"\r
-#include "gdb_assert.h"\r
-#include "frame.h"\r
-#include "frame-unwind.h"\r
-#include "frame-base.h"\r
-#include "trad-frame.h"\r
-#include "symtab.h"\r
-#include "dwarf2-frame.h"\r
-#include "regcache.h"\r
-\r
-#include "mn10300-tdep.h"\r
-\r
-enum {\r
- E_D0_REGNUM = 0,\r
- E_D1_REGNUM = 1,\r
- E_D2_REGNUM = 2,\r
- E_D3_REGNUM = 3,\r
- E_A0_REGNUM = 4,\r
- E_A1_REGNUM = 5,\r
- E_A2_REGNUM = 6,\r
- E_A3_REGNUM = 7,\r
- E_SP_REGNUM = 8,\r
- E_PC_REGNUM = 9,\r
- E_MDR_REGNUM = 10,\r
- E_PSW_REGNUM = 11,\r
- E_LIR_REGNUM = 12,\r
- E_LAR_REGNUM = 13,\r
- E_MDRQ_REGNUM = 14,\r
- E_E0_REGNUM = 15,\r
- E_MCRH_REGNUM = 26,\r
- E_MCRL_REGNUM = 27,\r
- E_MCVF_REGNUM = 28,\r
- E_NUM_REGS = 32\r
-};\r
-\r
-\r
-/* Compute the alignment required by a type. */\r
-\r
-static int\r
-mn10300_type_align (struct type *type)\r
-{\r
- int i, align = 1;\r
-\r
- switch (TYPE_CODE (type))\r
- {\r
- case TYPE_CODE_INT:\r
- case TYPE_CODE_ENUM:\r
- case TYPE_CODE_SET:\r
- case TYPE_CODE_RANGE:\r
- case TYPE_CODE_CHAR:\r
- case TYPE_CODE_BOOL:\r
- case TYPE_CODE_FLT:\r
- case TYPE_CODE_PTR:\r
- case TYPE_CODE_REF:\r
- return TYPE_LENGTH (type);\r
-\r
- case TYPE_CODE_COMPLEX:\r
- return TYPE_LENGTH (type) / 2;\r
-\r
- case TYPE_CODE_STRUCT:\r
- case TYPE_CODE_UNION:\r
- for (i = 0; i < TYPE_NFIELDS (type); i++)\r
- {\r
- int falign = mn10300_type_align (TYPE_FIELD_TYPE (type, i));\r
- while (align < falign)\r
- align <<= 1;\r
- }\r
- return align;\r
-\r
- case TYPE_CODE_ARRAY:\r
- /* HACK! Structures containing arrays, even small ones, are not\r
- elligible for returning in registers. */\r
- return 256;\r
-\r
- case TYPE_CODE_TYPEDEF:\r
- return mn10300_type_align (check_typedef (type));\r
-\r
- default:\r
- internal_error (__FILE__, __LINE__, _("bad switch"));\r
- }\r
-}\r
-\r
-/* MVS note this is deprecated. */\r
-/* Should call_function allocate stack space for a struct return? */\r
-/* gcc_p unused */\r
-static int\r
-mn10300_use_struct_convention (int gcc_p, struct type *type)\r
-{\r
- /* Structures bigger than a pair of words can't be returned in\r
- registers. */\r
- if (TYPE_LENGTH (type) > 8)\r
- return 1;\r
-\r
- switch (TYPE_CODE (type))\r
- {\r
- case TYPE_CODE_STRUCT:\r
- case TYPE_CODE_UNION:\r
- /* Structures with a single field are handled as the field\r
- itself. */\r
- if (TYPE_NFIELDS (type) == 1)\r
- return mn10300_use_struct_convention (gcc_p, \r
- TYPE_FIELD_TYPE (type, 0));\r
-\r
- /* Structures with word or double-word size are passed in memory, as\r
- long as they require at least word alignment. */\r
- if (mn10300_type_align (type) >= 4)\r
- return 0;\r
-\r
- return 1;\r
-\r
- /* Arrays are addressable, so they're never returned in\r
- registers. This condition can only hold when the array is\r
- the only field of a struct or union. */\r
- case TYPE_CODE_ARRAY:\r
- return 1;\r
-\r
- case TYPE_CODE_TYPEDEF:\r
- return mn10300_use_struct_convention (gcc_p, check_typedef (type));\r
-\r
- default:\r
- return 0;\r
- }\r
-}\r
-\r
-/* MVS note this is deprecated. */\r
-static void\r
-mn10300_store_return_value (struct type *type,\r
- struct regcache *regcache, const void *valbuf)\r
-{\r
- struct gdbarch *gdbarch = get_regcache_arch (regcache);\r
- int len = TYPE_LENGTH (type);\r
- int reg, regsz;\r
- \r
- if (TYPE_CODE (type) == TYPE_CODE_PTR)\r
- reg = 4;\r
- else\r
- reg = 0;\r
-\r
- regsz = register_size (gdbarch, reg);\r
-\r
- if (len <= regsz)\r
- regcache_raw_write_part (regcache, reg, 0, len, valbuf);\r
- else if (len <= 2 * regsz)\r
- {\r
- regcache_raw_write (regcache, reg, valbuf);\r
- gdb_assert (regsz == register_size (gdbarch, reg + 1));\r
- regcache_raw_write_part (regcache, reg+1, 0,\r
- len - regsz, (char *) valbuf + regsz);\r
- }\r
- else\r
- internal_error (__FILE__, __LINE__,\r
- _("Cannot store return value %d bytes long."), len);\r
-}\r
-\r
-/* MVS note deprecated. */\r
-static void\r
-mn10300_extract_return_value (struct type *type,\r
- struct regcache *regcache, void *valbuf)\r
-{\r
- struct gdbarch *gdbarch = get_regcache_arch (regcache);\r
- char buf[MAX_REGISTER_SIZE];\r
- int len = TYPE_LENGTH (type);\r
- int reg, regsz;\r
-\r
- if (TYPE_CODE (type) == TYPE_CODE_PTR)\r
- reg = 4;\r
- else\r
- reg = 0;\r
-\r
- regsz = register_size (gdbarch, reg);\r
- if (len <= regsz)\r
- {\r
- regcache_raw_read (regcache, reg, buf);\r
- memcpy (valbuf, buf, len);\r
- }\r
- else if (len <= 2 * regsz)\r
- {\r
- regcache_raw_read (regcache, reg, buf);\r
- memcpy (valbuf, buf, regsz);\r
- gdb_assert (regsz == register_size (gdbarch, reg + 1));\r
- regcache_raw_read (regcache, reg + 1, buf);\r
- memcpy ((char *) valbuf + regsz, buf, len - regsz);\r
- }\r
- else\r
- internal_error (__FILE__, __LINE__,\r
- _("Cannot extract return value %d bytes long."), len);\r
-}\r
-\r
-static char *\r
-register_name (int reg, char **regs, long sizeof_regs)\r
-{\r
- if (reg < 0 || reg >= sizeof_regs / sizeof (regs[0]))\r
- return NULL;\r
- else\r
- return regs[reg];\r
-}\r
-\r
-static const char *\r
-mn10300_generic_register_name (int reg)\r
-{\r
- static char *regs[] =\r
- { "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",\r
- "sp", "pc", "mdr", "psw", "lir", "lar", "", "",\r
- "", "", "", "", "", "", "", "",\r
- "", "", "", "", "", "", "", "fp"\r
- };\r
- return register_name (reg, regs, sizeof regs);\r
-}\r
-\r
-\r
-static const char *\r
-am33_register_name (int reg)\r
-{\r
- static char *regs[] =\r
- { "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",\r
- "sp", "pc", "mdr", "psw", "lir", "lar", "",\r
- "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",\r
- "ssp", "msp", "usp", "mcrh", "mcrl", "mcvf", "", "", ""\r
- };\r
- return register_name (reg, regs, sizeof regs);\r
-}\r
-\r
-\r
-static struct type *\r
-mn10300_register_type (struct gdbarch *gdbarch, int reg)\r
-{\r
- return builtin_type_int;\r
-}\r
-\r
-static CORE_ADDR\r
-mn10300_read_pc (ptid_t ptid)\r
-{\r
- return read_register_pid (E_PC_REGNUM, ptid);\r
-}\r
-\r
-static void\r
-mn10300_write_pc (CORE_ADDR val, ptid_t ptid)\r
-{\r
- return write_register_pid (E_PC_REGNUM, val, ptid);\r
-}\r
-\r
-/* The breakpoint instruction must be the same size as the smallest\r
- instruction in the instruction set.\r
-\r
- The Matsushita mn10x00 processors have single byte instructions\r
- so we need a single byte breakpoint. Matsushita hasn't defined\r
- one, so we defined it ourselves. */\r
-\r
-const static unsigned char *\r
-mn10300_breakpoint_from_pc (CORE_ADDR *bp_addr, int *bp_size)\r
-{\r
- static char breakpoint[] = {0xff};\r
- *bp_size = 1;\r
- return breakpoint;\r
-}\r
-\r
-/* Function: skip_prologue\r
- Return the address of the first inst past the prologue of the function. */\r
-\r
-static CORE_ADDR\r
-mn10300_skip_prologue (CORE_ADDR pc)\r
-{\r
- /* FIXME: not implemented. */\r
- /* First approximation, try simply using skip_prologue_using_sal. */\r
- return skip_prologue_using_sal (pc);\r
-}\r
-\r
-/* Simple frame_unwind_cache. \r
- This finds the "extra info" for the frame. */\r
-struct trad_frame_cache *\r
-mn10300_frame_unwind_cache (struct frame_info *next_frame,\r
- void **this_prologue_cache)\r
-{\r
- struct trad_frame_cache *cache;\r
-\r
- if (*this_prologue_cache)\r
- return (*this_prologue_cache);\r
-\r
- cache = trad_frame_cache_zalloc (next_frame);\r
- trad_frame_set_id (cache, \r
- frame_id_build (gdbarch_unwind_sp (current_gdbarch,\r
- next_frame),\r
- gdbarch_unwind_pc (current_gdbarch,\r
- next_frame)));\r
-\r
- /* FIXME: The SP isn't the frame base, so this is 0th approximation. */\r
- /* FIXME: The A3 reg isn't always the frame register either, so this\r
- is 1st approximation. */\r
- trad_frame_set_this_base (cache, \r
- frame_unwind_register_signed (next_frame, \r
- E_A3_REGNUM));\r
- (*this_prologue_cache) = cache;\r
- return cache;\r
-}\r
-\r
-/* Here is a dummy implementation. */\r
-static struct frame_id\r
-mn10300_dummy_unwind_dummy_id (struct gdbarch *gdbarch,\r
- struct frame_info *next_frame)\r
-{\r
- return frame_id_build (0, 0);\r
-}\r
-\r
-/* Trad frame implementation. */\r
-static void\r
-mn10300_frame_this_id (struct frame_info *next_frame,\r
- void **this_prologue_cache,\r
- struct frame_id *this_id)\r
-{\r
- struct trad_frame_cache *cache = \r
- mn10300_frame_unwind_cache (next_frame, this_prologue_cache);\r
-\r
- trad_frame_get_id (cache, this_id);\r
-}\r
-\r
-static void\r
-mn10300_frame_prev_register (struct frame_info *next_frame,\r
- void **this_prologue_cache,\r
- int regnum, int *optimizedp,\r
- enum lval_type *lvalp, CORE_ADDR *addrp,\r
- int *realnump, void *bufferp)\r
-{\r
- struct trad_frame_cache *cache =\r
- mn10300_frame_unwind_cache (next_frame, this_prologue_cache);\r
-\r
- trad_frame_get_register (cache, next_frame, regnum, optimizedp, \r
- lvalp, addrp, realnump, bufferp);\r
- /* Or...\r
- trad_frame_get_prev_register (next_frame, cache->prev_regs, regnum, \r
- optimizedp, lvalp, addrp, realnump, bufferp);\r
- */\r
-}\r
-\r
-static const struct frame_unwind mn10300_frame_unwind = {\r
- NORMAL_FRAME,\r
- mn10300_frame_this_id, \r
- mn10300_frame_prev_register\r
-};\r
-\r
-static CORE_ADDR\r
-mn10300_frame_base_address (struct frame_info *next_frame,\r
- void **this_prologue_cache)\r
-{\r
- struct trad_frame_cache *cache = \r
- mn10300_frame_unwind_cache (next_frame, this_prologue_cache);\r
-\r
- return trad_frame_get_this_base (cache);\r
-}\r
-\r
-static const struct frame_unwind *\r
-mn10300_frame_sniffer (struct frame_info *next_frame)\r
-{\r
- return &mn10300_frame_unwind;\r
-}\r
-\r
-static const struct frame_base mn10300_frame_base = {\r
- &mn10300_frame_unwind, \r
- mn10300_frame_base_address, \r
- mn10300_frame_base_address,\r
- mn10300_frame_base_address\r
-};\r
-\r
-static CORE_ADDR\r
-mn10300_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)\r
-{\r
- ULONGEST pc;\r
-\r
- frame_unwind_unsigned_register (next_frame, E_PC_REGNUM, &pc);\r
- return pc;\r
-}\r
-\r
-static CORE_ADDR\r
-mn10300_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)\r
-{\r
- ULONGEST sp;\r
-\r
- frame_unwind_unsigned_register (next_frame, E_SP_REGNUM, &sp);\r
- return sp;\r
-}\r
-\r
-static void\r
-mn10300_frame_unwind_init (struct gdbarch *gdbarch)\r
-{\r
- frame_unwind_append_sniffer (gdbarch, dwarf2_frame_sniffer);\r
- frame_unwind_append_sniffer (gdbarch, mn10300_frame_sniffer);\r
- frame_base_set_default (gdbarch, &mn10300_frame_base);\r
- set_gdbarch_unwind_dummy_id (gdbarch, mn10300_dummy_unwind_dummy_id);\r
- set_gdbarch_unwind_pc (gdbarch, mn10300_unwind_pc);\r
- set_gdbarch_unwind_sp (gdbarch, mn10300_unwind_sp);\r
-}\r
-\r
-/* Dump out the mn10300 specific architecture information. */\r
-\r
-static void\r
-mn10300_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file)\r
-{\r
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);\r
- fprintf_unfiltered (file, "mn10300_dump_tdep: am33_mode = %d\n",\r
- tdep->am33_mode);\r
-}\r
-\r
-static struct gdbarch *\r
-mn10300_gdbarch_init (struct gdbarch_info info,\r
- struct gdbarch_list *arches)\r
-{\r
- struct gdbarch *gdbarch;\r
- struct gdbarch_tdep *tdep;\r
-\r
- arches = gdbarch_list_lookup_by_info (arches, &info);\r
- if (arches != NULL)\r
- return arches->gdbarch;\r
-\r
- tdep = xmalloc (sizeof (struct gdbarch_tdep));\r
- gdbarch = gdbarch_alloc (&info, tdep);\r
-\r
- switch (info.bfd_arch_info->mach)\r
- {\r
- case 0:\r
- case bfd_mach_mn10300:\r
- set_gdbarch_register_name (gdbarch, mn10300_generic_register_name);\r
- tdep->am33_mode = 0;\r
- break;\r
- case bfd_mach_am33:\r
- set_gdbarch_register_name (gdbarch, am33_register_name);\r
- tdep->am33_mode = 1;\r
- break;\r
- default:\r
- internal_error (__FILE__, __LINE__,\r
- _("mn10300_gdbarch_init: Unknown mn10300 variant"));\r
- break;\r
- }\r
-\r
- /* Registers. */\r
- set_gdbarch_num_regs (gdbarch, E_NUM_REGS);\r
- set_gdbarch_register_type (gdbarch, mn10300_register_type);\r
- set_gdbarch_skip_prologue (gdbarch, mn10300_skip_prologue);\r
- set_gdbarch_read_pc (gdbarch, mn10300_read_pc);\r
- set_gdbarch_write_pc (gdbarch, mn10300_write_pc);\r
- set_gdbarch_pc_regnum (gdbarch, E_PC_REGNUM);\r
- set_gdbarch_sp_regnum (gdbarch, E_SP_REGNUM);\r
-\r
- /* Stack unwinding. */\r
- set_gdbarch_inner_than (gdbarch, core_addr_lessthan);\r
- /* Breakpoints. */\r
- set_gdbarch_breakpoint_from_pc (gdbarch, mn10300_breakpoint_from_pc);\r
- /* decr_pc_after_break? */\r
- /* Disassembly. */\r
- set_gdbarch_print_insn (gdbarch, print_insn_mn10300);\r
-\r
- /* Stage 2 */\r
- /* MVS Note: at least the first one is deprecated! */\r
- set_gdbarch_deprecated_use_struct_convention (gdbarch, \r
- mn10300_use_struct_convention);\r
- set_gdbarch_store_return_value (gdbarch, mn10300_store_return_value);\r
- set_gdbarch_extract_return_value (gdbarch, mn10300_extract_return_value);\r
-\r
- mn10300_frame_unwind_init (gdbarch);\r
-\r
- return gdbarch;\r
-}\r
- \r
-void\r
-_initialize_mn10300_tdep (void)\r
-{\r
- gdbarch_register (bfd_arch_mn10300, mn10300_gdbarch_init, mn10300_dump_tdep);\r
-}\r
-\r
+/* Target-dependent code for the Matsushita MN10300 for GDB, the GNU debugger.
+
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+ 2007 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
+
+#include "defs.h"
+#include "arch-utils.h"
+#include "dis-asm.h"
+#include "gdbtypes.h"
+#include "regcache.h"
+#include "gdb_string.h"
+#include "gdb_assert.h"
+#include "gdbcore.h" /* for write_memory_unsigned_integer */
+#include "value.h"
+#include "gdbtypes.h"
+#include "frame.h"
+#include "frame-unwind.h"
+#include "frame-base.h"
+#include "trad-frame.h"
+#include "symtab.h"
+#include "dwarf2-frame.h"
+#include "osabi.h"
+
+#include "mn10300-tdep.h"
+
+/* Forward decl. */
+extern struct trad_frame_cache *mn10300_frame_unwind_cache (struct frame_info*,
+ void **);
+
+/* Compute the alignment required by a type. */
+
+static int
+mn10300_type_align (struct type *type)
+{
+ int i, align = 1;
+
+ switch (TYPE_CODE (type))
+ {
+ case TYPE_CODE_INT:
+ case TYPE_CODE_ENUM:
+ case TYPE_CODE_SET:
+ case TYPE_CODE_RANGE:
+ case TYPE_CODE_CHAR:
+ case TYPE_CODE_BOOL:
+ case TYPE_CODE_FLT:
+ case TYPE_CODE_PTR:
+ case TYPE_CODE_REF:
+ return TYPE_LENGTH (type);
+
+ case TYPE_CODE_COMPLEX:
+ return TYPE_LENGTH (type) / 2;
+
+ case TYPE_CODE_STRUCT:
+ case TYPE_CODE_UNION:
+ for (i = 0; i < TYPE_NFIELDS (type); i++)
+ {
+ int falign = mn10300_type_align (TYPE_FIELD_TYPE (type, i));
+ while (align < falign)
+ align <<= 1;
+ }
+ return align;
+
+ case TYPE_CODE_ARRAY:
+ /* HACK! Structures containing arrays, even small ones, are not
+ elligible for returning in registers. */
+ return 256;
+
+ case TYPE_CODE_TYPEDEF:
+ return mn10300_type_align (check_typedef (type));
+
+ default:
+ internal_error (__FILE__, __LINE__, _("bad switch"));
+ }
+}
+
+/* Should call_function allocate stack space for a struct return? */
+static int
+mn10300_use_struct_convention (struct type *type)
+{
+ /* Structures bigger than a pair of words can't be returned in
+ registers. */
+ if (TYPE_LENGTH (type) > 8)
+ return 1;
+
+ switch (TYPE_CODE (type))
+ {
+ case TYPE_CODE_STRUCT:
+ case TYPE_CODE_UNION:
+ /* Structures with a single field are handled as the field
+ itself. */
+ if (TYPE_NFIELDS (type) == 1)
+ return mn10300_use_struct_convention (TYPE_FIELD_TYPE (type, 0));
+
+ /* Structures with word or double-word size are passed in memory, as
+ long as they require at least word alignment. */
+ if (mn10300_type_align (type) >= 4)
+ return 0;
+
+ return 1;
+
+ /* Arrays are addressable, so they're never returned in
+ registers. This condition can only hold when the array is
+ the only field of a struct or union. */
+ case TYPE_CODE_ARRAY:
+ return 1;
+
+ case TYPE_CODE_TYPEDEF:
+ return mn10300_use_struct_convention (check_typedef (type));
+
+ default:
+ return 0;
+ }
+}
+
+static void
+mn10300_store_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache, const void *valbuf)
+{
+ int len = TYPE_LENGTH (type);
+ int reg, regsz;
+
+ if (TYPE_CODE (type) == TYPE_CODE_PTR)
+ reg = 4;
+ else
+ reg = 0;
+
+ regsz = register_size (gdbarch, reg);
+
+ if (len <= regsz)
+ regcache_raw_write_part (regcache, reg, 0, len, valbuf);
+ else if (len <= 2 * regsz)
+ {
+ regcache_raw_write (regcache, reg, valbuf);
+ gdb_assert (regsz == register_size (gdbarch, reg + 1));
+ regcache_raw_write_part (regcache, reg+1, 0,
+ len - regsz, (char *) valbuf + regsz);
+ }
+ else
+ internal_error (__FILE__, __LINE__,
+ _("Cannot store return value %d bytes long."), len);
+}
+
+static void
+mn10300_extract_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache, void *valbuf)
+{
+ char buf[MAX_REGISTER_SIZE];
+ int len = TYPE_LENGTH (type);
+ int reg, regsz;
+
+ if (TYPE_CODE (type) == TYPE_CODE_PTR)
+ reg = 4;
+ else
+ reg = 0;
+
+ regsz = register_size (gdbarch, reg);
+ if (len <= regsz)
+ {
+ regcache_raw_read (regcache, reg, buf);
+ memcpy (valbuf, buf, len);
+ }
+ else if (len <= 2 * regsz)
+ {
+ regcache_raw_read (regcache, reg, buf);
+ memcpy (valbuf, buf, regsz);
+ gdb_assert (regsz == register_size (gdbarch, reg + 1));
+ regcache_raw_read (regcache, reg + 1, buf);
+ memcpy ((char *) valbuf + regsz, buf, len - regsz);
+ }
+ else
+ internal_error (__FILE__, __LINE__,
+ _("Cannot extract return value %d bytes long."), len);
+}
+
+/* Determine, for architecture GDBARCH, how a return value of TYPE
+ should be returned. If it is supposed to be returned in registers,
+ and READBUF is non-zero, read the appropriate value from REGCACHE,
+ and copy it into READBUF. If WRITEBUF is non-zero, write the value
+ from WRITEBUF into REGCACHE. */
+
+static enum return_value_convention
+mn10300_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache, gdb_byte *readbuf,
+ const gdb_byte *writebuf)
+{
+ if (mn10300_use_struct_convention (type))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+
+ if (readbuf)
+ mn10300_extract_return_value (gdbarch, type, regcache, readbuf);
+ if (writebuf)
+ mn10300_store_return_value (gdbarch, type, regcache, writebuf);
+
+ return RETURN_VALUE_REGISTER_CONVENTION;
+}
+
+static char *
+register_name (int reg, char **regs, long sizeof_regs)
+{
+ if (reg < 0 || reg >= sizeof_regs / sizeof (regs[0]))
+ return NULL;
+ else
+ return regs[reg];
+}
+
+static const char *
+mn10300_generic_register_name (int reg)
+{
+ static char *regs[] =
+ { "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",
+ "sp", "pc", "mdr", "psw", "lir", "lar", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "fp"
+ };
+ return register_name (reg, regs, sizeof regs);
+}
+
+
+static const char *
+am33_register_name (int reg)
+{
+ static char *regs[] =
+ { "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",
+ "sp", "pc", "mdr", "psw", "lir", "lar", "",
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "ssp", "msp", "usp", "mcrh", "mcrl", "mcvf", "", "", ""
+ };
+ return register_name (reg, regs, sizeof regs);
+}
+
+static const char *
+am33_2_register_name (int reg)
+{
+ static char *regs[] =
+ {
+ "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",
+ "sp", "pc", "mdr", "psw", "lir", "lar", "mdrq", "r0",
+ "r1", "r2", "r3", "r4", "r5", "r6", "r7", "ssp",
+ "msp", "usp", "mcrh", "mcrl", "mcvf", "fpcr", "", "",
+ "fs0", "fs1", "fs2", "fs3", "fs4", "fs5", "fs6", "fs7",
+ "fs8", "fs9", "fs10", "fs11", "fs12", "fs13", "fs14", "fs15",
+ "fs16", "fs17", "fs18", "fs19", "fs20", "fs21", "fs22", "fs23",
+ "fs24", "fs25", "fs26", "fs27", "fs28", "fs29", "fs30", "fs31"
+ };
+ return register_name (reg, regs, sizeof regs);
+}
+
+static struct type *
+mn10300_register_type (struct gdbarch *gdbarch, int reg)
+{
+ return builtin_type_int;
+}
+
+static CORE_ADDR
+mn10300_read_pc (struct regcache *regcache)
+{
+ ULONGEST val;
+ regcache_cooked_read_unsigned (regcache, E_PC_REGNUM, &val);
+ return val;
+}
+
+static void
+mn10300_write_pc (struct regcache *regcache, CORE_ADDR val)
+{
+ regcache_cooked_write_unsigned (regcache, E_PC_REGNUM, val);
+}
+
+/* The breakpoint instruction must be the same size as the smallest
+ instruction in the instruction set.
+
+ The Matsushita mn10x00 processors have single byte instructions
+ so we need a single byte breakpoint. Matsushita hasn't defined
+ one, so we defined it ourselves. */
+
+const static unsigned char *
+mn10300_breakpoint_from_pc (CORE_ADDR *bp_addr, int *bp_size)
+{
+ static char breakpoint[] = {0xff};
+ *bp_size = 1;
+ return breakpoint;
+}
+
+/* Set offsets of saved registers.
+ This is a helper function for mn10300_analyze_prologue. */
+
+static void
+set_reg_offsets (struct frame_info *fi,
+ void **this_cache,
+ int movm_args,
+ int fpregmask,
+ int stack_extra_size,
+ int frame_in_fp)
+{
+ struct trad_frame_cache *cache;
+ int offset = 0;
+ CORE_ADDR base;
+
+ if (fi == NULL || this_cache == NULL)
+ return;
+
+ cache = mn10300_frame_unwind_cache (fi, this_cache);
+ if (cache == NULL)
+ return;
+
+ if (frame_in_fp)
+ {
+ base = frame_unwind_register_unsigned (fi, E_A3_REGNUM);
+ }
+ else
+ {
+ base = frame_unwind_register_unsigned (fi, E_SP_REGNUM) + stack_extra_size;
+ }
+
+ trad_frame_set_this_base (cache, base);
+
+ if (AM33_MODE == 2)
+ {
+ /* If bit N is set in fpregmask, fsN is saved on the stack.
+ The floating point registers are saved in ascending order.
+ For example: fs16 <- Frame Pointer
+ fs17 Frame Pointer + 4 */
+ if (fpregmask != 0)
+ {
+ int i;
+ for (i = 0; i < 32; i++)
+ {
+ if (fpregmask & (1 << i))
+ {
+ trad_frame_set_reg_addr (cache, E_FS0_REGNUM + i, base + offset);
+ offset += 4;
+ }
+ }
+ }
+ }
+
+
+ if (movm_args & movm_other_bit)
+ {
+ /* The `other' bit leaves a blank area of four bytes at the
+ beginning of its block of saved registers, making it 32 bytes
+ long in total. */
+ trad_frame_set_reg_addr (cache, E_LAR_REGNUM, base + offset + 4);
+ trad_frame_set_reg_addr (cache, E_LIR_REGNUM, base + offset + 8);
+ trad_frame_set_reg_addr (cache, E_MDR_REGNUM, base + offset + 12);
+ trad_frame_set_reg_addr (cache, E_A0_REGNUM + 1, base + offset + 16);
+ trad_frame_set_reg_addr (cache, E_A0_REGNUM, base + offset + 20);
+ trad_frame_set_reg_addr (cache, E_D0_REGNUM + 1, base + offset + 24);
+ trad_frame_set_reg_addr (cache, E_D0_REGNUM, base + offset + 28);
+ offset += 32;
+ }
+
+ if (movm_args & movm_a3_bit)
+ {
+ trad_frame_set_reg_addr (cache, E_A3_REGNUM, base + offset);
+ offset += 4;
+ }
+ if (movm_args & movm_a2_bit)
+ {
+ trad_frame_set_reg_addr (cache, E_A2_REGNUM, base + offset);
+ offset += 4;
+ }
+ if (movm_args & movm_d3_bit)
+ {
+ trad_frame_set_reg_addr (cache, E_D3_REGNUM, base + offset);
+ offset += 4;
+ }
+ if (movm_args & movm_d2_bit)
+ {
+ trad_frame_set_reg_addr (cache, E_D2_REGNUM, base + offset);
+ offset += 4;
+ }
+ if (AM33_MODE)
+ {
+ if (movm_args & movm_exother_bit)
+ {
+ trad_frame_set_reg_addr (cache, E_MCVF_REGNUM, base + offset);
+ trad_frame_set_reg_addr (cache, E_MCRL_REGNUM, base + offset + 4);
+ trad_frame_set_reg_addr (cache, E_MCRH_REGNUM, base + offset + 8);
+ trad_frame_set_reg_addr (cache, E_MDRQ_REGNUM, base + offset + 12);
+ trad_frame_set_reg_addr (cache, E_E1_REGNUM, base + offset + 16);
+ trad_frame_set_reg_addr (cache, E_E0_REGNUM, base + offset + 20);
+ offset += 24;
+ }
+ if (movm_args & movm_exreg1_bit)
+ {
+ trad_frame_set_reg_addr (cache, E_E7_REGNUM, base + offset);
+ trad_frame_set_reg_addr (cache, E_E6_REGNUM, base + offset + 4);
+ trad_frame_set_reg_addr (cache, E_E5_REGNUM, base + offset + 8);
+ trad_frame_set_reg_addr (cache, E_E4_REGNUM, base + offset + 12);
+ offset += 16;
+ }
+ if (movm_args & movm_exreg0_bit)
+ {
+ trad_frame_set_reg_addr (cache, E_E3_REGNUM, base + offset);
+ trad_frame_set_reg_addr (cache, E_E2_REGNUM, base + offset + 4);
+ offset += 8;
+ }
+ }
+ /* The last (or first) thing on the stack will be the PC. */
+ trad_frame_set_reg_addr (cache, E_PC_REGNUM, base + offset);
+ /* Save the SP in the 'traditional' way.
+ This will be the same location where the PC is saved. */
+ trad_frame_set_reg_value (cache, E_SP_REGNUM, base + offset);
+}
+
+/* The main purpose of this file is dealing with prologues to extract
+ information about stack frames and saved registers.
+
+ In gcc/config/mn13000/mn10300.c, the expand_prologue prologue
+ function is pretty readable, and has a nice explanation of how the
+ prologue is generated. The prologues generated by that code will
+ have the following form (NOTE: the current code doesn't handle all
+ this!):
+
+ + If this is an old-style varargs function, then its arguments
+ need to be flushed back to the stack:
+
+ mov d0,(4,sp)
+ mov d1,(4,sp)
+
+ + If we use any of the callee-saved registers, save them now.
+
+ movm [some callee-saved registers],(sp)
+
+ + If we have any floating-point registers to save:
+
+ - Decrement the stack pointer to reserve space for the registers.
+ If the function doesn't need a frame pointer, we may combine
+ this with the adjustment that reserves space for the frame.
+
+ add -SIZE, sp
+
+ - Save the floating-point registers. We have two possible
+ strategies:
+
+ . Save them at fixed offset from the SP:
+
+ fmov fsN,(OFFSETN,sp)
+ fmov fsM,(OFFSETM,sp)
+ ...
+
+ Note that, if OFFSETN happens to be zero, you'll get the
+ different opcode: fmov fsN,(sp)
+
+ . Or, set a0 to the start of the save area, and then use
+ post-increment addressing to save the FP registers.
+
+ mov sp, a0
+ add SIZE, a0
+ fmov fsN,(a0+)
+ fmov fsM,(a0+)
+ ...
+
+ + If the function needs a frame pointer, we set it here.
+
+ mov sp, a3
+
+ + Now we reserve space for the stack frame proper. This could be
+ merged into the `add -SIZE, sp' instruction for FP saves up
+ above, unless we needed to set the frame pointer in the previous
+ step, or the frame is so large that allocating the whole thing at
+ once would put the FP register save slots out of reach of the
+ addressing mode (128 bytes).
+
+ add -SIZE, sp
+
+ One day we might keep the stack pointer constant, that won't
+ change the code for prologues, but it will make the frame
+ pointerless case much more common. */
+
+/* Analyze the prologue to determine where registers are saved,
+ the end of the prologue, etc etc. Return the end of the prologue
+ scanned.
+
+ We store into FI (if non-null) several tidbits of information:
+
+ * stack_size -- size of this stack frame. Note that if we stop in
+ certain parts of the prologue/epilogue we may claim the size of the
+ current frame is zero. This happens when the current frame has
+ not been allocated yet or has already been deallocated.
+
+ * fsr -- Addresses of registers saved in the stack by this frame.
+
+ * status -- A (relatively) generic status indicator. It's a bitmask
+ with the following bits:
+
+ MY_FRAME_IN_SP: The base of the current frame is actually in
+ the stack pointer. This can happen for frame pointerless
+ functions, or cases where we're stopped in the prologue/epilogue
+ itself. For these cases mn10300_analyze_prologue will need up
+ update fi->frame before returning or analyzing the register
+ save instructions.
+
+ MY_FRAME_IN_FP: The base of the current frame is in the
+ frame pointer register ($a3).
+
+ NO_MORE_FRAMES: Set this if the current frame is "start" or
+ if the first instruction looks like mov <imm>,sp. This tells
+ frame chain to not bother trying to unwind past this frame. */
+
+static CORE_ADDR
+mn10300_analyze_prologue (struct frame_info *fi,
+ void **this_cache,
+ CORE_ADDR pc)
+{
+ CORE_ADDR func_addr, func_end, addr, stop;
+ long stack_extra_size = 0;
+ int imm_size;
+ unsigned char buf[4];
+ int status;
+ int movm_args = 0;
+ int fpregmask = 0;
+ char *name;
+ int frame_in_fp = 0;
+
+ /* Use the PC in the frame if it's provided to look up the
+ start of this function.
+
+ Note: kevinb/2003-07-16: We used to do the following here:
+ pc = (fi ? get_frame_pc (fi) : pc);
+ But this is (now) badly broken when called from analyze_dummy_frame().
+ */
+ if (fi)
+ {
+ pc = (pc ? pc : get_frame_pc (fi));
+ }
+
+ /* Find the start of this function. */
+ status = find_pc_partial_function (pc, &name, &func_addr, &func_end);
+
+ /* Do nothing if we couldn't find the start of this function
+
+ MVS: comment went on to say "or if we're stopped at the first
+ instruction in the prologue" -- but code doesn't reflect that,
+ and I don't want to do that anyway. */
+ if (status == 0)
+ {
+ addr = pc;
+ goto finish_prologue;
+ }
+
+ /* If we're in start, then give up. */
+ if (strcmp (name, "start") == 0)
+ {
+ addr = pc;
+ goto finish_prologue;
+ }
+
+ /* Figure out where to stop scanning. */
+ stop = fi ? pc : func_end;
+
+ /* Don't walk off the end of the function. */
+ stop = stop > func_end ? func_end : stop;
+
+ /* Start scanning on the first instruction of this function. */
+ addr = func_addr;
+
+ /* Suck in two bytes. */
+ if (addr + 2 > stop || !safe_frame_unwind_memory (fi, addr, buf, 2))
+ goto finish_prologue;
+
+ /* First see if this insn sets the stack pointer from a register; if
+ so, it's probably the initialization of the stack pointer in _start,
+ so mark this as the bottom-most frame. */
+ if (buf[0] == 0xf2 && (buf[1] & 0xf3) == 0xf0)
+ {
+ goto finish_prologue;
+ }
+
+ /* Now look for movm [regs],sp, which saves the callee saved registers.
+
+ At this time we don't know if fi->frame is valid, so we only note
+ that we encountered a movm instruction. Later, we'll set the entries
+ in fsr.regs as needed. */
+ if (buf[0] == 0xcf)
+ {
+ /* Extract the register list for the movm instruction. */
+ movm_args = buf[1];
+
+ addr += 2;
+
+ /* Quit now if we're beyond the stop point. */
+ if (addr >= stop)
+ goto finish_prologue;
+
+ /* Get the next two bytes so the prologue scan can continue. */
+ if (!safe_frame_unwind_memory (fi, addr, buf, 2))
+ goto finish_prologue;
+ }
+
+ if (AM33_MODE == 2)
+ {
+ /* Determine if any floating point registers are to be saved.
+ Look for one of the following three prologue formats:
+
+ [movm [regs],(sp)] [movm [regs],(sp)] [movm [regs],(sp)]
+
+ add -SIZE,sp add -SIZE,sp add -SIZE,sp
+ fmov fs#,(sp) mov sp,a0/a1 mov sp,a0/a1
+ fmov fs#,(#,sp) fmov fs#,(a0/a1+) add SIZE2,a0/a1
+ ... ... fmov fs#,(a0/a1+)
+ ... ... ...
+ fmov fs#,(#,sp) fmov fs#,(a0/a1+) fmov fs#,(a0/a1+)
+
+ [mov sp,a3] [mov sp,a3]
+ [add -SIZE2,sp] [add -SIZE2,sp] */
+
+ /* Remember the address at which we started in the event that we
+ don't ultimately find an fmov instruction. Once we're certain
+ that we matched one of the above patterns, we'll set
+ ``restore_addr'' to the appropriate value. Note: At one time
+ in the past, this code attempted to not adjust ``addr'' until
+ there was a fair degree of certainty that the pattern would be
+ matched. However, that code did not wait until an fmov instruction
+ was actually encountered. As a consequence, ``addr'' would
+ sometimes be advanced even when no fmov instructions were found. */
+ CORE_ADDR restore_addr = addr;
+
+ /* First, look for add -SIZE,sp (i.e. add imm8,sp (0xf8feXX)
+ or add imm16,sp (0xfafeXXXX)
+ or add imm32,sp (0xfcfeXXXXXXXX)) */
+ imm_size = 0;
+ if (buf[0] == 0xf8 && buf[1] == 0xfe)
+ imm_size = 1;
+ else if (buf[0] == 0xfa && buf[1] == 0xfe)
+ imm_size = 2;
+ else if (buf[0] == 0xfc && buf[1] == 0xfe)
+ imm_size = 4;
+ if (imm_size != 0)
+ {
+ /* An "add -#,sp" instruction has been found. "addr + 2 + imm_size"
+ is the address of the next instruction. Don't modify "addr" until
+ the next "floating point prologue" instruction is found. If this
+ is not a prologue that saves floating point registers we need to
+ be able to back out of this bit of code and continue with the
+ prologue analysis. */
+ if (addr + 2 + imm_size < stop)
+ {
+ if (!safe_frame_unwind_memory (fi, addr + 2 + imm_size, buf, 3))
+ goto finish_prologue;
+ if ((buf[0] & 0xfc) == 0x3c)
+ {
+ /* Occasionally, especially with C++ code, the "fmov"
+ instructions will be preceded by "mov sp,aN"
+ (aN => a0, a1, a2, or a3).
+
+ This is a one byte instruction: mov sp,aN = 0011 11XX
+ where XX is the register number.
+
+ Skip this instruction by incrementing addr. The "fmov"
+ instructions will have the form "fmov fs#,(aN+)" in this
+ case, but that will not necessitate a change in the
+ "fmov" parsing logic below. */
+
+ addr++;
+
+ if ((buf[1] & 0xfc) == 0x20)
+ {
+ /* Occasionally, especially with C++ code compiled with
+ the -fomit-frame-pointer or -O3 options, the
+ "mov sp,aN" instruction will be followed by an
+ "add #,aN" instruction. This indicates the
+ "stack_size", the size of the portion of the stack
+ containing the arguments. This instruction format is:
+ add #,aN = 0010 00XX YYYY YYYY
+ where XX is the register number
+ YYYY YYYY is the constant.
+ Note the size of the stack (as a negative number) in
+ the frame info structure. */
+ if (fi)
+ stack_extra_size += -buf[2];
+
+ addr += 2;
+ }
+ }
+
+ if ((buf[0] & 0xfc) == 0x3c ||
+ buf[0] == 0xf9 || buf[0] == 0xfb)
+ {
+ /* An "fmov" instruction has been found indicating that this
+ prologue saves floating point registers (or, as described
+ above, a "mov sp,aN" and possible "add #,aN" have been
+ found and we will assume an "fmov" follows). Process the
+ consecutive "fmov" instructions. */
+ for (addr += 2 + imm_size;;addr += imm_size)
+ {
+ int regnum;
+
+ /* Read the "fmov" instruction. */
+ if (addr >= stop ||
+ !safe_frame_unwind_memory (fi, addr, buf, 4))
+ goto finish_prologue;
+
+ if (buf[0] != 0xf9 && buf[0] != 0xfb)
+ break;
+
+ /* An fmov instruction has just been seen. We can
+ now really commit to the pattern match. Set the
+ address to restore at the end of this speculative
+ bit of code to the actually address that we've
+ been incrementing (or not) throughout the
+ speculation. */
+ restore_addr = addr;
+
+ /* Get the floating point register number from the
+ 2nd and 3rd bytes of the "fmov" instruction:
+ Machine Code: 0000 00X0 YYYY 0000 =>
+ Regnum: 000X YYYY */
+ regnum = (buf[1] & 0x02) << 3;
+ regnum |= ((buf[2] & 0xf0) >> 4) & 0x0f;
+
+ /* Add this register number to the bit mask of floating
+ point registers that have been saved. */
+ fpregmask |= 1 << regnum;
+
+ /* Determine the length of this "fmov" instruction.
+ fmov fs#,(sp) => 3 byte instruction
+ fmov fs#,(#,sp) => 4 byte instruction */
+ imm_size = (buf[0] == 0xf9) ? 3 : 4;
+ }
+ }
+ else
+ {
+ /* No "fmov" was found. Reread the two bytes at the original
+ "addr" to reset the state. */
+ addr = restore_addr;
+ if (!safe_frame_unwind_memory (fi, addr, buf, 2))
+ goto finish_prologue;
+ }
+ }
+ /* else the prologue consists entirely of an "add -SIZE,sp"
+ instruction. Handle this below. */
+ }
+ /* else no "add -SIZE,sp" was found indicating no floating point
+ registers are saved in this prologue. */
+
+ /* In the pattern match code contained within this block, `restore_addr'
+ is set to the starting address at the very beginning and then
+ iteratively to the next address to start scanning at once the
+ pattern match has succeeded. Thus `restore_addr' will contain
+ the address to rewind to if the pattern match failed. If the
+ match succeeded, `restore_addr' and `addr' will already have the
+ same value. */
+ addr = restore_addr;
+ }
+
+ /* Now see if we set up a frame pointer via "mov sp,a3" */
+ if (buf[0] == 0x3f)
+ {
+ addr += 1;
+
+ /* The frame pointer is now valid. */
+ if (fi)
+ {
+ frame_in_fp = 1;
+ }
+
+ /* Quit now if we're beyond the stop point. */
+ if (addr >= stop)
+ goto finish_prologue;
+
+ /* Get two more bytes so scanning can continue. */
+ if (!safe_frame_unwind_memory (fi, addr, buf, 2))
+ goto finish_prologue;
+ }
+
+ /* Next we should allocate the local frame. No more prologue insns
+ are found after allocating the local frame.
+
+ Search for add imm8,sp (0xf8feXX)
+ or add imm16,sp (0xfafeXXXX)
+ or add imm32,sp (0xfcfeXXXXXXXX).
+
+ If none of the above was found, then this prologue has no
+ additional stack. */
+
+ imm_size = 0;
+ if (buf[0] == 0xf8 && buf[1] == 0xfe)
+ imm_size = 1;
+ else if (buf[0] == 0xfa && buf[1] == 0xfe)
+ imm_size = 2;
+ else if (buf[0] == 0xfc && buf[1] == 0xfe)
+ imm_size = 4;
+
+ if (imm_size != 0)
+ {
+ /* Suck in imm_size more bytes, they'll hold the size of the
+ current frame. */
+ if (!safe_frame_unwind_memory (fi, addr + 2, buf, imm_size))
+ goto finish_prologue;
+
+ /* Note the size of the stack. */
+ stack_extra_size -= extract_signed_integer (buf, imm_size);
+
+ /* We just consumed 2 + imm_size bytes. */
+ addr += 2 + imm_size;
+
+ /* No more prologue insns follow, so begin preparation to return. */
+ goto finish_prologue;
+ }
+ /* Do the essentials and get out of here. */
+ finish_prologue:
+ /* Note if/where callee saved registers were saved. */
+ if (fi)
+ set_reg_offsets (fi, this_cache, movm_args, fpregmask, stack_extra_size, frame_in_fp);
+ return addr;
+}
+
+/* Function: skip_prologue
+ Return the address of the first inst past the prologue of the function. */
+
+static CORE_ADDR
+mn10300_skip_prologue (CORE_ADDR pc)
+{
+ return mn10300_analyze_prologue (NULL, NULL, pc);
+}
+
+/* Simple frame_unwind_cache.
+ This finds the "extra info" for the frame. */
+struct trad_frame_cache *
+mn10300_frame_unwind_cache (struct frame_info *next_frame,
+ void **this_prologue_cache)
+{
+ struct trad_frame_cache *cache;
+ CORE_ADDR pc, start, end;
+
+ if (*this_prologue_cache)
+ return (*this_prologue_cache);
+
+ cache = trad_frame_cache_zalloc (next_frame);
+ pc = gdbarch_unwind_pc (current_gdbarch, next_frame);
+ mn10300_analyze_prologue (next_frame, (void **) &cache, pc);
+ if (find_pc_partial_function (pc, NULL, &start, &end))
+ trad_frame_set_id (cache,
+ frame_id_build (trad_frame_get_this_base (cache),
+ start));
+ else
+ {
+ start = frame_func_unwind (next_frame, NORMAL_FRAME);
+ trad_frame_set_id (cache,
+ frame_id_build (trad_frame_get_this_base (cache),
+ start));
+ }
+
+ (*this_prologue_cache) = cache;
+ return cache;
+}
+
+/* Here is a dummy implementation. */
+static struct frame_id
+mn10300_unwind_dummy_id (struct gdbarch *gdbarch,
+ struct frame_info *next_frame)
+{
+ return frame_id_build (frame_sp_unwind (next_frame),
+ frame_pc_unwind (next_frame));
+}
+
+/* Trad frame implementation. */
+static void
+mn10300_frame_this_id (struct frame_info *next_frame,
+ void **this_prologue_cache,
+ struct frame_id *this_id)
+{
+ struct trad_frame_cache *cache =
+ mn10300_frame_unwind_cache (next_frame, this_prologue_cache);
+
+ trad_frame_get_id (cache, this_id);
+}
+
+static void
+mn10300_frame_prev_register (struct frame_info *next_frame,
+ void **this_prologue_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, gdb_byte *bufferp)
+{
+ struct trad_frame_cache *cache =
+ mn10300_frame_unwind_cache (next_frame, this_prologue_cache);
+
+ trad_frame_get_register (cache, next_frame, regnum, optimizedp,
+ lvalp, addrp, realnump, bufferp);
+ /* Or...
+ trad_frame_get_prev_register (next_frame, cache->prev_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, bufferp);
+ */
+}
+
+static const struct frame_unwind mn10300_frame_unwind = {
+ NORMAL_FRAME,
+ mn10300_frame_this_id,
+ mn10300_frame_prev_register
+};
+
+static CORE_ADDR
+mn10300_frame_base_address (struct frame_info *next_frame,
+ void **this_prologue_cache)
+{
+ struct trad_frame_cache *cache =
+ mn10300_frame_unwind_cache (next_frame, this_prologue_cache);
+
+ return trad_frame_get_this_base (cache);
+}
+
+static const struct frame_unwind *
+mn10300_frame_sniffer (struct frame_info *next_frame)
+{
+ return &mn10300_frame_unwind;
+}
+
+static const struct frame_base mn10300_frame_base = {
+ &mn10300_frame_unwind,
+ mn10300_frame_base_address,
+ mn10300_frame_base_address,
+ mn10300_frame_base_address
+};
+
+static CORE_ADDR
+mn10300_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ ULONGEST pc;
+
+ frame_unwind_unsigned_register (next_frame, E_PC_REGNUM, &pc);
+ return pc;
+}
+
+static CORE_ADDR
+mn10300_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ ULONGEST sp;
+
+ frame_unwind_unsigned_register (next_frame, E_SP_REGNUM, &sp);
+ return sp;
+}
+
+static void
+mn10300_frame_unwind_init (struct gdbarch *gdbarch)
+{
+ frame_unwind_append_sniffer (gdbarch, dwarf2_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, mn10300_frame_sniffer);
+ frame_base_set_default (gdbarch, &mn10300_frame_base);
+ set_gdbarch_unwind_dummy_id (gdbarch, mn10300_unwind_dummy_id);
+ set_gdbarch_unwind_pc (gdbarch, mn10300_unwind_pc);
+ set_gdbarch_unwind_sp (gdbarch, mn10300_unwind_sp);
+}
+
+/* Function: push_dummy_call
+ *
+ * Set up machine state for a target call, including
+ * function arguments, stack, return address, etc.
+ *
+ */
+
+static CORE_ADDR
+mn10300_push_dummy_call (struct gdbarch *gdbarch,
+ struct value *target_func,
+ struct regcache *regcache,
+ CORE_ADDR bp_addr,
+ int nargs, struct value **args,
+ CORE_ADDR sp,
+ int struct_return,
+ CORE_ADDR struct_addr)
+{
+ const int push_size = register_size (gdbarch, E_PC_REGNUM);
+ int regs_used;
+ int len, arg_len;
+ int stack_offset = 0;
+ int argnum;
+ char *val, valbuf[MAX_REGISTER_SIZE];
+
+ /* This should be a nop, but align the stack just in case something
+ went wrong. Stacks are four byte aligned on the mn10300. */
+ sp &= ~3;
+
+ /* Now make space on the stack for the args.
+
+ XXX This doesn't appear to handle pass-by-invisible reference
+ arguments. */
+ regs_used = struct_return ? 1 : 0;
+ for (len = 0, argnum = 0; argnum < nargs; argnum++)
+ {
+ arg_len = (TYPE_LENGTH (value_type (args[argnum])) + 3) & ~3;
+ while (regs_used < 2 && arg_len > 0)
+ {
+ regs_used++;
+ arg_len -= push_size;
+ }
+ len += arg_len;
+ }
+
+ /* Allocate stack space. */
+ sp -= len;
+
+ if (struct_return)
+ {
+ regs_used = 1;
+ regcache_cooked_write_unsigned (regcache, E_D0_REGNUM, struct_addr);
+ }
+ else
+ regs_used = 0;
+
+ /* Push all arguments onto the stack. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ /* FIXME what about structs? Unions? */
+ if (TYPE_CODE (value_type (*args)) == TYPE_CODE_STRUCT
+ && TYPE_LENGTH (value_type (*args)) > 8)
+ {
+ /* Change to pointer-to-type. */
+ arg_len = push_size;
+ store_unsigned_integer (valbuf, push_size,
+ VALUE_ADDRESS (*args));
+ val = &valbuf[0];
+ }
+ else
+ {
+ arg_len = TYPE_LENGTH (value_type (*args));
+ val = (char *) value_contents (*args);
+ }
+
+ while (regs_used < 2 && arg_len > 0)
+ {
+ regcache_cooked_write_unsigned (regcache, regs_used,
+ extract_unsigned_integer (val, push_size));
+ val += push_size;
+ arg_len -= push_size;
+ regs_used++;
+ }
+
+ while (arg_len > 0)
+ {
+ write_memory (sp + stack_offset, val, push_size);
+ arg_len -= push_size;
+ val += push_size;
+ stack_offset += push_size;
+ }
+
+ args++;
+ }
+
+ /* Make space for the flushback area. */
+ sp -= 8;
+
+ /* Push the return address that contains the magic breakpoint. */
+ sp -= 4;
+ write_memory_unsigned_integer (sp, push_size, bp_addr);
+
+ /* The CPU also writes the return address always into the
+ MDR register on "call". */
+ regcache_cooked_write_unsigned (regcache, E_MDR_REGNUM, bp_addr);
+
+ /* Update $sp. */
+ regcache_cooked_write_unsigned (regcache, E_SP_REGNUM, sp);
+ return sp;
+}
+
+/* If DWARF2 is a register number appearing in Dwarf2 debug info, then
+ mn10300_dwarf2_reg_to_regnum (DWARF2) is the corresponding GDB
+ register number. Why don't Dwarf2 and GDB use the same numbering?
+ Who knows? But since people have object files lying around with
+ the existing Dwarf2 numbering, and other people have written stubs
+ to work with the existing GDB, neither of them can change. So we
+ just have to cope. */
+static int
+mn10300_dwarf2_reg_to_regnum (int dwarf2)
+{
+ /* This table is supposed to be shaped like the gdbarch_register_name
+ initializer in gcc/config/mn10300/mn10300.h. Registers which
+ appear in GCC's numbering, but have no counterpart in GDB's
+ world, are marked with a -1. */
+ static int dwarf2_to_gdb[] = {
+ 0, 1, 2, 3, 4, 5, 6, 7, -1, 8,
+ 15, 16, 17, 18, 19, 20, 21, 22,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63
+ };
+
+ if (dwarf2 < 0
+ || dwarf2 >= ARRAY_SIZE (dwarf2_to_gdb)
+ || dwarf2_to_gdb[dwarf2] == -1)
+ {
+ warning (_("Bogus register number in debug info: %d"), dwarf2);
+ return 0;
+ }
+
+ return dwarf2_to_gdb[dwarf2];
+}
+
+static struct gdbarch *
+mn10300_gdbarch_init (struct gdbarch_info info,
+ struct gdbarch_list *arches)
+{
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int num_regs;
+
+ arches = gdbarch_list_lookup_by_info (arches, &info);
+ if (arches != NULL)
+ return arches->gdbarch;
+
+ tdep = xmalloc (sizeof (struct gdbarch_tdep));
+ gdbarch = gdbarch_alloc (&info, tdep);
+
+ switch (info.bfd_arch_info->mach)
+ {
+ case 0:
+ case bfd_mach_mn10300:
+ set_gdbarch_register_name (gdbarch, mn10300_generic_register_name);
+ tdep->am33_mode = 0;
+ num_regs = 32;
+ break;
+ case bfd_mach_am33:
+ set_gdbarch_register_name (gdbarch, am33_register_name);
+ tdep->am33_mode = 1;
+ num_regs = 32;
+ break;
+ case bfd_mach_am33_2:
+ set_gdbarch_register_name (gdbarch, am33_2_register_name);
+ tdep->am33_mode = 2;
+ num_regs = 64;
+ set_gdbarch_fp0_regnum (gdbarch, 32);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__,
+ _("mn10300_gdbarch_init: Unknown mn10300 variant"));
+ break;
+ }
+
+ /* Registers. */
+ set_gdbarch_num_regs (gdbarch, num_regs);
+ set_gdbarch_register_type (gdbarch, mn10300_register_type);
+ set_gdbarch_skip_prologue (gdbarch, mn10300_skip_prologue);
+ set_gdbarch_read_pc (gdbarch, mn10300_read_pc);
+ set_gdbarch_write_pc (gdbarch, mn10300_write_pc);
+ set_gdbarch_pc_regnum (gdbarch, E_PC_REGNUM);
+ set_gdbarch_sp_regnum (gdbarch, E_SP_REGNUM);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, mn10300_dwarf2_reg_to_regnum);
+
+ /* Stack unwinding. */
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+ /* Breakpoints. */
+ set_gdbarch_breakpoint_from_pc (gdbarch, mn10300_breakpoint_from_pc);
+ /* decr_pc_after_break? */
+ /* Disassembly. */
+ set_gdbarch_print_insn (gdbarch, print_insn_mn10300);
+
+ /* Stage 2 */
+ set_gdbarch_return_value (gdbarch, mn10300_return_value);
+
+ /* Stage 3 -- get target calls working. */
+ set_gdbarch_push_dummy_call (gdbarch, mn10300_push_dummy_call);
+ /* set_gdbarch_return_value (store, extract) */
+
+
+ mn10300_frame_unwind_init (gdbarch);
+
+ /* Hook in ABI-specific overrides, if they have been registered. */
+ gdbarch_init_osabi (info, gdbarch);
+
+ return gdbarch;
+}
+
+/* Dump out the mn10300 specific architecture information. */
+
+static void
+mn10300_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ fprintf_unfiltered (file, "mn10300_dump_tdep: am33_mode = %d\n",
+ tdep->am33_mode);
+}
+
+void
+_initialize_mn10300_tdep (void)
+{
+ gdbarch_register (bfd_arch_mn10300, mn10300_gdbarch_init, mn10300_dump_tdep);
+}
+