/* Target-dependent code for the Matsushita MN10300 for GDB, the GNU debugger.
- Copyright 1996, 1997 Free Software Foundation, Inc.
+ Copyright 1996, 1997, 1998, 1999, 2000, 2001
+ Free Software Foundation, Inc.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "frame.h"
#include "gdb_string.h"
#include "gdbcore.h"
#include "symfile.h"
+#include "regcache.h"
+#include "arch-utils.h"
+
+#define D0_REGNUM 0
+#define D2_REGNUM 2
+#define D3_REGNUM 3
+#define A0_REGNUM 4
+#define A2_REGNUM 6
+#define A3_REGNUM 7
+#define MDR_REGNUM 10
+#define PSW_REGNUM 11
+#define LIR_REGNUM 12
+#define LAR_REGNUM 13
+#define MDRQ_REGNUM 14
+#define E0_REGNUM 15
+#define MCRH_REGNUM 26
+#define MCRL_REGNUM 27
+#define MCVF_REGNUM 28
+
+enum movm_register_bits {
+ movm_exother_bit = 0x01,
+ movm_exreg1_bit = 0x02,
+ movm_exreg0_bit = 0x04,
+ movm_other_bit = 0x08,
+ movm_a3_bit = 0x10,
+ movm_a2_bit = 0x20,
+ movm_d3_bit = 0x40,
+ movm_d2_bit = 0x80
+};
-/* Info gleaned from scanning a function's prologue. */
+extern void _initialize_mn10300_tdep (void);
+static CORE_ADDR mn10300_analyze_prologue (struct frame_info *fi,
+ CORE_ADDR pc);
-struct pifsr /* Info about one saved reg */
+/* mn10300 private data */
+struct gdbarch_tdep
{
- int framereg; /* Frame reg (SP or FP) */
- int offset; /* Offset from framereg */
- int reg; /* Saved register number */
+ int am33_mode;
+#define AM33_MODE (gdbarch_tdep (current_gdbarch)->am33_mode)
};
-struct prologue_info
+/* Additional info used by the frame */
+
+struct frame_extra_info
+ {
+ int status;
+ int stack_size;
+ };
+
+
+static char *
+register_name (int reg, char **regs, long sizeof_regs)
{
- int framereg;
- int frameoffset;
- int start_function;
- struct pifsr *pifsrs;
-};
+ if (reg < 0 || reg >= sizeof_regs / sizeof (regs[0]))
+ return NULL;
+ else
+ return regs[reg];
+}
-/* Function: frame_chain
- Figure out and return the caller's frame pointer given current
- frame_info struct.
+static char *
+mn10300_generic_register_name (int reg)
+{
+ static char *regs[] =
+ { "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",
+ "sp", "pc", "mdr", "psw", "lir", "lar", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "fp"
+ };
+ return register_name (reg, regs, sizeof regs);
+}
- We start out knowing the current pc, current sp, current fp.
- We want to determine the caller's fp and caller's pc. To do this
- correctly, we have to be able to handle the case where we are in the
- middle of the prologue which involves scanning the prologue.
- We don't handle dummy frames yet but we would probably just return the
- stack pointer that was in use at the time the function call was made?
-*/
+static char *
+am33_register_name (int reg)
+{
+ static char *regs[] =
+ { "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",
+ "sp", "pc", "mdr", "psw", "lir", "lar", "",
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "ssp", "msp", "usp", "mcrh", "mcrl", "mcvf", "", "", ""
+ };
+ return register_name (reg, regs, sizeof regs);
+}
+
+static CORE_ADDR
+mn10300_saved_pc_after_call (struct frame_info *fi)
+{
+ return read_memory_integer (read_register (SP_REGNUM), 4);
+}
+
+static void
+mn10300_extract_return_value (struct type *type, char *regbuf, char *valbuf)
+{
+ if (TYPE_CODE (type) == TYPE_CODE_PTR)
+ memcpy (valbuf, regbuf + REGISTER_BYTE (4), TYPE_LENGTH (type));
+ else
+ memcpy (valbuf, regbuf + REGISTER_BYTE (0), TYPE_LENGTH (type));
+}
+
+static CORE_ADDR
+mn10300_extract_struct_value_address (char *regbuf)
+{
+ return extract_address (regbuf + REGISTER_BYTE (4),
+ REGISTER_RAW_SIZE (4));
+}
+
+static void
+mn10300_store_return_value (struct type *type, char *valbuf)
+{
+ if (TYPE_CODE (type) == TYPE_CODE_PTR)
+ write_register_bytes (REGISTER_BYTE (4), valbuf, TYPE_LENGTH (type));
+ else
+ write_register_bytes (REGISTER_BYTE (0), valbuf, TYPE_LENGTH (type));
+}
-CORE_ADDR
-mn10300_frame_chain (fi)
- struct frame_info *fi;
+static struct frame_info *analyze_dummy_frame (CORE_ADDR, CORE_ADDR);
+static struct frame_info *
+analyze_dummy_frame (CORE_ADDR pc, CORE_ADDR frame)
{
- struct prologue_info pi;
- CORE_ADDR callers_pc, callers_fp, curr_sp;
- CORE_ADDR past_prologue_addr;
- int past_prologue = 1; /* default to being past prologue */
- int n_movm_args = 4;
+ static struct frame_info *dummy = NULL;
+ if (dummy == NULL)
+ {
+ dummy = xmalloc (sizeof (struct frame_info));
+ dummy->saved_regs = xmalloc (SIZEOF_FRAME_SAVED_REGS);
+ dummy->extra_info = xmalloc (sizeof (struct frame_extra_info));
+ }
+ dummy->next = NULL;
+ dummy->prev = NULL;
+ dummy->pc = pc;
+ dummy->frame = frame;
+ dummy->extra_info->status = 0;
+ dummy->extra_info->stack_size = 0;
+ memset (dummy->saved_regs, '\000', SIZEOF_FRAME_SAVED_REGS);
+ mn10300_analyze_prologue (dummy, 0);
+ return dummy;
+}
+
+/* Values for frame_info.status */
- struct pifsr *pifsr, *pifsr_tmp;
+#define MY_FRAME_IN_SP 0x1
+#define MY_FRAME_IN_FP 0x2
+#define NO_MORE_FRAMES 0x4
+
+
+/* Should call_function allocate stack space for a struct return? */
+static int
+mn10300_use_struct_convention (int gcc_p, struct type *type)
+{
+ return (TYPE_NFIELDS (type) > 1 || TYPE_LENGTH (type) > 8);
+}
- /* current pc is fi->pc */
- /* current fp is fi->frame */
+/* The breakpoint instruction must be the same size as the smallest
+ instruction in the instruction set.
- /* current sp is: */
- curr_sp = read_register (SP_REGNUM);
+ The Matsushita mn10x00 processors have single byte instructions
+ so we need a single byte breakpoint. Matsushita hasn't defined
+ one, so we defined it ourselves. */
-/*
- printf("curr pc = 0x%x ; curr fp = 0x%x ; curr sp = 0x%x\n",
- fi->pc, fi->frame, curr_sp);
-*/
+static unsigned char *
+mn10300_breakpoint_from_pc (CORE_ADDR *bp_addr, int *bp_size)
+{
+ static char breakpoint[] =
+ {0xff};
+ *bp_size = 1;
+ return breakpoint;
+}
- /* first inst after prologue is: */
- past_prologue_addr = mn10300_skip_prologue (fi->pc);
- /* Are we in the prologue? */
- /* Yes if mn10300_skip_prologue returns an address after the
- current pc in which case we have to scan prologue */
- if (fi->pc < mn10300_skip_prologue (fi->pc))
- past_prologue = 0;
+/* Fix fi->frame if it's bogus at this point. This is a helper
+ function for mn10300_analyze_prologue. */
- /* scan prologue if we're not past it */
- if (!past_prologue)
+static void
+fix_frame_pointer (struct frame_info *fi, int stack_size)
+{
+ if (fi && fi->next == NULL)
{
- /* printf("scanning prologue\n"); */
- /* FIXME -- fill out this case later */
- return 0x0; /* bogus value */
+ if (fi->extra_info->status & MY_FRAME_IN_SP)
+ fi->frame = read_sp () - stack_size;
+ else if (fi->extra_info->status & MY_FRAME_IN_FP)
+ fi->frame = read_register (A3_REGNUM);
}
+}
+
+
+/* Set offsets of registers saved by movm instruction.
+ This is a helper function for mn10300_analyze_prologue. */
+
+static void
+set_movm_offsets (struct frame_info *fi, int movm_args)
+{
+ int offset = 0;
+
+ if (fi == NULL || movm_args == 0)
+ return;
- if (past_prologue) /* if we don't need to scan the prologue */
+ if (movm_args & movm_other_bit)
{
-/* printf("we're past the prologue\n"); */
- callers_pc = fi->frame - REGISTER_SIZE;
- callers_fp = fi->frame - ((n_movm_args + 1) * REGISTER_SIZE);
-/*
- printf("callers_pc = 0x%x ; callers_fp = 0x%x\n",
- callers_pc, callers_fp);
-
- printf("*callers_pc = 0x%x ; *callers_fp = 0x%x\n",
- read_memory_integer(callers_pc, REGISTER_SIZE),
- read_memory_integer(callers_fp, REGISTER_SIZE));
-*/
- return read_memory_integer(callers_fp, REGISTER_SIZE);
+ /* The `other' bit leaves a blank area of four bytes at the
+ beginning of its block of saved registers, making it 32 bytes
+ long in total. */
+ fi->saved_regs[LAR_REGNUM] = fi->frame + offset + 4;
+ fi->saved_regs[LIR_REGNUM] = fi->frame + offset + 8;
+ fi->saved_regs[MDR_REGNUM] = fi->frame + offset + 12;
+ fi->saved_regs[A0_REGNUM + 1] = fi->frame + offset + 16;
+ fi->saved_regs[A0_REGNUM] = fi->frame + offset + 20;
+ fi->saved_regs[D0_REGNUM + 1] = fi->frame + offset + 24;
+ fi->saved_regs[D0_REGNUM] = fi->frame + offset + 28;
+ offset += 32;
+ }
+ if (movm_args & movm_a3_bit)
+ {
+ fi->saved_regs[A3_REGNUM] = fi->frame + offset;
+ offset += 4;
+ }
+ if (movm_args & movm_a2_bit)
+ {
+ fi->saved_regs[A2_REGNUM] = fi->frame + offset;
+ offset += 4;
+ }
+ if (movm_args & movm_d3_bit)
+ {
+ fi->saved_regs[D3_REGNUM] = fi->frame + offset;
+ offset += 4;
+ }
+ if (movm_args & movm_d2_bit)
+ {
+ fi->saved_regs[D2_REGNUM] = fi->frame + offset;
+ offset += 4;
+ }
+ if (AM33_MODE)
+ {
+ if (movm_args & movm_exother_bit)
+ {
+ fi->saved_regs[MCVF_REGNUM] = fi->frame + offset;
+ fi->saved_regs[MCRL_REGNUM] = fi->frame + offset + 4;
+ fi->saved_regs[MCRH_REGNUM] = fi->frame + offset + 8;
+ fi->saved_regs[MDRQ_REGNUM] = fi->frame + offset + 12;
+ fi->saved_regs[E0_REGNUM + 1] = fi->frame + offset + 16;
+ fi->saved_regs[E0_REGNUM + 0] = fi->frame + offset + 20;
+ offset += 24;
+ }
+ if (movm_args & movm_exreg1_bit)
+ {
+ fi->saved_regs[E0_REGNUM + 7] = fi->frame + offset;
+ fi->saved_regs[E0_REGNUM + 6] = fi->frame + offset + 4;
+ fi->saved_regs[E0_REGNUM + 5] = fi->frame + offset + 8;
+ fi->saved_regs[E0_REGNUM + 4] = fi->frame + offset + 12;
+ offset += 16;
+ }
+ if (movm_args & movm_exreg0_bit)
+ {
+ fi->saved_regs[E0_REGNUM + 3] = fi->frame + offset;
+ fi->saved_regs[E0_REGNUM + 2] = fi->frame + offset + 4;
+ offset += 8;
+ }
}
-
- /* we don't get here */
}
-/* Function: find_callers_reg
- Find REGNUM on the stack. Otherwise, it's in an active register.
- One thing we might want to do here is to check REGNUM against the
- clobber mask, and somehow flag it as invalid if it isn't saved on
- the stack somewhere. This would provide a graceful failure mode
- when trying to get the value of caller-saves registers for an inner
- frame. */
-CORE_ADDR
-mn10300_find_callers_reg (fi, regnum)
- struct frame_info *fi;
- int regnum;
+/* The main purpose of this file is dealing with prologues to extract
+ information about stack frames and saved registers.
+
+ In gcc/config/mn13000/mn10300.c, the expand_prologue prologue
+ function is pretty readable, and has a nice explanation of how the
+ prologue is generated. The prologues generated by that code will
+ have the following form (NOTE: the current code doesn't handle all
+ this!):
+
+ + If this is an old-style varargs function, then its arguments
+ need to be flushed back to the stack:
+
+ mov d0,(4,sp)
+ mov d1,(4,sp)
+
+ + If we use any of the callee-saved registers, save them now.
+
+ movm [some callee-saved registers],(sp)
+
+ + If we have any floating-point registers to save:
+
+ - Decrement the stack pointer to reserve space for the registers.
+ If the function doesn't need a frame pointer, we may combine
+ this with the adjustment that reserves space for the frame.
+
+ add -SIZE, sp
+
+ - Save the floating-point registers. We have two possible
+ strategies:
+
+ . Save them at fixed offset from the SP:
+
+ fmov fsN,(OFFSETN,sp)
+ fmov fsM,(OFFSETM,sp)
+ ...
+
+ Note that, if OFFSETN happens to be zero, you'll get the
+ different opcode: fmov fsN,(sp)
+
+ . Or, set a0 to the start of the save area, and then use
+ post-increment addressing to save the FP registers.
+
+ mov sp, a0
+ add SIZE, a0
+ fmov fsN,(a0+)
+ fmov fsM,(a0+)
+ ...
+
+ + If the function needs a frame pointer, we set it here.
+
+ mov sp, a3
+
+ + Now we reserve space for the stack frame proper. This could be
+ merged into the `add -SIZE, sp' instruction for FP saves up
+ above, unless we needed to set the frame pointer in the previous
+ step, or the frame is so large that allocating the whole thing at
+ once would put the FP register save slots out of reach of the
+ addressing mode (128 bytes).
+
+ add -SIZE, sp
+
+ One day we might keep the stack pointer constant, that won't
+ change the code for prologues, but it will make the frame
+ pointerless case much more common. */
+
+/* Analyze the prologue to determine where registers are saved,
+ the end of the prologue, etc etc. Return the end of the prologue
+ scanned.
+
+ We store into FI (if non-null) several tidbits of information:
+
+ * stack_size -- size of this stack frame. Note that if we stop in
+ certain parts of the prologue/epilogue we may claim the size of the
+ current frame is zero. This happens when the current frame has
+ not been allocated yet or has already been deallocated.
+
+ * fsr -- Addresses of registers saved in the stack by this frame.
+
+ * status -- A (relatively) generic status indicator. It's a bitmask
+ with the following bits:
+
+ MY_FRAME_IN_SP: The base of the current frame is actually in
+ the stack pointer. This can happen for frame pointerless
+ functions, or cases where we're stopped in the prologue/epilogue
+ itself. For these cases mn10300_analyze_prologue will need up
+ update fi->frame before returning or analyzing the register
+ save instructions.
+
+ MY_FRAME_IN_FP: The base of the current frame is in the
+ frame pointer register ($a3).
+
+ NO_MORE_FRAMES: Set this if the current frame is "start" or
+ if the first instruction looks like mov <imm>,sp. This tells
+ frame chain to not bother trying to unwind past this frame. */
+
+static CORE_ADDR
+mn10300_analyze_prologue (struct frame_info *fi, CORE_ADDR pc)
{
-/* printf("mn10300_find_callers_reg\n"); */
+ CORE_ADDR func_addr, func_end, addr, stop;
+ CORE_ADDR stack_size;
+ int imm_size;
+ unsigned char buf[4];
+ int status, movm_args = 0;
+ char *name;
+
+ /* Use the PC in the frame if it's provided to look up the
+ start of this function. */
+ pc = (fi ? fi->pc : pc);
+
+ /* Find the start of this function. */
+ status = find_pc_partial_function (pc, &name, &func_addr, &func_end);
+
+ /* Do nothing if we couldn't find the start of this function or if we're
+ stopped at the first instruction in the prologue. */
+ if (status == 0)
+ {
+ return pc;
+ }
+
+ /* If we're in start, then give up. */
+ if (strcmp (name, "start") == 0)
+ {
+ if (fi != NULL)
+ fi->extra_info->status = NO_MORE_FRAMES;
+ return pc;
+ }
+
+ /* At the start of a function our frame is in the stack pointer. */
+ if (fi)
+ fi->extra_info->status = MY_FRAME_IN_SP;
+
+ /* Get the next two bytes into buf, we need two because rets is a two
+ byte insn and the first isn't enough to uniquely identify it. */
+ status = read_memory_nobpt (pc, buf, 2);
+ if (status != 0)
+ return pc;
+
+ /* If we're physically on an "rets" instruction, then our frame has
+ already been deallocated. Note this can also be true for retf
+ and ret if they specify a size of zero.
+
+ In this case fi->frame is bogus, we need to fix it. */
+ if (fi && buf[0] == 0xf0 && buf[1] == 0xfc)
+ {
+ if (fi->next == NULL)
+ fi->frame = read_sp ();
+ return fi->pc;
+ }
+
+ /* Similarly if we're stopped on the first insn of a prologue as our
+ frame hasn't been allocated yet. */
+ if (fi && fi->pc == func_addr)
+ {
+ if (fi->next == NULL)
+ fi->frame = read_sp ();
+ return fi->pc;
+ }
+
+ /* Figure out where to stop scanning. */
+ stop = fi ? fi->pc : func_end;
+
+ /* Don't walk off the end of the function. */
+ stop = stop > func_end ? func_end : stop;
+
+ /* Start scanning on the first instruction of this function. */
+ addr = func_addr;
+
+ /* Suck in two bytes. */
+ status = read_memory_nobpt (addr, buf, 2);
+ if (status != 0)
+ {
+ fix_frame_pointer (fi, 0);
+ return addr;
+ }
+
+ /* First see if this insn sets the stack pointer from a register; if
+ so, it's probably the initialization of the stack pointer in _start,
+ so mark this as the bottom-most frame. */
+ if (buf[0] == 0xf2 && (buf[1] & 0xf3) == 0xf0)
+ {
+ if (fi)
+ fi->extra_info->status = NO_MORE_FRAMES;
+ return addr;
+ }
+
+ /* Now look for movm [regs],sp, which saves the callee saved registers.
+
+ At this time we don't know if fi->frame is valid, so we only note
+ that we encountered a movm instruction. Later, we'll set the entries
+ in fsr.regs as needed. */
+ if (buf[0] == 0xcf)
+ {
+ /* Extract the register list for the movm instruction. */
+ status = read_memory_nobpt (addr + 1, buf, 1);
+ movm_args = *buf;
+
+ addr += 2;
+
+ /* Quit now if we're beyond the stop point. */
+ if (addr >= stop)
+ {
+ /* Fix fi->frame since it's bogus at this point. */
+ if (fi && fi->next == NULL)
+ fi->frame = read_sp ();
+
+ /* Note if/where callee saved registers were saved. */
+ set_movm_offsets (fi, movm_args);
+ return addr;
+ }
+
+ /* Get the next two bytes so the prologue scan can continue. */
+ status = read_memory_nobpt (addr, buf, 2);
+ if (status != 0)
+ {
+ /* Fix fi->frame since it's bogus at this point. */
+ if (fi && fi->next == NULL)
+ fi->frame = read_sp ();
+
+ /* Note if/where callee saved registers were saved. */
+ set_movm_offsets (fi, movm_args);
+ return addr;
+ }
+ }
+
+ /* Now see if we set up a frame pointer via "mov sp,a3" */
+ if (buf[0] == 0x3f)
+ {
+ addr += 1;
+
+ /* The frame pointer is now valid. */
+ if (fi)
+ {
+ fi->extra_info->status |= MY_FRAME_IN_FP;
+ fi->extra_info->status &= ~MY_FRAME_IN_SP;
+ }
+
+ /* Quit now if we're beyond the stop point. */
+ if (addr >= stop)
+ {
+ /* Fix fi->frame if it's bogus at this point. */
+ fix_frame_pointer (fi, 0);
+
+ /* Note if/where callee saved registers were saved. */
+ set_movm_offsets (fi, movm_args);
+ return addr;
+ }
+
+ /* Get two more bytes so scanning can continue. */
+ status = read_memory_nobpt (addr, buf, 2);
+ if (status != 0)
+ {
+ /* Fix fi->frame if it's bogus at this point. */
+ fix_frame_pointer (fi, 0);
+
+ /* Note if/where callee saved registers were saved. */
+ set_movm_offsets (fi, movm_args);
+ return addr;
+ }
+ }
+
+ /* Next we should allocate the local frame. No more prologue insns
+ are found after allocating the local frame.
+
+ Search for add imm8,sp (0xf8feXX)
+ or add imm16,sp (0xfafeXXXX)
+ or add imm32,sp (0xfcfeXXXXXXXX).
+
+ If none of the above was found, then this prologue has no
+ additional stack. */
+
+ status = read_memory_nobpt (addr, buf, 2);
+ if (status != 0)
+ {
+ /* Fix fi->frame if it's bogus at this point. */
+ fix_frame_pointer (fi, 0);
+
+ /* Note if/where callee saved registers were saved. */
+ set_movm_offsets (fi, movm_args);
+ return addr;
+ }
+
+ imm_size = 0;
+ if (buf[0] == 0xf8 && buf[1] == 0xfe)
+ imm_size = 1;
+ else if (buf[0] == 0xfa && buf[1] == 0xfe)
+ imm_size = 2;
+ else if (buf[0] == 0xfc && buf[1] == 0xfe)
+ imm_size = 4;
+
+ if (imm_size != 0)
+ {
+ /* Suck in imm_size more bytes, they'll hold the size of the
+ current frame. */
+ status = read_memory_nobpt (addr + 2, buf, imm_size);
+ if (status != 0)
+ {
+ /* Fix fi->frame if it's bogus at this point. */
+ fix_frame_pointer (fi, 0);
+
+ /* Note if/where callee saved registers were saved. */
+ set_movm_offsets (fi, movm_args);
+ return addr;
+ }
- for (; fi; fi = fi->next)
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- return generic_read_register_dummy (fi->pc, fi->frame, regnum);
- else if (fi->fsr.regs[regnum] != 0)
- return read_memory_unsigned_integer (fi->fsr.regs[regnum],
- REGISTER_RAW_SIZE(regnum));
+ /* Note the size of the stack in the frame info structure. */
+ stack_size = extract_signed_integer (buf, imm_size);
+ if (fi)
+ fi->extra_info->stack_size = stack_size;
- return read_register (regnum);
+ /* We just consumed 2 + imm_size bytes. */
+ addr += 2 + imm_size;
+
+ /* No more prologue insns follow, so begin preparation to return. */
+ /* Fix fi->frame if it's bogus at this point. */
+ fix_frame_pointer (fi, stack_size);
+
+ /* Note if/where callee saved registers were saved. */
+ set_movm_offsets (fi, movm_args);
+ return addr;
+ }
+
+ /* We never found an insn which allocates local stack space, regardless
+ this is the end of the prologue. */
+ /* Fix fi->frame if it's bogus at this point. */
+ fix_frame_pointer (fi, 0);
+
+ /* Note if/where callee saved registers were saved. */
+ set_movm_offsets (fi, movm_args);
+ return addr;
}
-/* Function: skip_prologue
- Return the address of the first inst past the prologue of the function.
-*/
-CORE_ADDR
-mn10300_skip_prologue (pc)
- CORE_ADDR pc;
+/* Function: saved_regs_size
+ Return the size in bytes of the register save area, based on the
+ saved_regs array in FI. */
+static int
+saved_regs_size (struct frame_info *fi)
+{
+ int adjust = 0;
+ int i;
+
+ /* Reserve four bytes for every register saved. */
+ for (i = 0; i < NUM_REGS; i++)
+ if (fi->saved_regs[i])
+ adjust += 4;
+
+ /* If we saved LIR, then it's most likely we used a `movm'
+ instruction with the `other' bit set, in which case the SP is
+ decremented by an extra four bytes, "to simplify calculation
+ of the transfer area", according to the processor manual. */
+ if (fi->saved_regs[LIR_REGNUM])
+ adjust += 4;
+
+ return adjust;
+}
+
+
+/* Function: frame_chain
+ Figure out and return the caller's frame pointer given current
+ frame_info struct.
+
+ We don't handle dummy frames yet but we would probably just return the
+ stack pointer that was in use at the time the function call was made? */
+
+static CORE_ADDR
+mn10300_frame_chain (struct frame_info *fi)
{
- CORE_ADDR func_addr, func_end;
+ struct frame_info *dummy;
+ /* Walk through the prologue to determine the stack size,
+ location of saved registers, end of the prologue, etc. */
+ if (fi->extra_info->status == 0)
+ mn10300_analyze_prologue (fi, (CORE_ADDR) 0);
-/* printf("mn10300_skip_prologue\n"); */
+ /* Quit now if mn10300_analyze_prologue set NO_MORE_FRAMES. */
+ if (fi->extra_info->status & NO_MORE_FRAMES)
+ return 0;
- /* See what the symbol table says */
+ /* Now that we've analyzed our prologue, determine the frame
+ pointer for our caller.
- if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
- {
- struct symtab_and_line sal;
+ If our caller has a frame pointer, then we need to
+ find the entry value of $a3 to our function.
+
+ If fsr.regs[A3_REGNUM] is nonzero, then it's at the memory
+ location pointed to by fsr.regs[A3_REGNUM].
- sal = find_pc_line (func_addr, 0);
+ Else it's still in $a3.
- if (sal.line != 0 && sal.end < func_end)
- return sal.end;
+ If our caller does not have a frame pointer, then his
+ frame base is fi->frame + -caller's stack size. */
+
+ /* The easiest way to get that info is to analyze our caller's frame.
+ So we set up a dummy frame and call mn10300_analyze_prologue to
+ find stuff for us. */
+ dummy = analyze_dummy_frame (FRAME_SAVED_PC (fi), fi->frame);
+
+ if (dummy->extra_info->status & MY_FRAME_IN_FP)
+ {
+ /* Our caller has a frame pointer. So find the frame in $a3 or
+ in the stack. */
+ if (fi->saved_regs[A3_REGNUM])
+ return (read_memory_integer (fi->saved_regs[A3_REGNUM], REGISTER_SIZE));
else
- /* Either there's no line info, or the line after the prologue is after
- the end of the function. In this case, there probably isn't a
- prologue. */
- return pc;
+ return read_register (A3_REGNUM);
}
+ else
+ {
+ int adjust = saved_regs_size (fi);
-/* We can't find the start of this function, so there's nothing we can do. */
- return pc;
+ /* Our caller does not have a frame pointer. So his frame starts
+ at the base of our frame (fi->frame) + register save space
+ + <his size>. */
+ return fi->frame + adjust + -dummy->extra_info->stack_size;
+ }
}
-/* Function: pop_frame
- This routine gets called when either the user uses the `return'
- command, or the call dummy breakpoint gets hit. */
+/* Function: skip_prologue
+ Return the address of the first inst past the prologue of the function. */
-void
-mn10300_pop_frame (frame)
- struct frame_info *frame;
+static CORE_ADDR
+mn10300_skip_prologue (CORE_ADDR pc)
+{
+ /* We used to check the debug symbols, but that can lose if
+ we have a null prologue. */
+ return mn10300_analyze_prologue (NULL, pc);
+}
+
+/* generic_pop_current_frame calls this function if the current
+ frame isn't a dummy frame. */
+static void
+mn10300_pop_frame_regular (struct frame_info *frame)
{
int regnum;
-/* printf("mn10300_pop_frame start\n"); */
+ write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
- if (PC_IN_CALL_DUMMY(frame->pc, frame->frame, frame->frame))
- generic_pop_dummy_frame ();
- else
- {
- write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
+ /* Restore any saved registers. */
+ for (regnum = 0; regnum < NUM_REGS; regnum++)
+ if (frame->saved_regs[regnum] != 0)
+ {
+ ULONGEST value;
- for (regnum = 0; regnum < NUM_REGS; regnum++)
- if (frame->fsr.regs[regnum] != 0)
- write_register (regnum,
- read_memory_unsigned_integer (frame->fsr.regs[regnum],
- REGISTER_RAW_SIZE(regnum)));
+ value = read_memory_unsigned_integer (frame->saved_regs[regnum],
+ REGISTER_RAW_SIZE (regnum));
+ write_register (regnum, value);
+ }
- write_register (SP_REGNUM, FRAME_FP (frame));
- }
+ /* Actually cut back the stack. */
+ write_register (SP_REGNUM, FRAME_FP (frame));
- flush_cached_frames ();
+ /* Don't we need to set the PC?!? XXX FIXME. */
+}
-/* printf("mn10300_pop_frame end\n"); */
+/* Function: pop_frame
+ This routine gets called when either the user uses the `return'
+ command, or the call dummy breakpoint gets hit. */
+static void
+mn10300_pop_frame (void)
+{
+ /* This function checks for and handles generic dummy frames, and
+ calls back to our function for ordinary frames. */
+ generic_pop_current_frame (mn10300_pop_frame_regular);
+
+ /* Throw away any cached frame information. */
+ flush_cached_frames ();
}
/* Function: push_arguments
Setup arguments for a call to the target. Arguments go in
- order on the stack.
-*/
+ order on the stack. */
-CORE_ADDR
-mn10300_push_arguments (nargs, args, sp, struct_return, struct_addr)
- int nargs;
- value_ptr *args;
- CORE_ADDR sp;
- unsigned char struct_return;
- CORE_ADDR struct_addr;
+static CORE_ADDR
+mn10300_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int argnum = 0;
int len = 0;
- int stack_offset = 0; /* copy args to this offset onto stack */
+ int stack_offset = 0;
+ int regsused = struct_return ? 1 : 0;
-/* printf("mn10300_push_arguments start\n"); */
-
- /* First, just for safety, make sure stack is aligned */
+ /* This should be a nop, but align the stack just in case something
+ went wrong. Stacks are four byte aligned on the mn10300. */
sp &= ~3;
- /* Now make space on the stack for the args. */
+ /* Now make space on the stack for the args.
+
+ XXX This doesn't appear to handle pass-by-invisible reference
+ arguments. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ((TYPE_LENGTH(VALUE_TYPE(args[argnum])) + 3) & ~3);
+ {
+ int arg_length = (TYPE_LENGTH (VALUE_TYPE (args[argnum])) + 3) & ~3;
+
+ while (regsused < 2 && arg_length > 0)
+ {
+ regsused++;
+ arg_length -= 4;
+ }
+ len += arg_length;
+ }
+ /* Allocate stack space. */
sp -= len;
+ regsused = struct_return ? 1 : 0;
/* Push all arguments onto the stack. */
for (argnum = 0; argnum < nargs; argnum++)
{
int len;
char *val;
+ /* XXX Check this. What about UNIONS? */
if (TYPE_CODE (VALUE_TYPE (*args)) == TYPE_CODE_STRUCT
&& TYPE_LENGTH (VALUE_TYPE (*args)) > 8)
{
- /* for now, pretend structs aren't special */
- len = TYPE_LENGTH (VALUE_TYPE (*args));
- val = (char *)VALUE_CONTENTS (*args);
+ /* XXX Wrong, we want a pointer to this argument. */
+ len = TYPE_LENGTH (VALUE_TYPE (*args));
+ val = (char *) VALUE_CONTENTS (*args);
}
else
{
len = TYPE_LENGTH (VALUE_TYPE (*args));
- val = (char *)VALUE_CONTENTS (*args);
+ val = (char *) VALUE_CONTENTS (*args);
+ }
+
+ while (regsused < 2 && len > 0)
+ {
+ write_register (regsused, extract_unsigned_integer (val, 4));
+ val += 4;
+ len -= 4;
+ regsused++;
}
while (len > 0)
{
write_memory (sp + stack_offset, val, 4);
-
len -= 4;
val += 4;
stack_offset += 4;
}
+
args++;
}
-/* printf"mn10300_push_arguments end\n"); */
-
+ /* Make space for the flushback area. */
+ sp -= 8;
return sp;
}
/* Function: push_return_address (pc)
Set up the return address for the inferior function call.
Needed for targets where we don't actually execute a JSR/BSR instruction */
-
-CORE_ADDR
-mn10300_push_return_address (pc, sp)
- CORE_ADDR pc;
- CORE_ADDR sp;
+
+static CORE_ADDR
+mn10300_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
{
-/* printf("mn10300_push_return_address\n"); */
+ unsigned char buf[4];
- /* write_register (RP_REGNUM, CALL_DUMMY_ADDRESS ()); */
- return sp;
+ store_unsigned_integer (buf, 4, CALL_DUMMY_ADDRESS ());
+ write_memory (sp - 4, buf, 4);
+ return sp - 4;
}
-
+
+/* Function: store_struct_return (addr,sp)
+ Store the structure value return address for an inferior function
+ call. */
+
+static void
+mn10300_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
+{
+ /* The structure return address is passed as the first argument. */
+ write_register (0, addr);
+}
+
/* Function: frame_saved_pc
Find the caller of this frame. We do this by seeing if RP_REGNUM
is saved in the stack anywhere, otherwise we get it from the
instead of RP, because that's where "caller" of the dummy-frame
will be found. */
-CORE_ADDR
-mn10300_frame_saved_pc (fi)
- struct frame_info *fi;
+static CORE_ADDR
+mn10300_frame_saved_pc (struct frame_info *fi)
{
-/* printf("mn10300_frame_saved_pc\n"); */
+ int adjust = saved_regs_size (fi);
- return (read_memory_integer(fi->frame - REGISTER_SIZE, REGISTER_SIZE));
+ return (read_memory_integer (fi->frame + adjust, REGISTER_SIZE));
}
-void
-get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
- char *raw_buffer;
- int *optimized;
- CORE_ADDR *addrp;
- struct frame_info *frame;
- int regnum;
- enum lval_type *lval;
-{
-/* printf("get_saved_register\n"); */
-
- generic_get_saved_register (raw_buffer, optimized, addrp,
- frame, regnum, lval);
-}
-
-/* Function: init_extra_frame_info
+/* Function: mn10300_init_extra_frame_info
Setup the frame's frame pointer, pc, and frame addresses for saved
- registers. Most of the work is done in frame_chain().
+ registers. Most of the work is done in mn10300_analyze_prologue().
Note that when we are called for the last frame (currently active frame),
that fi->pc and fi->frame will already be setup. However, fi->frame will
be valid only if this routine uses FP. For previous frames, fi-frame will
- always be correct (since that is derived from v850_frame_chain ()).
+ always be correct. mn10300_analyze_prologue will fix fi->frame if
+ it's not valid.
We can be called with the PC in the call dummy under two circumstances.
First, during normal backtracing, second, while figuring out the frame
- pointer just prior to calling the target function (see run_stack_dummy).
-*/
+ pointer just prior to calling the target function (see run_stack_dummy). */
-void
-mn10300_init_extra_frame_info (fi)
- struct frame_info *fi;
+static void
+mn10300_init_extra_frame_info (int fromleaf, struct frame_info *fi)
{
- struct prologue_info pi;
- struct pifsr pifsrs[NUM_REGS + 1], *pifsr;
- int reg;
-
if (fi->next)
fi->pc = FRAME_SAVED_PC (fi->next);
- memset (fi->fsr.regs, '\000', sizeof fi->fsr.regs);
+ frame_saved_regs_zalloc (fi);
+ fi->extra_info = (struct frame_extra_info *)
+ frame_obstack_alloc (sizeof (struct frame_extra_info));
- /* The call dummy doesn't save any registers on the stack, so we can return
- now. */
-/*
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- return;
+ fi->extra_info->status = 0;
+ fi->extra_info->stack_size = 0;
+
+ mn10300_analyze_prologue (fi, 0);
+}
+
+
+/* This function's job is handled by init_extra_frame_info. */
+static void
+mn10300_frame_init_saved_regs (struct frame_info *frame)
+{
+}
- pi.pifsrs = pifsrs;
-*/
- /* v850_scan_prologue (fi->pc, &pi); */
-/*
- if (!fi->next && pi.framereg == SP_REGNUM)
- fi->frame = read_register (pi.framereg) - pi.frameoffset;
+/* Function: mn10300_virtual_frame_pointer
+ Return the register that the function uses for a frame pointer,
+ plus any necessary offset to be applied to the register before
+ any frame pointer offsets. */
- for (pifsr = pifsrs; pifsr->framereg; pifsr++)
+static void
+mn10300_virtual_frame_pointer (CORE_ADDR pc,
+ int *reg,
+ LONGEST *offset)
+{
+ struct frame_info *dummy = analyze_dummy_frame (pc, 0);
+ /* Set up a dummy frame_info, Analyze the prolog and fill in the
+ extra info. */
+ /* Results will tell us which type of frame it uses. */
+ if (dummy->extra_info->status & MY_FRAME_IN_SP)
+ {
+ *reg = SP_REGNUM;
+ *offset = -(dummy->extra_info->stack_size);
+ }
+ else
{
- fi->fsr.regs[pifsr->reg] = pifsr->offset + fi->frame;
+ *reg = A3_REGNUM;
+ *offset = 0;
+ }
+}
+
+static int
+mn10300_reg_struct_has_addr (int gcc_p, struct type *type)
+{
+ return (TYPE_LENGTH (type) > 8);
+}
+
+static struct type *
+mn10300_register_virtual_type (int reg)
+{
+ return builtin_type_int;
+}
+
+static int
+mn10300_register_byte (int reg)
+{
+ return (reg * 4);
+}
+
+static int
+mn10300_register_virtual_size (int reg)
+{
+ return 4;
+}
+
+static int
+mn10300_register_raw_size (int reg)
+{
+ return 4;
+}
+
+/* If DWARF2 is a register number appearing in Dwarf2 debug info, then
+ mn10300_dwarf2_reg_to_regnum (DWARF2) is the corresponding GDB
+ register number. Why don't Dwarf2 and GDB use the same numbering?
+ Who knows? But since people have object files lying around with
+ the existing Dwarf2 numbering, and other people have written stubs
+ to work with the existing GDB, neither of them can change. So we
+ just have to cope. */
+static int
+mn10300_dwarf2_reg_to_regnum (int dwarf2)
+{
+ /* This table is supposed to be shaped like the REGISTER_NAMES
+ initializer in gcc/config/mn10300/mn10300.h. Registers which
+ appear in GCC's numbering, but have no counterpart in GDB's
+ world, are marked with a -1. */
+ static int dwarf2_to_gdb[] = {
+ 0, 1, 2, 3, 4, 5, 6, 7, -1, 8,
+ 15, 16, 17, 18, 19, 20, 21, 22
+ };
+ int gdb;
+
+ if (dwarf2 < 0
+ || dwarf2 >= (sizeof (dwarf2_to_gdb) / sizeof (dwarf2_to_gdb[0]))
+ || dwarf2_to_gdb[dwarf2] == -1)
+ internal_error (__FILE__, __LINE__,
+ "bogus register number in debug info: %d", dwarf2);
+
+ return dwarf2_to_gdb[dwarf2];
+}
+
+static void
+mn10300_print_register (const char *name, int regnum, int reg_width)
+{
+ char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE);
- if (pifsr->framereg == SP_REGNUM)
- fi->fsr.regs[pifsr->reg] += pi.frameoffset;
+ if (reg_width)
+ printf_filtered ("%*s: ", reg_width, name);
+ else
+ printf_filtered ("%s: ", name);
+
+ /* Get the data */
+ if (read_relative_register_raw_bytes (regnum, raw_buffer))
+ {
+ printf_filtered ("[invalid]");
+ return;
+ }
+ else
+ {
+ int byte;
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ for (byte = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
+ byte < REGISTER_RAW_SIZE (regnum);
+ byte++)
+ printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
+ }
+ else
+ {
+ for (byte = REGISTER_VIRTUAL_SIZE (regnum) - 1;
+ byte >= 0;
+ byte--)
+ printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
+ }
}
-*/
-/* printf("init_extra_frame_info\n"); */
}
+static void
+mn10300_do_registers_info (int regnum, int fpregs)
+{
+ if (regnum >= 0)
+ {
+ const char *name = REGISTER_NAME (regnum);
+ if (name == NULL || name[0] == '\0')
+ error ("Not a valid register for the current processor type");
+ mn10300_print_register (name, regnum, 0);
+ printf_filtered ("\n");
+ }
+ else
+ {
+ /* print registers in an array 4x8 */
+ int r;
+ int reg;
+ const int nr_in_row = 4;
+ const int reg_width = 4;
+ for (r = 0; r < NUM_REGS; r += nr_in_row)
+ {
+ int c;
+ int printing = 0;
+ int padding = 0;
+ for (c = r; c < r + nr_in_row; c++)
+ {
+ const char *name = REGISTER_NAME (c);
+ if (name != NULL && *name != '\0')
+ {
+ printing = 1;
+ while (padding > 0)
+ {
+ printf_filtered (" ");
+ padding--;
+ }
+ mn10300_print_register (name, c, reg_width);
+ printf_filtered (" ");
+ }
+ else
+ {
+ padding += (reg_width + 2 + 8 + 1);
+ }
+ }
+ if (printing)
+ printf_filtered ("\n");
+ }
+ }
+}
+
+/* Dump out the mn10300 speciic architecture information. */
+
+static void
+mn10300_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ fprintf_unfiltered (file, "mn10300_dump_tdep: am33_mode = %d\n",
+ tdep->am33_mode);
+}
+
+static struct gdbarch *
+mn10300_gdbarch_init (struct gdbarch_info info,
+ struct gdbarch_list *arches)
+{
+ static LONGEST mn10300_call_dummy_words[] = { 0 };
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep = NULL;
+ int am33_mode;
+ gdbarch_register_name_ftype *register_name;
+ int mach;
+ int num_regs;
+
+ arches = gdbarch_list_lookup_by_info (arches, &info);
+ if (arches != NULL)
+ return arches->gdbarch;
+ tdep = xmalloc (sizeof (struct gdbarch_tdep));
+ gdbarch = gdbarch_alloc (&info, tdep);
+
+ if (info.bfd_arch_info != NULL
+ && info.bfd_arch_info->arch == bfd_arch_mn10300)
+ mach = info.bfd_arch_info->mach;
+ else
+ mach = 0;
+ switch (mach)
+ {
+ case 0:
+ case bfd_mach_mn10300:
+ am33_mode = 0;
+ register_name = mn10300_generic_register_name;
+ num_regs = 32;
+ break;
+ case bfd_mach_am33:
+ am33_mode = 1;
+ register_name = am33_register_name;
+ num_regs = 32;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__,
+ "mn10300_gdbarch_init: Unknown mn10300 variant");
+ return NULL; /* keep GCC happy. */
+ }
+
+ /* Registers. */
+ set_gdbarch_num_regs (gdbarch, num_regs);
+ set_gdbarch_register_name (gdbarch, register_name);
+ set_gdbarch_register_size (gdbarch, 4);
+ set_gdbarch_register_bytes (gdbarch,
+ num_regs * gdbarch_register_size (gdbarch));
+ set_gdbarch_max_register_raw_size (gdbarch, 4);
+ set_gdbarch_register_raw_size (gdbarch, mn10300_register_raw_size);
+ set_gdbarch_register_byte (gdbarch, mn10300_register_byte);
+ set_gdbarch_max_register_virtual_size (gdbarch, 4);
+ set_gdbarch_register_virtual_size (gdbarch, mn10300_register_virtual_size);
+ set_gdbarch_register_virtual_type (gdbarch, mn10300_register_virtual_type);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, mn10300_dwarf2_reg_to_regnum);
+ set_gdbarch_do_registers_info (gdbarch, mn10300_do_registers_info);
+ set_gdbarch_sp_regnum (gdbarch, 8);
+ set_gdbarch_pc_regnum (gdbarch, 9);
+ set_gdbarch_fp_regnum (gdbarch, 31);
+ set_gdbarch_virtual_frame_pointer (gdbarch, mn10300_virtual_frame_pointer);
+
+ /* Breakpoints. */
+ set_gdbarch_breakpoint_from_pc (gdbarch, mn10300_breakpoint_from_pc);
+ set_gdbarch_function_start_offset (gdbarch, 0);
+ set_gdbarch_decr_pc_after_break (gdbarch, 0);
+
+ /* Stack unwinding. */
+ set_gdbarch_get_saved_register (gdbarch, generic_get_saved_register);
+ set_gdbarch_frame_chain_valid (gdbarch, generic_file_frame_chain_valid);
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+ set_gdbarch_frame_chain_valid (gdbarch, generic_file_frame_chain_valid);
+ set_gdbarch_saved_pc_after_call (gdbarch, mn10300_saved_pc_after_call);
+ set_gdbarch_init_extra_frame_info (gdbarch, mn10300_init_extra_frame_info);
+ set_gdbarch_init_frame_pc (gdbarch, init_frame_pc_noop);
+ set_gdbarch_frame_init_saved_regs (gdbarch, mn10300_frame_init_saved_regs);
+ set_gdbarch_frame_chain (gdbarch, mn10300_frame_chain);
+ set_gdbarch_frame_saved_pc (gdbarch, mn10300_frame_saved_pc);
+ set_gdbarch_extract_return_value (gdbarch, mn10300_extract_return_value);
+ set_gdbarch_extract_struct_value_address
+ (gdbarch, mn10300_extract_struct_value_address);
+ set_gdbarch_store_return_value (gdbarch, mn10300_store_return_value);
+ set_gdbarch_store_struct_return (gdbarch, mn10300_store_struct_return);
+ set_gdbarch_pop_frame (gdbarch, mn10300_pop_frame);
+ set_gdbarch_skip_prologue (gdbarch, mn10300_skip_prologue);
+ set_gdbarch_frame_args_skip (gdbarch, 0);
+ set_gdbarch_frame_args_address (gdbarch, default_frame_address);
+ set_gdbarch_frame_locals_address (gdbarch, default_frame_address);
+ set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
+ /* That's right, we're using the stack pointer as our frame pointer. */
+ set_gdbarch_read_fp (gdbarch, generic_target_read_sp);
+
+ /* Calling functions in the inferior from GDB. */
+ set_gdbarch_call_dummy_p (gdbarch, 1);
+ set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1);
+ set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
+ set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
+ set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT);
+ set_gdbarch_call_dummy_address (gdbarch, entry_point_address);
+ set_gdbarch_call_dummy_words (gdbarch, mn10300_call_dummy_words);
+ set_gdbarch_sizeof_call_dummy_words (gdbarch,
+ sizeof (mn10300_call_dummy_words));
+ set_gdbarch_call_dummy_length (gdbarch, 0);
+ set_gdbarch_fix_call_dummy (gdbarch, generic_fix_call_dummy);
+ set_gdbarch_call_dummy_start_offset (gdbarch, 0);
+ set_gdbarch_pc_in_call_dummy (gdbarch, pc_in_call_dummy_at_entry_point);
+ set_gdbarch_use_generic_dummy_frames (gdbarch, 1);
+ set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame);
+ set_gdbarch_push_arguments (gdbarch, mn10300_push_arguments);
+ set_gdbarch_reg_struct_has_addr (gdbarch, mn10300_reg_struct_has_addr);
+ set_gdbarch_push_return_address (gdbarch, mn10300_push_return_address);
+ set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
+ set_gdbarch_use_struct_convention (gdbarch, mn10300_use_struct_convention);
+
+ tdep->am33_mode = am33_mode;
+
+ return gdbarch;
+}
+
void
-_initialize_mn10300_tdep ()
+_initialize_mn10300_tdep (void)
{
/* printf("_initialize_mn10300_tdep\n"); */
tm_print_insn = print_insn_mn10300;
-}
+ register_gdbarch_init (bfd_arch_mn10300, mn10300_gdbarch_init);
+}