#if 0
/* FIXME: this extremely long init string causes MON960 to return two NAKS
instead of performing the autobaud recognition, at least when gdb
- is running on Linux. The short string below works on Linux, and on
+ is running on GNU/Linux. The short string below works on Linux, and on
SunOS using a tcp serial connection. Must retest on SunOS using a
direct serial connection; if that works, get rid of the long string. */
static char *mon960_inits[] = {"\n\r\r\r\r\r\r\r\r\r\r\r\r\r\r\n\r\n\r\n", NULL};
static char *mon960_inits[] = { "\r", NULL};
#endif
-static struct monitor_ops mon960_cmds =
+static struct monitor_ops mon960_cmds ;
+static void init_mon960_cmds(void)
{
- MO_CLR_BREAK_USES_ADDR
- | MO_NO_ECHO_ON_OPEN
- | MO_SEND_BREAK_ON_STOP
- | MO_GETMEM_READ_SINGLE, /* flags */
- mon960_inits, /* Init strings */
- "go\n\r", /* continue command */
- "st\n\r", /* single step */
- NULL, /* break interrupts the program */
- NULL, /* set a breakpoint */
- /* can't use "br" because only 2 hw bps are supported */
- NULL, /* clear a breakpoint - "de" is for hw bps */
+ mon960_cmds.flags = MO_CLR_BREAK_USES_ADDR
+ | MO_NO_ECHO_ON_OPEN | MO_SEND_BREAK_ON_STOP | MO_GETMEM_READ_SINGLE ; /* flags */
+ mon960_cmds.init = mon960_inits; /* Init strings */
+ mon960_cmds.cont = "go\n\r"; /* continue command */
+ mon960_cmds.step = "st\n\r"; /* single step */
+ mon960_cmds.stop = NULL; /* break interrupts the program */
+ mon960_cmds.set_break = NULL; /* set a breakpoint */
+ mon960_cmds.clr_break = /* can't use "br" because only 2 hw bps are supported */
+ mon960_cmds.clr_all_break = NULL; /* clear a breakpoint - "de" is for hw bps */
NULL, /* clear all breakpoints */
- NULL, /* fill (start end val) */
- /* can't use "fi" because it takes words, not bytes */
- {
- /* can't use "mb", "md" or "mo" because they require interaction */
- NULL, /* setmem.cmdb (addr, value) */
- NULL, /* setmem.cmdw (addr, value) */
- "md %x %x\n\r", /* setmem.cmdl (addr, value) */
- NULL, /* setmem.cmdll (addr, value) */
- NULL, /* setmem.resp_delim */
- NULL, /* setmem.term */
- NULL, /* setmem.term_cmd */
- },
- {
- /* since the parsing of multiple bytes is difficult due to
- interspersed addresses, we'll only read 1 value at a time,
- even tho these can handle a count */
- "db %x\n\r", /* getmem.cmdb (addr, #bytes) */
- "ds %x\n\r", /* getmem.cmdw (addr, #swords) */
- "di %x\n\r", /* getmem.cmdl (addr, #words) */
- "dd %x\n\r", /* getmem.cmdll (addr, #dwords) */
- " : ", /* getmem.resp_delim */
- NULL, /* getmem.term */
- NULL, /* getmem.term_cmd */
- },
- {
- "md %s %x\n\r", /* setreg.cmd (name, value) */
- NULL, /* setreg.resp_delim */
- NULL, /* setreg.term */
- NULL /* setreg.term_cmd */
- },
- {
- "di %s\n\r", /* getreg.cmd (name) */
- " : ", /* getreg.resp_delim */
- NULL, /* getreg.term */
- NULL, /* getreg.term_cmd */
- },
- "re\n\r", /* dump_registers */
- "\\(\\w+\\)=\\([0-9a-fA-F]+\\)", /* register_pattern */
- NULL, /* supply_register */
+ mon960_cmds.fill = NULL; /* fill (start end val) */
+ /* can't use "fi" because it takes words, not bytes */
+ /* can't use "mb", "md" or "mo" because they require interaction */
+ mon960_cmds.setmem.cmdb = NULL; /* setmem.cmdb (addr, value) */
+ mon960_cmds.setmem.cmdw = NULL; /* setmem.cmdw (addr, value) */
+ mon960_cmds.setmem.cmdl = "md %x %x\n\r"; /* setmem.cmdl (addr, value) */
+ mon960_cmds.setmem.cmdll = NULL; /* setmem.cmdll (addr, value) */
+ mon960_cmds.setmem.resp_delim = NULL; /* setmem.resp_delim */
+ mon960_cmds.setmem.term = NULL; /* setmem.term */
+ mon960_cmds.setmem.term_cmd = NULL; /* setmem.term_cmd */
+ /* since the parsing of multiple bytes is difficult due to
+ interspersed addresses, we'll only read 1 value at a time,
+ even tho these can handle a count */
+ mon960_cmds.getmem.cmdb = "db %x\n\r"; /* getmem.cmdb (addr, #bytes) */
+ mon960_cmds.getmem.cmdw = "ds %x\n\r"; /* getmem.cmdw (addr, #swords) */
+ mon960_cmds.getmem.cmdl = "di %x\n\r"; /* getmem.cmdl (addr, #words) */
+ mon960_cmds.getmem.cmdll = "dd %x\n\r"; /* getmem.cmdll (addr, #dwords) */
+ mon960_cmds.getmem.resp_delim = " : "; /* getmem.resp_delim */
+ mon960_cmds.getmem.term = NULL; /* getmem.term */
+ mon960_cmds.getmem.term_cmd = NULL; /* getmem.term_cmd */
+ mon960_cmds.setreg.cmd = "md %s %x\n\r"; /* setreg.cmd (name, value) */
+ mon960_cmds.setreg.resp_delim = NULL; /* setreg.resp_delim */
+ mon960_cmds.setreg.term = NULL; /* setreg.term */
+ mon960_cmds.setreg.term_cmd = NULL, /* setreg.term_cmd */
+ mon960_cmds.getreg.cmd = "di %s\n\r"; /* getreg.cmd (name) */
+ mon960_cmds.getreg.resp_delim = " : "; /* getreg.resp_delim */
+ mon960_cmds.getreg.term = NULL; /* getreg.term */
+ mon960_cmds.getreg.term_cmd = NULL; /* getreg.term_cmd */
+ mon960_cmds.dump_registers = "re\n\r"; /* dump_registers */
+ mon960_cmds.register_pattern = "\\(\\w+\\)=\\([0-9a-fA-F]+\\)"; /* register_pattern */
+ mon960_cmds.supply_register = NULL; /* supply_register */
#ifdef USE_GENERIC_LOAD
- NULL, /* load_routine (defaults to SRECs) */
- NULL, /* download command */
- NULL, /* load response */
+ mon960_cmds.load_routine = NULL; /* load_routine (defaults to SRECs) */
+ mon960_cmds.load = NULL; /* download command */
+ mon960_cmds.loadresp = NULL; /* load response */
#else
- mon960_load, /* load_routine (defaults to SRECs) */
- "do\n\r", /* download command */
- "Downloading\n\r", /* load response */
+ mon960_cmds.load_routine = mon960_load ; /* load_routine (defaults to SRECs) */
+ mon960_cmds.load = "do\n\r"; /* download command */
+ mon960_cmds.loadresp = "Downloading\n\r" ;/* load response */
#endif
- "=>", /* monitor command prompt */
- "\n\r", /* end-of-command delimitor */
- NULL, /* optional command terminator */
- &mon960_ops, /* target operations */
- SERIAL_1_STOPBITS, /* number of stop bits */
- mon960_regnames, /* registers names */
- MONITOR_OPS_MAGIC /* magic */
+ mon960_cmds.prompt = "=>"; /* monitor command prompt */
+ mon960_cmds.line_term = "\n\r"; /* end-of-command delimitor */
+ mon960_cmds.cmd_end = NULL; /* optional command terminator */
+ mon960_cmds.target = &mon960_ops; /* target operations */
+ mon960_cmds.stopbits = SERIAL_1_STOPBITS; /* number of stop bits */
+ mon960_cmds.regnames = mon960_regnames; /* registers names */
+ mon960_cmds.magic = MONITOR_OPS_MAGIC; /* magic */
};
static void
projects / deliverable / binutils-gdb.git / blobdiff