/* Remote debugging interface for boot monitors, for GDB.
- Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993, 1995 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
This file is part of GDB.
This module talks to a debug monitor called 'MONITOR', which
We communicate with MONITOR via either a direct serial line, or a TCP
(or possibly TELNET) stream to a terminal multiplexor,
- which in turn talks to the target board.
-*/
+ which in turn talks to the target board. */
#include "defs.h"
#include "gdbcore.h"
#include "target.h"
#include "wait.h"
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
#include <varargs.h>
+#endif
#include <signal.h>
#include <string.h>
#include <sys/types.h>
#include "command.h"
#include "serial.h"
#include "monitor.h"
-#include "remote-utils.h"
+#include "gdbcmd.h"
+#include "inferior.h"
+#include "regex.h"
+#include "dcache.h"
-#if !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && !defined (HAVE_SGTTY)
-#define HAVE_SGTTY
-#endif
+static int readchar PARAMS ((int timeout));
-#ifdef HAVE_TERMIOS
-#include <termio.h>
-#include <termios.h>
-# define TERMINAL struct termios
-#else
-#include <fcntl.h>
-# define TERMINAL struct sgttyb
-#endif
-#include "terminal.h"
-#ifndef CSTOPB
-#define CSTOPB 0x00000040
-#endif
+static void monitor_command PARAMS ((char *args, int fromtty));
+static void monitor_load_srec PARAMS ((char *args));
-#define SWAP_TARGET_AND_HOST(buffer,len) \
- do \
- { \
- if (TARGET_BYTE_ORDER != HOST_BYTE_ORDER) \
- { \
- char tmp; \
- char *p = (char *)(buffer); \
- char *q = ((char *)(buffer)) + len - 1; \
- for (; p < q; p++, q--) \
- { \
- tmp = *q; \
- *q = *p; \
- *p = tmp; \
- } \
- } \
- } \
- while (0)
-
-
-extern void make_xmodem_packet();
-extern void print_xmodem_packet();
-
-struct monitor_ops *current_monitor;
-extern struct cmd_list_element *setlist;
-extern struct cmd_list_element *unsetlist;
-struct cmd_list_element *showlist;
-extern char *version;
-extern char *host_name;
-extern char *target_name;
-
-static int hashmark; /* flag set by "set hash" */
-
-#define LOG_FILE "monitor.log"
-#if defined (LOG_FILE)
-FILE *log_file;
-#endif
+static int monitor_make_srec PARAMS ((char *buffer, int type,
+ CORE_ADDR memaddr,
+ unsigned char *myaddr, int len));
-static int timeout = 24;
+static void monitor_fetch_register PARAMS ((int regno));
+static void monitor_store_register PARAMS ((int regno));
-/*
- * Descriptor for I/O to remote machine. Initialize it to NULL so that
- * monitor_open knows that we don't have a file open when the program starts.
- */
-serial_t monitor_desc = NULL;
+static void monitor_close PARAMS ((int quitting));
+static void monitor_detach PARAMS ((char *args, int from_tty));
+static void monitor_resume PARAMS ((int pid, int step, enum target_signal sig));
+static void monitor_interrupt PARAMS ((int signo));
+static void monitor_interrupt_twice PARAMS ((int signo));
+static void monitor_interrupt_query PARAMS ((void));
+static void monitor_wait_cleanup PARAMS ((int old_timeout));
-/* sets the download protocol, choices are srec, generic, boot */
-char *loadtype;
-static char *loadtype_str;
-static char *loadproto_str;
-static void set_loadtype_command();
-static void set_loadproto_command();
-static void monitor_load_srec();
-static int monitor_write_srec();
+static int monitor_wait PARAMS ((int pid, struct target_waitstatus *status));
+static void monitor_fetch_registers PARAMS ((int regno));
+static void monitor_store_registers PARAMS ((int regno));
+static void monitor_prepare_to_store PARAMS ((void));
+static int monitor_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len, int write, struct target_ops *target));
+static void monitor_files_info PARAMS ((struct target_ops *ops));
+static int monitor_insert_breakpoint PARAMS ((CORE_ADDR addr, char *shadow));
+static int monitor_remove_breakpoint PARAMS ((CORE_ADDR addr, char *shadow));
+static void monitor_kill PARAMS ((void));
+static void monitor_load PARAMS ((char *file, int from_tty));
+static void monitor_mourn_inferior PARAMS ((void));
+static void monitor_stop PARAMS ((void));
-/*
- * these definitions are for xmodem protocol
- */
-#define SOH 0x01
-#define ACK 0x06
-#define NAK 0x15
-#define EOT 0x04
-#define CANCEL 0x18
-#define GETACK getacknak(ACK)
-#define GETNAK getacknak(NAK)
-#define XMODEM_DATASIZE 128 /* the data size is ALWAYS 128 */
-#define XMODEM_PACKETSIZE 131 /* the packet size is ALWAYS 132 (zero based) */
-#define XMODEM 1
+static int monitor_read_memory PARAMS ((CORE_ADDR addr, char *myaddr,int len));
+static int monitor_write_memory PARAMS ((CORE_ADDR addr, char *myaddr,int len));
-/*
- * set_loadtype_command -- set the type for downloading. Check to make
- * sure you have a support protocol for this target.
- */
-static void
-set_loadtype_command (ignore, from_tty, c)
- char *ignore;
- int from_tty;
- struct cmd_list_element *c;
-{
- char *tmp;
- char *type;
+static int from_hex PARAMS ((int a));
+static unsigned long get_hex_word PARAMS ((void));
- if (current_monitor == 0x0)
- return;
+static struct monitor_ops *current_monitor;
- if (STREQ (LOADTYPES, "")) {
- error ("No loadtype set");
- return;
- }
-
- tmp = savestring (LOADTYPES, strlen(LOADTYPES));
- type = strtok(tmp, ",");
- if (STREQ (type, (*(char **) c->var))) {
- loadtype_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
- return;
- }
-
- while ((type = strtok (NULL, ",")) != (char *)NULL) {
- if (STREQ (type, (*(char **) c->var)))
- loadtype_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
- return;
- }
- free (tmp);
- error ("Loadtype \"%s\" does not exist.", (*(char **) c->var));
-}
-/*
- * set_loadproto_command -- set the protocol for downloading. Check to make
- * sure you have a supported protocol for this target.
- */
-static void
-set_loadproto_command (ignore, from_tty, c)
- char *ignore;
- int from_tty;
- struct cmd_list_element *c;
-{
- char *tmp;
- char *type;
+static int hashmark; /* flag set by "set hash" */
- if (current_monitor == 0x0)
- return;
+static int timeout = 30;
- if (STREQ (LOADPROTOS, "")) {
- error ("No load protocols set");
- return;
- }
-
- tmp = savestring (LOADPROTOS, strlen(LOADPROTOS));
- type = strtok(tmp, ",");
- if (STREQ (type, (*(char **) c->var))) {
- loadproto_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
- return;
- }
-
- while ((type = strtok (NULL, ",")) != (char *)NULL) {
- if (STREQ (type, (*(char **) c->var)))
- loadproto_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
- return;
- }
- free (tmp);
- error ("Load protocol \"%s\" does not exist.", (*(char **) c->var));
-}
+static int in_monitor_wait = 0; /* Non-zero means we are in monitor_wait() */
-/*
- * printf_monitor -- send data to monitor. Works just like printf.
- */
-static void
-printf_monitor(va_alist)
+static void (*ofunc)(); /* Old SIGINT signal handler */
+
+/* Descriptor for I/O to remote machine. Initialize it to NULL so
+ that monitor_open knows that we don't have a file open when the
+ program starts. */
+
+static serial_t monitor_desc = NULL;
+
+/* Pointer to regexp pattern matching data */
+
+static struct re_pattern_buffer register_pattern;
+
+/* Element 0 points to start of register name, and element 1 points to the
+ start of the register value. */
+
+static struct re_registers register_strings;
+
+static char fastmap[256];
+
+static int dump_reg_flag; /* Non-zero means do a dump_registers cmd when
+ monitor_wait wakes up. */
+
+static DCACHE *remote_dcache;
+
+/* monitor_printf_noecho -- Send data to monitor, but don't expect an echo.
+ Works just like printf. */
+
+void
+#ifdef ANSI_PROTOTYPES
+monitor_printf_noecho (char *pattern, ...)
+#else
+monitor_printf_noecho (va_alist)
va_dcl
+#endif
{
va_list args;
+ char sndbuf[2000];
+ int len;
+
+#if ANSI_PROTOTYPES
+ va_start (args, pattern);
+#else
char *pattern;
- char buf[200];
- int i;
+ va_start (args);
+ pattern = va_arg (args, char *);
+#endif
- va_start(args);
+ vsprintf (sndbuf, pattern, args);
- pattern = va_arg(args, char *);
+ if (remote_debug > 0)
+ fputs_unfiltered (sndbuf, gdb_stderr);
- vsprintf(buf, pattern, args);
+ len = strlen (sndbuf);
- debuglogs (1, "printf_monitor(), Sending: \"%s\".", buf);
+ if (len + 1 > sizeof sndbuf)
+ abort ();
- if (SERIAL_WRITE(monitor_desc, buf, strlen(buf)))
- fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
+ if (SERIAL_WRITE(monitor_desc, sndbuf, len))
+ fprintf_unfiltered (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
}
-/*
- * write_monitor -- send raw data to monitor.
- */
-static void
-write_monitor(data, len)
- char data[];
- int len;
-{
- if (SERIAL_WRITE(monitor_desc, data, len))
- fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
-
- *(data + len+1) = '\0';
- debuglogs (1, "write_monitor(), Sending: \"%s\".", data);
-}
+/* monitor_printf -- Send data to monitor and check the echo. Works just like
+ printf. */
-/*
- * debuglogs -- deal with debugging info to multiple sources. This takes
- * two real args, the first one is the level to be compared against
- * the sr_get_debug() value, the second arg is a printf buffer and args
- * to be formatted and printed. A CR is added after each string is printed.
- */
void
-debuglogs(va_alist)
+#ifdef ANSI_PROTOTYPES
+monitor_printf (char *pattern, ...)
+#else
+monitor_printf (va_alist)
va_dcl
+#endif
{
va_list args;
- char *pattern, *p;
- char buf[200];
- char newbuf[300];
- int level, i;
+ char sndbuf[2000];
+ int len;
+ int i, c;
- va_start(args);
+#ifdef ANSI_PROTOTYPES
+ va_start (args, pattern);
+#else
+ char *pattern;
+ va_start (args);
+ pattern = va_arg (args, char *);
+#endif
- level = va_arg(args, int); /* get the debug level */
- if ((level <0) || (level > 100)) {
- error ("Bad argument passed to debuglogs(), needs debug level");
- return;
- }
-
- pattern = va_arg(args, char *); /* get the printf style pattern */
+ vsprintf (sndbuf, pattern, args);
- vsprintf(buf, pattern, args); /* format the string */
-
- /* convert some characters so it'll look right in the log */
- p = newbuf;
- for (i=0 ; buf[i] != '\0'; i++) {
- switch (buf[i]) {
- case '\n': /* newlines */
- *p++ = '\\';
- *p++ = 'n';
- continue;
- case '\r': /* carriage returns */
- *p++ = '\\';
- *p++ = 'r';
- continue;
- case '\033': /* escape */
- *p++ = '\\';
- *p++ = 'e';
- continue;
- case '\t': /* tab */
- *p++ = '\\';
- *p++ = 't';
- continue;
- case '\b': /* backspace */
- *p++ = '\\';
- *p++ = 'b';
- continue;
- default: /* no change */
- *p++ = buf[i];
- }
+ if (remote_debug > 0)
+ fputs_unfiltered (sndbuf, gdb_stderr);
- if (buf[i] < 26) { /* modify control characters */
- *p++ = '^';
- *p++ = buf[i] + 'A';
- continue;
- }
- }
- *p = '\0'; /* terminate the string */
+ len = strlen (sndbuf);
- if (sr_get_debug() > level)
- puts (newbuf);
+ if (len + 1 > sizeof sndbuf)
+ abort ();
-#ifdef LOG_FILE /* write to the monitor log */
- if (log_file != 0x0) {
- fputs (newbuf, log_file);
- fputc ('\n', log_file);
- fflush (log_file);
- }
+ if (SERIAL_WRITE(monitor_desc, sndbuf, len))
+ fprintf_unfiltered (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
+
+ for (i = 0; i < len; i++)
+ {
+ trycr:
+ c = readchar (timeout);
+
+ if (c != sndbuf[i])
+ {
+ /* Don't fail if we sent a ^C, they're never echoed */
+ if (sndbuf[i] == '\003')
+ continue;
+#if 0
+ if (sndbuf[i] == '\r'
+ && c == '\n')
+ goto trycr;
#endif
+ warning ("monitor_printf: Bad echo. Sent: \"%s\", Got: \"%.*s%c\".",
+ sndbuf, i, sndbuf, c);
+ }
+ }
}
-/* readchar -- read a character from the remote system, doing all the fancy
- * timeout stuff.
- */
+/* Read a character from the remote system, doing all the fancy
+ timeout stuff. */
+
static int
-readchar(timeout)
+readchar (timeout)
int timeout;
{
int c;
- c = SERIAL_READCHAR(monitor_desc, timeout);
-
- if (sr_get_debug() > 5)
- putchar(c & 0x7f);
+ c = SERIAL_READCHAR (monitor_desc, timeout);
-#ifdef LOG_FILE
- if (isascii (c))
- putc(c & 0x7f, log_file);
-#endif
+ if (remote_debug > 0)
+ fputc_unfiltered (c, gdb_stderr);
if (c >= 0)
return c & 0x7f;
- if (c == SERIAL_TIMEOUT) {
- if (timeout == 0)
- return c; /* Polls shouldn't generate timeout errors */
- error("Timeout reading from remote system.");
-#ifdef LOG_FILE
- fputs ("ERROR: Timeout reading from remote system", log_file);
+ if (c == SERIAL_TIMEOUT)
+#ifdef MAINTENANCE_CMDS
+ if (in_monitor_wait) /* Watchdog went off */
+ {
+ target_mourn_inferior ();
+ error ("Watchdog has expired. Target detached.\n");
+ }
+ else
#endif
- }
- perror_with_name("remote-monitor");
+ error ("Timeout reading from remote system.");
+
+ perror_with_name ("remote-monitor");
}
-/*
- * expect -- scan input from the remote system, until STRING is found.
- * If DISCARD is non-zero, then discard non-matching input, else print
- * it out. Let the user break out immediately.
- */
-static void
-expect (string, discard)
+/* Scan input from the remote system, until STRING is found. If BUF is non-
+ zero, then collect input until we have collected either STRING or BUFLEN-1
+ chars. In either case we terminate BUF with a 0. If input overflows BUF
+ because STRING can't be found, return -1, else return number of chars in BUF
+ (minus the terminating NUL). Note that in the non-overflow case, STRING
+ will be at the end of BUF. */
+
+int
+monitor_expect (string, buf, buflen)
char *string;
- int discard;
+ char *buf;
+ int buflen;
{
char *p = string;
+ int obuflen = buflen;
int c;
-
- debuglogs (1, "Expecting \"%s\".", string);
-
immediate_quit = 1;
- while (1) {
- c = readchar(timeout);
- if (!isascii (c))
- continue;
- if (c == *p++) {
- if (*p == '\0') {
- immediate_quit = 0;
- debuglogs (4, "Matched");
- return;
- }
- } else {
- if (!discard) {
- fwrite(string, 1, (p - 1) - string, stdout);
- putchar((char)c);
- fflush(stdout);
- }
- p = string;
+ while (1)
+ {
+ if (buf)
+ {
+ if (buflen < 2)
+ {
+ *buf = '\000';
+ immediate_quit = 0;
+ return -1;
+ }
+
+ c = readchar (timeout);
+ *buf++ = c;
+ buflen--;
+ }
+ else
+ c = readchar (timeout);
+
+ if (c == *p++)
+ {
+ if (*p == '\0')
+ {
+ immediate_quit = 0;
+
+ if (buf)
+ {
+ *buf++ = '\000';
+ return obuflen - buflen;
+ }
+ else
+ return 0;
+ }
+ }
+ else
+ {
+ p = string;
+ if (c == *p)
+ p++;
+ }
}
- }
}
/* Keep discarding input until we see the MONITOR prompt.
o *then* wait for the prompt.
Thus the last thing that a procedure does with the serial line
- will be an expect_prompt(). Exception: monitor_resume does not
+ will be an monitor_expect_prompt(). Exception: monitor_resume does not
wait for the prompt, because the terminal is being handed over
to the inferior. However, the next thing which happens after that
is a monitor_wait which does wait for the prompt.
Note that this includes abnormal exit, e.g. error(). This is
necessary to prevent getting into states from which we can't
recover. */
-static void
-expect_prompt(discard)
- int discard;
-{
- expect (PROMPT, discard);
-}
-
-/*
- * junk -- ignore junk characters. Returns a 1 if junk, 0 otherwise
- */
-static int
-junk(ch)
- char ch;
-{
- switch (ch) {
- case '\0':
- case ' ':
- case '-':
- case '\t':
- case '\r':
- case '\n':
- if (sr_get_debug() > 5)
- debuglogs (5, "Ignoring \'%c\'.", ch);
- return 1;
- default:
- if (sr_get_debug() > 5)
- debuglogs (5, "Accepting \'%c\'.", ch);
- return 0;
- }
-}
-/*
- * get_hex_digit -- Get a hex digit from the remote system & return its value.
- * If ignore is nonzero, ignore spaces, newline & tabs.
- */
-static int
-get_hex_digit(ignore)
- int ignore;
+int
+monitor_expect_prompt (buf, buflen)
+ char *buf;
+ int buflen;
{
- static int ch;
- while (1) {
- ch = readchar(timeout);
- if (junk(ch))
- continue;
- if (sr_get_debug() > 4) {
- debuglogs (4, "get_hex_digit() got a 0x%x(%c)", ch, ch);
- } else {
-#ifdef LOG_FILE /* write to the monitor log */
- if (log_file != 0x0) {
- fputs ("get_hex_digit() got a 0x", log_file);
- fputc (ch, log_file);
- fputc ('\n', log_file);
- fflush (log_file);
- }
-#endif
- }
-
- if (ch >= '0' && ch <= '9')
- return ch - '0';
- else if (ch >= 'A' && ch <= 'F')
- return ch - 'A' + 10;
- else if (ch >= 'a' && ch <= 'f')
- return ch - 'a' + 10;
- else if (ch == ' ' && ignore)
- ;
- else {
- expect_prompt(1);
- debuglogs (4, "Invalid hex digit from remote system. (0x%x)", ch);
- error("Invalid hex digit from remote system. (0x%x)", ch);
- }
- }
+ return monitor_expect (PROMPT, buf, buflen);
}
-/* get_hex_byte -- Get a byte from monitor and put it in *BYT.
- * Accept any number leading spaces.
- */
-static void
-get_hex_byte (byt)
- char *byt;
-{
- int val;
-
- val = get_hex_digit (1) << 4;
- debuglogs (4, "get_hex_byte() -- Read first nibble 0x%x", val);
-
- val |= get_hex_digit (0);
- debuglogs (4, "get_hex_byte() -- Read second nibble 0x%x", val);
- *byt = val;
-
- debuglogs (4, "get_hex_byte() -- Read a 0x%x", val);
-}
+/* Get N 32-bit words from remote, each preceded by a space, and put
+ them in registers starting at REGNO. */
-/*
- * get_hex_word -- Get N 32-bit words from remote, each preceded by a space,
- * and put them in registers starting at REGNO.
- */
-static int
+static unsigned long
get_hex_word ()
{
- long val, newval;
+ unsigned long val;
int i;
+ int ch;
- val = 0;
+ do
+ ch = readchar (timeout);
+ while (isspace(ch));
-#if 0
- if (HOST_BYTE_ORDER == BIG_ENDIAN) {
-#endif
- for (i = 0; i < 8; i++)
- val = (val << 4) + get_hex_digit (i == 0);
-#if 0
- } else {
- for (i = 7; i >= 0; i--)
- val = (val << 4) + get_hex_digit (i == 0);
- }
-#endif
+ val = from_hex (ch);
- debuglogs (4, "get_hex_word() got a 0x%x for a %s host.", val, (HOST_BYTE_ORDER == BIG_ENDIAN) ? "big endian" : "little endian");
+ for (i = 7; i >= 1; i--)
+ {
+ ch = readchar (timeout);
+ if (!isxdigit (ch))
+ break;
+ val = (val << 4) | from_hex (ch);
+ }
return val;
}
-/* This is called not only when we first attach, but also when the
- user types "run" after having attached. */
+/* Open a connection to a remote debugger. NAME is the filename used
+ for communication. */
+
+static char *dev_name;
+static struct target_ops *targ_ops;
+
void
-monitor_create_inferior (execfile, args, env)
- char *execfile;
+monitor_open (args, mon_ops, from_tty)
char *args;
- char **env;
+ struct monitor_ops *mon_ops;
+ int from_tty;
{
- int entry_pt;
+ char *name;
+ int i;
+ char **p;
- if (args && *args)
- error("Can't pass arguments to remote MONITOR process");
+ if (mon_ops->magic != MONITOR_OPS_MAGIC)
+ error ("Magic number of monitor_ops struct wrong.");
- if (execfile == 0 || exec_bfd == 0)
- error("No exec file specified");
+ targ_ops = mon_ops->target;
+ name = targ_ops->to_shortname;
- entry_pt = (int) bfd_get_start_address (exec_bfd);
+ if (!args)
+ error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\
+`target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name);
- debuglogs (3, "create_inferior(exexfile=%s, args=%s, env=%s)", execfile, args, env);
+ target_preopen (from_tty);
-/* The "process" (board) is already stopped awaiting our commands, and
- the program is already downloaded. We just set its PC and go. */
+ /* Setup pattern for register dump */
- clear_proceed_status ();
+ if (mon_ops->register_pattern)
+ {
+ int tmp;
+ char *val;
- /* Tell wait_for_inferior that we've started a new process. */
- init_wait_for_inferior ();
+ register_pattern.fastmap = fastmap;
+ tmp = re_set_syntax (RE_SYNTAX_EMACS);
+ val = re_compile_pattern (mon_ops->register_pattern,
+ strlen (mon_ops->register_pattern),
+ ®ister_pattern);
+ re_set_syntax (tmp);
+ if (val)
+ error ("Can't compiler register pattern string: %s!", val);
+ re_compile_fastmap (®ister_pattern);
+ }
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- target_terminal_init ();
+ unpush_target (targ_ops);
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
+ if (dev_name)
+ free (dev_name);
+ dev_name = strsave (args);
- /* insert_step_breakpoint (); FIXME, do we need this? */
+ monitor_desc = SERIAL_OPEN (dev_name);
- /* Let 'er rip... */
- proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);
-}
+ if (!monitor_desc)
+ perror_with_name (dev_name);
-/*
- * monitor_open -- open a connection to a remote debugger.
- * NAME is the filename used for communication.
- */
-static int baudrate = 9600;
-static char dev_name[100];
+ if (baud_rate != -1)
+ {
+ if (SERIAL_SETBAUDRATE (monitor_desc, baud_rate))
+ {
+ SERIAL_CLOSE (monitor_desc);
+ perror_with_name (dev_name);
+ }
+ }
+
+ SERIAL_RAW (monitor_desc);
-void
-monitor_open(args, name, from_tty)
- char *args;
- char *name;
- int from_tty;
-{
- TERMINAL *temptempio;
+ SERIAL_FLUSH_INPUT (monitor_desc);
- if (args == NULL)
- error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\
-`target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name);
+ /* some systems only work with 2 stop bits */
-/* if (is_open) */
- monitor_close(0);
+ SERIAL_SETSTOPBITS (monitor_desc, mon_ops->stopbits);
- strcpy(dev_name, args);
- monitor_desc = SERIAL_OPEN(dev_name);
+ current_monitor = mon_ops;
- if (monitor_desc == NULL)
- perror_with_name(dev_name);
+ /* See if we can wake up the monitor. First, try sending a stop sequence,
+ then send the init strings. Last, remove all breakpoints. */
- if (baud_rate != -1) {
- if (SERIAL_SETBAUDRATE (monitor_desc, baud_rate)) {
- SERIAL_CLOSE (monitor_desc);
- perror_with_name (name);
+ if (current_monitor->stop)
+ {
+ monitor_stop ();
+ monitor_expect_prompt (NULL, 0);
}
- }
-
- SERIAL_RAW(monitor_desc);
-
-#ifndef __GO32__
- /* some systems only work with 2 stop bits */
- if (STOPBITS == 2) {
- temptempio = (TERMINAL *)SERIAL_GET_TTY_STATE(monitor_desc);
-#ifdef HAVE_SGTTY
- temptempio->sg_cflag |= baud_rate | CSTOPB;
-#else
- temptempio->c_cflag |= baud_rate | CSTOPB;
-#endif
- SERIAL_SET_TTY_STATE(monitor_desc, temptempio);
- debuglogs (4, "Set serial port to 2 stop bits");
- }
-#endif /* __GO32__ */
-
-#if defined (LOG_FILE)
- log_file = fopen (LOG_FILE, "w");
- if (log_file == NULL)
- perror_with_name (LOG_FILE);
- fprintf_filtered (log_file, "GDB %s (%s", version, host_name);
- fprintf_filtered (log_file, " --target %s)\n", target_name);
- fprintf_filtered (log_file, "Remote target %s connected to %s\n\n", TARGET_NAME, dev_name);
-#endif
/* wake up the monitor and see if it's alive */
- printf_monitor(INIT_CMD);
- expect_prompt(1); /* See if we get a prompt */
+ for (p = mon_ops->init; *p != NULL; p++)
+ {
+ monitor_printf (*p);
+ monitor_expect_prompt (NULL, 0);
+ }
+
+ SERIAL_FLUSH_INPUT (monitor_desc);
- /* try again to be sure */
- printf_monitor(INIT_CMD);
- expect_prompt(1); /* See if we get a prompt */
+ /* Remove all breakpoints */
+
+ if (mon_ops->clr_all_break)
+ {
+ monitor_printf (mon_ops->clr_all_break);
+ monitor_expect_prompt (NULL, 0);
+ }
if (from_tty)
- printf("Remote target %s connected to %s\n", TARGET_NAME, dev_name);
+ printf_unfiltered ("Remote target %s connected to %s\n", name, dev_name);
+
+ push_target (targ_ops);
+
+ inferior_pid = 42000; /* Make run command think we are busy... */
+
+ /* Give monitor_wait something to read */
+
+ monitor_printf (current_monitor->line_term);
+
+ remote_dcache = dcache_init (monitor_read_memory, monitor_write_memory);
+
+ start_remote ();
}
-/*
- * monitor_close -- Close out all files and local state before this
- * target loses control.
- */
+/* Close out all files and local state before this target loses
+ control. */
-void
+static void
monitor_close (quitting)
int quitting;
{
- SERIAL_CLOSE(monitor_desc);
+ if (monitor_desc)
+ SERIAL_CLOSE (monitor_desc);
monitor_desc = NULL;
+}
- debuglogs (1, "monitor_close (quitting=%d)", quitting);
+/* Terminate the open connection to the remote debugger. Use this
+ when you want to detach and do something else with your gdb. */
-#if defined (LOG_FILE)
- if (log_file) {
- if (ferror(log_file))
- fprintf(stderr, "Error writing log file.\n");
- if (fclose(log_file) != 0)
- fprintf(stderr, "Error closing log file.\n");
- }
-#endif
+static void
+monitor_detach (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ pop_target (); /* calls monitor_close to do the real work */
+ if (from_tty)
+ printf_unfiltered ("Ending remote %s debugging\n", target_shortname);
}
-/*
- * monitor_detach -- terminate the open connection to the remote
- * debugger. Use this when you want to detach and do something
- * else with your gdb.
- */
-void
-monitor_detach (from_tty)
- int from_tty;
+/* Convert VALSTR into the target byte-ordered value of REGNO and store it. */
+
+char *
+monitor_supply_register (regno, valstr)
+ int regno;
+ char *valstr;
{
+ unsigned LONGEST val;
+ unsigned char regbuf[MAX_REGISTER_RAW_SIZE];
+ char *p;
- debuglogs (1, "monitor_detach ()");
+ val = strtoul (valstr, &p, 16);
- pop_target(); /* calls monitor_close to do the real work */
- if (from_tty)
- printf ("Ending remote %s debugging\n", target_shortname);
+ if (val == 0 && valstr == p)
+ error ("monitor_supply_register (%d): bad value from monitor: %s.",
+ regno, valstr);
+
+ /* supply register stores in target byte order, so swap here */
+
+ store_unsigned_integer (regbuf, REGISTER_RAW_SIZE (regno), val);
+
+ supply_register (regno, regbuf);
+
+ return p;
}
-/*
- * monitor_attach -- attach GDB to the target.
- */
-void
-monitor_attach (args, from_tty)
- char *args;
- int from_tty;
+/* Tell the remote machine to resume. */
+
+static void
+monitor_resume (pid, step, sig)
+ int pid, step;
+ enum target_signal sig;
{
- if (from_tty)
- printf ("Starting remote %s debugging\n", target_shortname);
-
- debuglogs (1, "monitor_attach (args=%s)", args);
+ dcache_flush (remote_dcache);
+ if (step)
+ monitor_printf (STEP_CMD);
+ else
+ {
+ monitor_printf (CONT_CMD);
+ if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT)
+ dump_reg_flag = 1;
+ }
+}
+
+/* Parse the output of a register dump command. A monitor specific regexp is
+ used to extract individual register descriptions of the form REG=VAL. Each
+ description is split up into a name and a value string which are passed down
+ to monitor specific code. */
+
+static char *
+parse_register_dump (buf, len)
+ char *buf;
+ int len;
+{
+ while (1)
+ {
+ int regnamelen, vallen;
+ char *regname, *val;
+
+ if (re_search (®ister_pattern, buf, len, 0, len,
+ ®ister_strings) == -1)
+ break;
+
+ regnamelen = register_strings.end[1] - register_strings.start[1];
+ regname = buf + register_strings.start[1];
+ vallen = register_strings.end[2] - register_strings.start[2];
+ val = buf + register_strings.start[2];
+
+ current_monitor->supply_register (regname, regnamelen, val, vallen);
+
+ buf += register_strings.end[0];
+ len -= register_strings.end[0];
+ }
+}
+
+/* Send ^C to target to halt it. Target will respond, and send us a
+ packet. */
+
+static void
+monitor_interrupt (signo)
+ int signo;
+{
+ /* If this doesn't work, try more severe steps. */
+ signal (signo, monitor_interrupt_twice);
- printf_monitor (GO_CMD);
- /* swallow the echo. */
- expect (GO_CMD, 1);
+ if (remote_debug)
+ printf_unfiltered ("monitor_interrupt called\n");
+
+ target_stop ();
}
+
+/* The user typed ^C twice. */
+
+static void
+monitor_interrupt_twice (signo)
+ int signo;
+{
+ signal (signo, ofunc);
-/*
- * monitor_resume -- Tell the remote machine to resume.
- */
-void
-monitor_resume (pid, step, sig)
- int pid, step;
- enum target_signal sig;
+ monitor_interrupt_query ();
+
+ signal (signo, monitor_interrupt);
+}
+
+/* Ask the user what to do when an interrupt is received. */
+
+static void
+monitor_interrupt_query ()
{
- debuglogs (1, "monitor_resume (step=%d, sig=%d)", step, sig);
+ target_terminal_ours ();
- if (step) {
- printf_monitor (STEP_CMD);
- } else {
- printf_monitor (CONT_CMD);
- }
+ if (query ("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? "))
+ {
+ target_mourn_inferior ();
+ return_to_top_level (RETURN_QUIT);
+ }
+
+ target_terminal_inferior ();
}
-/*
- * monitor_wait -- Wait until the remote machine stops, then return,
- * storing status in status just as `wait' would.
- */
-int
+static void
+monitor_wait_cleanup (old_timeout)
+ int old_timeout;
+{
+ timeout = old_timeout;
+ signal (SIGINT, ofunc);
+ in_monitor_wait = 0;
+}
+
+/* Wait until the remote machine stops, then return, storing status in
+ status just as `wait' would. */
+
+static int
monitor_wait (pid, status)
int pid;
struct target_waitstatus *status;
{
int old_timeout = timeout;
+ char buf[1024];
+ int resp_len;
+ struct cleanup *old_chain;
- debuglogs(1, "monitor_wait (), printing extraneous text.");
-
status->kind = TARGET_WAITKIND_EXITED;
status->value.integer = 0;
- timeout = 0; /* Don't time out -- user program is running. */
+ old_chain = make_cleanup (monitor_wait_cleanup, old_timeout);
+
+#ifdef MAINTENANCE_CMDS
+ in_monitor_wait = 1;
+ timeout = watchdog > 0 ? watchdog : -1;
+#else
+ timeout = -1; /* Don't time out -- user program is running. */
+#endif
- expect_prompt(0); /* Wait for prompt, outputting extraneous text */
- debuglogs (4, "monitor_wait(), got the prompt.");
+ ofunc = (void (*)()) signal (SIGINT, monitor_interrupt);
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = TARGET_SIGNAL_TRAP;
+ do
+ {
+ resp_len = monitor_expect_prompt (buf, sizeof (buf));
+ if (resp_len <= 0)
+ fprintf_unfiltered (gdb_stderr, "monitor_wait: excessive response from monitor: %s.", buf);
+ }
+ while (resp_len < 0);
+ signal (SIGINT, ofunc);
timeout = old_timeout;
- return 0;
+ if (dump_reg_flag && current_monitor->dump_registers)
+ {
+ dump_reg_flag = 0;
+
+ monitor_printf (current_monitor->dump_registers);
+ resp_len = monitor_expect_prompt (buf, sizeof (buf));
+ }
+
+ if (current_monitor->register_pattern)
+ parse_register_dump (buf, resp_len);
+
+ status->kind = TARGET_WAITKIND_STOPPED;
+ status->value.sig = TARGET_SIGNAL_TRAP;
+
+ discard_cleanups (old_chain);
+
+ in_monitor_wait = 0;
+
+ return inferior_pid;
}
-/* Return the name of register number regno in the form input and output by
- monitor. Currently, register_names just happens to contain exactly what
- monitor wants. Lets take advantage of that just as long as possible! */
+/* Fetch register REGNO, or all registers if REGNO is -1. Returns
+ errno value. */
-static char *
-get_reg_name (regno)
+static void
+monitor_fetch_register (regno)
int regno;
{
- static char buf[50];
- const char *p;
- char *b;
-
- b = buf;
+ char *name;
+ static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+ char regbuf[MAX_REGISTER_RAW_SIZE * 2 + 1];
+ int i;
+
+ name = REGNAMES (regno);
+
+ if (!name)
+ {
+ supply_register (regno, zerobuf);
+ return;
+ }
+
+ /* send the register examine command */
+
+ monitor_printf (current_monitor->getreg.cmd, name);
+
+/* If RESP_DELIM is specified, we search for that as a leading delimiter for
+ the register value. Otherwise, we just start searching from the start of
+ the buf. */
+
+ if (current_monitor->getreg.resp_delim)
+ monitor_expect (current_monitor->getreg.resp_delim, NULL, 0);
- if (regno < 0)
- return ("");
+/* Now, read the appropriate number of hex digits for this register, skipping
+ spaces. */
- for (p = REGNAMES(regno); *p; p++)
- *b++ = tolower(*p);
+ for (i = 0; i < REGISTER_RAW_SIZE (regno) * 2; i++)
+ {
+ int c;
- *b = '\000';
+ while (1)
+ {
+ c = readchar (timeout);
+ if (isxdigit (c))
+ break;
+ if (c == ' ')
+ continue;
- debuglogs (5, "Got name \"%s\" from regno #%d.", buf, regno);
+ error ("monitor_fetch_register (%d): bad response from monitor: %.*s%c.",
+ regno, i, regbuf, c);
+ }
+
+ regbuf[i] = c;
+ }
+
+ regbuf[i] = '\000'; /* terminate the number */
+
+/* If TERM is present, we wait for that to show up. Also, (if TERM is
+ present), we will send TERM_CMD if that is present. In any case, we collect
+ all of the output into buf, and then wait for the normal prompt. */
+
+ if (current_monitor->getreg.term)
+ {
+ monitor_expect (current_monitor->getreg.term, NULL, 0); /* get response */
+
+ if (current_monitor->getreg.term_cmd)
+ {
+ monitor_printf (current_monitor->getreg.term_cmd);
+ monitor_expect_prompt (NULL, 0);
+ }
+ }
+ else
+ monitor_expect_prompt (NULL, 0); /* get response */
- return buf;
+ monitor_supply_register (regno, regbuf);
}
-/*
- * monitor_fetch_registers -- read the remote registers into the
- * block regs.
- */
-void
-monitor_fetch_registers ()
+/* Read the remote registers into the block regs. */
+
+static void monitor_dump_regs ()
{
- int regno;
+ if (current_monitor->dump_registers)
+ {
+ char buf[200];
+ int resp_len;
+ monitor_printf (current_monitor->dump_registers);
+ resp_len = monitor_expect_prompt (buf, sizeof (buf));
+ parse_register_dump (buf, resp_len);
+ }
+ else
+ abort(); /* Need some way to read registers */
+}
- /* yeah yeah, i know this is horribly inefficient. but it isn't done
- very often... i'll clean it up later. */
+static void
+monitor_fetch_registers (regno)
+ int regno;
+{
+ if (current_monitor->getreg.cmd)
+ {
+ if (regno >= 0)
+ {
+ monitor_fetch_register (regno);
+ return;
+ }
- for (regno = 0; regno <= PC_REGNUM; regno++)
- monitor_fetch_register(regno);
+ for (regno = 0; regno < NUM_REGS; regno++)
+ monitor_fetch_register (regno);
+ }
+ else {
+ monitor_dump_regs ();
+ }
}
-/*
- * monitor_fetch_register -- fetch register REGNO, or all registers if REGNO
- * is -1. Returns errno value.
- */
-void
-monitor_fetch_register (regno)
+/* Store register REGNO, or all if REGNO == 0. Return errno value. */
+
+static void
+monitor_store_register (regno)
int regno;
{
- int newval, val, j;
+ char *name;
+ unsigned LONGEST val;
+
+ name = REGNAMES (regno);
+ if (!name)
+ return;
+
+ val = read_register (regno);
- debuglogs (1, "monitor_fetch_register (reg=%s)", get_reg_name (regno));
+ /* send the register deposit command */
- if (regno < 0) {
- monitor_fetch_registers ();
- } else {
- char *name = get_reg_name (regno);
- if (STREQ(name, ""))
+ monitor_printf (current_monitor->setreg.cmd, name, val);
+
+/* It's possible that there are actually some monitors out there that will
+ prompt you when you set a register. In that case, you may need to add some
+ code here to deal with TERM and TERM_CMD (see monitor_fetch_register to get
+ an idea of what's needed...) */
+
+ monitor_expect_prompt (NULL, 0);
+}
+
+/* Store the remote registers. */
+
+static void
+monitor_store_registers (regno)
+ int regno;
+{
+ if (regno >= 0)
+ {
+ monitor_store_register (regno);
return;
- printf_monitor (ROMCMD(GET_REG), name); /* send the command */
- expect (name, 1); /* then strip the leading garbage */
- if (*ROMDELIM(GET_REG) != 0) { /* if there's a delimiter */
- expect (ROMDELIM(GET_REG), 1);
}
-
- val = get_hex_word(); /* get the value, ignore junk */
+ for (regno = 0; regno < NUM_REGS; regno++)
+ monitor_store_register (regno);
+}
+
+/* Get ready to modify the registers array. On machines which store
+ individual registers, this doesn't need to do anything. On machines
+ which store all the registers in one fell swoop, this makes sure
+ that registers contains all the registers from the program being
+ debugged. */
+
+static void
+monitor_prepare_to_store ()
+{
+ /* Do nothing, since we can store individual regs */
+}
+
+static void
+monitor_files_info (ops)
+ struct target_ops *ops;
+{
+ printf_unfiltered ("\tAttached to %s at %d baud.\n", dev_name, baud_rate);
+}
+
+static int
+monitor_write_memory (memaddr, myaddr, len)
+ CORE_ADDR memaddr;
+ unsigned char *myaddr;
+ int len;
+{
+ unsigned LONGEST val;
+ char *cmd;
+ int i;
+
+ /* Use memory fill command for leading 0 bytes. */
+
+ if (current_monitor->fill)
+ {
+ for (i = 0; i < len; i++)
+ if (myaddr[i] != 0)
+ break;
+
+ if (i > 4) /* More than 4 zeros is worth doing */
+ {
+ if (current_monitor->flags & MO_FILL_USES_ADDR)
+ monitor_printf (current_monitor->fill, memaddr, memaddr + i, 0);
+ else
+ monitor_printf (current_monitor->fill, memaddr, i, 0);
+
+ monitor_expect_prompt (NULL, 0);
+
+ return i;
+ }
+ }
+
+ if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->setmem.cmdll)
+ {
+ len = 8;
+ cmd = current_monitor->setmem.cmdll;
+ }
+ else if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->setmem.cmdl)
+ {
+ len = 4;
+ cmd = current_monitor->setmem.cmdl;
+ }
+ else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->setmem.cmdw)
+ {
+ len = 2;
+ cmd = current_monitor->setmem.cmdw;
+ }
+ else
+ {
+ len = 1;
+ cmd = current_monitor->setmem.cmdb;
+ }
+
+ val = extract_unsigned_integer (myaddr, len);
+
+ monitor_printf (cmd, memaddr, val);
+
+ monitor_expect_prompt (NULL, 0);
+
+ return len;
+}
+
+/* This is an alternate form of monitor_read_memory which is used for monitors
+ which can only read a single byte/word/etc. at a time. */
+
+static int
+monitor_read_memory_single (memaddr, myaddr, len)
+ CORE_ADDR memaddr;
+ unsigned char *myaddr;
+ int len;
+{
+ unsigned LONGEST val;
+ char membuf[sizeof(LONGEST) * 2 + 1];
+ char *p;
+ char *cmd;
+ int i;
+
+ if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->getmem.cmdll)
+ {
+ len = 8;
+ cmd = current_monitor->getmem.cmdll;
+ }
+ else if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->getmem.cmdl)
+ {
+ len = 4;
+ cmd = current_monitor->getmem.cmdl;
+ }
+ else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->getmem.cmdw)
+ {
+ len = 2;
+ cmd = current_monitor->getmem.cmdw;
+ }
+ else
+ {
+ len = 1;
+ cmd = current_monitor->getmem.cmdb;
+ }
+
+/* Send the examine command. */
+
+ monitor_printf (cmd, memaddr);
+
+/* If RESP_DELIM is specified, we search for that as a leading delimiter for
+ the register value. Otherwise, we just start searching from the start of
+ the buf. */
+
+ if (current_monitor->getmem.resp_delim)
+ monitor_expect (current_monitor->getmem.resp_delim, NULL, 0);
+
+/* Now, read the appropriate number of hex digits for this loc, skipping
+ spaces. */
+
+ for (i = 0; i < len * 2; i++)
+ {
+ int c;
+
+ while (1)
+ {
+ c = readchar (timeout);
+ if (isxdigit (c))
+ break;
+ if (c == ' ')
+ continue;
+
+ error ("monitor_read_memory_single (0x%x): bad response from monitor: %.*s%c.",
+ memaddr, i, membuf, c);
+ }
+
+ membuf[i] = c;
+ }
+
+ membuf[i] = '\000'; /* terminate the number */
+
+/* If TERM is present, we wait for that to show up. Also, (if TERM is
+ present), we will send TERM_CMD if that is present. In any case, we collect
+ all of the output into buf, and then wait for the normal prompt. */
+
+ if (current_monitor->getmem.term)
+ {
+ monitor_expect (current_monitor->getmem.term, NULL, 0); /* get response */
+
+ if (current_monitor->getmem.term_cmd)
+ {
+ monitor_printf (current_monitor->getmem.term_cmd);
+ monitor_expect_prompt (NULL, 0);
+ }
+ }
+ else
+ monitor_expect_prompt (NULL, 0); /* get response */
+
+ p = membuf;
+ val = strtoul (membuf, &p, 16);
+
+ if (val == 0 && membuf == p)
+ error ("monitor_read_memory_single (0x%x): bad value from monitor: %s.",
+ memaddr, membuf);
+
+ /* supply register stores in target byte order, so swap here */
+
+ store_unsigned_integer (myaddr, len, val);
+
+ return len;
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR to inferior's memory
+ at MEMADDR. Returns length moved. Currently, we only do one byte at a
+ time. */
+
+static int
+monitor_read_memory (memaddr, myaddr, len)
+ CORE_ADDR memaddr;
+ char *myaddr;
+ int len;
+{
+ unsigned LONGEST val;
+ unsigned char regbuf[MAX_REGISTER_RAW_SIZE];
+ char buf[512];
+ char *p, *p1;
+ char *name;
+ int resp_len;
+ int i;
+
+ if (current_monitor->flags & MO_GETMEM_READ_SINGLE)
+ return monitor_read_memory_single (memaddr, myaddr, len);
- /* supply register stores in target byte order, so swap here */
- SWAP_TARGET_AND_HOST (&val, 4);
- supply_register (regno, (char *) &val);
-
- if (*ROMDELIM(GET_REG) != 0) {
-/*** expect (ROMRES(GET_REG)); ***/
- printf_monitor (CMD_END);
- }
- expect_prompt (1);
- }
- return;
-}
+ len = min (len, 16);
-/* Store the remote registers from the contents of the block REGS. */
+/* See if xfer would cross a 16 byte boundary. If so, clip it. */
+ if (((memaddr ^ (memaddr + len - 1)) & ~0xf) != 0)
+ len = ((memaddr + len) & ~0xf) - memaddr;
-void
-monitor_store_registers ()
-{
- int regno;
+ /* send the memory examine command */
- debuglogs (1, "monitor_store_registers()");
+ if (current_monitor->flags & MO_GETMEM_NEEDS_RANGE)
+ monitor_printf (current_monitor->getmem.cmdb, memaddr, memaddr + len - 1);
+ else
+ monitor_printf (current_monitor->getmem.cmdb, memaddr, len);
- for (regno = 0; regno <= PC_REGNUM; regno++)
- monitor_store_register(regno);
+/* If TERM is present, we wait for that to show up. Also, (if TERM is
+ present), we will send TERM_CMD if that is present. In any case, we collect
+ all of the output into buf, and then wait for the normal prompt. */
- registers_changed ();
-}
+ if (current_monitor->getmem.term)
+ {
+ resp_len = monitor_expect (current_monitor->getmem.term, buf, sizeof buf); /* get response */
-/*
- * monitor_store_register -- store register REGNO, or all if REGNO == 0.
- * return errno value.
- */
-void
-monitor_store_register (regno)
- int regno;
-{
- char *name;
- int i;
+ if (resp_len <= 0)
+ error ("monitor_read_memory (0x%x): excessive response from monitor: %.*s.",
+ memaddr, resp_len, buf);
+
+ if (current_monitor->getmem.term_cmd)
+ {
+ SERIAL_WRITE (monitor_desc, current_monitor->getmem.term_cmd,
+ strlen (current_monitor->getmem.term_cmd));
+ monitor_expect_prompt (NULL, 0);
+ }
+ }
+ else
+ resp_len = monitor_expect_prompt (buf, sizeof buf); /* get response */
- i = read_register(regno);
+ p = buf;
- debuglogs (1, "monitor_store_register (regno=%d)", regno);
+ /* If RESP_DELIM is specified, we search for that as a leading delimiter for
+ the values. Otherwise, we just start searching from the start of the buf.
+ */
- if (regno < 0)
- monitor_store_registers ();
- else {
- debuglogs (3, "Setting register %s to 0x%x", get_reg_name (regno), read_register (regno));
-
- name = get_reg_name (regno);
- if (STREQ(name, ""))
- return;
- printf_monitor (ROMCMD(SET_REG), name, read_register(regno));
- expect (name, 1); /* strip the leading garbage */
- if (*ROMDELIM(SET_REG) != 0) { /* if there's a delimiter */
- expect (ROMDELIM(SET_REG), 1);
- get_hex_word(1);
- printf_monitor ("%d%s\n", i, CMD_END);
- }
- expect_prompt (1);
- }
- return;
-
-#if 0
- printf_monitor (SET_REG, get_reg_name (regno),
- read_register (regno));
- expect_prompt (1);
+ if (current_monitor->getmem.resp_delim)
+ {
+ p = strstr (p, current_monitor->getmem.resp_delim);
+ if (!p)
+ error ("monitor_read_memory (0x%x): bad response from monitor: %.*s.",
+ memaddr, resp_len, buf);
+ p += strlen (current_monitor->getmem.resp_delim);
}
-#endif
-}
-/* Get ready to modify the registers array. On machines which store
- individual registers, this doesn't need to do anything. On machines
- which store all the registers in one fell swoop, this makes sure
- that registers contains all the registers from the program being
- debugged. */
+ for (i = len; i > 0; i--)
+ {
+ /* Skip non-hex chars, but bomb on end of string and newlines */
+
+ while (1)
+ {
+ if (isxdigit (*p))
+ break;
+ if (*p == '\000' || *p == '\n' || *p == '\r')
+ error ("monitor_read_memory (0x%x): badly terminated response from monitor: %.*s", memaddr, resp_len, buf);
+ p++;
+ }
-void
-monitor_prepare_to_store ()
-{
- /* Do nothing, since we can store individual regs */
-}
+ val = strtoul (p, &p1, 16);
-void
-monitor_files_info ()
-{
- printf ("\tAttached to %s at %d baud.\n",
- dev_name, baudrate);
-}
+ if (val == 0 && p == p1)
+ error ("monitor_read_memory (0x%x): bad value from monitor: %.*s.", memaddr,
+ resp_len, buf);
-/*
- * monitor_write_inferior_memory -- Copy LEN bytes of data from debugger
- * memory at MYADDR to inferior's memory at MEMADDR. Returns length moved.
- */
-int
-monitor_write_inferior_memory (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- unsigned char *myaddr;
- int len;
-{
- int i;
- char buf[10];
+ *myaddr++ = val;
- debuglogs (1, "monitor_write_inferior_memory (memaddr=0x%x, myaddr=0x%x, len=%d)", memaddr, myaddr, len);
+ if (i == 1)
+ break;
- for (i = 0; i < len; i++) {
- printf_monitor (ROMCMD(SET_MEM), memaddr + i, myaddr[i] );
- if (*ROMDELIM(SET_MEM) != 0) { /* if there's a delimiter */
- expect (ROMDELIM(SET_MEM), 1);
- expect (CMD_DELIM);
- printf_monitor ("%x", myaddr[i]);
- }
-/*** printf_monitor ("%x", myaddr[i]); ***/
- if (sr_get_debug() > 1)
- printf ("\nSet 0x%x to 0x%x\n", memaddr + i, myaddr[i]);
- if (*ROMDELIM(SET_MEM) != 0) {
- expect (CMD_DELIM);
- printf_monitor (CMD_END);
+ p = p1;
}
- expect_prompt (1);
- }
- return len;
-}
-/*
- * monitor_read_inferior_memory -- read LEN bytes from inferior memory
- * at MEMADDR. Put the result at debugger address MYADDR. Returns
- * length moved.
- */
-int
-monitor_read_inferior_memory(memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
-{
- int i, j;
- char buf[20];
-
- /* Number of bytes read so far. */
- int count;
-
- /* Starting address of this pass. */
- unsigned long startaddr;
-
- /* Starting address of this pass. */
- unsigned long endaddr;
-
- /* Number of bytes to read in this pass. */
- int len_this_pass;
-
- debuglogs (1, "monitor_read_inferior_memory (memaddr=0x%x, myaddr=0x%x, len=%d)", memaddr, myaddr, len);
-
- /* Note that this code works correctly if startaddr is just less
- than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
- thing). That is, something like
- monitor_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
- works--it never adds len To memaddr and gets 0. */
- /* However, something like
- monitor_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
- doesn't need to work. Detect it and give up if there's an attempt
- to do that. */
- if (((memaddr - 1) + len) < memaddr) {
- errno = EIO;
- return 0;
- }
-
- startaddr = memaddr;
- count = 0;
- while (count < len) {
- len_this_pass = 16;
- if ((startaddr % 16) != 0)
- len_this_pass -= startaddr % 16;
- if (len_this_pass > (len - count))
- len_this_pass = (len - count);
-
- debuglogs (3, "Display %d bytes at %x for Big Endian host", len_this_pass, startaddr);
-
- for (i = 0; i < len_this_pass; i++) {
- printf_monitor (ROMCMD(GET_MEM), startaddr, startaddr);
- sprintf (buf, ROMCMD(GET_MEM), startaddr, startaddr);
- if (*ROMDELIM(GET_MEM) != 0) { /* if there's a delimiter */
- expect (ROMDELIM(GET_MEM), 1);
- } else {
- sprintf (buf, ROMCMD(GET_MEM), startaddr, startaddr);
- expect (buf,1); /* get the command echo */
- get_hex_word(1); /* strip away the address */
- }
- get_hex_byte (&myaddr[count++]); /* get the value at this address */
-
- if (*ROMDELIM(GET_MEM) != 0) {
- printf_monitor (CMD_END);
- }
- expect_prompt (1);
- startaddr += 1;
- }
- }
return len;
}
-/* FIXME-someday! merge these two. */
-int
-monitor_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+static int
+monitor_xfer_memory (memaddr, myaddr, len, write, target)
CORE_ADDR memaddr;
char *myaddr;
int len;
int write;
struct target_ops *target; /* ignored */
{
- if (write)
- return monitor_write_inferior_memory (memaddr, myaddr, len);
- else
- return monitor_read_inferior_memory (memaddr, myaddr, len);
+ return dcache_xfer_memory (remote_dcache, memaddr, myaddr, len, write);
}
-void
-monitor_kill (args, from_tty)
- char *args;
- int from_tty;
+static void
+monitor_kill ()
{
return; /* ignore attempts to kill target system */
}
+/* All we actually do is set the PC to the start address of exec_bfd, and start
+ the program at that point. */
+
+static void
+monitor_create_inferior (exec_file, args, env)
+ char *exec_file;
+ char *args;
+ char **env;
+{
+ if (args && (*args != '\000'))
+ error ("Args are not supported by the monitor.");
+
+ clear_proceed_status ();
+ proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0);
+}
+
/* Clean up when a program exits.
The program actually lives on in the remote processor's RAM, and may be
run again without a download. Don't leave it full of breakpoint
instructions. */
-void
+static void
monitor_mourn_inferior ()
{
- remove_breakpoints ();
+ unpush_target (targ_ops);
generic_mourn_inferior (); /* Do all the proper things now */
}
-#define MAX_MONITOR_BREAKPOINTS 16
+#define NUM_MONITOR_BREAKPOINTS 8
-extern int memory_breakpoint_size;
-static CORE_ADDR breakaddr[MAX_MONITOR_BREAKPOINTS] = {0};
+static CORE_ADDR breakaddr[NUM_MONITOR_BREAKPOINTS] = {0};
-/*
- * monitor_insert_breakpoint -- add a breakpoint
- */
-int
+/* Tell the monitor to add a breakpoint. */
+
+static int
monitor_insert_breakpoint (addr, shadow)
CORE_ADDR addr;
char *shadow;
{
int i;
-
- debuglogs (1, "monitor_insert_breakpoint() addr = 0x%x", addr);
-
- for (i = 0; i <= MAX_MONITOR_BREAKPOINTS; i++) {
- if (breakaddr[i] == 0) {
- breakaddr[i] = addr;
- if (sr_get_debug() > 4)
- printf ("Breakpoint at %x\n", addr);
- monitor_read_inferior_memory(addr, shadow, memory_breakpoint_size);
- printf_monitor(SET_BREAK_CMD, addr);
- expect_prompt(1);
- return 0;
+ static unsigned char break_insn[] = BREAKPOINT;
+
+ for (i = 0; i < NUM_MONITOR_BREAKPOINTS; i++)
+ {
+ if (breakaddr[i] == 0)
+ {
+ breakaddr[i] = addr;
+ monitor_read_memory (addr, shadow, sizeof (break_insn));
+ monitor_printf (SET_BREAK_CMD, addr);
+ monitor_expect_prompt (NULL, 0);
+ return 0;
+ }
}
- }
- fprintf(stderr, "Too many breakpoints (> 16) for monitor\n");
- return 1;
+ error ("Too many breakpoints (> %d) for monitor.", NUM_MONITOR_BREAKPOINTS);
}
-/*
- * _remove_breakpoint -- Tell the monitor to remove a breakpoint
- */
-int
+/* Tell the monitor to remove a breakpoint. */
+
+static int
monitor_remove_breakpoint (addr, shadow)
CORE_ADDR addr;
char *shadow;
{
int i;
- debuglogs (1, "monitor_remove_breakpoint() addr = 0x%x", addr);
-
- for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++) {
- if (breakaddr[i] == addr) {
- breakaddr[i] = 0;
- /* some monitors remove breakpoints based on the address */
- if (CLR_BREAK_ADDR)
- printf_monitor(CLR_BREAK_CMD, addr);
- else
- printf_monitor(CLR_BREAK_CMD, i);
- expect_prompt(1);
- return 0;
+ for (i = 0; i < NUM_MONITOR_BREAKPOINTS; i++)
+ {
+ if (breakaddr[i] == addr)
+ {
+ breakaddr[i] = 0;
+ /* some monitors remove breakpoints based on the address */
+ if (current_monitor->flags & MO_CLR_BREAK_USES_ADDR)
+ monitor_printf (CLR_BREAK_CMD, addr);
+ else
+ monitor_printf (CLR_BREAK_CMD, i);
+ monitor_expect_prompt (NULL, 0);
+ return 0;
+ }
}
- }
- fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr);
+ fprintf_unfiltered (stderr, "Can't find breakpoint associated with 0x%x\n", addr);
return 1;
}
-/* monitor_load -- load a file. This file determines which of the
- * supported formats to use. The current types are:
- * FIXME: not all types supported yet.
- * default - reads any file using bfd and writes it to memory. This
- * is really slow.
- * srec - reads binary file using bfd and writes it as an
- * ascii srecord.
- * xmodem-bin - reads a binary file using bfd, and downloads it
- * using xmodem protocol.
- * xmodem-srec - reads a binary file using bfd, and after converting
- * it downloads it as an srecord using xmodem protocol.
- * ascii-srec - reads a ascii srecord file and downloads it
- * without a change.
- * ascii-xmodem - reads a ascii file and downloads using xmodem
- * protocol.
- */
-void
-monitor_load (file, fromtty)
+/* monitor_load -- download a file. */
+
+static void
+monitor_load (file, from_tty)
char *file;
- int fromtty;
+ int from_tty;
{
- FILE *download;
- int i, bytes_read;
-
- debuglogs (1, "Loading %s to monitor", file);
+ dcache_flush (remote_dcache);
- if (STREQ (loadtype_str, "default")) { /* default, load a binary */
- gr_load_image (file, fromtty); /* by writing it into memory */
- return;
- }
+ if (current_monitor->load_routine)
+ current_monitor->load_routine (monitor_desc, file, hashmark);
+ else
+ monitor_load_srec (file);
- /* load an srecord by converting */
- if ((STREQ (loadtype_str, "srec")) && STREQ (loadproto_str, "xmodem")) {
- monitor_load_srec(file, XMODEM);
- return;
- }
+/* Finally, make the PC point at the start address */
- if (STREQ (loadtype_str, "srec")) { /* load an srecord by converting */
- monitor_load_srec(file, 0); /* if from a binary */
- return;
- }
+ if (exec_bfd)
+ write_pc (bfd_get_start_address (exec_bfd));
- if (STREQ (loadtype_str, "none")) { /* load an srecord by converting */
- error ("Unimplemented");
- return;
- }
+ inferior_pid = 0; /* No process now */
- if (STREQ (loadproto_str, "none")) { /* load an srecord file */
- monitor_load_ascii_srec(file, fromtty); /* if from a binary */
- return;
- }
+/* This is necessary because many things were based on the PC at the time that
+ we attached to the monitor, which is no longer valid now that we have loaded
+ new code (and just changed the PC). Another way to do this might be to call
+ normal_stop, except that the stack may not be valid, and things would get
+ horribly confused... */
- if (STREQ (loadproto_str, "xmodem")) { /* load an srecord using the */
- monitor_load_srec(file, XMODEM);
- return;
- }
+ clear_symtab_users ();
}
-/*
- * monitor_load_ascii_srec -- download an ASCII srecord file.
- */
-#define DOWNLOAD_LINE_SIZE 100
-int
-monitor_load_ascii_srec (file, fromtty)
- char *file;
- int fromtty;
+static void
+monitor_stop ()
{
- FILE *download;
- char buf[DOWNLOAD_LINE_SIZE];
- int i, bytes_read;
-
- debuglogs (1, "Loading an ASCII srecord file, %s.", file);
-
- download = fopen (file, "r");
- if (download == NULL) {
- error ("%s Does not exist", file);
- return;
- }
-
- printf_monitor (LOAD_CMD);
- sleep(1);
- while (!feof (download)) {
- bytes_read = fread (buf, sizeof (char), DOWNLOAD_LINE_SIZE, download);
- if (hashmark) {
- putchar ('.');
- fflush (stdout);
- }
- if (SERIAL_WRITE(monitor_desc, buf, bytes_read)) {
- fprintf(stderr, "SERIAL_WRITE failed: (while downloading) %s\n", safe_strerror(errno));
- break;
- }
- i = 0;
- while (i++ <=200) {} ; /* Ugly HACK, probably needs flow control */
- if (bytes_read < DOWNLOAD_LINE_SIZE) {
- if (!feof (download))
- error ("Only read %d bytes\n", bytes_read);
- break;
- }
- }
-
- if (hashmark) {
- putchar ('\n');
- }
- if (!feof (download))
- error ("Never got EOF while downloading");
- expect_prompt(1);
- fclose (download);
+ if (current_monitor->stop)
+ monitor_printf_noecho (current_monitor->stop);
}
-/*
- * monitor_command -- put a command string, in args, out to MONITOR.
- * Output from MONITOR is placed on the users terminal until the
- * prompt is seen. FIXME: We read the charcters ourseleves here
- * cause of a nasty echo.
- */
-void
-monitor_command (args, fromtty)
- char *args;
- int fromtty;
-{
+/* Put a command string, in args, out to MONITOR. Output from MONITOR
+ is placed on the users terminal until the prompt is seen. FIXME: We
+ read the characters ourseleves here cause of a nasty echo. */
+static void
+monitor_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
char *p;
- char c, cp;
+ int resp_len;
+ char buf[1000];
+
+ if (monitor_desc == NULL)
+ error ("monitor target not open.");
+
p = PROMPT;
- debuglogs (1, "monitor_command (args=%s)", args);
+ /* Send the command. Note that if no args were supplied, then we're
+ just sending the monitor a newline, which is sometimes useful. */
- if (monitor_desc == NULL)
- error("monitor target not open.");
+ monitor_printf ("%s\r", (args ? args : ""));
- if (!args)
- error("Missing command.");
-
- printf_monitor ("%s\n", args);
+ resp_len = monitor_expect_prompt (buf, sizeof buf);
- expect_prompt(0);
+ fputs_unfiltered (buf, gdb_stdout); /* Output the response */
}
-/*
- * monitor_load_srec -- download a binary file by converting it to srecords. This
- * will also use xmodem to download the resulting file.
- *
- * A download goes like this when using xmodem:
- * Receiver: Sender
- * NAK ---------->
- * <-------- (packet) [SOH|1|1|data|SUM]
- * ACK ---------->
- * <-------- (packet) [SOH|2|2|data|SUM]
- * ACK ---------->
- * <-------- EOT
- * ACK ---------->
- *
- * ACK = 0x06
- * NAK = 0x15
- * EOT = 0x04
- *
- */
+/* Download a binary file by converting it to S records. */
+
static void
-monitor_load_srec (args, protocol)
+monitor_load_srec (args)
char *args;
- int protocol;
{
bfd *abfd;
asection *s;
- char buffer[1024];
- char srec[1024];
- char packet[XMODEM_PACKETSIZE];
+ char *buffer, srec[1024];
int i;
- int retries;
- int type = 0; /* default to a type 0, header record */
- int srec_frame = 57; /* FIXME: this must be 57 There is 12 bytes
- of header, and 2 bytes of checksum at the end.
- The problem is an xmodem packet holds exactly
- 128 bytes. */
+ int srec_frame = 32;
+ int reclen;
+
+ buffer = alloca (srec_frame * 2 + 256);
abfd = bfd_openr (args, 0);
- if (!abfd) {
- printf_filtered ("Unable to open file %s\n", args);
- return;
- }
+ if (!abfd)
+ {
+ printf_filtered ("Unable to open file %s\n", args);
+ return;
+ }
- if (bfd_check_format (abfd, bfd_object) == 0) {
- printf_filtered ("File is not an object file\n");
- return;
- }
-
- printf_monitor (LOAD_CMD); /* tell the monitor to load */
- if (protocol == XMODEM) { /* get the NAK from the target */
- if (GETNAK) {
- debuglogs (3, "Got the NAK to start loading");
- } else {
- printf_monitor ("%c", EOT);
- debuglogs (3, "Never got the NAK to start loading");
- error ("Never got the NAK to start loading");
+ if (bfd_check_format (abfd, bfd_object) == 0)
+ {
+ printf_filtered ("File is not an object file\n");
+ return;
}
- }
- s = abfd->sections;
- while (s != (asection *) NULL) {
- if (s->flags & SEC_LOAD) {
- char *buffer = xmalloc (srec_frame);
- printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, s->vma, s->vma + s->_raw_size);
- fflush (stdout);
- for (i = 0; i < s->_raw_size; i += srec_frame) {
- if (srec_frame > s->_raw_size - i)
- srec_frame = s->_raw_size - i;
-
- bfd_get_section_contents (abfd, s, buffer, i, srec_frame);
- monitor_make_srec (srec, type, s->vma + i, buffer, srec_frame);
- if (protocol == XMODEM) { /* send a packet using xmodem */
- make_xmodem_packet (packet, srec, XMODEM_DATASIZE);
- write_monitor (packet, XMODEM_PACKETSIZE+1);
- retries = 0;
- while (retries++ <= 3) {
- if (GETNAK) { /* Resend packet */
- debuglogs (3, "Got a NAK, resending packet");
- sleep(1);
- write_monitor (packet, XMODEM_PACKETSIZE+1); /* send it again */
- if (GETACK) /* ACKnowledged, get next data chunk */
- break;
- } else { /* assume we got an ACK */
+ monitor_printf (LOAD_CMD); /* tell the monitor to load */
+ if (current_monitor->loadresp)
+ monitor_expect (current_monitor->loadresp, NULL, 0);
+
+ for (s = abfd->sections; s; s = s->next)
+ {
+ if (s->flags & SEC_LOAD)
+ {
+ int numbytes;
+
+ printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, s->vma,
+ s->vma + s->_raw_size);
+ gdb_flush (gdb_stdout);
+
+ for (i = 0; i < s->_raw_size; i += numbytes)
+ {
+ numbytes = min (srec_frame, s->_raw_size - i);
+
+ bfd_get_section_contents (abfd, s, buffer, i, numbytes);
+
+ reclen = monitor_make_srec (srec, 'd', s->vma + i, buffer, numbytes);
+
+ monitor_printf_noecho ("%.*s\r", reclen, srec);
+
if (hashmark)
- printf_filtered ("#");
- debuglogs (3, "Got an ACK, sending next packet");
- break;
- }
- }
- if (retries >= 4) { /* too many tries, must be hosed */
- printf_monitor ("%c", EOT);
- error ("Never got a ACK after sending an xmodem packet");
- }
- } else { /* no protocols at all */
- printf_monitor ("%s\n", srec);
- }
- if (hashmark)
- printf_filtered ("#");
- type = 3; /* switch to a 4 byte address record */
- fflush (stdout);
- }
- free (buffer);
- } else {
- debuglogs (3, "%s doesn't need to be loaded", s->name);
+ {
+ putchar_unfiltered ('#');
+ gdb_flush (gdb_stdout);
+ }
+ } /* Per-packet (or S-record) loop */
+
+ putchar_unfiltered ('\n');
+ } /* Loadable sections */
}
- s = s->next;
- }
- printf_filtered ("\n");
-
- /*
- write a type 7 terminator record. no data for a type 7,
- and there is no data, so len is 0.
- */
- if (protocol == XMODEM) { /* send a packet using xmodem */
- monitor_make_srec (srec, 7, abfd->start_address, "", 0);
- make_xmodem_packet (packet, srec, XMODEM_DATASIZE);
- write_monitor (packet, XMODEM_PACKETSIZE+1);
- } else {
- monitor_make_srec (srec, 7, abfd->start_address, "", 0);
- printf_monitor ("%s\n", srec);
- }
- if (protocol == XMODEM) {
- printf_monitor ("%c", EOT);
- if (!GETACK)
- error ("Never got ACK after sending EOT");
- }
-
if (hashmark)
- putchar ('\n');
+ putchar_unfiltered ('\n');
- expect_prompt ();
-}
+ /* Write a type 7 terminator record. no data for a type 7, and there
+ is no data, so len is 0. */
-/*
- * getacknak -- get an ACK or a NAK from the target.
- * returns 1 (true) or 0 (false) This is
- * for xmodem. ANy string starting with "***"
- * is an error message from the target.
- * Here's a few from the WinBond w89k "Cougar" PA board.
- * *** Too many errors found.
- * *** Bad command
- * *** Command syntax error
- */
-int
-getacknak (byte)
- int byte;
-{
- char character;
- int i;
-
- i = 0;
- while (i++ < 60) {
- character = (char)readchar (0);
- if ((character == 0xfffffffe) || (character == 0x7f)) { /* empty uart */
- if (sr_get_debug() > 3)
- putchar ('.');
- fflush (stdout);
- sleep (1);
- continue;
- }
- if (character == CANCEL) { /* target aborted load */
- expect_prompt (0);
- error ("Got a CANCEL from the target.");
- }
- if (character == '*') { /* look for missed error message */
- expect_prompt (0);
- error ("Got an error message from the target");
- }
- debuglogs (3, "Got a %s (0x%x or \'%c\'), expecting a %s.\n",
- (character == ACK) ? "ACK" : (character == NAK) ? "NAK" : "BOGUS",
- character, character, (byte == ACK) ? "ACK" : "NAK");
- if (character == byte) /* got what we wanted */
- return 1;
- if (character == ((byte == ACK) ? NAK : ACK)) { /* got the opposite */
- debuglogs (3, "Got the opposite, wanted 0x%x, got a 0x%x", byte, character);
- return 0;
- }
- sleep (1);
- }
- return 0;
+ reclen = monitor_make_srec (srec, 't', abfd->start_address, NULL, 0);
+
+ monitor_printf_noecho ("%.*s\r", reclen, srec);
+
+ monitor_printf_noecho ("\r\r"); /* Some monitors need these to wake up */
+
+ monitor_expect_prompt (NULL, 0);
+
+ SERIAL_FLUSH_INPUT (monitor_desc);
}
/*
* - checksum
* is the sum of all the raw byte data in the record, from the length
* upwards, modulo 256 and subtracted from 255.
+ *
+ * This routine returns the length of the S-record.
+ *
*/
-int
+
+static int
monitor_make_srec (buffer, type, memaddr, myaddr, len)
char *buffer;
int type;
unsigned char *myaddr;
int len;
{
- int checksum;
+ unsigned char checksum;
int i;
char *buf;
-
+ static char hextab[16] = "0123456789ABCDEF";
+ static char data_code_table[] = { 0,0,1,2,3};
+ static char term_code_table[] = { 0,0,9,8,7};
+ int addr_size; /* Number of bytes in the record */
+ int type_code;
buf = buffer;
- debuglogs (4, "monitor_make_srec (buffer=0x%x, type=%d, memaddr=0x%x, len=%d",
- buffer, type, memaddr, len);
+
checksum = 0;
- /*
- create the header for the srec. 4 is the number of bytes in the address,
- and 1 is the number of bytes in the count.
- */
- if (type == 0) /* FIXME: type 0 is optional */
- type = 3; /* so use data as it works */
- sprintf (buf, "S%d%02X%08X", type, len + 4 + 1, memaddr);
- buf += 12;
-
- checksum += (len + 4 + 1 /* calculate the checksum */
- + (memaddr & 0xff)
+ addr_size = 2;
+ if (memaddr >= 0xffffff)
+ addr_size = 4;
+ else if (memaddr >= 0xffffff)
+ addr_size = 3;
+ else
+ addr_size = 2;
+
+ switch (type)
+ {
+ case 't':
+ type_code = term_code_table[addr_size];
+ break;
+ case 'd':
+ type_code = data_code_table[addr_size];
+ break;
+ default:
+ abort();
+ }
+ /* Create the header for the srec. addr_size is the number of bytes in the address,
+ and 1 is the number of bytes in the count. */
+
+ switch (addr_size)
+ {
+ case 4:
+ sprintf (buf, "S%d%02X%08X", type_code, len + addr_size + 1, memaddr);
+ buf += 12;
+ break;
+ case 3:
+ sprintf (buf, "S%d%02X%06X", type_code, len + addr_size + 1, memaddr);
+ buf += 10;
+ break;
+ case 2:
+ sprintf (buf, "S%d%02X%04X", type_code, len + addr_size + 1, memaddr);
+ buf += 8;
+ break;
+ }
+
+/* Note that the checksum is calculated on the raw data, not the hexified
+ data. It includes the length, address and the data portions of the
+ packet. */
+
+ checksum += (len + addr_size + 1 /* Packet length */
+ + (memaddr & 0xff) /* Address... */
+ ((memaddr >> 8) & 0xff)
+ ((memaddr >> 16) & 0xff)
+ ((memaddr >> 24) & 0xff));
- for (i = 0; i < len; i++) { /* build the srecord */
- sprintf (buf, "%02X", myaddr[i]);
- checksum += myaddr[i];
- buf += 2;
- }
+ /* build the srecord */
+ for (i = 0; i < len; i++)
+ {
+ *buf++ = hextab [myaddr[i] >> 4];
+ *buf++ = hextab [myaddr[i] & 0xf];
+ checksum += myaddr[i];
+ }
- sprintf(buf, "%02X", ~checksum & 0xff); /* add the checksum */
- debuglogs (3, "srec is \"%s\"", buffer);
-
- return(0);
-}
+ checksum = ~checksum;
-/*
- * make_xmodem_packet -- this takes a 128 bytes of data and makes a packet
- * out of it.
- *
- * Each packet looks like this:
- * +-----+-------+-------+------+-----+
- * | SOH | Seq1. | Seq2. | data | SUM |
- * +-----+-------+-------+------+-----+
- * SOH = 0x01
- * Seq1 = The sequence number.
- * Seq2 = The complement of the sequence number.
- * Data = A 128 bytes of data.
- * SUM = Add the contents of the 128 bytes and use the low-order
- * 8 bits of the result.
- */
-void
-make_xmodem_packet (packet, data, len)
- unsigned char packet[];
- unsigned char *data;
- int len;
-{
- static int sequence = 1;
- int i, sum;
- unsigned char *buf;
-
- buf = data;
- /* build the packet header */
- packet[0] = SOH;
- packet[1] = sequence;
- packet[2] = 255 - sequence;
- sequence++;
-#if 0
- packet[2] = ~sequence++; /* the complement is the sequence checksum */
-#endif
-
- sum = 0; /* calculate the data checksum */
- for (i = 3; i <= len + 2; i++) {
- packet[i] = *buf;
- sum += *buf;
- buf++;
- }
+ *buf++ = hextab[checksum >> 4];
+ *buf++ = hextab[checksum & 0xf];
- for (i = len+1 ; i <= XMODEM_DATASIZE ; i++) { /* add padding for the rest of the packet */
- packet[i] = '0';
- }
+ return buf - buffer;
+}
- packet[XMODEM_PACKETSIZE] = sum & 0xff; /* add the checksum */
+/* Convert hex digit A to a number. */
- if (sr_get_debug() > 4) {
- debuglogs (4, "The xmodem checksum is %d (0x%x)\n", sum & 0xff, sum & 0xff);
- print_xmodem_packet (packet);
- }
+static int
+from_hex (a)
+ int a;
+{
+ if (a >= '0' && a <= '9')
+ return a - '0';
+ if (a >= 'a' && a <= 'f')
+ return a - 'a' + 10;
+ if (a >= 'A' && a <= 'F')
+ return a - 'A' + 10;
+
+ error ("Reply contains invalid hex digit 0x%x", a);
}
-/*
- * print_xmodem_packet -- print the packet as a debug check
- */
-void
-print_xmodem_packet(packet)
- char packet[];
+static struct target_ops monitor_ops =
{
- int i;
- static int lastseq;
- int sum;
-
- /* take apart the packet header the packet header */
- if (packet[0] == SOH) {
- ("SOH");
- } else {
- error ("xmodem: SOH is wrong");
- }
-
- /* check the sequence */
- if (packet[1] != 0) {
- lastseq = packet[1];
- if (packet[2] != ~lastseq)
- error ("xmodem: Sequence checksum is wrong");
- else
- printf_filtered (" %d %d", lastseq, ~lastseq);
- }
-
- /* check the data checksum */
- sum = 0;
- for (i = 3; i <= XMODEM_DATASIZE; i++) {
- sum += packet[i];
- }
-
- /* ignore the data */
-#if 0
- printf (" [128 bytes of data] %d\n", sum & 0xff);
-#endif
- printf_filtered (" [%s] %d\n", packet, sum & 0xff);
+ NULL, /* to_shortname */
+ NULL, /* to_longname */
+ NULL, /* to_doc */
+ NULL, /* to_open */
+ monitor_close, /* to_close */
+ NULL, /* to_attach */
+ monitor_detach, /* to_detach */
+ monitor_resume, /* to_resume */
+ monitor_wait, /* to_wait */
+ monitor_fetch_registers, /* to_fetch_registers */
+ monitor_store_registers, /* to_store_registers */
+ monitor_prepare_to_store, /* to_prepare_to_store */
+ monitor_xfer_memory, /* to_xfer_memory */
+ monitor_files_info, /* to_files_info */
+ monitor_insert_breakpoint, /* to_insert_breakpoint */
+ monitor_remove_breakpoint, /* to_remove_breakpoint */
+ 0, /* to_terminal_init */
+ 0, /* to_terminal_inferior */
+ 0, /* to_terminal_ours_for_output */
+ 0, /* to_terminal_ours */
+ 0, /* to_terminal_info */
+ monitor_kill, /* to_kill */
+ monitor_load, /* to_load */
+ 0, /* to_lookup_symbol */
+ monitor_create_inferior, /* to_create_inferior */
+ monitor_mourn_inferior, /* to_mourn_inferior */
+ 0, /* to_can_run */
+ 0, /* to_notice_signals */
+ monitor_stop, /* to_stop */
+ process_stratum, /* to_stratum */
+ 0, /* to_next */
+ 1, /* to_has_all_memory */
+ 1, /* to_has_memory */
+ 1, /* to_has_stack */
+ 1, /* to_has_registers */
+ 1, /* to_has_execution */
+ 0, /* sections */
+ 0, /* sections_end */
+ OPS_MAGIC /* to_magic */
+};
+
+/* Init the target_ops structure pointed at by OPS */
- if ((packet[XMODEM_PACKETSIZE] & 0xff) != (sum & 0xff)) {
- debuglogs (4, "xmodem: data checksum wrong, got a %d", packet[XMODEM_PACKETSIZE] & 0xff);
- }
- putchar ('\n');
+void
+init_monitor_ops (ops)
+ struct target_ops *ops;
+{
+ memcpy (ops, &monitor_ops, sizeof monitor_ops);
}
-/*
- * _initialize_remote_monitors -- setup a few addtitional commands that
- * are usually only used by monitors.
- */
+/* Define additional commands that are usually only used by monitors. */
+
void
_initialize_remote_monitors ()
{
- struct cmd_list_element *c;
-
- /* this sets the type of download protocol */
- c = add_set_cmd ("remoteloadprotocol", no_class, var_string, (char *)&loadproto_str,
- "Set the type of the remote load protocol.\n", &setlist);
- c->function.sfunc = set_loadproto_command;
- add_show_from_set (c, &showlist);
- loadproto_str = savestring ("none", 5);
-
- /* this sets the conversion type when loading */
- c = add_set_cmd ("remoteloadtype", no_class, var_string, (char *)&loadtype_str,
- "Set the type of the remote load protocol.\n", &setlist);
- c->function.sfunc = set_loadtype_command;
- add_show_from_set (c, &showlist);
- loadtype_str = savestring ("srec", 5);
-
add_show_from_set (add_set_cmd ("hash", no_class, var_boolean,
(char *)&hashmark,
"Set display of activity while downloading a file.\n\
-When enabled, a period \'.\' is displayed.",
+When enabled, a hashmark \'#\' is displayed.",
&setlist),
&showlist);
- /* generic monitor command */
add_com ("monitor", class_obscure, monitor_command,
"Send a command to the debug monitor.");
}