#include "gdbcore.h"
#include "target.h"
#include "wait.h"
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
#include <varargs.h>
+#endif
#include <signal.h>
#include <string.h>
#include <sys/types.h>
#include "command.h"
#include "serial.h"
#include "monitor.h"
-#include "remote-utils.h"
-
-#if !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && !defined (HAVE_SGTTY)
-#define HAVE_SGTTY
-#endif
+#include "gdbcmd.h"
+#include "inferior.h"
+#include "regex.h"
+#include "dcache.h"
-#ifdef HAVE_TERMIOS
-#include <termio.h>
-#include <termios.h>
-# define TERMINAL struct termios
-#else
-#include <fcntl.h>
-# define TERMINAL struct sgttyb
-#endif
-#include "terminal.h"
-#ifndef CSTOPB
-#define CSTOPB 0x00000040
-#endif
+static int readchar PARAMS ((int timeout));
-static const char hexchars[] = "0123456789abcdef";
-static char *hex2mem ();
-
-#define SWAP_TARGET_AND_HOST(buffer,len) \
- do \
- { \
- if (TARGET_BYTE_ORDER != HOST_BYTE_ORDER) \
- { \
- char tmp; \
- char *p = (char *)(buffer); \
- char *q = ((char *)(buffer)) + len - 1; \
- for (; p < q; p++, q--) \
- { \
- tmp = *q; \
- *q = *p; \
- *p = tmp; \
- } \
- } \
- } \
- while (0)
-
-static void make_xmodem_packet ();
-static void print_xmodem_packet ();
-static void make_gdb_packet ();
-
-static void monitor_load_ascii_srec PARAMS ((char *file, int fromtty));
+static void monitor_command PARAMS ((char *args, int fromtty));
+static void monitor_load_srec PARAMS ((char *args));
static int monitor_make_srec PARAMS ((char *buffer, int type,
CORE_ADDR memaddr,
unsigned char *myaddr, int len));
-static unsigned long ascii2hexword ();
-static char *hexword2ascii ();
-static int tohex ();
-static int to_hex ();
-static int from_hex ();
+static void monitor_fetch_register PARAMS ((int regno));
+static void monitor_store_register PARAMS ((int regno));
-struct monitor_ops *current_monitor;
+static void monitor_close PARAMS ((int quitting));
+static void monitor_detach PARAMS ((char *args, int from_tty));
+static void monitor_resume PARAMS ((int pid, int step, enum target_signal sig));
+static void monitor_interrupt PARAMS ((int signo));
+static void monitor_interrupt_twice PARAMS ((int signo));
+static void monitor_interrupt_query PARAMS ((void));
+static void monitor_wait_cleanup PARAMS ((int old_timeout));
-extern struct cmd_list_element *setlist;
-extern struct cmd_list_element *unsetlist;
+static int monitor_wait PARAMS ((int pid, struct target_waitstatus *status));
+static void monitor_fetch_registers PARAMS ((int regno));
+static void monitor_store_registers PARAMS ((int regno));
+static void monitor_prepare_to_store PARAMS ((void));
+static int monitor_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len, int write, struct target_ops *target));
+static void monitor_files_info PARAMS ((struct target_ops *ops));
+static int monitor_insert_breakpoint PARAMS ((CORE_ADDR addr, char *shadow));
+static int monitor_remove_breakpoint PARAMS ((CORE_ADDR addr, char *shadow));
+static void monitor_kill PARAMS ((void));
+static void monitor_load PARAMS ((char *file, int from_tty));
+static void monitor_mourn_inferior PARAMS ((void));
+static void monitor_stop PARAMS ((void));
-struct cmd_list_element *showlist;
+static int monitor_read_memory PARAMS ((CORE_ADDR addr, char *myaddr,int len));
+static int monitor_write_memory PARAMS ((CORE_ADDR addr, char *myaddr,int len));
-extern char *version;
-extern char *host_name;
-extern char *target_name;
+static int from_hex PARAMS ((int a));
+static unsigned long get_hex_word PARAMS ((void));
-static int hashmark; /* flag set by "set hash" */
+static struct monitor_ops *current_monitor;
-#define LOG_FILE "monitor.log"
-#if defined (LOG_FILE)
-FILE *log_file;
-#endif
+static int hashmark; /* flag set by "set hash" */
static int timeout = 30;
-/* Having this larger than 400 causes us to be incompatible with m68k-stub.c
- and i386-stub.c. Normally, no one would notice because it only matters
- for writing large chunks of memory (e.g. in downloads). Also, this needs
- to be more than 400 if required to hold the registers (see below, where
- we round it up based on REGISTER_BYTES). */
+static int in_monitor_wait = 0; /* Non-zero means we are in monitor_wait() */
-#define PBUFSIZ 400
+static void (*ofunc)(); /* Old SIGINT signal handler */
/* Descriptor for I/O to remote machine. Initialize it to NULL so
that monitor_open knows that we don't have a file open when the
program starts. */
-serial_t monitor_desc = NULL;
+static serial_t monitor_desc = NULL;
-/* sets the download protocol, choices are srec, generic, boot */
-char *loadtype;
+/* Pointer to regexp pattern matching data */
-static char *loadtype_str;
-static char *loadproto_str;
-static void set_loadtype_command();
-static void set_loadproto_command();
-static void monitor_load_srec();
+static struct re_pattern_buffer register_pattern;
-/* These definitions are for xmodem protocol. */
+/* Element 0 points to start of register name, and element 1 points to the
+ start of the register value. */
-#define SOH 0x01
-#define ACK 0x06
-#define NAK 0x15
-#define EOT 0x04
-#define CANCEL 0x18
-#define GETACK getacknak(ACK)
-#define GETNAK getacknak(NAK)
-#define XMODEM_DATASIZE 128 /* the data size is ALWAYS 128 */
-#define XMODEM_PACKETSIZE 131 /* the packet size is ALWAYS 132 (zero based) */
-#define XMODEM 1
-
-/*
- * set_loadtype_command -- set the type for downloading. Check to make
- * sure you have a support protocol for this target.
- */
-static void
-set_loadtype_command (ignore, from_tty, c)
- char *ignore;
- int from_tty;
- struct cmd_list_element *c;
-{
- char *tmp;
- char *type;
-
- if (current_monitor == 0x0)
- return;
+static struct re_registers register_strings;
- if (STREQ (LOADTYPES, "")) {
- error ("No loadtype set");
- return;
- }
-
- tmp = savestring (LOADTYPES, strlen(LOADTYPES));
- type = strtok(tmp, ",");
- if (STREQ (type, (*(char **) c->var))) {
- loadtype_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
- return;
- }
-
- while ((type = strtok (NULL, ",")) != (char *)NULL) {
- if (STREQ (type, (*(char **) c->var)))
- loadtype_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
- return;
- }
- free (tmp);
- error ("Loadtype \"%s\" does not exist.", (*(char **) c->var));
-}
-/*
- * set_loadproto_command -- set the protocol for downloading. Check to make
- * sure you have a supported protocol for this target.
- */
-static void
-set_loadproto_command (ignore, from_tty, c)
- char *ignore;
- int from_tty;
- struct cmd_list_element *c;
-{
- char *tmp;
- char *type;
+static char fastmap[256];
- if (current_monitor == 0x0)
- return;
+static int dump_reg_flag; /* Non-zero means do a dump_registers cmd when
+ monitor_wait wakes up. */
- if (STREQ (LOADPROTOS, "")) {
- error ("No load protocols set");
- return;
- }
-
- tmp = savestring (LOADPROTOS, strlen(LOADPROTOS));
- type = strtok(tmp, ",");
- if (STREQ (type, (*(char **) c->var))) {
- loadproto_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
- return;
- }
-
- while ((type = strtok (NULL, ",")) != (char *)NULL) {
- if (STREQ (type, (*(char **) c->var)))
- loadproto_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
- return;
- }
- free (tmp);
- error ("Load protocol \"%s\" does not exist.", (*(char **) c->var));
-}
+static DCACHE *remote_dcache;
-/* printf_monitor -- send data to monitor. Works just like printf. */
+/* monitor_printf_noecho -- Send data to monitor, but don't expect an echo.
+ Works just like printf. */
-static void
-printf_monitor (va_alist)
+void
+#ifdef ANSI_PROTOTYPES
+monitor_printf_noecho (char *pattern, ...)
+#else
+monitor_printf_noecho (va_alist)
va_dcl
+#endif
{
va_list args;
- char *pattern;
- char buf[PBUFSIZ];
+ char sndbuf[2000];
+ int len;
+#if ANSI_PROTOTYPES
+ va_start (args, pattern);
+#else
+ char *pattern;
va_start (args);
-
pattern = va_arg (args, char *);
+#endif
- vsprintf (buf, pattern, args);
+ vsprintf (sndbuf, pattern, args);
- debuglogs (1, "printf_monitor(), Sending: \"%s\".", buf);
+ if (remote_debug > 0)
+ fputs_unfiltered (sndbuf, gdb_stderr);
- if (strlen (buf) > PBUFSIZ)
- error ("printf_monitor(): string too long");
- if (SERIAL_WRITE(monitor_desc, buf, strlen (buf)))
- fprintf (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
-}
+ len = strlen (sndbuf);
-/* Send raw data to monitor. */
+ if (len + 1 > sizeof sndbuf)
+ abort ();
-static void
-write_monitor (data, len)
- char *data;
- int len;
-{
- if (SERIAL_WRITE (monitor_desc, data, len))
- fprintf (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
-
- *(data + len + 1) = '\0';
- debuglogs (1, "write_monitor(), Sending: \"%s\".", data);
+ if (SERIAL_WRITE(monitor_desc, sndbuf, len))
+ fprintf_unfiltered (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
}
-/* Deal with debugging info to multiple sources. This takes two real
- args, the first one is the level to be compared against the
- sr_get_debug() value, the second arg is a printf buffer and args to
- be formatted and printed. A CR is added after each string is
- printed. */
+/* monitor_printf -- Send data to monitor and check the echo. Works just like
+ printf. */
void
-debuglogs (va_alist)
+#ifdef ANSI_PROTOTYPES
+monitor_printf (char *pattern, ...)
+#else
+monitor_printf (va_alist)
va_dcl
+#endif
{
va_list args;
- char *pattern, *p;
- unsigned char buf[PBUFSIZ];
- char newbuf[PBUFSIZ];
- int level, i;
+ char sndbuf[2000];
+ int len;
+ int i, c;
- va_start(args);
+#ifdef ANSI_PROTOTYPES
+ va_start (args, pattern);
+#else
+ char *pattern;
+ va_start (args);
+ pattern = va_arg (args, char *);
+#endif
- level = va_arg(args, int); /* get the debug level */
- if ((level < 0) || (level > 100))
- {
- error ("Bad argument passed to debuglogs(), needs debug level");
- return;
- }
-
- pattern = va_arg(args, char *); /* get the printf style pattern */
+ vsprintf (sndbuf, pattern, args);
- vsprintf(buf, pattern, args); /* format the string */
-
- /* convert some characters so it'll look right in the log */
- p = newbuf;
- for (i = 0 ; buf[i] != '\0'; i++)
- {
- if (i > PBUFSIZ)
- error ("Debug message too long");
- switch (buf[i])
- {
- case '\n': /* newlines */
- *p++ = '\\';
- *p++ = 'n';
- continue;
- case '\r': /* carriage returns */
- *p++ = '\\';
- *p++ = 'r';
- continue;
- case '\033': /* escape */
- *p++ = '\\';
- *p++ = 'e';
- continue;
- case '\t': /* tab */
- *p++ = '\\';
- *p++ = 't';
- continue;
- case '\b': /* backspace */
- *p++ = '\\';
- *p++ = 'b';
- continue;
- default: /* no change */
- *p++ = buf[i];
- }
+ if (remote_debug > 0)
+ fputs_unfiltered (sndbuf, gdb_stderr);
- /* modify control characters */
- if (buf[i] < 26)
- {
- *p++ = '^';
- *p++ = buf[i] + 'A';
- continue;
- }
+ len = strlen (sndbuf);
- /* modify control characters */
- if (buf[i] >= 128)
- {
- *p++ = '!';
- *p++ = buf[i] + 'A';
- continue;
- }
- }
- *p = '\0'; /* terminate the string */
+ if (len + 1 > sizeof sndbuf)
+ abort ();
- if (sr_get_debug () > level)
- printf_unfiltered ("%s\n", newbuf);
+ if (SERIAL_WRITE(monitor_desc, sndbuf, len))
+ fprintf_unfiltered (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
-#ifdef LOG_FILE /* write to the monitor log */
- if (log_file != 0x0)
+ for (i = 0; i < len; i++)
{
- fputs (newbuf, log_file);
- fputc ('\n', log_file);
- fflush (log_file);
- }
+ trycr:
+ c = readchar (timeout);
+
+ if (c != sndbuf[i])
+ {
+ /* Don't fail if we sent a ^C, they're never echoed */
+ if (sndbuf[i] == '\003')
+ continue;
+#if 0
+ if (sndbuf[i] == '\r'
+ && c == '\n')
+ goto trycr;
#endif
+ warning ("monitor_printf: Bad echo. Sent: \"%s\", Got: \"%.*s%c\".",
+ sndbuf, i, sndbuf, c);
+ }
+ }
}
/* Read a character from the remote system, doing all the fancy
c = SERIAL_READCHAR (monitor_desc, timeout);
- if (sr_get_debug () > 5)
- {
- putchar (c & 0x7f);
- debuglogs (5, "readchar: timeout = %d\n", timeout);
- }
-
-#ifdef LOG_FILE
- if (isascii (c))
- putc(c & 0x7f, log_file);
-#endif
+ if (remote_debug > 0)
+ fputc_unfiltered (c, gdb_stderr);
if (c >= 0)
return c & 0x7f;
if (c == SERIAL_TIMEOUT)
- {
- if (timeout == 0)
- return c; /* Polls shouldn't generate timeout errors */
- error ("Timeout reading from remote system.");
-#ifdef LOG_FILE
- fputs ("ERROR: Timeout reading from remote system", log_file);
+#ifdef MAINTENANCE_CMDS
+ if (in_monitor_wait) /* Watchdog went off */
+ {
+ target_mourn_inferior ();
+ error ("Watchdog has expired. Target detached.\n");
+ }
+ else
#endif
- }
+ error ("Timeout reading from remote system.");
+
perror_with_name ("remote-monitor");
}
-/* Scan input from the remote system, until STRING is found. If
- DISCARD is non-zero, then discard non-matching input, else print it
- out. Let the user break out immediately. */
+/* Scan input from the remote system, until STRING is found. If BUF is non-
+ zero, then collect input until we have collected either STRING or BUFLEN-1
+ chars. In either case we terminate BUF with a 0. If input overflows BUF
+ because STRING can't be found, return -1, else return number of chars in BUF
+ (minus the terminating NUL). Note that in the non-overflow case, STRING
+ will be at the end of BUF. */
-static void
-expect (string, discard)
+int
+monitor_expect (string, buf, buflen)
char *string;
- int discard;
+ char *buf;
+ int buflen;
{
char *p = string;
+ int obuflen = buflen;
int c;
- debuglogs (1, "Expecting \"%s\".", string);
-
immediate_quit = 1;
while (1)
{
- c = readchar (timeout);
- if (!isascii (c))
- continue;
- if (c == *p++)
+ if (buf)
{
- if (*p == '\0')
+ if (buflen < 2)
{
+ *buf = '\000';
immediate_quit = 0;
- debuglogs (4, "Matched");
- return;
+ return -1;
}
+
+ c = readchar (timeout);
+ *buf++ = c;
+ buflen--;
}
else
+ c = readchar (timeout);
+
+ if (c == *p++)
{
- if (!discard)
+ if (*p == '\0')
{
- putc_unfiltered (c);
-#if 0
- fwrite(string, 1, (p - 1) - string, stdout);
- putchar ((char)c);
- fflush (stdout);
-#endif
+ immediate_quit = 0;
+
+ if (buf)
+ {
+ *buf++ = '\000';
+ return obuflen - buflen;
+ }
+ else
+ return 0;
}
+ }
+ else
+ {
p = string;
+ if (c == *p)
+ p++;
}
}
}
o *then* wait for the prompt.
Thus the last thing that a procedure does with the serial line
- will be an expect_prompt(). Exception: monitor_resume does not
+ will be an monitor_expect_prompt(). Exception: monitor_resume does not
wait for the prompt, because the terminal is being handed over
to the inferior. However, the next thing which happens after that
is a monitor_wait which does wait for the prompt.
necessary to prevent getting into states from which we can't
recover. */
-static void
-expect_prompt (discard)
- int discard;
-{
- expect (PROMPT, discard);
-}
-
-/* Ignore junk characters. Returns a 1 if junk, 0 otherwise. */
-
-static int
-junk (ch)
- char ch;
-{
- switch (ch)
- {
- case '\0':
- case ' ':
- case '-':
- case '\t':
- case '\r':
- case '\n':
- if (sr_get_debug () > 5)
- debuglogs (5, "Ignoring \'%c\'.", ch);
- return 1;
- default:
- if (sr_get_debug () > 5)
- debuglogs (5, "Accepting \'%c\'.", ch);
- return 0;
- }
-}
-
-/* Get a hex digit from the remote system & return its value. If
- ignore is nonzero, ignore spaces, newline & tabs. */
-
-static int
-get_hex_digit (ignore)
- int ignore;
-{
- static int ch;
-
- while (1)
- {
- ch = readchar (timeout);
- if (junk (ch))
- continue;
- if (sr_get_debug () > 4)
- {
- debuglogs (4, "get_hex_digit() got a 0x%x(%c)", ch, ch);
- }
- else
- {
-#ifdef LOG_FILE /* write to the monitor log */
- if (log_file != 0x0)
- {
- fputs ("get_hex_digit() got a 0x", log_file);
- fputc (ch, log_file);
- fputc ('\n', log_file);
- fflush (log_file);
- }
-#endif
- }
-
- if (ch >= '0' && ch <= '9')
- return ch - '0';
- else if (ch >= 'A' && ch <= 'F')
- return ch - 'A' + 10;
- else if (ch >= 'a' && ch <= 'f')
- return ch - 'a' + 10;
- else if (ch == ' ' && ignore)
- ;
- else
- {
- expect_prompt (1);
- debuglogs (4, "Invalid hex digit from remote system. (0x%x)", ch);
- error ("Invalid hex digit from remote system. (0x%x)", ch);
- }
- }
-}
-
-/* Get a byte from monitor and put it in *BYT. Accept any number of
- leading spaces. */
-
-static void
-get_hex_byte (byt)
- char *byt;
+int
+monitor_expect_prompt (buf, buflen)
+ char *buf;
+ int buflen;
{
- int val;
-
- val = get_hex_digit (1) << 4;
- debuglogs (4, "get_hex_byte() -- Read first nibble 0x%x", val);
-
- val |= get_hex_digit (0);
- debuglogs (4, "get_hex_byte() -- Read second nibble 0x%x", val);
- *byt = val;
-
- debuglogs (4, "get_hex_byte() -- Read a 0x%x", val);
+ return monitor_expect (PROMPT, buf, buflen);
}
/* Get N 32-bit words from remote, each preceded by a space, and put
them in registers starting at REGNO. */
-static int
+static unsigned long
get_hex_word ()
{
- long val;
+ unsigned long val;
int i;
+ int ch;
- val = 0;
+ do
+ ch = readchar (timeout);
+ while (isspace(ch));
-#if 0
- if (HOST_BYTE_ORDER == BIG_ENDIAN)
- {
-#endif
- for (i = 0; i < 8; i++)
- val = (val << 4) + get_hex_digit (i == 0);
-#if 0
- }
- else
+ val = from_hex (ch);
+
+ for (i = 7; i >= 1; i--)
{
- for (i = 7; i >= 0; i--)
- val = (val << 4) + get_hex_digit (i == 0);
+ ch = readchar (timeout);
+ if (!isxdigit (ch))
+ break;
+ val = (val << 4) | from_hex (ch);
}
-#endif
-
- debuglogs (4, "get_hex_word() got a 0x%x for a %s host.",
- val,
- (HOST_BYTE_ORDER == BIG_ENDIAN) ? "big endian" : "little endian");
return val;
}
-/* This is called not only when we first attach, but also when the
- user types "run" after having attached. */
-
-void
-monitor_create_inferior (execfile, args, env)
- char *execfile;
- char *args;
- char **env;
-{
- int entry_pt;
-
- if (args && *args)
- error ("Can't pass arguments to remote MONITOR process");
-
- if (execfile == 0 || exec_bfd == 0)
- error ("No exec file specified");
-
- entry_pt = (int) bfd_get_start_address (exec_bfd);
-
- /* The "process" (board) is already stopped awaiting our commands, and
- the program is already downloaded. We just set its PC and go. */
-
- clear_proceed_status ();
-
- /* Tell wait_for_inferior that we've started a new process. */
- init_wait_for_inferior ();
-
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- target_terminal_init ();
-
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
- /* insert_step_breakpoint (); FIXME, do we need this? */
-
- /* Let 'er rip... */
- proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);
-}
-
/* Open a connection to a remote debugger. NAME is the filename used
for communication. */
-static int baudrate = 9600;
-static char dev_name[100];
+static char *dev_name;
+static struct target_ops *targ_ops;
void
-monitor_open (args, name, from_tty)
+monitor_open (args, mon_ops, from_tty)
char *args;
- char *name;
+ struct monitor_ops *mon_ops;
int from_tty;
{
- TERMINAL *temptempio;
+ char *name;
+ int i;
+ char **p;
+
+ if (mon_ops->magic != MONITOR_OPS_MAGIC)
+ error ("Magic number of monitor_ops struct wrong.");
+
+ targ_ops = mon_ops->target;
+ name = targ_ops->to_shortname;
- if (args == NULL)
+ if (!args)
error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\
`target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name);
-/* if (is_open) */
- monitor_close (0);
+ target_preopen (from_tty);
+
+ /* Setup pattern for register dump */
+
+ if (mon_ops->register_pattern)
+ {
+ int tmp;
+ char *val;
+
+ register_pattern.fastmap = fastmap;
+ tmp = re_set_syntax (RE_SYNTAX_EMACS);
+ val = re_compile_pattern (mon_ops->register_pattern,
+ strlen (mon_ops->register_pattern),
+ ®ister_pattern);
+ re_set_syntax (tmp);
+ if (val)
+ error ("Can't compiler register pattern string: %s!", val);
+ re_compile_fastmap (®ister_pattern);
+ }
+
+ unpush_target (targ_ops);
+
+ if (dev_name)
+ free (dev_name);
+ dev_name = strsave (args);
- strcpy (dev_name, args);
monitor_desc = SERIAL_OPEN (dev_name);
- if (monitor_desc == NULL)
+ if (!monitor_desc)
perror_with_name (dev_name);
if (baud_rate != -1)
if (SERIAL_SETBAUDRATE (monitor_desc, baud_rate))
{
SERIAL_CLOSE (monitor_desc);
- perror_with_name (name);
+ perror_with_name (dev_name);
}
}
SERIAL_RAW (monitor_desc);
+ SERIAL_FLUSH_INPUT (monitor_desc);
+
/* some systems only work with 2 stop bits */
-#if !defined(__GO32__) && !defined(GDB_TARGET_IS_PA_ELF)
- if (STOPBITS == 2) {
- if (!strchr (dev_name, ':')) { /* don't set for a tcp connection */
- temptempio = (TERMINAL *) SERIAL_GET_TTY_STATE (monitor_desc);
-#ifdef HAVE_SGTTY
- temptempio->sg_cflag |= baud_rate | CSTOPB;
-#else
- temptempio->c_cflag |= baud_rate | CSTOPB;
-#endif
- SERIAL_SET_TTY_STATE (monitor_desc, temptempio);
- debuglogs (4, "Set serial port to 2 stop bits");
- }
- }
-#endif /* __GO32__ */
-
-#if defined (LOG_FILE)
- log_file = fopen (LOG_FILE, "w");
- if (log_file == NULL)
- perror_with_name (LOG_FILE);
- fprintf_filtered (log_file, "GDB %s (%s", version, host_name);
- fprintf_filtered (log_file, " --target %s)\n", target_name);
- fprintf_filtered (log_file, "Remote target %s connected to %s\n\n",
- TARGET_NAME, dev_name);
-#endif
- /* see if the target is alive. For a ROM monitor, we can just try to
- force the prompt to print a few times. FOr the GDB remote
- protocol, the application being debugged is sitting at a
- breakpoint and waiting for GDB to initialize the connection. We
- force it to give us an empty packet to see if it's alive. */
+ SERIAL_SETSTOPBITS (monitor_desc, mon_ops->stopbits);
+
+ current_monitor = mon_ops;
- if (GDBPROTO)
+ /* See if we can wake up the monitor. First, try sending a stop sequence,
+ then send the init strings. Last, remove all breakpoints. */
+
+ if (current_monitor->stop)
{
- debuglogs (3, "Trying to ACK the target's debug stub");
- printf_monitor (INIT_CMD); /* ask for the last signal */
- expect ("$S05#b8",0); /* look for a response */
- printf_monitor ("+"); /* ask for the last signal */
- expect_prompt (1); /* See if we get a prompt */
+ monitor_stop ();
+ monitor_expect_prompt (NULL, 0);
}
- else
+
+ /* wake up the monitor and see if it's alive */
+ for (p = mon_ops->init; *p != NULL; p++)
{
- /* wake up the monitor and see if it's alive */
- printf_monitor (INIT_CMD);
- expect_prompt (1); /* See if we get a prompt */
+ monitor_printf (*p);
+ monitor_expect_prompt (NULL, 0);
+ }
+
+ SERIAL_FLUSH_INPUT (monitor_desc);
+
+ /* Remove all breakpoints */
- /* try again to be sure */
- printf_monitor (INIT_CMD);
- expect_prompt (1); /* See if we get a prompt */
+ if (mon_ops->clr_all_break)
+ {
+ monitor_printf (mon_ops->clr_all_break);
+ monitor_expect_prompt (NULL, 0);
}
if (from_tty)
- printf ("Remote target %s connected to %s\n", TARGET_NAME, dev_name);
+ printf_unfiltered ("Remote target %s connected to %s\n", name, dev_name);
+
+ push_target (targ_ops);
+
+ inferior_pid = 42000; /* Make run command think we are busy... */
+
+ /* Give monitor_wait something to read */
+
+ monitor_printf (current_monitor->line_term);
+
+ remote_dcache = dcache_init (monitor_read_memory, monitor_write_memory);
+
+ start_remote ();
}
/* Close out all files and local state before this target loses
control. */
-void
+static void
monitor_close (quitting)
int quitting;
{
- SERIAL_CLOSE (monitor_desc);
+ if (monitor_desc)
+ SERIAL_CLOSE (monitor_desc);
monitor_desc = NULL;
-
- debuglogs (1, "monitor_close (quitting=%d)", quitting);
-
-#if defined (LOG_FILE)
- if (log_file)
- {
- if (ferror (log_file))
- printf_filtered ("Error writing log file.\n");
- if (fclose (log_file) != 0)
- printf_filtered ("Error closing log file.\n");
- }
-#endif
}
/* Terminate the open connection to the remote debugger. Use this
when you want to detach and do something else with your gdb. */
-void
-monitor_detach (from_tty)
+static void
+monitor_detach (args, from_tty)
+ char *args;
int from_tty;
{
- debuglogs (1, "monitor_detach ()");
-
pop_target (); /* calls monitor_close to do the real work */
if (from_tty)
- printf ("Ending remote %s debugging\n", target_shortname);
+ printf_unfiltered ("Ending remote %s debugging\n", target_shortname);
}
-/* Attach GDB to the target. */
+/* Convert VALSTR into the target byte-ordered value of REGNO and store it. */
-void
-monitor_attach (args, from_tty)
- char *args;
- int from_tty;
+char *
+monitor_supply_register (regno, valstr)
+ int regno;
+ char *valstr;
{
- if (from_tty)
- printf ("Starting remote %s debugging\n", target_shortname);
-
- debuglogs (1, "monitor_attach (args=%s)", args);
-
- printf_monitor (GO_CMD);
- /* swallow the echo. */
- expect (GO_CMD, 1);
+ unsigned LONGEST val;
+ unsigned char regbuf[MAX_REGISTER_RAW_SIZE];
+ char *p;
+
+ val = strtoul (valstr, &p, 16);
+
+ if (val == 0 && valstr == p)
+ error ("monitor_supply_register (%d): bad value from monitor: %s.",
+ regno, valstr);
+
+ /* supply register stores in target byte order, so swap here */
+
+ store_unsigned_integer (regbuf, REGISTER_RAW_SIZE (regno), val);
+
+ supply_register (regno, regbuf);
+
+ return p;
}
-
+
/* Tell the remote machine to resume. */
-void
+static void
monitor_resume (pid, step, sig)
int pid, step;
enum target_signal sig;
{
- debuglogs (1, "monitor_resume (step=%d, sig=%d)", step, sig);
-
+ dcache_flush (remote_dcache);
if (step)
- printf_monitor (STEP_CMD);
+ monitor_printf (STEP_CMD);
else
- printf_monitor (CONT_CMD);
+ {
+ monitor_printf (CONT_CMD);
+ if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT)
+ dump_reg_flag = 1;
+ }
}
-/* Wait until the remote machine stops, then return, storing status in
- status just as `wait' would. */
+/* Parse the output of a register dump command. A monitor specific regexp is
+ used to extract individual register descriptions of the form REG=VAL. Each
+ description is split up into a name and a value string which are passed down
+ to monitor specific code. */
-int
-monitor_wait (pid, status)
- int pid;
- struct target_waitstatus *status;
+static char *
+parse_register_dump (buf, len)
+ char *buf;
+ int len;
{
- int old_timeout = timeout;
+ while (1)
+ {
+ int regnamelen, vallen;
+ char *regname, *val;
- debuglogs(1, "monitor_wait (), printing extraneous text.");
-
- status->kind = TARGET_WAITKIND_EXITED;
- status->value.integer = 0;
+ if (re_search (®ister_pattern, buf, len, 0, len,
+ ®ister_strings) == -1)
+ break;
- timeout = 0; /* Don't time out -- user program is running. */
+ regnamelen = register_strings.end[1] - register_strings.start[1];
+ regname = buf + register_strings.start[1];
+ vallen = register_strings.end[2] - register_strings.start[2];
+ val = buf + register_strings.start[2];
- expect_prompt (0); /* Wait for prompt, outputting extraneous text */
- debuglogs (4, "monitor_wait(), got the prompt.");
+ current_monitor->supply_register (regname, regnamelen, val, vallen);
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = TARGET_SIGNAL_TRAP;
+ buf += register_strings.end[0];
+ len -= register_strings.end[0];
+ }
+}
- timeout = old_timeout;
+/* Send ^C to target to halt it. Target will respond, and send us a
+ packet. */
+
+static void
+monitor_interrupt (signo)
+ int signo;
+{
+ /* If this doesn't work, try more severe steps. */
+ signal (signo, monitor_interrupt_twice);
+
+ if (remote_debug)
+ printf_unfiltered ("monitor_interrupt called\n");
- return 0;
+ target_stop ();
}
-/* Return the name of register number regno in the form input and output by
- monitor. Currently, register_names just happens to contain exactly what
- monitor wants. Lets take advantage of that just as long as possible! */
+/* The user typed ^C twice. */
-static char *
-get_reg_name (regno)
- int regno;
+static void
+monitor_interrupt_twice (signo)
+ int signo;
{
- static char buf[50];
- const char *p;
- char *b;
-
- b = buf;
+ signal (signo, ofunc);
+
+ monitor_interrupt_query ();
- if (regno < 0)
- return ("");
+ signal (signo, monitor_interrupt);
+}
- for (p = REGNAMES (regno); *p; p++)
- *b++ = tolower (*p);
+/* Ask the user what to do when an interrupt is received. */
- *b = '\000';
+static void
+monitor_interrupt_query ()
+{
+ target_terminal_ours ();
- debuglogs (5, "Got name \"%s\" from regno #%d.", buf, regno);
+ if (query ("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? "))
+ {
+ target_mourn_inferior ();
+ return_to_top_level (RETURN_QUIT);
+ }
- return buf;
+ target_terminal_inferior ();
}
-/* Read the remote registers into the block regs. */
+static void
+monitor_wait_cleanup (old_timeout)
+ int old_timeout;
+{
+ timeout = old_timeout;
+ signal (SIGINT, ofunc);
+ in_monitor_wait = 0;
+}
-void
-monitor_fetch_registers (ignored)
- int ignored;
+/* Wait until the remote machine stops, then return, storing status in
+ status just as `wait' would. */
+
+static int
+monitor_wait (pid, status)
+ int pid;
+ struct target_waitstatus *status;
{
- int regno, i;
- unsigned char packet[PBUFSIZ];
- char regs[REGISTER_BYTES];
+ int old_timeout = timeout;
+ char buf[1024];
+ int resp_len;
+ struct cleanup *old_chain;
- debuglogs (1, "monitor_fetch_registers (ignored=%d)\n", ignored);
+ status->kind = TARGET_WAITKIND_EXITED;
+ status->value.integer = 0;
+
+ old_chain = make_cleanup (monitor_wait_cleanup, old_timeout);
+
+#ifdef MAINTENANCE_CMDS
+ in_monitor_wait = 1;
+ timeout = watchdog > 0 ? watchdog : -1;
+#else
+ timeout = -1; /* Don't time out -- user program is running. */
+#endif
- memset (packet, 0, PBUFSIZ);
- if (GDBPROTO)
+ ofunc = (void (*)()) signal (SIGINT, monitor_interrupt);
+
+ do
{
- /* Unimplemented registers read as all bits zero. */
- memset (regs, 0, REGISTER_BYTES);
- make_gdb_packet (packet, "g");
- if (monitor_send_packet (packet) == 0)
- error ("Couldn't transmit packet\n");
- if (monitor_get_packet (packet) == 0)
- error ("Couldn't receive packet\n");
- /* FIXME: read bytes from packet */
- debuglogs (4, "monitor_fetch_registers: Got a \"%s\" back\n", packet);
- for (regno = 0; regno <= PC_REGNUM+4; regno++)
- {
- /* supply register stores in target byte order, so swap here */
- /* FIXME: convert from ASCII hex to raw bytes */
- i = ascii2hexword (packet + (regno * 8));
- debuglogs (5, "Adding register %d = %x\n", regno, i);
- SWAP_TARGET_AND_HOST (&i, 4);
- supply_register (regno, (char *)&i);
- }
+ resp_len = monitor_expect_prompt (buf, sizeof (buf));
+
+ if (resp_len <= 0)
+ fprintf_unfiltered (gdb_stderr, "monitor_wait: excessive response from monitor: %s.", buf);
}
- else
+ while (resp_len < 0);
+
+ signal (SIGINT, ofunc);
+
+ timeout = old_timeout;
+
+ if (dump_reg_flag && current_monitor->dump_registers)
{
- for (regno = 0; regno <= PC_REGNUM; regno++)
- monitor_fetch_register (regno);
+ dump_reg_flag = 0;
+
+ monitor_printf (current_monitor->dump_registers);
+ resp_len = monitor_expect_prompt (buf, sizeof (buf));
}
+
+ if (current_monitor->register_pattern)
+ parse_register_dump (buf, resp_len);
+
+ status->kind = TARGET_WAITKIND_STOPPED;
+ status->value.sig = TARGET_SIGNAL_TRAP;
+
+ discard_cleanups (old_chain);
+
+ in_monitor_wait = 0;
+
+ return inferior_pid;
}
/* Fetch register REGNO, or all registers if REGNO is -1. Returns
errno value. */
-void
+static void
monitor_fetch_register (regno)
int regno;
{
- int val;
char *name;
+ static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+ char regbuf[MAX_REGISTER_RAW_SIZE * 2 + 1];
+ int i;
- debuglogs (1, "monitor_fetch_register (reg=%s)", get_reg_name (regno));
+ name = REGNAMES (regno);
- if (regno < 0)
- monitor_fetch_registers ();
- else
+ if (!name)
{
- name = get_reg_name (regno);
-
- if (STREQ (name, ""))
- return;
-
- printf_monitor (ROMCMD (GET_REG), name); /* send the command */
- expect (name, 1); /* then strip the leading garbage */
- if (*ROMDELIM (GET_REG) != 0)
- expect (ROMDELIM (GET_REG), 1);
-
- val = get_hex_word (); /* get the value, ignore junk */
-
- /* supply register stores in target byte order, so swap here */
- SWAP_TARGET_AND_HOST (&val, 4);
- supply_register (regno, (char *) &val);
-
- if (*ROMDELIM(GET_REG) != 0)
- {
- /*** expect (ROMRES(GET_REG)); ***/
- printf_monitor (CMD_END);
- }
- expect_prompt (1);
+ supply_register (regno, zerobuf);
+ return;
}
-}
-/* Store the remote registers. */
+ /* send the register examine command */
-void
-monitor_store_registers (ignored)
- int ignored;
-{
- int regno;
- unsigned long i;
- char packet[PBUFSIZ];
- char buf[PBUFSIZ];
- char num[9];
-
- debuglogs (1, "monitor_store_registers()");
+ monitor_printf (current_monitor->getreg.cmd, name);
- if (GDBPROTO)
+/* If RESP_DELIM is specified, we search for that as a leading delimiter for
+ the register value. Otherwise, we just start searching from the start of
+ the buf. */
+
+ if (current_monitor->getreg.resp_delim)
+ monitor_expect (current_monitor->getreg.resp_delim, NULL, 0);
+
+/* Now, read the appropriate number of hex digits for this register, skipping
+ spaces. */
+
+ for (i = 0; i < REGISTER_RAW_SIZE (regno) * 2; i++)
{
- memset (packet, 0, PBUFSIZ);
- memset (buf, 0, PBUFSIZ);
- buf[0] = 'G';
+ int c;
- /* Unimplemented registers read as all bits zero. */
- /* FIXME: read bytes from packet */
- for (regno = 0; regno < 41; regno++) /* FIXME */
+ while (1)
{
- /* supply register stores in target byte order, so swap here */
- /* FIXME: convert from ASCII hex to raw bytes */
- i = (unsigned long)read_register (regno);
-#if 0
- SWAP_TARGET_AND_HOST (&i, 4);
-#endif
- hexword2ascii (num, i);
- strcpy (buf + (regno * 8) + 1, num);
+ c = readchar (timeout);
+ if (isxdigit (c))
+ break;
+ if (c == ' ')
+ continue;
+
+ error ("monitor_fetch_register (%d): bad response from monitor: %.*s%c.",
+ regno, i, regbuf, c);
}
- *(buf + (regno * 8) + 2) = 0;
- make_gdb_packet (packet, buf);
- if (monitor_send_packet (packet) == 0)
- error ("Couldn't transmit packet\n");
- if (monitor_get_packet (packet) == 0)
- error ("Couldn't receive packet\n");
+ regbuf[i] = c;
+ }
+
+ regbuf[i] = '\000'; /* terminate the number */
+
+/* If TERM is present, we wait for that to show up. Also, (if TERM is
+ present), we will send TERM_CMD if that is present. In any case, we collect
+ all of the output into buf, and then wait for the normal prompt. */
+
+ if (current_monitor->getreg.term)
+ {
+ monitor_expect (current_monitor->getreg.term, NULL, 0); /* get response */
+
+ if (current_monitor->getreg.term_cmd)
+ {
+ monitor_printf (current_monitor->getreg.term_cmd);
+ monitor_expect_prompt (NULL, 0);
+ }
}
else
+ monitor_expect_prompt (NULL, 0); /* get response */
+
+ monitor_supply_register (regno, regbuf);
+}
+
+/* Read the remote registers into the block regs. */
+
+static void monitor_dump_regs ()
+{
+ if (current_monitor->dump_registers)
{
- for (regno = 0; regno <= PC_REGNUM; regno++)
- monitor_store_register(regno);
+ char buf[200];
+ int resp_len;
+ monitor_printf (current_monitor->dump_registers);
+ resp_len = monitor_expect_prompt (buf, sizeof (buf));
+ parse_register_dump (buf, resp_len);
}
+ else
+ abort(); /* Need some way to read registers */
+}
+
+static void
+monitor_fetch_registers (regno)
+ int regno;
+{
+ if (current_monitor->getreg.cmd)
+ {
+ if (regno >= 0)
+ {
+ monitor_fetch_register (regno);
+ return;
+ }
- registers_changed ();
+ for (regno = 0; regno < NUM_REGS; regno++)
+ monitor_fetch_register (regno);
+ }
+ else {
+ monitor_dump_regs ();
+ }
}
/* Store register REGNO, or all if REGNO == 0. Return errno value. */
-void
+static void
monitor_store_register (regno)
int regno;
{
char *name;
- int i;
+ unsigned LONGEST val;
- i = read_register (regno);
+ name = REGNAMES (regno);
+ if (!name)
+ return;
- debuglogs (1, "monitor_store_register (regno=%d)", regno);
+ val = read_register (regno);
- if (regno < 0)
- monitor_store_registers ();
- else
+ /* send the register deposit command */
+
+ monitor_printf (current_monitor->setreg.cmd, name, val);
+
+/* It's possible that there are actually some monitors out there that will
+ prompt you when you set a register. In that case, you may need to add some
+ code here to deal with TERM and TERM_CMD (see monitor_fetch_register to get
+ an idea of what's needed...) */
+
+ monitor_expect_prompt (NULL, 0);
+}
+
+/* Store the remote registers. */
+
+static void
+monitor_store_registers (regno)
+ int regno;
+{
+ if (regno >= 0)
{
- debuglogs (3, "Setting register %s to 0x%x",
- get_reg_name (regno), read_register (regno));
-
- name = get_reg_name (regno);
- if (STREQ (name, ""))
- return;
- printf_monitor (ROMCMD (SET_REG), name, read_register (regno));
- expect (name, 1); /* strip the leading garbage */
- if (*ROMDELIM (SET_REG) != 0)
- {
- expect (ROMDELIM (SET_REG), 1);
- get_hex_word (1);
- printf_monitor ("%d%s\n", i, CMD_END);
- }
- expect_prompt (1);
+ monitor_store_register (regno);
+ return;
}
- return;
-#if 0
- printf_monitor (SET_REG, get_reg_name (regno),
- read_register (regno));
- expect_prompt (1);
-#endif
+ for (regno = 0; regno < NUM_REGS; regno++)
+ monitor_store_register (regno);
}
/* Get ready to modify the registers array. On machines which store
that registers contains all the registers from the program being
debugged. */
-void
+static void
monitor_prepare_to_store ()
{
/* Do nothing, since we can store individual regs */
}
-void
-monitor_files_info ()
+static void
+monitor_files_info (ops)
+ struct target_ops *ops;
+{
+ printf_unfiltered ("\tAttached to %s at %d baud.\n", dev_name, baud_rate);
+}
+
+static int
+monitor_write_memory (memaddr, myaddr, len)
+ CORE_ADDR memaddr;
+ unsigned char *myaddr;
+ int len;
{
- printf ("\tAttached to %s at %d baud.\n", dev_name, baudrate);
+ unsigned LONGEST val;
+ char *cmd;
+ int i;
+
+ /* Use memory fill command for leading 0 bytes. */
+
+ if (current_monitor->fill)
+ {
+ for (i = 0; i < len; i++)
+ if (myaddr[i] != 0)
+ break;
+
+ if (i > 4) /* More than 4 zeros is worth doing */
+ {
+ if (current_monitor->flags & MO_FILL_USES_ADDR)
+ monitor_printf (current_monitor->fill, memaddr, memaddr + i, 0);
+ else
+ monitor_printf (current_monitor->fill, memaddr, i, 0);
+
+ monitor_expect_prompt (NULL, 0);
+
+ return i;
+ }
+ }
+
+ if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->setmem.cmdll)
+ {
+ len = 8;
+ cmd = current_monitor->setmem.cmdll;
+ }
+ else if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->setmem.cmdl)
+ {
+ len = 4;
+ cmd = current_monitor->setmem.cmdl;
+ }
+ else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->setmem.cmdw)
+ {
+ len = 2;
+ cmd = current_monitor->setmem.cmdw;
+ }
+ else
+ {
+ len = 1;
+ cmd = current_monitor->setmem.cmdb;
+ }
+
+ val = extract_unsigned_integer (myaddr, len);
+
+ monitor_printf (cmd, memaddr, val);
+
+ monitor_expect_prompt (NULL, 0);
+
+ return len;
}
-/* Copy LEN bytes of data from debugger memory at MYADDR to inferior's
- memory at MEMADDR. Returns length moved. */
+/* This is an alternate form of monitor_read_memory which is used for monitors
+ which can only read a single byte/word/etc. at a time. */
-int
-monitor_write_inferior_memory (memaddr, myaddr, len)
+static int
+monitor_read_memory_single (memaddr, myaddr, len)
CORE_ADDR memaddr;
unsigned char *myaddr;
int len;
{
- unsigned long i;
- int j;
- char packet[PBUFSIZ];
- char buf[PBUFSIZ];
- char num[9];
+ unsigned LONGEST val;
+ char membuf[sizeof(LONGEST) * 2 + 1];
char *p;
-
- debuglogs (1, "monitor_write_inferior_memory (memaddr=0x%x, myaddr=0x%x, len=%d)",
- memaddr, myaddr, len);
- memset (buf, '\0', PBUFSIZ); /* this also sets the string terminator */
- p = buf;
+ char *cmd;
+ int i;
+
+ if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->getmem.cmdll)
+ {
+ len = 8;
+ cmd = current_monitor->getmem.cmdll;
+ }
+ else if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->getmem.cmdl)
+ {
+ len = 4;
+ cmd = current_monitor->getmem.cmdl;
+ }
+ else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->getmem.cmdw)
+ {
+ len = 2;
+ cmd = current_monitor->getmem.cmdw;
+ }
+ else
+ {
+ len = 1;
+ cmd = current_monitor->getmem.cmdb;
+ }
+
+/* Send the examine command. */
+
+ monitor_printf (cmd, memaddr);
- if (GDBPROTO)
+/* If RESP_DELIM is specified, we search for that as a leading delimiter for
+ the register value. Otherwise, we just start searching from the start of
+ the buf. */
+
+ if (current_monitor->getmem.resp_delim)
+ monitor_expect (current_monitor->getmem.resp_delim, NULL, 0);
+
+/* Now, read the appropriate number of hex digits for this loc, skipping
+ spaces. */
+
+ for (i = 0; i < len * 2; i++)
{
- *p++ = 'M'; /* The command to write memory */
- hexword2ascii (num, memaddr); /* convert the address */
- strcpy (p, num); /* copy the address */
- p += 8;
- *p++ = ','; /* add comma delimeter */
- hexword2ascii (num, len); /* Get the length as a 4 digit number */
- *p++ = num[4];
- *p++ = num[5];
- *p++ = num[6];
- *p++ = num[7];
- *p++ = ':'; /* add the colon delimeter */
- for (j = 0; j < len; j++)
- { /* copy the data in after converting it */
- *p++ = tohex ((myaddr[j] >> 4) & 0xf);
- *p++ = tohex (myaddr[j] & 0xf);
+ int c;
+
+ while (1)
+ {
+ c = readchar (timeout);
+ if (isxdigit (c))
+ break;
+ if (c == ' ')
+ continue;
+
+ error ("monitor_read_memory_single (0x%x): bad response from monitor: %.*s%c.",
+ memaddr, i, membuf, c);
}
- make_gdb_packet (packet, buf);
- if (monitor_send_packet (packet) == 0)
- error ("Couldn't transmit packet\n");
- if (monitor_get_packet (packet) == 0)
- error ("Couldn't receive packet\n");
+ membuf[i] = c;
}
- else
+
+ membuf[i] = '\000'; /* terminate the number */
+
+/* If TERM is present, we wait for that to show up. Also, (if TERM is
+ present), we will send TERM_CMD if that is present. In any case, we collect
+ all of the output into buf, and then wait for the normal prompt. */
+
+ if (current_monitor->getmem.term)
{
- for (i = 0; i < len; i++)
+ monitor_expect (current_monitor->getmem.term, NULL, 0); /* get response */
+
+ if (current_monitor->getmem.term_cmd)
{
- printf_monitor (ROMCMD (SET_MEM), memaddr + i, myaddr[i]);
- if (*ROMDELIM (SET_MEM) != 0)
- {
- expect (ROMDELIM (SET_MEM), 1);
- expect (CMD_DELIM);
- printf_monitor ("%x", myaddr[i]);
- }
- /*** printf_monitor ("%x", myaddr[i]); ***/
- if (sr_get_debug() > 1)
- printf ("\nSet 0x%x to 0x%x\n", memaddr + i, myaddr[i]);
- if (*ROMDELIM (SET_MEM) != 0)
- {
- expect (CMD_DELIM);
- printf_monitor (CMD_END);
- }
- expect_prompt (1);
+ monitor_printf (current_monitor->getmem.term_cmd);
+ monitor_expect_prompt (NULL, 0);
}
}
+ else
+ monitor_expect_prompt (NULL, 0); /* get response */
+
+ p = membuf;
+ val = strtoul (membuf, &p, 16);
+
+ if (val == 0 && membuf == p)
+ error ("monitor_read_memory_single (0x%x): bad value from monitor: %s.",
+ memaddr, membuf);
+
+ /* supply register stores in target byte order, so swap here */
+
+ store_unsigned_integer (myaddr, len, val);
+
return len;
}
-/* Read LEN bytes from inferior memory at MEMADDR. Put the result at
- debugger address MYADDR. Returns length moved. */
+/* Copy LEN bytes of data from debugger memory at MYADDR to inferior's memory
+ at MEMADDR. Returns length moved. Currently, we only do one byte at a
+ time. */
-int
-monitor_read_inferior_memory(memaddr, myaddr, len)
+static int
+monitor_read_memory (memaddr, myaddr, len)
CORE_ADDR memaddr;
char *myaddr;
int len;
{
- int i, j;
- char buf[20];
- char packet[PBUFSIZ];
-
- /* Number of bytes read so far. */
- int count;
-
- /* Starting address of this pass. */
- unsigned long startaddr;
-
- /* Starting address of this pass. */
- unsigned long endaddr;
-
- /* Number of bytes to read in this pass. */
- int len_this_pass;
-
- debuglogs (1, "monitor_read_inferior_memory (memaddr=0x%x, myaddr=0x%x, len=%d)", memaddr, myaddr, len);
-
- /* Note that this code works correctly if startaddr is just less
- than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
- thing). That is, something like
- monitor_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
- works--it never adds len To memaddr and gets 0. */
- /* However, something like
- monitor_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
- doesn't need to work. Detect it and give up if there's an attempt
- to do that. */
- if (((memaddr - 1) + len) < memaddr)
- {
- errno = EIO;
- return 0;
- }
-
- startaddr = memaddr;
- count = 0;
- while (count < len)
+ unsigned LONGEST val;
+ unsigned char regbuf[MAX_REGISTER_RAW_SIZE];
+ char buf[512];
+ char *p, *p1;
+ char *name;
+ int resp_len;
+ int i;
+
+ if (current_monitor->flags & MO_GETMEM_READ_SINGLE)
+ return monitor_read_memory_single (memaddr, myaddr, len);
+
+ len = min (len, 16);
+
+/* See if xfer would cross a 16 byte boundary. If so, clip it. */
+ if (((memaddr ^ (memaddr + len - 1)) & ~0xf) != 0)
+ len = ((memaddr + len) & ~0xf) - memaddr;
+
+ /* send the memory examine command */
+
+ if (current_monitor->flags & MO_GETMEM_NEEDS_RANGE)
+ monitor_printf (current_monitor->getmem.cmdb, memaddr, memaddr + len - 1);
+ else
+ monitor_printf (current_monitor->getmem.cmdb, memaddr, len);
+
+/* If TERM is present, we wait for that to show up. Also, (if TERM is
+ present), we will send TERM_CMD if that is present. In any case, we collect
+ all of the output into buf, and then wait for the normal prompt. */
+
+ if (current_monitor->getmem.term)
{
- len_this_pass = 16;
- if ((startaddr % 16) != 0)
- len_this_pass -= startaddr % 16;
- if (len_this_pass > (len - count))
- len_this_pass = (len - count);
-
- debuglogs (3, "Display %d bytes at %x for Big Endian host",
- len_this_pass, startaddr);
-
- if (GDBPROTO)
+ resp_len = monitor_expect (current_monitor->getmem.term, buf, sizeof buf); /* get response */
+
+ if (resp_len <= 0)
+ error ("monitor_read_memory (0x%x): excessive response from monitor: %.*s.",
+ memaddr, resp_len, buf);
+
+ if (current_monitor->getmem.term_cmd)
{
- for (i = 0; i < len_this_pass; i++)
- {
- sprintf (buf, "m%08x,%04x", startaddr, len_this_pass);
- make_gdb_packet (packet, buf);
- if (monitor_send_packet (packet) == 0)
- error ("Couldn't transmit packet\n");
- if (monitor_get_packet (packet) == 0)
- error ("Couldn't receive packet\n");
- debuglogs (4, "monitor_read_inferior: Got a \"%s\" back\n",
- packet);
- for (j = 0; j < len_this_pass ; j++)
- {
- myaddr[count++] =
- from_hex (*(packet+(j*2))) * 16
- + from_hex (*(packet+(j*2)+1));
- debuglogs (5, "myaddr set to %x\n", myaddr[count-1]);
- }
- startaddr += 1;
- }
+ SERIAL_WRITE (monitor_desc, current_monitor->getmem.term_cmd,
+ strlen (current_monitor->getmem.term_cmd));
+ monitor_expect_prompt (NULL, 0);
}
- else
+ }
+ else
+ resp_len = monitor_expect_prompt (buf, sizeof buf); /* get response */
+
+ p = buf;
+
+ /* If RESP_DELIM is specified, we search for that as a leading delimiter for
+ the values. Otherwise, we just start searching from the start of the buf.
+ */
+
+ if (current_monitor->getmem.resp_delim)
+ {
+ p = strstr (p, current_monitor->getmem.resp_delim);
+ if (!p)
+ error ("monitor_read_memory (0x%x): bad response from monitor: %.*s.",
+ memaddr, resp_len, buf);
+ p += strlen (current_monitor->getmem.resp_delim);
+ }
+
+ for (i = len; i > 0; i--)
+ {
+ /* Skip non-hex chars, but bomb on end of string and newlines */
+
+ while (1)
{
- for (i = 0; i < len_this_pass; i++)
- {
- printf_monitor (ROMCMD (GET_MEM), startaddr, startaddr);
- sprintf (buf, ROMCMD (GET_MEM), startaddr, startaddr);
- if (*ROMDELIM(GET_MEM) != 0)
- {
- expect (ROMDELIM(GET_MEM), 1);
- }
- else
- {
- sprintf (buf, ROMCMD (GET_MEM), startaddr, startaddr);
- expect (buf,1); /* get the command echo */
- get_hex_word (1); /* strip away the address */
- }
- get_hex_byte (&myaddr[count++]); /* get the value at this address */
-
- if (*ROMDELIM(GET_MEM) != 0)
- printf_monitor (CMD_END);
- expect_prompt (1);
- startaddr += 1;
- }
+ if (isxdigit (*p))
+ break;
+ if (*p == '\000' || *p == '\n' || *p == '\r')
+ error ("monitor_read_memory (0x%x): badly terminated response from monitor: %.*s", memaddr, resp_len, buf);
+ p++;
}
+
+ val = strtoul (p, &p1, 16);
+
+ if (val == 0 && p == p1)
+ error ("monitor_read_memory (0x%x): bad value from monitor: %.*s.", memaddr,
+ resp_len, buf);
+
+ *myaddr++ = val;
+
+ if (i == 1)
+ break;
+
+ p = p1;
}
+
return len;
}
-/* FIXME-someday! merge these two. */
-
-int
-monitor_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+static int
+monitor_xfer_memory (memaddr, myaddr, len, write, target)
CORE_ADDR memaddr;
char *myaddr;
int len;
int write;
struct target_ops *target; /* ignored */
{
- if (write)
- return monitor_write_inferior_memory (memaddr, myaddr, len);
- else
- return monitor_read_inferior_memory (memaddr, myaddr, len);
+ return dcache_xfer_memory (remote_dcache, memaddr, myaddr, len, write);
+}
+
+static void
+monitor_kill ()
+{
+ return; /* ignore attempts to kill target system */
}
-void
-monitor_kill (args, from_tty)
+/* All we actually do is set the PC to the start address of exec_bfd, and start
+ the program at that point. */
+
+static void
+monitor_create_inferior (exec_file, args, env)
+ char *exec_file;
char *args;
- int from_tty;
+ char **env;
{
- return; /* ignore attempts to kill target system */
+ if (args && (*args != '\000'))
+ error ("Args are not supported by the monitor.");
+
+ clear_proceed_status ();
+ proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0);
}
/* Clean up when a program exits.
run again without a download. Don't leave it full of breakpoint
instructions. */
-void
+static void
monitor_mourn_inferior ()
{
- remove_breakpoints ();
+ unpush_target (targ_ops);
generic_mourn_inferior (); /* Do all the proper things now */
}
-#define MAX_MONITOR_BREAKPOINTS 16
+#define NUM_MONITOR_BREAKPOINTS 8
-extern int memory_breakpoint_size;
-static CORE_ADDR breakaddr[MAX_MONITOR_BREAKPOINTS] = {0};
+static CORE_ADDR breakaddr[NUM_MONITOR_BREAKPOINTS] = {0};
/* Tell the monitor to add a breakpoint. */
-int
+static int
monitor_insert_breakpoint (addr, shadow)
CORE_ADDR addr;
char *shadow;
{
int i;
+ static unsigned char break_insn[] = BREAKPOINT;
- debuglogs (1, "monitor_insert_breakpoint() addr = 0x%x", addr);
-
- for (i = 0; i <= MAX_MONITOR_BREAKPOINTS; i++)
+ for (i = 0; i < NUM_MONITOR_BREAKPOINTS; i++)
{
if (breakaddr[i] == 0)
{
breakaddr[i] = addr;
- if (sr_get_debug () > 4)
- printf ("Breakpoint at %x\n", addr);
- monitor_read_inferior_memory (addr, shadow, memory_breakpoint_size);
- printf_monitor (SET_BREAK_CMD, addr);
- expect_prompt (1);
+ monitor_read_memory (addr, shadow, sizeof (break_insn));
+ monitor_printf (SET_BREAK_CMD, addr);
+ monitor_expect_prompt (NULL, 0);
return 0;
}
}
- fprintf (stderr, "Too many breakpoints (> 16) for monitor\n");
- return 1;
+ error ("Too many breakpoints (> %d) for monitor.", NUM_MONITOR_BREAKPOINTS);
}
/* Tell the monitor to remove a breakpoint. */
-int
+static int
monitor_remove_breakpoint (addr, shadow)
CORE_ADDR addr;
char *shadow;
{
int i;
- debuglogs (1, "monitor_remove_breakpoint() addr = 0x%x", addr);
-
- for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++)
+ for (i = 0; i < NUM_MONITOR_BREAKPOINTS; i++)
{
if (breakaddr[i] == addr)
{
breakaddr[i] = 0;
/* some monitors remove breakpoints based on the address */
- if (CLR_BREAK_ADDR)
- printf_monitor(CLR_BREAK_CMD, addr);
+ if (current_monitor->flags & MO_CLR_BREAK_USES_ADDR)
+ monitor_printf (CLR_BREAK_CMD, addr);
else
- printf_monitor(CLR_BREAK_CMD, i);
- expect_prompt (1);
+ monitor_printf (CLR_BREAK_CMD, i);
+ monitor_expect_prompt (NULL, 0);
return 0;
}
}
- fprintf (stderr, "Can't find breakpoint associated with 0x%x\n", addr);
+ fprintf_unfiltered (stderr, "Can't find breakpoint associated with 0x%x\n", addr);
return 1;
}
-/* monitor_load -- load a file. This file determines which of the
- * supported formats to use. The current types are:
- * FIXME: not all types supported yet.
- * default - reads any file using bfd and writes it to memory. This
- * is really slow.
- * srec - reads binary file using bfd and writes it as an
- * ascii srecord.
- * xmodem-bin - reads a binary file using bfd, and downloads it
- * using xmodem protocol.
- * xmodem-srec - reads a binary file using bfd, and after converting
- * it downloads it as an srecord using xmodem protocol.
- * ascii-srec - reads a ascii srecord file and downloads it
- * without a change.
- * ascii-xmodem - reads a ascii file and downloads using xmodem
- * protocol.
- */
+/* monitor_load -- download a file. */
-void
-monitor_load (file, fromtty)
+static void
+monitor_load (file, from_tty)
char *file;
- int fromtty;
+ int from_tty;
{
- debuglogs (1, "Loading %s to monitor", file);
+ dcache_flush (remote_dcache);
- /* default, load a binary */
- if (STREQ (loadtype_str, "default"))
- {
- gr_load_image (file, fromtty); /* by writing it into memory */
- return;
- }
+ if (current_monitor->load_routine)
+ current_monitor->load_routine (monitor_desc, file, hashmark);
+ else
+ monitor_load_srec (file);
- /* load an srecord by converting */
- if ((STREQ (loadtype_str, "srec")) && STREQ (loadproto_str, "xmodem"))
- {
- monitor_load_srec (file, XMODEM);
- return;
- }
+/* Finally, make the PC point at the start address */
- /* load an srecord by converting */
- if (STREQ (loadtype_str, "srec"))
- {
- monitor_load_srec (file, 0); /* if from a binary */
- return;
- }
+ if (exec_bfd)
+ write_pc (bfd_get_start_address (exec_bfd));
- /* load an srecord by converting */
- if (STREQ (loadtype_str, "none"))
- {
- error ("Unimplemented");
- return;
- }
+ inferior_pid = 0; /* No process now */
- /* load an srecord file */
- if (STREQ (loadproto_str, "none"))
- {
- monitor_load_ascii_srec (file, fromtty); /* if from a binary */
- return;
- }
+/* This is necessary because many things were based on the PC at the time that
+ we attached to the monitor, which is no longer valid now that we have loaded
+ new code (and just changed the PC). Another way to do this might be to call
+ normal_stop, except that the stack may not be valid, and things would get
+ horribly confused... */
- if (STREQ (loadproto_str, "xmodem"))
- {
- monitor_load_srec (file, XMODEM);
- return;
- }
+ clear_symtab_users ();
}
-/* Download an ASCII srecord file. */
-
-#define DOWNLOAD_LINE_SIZE 100
-
static void
-monitor_load_ascii_srec (file, fromtty)
- char *file;
- int fromtty;
+monitor_stop ()
{
- FILE *download;
- char buf[DOWNLOAD_LINE_SIZE];
- int i, bytes_read;
-
- debuglogs (1, "Loading an ASCII srecord file, %s.", file);
-
- download = fopen (file, "r");
- if (download == NULL)
- {
- error ("%s does not exist", file);
- return;
- }
-
- printf_monitor (LOAD_CMD);
- sleep (1);
- while (!feof (download))
- {
- bytes_read = fread (buf, sizeof (char), DOWNLOAD_LINE_SIZE, download);
- if (hashmark)
- {
- putchar ('.');
- fflush (stdout);
- }
- if (SERIAL_WRITE (monitor_desc, buf, bytes_read))
- {
- fprintf (stderr, "SERIAL_WRITE failed: (while downloading) %s\n",
- safe_strerror (errno));
- break;
- }
- i = 0;
- while (i++ <=200) {} ; /* Ugly HACK, probably needs flow control */
- if (bytes_read < DOWNLOAD_LINE_SIZE)
- {
- if (!feof (download))
- error ("Only read %d bytes\n", bytes_read);
- break;
- }
- }
-
- if (hashmark)
- putchar ('\n');
-
- if (!feof (download))
- error ("Never got EOF while downloading");
- expect_prompt (1);
- fclose (download);
+ if (current_monitor->stop)
+ monitor_printf_noecho (current_monitor->stop);
}
/* Put a command string, in args, out to MONITOR. Output from MONITOR
is placed on the users terminal until the prompt is seen. FIXME: We
read the characters ourseleves here cause of a nasty echo. */
-void
-monitor_command (args, fromtty)
+static void
+monitor_command (args, from_tty)
char *args;
- int fromtty;
+ int from_tty;
{
char *p;
-
- p = PROMPT;
-
- debuglogs (1, "monitor_command (args=%s)", args);
+ int resp_len;
+ char buf[1000];
if (monitor_desc == NULL)
error ("monitor target not open.");
+ p = PROMPT;
+
/* Send the command. Note that if no args were supplied, then we're
just sending the monitor a newline, which is sometimes useful. */
- printf_monitor ("%s\n", (args ? args : ""));
+ monitor_printf ("%s\r", (args ? args : ""));
+
+ resp_len = monitor_expect_prompt (buf, sizeof buf);
- expect_prompt (0);
+ fputs_unfiltered (buf, gdb_stdout); /* Output the response */
}
-/* Download a binary file by converting it to srecords. This
- will also use xmodem to download the resulting file.
-
- A download goes like this when using xmodem:
- Receiver: Sender
- NAK ---------->
- <-------- (packet) [SOH|1|1|data|SUM]
- ACK ---------->
- <-------- (packet) [SOH|2|2|data|SUM]
- ACK ---------->
- <-------- EOT
- ACK ---------->
-
- ACK = 0x06
- NAK = 0x15
- EOT = 0x04
- */
+/* Download a binary file by converting it to S records. */
static void
-monitor_load_srec (args, protocol)
+monitor_load_srec (args)
char *args;
- int protocol;
{
bfd *abfd;
asection *s;
char *buffer, srec[1024];
- char packet[XMODEM_PACKETSIZE];
int i;
- int retries;
- int type = 0; /* default to a type 0, header record */
- int srec_frame = 57; /* FIXME: this must be 57 There is 12 bytes
- of header, and 2 bytes of checksum at the end.
- The problem is an xmodem packet holds exactly
- 128 bytes. */
+ int srec_frame = 32;
+ int reclen;
+
+ buffer = alloca (srec_frame * 2 + 256);
abfd = bfd_openr (args, 0);
if (!abfd)
return;
}
- printf_monitor (LOAD_CMD); /* tell the monitor to load */
- sleep (3);
- /* get the NAK from the target */
- if (protocol == XMODEM)
- {
- if (GETNAK)
- {
- debuglogs (3, "Got the NAK to start loading");
- }
- else
- {
- printf_monitor ("%c", EOT);
- debuglogs (3, "Never got the NAK to start loading");
- error ("Never got the NAK to start loading");
- }
- }
-
- s = abfd->sections;
- while (s != (asection *) NULL)
+ monitor_printf (LOAD_CMD); /* tell the monitor to load */
+ if (current_monitor->loadresp)
+ monitor_expect (current_monitor->loadresp, NULL, 0);
+
+ for (s = abfd->sections; s; s = s->next)
{
if (s->flags & SEC_LOAD)
{
- buffer = xmalloc (srec_frame);
+ int numbytes;
+
+ printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, s->vma,
+ s->vma + s->_raw_size);
+ gdb_flush (gdb_stdout);
- printf_filtered ("%s\t: 0x%4x .. 0x%4x ",
- s->name, s->vma, s->vma + s->_raw_size);
- fflush (stdout);
- for (i = 0; i < s->_raw_size; i += srec_frame)
+ for (i = 0; i < s->_raw_size; i += numbytes)
{
- if (srec_frame > s->_raw_size - i)
- srec_frame = s->_raw_size - i;
-
- bfd_get_section_contents (abfd, s, buffer, i, srec_frame);
- monitor_make_srec (srec, type, s->vma + i, buffer, srec_frame);
- /* send a packet using xmodem */
- if (protocol == XMODEM)
- {
- make_xmodem_packet (packet, srec, XMODEM_DATASIZE);
- write_monitor (packet, XMODEM_PACKETSIZE+1);
- retries = 0;
- while (retries++ <= 3)
- {
- /* Resend packet */
- if (GETNAK)
- {
- debuglogs (3, "Got a NAK, resending packet");
- sleep (1);
- /* send it again */
- write_monitor (packet, XMODEM_PACKETSIZE+1);
- if (GETACK) /* ACKnowledged, get next data chunk */
- break;
- }
- else
- { /* assume we got an ACK */
- if (hashmark)
- {
- putc_unfiltered ('#');
- gdb_flush (gdb_stdout);
- }
- debuglogs (3, "Got an ACK, sending next packet");
- break;
- }
- }
- if (retries >= 4)
- { /* too many tries, must be hosed */
- printf_monitor ("%c", EOT);
- error ("Never got a ACK after sending an xmodem packet");
- }
- }
- else
- { /* no protocols at all */
- printf_monitor ("%s\n", srec);
- }
+ numbytes = min (srec_frame, s->_raw_size - i);
+
+ bfd_get_section_contents (abfd, s, buffer, i, numbytes);
+
+ reclen = monitor_make_srec (srec, 'd', s->vma + i, buffer, numbytes);
+
+ monitor_printf_noecho ("%.*s\r", reclen, srec);
+
if (hashmark)
{
- putc_unfiltered ('#');
+ putchar_unfiltered ('#');
gdb_flush (gdb_stdout);
}
- type = 3; /* switch to a 4 byte address record */
- fflush (gdb_stdout);
- }
- free (buffer);
- }
- else
- {
- debuglogs (3, "%s doesn't need to be loaded", s->name);
- }
- s = s->next;
+ } /* Per-packet (or S-record) loop */
+
+ putchar_unfiltered ('\n');
+ } /* Loadable sections */
}
- putc_unfiltered ('\n');
+ if (hashmark)
+ putchar_unfiltered ('\n');
/* Write a type 7 terminator record. no data for a type 7, and there
is no data, so len is 0. */
- if (protocol == XMODEM)
- {
- /* send a packet using xmodem */
- monitor_make_srec (srec, 7, abfd->start_address, "", 0);
- make_xmodem_packet (packet, srec, XMODEM_DATASIZE);
- write_monitor (packet, XMODEM_PACKETSIZE+1);
- }
- else
- {
- monitor_make_srec (srec, 7, abfd->start_address, "", 0);
- printf_monitor ("%s\n", srec);
- }
- if (protocol == XMODEM)
- {
- printf_monitor ("%c", EOT);
- if (!GETACK)
- error ("Never got ACK after sending EOT");
- }
+ reclen = monitor_make_srec (srec, 't', abfd->start_address, NULL, 0);
- if (hashmark)
- putc_unfiltered ('\n');
-
- expect_prompt ();
-}
+ monitor_printf_noecho ("%.*s\r", reclen, srec);
-/* Get an ACK or a NAK from the target. returns 1 (true) or 0 (false)
- This is for xmodem. ANy string starting with "***" is an error
- message from the target. Here's a few from the WinBond w89k
- "Cougar" PA board:
- *** Too many errors found.
- *** Bad command
- *** Command syntax error
- */
+ monitor_printf_noecho ("\r\r"); /* Some monitors need these to wake up */
-int
-getacknak (byte)
- int byte;
-{
- char character;
- int i;
-
- i = 0;
- while (i++ < 60)
- {
- character = (char) readchar (0);
- if ((character == 0xfffffffe) || (character == 0x7f))
- { /* empty uart */
- if (sr_get_debug () > 3)
- putchar ('.');
- fflush (stdout);
- sleep (1);
- continue;
- }
- if (character == CANCEL)
- { /* target aborted load */
- expect_prompt (0);
- error ("Got a CANCEL from the target.");
- }
- if (character == '*')
- { /* look for missed error message */
- expect_prompt (0);
- error ("Got an error message from the target");
- }
- debuglogs (3, "Got a %s (0x%x or \'%c\'), expecting a %s.\n",
- (character == ACK) ? "ACK"
- : (character == NAK) ? "NAK"
- : "BOGUS",
- character, character, (byte == ACK) ? "ACK" : "NAK");
- if (character == byte) /* got what we wanted */
- return 1;
- if (character == ((byte == ACK) ? NAK : ACK))
- { /* got the opposite */
- debuglogs (3, "Got the opposite, wanted 0x%x, got a 0x%x",
- byte, character);
- return 0;
- }
- sleep (1);
- }
+ monitor_expect_prompt (NULL, 0);
- return 0;
+ SERIAL_FLUSH_INPUT (monitor_desc);
}
/*
* - checksum
* is the sum of all the raw byte data in the record, from the length
* upwards, modulo 256 and subtracted from 255.
+ *
+ * This routine returns the length of the S-record.
+ *
*/
static int
unsigned char *myaddr;
int len;
{
- int checksum;
+ unsigned char checksum;
int i;
char *buf;
-
+ static char hextab[16] = "0123456789ABCDEF";
+ static char data_code_table[] = { 0,0,1,2,3};
+ static char term_code_table[] = { 0,0,9,8,7};
+ int addr_size; /* Number of bytes in the record */
+ int type_code;
buf = buffer;
- debuglogs (4, "monitor_make_srec (buffer=0x%x, type=%d, memaddr=0x%x, len=%d",
- buffer, type, memaddr, len);
- checksum = 0;
-
- /* Create the header for the srec. 4 is the number of bytes in the address,
- and 1 is the number of bytes in the count. */
-
- if (type == 0) /* FIXME: type 0 is optional */
- type = 3; /* so use data as it works */
- sprintf (buf, "S%d%02X%08X", type, len + 4 + 1, memaddr);
- buf += 12;
-
- checksum += (len + 4 + 1 /* calculate the checksum */
- + (memaddr & 0xff)
- + ((memaddr >> 8) & 0xff)
- + ((memaddr >> 16) & 0xff)
- + ((memaddr >> 24) & 0xff));
-
- /* build the srecord */
- for (i = 0; i < len; i++)
- {
- sprintf (buf, "%02X", myaddr[i]);
- checksum += myaddr[i];
- buf += 2;
- }
- sprintf(buf, "%02X", ~checksum & 0xff); /* add the checksum */
- debuglogs (3, "srec is \"%s\"", buffer);
-
- return 0;
-}
-
-/* Take 128 bytes of data and make a packet out of it.
- *
- * Each packet looks like this:
- * +-----+-------+-------+------+-----+
- * | SOH | Seq1. | Seq2. | data | SUM |
- * +-----+-------+-------+------+-----+
- * SOH = 0x01
- * Seq1 = The sequence number.
- * Seq2 = The complement of the sequence number.
- * Data = A 128 bytes of data.
- * SUM = Add the contents of the 128 bytes and use the low-order
- * 8 bits of the result.
- */
-
-static void
-make_xmodem_packet (packet, data, len)
- unsigned char *packet;
- unsigned char *data;
- int len;
-{
- static int sequence = 1;
- int i, sum;
- unsigned char *buf;
-
- buf = data;
- /* build the packet header */
- packet[0] = SOH;
- packet[1] = sequence;
- packet[2] = 255 - sequence;
- sequence++;
-#if 0
- packet[2] = ~sequence++; /* the complement is the sequence checksum */
-#endif
+ checksum = 0;
- sum = 0; /* calculate the data checksum */
- for (i = 3; i <= len + 2; i++) {
- packet[i] = *buf;
- sum += *buf;
- buf++;
- }
-
- /* add padding for the rest of the packet */
- for (i = len+1 ; i <= XMODEM_DATASIZE ; i++)
- packet[i] = '0';
-
- packet[XMODEM_PACKETSIZE] = sum & 0xff; /* add the checksum */
+ addr_size = 2;
+ if (memaddr >= 0xffffff)
+ addr_size = 4;
+ else if (memaddr >= 0xffffff)
+ addr_size = 3;
+ else
+ addr_size = 2;
- if (sr_get_debug () > 4)
+ switch (type)
{
- debuglogs (4, "The xmodem checksum is %d (0x%x)\n",
- sum & 0xff, sum & 0xff);
- print_xmodem_packet (packet);
+ case 't':
+ type_code = term_code_table[addr_size];
+ break;
+ case 'd':
+ type_code = data_code_table[addr_size];
+ break;
+ default:
+ abort();
}
-}
-
-/* Print the packet as a debug check. */
-
-static void
-print_xmodem_packet (packet)
- char *packet;
-{
- int i;
- static int lastseq;
- int sum;
+ /* Create the header for the srec. addr_size is the number of bytes in the address,
+ and 1 is the number of bytes in the count. */
- /* take apart the packet header the packet header */
- if (packet[0] == SOH)
- printf ("SOH");
- else
- error ("xmodem: SOH is wrong");
-
- /* check the sequence */
- if (packet[1] != 0)
+ switch (addr_size)
{
- lastseq = packet[1];
- if (packet[2] != ~lastseq)
- error ("xmodem: Sequence checksum is wrong");
- else
- printf_filtered (" %d %d", lastseq, ~lastseq);
+ case 4:
+ sprintf (buf, "S%d%02X%08X", type_code, len + addr_size + 1, memaddr);
+ buf += 12;
+ break;
+ case 3:
+ sprintf (buf, "S%d%02X%06X", type_code, len + addr_size + 1, memaddr);
+ buf += 10;
+ break;
+ case 2:
+ sprintf (buf, "S%d%02X%04X", type_code, len + addr_size + 1, memaddr);
+ buf += 8;
+ break;
}
-
- /* check the data checksum */
- sum = 0;
- for (i = 3; i <= XMODEM_DATASIZE; i++)
- sum += packet[i];
-
- /* ignore the data */
-#if 0
- printf (" [128 bytes of data] %d\n", sum & 0xff);
-#endif
- printf_filtered (" [%s] %d\n", packet, sum & 0xff);
-
- if ((packet[XMODEM_PACKETSIZE] & 0xff) != (sum & 0xff))
- debuglogs (4, "xmodem: data checksum wrong, got a %d",
- packet[XMODEM_PACKETSIZE] & 0xff);
-
- putchar ('\n');
-}
-
-/* Make a GDB packet. The data is always ASCII.
- * A debug packet whose contents are <data>
- * is encapsulated for transmission in the form:
- *
- * $ <data> # CSUM1 CSUM2
- *
- * <data> must be ASCII alphanumeric and cannot include characters
- * '$' or '#'. If <data> starts with two characters followed by
- * ':', then the existing stubs interpret this as a sequence number.
- *
- * CSUM1 and CSUM2 are ascii hex representation of an 8-bit
- * checksum of <data>, the most significant nibble is sent first.
- * the hex digits 0-9,a-f are used. */
-
-static void
-make_gdb_packet (buf, data)
- char *buf, *data;
-{
- int i;
- unsigned char csum = 0;
- int cnt;
- char *p;
- debuglogs (3, "make_gdb_packet(%s)\n", data);
- cnt = strlen (data);
- if (cnt > PBUFSIZ)
- error ("make_gdb_packet(): to much data\n");
-
- /* start with the packet header */
- p = buf;
- *p++ = '$';
-
- /* calculate the checksum */
- for (i = 0; i < cnt; i++)
- {
- csum += data[i];
- *p++ = data[i];
- }
+/* Note that the checksum is calculated on the raw data, not the hexified
+ data. It includes the length, address and the data portions of the
+ packet. */
- /* terminate the data with a '#' */
- *p++ = '#';
+ checksum += (len + addr_size + 1 /* Packet length */
+ + (memaddr & 0xff) /* Address... */
+ + ((memaddr >> 8) & 0xff)
+ + ((memaddr >> 16) & 0xff)
+ + ((memaddr >> 24) & 0xff));
- /* add the checksum as two ascii digits */
- *p++ = tohex ((csum >> 4) & 0xf);
- *p++ = tohex (csum & 0xf);
- *p = 0x0; /* Null terminator on string */
-}
-
-/* Send a GDB packet to the target with error handling. We get a '+'
- (ACK) back if the packet is received and the checksum
- matches. Otherwise a '-' (NAK) is returned. It returns a 1 for a
- successful transmition, or a 0 for a failure. */
-
-int
-monitor_send_packet (packet)
- char *packet;
-{
- int c, retries, i;
- char junk[PBUFSIZ];
-
- retries = 0;
-
-#if 0
- /* scan the packet to make sure it only contains valid characters.
- this may sound silly, but sometimes a garbled packet will hang
- the target board. We scan the whole thing, then print the error
- message.
- */
- for (i = 0; i < strlen(packet); i++) {
- debuglogs (5, "monitor_send_packet(): Scanning \'%c\'\n", packet[i]);
- /* legit hex numbers or command */
- if ((isxdigit(packet[i])) || (isalpha(packet[i])))
- continue;
- switch (packet[i]) {
- case '+': /* ACK */
- case '-': /* NAK */
- case '#': /* end of packet */
- case '$': /* start of packet */
- continue;
- default: /* bogus character */
- retries++;
- debuglogs (4, "monitor_send_packet(): Found a non-ascii digit \'%c\' in the packet.\n", packet[i]);
- }
- }
-#endif
-
- if (retries > 0)
- error ("Can't send packet, found %d non-ascii characters", retries);
-
- /* ok, try to send the packet */
- retries = 0;
- while (retries <= 10)
- {
- printf_monitor ("%s", packet);
-
- /* read until either a timeout occurs (-2) or '+' is read */
- while (retries <= 10)
- {
- c = readchar (timeout);
- debuglogs (3, "Reading a GDB protocol packet... Got a '%c'\n", c);
- switch (c)
- {
- case '+':
- debuglogs (3, "Got Ack\n");
- return 1;
- case SERIAL_TIMEOUT:
- debuglogs (3, "Timed out reading serial port\n");
- break; /* Retransmit buffer */
- case '-':
- debuglogs (3, "Got NAK\n");
- break; /* FIXME: (maybe) was a continue */
- case '$':
- /* It's probably an old response, or the echo of our
- command. just gobble up the packet and ignore it. */
- debuglogs (3, "Got a junk packet\n");
- do
- {
- c = readchar (timeout);
- junk[i++] = c;
- } while (c != '#');
- c = readchar (timeout);
- junk[i++] = c;
- c = readchar (timeout);
- junk[i++] = c;
- junk[i++] = '\0';
- debuglogs (3, "Reading a junk packet, got a \"%s\"\n", junk);
- continue; /* Now, go look for next packet */
- default:
- continue;
- }
- retries++;
- debuglogs (3, "Retransmitting packet \"%s\"\n", packet);
- break; /* Here to retransmit */
- }
- } /* outer while */
- return 0;
-}
-
-/* Get a GDB packet from the target. Basically we read till we see a
- '#', then check the checksum. It returns a 1 if it's gotten a
- packet, or a 0 it the packet wasn't transmitted correctly. */
-
-int
-monitor_get_packet (packet)
- char *packet;
-{
- int c;
- int retries;
- unsigned char csum;
- unsigned char pktcsum;
- char *bp;
-
- csum = 0;
- bp = packet;
-
- memset (packet, 1, PBUFSIZ);
- retries = 0;
- while (retries <= 10)
+ /* build the srecord */
+ for (i = 0; i < len; i++)
{
- do
- {
- c = readchar (timeout);
- if (c == SERIAL_TIMEOUT)
- {
- debuglogs (3, "monitor_get_packet: got time out from serial port.\n");
- }
- debuglogs (3, "Waiting for a '$', got a %c\n", c);
- } while (c != '$');
-
- retries = 0;
- while (retries <= 10)
- {
- c = readchar (timeout);
- debuglogs (3, "monitor_get_packet: got a '%c'\n", c);
- switch (c)
- {
- case SERIAL_TIMEOUT:
- debuglogs (3, "Timeout in mid-packet, retrying\n");
- return 0;
- case '$':
- debuglogs (3, "Saw new packet start in middle of old one\n");
- return 0; /* Start a new packet, count retries */
- case '#':
- *bp = '\0';
- pktcsum = from_hex (readchar (timeout)) << 4;
- pktcsum |= from_hex (readchar (timeout));
- if (csum == pktcsum)
- {
- debuglogs (3, "\nGDB packet checksum correct, packet data is \"%s\",\n", packet);
- printf_monitor ("+");
- expect_prompt (1);
- return 1;
- }
- debuglogs (3, "Bad checksum, sentsum=0x%x, csum=0x%x\n", pktcsum, csum);
- return 0;
- case '*': /* Run length encoding */
- debuglogs (5, "Run length encoding in packet\n");
- csum += c;
- c = readchar (timeout);
- csum += c;
- c = c - ' ' + 3; /* Compute repeat count */
-
- if (c > 0 && c < 255 && bp + c - 1 < packet + PBUFSIZ - 1)
- {
- memset (bp, *(bp - 1), c);
- bp += c;
- continue;
- }
- *bp = '\0';
- printf_filtered ("Repeat count %d too large for buffer.\n", c);
- return 0;
-
- default:
- if ((!isxdigit (c)) && (!ispunct (c)))
- debuglogs (4, "Got a non-ascii digit \'%c\'.\\n", c);
- if (bp < packet + PBUFSIZ - 1)
- {
- *bp++ = c;
- csum += c;
- continue;
- }
-
- *bp = '\0';
- puts_filtered ("Remote packet too long.\n");
- return 0;
- }
- }
+ *buf++ = hextab [myaddr[i] >> 4];
+ *buf++ = hextab [myaddr[i] & 0xf];
+ checksum += myaddr[i];
}
-}
-
-/* Convert an ascii number represented by 8 digits to a hex value. */
-
-static unsigned long
-ascii2hexword (mem)
- unsigned char *mem;
-{
- unsigned long val;
- int i;
- char buf[9];
- val = 0;
- for (i = 0; i < 8; i++)
- {
- val <<= 4;
- if (mem[i] >= 'A' && mem[i] <= 'F')
- val = val + mem[i] - 'A' + 10;
- if (mem[i] >= 'a' && mem[i] <= 'f')
- val = val + mem[i] - 'a' + 10;
- if (mem[i] >= '0' && mem[i] <= '9')
- val = val + mem[i] - '0';
- buf[i] = mem[i];
- }
- buf[8] = '\0';
- debuglogs (4, "ascii2hexword() got a 0x%x from %s(%x).\n", val, buf, mem);
- return val;
-}
+ checksum = ~checksum;
-/* Convert a hex value to an ascii number represented by 8 digits. */
+ *buf++ = hextab[checksum >> 4];
+ *buf++ = hextab[checksum & 0xf];
-static char *
-hexword2ascii (mem, num)
- unsigned char *mem;
- unsigned long num;
-{
- int i;
-
- debuglogs (4, "hexword2ascii() converting %x ", num);
- for (i = 7; i >= 0; i--)
- {
- mem[i] = tohex ((num >> 4) & 0xf);
- mem[i] = tohex (num & 0xf);
- num = num >> 4;
- }
- mem[8] = '\0';
- debuglogs (4, "\tto a %s", mem);
+ return buf - buffer;
}
/* Convert hex digit A to a number. */
from_hex (a)
int a;
{
- if (a == 0)
- return 0;
-
- debuglogs (4, "from_hex got a 0x%x(%c)\n",a,a);
if (a >= '0' && a <= '9')
return a - '0';
if (a >= 'a' && a <= 'f')
return a - 'a' + 10;
if (a >= 'A' && a <= 'F')
return a - 'A' + 10;
+
error ("Reply contains invalid hex digit 0x%x", a);
}
-/* Convert number NIB to a hex digit. */
+static struct target_ops monitor_ops =
+{
+ NULL, /* to_shortname */
+ NULL, /* to_longname */
+ NULL, /* to_doc */
+ NULL, /* to_open */
+ monitor_close, /* to_close */
+ NULL, /* to_attach */
+ monitor_detach, /* to_detach */
+ monitor_resume, /* to_resume */
+ monitor_wait, /* to_wait */
+ monitor_fetch_registers, /* to_fetch_registers */
+ monitor_store_registers, /* to_store_registers */
+ monitor_prepare_to_store, /* to_prepare_to_store */
+ monitor_xfer_memory, /* to_xfer_memory */
+ monitor_files_info, /* to_files_info */
+ monitor_insert_breakpoint, /* to_insert_breakpoint */
+ monitor_remove_breakpoint, /* to_remove_breakpoint */
+ 0, /* to_terminal_init */
+ 0, /* to_terminal_inferior */
+ 0, /* to_terminal_ours_for_output */
+ 0, /* to_terminal_ours */
+ 0, /* to_terminal_info */
+ monitor_kill, /* to_kill */
+ monitor_load, /* to_load */
+ 0, /* to_lookup_symbol */
+ monitor_create_inferior, /* to_create_inferior */
+ monitor_mourn_inferior, /* to_mourn_inferior */
+ 0, /* to_can_run */
+ 0, /* to_notice_signals */
+ monitor_stop, /* to_stop */
+ process_stratum, /* to_stratum */
+ 0, /* to_next */
+ 1, /* to_has_all_memory */
+ 1, /* to_has_memory */
+ 1, /* to_has_stack */
+ 1, /* to_has_registers */
+ 1, /* to_has_execution */
+ 0, /* sections */
+ 0, /* sections_end */
+ OPS_MAGIC /* to_magic */
+};
+
+/* Init the target_ops structure pointed at by OPS */
-static int
-tohex (nib)
- int nib;
+void
+init_monitor_ops (ops)
+ struct target_ops *ops;
{
- if (nib < 10)
- return '0' + nib;
- else
- return 'a' + nib - 10;
+ memcpy (ops, &monitor_ops, sizeof monitor_ops);
}
/* Define additional commands that are usually only used by monitors. */
void
_initialize_remote_monitors ()
{
- struct cmd_list_element *c;
-
- /* this sets the type of download protocol */
- c = add_set_cmd ("remoteloadprotocol", no_class, var_string, (char *)&loadproto_str,
- "Set the type of the remote load protocol.\n", &setlist);
- c->function.sfunc = set_loadproto_command;
- add_show_from_set (c, &showlist);
- loadproto_str = savestring ("none", 5);
-
- /* this sets the conversion type when loading */
- c = add_set_cmd ("remoteloadtype", no_class, var_string, (char *)&loadtype_str,
- "Set the type of the remote load protocol.\n", &setlist);
- c->function.sfunc = set_loadtype_command;
- add_show_from_set (c, &showlist);
- loadtype_str = savestring ("srec", 5);
-
add_show_from_set (add_set_cmd ("hash", no_class, var_boolean,
(char *)&hashmark,
"Set display of activity while downloading a file.\n\
-When enabled, a period \'.\' is displayed.",
+When enabled, a hashmark \'#\' is displayed.",
&setlist),
&showlist);