/* Remote debugging interface for boot monitors, for GDB.
- Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2006, 2007, 2008, 2009, 2010, 2011
- Free Software Foundation, Inc.
+ Copyright (C) 1990-2014 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
Resurrected from the ashes by Stu Grossman.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
-/* This file was derived from various remote-* modules. It is a collection
+/* This file was derived from various remote-* modules. It is a collection
of generic support functions so GDB can talk directly to a ROM based
- monitor. This saves use from having to hack an exception based handler
+ monitor. This saves use from having to hack an exception based handler
into existence, and makes for quick porting.
This module talks to a debug monitor called 'MONITOR', which
#include "exceptions.h"
#include <signal.h>
#include <ctype.h>
-#include "gdb_string.h"
+#include <string.h>
#include <sys/types.h>
#include "command.h"
#include "serial.h"
#include "srec.h"
#include "regcache.h"
#include "gdbthread.h"
+#include "readline/readline.h"
static char *dev_name;
static struct target_ops *targ_ops;
static struct monitor_ops *current_monitor;
-static int hashmark; /* flag set by "set hash" */
+static int hashmark; /* flag set by "set hash". */
static int timeout = 30;
-static int in_monitor_wait = 0; /* Non-zero means we are in monitor_wait() */
+static int in_monitor_wait = 0; /* Non-zero means we are in monitor_wait(). */
-static void (*ofunc) (); /* Old SIGINT signal handler */
+static void (*ofunc) (); /* Old SIGINT signal handler. */
static CORE_ADDR *breakaddr;
static struct serial *monitor_desc = NULL;
-/* Pointer to regexp pattern matching data */
+/* Pointer to regexp pattern matching data. */
static struct re_pattern_buffer register_pattern;
static char register_fastmap[256];
static int first_time = 0; /* Is this the first time we're
executing after gaving created the
- child proccess? */
+ child proccess? */
/* This is the ptid we use while we're connected to a monitor. Its
#define TARGET_BUF_SIZE 2048
/* Monitor specific debugging information. Typically only useful to
- the developer of a new monitor interface. */
+ the developer of a new monitor interface. */
static void monitor_debug (const char *fmt, ...) ATTRIBUTE_PRINTF (1, 2);
-static int monitor_debug_p = 0;
+static unsigned int monitor_debug_p = 0;
/* NOTE: This file alternates between monitor_debug_p and remote_debug
when determining if debug information is printed. Perhaps this
- could be simplified. */
+ could be simplified. */
static void
monitor_debug (const char *fmt, ...)
/* Convert a string into a printable representation, Return # byte in
the new string. When LEN is >0 it specifies the size of the
- string. Otherwize strlen(oldstr) is used. */
+ string. Otherwize strlen(oldstr) is used. */
static void
monitor_printable_string (char *newstr, char *oldstr, int len)
if (final_char)
error (_("%s (%s): %s: %s%c"),
- function, paddress (target_gdbarch, memaddr),
+ function, paddress (target_gdbarch (), memaddr),
message, safe_string, final_char);
else
error (_("%s (%s): %s: %s"),
- function, paddress (target_gdbarch, memaddr),
+ function, paddress (target_gdbarch (), memaddr),
message, safe_string);
}
If it is a '%s' format, the argument is a string; otherwise the
argument is assumed to be a long integer.
- %% is also turned into a single %.
- */
+ %% is also turned into a single %. */
static void
monitor_vsprintf (char *sndbuf, char *pattern, va_list args)
{
- int addr_bit = gdbarch_addr_bit (target_gdbarch);
+ int addr_bit = gdbarch_addr_bit (target_gdbarch ());
char format[10];
char fmt;
char *p;
{
c &= 0x7f;
/* This seems to interfere with proper function of the
- input stream */
+ input stream. */
if (monitor_debug_p || remote_debug)
{
char buf[2];
}
- /* Canonicialize \n\r combinations into one \r */
+ /* Canonicialize \n\r combinations into one \r. */
if ((current_monitor->flags & MO_HANDLE_NL) != 0)
{
if ((c == '\r' && state == last_nl)
if (c == SERIAL_TIMEOUT)
#if 0
- /* I fail to see how detaching here can be useful */
- if (in_monitor_wait) /* Watchdog went off */
+ /* I fail to see how detaching here can be useful. */
+ if (in_monitor_wait) /* Watchdog went off. */
{
target_mourn_inferior ();
error (_("GDB serial timeout has expired. Target detached."));
}
immediate_quit++;
+ QUIT;
while (1)
{
if (buf)
else
c = readchar (timeout);
- /* Don't expect any ^C sent to be echoed */
+ /* Don't expect any ^C sent to be echoed. */
if (*p == '\003' || c == *p)
{
p, since we know no prefix can be longer than that.
Note that we can use STRING itself, along with C, as a record
- of what we've received so far. :) */
+ of what we've received so far. :) */
int i;
for (i = (p - string) - 1; i >= 0; i--)
{
/* Is this prefix a suffix of what we've read so far?
In other words, does
- string[0 .. i-1] == string[p - i, p - 1]? */
+ string[0 .. i-1] == string[p - i, p - 1]? */
if (! memcmp (string, p - i, i))
{
p = string + i + 1;
int retval;
if (p - mybuf >= buflen)
- { /* Buffer about to overflow */
+ { /* Buffer about to overflow. */
/* On overflow, we copy the upper half of the buffer to the lower half. Not
- great, but it usually works... */
+ great, but it usually works... */
memcpy (mybuf, mybuf + buflen / 2, buflen / 2);
p = mybuf + buflen / 2;
re_compile_fastmap (compiled_pattern);
}
-/* Open a connection to a remote debugger. NAME is the filename used
+/* Open a connection to a remote debugger. NAME is the filename used
for communication. */
void
target_preopen (from_tty);
- /* Setup pattern for register dump */
+ /* Setup pattern for register dump. */
if (mon_ops->register_pattern)
compile_pattern (mon_ops->register_pattern, ®ister_pattern,
serial_flush_input (monitor_desc);
- /* some systems only work with 2 stop bits */
+ /* some systems only work with 2 stop bits. */
serial_setstopbits (monitor_desc, mon_ops->stopbits);
}
}
- /* wake up the monitor and see if it's alive */
+ /* wake up the monitor and see if it's alive. */
for (p = mon_ops->init; *p != NULL; p++)
{
/* Some of the characters we send may not be echoed,
- but we hope to get a prompt at the end of it all. */
+ but we hope to get a prompt at the end of it all. */
if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0)
monitor_printf (*p);
memset (breakaddr, 0, mon_ops->num_breakpoints * sizeof (CORE_ADDR));
}
- /* Remove all breakpoints */
+ /* Remove all breakpoints. */
if (mon_ops->clr_all_break)
{
inferior_appeared (inf, ptid_get_pid (inferior_ptid));
add_thread_silent (inferior_ptid);
- /* Give monitor_wait something to read */
+ /* Give monitor_wait something to read. */
monitor_printf (current_monitor->line_term);
+ init_wait_for_inferior ();
+
start_remote (from_tty);
}
control. */
void
-monitor_close (int quitting)
+monitor_close (void)
{
if (monitor_desc)
serial_close (monitor_desc);
- /* Free breakpoint memory */
+ /* Free breakpoint memory. */
if (breakaddr != NULL)
{
xfree (breakaddr);
when you want to detach and do something else with your gdb. */
static void
-monitor_detach (struct target_ops *ops, char *args, int from_tty)
+monitor_detach (struct target_ops *ops, const char *args, int from_tty)
{
- pop_target (); /* calls monitor_close to do the real work */
+ unpush_target (ops); /* calls monitor_close to do the real work. */
if (from_tty)
printf_unfiltered (_("Ending remote %s debugging\n"), target_shortname);
}
error (_("monitor_supply_register (%d): bad value from monitor: %s."),
regno, valstr);
- /* supply register stores in target byte order, so swap here */
+ /* supply register stores in target byte order, so swap here. */
store_unsigned_integer (regbuf, register_size (gdbarch, regno), byte_order,
val);
static void
monitor_resume (struct target_ops *ops,
- ptid_t ptid, int step, enum target_signal sig)
+ ptid_t ptid, int step, enum gdb_signal sig)
{
- /* Some monitors require a different command when starting a program */
+ /* Some monitors require a different command when starting a program. */
monitor_debug ("MON resume\n");
if (current_monitor->flags & MO_RUN_FIRST_TIME && first_time == 1)
{
Give up (and stop debugging it)? ")))
{
target_mourn_inferior ();
- deprecated_throw_reason (RETURN_QUIT);
+ quit ();
}
target_terminal_inferior ();
while (resp_len < 0);
/* Print any output characters that were preceded by ^O. */
- /* FIXME - This would be great as a user settabgle flag */
+ /* FIXME - This would be great as a user settabgle flag. */
if (monitor_debug_p || remote_debug
|| current_monitor->flags & MO_PRINT_PROGRAM_OUTPUT)
{
monitor_debug ("MON wait\n");
#if 0
- /* This is somthing other than a maintenance command */
+ /* This is somthing other than a maintenance command. */
in_monitor_wait = 1;
timeout = watchdog > 0 ? watchdog : -1;
#else
- timeout = -1; /* Don't time out -- user program is running. */
+ timeout = -1; /* Don't time out -- user program is running. */
#endif
ofunc = (void (*)()) signal (SIGINT, monitor_interrupt);
else
monitor_wait_filter (buf, sizeof (buf), &resp_len, status);
-#if 0 /* Transferred to monitor wait filter */
+#if 0 /* Transferred to monitor wait filter. */
do
{
resp_len = monitor_expect_prompt (buf, sizeof (buf));
while (resp_len < 0);
/* Print any output characters that were preceded by ^O. */
- /* FIXME - This would be great as a user settabgle flag */
+ /* FIXME - This would be great as a user settabgle flag. */
if (monitor_debug_p || remote_debug
|| current_monitor->flags & MO_PRINT_PROGRAM_OUTPUT)
{
#endif
status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = TARGET_SIGNAL_TRAP;
+ status->value.sig = GDB_SIGNAL_TRAP;
discard_cleanups (old_chain);
return inferior_ptid;
}
-/* Fetch register REGNO, or all registers if REGNO is -1. Returns
+/* Fetch register REGNO, or all registers if REGNO is -1. Returns
errno value. */
static void
return;
}
- /* send the register examine command */
+ /* Send the register examine command. */
monitor_printf (current_monitor->getreg.cmd, name);
}
}
- /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set */
+ /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set. */
if (current_monitor->flags & MO_HEX_PREFIX)
{
int c;
regbuf[i] = c;
}
- regbuf[i] = '\000'; /* terminate the number */
+ regbuf[i] = '\000'; /* Terminate the number. */
monitor_debug ("REGVAL '%s'\n", regbuf);
/* If TERM is present, we wait for that to show up. Also, (if TERM
if (current_monitor->getreg.term)
{
monitor_debug ("EXP getreg.term\n");
- monitor_expect (current_monitor->getreg.term, NULL, 0); /* get
- response */
+ monitor_expect (current_monitor->getreg.term, NULL, 0); /* Get
+ response. */
}
if (current_monitor->getreg.term_cmd)
monitor_printf (current_monitor->getreg.term_cmd);
}
if (!current_monitor->getreg.term || /* Already expected or */
- current_monitor->getreg.term_cmd) /* ack expected */
- monitor_expect_prompt (NULL, 0); /* get response */
+ current_monitor->getreg.term_cmd) /* ack expected. */
+ monitor_expect_prompt (NULL, 0); /* Get response. */
monitor_supply_register (regcache, regno, regbuf);
}
-/* Sometimes, it takes several commands to dump the registers */
+/* Sometimes, it takes several commands to dump the registers. */
/* This is a primitive for use by variations of monitor interfaces in
- case they need to compose the operation.
- */
+ case they need to compose the operation. */
+
int
monitor_dump_reg_block (struct regcache *regcache, char *block_cmd)
{
/* Read the remote registers into the block regs. */
-/* Call the specific function if it has been provided */
+/* Call the specific function if it has been provided. */
static void
monitor_dump_regs (struct regcache *regcache)
int resp_len;
if (current_monitor->dumpregs)
- (*(current_monitor->dumpregs)) (regcache); /* call supplied function */
- else if (current_monitor->dump_registers) /* default version */
+ (*(current_monitor->dumpregs)) (regcache); /* Call supplied function. */
+ else if (current_monitor->dump_registers) /* Default version. */
{
monitor_printf (current_monitor->dump_registers);
resp_len = monitor_expect_prompt (buf, sizeof (buf));
parse_register_dump (regcache, buf, resp_len);
}
else
- /* Need some way to read registers */
+ /* Need some way to read registers. */
internal_error (__FILE__, __LINE__,
_("failed internal consistency check"));
}
regcache_cooked_read_unsigned (regcache, regno, &val);
monitor_debug ("MON storeg %d %s\n", regno, phex (val, reg_size));
- /* send the register deposit command */
+ /* Send the register deposit command. */
if (current_monitor->flags & MO_REGISTER_VALUE_FIRST)
monitor_printf (current_monitor->setreg.cmd, val, name);
}
else
monitor_expect_prompt (NULL, 0);
- if (current_monitor->setreg.term_cmd) /* Mode exit required */
+ if (current_monitor->setreg.term_cmd) /* Mode exit required. */
{
monitor_debug ("EXP setreg_termcmd\n");
monitor_printf ("%s", current_monitor->setreg.term_cmd);
debugged. */
static void
-monitor_prepare_to_store (struct regcache *regcache)
+monitor_prepare_to_store (struct target_ops *self, struct regcache *regcache)
{
- /* Do nothing, since we can store individual regs */
+ /* Do nothing, since we can store individual regs. */
}
static void
}
static int
-monitor_write_memory (CORE_ADDR memaddr, char *myaddr, int len)
+monitor_write_memory (CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
{
- enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
unsigned int val, hostval;
char *cmd;
int i;
- monitor_debug ("MON write %d %s\n", len, paddress (target_gdbarch, memaddr));
+ monitor_debug ("MON write %d %s\n", len, paddress (target_gdbarch (), memaddr));
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- memaddr = gdbarch_addr_bits_remove (target_gdbarch, memaddr);
+ memaddr = gdbarch_addr_bits_remove (target_gdbarch (), memaddr);
/* Use memory fill command for leading 0 bytes. */
if (myaddr[i] != 0)
break;
- if (i > 4) /* More than 4 zeros is worth doing */
+ if (i > 4) /* More than 4 zeros is worth doing. */
{
monitor_debug ("MON FILL %d\n", i);
if (current_monitor->flags & MO_FILL_USES_ADDR)
monitor_printf ("%x\r", val);
}
if (current_monitor->setmem.term_cmd)
- { /* Emit this to get out of the memory editing state */
+ { /* Emit this to get out of the memory editing state. */
monitor_printf ("%s", current_monitor->setmem.term_cmd);
- /* Drop through to expecting a prompt */
+ /* Drop through to expecting a prompt. */
}
}
else
static int
-monitor_write_memory_bytes (CORE_ADDR memaddr, char *myaddr, int len)
+monitor_write_memory_bytes (CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
{
unsigned char val;
int written = 0;
if (len == 0)
return 0;
- /* Enter the sub mode */
+ /* Enter the sub mode. */
monitor_printf (current_monitor->setmem.cmdb, memaddr);
monitor_expect_prompt (NULL, 0);
while (len)
myaddr++;
memaddr++;
written++;
- /* If we wanted to, here we could validate the address */
+ /* If we wanted to, here we could validate the address. */
monitor_expect_prompt (NULL, 0);
len--;
}
- /* Now exit the sub mode */
+ /* Now exit the sub mode. */
monitor_printf (current_monitor->getreg.term_cmd);
monitor_expect_prompt (NULL, 0);
return written;
i++, j--;
}
}
-/* Format 32 chars of long long value, advance the pointer */
+/* Format 32 chars of long long value, advance the pointer. */
static char *hexlate = "0123456789abcdef";
static char *
longlong_hexchars (unsigned long long value,
dp = (unsigned long long *) scan;
*dp = value;
}
- longlongendswap (disbuf); /* FIXME: ONly on big endian hosts */
+ longlongendswap (disbuf); /* FIXME: ONly on big endian hosts. */
while (scan < limit)
{
- c = *scan++; /* a byte of our long long value */
+ c = *scan++; /* A byte of our long long value. */
if (leadzero)
{
if (c == 0)
continue;
else
- leadzero = 0; /* henceforth we print even zeroes */
+ leadzero = 0; /* Henceforth we print even zeroes. */
}
nib = c >> 4; /* high nibble bits */
*outbuff++ = hexlate[nib];
/* I am only going to call this when writing virtual byte streams.
- Which possably entails endian conversions
- */
+ Which possably entails endian conversions. */
+
static int
-monitor_write_memory_longlongs (CORE_ADDR memaddr, char *myaddr, int len)
+monitor_write_memory_longlongs (CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
{
- static char hexstage[20]; /* At least 16 digits required, plus null */
+ static char hexstage[20]; /* At least 16 digits required, plus null. */
char *endstring;
long long *llptr;
long long value;
int written = 0;
- llptr = (unsigned long long *) myaddr;
+ llptr = (long long *) myaddr;
if (len == 0)
return 0;
monitor_printf (current_monitor->setmem.cmdll, memaddr);
{
value = *llptr;
endstring = longlong_hexchars (*llptr, hexstage);
- *endstring = '\0'; /* NUll terminate for printf */
+ *endstring = '\0'; /* NUll terminate for printf. */
monitor_printf ("%s\r", hexstage);
llptr++;
memaddr += 8;
written += 8;
- /* If we wanted to, here we could validate the address */
+ /* If we wanted to, here we could validate the address. */
monitor_expect_prompt (NULL, 0);
len -= 8;
}
- /* Now exit the sub mode */
+ /* Now exit the sub mode. */
monitor_printf (current_monitor->getreg.term_cmd);
monitor_expect_prompt (NULL, 0);
return written;
MO_SETMEM_INTERACTIVE
! MO_NO_ECHO_ON_SETMEM
To use this, the you have to patch the monitor_cmds block with
- this function. Otherwise, its not tuned up for use by all
- monitor variations.
- */
+ this function. Otherwise, its not tuned up for use by all
+ monitor variations. */
static int
-monitor_write_memory_block (CORE_ADDR memaddr, char *myaddr, int len)
+monitor_write_memory_block (CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
{
int written;
written = 0;
- /* FIXME: This would be a good place to put the zero test */
+ /* FIXME: This would be a good place to put the zero test. */
#if 1
if ((len > 8) && (((len & 0x07)) == 0) && current_monitor->setmem.cmdll)
{
which can only read a single byte/word/etc. at a time. */
static int
-monitor_read_memory_single (CORE_ADDR memaddr, char *myaddr, int len)
+monitor_read_memory_single (CORE_ADDR memaddr, gdb_byte *myaddr, int len)
{
- enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
unsigned int val;
char membuf[sizeof (int) * 2 + 1];
char *p;
/* Now, read the appropriate number of hex digits for this loc,
skipping spaces. */
- /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set. */
+ /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set. */
if (current_monitor->flags & MO_HEX_PREFIX)
{
int c;
}
membuf[i] = c;
}
- membuf[i] = '\000'; /* terminate the number */
+ membuf[i] = '\000'; /* Terminate the number. */
}
/* If TERM is present, we wait for that to show up. Also, (if TERM is
if (current_monitor->getmem.term)
{
- monitor_expect (current_monitor->getmem.term, NULL, 0); /* get
- response */
+ monitor_expect (current_monitor->getmem.term, NULL, 0); /* Get
+ response. */
if (current_monitor->getmem.term_cmd)
{
}
}
else
- monitor_expect_prompt (NULL, 0); /* get response */
+ monitor_expect_prompt (NULL, 0); /* Get response. */
p = membuf;
val = strtoul (membuf, &p, 16);
"bad value from monitor",
memaddr, 0, membuf, 0);
- /* supply register stores in target byte order, so swap here */
+ /* supply register stores in target byte order, so swap here. */
store_unsigned_integer (myaddr, len, byte_order, val);
than 16 bytes at a time. */
static int
-monitor_read_memory (CORE_ADDR memaddr, char *myaddr, int len)
+monitor_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len)
{
unsigned int val;
char buf[512];
}
monitor_debug ("MON read block ta(%s) ha(%s) %d\n",
- paddress (target_gdbarch, memaddr),
+ paddress (target_gdbarch (), memaddr),
host_address_to_string (myaddr), len);
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- memaddr = gdbarch_addr_bits_remove (target_gdbarch, memaddr);
+ memaddr = gdbarch_addr_bits_remove (target_gdbarch (), memaddr);
if (current_monitor->flags & MO_GETMEM_READ_SINGLE)
return monitor_read_memory_single (memaddr, myaddr, len);
len = min (len, 16);
- /* Some dumpers align the first data with the preceeding 16
- byte boundary. Some print blanks and start at the
- requested boundary. EXACT_DUMPADDR
- */
+ /* Some dumpers align the first data with the preceding 16
+ byte boundary. Some print blanks and start at the
+ requested boundary. EXACT_DUMPADDR */
dumpaddr = (current_monitor->flags & MO_EXACT_DUMPADDR)
? memaddr : memaddr & ~0x0f;
if (((memaddr ^ (memaddr + len - 1)) & ~0xf) != 0)
len = ((memaddr + len) & ~0xf) - memaddr;
- /* send the memory examine command */
+ /* Send the memory examine command. */
if (current_monitor->flags & MO_GETMEM_NEEDS_RANGE)
monitor_printf (current_monitor->getmem.cmdb, memaddr, memaddr + len);
if (current_monitor->getmem.term)
{
resp_len = monitor_expect (current_monitor->getmem.term,
- buf, sizeof buf); /* get response */
+ buf, sizeof buf); /* Get response. */
if (resp_len <= 0)
monitor_error ("monitor_read_memory",
}
}
else
- resp_len = monitor_expect_prompt (buf, sizeof buf); /* get response */
+ resp_len = monitor_expect_prompt (buf, sizeof buf); /* Get response. */
p = buf;
++dumpaddr;
++p;
}
- ++p; /* skip a blank or other non hex char */
+ ++p; /* Skip a blank or other non hex char. */
c = *p;
}
if (fetched == 0)
error (_("Failed to read via monitor"));
if (monitor_debug_p || remote_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
- return fetched; /* Return the number of bytes actually read */
+ return fetched; /* Return the number of bytes actually
+ read. */
}
monitor_debug ("MON scanning bytes\n");
for (i = len; i > 0; i--)
{
- /* Skip non-hex chars, but bomb on end of string and newlines */
+ /* Skip non-hex chars, but bomb on end of string and newlines. */
while (1)
{
return len;
}
-/* Transfer LEN bytes between target address MEMADDR and GDB address
- MYADDR. Returns 0 for success, errno code for failure. TARGET is
- unused. */
+/* Helper for monitor_xfer_partial that handles memory transfers.
+ Arguments are like target_xfer_partial. */
-static int
-monitor_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int write,
- struct mem_attrib *attrib, struct target_ops *target)
+static LONGEST
+monitor_xfer_memory (gdb_byte *readbuf, const gdb_byte *writebuf,
+ ULONGEST memaddr, ULONGEST len)
{
int res;
- if (write)
+ if (writebuf != NULL)
{
if (current_monitor->flags & MO_HAS_BLOCKWRITES)
- res = monitor_write_memory_block(memaddr, myaddr, len);
+ res = monitor_write_memory_block (memaddr, writebuf, len);
else
- res = monitor_write_memory(memaddr, myaddr, len);
+ res = monitor_write_memory (memaddr, writebuf, len);
}
else
{
- res = monitor_read_memory(memaddr, myaddr, len);
+ res = monitor_read_memory (memaddr, readbuf, len);
}
+ if (res == 0)
+ return TARGET_XFER_E_IO;
return res;
}
+/* Target to_xfer_partial implementation. */
+
+static LONGEST
+monitor_xfer_partial (struct target_ops *ops, enum target_object object,
+ const char *annex, gdb_byte *readbuf,
+ const gdb_byte *writebuf, ULONGEST offset, ULONGEST len)
+{
+ switch (object)
+ {
+ case TARGET_OBJECT_MEMORY:
+ return monitor_xfer_memory (readbuf, writebuf, offset, len);
+
+ default:
+ return TARGET_XFER_E_IO;
+ }
+}
+
static void
monitor_kill (struct target_ops *ops)
{
- return; /* ignore attempts to kill target system */
+ return; /* Ignore attempts to kill target system. */
}
/* All we actually do is set the PC to the start address of exec_bfd. */
monitor_mourn_inferior (struct target_ops *ops)
{
unpush_target (targ_ops);
- generic_mourn_inferior (); /* Do all the proper things now */
+ generic_mourn_inferior (); /* Do all the proper things now. */
delete_thread_silent (monitor_ptid);
}
/* Tell the monitor to add a breakpoint. */
static int
-monitor_insert_breakpoint (struct gdbarch *gdbarch,
+monitor_insert_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch,
struct bp_target_info *bp_tgt)
{
CORE_ADDR addr = bp_tgt->placed_address;
/* Tell the monitor to remove a breakpoint. */
static int
-monitor_remove_breakpoint (struct gdbarch *gdbarch,
+monitor_remove_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch,
struct bp_target_info *bp_tgt)
{
CORE_ADDR addr = bp_tgt->placed_address;
if (breakaddr[i] == addr)
{
breakaddr[i] = 0;
- /* some monitors remove breakpoints based on the address */
+ /* Some monitors remove breakpoints based on the address. */
if (current_monitor->flags & MO_CLR_BREAK_USES_ADDR)
monitor_printf (current_monitor->clr_break, addr);
else if (current_monitor->flags & MO_CLR_BREAK_1_BASED)
return 1;
}
-/* monitor_load -- download a file. */
+/* monitor_load -- download a file. */
static void
-monitor_load (char *file, int from_tty)
+monitor_load (char *args, int from_tty)
{
+ CORE_ADDR load_offset = 0;
+ char **argv;
+ struct cleanup *old_cleanups;
+ char *filename;
+
monitor_debug ("MON load\n");
- if (current_monitor->load_routine)
- current_monitor->load_routine (monitor_desc, file, hashmark);
- else
- { /* The default is ascii S-records */
- int n;
- unsigned long load_offset;
- char buf[128];
-
- /* enable user to specify address for downloading as 2nd arg to load */
- n = sscanf (file, "%s 0x%lx", buf, &load_offset);
- if (n > 1)
- file = buf;
- else
- load_offset = 0;
+ if (args == NULL)
+ error_no_arg (_("file to load"));
- monitor_printf (current_monitor->load);
- if (current_monitor->loadresp)
- monitor_expect (current_monitor->loadresp, NULL, 0);
+ argv = gdb_buildargv (args);
+ old_cleanups = make_cleanup_freeargv (argv);
- load_srec (monitor_desc, file, (bfd_vma) load_offset,
- 32, SREC_ALL, hashmark,
- current_monitor->flags & MO_SREC_ACK ?
- monitor_wait_srec_ack : NULL);
+ filename = tilde_expand (argv[0]);
+ make_cleanup (xfree, filename);
- monitor_expect_prompt (NULL, 0);
+ /* Enable user to specify address for downloading as 2nd arg to load. */
+ if (argv[1] != NULL)
+ {
+ const char *endptr;
+
+ load_offset = strtoulst (argv[1], &endptr, 0);
+
+ /* If the last word was not a valid number then
+ treat it as a file name with spaces in. */
+ if (argv[1] == endptr)
+ error (_("Invalid download offset:%s."), argv[1]);
+
+ if (argv[2] != NULL)
+ error (_("Too many parameters."));
}
- /* Finally, make the PC point at the start address */
+ monitor_printf (current_monitor->load);
+ if (current_monitor->loadresp)
+ monitor_expect (current_monitor->loadresp, NULL, 0);
+
+ load_srec (monitor_desc, filename, load_offset,
+ 32, SREC_ALL, hashmark,
+ current_monitor->flags & MO_SREC_ACK ?
+ monitor_wait_srec_ack : NULL);
+
+ monitor_expect_prompt (NULL, 0);
+
+ do_cleanups (old_cleanups);
+
+ /* Finally, make the PC point at the start address. */
if (exec_bfd)
regcache_write_pc (get_current_regcache (),
bfd_get_start_address (exec_bfd));
}
/* Put a COMMAND string out to MONITOR. Output from MONITOR is placed
- in OUTPUT until the prompt is seen. FIXME: We read the characters
+ in OUTPUT until the prompt is seen. FIXME: We read the characters
ourseleves here cause of a nasty echo. */
static void
resp_len = monitor_expect_prompt (buf, sizeof buf);
- fputs_unfiltered (buf, outbuf); /* Output the response */
+ fputs_unfiltered (buf, outbuf); /* Output the response. */
}
/* Convert hex digit A to a number. */
monitor_ops.to_fetch_registers = monitor_fetch_registers;
monitor_ops.to_store_registers = monitor_store_registers;
monitor_ops.to_prepare_to_store = monitor_prepare_to_store;
- monitor_ops.deprecated_xfer_memory = monitor_xfer_memory;
+ monitor_ops.to_xfer_partial = monitor_xfer_partial;
monitor_ops.to_files_info = monitor_files_info;
monitor_ops.to_insert_breakpoint = monitor_insert_breakpoint;
monitor_ops.to_remove_breakpoint = monitor_remove_breakpoint;
monitor_ops.to_magic = OPS_MAGIC;
} /* init_base_monitor_ops */
-/* Init the target_ops structure pointed at by OPS */
+/* Init the target_ops structure pointed at by OPS. */
void
init_monitor_ops (struct target_ops *ops)
NULL, /* FIXME: i18n: */
&setlist, &showlist);
- add_setshow_zinteger_cmd ("monitor", no_class, &monitor_debug_p, _("\
+ add_setshow_zuinteger_cmd ("monitor", no_class, &monitor_debug_p, _("\
Set debugging of remote monitor communication."), _("\
Show debugging of remote monitor communication."), _("\
When enabled, communication between GDB and the remote monitor\n\
is displayed."),
- NULL,
- NULL, /* FIXME: i18n: */
- &setdebuglist, &showdebuglist);
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setdebuglist, &showdebuglist);
/* Yes, 42000 is arbitrary. The only sense out of it, is that it
isn't 0. */