/* Remote debugging interface for boot monitors, for GDB.
Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2006, 2007 Free Software Foundation, Inc.
+ 2000, 2001, 2002, 2006, 2007, 2008 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
Resurrected from the ashes by Stu Grossman.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* This file was derived from various remote-* modules. It is a collection
of generic support functions so GDB can talk directly to a ROM based
#include "gdb_regex.h"
#include "srec.h"
#include "regcache.h"
+#include "gdbthread.h"
static char *dev_name;
static struct target_ops *targ_ops;
static void monitor_interrupt_query (void);
static void monitor_interrupt_twice (int);
-static void monitor_stop (void);
-static void monitor_dump_regs (void);
+static void monitor_stop (ptid_t);
+static void monitor_dump_regs (struct regcache *regcache);
#if 0
static int from_hex (int a);
static int first_time = 0; /* is this the first time we're executing after
gaving created the child proccess? */
+
+/* This is the ptid we use while we're connected to a monitor. Its
+ value is arbitrary, as monitor targets don't have a notion of
+ processes or threads, but we need something non-null to place in
+ inferior_ptid. */
+static ptid_t monitor_ptid;
+
#define TARGET_BUF_SIZE 2048
/* Monitor specific debugging information. Typically only useful to
if (current_monitor->stop)
{
- monitor_stop ();
+ monitor_stop (inferior_ptid);
if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0)
{
monitor_debug ("EXP Open echo\n");
push_target (targ_ops);
- inferior_ptid = pid_to_ptid (42000); /* Make run command think we are busy... */
+ /* Start afresh. */
+ init_thread_list ();
+
+ /* Make run command think we are busy... */
+ inferior_ptid = monitor_ptid;
+ add_inferior_silent (ptid_get_pid (inferior_ptid));
+ add_thread_silent (inferior_ptid);
/* Give monitor_wait something to read */
}
monitor_desc = NULL;
+
+ delete_thread_silent (monitor_ptid);
+ delete_inferior_silent (ptid_get_pid (monitor_ptid));
}
/* Terminate the open connection to the remote debugger. Use this
when you want to detach and do something else with your gdb. */
static void
-monitor_detach (char *args, int from_tty)
+monitor_detach (struct target_ops *ops, char *args, int from_tty)
{
pop_target (); /* calls monitor_close to do the real work */
if (from_tty)
/* Convert VALSTR into the target byte-ordered value of REGNO and store it. */
char *
-monitor_supply_register (int regno, char *valstr)
+monitor_supply_register (struct regcache *regcache, int regno, char *valstr)
{
ULONGEST val;
unsigned char regbuf[MAX_REGISTER_SIZE];
/* supply register stores in target byte order, so swap here */
- store_unsigned_integer (regbuf, register_size (current_gdbarch, regno), val);
+ store_unsigned_integer (regbuf,
+ register_size (get_regcache_arch (regcache), regno),
+ val);
- regcache_raw_supply (current_regcache, regno, regbuf);
+ regcache_raw_supply (regcache, regno, regbuf);
return p;
}
string which are passed down to monitor specific code. */
static void
-parse_register_dump (char *buf, int len)
+parse_register_dump (struct regcache *regcache, char *buf, int len)
{
monitor_debug ("MON Parsing register dump\n");
while (1)
vallen = register_strings.end[2] - register_strings.start[2];
val = buf + register_strings.start[2];
- current_monitor->supply_register (regname, regnamelen, val, vallen);
+ current_monitor->supply_register (regcache, regname, regnamelen,
+ val, vallen);
buf += register_strings.end[0];
len -= register_strings.end[0];
if (monitor_debug_p || remote_debug)
fprintf_unfiltered (gdb_stdlog, "monitor_interrupt called\n");
- target_stop ();
+ target_stop (inferior_ptid);
}
/* The user typed ^C twice. */
}
if (current_monitor->register_pattern)
- parse_register_dump (buf, resp_len);
+ parse_register_dump (get_current_regcache (), buf, resp_len);
#else
monitor_debug ("Wait fetching registers after stop\n");
- monitor_dump_regs ();
+ monitor_dump_regs (get_current_regcache ());
#endif
status->kind = TARGET_WAITKIND_STOPPED;
errno value. */
static void
-monitor_fetch_register (int regno)
+monitor_fetch_register (struct regcache *regcache, int regno)
{
const char *name;
char *zerobuf;
if (!name || (*name == '\0'))
{
monitor_debug ("No register known for %d\n", regno);
- regcache_raw_supply (current_regcache, regno, zerobuf);
+ regcache_raw_supply (regcache, regno, zerobuf);
return;
}
spaces, but stop reading if something else is seen. Some monitors
like to drop leading zeros. */
- for (i = 0; i < register_size (current_gdbarch, regno) * 2; i++)
+ for (i = 0; i < register_size (get_regcache_arch (regcache), regno) * 2; i++)
{
int c;
c = readchar (timeout);
current_monitor->getreg.term_cmd) /* ack expected */
monitor_expect_prompt (NULL, 0); /* get response */
- monitor_supply_register (regno, regbuf);
+ monitor_supply_register (regcache, regno, regbuf);
}
/* Sometimes, it takes several commands to dump the registers */
case they need to compose the operation.
*/
int
-monitor_dump_reg_block (char *block_cmd)
+monitor_dump_reg_block (struct regcache *regcache, char *block_cmd)
{
char buf[TARGET_BUF_SIZE];
int resp_len;
monitor_printf (block_cmd);
resp_len = monitor_expect_prompt (buf, sizeof (buf));
- parse_register_dump (buf, resp_len);
+ parse_register_dump (regcache, buf, resp_len);
return 1;
}
/* Call the specific function if it has been provided */
static void
-monitor_dump_regs (void)
+monitor_dump_regs (struct regcache *regcache)
{
char buf[TARGET_BUF_SIZE];
int resp_len;
if (current_monitor->dumpregs)
- (*(current_monitor->dumpregs)) (); /* call supplied function */
+ (*(current_monitor->dumpregs)) (regcache); /* call supplied function */
else if (current_monitor->dump_registers) /* default version */
{
monitor_printf (current_monitor->dump_registers);
resp_len = monitor_expect_prompt (buf, sizeof (buf));
- parse_register_dump (buf, resp_len);
+ parse_register_dump (regcache, buf, resp_len);
}
else
internal_error (__FILE__, __LINE__, _("failed internal consistency check")); /* Need some way to read registers */
}
static void
-monitor_fetch_registers (int regno)
+monitor_fetch_registers (struct regcache *regcache, int regno)
{
monitor_debug ("MON fetchregs\n");
if (current_monitor->getreg.cmd)
{
if (regno >= 0)
{
- monitor_fetch_register (regno);
+ monitor_fetch_register (regcache, regno);
return;
}
- for (regno = 0; regno < NUM_REGS; regno++)
- monitor_fetch_register (regno);
+ for (regno = 0; regno < gdbarch_num_regs (get_regcache_arch (regcache));
+ regno++)
+ monitor_fetch_register (regcache, regno);
}
else
{
- monitor_dump_regs ();
+ monitor_dump_regs (regcache);
}
}
/* Store register REGNO, or all if REGNO == 0. Return errno value. */
static void
-monitor_store_register (int regno)
+monitor_store_register (struct regcache *regcache, int regno)
{
const char *name;
ULONGEST val;
return;
}
- val = read_register (regno);
+ regcache_cooked_read_unsigned (regcache, regno, &val);
monitor_debug ("MON storeg %d %s\n", regno,
- phex (val, register_size (current_gdbarch, regno)));
+ phex (val,
+ register_size (get_regcache_arch (regcache), regno)));
/* send the register deposit command */
/* Store the remote registers. */
static void
-monitor_store_registers (int regno)
+monitor_store_registers (struct regcache *regcache, int regno)
{
if (regno >= 0)
{
- monitor_store_register (regno);
+ monitor_store_register (regcache, regno);
return;
}
- for (regno = 0; regno < NUM_REGS; regno++)
- monitor_store_register (regno);
+ for (regno = 0; regno < gdbarch_num_regs (get_regcache_arch (regcache));
+ regno++)
+ monitor_store_register (regcache, regno);
}
/* Get ready to modify the registers array. On machines which store
debugged. */
static void
-monitor_prepare_to_store (void)
+monitor_prepare_to_store (struct regcache *regcache)
{
/* Do nothing, since we can store individual regs */
}
monitor_debug ("MON write %d %s\n", len, paddr (memaddr));
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- memaddr = ADDR_BITS_REMOVE (memaddr);
+ memaddr = gdbarch_addr_bits_remove (current_gdbarch, memaddr);
/* Use memory fill command for leading 0 bytes. */
paddr_nz (memaddr), (long) myaddr, len);
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- memaddr = ADDR_BITS_REMOVE (memaddr);
+ memaddr = gdbarch_addr_bits_remove (current_gdbarch, memaddr);
if (current_monitor->flags & MO_GETMEM_READ_SINGLE)
return monitor_read_memory_single (memaddr, myaddr, len);
/* All we actually do is set the PC to the start address of exec_bfd. */
static void
-monitor_create_inferior (char *exec_file, char *args, char **env,
- int from_tty)
+monitor_create_inferior (struct target_ops *ops, char *exec_file,
+ char *args, char **env, int from_tty)
{
if (args && (*args != '\000'))
error (_("Args are not supported by the monitor."));
instructions. */
static void
-monitor_mourn_inferior (void)
+monitor_mourn_inferior (struct target_ops *ops)
{
unpush_target (targ_ops);
generic_mourn_inferior (); /* Do all the proper things now */
+ delete_thread_silent (monitor_ptid);
}
/* Tell the monitor to add a breakpoint. */
{
CORE_ADDR addr = bp_tgt->placed_address;
int i;
- const unsigned char *bp;
int bplen;
monitor_debug ("MON inst bkpt %s\n", paddr (addr));
error (_("No set_break defined for this monitor"));
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- addr = ADDR_BITS_REMOVE (addr);
+ addr = gdbarch_addr_bits_remove (current_gdbarch, addr);
/* Determine appropriate breakpoint size for this address. */
- bp = gdbarch_breakpoint_from_pc (current_gdbarch, &addr, &bplen);
+ gdbarch_breakpoint_from_pc (current_gdbarch, &addr, &bplen);
bp_tgt->placed_address = addr;
bp_tgt->placed_size = bplen;
}
static void
-monitor_stop (void)
+monitor_stop (ptid_t ptid)
{
monitor_debug ("MON stop\n");
if ((current_monitor->flags & MO_SEND_BREAK_ON_STOP) != 0)
return dev_name;
}
+/* Check to see if a thread is still alive. */
+
+static int
+monitor_thread_alive (ptid_t ptid)
+{
+ if (ptid_equal (ptid, monitor_ptid))
+ /* The monitor's task is always alive. */
+ return 1;
+
+ return 0;
+}
+
+/* Convert a thread ID to a string. Returns the string in a static
+ buffer. */
+
+static char *
+monitor_pid_to_str (ptid_t ptid)
+{
+ static char buf[64];
+
+ if (ptid_equal (monitor_ptid, ptid))
+ {
+ xsnprintf (buf, sizeof buf, "Thread <main>");
+ return buf;
+ }
+
+ return normal_pid_to_str (ptid);
+}
+
static struct target_ops monitor_ops;
static void
monitor_ops.to_mourn_inferior = monitor_mourn_inferior;
monitor_ops.to_stop = monitor_stop;
monitor_ops.to_rcmd = monitor_rcmd;
+ monitor_ops.to_log_command = serial_log_command;
+ monitor_ops.to_thread_alive = monitor_thread_alive;
+ monitor_ops.to_pid_to_str = monitor_pid_to_str;
monitor_ops.to_stratum = process_stratum;
monitor_ops.to_has_all_memory = 1;
monitor_ops.to_has_memory = 1;
NULL,
NULL, /* FIXME: i18n: */
&setdebuglist, &showdebuglist);
+
+ /* Yes, 42000 is arbitrary. The only sense out of it, is that it
+ isn't 0. */
+ monitor_ptid = ptid_build (42000, 0, 42000);
}