/* Remote debugging interface for boot monitors, for GDB.
- Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
1999, 2000, 2001, 2002 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
/* This file was derived from various remote-* modules. It is a collection
of generic support functions so GDB can talk directly to a ROM based
static void monitor_fetch_registers (int regno);
static void monitor_store_registers (int regno);
static void monitor_prepare_to_store (void);
-static int monitor_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
+static int monitor_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len,
int write,
struct mem_attrib *attrib,
struct target_ops *target);
static void monitor_files_info (struct target_ops *ops);
-static int monitor_insert_breakpoint (CORE_ADDR addr, char *shadow);
-static int monitor_remove_breakpoint (CORE_ADDR addr, char *shadow);
+static int monitor_insert_breakpoint (CORE_ADDR addr, gdb_byte *shadow);
+static int monitor_remove_breakpoint (CORE_ADDR addr, gdb_byte *shadow);
static void monitor_kill (void);
static void monitor_load (char *file, int from_tty);
static void monitor_mourn_inferior (void);
monitor_printable_string (safe_string, string, real_len);
if (final_char)
- error ("%s (0x%s): %s: %s%c", function, paddr_nz (memaddr), message, safe_string, final_char);
+ error (_("%s (0x%s): %s: %s%c"), function, paddr_nz (memaddr), message, safe_string, final_char);
else
- error ("%s (0x%s): %s: %s", function, paddr_nz (memaddr), message, safe_string);
+ error (_("%s (0x%s): %s: %s"), function, paddr_nz (memaddr), message, safe_string);
}
/* Convert hex digit A to a number. */
else if (a >= 'A' && a <= 'F')
return a - 'A' + 10;
else
- error ("Invalid hex digit %d", a);
+ error (_("Invalid hex digit %d"), a);
}
/* monitor_vsprintf - similar to vsprintf but handles 64-bit addresses
len = strlen (sndbuf);
if (len + 1 > sizeof sndbuf)
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
if (monitor_debug_p)
{
len = strlen (sndbuf);
if (len + 1 > sizeof sndbuf)
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
if (monitor_debug_p)
{
return c;
if (c == SERIAL_TIMEOUT)
- error ("Timeout reading from remote system.");
+ error (_("Timeout reading from remote system."));
- perror_with_name ("remote-monitor");
+ perror_with_name (_("remote-monitor"));
}
if (in_monitor_wait) /* Watchdog went off */
{
target_mourn_inferior ();
- error ("GDB serial timeout has expired. Target detached.\n");
+ error (_("GDB serial timeout has expired. Target detached."));
}
else
#endif
- error ("Timeout reading from remote system.");
+ error (_("Timeout reading from remote system."));
- perror_with_name ("remote-monitor");
+ perror_with_name (_("remote-monitor"));
}
/* Scan input from the remote system, until STRING is found. If BUF is non-
re_set_syntax (tmp);
if (val)
- error ("compile_pattern: Can't compile pattern string `%s': %s!", pattern, val);
+ error (_("compile_pattern: Can't compile pattern string `%s': %s!"), pattern, val);
if (fastmap)
re_compile_fastmap (compiled_pattern);
char **p;
if (mon_ops->magic != MONITOR_OPS_MAGIC)
- error ("Magic number of monitor_ops struct wrong.");
+ error (_("Magic number of monitor_ops struct wrong."));
targ_ops = mon_ops->target;
name = targ_ops->to_shortname;
if (!args)
- error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\
-`target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name);
+ error (_("Use `target %s DEVICE-NAME' to use a serial port, or \n\
+`target %s HOST-NAME:PORT-NUMBER' to use a network connection."), name, name);
target_preopen (from_tty);
}
if (from_tty)
- printf_unfiltered ("Remote target %s connected to %s\n", name, dev_name);
+ printf_unfiltered (_("Remote target %s connected to %s\n"), name, dev_name);
push_target (targ_ops);
{
pop_target (); /* calls monitor_close to do the real work */
if (from_tty)
- printf_unfiltered ("Ending remote %s debugging\n", target_shortname);
+ printf_unfiltered (_("Ending remote %s debugging\n"), target_shortname);
}
/* Convert VALSTR into the target byte-ordered value of REGNO and store it. */
monitor_debug ("Supplying Register %d %s\n", regno, valstr);
if (val == 0 && valstr == p)
- error ("monitor_supply_register (%d): bad value from monitor: %s.",
+ error (_("monitor_supply_register (%d): bad value from monitor: %s."),
regno, valstr);
/* supply register stores in target byte order, so swap here */
Give up (and stop debugging it)? "))
{
target_mourn_inferior ();
- throw_exception (RETURN_QUIT);
+ deprecated_throw_reason (RETURN_QUIT);
}
target_terminal_inferior ();
if ((c == '0') && ((c = readchar (timeout)) == 'x'))
;
else
- error ("Bad value returned from monitor while fetching register %x.",
+ error (_("Bad value returned from monitor while fetching register %x."),
regno);
}
parse_register_dump (buf, resp_len);
}
else
- internal_error (__FILE__, __LINE__, "failed internal consistency check"); /* Need some way to read registers */
+ internal_error (__FILE__, __LINE__, _("failed internal consistency check")); /* Need some way to read registers */
}
static void
static void
monitor_files_info (struct target_ops *ops)
{
- printf_unfiltered ("\tAttached to %s at %d baud.\n", dev_name, baud_rate);
+ printf_unfiltered (_("\tAttached to %s at %d baud.\n"), dev_name, baud_rate);
}
static int
c = *p;
}
if (fetched == 0)
- error ("Failed to read via monitor");
+ error (_("Failed to read via monitor"));
if (monitor_debug_p || remote_debug)
fprintf_unfiltered (gdb_stdlog, "\n");
return fetched; /* Return the number of bytes actually read */
unused. */
static int
-monitor_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
+monitor_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int write,
struct mem_attrib *attrib, struct target_ops *target)
{
int res;
int from_tty)
{
if (args && (*args != '\000'))
- error ("Args are not supported by the monitor.");
+ error (_("Args are not supported by the monitor."));
first_time = 1;
clear_proceed_status ();
/* Tell the monitor to add a breakpoint. */
static int
-monitor_insert_breakpoint (CORE_ADDR addr, char *shadow)
+monitor_insert_breakpoint (CORE_ADDR addr, gdb_byte *shadow)
{
int i;
const unsigned char *bp;
monitor_debug ("MON inst bkpt %s\n", paddr (addr));
if (current_monitor->set_break == NULL)
- error ("No set_break defined for this monitor");
+ error (_("No set_break defined for this monitor"));
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
addr = ADDR_BITS_REMOVE (addr);
}
}
- error ("Too many breakpoints (> %d) for monitor.", current_monitor->num_breakpoints);
+ error (_("Too many breakpoints (> %d) for monitor."), current_monitor->num_breakpoints);
}
/* Tell the monitor to remove a breakpoint. */
static int
-monitor_remove_breakpoint (CORE_ADDR addr, char *shadow)
+monitor_remove_breakpoint (CORE_ADDR addr, gdb_byte *shadow)
{
int i;
monitor_debug ("MON rmbkpt %s\n", paddr (addr));
if (current_monitor->clr_break == NULL)
- error ("No clr_break defined for this monitor");
+ error (_("No clr_break defined for this monitor"));
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
addr = ADDR_BITS_REMOVE (addr);
char buf[1000];
if (monitor_desc == NULL)
- error ("monitor target not open.");
+ error (_("monitor target not open."));
p = current_monitor->prompt;
if (a >= 'A' && a <= 'F')
return a - 'A' + 10;
- error ("Reply contains invalid hex digit 0x%x", a);
+ error (_("Reply contains invalid hex digit 0x%x"), a);
}
#endif
_initialize_remote_monitors (void)
{
init_base_monitor_ops ();
- deprecated_add_show_from_set
- (add_set_cmd ("hash", no_class, var_boolean,
- (char *) &hashmark,
- "Set display of activity while downloading a file.\n\
-When enabled, a hashmark \'#\' is displayed.",
- &setlist),
- &showlist);
-
- deprecated_add_show_from_set
- (add_set_cmd ("monitor", no_class, var_zinteger,
- (char *) &monitor_debug_p,
- "Set debugging of remote monitor communication.\n\
+ add_setshow_boolean_cmd ("hash", no_class, &hashmark, _("\
+Set display of activity while downloading a file."), _("\
+Show display of activity while downloading a file."), _("\
+When enabled, a hashmark \'#\' is displayed."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("monitor", no_class, &monitor_debug_p, _("\
+Set debugging of remote monitor communication."), _("\
+Show debugging of remote monitor communication."), _("\
When enabled, communication between GDB and the remote monitor\n\
-is displayed.", &setdebuglist),
- &showdebuglist);
+is displayed."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setdebuglist, &showdebuglist);
}