/* Remote debugging interface for boot monitors, for GDB.
Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2006, 2007 Free Software Foundation, Inc.
+ 2000, 2001, 2002, 2006, 2007, 2008 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
Resurrected from the ashes by Stu Grossman.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* This file was derived from various remote-* modules. It is a collection
of generic support functions so GDB can talk directly to a ROM based
#include "gdb_regex.h"
#include "srec.h"
#include "regcache.h"
+#include "gdbthread.h"
static char *dev_name;
static struct target_ops *targ_ops;
static void monitor_interrupt_query (void);
static void monitor_interrupt_twice (int);
-static void monitor_stop (void);
+static void monitor_stop (ptid_t);
static void monitor_dump_regs (struct regcache *regcache);
#if 0
static int first_time = 0; /* is this the first time we're executing after
gaving created the child proccess? */
+
+/* This is the ptid we use while we're connected to a monitor. Its
+ value is arbitrary, as monitor targets don't have a notion of
+ processes or threads, but we need something non-null to place in
+ inferior_ptid. */
+static ptid_t monitor_ptid;
+
#define TARGET_BUF_SIZE 2048
/* Monitor specific debugging information. Typically only useful to
if (current_monitor->stop)
{
- monitor_stop ();
+ monitor_stop (inferior_ptid);
if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0)
{
monitor_debug ("EXP Open echo\n");
push_target (targ_ops);
- inferior_ptid = pid_to_ptid (42000); /* Make run command think we are busy... */
+ /* Start afresh. */
+ init_thread_list ();
+
+ /* Make run command think we are busy... */
+ inferior_ptid = monitor_ptid;
+ add_thread_silent (inferior_ptid);
/* Give monitor_wait something to read */
}
monitor_desc = NULL;
+
+ delete_thread_silent (monitor_ptid);
}
/* Terminate the open connection to the remote debugger. Use this
/* supply register stores in target byte order, so swap here */
- store_unsigned_integer (regbuf, register_size (current_gdbarch, regno), val);
+ store_unsigned_integer (regbuf,
+ register_size (get_regcache_arch (regcache), regno),
+ val);
regcache_raw_supply (regcache, regno, regbuf);
if (monitor_debug_p || remote_debug)
fprintf_unfiltered (gdb_stdlog, "monitor_interrupt called\n");
- target_stop ();
+ target_stop (inferior_ptid);
}
/* The user typed ^C twice. */
}
if (current_monitor->register_pattern)
- parse_register_dump (current_regcache, buf, resp_len);
+ parse_register_dump (get_current_regcache (), buf, resp_len);
#else
monitor_debug ("Wait fetching registers after stop\n");
- monitor_dump_regs (current_regcache);
+ monitor_dump_regs (get_current_regcache ());
#endif
status->kind = TARGET_WAITKIND_STOPPED;
spaces, but stop reading if something else is seen. Some monitors
like to drop leading zeros. */
- for (i = 0; i < register_size (current_gdbarch, regno) * 2; i++)
+ for (i = 0; i < register_size (get_regcache_arch (regcache), regno) * 2; i++)
{
int c;
c = readchar (timeout);
return;
}
- for (regno = 0; regno < NUM_REGS; regno++)
+ for (regno = 0; regno < gdbarch_num_regs (get_regcache_arch (regcache));
+ regno++)
monitor_fetch_register (regcache, regno);
}
else
regcache_cooked_read_unsigned (regcache, regno, &val);
monitor_debug ("MON storeg %d %s\n", regno,
- phex (val, register_size (current_gdbarch, regno)));
+ phex (val,
+ register_size (get_regcache_arch (regcache), regno)));
/* send the register deposit command */
return;
}
- for (regno = 0; regno < NUM_REGS; regno++)
+ for (regno = 0; regno < gdbarch_num_regs (get_regcache_arch (regcache));
+ regno++)
monitor_store_register (regcache, regno);
}
monitor_debug ("MON write %d %s\n", len, paddr (memaddr));
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- memaddr = ADDR_BITS_REMOVE (memaddr);
+ memaddr = gdbarch_addr_bits_remove (current_gdbarch, memaddr);
/* Use memory fill command for leading 0 bytes. */
paddr_nz (memaddr), (long) myaddr, len);
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- memaddr = ADDR_BITS_REMOVE (memaddr);
+ memaddr = gdbarch_addr_bits_remove (current_gdbarch, memaddr);
if (current_monitor->flags & MO_GETMEM_READ_SINGLE)
return monitor_read_memory_single (memaddr, myaddr, len);
{
unpush_target (targ_ops);
generic_mourn_inferior (); /* Do all the proper things now */
+ delete_thread_silent (monitor_ptid);
}
/* Tell the monitor to add a breakpoint. */
error (_("No set_break defined for this monitor"));
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- addr = ADDR_BITS_REMOVE (addr);
+ addr = gdbarch_addr_bits_remove (current_gdbarch, addr);
/* Determine appropriate breakpoint size for this address. */
bp = gdbarch_breakpoint_from_pc (current_gdbarch, &addr, &bplen);
}
static void
-monitor_stop (void)
+monitor_stop (ptid_t ptid)
{
monitor_debug ("MON stop\n");
if ((current_monitor->flags & MO_SEND_BREAK_ON_STOP) != 0)
return dev_name;
}
+/* Check to see if a thread is still alive. */
+
+static int
+monitor_thread_alive (ptid_t ptid)
+{
+ if (ptid_equal (ptid, monitor_ptid))
+ /* The monitor's task is always alive. */
+ return 1;
+
+ return 0;
+}
+
+/* Convert a thread ID to a string. Returns the string in a static
+ buffer. */
+
+static char *
+monitor_pid_to_str (ptid_t ptid)
+{
+ static char buf[64];
+
+ if (ptid_equal (monitor_ptid, ptid))
+ {
+ xsnprintf (buf, sizeof buf, "Thread <main>");
+ return buf;
+ }
+
+ return normal_pid_to_str (ptid);
+}
+
static struct target_ops monitor_ops;
static void
monitor_ops.to_mourn_inferior = monitor_mourn_inferior;
monitor_ops.to_stop = monitor_stop;
monitor_ops.to_rcmd = monitor_rcmd;
+ monitor_ops.to_log_command = serial_log_command;
+ monitor_ops.to_thread_alive = monitor_thread_alive;
+ monitor_ops.to_pid_to_str = monitor_pid_to_str;
monitor_ops.to_stratum = process_stratum;
monitor_ops.to_has_all_memory = 1;
monitor_ops.to_has_memory = 1;
NULL,
NULL, /* FIXME: i18n: */
&setdebuglist, &showdebuglist);
+
+ /* Yes, 42000 is arbitrary. The only sense out of it, is that it
+ isn't 0. */
+ monitor_ptid = ptid_build (42000, 0, 42000);
}
projects / deliverable / binutils-gdb.git / blobdiff