/* Remote debugging interface for boot monitors, for GDB.
- Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
- Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
+ Copyright 1990, 1991, 1992, 1993, 1995, 1996, 1997
+ Free Software Foundation, Inc.
+ Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
+ Resurrected from the ashes by Stu Grossman.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
/* This file was derived from various remote-* modules. It is a collection
of generic support functions so GDB can talk directly to a ROM based
This module talks to a debug monitor called 'MONITOR', which
We communicate with MONITOR via either a direct serial line, or a TCP
(or possibly TELNET) stream to a terminal multiplexor,
- which in turn talks to the target board.
-*/
+ which in turn talks to the target board. */
+
+/* FIXME 32x64: This code assumes that registers and addresses are at
+ most 32 bits long. If they can be larger, you will need to declare
+ values as LONGEST and use %llx or some such to print values when
+ building commands to send to the monitor. Since we don't know of
+ any actual 64-bit targets with ROM monitors that use this code,
+ it's not an issue right now. -sts 4/18/96 */
#include "defs.h"
#include "gdbcore.h"
#include "target.h"
#include "wait.h"
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
#include <varargs.h>
+#endif
#include <signal.h>
-#include <string.h>
+#include <ctype.h>
+#include "gdb_string.h"
#include <sys/types.h>
#include "command.h"
#include "serial.h"
#include "monitor.h"
-#include "remote-utils.h"
-
-#ifdef HAVE_TERMIO
-# define TERMINAL struct termios
-#else
-# define TERMINAL struct sgttyb
+#include "gdbcmd.h"
+#include "inferior.h"
+#include "gnu-regex.h"
+#include "dcache.h"
+#include "srec.h"
+
+static char *dev_name;
+static struct target_ops *targ_ops;
+
+static void monitor_vsprintf PARAMS ((char *sndbuf, char *pattern, va_list args));
+
+static int readchar PARAMS ((int timeout));
+
+static void monitor_command PARAMS ((char *args, int fromtty));
+
+static void monitor_fetch_register PARAMS ((int regno));
+static void monitor_store_register PARAMS ((int regno));
+
+static int monitor_printable_string PARAMS ((char *newstr, char *oldstr));
+static void monitor_error PARAMS ((char *format, CORE_ADDR memaddr, int len, char *string, int final_char));
+static void monitor_detach PARAMS ((char *args, int from_tty));
+static void monitor_resume PARAMS ((int pid, int step, enum target_signal sig));
+static void monitor_interrupt PARAMS ((int signo));
+static void monitor_interrupt_twice PARAMS ((int signo));
+static void monitor_interrupt_query PARAMS ((void));
+static void monitor_wait_cleanup PARAMS ((void *old_timeout));
+
+static int monitor_wait PARAMS ((int pid, struct target_waitstatus *status));
+static void monitor_fetch_registers PARAMS ((int regno));
+static void monitor_store_registers PARAMS ((int regno));
+static void monitor_prepare_to_store PARAMS ((void));
+static int monitor_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len, int write, struct target_ops *target));
+static void monitor_files_info PARAMS ((struct target_ops *ops));
+static int monitor_insert_breakpoint PARAMS ((CORE_ADDR addr, char *shadow));
+static int monitor_remove_breakpoint PARAMS ((CORE_ADDR addr, char *shadow));
+static void monitor_kill PARAMS ((void));
+static void monitor_load PARAMS ((char *file, int from_tty));
+static void monitor_mourn_inferior PARAMS ((void));
+static void monitor_stop PARAMS ((void));
+
+static int monitor_read_memory PARAMS ((CORE_ADDR addr, char *myaddr,int len));
+static int monitor_write_memory PARAMS ((CORE_ADDR addr, char *myaddr,int len));
+static int monitor_write_memory_bytes PARAMS ((CORE_ADDR addr,
+ char *myaddr,int len));
+static int monitor_write_memory_block PARAMS((
+ CORE_ADDR memaddr ,
+ char * myaddr ,
+ int len)) ;
+static int monitor_expect_regexp PARAMS ((struct re_pattern_buffer *pat,
+ char *buf, int buflen));
+static void monitor_dump_regs PARAMS((void)) ;
+#if 0
+static int from_hex PARAMS ((int a));
+static unsigned long get_hex_word PARAMS ((void));
#endif
+static void parse_register_dump PARAMS ((char *, int));
+
+static struct monitor_ops *current_monitor;
-struct monitor_ops *current_monitor;
-extern struct cmd_list_element *setlist;
-extern struct cmd_list_element *unsetlist;
-struct cmd_list_element *showlist;
+static int hashmark; /* flag set by "set hash" */
-static int hashmark; /* flag set by "set hash" */
+static int timeout = 30;
-/* FIXME: Replace with sr_get_debug (). */
-#define LOG_FILE "monitor.log"
-#if defined (LOG_FILE)
-FILE *log_file;
+static int in_monitor_wait = 0; /* Non-zero means we are in monitor_wait() */
+
+static void (*ofunc)(); /* Old SIGINT signal handler */
+
+/* Extra remote debugging for developing a new rom monitor variation */
+#if ! defined(EXTRA_RDEBUG)
+#define EXTRA_RDEBUG 0
#endif
+#define RDEBUG(stuff) { if (EXTRA_RDEBUG && remote_debug) printf stuff ; }
-static int timeout = 24;
+/* Descriptor for I/O to remote machine. Initialize it to NULL so
+ that monitor_open knows that we don't have a file open when the
+ program starts. */
-/* Descriptor for I/O to remote machine. Initialize it to NULL so that
- monitor_open knows that we don't have a file open when the program starts.
- */
static serial_t monitor_desc = NULL;
-/* sets the download protocol, choices are srec, generic, boot */
-char *loadtype;
-static char *loadtype_str;
-static void set_loadtype_command();
+/* Pointer to regexp pattern matching data */
+
+static struct re_pattern_buffer register_pattern;
+static char register_fastmap[256];
+
+static struct re_pattern_buffer getmem_resp_delim_pattern;
+static char getmem_resp_delim_fastmap[256];
+
+static int dump_reg_flag; /* Non-zero means do a dump_registers cmd when
+ monitor_wait wakes up. */
+
+static DCACHE *remote_dcache;
+static int first_time=0; /* is this the first time we're executing after
+ gaving created the child proccess? */
+
+/* Convert a string into a printable representation, Return # byte in the
+ new string. */
+
+static int
+monitor_printable_string (newstr, oldstr)
+ char *newstr;
+ char *oldstr;
+{
+ char *save = newstr;
+ int ch;
+
+ while ((ch = *oldstr++) != '\0')
+ {
+ switch (ch)
+ {
+ default:
+ if (isprint (ch))
+ *newstr++ = ch;
+
+ else
+ {
+ sprintf (newstr, "\\x%02x", ch & 0xff);
+ newstr += 4;
+ }
+ break;
+
+ case '\\': *newstr++ = '\\'; *newstr++ = '\\'; break;
+ case '\b': *newstr++ = '\\'; *newstr++ = 'b'; break;
+ case '\f': *newstr++ = '\\'; *newstr++ = 't'; break;
+ case '\n': *newstr++ = '\\'; *newstr++ = 'n'; break;
+ case '\r': *newstr++ = '\\'; *newstr++ = 'r'; break;
+ case '\t': *newstr++ = '\\'; *newstr++ = 't'; break;
+ case '\v': *newstr++ = '\\'; *newstr++ = 'v'; break;
+ }
+ }
+
+ *newstr++ = '\0';
+ return newstr - save;
+}
+
+/* Print monitor errors with a string, converting the string to printable
+ representation. */
-/*
- * set_loadtype_command -- set the type for downloading. Check to make
- * sure you have a support protocol for this target.
- */
static void
-set_loadtype_command (ignore, from_tty, c)
- char *ignore;
- int from_tty;
- struct cmd_list_element *c;
+monitor_error (format, memaddr, len, string, final_char)
+ char *format;
+ CORE_ADDR memaddr;
+ int len;
+ char *string;
+ int final_char;
{
-#if 0
- char *type;
- if (strcmp (LOADTYPES, "")) {
- error ("No loadtype set");
- return;
- }
+ int real_len = (len == 0 && string != (char *)0) ? strlen (string) : len;
+ char *safe_string = alloca ((real_len * 4) + 1);
+ char *p, *q;
+ int ch;
+ int safe_len = monitor_printable_string (safe_string, string);
+
+ if (final_char)
+ error (format, (int)memaddr, p - safe_string, safe_string, final_char);
+ else
+ error (format, (int)memaddr, p - safe_string, safe_string);
+}
+
+/* Convert hex digit A to a number. */
+
+static int
+fromhex (a)
+ int a;
+{
+ if (a >= '0' && a <= '9')
+ return a - '0';
+ else if (a >= 'a' && a <= 'f')
+ return a - 'a' + 10;
+ else
+ if (a >= 'A' && a <= 'F')
+ return a - 'A' + 10 ;
+ else error ("Invalid hex digit %d", a);
+}
+
+/* monitor_vsprintf - similar to vsprintf but handles 64-bit addresses
+
+ This function exists to get around the problem that many host platforms
+ don't have a printf that can print 64-bit addresses. The %A format
+ specification is recognized as a special case, and causes the argument
+ to be printed as a 64-bit hexadecimal address.
+
+ Only format specifiers of the form "[0-9]*[a-z]" are recognized.
+ If it is a '%s' format, the argument is a string; otherwise the
+ argument is assumed to be a long integer.
+
+ %% is also turned into a single %.
+*/
- type = strtok(LOADTYPES, ",");
- if (STREQ (type, (*(char **) c->var))) {
- loadtype_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
- return;
+static void
+monitor_vsprintf (sndbuf, pattern, args)
+ char *sndbuf;
+ char *pattern;
+ va_list args;
+{
+ char format[10];
+ char fmt;
+ char *p;
+ int i;
+ long arg_int;
+ CORE_ADDR arg_addr;
+ char *arg_string;
+
+ for (p = pattern; *p; p++)
+ {
+ if (*p == '%')
+ {
+ /* Copy the format specifier to a separate buffer. */
+ format[0] = *p++;
+ for (i = 1; *p >= '0' && *p <= '9' && i < (int) sizeof (format) - 2;
+ i++, p++)
+ format[i] = *p;
+ format[i] = fmt = *p;
+ format[i+1] = '\0';
+
+ /* Fetch the next argument and print it. */
+ switch (fmt)
+ {
+ case '%':
+ strcpy (sndbuf, "%");
+ break;
+ case 'A':
+ arg_addr = va_arg (args, CORE_ADDR);
+ strcpy (sndbuf, paddr_nz (arg_addr));
+ break;
+ case 's':
+ arg_string = va_arg (args, char *);
+ sprintf (sndbuf, format, arg_string);
+ break;
+ default:
+ arg_int = va_arg (args, long);
+ sprintf (sndbuf, format, arg_int);
+ break;
+ }
+ sndbuf += strlen (sndbuf);
+ }
+ else
+ *sndbuf++ = *p;
}
-
- while (type = strtok (NULL, ",") != (char *)NULL)
- if (STREQ (type, (*(char **) c->var)))
- loadtype_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
+ *sndbuf = '\0';
+}
+
+
+/* monitor_printf_noecho -- Send data to monitor, but don't expect an echo.
+ Works just like printf. */
+
+void
+#ifdef ANSI_PROTOTYPES
+monitor_printf_noecho (char *pattern, ...)
+#else
+monitor_printf_noecho (va_alist)
+ va_dcl
#endif
- loadtype_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
+{
+ va_list args;
+ char sndbuf[2000];
+ int len;
+
+#if ANSI_PROTOTYPES
+ va_start (args, pattern);
+#else
+ char *pattern;
+ va_start (args);
+ pattern = va_arg (args, char *);
+#endif
+
+ monitor_vsprintf (sndbuf, pattern, args);
+
+ len = strlen (sndbuf);
+ if (len + 1 > sizeof sndbuf)
+ abort ();
+
+#if 0
+ if (remote_debug > 0)
+ puts_debug ("sent -->", sndbuf, "<--");
+#endif
+ if (EXTRA_RDEBUG
+ && remote_debug)
+ {
+ char *safe_string = (char *) alloca ((strlen (sndbuf) * 4) + 1);
+ monitor_printable_string (safe_string, sndbuf);
+ printf ("sent[%s]\n", safe_string);
+ }
+
+ monitor_write (sndbuf, len);
}
-/*
- * printf_monitor -- send data to monitor. Works just like printf.
- */
-static void
-printf_monitor(va_alist)
+/* monitor_printf -- Send data to monitor and check the echo. Works just like
+ printf. */
+
+void
+#ifdef ANSI_PROTOTYPES
+monitor_printf (char *pattern, ...)
+#else
+monitor_printf (va_alist)
va_dcl
+#endif
{
va_list args;
+ char sndbuf[2000];
+ int len;
+
+#ifdef ANSI_PROTOTYPES
+ va_start (args, pattern);
+#else
char *pattern;
- char buf[200];
- int i;
+ va_start (args);
+ pattern = va_arg (args, char *);
+#endif
- va_start(args);
+ monitor_vsprintf (sndbuf, pattern, args);
- pattern = va_arg(args, char *);
+ len = strlen (sndbuf);
+ if (len + 1 > sizeof sndbuf)
+ abort ();
- vsprintf(buf, pattern, args);
+#if 0
+ if (remote_debug > 0)
+ puts_debug ("sent -->", sndbuf, "<--");
+#endif
+ if (EXTRA_RDEBUG
+ && remote_debug)
+ {
+ char *safe_string = (char *) alloca ((len * 4) + 1);
+ monitor_printable_string (safe_string, sndbuf);
+ printf ("sent[%s]\n", safe_string);
+ }
- debuglogs (1, "printf_monitor(), Sending: \"%s\".", buf);
+ monitor_write (sndbuf, len);
- if (SERIAL_WRITE(monitor_desc, buf, strlen(buf)))
- fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
+ /* We used to expect that the next immediate output was the characters we
+ just output, but sometimes some extra junk appeared before the characters
+ we expected, like an extra prompt, or a portmaster sending telnet negotiations.
+ So, just start searching for what we sent, and skip anything unknown. */
+ RDEBUG(("ExpectEcho\n"))
+ monitor_expect (sndbuf, (char *)0, 0);
}
-/*
- * debuglogs -- deal with debugging info to multiple sources. This takes
- * two real args, the first one is the level to be compared against
- * the sr_get_debug() value, the second arg is a printf buffer and args
- * to be formatted and printed. A CR is added after each string is printed.
- */
-static void
-debuglogs(va_alist)
- va_dcl
+
+/* Write characters to the remote system. */
+
+void
+monitor_write (buf, buflen)
+ char *buf;
+ int buflen;
{
- va_list args;
- char *pattern, *p;
- char buf[200];
- char newbuf[300];
- int level, i;
+ if (SERIAL_WRITE(monitor_desc, buf, buflen))
+ fprintf_unfiltered (gdb_stderr, "SERIAL_WRITE failed: %s\n",
+ safe_strerror (errno));
+}
- va_start(args);
- level = va_arg(args, int); /* get the debug level */
- if ((level <0) || (level > 100)) {
- error ("Bad argument passed to debuglogs()");
- return;
- }
-
- pattern = va_arg(args, char *); /* get the printf style pattern */
+/* Read a binary character from the remote system, doing all the fancy
+ timeout stuff, but without interpreting the character in any way,
+ and without printing remote debug information. */
- vsprintf(buf, pattern, args); /* format the string */
-
- /* convert some characters so it'll look right in the log */
- p = newbuf;
- for (i=0 ; buf[i] != '\0'; i++) {
- switch (buf[i]) {
- case '\n': /* newlines */
- *p++ = '\\';
- *p++ = 'n';
- continue;
- case '\r': /* carriage returns */
- *p++ = '\\';
- *p++ = 'r';
- continue;
- case '\033': /* escape */
- *p++ = '\\';
- *p++ = 'e';
- continue;
- case '\t': /* tab */
- *p++ = '\\';
- *p++ = 't';
- continue;
- case '\b': /* backspace */
- *p++ = '\\';
- *p++ = 'b';
- continue;
- default: /* no change */
- *p++ = buf[i];
- }
-
- if (buf[i] < 26) { /* modify control characters */
- *p++ = '^';
- *p++ = buf[i] + 'A';
- continue;
+int
+monitor_readchar ()
+{
+ int c;
+ int looping;
+
+ do
+ {
+ looping = 0;
+ c = SERIAL_READCHAR (monitor_desc, timeout);
+
+ if (c >= 0)
+ c &= 0xff; /* don't lose bit 7 */
}
- }
- *p = '\0'; /* terminate the string */
+ while (looping);
- if (sr_get_debug() > level)
- puts (newbuf);
+ if (c >= 0)
+ return c;
-#ifdef LOG_FILE /* write to the monitor log */
- if (log_file != 0x0) {
- fputs (newbuf, log_file);
- fputc ('\n', log_file);
- fflush (log_file);
- }
-#endif
+ if (c == SERIAL_TIMEOUT)
+ error ("Timeout reading from remote system.");
+
+ perror_with_name ("remote-monitor");
}
-/* readchar -- read a character from the remote system, doing all the fancy
- * timeout stuff.
- */
+
+/* Read a character from the remote system, doing all the fancy
+ timeout stuff. */
+
static int
-readchar(timeout)
+readchar (timeout)
int timeout;
{
int c;
+ static enum { last_random, last_nl, last_cr, last_crnl } state = last_random;
+ int looping;
- c = SERIAL_READCHAR(monitor_desc, timeout);
+ do
+ {
+ looping = 0;
+ c = SERIAL_READCHAR (monitor_desc, timeout);
- if (sr_get_debug() > 4)
- putchar(c & 0x7f);
+ if (c >= 0)
+ {
+ c &= 0x7f;
+#if 0
+ /* This seems to interfere with proper function of the
+ input stream */
+ if (remote_debug > 0)
+ {
+ char buf[2];
+ buf[0] = c;
+ buf[1] = '\0';
+ puts_debug ("read -->", buf, "<--");
+ }
+
+#endif
+ }
-#ifdef LOG_FILE
- if (isascii (c))
- putc(c & 0x7f, log_file);
-#endif
+ /* Canonicialize \n\r combinations into one \r */
+ if ((current_monitor->flags & MO_HANDLE_NL) != 0)
+ {
+ if ((c == '\r' && state == last_nl)
+ || (c == '\n' && state == last_cr))
+ {
+ state = last_crnl;
+ looping = 1;
+ }
+ else if (c == '\r')
+ state = last_cr;
+ else if (c != '\n')
+ state = last_random;
+ else
+ {
+ state = last_nl;
+ c = '\r';
+ }
+ }
+ }
+ while (looping);
if (c >= 0)
- return c & 0x7f;
-
- if (c == SERIAL_TIMEOUT) {
- if (timeout == 0)
- return c; /* Polls shouldn't generate timeout errors */
- error("Timeout reading from remote system.");
-#ifdef LOG_FILE
- fputc ("ERROR: Timeout reading from remote system", log_file);
+ return c;
+
+ if (c == SERIAL_TIMEOUT)
+#if 0 /* MAINTENANCE_CMDS */
+ /* I fail to see how detaching here can be useful */
+ if (in_monitor_wait) /* Watchdog went off */
+ {
+ target_mourn_inferior ();
+ error ("GDB serial timeout has expired. Target detached.\n");
+ }
+ else
#endif
- }
- perror_with_name("remote-monitor");
+ error ("Timeout reading from remote system.");
+
+ perror_with_name ("remote-monitor");
}
-/*
- * expect -- scan input from the remote system, until STRING is found.
- * If DISCARD is non-zero, then discard non-matching input, else print
- * it out. Let the user break out immediately.
- */
-static void
-expect (string, discard)
+/* Scan input from the remote system, until STRING is found. If BUF is non-
+ zero, then collect input until we have collected either STRING or BUFLEN-1
+ chars. In either case we terminate BUF with a 0. If input overflows BUF
+ because STRING can't be found, return -1, else return number of chars in BUF
+ (minus the terminating NUL). Note that in the non-overflow case, STRING
+ will be at the end of BUF. */
+
+int
+monitor_expect (string, buf, buflen)
char *string;
- int discard;
+ char *buf;
+ int buflen;
{
char *p = string;
+ int obuflen = buflen;
int c;
+ extern struct target_ops *targ_ops;
-
- debuglogs (1, "Expecting \"%s\".", string);
+ if (EXTRA_RDEBUG
+ && remote_debug)
+ {
+ char *safe_string = (char *) alloca ((strlen (string) * 4) + 1);
+ monitor_printable_string (safe_string, string);
+ printf ("MON Expecting '%s'\n", safe_string);
+ }
immediate_quit = 1;
- while (1) {
- c = readchar(timeout);
- if (!isascii (c))
- continue;
- if (c == *p++) {
- if (*p == '\0') {
- immediate_quit = 0;
- debuglogs (4, "Matched");
- return;
- }
- } else {
- if (!discard) {
- fwrite(string, 1, (p - 1) - string, stdout);
- putchar((char)c);
- fflush(stdout);
- }
- p = string;
+ while (1)
+ {
+ if (buf)
+ {
+ if (buflen < 2)
+ {
+ *buf = '\000';
+ immediate_quit = 0;
+ return -1;
+ }
+
+ c = readchar (timeout);
+ if (c == '\000')
+ continue;
+ *buf++ = c;
+ buflen--;
+ }
+ else
+ c = readchar (timeout);
+
+ /* Don't expect any ^C sent to be echoed */
+
+ if (*p == '\003' || c == *p)
+ {
+ p++;
+ if (*p == '\0')
+ {
+ immediate_quit = 0;
+
+ if (buf)
+ {
+ *buf++ = '\000';
+ return obuflen - buflen;
+ }
+ else
+ return 0;
+ }
+ }
+ else if ((c == '\021' || c == '\023') &&
+ (strcmp(targ_ops->to_shortname, "m32r") == 0))
+ { /* m32r monitor emits random DC1/DC3 chars */
+ continue;
+ }
+ else
+ {
+ p = string;
+ if (c == *p)
+ p++;
+ }
+ }
+}
+
+/* Search for a regexp. */
+
+static int
+monitor_expect_regexp (pat, buf, buflen)
+ struct re_pattern_buffer *pat;
+ char *buf;
+ int buflen;
+{
+ char *mybuf;
+ char *p;
+ RDEBUG(("MON Expecting regexp\n")) ;
+ if (buf)
+ mybuf = buf;
+ else
+ {
+ mybuf = alloca (1024);
+ buflen = 1024;
+ }
+
+ p = mybuf;
+ while (1)
+ {
+ int retval;
+
+ if (p - mybuf >= buflen)
+ { /* Buffer about to overflow */
+
+/* On overflow, we copy the upper half of the buffer to the lower half. Not
+ great, but it usually works... */
+
+ memcpy (mybuf, mybuf + buflen / 2, buflen / 2);
+ p = mybuf + buflen / 2;
+ }
+
+ *p++ = readchar (timeout);
+
+ retval = re_search (pat, mybuf, p - mybuf, 0, p - mybuf, NULL);
+ if (retval >= 0)
+ return 1;
}
- }
}
/* Keep discarding input until we see the MONITOR prompt.
o give your command
o *then* wait for the prompt.
- Thus the last thing that a procedure does with the serial line
- will be an expect_prompt(). Exception: monitor_resume does not
- wait for the prompt, because the terminal is being handed over
- to the inferior. However, the next thing which happens after that
- is a monitor_wait which does wait for the prompt.
- Note that this includes abnormal exit, e.g. error(). This is
- necessary to prevent getting into states from which we can't
- recover. */
-static void
-expect_prompt(discard)
- int discard;
-{
-#if defined (LOG_FILE)
- /* This is a convenient place to do this. The idea is to do it often
- enough that we never lose much data if we terminate abnormally. */
- fflush(log_file);
-#endif
- expect (PROMPT, discard);
-}
+ Thus the last thing that a procedure does with the serial line will
+ be an monitor_expect_prompt(). Exception: monitor_resume does not
+ wait for the prompt, because the terminal is being handed over to
+ the inferior. However, the next thing which happens after that is
+ a monitor_wait which does wait for the prompt. Note that this
+ includes abnormal exit, e.g. error(). This is necessary to prevent
+ getting into states from which we can't recover. */
-/*
- * junk -- ignore junk characters. Returns a 1 if junk, 0 otherwise
- */
-static int
-junk(ch)
- char ch;
+int
+monitor_expect_prompt (buf, buflen)
+ char *buf;
+ int buflen;
{
- switch (ch) {
- case ' ':
- case '-':
- case '\t':
- case '\r':
- case '\n':
- if (sr_get_debug() > 5)
- debuglogs (5, "Ignoring \'%c\'.", ch);
- return 1;
- default:
- if (sr_get_debug() > 5)
- debuglogs (5, "Accepting \'%c\'.", ch);
- return 0;
- }
+ RDEBUG(("MON Expecting prompt\n"))
+ return monitor_expect (current_monitor->prompt, buf, buflen);
}
-/*
- * get_hex_digit -- Get a hex digit from the remote system & return its value.
- * If ignore is nonzero, ignore spaces, newline & tabs.
- */
-static int
-get_hex_digit(ignore)
- int ignore;
+/* Get N 32-bit words from remote, each preceded by a space, and put
+ them in registers starting at REGNO. */
+
+#if 0
+static unsigned long
+get_hex_word ()
{
- static int ch;
- while (1) {
- ch = readchar(timeout);
- if (junk(ch))
- continue;
- if (sr_get_debug() > 4)
- debuglogs (4, "get_hex_digit() got a 0x%x(%c)", ch, ch);
-
- if (ch >= '0' && ch <= '9')
- return ch - '0';
- else if (ch >= 'A' && ch <= 'F')
- return ch - 'A' + 10;
- else if (ch >= 'a' && ch <= 'f')
- return ch - 'a' + 10;
- else if (ch == ' ' && ignore)
- ;
- else {
- expect_prompt(1);
- error("Invalid hex digit from remote system.");
+ unsigned long val;
+ int i;
+ int ch;
+
+ do
+ ch = readchar (timeout);
+ while (isspace(ch));
+
+ val = from_hex (ch);
+
+ for (i = 7; i >= 1; i--)
+ {
+ ch = readchar (timeout);
+ if (!isxdigit (ch))
+ break;
+ val = (val << 4) | from_hex (ch);
}
- }
+
+ return val;
}
+#endif
-/* get_hex_byte -- Get a byte from monitor and put it in *BYT.
- * Accept any number leading spaces.
- */
static void
-get_hex_byte (byt)
- char *byt;
+compile_pattern (pattern, compiled_pattern, fastmap)
+ char *pattern;
+ struct re_pattern_buffer *compiled_pattern;
+ char *fastmap;
{
- int val;
+ int tmp;
+ const char *val;
- val = get_hex_digit (1) << 4;
- debuglogs (4, "get_hex_digit() -- Read first nibble 0x%x", val);
-
- val |= get_hex_digit (0);
- debuglogs (4, "get_hex_digit() -- Read second nibble 0x%x", val);
- *byt = val;
-
- debuglogs (4, "get_hex_digit() -- Read a 0x%x", val);
-}
+ compiled_pattern->fastmap = fastmap;
-/*
- * get_hex_word -- Get N 32-bit words from remote, each preceded by a space,
- * and put them in registers starting at REGNO.
- */
-static int
-get_hex_word ()
-{
- long val;
- int i;
+ tmp = re_set_syntax (RE_SYNTAX_EMACS);
+ val = re_compile_pattern (pattern,
+ strlen (pattern),
+ compiled_pattern);
+ re_set_syntax (tmp);
- val = 0;
- for (i = 0; i < 8; i++)
- val = (val << 4) + get_hex_digit (i == 0);
-
- debuglogs (4, "get_hex_word() got a 0x%x.", val);
+ if (val)
+ error ("compile_pattern: Can't compile pattern string `%s': %s!", pattern, val);
- return val;
+ if (fastmap)
+ re_compile_fastmap (compiled_pattern);
}
-/* This is called not only when we first attach, but also when the
- user types "run" after having attached. */
+/* Open a connection to a remote debugger. NAME is the filename used
+ for communication. */
+
void
-monitor_create_inferior (execfile, args, env)
- char *execfile;
+monitor_open (args, mon_ops, from_tty)
char *args;
- char **env;
+ struct monitor_ops *mon_ops;
+ int from_tty;
{
- int entry_pt;
+ char *name;
+ char **p;
- if (args && *args)
- error("Can't pass arguments to remote MONITOR process");
+ if (mon_ops->magic != MONITOR_OPS_MAGIC)
+ error ("Magic number of monitor_ops struct wrong.");
- if (execfile == 0 || exec_bfd == 0)
- error("No exec file specified");
+ targ_ops = mon_ops->target;
+ name = targ_ops->to_shortname;
- entry_pt = (int) bfd_get_start_address (exec_bfd);
+ if (!args)
+ error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\
+`target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name);
- debuglogs (1, "create_inferior(exexfile=%s, args=%s, env=%s)", execfile, args, env);
+ target_preopen (from_tty);
-/* The "process" (board) is already stopped awaiting our commands, and
- the program is already downloaded. We just set its PC and go. */
+ /* Setup pattern for register dump */
- clear_proceed_status ();
+ if (mon_ops->register_pattern)
+ compile_pattern (mon_ops->register_pattern, ®ister_pattern,
+ register_fastmap);
- /* Tell wait_for_inferior that we've started a new process. */
- init_wait_for_inferior ();
+ if (mon_ops->getmem.resp_delim)
+ compile_pattern (mon_ops->getmem.resp_delim, &getmem_resp_delim_pattern,
+ getmem_resp_delim_fastmap);
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- target_terminal_init ();
+ unpush_target (targ_ops);
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
+ if (dev_name)
+ free (dev_name);
+ dev_name = strsave (args);
- /* insert_step_breakpoint (); FIXME, do we need this? */
+ monitor_desc = SERIAL_OPEN (dev_name);
- /* Let 'er rip... */
- proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);
-}
+ if (!monitor_desc)
+ perror_with_name (dev_name);
-/*
- * monitor_open -- open a connection to a remote debugger.
- * NAME is the filename used for communication.
- */
-static int baudrate = 9600;
-static char dev_name[100];
+ if (baud_rate != -1)
+ {
+ if (SERIAL_SETBAUDRATE (monitor_desc, baud_rate))
+ {
+ SERIAL_CLOSE (monitor_desc);
+ perror_with_name (dev_name);
+ }
+ }
+
+ SERIAL_RAW (monitor_desc);
-void
-monitor_open(args, name, from_tty)
- char *args;
- char *name;
- int from_tty;
-{
+ SERIAL_FLUSH_INPUT (monitor_desc);
- if (args == NULL)
- error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\
-`target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name);
+ /* some systems only work with 2 stop bits */
-/* if (is_open) */
- monitor_close(0);
+ SERIAL_SETSTOPBITS (monitor_desc, mon_ops->stopbits);
- strcpy(dev_name, args);
- monitor_desc = SERIAL_OPEN(dev_name);
+ current_monitor = mon_ops;
- if (monitor_desc == NULL)
- perror_with_name(dev_name);
+ /* See if we can wake up the monitor. First, try sending a stop sequence,
+ then send the init strings. Last, remove all breakpoints. */
- if (baud_rate != -1) {
- if (SERIAL_SETBAUDRATE (monitor_desc, baud_rate)) {
- SERIAL_CLOSE (monitor_desc);
- perror_with_name (name);
+ if (current_monitor->stop)
+ {
+ monitor_stop ();
+ if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0)
+ {
+ RDEBUG(("EXP Open echo\n")) ;
+ monitor_expect_prompt (NULL, 0);
+ }
}
- }
-
- SERIAL_RAW(monitor_desc);
-
-#if defined (LOG_FILE)
- log_file = fopen (LOG_FILE, "w");
- if (log_file == NULL)
- perror_with_name (LOG_FILE);
-#endif
/* wake up the monitor and see if it's alive */
- printf_monitor(INIT_CMD);
- expect_prompt(1); /* See if we get a prompt */
+ for (p = mon_ops->init; *p != NULL; p++)
+ {
+ /* Some of the characters we send may not be echoed,
+ but we hope to get a prompt at the end of it all. */
+
+ if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0)
+ monitor_printf(*p);
+ else
+ monitor_printf_noecho (*p);
+ monitor_expect_prompt (NULL, 0);
+ }
+
+ SERIAL_FLUSH_INPUT (monitor_desc);
- /* try again to be sure */
- printf_monitor(INIT_CMD);
- expect_prompt(1); /* See if we get a prompt */
+ /* Remove all breakpoints */
+
+ if (mon_ops->clr_all_break)
+ {
+ monitor_printf (mon_ops->clr_all_break);
+ monitor_expect_prompt (NULL, 0);
+ }
if (from_tty)
- printf("Remote target %s connected to %s\n", TARGET_NAME, dev_name);
+ printf_unfiltered ("Remote target %s connected to %s\n", name, dev_name);
+
+ push_target (targ_ops);
+
+ inferior_pid = 42000; /* Make run command think we are busy... */
+
+ /* Give monitor_wait something to read */
+
+ monitor_printf (current_monitor->line_term);
+
+ if (current_monitor->flags & MO_HAS_BLOCKWRITES)
+ remote_dcache = dcache_init (monitor_read_memory, monitor_write_memory_block);
+ else
+ remote_dcache = dcache_init (monitor_read_memory, monitor_write_memory);
+ start_remote ();
}
-/*
- * monitor_close -- Close out all files and local state before this
- * target loses control.
- */
+/* Close out all files and local state before this target loses
+ control. */
void
monitor_close (quitting)
int quitting;
{
- SERIAL_CLOSE(monitor_desc);
+ if (monitor_desc)
+ SERIAL_CLOSE (monitor_desc);
monitor_desc = NULL;
+}
- debuglogs (1, "monitor_close (quitting=%d)", quitting);
+/* Terminate the open connection to the remote debugger. Use this
+ when you want to detach and do something else with your gdb. */
-#if defined (LOG_FILE)
- if (log_file) {
- if (ferror(log_file))
- fprintf(stderr, "Error writing log file.\n");
- if (fclose(log_file) != 0)
- fprintf(stderr, "Error closing log file.\n");
- }
-#endif
+static void
+monitor_detach (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ pop_target (); /* calls monitor_close to do the real work */
+ if (from_tty)
+ printf_unfiltered ("Ending remote %s debugging\n", target_shortname);
}
-/*
- * monitor_detach -- terminate the open connection to the remote
- * debugger. Use this when you want to detach and do something
- * else with your gdb.
- */
-void
-monitor_detach (from_tty)
- int from_tty;
+/* Convert VALSTR into the target byte-ordered value of REGNO and store it. */
+
+char *
+monitor_supply_register (regno, valstr)
+ int regno;
+ char *valstr;
{
+ unsigned int val;
+ unsigned char regbuf[MAX_REGISTER_RAW_SIZE];
+ char *p;
- debuglogs (1, "monitor_detach ()");
+ val = strtoul (valstr, &p, 16);
+ RDEBUG(("Supplying Register %d %s\n",regno,valstr)) ;
- pop_target(); /* calls monitor_close to do the real work */
- if (from_tty)
- printf ("Ending remote %s debugging\n", target_shortname);
+ if (val == 0 && valstr == p)
+ error ("monitor_supply_register (%d): bad value from monitor: %s.",
+ regno, valstr);
+
+ /* supply register stores in target byte order, so swap here */
+
+ store_unsigned_integer (regbuf, REGISTER_RAW_SIZE (regno), val);
+
+ supply_register (regno, regbuf);
+
+ return p;
}
-/*
- * monitor_attach -- attach GDB to the target.
- */
+/* Tell the remote machine to resume. */
+
void
-monitor_attach (args, from_tty)
- char *args;
- int from_tty;
+flush_monitor_dcache ()
{
- if (from_tty)
- printf ("Starting remote %s debugging\n", target_shortname);
-
- debuglogs (1, "monitor_attach (args=%s)", args);
-
- printf_monitor (GO_CMD);
- /* swallow the echo. */
- expect (GO_CMD, 1);
+ dcache_flush (remote_dcache);
}
-
-/*
- * monitor_resume -- Tell the remote machine to resume.
- */
-void
+
+static void
monitor_resume (pid, step, sig)
int pid, step;
enum target_signal sig;
{
- debuglogs (1, "monitor_resume (step=%d, sig=%d)", step, sig);
+ /* Some monitors require a different command when starting a program */
+ RDEBUG(("MON resume\n")) ;
+ if (current_monitor->flags & MO_RUN_FIRST_TIME && first_time == 1)
+ {
+ first_time = 0;
+ monitor_printf ("run\r");
+ if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT)
+ dump_reg_flag = 1;
+ return;
+ }
+ dcache_flush (remote_dcache);
+ if (step)
+ monitor_printf (current_monitor->step);
+ else
+ {
+ if (current_monitor->continue_hook)
+ (*current_monitor->continue_hook)() ;
+ else monitor_printf (current_monitor->cont);
+ if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT)
+ dump_reg_flag = 1;
+ }
+}
- if (step) {
- printf_monitor (STEP_CMD);
- } else {
- printf_monitor (CONT_CMD);
- }
+/* Parse the output of a register dump command. A monitor specific
+ regexp is used to extract individual register descriptions of the
+ form REG=VAL. Each description is split up into a name and a value
+ string which are passed down to monitor specific code. */
+
+static void
+parse_register_dump (buf, len)
+ char *buf;
+ int len;
+{
+ RDEBUG(("MON Parsing register dump\n"))
+ while (1)
+ {
+ int regnamelen, vallen;
+ char *regname, *val;
+ /* Element 0 points to start of register name, and element 1
+ points to the start of the register value. */
+ struct re_registers register_strings;
+
+ memset (®ister_strings, 0, sizeof (struct re_registers));
+
+ if (re_search (®ister_pattern, buf, len, 0, len,
+ ®ister_strings) == -1)
+ break;
+
+ regnamelen = register_strings.end[1] - register_strings.start[1];
+ regname = buf + register_strings.start[1];
+ vallen = register_strings.end[2] - register_strings.start[2];
+ val = buf + register_strings.start[2];
+
+ current_monitor->supply_register (regname, regnamelen, val, vallen);
+
+ buf += register_strings.end[0];
+ len -= register_strings.end[0];
+ }
}
-/*
- * monitor_wait -- Wait until the remote machine stops, then return,
- * storing status in status just as `wait' would.
- */
-int
+/* Send ^C to target to halt it. Target will respond, and send us a
+ packet. */
+
+static void
+monitor_interrupt (signo)
+ int signo;
+{
+ /* If this doesn't work, try more severe steps. */
+ signal (signo, monitor_interrupt_twice);
+
+ if (remote_debug)
+ printf_unfiltered ("monitor_interrupt called\n");
+
+ target_stop ();
+}
+
+/* The user typed ^C twice. */
+
+static void
+monitor_interrupt_twice (signo)
+ int signo;
+{
+ signal (signo, ofunc);
+
+ monitor_interrupt_query ();
+
+ signal (signo, monitor_interrupt);
+}
+
+/* Ask the user what to do when an interrupt is received. */
+
+static void
+monitor_interrupt_query ()
+{
+ target_terminal_ours ();
+
+ if (query ("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? "))
+ {
+ target_mourn_inferior ();
+ return_to_top_level (RETURN_QUIT);
+ }
+
+ target_terminal_inferior ();
+}
+
+static void
+monitor_wait_cleanup (old_timeout)
+ void *old_timeout;
+{
+ timeout = *(int*)old_timeout;
+ signal (SIGINT, ofunc);
+ in_monitor_wait = 0;
+}
+
+
+
+void monitor_wait_filter(char * buf,
+ int bufmax,
+ int * ext_resp_len,
+ struct target_waitstatus * status
+ )
+{
+ int resp_len ;
+ do
+ {
+ resp_len = monitor_expect_prompt (buf, bufmax);
+ * ext_resp_len =resp_len ;
+
+ if (resp_len <= 0)
+ fprintf_unfiltered (gdb_stderr, "monitor_wait: excessive response from monitor: %s.", buf);
+ }
+ while (resp_len < 0);
+
+ /* Print any output characters that were preceded by ^O. */
+ /* FIXME - This would be great as a user settabgle flag */
+ if (remote_debug ||
+ current_monitor->flags & MO_PRINT_PROGRAM_OUTPUT)
+ {
+ int i;
+
+ for (i = 0; i < resp_len - 1; i++)
+ if (buf[i] == 0x0f)
+ putchar_unfiltered (buf[++i]);
+ }
+}
+
+
+
+/* Wait until the remote machine stops, then return, storing status in
+ status just as `wait' would. */
+
+static int
monitor_wait (pid, status)
int pid;
struct target_waitstatus *status;
{
int old_timeout = timeout;
+ char buf[1024];
+ int resp_len;
+ struct cleanup *old_chain;
- debuglogs(1, "monitor_wait (), printing extraneous text.");
-
status->kind = TARGET_WAITKIND_EXITED;
status->value.integer = 0;
- timeout = 0; /* Don't time out -- user program is running. */
+ old_chain = make_cleanup (monitor_wait_cleanup, &old_timeout);
+ RDEBUG(("MON wait\n"))
+
+#if 0 /* MAINTENANCE_CMDS */
+ /* This is somthing other than a maintenance command */
+ in_monitor_wait = 1;
+ timeout = watchdog > 0 ? watchdog : -1;
+#else
+ timeout = -1; /* Don't time out -- user program is running. */
+#endif
+
+ ofunc = (void (*)()) signal (SIGINT, monitor_interrupt);
+
+ if (current_monitor->wait_filter)
+ (*current_monitor->wait_filter)(buf,sizeof (buf),&resp_len,status) ;
+ else monitor_wait_filter(buf,sizeof (buf),&resp_len,status) ;
+
+#if 0 /* Transferred to monitor wait filter */
+ do
+ {
+ resp_len = monitor_expect_prompt (buf, sizeof (buf));
+
+ if (resp_len <= 0)
+ fprintf_unfiltered (gdb_stderr, "monitor_wait: excessive response from monitor: %s.", buf);
+ }
+ while (resp_len < 0);
+
+ /* Print any output characters that were preceded by ^O. */
+ /* FIXME - This would be great as a user settabgle flag */
+ if (remote_debug ||
+ current_monitor->flags & MO_PRINT_PROGRAM_OUTPUT)
+ {
+ int i;
+
+ for (i = 0; i < resp_len - 1; i++)
+ if (buf[i] == 0x0f)
+ putchar_unfiltered (buf[++i]);
+ }
+#endif
+
+ signal (SIGINT, ofunc);
+
+ timeout = old_timeout;
+#if 0
+ if (dump_reg_flag && current_monitor->dump_registers)
+ {
+ dump_reg_flag = 0;
+ monitor_printf (current_monitor->dump_registers);
+ resp_len = monitor_expect_prompt (buf, sizeof (buf));
+ }
- expect_prompt(0); /* Wait for prompt, outputting extraneous text */
- debuglogs (4, "monitor_wait(), got the prompt.");
+ if (current_monitor->register_pattern)
+ parse_register_dump (buf, resp_len);
+#else
+ RDEBUG(("Wait fetching registers after stop\n")) ;
+ monitor_dump_regs() ;
+#endif
status->kind = TARGET_WAITKIND_STOPPED;
status->value.sig = TARGET_SIGNAL_TRAP;
- timeout = old_timeout;
+ discard_cleanups (old_chain);
- return 0;
+ in_monitor_wait = 0;
+
+ return inferior_pid;
}
-/* Return the name of register number regno in the form input and output by
- monitor. Currently, register_names just happens to contain exactly what
- monitor wants. Lets take advantage of that just as long as possible! */
+/* Fetch register REGNO, or all registers if REGNO is -1. Returns
+ errno value. */
-static char *
-get_reg_name (regno)
+static void
+monitor_fetch_register (regno)
int regno;
{
- static char buf[50];
- const char *p;
- char *b;
+ char *name;
+ static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+ char regbuf[MAX_REGISTER_RAW_SIZE * 2 + 1];
+ int i;
- b = buf;
+ name = current_monitor->regnames[regno];
+ RDEBUG(("MON fetchreg %d '%s'\n",regno,name))
- if (regno < 0)
- return ("");
+ if (!name || (*name == '\0'))
+ { RDEBUG(("No register known for %d\n",regno))
+ supply_register (regno, zerobuf);
+ return;
+ }
- for (p = REGNAMES(regno); *p; p++)
- *b++ = tolower(*p);
+ /* send the register examine command */
- *b = '\000';
+ monitor_printf (current_monitor->getreg.cmd, name);
- debuglogs (5, "Got name \"%s\" from regno #%d.", buf, regno);
+ /* If RESP_DELIM is specified, we search for that as a leading
+ delimiter for the register value. Otherwise, we just start
+ searching from the start of the buf. */
- return buf;
-}
+ if (current_monitor->getreg.resp_delim)
+ {
+ RDEBUG(("EXP getreg.resp_delim\n"))
+ monitor_expect (current_monitor->getreg.resp_delim, NULL, 0);
+ /* Handle case of first 32 registers listed in pairs. */
+ if (current_monitor->flags & MO_32_REGS_PAIRED
+ && regno & 1 == 1 && regno < 32)
+ { RDEBUG(("EXP getreg.resp_delim\n")) ;
+ monitor_expect (current_monitor->getreg.resp_delim, NULL, 0);
+ }
+ }
-/*
- * monitor_fetch_registers -- read the remote registers into the
- * block regs.
- */
-void
-monitor_fetch_registers ()
-{
- int regno;
+ /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set */
+ if (current_monitor->flags & MO_HEX_PREFIX)
+ {
+ int c;
+ c = readchar (timeout);
+ while (c == ' ')
+ c = readchar (timeout);
+ if ((c == '0') && ((c = readchar (timeout)) == 'x'))
+ ;
+ else
+ error ("Bad value returned from monitor while fetching register %x.",
+ regno);
+ }
- /* yeah yeah, i know this is horribly inefficient. but it isn't done
- very often... i'll clean it up later. */
+ /* Read upto the maximum number of hex digits for this register, skipping
+ spaces, but stop reading if something else is seen. Some monitors
+ like to drop leading zeros. */
- for (regno = 0; regno <= PC_REGNUM; regno++)
- monitor_fetch_register(regno);
-}
+ for (i = 0; i < REGISTER_RAW_SIZE (regno) * 2; i++)
+ {
+ int c;
+ c = readchar (timeout);
+ while (c == ' ')
+ c = readchar (timeout);
-/*
- * monitor_fetch_register -- fetch register REGNO, or all registers if REGNO
- * is -1. Returns errno value.
- */
-void
-monitor_fetch_register (regno)
- int regno;
-{
- int val, j;
+ if (!isxdigit (c))
+ break;
- debuglogs (1, "monitor_fetch_register (reg=%s)", get_reg_name (regno));
+ regbuf[i] = c;
+ }
- if (regno < 0) {
- monitor_fetch_registers ();
- } else {
- char *name = get_reg_name (regno);
- if (STREQ(name, ""))
- return;
- printf_monitor (ROMCMD(GET_REG), name); /* send the command */
- expect (name, 1); /* then strip the leading garbage */
- if (*ROMDELIM(GET_REG) != 0) { /* if there's a delimiter */
- expect (ROMDELIM(GET_REG), 1);
- }
-
- val = get_hex_word(); /* get the value, ignore junk */
- supply_register (regno, (char *) &val);
-
- if (*ROMDELIM(GET_REG) != 0) {
-/*** expect (ROMRES(GET_REG)); ***/
- printf_monitor (CMD_END);
- }
- expect_prompt (1);
- }
- return;
-}
+ regbuf[i] = '\000'; /* terminate the number */
+ RDEBUG(("REGVAL '%s'\n",regbuf)) ;
-/* Store the remote registers from the contents of the block REGS. */
+ /* If TERM is present, we wait for that to show up. Also, (if TERM
+ is present), we will send TERM_CMD if that is present. In any
+ case, we collect all of the output into buf, and then wait for
+ the normal prompt. */
-void
-monitor_store_registers ()
+ if (current_monitor->getreg.term)
+ {
+ RDEBUG(("EXP getreg.term\n"))
+ monitor_expect (current_monitor->getreg.term, NULL, 0); /* get response */
+ }
+
+ if (current_monitor->getreg.term_cmd)
+ { RDEBUG(("EMIT getreg.term.cmd\n"))
+ monitor_printf (current_monitor->getreg.term_cmd);
+ }
+ if (! current_monitor->getreg.term || /* Already expected or */
+ current_monitor->getreg.term_cmd) /* ack expected */
+ monitor_expect_prompt (NULL, 0); /* get response */
+
+ monitor_supply_register (regno, regbuf);
+}
+
+/* Sometimes, it takes several commands to dump the registers */
+/* This is a primitive for use by variations of monitor interfaces in
+ case they need to compose the operation.
+ */
+int monitor_dump_reg_block(char * block_cmd)
{
- int regno;
+ char buf[1024];
+ int resp_len;
+ monitor_printf (block_cmd);
+ resp_len = monitor_expect_prompt (buf, sizeof (buf));
+ parse_register_dump (buf, resp_len);
+ return 1 ;
+}
- debuglogs (1, "monitor_store_registers()");
- for (regno = 0; regno <= PC_REGNUM; regno++)
- monitor_store_register(regno);
+/* Read the remote registers into the block regs. */
+/* Call the specific function if it has been provided */
- registers_changed ();
+static void
+monitor_dump_regs ()
+{
+ char buf[1024];
+ int resp_len;
+ if (current_monitor->dumpregs)
+ (*(current_monitor->dumpregs))() ; /* call supplied function */
+ else
+ if (current_monitor->dump_registers) /* default version */
+ { monitor_printf (current_monitor->dump_registers);
+ resp_len = monitor_expect_prompt (buf, sizeof (buf));
+ parse_register_dump (buf, resp_len);
+ }
+ else
+ abort(); /* Need some way to read registers */
}
-/*
- * monitor_store_register -- store register REGNO, or all if REGNO == 0.
- * return errno value.
- */
-void
+static void
+monitor_fetch_registers (regno)
+ int regno;
+{
+ RDEBUG(("MON fetchregs\n")) ;
+ if (current_monitor->getreg.cmd)
+ {
+ if (regno >= 0)
+ {
+ monitor_fetch_register (regno);
+ return;
+ }
+
+ for (regno = 0; regno < NUM_REGS; regno++)
+ monitor_fetch_register (regno);
+ }
+ else {
+ monitor_dump_regs ();
+ }
+}
+
+/* Store register REGNO, or all if REGNO == 0. Return errno value. */
+
+static void
monitor_store_register (regno)
int regno;
{
char *name;
- int i;
+ unsigned int val;
- i = read_register(regno);
+ name = current_monitor->regnames[regno];
+ if (!name || (*name == '\0'))
+ { RDEBUG(("MON Cannot store unknown register\n"))
+ return;
+ }
- debuglogs (1, "monitor_store_register (regno=%d)", regno);
+ val = read_register (regno);
+ RDEBUG(("MON storeg %d %08x\n",regno,(unsigned int)val))
- if (regno < 0)
- monitor_store_registers ();
- else {
- debuglogs (3, "Setting register %s to 0x%x", get_reg_name (regno), read_register (regno));
-
- name = get_reg_name (regno);
- if (STREQ(name, ""))
+ /* send the register deposit command */
+
+ if (current_monitor->flags & MO_REGISTER_VALUE_FIRST)
+ monitor_printf (current_monitor->setreg.cmd, val, name);
+ else if (current_monitor->flags & MO_SETREG_INTERACTIVE)
+ monitor_printf (current_monitor->setreg.cmd, name);
+ else
+ monitor_printf (current_monitor->setreg.cmd, name, val);
+
+ if (current_monitor->setreg.term)
+ { RDEBUG(("EXP setreg.term\n"))
+ monitor_expect (current_monitor->setreg.term, NULL, 0);
+ if (current_monitor->flags & MO_SETREG_INTERACTIVE)
+ monitor_printf ("%x\r", val);
+ monitor_expect_prompt (NULL, 0);
+ }
+ else
+ monitor_expect_prompt (NULL, 0);
+ if (current_monitor->setreg.term_cmd) /* Mode exit required */
+ { RDEBUG(("EXP setreg_termcmd\n")) ;
+ monitor_printf("%s",current_monitor->setreg.term_cmd) ;
+ monitor_expect_prompt(NULL,0) ;
+ }
+} /* monitor_store_register */
+
+/* Store the remote registers. */
+
+static void
+monitor_store_registers (regno)
+ int regno;
+{
+ if (regno >= 0)
+ {
+ monitor_store_register (regno);
return;
- printf_monitor (ROMCMD(SET_REG), name, read_register(regno));
- expect (name, 1); /* strip the leading garbage */
- if (*ROMDELIM(SET_REG) != 0) { /* if there's a delimiter */
- expect (ROMDELIM(SET_REG), 1);
- get_hex_word(1);
- printf_monitor ("%d%s\n", i, CMD_END);
- }
- expect_prompt (1);
- }
- return;
-
-#if 0
- printf_monitor (SET_REG, get_reg_name (regno),
- read_register (regno));
- expect_prompt (1);
}
-#endif
+
+ for (regno = 0; regno < NUM_REGS; regno++)
+ monitor_store_register (regno);
}
/* Get ready to modify the registers array. On machines which store
that registers contains all the registers from the program being
debugged. */
-void
+static void
monitor_prepare_to_store ()
{
/* Do nothing, since we can store individual regs */
}
-void
-monitor_files_info ()
+static void
+monitor_files_info (ops)
+ struct target_ops *ops;
{
- printf ("\tAttached to %s at %d baud.\n",
- dev_name, baudrate);
+ printf_unfiltered ("\tAttached to %s at %d baud.\n", dev_name, baud_rate);
}
-/*
- * monitor_write_inferior_memory -- Copy LEN bytes of data from debugger
- * memory at MYADDR to inferior's memory at MEMADDR. Returns length moved.
- */
-int
-monitor_write_inferior_memory (memaddr, myaddr, len)
+static int
+monitor_write_memory (memaddr, myaddr, len)
CORE_ADDR memaddr;
- unsigned char *myaddr;
+ char *myaddr;
int len;
{
+ unsigned int val, hostval ;
+ char *cmd;
int i;
- char buf[10];
- debuglogs (1, "monitor_write_inferior_memory (memaddr=0x%x, myaddr=0x%x, len=%d)", memaddr, myaddr, len);
+ RDEBUG(("MON write %d %08x\n",len,(unsigned long)memaddr))
+
+ if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
+ memaddr = ADDR_BITS_REMOVE (memaddr);
+
+ /* Use memory fill command for leading 0 bytes. */
- for (i = 0; i < len; i++) {
- printf_monitor (ROMCMD(SET_MEM), memaddr + i, myaddr[i] );
- if (*ROMDELIM(SET_MEM) != 0) { /* if there's a delimiter */
- expect (ROMDELIM(SET_MEM), 1);
- expect (CMD_DELIM);
- printf_monitor ("%x", myaddr[i]);
+ if (current_monitor->fill)
+ {
+ for (i = 0; i < len; i++)
+ if (myaddr[i] != 0)
+ break;
+
+ if (i > 4) /* More than 4 zeros is worth doing */
+ {
+ RDEBUG(("MON FILL %d\n",i))
+ if (current_monitor->flags & MO_FILL_USES_ADDR)
+ monitor_printf (current_monitor->fill, memaddr, (memaddr + i)-1, 0);
+ else
+ monitor_printf (current_monitor->fill, memaddr, i, 0);
+
+ monitor_expect_prompt (NULL, 0);
+
+ return i;
+ }
}
-/*** printf_monitor ("%x", myaddr[i]); ***/
- if (sr_get_debug() > 1)
- printf ("\nSet 0x%x to 0x%x\n", memaddr + i, myaddr[i]);
- if (*ROMDELIM(SET_MEM) != 0) {
- expect (CMD_DELIM);
- printf_monitor (CMD_END);
+
+#if 0
+ /* Can't actually use long longs if VAL is an int (nice idea, though). */
+ if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->setmem.cmdll)
+ {
+ len = 8;
+ cmd = current_monitor->setmem.cmdll;
}
- expect_prompt (1);
- }
+ else
+#endif
+ if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->setmem.cmdl)
+ {
+ len = 4;
+ cmd = current_monitor->setmem.cmdl;
+ }
+ else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->setmem.cmdw)
+ {
+ len = 2;
+ cmd = current_monitor->setmem.cmdw;
+ }
+ else
+ {
+ len = 1;
+ cmd = current_monitor->setmem.cmdb;
+ }
+
+ val = extract_unsigned_integer (myaddr, len);
+
+ if (len == 4)
+ { hostval = * (unsigned int *) myaddr ;
+ RDEBUG(("Hostval(%08x) val(%08x)\n",hostval,val)) ;
+ }
+
+
+ if (current_monitor->flags & MO_NO_ECHO_ON_SETMEM)
+ monitor_printf_noecho (cmd, memaddr, val);
+ else if (current_monitor->flags & MO_SETMEM_INTERACTIVE)
+ {
+
+ monitor_printf_noecho (cmd, memaddr);
+
+ if (current_monitor->setmem.term)
+ { RDEBUG(("EXP setmem.term")) ;
+ monitor_expect (current_monitor->setmem.term, NULL, 0);
+ monitor_printf ("%x\r", val);
+ }
+ if (current_monitor->setmem.term_cmd)
+ { /* Emit this to get out of the memory editing state */
+ monitor_printf("%s",current_monitor->setmem.term_cmd) ;
+ /* Drop through to expecting a prompt */
+ }
+ }
+ else
+ monitor_printf (cmd, memaddr, val);
+
+ monitor_expect_prompt (NULL, 0);
+
return len;
}
-/*
- * monitor_read_inferior_memory -- read LEN bytes from inferior memory
- * at MEMADDR. Put the result at debugger address MYADDR. Returns
- * length moved.
- */
-int
-monitor_read_inferior_memory(memaddr, myaddr, len)
+
+static int
+monitor_write_even_block(memaddr,myaddr,len)
+ CORE_ADDR memaddr ;
+ char * myaddr ;
+ int len ;
+{
+ unsigned int val ;
+ int written = 0 ;;
+ /* Enter the sub mode */
+ monitor_printf(current_monitor->setmem.cmdl,memaddr) ;
+ monitor_expect_prompt(NULL,0) ;
+
+ while (len)
+ {
+ val = extract_unsigned_integer(myaddr,4) ; /* REALLY */
+ monitor_printf("%x\r",val) ;
+ myaddr += 4 ;
+ memaddr += 4 ;
+ written += 4 ;
+ RDEBUG((" @ %08x\n",memaddr))
+ /* If we wanted to, here we could validate the address */
+ monitor_expect_prompt(NULL,0) ;
+ }
+ /* Now exit the sub mode */
+ monitor_printf (current_monitor->getreg.term_cmd);
+ monitor_expect_prompt(NULL,0) ;
+ return written ;
+}
+
+
+static int monitor_write_memory_bytes(memaddr,myaddr,len)
+ CORE_ADDR memaddr ;
+ char * myaddr ;
+ int len ;
+{
+ unsigned char val ;
+ int written = 0 ;
+ if (len == 0) return 0 ;
+ /* Enter the sub mode */
+ monitor_printf(current_monitor->setmem.cmdb,memaddr) ;
+ monitor_expect_prompt(NULL,0) ;
+ while (len)
+ {
+ val = *myaddr ;
+ monitor_printf("%x\r",val) ;
+ myaddr++ ;
+ memaddr++ ;
+ written++ ;
+ /* If we wanted to, here we could validate the address */
+ monitor_expect_prompt(NULL,0) ;
+ len-- ;
+ }
+ /* Now exit the sub mode */
+ monitor_printf (current_monitor->getreg.term_cmd);
+ monitor_expect_prompt(NULL,0) ;
+ return written ;
+}
+
+
+static void
+longlongendswap (unsigned char * a)
+{
+ int i,j ;
+ unsigned char x ;
+ i = 0 ; j = 7 ;
+ while (i < 4)
+ { x = *(a+i) ;
+ *(a+i) = *(a+j) ;
+ *(a+j) = x ;
+ i++ , j-- ;
+ }
+}
+/* Format 32 chars of long long value, advance the pointer */
+static char * hexlate = "0123456789abcdef" ;
+static char * longlong_hexchars(unsigned long long value,
+ char * outbuff )
+{
+ if (value == 0) { *outbuff++ = '0' ; return outbuff ; }
+ else
+ { static unsigned char disbuf[8] ; /* disassembly buffer */
+ unsigned char * scan , * limit ; /* loop controls */
+ unsigned char c , nib ;
+ int leadzero = 1 ;
+ scan = disbuf ; limit = scan + 8 ;
+ { unsigned long long * dp ;
+ dp = (unsigned long long *) scan ;
+ *dp = value ;
+ }
+ longlongendswap(disbuf) ; /* FIXME: ONly on big endian hosts */
+ while (scan < limit)
+ { c = *scan++ ; /* a byte of our long long value */
+ if (leadzero)
+ if (c == 0) continue ;
+ else leadzero = 0 ; /* henceforth we print even zeroes */
+ nib = c >> 4 ; /* high nibble bits */
+ *outbuff++ = hexlate[nib] ;
+ nib = c & 0x0f ; /* low nibble bits */
+ *outbuff++ = hexlate[nib] ;
+ }
+ return outbuff ;
+ }
+} /* longlong_hexchars */
+
+
+
+/* I am only going to call this when writing virtual byte streams.
+ Which possably entails endian conversions
+ */
+static int monitor_write_memory_longlongs(memaddr,myaddr,len)
+ CORE_ADDR memaddr ;
+ char * myaddr ;
+ int len ;
+{
+ static char hexstage[20] ; /* At least 16 digits required, plus null */
+ char * endstring ;
+ long long * llptr ;
+ long long value ;
+ int written = 0 ;
+ llptr = (unsigned long long *) myaddr ;
+ if (len == 0 ) return 0 ;
+ monitor_printf(current_monitor->setmem.cmdll,memaddr) ;
+ monitor_expect_prompt(NULL,0) ;
+ while (len >= 8 )
+ {
+ value = *llptr ;
+ endstring = longlong_hexchars(*llptr,hexstage) ;
+ *endstring = '\0' ; /* NUll terminate for printf */
+ monitor_printf("%s\r",hexstage) ;
+ llptr++ ;
+ memaddr += 8 ;
+ written += 8 ;
+ /* If we wanted to, here we could validate the address */
+ monitor_expect_prompt(NULL,0) ;
+ len -= 8 ;
+ }
+ /* Now exit the sub mode */
+ monitor_printf (current_monitor->getreg.term_cmd);
+ monitor_expect_prompt(NULL,0) ;
+ return written ;
+} /* */
+
+
+
+/* ----- MONITOR_WRITE_MEMORY_BLOCK ---------------------------- */
+/* This is for the large blocks of memory which may occur in downloading.
+ And for monitors which use interactive entry,
+ And for monitors which do not have other downloading methods.
+ Without this, we will end up calling monitor_write_memory many times
+ and do the entry and exit of the sub mode many times
+ This currently assumes...
+ MO_SETMEM_INTERACTIVE
+ ! MO_NO_ECHO_ON_SETMEM
+ To use this, the you have to patch the monitor_cmds block with
+ this function. Otherwise, its not tuned up for use by all
+ monitor variations.
+ */
+
+static int monitor_write_memory_block(memaddr,myaddr,len)
+ CORE_ADDR memaddr ;
+ char * myaddr ;
+ int len ;
+{
+ int written ;
+ written = 0 ;
+ /* FIXME: This would be a good place to put the zero test */
+#if 1
+ if ((len > 8) && (((len & 0x07)) == 0) && current_monitor->setmem.cmdll)
+ {
+ return monitor_write_memory_longlongs(memaddr,myaddr,len) ;
+ }
+#endif
+#if 0
+ if (len > 4)
+ {
+ int sublen ;
+ written = monitor_write_even_block(memaddr,myaddr,len) ;
+ /* Adjust calling parameters by written amount */
+ memaddr += written ;
+ myaddr += written ;
+ len -= written ;
+ }
+#endif
+ written = monitor_write_memory_bytes(memaddr,myaddr,len) ;
+ return written ;
+}
+
+/* This is an alternate form of monitor_read_memory which is used for monitors
+ which can only read a single byte/word/etc. at a time. */
+
+static int
+monitor_read_memory_single (memaddr, myaddr, len)
CORE_ADDR memaddr;
char *myaddr;
int len;
{
- int i, j;
- char buf[20];
-
- /* Number of bytes read so far. */
- int count;
-
- /* Starting address of this pass. */
- unsigned long startaddr;
-
- /* Number of bytes to read in this pass. */
- int len_this_pass;
-
- debuglogs (1, "monitor_read_inferior_memory (memaddr=0x%x, myaddr=0x%x, len=%d)", memaddr, myaddr, len);
-
- /* Note that this code works correctly if startaddr is just less
- than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
- thing). That is, something like
- monitor_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
- works--it never adds len To memaddr and gets 0. */
- /* However, something like
- monitor_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
- doesn't need to work. Detect it and give up if there's an attempt
- to do that. */
- if (((memaddr - 1) + len) < memaddr) {
- errno = EIO;
- return 0;
- }
-
- startaddr = memaddr;
- count = 0;
- while (count < len) {
- len_this_pass = 16;
- if ((startaddr % 16) != 0)
- len_this_pass -= startaddr % 16;
- if (len_this_pass > (len - count))
- len_this_pass = (len - count);
-
- debuglogs (3, "Display %d bytes at %x", len_this_pass, startaddr);
-
- for (i = 0; i < len_this_pass; i++) {
- printf_monitor (ROMCMD(GET_MEM), startaddr, startaddr);
- sprintf (buf, ROMCMD(GET_MEM), startaddr, startaddr);
- if (*ROMDELIM(GET_MEM) != 0) { /* if there's a delimiter */
- expect (ROMDELIM(GET_MEM), 1);
- } else {
- sprintf (buf, ROMCMD(GET_MEM), startaddr, startaddr);
- expect (buf,1); /* get the command echo */
- get_hex_word(1); /* strip away the address */
- }
- get_hex_byte (&myaddr[count++]); /* get the value at this address */
+ unsigned int val;
+ char membuf[sizeof(int) * 2 + 1];
+ char *p;
+ char *cmd;
+ int i;
- if (*ROMDELIM(GET_MEM) != 0) {
- printf_monitor (CMD_END);
- }
- expect_prompt (1);
- startaddr += 1;
+ RDEBUG(("MON read single\n")) ;
+#if 0
+ /* Can't actually use long longs (nice idea, though). In fact, the
+ call to strtoul below will fail if it tries to convert a value
+ that's too big to fit in a long. */
+ if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->getmem.cmdll)
+ {
+ len = 8;
+ cmd = current_monitor->getmem.cmdll;
}
- }
+ else
+#endif
+ if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->getmem.cmdl)
+ {
+ len = 4;
+ cmd = current_monitor->getmem.cmdl;
+ }
+ else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->getmem.cmdw)
+ {
+ len = 2;
+ cmd = current_monitor->getmem.cmdw;
+ }
+ else
+ {
+ len = 1;
+ cmd = current_monitor->getmem.cmdb;
+ }
+
+ /* Send the examine command. */
+
+ monitor_printf (cmd, memaddr);
+
+ /* If RESP_DELIM is specified, we search for that as a leading
+ delimiter for the memory value. Otherwise, we just start
+ searching from the start of the buf. */
+
+ if (current_monitor->getmem.resp_delim)
+ { RDEBUG(("EXP getmem.resp_delim\n")) ;
+ monitor_expect_regexp (&getmem_resp_delim_pattern, NULL, 0);
+ }
+
+ /* Now, read the appropriate number of hex digits for this loc,
+ skipping spaces. */
+
+ /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set. */
+ if (current_monitor->flags & MO_HEX_PREFIX)
+ {
+ int c;
+
+ c = readchar (timeout);
+ while (c == ' ')
+ c = readchar (timeout);
+ if ((c == '0') && ((c = readchar (timeout)) == 'x'))
+ ;
+ else
+ monitor_error ("monitor_read_memory_single (0x%x): bad response from monitor: %.*s%c.",
+ memaddr, i, membuf, c);
+ }
+ for (i = 0; i < len * 2; i++)
+ {
+ int c;
+
+ while (1)
+ {
+ c = readchar (timeout);
+ if (isxdigit (c))
+ break;
+ if (c == ' ')
+ continue;
+
+ monitor_error ("monitor_read_memory_single (0x%x): bad response from monitor: %.*s%c.",
+ memaddr, i, membuf, c);
+ }
+
+ membuf[i] = c;
+ }
+
+ membuf[i] = '\000'; /* terminate the number */
+
+/* If TERM is present, we wait for that to show up. Also, (if TERM is
+ present), we will send TERM_CMD if that is present. In any case, we collect
+ all of the output into buf, and then wait for the normal prompt. */
+
+ if (current_monitor->getmem.term)
+ {
+ monitor_expect (current_monitor->getmem.term, NULL, 0); /* get response */
+
+ if (current_monitor->getmem.term_cmd)
+ {
+ monitor_printf (current_monitor->getmem.term_cmd);
+ monitor_expect_prompt (NULL, 0);
+ }
+ }
+ else
+ monitor_expect_prompt (NULL, 0); /* get response */
+
+ p = membuf;
+ val = strtoul (membuf, &p, 16);
+
+ if (val == 0 && membuf == p)
+ monitor_error ("monitor_read_memory_single (0x%x): bad value from monitor: %s.",
+ memaddr, 0, membuf, 0);
+
+ /* supply register stores in target byte order, so swap here */
+
+ store_unsigned_integer (myaddr, len, val);
+
return len;
}
-/* FIXME-someday! merge these two. */
-int
-monitor_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+/* Copy LEN bytes of data from debugger memory at MYADDR to inferior's
+ memory at MEMADDR. Returns length moved. Currently, we do no more
+ than 16 bytes at a time. */
+
+static int
+monitor_read_memory (memaddr, myaddr, len)
+ CORE_ADDR memaddr;
+ char *myaddr;
+ int len;
+{
+ unsigned int val;
+ char buf[512];
+ char *p, *p1;
+ int resp_len;
+ int i;
+ CORE_ADDR dumpaddr;
+
+ if (len <= 0)
+ {
+ RDEBUG (("Zero length call to monitor_read_memory\n"));
+ return 0;
+ }
+
+ if (remote_debug) printf("MON read block ta(%08x) ha(%08x) %d\n",
+ (unsigned long) memaddr , (unsigned long)myaddr, len);
+
+ if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
+ memaddr = ADDR_BITS_REMOVE (memaddr);
+
+ if (current_monitor->flags & MO_GETMEM_READ_SINGLE)
+ return monitor_read_memory_single (memaddr, myaddr, len);
+
+ len = min (len, 16);
+
+ /* Some dumpers align the first data with the preceeding 16
+ byte boundary. Some print blanks and start at the
+ requested boundary. EXACT_DUMPADDR
+ */
+
+ dumpaddr = (current_monitor->flags & MO_EXACT_DUMPADDR)
+ ? memaddr : memaddr & ~ 0x0f ;
+
+ /* See if xfer would cross a 16 byte boundary. If so, clip it. */
+ if (((memaddr ^ (memaddr + len - 1)) & ~0xf) != 0)
+ len = ((memaddr + len) & ~0xf) - memaddr;
+
+ /* send the memory examine command */
+
+ if (current_monitor->flags & MO_GETMEM_NEEDS_RANGE)
+ monitor_printf (current_monitor->getmem.cmdb, memaddr, memaddr + len - 1);
+ else if (current_monitor->flags & MO_GETMEM_16_BOUNDARY)
+ monitor_printf (current_monitor->getmem.cmdb, dumpaddr);
+ else
+ monitor_printf (current_monitor->getmem.cmdb, memaddr, len);
+
+ /* If TERM is present, we wait for that to show up. Also, (if TERM
+ is present), we will send TERM_CMD if that is present. In any
+ case, we collect all of the output into buf, and then wait for
+ the normal prompt. */
+
+ if (current_monitor->getmem.term)
+ {
+ resp_len = monitor_expect (current_monitor->getmem.term, buf, sizeof buf); /* get response */
+
+ if (resp_len <= 0)
+ monitor_error ("monitor_read_memory (0x%x): excessive response from monitor: %.*s.",
+ memaddr, resp_len, buf, 0);
+
+ if (current_monitor->getmem.term_cmd)
+ {
+ SERIAL_WRITE (monitor_desc, current_monitor->getmem.term_cmd,
+ strlen (current_monitor->getmem.term_cmd));
+ monitor_expect_prompt (NULL, 0);
+ }
+ }
+ else
+ resp_len = monitor_expect_prompt (buf, sizeof buf); /* get response */
+
+ p = buf;
+
+ /* If RESP_DELIM is specified, we search for that as a leading
+ delimiter for the values. Otherwise, we just start searching
+ from the start of the buf. */
+
+ if (current_monitor->getmem.resp_delim)
+ {
+ int retval, tmp;
+ struct re_registers resp_strings;
+ RDEBUG(("MON getmem.resp_delim %s\n",current_monitor->getmem.resp_delim)) ;
+
+ memset (&resp_strings, 0, sizeof (struct re_registers));
+ tmp = strlen (p);
+ retval = re_search (&getmem_resp_delim_pattern, p, tmp, 0, tmp,
+ &resp_strings);
+
+ if (retval < 0)
+ monitor_error ("monitor_read_memory (0x%x): bad response from monitor: %.*s.",
+ memaddr, resp_len, buf, 0);
+
+ p += resp_strings.end[0];
+#if 0
+ p = strstr (p, current_monitor->getmem.resp_delim);
+ if (!p)
+ monitor_error ("monitor_read_memory (0x%x): bad response from monitor: %.*s.",
+ memaddr, resp_len, buf, 0);
+ p += strlen (current_monitor->getmem.resp_delim);
+#endif
+ }
+ if (remote_debug) printf("MON scanning %d ,%08x '%s'\n",len,p,p) ;
+ if (current_monitor->flags & MO_GETMEM_16_BOUNDARY)
+ {
+ char c ;
+ int fetched = 0 ;
+ i = len;
+ c = *p ;
+
+
+ while (!(c == '\000' || c == '\n' || c == '\r') && i > 0)
+ { if (isxdigit (c))
+ { if ((dumpaddr >= memaddr) && (i > 0))
+ { val = fromhex (c) * 16 + fromhex (*(p+1));
+ *myaddr++ = val;
+ if (remote_debug) printf("[%02x]",val) ;
+ --i;
+ fetched++ ;
+ }
+ ++dumpaddr;
+ ++p;
+ }
+ ++p; /* skip a blank or other non hex char */
+ c = *p ;
+ }
+ if (fetched == 0) error("Failed to read via monitor") ;
+ if (remote_debug) printf("\n") ;
+ return fetched ; /* Return the number of bytes actually read */
+ }
+ RDEBUG(("MON scanning bytes\n")) ;
+
+ for (i = len; i > 0; i--)
+ {
+ /* Skip non-hex chars, but bomb on end of string and newlines */
+
+ while (1)
+ {
+ if (isxdigit (*p))
+ break;
+
+ if (*p == '\000' || *p == '\n' || *p == '\r')
+ monitor_error ("monitor_read_memory (0x%x): badly terminated response from monitor: %.*s",
+ memaddr, resp_len, buf, 0);
+ p++;
+ }
+
+ val = strtoul (p, &p1, 16);
+
+ if (val == 0 && p == p1)
+ monitor_error ("monitor_read_memory (0x%x): bad value from monitor: %.*s.",
+ memaddr, resp_len, buf, 0);
+
+ *myaddr++ = val;
+
+ if (i == 1)
+ break;
+
+ p = p1;
+ }
+
+ return len;
+}
+
+static int
+monitor_xfer_memory (memaddr, myaddr, len, write, target)
CORE_ADDR memaddr;
char *myaddr;
int len;
int write;
struct target_ops *target; /* ignored */
{
- if (write)
- return monitor_write_inferior_memory (memaddr, myaddr, len);
- else
- return monitor_read_inferior_memory (memaddr, myaddr, len);
+ return dcache_xfer_memory (remote_dcache, memaddr, myaddr, len, write);
}
-void
-monitor_kill (args, from_tty)
- char *args;
- int from_tty;
+static void
+monitor_kill ()
{
return; /* ignore attempts to kill target system */
}
+/* All we actually do is set the PC to the start address of exec_bfd, and start
+ the program at that point. */
+
+static void
+monitor_create_inferior (exec_file, args, env)
+ char *exec_file;
+ char *args;
+ char **env;
+{
+ if (args && (*args != '\000'))
+ error ("Args are not supported by the monitor.");
+
+ first_time = 1;
+ clear_proceed_status ();
+ proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0);
+}
+
/* Clean up when a program exits.
The program actually lives on in the remote processor's RAM, and may be
run again without a download. Don't leave it full of breakpoint
instructions. */
-void
+static void
monitor_mourn_inferior ()
{
- remove_breakpoints ();
+ unpush_target (targ_ops);
generic_mourn_inferior (); /* Do all the proper things now */
}
-#define MAX_MONITOR_BREAKPOINTS 16
+#define NUM_MONITOR_BREAKPOINTS 8
-extern int memory_breakpoint_size;
-static CORE_ADDR breakaddr[MAX_MONITOR_BREAKPOINTS] = {0};
+static CORE_ADDR breakaddr[NUM_MONITOR_BREAKPOINTS] = {0};
-/*
- * monitor_insert_breakpoint -- add a breakpoint
- */
-int
+/* Tell the monitor to add a breakpoint. */
+
+static int
monitor_insert_breakpoint (addr, shadow)
CORE_ADDR addr;
char *shadow;
{
int i;
+ unsigned char *bp;
+ int bplen;
- debuglogs (1, "monitor_insert_breakpoint() addr = 0x%x", addr);
+ RDEBUG(("MON inst bkpt %08x\n",addr))
+ if (current_monitor->set_break == NULL)
+ error ("No set_break defined for this monitor");
- for (i = 0; i <= MAX_MONITOR_BREAKPOINTS; i++) {
- if (breakaddr[i] == 0) {
- breakaddr[i] = addr;
- if (sr_get_debug() > 4)
- printf ("Breakpoint at %x\n", addr);
- monitor_read_inferior_memory(addr, shadow, memory_breakpoint_size);
- printf_monitor(SET_BREAK_CMD, addr);
- expect_prompt(1);
- return 0;
+ if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
+ addr = ADDR_BITS_REMOVE (addr);
+
+ /* Determine appropriate breakpoint size for this address. */
+ bp = memory_breakpoint_from_pc (&addr, &bplen);
+
+ for (i = 0; i < NUM_MONITOR_BREAKPOINTS; i++)
+ {
+ if (breakaddr[i] == 0)
+ {
+ breakaddr[i] = addr;
+ monitor_read_memory (addr, shadow, bplen);
+ monitor_printf (current_monitor->set_break, addr);
+ monitor_expect_prompt (NULL, 0);
+ return 0;
+ }
}
- }
- fprintf(stderr, "Too many breakpoints (> 16) for monitor\n");
- return 1;
+ error ("Too many breakpoints (> %d) for monitor.", NUM_MONITOR_BREAKPOINTS);
}
-/*
- * _remove_breakpoint -- Tell the monitor to remove a breakpoint
- */
-int
+/* Tell the monitor to remove a breakpoint. */
+
+static int
monitor_remove_breakpoint (addr, shadow)
CORE_ADDR addr;
char *shadow;
{
int i;
- debuglogs (1, "monitor_remove_breakpoint() addr = 0x%x", addr);
+ RDEBUG(("MON rmbkpt %08x\n",addr))
+ if (current_monitor->clr_break == NULL)
+ error ("No clr_break defined for this monitor");
- for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++) {
- if (breakaddr[i] == addr) {
- breakaddr[i] = 0;
- /* some monitors remove breakpoints based on the address */
- if (CLR_BREAK_ADDR)
- printf_monitor(CLR_BREAK_CMD, addr);
- else
- printf_monitor(CLR_BREAK_CMD, i);
- expect_prompt(1);
- return 0;
+ if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
+ addr = ADDR_BITS_REMOVE (addr);
+
+ for (i = 0; i < NUM_MONITOR_BREAKPOINTS; i++)
+ {
+ if (breakaddr[i] == addr)
+ {
+ breakaddr[i] = 0;
+ /* some monitors remove breakpoints based on the address */
+ if (current_monitor->flags & MO_CLR_BREAK_USES_ADDR)
+ monitor_printf (current_monitor->clr_break, addr);
+ else if (current_monitor->flags & MO_CLR_BREAK_1_BASED)
+ monitor_printf (current_monitor->clr_break, i + 1);
+ else
+ monitor_printf (current_monitor->clr_break, i);
+ monitor_expect_prompt (NULL, 0);
+ return 0;
+ }
}
- }
- fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr);
+ fprintf_unfiltered (gdb_stderr,
+ "Can't find breakpoint associated with 0x%x\n", addr);
return 1;
}
-/* Load a file. This is usually an srecord, which is ascii. No
- protocol, just sent line by line. */
+/* monitor_wait_srec_ack -- wait for the target to send an acknowledgement for
+ an S-record. Return non-zero if the ACK is received properly. */
-#define DOWNLOAD_LINE_SIZE 100
-void
-monitor_load (arg)
- char *arg;
+static int
+monitor_wait_srec_ack ()
{
- FILE *download;
- char buf[DOWNLOAD_LINE_SIZE];
- int i, bytes_read;
-
- if (sr_get_debug())
- printf ("Loading %s to monitor\n", arg);
+ int i, ch;
- download = fopen (arg, "r");
- if (download == NULL)
+ if (current_monitor->flags & MO_SREC_ACK_PLUS)
{
- error (sprintf (buf, "%s Does not exist", arg));
- return;
- }
+ return (readchar (timeout) == '+');
+ }
+ else if (current_monitor->flags & MO_SREC_ACK_ROTATE)
+ {
+ /* Eat two backspaces, a "rotating" char (|/-\), and a space. */
+ if ((ch = readchar (1)) < 0)
+ return 0;
+ if ((ch = readchar (1)) < 0)
+ return 0;
+ if ((ch = readchar (1)) < 0)
+ return 0;
+ if ((ch = readchar (1)) < 0)
+ return 0;
+ }
+ return 1;
+}
- printf_monitor (LOAD_CMD);
-/* expect ("Waiting for S-records from host... ", 1); */
+/* monitor_load -- download a file. */
- while (!feof (download))
- {
- bytes_read = fread (buf, sizeof (char), DOWNLOAD_LINE_SIZE, download);
- if (hashmark)
- {
- putchar ('.');
- fflush (stdout);
- }
+static void
+monitor_load (file, from_tty)
+ char *file;
+ int from_tty;
+{
+ dcache_flush (remote_dcache);
+ RDEBUG(("MON load\n"))
- if (SERIAL_WRITE(monitor_desc, buf, bytes_read)) {
- fprintf(stderr, "SERIAL_WRITE failed: (while downloading) %s\n", safe_strerror(errno));
- break;
- }
- i = 0;
- while (i++ <=200000) {} ; /* Ugly HACK, probably needs flow control */
- if (bytes_read < DOWNLOAD_LINE_SIZE)
- {
- if (!feof (download))
- error ("Only read %d bytes\n", bytes_read);
- break;
- }
- }
+ if (current_monitor->load_routine)
+ current_monitor->load_routine (monitor_desc, file, hashmark);
+ else
+ { /* The default is ascii S-records */
+ int n;
+ unsigned long load_offset;
+ char buf[128];
+
+ /* enable user to specify address for downloading as 2nd arg to load */
+ n = sscanf (file, "%s 0x%lx", buf, &load_offset);
+ if (n > 1)
+ file = buf;
+ else
+ load_offset = 0;
- if (hashmark)
- {
- putchar ('\n');
+ monitor_printf (current_monitor->load);
+ if (current_monitor->loadresp)
+ monitor_expect (current_monitor->loadresp, NULL, 0);
+
+ load_srec (monitor_desc, file, (bfd_vma) load_offset,
+ 32, SREC_ALL, hashmark,
+ current_monitor->flags & MO_SREC_ACK ?
+ monitor_wait_srec_ack : NULL);
+
+ monitor_expect_prompt (NULL, 0);
}
- if (!feof (download))
- error ("Never got EOF while downloading");
- fclose (download);
+
+/* Finally, make the PC point at the start address */
+
+ if (exec_bfd)
+ write_pc (bfd_get_start_address (exec_bfd));
+
+ inferior_pid = 0; /* No process now */
+
+/* This is necessary because many things were based on the PC at the time that
+ we attached to the monitor, which is no longer valid now that we have loaded
+ new code (and just changed the PC). Another way to do this might be to call
+ normal_stop, except that the stack may not be valid, and things would get
+ horribly confused... */
+
+ clear_symtab_users ();
}
-/*
- * monitor_command -- put a command string, in args, out to MONITOR.
- * Output from MONITOR is placed on the users terminal until the
- * prompt is seen. FIXME: We read the charcters ourseleves here
- * cause of a nasty echo.
- */
-void
-monitor_command (args, fromtty)
- char *args;
- int fromtty;
+static void
+monitor_stop ()
{
+ RDEBUG(("MON stop\n")) ;
+ if ((current_monitor->flags & MO_SEND_BREAK_ON_STOP) != 0)
+ SERIAL_SEND_BREAK (monitor_desc);
+ if (current_monitor->stop)
+ monitor_printf_noecho (current_monitor->stop);
+}
- char *p;
- char c, cp;
- p = PROMPT;
+/* Put a command string, in args, out to MONITOR. Output from MONITOR
+ is placed on the users terminal until the prompt is seen. FIXME: We
+ read the characters ourseleves here cause of a nasty echo. */
- debuglogs (1, "monitor_command (args=%s)", args);
+static void
+monitor_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ char *p;
+ int resp_len;
+ char buf[1000];
if (monitor_desc == NULL)
- error("monitor target not open.");
+ error ("monitor target not open.");
- if (!args)
- error("Missing command.");
-
- printf_monitor ("%s\n", args);
+ p = current_monitor->prompt;
+
+ /* Send the command. Note that if no args were supplied, then we're
+ just sending the monitor a newline, which is sometimes useful. */
+
+ monitor_printf ("%s\r", (args ? args : ""));
- expect_prompt(0);
+ resp_len = monitor_expect_prompt (buf, sizeof buf);
+
+ fputs_unfiltered (buf, gdb_stdout); /* Output the response */
}
-/*
- * _initialize_remote_monitors -- setup a few addtitional commands that
- * are usually only used by monitors.
- */
+/* Convert hex digit A to a number. */
+
+#if 0
+static int
+from_hex (a)
+ int a;
+{
+ if (a >= '0' && a <= '9')
+ return a - '0';
+ if (a >= 'a' && a <= 'f')
+ return a - 'a' + 10;
+ if (a >= 'A' && a <= 'F')
+ return a - 'A' + 10;
+
+ error ("Reply contains invalid hex digit 0x%x", a);
+}
+#endif
+
+char *
+monitor_get_dev_name ()
+{
+ return dev_name;
+}
+
+static struct target_ops monitor_ops ;
+
+static void init_base_monitor_ops(void)
+{
+ monitor_ops.to_shortname = NULL;
+ monitor_ops.to_longname = NULL;
+ monitor_ops.to_doc = NULL;
+ monitor_ops.to_open = NULL;
+ monitor_ops.to_close = monitor_close;
+ monitor_ops.to_attach = NULL;
+ monitor_ops.to_post_attach = NULL;
+ monitor_ops.to_require_attach = NULL;
+ monitor_ops.to_detach = monitor_detach;
+ monitor_ops.to_require_detach = NULL;
+ monitor_ops.to_resume = monitor_resume;
+ monitor_ops.to_wait = monitor_wait;
+ monitor_ops.to_post_wait = NULL;
+ monitor_ops.to_fetch_registers = monitor_fetch_registers;
+ monitor_ops.to_store_registers = monitor_store_registers;
+ monitor_ops.to_prepare_to_store = monitor_prepare_to_store;
+ monitor_ops.to_xfer_memory = monitor_xfer_memory;
+ monitor_ops.to_files_info = monitor_files_info;
+ monitor_ops.to_insert_breakpoint = monitor_insert_breakpoint;
+ monitor_ops.to_remove_breakpoint = monitor_remove_breakpoint;
+ monitor_ops.to_terminal_init = 0;
+ monitor_ops.to_terminal_inferior = 0;
+ monitor_ops.to_terminal_ours_for_output = 0;
+ monitor_ops.to_terminal_ours = 0;
+ monitor_ops.to_terminal_info = 0;
+ monitor_ops.to_kill = monitor_kill;
+ monitor_ops.to_load = monitor_load;
+ monitor_ops.to_lookup_symbol = 0;
+ monitor_ops.to_create_inferior = monitor_create_inferior;
+ monitor_ops.to_post_startup_inferior = NULL;
+ monitor_ops.to_acknowledge_created_inferior = NULL;
+ monitor_ops.to_clone_and_follow_inferior = NULL;
+ monitor_ops.to_post_follow_inferior_by_clone = NULL;
+ monitor_ops.to_insert_fork_catchpoint = NULL;
+ monitor_ops.to_remove_fork_catchpoint = NULL;
+ monitor_ops.to_insert_vfork_catchpoint = NULL;
+ monitor_ops.to_remove_vfork_catchpoint = NULL;
+ monitor_ops.to_has_forked = NULL;
+ monitor_ops.to_has_vforked = NULL;
+ monitor_ops.to_can_follow_vfork_prior_to_exec = NULL;
+ monitor_ops.to_post_follow_vfork = NULL;
+ monitor_ops.to_insert_exec_catchpoint = NULL;
+ monitor_ops.to_remove_exec_catchpoint = NULL;
+ monitor_ops.to_has_execd = NULL;
+ monitor_ops.to_reported_exec_events_per_exec_call = NULL;
+ monitor_ops.to_has_exited = NULL;
+ monitor_ops.to_mourn_inferior = monitor_mourn_inferior;
+ monitor_ops.to_can_run = 0;
+ monitor_ops.to_notice_signals = 0;
+ monitor_ops.to_thread_alive = 0;
+ monitor_ops.to_stop = monitor_stop;
+ monitor_ops.to_pid_to_exec_file = NULL;
+ monitor_ops.to_core_file_to_sym_file = NULL;
+ monitor_ops.to_stratum = process_stratum;
+ monitor_ops.DONT_USE = 0;
+ monitor_ops.to_has_all_memory = 1;
+ monitor_ops.to_has_memory = 1;
+ monitor_ops.to_has_stack = 1;
+ monitor_ops.to_has_registers = 1;
+ monitor_ops.to_has_execution = 1;
+ monitor_ops.to_sections = 0;
+ monitor_ops.to_sections_end = 0;
+ monitor_ops.to_magic = OPS_MAGIC ;
+} /* init_monitor_ops */
+
+/* Init the target_ops structure pointed at by OPS */
+
void
-_initialize_remote_monitors ()
+init_monitor_ops (ops)
+ struct target_ops *ops;
{
- struct cmd_list_element *c;
+ if (monitor_ops.to_magic != OPS_MAGIC)
+ init_base_monitor_ops ();
- /* this sets the type of download protocol */
- c = add_set_cmd ("loadtype", no_class, var_string, (char *)&loadtype_str,
- "Set the type of the remote load protocol.\n", &setlist);
- c->function.sfunc = set_loadtype_command;
- add_show_from_set (c, &showlist);
- loadtype_str = savestring ("generic", 8);
+ memcpy (ops, &monitor_ops, sizeof monitor_ops);
+}
+
+/* Define additional commands that are usually only used by monitors. */
+void
+_initialize_remote_monitors ()
+{
+ init_base_monitor_ops() ;
add_show_from_set (add_set_cmd ("hash", no_class, var_boolean,
(char *)&hashmark,
"Set display of activity while downloading a file.\n\
-When enabled, a period \'.\' is displayed.",
+When enabled, a hashmark \'#\' is displayed.",
&setlist),
&showlist);
- /* generic monitor command */
add_com ("monitor", class_obscure, monitor_command,
"Send a command to the debug monitor.");
}
+
+