-/* Remote debugging interface for ROM68K boot monitor, for GDB.
- * Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
- * Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
- *
- * Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
- * Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
- *
- * This file is part of GDB.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-struct monitor_ops {
- char *execute; /* execute or usually GO command */
- char *resume; /* continue command */
- char *step; /* single step */
- char *set_break; /* set a breakpoint */
- char *clr_break; /* clear a breakpoint */
- char *set_mem; /* set memory to a value */
- char *dis_mem; /* display memory */
- char *mem_prompt; /* prompt memory commands use */
- char *set_reg; /* set a register */
- char *reg_delim; /* delimiter between registers */
- char *get_reg; /* read a register */
- char *load; /* download command */
- char *prompt; /* monitor command prompt */
- char *cmd_delim; /* end-of-command delimitor */
- char *cmd_end; /* optional command terminator */
+/* Definitions for remote debugging interface for ROM monitors.
+ Copyright 1990, 1991, 1992, 1996 Free Software Foundation, Inc.
+ Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+#include "serial.h"
+
+/* This structure describes the strings necessary to give small command
+ sequences to the monitor, and parse the response.
+
+ CMD is the actual command typed at the monitor. Usually this has
+ embedded sequences ala printf, which are substituted with the
+ arguments appropriate to that type of command. Ie: to examine a
+ register, we substitute the register name for the first arg. To
+ modify memory, we substitute the memory location and the new
+ contents for the first and second args, etc...
+
+ RESP_DELIM used to home in on the response string, and is used to
+ disambiguate the answer within the pile of text returned by the
+ monitor. This should be a unique string that immediately precedes
+ the answer. Ie: if your monitor prints out `PC: 00000001= ' in
+ response to asking for the PC, you should use `: ' as the
+ RESP_DELIM. RESP_DELIM may be NULL if the res- ponse is going to
+ be ignored, or has no particular leading text.
+
+ TERM is the string that the monitor outputs to indicate that it is
+ idle, and waiting for input. This is usually a prompt of some
+ sort. In the previous example, it would be `= '. It is important
+ that TERM really means that the monitor is idle, otherwise GDB may
+ try to type at it when it isn't ready for input. This is a problem
+ because many monitors cannot deal with type-ahead. TERM may be
+ NULL if the normal prompt is output.
+
+ TERM_CMD is used to quit out of the subcommand mode and get back to
+ the main prompt. TERM_CMD may be NULL if it isn't necessary. It
+ will also be ignored if TERM is NULL. */
+
+struct memrw_cmd
+{
+ char *cmdb; /* Command to send for byte read/write */
+ char *cmdw; /* Command for word (16 bit) read/write */
+ char *cmdl; /* Command for long (32 bit) read/write */
+ char *cmdll; /* Command for long long (64 bit) read/write */
+ char *resp_delim; /* String just prior to the desired value */
+ char *term; /* Terminating string to search for */
+ char *term_cmd; /* String to get out of sub-mode (if necessary) */
+};
+
+struct regrw_cmd
+{
+ char *cmd; /* Command to send for reg read/write */
+ char *resp_delim; /* String (actually a regexp if getmem) just
+ prior to the desired value */
+ char *term; /* Terminating string to search for */
+ char *term_cmd; /* String to get out of sub-mode (if necessary) */
+};
+
+struct monitor_ops
+{
+ int flags; /* See below */
+ char **init; /* List of init commands. NULL terminated. */
+ char *cont; /* continue command */
+ char *step; /* single step */
+ char *stop; /* Interrupt program string */
+ char *set_break; /* set a breakpoint */
+ char *clr_break; /* clear a breakpoint */
+ char *clr_all_break; /* Clear all breakpoints */
+ char *fill; /* Memory fill cmd (addr len val) */
+ struct memrw_cmd setmem; /* set memory to a value */
+ struct memrw_cmd getmem; /* display memory */
+ struct regrw_cmd setreg; /* set a register */
+ struct regrw_cmd getreg; /* get a register */
+ /* Some commands can dump a bunch of registers
+ at once. This comes as a set of REG=VAL
+ pairs. This should be called for each pair
+ of registers that we can parse to supply
+ GDB with the value of a register. */
+ char *dump_registers; /* Command to dump all regs at once */
+ char *register_pattern; /* Pattern that picks out register from reg dump */
+ void (*supply_register) PARAMS ((char *name, int namelen,
+ char *val, int vallen));
+ void (*load_routine) PARAMS ((serial_t desc, char *file,
+ int hashmark)); /* Download routine */
+ int (*dumpregs) PARAMS((void)) ; /* routine to dump all registers */
+ int (*continue_hook) PARAMS((void)) ; /* Emit the continue command */
+ int (*wait_filter) PARAMS((char * buf, /* Maybe contains registers */
+ int bufmax ,
+ int * response_length,
+ struct target_waitstatus * status)) ;
+ char *load; /* load command */
+ char *loadresp; /* Response to load command */
+ char *prompt; /* monitor command prompt */
+ char *line_term; /* end-of-command delimitor */
+ char *cmd_end; /* optional command terminator */
+ struct target_ops *target; /* target operations */
+ int stopbits; /* number of stop bits */
+ char **regnames; /* array of register names in ascii */
+ int magic; /* Check value */
};
-extern struct monitor_ops *current_monitor;
-
-#define GO_CMD (current_monitor->execute)
-#define CONT_CMD (current_monitor->resume)
-#define STEP_CMD (current_monitor->step)
-#define SET_BREAK_CMD (current_monitor->set_break)
-#define CLR_BREAK_CMD (current_monitor->clr_break)
-#define MEM_SET_CMD (current_monitor->set_mem)
-#define MEM_DIS_CMD (current_monitor->dis_mem)
-#define LOAD_CMD (current_monitor->load)
-#define GET_REG (current_monitor->get_reg)
-#define REG_DELIM (current_monitor->reg_delim)
-#define SET_REG (current_monitor->set_reg)
-#define CMD_END (current_monitor->cmd_end)
-#define CMD_DELIM (current_monitor->cmd_delim)
-#define PROMPT (current_monitor->prompt)
-#define MEM_PROMPT (current_monitor->mem_prompt)
-
-#define push_monitor(x) current_monitor = x;
-
+/* The monitor ops magic number, used to detect if an ops structure doesn't
+ have the right number of entries filled in. */
+
+#define MONITOR_OPS_MAGIC 600925
+
+/* Flag definitions. */
+
+/* If set, then clear breakpoint command uses address, otherwise it
+ uses an index returned by the monitor. */
+
+#define MO_CLR_BREAK_USES_ADDR 0x1
+
+/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
+ as args, else it uses STARTADDR, LENGTH, VALUE as args. */
+
+#define MO_FILL_USES_ADDR 0x2
+
+/* If set, then monitor doesn't automatically supply register dump
+ when coming back after a continue. */
+
+#define MO_NEED_REGDUMP_AFTER_CONT 0x4
+
+/* getmem needs start addr and end addr */
+
+#define MO_GETMEM_NEEDS_RANGE 0x8
+
+/* getmem can only read one loc at a time */
+
+#define MO_GETMEM_READ_SINGLE 0x10
+
+/* handle \r\n combinations */
+
+#define MO_HANDLE_NL 0x20
+
+/* don't expect echos in monitor_open */
+
+#define MO_NO_ECHO_ON_OPEN 0x40
+
+/* If set, send break to stop monitor */
+
+#define MO_SEND_BREAK_ON_STOP 0x80
+
+/* If set, target sends an ACK after each S-record */
+
+#define MO_SREC_ACK 0x100
+
+/* Allow 0x prefix on addresses retured from monitor */
+
+#define MO_HEX_PREFIX 0x200
+
+/* Some monitors require a different command when starting a program */
+
+#define MO_RUN_FIRST_TIME 0x400
+
+/* Don't expect echos when getting memory */
+
+#define MO_NO_ECHO_ON_SETMEM 0x800
+
+/* If set, then register store command expects value BEFORE regname */
+
+#define MO_REGISTER_VALUE_FIRST 0x1000
+
+/* If set, then the monitor displays registers as pairs. */
+
+#define MO_32_REGS_PAIRED 0x2000
+
+/* If set, then register setting happens interactively. */
+
+#define MO_SETREG_INTERACTIVE 0x4000
+
+/* If set, then memory setting happens interactively. */
+
+#define MO_SETMEM_INTERACTIVE 0x8000
+
+/* If set, then memory dumps are always on 16-byte boundaries, even
+ when less is desired. */
+
+#define MO_GETMEM_16_BOUNDARY 0x10000
+
+/* If set, then the monitor numbers its breakpoints starting from 1. */
+
+#define MO_CLR_BREAK_1_BASED 0x20000
+
+/* If set, then the monitor acks srecords with a plus sign. */
+
+#define MO_SREC_ACK_PLUS 0x40000
+
+/* If set, then the monitor "acks" srecords with rotating lines. */
+
+#define MO_SREC_ACK_ROTATE 0x80000
+
+/* If set, then remove useless address bits from memory addresses. */
+
+#define MO_ADDR_BITS_REMOVE 0x100000
+
+/* If set, then display target program output if prefixed by ^O. */
+
+#define MO_PRINT_PROGRAM_OUTPUT 0x200000
+
+/* Some dump bytes commands align the first data with the preceeding
+16 byte boundary. Some print blanks and start at the exactly the
+requested boundary. */
+
+#define MO_EXACT_DUMPADDR 0x400000
+
+/* Rather entering and exiting the write memory dialog for each word byte,
+ we can save time by transferring the whole block without exiting
+ the memory editing mode. You only need to worry about this
+ if you are doing memory downloading.
+ This engages a new write function registered with dcache.
+ */
+#define MO_HAS_BLOCKWRITES 0x800000
+
+#define SREC_SIZE 160
+
+extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops,
+ int from_tty));
+extern void monitor_close PARAMS ((int quitting));
+extern char *monitor_supply_register PARAMS ((int regno, char *valstr));
+extern int monitor_expect PARAMS ((char *prompt, char *buf, int buflen));
+extern int monitor_expect_prompt PARAMS ((char *buf, int buflen));
+extern void monitor_printf PARAMS ((char *, ...))
+ ATTR_FORMAT(printf, 1, 2);
+extern void monitor_printf_noecho PARAMS ((char *, ...))
+ ATTR_FORMAT(printf, 1, 2);
+extern void monitor_write PARAMS ((char *buf, int buflen));
+extern int monitor_readchar PARAMS ((void));
+extern char *monitor_get_dev_name PARAMS ((void));
+extern void init_monitor_ops PARAMS ((struct target_ops *));
+extern int monitor_dump_reg_block PARAMS((char * dump_cmd)) ;
+extern void flush_monitor_dcache PARAMS ((void));