/* Target-machine dependent code for Nios II, for GDB.
- Copyright (C) 2012-2015 Free Software Foundation, Inc.
+ Copyright (C) 2012-2017 Free Software Foundation, Inc.
Contributed by Peter Brookes (pbrookes@altera.com)
and Andrew Draper (adraper@altera.com).
Contributed by Mentor Graphics, Inc.
#include "value.h"
#include "symfile.h"
#include "arch-utils.h"
-#include "floatformat.h"
#include "infcall.h"
#include "regset.h"
#include "target-descriptions.h"
/* To get entry_point_address. */
#include "objfiles.h"
+#include <algorithm>
/* Nios II specific header. */
#include "nios2-tdep.h"
NIOS2_MPUACC_REGNUM /* 48 */
};
+gdb_static_assert (ARRAY_SIZE (nios2_dwarf2gdb_regno_map) == NIOS2_NUM_REGS);
/* Implement the dwarf2_reg_to_regnum gdbarch method. */
static int
nios2_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int dw_reg)
{
- if (dw_reg < 0 || dw_reg > NIOS2_NUM_REGS)
- {
- warning (_("Dwarf-2 uses unmapped register #%d"), dw_reg);
- return dw_reg;
- }
+ if (dw_reg < 0 || dw_reg >= NIOS2_NUM_REGS)
+ return -1;
return nios2_dwarf2gdb_regno_map[dw_reg];
}
Note that this number should not be too large, else we can
potentially end up iterating through unmapped memory. */
int ninsns, max_insns = 50;
- int regno;
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
unsigned long mach = gdbarch_bfd_arch_info (gdbarch)->mach;
- int is_r2 = (mach == bfd_mach_nios2r2);
/* Does the frame set up the FP register? */
int base_reg = 0;
= skip_prologue_using_sal (gdbarch, func_addr);
if (post_prologue_pc != 0)
- return max (start_pc, post_prologue_pc);
+ return std::max (start_pc, post_prologue_pc);
}
/* Prologue analysis does the rest.... */
return nios2_analyze_prologue (gdbarch, start_pc, start_pc, &cache, NULL);
}
-/* Implement the breakpoint_from_pc gdbarch hook.
-
- The Nios II ABI for Linux says: "Userspace programs should not use
- the break instruction and userspace debuggers should not insert
- one." and "Userspace breakpoints are accomplished using the trap
- instruction with immediate operand 31 (all ones)."
-
- So, we use "trap 31" consistently as the breakpoint on bare-metal
- as well as Linux targets. */
+/* Implement the breakpoint_kind_from_pc gdbarch method. */
-static const gdb_byte*
-nios2_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *bp_addr,
- int *bp_size)
+static int
+nios2_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr)
{
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
unsigned long mach = gdbarch_bfd_arch_info (gdbarch)->mach;
if (mach == bfd_mach_nios2r2)
{
- /* R2 trap encoding:
- ((0x2d << 26) | (0x1f << 21) | (0x1d << 16) | (0x20 << 0))
- 0xb7fd0020
- CDX trap.n encoding:
- ((0xd << 12) | (0x1f << 6) | (0x9 << 0))
- 0xd7c9
- Note that code is always little-endian on R2. */
- static const gdb_byte r2_breakpoint_le[] = {0x20, 0x00, 0xfd, 0xb7};
- static const gdb_byte cdx_breakpoint_le[] = {0xc9, 0xd7};
unsigned int insn;
const struct nios2_opcode *op
- = nios2_fetch_insn (gdbarch, *bp_addr, &insn);
+ = nios2_fetch_insn (gdbarch, *pcptr, &insn);
if (op && op->size == NIOS2_CDX_OPCODE_SIZE)
- {
- *bp_size = NIOS2_CDX_OPCODE_SIZE;
- return cdx_breakpoint_le;
- }
+ return NIOS2_CDX_OPCODE_SIZE;
else
- {
- *bp_size = NIOS2_OPCODE_SIZE;
- return r2_breakpoint_le;
- }
+ return NIOS2_OPCODE_SIZE;
}
else
- {
- /* R1 trap encoding:
- ((0x1d << 17) | (0x2d << 11) | (0x1f << 6) | (0x3a << 0))
- 0x003b6ffa */
- static const gdb_byte r1_breakpoint_le[] = {0xfa, 0x6f, 0x3b, 0x0};
- static const gdb_byte r1_breakpoint_be[] = {0x0, 0x3b, 0x6f, 0xfa};
- *bp_size = NIOS2_OPCODE_SIZE;
- if (byte_order_for_code == BFD_ENDIAN_BIG)
- return r1_breakpoint_be;
- else
- return r1_breakpoint_le;
- }
+ return NIOS2_OPCODE_SIZE;
}
-/* Implement the print_insn gdbarch method. */
+/* Implement the sw_breakpoint_from_kind gdbarch method. */
-static int
-nios2_print_insn (bfd_vma memaddr, disassemble_info *info)
+static const gdb_byte *
+nios2_sw_breakpoint_from_kind (struct gdbarch *gdbarch, int kind, int *size)
{
- if (info->endian == BFD_ENDIAN_BIG)
- return print_insn_big_nios2 (memaddr, info);
+/* The Nios II ABI for Linux says: "Userspace programs should not use
+ the break instruction and userspace debuggers should not insert
+ one." and "Userspace breakpoints are accomplished using the trap
+ instruction with immediate operand 31 (all ones)."
+
+ So, we use "trap 31" consistently as the breakpoint on bare-metal
+ as well as Linux targets. */
+
+ /* R2 trap encoding:
+ ((0x2d << 26) | (0x1f << 21) | (0x1d << 16) | (0x20 << 0))
+ 0xb7fd0020
+ CDX trap.n encoding:
+ ((0xd << 12) | (0x1f << 6) | (0x9 << 0))
+ 0xd7c9
+ Note that code is always little-endian on R2. */
+ *size = kind;
+
+ if (kind == NIOS2_CDX_OPCODE_SIZE)
+ {
+ static const gdb_byte cdx_breakpoint_le[] = {0xc9, 0xd7};
+
+ return cdx_breakpoint_le;
+ }
else
- return print_insn_little_nios2 (memaddr, info);
-}
+ {
+ unsigned long mach = gdbarch_bfd_arch_info (gdbarch)->mach;
+ if (mach == bfd_mach_nios2r2)
+ {
+ static const gdb_byte r2_breakpoint_le[] = {0x20, 0x00, 0xfd, 0xb7};
+
+ return r2_breakpoint_le;
+ }
+ else
+ {
+ enum bfd_endian byte_order_for_code
+ = gdbarch_byte_order_for_code (gdbarch);
+ /* R1 trap encoding:
+ ((0x1d << 17) | (0x2d << 11) | (0x1f << 6) | (0x3a << 0))
+ 0x003b6ffa */
+ static const gdb_byte r1_breakpoint_le[] = {0xfa, 0x6f, 0x3b, 0x0};
+ static const gdb_byte r1_breakpoint_be[] = {0x0, 0x3b, 0x6f, 0xfa};
+
+ if (byte_order_for_code == BFD_ENDIAN_BIG)
+ return r1_breakpoint_be;
+ else
+ return r1_breakpoint_le;
+ }
+ }
+}
/* Implement the frame_align gdbarch method. */
int struct_return, CORE_ADDR struct_addr)
{
int argreg;
- int float_argreg;
int argnum;
int len = 0;
int stack_offset = 0;
for (argnum = 0; argnum < nargs; argnum++)
{
const gdb_byte *val;
- gdb_byte valbuf[MAX_REGISTER_SIZE];
struct value *arg = args[argnum];
struct type *arg_type = check_typedef (value_type (arg));
int len = TYPE_LENGTH (arg_type);
- enum type_code typecode = TYPE_CODE (arg_type);
val = value_contents (arg);
struct gdbarch *gdbarch = get_frame_arch (this_frame);
CORE_ADDR current_pc;
struct nios2_unwind_cache *cache;
- int i;
if (*this_prologue_cache)
return (struct nios2_unwind_cache *) *this_prologue_cache;
CORE_ADDR stack_addr;
struct trad_frame_cache *this_trad_cache;
struct gdbarch *gdbarch = get_frame_arch (this_frame);
- int num_regs = gdbarch_num_regs (gdbarch);
if (*this_cache != NULL)
return (struct trad_frame_cache *) *this_cache;
struct frame_info *this_frame, void **cache)
{
gdb_byte dummy[4];
- struct obj_section *s;
CORE_ADDR pc = get_frame_address_in_block (this_frame);
/* Use the stub unwinder for unreadable code. */
branch prediction. */
static CORE_ADDR
-nios2_get_next_pc (struct frame_info *frame, CORE_ADDR pc)
+nios2_get_next_pc (struct regcache *regcache, CORE_ADDR pc)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct gdbarch *gdbarch = regcache->arch ();
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
unsigned long mach = gdbarch_bfd_arch_info (gdbarch)->mach;
unsigned int insn;
if (nios2_match_branch (insn, op, mach, &ra, &rb, &imm, &cond))
{
- int ras = get_frame_register_signed (frame, ra);
- int rbs = get_frame_register_signed (frame, rb);
- unsigned int rau = get_frame_register_unsigned (frame, ra);
- unsigned int rbu = get_frame_register_unsigned (frame, rb);
+ int ras = regcache_raw_get_signed (regcache, ra);
+ int rbs = regcache_raw_get_signed (regcache, rb);
+ unsigned int rau = regcache_raw_get_unsigned (regcache, ra);
+ unsigned int rbu = regcache_raw_get_unsigned (regcache, rb);
pc += op->size;
switch (cond)
else if (nios2_match_jmpr (insn, op, mach, &ra)
|| nios2_match_callr (insn, op, mach, &ra))
- pc = get_frame_register_unsigned (frame, ra);
+ pc = regcache_raw_get_unsigned (regcache, ra);
else if (nios2_match_ldwm (insn, op, mach, &uimm, &ra, &imm, &wb, &id, &ret)
&& ret)
/* If ra is in the reglist, we have to use the value saved in the
stack frame rather than the current value. */
if (uimm & (1 << NIOS2_RA_REGNUM))
- pc = nios2_unwind_pc (gdbarch, frame);
+ pc = nios2_unwind_pc (gdbarch, get_current_frame ());
else
- pc = get_frame_register_unsigned (frame, NIOS2_RA_REGNUM);
+ pc = regcache_raw_get_unsigned (regcache, NIOS2_RA_REGNUM);
}
else if (nios2_match_trap (insn, op, mach, &uimm) && uimm == 0)
{
if (tdep->syscall_next_pc != NULL)
- return tdep->syscall_next_pc (frame, op);
+ return tdep->syscall_next_pc (get_current_frame (), op);
}
else
/* Implement the software_single_step gdbarch method. */
-static int
-nios2_software_single_step (struct frame_info *frame)
+static std::vector<CORE_ADDR>
+nios2_software_single_step (struct regcache *regcache)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
- CORE_ADDR next_pc = nios2_get_next_pc (frame, get_frame_pc (frame));
-
- insert_single_step_breakpoint (gdbarch, aspace, next_pc);
+ CORE_ADDR next_pc = nios2_get_next_pc (regcache, regcache_read_pc (regcache));
- return 1;
+ return {next_pc};
}
/* Implement the get_longjump_target gdbarch method. */
{
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
- int register_bytes, i;
+ int i;
struct tdesc_arch_data *tdesc_data = NULL;
const struct target_desc *tdesc = info.target_desc;
set_gdbarch_skip_prologue (gdbarch, nios2_skip_prologue);
set_gdbarch_stack_frame_destroyed_p (gdbarch, nios2_stack_frame_destroyed_p);
- set_gdbarch_breakpoint_from_pc (gdbarch, nios2_breakpoint_from_pc);
+ set_gdbarch_breakpoint_kind_from_pc (gdbarch, nios2_breakpoint_kind_from_pc);
+ set_gdbarch_sw_breakpoint_from_kind (gdbarch, nios2_sw_breakpoint_from_kind);
set_gdbarch_dummy_id (gdbarch, nios2_dummy_id);
set_gdbarch_unwind_pc (gdbarch, nios2_unwind_pc);
frame_base_set_default (gdbarch, &nios2_frame_base);
- set_gdbarch_print_insn (gdbarch, nios2_print_insn);
-
/* Enable inferior call support. */
set_gdbarch_push_dummy_call (gdbarch, nios2_push_dummy_call);
return gdbarch;
}
-extern initialize_file_ftype _initialize_nios2_tdep; /* -Wmissing-prototypes */
-
void
_initialize_nios2_tdep (void)
{