-#Copyright 1989, 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+#Copyright 1989, 1990, 91, 92, 93, 94, 95, 1999 Free Software Foundation, Inc.
# This file is part of GDB.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-prefix = /usr/local
+srcdir = @srcdir@
+VPATH = @srcdir@
-program_transform_name =
-exec_prefix = $(prefix)
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+host_alias = @host_alias@
+target_alias = @target_alias@
+program_transform_name = @program_transform_name@
+bindir = @bindir@
+libdir = @libdir@
tooldir = $(libdir)/$(target_alias)
-datadir = $(prefix)/lib
-mandir = $(prefix)/man
+datadir = @datadir@
+mandir = @mandir@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
-infodir = $(prefix)/info
-includedir = $(prefix)/include
-docdir = $(datadir)/doc
+infodir = @infodir@
+htmldir = $(prefix)/html
+includedir = @includedir@
-SHELL = /bin/sh
+SHELL = @SHELL@
-INSTALL = `cd $(srcdir)/../..;pwd`/install.sh -c
-INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
-INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
-INSTALL_XFORM1 = $(INSTALL_XFORM) -b=.1
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
CC_FOR_TARGET = ` \
if [ -f ../../gcc/xgcc ] ; then \
- if [ -f ../../newlib/Makefile ] ; then \
- echo ../../gcc/xgcc -B../../gcc/ -idirafter ../newlib/targ-include -idirafter $${rootsrc}/../newlib/libc/include -nostdinc -L../../../newlib -B../../../newlib/; \
- else \
- echo ../../gcc/xgcc -B../../gcc/; \
- fi; \
+ echo ../../gcc/xgcc -B../../gcc/; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(CC); \
- else \
- t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
- fi; \
+ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi`
NLMCONV_FOR_TARGET = ` \
if [ -f ../../binutils/nlmconv ] ; then \
echo ../../binutils/nlmconv; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(NLMCONV); \
- else \
- t='$(program_transform_name)'; echo nlmconv | sed -e '' $$t; \
- fi; \
- fi`
-
-NWSOURCE = /gaunt/grossman/unsupported/Novell
-NWINCLUDES = -I/gaunt/grossman/PPC-NETWARE/ndk/include
-
-LD_FOR_TARGET = ` \
- if [ -f ../../ld/ld.new ] ; then \
- echo ../../ld/ld.new; \
- else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(LD); \
- else \
- t='$(program_transform_name)'; echo ld | sed -e '' $$t; \
- fi; \
+ t='$(program_transform_name)'; echo nlmconv | sed -e '' $$t; \
fi`
-AR = ar
-AR_FLAGS = qv
-RANLIB = ranlib
-
-# Flags that describe where you can find the termcap library.
-# This can be overridden in the host Makefile fragment file.
-TERMCAP = -ltermcap
-
-# System V: If you compile gdb with a compiler which uses the coff
-# encapsulation feature (this is a function of the compiler used, NOT
-# of the m-?.h file selected by config.gdb), you must make sure that
-# the GNU nm is the one that is used by munch.
-
-# If you are compiling with GCC, make sure that either 1) You use the
-# -traditional flag, or 2) You have the fixed include files where GCC
-# can reach them. Otherwise the ioctl calls in inflow.c
-# will be incorrectly compiled. The "fixincludes" script in the gcc
-# distribution will fix your include files up.
-#CC=cc
-#CC=gcc -traditional
-GCC=gcc
-
-# Directory containing source files. Don't clean up the spacing,
-# this exact string is matched for by the "configure" script.
-srcdir = .
-
-# It is also possible that you will need to add -I/usr/include/sys to the
-# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
-# is where it should be according to Posix).
-
-# If you use bison instead of yacc, it needs to include the "-y" argument.
-#BISON=bison -y
-BISON=yacc
-YACC=$(BISON)
-
-# where to find texinfo; GDB dist should include a recent one
-TEXIDIR=${srcdir}/../texinfo
-
-# where to find makeinfo, preferably one designed for texinfo-2
-MAKEINFO=makeinfo
-
-# Set this up with gcc if you have gnu ld and the loader will print out
-# line numbers for undefinded refs.
-#CC-LD=gcc -static
-CC-LD=${CC}
-
-# Where is the "include" directory? Traditionally ../include or ./include
-INCLUDE_DIR = ${srcdir}/../../include
-INCLUDE_DEP = $$(INCLUDE_DIR)
-
-# Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
-# or ./mmalloc (When we want the binary library built from it, we use
-# ${MMALLOC_DIR}${subdir}.)
-# Note that mmalloc can still be used on systems without mmap().
-# To use your system malloc, comment out the following defines.
-MMALLOC_DIR = ${srcdir}/../mmalloc
-MMALLOC_DEP = $$(MMALLOC_DIR)
-# To use your system malloc, uncomment MMALLOC_DISABLE.
-#MMALLOC_DISABLE = -DNO_MMALLOC
-# To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
-#MMALLOC_CHECK = -DNO_MMALLOC_CHECK
-MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
-
-# Where is the source dir for the READLINE library? Traditionally in .. or .
-# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
-READLINE_DIR = ${srcdir}/../readline
-READLINE_DEP = $$(READLINE_DIR)
-
# All the includes used for CFLAGS and for lint.
-# -I. for config files.
-# -I${srcdir} possibly for regex.h also.
-# -I${srcdir}/config for more generic config files.
-INCLUDE_CFLAGS = -I. -I${srcdir} -I${srcdir}/.. -I${srcdir}/../config -I$(INCLUDE_DIR)
-
-# M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
-# from the config/ directory.
-GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS}
-#PROFILE_CFLAGS = -pg
+INCLUDE_CFLAGS = -I. -I${srcdir}
# CFLAGS is specifically reserved for setting from the command line
# when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
CFLAGS = -g
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
-INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS} ${NWINCLUDES}
+INTERNAL_CFLAGS = ${CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
LDFLAGS = $(CFLAGS)
# Perhaps should come from parent Makefile
VERSION = gdbserve-4.12
DIST=gdb
-LINT=/usr/5bin/lint
-LINTFLAGS= -I${BFD_DIR}
-
-# Host and target-dependent makefile fragments come in here.
-####
-# End of host and target-dependent makefile fragments
+# target-dependent makefile fragment come in here.
+@target_makefile_frag@
+# End target-dependent makefile fragment
# All source files that go into linking GDB remote server.
.c.o:
${CC_FOR_TARGET} -c ${INTERNAL_CFLAGS} $<
+.S.o:
+ ${CC_FOR_TARGET} -c ${INTERNAL_CFLAGS} $<
+
all: gdbserve.nlm
# Traditionally "install" depends on "all". But it may be useful
# install-only is intended to address that need.
install: all install-only
install-only:
- $(INSTALL_XFORM) gdbserver $(bindir)/gdbserver
- $(INSTALL_XFORM1) $(srcdir)/gdbserver.1 $(man1dir)/gdbserver.1
+ $(INSTALL) gdbserve.nlm $(bindir)/gdbserve.nlm
uninstall: force
- rm -f $(bindir)/gdbserver $(man1dir)/gdbserver.1
-# @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
+ rm -f $(bindir)/gdbserve.nlm
installcheck:
check:
info dvi:
install-info:
clean-info:
+html:
+install-html:
gdbserve.nlm: gdbserve.O $(srcdir)/gdbserve.def
${NLMCONV_FOR_TARGET} -T $(srcdir)/gdbserve.def
gdbserve.O: prelude.o gdbserve.o $(TDEPFILES)
- ${LD_FOR_TARGET} $(LDFLAGS) -r -o gdbserve.O prelude.o gdbserve.o ${TDEPFILES}
-
-config.status:
- @echo "You must configure gdbserver. Look at the README file for details."
- @false
+ ${CC_FOR_TARGET} $(LDFLAGS) -r -o gdbserve.O prelude.o gdbserve.o ${TDEPFILES}
# Put the proper machine-specific files first, so M-. on a machine
# specific routine gets the one for the correct machine.
clean:
rm -f *.o ${ADD_FILES} *~
- rm -f init.c version.c
rm -f gdbserve.O gdbserve.nlm core make.log
-distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
- rm -f tm.h xm.h config.status
+distclean: clean TAGS
+ rm -f config.log config.cache config.status
rm -f Makefile
-realclean: clean
- rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
- rm -f tm.h xm.h config.status
+maintainer-clean realclean: clean
+ rm -f TAGS
+ rm -f config.log config.cache config.status
rm -f Makefile
-STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
+Makefile: Makefile.in config.status @target_makefile_frag_path@
+ $(SHELL) config.status
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
- $(SHELL) ./config.status
+config.status: configure
+ $(SHELL) config.status --recheck
force:
-version.c: Makefile
- echo 'char *version = "$(VERSION)";' >version.c
-
# GNU Make has an annoying habit of putting *all* the Makefile variables
# into the environment, unless you include this target as a circumvention.
# Rumor is that this will be fixed (and this target can be removed)