#define OBJFILES_H
#include "gdb_obstack.h" /* For obstack internals. */
-#include "symfile.h" /* For struct psymbol_allocation_list */
+#include "symfile.h" /* For struct psymbol_allocation_list. */
#include "progspace.h"
struct bcache;
the debugging information, where these values are the starting
address (inclusive) and ending address (exclusive) of the
instruction space in the executable which correspond to the
- "startup file", I.E. crt0.o in most cases. This file is assumed to
+ "startup file", i.e. crt0.o in most cases. This file is assumed to
be a startup file and frames with pc's inside it are treated as
nonexistent. Setting these variables is necessary so that
backtraces do not fly off the bottom of the stack.
NOTE: cagney/2003-09-09: It turns out that this "traditional"
method doesn't work. Corinna writes: ``It turns out that the call
to test for "inside entry file" destroys a meaningful backtrace
- under some conditions. E. g. the backtrace tests in the asm-source
+ under some conditions. E.g. the backtrace tests in the asm-source
testcase are broken for some targets. In this test the functions
are all implemented as part of one file and the testcase is not
necessarily linked with a start file (depending on the target).
/* Objfile this section is part of. */
struct objfile *objfile;
- /* True if this "overlay section" is mapped into an "overlay region". */
+ /* True if this "overlay section" is mapped into an "overlay region". */
int ovly_mapped;
};
/* The "objstats" structure provides a place for gdb to record some
interesting information about its internal state at runtime, on a
per objfile basis, such as information about the number of symbols
- read, size of string table (if any), etc. */
+ read, size of string table (if any), etc. */
struct objstats
{
struct list {struct list *next; struct objfile *objfile};
where the list structure is completely maintained separately within
- each gdb process. */
+ each gdb process. */
struct objfile *next;
char *name;
- /* Some flag bits for this objfile. */
+ CORE_ADDR addr_low;
+
+ /* Some flag bits for this objfile. */
unsigned short flags;
/* Each objfile points to a linked list of symtabs derived from this file,
one symtab structure for each compilation unit (source file). Each link
- in the symtab list contains a backpointer to this objfile. */
+ in the symtab list contains a backpointer to this objfile. */
struct symtab *symtabs;
/* Each objfile points to a linked list of partial symtabs derived from
this file, one partial symtab structure for each compilation unit
- (source file). */
+ (source file). */
struct partial_symtab *psymtabs;
struct addrmap *psymtabs_addrmap;
- /* List of freed partial symtabs, available for re-use */
+ /* List of freed partial symtabs, available for re-use. */
struct partial_symtab *free_psymtabs;
long mtime;
/* Obstack to hold objects that should be freed when we load a new symbol
- table from this object file. */
+ table from this object file. */
struct obstack objfile_obstack;
/* A byte cache where we can stash arbitrary "chunks" of bytes that
- will not change. */
+ will not change. */
- struct psymbol_bcache *psymbol_cache; /* Byte cache for partial syms */
- struct bcache *macro_cache; /* Byte cache for macros */
- struct bcache *filename_cache; /* Byte cache for file names. */
+ struct psymbol_bcache *psymbol_cache; /* Byte cache for partial syms. */
+ struct bcache *macro_cache; /* Byte cache for macros. */
+ struct bcache *filename_cache; /* Byte cache for file names. */
/* Hash table for mapping symbol names to demangled names. Each
entry in the hash table is actually two consecutive strings,
struct htab *demangled_names_hash;
/* Vectors of all partial symbols read in from file. The actual data
- is stored in the objfile_obstack. */
+ is stored in the objfile_obstack. */
struct psymbol_allocation_list global_psymbols;
struct psymbol_allocation_list static_psymbols;
of it. There is also a count of the number of symbols, which does
not include the terminating null symbol. The array itself, as well
as all the data that it points to, should be allocated on the
- objfile_obstack for this file. */
+ objfile_obstack for this file. */
struct minimal_symbol *msymbols;
int minimal_symbol_count;
struct minimal_symbol *msymbol_demangled_hash[MINIMAL_SYMBOL_HASH_SIZE];
/* Structure which keeps track of functions that manipulate objfile's
- of the same type as this objfile. I.E. the function to read partial
+ of the same type as this objfile. I.e. the function to read partial
symbols for example. Note that this structure is in statically
allocated memory, and is shared by all objfiles that use the
- object module reader of this type. */
+ object module reader of this type. */
const struct sym_fns *sf;
/* The per-objfile information about the entry point, the scope (file/func)
- containing the entry point, and the scope of the user's main() func. */
+ containing the entry point, and the scope of the user's main() func. */
struct entry_info ei;
/* Information about stabs. Will be filled in with a dbx_symfile_info
- struct by those readers that need it. */
+ struct by those readers that need it. */
/* NOTE: cagney/2004-10-23: This has been replaced by per-objfile
data points implemented using "data" and "num_data" below. For
an example of how to use this replacement, see "objfile_data"
struct section_offsets *section_offsets;
int num_sections;
- /* Indexes in the section_offsets array. These are initialized by the
+ /* Indexes in the section_offsets array. These are initialized by the
*_symfile_offsets() family of functions (som_symfile_offsets,
- xcoff_symfile_offsets, default_symfile_offsets). In theory they
+ xcoff_symfile_offsets, default_symfile_offsets). In theory they
should correspond to the section indexes used by bfd for the
- current objfile. The exception to this for the time being is the
- SOM version. */
+ current objfile. The exception to this for the time being is the
+ SOM version. */
int sect_index_text;
int sect_index_data;
struct objfile *separate_debug_objfile;
/* If this is a separate debug object, this is used as a link to the
- actual executable objfile. */
+ actual executable objfile. */
struct objfile *separate_debug_objfile_backlink;
/* If this is a separate debug object, this is a link to the next one
for the same executable objfile. */
struct objfile *separate_debug_objfile_link;
- /* Place to stash various statistics about this objfile */
+ /* Place to stash various statistics about this objfile. */
OBJSTATS;
/* A symtab that the C++ code uses to stash special symbols
struct symbol *template_symbols;
};
-/* Defines for the objfile flag word. */
+/* Defines for the objfile flag word. */
/* When an object file has its functions reordered (currently Irix-5.2
shared libraries exhibit this behaviour), we will need an expensive
#define OBJF_REORDERED (1 << 0) /* Functions are reordered */
/* Distinguish between an objfile for a shared library and a "vanilla"
- objfile. (If not set, the objfile may still actually be a solib.
+ objfile. (If not set, the objfile may still actually be a solib.
This can happen if the user created the objfile by using the
add-symbol-file command. GDB doesn't in that situation actually
check whether the file is a solib. Rather, the target's
#define OBJF_SHARED (1 << 1) /* From a shared library */
-/* User requested that this objfile be read in it's entirety. */
+/* User requested that this objfile be read in it's entirety. */
#define OBJF_READNOW (1 << 2) /* Immediate full read */
for run_command to remove old objfile entries which are no longer
valid (i.e., are associated with an old inferior), but to preserve
ones that the user explicitly loaded via the add-symbol-file
- command. */
+ command. */
#define OBJF_USERLOADED (1 << 3) /* User loaded */
+/* Set if we have tried to read partial symtabs for this objfile.
+ This is used to allow lazy reading of partial symtabs. */
+
+#define OBJF_PSYMTABS_READ (1 << 4)
+
/* The object file that contains the runtime common minimal symbols
- for SunOS4. Note that this objfile has no associated BFD. */
+ for SunOS4. Note that this objfile has no associated BFD. */
extern struct objfile *rt_common_objfile;
objfile, and when we are done, we set it back to NULL, to ensure that we
never put a type someplace other than where we are expecting to put it.
FIXME: Maybe we should review the entire type handling system and
- see if there is a better way to avoid this problem. */
+ see if there is a better way to avoid this problem. */
extern struct objfile *current_objfile;
/* This operation deletes all objfile entries that represent solibs that
weren't explicitly loaded by the user, via e.g., the add-symbol-file
- command.
- */
+ command. */
+
extern void objfile_purge_solibs (void);
/* Functions for dealing with the minimal symbol table, really a misc
loop's loop expression, advance OBJFILE, but iff the inner loop
reached its end. If not, there was a "break;", so leave OBJFILE
as is; the outer loop's conditional will break immediately as
- well (as OSECT will be different from OBJFILE->sections_end).
-*/
+ well (as OSECT will be different from OBJFILE->sections_end). */
#define ALL_OBJSECTIONS(objfile, osect) \
for ((objfile) = current_program_space->objfiles, \
: objfile->sect_index_text)
/* Sometimes the .bss section is missing from the objfile, so we don't
- want to die here. Let the users of SECT_OFF_BSS deal with an
- uninitialized section index. */
+ want to die here. Let the users of SECT_OFF_BSS deal with an
+ uninitialized section index. */
#define SECT_OFF_BSS(objfile) (objfile)->sect_index_bss
/* Answer whether there is more than one object file loaded. */
projects / deliverable / binutils-gdb.git / blobdiff