/* Target communications support for Macraigor Systems' On-Chip Debugging
- Copyright 1996, 1997 Free Software Foundation, Inc.
-This file is part of GDB.
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2004 Free
+ Software Foundation, Inc.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This file is part of GDB.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "gdbcore.h"
#include "bfd.h"
#include "symfile.h"
#include "target.h"
-#include "wait.h"
+#include "exceptions.h"
#include "gdbcmd.h"
#include "objfiles.h"
#include "gdb-stabs.h"
-#include "dcache.h"
#include <sys/types.h>
#include <signal.h>
#include "serial.h"
#include "ocd.h"
+#include "regcache.h"
/* Prototypes for local functions */
-static int ocd_read_bytes PARAMS ((CORE_ADDR memaddr,
- char *myaddr, int len));
-
-static int ocd_start_remote PARAMS ((PTR dummy));
-
-static int readchar PARAMS ((int timeout));
-
-static void reset_packet PARAMS ((void));
-
-static void output_packet PARAMS ((void));
+static int ocd_read_bytes (CORE_ADDR memaddr, char *myaddr, int len);
-static int get_quoted_char PARAMS ((int timeout));
+static int ocd_start_remote (void *dummy);
-static void put_quoted_char PARAMS ((int c));
+static int readchar (int timeout);
-static void ocd_interrupt PARAMS ((int signo));
+static void ocd_interrupt (int signo);
-static void ocd_interrupt_twice PARAMS ((int signo));
+static void ocd_interrupt_twice (int signo);
-static void interrupt_query PARAMS ((void));
+static void interrupt_query (void);
-static unsigned char * ocd_do_command PARAMS ((int cmd, int *statusp, int *lenp));
+static unsigned char *ocd_do_command (int cmd, int *statusp, int *lenp);
-static void ocd_put_packet PARAMS ((unsigned char *packet, int pktlen));
+static void ocd_put_packet (unsigned char *packet, int pktlen);
-static unsigned char * ocd_get_packet PARAMS ((int cmd, int *pktlen, int timeout));
+static unsigned char *ocd_get_packet (int cmd, int *pktlen, int timeout);
static struct target_ops *current_ops = NULL;
static int last_run_status;
-/* This was 5 seconds, which is a long time to sit and wait.
- Unless this is going though some terminal server or multiplexer or
- other form of hairy serial connection, I would think 2 seconds would
- be plenty. */
-
-#if 0
-/* FIXME: Change to allow option to set timeout value on a per target
- basis. */
-static int remote_timeout = 2;
-#endif
-
/* Descriptor for I/O to remote machine. Initialize it to NULL so that
ocd_open knows that we don't have a file open when the program
starts. */
-static serial_t ocd_desc = NULL;
+static struct serial *ocd_desc = NULL;
\f
void
-ocd_error (s, error_code)
- char *s;
- int error_code;
+ocd_error (char *s, int error_code)
{
char buf[100];
switch (error_code)
{
- case 0x1: s = "Unknown fault"; break;
- case 0x2: s = "Power failed"; break;
- case 0x3: s = "Cable disconnected"; break;
- case 0x4: s = "Couldn't enter OCD mode"; break;
- case 0x5: s = "Target stuck in reset"; break;
- case 0x6: s = "OCD hasn't been initialized"; break;
- case 0x7: s = "Write verify failed"; break;
- case 0x8: s = "Reg buff error (during MPC5xx fp reg read/write)"; break;
- case 0x9: s = "Invalid CPU register access attempt failed"; break;
- case 0x11: s = "Bus error"; break;
- case 0x12: s = "Checksum error"; break;
- case 0x13: s = "Illegal command"; break;
- case 0x14: s = "Parameter error"; break;
- case 0x15: s = "Internal error"; break;
- case 0x80: s = "Flash erase error"; break;
+ case 0x1:
+ s = "Unknown fault";
+ break;
+ case 0x2:
+ s = "Power failed";
+ break;
+ case 0x3:
+ s = "Cable disconnected";
+ break;
+ case 0x4:
+ s = "Couldn't enter OCD mode";
+ break;
+ case 0x5:
+ s = "Target stuck in reset";
+ break;
+ case 0x6:
+ s = "OCD hasn't been initialized";
+ break;
+ case 0x7:
+ s = "Write verify failed";
+ break;
+ case 0x8:
+ s = "Reg buff error (during MPC5xx fp reg read/write)";
+ break;
+ case 0x9:
+ s = "Invalid CPU register access attempt failed";
+ break;
+ case 0x11:
+ s = "Bus error";
+ break;
+ case 0x12:
+ s = "Checksum error";
+ break;
+ case 0x13:
+ s = "Illegal command";
+ break;
+ case 0x14:
+ s = "Parameter error";
+ break;
+ case 0x15:
+ s = "Internal error";
+ break;
+ case 0x80:
+ s = "Flash erase error";
+ break;
default:
sprintf (buf, "Unknown error code %d", error_code);
s = buf;
}
- error (s);
+ error (("%s"), s);
}
/* Return nonzero if the thread TH is still alive on the remote system. */
int
-ocd_thread_alive (th)
- int th;
+ocd_thread_alive (ptid_t th)
{
return 1;
}
\f
/* Clean up connection to a remote debugger. */
-/* ARGSUSED */
void
-ocd_close (quitting)
- int quitting;
+ocd_close (int quitting)
{
if (ocd_desc)
- SERIAL_CLOSE (ocd_desc);
+ serial_close (ocd_desc);
ocd_desc = NULL;
}
/* Stub for catch_errors. */
static int
-ocd_start_remote (dummy)
- PTR dummy;
+ocd_start_remote (void *dummy)
{
unsigned char buf[10], *p;
int pktlen;
int speed;
enum ocd_target_type target_type;
- target_type = *(enum ocd_target_type*)dummy;
+ target_type = *(enum ocd_target_type *) dummy;
- immediate_quit = 1; /* Allow user to interrupt it */
+ immediate_quit++; /* Allow user to interrupt it */
- SERIAL_SEND_BREAK (ocd_desc); /* Wake up the wiggler */
+ serial_send_break (ocd_desc); /* Wake up the wiggler */
speed = 80; /* Divide clock by 4000 */
p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
if (pktlen < 2)
- error ("Truncated response packet from OCD device");
+ error (_("Truncated response packet from OCD device"));
status = p[1];
error_code = p[2];
if (error_code != 0)
- ocd_error ("OCD_INIT:", error_code);
+ ocd_error (_("OCD_INIT:"), error_code);
ocd_do_command (OCD_AYT, &status, &pktlen);
p = ocd_do_command (OCD_GET_VERSION, &status, &pktlen);
- printf_unfiltered ("[Wiggler version %x.%x, capability 0x%x]\n",
+ printf_unfiltered (_("[Wiggler version %x.%x, capability 0x%x]\n"),
p[0], p[1], (p[2] << 16) | p[3]);
-#if 0
- /* Reset the target */
-
- ocd_do_command (OCD_RESET_RUN, &status, &pktlen);
-/* ocd_do_command (OCD_RESET, &status, &pktlen);*/
-#endif
-
/* If processor is still running, stop it. */
if (!(status & OCD_FLAG_BDM))
ocd_stop ();
-#if 1
/* When using a target box, we want to asynchronously return status when
target stops. The OCD_SET_CTL_FLAGS command is ignored by Wigglers.dll
when using a parallel Wiggler */
p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
if (pktlen < 2)
- error ("Truncated response packet from OCD device");
+ error (_("Truncated response packet from OCD device"));
status = p[1];
error_code = p[2];
if (error_code != 0)
ocd_error ("OCD_SET_CTL_FLAGS:", error_code);
-#endif
- immediate_quit = 0;
+ immediate_quit--;
/* This is really the job of start_remote however, that makes an assumption
that the target is about to print out a status message of some sort. That
flush_cached_frames ();
registers_changed ();
stop_pc = read_pc ();
- set_current_frame (create_new_frame (read_fp (), stop_pc));
- select_frame (get_current_frame (), 0);
- print_stack_frame (selected_frame, -1, 1);
+ print_stack_frame (get_selected_frame (NULL), 0, SRC_AND_LOC);
buf[0] = OCD_LOG_FILE;
- buf[1] = 3; /* close existing WIGGLERS.LOG */
+ buf[1] = 3; /* close existing WIGGLERS.LOG */
ocd_put_packet (buf, 2);
p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
buf[0] = OCD_LOG_FILE;
- buf[1] = 2; /* append to existing WIGGLERS.LOG */
+ buf[1] = 2; /* append to existing WIGGLERS.LOG */
ocd_put_packet (buf, 2);
p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
/* Open a connection to a remote debugger.
NAME is the filename used for communication. */
-static DCACHE *ocd_dcache;
-
void
-ocd_open (name, from_tty, target_type, ops)
- char *name;
- int from_tty;
- enum ocd_target_type target_type;
- struct target_ops *ops;
+ocd_open (char *name, int from_tty, enum ocd_target_type target_type,
+ struct target_ops *ops)
{
unsigned char buf[10], *p;
- int status;
int pktlen;
if (name == 0)
- error ("To open an OCD connection, you need to specify the\n\
-device the OCD device is attached to (e.g. /dev/ttya).");
+ error (_("To open an OCD connection, you need to specify the\n\
+device the OCD device is attached to (e.g. /dev/ttya)."));
target_preopen (from_tty);
unpush_target (current_ops);
- ocd_dcache = dcache_init (ocd_read_bytes, ocd_write_bytes);
-
- if (strncmp(name,"wiggler",7) == 0)
- {
- ocd_desc = SERIAL_OPEN ("ocd");
- if (!ocd_desc)
- perror_with_name (name);
-
- buf[0] = OCD_LOG_FILE;
- buf[1] = 1; /* open new or overwrite existing WIGGLERS.LOG */
- ocd_put_packet (buf, 2);
- p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
-
- buf[0] = OCD_SET_CONNECTION;
- buf[1] = 0x01; /* atoi (name[11]); */
- ocd_put_packet (buf, 2);
- p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
- }
- else /* not using Wigglers.dll */
- {
- ocd_desc = SERIAL_OPEN (name);
- if (!ocd_desc)
- perror_with_name (name);
- }
+ ocd_desc = serial_open (name);
+ if (!ocd_desc)
+ perror_with_name (name);
if (baud_rate != -1)
{
- if (SERIAL_SETBAUDRATE (ocd_desc, baud_rate))
+ if (serial_setbaudrate (ocd_desc, baud_rate))
{
- SERIAL_CLOSE (ocd_desc);
+ serial_close (ocd_desc);
perror_with_name (name);
}
}
- SERIAL_RAW (ocd_desc);
+ serial_raw (ocd_desc);
/* If there is something sitting in the buffer we might take it as a
response to a command, which would be bad. */
- SERIAL_FLUSH_INPUT (ocd_desc);
+ serial_flush_input (ocd_desc);
if (from_tty)
{
variables, especially since GDB will someday have a notion of debugging
several processes. */
- inferior_pid = 42000;
+ inferior_ptid = pid_to_ptid (42000);
/* Start the remote connection; if error (0), discard this target.
In particular, if the user quits, be sure to discard it
(we'd be in an inconsistent state otherwise). */
"Couldn't establish connection to remote target\n",
RETURN_MASK_ALL))
{
- pop_target();
- error ("Failed to connect to OCD.");
+ pop_target ();
+ error (_("Failed to connect to OCD."));
}
}
die when it hits one. */
void
-ocd_detach (args, from_tty)
- char *args;
- int from_tty;
+ocd_detach (char *args, int from_tty)
{
if (args)
- error ("Argument given to \"detach\" when remotely debugging.");
+ error (_("Argument given to \"detach\" when remotely debugging."));
pop_target ();
if (from_tty)
/* Tell the remote machine to resume. */
void
-ocd_resume (pid, step, siggnal)
- int pid, step;
- enum target_signal siggnal;
+ocd_resume (ptid_t ptid, int step, enum target_signal siggnal)
{
int pktlen;
- dcache_flush (ocd_dcache);
-
if (step)
ocd_do_command (OCD_STEP, &last_run_status, &pktlen);
else
}
\f
void
-ocd_stop ()
+ocd_stop (void)
{
int status;
int pktlen;
ocd_do_command (OCD_STOP, &status, &pktlen);
if (!(status & OCD_FLAG_BDM))
- error ("Can't stop target via BDM");
+ error (_("Can't stop target via BDM"));
}
static volatile int ocd_interrupt_flag;
packet. */
static void
-ocd_interrupt (signo)
- int signo;
+ocd_interrupt (int signo)
{
/* If this doesn't work, try more severe steps. */
signal (signo, ocd_interrupt_twice);
-
+
if (remote_debug)
printf_unfiltered ("ocd_interrupt called\n");
}
}
-static void (*ofunc)();
+static void (*ofunc) ();
/* The user typed ^C twice. */
static void
-ocd_interrupt_twice (signo)
- int signo;
+ocd_interrupt_twice (int signo)
{
signal (signo, ofunc);
-
+
interrupt_query ();
signal (signo, ocd_interrupt);
/* Ask the user what to do when an interrupt is received. */
static void
-interrupt_query ()
+interrupt_query (void)
{
target_terminal_ours ();
Give up (and stop debugging it)? "))
{
target_mourn_inferior ();
- return_to_top_level (RETURN_QUIT);
+ deprecated_throw_reason (RETURN_QUIT);
}
target_terminal_inferior ();
means in the case of this target). */
int
-ocd_wait ()
+ocd_wait (void)
{
unsigned char *p;
int error_code;
signal (SIGINT, ofunc);
if (pktlen < 2)
- error ("Truncated response packet from OCD device");
+ error (_("Truncated response packet from OCD device"));
last_run_status = p[1];
error_code = p[2];
ocd_error ("target_wait:", error_code);
if (last_run_status & OCD_FLAG_PWF)
- error ("OCD device lost VCC at BDM interface.");
+ error (_("OCD device lost VCC at BDM interface."));
else if (last_run_status & OCD_FLAG_CABLE_DISC)
- error ("OCD device cable appears to have been disconnected.");
+ error (_("OCD device cable appears to have been disconnected."));
}
if (ocd_interrupt_flag)
Returns a pointer to a static array containing the register contents. */
unsigned char *
-ocd_read_bdm_registers (first_bdm_regno, last_bdm_regno, reglen)
- int first_bdm_regno;
- int last_bdm_regno;
- int *reglen;
+ocd_read_bdm_registers (int first_bdm_regno, int last_bdm_regno, int *reglen)
{
unsigned char buf[10];
int i;
if (i > pktlen - 4
|| ((i & 3) != 0))
- error ("Register block size bad: %d", i);
+ error (_("Register block size bad: %d"), i);
*reglen = i;
/* Read register BDM_REGNO and returns its value ala read_register() */
CORE_ADDR
-ocd_read_bdm_register (bdm_regno)
- int bdm_regno;
+ocd_read_bdm_register (int bdm_regno)
{
int reglen;
unsigned char *p;
}
void
-ocd_write_bdm_registers (first_bdm_regno, regptr, reglen)
- int first_bdm_regno;
- unsigned char *regptr;
- int reglen;
+ocd_write_bdm_registers (int first_bdm_regno, unsigned char *regptr, int reglen)
{
unsigned char *buf;
unsigned char *p;
p = ocd_get_packet (OCD_WRITE_REGS, &pktlen, remote_timeout);
if (pktlen < 3)
- error ("Truncated response packet from OCD device");
+ error (_("Truncated response packet from OCD device"));
status = p[1];
error_code = p[2];
}
void
-ocd_write_bdm_register (bdm_regno, reg)
- int bdm_regno;
- CORE_ADDR reg;
+ocd_write_bdm_register (int bdm_regno, CORE_ADDR reg)
{
unsigned char buf[4];
ocd_write_bdm_registers (bdm_regno, buf, 4);
}
\f
-void
-ocd_prepare_to_store ()
+void
+ocd_prepare_to_store (void)
{
}
\f
static int write_mem_command = OCD_WRITE_MEM;
int
-ocd_write_bytes (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
+ocd_write_bytes (CORE_ADDR memaddr, char *myaddr, int len)
{
char buf[256 + 10];
unsigned char *p;
ocd_put_packet (buf, 8 + numbytes);
p = ocd_get_packet (OCD_WRITE_MEM, &pktlen, remote_timeout);
if (pktlen < 3)
- error ("Truncated response packet from OCD device");
+ error (_("Truncated response packet from OCD device"));
status = p[1];
error_code = p[2];
Returns number of bytes transferred, or 0 for error. */
static int
-ocd_read_bytes (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
+ocd_read_bytes (CORE_ADDR memaddr, char *myaddr, int len)
{
char buf[256 + 10];
unsigned char *p;
ocd_put_packet (buf, 7);
p = ocd_get_packet (OCD_READ_MEM, &pktlen, remote_timeout);
if (pktlen < 4)
- error ("Truncated response packet from OCD device");
+ error (_("Truncated response packet from OCD device"));
status = p[1];
error_code = p[2];
\f
/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
to or from debugger address MYADDR. Write to inferior if SHOULD_WRITE is
- nonzero. Returns length of data written or read; 0 for error. */
+ nonzero. Returns length of data written or read; 0 for error. TARGET
+ is ignored. */
-/* ARGSUSED */
int
-ocd_xfer_memory (memaddr, myaddr, len, should_write, target)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
- int should_write;
- struct target_ops *target; /* ignored */
+ocd_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int should_write,
+ struct mem_attrib *attrib, struct target_ops *target)
{
- return dcache_xfer_memory (ocd_dcache, memaddr, myaddr, len, should_write);
+ int res;
+
+ if (should_write)
+ res = ocd_write_bytes (memaddr, myaddr, len);
+ else
+ res = ocd_read_bytes (memaddr, myaddr, len);
+
+ return res;
}
\f
void
-ocd_files_info (ignore)
- struct target_ops *ignore;
+ocd_files_info (struct target_ops *ignore)
{
puts_filtered ("Debugging a target over a serial line.\n");
}
/* Read a single character from the remote side, handling wierd errors. */
static int
-readchar (timeout)
- int timeout;
+readchar (int timeout)
{
int ch;
- ch = SERIAL_READCHAR (ocd_desc, timeout);
+ ch = serial_readchar (ocd_desc, timeout);
switch (ch)
{
case SERIAL_EOF:
- error ("Remote connection closed");
+ error (_("Remote connection closed"));
case SERIAL_ERROR:
- perror_with_name ("Remote communication error");
+ perror_with_name (_("Remote communication error"));
case SERIAL_TIMEOUT:
default:
return ch;
}
}
-#if 0
-/* Read a character from the data stream, dequoting as necessary. SYN is
- treated special. Any SYNs appearing in the data stream are returned as the
- distinct value RAW_SYN (which has a value > 8 bits and therefore cannot be
- mistaken for real data). */
-
-static int
-get_quoted_char (timeout)
- int timeout;
-{
- int ch;
-
- ch = readchar (timeout);
-
- switch (ch)
- {
- case SERIAL_TIMEOUT:
- error ("Timeout in mid-packet, aborting");
- case SYN:
- return RAW_SYN;
- case DLE:
- ch = readchar (timeout);
- if (ch == SYN)
- return RAW_SYN;
- return ch & ~0100;
- default:
- return ch;
- }
-}
-
-static unsigned char pkt[256 * 2 + 10], *pktp; /* Worst case */
-
-static void
-reset_packet ()
-{
- pktp = pkt;
-}
-
-static void
-output_packet ()
-{
- if (SERIAL_WRITE (ocd_desc, pkt, pktp - pkt))
- perror_with_name ("output_packet: write failed");
-
- reset_packet ();
-}
-
-/* Output a quoted character. SYNs and DLEs are quoted. Everything else goes
- through untouched. */
-
-static void
-put_quoted_char (c)
- int c;
-{
- switch (c)
- {
- case SYN:
- case DLE:
- *pktp++ = DLE;
- c |= 0100;
- }
-
- *pktp++ = c;
-}
-
-/* Send a packet to the OCD device. The packet framed by a SYN character,
- a byte count and a checksum. The byte count only counts the number of
- bytes between the count and the checksum. A count of zero actually
- means 256. Any SYNs within the packet (including the checksum and
- count) must be quoted. The quote character must be quoted as well.
- Quoting is done by replacing the character with the two-character sequence
- DLE, {char} | 0100. Note that the quoting mechanism has no effect on the
- byte count. */
-
-static void
-stu_put_packet (buf, len)
- unsigned char *buf;
- int len;
-{
- unsigned char checksum;
- unsigned char c;
-
- if (len == 0 || len > 256)
- abort (); /* Can't represent 0 length packet */
-
- reset_packet ();
-
- checksum = 0;
-
- put_quoted_char (RAW_SYN);
-
- c = len;
-
- do
- {
- checksum += c;
-
- put_quoted_char (c);
-
- c = *buf++;
- }
- while (len-- > 0);
-
- put_quoted_char (-checksum & 0xff);
-
- output_packet ();
-}
-
-#else
-
/* Send a packet to the OCD device. The packet framed by a SYN character,
a byte count and a checksum. The byte count only counts the number of
bytes between the count and the checksum. A count of zero actually
byte count. */
static void
-ocd_put_packet (buf, len)
- unsigned char *buf;
- int len;
+ocd_put_packet (unsigned char *buf, int len)
{
unsigned char checksum;
unsigned char c;
unsigned char *packet, *packet_ptr;
- packet = alloca (len + 1 + 1); /* packet + SYN + checksum */
+ packet = alloca (len + 1 + 1); /* packet + SYN + checksum */
packet_ptr = packet;
checksum = 0;
}
*packet_ptr++ = -checksum;
- if (SERIAL_WRITE (ocd_desc, packet, packet_ptr - packet))
- perror_with_name ("output_packet: write failed");
-}
-#endif
-
-#if 0
-/* Get a packet from the OCD device. Timeout is only enforced for the
- first byte of the packet. Subsequent bytes are expected to arrive in
- time <= remote_timeout. Returns a pointer to a static buffer containing
- the payload of the packet. *LENP contains the length of the packet.
-*/
-
-static unsigned char *
-stu_get_packet (cmd, lenp, timeout)
- unsigned char cmd;
- int *lenp;
-{
- int ch;
- int len;
- static unsigned char buf[256 + 10], *p;
- unsigned char checksum;
-
- find_packet:
-
- ch = get_quoted_char (timeout);
-
- if (ch < 0)
- error ("get_packet (readchar): %d", ch);
-
- if (ch != RAW_SYN)
- goto find_packet;
-
- found_syn: /* Found the start of a packet */
-
- p = buf;
- checksum = 0;
-
- len = get_quoted_char (remote_timeout);
-
- if (len == RAW_SYN)
- goto found_syn;
-
- checksum += len;
-
- if (len == 0)
- len = 256;
-
- len++; /* Include checksum */
-
- while (len-- > 0)
- {
- ch = get_quoted_char (remote_timeout);
- if (ch == RAW_SYN)
- goto found_syn;
-
- *p++ = ch;
- checksum += ch;
- }
-
- if (checksum != 0)
- goto find_packet;
-
- if (cmd != buf[0])
- error ("Response phase error. Got 0x%x, expected 0x%x", buf[0], cmd);
-
- *lenp = p - buf - 1;
- return buf;
+ if (serial_write (ocd_desc, packet, packet_ptr - packet))
+ perror_with_name (_("output_packet: write failed"));
}
-#else
-
/* Get a packet from the OCD device. Timeout is only enforced for the
first byte of the packet. Subsequent bytes are expected to arrive in
time <= remote_timeout. Returns a pointer to a static buffer containing
the payload of the packet. *LENP contains the length of the packet.
-*/
+ */
static unsigned char *
-ocd_get_packet (cmd, lenp, timeout)
- int cmd;
- int *lenp;
+ocd_get_packet (int cmd, int *lenp, int timeout)
{
int ch;
int len;
- int i;
static unsigned char packet[512];
unsigned char *packet_ptr;
unsigned char checksum;
ch = readchar (timeout);
if (ch < 0)
- error ("ocd_get_packet (readchar): %d", ch);
+ error (_("ocd_get_packet (readchar): %d"), ch);
if (ch != 0x55)
- error ("ocd_get_packet (readchar): %d", ch);
+ error (_("ocd_get_packet (readchar): %d"), ch);
/* Found the start of a packet */
ch = readchar (timeout);
if (ch < 0)
- error ("ocd_get_packet (readchar): %d", ch);
+ error (_("ocd_get_packet (readchar): %d"), ch);
*packet_ptr++ = ch;
checksum += ch;
ch = readchar (timeout);
if (ch < 0)
- error ("ocd_get_packet (readchar): %d", ch);
+ error (_("ocd_get_packet (readchar): %d"), ch);
*packet_ptr++ = ch;
checksum += ch;
ch = readchar (timeout);
if (ch < 0)
- error ("ocd_get_packet (readchar): %d", ch);
+ error (_("ocd_get_packet (readchar): %d"), ch);
*packet_ptr++ = ch;
checksum += ch;
len = 8; /* write address, value read back */
break;
case 0x11: /* Bus error? */
- /* write address, read flag */
+ /* write address, read flag */
case 0x15: /* Internal error */
len = 5; /* error code, vector */
break;
case 0x0: /* Normal result */
switch (packet[0])
{
- case OCD_AYT: /* Are You There? */
- case OCD_SET_BAUD_RATE: /* Set Baud Rate */
- case OCD_INIT: /* Initialize OCD device */
+ case OCD_AYT: /* Are You There? */
+ case OCD_SET_BAUD_RATE: /* Set Baud Rate */
+ case OCD_INIT: /* Initialize OCD device */
case OCD_SET_SPEED: /* Set Speed */
- case OCD_SET_FUNC_CODE: /* Set Function Code */
- case OCD_SET_CTL_FLAGS: /* Set Control Flags */
- case OCD_SET_BUF_ADDR: /* Set Register Buffer Address */
- case OCD_RUN: /* Run Target from PC */
+ case OCD_SET_FUNC_CODE: /* Set Function Code */
+ case OCD_SET_CTL_FLAGS: /* Set Control Flags */
+ case OCD_SET_BUF_ADDR: /* Set Register Buffer Address */
+ case OCD_RUN: /* Run Target from PC */
case OCD_RUN_ADDR: /* Run Target from Specified Address */
- case OCD_STOP: /* Stop Target */
+ case OCD_STOP: /* Stop Target */
case OCD_RESET_RUN: /* Reset Target and Run */
case OCD_RESET: /* Reset Target and Halt */
- case OCD_STEP: /* Single Step */
- case OCD_WRITE_REGS: /* Write Register */
+ case OCD_STEP: /* Single Step */
+ case OCD_WRITE_REGS: /* Write Register */
case OCD_WRITE_MEM: /* Write Memory */
case OCD_FILL_MEM: /* Fill Memory */
case OCD_MOVE_MEM: /* Move Memory */
- case OCD_WRITE_INT_MEM: /* Write Internal Memory */
- case OCD_JUMP: /* Jump to Subroutine */
- case OCD_ERASE_FLASH: /* Erase flash memory */
- case OCD_PROGRAM_FLASH: /* Write flash memory */
+ case OCD_WRITE_INT_MEM: /* Write Internal Memory */
+ case OCD_JUMP: /* Jump to Subroutine */
+ case OCD_ERASE_FLASH: /* Erase flash memory */
+ case OCD_PROGRAM_FLASH: /* Write flash memory */
case OCD_EXIT_MON: /* Exit the flash programming monitor */
case OCD_ENTER_MON: /* Enter the flash programming monitor */
case OCD_LOG_FILE: /* Make Wigglers.dll save Wigglers.log */
- case OCD_SET_CONNECTION: /* Set type of connection in Wigglers.dll */
+ case OCD_SET_CONNECTION: /* Set type of connection in Wigglers.dll */
len = 0;
break;
- case OCD_GET_VERSION: /* Get Version */
+ case OCD_GET_VERSION: /* Get Version */
len = 10;
break;
- case OCD_GET_STATUS_MASK: /* Get Status Mask */
+ case OCD_GET_STATUS_MASK: /* Get Status Mask */
len = 1;
break;
case OCD_GET_CTRS: /* Get Error Counters */
case OCD_READ_REGS: /* Read Register */
case OCD_READ_MEM: /* Read Memory */
- case OCD_READ_INT_MEM: /* Read Internal Memory */
+ case OCD_READ_INT_MEM: /* Read Internal Memory */
len = 257;
break;
default:
- error ("ocd_get_packet: unknown packet type 0x%x\n", ch);
+ error (_("ocd_get_packet: unknown packet type 0x%x."), ch);
}
}
ch = readchar (timeout);
if (ch < 0)
- error ("ocd_get_packet (readchar): %d", ch);
+ error (_("ocd_get_packet (readchar): %d"), ch);
*packet_ptr++ = ch;
checksum += ch;
len = ch;
ch = readchar (timeout);
if (ch < 0)
- error ("ocd_get_packet (readchar): %d", ch);
+ error (_("ocd_get_packet (readchar): %d"), ch);
*packet_ptr++ = ch;
checksum += ch;
}
if (checksum != 0)
- error ("ocd_get_packet: bad packet checksum");
+ error (_("ocd_get_packet: bad packet checksum"));
if (cmd != -1 && cmd != packet[0])
- error ("Response phase error. Got 0x%x, expected 0x%x", packet[0], cmd);
+ error (_("Response phase error. Got 0x%x, expected 0x%x"), packet[0], cmd);
- *lenp = packet_ptr - packet - 1; /* Subtract checksum byte */
+ *lenp = packet_ptr - packet - 1; /* Subtract checksum byte */
return packet;
}
-#endif
/* Execute a simple (one-byte) command. Returns a pointer to the data
following the error code. */
static unsigned char *
-ocd_do_command (cmd, statusp, lenp)
- int cmd;
- int *statusp;
- int *lenp;
+ocd_do_command (int cmd, int *statusp, int *lenp)
{
unsigned char buf[100], *p;
int status, error_code;
int logpktlen;
buf[0] = cmd;
- ocd_put_packet (buf, 1); /* Send command */
+ ocd_put_packet (buf, 1); /* Send command */
p = ocd_get_packet (*buf, lenp, remote_timeout);
if (*lenp < 3)
- error ("Truncated response packet from OCD device");
+ error (_("Truncated response packet from OCD device"));
status = p[1];
error_code = p[2];
}
if (status & OCD_FLAG_PWF)
- error ("OCD device can't detect VCC at BDM interface.");
+ error (_("OCD device can't detect VCC at BDM interface."));
else if (status & OCD_FLAG_CABLE_DISC)
- error ("BDM cable appears to be disconnected.");
+ error (_("BDM cable appears to be disconnected."));
*statusp = status;
logbuf[0] = OCD_LOG_FILE;
- logbuf[1] = 3; /* close existing WIGGLERS.LOG */
+ logbuf[1] = 3; /* close existing WIGGLERS.LOG */
ocd_put_packet (logbuf, 2);
ocd_get_packet (logbuf[0], &logpktlen, remote_timeout);
logbuf[0] = OCD_LOG_FILE;
- logbuf[1] = 2; /* append to existing WIGGLERS.LOG */
+ logbuf[1] = 2; /* append to existing WIGGLERS.LOG */
ocd_put_packet (logbuf, 2);
ocd_get_packet (logbuf[0], &logpktlen, remote_timeout);
}
\f
void
-ocd_kill ()
+ocd_kill (void)
{
/* For some mysterious reason, wait_for_inferior calls kill instead of
mourn after it gets TARGET_WAITKIND_SIGNALLED. Work around it. */
}
void
-ocd_mourn ()
+ocd_mourn (void)
{
unpush_target (current_ops);
generic_mourn_inferior ();
the program at that point. */
void
-ocd_create_inferior (exec_file, args, env)
- char *exec_file;
- char *args;
- char **env;
+ocd_create_inferior (char *exec_file, char *args, char **env, int from_tty)
{
if (args && (*args != '\000'))
- error ("Args are not supported by BDM.");
+ error (_("Args are not supported by BDM."));
clear_proceed_status ();
proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0);
}
void
-ocd_load (args, from_tty)
- char *args;
- int from_tty;
+ocd_load (char *args, int from_tty)
{
generic_load (args, from_tty);
- inferior_pid = 0;
+ inferior_ptid = null_ptid;
/* This is necessary because many things were based on the PC at the time that
we attached to the monitor, which is no longer valid now that we have loaded
/* This should be defined for each target */
/* But we want to be able to compile this file for some configurations
not yet supported fully */
-
-#define BDM_BREAKPOINT {0x0,0x0,0x0,0x0} /* For ppc 8xx */
-#if 0
-#define BDM_BREAKPOINT {0x4a,0xfa} /* BGND insn used for CPU32 */
-#endif
+
+#define BDM_BREAKPOINT {0x0,0x0,0x0,0x0} /* For ppc 8xx */
/* BDM (at least on CPU32) uses a different breakpoint */
int
-ocd_insert_breakpoint (addr, contents_cache)
- CORE_ADDR addr;
- char *contents_cache;
+ocd_insert_breakpoint (CORE_ADDR addr, char *contents_cache)
{
static char break_insn[] = BDM_BREAKPOINT;
int val;
}
int
-ocd_remove_breakpoint (addr, contents_cache)
- CORE_ADDR addr;
- char *contents_cache;
+ocd_remove_breakpoint (CORE_ADDR addr, char *contents_cache)
{
static char break_insn[] = BDM_BREAKPOINT;
int val;
}
static void
-bdm_command (args, from_tty)
- char *args;
- int from_tty;
+bdm_command (char *args, int from_tty)
{
- error ("bdm command must be followed by `reset'");
+ error (_("bdm command must be followed by `reset'"));
}
static void
-bdm_reset_command (args, from_tty)
- char *args;
- int from_tty;
+bdm_reset_command (char *args, int from_tty)
{
int status, pktlen;
if (!ocd_desc)
- error ("Not connected to OCD device.");
+ error (_("Not connected to OCD device."));
ocd_do_command (OCD_RESET, &status, &pktlen);
- dcache_flush (ocd_dcache);
+ dcache_invalidate (target_dcache);
registers_changed ();
}
static void
-bdm_restart_command (args, from_tty)
- char *args;
- int from_tty;
+bdm_restart_command (char *args, int from_tty)
{
int status, pktlen;
if (!ocd_desc)
- error ("Not connected to OCD device.");
+ error (_("Not connected to OCD device."));
ocd_do_command (OCD_RESET_RUN, &status, &pktlen);
last_run_status = status;
generic_load from trying to set the PC. */
static void
-noop_store_registers (regno)
- int regno;
+noop_store_registers (int regno)
{
}
static void
-bdm_update_flash_command (args, from_tty)
- char *args;
- int from_tty;
+bdm_update_flash_command (char *args, int from_tty)
{
int status, pktlen;
- struct cleanup *old_chain;
- void (*store_registers_tmp) PARAMS ((int));
+ struct cleanup *old_chain;
+ void (*store_registers_tmp) (int);
if (!ocd_desc)
- error ("Not connected to OCD device.");
+ error (_("Not connected to OCD device."));
if (!args)
- error ("Must specify file containing new OCD code.");
+ error (_("Must specify file containing new OCD code."));
-/* old_chain = make_cleanup (flash_cleanup, 0);*/
+/* old_chain = make_cleanup (flash_cleanup, 0); */
ocd_do_command (OCD_ENTER_MON, &status, &pktlen);
ocd_do_command (OCD_EXIT_MON, &status, &pktlen);
-/* discard_cleanups (old_chain);*/
-}
-
-static void
-bdm_read_register_command (args, from_tty)
- char *args;
- int from_tty;
-{
- /* XXX repeat should go on to the next register */
-
- if (!ocd_desc)
- error ("Not connected to OCD device.");
-
- if (!args)
- error ("Must specify BDM register number.");
-
+/* discard_cleanups (old_chain); */
}
\f
+extern initialize_file_ftype _initialize_remote_ocd; /* -Wmissing-prototypes */
+
void
-_initialize_remote_ocd ()
+_initialize_remote_ocd (void)
{
extern struct cmd_list_element *cmdlist;
static struct cmd_list_element *ocd_cmd_list = NULL;
- add_show_from_set (add_set_cmd ("remotetimeout", no_class,
- var_integer, (char *)&remote_timeout,
- "Set timeout value for remote read.\n", &setlist),
- &showlist);
-
- add_prefix_cmd ("ocd", class_obscure, bdm_command, "", &ocd_cmd_list, "ocd ",
- 0, &cmdlist);
-
- add_cmd ("reset", class_obscure, bdm_reset_command, "", &ocd_cmd_list);
- add_cmd ("restart", class_obscure, bdm_restart_command, "", &ocd_cmd_list);
- add_cmd ("update-flash", class_obscure, bdm_update_flash_command, "", &ocd_cmd_list);
- /* add_cmd ("read-register", class_obscure, bdm_read_register_command, "", &ocd_cmd_list);*/
+ add_setshow_integer_cmd ("remotetimeout", no_class, &remote_timeout, _("\
+Set timeout value for remote read."), _("\
+Show timeout value for remote read."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ /* FIXME: i18n: What documentation? */
+ add_prefix_cmd ("ocd", class_obscure, bdm_command, (""), &ocd_cmd_list,
+ "ocd ", 0, &cmdlist);
+
+ /* FIXME: i18n: what documentation? */
+ add_cmd ("reset", class_obscure, bdm_reset_command, (""), &ocd_cmd_list);
+ add_cmd ("restart", class_obscure, bdm_restart_command, (""), &ocd_cmd_list);
+ add_cmd ("update-flash", class_obscure, bdm_update_flash_command, (""), &ocd_cmd_list);
}