along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/************************************************************************
- * *
- * NOTICE *
- * *
- * This file is still under construction. When it is complete, this *
- * notice will be removed. Until then, direct any questions or changes *
- * to Fred Fish at Cygnus Support (fnf@cygnus.com) *
- * *
- * FIXME Still needs support for shared libraries. *
- * FIXME Still needs support for core files. *
- * FIXME The ".debug" and ".line" section names are hardwired. *
- * *
- ************************************************************************/
-
#include "defs.h"
#include "bfd.h"
+#include <time.h> /* For time_t in libbfd.h. */
+#include <sys/types.h> /* For time_t, if not in time.h. */
#include "libbfd.h"
+#include "som.h"
#include "libhppa.h"
#include <syms.h>
#include "symtab.h"
#include "symfile.h"
#include "objfiles.h"
#include "buildsym.h"
+#include "stabsread.h"
#include "gdb-stabs.h"
#include "complaints.h"
#include <string.h>
#include "demangle.h"
#include <sys/file.h>
+
+/* Size of n_value and n_strx fields in a stab symbol. */
+#define BYTES_IN_WORD 4
+
#include "aout/aout64.h"
/* Various things we might complain about... */
static void
pa_new_init PARAMS ((struct objfile *));
+static void
+read_unwind_info PARAMS ((struct objfile *));
+
static void
pa_symfile_read PARAMS ((struct objfile *, struct section_offsets *, int));
struct objfile *objfile;
{
name = obsavestring (name, strlen (name), &objfile -> symbol_obstack);
- prim_record_minimal_symbol (name, address, ms_type);
+ prim_record_minimal_symbol (name, address, ms_type, objfile);
}
/*
unsigned int i;
int val;
char *stringtab;
- struct symbol_dictionary_record *buf, *bufp;
+ struct symbol_dictionary_record *buf, *bufp, *endbufp;
+ char *symname;
CONST int symsize = sizeof (struct symbol_dictionary_record);
number_of_symbols = bfd_get_symcount (abfd);
buf = alloca (symsize * number_of_symbols);
- bfd_seek (abfd, obj_sym_filepos (abfd), L_SET);
+ bfd_seek (abfd, obj_som_sym_filepos (abfd), L_SET);
val = bfd_read (buf, symsize * number_of_symbols, 1, abfd);
if (val != symsize * number_of_symbols)
error ("Couldn't read symbol dictionary!");
- stringtab = alloca (obj_stringtab_size (abfd));
- bfd_seek (abfd, obj_str_filepos (abfd), L_SET);
- val = bfd_read (stringtab, obj_stringtab_size (abfd), 1, abfd);
- if (val != obj_stringtab_size (abfd))
+ stringtab = alloca (obj_som_stringtab_size (abfd));
+ bfd_seek (abfd, obj_som_str_filepos (abfd), L_SET);
+ val = bfd_read (stringtab, obj_som_stringtab_size (abfd), 1, abfd);
+ if (val != obj_som_stringtab_size (abfd))
error ("Can't read in HP string table.");
-
- for (i = 0, bufp = buf; i < number_of_symbols; i++, bufp++)
+
+ endbufp = buf + number_of_symbols;
+ for (bufp = buf; bufp < endbufp; ++bufp)
{
enum minimal_symbol_type ms_type;
QUIT;
- if (bufp->symbol_scope != SS_UNIVERSAL)
- continue;
-
- switch (bufp->symbol_type)
- {
- case ST_SYM_EXT:
- case ST_ARG_EXT:
- continue;
- case ST_CODE:
- case ST_PRI_PROG:
- case ST_SEC_PROG:
- case ST_ENTRY:
- case ST_MILLICODE:
- ms_type = mst_text;
- bufp->symbol_value &= ~0x3; /* clear out permission bits */
- break;
- case ST_DATA:
- ms_type = mst_data;
- break;
- default:
- continue;
- }
-
- if (bufp->name.n_strx > obj_stringtab_size (abfd))
+ switch (bufp->symbol_scope)
+ {
+ case SS_UNIVERSAL:
+ switch (bufp->symbol_type)
+ {
+ case ST_SYM_EXT:
+ case ST_ARG_EXT:
+ continue;
+
+ case ST_CODE:
+ case ST_PRI_PROG:
+ case ST_SEC_PROG:
+ case ST_ENTRY:
+ case ST_MILLICODE:
+ symname = bufp->name.n_strx + stringtab;
+ ms_type = mst_text;
+ bufp->symbol_value &= ~0x3; /* clear out permission bits */
+ break;
+ case ST_DATA:
+ symname = bufp->name.n_strx + stringtab;
+ ms_type = mst_data;
+ break;
+ default:
+ continue;
+ }
+ break;
+
+#if 0
+ /* SS_GLOBAL and SS_LOCAL are two names for the same thing (!). */
+ case SS_GLOBAL:
+#endif
+ case SS_LOCAL:
+ switch (bufp->symbol_type)
+ {
+ case ST_SYM_EXT:
+ case ST_ARG_EXT:
+ continue;
+
+ case ST_CODE:
+ symname = bufp->name.n_strx + stringtab;
+ ms_type = mst_file_text;
+ bufp->symbol_value &= ~0x3; /* clear out permission bits */
+
+ check_strange_names:
+ /* GAS leaves labels in .o files after assembling. At
+ least labels starting with "LS$", "LBB$", "LBE$",
+ "LC$", and "L$" can happen. This should be fixed in
+ the assembler and/or compiler, to save space in the
+ executable (and because having GDB make gross
+ distinctions based on the name is kind of ugly), but
+ until then, just ignore them. ("L$" at least, has something
+ to do with getting relocation correct, so that one might
+ be hard to fix). */
+ if (*symname == 'L'
+ && (symname[1] == '$' || symname[2] == '$'
+ || symname[3] == '$'))
+ continue;
+ break;
+
+ case ST_PRI_PROG:
+ case ST_SEC_PROG:
+ case ST_ENTRY:
+ case ST_MILLICODE:
+ symname = bufp->name.n_strx + stringtab;
+ ms_type = mst_file_text;
+ bufp->symbol_value &= ~0x3; /* clear out permission bits */
+ break;
+
+ case ST_DATA:
+ symname = bufp->name.n_strx + stringtab;
+ ms_type = mst_file_data;
+ goto check_strange_names;
+
+ default:
+ continue;
+ }
+ break;
+
+ default:
+ continue;
+ }
+
+ if (bufp->name.n_strx > obj_som_stringtab_size (abfd))
error ("Invalid symbol data; bad HP string table offset: %d",
bufp->name.n_strx);
- record_minimal_symbol (bufp->name.n_strx + stringtab,
+ record_minimal_symbol (symname,
bufp->symbol_value, ms_type,
objfile);
}
install_minimal_symbols (objfile);
}
+/* Read in the backtrace information stored in the `$UNWIND_START$' section of
+ the object file. This info is used mainly by find_unwind_entry() to find
+ out the stack frame size and frame pointer used by procedures. We put
+ everything on the psymbol obstack in the objfile so that it automatically
+ gets freed when the objfile is destroyed. */
+
+static void
+read_unwind_info (objfile)
+ struct objfile *objfile;
+{
+ asection *unwind_sec;
+ struct obj_unwind_info *ui;
+
+ ui = obstack_alloc (&objfile->psymbol_obstack,
+ sizeof (struct obj_unwind_info));
+
+ ui->table = NULL;
+ ui->cache = NULL;
+ ui->last = -1;
+
+ unwind_sec = bfd_get_section_by_name (objfile->obfd,
+ "$UNWIND_START$");
+ if (unwind_sec)
+ {
+ int size;
+ int i, *ip;
+
+ size = bfd_section_size (objfile->obfd, unwind_sec);
+ ui->table = obstack_alloc (&objfile->psymbol_obstack, size);
+ ui->last = size / sizeof (struct unwind_table_entry) - 1;
+
+ bfd_get_section_contents (objfile->obfd, unwind_sec, ui->table,
+ 0, size);
+
+ OBJ_UNWIND_INFO (objfile) = ui;
+ }
+}
+
/* Scan and build partial symbols for a symbol file.
We have been initialized by a call to pa_symfile_init, which
currently does nothing.
pastab_build_psymtabs (objfile, section_offsets, mainline);
+ read_unwind_info(objfile);
+
do_cleanups (back_to);
}
-/* This cleans up the objfile's sym_private pointer, and the chain of
+/* This cleans up the objfile's sym_stab_info pointer, and the chain of
stab_section_info's, that might be dangling from it. */
static void
{
struct objfile *objfile = (struct objfile *)objp;
struct dbx_symfile_info *dbxinfo = (struct dbx_symfile_info *)
- objfile->sym_private;
+ objfile->sym_stab_info;
struct stab_section_info *ssi, *nssi;
ssi = dbxinfo->stab_section_info;
pa_symfile_finish (objfile)
struct objfile *objfile;
{
- if (objfile -> sym_private != NULL)
+ if (objfile -> sym_stab_info != NULL)
{
- mfree (objfile -> md, objfile -> sym_private);
+ mfree (objfile -> md, objfile -> sym_stab_info);
}
}
stringsect = bfd_get_section_by_name (sym_bfd, "$GDB_STRINGS$");
/* Allocate struct to keep track of the symfile */
- objfile->sym_private = (PTR)
+ objfile->sym_stab_info = (PTR)
xmmalloc (objfile -> md, sizeof (struct dbx_symfile_info));
- memset ((PTR) objfile->sym_private, 0, sizeof (struct dbx_symfile_info));
+ memset ((PTR) objfile->sym_stab_info, 0, sizeof (struct dbx_symfile_info));
- if (!stabsect)
- return;
-
- if (!stringsect)
- error ("Found stabs, but not string section");
/* FIXME POKING INSIDE BFD DATA STRUCTURES */
#define STRING_TABLE_OFFSET (stringsect->filepos)
/* FIXME POKING INSIDE BFD DATA STRUCTURES */
DBX_SYMFILE_INFO (objfile)->stab_section_info = NULL;
- DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
+ DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, "$TEXT$");
if (!DBX_TEXT_SECT (objfile))
- error ("Can't find .text section in symbol file");
+ error ("Can't find $TEXT$ section in symbol file");
+ if (!stabsect)
+ return;
+
+ if (!stringsect)
+ error ("Found stabs, but not string section");
+
+ /* FIXME: I suspect this should be external_nlist. The size of host
+ types like long and bfd_vma should not affect how we read the
+ file. */
DBX_SYMBOL_SIZE (objfile) = sizeof (struct internal_nlist);
DBX_SYMCOUNT (objfile) = bfd_section_size (sym_bfd, stabsect)
/ DBX_SYMBOL_SIZE (objfile);
perror_with_name (name);
val = bfd_read (DBX_STRINGTAB (objfile), DBX_STRINGTAB_SIZE (objfile), 1,
sym_bfd);
- if (val != DBX_STRINGTAB_SIZE (objfile))
+ if (val == 0)
+ error ("End of file reading string table");
+ else if (val < 0)
+ /* It's possible bfd_read should be setting bfd_error, and we should be
+ checking that. But currently it doesn't set bfd_error. */
perror_with_name (name);
+ else if (val != DBX_STRINGTAB_SIZE (objfile))
+ error ("Short read reading string table");
}
/* PA specific parsing routine for section offsets.
{
struct section_offsets *section_offsets;
int i;
-
+
+ objfile->num_sections = SECT_OFF_MAX;
section_offsets = (struct section_offsets *)
obstack_alloc (&objfile -> psymbol_obstack,
- sizeof (struct section_offsets) +
- sizeof (section_offsets->offsets) * (SECT_OFF_MAX-1));
+ sizeof (struct section_offsets)
+ + sizeof (section_offsets->offsets) * (SECT_OFF_MAX-1));
for (i = 0; i < SECT_OFF_MAX; i++)
ANOFFSET (section_offsets, i) = addr;
-
+
return section_offsets;
}
\f
-/* Register that we are able to handle PA object file formats. */
+/* Register that we are able to handle SOM object file formats. */
-/* This is probably a mistake. FIXME. Why can't the HP's use an ordinary
- file format name with an -hppa suffix? */
static struct sym_fns pa_sym_fns =
{
- "hppa", /* sym_name: name or name prefix of BFD target type */
- 4, /* sym_namelen: number of significant sym_name chars */
+ bfd_target_som_flavour,
pa_new_init, /* sym_new_init: init anything gbl to entire symtab */
pa_symfile_init, /* sym_init: read initial info, setup for sym_read() */
pa_symfile_read, /* sym_read: read a symbol file into symtab */