/* PPC GNU/Linux native support.
Copyright (C) 1988, 1989, 1991, 1992, 1994, 1996, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+ 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
This file is part of GDB.
#include "defs.h"
#include "gdb_string.h"
+#include "observer.h"
#include "frame.h"
#include "inferior.h"
+#include "gdbthread.h"
#include "gdbcore.h"
#include "regcache.h"
#include "gdb_assert.h"
#include "ppc-tdep.h"
#include "ppc-linux-tdep.h"
+/* Required when using the AUXV. */
+#include "elf/common.h"
+#include "auxv.h"
+
/* This sometimes isn't defined. */
#ifndef PT_ORIG_R3
#define PT_ORIG_R3 34
#define PT_TRAP 40
#endif
+/* The PPC_FEATURE_* defines should be provided by <asm/cputable.h>.
+ If they aren't, we can provide them ourselves (their values are fixed
+ because they are part of the kernel ABI). They are used in the AT_HWCAP
+ entry of the AUXV. */
+#ifndef PPC_FEATURE_CELL
+#define PPC_FEATURE_CELL 0x00010000
+#endif
+#ifndef PPC_FEATURE_BOOKE
+#define PPC_FEATURE_BOOKE 0x00008000
+#endif
+#ifndef PPC_FEATURE_HAS_DFP
+#define PPC_FEATURE_HAS_DFP 0x00000400 /* Decimal Floating Point. */
+#endif
+
/* Glibc's headers don't define PTRACE_GETVRREGS so we cannot use a
configure time check. Some older glibc's (for instance 2.2.1)
don't have a specific powerpc version of ptrace.h, and fall back on
#define PTRACE_SETVRREGS 19
#endif
+/* PTRACE requests for POWER7 VSX registers. */
+#ifndef PTRACE_GETVSXREGS
+#define PTRACE_GETVSXREGS 27
+#define PTRACE_SETVSXREGS 28
+#endif
/* Similarly for the ptrace requests for getting / setting the SPE
registers (ev0 -- ev31, acc, and spefscr). See the description of
#define PTRACE_SETEVRREGS 21
#endif
-/* Similarly for the hardware watchpoint support. */
+/* Similarly for the hardware watchpoint support. These requests are used
+ when the BookE kernel interface is not available. */
#ifndef PTRACE_GET_DEBUGREG
#define PTRACE_GET_DEBUGREG 25
#endif
#define PTRACE_GETSIGINFO 0x4202
#endif
+/* These requests are used when the BookE kernel interface is available.
+ It exposes the additional debug features of BookE processors, such as
+ ranged breakpoints and watchpoints and hardware-accelerated condition
+ evaluation. */
+#ifndef PPC_PTRACE_GETHWDBGINFO
+
+/* Not having PPC_PTRACE_GETHWDBGINFO defined means that the new BookE
+ interface is not present in ptrace.h, so we'll have to pretty much include
+ it all here so that the code at least compiles on older systems. */
+#define PPC_PTRACE_GETHWDBGINFO 0x89
+#define PPC_PTRACE_SETHWDEBUG 0x88
+#define PPC_PTRACE_DELHWDEBUG 0x87
+
+struct ppc_debug_info
+{
+ uint32_t version; /* Only version 1 exists to date */
+ uint32_t num_instruction_bps;
+ uint32_t num_data_bps;
+ uint32_t num_condition_regs;
+ uint32_t data_bp_alignment;
+ uint32_t sizeof_condition; /* size of the DVC register */
+ uint64_t features;
+};
+
+/* Features will have bits indicating whether there is support for: */
+#define PPC_DEBUG_FEATURE_INSN_BP_RANGE 0x1
+#define PPC_DEBUG_FEATURE_INSN_BP_MASK 0x2
+#define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x4
+#define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x8
+
+struct ppc_hw_breakpoint
+{
+ uint32_t version; /* currently, version must be 1 */
+ uint32_t trigger_type; /* only some combinations allowed */
+ uint32_t addr_mode; /* address match mode */
+ uint32_t condition_mode; /* break/watchpoint condition flags */
+ uint64_t addr; /* break/watchpoint address */
+ uint64_t addr2; /* range end or mask */
+ uint64_t condition_value; /* contents of the DVC register */
+};
+
+/* Trigger type. */
+#define PPC_BREAKPOINT_TRIGGER_EXECUTE 0x1
+#define PPC_BREAKPOINT_TRIGGER_READ 0x2
+#define PPC_BREAKPOINT_TRIGGER_WRITE 0x4
+#define PPC_BREAKPOINT_TRIGGER_RW 0x6
+
+/* Address mode. */
+#define PPC_BREAKPOINT_MODE_EXACT 0x0
+#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE 0x1
+#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE 0x2
+#define PPC_BREAKPOINT_MODE_MASK 0x3
+
+/* Condition mode. */
+#define PPC_BREAKPOINT_CONDITION_NONE 0x0
+#define PPC_BREAKPOINT_CONDITION_AND 0x1
+#define PPC_BREAKPOINT_CONDITION_EXACT 0x1
+#define PPC_BREAKPOINT_CONDITION_OR 0x2
+#define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
+#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000
+#define PPC_BREAKPOINT_CONDITION_BE_SHIFT 16
+#define PPC_BREAKPOINT_CONDITION_BE(n) \
+ (1<<((n)+PPC_BREAKPOINT_CONDITION_BE_SHIFT))
+#endif /* PPC_PTRACE_GETHWDBGINFO */
+
+
+
+/* Similarly for the general-purpose (gp0 -- gp31)
+ and floating-point registers (fp0 -- fp31). */
+#ifndef PTRACE_GETREGS
+#define PTRACE_GETREGS 12
+#endif
+#ifndef PTRACE_SETREGS
+#define PTRACE_SETREGS 13
+#endif
+#ifndef PTRACE_GETFPREGS
+#define PTRACE_GETFPREGS 14
+#endif
+#ifndef PTRACE_SETFPREGS
+#define PTRACE_SETFPREGS 15
+#endif
+
/* This oddity is because the Linux kernel defines elf_vrregset_t as
an array of 33 16 bytes long elements. I.e. it leaves out vrsave.
However the PTRACE_GETVRREGS and PTRACE_SETVRREGS requests return
typedef char gdb_vrregset_t[SIZEOF_VRREGS];
+/* This is the layout of the POWER7 VSX registers and the way they overlap
+ with the existing FPR and VMX registers.
+
+ VSR doubleword 0 VSR doubleword 1
+ ----------------------------------------------------------------
+ VSR[0] | FPR[0] | |
+ ----------------------------------------------------------------
+ VSR[1] | FPR[1] | |
+ ----------------------------------------------------------------
+ | ... | |
+ | ... | |
+ ----------------------------------------------------------------
+ VSR[30] | FPR[30] | |
+ ----------------------------------------------------------------
+ VSR[31] | FPR[31] | |
+ ----------------------------------------------------------------
+ VSR[32] | VR[0] |
+ ----------------------------------------------------------------
+ VSR[33] | VR[1] |
+ ----------------------------------------------------------------
+ | ... |
+ | ... |
+ ----------------------------------------------------------------
+ VSR[62] | VR[30] |
+ ----------------------------------------------------------------
+ VSR[63] | VR[31] |
+ ----------------------------------------------------------------
+
+ VSX has 64 128bit registers. The first 32 registers overlap with
+ the FP registers (doubleword 0) and hence extend them with additional
+ 64 bits (doubleword 1). The other 32 regs overlap with the VMX
+ registers. */
+#define SIZEOF_VSXREGS 32*8
+
+typedef char gdb_vsxregset_t[SIZEOF_VSXREGS];
/* On PPC processors that support the the Signal Processing Extension
(SPE) APU, the general-purpose registers are 64 bits long.
unsigned long spefscr;
};
+/* Non-zero if our kernel may support the PTRACE_GETVSXREGS and
+ PTRACE_SETVSXREGS requests, for reading and writing the VSX
+ POWER7 registers 0 through 31. Zero if we've tried one of them and
+ gotten an error. Note that VSX registers 32 through 63 overlap
+ with VR registers 0 through 31. */
+int have_ptrace_getsetvsxregs = 1;
/* Non-zero if our kernel may support the PTRACE_GETVRREGS and
PTRACE_SETVRREGS requests, for reading and writing the Altivec
error. */
int have_ptrace_getsetevrregs = 1;
+/* Non-zero if our kernel may support the PTRACE_GETREGS and
+ PTRACE_SETREGS requests, for reading and writing the
+ general-purpose registers. Zero if we've tried one of
+ them and gotten an error. */
+int have_ptrace_getsetregs = 1;
+
+/* Non-zero if our kernel may support the PTRACE_GETFPREGS and
+ PTRACE_SETFPREGS requests, for reading and writing the
+ floating-pointers registers. Zero if we've tried one of
+ them and gotten an error. */
+int have_ptrace_getsetfpregs = 1;
+
/* *INDENT-OFF* */
/* registers layout, as presented by the ptrace interface:
PT_R0, PT_R1, PT_R2, PT_R3, PT_R4, PT_R5, PT_R6, PT_R7,
kernel headers incorrectly contained the 32-bit definition of
PT_FPSCR. For the 32-bit definition, floating-point
registers occupy two 32-bit "slots", and the FPSCR lives in
- the secondhalf of such a slot-pair (hence +1). For 64-bit,
+ the second half of such a slot-pair (hence +1). For 64-bit,
the FPSCR instead occupies the full 64-bit 2-word-slot and
hence no adjustment is necessary. Hack around this. */
if (wordsize == 8 && PT_FPSCR == (48 + 32 + 1))
u_addr = (48 + 32) * wordsize;
+ /* If the FPSCR is 64-bit wide, we need to fetch the whole 64-bit
+ slot and not just its second word. The PT_FPSCR supplied when
+ GDB is compiled as a 32-bit app doesn't reflect this. */
+ else if (wordsize == 4 && register_size (gdbarch, regno) == 8
+ && PT_FPSCR == (48 + 2*32 + 1))
+ u_addr = (48 + 2*32) * wordsize;
else
u_addr = PT_FPSCR * wordsize;
}
return u_addr;
}
+/* The Linux kernel ptrace interface for POWER7 VSX registers uses the
+ registers set mechanism, as opposed to the interface for all the
+ other registers, that stores/fetches each register individually. */
+static void
+fetch_vsx_register (struct regcache *regcache, int tid, int regno)
+{
+ int ret;
+ gdb_vsxregset_t regs;
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ int vsxregsize = register_size (gdbarch, tdep->ppc_vsr0_upper_regnum);
+
+ ret = ptrace (PTRACE_GETVSXREGS, tid, 0, ®s);
+ if (ret < 0)
+ {
+ if (errno == EIO)
+ {
+ have_ptrace_getsetvsxregs = 0;
+ return;
+ }
+ perror_with_name (_("Unable to fetch VSX register"));
+ }
+
+ regcache_raw_supply (regcache, regno,
+ regs + (regno - tdep->ppc_vsr0_upper_regnum)
+ * vsxregsize);
+}
+
/* The Linux kernel ptrace interface for AltiVec registers uses the
registers set mechanism, as opposed to the interface for all the
other registers, that stores/fetches each register individually. */
AltiVec registers, fall through and return zeroes, because
regaddr will be -1 in this case. */
}
+ if (vsx_register_p (gdbarch, regno))
+ {
+ if (have_ptrace_getsetvsxregs)
+ {
+ fetch_vsx_register (regcache, tid, regno);
+ return;
+ }
+ }
else if (spe_register_p (gdbarch, regno))
{
fetch_spe_register (regcache, tid, regno);
gdbarch_byte_order (gdbarch));
}
+static void
+supply_vsxregset (struct regcache *regcache, gdb_vsxregset_t *vsxregsetp)
+{
+ int i;
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ int vsxregsize = register_size (gdbarch, tdep->ppc_vsr0_upper_regnum);
+
+ for (i = 0; i < ppc_num_vshrs; i++)
+ {
+ regcache_raw_supply (regcache, tdep->ppc_vsr0_upper_regnum + i,
+ *vsxregsetp + i * vsxregsize);
+ }
+}
+
static void
supply_vrregset (struct regcache *regcache, gdb_vrregset_t *vrregsetp)
{
}
}
+static void
+fetch_vsx_registers (struct regcache *regcache, int tid)
+{
+ int ret;
+ gdb_vsxregset_t regs;
+
+ ret = ptrace (PTRACE_GETVSXREGS, tid, 0, ®s);
+ if (ret < 0)
+ {
+ if (errno == EIO)
+ {
+ have_ptrace_getsetvsxregs = 0;
+ return;
+ }
+ perror_with_name (_("Unable to fetch VSX registers"));
+ }
+ supply_vsxregset (regcache, ®s);
+}
+
static void
fetch_altivec_registers (struct regcache *regcache, int tid)
{
supply_vrregset (regcache, ®s);
}
+/* This function actually issues the request to ptrace, telling
+ it to get all general-purpose registers and put them into the
+ specified regset.
+
+ If the ptrace request does not exist, this function returns 0
+ and properly sets the have_ptrace_* flag. If the request fails,
+ this function calls perror_with_name. Otherwise, if the request
+ succeeds, then the regcache gets filled and 1 is returned. */
+static int
+fetch_all_gp_regs (struct regcache *regcache, int tid)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ gdb_gregset_t gregset;
+
+ if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0)
+ {
+ if (errno == EIO)
+ {
+ have_ptrace_getsetregs = 0;
+ return 0;
+ }
+ perror_with_name (_("Couldn't get general-purpose registers."));
+ }
+
+ supply_gregset (regcache, (const gdb_gregset_t *) &gregset);
+
+ return 1;
+}
+
+/* This is a wrapper for the fetch_all_gp_regs function. It is
+ responsible for verifying if this target has the ptrace request
+ that can be used to fetch all general-purpose registers at one
+ shot. If it doesn't, then we should fetch them using the
+ old-fashioned way, which is to iterate over the registers and
+ request them one by one. */
+static void
+fetch_gp_regs (struct regcache *regcache, int tid)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ int i;
+
+ if (have_ptrace_getsetregs)
+ if (fetch_all_gp_regs (regcache, tid))
+ return;
+
+ /* If we've hit this point, it doesn't really matter which
+ architecture we are using. We just need to read the
+ registers in the "old-fashioned way". */
+ for (i = 0; i < ppc_num_gprs; i++)
+ fetch_register (regcache, tid, tdep->ppc_gp0_regnum + i);
+}
+
+/* This function actually issues the request to ptrace, telling
+ it to get all floating-point registers and put them into the
+ specified regset.
+
+ If the ptrace request does not exist, this function returns 0
+ and properly sets the have_ptrace_* flag. If the request fails,
+ this function calls perror_with_name. Otherwise, if the request
+ succeeds, then the regcache gets filled and 1 is returned. */
+static int
+fetch_all_fp_regs (struct regcache *regcache, int tid)
+{
+ gdb_fpregset_t fpregs;
+
+ if (ptrace (PTRACE_GETFPREGS, tid, 0, (void *) &fpregs) < 0)
+ {
+ if (errno == EIO)
+ {
+ have_ptrace_getsetfpregs = 0;
+ return 0;
+ }
+ perror_with_name (_("Couldn't get floating-point registers."));
+ }
+
+ supply_fpregset (regcache, (const gdb_fpregset_t *) &fpregs);
+
+ return 1;
+}
+
+/* This is a wrapper for the fetch_all_fp_regs function. It is
+ responsible for verifying if this target has the ptrace request
+ that can be used to fetch all floating-point registers at one
+ shot. If it doesn't, then we should fetch them using the
+ old-fashioned way, which is to iterate over the registers and
+ request them one by one. */
+static void
+fetch_fp_regs (struct regcache *regcache, int tid)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ int i;
+
+ if (have_ptrace_getsetfpregs)
+ if (fetch_all_fp_regs (regcache, tid))
+ return;
+
+ /* If we've hit this point, it doesn't really matter which
+ architecture we are using. We just need to read the
+ registers in the "old-fashioned way". */
+ for (i = 0; i < ppc_num_fprs; i++)
+ fetch_register (regcache, tid, tdep->ppc_fp0_regnum + i);
+}
+
static void
fetch_ppc_registers (struct regcache *regcache, int tid)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- for (i = 0; i < ppc_num_gprs; i++)
- fetch_register (regcache, tid, tdep->ppc_gp0_regnum + i);
+ fetch_gp_regs (regcache, tid);
if (tdep->ppc_fp0_regnum >= 0)
- for (i = 0; i < ppc_num_fprs; i++)
- fetch_register (regcache, tid, tdep->ppc_fp0_regnum + i);
+ fetch_fp_regs (regcache, tid);
fetch_register (regcache, tid, gdbarch_pc_regnum (gdbarch));
if (tdep->ppc_ps_regnum != -1)
fetch_register (regcache, tid, tdep->ppc_ps_regnum);
if (have_ptrace_getvrregs)
if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1)
fetch_altivec_registers (regcache, tid);
+ if (have_ptrace_getsetvsxregs)
+ if (tdep->ppc_vsr0_upper_regnum != -1)
+ fetch_vsx_registers (regcache, tid);
if (tdep->ppc_ev0_upper_regnum >= 0)
fetch_spe_register (regcache, tid, -1);
}
regno == -1, otherwise fetch all general registers or all floating
point registers depending upon the value of regno. */
static void
-ppc_linux_fetch_inferior_registers (struct regcache *regcache, int regno)
+ppc_linux_fetch_inferior_registers (struct target_ops *ops,
+ struct regcache *regcache, int regno)
{
/* Overload thread id onto process id */
int tid = TIDGET (inferior_ptid);
fetch_register (regcache, tid, regno);
}
+/* Store one VSX register. */
+static void
+store_vsx_register (const struct regcache *regcache, int tid, int regno)
+{
+ int ret;
+ gdb_vsxregset_t regs;
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ int vsxregsize = register_size (gdbarch, tdep->ppc_vsr0_upper_regnum);
+
+ ret = ptrace (PTRACE_GETVSXREGS, tid, 0, ®s);
+ if (ret < 0)
+ {
+ if (errno == EIO)
+ {
+ have_ptrace_getsetvsxregs = 0;
+ return;
+ }
+ perror_with_name (_("Unable to fetch VSX register"));
+ }
+
+ regcache_raw_collect (regcache, regno, regs +
+ (regno - tdep->ppc_vsr0_upper_regnum) * vsxregsize);
+
+ ret = ptrace (PTRACE_SETVSXREGS, tid, 0, ®s);
+ if (ret < 0)
+ perror_with_name (_("Unable to store VSX register"));
+}
+
/* Store one register. */
static void
store_altivec_register (const struct regcache *regcache, int tid, int regno)
store_altivec_register (regcache, tid, regno);
return;
}
+ if (vsx_register_p (gdbarch, regno))
+ {
+ store_vsx_register (regcache, tid, regno);
+ return;
+ }
else if (spe_register_p (gdbarch, regno))
{
store_spe_register (regcache, tid, regno);
}
}
+static void
+fill_vsxregset (const struct regcache *regcache, gdb_vsxregset_t *vsxregsetp)
+{
+ int i;
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ int vsxregsize = register_size (gdbarch, tdep->ppc_vsr0_upper_regnum);
+
+ for (i = 0; i < ppc_num_vshrs; i++)
+ regcache_raw_collect (regcache, tdep->ppc_vsr0_upper_regnum + i,
+ *vsxregsetp + i * vsxregsize);
+}
+
static void
fill_vrregset (const struct regcache *regcache, gdb_vrregset_t *vrregsetp)
{
}
}
+static void
+store_vsx_registers (const struct regcache *regcache, int tid)
+{
+ int ret;
+ gdb_vsxregset_t regs;
+
+ ret = ptrace (PTRACE_GETVSXREGS, tid, 0, ®s);
+ if (ret < 0)
+ {
+ if (errno == EIO)
+ {
+ have_ptrace_getsetvsxregs = 0;
+ return;
+ }
+ perror_with_name (_("Couldn't get VSX registers"));
+ }
+
+ fill_vsxregset (regcache, ®s);
+
+ if (ptrace (PTRACE_SETVSXREGS, tid, 0, ®s) < 0)
+ perror_with_name (_("Couldn't write VSX registers"));
+}
+
static void
store_altivec_registers (const struct regcache *regcache, int tid)
{
perror_with_name (_("Couldn't write AltiVec registers"));
}
+/* This function actually issues the request to ptrace, telling
+ it to store all general-purpose registers present in the specified
+ regset.
+
+ If the ptrace request does not exist, this function returns 0
+ and properly sets the have_ptrace_* flag. If the request fails,
+ this function calls perror_with_name. Otherwise, if the request
+ succeeds, then the regcache is stored and 1 is returned. */
+static int
+store_all_gp_regs (const struct regcache *regcache, int tid, int regno)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ gdb_gregset_t gregset;
+
+ if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0)
+ {
+ if (errno == EIO)
+ {
+ have_ptrace_getsetregs = 0;
+ return 0;
+ }
+ perror_with_name (_("Couldn't get general-purpose registers."));
+ }
+
+ fill_gregset (regcache, &gregset, regno);
+
+ if (ptrace (PTRACE_SETREGS, tid, 0, (void *) &gregset) < 0)
+ {
+ if (errno == EIO)
+ {
+ have_ptrace_getsetregs = 0;
+ return 0;
+ }
+ perror_with_name (_("Couldn't set general-purpose registers."));
+ }
+
+ return 1;
+}
+
+/* This is a wrapper for the store_all_gp_regs function. It is
+ responsible for verifying if this target has the ptrace request
+ that can be used to store all general-purpose registers at one
+ shot. If it doesn't, then we should store them using the
+ old-fashioned way, which is to iterate over the registers and
+ store them one by one. */
static void
-store_ppc_registers (const struct regcache *regcache, int tid)
+store_gp_regs (const struct regcache *regcache, int tid, int regno)
{
- int i;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
-
+ int i;
+
+ if (have_ptrace_getsetregs)
+ if (store_all_gp_regs (regcache, tid, regno))
+ return;
+
+ /* If we hit this point, it doesn't really matter which
+ architecture we are using. We just need to store the
+ registers in the "old-fashioned way". */
for (i = 0; i < ppc_num_gprs; i++)
store_register (regcache, tid, tdep->ppc_gp0_regnum + i);
+}
+
+/* This function actually issues the request to ptrace, telling
+ it to store all floating-point registers present in the specified
+ regset.
+
+ If the ptrace request does not exist, this function returns 0
+ and properly sets the have_ptrace_* flag. If the request fails,
+ this function calls perror_with_name. Otherwise, if the request
+ succeeds, then the regcache is stored and 1 is returned. */
+static int
+store_all_fp_regs (const struct regcache *regcache, int tid, int regno)
+{
+ gdb_fpregset_t fpregs;
+
+ if (ptrace (PTRACE_GETFPREGS, tid, 0, (void *) &fpregs) < 0)
+ {
+ if (errno == EIO)
+ {
+ have_ptrace_getsetfpregs = 0;
+ return 0;
+ }
+ perror_with_name (_("Couldn't get floating-point registers."));
+ }
+
+ fill_fpregset (regcache, &fpregs, regno);
+
+ if (ptrace (PTRACE_SETFPREGS, tid, 0, (void *) &fpregs) < 0)
+ {
+ if (errno == EIO)
+ {
+ have_ptrace_getsetfpregs = 0;
+ return 0;
+ }
+ perror_with_name (_("Couldn't set floating-point registers."));
+ }
+
+ return 1;
+}
+
+/* This is a wrapper for the store_all_fp_regs function. It is
+ responsible for verifying if this target has the ptrace request
+ that can be used to store all floating-point registers at one
+ shot. If it doesn't, then we should store them using the
+ old-fashioned way, which is to iterate over the registers and
+ store them one by one. */
+static void
+store_fp_regs (const struct regcache *regcache, int tid, int regno)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ int i;
+
+ if (have_ptrace_getsetfpregs)
+ if (store_all_fp_regs (regcache, tid, regno))
+ return;
+
+ /* If we hit this point, it doesn't really matter which
+ architecture we are using. We just need to store the
+ registers in the "old-fashioned way". */
+ for (i = 0; i < ppc_num_fprs; i++)
+ store_register (regcache, tid, tdep->ppc_fp0_regnum + i);
+}
+
+static void
+store_ppc_registers (const struct regcache *regcache, int tid)
+{
+ int i;
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ store_gp_regs (regcache, tid, -1);
if (tdep->ppc_fp0_regnum >= 0)
- for (i = 0; i < ppc_num_fprs; i++)
- store_register (regcache, tid, tdep->ppc_fp0_regnum + i);
+ store_fp_regs (regcache, tid, -1);
store_register (regcache, tid, gdbarch_pc_regnum (gdbarch));
if (tdep->ppc_ps_regnum != -1)
store_register (regcache, tid, tdep->ppc_ps_regnum);
if (have_ptrace_getvrregs)
if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1)
store_altivec_registers (regcache, tid);
+ if (have_ptrace_getsetvsxregs)
+ if (tdep->ppc_vsr0_upper_regnum != -1)
+ store_vsx_registers (regcache, tid);
if (tdep->ppc_ev0_upper_regnum >= 0)
store_spe_register (regcache, tid, -1);
}
-static int
-ppc_linux_check_watch_resources (int type, int cnt, int ot)
+/* Fetch the AT_HWCAP entry from the aux vector. */
+unsigned long ppc_linux_get_hwcap (void)
{
- int tid;
- ptid_t ptid = inferior_ptid;
-
- /* DABR (data address breakpoint register) is optional for PPC variants.
- Some variants have one DABR, others have none. So CNT can't be larger
- than 1. */
- if (cnt > 1)
- return 0;
+ CORE_ADDR field;
- /* We need to know whether ptrace supports PTRACE_SET_DEBUGREG and whether
- the target has DABR. If either answer is no, the ptrace call will
- return -1. Fail in that case. */
- tid = TIDGET (ptid);
- if (tid == 0)
- tid = PIDGET (ptid);
+ if (target_auxv_search (¤t_target, AT_HWCAP, &field))
+ return (unsigned long) field;
- if (ptrace (PTRACE_SET_DEBUGREG, tid, 0, 0) == -1)
- return 0;
- return 1;
+ return 0;
}
-static int
-ppc_linux_region_ok_for_hw_watchpoint (CORE_ADDR addr, int len)
-{
- /* Handle sub-8-byte quantities. */
- if (len <= 0)
- return 0;
+/* The cached DABR value, to install in new threads.
+ This variable is used when we are dealing with non-BookE
+ processors. */
+static long saved_dabr_value;
- /* addr+len must fall in the 8 byte watchable region. */
- if ((addr + len) > (addr & ~7) + 8)
- return 0;
+/* Global structure that will store information about the available
+ features on this BookE processor. */
+static struct ppc_debug_info booke_debug_info;
- return 1;
-}
+/* Global variable that holds the maximum number of slots that the
+ kernel will use. This is only used when the processor is BookE. */
+static size_t max_slots_number = 0;
-/* The cached DABR value, to install in new threads. */
-static long saved_dabr_value;
+struct hw_break_tuple
+{
+ long slot;
+ struct ppc_hw_breakpoint *hw_break;
+};
-/* Set a watchpoint of type TYPE at address ADDR. */
+/* This is an internal VEC created to store information about *points inserted
+ for each thread. This is used for BookE processors. */
+typedef struct thread_points
+ {
+ /* The TID to which this *point relates. */
+ int tid;
+ /* Information about the *point, such as its address, type, etc.
+
+ Each element inside this vector corresponds to a hardware
+ breakpoint or watchpoint in the thread represented by TID. The maximum
+ size of these vector is MAX_SLOTS_NUMBER. If the hw_break element of
+ the tuple is NULL, then the position in the vector is free. */
+ struct hw_break_tuple *hw_breaks;
+ } *thread_points_p;
+DEF_VEC_P (thread_points_p);
+
+VEC(thread_points_p) *ppc_threads = NULL;
+
+/* The version of the kernel interface that we will use if the processor is
+ BookE. */
+#define PPC_DEBUG_CURRENT_VERSION 1
+
+/* Returns non-zero if we support the ptrace interface which enables
+ booke debugging resources. */
static int
-ppc_linux_insert_watchpoint (CORE_ADDR addr, int len, int rw)
+have_ptrace_booke_interface (void)
{
- struct lwp_info *lp;
- ptid_t ptid;
- long dabr_value;
+ static int have_ptrace_booke_interface = -1;
- dabr_value = addr & ~7;
- switch (rw)
+ if (have_ptrace_booke_interface == -1)
{
- case hw_read:
- /* Set read and translate bits. */
- dabr_value |= 5;
- break;
- case hw_write:
- /* Set write and translate bits. */
- dabr_value |= 6;
- break;
- case hw_access:
- /* Set read, write and translate bits. */
- dabr_value |= 7;
- break;
+ int tid;
+
+ tid = TIDGET (inferior_ptid);
+ if (tid == 0)
+ tid = PIDGET (inferior_ptid);
+
+ /* Check for kernel support for BOOKE debug registers. */
+ if (ptrace (PPC_PTRACE_GETHWDBGINFO, tid, 0, &booke_debug_info) >= 0)
+ {
+ have_ptrace_booke_interface = 1;
+ max_slots_number = booke_debug_info.num_instruction_bps
+ + booke_debug_info.num_data_bps + booke_debug_info.num_condition_regs;
+ }
+ else
+ {
+ /* Old school interface and no BOOKE debug registers support. */
+ have_ptrace_booke_interface = 0;
+ memset (&booke_debug_info, 0, sizeof (struct ppc_debug_info));
+ }
+ }
+
+ return have_ptrace_booke_interface;
+}
+
+static int
+ppc_linux_can_use_hw_breakpoint (int type, int cnt, int ot)
+{
+ int total_hw_wp, total_hw_bp;
+
+ if (have_ptrace_booke_interface ())
+ {
+ /* For PPC BookE processors, the number of available hardware
+ watchpoints and breakpoints is stored at the booke_debug_info
+ struct. */
+ total_hw_bp = booke_debug_info.num_instruction_bps;
+ total_hw_wp = booke_debug_info.num_data_bps;
}
+ else
+ {
+ /* For PPC server processors, we accept 1 hardware watchpoint and 0
+ hardware breakpoints. */
+ total_hw_bp = 0;
+ total_hw_wp = 1;
+ }
+
+ if (type == bp_hardware_watchpoint || type == bp_read_watchpoint
+ || type == bp_access_watchpoint || type == bp_watchpoint)
+ {
+ if (cnt > total_hw_wp)
+ return -1;
+ }
+ else if (type == bp_hardware_breakpoint)
+ {
+ if (cnt > total_hw_bp)
+ return -1;
+ }
+
+ if (!have_ptrace_booke_interface ())
+ {
+ int tid;
+ ptid_t ptid = inferior_ptid;
+
+ /* We need to know whether ptrace supports PTRACE_SET_DEBUGREG and whether
+ the target has DABR. If either answer is no, the ptrace call will
+ return -1. Fail in that case. */
+ tid = TIDGET (ptid);
+ if (tid == 0)
+ tid = PIDGET (ptid);
+
+ if (ptrace (PTRACE_SET_DEBUGREG, tid, 0, 0) == -1)
+ return 0;
+ }
+
+ return 1;
+}
- saved_dabr_value = dabr_value;
+static int
+ppc_linux_region_ok_for_hw_watchpoint (CORE_ADDR addr, int len)
+{
+ /* Handle sub-8-byte quantities. */
+ if (len <= 0)
+ return 0;
+
+ /* The new BookE ptrace interface tells if there are alignment restrictions
+ for watchpoints in the processors. In that case, we use that information
+ to determine the hardcoded watchable region for watchpoints. */
+ if (have_ptrace_booke_interface ())
+ {
+ if (booke_debug_info.data_bp_alignment
+ && (addr + len > (addr & ~(booke_debug_info.data_bp_alignment - 1))
+ + booke_debug_info.data_bp_alignment))
+ return 0;
+ }
+ /* addr+len must fall in the 8 byte watchable region for DABR-based
+ processors (i.e., server processors). Without the new BookE ptrace
+ interface, DAC-based processors (i.e., embedded processors) will use
+ addresses aligned to 4-bytes due to the way the read/write flags are
+ passed in the old ptrace interface. */
+ else if (((ppc_linux_get_hwcap () & PPC_FEATURE_BOOKE)
+ && (addr + len) > (addr & ~3) + 4)
+ || (addr + len) > (addr & ~7) + 8)
+ return 0;
+
+ return 1;
+}
+
+/* This function compares two ppc_hw_breakpoint structs field-by-field. */
+static int
+booke_cmp_hw_point (struct ppc_hw_breakpoint *a, struct ppc_hw_breakpoint *b)
+{
+ return (a->trigger_type == b->trigger_type
+ && a->addr_mode == b->addr_mode
+ && a->condition_mode == b->condition_mode
+ && a->addr == b->addr
+ && a->addr2 == b->addr2
+ && a->condition_value == b->condition_value);
+}
+
+/* This function can be used to retrieve a thread_points by the TID of the
+ related process/thread. If nothing has been found, and ALLOC_NEW is 0,
+ it returns NULL. If ALLOC_NEW is non-zero, a new thread_points for the
+ provided TID will be created and returned. */
+static struct thread_points *
+booke_find_thread_points_by_tid (int tid, int alloc_new)
+{
+ int i;
+ struct thread_points *t;
+
+ for (i = 0; VEC_iterate (thread_points_p, ppc_threads, i, t); i++)
+ if (t->tid == tid)
+ return t;
+
+ t = NULL;
+
+ /* Do we need to allocate a new point_item
+ if the wanted one does not exist? */
+ if (alloc_new)
+ {
+ t = xmalloc (sizeof (struct thread_points));
+ t->hw_breaks = xzalloc (max_slots_number * sizeof (struct hw_break_tuple));
+ t->tid = tid;
+ VEC_safe_push (thread_points_p, ppc_threads, t);
+ }
+
+ return t;
+}
+
+/* This function is a generic wrapper that is responsible for inserting a
+ *point (i.e., calling `ptrace' in order to issue the request to the
+ kernel) and registering it internally in GDB. */
+static void
+booke_insert_point (struct ppc_hw_breakpoint *b, int tid)
+{
+ int i;
+ long slot;
+ struct ppc_hw_breakpoint *p = xmalloc (sizeof (struct ppc_hw_breakpoint));
+ struct hw_break_tuple *hw_breaks;
+ struct cleanup *c = make_cleanup (xfree, p);
+ struct thread_points *t;
+ struct hw_break_tuple *tuple;
+
+ memcpy (p, b, sizeof (struct ppc_hw_breakpoint));
+
+ errno = 0;
+ slot = ptrace (PPC_PTRACE_SETHWDEBUG, tid, 0, p);
+ if (slot < 0)
+ perror_with_name (_("Unexpected error setting breakpoint or watchpoint"));
+
+ /* Everything went fine, so we have to register this *point. */
+ t = booke_find_thread_points_by_tid (tid, 1);
+ gdb_assert (t != NULL);
+ hw_breaks = t->hw_breaks;
+
+ /* Find a free element in the hw_breaks vector. */
+ for (i = 0; i < max_slots_number; i++)
+ if (hw_breaks[i].hw_break == NULL)
+ {
+ hw_breaks[i].slot = slot;
+ hw_breaks[i].hw_break = p;
+ break;
+ }
+
+ gdb_assert (i != max_slots_number);
+
+ discard_cleanups (c);
+}
+
+/* This function is a generic wrapper that is responsible for removing a
+ *point (i.e., calling `ptrace' in order to issue the request to the
+ kernel), and unregistering it internally at GDB. */
+static void
+booke_remove_point (struct ppc_hw_breakpoint *b, int tid)
+{
+ int i;
+ struct hw_break_tuple *hw_breaks;
+ struct thread_points *t;
+
+ t = booke_find_thread_points_by_tid (tid, 0);
+ gdb_assert (t != NULL);
+ hw_breaks = t->hw_breaks;
+
+ for (i = 0; i < max_slots_number; i++)
+ if (hw_breaks[i].hw_break && booke_cmp_hw_point (hw_breaks[i].hw_break, b))
+ break;
+
+ gdb_assert (i != max_slots_number);
+
+ /* We have to ignore ENOENT errors because the kernel implements hardware
+ breakpoints/watchpoints as "one-shot", that is, they are automatically
+ deleted when hit. */
+ errno = 0;
+ if (ptrace (PPC_PTRACE_DELHWDEBUG, tid, 0, hw_breaks[i].slot) < 0)
+ if (errno != ENOENT)
+ perror_with_name (_("Unexpected error deleting breakpoint or watchpoint"));
+
+ xfree (hw_breaks[i].hw_break);
+ hw_breaks[i].hw_break = NULL;
+}
+
+static int
+ppc_linux_insert_hw_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
+{
+ ptid_t ptid;
+ struct lwp_info *lp;
+ struct ppc_hw_breakpoint p;
+
+ if (!have_ptrace_booke_interface ())
+ return -1;
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) bp_tgt->placed_address;
+ p.addr2 = 0;
+ p.condition_value = 0;
ALL_LWPS (lp, ptid)
- if (ptrace (PTRACE_SET_DEBUGREG, TIDGET (ptid), 0, saved_dabr_value) < 0)
- return -1;
+ booke_insert_point (&p, TIDGET (ptid));
return 0;
}
static int
-ppc_linux_remove_watchpoint (CORE_ADDR addr, int len, int rw)
+ppc_linux_remove_hw_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
- struct lwp_info *lp;
ptid_t ptid;
- long dabr_value = 0;
+ struct lwp_info *lp;
+ struct ppc_hw_breakpoint p;
+
+ if (!have_ptrace_booke_interface ())
+ return -1;
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) bp_tgt->placed_address;
+ p.addr2 = 0;
+ p.condition_value = 0;
- saved_dabr_value = 0;
ALL_LWPS (lp, ptid)
- if (ptrace (PTRACE_SET_DEBUGREG, TIDGET (ptid), 0, saved_dabr_value) < 0)
- return -1;
+ booke_remove_point (&p, TIDGET (ptid));
+
return 0;
}
+static int
+get_trigger_type (int rw)
+{
+ int t;
+
+ if (rw == hw_read)
+ t = PPC_BREAKPOINT_TRIGGER_READ;
+ else if (rw == hw_write)
+ t = PPC_BREAKPOINT_TRIGGER_WRITE;
+ else
+ t = PPC_BREAKPOINT_TRIGGER_READ | PPC_BREAKPOINT_TRIGGER_WRITE;
+
+ return t;
+}
+
+/* Check whether we have at least one free DVC register. */
+static int
+can_use_watchpoint_cond_accel (void)
+{
+ struct thread_points *p;
+ int tid = TIDGET (inferior_ptid);
+ int cnt = booke_debug_info.num_condition_regs, i;
+ CORE_ADDR tmp_value;
+
+ if (!have_ptrace_booke_interface () || cnt == 0)
+ return 0;
+
+ p = booke_find_thread_points_by_tid (tid, 0);
+
+ if (p)
+ {
+ for (i = 0; i < max_slots_number; i++)
+ if (p->hw_breaks[i].hw_break != NULL
+ && (p->hw_breaks[i].hw_break->condition_mode
+ != PPC_BREAKPOINT_CONDITION_NONE))
+ cnt--;
+
+ /* There are no available slots now. */
+ if (cnt <= 0)
+ return 0;
+ }
+
+ return 1;
+}
+
+/* Calculate the enable bits and the contents of the Data Value Compare
+ debug register present in BookE processors.
+
+ ADDR is the address to be watched, LEN is the length of watched data
+ and DATA_VALUE is the value which will trigger the watchpoint.
+ On exit, CONDITION_MODE will hold the enable bits for the DVC, and
+ CONDITION_VALUE will hold the value which should be put in the
+ DVC register. */
+static void
+calculate_dvc (CORE_ADDR addr, int len, CORE_ADDR data_value,
+ uint32_t *condition_mode, uint64_t *condition_value)
+{
+ int i, num_byte_enable, align_offset, num_bytes_off_dvc,
+ rightmost_enabled_byte;
+ CORE_ADDR addr_end_data, addr_end_dvc;
+
+ /* The DVC register compares bytes within fixed-length windows which
+ are word-aligned, with length equal to that of the DVC register.
+ We need to calculate where our watch region is relative to that
+ window and enable comparison of the bytes which fall within it. */
+
+ align_offset = addr % booke_debug_info.sizeof_condition;
+ addr_end_data = addr + len;
+ addr_end_dvc = (addr - align_offset
+ + booke_debug_info.sizeof_condition);
+ num_bytes_off_dvc = (addr_end_data > addr_end_dvc)?
+ addr_end_data - addr_end_dvc : 0;
+ num_byte_enable = len - num_bytes_off_dvc;
+ /* Here, bytes are numbered from right to left. */
+ rightmost_enabled_byte = (addr_end_data < addr_end_dvc)?
+ addr_end_dvc - addr_end_data : 0;
+
+ *condition_mode = PPC_BREAKPOINT_CONDITION_AND;
+ for (i = 0; i < num_byte_enable; i++)
+ *condition_mode |= PPC_BREAKPOINT_CONDITION_BE (i + rightmost_enabled_byte);
+
+ /* Now we need to match the position within the DVC of the comparison
+ value with where the watch region is relative to the window
+ (i.e., the ALIGN_OFFSET). */
+
+ *condition_value = ((uint64_t) data_value >> num_bytes_off_dvc * 8
+ << rightmost_enabled_byte * 8);
+}
+
+/* Return the number of memory locations that need to be accessed to
+ evaluate the expression which generated the given value chain.
+ Returns -1 if there's any register access involved, or if there are
+ other kinds of values which are not acceptable in a condition
+ expression (e.g., lval_computed or lval_internalvar). */
+static int
+num_memory_accesses (struct value *v)
+{
+ int found_memory_cnt = 0;
+ struct value *head = v;
+
+ /* The idea here is that evaluating an expression generates a series
+ of values, one holding the value of every subexpression. (The
+ expression a*b+c has five subexpressions: a, b, a*b, c, and
+ a*b+c.) GDB's values hold almost enough information to establish
+ the criteria given above --- they identify memory lvalues,
+ register lvalues, computed values, etcetera. So we can evaluate
+ the expression, and then scan the chain of values that leaves
+ behind to determine the memory locations involved in the evaluation
+ of an expression.
+
+ However, I don't think that the values returned by inferior
+ function calls are special in any way. So this function may not
+ notice that an expression contains an inferior function call.
+ FIXME. */
+
+ for (; v; v = value_next (v))
+ {
+ /* Constants and values from the history are fine. */
+ if (VALUE_LVAL (v) == not_lval || deprecated_value_modifiable (v) == 0)
+ continue;
+ else if (VALUE_LVAL (v) == lval_memory)
+ {
+ /* A lazy memory lvalue is one that GDB never needed to fetch;
+ we either just used its address (e.g., `a' in `a.b') or
+ we never needed it at all (e.g., `a' in `a,b'). */
+ if (!value_lazy (v))
+ found_memory_cnt++;
+ }
+ /* Other kinds of values are not fine. */
+ else
+ return -1;
+ }
+
+ return found_memory_cnt;
+}
+
+/* Verifies whether the expression COND can be implemented using the
+ DVC (Data Value Compare) register in BookE processors. The expression
+ must test the watch value for equality with a constant expression.
+ If the function returns 1, DATA_VALUE will contain the constant against
+ which the watch value should be compared. */
+static int
+check_condition (CORE_ADDR watch_addr, struct expression *cond,
+ CORE_ADDR *data_value)
+{
+ int pc = 1, num_accesses_left, num_accesses_right;
+ struct value *left_val, *right_val, *left_chain, *right_chain;
+
+ if (cond->elts[0].opcode != BINOP_EQUAL)
+ return 0;
+
+ fetch_subexp_value (cond, &pc, &left_val, NULL, &left_chain);
+ num_accesses_left = num_memory_accesses (left_chain);
+
+ if (left_val == NULL || num_accesses_left < 0)
+ {
+ free_value_chain (left_chain);
+
+ return 0;
+ }
+
+ fetch_subexp_value (cond, &pc, &right_val, NULL, &right_chain);
+ num_accesses_right = num_memory_accesses (right_chain);
+
+ if (right_val == NULL || num_accesses_right < 0)
+ {
+ free_value_chain (left_chain);
+ free_value_chain (right_chain);
+
+ return 0;
+ }
+
+ if (num_accesses_left == 1 && num_accesses_right == 0
+ && VALUE_LVAL (left_val) == lval_memory
+ && value_address (left_val) == watch_addr)
+ *data_value = value_as_long (right_val);
+ else if (num_accesses_left == 0 && num_accesses_right == 1
+ && VALUE_LVAL (right_val) == lval_memory
+ && value_address (right_val) == watch_addr)
+ *data_value = value_as_long (left_val);
+ else
+ {
+ free_value_chain (left_chain);
+ free_value_chain (right_chain);
+
+ return 0;
+ }
+
+ free_value_chain (left_chain);
+ free_value_chain (right_chain);
+
+ return 1;
+}
+
+/* Return non-zero if the target is capable of using hardware to evaluate
+ the condition expression, thus only triggering the watchpoint when it is
+ true. */
+static int
+ppc_linux_can_accel_watchpoint_condition (CORE_ADDR addr, int len, int rw,
+ struct expression *cond)
+{
+ CORE_ADDR data_value;
+
+ return (have_ptrace_booke_interface ()
+ && booke_debug_info.num_condition_regs > 0
+ && check_condition (addr, cond, &data_value));
+}
+
+static int
+ppc_linux_insert_watchpoint (CORE_ADDR addr, int len, int rw,
+ struct expression *cond)
+{
+ struct lwp_info *lp;
+ ptid_t ptid;
+ int ret = -1;
+
+ if (have_ptrace_booke_interface ())
+ {
+ struct ppc_hw_breakpoint p;
+ CORE_ADDR data_value;
+
+ if (cond && can_use_watchpoint_cond_accel ()
+ && check_condition (addr, cond, &data_value))
+ calculate_dvc (addr, len, data_value, &p.condition_mode,
+ &p.condition_value);
+ else
+ {
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.condition_value = 0;
+ }
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = get_trigger_type (rw);
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.addr = (uint64_t) addr;
+ p.addr2 = 0;
+
+ ALL_LWPS (lp, ptid)
+ booke_insert_point (&p, TIDGET (ptid));
+
+ ret = 0;
+ }
+ else
+ {
+ long dabr_value;
+ long read_mode, write_mode;
+
+ if (ppc_linux_get_hwcap () & PPC_FEATURE_BOOKE)
+ {
+ /* PowerPC 440 requires only the read/write flags to be passed
+ to the kernel. */
+ read_mode = 1;
+ write_mode = 2;
+ }
+ else
+ {
+ /* PowerPC 970 and other DABR-based processors are required to pass
+ the Breakpoint Translation bit together with the flags. */
+ read_mode = 5;
+ write_mode = 6;
+ }
+
+ dabr_value = addr & ~(read_mode | write_mode);
+ switch (rw)
+ {
+ case hw_read:
+ /* Set read and translate bits. */
+ dabr_value |= read_mode;
+ break;
+ case hw_write:
+ /* Set write and translate bits. */
+ dabr_value |= write_mode;
+ break;
+ case hw_access:
+ /* Set read, write and translate bits. */
+ dabr_value |= read_mode | write_mode;
+ break;
+ }
+
+ saved_dabr_value = dabr_value;
+
+ ALL_LWPS (lp, ptid)
+ if (ptrace (PTRACE_SET_DEBUGREG, TIDGET (ptid), 0,
+ saved_dabr_value) < 0)
+ return -1;
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static int
+ppc_linux_remove_watchpoint (CORE_ADDR addr, int len, int rw,
+ struct expression *cond)
+{
+ struct lwp_info *lp;
+ ptid_t ptid;
+ int ret = -1;
+
+ if (have_ptrace_booke_interface ())
+ {
+ struct ppc_hw_breakpoint p;
+ CORE_ADDR data_value;
+
+ if (cond && booke_debug_info.num_condition_regs > 0
+ && check_condition (addr, cond, &data_value))
+ calculate_dvc (addr, len, data_value, &p.condition_mode,
+ &p.condition_value);
+ else
+ {
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.condition_value = 0;
+ }
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = get_trigger_type (rw);
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.addr = (uint64_t) addr;
+ p.addr2 = 0;
+
+ ALL_LWPS (lp, ptid)
+ booke_remove_point (&p, TIDGET (ptid));
+
+ ret = 0;
+ }
+ else
+ {
+ saved_dabr_value = 0;
+ ALL_LWPS (lp, ptid)
+ if (ptrace (PTRACE_SET_DEBUGREG, TIDGET (ptid), 0,
+ saved_dabr_value) < 0)
+ return -1;
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
static void
ppc_linux_new_thread (ptid_t ptid)
{
- ptrace (PTRACE_SET_DEBUGREG, TIDGET (ptid), 0, saved_dabr_value);
+ int tid = TIDGET (ptid);
+
+ if (have_ptrace_booke_interface ())
+ {
+ int i;
+ struct thread_points *p;
+ struct hw_break_tuple *hw_breaks;
+
+ if (VEC_empty (thread_points_p, ppc_threads))
+ return;
+
+ /* Get a list of breakpoints from any thread. */
+ p = VEC_last (thread_points_p, ppc_threads);
+ hw_breaks = p->hw_breaks;
+
+ /* Copy that thread's breakpoints and watchpoints to the new thread. */
+ for (i = 0; i < max_slots_number; i++)
+ if (hw_breaks[i].hw_break)
+ booke_insert_point (hw_breaks[i].hw_break, tid);
+ }
+ else
+ ptrace (PTRACE_SET_DEBUGREG, tid, 0, saved_dabr_value);
+}
+
+static void
+ppc_linux_thread_exit (struct thread_info *tp, int silent)
+{
+ int i;
+ int tid = TIDGET (tp->ptid);
+ struct hw_break_tuple *hw_breaks;
+ struct thread_points *t = NULL, *p;
+
+ if (!have_ptrace_booke_interface ())
+ return;
+
+ for (i = 0; VEC_iterate (thread_points_p, ppc_threads, i, p); i++)
+ if (p->tid == tid)
+ {
+ t = p;
+ break;
+ }
+
+ if (t == NULL)
+ return;
+
+ VEC_unordered_remove (thread_points_p, ppc_threads, i);
+
+ hw_breaks = t->hw_breaks;
+
+ for (i = 0; i < max_slots_number; i++)
+ if (hw_breaks[i].hw_break)
+ xfree (hw_breaks[i].hw_break);
+
+ xfree (t->hw_breaks);
+ xfree (t);
}
static int
|| (siginfo_p->si_code & 0xffff) != 0x0004 /* TRAP_HWBKPT */)
return 0;
+ if (have_ptrace_booke_interface ())
+ {
+ int i;
+ struct thread_points *t;
+ struct hw_break_tuple *hw_breaks;
+ /* The index (or slot) of the *point is passed in the si_errno field. */
+ int slot = siginfo_p->si_errno;
+
+ t = booke_find_thread_points_by_tid (TIDGET (inferior_ptid), 0);
+
+ /* Find out if this *point is a hardware breakpoint.
+ If so, we should return 0. */
+ if (t)
+ {
+ hw_breaks = t->hw_breaks;
+ for (i = 0; i < max_slots_number; i++)
+ if (hw_breaks[i].hw_break && hw_breaks[i].slot == slot
+ && hw_breaks[i].hw_break->trigger_type
+ == PPC_BREAKPOINT_TRIGGER_EXECUTE)
+ return 0;
+ }
+ }
+
*addr_p = (CORE_ADDR) (uintptr_t) siginfo_p->si_addr;
return 1;
}
CORE_ADDR addr,
CORE_ADDR start, int length)
{
- addr &= ~7;
- /* Check whether [start, start+length-1] intersects [addr, addr+7]. */
- return start <= addr + 7 && start + length - 1 >= addr;
+ int mask;
+
+ if (have_ptrace_booke_interface ()
+ && ppc_linux_get_hwcap () & PPC_FEATURE_BOOKE)
+ return start <= addr && start + length >= addr;
+ else if (ppc_linux_get_hwcap () & PPC_FEATURE_BOOKE)
+ mask = 3;
+ else
+ mask = 7;
+
+ addr &= ~mask;
+
+ /* Check whether [start, start+length-1] intersects [addr, addr+mask]. */
+ return start <= addr + mask && start + length - 1 >= addr;
}
static void
-ppc_linux_store_inferior_registers (struct regcache *regcache, int regno)
+ppc_linux_store_inferior_registers (struct target_ops *ops,
+ struct regcache *regcache, int regno)
{
/* Overload thread id onto process id */
int tid = TIDGET (inferior_ptid);
fpregsetp, sizeof (*fpregsetp));
}
+static int
+ppc_linux_target_wordsize (void)
+{
+ int wordsize = 4;
+
+ /* Check for 64-bit inferior process. This is the case when the host is
+ 64-bit, and in addition the top bit of the MSR register is set. */
+#ifdef __powerpc64__
+ long msr;
+
+ int tid = TIDGET (inferior_ptid);
+ if (tid == 0)
+ tid = PIDGET (inferior_ptid);
+
+ errno = 0;
+ msr = (long) ptrace (PTRACE_PEEKUSER, tid, PT_MSR * 8, 0);
+ if (errno == 0 && msr < 0)
+ wordsize = 8;
+#endif
+
+ return wordsize;
+}
+
+static int
+ppc_linux_auxv_parse (struct target_ops *ops, gdb_byte **readptr,
+ gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp)
+{
+ int sizeof_auxv_field = ppc_linux_target_wordsize ();
+ enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch);
+ gdb_byte *ptr = *readptr;
+
+ if (endptr == ptr)
+ return 0;
+
+ if (endptr - ptr < sizeof_auxv_field * 2)
+ return -1;
+
+ *typep = extract_unsigned_integer (ptr, sizeof_auxv_field, byte_order);
+ ptr += sizeof_auxv_field;
+ *valp = extract_unsigned_integer (ptr, sizeof_auxv_field, byte_order);
+ ptr += sizeof_auxv_field;
+
+ *readptr = ptr;
+ return 1;
+}
+
static const struct target_desc *
ppc_linux_read_description (struct target_ops *ops)
{
int altivec = 0;
+ int vsx = 0;
+ int isa205 = 0;
+ int cell = 0;
int tid = TIDGET (inferior_ptid);
if (tid == 0)
perror_with_name (_("Unable to fetch SPE registers"));
}
+ if (have_ptrace_getsetvsxregs)
+ {
+ gdb_vsxregset_t vsxregset;
+
+ if (ptrace (PTRACE_GETVSXREGS, tid, 0, &vsxregset) >= 0)
+ vsx = 1;
+
+ /* EIO means that the PTRACE_GETVSXREGS request isn't supported.
+ Anything else needs to be reported. */
+ else if (errno != EIO)
+ perror_with_name (_("Unable to fetch VSX registers"));
+ }
+
if (have_ptrace_getvrregs)
{
gdb_vrregset_t vrregset;
perror_with_name (_("Unable to fetch AltiVec registers"));
}
- /* Check for 64-bit inferior process. This is the case when the host is
- 64-bit, and in addition the top bit of the MSR register is set. */
-#ifdef __powerpc64__
- {
- long msr;
- errno = 0;
- msr = (long) ptrace (PTRACE_PEEKUSER, tid, PT_MSR * 8, 0);
- if (errno == 0 && msr < 0)
- return altivec? tdesc_powerpc_altivec64l : tdesc_powerpc_64l;
- }
-#endif
+ /* Power ISA 2.05 (implemented by Power 6 and newer processors) increases
+ the FPSCR from 32 bits to 64 bits. Even though Power 7 supports this
+ ISA version, it doesn't have PPC_FEATURE_ARCH_2_05 set, only
+ PPC_FEATURE_ARCH_2_06. Since for now the only bits used in the higher
+ half of the register are for Decimal Floating Point, we check if that
+ feature is available to decide the size of the FPSCR. */
+ if (ppc_linux_get_hwcap () & PPC_FEATURE_HAS_DFP)
+ isa205 = 1;
+
+ if (ppc_linux_get_hwcap () & PPC_FEATURE_CELL)
+ cell = 1;
+
+ if (ppc_linux_target_wordsize () == 8)
+ {
+ if (cell)
+ return tdesc_powerpc_cell64l;
+ else if (vsx)
+ return isa205? tdesc_powerpc_isa205_vsx64l : tdesc_powerpc_vsx64l;
+ else if (altivec)
+ return isa205? tdesc_powerpc_isa205_altivec64l : tdesc_powerpc_altivec64l;
+
+ return isa205? tdesc_powerpc_isa205_64l : tdesc_powerpc_64l;
+ }
- return altivec? tdesc_powerpc_altivec32l : tdesc_powerpc_32l;
+ if (cell)
+ return tdesc_powerpc_cell32l;
+ else if (vsx)
+ return isa205? tdesc_powerpc_isa205_vsx32l : tdesc_powerpc_vsx32l;
+ else if (altivec)
+ return isa205? tdesc_powerpc_isa205_altivec32l : tdesc_powerpc_altivec32l;
+
+ return isa205? tdesc_powerpc_isa205_32l : tdesc_powerpc_32l;
}
void _initialize_ppc_linux_nat (void);
t->to_fetch_registers = ppc_linux_fetch_inferior_registers;
t->to_store_registers = ppc_linux_store_inferior_registers;
- /* Add our watchpoint methods. */
- t->to_can_use_hw_breakpoint = ppc_linux_check_watch_resources;
+ /* Add our breakpoint/watchpoint methods. */
+ t->to_can_use_hw_breakpoint = ppc_linux_can_use_hw_breakpoint;
+ t->to_insert_hw_breakpoint = ppc_linux_insert_hw_breakpoint;
+ t->to_remove_hw_breakpoint = ppc_linux_remove_hw_breakpoint;
t->to_region_ok_for_hw_watchpoint = ppc_linux_region_ok_for_hw_watchpoint;
t->to_insert_watchpoint = ppc_linux_insert_watchpoint;
t->to_remove_watchpoint = ppc_linux_remove_watchpoint;
t->to_stopped_by_watchpoint = ppc_linux_stopped_by_watchpoint;
t->to_stopped_data_address = ppc_linux_stopped_data_address;
t->to_watchpoint_addr_within_range = ppc_linux_watchpoint_addr_within_range;
+ t->to_can_accel_watchpoint_condition = ppc_linux_can_accel_watchpoint_condition;
t->to_read_description = ppc_linux_read_description;
+ t->to_auxv_parse = ppc_linux_auxv_parse;
+
+ observer_attach_thread_exit (ppc_linux_thread_exit);
/* Register the target. */
linux_nat_add_target (t);