/* Machine independent support for SVR4 /proc (process file system) for GDB.
- Copyright 1991, 1992-98, 1999 Free Software Foundation, Inc.
- Written by Fred Fish at Cygnus Support. Changes for sysv4.2mp procfs
- compatibility by Geoffrey Noer at Cygnus Solutions.
+ Copyright 1999 Free Software Foundation, Inc.
+ Written by Michael Snyder at Cygnus Solutions.
+ Based on work by Fred Fish, Stu Grossman, Geoff Noer, and others.
This file is part of GDB.
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+along with this program; if not, write to the Free Software Foundation,
+Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+#include "defs.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "gdbthread.h"
-/* N O T E S
-
-For information on the details of using /proc consult section proc(4)
-in the UNIX System V Release 4 System Administrator's Reference Manual.
-
-The general register and floating point register sets are manipulated
-separately. This file makes the assumption that if FP0_REGNUM is
-defined, then support for the floating point register set is desired,
-regardless of whether or not the actual target has floating point hardware.
+#if defined (NEW_PROC_API)
+#define _STRUCTURED_PROC 1 /* Should be done by configure script. */
+#endif
+#include <sys/procfs.h>
+#include <sys/fault.h>
+#include <sys/syscall.h>
+#include <sys/errno.h>
+#include <sys/wait.h>
+#include <signal.h>
+#include <ctype.h>
+
+#include "proc-utils.h"
+
+/*
+ * PROCFS.C
+ *
+ * This module provides the interface between GDB and the
+ * /proc file system, which is used on many versions of Unix
+ * as a means for debuggers to control other processes.
+ * Examples of the systems that use this interface are:
+ * Irix
+ * Solaris
+ * OSF
+ * Unixware
+ *
+ * /proc works by immitating a file system: you open a simulated file
+ * that represents the process you wish to interact with, and
+ * perform operations on that "file" in order to examine or change
+ * the state of the other process.
+ *
+ * The most important thing to know about /proc and this module
+ * is that there are two very different interfaces to /proc:
+ * One that uses the ioctl system call, and
+ * another that uses read and write system calls.
+ * This module has to support both /proc interfaces. This means
+ * that there are two different ways of doing every basic operation.
+ *
+ * In order to keep most of the code simple and clean, I have
+ * defined an interface "layer" which hides all these system calls.
+ * An ifdef (NEW_PROC_API) determines which interface we are using,
+ * and most or all occurrances of this ifdef should be confined to
+ * this interface layer.
*/
-#include "defs.h"
+/* Determine which /proc API we are using:
+ The ioctl API defines PIOCSTATUS, while
+ the read/write (multiple fd) API never does. */
+#ifdef NEW_PROC_API
#include <sys/types.h>
-#include <time.h>
-#include <sys/fault.h>
-#include <sys/syscall.h>
-#include <sys/procfs.h>
-#include <fcntl.h>
-#include <errno.h>
-#include "gdb_string.h"
-#include <stropts.h>
-#include <poll.h>
-#include <unistd.h>
-#include "gdb_stat.h"
+#include <dirent.h> /* opendir/readdir, for listing the LWP's */
+#endif
-#include "inferior.h"
-#include "target.h"
-#include "command.h"
-#include "gdbcore.h"
-#include "gdbthread.h"
+#include <fcntl.h> /* for O_RDONLY */
+#include <unistd.h> /* for "X_OK" */
+#include "gdb_stat.h" /* for struct stat */
-#if !defined(SYS_lwp_create) && defined(SYS_lwpcreate)
-# define SYS_lwp_create SYS_lwpcreate
-#endif
+/* =================== TARGET_OPS "MODULE" =================== */
-#if !defined(SYS_lwp_exit) && defined(SYS_lwpexit)
-# define SYS_lwp_exit SYS_lwpexit
-#endif
+/*
+ * This module defines the GDB target vector and its methods.
+ */
-#if !defined(SYS_lwp_wait) && defined(SYS_lwpwait)
-# define SYS_lwp_wait SYS_lwpwait
-#endif
+static void procfs_open PARAMS((char *, int));
+static void procfs_attach PARAMS ((char *, int));
+static void procfs_detach PARAMS ((char *, int));
+static void procfs_resume PARAMS ((int, int, enum target_signal));
+static int procfs_can_run PARAMS ((void));
+static void procfs_stop PARAMS ((void));
+static void procfs_files_info PARAMS ((struct target_ops *));
+static void procfs_fetch_registers PARAMS ((int));
+static void procfs_store_registers PARAMS ((int));
+static void procfs_notice_signals PARAMS ((int));
+static void procfs_prepare_to_store PARAMS ((void));
+static void procfs_kill_inferior PARAMS ((void));
+static void procfs_mourn_inferior PARAMS ((void));
+static void procfs_create_inferior PARAMS ((char *, char *, char **));
+static int procfs_wait PARAMS ((int,
+ struct target_waitstatus *));
+static int procfs_xfer_memory PARAMS ((CORE_ADDR,
+ char *, int, int,
+ struct target_ops *));
+
+static int procfs_thread_alive PARAMS ((int));
+
+void procfs_find_new_threads PARAMS ((void));
+char *procfs_pid_to_str PARAMS ((int));
+
+struct target_ops procfs_ops; /* the target vector */
-#if !defined(SYS_lwp_self) && defined(SYS_lwpself)
-# define SYS_lwp_self SYS_lwpself
-#endif
+static void
+init_procfs_ops ()
+{
+ procfs_ops.to_shortname = "procfs";
+ procfs_ops.to_longname = "Unix /proc child process";
+ procfs_ops.to_doc =
+ "Unix /proc child process (started by the \"run\" command).";
+ procfs_ops.to_open = procfs_open;
+ procfs_ops.to_can_run = procfs_can_run;
+ procfs_ops.to_create_inferior = procfs_create_inferior;
+ procfs_ops.to_kill = procfs_kill_inferior;
+ procfs_ops.to_mourn_inferior = procfs_mourn_inferior;
+ procfs_ops.to_attach = procfs_attach;
+ procfs_ops.to_detach = procfs_detach;
+ procfs_ops.to_wait = procfs_wait;
+ procfs_ops.to_resume = procfs_resume;
+ procfs_ops.to_prepare_to_store = procfs_prepare_to_store;
+ procfs_ops.to_fetch_registers = procfs_fetch_registers;
+ procfs_ops.to_store_registers = procfs_store_registers;
+ procfs_ops.to_xfer_memory = procfs_xfer_memory;
+ procfs_ops.to_insert_breakpoint = memory_insert_breakpoint;
+ procfs_ops.to_remove_breakpoint = memory_remove_breakpoint;
+ procfs_ops.to_notice_signals = procfs_notice_signals;
+ procfs_ops.to_files_info = procfs_files_info;
+ procfs_ops.to_stop = procfs_stop;
+
+ procfs_ops.to_terminal_init = terminal_init_inferior;
+ procfs_ops.to_terminal_inferior = terminal_inferior;
+ procfs_ops.to_terminal_ours_for_output = terminal_ours_for_output;
+ procfs_ops.to_terminal_ours = terminal_ours;
+ procfs_ops.to_terminal_info = child_terminal_info;
+
+ procfs_ops.to_find_new_threads = procfs_find_new_threads;
+ procfs_ops.to_thread_alive = procfs_thread_alive;
+ procfs_ops.to_pid_to_str = procfs_pid_to_str;
+
+ procfs_ops.to_has_execution = 1;
+ procfs_ops.to_has_stack = 1;
+ procfs_ops.to_has_registers = 1;
+ procfs_ops.to_stratum = process_stratum;
+ procfs_ops.to_has_thread_control = tc_schedlock;
+ procfs_ops.to_magic = OPS_MAGIC;
+}
-#if !defined(SYS_lwp_info) && defined(SYS_lwpinfo)
-# define SYS_lwp_info SYS_lwpinfo
-#endif
+/* =================== END, TARGET_OPS "MODULE" =================== */
-#if !defined(SYS_lwp_private) && defined(SYS_lwpprivate)
-# define SYS_lwp_private SYS_lwpprivate
-#endif
+/*
+ * Temporary debugging code:
+ *
+ * These macros allow me to trace the system calls that we make
+ * to control the child process. This is quite handy for comparing
+ * with the older version of procfs.
+ */
-#if !defined(SYS_lwp_kill) && defined(SYS_lwpkill)
-# define SYS_lwp_kill SYS_lwpkill
+#ifdef TRACE_PROCFS
+#ifdef NEW_PROC_API
+extern int write_with_trace PARAMS ((int, void *, size_t, char *, int));
+extern off_t lseek_with_trace PARAMS ((int, off_t, int, char *, int));
+#define write(X,Y,Z) write_with_trace (X, Y, Z, __FILE__, __LINE__)
+#define lseek(X,Y,Z) lseek_with_trace (X, Y, Z, __FILE__, __LINE__)
+#else
+extern int ioctl_with_trace PARAMS ((int, long, void *, char *, int));
+#define ioctl(X,Y,Z) ioctl_with_trace (X, Y, Z, __FILE__, __LINE__)
+#endif
+#define open(X,Y) open_with_trace (X, Y, __FILE__, __LINE__)
+#define close(X) close_with_trace (X, __FILE__, __LINE__)
+#define wait(X) wait_with_trace (X, __FILE__, __LINE__)
+#define PROCFS_NOTE(X) procfs_note (X, __FILE__, __LINE__)
+#define PROC_PRETTYFPRINT_STATUS(X,Y,Z,T) \
+proc_prettyfprint_status (X, Y, Z, T)
+#else
+#define PROCFS_NOTE(X)
+#define PROC_PRETTYFPRINT_STATUS(X,Y,Z,T)
#endif
-#if !defined(SYS_lwp_suspend) && defined(SYS_lwpsuspend)
-# define SYS_lwp_suspend SYS_lwpsuspend
-#endif
-#if !defined(SYS_lwp_continue) && defined(SYS_lwpcontinue)
-# define SYS_lwp_continue SYS_lwpcontinue
-#endif
+/*
+ * World Unification:
+ *
+ * Put any typedefs, defines etc. here that are required for
+ * the unification of code that handles different versions of /proc.
+ */
-/* the name of the proc status struct depends on the implementation */
-/* Wrap Light Weight Process member in THE_PR_LWP macro for clearer code */
-#ifndef HAVE_PSTATUS_T
- typedef prstatus_t gdb_prstatus_t;
-#define THE_PR_LWP(a) a
-#else /* HAVE_PSTATUS_T */
- typedef pstatus_t gdb_prstatus_t;
-#define THE_PR_LWP(a) a.pr_lwp
-#if !defined(HAVE_PRRUN_T) && defined(HAVE_MULTIPLE_PROC_FDS)
- /* Fallback definitions - for using configure information directly */
+#ifdef NEW_PROC_API /* Solaris 7 && 8 method for watchpoints */
#ifndef UNIXWARE
-#define UNIXWARE 1
+ enum { READ_WATCHFLAG = WA_READ,
+ WRITE_WATCHFLAG = WA_WRITE,
+ EXEC_WATCHFLAG = WA_EXEC,
+ AFTER_WATCHFLAG = WA_TRAPAFTER
+ };
#endif
-#if !defined(PROCFS_USE_READ_WRITE) && !defined(HAVE_PROCFS_PIOCSET)
-#define PROCFS_USE_READ_WRITE 1
+#else /* Irix method for watchpoints */
+ enum { READ_WATCHFLAG = MA_READ,
+ WRITE_WATCHFLAG = MA_WRITE,
+ EXEC_WATCHFLAG = MA_EXEC,
+ AFTER_WATCHFLAG = 0 /* trapafter not implemented */
+ };
#endif
-#endif /* !HAVE_PRRUN_T && HAVE_MULTIPLE_PROC_FDS */
-#endif /* HAVE_PSTATUS_T */
-#define MAX_SYSCALLS 256 /* Maximum number of syscalls for table */
-/* proc name formats may vary depending on the proc implementation */
-#ifdef HAVE_MULTIPLE_PROC_FDS
-# ifndef CTL_PROC_NAME_FMT
-# define CTL_PROC_NAME_FMT "/proc/%d/ctl"
-# define AS_PROC_NAME_FMT "/proc/%d/as"
-# define MAP_PROC_NAME_FMT "/proc/%d/map"
+
+
+/* =================== STRUCT PROCINFO "MODULE" =================== */
+
+ /* FIXME: this comment will soon be out of date W.R.T. threads. */
+
+/* The procinfo struct is a wrapper to hold all the state information
+ concerning a /proc process. There should be exactly one procinfo
+ for each process, and since GDB currently can debug only one
+ process at a time, that means there should be only one procinfo.
+ All of the LWP's of a process can be accessed indirectly thru the
+ single process procinfo.
+
+ However, against the day when GDB may debug more than one process,
+ this data structure is kept in a list (which for now will hold no
+ more than one member), and many functions will have a pointer to a
+ procinfo as an argument.
+
+ There will be a separate procinfo structure for use by the (not yet
+ implemented) "info proc" command, so that we can print useful
+ information about any random process without interfering with the
+ inferior's procinfo information. */
+
+#ifdef NEW_PROC_API
+/* format strings for /proc paths */
+# ifndef CTL_PROC_NAME_FMT
+# define MAIN_PROC_NAME_FMT "/proc/%d"
+# define CTL_PROC_NAME_FMT "/proc/%d/ctl"
+# define AS_PROC_NAME_FMT "/proc/%d/as"
+# define MAP_PROC_NAME_FMT "/proc/%d/map"
# define STATUS_PROC_NAME_FMT "/proc/%d/status"
-# endif
-#else /* HAVE_MULTIPLE_PROC_FDS */
-# ifndef CTL_PROC_NAME_FMT
-# define CTL_PROC_NAME_FMT "/proc/%05d"
-# define AS_PROC_NAME_FMT "/proc/%05d"
-# define MAP_PROC_NAME_FMT "/proc/%05d"
+# define MAX_PROC_NAME_SIZE sizeof("/proc/99999/lwp/8096/lstatus")
+# endif
+/* the name of the proc status struct depends on the implementation */
+typedef pstatus_t gdb_prstatus_t;
+typedef lwpstatus_t gdb_lwpstatus_t;
+#else /* ! NEW_PROC_API */
+/* format strings for /proc paths */
+# ifndef CTL_PROC_NAME_FMT
+# define MAIN_PROC_NAME_FMT "/proc/%05d"
+# define CTL_PROC_NAME_FMT "/proc/%05d"
+# define AS_PROC_NAME_FMT "/proc/%05d"
+# define MAP_PROC_NAME_FMT "/proc/%05d"
# define STATUS_PROC_NAME_FMT "/proc/%05d"
-# endif
-#endif /* HAVE_MULTIPLE_PROC_FDS */
+# define MAX_PROC_NAME_SIZE sizeof("/proc/ttttppppp")
+# endif
+/* the name of the proc status struct depends on the implementation */
+typedef prstatus_t gdb_prstatus_t;
+typedef prstatus_t gdb_lwpstatus_t;
+#endif /* NEW_PROC_API */
/* These #ifdefs are for sol2.x in particular. sol2.x has
typedef fpregset_t gdb_fpregset_t;
#endif
+/* Provide default composite pid manipulation macros for systems that
+ don't have threads. */
-#define MAX_PROC_NAME_SIZE sizeof("/proc/1234567890/status")
-
-struct target_ops procfs_ops;
-
-int procfs_suppress_run = 0; /* Non-zero if procfs should pretend not to
- be a runnable target. Used by targets
- that can sit atop procfs, such as solaris
- thread support. */
-
-#if 1 /* FIXME: Gross and ugly hack to resolve coredep.c global */
-CORE_ADDR kernel_u_addr;
+#ifndef PIDGET
+#define PIDGET(PID) (PID)
+#define TIDGET(PID) (PID)
+#define MERGEPID(PID, TID) (PID)
#endif
-#ifdef BROKEN_SIGINFO_H /* Workaround broken SGS <sys/siginfo.h> */
-#undef si_pid
-#define si_pid _data._proc.pid
-#undef si_uid
-#define si_uid _data._proc._pdata._kill.uid
-#endif /* BROKEN_SIGINFO_H */
-
-/* Define structures for passing commands to /proc/pid/ctl file. Note that
- while we create these for the PROCFS_USE_READ_WRITE world, we use them
- and ignore the extra cmd int in other proc schemes.
-*/
-/* generic ctl msg */
-struct proc_ctl {
- int cmd;
- long data;
-};
-
-/* set general registers */
-struct greg_ctl {
- int cmd;
- gdb_gregset_t gregset;
-};
-
-/* set fp registers */
-struct fpreg_ctl {
- int cmd;
- gdb_fpregset_t fpregset;
-};
-
-/* set signals to be traced */
-struct sig_ctl {
- int cmd;
- sigset_t sigset;
-};
-
-/* set faults to be traced */
-struct flt_ctl {
- int cmd;
- fltset_t fltset;
-};
-
-/* set system calls to be traced */
-struct sys_ctl {
- int cmd;
- sysset_t sysset;
-};
-
-/* set current signal to be traced */
-struct sigi_ctl {
- int cmd;
- siginfo_t siginfo;
-};
-
-/* All access to the inferior, either one started by gdb or one that has
- been attached to, is controlled by an instance of a procinfo structure,
- defined below. Since gdb currently only handles one inferior at a time,
- the procinfo structure for the inferior is statically allocated and
- only one exists at any given time. There is a separate procinfo
- structure for use by the "info proc" command, so that we can print
- useful information about any random process without interfering with
- the inferior's procinfo information. */
-
-struct procinfo {
+typedef struct procinfo {
struct procinfo *next;
- int pid; /* Process ID of inferior */
- int ctl_fd; /* File descriptor for /proc ctl file */
+ int pid; /* Process ID */
+ int tid; /* Thread/LWP id */
+
+ /* process state */
+ int was_stopped;
+ int ignore_next_sigstop;
+
+ /* The following four fd fields may be identical, or may contain
+ several different fd's, depending on the version of /proc
+ (old ioctl or new read/write). */
+
+ int ctl_fd; /* File descriptor for /proc control file */
+ /*
+ * The next three file descriptors are actually only needed in the
+ * read/write, multiple-file-descriptor implemenation (NEW_PROC_API).
+ * However, to avoid a bunch of #ifdefs in the code, we will use
+ * them uniformly by (in the case of the ioctl single-file-descriptor
+ * implementation) filling them with copies of the control fd.
+ */
int status_fd; /* File descriptor for /proc status file */
int as_fd; /* File descriptor for /proc as file */
- int map_fd; /* File descriptor for /proc map file */
- char *pathname; /* Pathname to /proc entry */
- int had_event; /* poll/select says something happened */
- int was_stopped; /* Nonzero if was stopped prior to attach */
- int nopass_next_sigstop; /* Don't pass a sigstop on next resume */
-#ifdef HAVE_PRRUN_T
- prrun_t prrun; /* Control state when it is run */
-#endif
- gdb_prstatus_t prstatus; /* Current process status info */
- struct greg_ctl gregset; /* General register set */
- struct fpreg_ctl fpregset; /* Floating point register set */
- struct flt_ctl fltset; /* Current traced hardware fault set */
- struct sig_ctl trace; /* Current traced signal set */
- struct sys_ctl exitset; /* Current traced system call exit set */
- struct sys_ctl entryset; /* Current traced system call entry set */
- struct sig_ctl saved_sighold; /* Saved held signal set */
- struct flt_ctl saved_fltset; /* Saved traced hardware fault set */
- struct sig_ctl saved_trace; /* Saved traced signal set */
- struct sys_ctl saved_exitset; /* Saved traced system call exit set */
- struct sys_ctl saved_entryset;/* Saved traced system call entry set */
- int num_syscall_handlers; /* Number of syscall trap handlers
- currently installed */
- /* Pointer to list of syscall trap handlers */
- struct procfs_syscall_handler *syscall_handlers;
- int saved_rtnval; /* return value and status for wait(), */
- int saved_statval; /* as supplied by a syscall handler. */
- int new_child; /* Non-zero if it's a new thread */
-};
-
-/* List of inferior process information */
-static struct procinfo *procinfo_list = NULL;
-static struct pollfd *poll_list; /* pollfds used for waiting on /proc */
-
-static int num_poll_list = 0; /* Number of entries in poll_list */
-
-/* Much of the information used in the /proc interface, particularly for
- printing status information, is kept as tables of structures of the
- following form. These tables can be used to map numeric values to
- their symbolic names and to a string that describes their specific use. */
-
-struct trans {
- int value; /* The numeric value */
- char *name; /* The equivalent symbolic value */
- char *desc; /* Short description of value */
-};
-
-/* Translate bits in the pr_flags member of the prstatus structure, into the
- names and desc information. */
-
-static struct trans pr_flag_table[] =
-{
-#if defined (PR_STOPPED)
- { PR_STOPPED, "PR_STOPPED", "Process is stopped" },
-#endif
-#if defined (PR_ISTOP)
- { PR_ISTOP, "PR_ISTOP", "Stopped on an event of interest" },
-#endif
-#if defined (PR_DSTOP)
- { PR_DSTOP, "PR_DSTOP", "A stop directive is in effect" },
-#endif
-#if defined (PR_ASLEEP)
- { PR_ASLEEP, "PR_ASLEEP", "Sleeping in an interruptible system call" },
-#endif
-#if defined (PR_FORK)
- { PR_FORK, "PR_FORK", "Inherit-on-fork is in effect" },
-#endif
-#if defined (PR_RLC)
- { PR_RLC, "PR_RLC", "Run-on-last-close is in effect" },
-#endif
-#if defined (PR_PTRACE)
- { PR_PTRACE, "PR_PTRACE", "Process is being controlled by ptrace" },
-#endif
-#if defined (PR_PCINVAL)
- { PR_PCINVAL, "PR_PCINVAL", "PC refers to an invalid virtual address" },
-#endif
-#if defined (PR_ISSYS)
- { PR_ISSYS, "PR_ISSYS", "Is a system process" },
-#endif
-#if defined (PR_STEP)
- { PR_STEP, "PR_STEP", "Process has single step pending" },
-#endif
-#if defined (PR_KLC)
- { PR_KLC, "PR_KLC", "Kill-on-last-close is in effect" },
-#endif
-#if defined (PR_ASYNC)
- { PR_ASYNC, "PR_ASYNC", "Asynchronous stop is in effect" },
-#endif
-#if defined (PR_PCOMPAT)
- { PR_PCOMPAT, "PR_PCOMPAT", "Ptrace compatibility mode in effect" },
-#endif
-#if defined (PR_MSACCT)
- { PR_MSACCT, "PR_MSACCT", "Microstate accounting enabled" },
-#endif
-#if defined (PR_BPTADJ)
- { PR_BPTADJ, "PR_BPTADJ", "Breakpoint PC adjustment in effect" },
-#endif
-#if defined (PR_ASLWP)
- { PR_ASLWP, "PR_ASLWP", "Asynchronus signal LWP" },
-#endif
- { 0, NULL, NULL }
-};
-/* Translate values in the pr_why field of the prstatus struct. */
+ char pathname[MAX_PROC_NAME_SIZE]; /* Pathname to /proc entry */
-static struct trans pr_why_table[] =
-{
-#if defined (PR_REQUESTED)
- { PR_REQUESTED, "PR_REQUESTED", "Directed to stop via PIOCSTOP/PIOCWSTOP" },
-#endif
-#if defined (PR_SIGNALLED)
- { PR_SIGNALLED, "PR_SIGNALLED", "Receipt of a traced signal" },
-#endif
-#if defined (PR_SYSENTRY)
- { PR_SYSENTRY, "PR_SYSENTRY", "Entry to a traced system call" },
-#endif
-#if defined (PR_SYSEXIT)
- { PR_SYSEXIT, "PR_SYSEXIT", "Exit from a traced system call" },
-#endif
-#if defined (PR_JOBCONTROL)
- { PR_JOBCONTROL, "PR_JOBCONTROL", "Default job control stop signal action" },
-#endif
-#if defined (PR_FAULTED)
- { PR_FAULTED, "PR_FAULTED", "Incurred a traced hardware fault" },
-#endif
-#if defined (PR_SUSPENDED)
- { PR_SUSPENDED, "PR_SUSPENDED", "Process suspended" },
-#endif
-#if defined (PR_CHECKPOINT)
- { PR_CHECKPOINT, "PR_CHECKPOINT", "(???)" },
-#endif
- { 0, NULL, NULL }
-};
+ fltset_t saved_fltset; /* Saved traced hardware fault set */
+ sigset_t saved_sigset; /* Saved traced signal set */
+ sigset_t saved_sighold; /* Saved held signal set */
+ sysset_t saved_exitset; /* Saved traced system call exit set */
+ sysset_t saved_entryset; /* Saved traced system call entry set */
-/* Hardware fault translation table. */
+ gdb_prstatus_t prstatus; /* Current process status info */
-static struct trans faults_table[] =
-{
-#if defined (FLTILL)
- { FLTILL, "FLTILL", "Illegal instruction" },
-#endif
-#if defined (FLTPRIV)
- { FLTPRIV, "FLTPRIV", "Privileged instruction" },
-#endif
-#if defined (FLTBPT)
- { FLTBPT, "FLTBPT", "Breakpoint trap" },
-#endif
-#if defined (FLTTRACE)
- { FLTTRACE, "FLTTRACE", "Trace trap" },
-#endif
-#if defined (FLTACCESS)
- { FLTACCESS, "FLTACCESS", "Memory access fault" },
-#endif
-#if defined (FLTBOUNDS)
- { FLTBOUNDS, "FLTBOUNDS", "Memory bounds violation" },
-#endif
-#if defined (FLTIOVF)
- { FLTIOVF, "FLTIOVF", "Integer overflow" },
-#endif
-#if defined (FLTIZDIV)
- { FLTIZDIV, "FLTIZDIV", "Integer zero divide" },
-#endif
-#if defined (FLTFPE)
- { FLTFPE, "FLTFPE", "Floating-point exception" },
+#ifndef NEW_PROC_API
+ gdb_fpregset_t fpregset; /* Current floating point registers */
#endif
-#if defined (FLTSTACK)
- { FLTSTACK, "FLTSTACK", "Unrecoverable stack fault" },
-#endif
-#if defined (FLTPAGE)
- { FLTPAGE, "FLTPAGE", "Recoverable page fault" },
-#endif
- { 0, NULL, NULL }
-};
-
-/* Translation table for signal generation information. See UNIX System
- V Release 4 Programmer's Reference Manual, siginfo(5). */
+
+ struct procinfo *thread_list;
-static struct sigcode {
- int signo;
- int code;
- char *codename;
- char *desc;
-} siginfo_table[] = {
-#if defined (SIGILL) && defined (ILL_ILLOPC)
- { SIGILL, ILL_ILLOPC, "ILL_ILLOPC", "Illegal opcode" },
-#endif
-#if defined (SIGILL) && defined (ILL_ILLOPN)
- { SIGILL, ILL_ILLOPN, "ILL_ILLOPN", "Illegal operand", },
-#endif
-#if defined (SIGILL) && defined (ILL_ILLADR)
- { SIGILL, ILL_ILLADR, "ILL_ILLADR", "Illegal addressing mode" },
-#endif
-#if defined (SIGILL) && defined (ILL_ILLTRP)
- { SIGILL, ILL_ILLTRP, "ILL_ILLTRP", "Illegal trap" },
-#endif
-#if defined (SIGILL) && defined (ILL_PRVOPC)
- { SIGILL, ILL_PRVOPC, "ILL_PRVOPC", "Privileged opcode" },
-#endif
-#if defined (SIGILL) && defined (ILL_PRVREG)
- { SIGILL, ILL_PRVREG, "ILL_PRVREG", "Privileged register" },
-#endif
-#if defined (SIGILL) && defined (ILL_COPROC)
- { SIGILL, ILL_COPROC, "ILL_COPROC", "Coprocessor error" },
-#endif
-#if defined (SIGILL) && defined (ILL_BADSTK)
- { SIGILL, ILL_BADSTK, "ILL_BADSTK", "Internal stack error" },
-#endif
-#if defined (SIGFPE) && defined (FPE_INTDIV)
- { SIGFPE, FPE_INTDIV, "FPE_INTDIV", "Integer divide by zero" },
-#endif
-#if defined (SIGFPE) && defined (FPE_INTOVF)
- { SIGFPE, FPE_INTOVF, "FPE_INTOVF", "Integer overflow" },
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTDIV)
- { SIGFPE, FPE_FLTDIV, "FPE_FLTDIV", "Floating point divide by zero" },
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTOVF)
- { SIGFPE, FPE_FLTOVF, "FPE_FLTOVF", "Floating point overflow" },
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTUND)
- { SIGFPE, FPE_FLTUND, "FPE_FLTUND", "Floating point underflow" },
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTRES)
- { SIGFPE, FPE_FLTRES, "FPE_FLTRES", "Floating point inexact result" },
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTINV)
- { SIGFPE, FPE_FLTINV, "FPE_FLTINV", "Invalid floating point operation" },
-#endif
-#if defined (SIGFPE) && defined (FPE_FLTSUB)
- { SIGFPE, FPE_FLTSUB, "FPE_FLTSUB", "Subscript out of range" },
-#endif
-#if defined (SIGSEGV) && defined (SEGV_MAPERR)
- { SIGSEGV, SEGV_MAPERR, "SEGV_MAPERR", "Address not mapped to object" },
-#endif
-#if defined (SIGSEGV) && defined (SEGV_ACCERR)
- { SIGSEGV, SEGV_ACCERR, "SEGV_ACCERR", "Invalid permissions for object" },
-#endif
-#if defined (SIGBUS) && defined (BUS_ADRALN)
- { SIGBUS, BUS_ADRALN, "BUS_ADRALN", "Invalid address alignment" },
-#endif
-#if defined (SIGBUS) && defined (BUS_ADRERR)
- { SIGBUS, BUS_ADRERR, "BUS_ADRERR", "Non-existent physical address" },
-#endif
-#if defined (SIGBUS) && defined (BUS_OBJERR)
- { SIGBUS, BUS_OBJERR, "BUS_OBJERR", "Object specific hardware error" },
-#endif
-#if defined (SIGTRAP) && defined (TRAP_BRKPT)
- { SIGTRAP, TRAP_BRKPT, "TRAP_BRKPT", "Process breakpoint" },
-#endif
-#if defined (SIGTRAP) && defined (TRAP_TRACE)
- { SIGTRAP, TRAP_TRACE, "TRAP_TRACE", "Process trace trap" },
-#endif
-#if defined (SIGCLD) && defined (CLD_EXITED)
- { SIGCLD, CLD_EXITED, "CLD_EXITED", "Child has exited" },
-#endif
-#if defined (SIGCLD) && defined (CLD_KILLED)
- { SIGCLD, CLD_KILLED, "CLD_KILLED", "Child was killed" },
-#endif
-#if defined (SIGCLD) && defined (CLD_DUMPED)
- { SIGCLD, CLD_DUMPED, "CLD_DUMPED", "Child has terminated abnormally" },
-#endif
-#if defined (SIGCLD) && defined (CLD_TRAPPED)
- { SIGCLD, CLD_TRAPPED, "CLD_TRAPPED", "Traced child has trapped" },
-#endif
-#if defined (SIGCLD) && defined (CLD_STOPPED)
- { SIGCLD, CLD_STOPPED, "CLD_STOPPED", "Child has stopped" },
-#endif
-#if defined (SIGCLD) && defined (CLD_CONTINUED)
- { SIGCLD, CLD_CONTINUED, "CLD_CONTINUED", "Stopped child had continued" },
-#endif
-#if defined (SIGPOLL) && defined (POLL_IN)
- { SIGPOLL, POLL_IN, "POLL_IN", "Input input available" },
-#endif
-#if defined (SIGPOLL) && defined (POLL_OUT)
- { SIGPOLL, POLL_OUT, "POLL_OUT", "Output buffers available" },
-#endif
-#if defined (SIGPOLL) && defined (POLL_MSG)
- { SIGPOLL, POLL_MSG, "POLL_MSG", "Input message available" },
-#endif
-#if defined (SIGPOLL) && defined (POLL_ERR)
- { SIGPOLL, POLL_ERR, "POLL_ERR", "I/O error" },
-#endif
-#if defined (SIGPOLL) && defined (POLL_PRI)
- { SIGPOLL, POLL_PRI, "POLL_PRI", "High priority input available" },
-#endif
-#if defined (SIGPOLL) && defined (POLL_HUP)
- { SIGPOLL, POLL_HUP, "POLL_HUP", "Device disconnected" },
-#endif
- { 0, 0, NULL, NULL }
-};
+ int status_valid : 1;
+ int gregs_valid : 1;
+ int fpregs_valid : 1;
+ int threads_valid: 1;
+} procinfo;
-static char *syscall_table[MAX_SYSCALLS];
+static char errmsg[128]; /* shared error msg buffer */
-/* Prototypes for local functions */
+/* Function prototypes for procinfo module: */
-static void procfs_stop PARAMS ((void));
+static procinfo *find_procinfo_or_die PARAMS ((int pid, int tid));
+static procinfo *find_procinfo PARAMS ((int pid, int tid));
+static procinfo *create_procinfo PARAMS ((int pid, int tid));
+static void destroy_procinfo PARAMS ((procinfo *p));
+static void dead_procinfo PARAMS ((procinfo *p,
+ char *msg, int killp));
+static int open_procinfo_files PARAMS ((procinfo *p, int which));
+static void close_procinfo_files PARAMS ((procinfo *p));
-static int procfs_thread_alive PARAMS ((int));
+/* The head of the procinfo list: */
+static procinfo * procinfo_list;
-static int procfs_can_run PARAMS ((void));
+/*
+ * Function: find_procinfo
+ *
+ * Search the procinfo list.
+ *
+ * Returns: pointer to procinfo, or NULL if not found.
+ */
-static void procfs_mourn_inferior PARAMS ((void));
+static procinfo *
+find_procinfo (pid, tid)
+ int pid;
+ int tid;
+{
+ procinfo *pi;
-static void procfs_fetch_registers PARAMS ((int));
+ for (pi = procinfo_list; pi; pi = pi->next)
+ if (pi->pid == pid)
+ break;
-static int procfs_wait PARAMS ((int, struct target_waitstatus *));
+ if (pi)
+ if (tid)
+ {
+ /* Don't check threads_valid. If we're updating the
+ thread_list, we want to find whatever threads are already
+ here. This means that in general it is the caller's
+ responsibility to check threads_valid and update before
+ calling find_procinfo, if the caller wants to find a new
+ thread. */
+
+ for (pi = pi->thread_list; pi; pi = pi->next)
+ if (pi->tid == tid)
+ break;
+ }
-static void procfs_open PARAMS ((char *, int));
+ return pi;
+}
-static void procfs_files_info PARAMS ((struct target_ops *));
+/*
+ * Function: find_procinfo_or_die
+ *
+ * Calls find_procinfo, but errors on failure.
+ */
-static void procfs_prepare_to_store PARAMS ((void));
+static procinfo *
+find_procinfo_or_die (pid, tid)
+ int pid;
+ int tid;
+{
+ procinfo *pi = find_procinfo (pid, tid);
-static void procfs_detach PARAMS ((char *, int));
+ if (pi == NULL)
+ {
+ if (tid)
+ error ("procfs: couldn't find pid %d (kernel thread %d) in procinfo list.",
+ pid, tid);
+ else
+ error ("procfs: couldn't find pid %d in procinfo list.", pid);
+ }
+ return pi;
+}
-static void procfs_attach PARAMS ((char *, int));
+/*
+ * Function: open_procinfo_files
+ *
+ * Open the file descriptor for the process or LWP.
+ * ifdef NEW_PROC_API, we only open the control file descriptor;
+ * the others are opened lazily as needed.
+ * else (if not NEW_PROC_API), there is only one real
+ * file descriptor, but we keep multiple copies of it so that
+ * the code that uses them does not have to be #ifdef'd.
+ *
+ * Return: file descriptor, or zero for failure.
+ */
-static void proc_set_exec_trap PARAMS ((void));
+enum { FD_CTL, FD_STATUS, FD_AS };
-static void procfs_init_inferior PARAMS ((int));
+static int
+open_procinfo_files (pi, which)
+ procinfo *pi;
+ int which;
+{
+#ifdef NEW_PROC_API
+ char tmp[MAX_PROC_NAME_SIZE];
+#endif
+ int fd;
+
+ /*
+ * This function is getting ALMOST long enough to break up into several.
+ * Here is some rationale:
+ *
+ * NEW_PROC_API (Solaris 2.6, Solaris 2.7, Unixware):
+ * There are several file descriptors that may need to be open
+ * for any given process or LWP. The ones we're intereted in are:
+ * - control (ctl) write-only change the state
+ * - status (status) read-only query the state
+ * - address space (as) read/write access memory
+ * - map (map) read-only virtual addr map
+ * Most of these are opened lazily as they are needed.
+ * The pathnames for the 'files' for an LWP look slightly
+ * different from those of a first-class process:
+ * Pathnames for a process (<proc-id>):
+ * /proc/<proc-id>/ctl
+ * /proc/<proc-id>/status
+ * /proc/<proc-id>/as
+ * /proc/<proc-id>/map
+ * Pathnames for an LWP (lwp-id):
+ * /proc/<proc-id>/lwp/<lwp-id>/lwpctl
+ * /proc/<proc-id>/lwp/<lwp-id>/lwpstatus
+ * An LWP has no map or address space file descriptor, since
+ * the memory map and address space are shared by all LWPs.
+ *
+ * Everyone else (Solaris 2.5, Irix, OSF)
+ * There is only one file descriptor for each process or LWP.
+ * For convenience, we copy the same file descriptor into all
+ * three fields of the procinfo struct (ctl_fd, status_fd, and
+ * as_fd, see NEW_PROC_API above) so that code that uses them
+ * doesn't need any #ifdef's.
+ * Pathname for all:
+ * /proc/<proc-id>
+ *
+ * Solaris 2.5 LWP's:
+ * Each LWP has an independent file descriptor, but these
+ * are not obtained via the 'open' system call like the rest:
+ * instead, they're obtained thru an ioctl call (PIOCOPENLWP)
+ * to the file descriptor of the parent process.
+ *
+ * OSF threads:
+ * These do not even have their own independent file descriptor.
+ * All operations are carried out on the file descriptor of the
+ * parent process. Therefore we just call open again for each
+ * thread, getting a new handle for the same 'file'.
+ */
+
+#ifdef NEW_PROC_API
+ /*
+ * In this case, there are several different file descriptors that
+ * we might be asked to open. The control file descriptor will be
+ * opened early, but the others will be opened lazily as they are
+ * needed.
+ */
+
+ strcpy (tmp, pi->pathname);
+ switch (which) { /* which file descriptor to open? */
+ case FD_CTL:
+ if (pi->tid)
+ strcat (tmp, "/lwpctl");
+ else
+ strcat (tmp, "/ctl");
+ fd = open (tmp, O_WRONLY);
+ if (fd <= 0)
+ return 0; /* fail */
+ pi->ctl_fd = fd;
+ break;
+ case FD_AS:
+ if (pi->tid)
+ return 0; /* there is no 'as' file descriptor for an lwp */
+ strcat (tmp, "/as");
+ fd = open (tmp, O_RDWR);
+ if (fd <= 0)
+ return 0; /* fail */
+ pi->as_fd = fd;
+ break;
+ case FD_STATUS:
+ if (pi->tid)
+ strcat (tmp, "/lwpstatus");
+ else
+ strcat (tmp, "/status");
+ fd = open (tmp, O_RDONLY);
+ if (fd <= 0)
+ return 0; /* fail */
+ pi->status_fd = fd;
+ break;
+ default:
+ return 0; /* unknown file descriptor */
+ }
+#else /* not NEW_PROC_API */
+ /*
+ * In this case, there is only one file descriptor for each procinfo
+ * (ie. each process or LWP). In fact, only the file descriptor for
+ * the process can actually be opened by an 'open' system call.
+ * The ones for the LWPs have to be obtained thru an IOCTL call
+ * on the process's file descriptor.
+ *
+ * For convenience, we copy each procinfo's single file descriptor
+ * into all of the fields occupied by the several file descriptors
+ * of the NEW_PROC_API implementation. That way, the code that uses
+ * them can be written without ifdefs.
+ */
+
+
+#ifdef PIOCTSTATUS /* OSF */
+ if ((fd = open (pi->pathname, O_RDWR)) == 0) /* Only one FD; just open it. */
+ return 0;
+#else /* Sol 2.5, Irix, other? */
+ if (pi->tid == 0) /* Master procinfo for the process */
+ {
+ fd = open (pi->pathname, O_RDWR);
+ if (fd <= 0)
+ return 0; /* fail */
+ }
+ else /* LWP thread procinfo */
+ {
+#ifdef PIOCOPENLWP /* Sol 2.5, thread/LWP */
+ procinfo *process;
+ int lwpid = pi->tid;
+
+ /* Find the procinfo for the entire process. */
+ if ((process = find_procinfo (pi->pid, 0)) == NULL)
+ return 0; /* fail */
+
+ /* Now obtain the file descriptor for the LWP. */
+ if ((fd = ioctl (process->ctl_fd, PIOCOPENLWP, &lwpid)) <= 0)
+ return 0; /* fail */
+#else /* Irix, other? */
+ return 0; /* Don't know how to open threads */
+#endif /* Sol 2.5 PIOCOPENLWP */
+ }
+#endif /* OSF PIOCTSTATUS */
+ pi->ctl_fd = pi->as_fd = pi->status_fd = fd;
+#endif /* NEW_PROC_API */
-static struct procinfo *create_procinfo PARAMS ((int));
+ return 1; /* success */
+}
-static void procfs_store_registers PARAMS ((int));
+/*
+ * Function: create_procinfo
+ *
+ * Allocate a data structure and link it into the procinfo list.
+ * (First tries to find a pre-existing one (FIXME: why???)
+ *
+ * Return: pointer to new procinfo struct.
+ */
-static int procfs_xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
+static procinfo *
+create_procinfo (pid, tid)
+ int pid;
+ int tid;
+{
+ procinfo *pi, *parent;
-static void procfs_kill_inferior PARAMS ((void));
+ if ((pi = find_procinfo (pid, tid)))
+ return pi; /* Already exists, nothing to do. */
-static char *sigcodedesc PARAMS ((siginfo_t *));
+ /* find parent before doing malloc, to save having to cleanup */
+ if (tid != 0)
+ parent = find_procinfo_or_die (pid, 0); /* FIXME: should I
+ create it if it
+ doesn't exist yet? */
-static char *sigcodename PARAMS ((siginfo_t *));
+ pi = (procinfo *) xmalloc (sizeof (procinfo));
+ memset (pi, 0, sizeof (procinfo));
+ pi->pid = pid;
+ pi->tid = tid;
-static struct procinfo *wait_fd PARAMS ((void));
+ /* Chain into list. */
+ if (tid == 0)
+ {
+ sprintf (pi->pathname, MAIN_PROC_NAME_FMT, pid);
+ pi->next = procinfo_list;
+ procinfo_list = pi;
+ }
+ else
+ {
+#ifdef NEW_PROC_API
+ sprintf (pi->pathname, "/proc/%05d/lwp/%d", pid, tid);
+#else
+ sprintf (pi->pathname, MAIN_PROC_NAME_FMT, pid);
+#endif
+ pi->next = parent->thread_list;
+ parent->thread_list = pi;
+ }
+ return pi;
+}
-static void remove_fd PARAMS ((struct procinfo *));
+/*
+ * Function: close_procinfo_files
+ *
+ * Close all file descriptors associated with the procinfo
+ */
-static void add_fd PARAMS ((struct procinfo *));
+static void
+close_procinfo_files (pi)
+ procinfo *pi;
+{
+ if (pi->ctl_fd > 0)
+ close (pi->ctl_fd);
+#ifdef NEW_PROC_API
+ if (pi->as_fd > 0)
+ close (pi->as_fd);
+ if (pi->status_fd > 0)
+ close (pi->status_fd);
+#endif
+ pi->ctl_fd = pi->as_fd = pi->status_fd = 0;
+}
-static void set_proc_siginfo PARAMS ((struct procinfo *, int));
+/*
+ * Function: destroy_procinfo
+ *
+ * Destructor function. Close, unlink and deallocate the object.
+ */
-static void init_syscall_table PARAMS ((void));
+static void
+destroy_one_procinfo (list, pi)
+ procinfo **list;
+ procinfo *pi;
+{
+ procinfo *ptr;
+
+ /* Step one: unlink the procinfo from its list */
+ if (pi == *list)
+ *list = pi->next;
+ else
+ for (ptr = *list; ptr; ptr = ptr->next)
+ if (ptr->next == pi)
+ {
+ ptr->next = pi->next;
+ break;
+ }
-static char *syscallname PARAMS ((int));
+ /* Step two: close any open file descriptors */
+ close_procinfo_files (pi);
-static char *signalname PARAMS ((int));
+ /* Step three: free the memory. */
+ free (pi);
+}
-static char *errnoname PARAMS ((int));
+static void
+destroy_procinfo (pi)
+ procinfo *pi;
+{
+ procinfo *tmp;
-static int proc_address_to_fd PARAMS ((struct procinfo *, CORE_ADDR, int));
+ if (pi->tid != 0) /* destroy a thread procinfo */
+ {
+ tmp = find_procinfo (pi->pid, 0); /* find the parent process */
+ destroy_one_procinfo (&tmp->thread_list, pi);
+ }
+ else /* destroy a process procinfo and all its threads */
+ {
+ /* First destroy the children, if any; */
+ while (pi->thread_list != NULL)
+ destroy_one_procinfo (&pi->thread_list, pi->thread_list);
+ /* Then destroy the parent. Genocide!!! */
+ destroy_one_procinfo (&procinfo_list, pi);
+ }
+}
-static int open_proc_file PARAMS ((int, struct procinfo *, int, int));
+enum { NOKILL, KILL };
-static void close_proc_file PARAMS ((struct procinfo *));
+/*
+ * Function: dead_procinfo
+ *
+ * To be called on a non_recoverable error for a procinfo.
+ * Prints error messages, optionally sends a SIGKILL to the process,
+ * then destroys the data structure.
+ */
-static void unconditionally_kill_inferior PARAMS ((struct procinfo *));
+static void
+dead_procinfo (pi, msg, kill_p)
+ procinfo *pi;
+ char *msg;
+ int kill_p;
+{
+ char procfile[80];
-static NORETURN void proc_init_failed PARAMS ((struct procinfo *, char *, int)) ATTR_NORETURN;
+ if (pi->pathname)
+ {
+ print_sys_errmsg (pi->pathname, errno);
+ }
+ else
+ {
+ sprintf (procfile, "process %d", pi->pid);
+ print_sys_errmsg (procfile, errno);
+ }
+ if (kill_p == KILL)
+ kill (pi->pid, SIGKILL);
-static void info_proc PARAMS ((char *, int));
+ destroy_procinfo (pi);
+ error (msg);
+}
-static void info_proc_flags PARAMS ((struct procinfo *, int));
+/* =================== END, STRUCT PROCINFO "MODULE" =================== */
-static void info_proc_stop PARAMS ((struct procinfo *, int));
+/* =================== /proc "MODULE" =================== */
-static void info_proc_siginfo PARAMS ((struct procinfo *, int));
+/*
+ * This "module" is the interface layer between the /proc system API
+ * and the gdb target vector functions. This layer consists of
+ * access functions that encapsulate each of the basic operations
+ * that we need to use from the /proc API.
+ *
+ * The main motivation for this layer is to hide the fact that
+ * there are two very different implementations of the /proc API.
+ * Rather than have a bunch of #ifdefs all thru the gdb target vector
+ * functions, we do our best to hide them all in here.
+ */
-static void info_proc_syscalls PARAMS ((struct procinfo *, int));
+int proc_get_status PARAMS ((procinfo *pi));
+long proc_flags PARAMS ((procinfo *pi));
+int proc_why PARAMS ((procinfo *pi));
+int proc_what PARAMS ((procinfo *pi));
+int proc_set_run_on_last_close PARAMS ((procinfo *pi));
+int proc_unset_run_on_last_close PARAMS ((procinfo *pi));
+int proc_set_inherit_on_fork PARAMS ((procinfo *pi));
+int proc_unset_inherit_on_fork PARAMS ((procinfo *pi));
+int proc_set_async PARAMS ((procinfo *pi));
+int proc_unset_async PARAMS ((procinfo *pi));
+int proc_stop_process PARAMS ((procinfo *pi));
+int proc_trace_signal PARAMS ((procinfo *pi, int signo));
+int proc_ignore_signal PARAMS ((procinfo *pi, int signo));
+int proc_clear_current_fault PARAMS ((procinfo *pi));
+int proc_set_current_signal PARAMS ((procinfo *pi, int signo));
+int proc_clear_current_signal PARAMS ((procinfo *pi));
+int proc_set_gregs PARAMS ((procinfo *pi));
+int proc_set_fpregs PARAMS ((procinfo *pi));
+int proc_wait_for_stop PARAMS ((procinfo *pi));
+int proc_run_process PARAMS ((procinfo *pi, int step, int signo));
+int proc_kill PARAMS ((procinfo *pi, int signo));
+int proc_parent_pid PARAMS ((procinfo *pi));
+int proc_get_nthreads PARAMS ((procinfo *pi));
+int proc_get_current_thread PARAMS ((procinfo *pi));
+int proc_set_held_signals PARAMS ((procinfo *pi, sigset_t *sighold));
+int proc_set_traced_sysexit PARAMS ((procinfo *pi, sysset_t *sysset));
+int proc_set_traced_sysentry PARAMS ((procinfo *pi, sysset_t *sysset));
+int proc_set_traced_faults PARAMS ((procinfo *pi, fltset_t *fltset));
+int proc_set_traced_signals PARAMS ((procinfo *pi, sigset_t *sigset));
+
+int proc_update_threads PARAMS ((procinfo *pi));
+int proc_iterate_over_threads PARAMS ((procinfo *pi,
+ int (*func) PARAMS ((procinfo *,
+ procinfo *,
+ void *)),
+ void *ptr));
+
+gdb_gregset_t *proc_get_gregs PARAMS ((procinfo *pi));
+gdb_fpregset_t *proc_get_fpregs PARAMS ((procinfo *pi));
+sysset_t *proc_get_traced_sysexit PARAMS ((procinfo *pi, sysset_t *save));
+sysset_t *proc_get_traced_sysentry PARAMS ((procinfo *pi, sysset_t *save));
+fltset_t *proc_get_traced_faults PARAMS ((procinfo *pi, fltset_t *save));
+sigset_t *proc_get_traced_signals PARAMS ((procinfo *pi, sigset_t *save));
+sigset_t *proc_get_held_signals PARAMS ((procinfo *pi, sigset_t *save));
+sigset_t *proc_get_pending_signals PARAMS ((procinfo *pi, sigset_t *save));
+struct sigaction *proc_get_signal_actions PARAMS ((procinfo *pi,
+ struct sigaction *save));
+
+void proc_warn PARAMS ((procinfo *pi, char *func, int line));
+void proc_error PARAMS ((procinfo *pi, char *func, int line));
-static void info_proc_mappings PARAMS ((struct procinfo *, int));
+void
+proc_warn (pi, func, line)
+ procinfo *pi;
+ char *func;
+ int line;
+{
+ sprintf (errmsg, "procfs: %s line %d, %s", func, line, pi->pathname);
+ print_sys_errmsg (errmsg, errno);
+}
-static void info_proc_signals PARAMS ((struct procinfo *, int));
+void
+proc_error (pi, func, line)
+ procinfo *pi;
+ char *func;
+ int line;
+{
+ sprintf (errmsg, "procfs: %s line %d, %s", func, line, pi->pathname);
+ perror_with_name (errmsg);
+}
-static void info_proc_faults PARAMS ((struct procinfo *, int));
+/*
+ * Function: proc_get_status
+ *
+ * Updates the status struct in the procinfo.
+ * There is a 'valid' flag, to let other functions know when
+ * this function needs to be called (so the status is only
+ * read when it is needed). The status file descriptor is
+ * also only opened when it is needed.
+ *
+ * Return: non-zero for success, zero for failure.
+ */
-static char *mappingflags PARAMS ((long));
+int
+proc_get_status (pi)
+ procinfo *pi;
+{
+ /* Status file descriptor is opened "lazily" */
+ if (pi->status_fd == 0 &&
+ open_procinfo_files (pi, FD_STATUS) == 0)
+ {
+ pi->status_valid = 0;
+ return 0;
+ }
-static char *lookupname PARAMS ((struct trans *, unsigned int, char *));
+#ifdef NEW_PROC_API
+ if (lseek (pi->status_fd, 0, SEEK_SET) < 0)
+ pi->status_valid = 0; /* fail */
+ else
+ {
+ /* Sigh... I have to read a different data structure,
+ depending on whether this is a main process or an LWP. */
+ if (pi->tid)
+ pi->status_valid = (read (pi->status_fd,
+ (char *) &pi->prstatus.pr_lwp,
+ sizeof (lwpstatus_t))
+ == sizeof (lwpstatus_t));
+ else
+ {
+ pi->status_valid = (read (pi->status_fd,
+ (char *) &pi->prstatus,
+ sizeof (gdb_prstatus_t))
+ == sizeof (gdb_prstatus_t));
+#if 0 /*def UNIXWARE*/
+ if (pi->status_valid &&
+ (pi->prstatus.pr_lwp.pr_flags & PR_ISTOP) &&
+ pi->prstatus.pr_lwp.pr_why == PR_REQUESTED)
+ /* Unixware peculiarity -- read the damn thing again! */
+ pi->status_valid = (read (pi->status_fd,
+ (char *) &pi->prstatus,
+ sizeof (gdb_prstatus_t))
+ == sizeof (gdb_prstatus_t));
+#endif /* UNIXWARE */
+ }
+ }
+#else /* ioctl method */
+#ifdef PIOCTSTATUS /* osf */
+ if (pi->tid == 0) /* main process */
+ {
+ /* Just read the danged status. Now isn't that simple? */
+ pi->status_valid =
+ (ioctl (pi->status_fd, PIOCSTATUS, &pi->prstatus) >= 0);
+ }
+ else
+ {
+ int win;
+ struct {
+ long pr_count;
+ tid_t pr_error_thread;
+ struct prstatus status;
+ } thread_status;
+
+ thread_status.pr_count = 1;
+ thread_status.status.pr_tid = pi->tid;
+ win = (ioctl (pi->status_fd, PIOCTSTATUS, &thread_status) >= 0);
+ if (win)
+ {
+ memcpy (&pi->prstatus, &thread_status.status,
+ sizeof (pi->prstatus));
+ pi->status_valid = 1;
+ }
+ }
+#else
+ /* Just read the danged status. Now isn't that simple? */
+ pi->status_valid = (ioctl (pi->status_fd, PIOCSTATUS, &pi->prstatus) >= 0);
+#endif
+#endif
-static char *lookupdesc PARAMS ((struct trans *, unsigned int));
+ if (pi->status_valid)
+ {
+ PROC_PRETTYFPRINT_STATUS (proc_flags (pi),
+ proc_why (pi),
+ proc_what (pi),
+ proc_get_current_thread (pi));
+ }
-static int do_attach PARAMS ((int pid));
+ /* The status struct includes general regs, so mark them valid too */
+ pi->gregs_valid = pi->status_valid;
+#ifdef NEW_PROC_API
+ /* In the read/write multiple-fd model,
+ the status struct includes the fp regs too, so mark them valid too */
+ pi->fpregs_valid = pi->status_valid;
+#endif
+ return pi->status_valid; /* True if success, false if failure. */
+}
-static void do_detach PARAMS ((int siggnal));
+/*
+ * Function: proc_flags
+ *
+ * returns the process flags (pr_flags field).
+ */
+
+long
+proc_flags (pi)
+ procinfo *pi;
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0; /* FIXME: not a good failure value (but what is?) */
+
+#ifdef NEW_PROC_API
+# ifdef UNIXWARE
+ /* UnixWare 7.1 puts process status flags, e.g. PR_ASYNC, in
+ pstatus_t and LWP status flags, e.g. PR_STOPPED, in lwpstatus_t.
+ The two sets of flags don't overlap. */
+ return pi->prstatus.pr_flags | pi->prstatus.pr_lwp.pr_flags;
+# else
+ return pi->prstatus.pr_lwp.pr_flags;
+# endif
+#else
+ return pi->prstatus.pr_flags;
+#endif
+}
-static void procfs_create_inferior PARAMS ((char *, char *, char **));
+/*
+ * Function: proc_why
+ *
+ * returns the pr_why field (why the process stopped).
+ */
-static void procfs_notice_signals PARAMS ((int pid));
-
-static void notice_signals PARAMS ((struct procinfo *, struct sig_ctl *));
-
-static struct procinfo *find_procinfo PARAMS ((pid_t pid, int okfail));
-
-static int procfs_write_pcwstop PARAMS ((struct procinfo *));
-static int procfs_read_status PARAMS ((struct procinfo *));
-static void procfs_write_pckill PARAMS ((struct procinfo *));
-
-typedef int syscall_func_t PARAMS ((struct procinfo *pi, int syscall_num,
- int why, int *rtnval, int *statval));
+int
+proc_why (pi)
+ procinfo *pi;
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0; /* FIXME: not a good failure value (but what is?) */
-static void procfs_set_syscall_trap PARAMS ((struct procinfo *pi,
- int syscall_num, int flags,
- syscall_func_t *func));
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_why;
+#else
+ return pi->prstatus.pr_why;
+#endif
+}
-static void procfs_clear_syscall_trap PARAMS ((struct procinfo *pi,
- int syscall_num, int errok));
+/*
+ * Function: proc_what
+ *
+ * returns the pr_what field (details of why the process stopped).
+ */
-#define PROCFS_SYSCALL_ENTRY 0x1 /* Trap on entry to sys call */
-#define PROCFS_SYSCALL_EXIT 0x2 /* Trap on exit from sys call */
+int
+proc_what (pi)
+ procinfo *pi;
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0; /* FIXME: not a good failure value (but what is?) */
-static syscall_func_t procfs_exit_handler;
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_what;
+#else
+ return pi->prstatus.pr_what;
+#endif
+}
-static syscall_func_t procfs_exec_handler;
+#ifndef PIOCSSPCACT /* The following is not supported on OSF. */
+/*
+ * Function: proc_nsysarg
+ *
+ * returns the pr_nsysarg field (number of args to the current syscall).
+ */
-#ifdef SYS_sproc
-static syscall_func_t procfs_sproc_handler;
-static syscall_func_t procfs_fork_handler;
+int
+proc_nsysarg (pi)
+ procinfo *pi;
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0;
+
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_nsysarg;
+#else
+ return pi->prstatus.pr_nsysarg;
#endif
+}
-#ifdef SYS_lwp_create
-static syscall_func_t procfs_lwp_creation_handler;
-#endif
+/*
+ * Function: proc_sysargs
+ *
+ * returns the pr_sysarg field (pointer to the arguments of current syscall).
+ */
-static void modify_inherit_on_fork_flag PARAMS ((int fd, int flag));
-static void modify_run_on_last_close_flag PARAMS ((int fd, int flag));
+long *
+proc_sysargs (pi)
+ procinfo *pi;
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
+
+#ifdef NEW_PROC_API
+ return (long *) &pi->prstatus.pr_lwp.pr_sysarg;
+#else
+ return (long *) &pi->prstatus.pr_sysarg;
+#endif
+}
-/* */
+/*
+ * Function: proc_syscall
+ *
+ * returns the pr_syscall field (id of current syscall if we are in one).
+ */
-struct procfs_syscall_handler
+int
+proc_syscall (pi)
+ procinfo *pi;
{
- int syscall_num; /* The number of the system call being handled */
- /* The function to be called */
- syscall_func_t *func;
-};
-
-static void procfs_resume PARAMS ((int pid, int step,
- enum target_signal signo));
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0;
+
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_syscall;
+#else
+ return pi->prstatus.pr_syscall;
+#endif
+}
+#endif /* PIOCSSPCACT */
-static void init_procfs_ops PARAMS ((void));
+/*
+ * Function: proc_cursig:
+ *
+ * returns the pr_cursig field (current signal).
+ */
-/* External function prototypes that can't be easily included in any
- header file because the args are typedefs in system include files. */
+long
+proc_cursig (struct procinfo *pi)
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0; /* FIXME: not a good failure value (but what is?) */
-extern void supply_gregset PARAMS ((gdb_gregset_t *));
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_cursig;
+#else
+ return pi->prstatus.pr_cursig;
+#endif
+}
-extern void fill_gregset PARAMS ((gdb_gregset_t *, int));
+/*
+ * Function: proc_modify_flag
+ *
+ * === I appologize for the messiness of this function.
+ * === This is an area where the different versions of
+ * === /proc are more inconsistent than usual. MVS
+ *
+ * Set or reset any of the following process flags:
+ * PR_FORK -- forked child will inherit trace flags
+ * PR_RLC -- traced process runs when last /proc file closed.
+ * PR_KLC -- traced process is killed when last /proc file closed.
+ * PR_ASYNC -- LWP's get to run/stop independently.
+ *
+ * There are three methods for doing this function:
+ * 1) Newest: read/write [PCSET/PCRESET/PCUNSET]
+ * [Sol6, Sol7, UW]
+ * 2) Middle: PIOCSET/PIOCRESET
+ * [Irix, Sol5]
+ * 3) Oldest: PIOCSFORK/PIOCRFORK/PIOCSRLC/PIOCRRLC
+ * [OSF, Sol5]
+ *
+ * Note: Irix does not define PR_ASYNC.
+ * Note: OSF does not define PR_KLC.
+ * Note: OSF is the only one that can ONLY use the oldest method.
+ *
+ * Arguments:
+ * pi -- the procinfo
+ * flag -- one of PR_FORK, PR_RLC, or PR_ASYNC
+ * mode -- 1 for set, 0 for reset.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
-#ifdef FP0_REGNUM
-extern void supply_fpregset PARAMS ((gdb_fpregset_t *));
+enum { FLAG_RESET, FLAG_SET };
-extern void fill_fpregset PARAMS ((gdb_fpregset_t *, int));
+static int
+proc_modify_flag (pi, flag, mode)
+ procinfo *pi;
+ long flag;
+ long mode;
+{
+ long win = 0; /* default to fail */
+
+ /*
+ * These operations affect the process as a whole, and applying
+ * them to an individual LWP has the same meaning as applying them
+ * to the main process. Therefore, if we're ever called with a
+ * pointer to an LWP's procinfo, let's substitute the process's
+ * procinfo and avoid opening the LWP's file descriptor
+ * unnecessarily.
+ */
+
+ if (pi->pid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API /* Newest method: UnixWare and newer Solarii */
+ /* First normalize the PCUNSET/PCRESET command opcode
+ (which for no obvious reason has a different definition
+ from one operating system to the next...) */
+#ifdef PCUNSET
+#define GDBRESET PCUNSET
+#endif
+#ifdef PCRESET
+#define GDBRESET PCRESET
#endif
+ {
+ long arg[2];
-/*
+ if (mode == FLAG_SET) /* Set the flag (RLC, FORK, or ASYNC) */
+ arg[0] = PCSET;
+ else /* Reset the flag */
+ arg[0] = GDBRESET;
-LOCAL FUNCTION
+ arg[1] = flag;
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else
+#ifdef PIOCSET /* Irix/Sol5 method */
+ if (mode == FLAG_SET) /* Set the flag (hopefully RLC, FORK, or ASYNC) */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCSET, &flag) >= 0);
+ }
+ else /* Reset the flag */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCRESET, &flag) >= 0);
+ }
- find_procinfo -- convert a process id to a struct procinfo
+#else
+#ifdef PIOCSRLC /* Oldest method: OSF */
+ switch (flag) {
+ case PR_RLC:
+ if (mode == FLAG_SET) /* Set run-on-last-close */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCSRLC, NULL) >= 0);
+ }
+ else /* Clear run-on-last-close */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCRRLC, NULL) >= 0);
+ }
+ break;
+ case PR_FORK:
+ if (mode == FLAG_SET) /* Set inherit-on-fork */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCSFORK, NULL) >= 0);
+ }
+ else /* Clear inherit-on-fork */
+ {
+ win = (ioctl (pi->ctl_fd, PIOCRFORK, NULL) >= 0);
+ }
+ break;
+ default:
+ win = 0; /* fail -- unknown flag (can't do PR_ASYNC) */
+ break;
+ }
+#endif
+#endif
+#endif
+#undef GDBRESET
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
-SYNOPSIS
+ if (!win)
+ warning ("procfs: modify_flag failed to turn %s %s",
+ flag == PR_FORK ? "PR_FORK" :
+ flag == PR_RLC ? "PR_RLC" :
+#ifdef PR_ASYNC
+ flag == PR_ASYNC ? "PR_ASYNC" :
+#endif
+#ifdef PR_KLC
+ flag == PR_KLC ? "PR_KLC" :
+#endif
+ "<unknown flag>",
+ mode == FLAG_RESET ? "off" : "on");
- static struct procinfo * find_procinfo (pid_t pid, int okfail);
+ return win;
+}
-DESCRIPTION
-
- Given a process id, look it up in the procinfo chain. Returns
- a struct procinfo *. If can't find pid, then call error(),
- unless okfail is set, in which case, return NULL;
+/*
+ * Function: proc_set_run_on_last_close
+ *
+ * Set the run_on_last_close flag.
+ * Process with all threads will become runnable
+ * when debugger closes all /proc fds.
+ *
+ * Returns non-zero for success, zero for failure.
*/
-static struct procinfo *
-find_procinfo (pid, okfail)
- pid_t pid;
- int okfail;
+int
+proc_set_run_on_last_close (pi)
+ procinfo *pi;
{
- struct procinfo *procinfo;
-
- for (procinfo = procinfo_list; procinfo; procinfo = procinfo->next)
- if (procinfo->pid == pid)
- return procinfo;
-
- if (okfail)
- return NULL;
-
- error ("procfs (find_procinfo): Couldn't locate pid %d", pid);
+ return proc_modify_flag (pi, PR_RLC, FLAG_SET);
}
/*
+ * Function: proc_unset_run_on_last_close
+ *
+ * Reset the run_on_last_close flag.
+ * Process will NOT become runnable
+ * when debugger closes its file handles.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
-LOCAL MACRO
-
- current_procinfo -- convert inferior_pid to a struct procinfo
-
-SYNOPSIS
-
- static struct procinfo * current_procinfo;
+int
+proc_unset_run_on_last_close (pi)
+ procinfo *pi;
+{
+ return proc_modify_flag (pi, PR_RLC, FLAG_RESET);
+}
-DESCRIPTION
-
- Looks up inferior_pid in the procinfo chain. Always returns a
- struct procinfo *. If process can't be found, we error() out.
+#ifdef PR_KLC
+/*
+ * Function: proc_set_kill_on_last_close
+ *
+ * Set the kill_on_last_close flag.
+ * Process with all threads will be killed when debugger
+ * closes all /proc fds (or debugger exits or dies).
+ *
+ * Returns non-zero for success, zero for failure.
*/
-#define current_procinfo find_procinfo (inferior_pid, 0)
+int
+proc_set_kill_on_last_close (pi)
+ procinfo *pi;
+{
+ return proc_modify_flag (pi, PR_KLC, FLAG_SET);
+}
/*
+ * Function: proc_unset_kill_on_last_close
+ *
+ * Reset the kill_on_last_close flag.
+ * Process will NOT be killed when debugger
+ * closes its file handles (or exits or dies).
+ *
+ * Returns non-zero for success, zero for failure.
+ */
-LOCAL FUNCTION
-
- add_fd -- Add the fd to the poll/select list
+int
+proc_unset_kill_on_last_close (pi)
+ procinfo *pi;
+{
+ return proc_modify_flag (pi, PR_KLC, FLAG_RESET);
+}
+#endif /* PR_KLC */
-SYNOPSIS
+/*
+ * Function: proc_set_inherit_on_fork
+ *
+ * Set inherit_on_fork flag.
+ * If the process forks a child while we are registered for events
+ * in the parent, then we will also recieve events from the child.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
- static void add_fd (struct procinfo *);
+int
+proc_set_inherit_on_fork (pi)
+ procinfo *pi;
+{
+ return proc_modify_flag (pi, PR_FORK, FLAG_SET);
+}
-DESCRIPTION
-
- Add the fd of the supplied procinfo to the list of fds used for
- poll/select operations.
+/*
+ * Function: proc_unset_inherit_on_fork
+ *
+ * Reset inherit_on_fork flag.
+ * If the process forks a child while we are registered for events
+ * in the parent, then we will NOT recieve events from the child.
+ *
+ * Returns non-zero for success, zero for failure.
*/
-static void
-add_fd (pi)
- struct procinfo *pi;
+int
+proc_unset_inherit_on_fork (pi)
+ procinfo *pi;
{
- if (num_poll_list <= 0)
- poll_list = (struct pollfd *) xmalloc (sizeof (struct pollfd));
- else
- poll_list = (struct pollfd *) xrealloc (poll_list,
- (num_poll_list + 1)
- * sizeof (struct pollfd));
- poll_list[num_poll_list].fd = pi->ctl_fd;
-#ifdef UNIXWARE
- poll_list[num_poll_list].events = POLLWRNORM;
-#else
- poll_list[num_poll_list].events = POLLPRI;
-#endif
-
- num_poll_list++;
+ return proc_modify_flag (pi, PR_FORK, FLAG_RESET);
}
+#ifdef PR_ASYNC
/*
+ * Function: proc_set_async
+ *
+ * Set PR_ASYNC flag.
+ * If one LWP stops because of a debug event (signal etc.),
+ * the remaining LWPs will continue to run.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
-LOCAL FUNCTION
-
- remove_fd -- Remove the fd from the poll/select list
+int
+proc_set_async (pi)
+ procinfo *pi;
+{
+ return proc_modify_flag (pi, PR_ASYNC, FLAG_SET);
+}
-SYNOPSIS
+/*
+ * Function: proc_unset_async
+ *
+ * Reset PR_ASYNC flag.
+ * If one LWP stops because of a debug event (signal etc.),
+ * then all other LWPs will stop as well.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
- static void remove_fd (struct procinfo *);
+int
+proc_unset_async (pi)
+ procinfo *pi;
+{
+ return proc_modify_flag (pi, PR_ASYNC, FLAG_RESET);
+}
+#endif /* PR_ASYNC */
-DESCRIPTION
-
- Remove the fd of the supplied procinfo from the list of fds used
- for poll/select operations.
+/*
+ * Function: proc_stop_process
+ *
+ * Request the process/LWP to stop. Does not wait.
+ * Returns non-zero for success, zero for failure.
*/
-static void
-remove_fd (pi)
- struct procinfo *pi;
+int
+proc_stop_process (pi)
+ procinfo *pi;
{
- int i;
+ int win;
- for (i = 0; i < num_poll_list; i++)
+ /*
+ * We might conceivably apply this operation to an LWP, and
+ * the LWP's ctl file descriptor might not be open.
+ */
+
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
+ return 0;
+ else
{
- if (poll_list[i].fd == pi->ctl_fd)
+#ifdef NEW_PROC_API
+ int cmd = PCSTOP;
+ win = (write (pi->ctl_fd, (char *) &cmd, sizeof (cmd)) == sizeof (cmd));
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCSTOP, &pi->prstatus) >= 0);
+ /* Note: the call also reads the prstatus. */
+ if (win)
{
- if (i != num_poll_list - 1)
- memcpy (poll_list + i, poll_list + i + 1,
- (num_poll_list - i - 1) * sizeof (struct pollfd));
-
- num_poll_list--;
-
- if (num_poll_list == 0)
- free (poll_list);
- else
- poll_list = (struct pollfd *) xrealloc (poll_list,
- num_poll_list
- * sizeof (struct pollfd));
- return;
+ pi->status_valid = 1;
+ PROC_PRETTYFPRINT_STATUS (proc_flags (pi),
+ proc_why (pi),
+ proc_what (pi),
+ proc_get_current_thread (pi));
}
+#endif
}
+
+ return win;
}
/*
-
-LOCAL FUNCTION
-
- procfs_read_status - get procfs fd status
-
-SYNOPSIS
-
- static int procfs_read_status (pi) struct procinfo *pi;
-
-DESCRIPTION
-
- Given a pointer to a procinfo struct, get the status of
- the status_fd in the appropriate way. Returns 0 on failure,
- 1 on success.
+ * Function: proc_wait_for_stop
+ *
+ * Wait for the process or LWP to stop (block until it does).
+ * Returns non-zero for success, zero for failure.
*/
-static int
-procfs_read_status (pi)
- struct procinfo *pi;
+int
+proc_wait_for_stop (pi)
+ procinfo *pi;
{
-#ifdef PROCFS_USE_READ_WRITE
- if ((lseek (pi->status_fd, 0, SEEK_SET) < 0) ||
- (read (pi->status_fd, (char *) &pi->prstatus,
- sizeof (gdb_prstatus_t)) != sizeof (gdb_prstatus_t)))
-#else
- if (ioctl (pi->status_fd, PIOCSTATUS, &pi->prstatus) < 0)
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+#ifdef NEW_PROC_API
+ {
+ int cmd = PCWSTOP;
+ win = (write (pi->ctl_fd, (char *) &cmd, sizeof (cmd)) == sizeof (cmd));
+ /* We been runnin' and we stopped -- need to update status. */
+ pi->status_valid = 0;
+ }
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCWSTOP, &pi->prstatus) >= 0);
+ /* Above call also refreshes the prstatus. */
+ if (win)
+ {
+ pi->status_valid = 1;
+ PROC_PRETTYFPRINT_STATUS (proc_flags (pi),
+ proc_why (pi),
+ proc_what (pi),
+ proc_get_current_thread (pi));
+ }
#endif
- return 0;
- else
- return 1;
+
+ return win;
}
/*
+ * Function: proc_run_process
+ *
+ * Make the process or LWP runnable.
+ * Options (not all are implemented):
+ * - single-step
+ * - clear current fault
+ * - clear current signal
+ * - abort the current system call
+ * - stop as soon as finished with system call
+ * - (ioctl): set traced signal set
+ * - (ioctl): set held signal set
+ * - (ioctl): set traced fault set
+ * - (ioctl): set start pc (vaddr)
+ * Always clear the current fault.
+ * Clear the current signal if 'signo' is zero.
+ *
+ * Arguments:
+ * pi the process or LWP to operate on.
+ * step if true, set the process or LWP to trap after one instr.
+ * signo if zero, clear the current signal if any.
+ * if non-zero, set the current signal to this one.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
-LOCAL FUNCTION
+int
+proc_run_process (pi, step, signo)
+ procinfo *pi;
+ int step;
+ int signo;
+{
+ int win;
+ int runflags;
- procfs_write_pcwstop - send a PCWSTOP to procfs fd
+ /*
+ * We will probably have to apply this operation to individual threads,
+ * so make sure the control file descriptor is open.
+ */
+
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
+ {
+ return 0;
+ }
-SYNOPSIS
+ runflags = PRCFAULT; /* always clear current fault */
+ if (step)
+ runflags |= PRSTEP;
+ if (signo == 0)
+ runflags |= PRCSIG;
+ else if (signo != -1) /* -1 means do nothing W.R.T. signals */
+ proc_set_current_signal (pi, signo);
- static int procfs_write_pcwstop (pi) struct procinfo *pi;
+#ifdef NEW_PROC_API
+ {
+ int cmd[2];
-DESCRIPTION
-
- Given a pointer to a procinfo struct, send a PCWSTOP to
- the ctl_fd in the appropriate way. Returns 0 on failure,
- 1 on success.
- */
+ cmd[0] = PCRUN;
+ cmd[1] = runflags;
+ win = (write (pi->ctl_fd, (char *) &cmd, sizeof (cmd)) == sizeof (cmd));
+ }
+#else /* ioctl method */
+ {
+ prrun_t prrun;
-static int
-procfs_write_pcwstop (pi)
- struct procinfo *pi;
-{
-#ifdef PROCFS_USE_READ_WRITE
- long cmd = PCWSTOP;
- if (write (pi->ctl_fd, (char *) &cmd, sizeof (long)) < 0)
-#else
- if (ioctl (pi->ctl_fd, PIOCWSTOP, &pi->prstatus) < 0)
+ memset (&prrun, 0, sizeof (prrun));
+ prrun.pr_flags = runflags;
+ win = (ioctl (pi->ctl_fd, PIOCRUN, &prrun) >= 0);
+ }
#endif
- return 0;
- else
- return 1;
+
+ return win;
}
/*
+ * Function: proc_set_traced_signals
+ *
+ * Register to trace signals in the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_traced_signals (pi, sigset)
+ procinfo *pi;
+ sigset_t *sigset;
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-LOCAL FUNCTION
+#ifdef NEW_PROC_API
+ {
+ struct {
+ int cmd;
+ /* Use char array to avoid alignment issues. */
+ char sigset[sizeof (sigset_t)];
+ } arg;
- procfs_write_pckill - send a kill to procfs fd
+ arg.cmd = PCSTRACE;
+ memcpy (&arg.sigset, sigset, sizeof (sigset_t));
-SYNOPSIS
+ win = (write (pi->ctl_fd, (char *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCSTRACE, sigset) >= 0);
+#endif
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
- static void procfs_write_pckill (pi) struct procinfo *pi;
+ if (!win)
+ warning ("procfs: set_traced_signals failed");
+ return win;
+}
-DESCRIPTION
-
- Given a pointer to a procinfo struct, send a kill to
- the ctl_fd in the appropriate way. Returns 0 on failure,
- 1 on success.
+/*
+ * Function: proc_set_traced_faults
+ *
+ * Register to trace hardware faults in the process or LWP.
+ * Returns non-zero for success, zero for failure.
*/
-static void
-procfs_write_pckill (pi)
- struct procinfo *pi;
+int
+proc_set_traced_faults (pi, fltset)
+ procinfo *pi;
+ fltset_t *fltset;
{
-#ifdef PROCFS_USE_READ_WRITE
- struct proc_ctl pctl;
- pctl.cmd = PCKILL;
- pctl.data = SIGKILL;
- write (pi->ctl_fd, &pctl, sizeof (struct proc_ctl));
-#else
- int signo = SIGKILL;
- ioctl (pi->ctl_fd, PIOCKILL, &signo);
-#endif
-}
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-static struct procinfo *
-wait_fd ()
-{
- struct procinfo *pi, *next_pi;
-#ifndef LOSING_POLL
- int num_fds;
- int i;
+#ifdef NEW_PROC_API
+ {
+ struct {
+ int cmd;
+ /* Use char array to avoid alignment issues. */
+ char fltset[sizeof (fltset_t)];
+ } arg;
+
+ arg.cmd = PCSFAULT;
+ memcpy (&arg.fltset, fltset, sizeof (fltset_t));
+
+ win = (write (pi->ctl_fd, (char *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCSFAULT, fltset) >= 0);
#endif
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
- set_sigint_trap (); /* Causes SIGINT to be passed on to the
- attached process. */
- set_sigio_trap ();
+ return win;
+}
- wait_again:
-#ifndef LOSING_POLL
- while (1)
- {
- num_fds = poll (poll_list, num_poll_list, -1);
- if (num_fds > 0)
- break;
- if (num_fds < 0 && errno == EINTR)
- continue;
- print_sys_errmsg ("poll failed", errno);
- error ("Poll failed, returned %d", num_fds);
- }
-#else /* LOSING_POLL */
- pi = current_procinfo;
+/*
+ * Function: proc_set_traced_sysentry
+ *
+ * Register to trace entry to system calls in the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
- while (!procfs_write_pcwstop (pi))
- {
- if (errno == ENOENT)
- {
- /* Process exited. */
- pi->prstatus.pr_flags = 0;
- break;
- }
- else if (errno != EINTR)
- {
- print_sys_errmsg (pi->pathname, errno);
- error ("procfs_write_pcwstop failed");
- }
- }
- pi->had_event = 1;
-#endif /* LOSING_POLL */
+int
+proc_set_traced_sysentry (pi, sysset)
+ procinfo *pi;
+ sysset_t *sysset;
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
- clear_sigint_trap ();
- clear_sigio_trap ();
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-#ifndef LOSING_POLL
+#ifdef NEW_PROC_API
+ {
+ struct {
+ int cmd;
+ /* Use char array to avoid alignment issues. */
+ char sysset[sizeof (sysset_t)];
+ } arg;
- for (i = 0; i < num_poll_list && num_fds > 0; i++)
- {
- if (0 == (poll_list[i].revents &
- (POLLWRNORM | POLLPRI | POLLERR | POLLHUP | POLLNVAL)))
- continue;
- for (pi = procinfo_list; pi; pi = next_pi)
- {
- next_pi = pi->next;
- if (poll_list[i].fd == pi->ctl_fd)
- {
- num_fds--;
- if ((poll_list[i].revents & POLLHUP) != 0 ||
- !procfs_read_status(pi))
- { /* The LWP has apparently terminated. */
- if (num_poll_list <= 1)
- {
- pi->prstatus.pr_flags = 0;
- pi->had_event = 1;
- break;
- }
- if (info_verbose)
- printf_filtered ("LWP %d exited.\n",
- (pi->pid >> 16) & 0xffff);
- close_proc_file (pi);
- i--; /* don't skip deleted entry */
- if (num_fds != 0)
- break; /* already another event to process */
- else
- goto wait_again; /* wait for another event */
- }
- pi->had_event = 1;
- break;
- }
- }
- if (!pi)
- error ("wait_fd: Couldn't find procinfo for fd %d\n",
- poll_list[i].fd);
- }
-#endif /* LOSING_POLL */
+ arg.cmd = PCSENTRY;
+ memcpy (&arg.sysset, sysset, sizeof (sysset_t));
- return pi;
+ win = (write (pi->ctl_fd, (char *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCSENTRY, sysset) >= 0);
+#endif
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
+
+ return win;
}
/*
+ * Function: proc_set_traced_sysexit
+ *
+ * Register to trace exit from system calls in the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_traced_sysexit (pi, sysset)
+ procinfo *pi;
+ sysset_t *sysset;
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-LOCAL FUNCTION
+#ifdef NEW_PROC_API
+ {
+ struct {
+ int cmd;
+ /* Use char array to avoid alignment issues. */
+ char sysset[sizeof (sysset_t)];
+ } arg;
- lookupdesc -- translate a value to a summary desc string
+ arg.cmd = PCSEXIT;
+ memcpy (&arg.sysset, sysset, sizeof (sysset_t));
-SYNOPSIS
+ win = (write (pi->ctl_fd, (char *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else /* ioctl method */
+ win = (ioctl (pi->ctl_fd, PIOCSEXIT, sysset) >= 0);
+#endif
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
- static char *lookupdesc (struct trans *transp, unsigned int val);
+ return win;
+}
-DESCRIPTION
-
- Given a pointer to a translation table and a value to be translated,
- lookup the desc string and return it.
+/*
+ * Function: proc_set_held_signals
+ *
+ * Specify the set of blocked / held signals in the process or LWP.
+ * Returns non-zero for success, zero for failure.
*/
-static char *
-lookupdesc (transp, val)
- struct trans *transp;
- unsigned int val;
+int
+proc_set_held_signals (pi, sighold)
+ procinfo *pi;
+ sigset_t *sighold;
{
- char *desc;
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
- for (desc = NULL; transp -> name != NULL; transp++)
- {
- if (transp -> value == val)
- {
- desc = transp -> desc;
- break;
- }
- }
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- /* Didn't find a translation for the specified value, set a default one. */
+#ifdef NEW_PROC_API
+ {
+ struct {
+ int cmd;
+ /* Use char array to avoid alignment issues. */
+ char hold[sizeof (sigset_t)];
+ } arg;
+
+ arg.cmd = PCSHOLD;
+ memcpy (&arg.hold, sighold, sizeof (sigset_t));
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else
+ win = (ioctl (pi->ctl_fd, PIOCSHOLD, sighold) >= 0);
+#endif
+ /* The above operation renders the procinfo's cached pstatus obsolete. */
+ pi->status_valid = 0;
- if (desc == NULL)
- {
- desc = "Unknown";
- }
- return (desc);
+ return win;
}
/*
+ * Function: proc_get_pending_signals
+ *
+ * returns the set of signals that are pending in the process or LWP.
+ * Will also copy the sigset if 'save' is non-zero.
+ */
-LOCAL FUNCTION
-
- lookupname -- translate a value to symbolic name
+sigset_t *
+proc_get_pending_signals (pi, save)
+ procinfo *pi;
+ sigset_t *save;
+{
+ sigset_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-SYNOPSIS
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
- static char *lookupname (struct trans *transp, unsigned int val,
- char *prefix);
+#ifdef NEW_PROC_API
+ ret = &pi->prstatus.pr_lwp.pr_lwppend;
+#else
+ ret = &pi->prstatus.pr_sigpend;
+#endif
+ if (save && ret)
+ memcpy (save, ret, sizeof (sigset_t));
-DESCRIPTION
-
- Given a pointer to a translation table, a value to be translated,
- and a default prefix to return if the value can't be translated,
- match the value with one of the translation table entries and
- return a pointer to the symbolic name.
+ return ret;
+}
- If no match is found it just returns the value as a printable string,
- with the given prefix. The previous such value, if any, is freed
- at this time.
+/*
+ * Function: proc_get_signal_actions
+ *
+ * returns the set of signal actions.
+ * Will also copy the sigactionset if 'save' is non-zero.
*/
-static char *
-lookupname (transp, val, prefix)
- struct trans *transp;
- unsigned int val;
- char *prefix;
+struct sigaction *
+proc_get_signal_actions (pi, save)
+ procinfo *pi;
+ struct sigaction *save;
{
- static char *locbuf;
- char *name;
+ struct sigaction *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
- for (name = NULL; transp -> name != NULL; transp++)
- {
- if (transp -> value == val)
- {
- name = transp -> name;
- break;
- }
- }
-
- /* Didn't find a translation for the specified value, build a default
- one using the specified prefix and return it. The lifetime of
- the value is only until the next one is needed. */
-
- if (name == NULL)
- {
- if (locbuf != NULL)
- {
- free (locbuf);
- }
- locbuf = xmalloc (strlen (prefix) + 16);
- sprintf (locbuf, "%s %u", prefix, val);
- name = locbuf;
- }
- return (name);
-}
-
-static char *
-sigcodename (sip)
- siginfo_t *sip;
-{
- struct sigcode *scp;
- char *name = NULL;
- static char locbuf[32];
-
- for (scp = siginfo_table; scp -> codename != NULL; scp++)
- {
- if ((scp -> signo == sip -> si_signo) &&
- (scp -> code == sip -> si_code))
- {
- name = scp -> codename;
- break;
- }
- }
- if (name == NULL)
- {
- sprintf (locbuf, "sigcode %u", sip -> si_signo);
- name = locbuf;
- }
- return (name);
-}
-
-static char *
-sigcodedesc (sip)
- siginfo_t *sip;
-{
- struct sigcode *scp;
- char *desc = NULL;
-
- for (scp = siginfo_table; scp -> codename != NULL; scp++)
- {
- if ((scp -> signo == sip -> si_signo) &&
- (scp -> code == sip -> si_code))
- {
- desc = scp -> desc;
- break;
- }
- }
- if (desc == NULL)
- {
- desc = "Unrecognized signal or trap use";
- }
- return (desc);
-}
-
-/*
-
-LOCAL FUNCTION
-
- syscallname - translate a system call number into a system call name
-
-SYNOPSIS
-
- char *syscallname (int syscallnum)
-
-DESCRIPTION
-
- Given a system call number, translate it into the printable name
- of a system call, or into "syscall <num>" if it is an unknown
- number.
- */
-
-static char *
-syscallname (syscallnum)
- int syscallnum;
-{
- static char locbuf[32];
-
- if (syscallnum >= 0 && syscallnum < MAX_SYSCALLS
- && syscall_table[syscallnum] != NULL)
- return syscall_table[syscallnum];
- else
- {
- sprintf (locbuf, "syscall %u", syscallnum);
- return locbuf;
- }
-}
-
-/*
-
-LOCAL FUNCTION
-
- init_syscall_table - initialize syscall translation table
-
-SYNOPSIS
-
- void init_syscall_table (void)
-
-DESCRIPTION
-
- Dynamically initialize the translation table to convert system
- call numbers into printable system call names. Done once per
- gdb run, on initialization.
-
-NOTES
-
- This is awfully ugly, but preprocessor tricks to make it prettier
- tend to be nonportable.
- */
-
-static void
-init_syscall_table ()
-{
-#if defined (SYS_exit)
- syscall_table[SYS_exit] = "exit";
-#endif
-#if defined (SYS_fork)
- syscall_table[SYS_fork] = "fork";
-#endif
-#if defined (SYS_read)
- syscall_table[SYS_read] = "read";
-#endif
-#if defined (SYS_write)
- syscall_table[SYS_write] = "write";
-#endif
-#if defined (SYS_open)
- syscall_table[SYS_open] = "open";
-#endif
-#if defined (SYS_close)
- syscall_table[SYS_close] = "close";
-#endif
-#if defined (SYS_wait)
- syscall_table[SYS_wait] = "wait";
-#endif
-#if defined (SYS_creat)
- syscall_table[SYS_creat] = "creat";
-#endif
-#if defined (SYS_link)
- syscall_table[SYS_link] = "link";
-#endif
-#if defined (SYS_unlink)
- syscall_table[SYS_unlink] = "unlink";
-#endif
-#if defined (SYS_exec)
- syscall_table[SYS_exec] = "exec";
-#endif
-#if defined (SYS_execv)
- syscall_table[SYS_execv] = "execv";
-#endif
-#if defined (SYS_execve)
- syscall_table[SYS_execve] = "execve";
-#endif
-#if defined (SYS_chdir)
- syscall_table[SYS_chdir] = "chdir";
-#endif
-#if defined (SYS_time)
- syscall_table[SYS_time] = "time";
-#endif
-#if defined (SYS_mknod)
- syscall_table[SYS_mknod] = "mknod";
-#endif
-#if defined (SYS_chmod)
- syscall_table[SYS_chmod] = "chmod";
-#endif
-#if defined (SYS_chown)
- syscall_table[SYS_chown] = "chown";
-#endif
-#if defined (SYS_brk)
- syscall_table[SYS_brk] = "brk";
-#endif
-#if defined (SYS_stat)
- syscall_table[SYS_stat] = "stat";
-#endif
-#if defined (SYS_lseek)
- syscall_table[SYS_lseek] = "lseek";
-#endif
-#if defined (SYS_getpid)
- syscall_table[SYS_getpid] = "getpid";
-#endif
-#if defined (SYS_mount)
- syscall_table[SYS_mount] = "mount";
-#endif
-#if defined (SYS_umount)
- syscall_table[SYS_umount] = "umount";
-#endif
-#if defined (SYS_setuid)
- syscall_table[SYS_setuid] = "setuid";
-#endif
-#if defined (SYS_getuid)
- syscall_table[SYS_getuid] = "getuid";
-#endif
-#if defined (SYS_stime)
- syscall_table[SYS_stime] = "stime";
-#endif
-#if defined (SYS_ptrace)
- syscall_table[SYS_ptrace] = "ptrace";
-#endif
-#if defined (SYS_alarm)
- syscall_table[SYS_alarm] = "alarm";
-#endif
-#if defined (SYS_fstat)
- syscall_table[SYS_fstat] = "fstat";
-#endif
-#if defined (SYS_pause)
- syscall_table[SYS_pause] = "pause";
-#endif
-#if defined (SYS_utime)
- syscall_table[SYS_utime] = "utime";
-#endif
-#if defined (SYS_stty)
- syscall_table[SYS_stty] = "stty";
-#endif
-#if defined (SYS_gtty)
- syscall_table[SYS_gtty] = "gtty";
-#endif
-#if defined (SYS_access)
- syscall_table[SYS_access] = "access";
-#endif
-#if defined (SYS_nice)
- syscall_table[SYS_nice] = "nice";
-#endif
-#if defined (SYS_statfs)
- syscall_table[SYS_statfs] = "statfs";
-#endif
-#if defined (SYS_sync)
- syscall_table[SYS_sync] = "sync";
-#endif
-#if defined (SYS_kill)
- syscall_table[SYS_kill] = "kill";
-#endif
-#if defined (SYS_fstatfs)
- syscall_table[SYS_fstatfs] = "fstatfs";
-#endif
-#if defined (SYS_pgrpsys)
- syscall_table[SYS_pgrpsys] = "pgrpsys";
-#endif
-#if defined (SYS_xenix)
- syscall_table[SYS_xenix] = "xenix";
-#endif
-#if defined (SYS_dup)
- syscall_table[SYS_dup] = "dup";
-#endif
-#if defined (SYS_pipe)
- syscall_table[SYS_pipe] = "pipe";
-#endif
-#if defined (SYS_times)
- syscall_table[SYS_times] = "times";
-#endif
-#if defined (SYS_profil)
- syscall_table[SYS_profil] = "profil";
-#endif
-#if defined (SYS_plock)
- syscall_table[SYS_plock] = "plock";
-#endif
-#if defined (SYS_setgid)
- syscall_table[SYS_setgid] = "setgid";
-#endif
-#if defined (SYS_getgid)
- syscall_table[SYS_getgid] = "getgid";
-#endif
-#if defined (SYS_signal)
- syscall_table[SYS_signal] = "signal";
-#endif
-#if defined (SYS_msgsys)
- syscall_table[SYS_msgsys] = "msgsys";
-#endif
-#if defined (SYS_sys3b)
- syscall_table[SYS_sys3b] = "sys3b";
-#endif
-#if defined (SYS_sysi86)
- syscall_table[SYS_sysi86] = "sysi86";
-#endif
-#if defined (SYS_acct)
- syscall_table[SYS_acct] = "acct";
-#endif
-#if defined (SYS_shmsys)
- syscall_table[SYS_shmsys] = "shmsys";
-#endif
-#if defined (SYS_semsys)
- syscall_table[SYS_semsys] = "semsys";
-#endif
-#if defined (SYS_ioctl)
- syscall_table[SYS_ioctl] = "ioctl";
-#endif
-#if defined (SYS_uadmin)
- syscall_table[SYS_uadmin] = "uadmin";
-#endif
-#if defined (SYS_utssys)
- syscall_table[SYS_utssys] = "utssys";
-#endif
-#if defined (SYS_fsync)
- syscall_table[SYS_fsync] = "fsync";
-#endif
-#if defined (SYS_umask)
- syscall_table[SYS_umask] = "umask";
-#endif
-#if defined (SYS_chroot)
- syscall_table[SYS_chroot] = "chroot";
-#endif
-#if defined (SYS_fcntl)
- syscall_table[SYS_fcntl] = "fcntl";
-#endif
-#if defined (SYS_ulimit)
- syscall_table[SYS_ulimit] = "ulimit";
-#endif
-#if defined (SYS_rfsys)
- syscall_table[SYS_rfsys] = "rfsys";
-#endif
-#if defined (SYS_rmdir)
- syscall_table[SYS_rmdir] = "rmdir";
-#endif
-#if defined (SYS_mkdir)
- syscall_table[SYS_mkdir] = "mkdir";
-#endif
-#if defined (SYS_getdents)
- syscall_table[SYS_getdents] = "getdents";
-#endif
-#if defined (SYS_sysfs)
- syscall_table[SYS_sysfs] = "sysfs";
-#endif
-#if defined (SYS_getmsg)
- syscall_table[SYS_getmsg] = "getmsg";
-#endif
-#if defined (SYS_putmsg)
- syscall_table[SYS_putmsg] = "putmsg";
-#endif
-#if defined (SYS_poll)
- syscall_table[SYS_poll] = "poll";
-#endif
-#if defined (SYS_lstat)
- syscall_table[SYS_lstat] = "lstat";
-#endif
-#if defined (SYS_symlink)
- syscall_table[SYS_symlink] = "symlink";
-#endif
-#if defined (SYS_readlink)
- syscall_table[SYS_readlink] = "readlink";
-#endif
-#if defined (SYS_setgroups)
- syscall_table[SYS_setgroups] = "setgroups";
-#endif
-#if defined (SYS_getgroups)
- syscall_table[SYS_getgroups] = "getgroups";
-#endif
-#if defined (SYS_fchmod)
- syscall_table[SYS_fchmod] = "fchmod";
-#endif
-#if defined (SYS_fchown)
- syscall_table[SYS_fchown] = "fchown";
-#endif
-#if defined (SYS_sigprocmask)
- syscall_table[SYS_sigprocmask] = "sigprocmask";
-#endif
-#if defined (SYS_sigsuspend)
- syscall_table[SYS_sigsuspend] = "sigsuspend";
-#endif
-#if defined (SYS_sigaltstack)
- syscall_table[SYS_sigaltstack] = "sigaltstack";
-#endif
-#if defined (SYS_sigaction)
- syscall_table[SYS_sigaction] = "sigaction";
-#endif
-#if defined (SYS_sigpending)
- syscall_table[SYS_sigpending] = "sigpending";
-#endif
-#if defined (SYS_context)
- syscall_table[SYS_context] = "context";
-#endif
-#if defined (SYS_evsys)
- syscall_table[SYS_evsys] = "evsys";
-#endif
-#if defined (SYS_evtrapret)
- syscall_table[SYS_evtrapret] = "evtrapret";
-#endif
-#if defined (SYS_statvfs)
- syscall_table[SYS_statvfs] = "statvfs";
-#endif
-#if defined (SYS_fstatvfs)
- syscall_table[SYS_fstatvfs] = "fstatvfs";
-#endif
-#if defined (SYS_nfssys)
- syscall_table[SYS_nfssys] = "nfssys";
-#endif
-#if defined (SYS_waitsys)
- syscall_table[SYS_waitsys] = "waitsys";
-#endif
-#if defined (SYS_sigsendsys)
- syscall_table[SYS_sigsendsys] = "sigsendsys";
-#endif
-#if defined (SYS_hrtsys)
- syscall_table[SYS_hrtsys] = "hrtsys";
-#endif
-#if defined (SYS_acancel)
- syscall_table[SYS_acancel] = "acancel";
-#endif
-#if defined (SYS_async)
- syscall_table[SYS_async] = "async";
-#endif
-#if defined (SYS_priocntlsys)
- syscall_table[SYS_priocntlsys] = "priocntlsys";
-#endif
-#if defined (SYS_pathconf)
- syscall_table[SYS_pathconf] = "pathconf";
-#endif
-#if defined (SYS_mincore)
- syscall_table[SYS_mincore] = "mincore";
-#endif
-#if defined (SYS_mmap)
- syscall_table[SYS_mmap] = "mmap";
-#endif
-#if defined (SYS_mprotect)
- syscall_table[SYS_mprotect] = "mprotect";
-#endif
-#if defined (SYS_munmap)
- syscall_table[SYS_munmap] = "munmap";
-#endif
-#if defined (SYS_fpathconf)
- syscall_table[SYS_fpathconf] = "fpathconf";
-#endif
-#if defined (SYS_vfork)
- syscall_table[SYS_vfork] = "vfork";
-#endif
-#if defined (SYS_fchdir)
- syscall_table[SYS_fchdir] = "fchdir";
-#endif
-#if defined (SYS_readv)
- syscall_table[SYS_readv] = "readv";
-#endif
-#if defined (SYS_writev)
- syscall_table[SYS_writev] = "writev";
-#endif
-#if defined (SYS_xstat)
- syscall_table[SYS_xstat] = "xstat";
-#endif
-#if defined (SYS_lxstat)
- syscall_table[SYS_lxstat] = "lxstat";
-#endif
-#if defined (SYS_fxstat)
- syscall_table[SYS_fxstat] = "fxstat";
-#endif
-#if defined (SYS_xmknod)
- syscall_table[SYS_xmknod] = "xmknod";
-#endif
-#if defined (SYS_clocal)
- syscall_table[SYS_clocal] = "clocal";
-#endif
-#if defined (SYS_setrlimit)
- syscall_table[SYS_setrlimit] = "setrlimit";
-#endif
-#if defined (SYS_getrlimit)
- syscall_table[SYS_getrlimit] = "getrlimit";
-#endif
-#if defined (SYS_lchown)
- syscall_table[SYS_lchown] = "lchown";
-#endif
-#if defined (SYS_memcntl)
- syscall_table[SYS_memcntl] = "memcntl";
-#endif
-#if defined (SYS_getpmsg)
- syscall_table[SYS_getpmsg] = "getpmsg";
-#endif
-#if defined (SYS_putpmsg)
- syscall_table[SYS_putpmsg] = "putpmsg";
-#endif
-#if defined (SYS_rename)
- syscall_table[SYS_rename] = "rename";
-#endif
-#if defined (SYS_uname)
- syscall_table[SYS_uname] = "uname";
-#endif
-#if defined (SYS_setegid)
- syscall_table[SYS_setegid] = "setegid";
-#endif
-#if defined (SYS_sysconfig)
- syscall_table[SYS_sysconfig] = "sysconfig";
-#endif
-#if defined (SYS_adjtime)
- syscall_table[SYS_adjtime] = "adjtime";
-#endif
-#if defined (SYS_systeminfo)
- syscall_table[SYS_systeminfo] = "systeminfo";
-#endif
-#if defined (SYS_seteuid)
- syscall_table[SYS_seteuid] = "seteuid";
-#endif
-#if defined (SYS_sproc)
- syscall_table[SYS_sproc] = "sproc";
-#endif
-#if defined (SYS_keyctl)
- syscall_table[SYS_keyctl] = "keyctl";
-#endif
-#if defined (SYS_secsys)
- syscall_table[SYS_secsys] = "secsys";
-#endif
-#if defined (SYS_filepriv)
- syscall_table[SYS_filepriv] = "filepriv";
-#endif
-#if defined (SYS_procpriv)
- syscall_table[SYS_procpriv] = "procpriv";
-#endif
-#if defined (SYS_devstat)
- syscall_table[SYS_devstat] = "devstat";
-#endif
-#if defined (SYS_aclipc)
- syscall_table[SYS_aclipc] = "aclipc";
-#endif
-#if defined (SYS_fdevstat)
- syscall_table[SYS_fdevstat] = "fdevstat";
-#endif
-#if defined (SYS_flvlfile)
- syscall_table[SYS_flvlfile] = "flvlfile";
-#endif
-#if defined (SYS_lvlfile)
- syscall_table[SYS_lvlfile] = "lvlfile";
-#endif
-#if defined (SYS_lvlequal)
- syscall_table[SYS_lvlequal] = "lvlequal";
-#endif
-#if defined (SYS_lvlproc)
- syscall_table[SYS_lvlproc] = "lvlproc";
-#endif
-#if defined (SYS_lvlipc)
- syscall_table[SYS_lvlipc] = "lvlipc";
-#endif
-#if defined (SYS_acl)
- syscall_table[SYS_acl] = "acl";
-#endif
-#if defined (SYS_auditevt)
- syscall_table[SYS_auditevt] = "auditevt";
-#endif
-#if defined (SYS_auditctl)
- syscall_table[SYS_auditctl] = "auditctl";
-#endif
-#if defined (SYS_auditdmp)
- syscall_table[SYS_auditdmp] = "auditdmp";
-#endif
-#if defined (SYS_auditlog)
- syscall_table[SYS_auditlog] = "auditlog";
-#endif
-#if defined (SYS_auditbuf)
- syscall_table[SYS_auditbuf] = "auditbuf";
-#endif
-#if defined (SYS_lvldom)
- syscall_table[SYS_lvldom] = "lvldom";
-#endif
-#if defined (SYS_lvlvfs)
- syscall_table[SYS_lvlvfs] = "lvlvfs";
-#endif
-#if defined (SYS_mkmld)
- syscall_table[SYS_mkmld] = "mkmld";
-#endif
-#if defined (SYS_mldmode)
- syscall_table[SYS_mldmode] = "mldmode";
-#endif
-#if defined (SYS_secadvise)
- syscall_table[SYS_secadvise] = "secadvise";
-#endif
-#if defined (SYS_online)
- syscall_table[SYS_online] = "online";
-#endif
-#if defined (SYS_setitimer)
- syscall_table[SYS_setitimer] = "setitimer";
-#endif
-#if defined (SYS_getitimer)
- syscall_table[SYS_getitimer] = "getitimer";
-#endif
-#if defined (SYS_gettimeofday)
- syscall_table[SYS_gettimeofday] = "gettimeofday";
-#endif
-#if defined (SYS_settimeofday)
- syscall_table[SYS_settimeofday] = "settimeofday";
-#endif
-#if defined (SYS_lwp_create)
- syscall_table[SYS_lwp_create] = "_lwp_create";
-#endif
-#if defined (SYS_lwp_exit)
- syscall_table[SYS_lwp_exit] = "_lwp_exit";
-#endif
-#if defined (SYS_lwp_wait)
- syscall_table[SYS_lwp_wait] = "_lwp_wait";
-#endif
-#if defined (SYS_lwp_self)
- syscall_table[SYS_lwp_self] = "_lwp_self";
-#endif
-#if defined (SYS_lwp_info)
- syscall_table[SYS_lwp_info] = "_lwp_info";
-#endif
-#if defined (SYS_lwp_private)
- syscall_table[SYS_lwp_private] = "_lwp_private";
-#endif
-#if defined (SYS_processor_bind)
- syscall_table[SYS_processor_bind] = "processor_bind";
-#endif
-#if defined (SYS_processor_exbind)
- syscall_table[SYS_processor_exbind] = "processor_exbind";
-#endif
-#if defined (SYS_prepblock)
- syscall_table[SYS_prepblock] = "prepblock";
-#endif
-#if defined (SYS_block)
- syscall_table[SYS_block] = "block";
-#endif
-#if defined (SYS_rdblock)
- syscall_table[SYS_rdblock] = "rdblock";
-#endif
-#if defined (SYS_unblock)
- syscall_table[SYS_unblock] = "unblock";
-#endif
-#if defined (SYS_cancelblock)
- syscall_table[SYS_cancelblock] = "cancelblock";
-#endif
-#if defined (SYS_pread)
- syscall_table[SYS_pread] = "pread";
-#endif
-#if defined (SYS_pwrite)
- syscall_table[SYS_pwrite] = "pwrite";
-#endif
-#if defined (SYS_truncate)
- syscall_table[SYS_truncate] = "truncate";
-#endif
-#if defined (SYS_ftruncate)
- syscall_table[SYS_ftruncate] = "ftruncate";
-#endif
-#if defined (SYS_lwp_kill)
- syscall_table[SYS_lwp_kill] = "_lwp_kill";
-#endif
-#if defined (SYS_sigwait)
- syscall_table[SYS_sigwait] = "sigwait";
-#endif
-#if defined (SYS_fork1)
- syscall_table[SYS_fork1] = "fork1";
-#endif
-#if defined (SYS_forkall)
- syscall_table[SYS_forkall] = "forkall";
-#endif
-#if defined (SYS_modload)
- syscall_table[SYS_modload] = "modload";
-#endif
-#if defined (SYS_moduload)
- syscall_table[SYS_moduload] = "moduload";
-#endif
-#if defined (SYS_modpath)
- syscall_table[SYS_modpath] = "modpath";
-#endif
-#if defined (SYS_modstat)
- syscall_table[SYS_modstat] = "modstat";
-#endif
-#if defined (SYS_modadm)
- syscall_table[SYS_modadm] = "modadm";
-#endif
-#if defined (SYS_getksym)
- syscall_table[SYS_getksym] = "getksym";
-#endif
-#if defined (SYS_lwp_suspend)
- syscall_table[SYS_lwp_suspend] = "_lwp_suspend";
-#endif
-#if defined (SYS_lwp_continue)
- syscall_table[SYS_lwp_continue] = "_lwp_continue";
-#endif
-#if defined (SYS_priocntllst)
- syscall_table[SYS_priocntllst] = "priocntllst";
-#endif
-#if defined (SYS_sleep)
- syscall_table[SYS_sleep] = "sleep";
-#endif
-#if defined (SYS_lwp_sema_wait)
- syscall_table[SYS_lwp_sema_wait] = "_lwp_sema_wait";
-#endif
-#if defined (SYS_lwp_sema_post)
- syscall_table[SYS_lwp_sema_post] = "_lwp_sema_post";
-#endif
-#if defined (SYS_lwp_sema_trywait)
- syscall_table[SYS_lwp_sema_trywait] = "lwp_sema_trywait";
-#endif
-#if defined(SYS_fstatvfs64)
- syscall_table[SYS_fstatvfs64] = "fstatvfs64";
-#endif
-#if defined(SYS_statvfs64)
- syscall_table[SYS_statvfs64] = "statvfs64";
-#endif
-#if defined(SYS_ftruncate64)
- syscall_table[SYS_ftruncate64] = "ftruncate64";
-#endif
-#if defined(SYS_truncate64)
- syscall_table[SYS_truncate64] = "truncate64";
-#endif
-#if defined(SYS_getrlimit64)
- syscall_table[SYS_getrlimit64] = "getrlimit64";
-#endif
-#if defined(SYS_setrlimit64)
- syscall_table[SYS_setrlimit64] = "setrlimit64";
-#endif
-#if defined(SYS_lseek64)
- syscall_table[SYS_lseek64] = "lseek64";
-#endif
-#if defined(SYS_mmap64)
- syscall_table[SYS_mmap64] = "mmap64";
-#endif
-#if defined(SYS_pread64)
- syscall_table[SYS_pread64] = "pread64";
-#endif
-#if defined(SYS_creat64)
- syscall_table[SYS_creat64] = "creat64";
-#endif
-#if defined(SYS_dshmsys)
- syscall_table[SYS_dshmsys] = "dshmsys";
-#endif
-#if defined(SYS_invlpg)
- syscall_table[SYS_invlpg] = "invlpg";
-#endif
-#if defined(SYS_cg_ids)
- syscall_table[SYS_cg_ids] = "cg_ids";
-#endif
-#if defined(SYS_cg_processors)
- syscall_table[SYS_cg_processors] = "cg_processors";
-#endif
-#if defined(SYS_cg_info)
- syscall_table[SYS_cg_info] = "cg_info";
-#endif
-#if defined(SYS_cg_bind)
- syscall_table[SYS_cg_bind] = "cg_bind";
-#endif
-#if defined(SYS_cg_current)
- syscall_table[SYS_cg_current] = "cg_current";
-#endif
-#if defined(SYS_cg_memloc)
- syscall_table[SYS_cg_memloc] = "cg_memloc";
-#endif
-}
-
-/*
-
-LOCAL FUNCTION
-
- procfs_kill_inferior - kill any currently inferior
-
-SYNOPSIS
-
- void procfs_kill_inferior (void)
-
-DESCRIPTION
-
- Kill any current inferior.
-
-NOTES
-
- Kills even attached inferiors. Presumably the user has already
- been prompted that the inferior is an attached one rather than
- one started by gdb. (FIXME?)
-
-*/
-
-static void
-procfs_kill_inferior ()
-{
- target_mourn_inferior ();
-}
-
-/*
-
-LOCAL FUNCTION
-
- unconditionally_kill_inferior - terminate the inferior
-
-SYNOPSIS
-
- static void unconditionally_kill_inferior (struct procinfo *)
-
-DESCRIPTION
-
- Kill the specified inferior.
-
-NOTE
-
- A possibly useful enhancement would be to first try sending
- the inferior a terminate signal, politely asking it to commit
- suicide, before we murder it (we could call that
- politely_kill_inferior()).
-
-*/
-
-static void
-unconditionally_kill_inferior (pi)
- struct procinfo *pi;
-{
- int ppid;
- struct proc_ctl pctl;
-
- ppid = pi->prstatus.pr_ppid;
-
-#ifdef PROCFS_NEED_CLEAR_CURSIG_FOR_KILL
- /* Alpha OSF/1-3.x procfs needs a clear of the current signal
- before the PIOCKILL, otherwise it might generate a corrupted core
- file for the inferior. */
- ioctl (pi->ctl_fd, PIOCSSIG, NULL);
-#endif
-#ifdef PROCFS_NEED_PIOCSSIG_FOR_KILL
- /* Alpha OSF/1-2.x procfs needs a PIOCSSIG call with a SIGKILL signal
- to kill the inferior, otherwise it might remain stopped with a
- pending SIGKILL.
- We do not check the result of the PIOCSSIG, the inferior might have
- died already. */
- {
- struct siginfo newsiginfo;
-
- memset ((char *) &newsiginfo, 0, sizeof (newsiginfo));
- newsiginfo.si_signo = SIGKILL;
- newsiginfo.si_code = 0;
- newsiginfo.si_errno = 0;
- newsiginfo.si_pid = getpid ();
- newsiginfo.si_uid = getuid ();
- ioctl (pi->ctl_fd, PIOCSSIG, &newsiginfo);
- }
-#else /* PROCFS_NEED_PIOCSSIG_FOR_KILL */
- procfs_write_pckill (pi);
-#endif /* PROCFS_NEED_PIOCSSIG_FOR_KILL */
-
- close_proc_file (pi);
-
-/* Only wait() for our direct children. Our grandchildren zombies are killed
- by the death of their parents. */
-
- if (ppid == getpid())
- wait ((int *) 0);
-}
-
-/*
-
-LOCAL FUNCTION
-
- procfs_xfer_memory -- copy data to or from inferior memory space
-
-SYNOPSIS
-
- int procfs_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
- int dowrite, struct target_ops target)
-
-DESCRIPTION
-
- Copy LEN bytes to/from inferior's memory starting at MEMADDR
- from/to debugger memory starting at MYADDR. Copy from inferior
- if DOWRITE is zero or to inferior if DOWRITE is nonzero.
-
- Returns the length copied, which is either the LEN argument or
- zero. This xfer function does not do partial moves, since procfs_ops
- doesn't allow memory operations to cross below us in the target stack
- anyway.
-
-NOTES
-
- The /proc interface makes this an almost trivial task.
- */
-
-static int
-procfs_xfer_memory (memaddr, myaddr, len, dowrite, target)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
- int dowrite;
- struct target_ops *target; /* ignored */
-{
- int nbytes = 0;
- struct procinfo *pi;
-
- pi = current_procinfo;
-
- if (lseek(pi->as_fd, (off_t) memaddr, SEEK_SET) == (off_t) memaddr)
- {
- if (dowrite)
- {
- nbytes = write (pi->as_fd, myaddr, len);
- }
- else
- {
- nbytes = read (pi->as_fd, myaddr, len);
- }
- if (nbytes < 0)
- {
- nbytes = 0;
- }
- }
- return (nbytes);
-}
-
-/*
-
-LOCAL FUNCTION
-
- procfs_store_registers -- copy register values back to inferior
-
-SYNOPSIS
-
- void procfs_store_registers (int regno)
-
-DESCRIPTION
-
- Store our current register values back into the inferior. If
- REGNO is -1 then store all the register, otherwise store just
- the value specified by REGNO.
-
-NOTES
-
- If we are storing only a single register, we first have to get all
- the current values from the process, overwrite the desired register
- in the gregset with the one we want from gdb's registers, and then
- send the whole set back to the process. For writing all the
- registers, all we have to do is generate the gregset and send it to
- the process.
-
- Also note that the process has to be stopped on an event of interest
- for this to work, which basically means that it has to have been
- run under the control of one of the other /proc ioctl calls and not
- ptrace. Since we don't use ptrace anyway, we don't worry about this
- fine point, but it is worth noting for future reference.
-
- Gdb is confused about what this function is supposed to return.
- Some versions return a value, others return nothing. Some are
- declared to return a value and actually return nothing. Gdb ignores
- anything returned. (FIXME)
-
- */
-
-static void
-procfs_store_registers (regno)
- int regno;
-{
- struct procinfo *pi;
-#ifdef PROCFS_USE_READ_WRITE
- struct greg_ctl greg;
- struct fpreg_ctl fpreg;
-#endif
-
- pi = current_procinfo;
-
-#ifdef PROCFS_USE_READ_WRITE
- if (regno != -1)
- {
- procfs_read_status (pi);
- memcpy ((char *) &greg.gregset,
- (char *) &pi->prstatus.pr_lwp.pr_context.uc_mcontext.gregs,
- sizeof (gdb_gregset_t));
- }
- fill_gregset (&greg.gregset, regno);
- greg.cmd = PCSREG;
- write (pi->ctl_fd, &greg, sizeof (greg));
-#else /* PROCFS_USE_READ_WRITE */
- if (regno != -1)
- {
- ioctl (pi->ctl_fd, PIOCGREG, &pi->gregset.gregset);
- }
- fill_gregset (&pi->gregset.gregset, regno);
- ioctl (pi->ctl_fd, PIOCSREG, &pi->gregset.gregset);
-#endif /* PROCFS_USE_READ_WRITE */
-
-#if defined (FP0_REGNUM)
-
- /* Now repeat everything using the floating point register set, if the
- target has floating point hardware. Since we ignore the returned value,
- we'll never know whether it worked or not anyway. */
-
-#ifdef PROCFS_USE_READ_WRITE
- if (regno != -1)
- {
- procfs_read_status (pi);
- memcpy ((char *) &fpreg.fpregset,
- (char *) &pi->prstatus.pr_lwp.pr_context.uc_mcontext.fpregs,
- sizeof (gdb_fpregset_t));
- }
- fill_fpregset (&fpreg.fpregset, regno);
- fpreg.cmd = PCSFPREG;
- write (pi->ctl_fd, &fpreg, sizeof (fpreg));
-#else /* PROCFS_USE_READ_WRITE */
- if (regno != -1)
- {
- ioctl (pi->ctl_fd, PIOCGFPREG, &pi->fpregset.fpregset);
- }
- fill_fpregset (&pi->fpregset.fpregset, regno);
- ioctl (pi->ctl_fd, PIOCSFPREG, &pi->fpregset.fpregset);
-#endif /* PROCFS_USE_READ_WRITE */
-
-#endif /* FP0_REGNUM */
-
-}
-
-/*
-
-LOCAL FUNCTION
-
- init_procinfo - setup a procinfo struct and connect it to a process
-
-SYNOPSIS
-
- struct procinfo * init_procinfo (int pid)
-
-DESCRIPTION
-
- Allocate a procinfo structure, open the /proc file and then set up the
- set of signals and faults that are to be traced. Returns a pointer to
- the new procinfo structure.
-
-NOTES
-
- If proc_init_failed ever gets called, control returns to the command
- processing loop via the standard error handling code.
-
- */
-
-static struct procinfo *
-init_procinfo (pid, kill)
- int pid;
- int kill;
-{
- struct procinfo *pi = (struct procinfo *)
- xmalloc (sizeof (struct procinfo));
- struct sig_ctl sctl;
- struct flt_ctl fctl;
-
- memset ((char *) pi, 0, sizeof (*pi));
- if (!open_proc_file (pid, pi, O_RDWR, 1))
- proc_init_failed (pi, "can't open process file", kill);
-
- /* open_proc_file may modify pid. */
-
- pid = pi -> pid;
-
- /* Add new process to process info list */
-
- pi->next = procinfo_list;
- procinfo_list = pi;
-
- add_fd (pi); /* Add to list for poll/select */
-
- /* Remember some things about the inferior that we will, or might, change
- so that we can restore them when we detach. */
-#ifdef UNIXWARE
- memcpy ((char *) &pi->saved_trace.sigset,
- (char *) &pi->prstatus.pr_sigtrace, sizeof (sigset_t));
- memcpy ((char *) &pi->saved_fltset.fltset,
- (char *) &pi->prstatus.pr_flttrace, sizeof (fltset_t));
- memcpy ((char *) &pi->saved_entryset.sysset,
- (char *) &pi->prstatus.pr_sysentry, sizeof (sysset_t));
- memcpy ((char *) &pi->saved_exitset.sysset,
- (char *) &pi->prstatus.pr_sysexit, sizeof (sysset_t));
-
- /* Set up trace and fault sets, as gdb expects them. */
-
- prfillset (&sctl.sigset);
- notice_signals (pi, &sctl);
- prfillset (&fctl.fltset);
- prdelset (&fctl.fltset, FLTPAGE);
-
-#else /* ! UNIXWARE */
- ioctl (pi->ctl_fd, PIOCGTRACE, &pi->saved_trace.sigset);
- ioctl (pi->ctl_fd, PIOCGHOLD, &pi->saved_sighold.sigset);
- ioctl (pi->ctl_fd, PIOCGFAULT, &pi->saved_fltset.fltset);
- ioctl (pi->ctl_fd, PIOCGENTRY, &pi->saved_entryset.sysset);
- ioctl (pi->ctl_fd, PIOCGEXIT, &pi->saved_exitset.sysset);
-
- /* Set up trace and fault sets, as gdb expects them. */
-
- memset ((char *) &pi->prrun, 0, sizeof (pi->prrun));
- prfillset (&pi->prrun.pr_trace);
- procfs_notice_signals (pid);
- prfillset (&pi->prrun.pr_fault);
- prdelset (&pi->prrun.pr_fault, FLTPAGE);
-#ifdef PROCFS_DONT_TRACE_FAULTS
- premptyset (&pi->prrun.pr_fault);
-#endif
-#endif /* UNIXWARE */
-
- if (!procfs_read_status (pi))
- proc_init_failed (pi, "procfs_read_status failed", kill);
-
- return pi;
-}
-
-/*
-
-LOCAL FUNCTION
-
- create_procinfo - initialize access to a /proc entry
-
-SYNOPSIS
-
- struct procinfo * create_procinfo (int pid)
-
-DESCRIPTION
-
- Allocate a procinfo structure, open the /proc file and then set up the
- set of signals and faults that are to be traced. Returns a pointer to
- the new procinfo structure.
-
-NOTES
-
- If proc_init_failed ever gets called, control returns to the command
- processing loop via the standard error handling code.
-
- */
-
-static struct procinfo *
-create_procinfo (pid)
- int pid;
-{
- struct procinfo *pi;
- struct sig_ctl sctl;
- struct flt_ctl fctl;
-
- pi = find_procinfo (pid, 1);
- if (pi != NULL)
- return pi; /* All done! It already exists */
-
- pi = init_procinfo (pid, 1);
-
-#ifndef UNIXWARE
-/* A bug in Solaris (2.5 at least) causes PIOCWSTOP to hang on LWPs that are
- already stopped, even if they all have PR_ASYNC set. */
- if (!(pi->prstatus.pr_flags & PR_STOPPED))
-#endif
- if (!procfs_write_pcwstop (pi))
- proc_init_failed (pi, "procfs_write_pcwstop failed", 1);
-
-#ifdef PROCFS_USE_READ_WRITE
- fctl.cmd = PCSFAULT;
- if (write (pi->ctl_fd, (char *) &fctl, sizeof (struct flt_ctl)) < 0)
- proc_init_failed (pi, "PCSFAULT failed", 1);
-#else
- if (ioctl (pi->ctl_fd, PIOCSFAULT, &pi->prrun.pr_fault) < 0)
- proc_init_failed (pi, "PIOCSFAULT failed", 1);
-#endif
-
- return pi;
-}
-
-/*
-
-LOCAL FUNCTION
-
- procfs_exit_handler - handle entry into the _exit syscall
-
-SYNOPSIS
-
- int procfs_exit_handler (pi, syscall_num, why, rtnvalp, statvalp)
-
-DESCRIPTION
-
- This routine is called when an inferior process enters the _exit()
- system call. It continues the process, and then collects the exit
- status and pid which are returned in *statvalp and *rtnvalp. After
- that it returns non-zero to indicate that procfs_wait should wake up.
-
-NOTES
- There is probably a better way to do this.
-
- */
-
-static int
-procfs_exit_handler (pi, syscall_num, why, rtnvalp, statvalp)
- struct procinfo *pi;
- int syscall_num;
- int why;
- int *rtnvalp;
- int *statvalp;
-{
- struct procinfo *temp_pi, *next_pi;
- struct proc_ctl pctl;
-
-#ifdef UNIXWARE
- pctl.cmd = PCRUN;
- pctl.data = PRCFAULT;
-#else
- pi->prrun.pr_flags = PRCFAULT;
-#endif
-
-#ifdef PROCFS_USE_READ_WRITE
- if (write (pi->ctl_fd, (char *)&pctl, sizeof (struct proc_ctl)) < 0)
-#else
- if (ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
-#endif
- perror_with_name (pi->pathname);
-
- if (attach_flag)
- {
- /* Claim it exited (don't call wait). */
- if (info_verbose)
- printf_filtered ("(attached process has exited)\n");
- *statvalp = 0;
- *rtnvalp = inferior_pid;
- }
- else
- {
- *rtnvalp = wait (statvalp);
- if (*rtnvalp >= 0)
- *rtnvalp = pi->pid;
- }
-
- /* Close ALL open proc file handles,
- except the one that called SYS_exit. */
- for (temp_pi = procinfo_list; temp_pi; temp_pi = next_pi)
- {
- next_pi = temp_pi->next;
- if (temp_pi == pi)
- continue; /* Handled below */
- close_proc_file (temp_pi);
- }
- return 1;
-}
-
-/*
-
-LOCAL FUNCTION
-
- procfs_exec_handler - handle exit from the exec family of syscalls
-
-SYNOPSIS
-
- int procfs_exec_handler (pi, syscall_num, why, rtnvalp, statvalp)
-
-DESCRIPTION
-
- This routine is called when an inferior process is about to finish any
- of the exec() family of system calls. It pretends that we got a
- SIGTRAP (for compatibility with ptrace behavior), and returns non-zero
- to tell procfs_wait to wake up.
-
-NOTES
- This need for compatibility with ptrace is questionable. In the
- future, it shouldn't be necessary.
-
- */
-
-static int
-procfs_exec_handler (pi, syscall_num, why, rtnvalp, statvalp)
- struct procinfo *pi;
- int syscall_num;
- int why;
- int *rtnvalp;
- int *statvalp;
-{
- *statvalp = (SIGTRAP << 8) | 0177;
-
- return 1;
-}
-
-#if defined(SYS_sproc) && !defined(UNIXWARE)
-/* IRIX lwp creation system call */
-
-/*
-
-LOCAL FUNCTION
-
- procfs_sproc_handler - handle exit from the sproc syscall
-
-SYNOPSIS
-
- int procfs_sproc_handler (pi, syscall_num, why, rtnvalp, statvalp)
-
-DESCRIPTION
-
- This routine is called when an inferior process is about to finish an
- sproc() system call. This is the system call that IRIX uses to create
- a lightweight process. When the target process gets this event, we can
- look at rval1 to find the new child processes ID, and create a new
- procinfo struct from that.
-
- After that, it pretends that we got a SIGTRAP, and returns non-zero
- to tell procfs_wait to wake up. Subsequently, wait_for_inferior gets
- woken up, sees the new process and continues it.
-
-NOTES
- We actually never see the child exiting from sproc because we will
- shortly stop the child with PIOCSTOP, which is then registered as the
- event of interest.
- */
-
-static int
-procfs_sproc_handler (pi, syscall_num, why, rtnvalp, statvalp)
- struct procinfo *pi;
- int syscall_num;
- int why;
- int *rtnvalp;
- int *statvalp;
-{
-/* We've just detected the completion of an sproc system call. Now we need to
- setup a procinfo struct for this thread, and notify the thread system of the
- new arrival. */
-
-/* If sproc failed, then nothing interesting happened. Continue the process
- and go back to sleep. */
-
- if (pi->prstatus.pr_errno != 0)
- {
- pi->prrun.pr_flags &= PRSTEP;
- pi->prrun.pr_flags |= PRCFAULT;
-
- if (ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
- perror_with_name (pi->pathname);
-
- return 0;
- }
-
- /* At this point, the new thread is stopped at it's first instruction, and
- the parent is stopped at the exit from sproc. */
-
- /* Notify the caller of the arrival of a new thread. */
- create_procinfo (pi->prstatus.pr_rval1);
-
- *rtnvalp = pi->prstatus.pr_rval1;
- *statvalp = (SIGTRAP << 8) | 0177;
-
- return 1;
-}
-
-/*
-
-LOCAL FUNCTION
-
- procfs_fork_handler - handle exit from the fork syscall
-
-SYNOPSIS
-
- int procfs_fork_handler (pi, syscall_num, why, rtnvalp, statvalp)
-
-DESCRIPTION
-
- This routine is called when an inferior process is about to finish a
- fork() system call. We will open up the new process, and then close
- it, which releases it from the clutches of the debugger.
-
- After that, we continue the target process as though nothing had
- happened.
-
-NOTES
- This is necessary for IRIX because we have to set PR_FORK in order
- to catch the creation of lwps (via sproc()). When an actual fork
- occurs, it becomes necessary to reset the forks debugger flags and
- continue it because we can't hack multiple processes yet.
- */
-
-static int
-procfs_fork_handler (pi, syscall_num, why, rtnvalp, statvalp)
- struct procinfo *pi;
- int syscall_num;
- int why;
- int *rtnvalp;
- int *statvalp;
-{
- struct procinfo *pitemp;
-
-/* At this point, we've detected the completion of a fork (or vfork) call in
- our child. The grandchild is also stopped because we set inherit-on-fork
- earlier. (Note that nobody has the grandchilds' /proc file open at this
- point.) We will release the grandchild from the debugger by opening it's
- /proc file and then closing it. Since run-on-last-close is set, the
- grandchild continues on its' merry way. */
-
-
- pitemp = create_procinfo (pi->prstatus.pr_rval1);
- if (pitemp)
- close_proc_file (pitemp);
-
- if (ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
- perror_with_name (pi->pathname);
-
- return 0;
-}
-#endif /* SYS_sproc && !UNIXWARE */
-
-/*
-
-LOCAL FUNCTION
-
- procfs_set_inferior_syscall_traps - setup the syscall traps
-
-SYNOPSIS
-
- void procfs_set_inferior_syscall_traps (struct procinfo *pip)
-
-DESCRIPTION
-
- Called for each "procinfo" (process, thread, or LWP) in the
- inferior, to register for notification of and handlers for
- syscall traps in the inferior.
-
- */
-
-static void
-procfs_set_inferior_syscall_traps (pip)
- struct procinfo *pip;
-{
- procfs_set_syscall_trap (pip, SYS_exit, PROCFS_SYSCALL_ENTRY,
- procfs_exit_handler);
-
-#ifndef PRFS_STOPEXEC
-#ifdef SYS_exec
- procfs_set_syscall_trap (pip, SYS_exec, PROCFS_SYSCALL_EXIT,
- procfs_exec_handler);
-#endif
-#ifdef SYS_execv
- procfs_set_syscall_trap (pip, SYS_execv, PROCFS_SYSCALL_EXIT,
- procfs_exec_handler);
-#endif
-#ifdef SYS_execve
- procfs_set_syscall_trap (pip, SYS_execve, PROCFS_SYSCALL_EXIT,
- procfs_exec_handler);
-#endif
-#endif /* PRFS_STOPEXEC */
-
- /* Setup traps on exit from sproc() */
-
-#ifdef SYS_sproc
- procfs_set_syscall_trap (pip, SYS_sproc, PROCFS_SYSCALL_EXIT,
- procfs_sproc_handler);
- procfs_set_syscall_trap (pip, SYS_fork, PROCFS_SYSCALL_EXIT,
- procfs_fork_handler);
-#ifdef SYS_vfork
- procfs_set_syscall_trap (pip, SYS_vfork, PROCFS_SYSCALL_EXIT,
- procfs_fork_handler);
-#endif
-/* Turn on inherit-on-fork flag so that all children of the target process
- start with tracing flags set. This allows us to trap lwp creation. Note
- that we also have to trap on fork and vfork in order to disable all tracing
- in the targets child processes. */
-
- modify_inherit_on_fork_flag (pip->ctl_fd, 1);
-#endif
-
-#ifdef SYS_lwp_create
- procfs_set_syscall_trap (pip, SYS_lwp_create, PROCFS_SYSCALL_EXIT,
- procfs_lwp_creation_handler);
-#endif
-}
-
-/*
-
-LOCAL FUNCTION
-
- procfs_init_inferior - initialize target vector and access to a
- /proc entry
-
-SYNOPSIS
-
- void procfs_init_inferior (int pid)
-
-DESCRIPTION
-
- When gdb starts an inferior, this function is called in the parent
- process immediately after the fork. It waits for the child to stop
- on the return from the exec system call (the child itself takes care
- of ensuring that this is set up), then sets up the set of signals
- and faults that are to be traced. Returns the pid, which may have had
- the thread-id added to it.
-
-NOTES
-
- If proc_init_failed ever gets called, control returns to the command
- processing loop via the standard error handling code.
-
- */
-
-static void
-procfs_init_inferior (pid)
- int pid;
-{
- struct procinfo *pip;
-
- push_target (&procfs_ops);
-
- pip = create_procinfo (pid);
-
- procfs_set_inferior_syscall_traps (pip);
-
- /* create_procinfo may change the pid, so we have to update inferior_pid
- here before calling other gdb routines that need the right pid. */
-
- pid = pip -> pid;
- inferior_pid = pid;
-
- add_thread (pip -> pid); /* Setup initial thread */
-
-#ifdef START_INFERIOR_TRAPS_EXPECTED
- startup_inferior (START_INFERIOR_TRAPS_EXPECTED);
-#else
- /* One trap to exec the shell, one to exec the program being debugged. */
- startup_inferior (2);
-#endif
-}
-
-/*
-
-GLOBAL FUNCTION
-
- procfs_notice_signals
-
-SYNOPSIS
-
- static void procfs_notice_signals (int pid);
-
-DESCRIPTION
-
- When the user changes the state of gdb's signal handling via the
- "handle" command, this function gets called to see if any change
- in the /proc interface is required. It is also called internally
- by other /proc interface functions to initialize the state of
- the traced signal set.
-
- One thing it does is that signals for which the state is "nostop",
- "noprint", and "pass", have their trace bits reset in the pr_trace
- field, so that they are no longer traced. This allows them to be
- delivered directly to the inferior without the debugger ever being
- involved.
- */
-
-static void
-procfs_notice_signals (pid)
- int pid;
-{
- struct procinfo *pi;
- struct sig_ctl sctl;
-
- pi = find_procinfo (pid, 0);
-
-#ifndef HAVE_PRRUN_T
- premptyset (&sctl.sigset);
-#else
- sctl.sigset = pi->prrun.pr_trace;
-#endif
-
- notice_signals (pi, &sctl);
-
-#ifdef HAVE_PRRUN_T
- pi->prrun.pr_trace = sctl.sigset;
-#endif
-}
-
-static void
-notice_signals (pi, sctl)
- struct procinfo *pi;
- struct sig_ctl *sctl;
-{
- int signo;
-
- for (signo = 0; signo < NSIG; signo++)
- {
- if (signal_stop_state (target_signal_from_host (signo)) == 0 &&
- signal_print_state (target_signal_from_host (signo)) == 0 &&
- signal_pass_state (target_signal_from_host (signo)) == 1)
- {
- prdelset (&sctl->sigset, signo);
- }
- else
- {
- praddset (&sctl->sigset, signo);
- }
- }
-#ifdef PROCFS_USE_READ_WRITE
- sctl->cmd = PCSTRACE;
- if (write (pi->ctl_fd, (char *) sctl, sizeof (struct sig_ctl)) < 0)
-#else
- if (ioctl (pi->ctl_fd, PIOCSTRACE, &sctl->sigset))
-#endif
- {
- print_sys_errmsg ("PIOCSTRACE failed", errno);
- }
-}
-
-/*
-
-LOCAL FUNCTION
-
- proc_set_exec_trap -- arrange for exec'd child to halt at startup
-
-SYNOPSIS
-
- void proc_set_exec_trap (void)
-
-DESCRIPTION
-
- This function is called in the child process when starting up
- an inferior, prior to doing the exec of the actual inferior.
- It sets the child process's exitset to make exit from the exec
- system call an event of interest to stop on, and then simply
- returns. The child does the exec, the system call returns, and
- the child stops at the first instruction, ready for the gdb
- parent process to take control of it.
-
-NOTE
-
- We need to use all local variables since the child may be sharing
- it's data space with the parent, if vfork was used rather than
- fork.
-
- Also note that we want to turn off the inherit-on-fork flag in
- the child process so that any grand-children start with all
- tracing flags cleared.
- */
-
-static void
-proc_set_exec_trap ()
-{
- struct sys_ctl exitset;
- struct sys_ctl entryset;
- char procname[MAX_PROC_NAME_SIZE];
- int fd;
-
- sprintf (procname, CTL_PROC_NAME_FMT, getpid ());
-#ifdef UNIXWARE
- if ((fd = open (procname, O_WRONLY)) < 0)
-#else
- if ((fd = open (procname, O_RDWR)) < 0)
-#endif
- {
- perror (procname);
- gdb_flush (gdb_stderr);
- _exit (127);
- }
- premptyset (&exitset.sysset);
- premptyset (&entryset.sysset);
-
-#ifdef PRFS_STOPEXEC
- /* Under Alpha OSF/1 we have to use a PIOCSSPCACT ioctl to trace
- exits from exec system calls because of the user level loader. */
- {
- int prfs_flags;
-
- if (ioctl (fd, PIOCGSPCACT, &prfs_flags) < 0)
- {
- perror (procname);
- gdb_flush (gdb_stderr);
- _exit (127);
- }
- prfs_flags |= PRFS_STOPEXEC;
- if (ioctl (fd, PIOCSSPCACT, &prfs_flags) < 0)
- {
- perror (procname);
- gdb_flush (gdb_stderr);
- _exit (127);
- }
- }
-#else /* PRFS_STOPEXEC */
- /* GW: Rationale...
- Not all systems with /proc have all the exec* syscalls with the same
- names. On the SGI, for example, there is no SYS_exec, but there
- *is* a SYS_execv. So, we try to account for that. */
-
-#ifdef SYS_exec
- praddset (&exitset.sysset, SYS_exec);
-#endif
-#ifdef SYS_execve
- praddset (&exitset.sysset, SYS_execve);
-#endif
-#ifdef SYS_execv
- praddset (&exitset.sysset, SYS_execv);
-#endif
-
-#ifdef PROCFS_USE_READ_WRITE
- exitset.cmd = PCSEXIT;
- if (write (fd, (char *) &exitset, sizeof (struct sys_ctl)) < 0)
-#else
- if (ioctl (fd, PIOCSEXIT, &exitset.sysset) < 0)
-#endif
- {
- perror (procname);
- gdb_flush (gdb_stderr);
- _exit (127);
- }
-#endif /* PRFS_STOPEXEC */
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- praddset (&entryset.sysset, SYS_exit);
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
-#ifdef PROCFS_USE_READ_WRITE
- entryset.cmd = PCSENTRY;
- if (write (fd, (char *) &entryset, sizeof (struct sys_ctl)) < 0)
+#ifdef NEW_PROC_API
+ ret = &pi->prstatus.pr_lwp.pr_action;
#else
- if (ioctl (fd, PIOCSENTRY, &entryset.sysset) < 0)
+ ret = &pi->prstatus.pr_action;
#endif
- {
- perror (procname);
- gdb_flush (gdb_stderr);
- _exit (126);
- }
-
- /* Turn off inherit-on-fork flag so that all grand-children of gdb
- start with tracing flags cleared. */
-
- modify_inherit_on_fork_flag (fd, 0);
-
- /* Turn on run-on-last-close flag so that this process will not hang
- if GDB goes away for some reason. */
+ if (save && ret)
+ memcpy (save, ret, sizeof (struct sigaction));
- modify_run_on_last_close_flag (fd, 1);
-
-#ifndef UNIXWARE /* since this is a solaris-ism, we don't want it */
- /* NOTE: revisit when doing thread support for UW */
-#ifdef PR_ASYNC
- {
- long pr_flags;
- struct proc_ctl pctl;
-
-/* Solaris needs this to make procfs treat all threads seperately. Without
- this, all threads halt whenever something happens to any thread. Since
- GDB wants to control all this itself, it needs to set PR_ASYNC. */
-
- pr_flags = PR_ASYNC;
-#ifdef PROCFS_USE_READ_WRITE
- pctl.cmd = PCSET;
- pctl.data = PR_FORK|PR_ASYNC;
- write (fd, (char *) &pctl, sizeof (struct proc_ctl));
-#else
- ioctl (fd, PIOCSET, &pr_flags);
-#endif
- }
-#endif /* PR_ASYNC */
-#endif /* !UNIXWARE */
+ return ret;
}
/*
-
-GLOBAL FUNCTION
-
- proc_iterate_over_mappings -- call function for every mapped space
-
-SYNOPSIS
-
- int proc_iterate_over_mappings (int (*func)())
-
-DESCRIPTION
-
- Given a pointer to a function, call that function for every
- mapped address space, passing it an open file descriptor for
- the file corresponding to that mapped address space (if any)
- and the base address of the mapped space. Quit when we hit
- the end of the mappings or the function returns nonzero.
+ * Function: proc_get_held_signals
+ *
+ * returns the set of signals that are held / blocked.
+ * Will also copy the sigset if 'save' is non-zero.
*/
-#ifdef UNIXWARE
-int
-proc_iterate_over_mappings (func)
- int (*func) PARAMS ((int, CORE_ADDR));
+sigset_t *
+proc_get_held_signals (pi, save)
+ procinfo *pi;
+ sigset_t *save;
{
- int nmap;
- int fd;
- int funcstat = 0;
- prmap_t *prmaps;
- prmap_t *prmap;
- struct procinfo *pi;
- struct stat sbuf;
-
- pi = current_procinfo;
+ sigset_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- if (fstat (pi->map_fd, &sbuf) < 0)
- return 0;
+#ifdef NEW_PROC_API
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
- nmap = sbuf.st_size / sizeof (prmap_t);
- prmaps = (prmap_t *) alloca (nmap * sizeof(prmap_t));
- if ((lseek (pi->map_fd, 0, SEEK_SET) == 0) &&
- (read (pi->map_fd, (char *) prmaps, nmap * sizeof (prmap_t)) ==
- (nmap * sizeof (prmap_t))))
- {
- int i = 0;
- for (prmap = prmaps; i < nmap && funcstat == 0; ++prmap, ++i)
- {
- char name[sizeof ("/proc/1234567890/object") +
- sizeof (prmap->pr_mapname)];
- sprintf (name, "/proc/%d/object/%s", pi->pid, prmap->pr_mapname);
- if ((fd = open (name, O_RDONLY)) == -1)
- {
- funcstat = 1;
- break;
- }
- funcstat = (*func) (fd, (CORE_ADDR) prmap->pr_vaddr);
- close (fd);
- }
- }
- return (funcstat);
-}
-#else /* UNIXWARE */
-int
-proc_iterate_over_mappings (func)
- int (*func) PARAMS ((int, CORE_ADDR));
-{
- int nmap;
- int fd;
- int funcstat = 0;
- struct prmap *prmaps;
- struct prmap *prmap;
- struct procinfo *pi;
+#ifdef UNIXWARE
+ ret = &pi->prstatus.pr_lwp.pr_context.uc_sigmask;
+#else
+ ret = &pi->prstatus.pr_lwp.pr_lwphold;
+#endif /* UNIXWARE */
+#else /* not NEW_PROC_API */
+ {
+ static sigset_t sigheld;
- pi = current_procinfo;
+ if (ioctl (pi->ctl_fd, PIOCGHOLD, &sigheld) >= 0)
+ ret = &sigheld;
+ }
+#endif /* NEW_PROC_API */
+ if (save && ret)
+ memcpy (save, ret, sizeof (sigset_t));
- if (ioctl (pi->map_fd, PIOCNMAP, &nmap) == 0)
- {
- prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
- if (ioctl (pi->map_fd, PIOCMAP, prmaps) == 0)
- {
- for (prmap = prmaps; prmap -> pr_size && funcstat == 0; ++prmap)
- {
- fd = proc_address_to_fd (pi, (CORE_ADDR) prmap -> pr_vaddr, 0);
- funcstat = (*func) (fd, (CORE_ADDR) prmap -> pr_vaddr);
- close (fd);
- }
- }
- }
- return (funcstat);
+ return ret;
}
-#endif /* UNIXWARE */
-#if 0 /* Currently unused */
/*
+ * Function: proc_get_traced_signals
+ *
+ * returns the set of signals that are traced / debugged.
+ * Will also copy the sigset if 'save' is non-zero.
+ */
-GLOBAL FUNCTION
-
- proc_base_address -- find base address for segment containing address
+sigset_t *
+proc_get_traced_signals (pi, save)
+ procinfo *pi;
+ sigset_t *save;
+{
+ sigset_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-SYNOPSIS
+#ifdef NEW_PROC_API
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
- CORE_ADDR proc_base_address (CORE_ADDR addr)
+ ret = &pi->prstatus.pr_sigtrace;
+#else
+ {
+ static sigset_t sigtrace;
-DESCRIPTION
+ if (ioctl (pi->ctl_fd, PIOCGTRACE, &sigtrace) >= 0)
+ ret = &sigtrace;
+ }
+#endif
+ if (save && ret)
+ memcpy (save, ret, sizeof (sigset_t));
- Given an address of a location in the inferior, find and return
- the base address of the mapped segment containing that address.
+ return ret;
+}
- This is used for example, by the shared library support code,
- where we have the pc value for some location in the shared library
- where we are stopped, and need to know the base address of the
- segment containing that address.
-*/
+/*
+ * Function: proc_trace_signal
+ *
+ * Add 'signo' to the set of signals that are traced.
+ * Returns non-zero for success, zero for failure.
+ */
-CORE_ADDR
-proc_base_address (addr)
- CORE_ADDR addr;
+int
+proc_trace_signal (pi, signo)
+ procinfo *pi;
+ int signo;
{
- int nmap;
- struct prmap *prmaps;
- struct prmap *prmap;
- CORE_ADDR baseaddr = 0;
- struct procinfo *pi;
-
- pi = current_procinfo;
+ sigset_t temp;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- if (ioctl (pi->map_fd, PIOCNMAP, &nmap) == 0)
+ if (pi)
{
- prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
- if (ioctl (pi->map_fd, PIOCMAP, prmaps) == 0)
+ if (proc_get_traced_signals (pi, &temp))
{
- for (prmap = prmaps; prmap -> pr_size; ++prmap)
- {
- if ((prmap -> pr_vaddr <= (caddr_t) addr) &&
- (prmap -> pr_vaddr + prmap -> pr_size > (caddr_t) addr))
- {
- baseaddr = (CORE_ADDR) prmap -> pr_vaddr;
- break;
- }
- }
+ praddset (&temp, signo);
+ return proc_set_traced_signals (pi, &temp);
}
}
- return (baseaddr);
-}
-#endif /* 0 */
+ return 0; /* failure */
+}
-#ifndef UNIXWARE
/*
+ * Function: proc_ignore_signal
+ *
+ * Remove 'signo' from the set of signals that are traced.
+ * Returns non-zero for success, zero for failure.
+ */
-LOCAL FUNCTION
-
- proc_address_to_fd -- return open fd for file mapped to address
-
-SYNOPSIS
-
- int proc_address_to_fd (struct procinfo *pi, CORE_ADDR addr, complain)
-
-DESCRIPTION
-
- Given an address in the current inferior's address space, use the
- /proc interface to find an open file descriptor for the file that
- this address was mapped in from. Return -1 if there is no current
- inferior. Print a warning message if there is an inferior but
- the address corresponds to no file (IE a bogus address).
-
-*/
-
-static int
-proc_address_to_fd (pi, addr, complain)
- struct procinfo *pi;
- CORE_ADDR addr;
- int complain;
+int
+proc_ignore_signal (pi, signo)
+ procinfo *pi;
+ int signo;
{
- int fd = -1;
+ sigset_t temp;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- if ((fd = ioctl (pi->ctl_fd, PIOCOPENM, (caddr_t *) &addr)) < 0)
+ if (pi)
{
- if (complain)
+ if (proc_get_traced_signals (pi, &temp))
{
- print_sys_errmsg (pi->pathname, errno);
- warning ("can't find mapped file for address 0x%x", addr);
+ prdelset (&temp, signo);
+ return proc_set_traced_signals (pi, &temp);
}
}
- return (fd);
+
+ return 0; /* failure */
}
-#endif /* !UNIXWARE */
-/* Attach to process PID, then initialize for debugging it
- and wait for the trace-trap that results from attaching. */
+/*
+ * Function: proc_get_traced_faults
+ *
+ * returns the set of hardware faults that are traced /debugged.
+ * Will also copy the faultset if 'save' is non-zero.
+ */
-static void
-procfs_attach (args, from_tty)
- char *args;
- int from_tty;
+fltset_t *
+proc_get_traced_faults (pi, save)
+ procinfo *pi;
+ fltset_t *save;
{
- char *exec_file;
- int pid;
-
- if (!args)
- error_no_arg ("process-id to attach");
-
- pid = atoi (args);
-
- if (pid == getpid()) /* Trying to masturbate? */
- error ("I refuse to debug myself!");
+ fltset_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- if (from_tty)
- {
- exec_file = (char *) get_exec_file (0);
+#ifdef NEW_PROC_API
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
- if (exec_file)
- printf_unfiltered ("Attaching to program `%s', %s\n", exec_file, target_pid_to_str (pid));
- else
- printf_unfiltered ("Attaching to %s\n", target_pid_to_str (pid));
+ ret = &pi->prstatus.pr_flttrace;
+#else
+ {
+ static fltset_t flttrace;
- gdb_flush (gdb_stdout);
- }
+ if (ioctl (pi->ctl_fd, PIOCGFAULT, &flttrace) >= 0)
+ ret = &flttrace;
+ }
+#endif
+ if (save && ret)
+ memcpy (save, ret, sizeof (fltset_t));
- inferior_pid = pid = do_attach (pid);
- push_target (&procfs_ops);
+ return ret;
}
+/*
+ * Function: proc_get_traced_sysentry
+ *
+ * returns the set of syscalls that are traced /debugged on entry.
+ * Will also copy the syscall set if 'save' is non-zero.
+ */
-/* Take a program previously attached to and detaches it.
- The program resumes execution and will no longer stop
- on signals, etc. We'd better not have left any breakpoints
- in the program or it'll die when it hits one. For this
- to work, it may be necessary for the process to have been
- previously attached. It *might* work if the program was
- started via the normal ptrace (PTRACE_TRACEME). */
-
-static void
-procfs_detach (args, from_tty)
- char *args;
- int from_tty;
+sysset_t *
+proc_get_traced_sysentry (pi, save)
+ procinfo *pi;
+ sysset_t *save;
{
- int siggnal = 0;
-
- if (from_tty)
- {
- char *exec_file = get_exec_file (0);
- if (exec_file == 0)
- exec_file = "";
- printf_unfiltered ("Detaching from program: %s %s\n",
- exec_file, target_pid_to_str (inferior_pid));
- gdb_flush (gdb_stdout);
- }
- if (args)
- siggnal = atoi (args);
+ sysset_t *ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
- do_detach (siggnal);
- inferior_pid = 0;
- unpush_target (&procfs_ops); /* Pop out of handling an inferior */
-}
-
-/* Get ready to modify the registers array. On machines which store
- individual registers, this doesn't need to do anything. On machines
- which store all the registers in one fell swoop, this makes sure
- that registers contains all the registers from the program being
- debugged. */
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-static void
-procfs_prepare_to_store ()
-{
-#ifdef CHILD_PREPARE_TO_STORE
- CHILD_PREPARE_TO_STORE ();
-#endif
-}
+#ifdef NEW_PROC_API
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
-/* Print status information about what we're accessing. */
+ ret = &pi->prstatus.pr_sysentry;
+#else
+ {
+ static sysset_t sysentry;
-static void
-procfs_files_info (ignore)
- struct target_ops *ignore;
-{
- printf_unfiltered ("\tUsing the running image of %s %s via /proc.\n",
- attach_flag? "attached": "child", target_pid_to_str (inferior_pid));
-}
+ if (ioctl (pi->ctl_fd, PIOCGENTRY, &sysentry) >= 0)
+ ret = &sysentry;
+ }
+#endif
+ if (save && ret)
+ memcpy (save, ret, sizeof (sysset_t));
-/* ARGSUSED */
-static void
-procfs_open (arg, from_tty)
- char *arg;
- int from_tty;
-{
- error ("Use the \"run\" command to start a Unix child process.");
+ return ret;
}
/*
+ * Function: proc_get_traced_sysexit
+ *
+ * returns the set of syscalls that are traced /debugged on exit.
+ * Will also copy the syscall set if 'save' is non-zero.
+ */
-LOCAL FUNCTION
-
- do_attach -- attach to an already existing process
-
-SYNOPSIS
-
- int do_attach (int pid)
-
-DESCRIPTION
-
- Attach to an already existing process with the specified process
- id. If the process is not already stopped, query whether to
- stop it or not.
-
-NOTES
-
- The option of stopping at attach time is specific to the /proc
- versions of gdb. Versions using ptrace force the attachee
- to stop. (I have changed this version to do so, too. All you
- have to do is "continue" to make it go on. -- gnu@cygnus.com)
-
-*/
-
-static int
-do_attach (pid)
- int pid;
+sysset_t *
+proc_get_traced_sysexit (pi, save)
+ procinfo *pi;
+ sysset_t *save;
{
- struct procinfo *pi;
- struct sig_ctl sctl;
- struct flt_ctl fctl;
- int nlwp, *lwps;
-
- pi = init_procinfo (pid, 0);
-
-#ifdef PIOCLWPIDS
- nlwp = pi->prstatus.pr_nlwp;
- lwps = alloca ((2 * nlwp + 2) * sizeof (id_t));
+ sysset_t * ret = NULL;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- if (ioctl (pi->ctl_fd, PIOCLWPIDS, lwps))
- {
- print_sys_errmsg (pi -> pathname, errno);
- error ("PIOCLWPIDS failed");
- }
-#else /* PIOCLWPIDS */
- nlwp = 1;
- lwps = alloca ((2 * nlwp + 2) * sizeof *lwps);
- lwps[0] = 0;
-#endif
- for (; nlwp > 0; nlwp--, lwps++)
- {
- /* First one has already been created above. */
- if ((pi = find_procinfo ((*lwps << 16) | pid, 1)) == 0)
- pi = init_procinfo ((*lwps << 16) | pid, 0);
+#ifdef NEW_PROC_API
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return NULL;
- if (THE_PR_LWP(pi->prstatus).pr_flags & (PR_STOPPED | PR_ISTOP))
- {
- pi->was_stopped = 1;
- }
- else
- {
- pi->was_stopped = 0;
- if (1 || query ("Process is currently running, stop it? "))
- {
- long cmd;
- /* Make it run again when we close it. */
- modify_run_on_last_close_flag (pi->ctl_fd, 1);
-#ifdef PROCFS_USE_READ_WRITE
- cmd = PCSTOP;
- if (write (pi->ctl_fd, (char *) &cmd, sizeof (long)) < 0)
+ ret = &pi->prstatus.pr_sysexit;
#else
- if (ioctl (pi->ctl_fd, PIOCSTOP, &pi->prstatus) < 0)
-#endif
- {
- print_sys_errmsg (pi->pathname, errno);
- close_proc_file (pi);
- error ("PIOCSTOP failed");
- }
-#ifdef UNIXWARE
- if (!procfs_read_status (pi))
- {
- print_sys_errmsg (pi->pathname, errno);
- close_proc_file (pi);
- error ("procfs_read_status failed");
- }
+ {
+ static sysset_t sysexit;
+
+ if (ioctl (pi->ctl_fd, PIOCGEXIT, &sysexit) >= 0)
+ ret = &sysexit;
+ }
#endif
- pi->nopass_next_sigstop = 1;
- }
- else
- {
- printf_unfiltered ("Ok, gdb will wait for %s to stop.\n",
- target_pid_to_str (pi->pid));
- }
- }
+ if (save && ret)
+ memcpy (save, ret, sizeof (sysset_t));
-#ifdef PROCFS_USE_READ_WRITE
- fctl.cmd = PCSFAULT;
- if (write (pi->ctl_fd, (char *) &fctl, sizeof (struct flt_ctl)) < 0)
- print_sys_errmsg ("PCSFAULT failed", errno);
-#else /* PROCFS_USE_READ_WRITE */
- if (ioctl (pi->ctl_fd, PIOCSFAULT, &pi->prrun.pr_fault))
- {
- print_sys_errmsg ("PIOCSFAULT failed", errno);
- }
- if (ioctl (pi->ctl_fd, PIOCSTRACE, &pi->prrun.pr_trace))
- {
- print_sys_errmsg ("PIOCSTRACE failed", errno);
- }
- add_thread (pi->pid);
- procfs_set_inferior_syscall_traps (pi);
-#endif /* PROCFS_USE_READ_WRITE */
- }
- attach_flag = 1;
- return (pi->pid);
+ return ret;
}
/*
-
-LOCAL FUNCTION
-
- do_detach -- detach from an attached-to process
-
-SYNOPSIS
-
- void do_detach (int signal)
-
-DESCRIPTION
-
- Detach from the current attachee.
-
- If signal is non-zero, the attachee is started running again and sent
- the specified signal.
-
- If signal is zero and the attachee was not already stopped when we
- attached to it, then we make it runnable again when we detach.
-
- Otherwise, we query whether or not to make the attachee runnable
- again, since we may simply want to leave it in the state it was in
- when we attached.
-
- We report any problems, but do not consider them errors, since we
- MUST detach even if some things don't seem to go right. This may not
- be the ideal situation. (FIXME).
+ * Function: proc_clear_current_fault
+ *
+ * The current fault (if any) is cleared; the associated signal
+ * will not be sent to the process or LWP when it resumes.
+ * Returns non-zero for success, zero for failure.
*/
-static void
-do_detach (signal)
- int signal;
+int
+proc_clear_current_fault (pi)
+ procinfo *pi;
{
- struct procinfo *pi;
-
- for (pi = procinfo_list; pi; pi = pi->next)
- {
- if (signal)
- {
- set_proc_siginfo (pi, signal);
- }
-#ifdef PROCFS_USE_READ_WRITE
- pi->saved_exitset.cmd = PCSEXIT;
- if (write (pi->ctl_fd, (char *) &pi->saved_exitset,
- sizeof (struct sys_ctl)) < 0)
-#else
- if (ioctl (pi->ctl_fd, PIOCSEXIT, &pi->saved_exitset.sysset) < 0)
-#endif
- {
- print_sys_errmsg (pi->pathname, errno);
- printf_unfiltered ("PIOCSEXIT failed.\n");
- }
-#ifdef PROCFS_USE_READ_WRITE
- pi->saved_entryset.cmd = PCSENTRY;
- if (write (pi->ctl_fd, (char *) &pi->saved_entryset,
- sizeof (struct sys_ctl)) < 0)
-#else
- if (ioctl (pi->ctl_fd, PIOCSENTRY, &pi->saved_entryset.sysset) < 0)
-#endif
- {
- print_sys_errmsg (pi->pathname, errno);
- printf_unfiltered ("PIOCSENTRY failed.\n");
- }
-#ifdef PROCFS_USE_READ_WRITE
- pi->saved_trace.cmd = PCSTRACE;
- if (write (pi->ctl_fd, (char *) &pi->saved_trace,
- sizeof (struct sig_ctl)) < 0)
-#else
- if (ioctl (pi->ctl_fd, PIOCSTRACE, &pi->saved_trace.sigset) < 0)
-#endif
- {
- print_sys_errmsg (pi->pathname, errno);
- printf_unfiltered ("PIOCSTRACE failed.\n");
- }
-#ifndef UNIXWARE
- if (ioctl (pi->ctl_fd, PIOCSHOLD, &pi->saved_sighold.sigset) < 0)
- {
- print_sys_errmsg (pi->pathname, errno);
- printf_unfiltered ("PIOSCHOLD failed.\n");
- }
-#endif
-#ifdef PROCFS_USE_READ_WRITE
- pi->saved_fltset.cmd = PCSFAULT;
- if (write (pi->ctl_fd, (char *) &pi->saved_fltset,
- sizeof (struct flt_ctl)) < 0)
-#else
- if (ioctl (pi->ctl_fd, PIOCSFAULT, &pi->saved_fltset.fltset) < 0)
-#endif
- {
- print_sys_errmsg (pi->pathname, errno);
- printf_unfiltered ("PIOCSFAULT failed.\n");
- }
- if (!procfs_read_status (pi))
- {
- print_sys_errmsg (pi->pathname, errno);
- printf_unfiltered ("procfs_read_status failed.\n");
- }
- else
- {
- if (signal
- || (THE_PR_LWP(pi->prstatus).pr_flags & (PR_STOPPED | PR_ISTOP)))
- {
- long cmd;
- struct proc_ctl pctl;
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- if (signal || !pi->was_stopped ||
- query ("Was stopped when attached, make it runnable again? "))
- {
- /* Clear any pending signal if we want to detach without
- a signal. */
- if (signal == 0)
- set_proc_siginfo (pi, signal);
-
- /* Clear any fault that might have stopped it. */
-#ifdef PROCFS_USE_READ_WRITE
- cmd = PCCFAULT;
- if (write (pi->ctl_fd, (char *) &cmd, sizeof (long)) < 0)
+#ifdef NEW_PROC_API
+ {
+ int cmd = PCCFAULT;
+ win = (write (pi->ctl_fd, (void *) &cmd, sizeof (cmd)) == sizeof (cmd));
+ }
#else
- if (ioctl (pi->ctl_fd, PIOCCFAULT, 0))
+ win = (ioctl (pi->ctl_fd, PIOCCFAULT, 0) >= 0);
#endif
- {
- print_sys_errmsg (pi->pathname, errno);
- printf_unfiltered ("PIOCCFAULT failed.\n");
- }
- /* Make it run again when we close it. */
-
- modify_run_on_last_close_flag (pi->ctl_fd, 1);
- }
- }
- }
- close_proc_file (pi);
- }
- attach_flag = 0;
+ return win;
}
-/* emulate wait() as much as possible.
- Wait for child to do something. Return pid of child, or -1 in case
- of error; store status in *OURSTATUS.
-
- Not sure why we can't
- just use wait(), but it seems to have problems when applied to a
- process being controlled with the /proc interface.
-
- We have a race problem here with no obvious solution. We need to let
- the inferior run until it stops on an event of interest, which means
- that we need to use the PIOCWSTOP ioctl. However, we cannot use this
- ioctl if the process is already stopped on something that is not an
- event of interest, or the call will hang indefinitely. Thus we first
- use PIOCSTATUS to see if the process is not stopped. If not, then we
- use PIOCWSTOP. But during the window between the two, if the process
- stops for any reason that is not an event of interest (such as a job
- control signal) then gdb will hang. One possible workaround is to set
- an alarm to wake up every minute of so and check to see if the process
- is still running, and if so, then reissue the PIOCWSTOP. But this is
- a real kludge, so has not been implemented. FIXME: investigate
- alternatives.
-
- FIXME: Investigate why wait() seems to have problems with programs
- being control by /proc routines. */
-static int
-procfs_wait (pid, ourstatus)
- int pid;
- struct target_waitstatus *ourstatus;
+/*
+ * Function: proc_set_current_signal
+ *
+ * Set the "current signal" that will be delivered next to the process.
+ * NOTE: semantics are different from those of KILL.
+ * This signal will be delivered to the process or LWP
+ * immediately when it is resumed (even if the signal is held/blocked);
+ * it will NOT immediately cause another event of interest, and will NOT
+ * first trap back to the debugger.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+int
+proc_set_current_signal (pi, signo)
+ procinfo *pi;
+ int signo;
{
- short what;
- short why;
- int statval = 0;
- int checkerr = 0;
- int rtnval = -1;
- struct procinfo *pi;
- struct proc_ctl pctl;
+ int win;
+ struct {
+ int cmd;
+ /* Use char array to avoid alignment issues. */
+ char sinfo[sizeof (struct siginfo)];
+ } arg;
+ struct siginfo *mysinfo;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-scan_again:
+#ifdef PROCFS_DONT_PIOCSSIG_CURSIG
+ /* With Alpha OSF/1 procfs, the kernel gets really confused if it
+ * receives a PIOCSSIG with a signal identical to the current signal,
+ * it messes up the current signal. Work around the kernel bug.
+ */
+ if (signo > 0 &&
+ signo == proc_cursig (pi))
+ return 1; /* I assume this is a success? */
+#endif
+
+ /* The pointer is just a type alias. */
+ mysinfo = (struct siginfo *) &arg.sinfo;
+ mysinfo->si_signo = signo;
+ mysinfo->si_code = 0;
+ mysinfo->si_pid = getpid (); /* ?why? */
+ mysinfo->si_uid = getuid (); /* ?why? */
+
+#ifdef NEW_PROC_API
+ arg.cmd = PCSSIG;
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+#else
+ win = (ioctl (pi->ctl_fd, PIOCSSIG, (void *) &arg.sinfo) >= 0);
+#endif
- /* handle all syscall events first, otherwise we might not
- notice a thread was created until too late. */
+ return win;
+}
- for (pi = procinfo_list; pi; pi = pi->next)
- {
- if (!pi->had_event)
- continue;
+/*
+ * Function: proc_clear_current_signal
+ *
+ * The current signal (if any) is cleared, and
+ * is not sent to the process or LWP when it resumes.
+ * Returns non-zero for success, zero for failure.
+ */
- if (! (THE_PR_LWP(pi->prstatus).pr_flags & (PR_STOPPED | PR_ISTOP)) )
- continue;
+int
+proc_clear_current_signal (pi)
+ procinfo *pi;
+{
+ int win;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- why = THE_PR_LWP(pi->prstatus).pr_why;
- what = THE_PR_LWP(pi->prstatus).pr_what;
- if (why == PR_SYSENTRY || why == PR_SYSEXIT)
- {
- int i;
- int found_handler = 0;
-
- for (i = 0; i < pi->num_syscall_handlers; i++)
- if (pi->syscall_handlers[i].syscall_num == what)
- {
- found_handler = 1;
- pi->saved_rtnval = pi->pid;
- pi->saved_statval = 0;
- if (!pi->syscall_handlers[i].func
- (pi, what, why, &pi->saved_rtnval, &pi->saved_statval))
- pi->had_event = 0;
- break;
- }
+#ifdef NEW_PROC_API
+ {
+ struct {
+ int cmd;
+ /* Use char array to avoid alignment issues. */
+ char sinfo[sizeof (struct siginfo)];
+ } arg;
+ struct siginfo *mysinfo;
+
+ arg.cmd = PCSSIG;
+ /* The pointer is just a type alias. */
+ mysinfo = (struct siginfo *) &arg.sinfo;
+ mysinfo->si_signo = 0;
+ mysinfo->si_code = 0;
+ mysinfo->si_errno = 0;
+ mysinfo->si_pid = getpid (); /* ?why? */
+ mysinfo->si_uid = getuid (); /* ?why? */
+
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+ }
+#else
+ win = (ioctl (pi->ctl_fd, PIOCSSIG, 0) >= 0);
+#endif
- if (!found_handler)
- {
- if (why == PR_SYSENTRY)
- error ("PR_SYSENTRY, unhandled system call %d", what);
- else
- error ("PR_SYSEXIT, unhandled system call %d", what);
- }
- }
- }
+ return win;
+}
- /* find a relevant process with an event */
+/*
+ * Function: proc_get_gregs
+ *
+ * Get the general registers for the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
- for (pi = procinfo_list; pi; pi = pi->next)
- if (pi->had_event && (pid == -1 || pi->pid == pid))
- break;
+gdb_gregset_t *
+proc_get_gregs (pi)
+ procinfo *pi;
+{
+ if (!pi->status_valid || !pi->gregs_valid)
+ if (!proc_get_status (pi))
+ return NULL;
+
+ /*
+ * OK, sorry about the ifdef's.
+ * There's three cases instead of two, because
+ * in this instance Unixware and Solaris/RW differ.
+ */
+
+#ifdef NEW_PROC_API
+#ifdef UNIXWARE /* ugh, a true architecture dependency */
+ return &pi->prstatus.pr_lwp.pr_context.uc_mcontext.gregs;
+#else /* not Unixware */
+ return &pi->prstatus.pr_lwp.pr_reg;
+#endif /* Unixware */
+#else /* not NEW_PROC_API */
+ return &pi->prstatus.pr_reg;
+#endif /* NEW_PROC_API */
+}
- if (!pi)
- {
- wait_fd ();
- goto scan_again;
- }
+/*
+ * Function: proc_get_fpregs
+ *
+ * Get the floating point registers for the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
+
+gdb_fpregset_t *
+proc_get_fpregs (pi)
+ procinfo *pi;
+{
+#ifdef NEW_PROC_API
+ if (!pi->status_valid || !pi->fpregs_valid)
+ if (!proc_get_status (pi))
+ return NULL;
- if (!checkerr
- && !(THE_PR_LWP(pi->prstatus).pr_flags & (PR_STOPPED | PR_ISTOP)))
+#ifdef UNIXWARE /* a true architecture dependency */
+ return &pi->prstatus.pr_lwp.pr_context.uc_mcontext.fpregs;
+#else
+ return &pi->prstatus.pr_lwp.pr_fpreg;
+#endif /* Unixware */
+
+#else /* not NEW_PROC_API */
+ if (pi->fpregs_valid)
+ return &pi->fpregset; /* already got 'em */
+ else
{
- if (!procfs_write_pcwstop (pi))
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
{
- checkerr++;
+ return NULL;
}
- }
- if (checkerr)
- {
- if (errno == ENOENT)
+ else
{
- /* XXX Fixme -- what to do if attached? Can't call wait... */
- rtnval = wait (&statval);
- if ((rtnval) != (PIDGET (inferior_pid)))
+#ifdef PIOCTGFPREG
+ struct {
+ long pr_count;
+ tid_t pr_error_thread;
+ tfpregset_t thread_1;
+ } thread_fpregs;
+
+ thread_fpregs.pr_count = 1;
+ thread_fpregs.thread_1.tid = pi->tid;
+
+ if (pi->tid == 0 &&
+ ioctl (pi->ctl_fd, PIOCGFPREG, &pi->fpregset) >= 0)
{
- print_sys_errmsg (pi->pathname, errno);
- error ("procfs_wait: wait failed, returned %d", rtnval);
- /* NOTREACHED */
+ pi->fpregs_valid = 1;
+ return &pi->fpregset; /* got 'em now! */
+ }
+ else if (pi->tid != 0 &&
+ ioctl (pi->ctl_fd, PIOCTGFPREG, &thread_fpregs) >= 0)
+ {
+ memcpy (&pi->fpregset, &thread_fpregs.thread_1.pr_fpregs,
+ sizeof (pi->fpregset));
+ pi->fpregs_valid = 1;
+ return &pi->fpregset; /* got 'em now! */
+ }
+ else
+ {
+ return NULL;
}
- }
- else
- {
- print_sys_errmsg (pi->pathname, errno);
- error ("PIOCSTATUS or PIOCWSTOP failed.");
- /* NOTREACHED */
- }
- }
- else if (THE_PR_LWP(pi->prstatus).pr_flags & (PR_STOPPED | PR_ISTOP))
- {
-#ifdef UNIXWARE
- rtnval = pi->prstatus.pr_pid;
#else
- rtnval = pi->pid;
-#endif
- why = THE_PR_LWP(pi->prstatus).pr_why;
- what = THE_PR_LWP(pi->prstatus).pr_what;
-
- switch (why)
- {
- case PR_SIGNALLED:
- statval = (what << 8) | 0177;
- break;
- case PR_SYSENTRY:
- case PR_SYSEXIT:
- rtnval = pi->saved_rtnval;
- statval = pi->saved_statval;
- break;
- case PR_REQUESTED:
- statval = (SIGSTOP << 8) | 0177;
- break;
- case PR_JOBCONTROL:
- statval = (what << 8) | 0177;
- break;
- case PR_FAULTED:
- switch (what)
+ if (ioctl (pi->ctl_fd, PIOCGFPREG, &pi->fpregset) >= 0)
{
-#ifdef FLTWATCH
- case FLTWATCH:
- statval = (SIGTRAP << 8) | 0177;
- break;
-#endif
-#ifdef FLTKWATCH
- case FLTKWATCH:
- statval = (SIGTRAP << 8) | 0177;
- break;
-#endif
-#ifndef FAULTED_USE_SIGINFO
- /* Irix, contrary to the documentation, fills in 0 for si_signo.
- Solaris fills in si_signo. I'm not sure about others. */
- case FLTPRIV:
- case FLTILL:
- statval = (SIGILL << 8) | 0177;
- break;
- case FLTBPT:
- case FLTTRACE:
- statval = (SIGTRAP << 8) | 0177;
- break;
- case FLTSTACK:
- case FLTACCESS:
- case FLTBOUNDS:
- statval = (SIGSEGV << 8) | 0177;
- break;
- case FLTIOVF:
- case FLTIZDIV:
- case FLTFPE:
- statval = (SIGFPE << 8) | 0177;
- break;
- case FLTPAGE: /* Recoverable page fault */
-#endif /* not FAULTED_USE_SIGINFO */
- default:
- /* Use the signal which the kernel assigns. This is better than
- trying to second-guess it from the fault. In fact, I suspect
- that FLTACCESS can be either SIGSEGV or SIGBUS. */
- statval =
- ((THE_PR_LWP(pi->prstatus).pr_info.si_signo) << 8) | 0177;
- break;
+ pi->fpregs_valid = 1;
+ return &pi->fpregset; /* got 'em now! */
}
- break;
- default:
- error ("PIOCWSTOP, unknown why %d, what %d", why, what);
+ else
+ {
+ return NULL;
+ }
+#endif
}
- /* Stop all the other threads when any of them stops. */
+ }
+#endif
+}
- {
- struct procinfo *procinfo, *next_pi;
-
- for (procinfo = procinfo_list; procinfo; procinfo = next_pi)
- {
- next_pi = procinfo->next;
- if (!procinfo->had_event)
- {
-#ifdef PROCFS_USE_READ_WRITE
- long cmd = PCSTOP;
- if (write (pi->ctl_fd, (char *) &cmd, sizeof (long)) < 0)
- {
- print_sys_errmsg (procinfo->pathname, errno);
- error ("PCSTOP failed");
- }
-#else
- /* A bug in Solaris (2.5) causes us to hang when trying to
- stop a stopped process. So, we have to check first in
- order to avoid the hang. */
- if (!procfs_read_status (procinfo))
- {
- /* The LWP has apparently terminated. */
- if (info_verbose)
- printf_filtered ("LWP %d doesn't respond.\n",
- (procinfo->pid >> 16) & 0xffff);
- close_proc_file (procinfo);
- continue;
- }
+/*
+ * Function: proc_set_gregs
+ *
+ * Write the general registers back to the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
- if (!(procinfo->prstatus.pr_flags & PR_STOPPED))
- if (ioctl (procinfo->ctl_fd, PIOCSTOP, &procinfo->prstatus)
- < 0)
- {
- print_sys_errmsg (procinfo->pathname, errno);
- warning ("PIOCSTOP failed");
- }
-#endif
- }
- }
- }
- }
- else
- {
- error ("PIOCWSTOP, stopped for unknown/unhandled reason, flags %#x",
- THE_PR_LWP(pi->prstatus).pr_flags);
- }
+int
+proc_set_gregs (pi)
+ procinfo *pi;
+{
+ gdb_gregset_t *gregs;
+ int win;
- store_waitstatus (ourstatus, statval);
+ if ((gregs = proc_get_gregs (pi)) == NULL)
+ return 0; /* get_regs has already warned */
- if (rtnval == -1) /* No more children to wait for */
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
+ {
+ return 0;
+ }
+ else
{
- warning ("Child process unexpectedly missing");
- /* Claim it exited with unknown signal. */
- ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
- ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
- return rtnval;
+#ifdef NEW_PROC_API
+ struct {
+ int cmd;
+ /* Use char array to avoid alignment issues. */
+ char gregs[sizeof (gdb_gregset_t)];
+ } arg;
+
+ arg.cmd = PCSREG;
+ memcpy (&arg.gregs, gregs, sizeof (arg.gregs));
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+#else
+ win = (ioctl (pi->ctl_fd, PIOCSREG, gregs) >= 0);
+#endif
}
- pi->had_event = 0; /* Indicate that we've seen this one */
- return (rtnval);
+ /* Policy: writing the regs invalidates our cache. */
+ pi->gregs_valid = 0;
+ return win;
}
/*
+ * Function: proc_set_fpregs
+ *
+ * Modify the floating point register set of the process or LWP.
+ * Returns non-zero for success, zero for failure.
+ */
-LOCAL FUNCTION
-
- set_proc_siginfo - set a process's current signal info
-
-SYNOPSIS
-
- void set_proc_siginfo (struct procinfo *pip, int signo);
-
-DESCRIPTION
+int
+proc_set_fpregs (pi)
+ procinfo *pi;
+{
+ gdb_fpregset_t *fpregs;
+ int win;
- Given a pointer to a process info struct in PIP and a signal number
- in SIGNO, set the process's current signal and its associated signal
- information. The signal will be delivered to the process immediately
- after execution is resumed, even if it is being held. In addition,
- this particular delivery will not cause another PR_SIGNALLED stop
- even if the signal is being traced.
+ if ((fpregs = proc_get_fpregs (pi)) == NULL)
+ return 0; /* get_fpregs has already warned */
- If we are not delivering the same signal that the prstatus siginfo
- struct contains information about, then synthesize a siginfo struct
- to match the signal we are doing to deliver, make it of the type
- "generated by a user process", and send this synthesized copy. When
- used to set the inferior's signal state, this will be required if we
- are not currently stopped because of a traced signal, or if we decide
- to continue with a different signal.
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
+ {
+ return 0;
+ }
+ else
+ {
+#ifdef NEW_PROC_API
+ struct {
+ int cmd;
+ /* Use char array to avoid alignment issues. */
+ char fpregs[sizeof (gdb_fpregset_t)];
+ } arg;
+
+ arg.cmd = PCSFPREG;
+ memcpy (&arg.fpregs, fpregs, sizeof (arg.fpregs));
+ win = (write (pi->ctl_fd, (void *) &arg, sizeof (arg)) == sizeof (arg));
+#else
+#ifdef PIOCTSFPREG
+ if (pi->tid == 0)
+ win = (ioctl (pi->ctl_fd, PIOCSFPREG, fpregs) >= 0);
+ else
+ {
+ struct {
+ long pr_count;
+ tid_t pr_error_thread;
+ tfpregset_t thread_1;
+ } thread_fpregs;
+
+ thread_fpregs.pr_count = 1;
+ thread_fpregs.thread_1.tid = pi->tid;
+ memcpy (&thread_fpregs.thread_1.pr_fpregs, fpregs,
+ sizeof (*fpregs));
+ win = (ioctl (pi->ctl_fd, PIOCTSFPREG, &thread_fpregs) >= 0);
+ }
+#else
+ win = (ioctl (pi->ctl_fd, PIOCSFPREG, fpregs) >= 0);
+#endif /* osf PIOCTSFPREG */
+#endif /* NEW_PROC_API */
+ }
- Note that when continuing the inferior from a stop due to receipt
- of a traced signal, we either have set PRCSIG to clear the existing
- signal, or we have to call this function to do a PIOCSSIG with either
- the existing siginfo struct from pr_info, or one we have synthesized
- appropriately for the signal we want to deliver. Otherwise if the
- signal is still being traced, the inferior will immediately stop
- again.
+ /* Policy: writing the regs invalidates our cache. */
+ pi->fpregs_valid = 0;
+ return win;
+}
- See siginfo(5) for more details.
-*/
+/*
+ * Function: proc_kill
+ *
+ * Send a signal to the proc or lwp with the semantics of "kill()".
+ * Returns non-zero for success, zero for failure.
+ */
-static void
-set_proc_siginfo (pip, signo)
- struct procinfo *pip;
+int
+proc_kill (pi, signo)
+ procinfo *pi;
int signo;
{
- struct siginfo newsiginfo;
- struct siginfo *sip;
- struct sigi_ctl sictl;
+ int win;
-#ifdef PROCFS_DONT_PIOCSSIG_CURSIG
- /* With Alpha OSF/1 procfs, the kernel gets really confused if it
- receives a PIOCSSIG with a signal identical to the current signal,
- it messes up the current signal. Work around the kernel bug. */
- if (signo == THE_PR_LWP(pip->prstatus).pr_cursig)
- return;
-#endif
+ /*
+ * We might conceivably apply this operation to an LWP, and
+ * the LWP's ctl file descriptor might not be open.
+ */
-#ifdef UNIXWARE
- if (signo == THE_PR_LWP(pip->prstatus).pr_info.si_signo)
- {
- memcpy ((char *) &sictl.siginfo, (char *) &pip->prstatus.pr_lwp.pr_info,
- sizeof (siginfo_t));
- }
-#else
- if (signo == THE_PR_LWP(pip->prstatus).pr_info.si_signo)
+ if (pi->ctl_fd == 0 &&
+ open_procinfo_files (pi, FD_CTL) == 0)
{
- sip = &pip -> prstatus.pr_info;
+ return 0;
}
-#endif
else
{
-#ifdef UNIXWARE
- siginfo_t *sip = &sictl.siginfo;
- memset ((char *) sip, 0, sizeof (siginfo_t));
-#else
- memset ((char *) &newsiginfo, 0, sizeof (newsiginfo));
- sip = &newsiginfo;
-#endif
- sip -> si_signo = signo;
- sip -> si_code = 0;
- sip -> si_errno = 0;
- sip -> si_pid = getpid ();
- sip -> si_uid = getuid ();
- }
-#ifdef PROCFS_USE_READ_WRITE
- sictl.cmd = PCSSIG;
- if (write (pip->ctl_fd, (char *) &sictl, sizeof (struct sigi_ctl)) < 0)
-#else
- if (ioctl (pip->ctl_fd, PIOCSSIG, sip) < 0)
+#ifdef NEW_PROC_API
+ int cmd[2];
+
+ cmd[0] = PCKILL;
+ cmd[1] = signo;
+ win = (write (pi->ctl_fd, (char *) &cmd, sizeof (cmd)) == sizeof (cmd));
+#else /* ioctl method */
+ /* FIXME: do I need the Alpha OSF fixups present in
+ procfs.c/unconditionally_kill_inferior? Perhaps only for SIGKILL? */
+ win = (ioctl (pi->ctl_fd, PIOCKILL, &signo) >= 0);
#endif
- {
- print_sys_errmsg (pip -> pathname, errno);
- warning ("PIOCSSIG failed");
- }
+ }
+
+ return win;
}
-/* Resume execution of process PID. If STEP is nozero, then
- just single step it. If SIGNAL is nonzero, restart it with that
- signal activated. */
+/*
+ * Function: proc_parent_pid
+ *
+ * Find the pid of the process that started this one.
+ * Returns the parent process pid, or zero.
+ */
-static void
-procfs_resume (pid, step, signo)
- int pid;
- int step;
- enum target_signal signo;
+int
+proc_parent_pid (pi)
+ procinfo *pi;
{
- int signal_to_pass;
- struct procinfo *pi, *procinfo, *next_pi;
- struct proc_ctl pctl;
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- pi = find_procinfo (pid == -1 ? inferior_pid : pid, 0);
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0;
- errno = 0;
-#ifdef UNIXWARE
- pctl.cmd = PCRUN;
- pctl.data = PRCFAULT;
-#else
- pi->prrun.pr_flags = PRSTRACE | PRSFAULT | PRCFAULT;
-#endif
+ return pi->prstatus.pr_ppid;
+}
-#if 0
- /* It should not be necessary. If the user explicitly changes the value,
- value_assign calls write_register_bytes, which writes it. */
-/* It may not be absolutely necessary to specify the PC value for
- restarting, but to be safe we use the value that gdb considers
- to be current. One case where this might be necessary is if the
- user explicitly changes the PC value that gdb considers to be
- current. FIXME: Investigate if this is necessary or not. */
-
-#ifdef PRSVADDR_BROKEN
-/* Can't do this under Solaris running on a Sparc, as there seems to be no
- place to put nPC. In fact, if you use this, nPC seems to be set to some
- random garbage. We have to rely on the fact that PC and nPC have been
- written previously via PIOCSREG during a register flush. */
-
- pi->prrun.pr_vaddr = (caddr_t) *(int *) ®isters[REGISTER_BYTE (PC_REGNUM)];
- pi->prrun.pr_flags != PRSVADDR;
-#endif
-#endif
- if (signo == TARGET_SIGNAL_STOP && pi->nopass_next_sigstop)
- /* When attaching to a child process, if we forced it to stop with
- a PIOCSTOP, then we will have set the nopass_next_sigstop flag.
- Upon resuming the first time after such a stop, we explicitly
- inhibit sending it another SIGSTOP, which would be the normal
- result of default signal handling. One potential drawback to
- this is that we will also ignore any attempt to by the user
- to explicitly continue after the attach with a SIGSTOP. Ultimately
- this problem should be dealt with by making the routines that
- deal with the inferior a little smarter, and possibly even allow
- an inferior to continue running at the same time as gdb. (FIXME?) */
- signal_to_pass = 0;
- else if (signo == TARGET_SIGNAL_TSTP
- && THE_PR_LWP(pi->prstatus).pr_cursig == SIGTSTP
- && THE_PR_LWP(pi->prstatus).pr_action.sa_handler == SIG_DFL
- )
-
- /* We are about to pass the inferior a SIGTSTP whose action is
- SIG_DFL. The SIG_DFL action for a SIGTSTP is to stop
- (notifying the parent via wait()), and then keep going from the
- same place when the parent is ready for you to keep going. So
- under the debugger, it should do nothing (as if the program had
- been stopped and then later resumed. Under ptrace, this
- happens for us, but under /proc, the system obligingly stops
- the process, and wait_for_inferior would have no way of
- distinguishing that type of stop (which indicates that we
- should just start it again), with a stop due to the pr_trace
- field of the prrun_t struct.
-
- Note that if the SIGTSTP is being caught, we *do* need to pass it,
- because the handler needs to get executed. */
- signal_to_pass = 0;
- else
- signal_to_pass = target_signal_to_host (signo);
+/*
+ * Function: proc_set_watchpoint
+ *
+ */
- if (signal_to_pass)
- {
- set_proc_siginfo (pi, signal_to_pass);
- }
- else
- {
-#ifdef UNIXWARE
- pctl.data |= PRCSIG;
+int
+proc_set_watchpoint (pi, addr, len, wflags)
+ procinfo *pi;
+ void *addr;
+ int len;
+ int wflags;
+{
+#if !defined (TARGET_HAS_HARDWARE_WATCHPOINTS)
+ return 0;
#else
- pi->prrun.pr_flags |= PRCSIG;
-#endif
- }
- pi->nopass_next_sigstop = 0;
- if (step)
- {
-#ifdef UNIXWARE
- pctl.data |= PRSTEP;
+/* Horrible hack! Detect Solaris 2.5, because this doesn't work on 2.5 */
+#if defined (PIOCOPENLWP) || defined (UNIXWARE) /* Solaris 2.5: bail out */
+ return 0;
#else
- pi->prrun.pr_flags |= PRSTEP;
+ struct {
+ int cmd;
+ char watch[sizeof (prwatch_t)];
+ } arg;
+ prwatch_t *pwatch;
+
+ pwatch = (prwatch_t *) &arg.watch;
+ pwatch->pr_vaddr = addr;
+ pwatch->pr_size = len;
+ pwatch->pr_wflags = wflags;
+#if defined(NEW_PROC_API) && defined (PCWATCH)
+ arg.cmd = PCWATCH;
+ return (write (pi->ctl_fd, &arg, sizeof (arg)) == sizeof (arg));
+#else
+#if defined (PIOCSWATCH)
+ return (ioctl (pi->ctl_fd, PIOCSWATCH, pwatch) >= 0);
+#else
+ return 0; /* Fail */
#endif
- }
- pi->had_event = 0;
- /* Don't try to start a process unless it's stopped on an
- `event of interest'. Doing so will cause errors. */
+#endif
+#endif
+#endif
+}
- if (!procfs_read_status (pi))
- {
- /* The LWP has apparently terminated. */
- if (info_verbose)
- printf_filtered ("LWP %d doesn't respond.\n",
- (pi->pid >> 16) & 0xffff);
- close_proc_file (pi);
- }
- else
- {
-#ifdef PROCFS_USE_READ_WRITE
- if (write (pi->ctl_fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
+/*
+ * Function: proc_iterate_over_mappings
+ *
+ * Given a pointer to a function, call that function once for every
+ * mapped address space in the process. The callback function
+ * receives an open file descriptor for the file corresponding to
+ * that mapped address space (if there is one), and the base address
+ * of the mapped space. Quit when the callback function returns a
+ * nonzero value, or at teh end of the mappings.
+ *
+ * Returns: the first non-zero return value of the callback function,
+ * or zero.
+ */
+
+/* FIXME: it's probably a waste to cache this FD.
+ It doesn't get called that often... and if I open it
+ every time, I don't need to lseek it. */
+int
+proc_iterate_over_mappings (func)
+ int (*func) PARAMS ((int, CORE_ADDR));
+{
+ struct prmap *map;
+ procinfo *pi;
+#ifndef NEW_PROC_API /* avoid compiler warning */
+ int nmaps = 0;
+ int i;
#else
- if ((pi->prstatus.pr_flags & PR_ISTOP)
- && ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
+ int map_fd;
+ char pathname[MAX_PROC_NAME_SIZE];
#endif
- {
- /* The LWP has apparently terminated. */
- if (info_verbose)
- printf_filtered ("LWP %d doesn't respond.\n",
- (pi->pid >> 16) & 0xffff);
- close_proc_file (pi);
- }
- }
+ int funcstat = 0;
+ int fd;
- /* Continue all the other threads that haven't had an event of interest.
- Also continue them if they have NOPASS_NEXT_SIGSTOP set; this is only
- set by do_attach, and means this is the first resume after an attach.
- All threads were CSTOP'd by do_attach, and should be resumed now. */
+ pi = find_procinfo_or_die (PIDGET (inferior_pid), 0);
- if (pid == -1)
- for (procinfo = procinfo_list; procinfo; procinfo = next_pi)
- {
- next_pi = procinfo->next;
- if (pi != procinfo)
- if (!procinfo->had_event ||
- (procinfo->nopass_next_sigstop && signo == TARGET_SIGNAL_STOP))
- {
- procinfo->had_event = procinfo->nopass_next_sigstop = 0;
-#ifdef PROCFS_USE_READ_WRITE
- pctl.data = PRCFAULT | PRCSIG;
- if (write (procinfo->ctl_fd, (char *) &pctl,
- sizeof (struct proc_ctl)) < 0)
- {
- if (!procfs_read_status (procinfo))
- fprintf_unfiltered(gdb_stderr,
- "procfs_read_status failed, errno=%d\n",
- errno);
- print_sys_errmsg (procinfo->pathname, errno);
- error ("PCRUN failed");
- }
-#else
- procinfo->prrun.pr_flags &= PRSTEP;
- procinfo->prrun.pr_flags |= PRCFAULT | PRCSIG;
- if (!procfs_read_status (procinfo))
- {
- /* The LWP has apparently terminated. */
- if (info_verbose)
- printf_filtered ("LWP %d doesn't respond.\n",
- (procinfo->pid >> 16) & 0xffff);
- close_proc_file (procinfo);
- continue;
- }
+#ifdef NEW_PROC_API
+ /* Open map fd. */
+ sprintf (pathname, "/proc/%d/map", pi->pid);
+ if ((map_fd = open (pathname, O_RDONLY)) < 0)
+ proc_error (pi, "proc_iterate_over_mappings (open)", __LINE__);
- /* Don't try to start a process unless it's stopped on an
- `event of interest'. Doing so will cause errors. */
+ /* Make sure it gets closed again. */
+ make_cleanup ((make_cleanup_func) close, (void *) map_fd);
- if ((procinfo->prstatus.pr_flags & PR_ISTOP)
- && ioctl (procinfo->ctl_fd, PIOCRUN, &procinfo->prrun) < 0)
- {
- if (!procfs_read_status (procinfo))
- fprintf_unfiltered(gdb_stderr,
- "procfs_read_status failed, errno=%d\n",
- errno);
- print_sys_errmsg (procinfo->pathname, errno);
- warning ("PIOCRUN failed");
- }
-#endif
- }
- procfs_read_status (procinfo);
- }
-}
+ /* Allocate space for mapping (lifetime only for this function). */
+ map = alloca (sizeof (struct prmap));
-/*
+ /* Now read the mappings from the file,
+ open a file descriptor for those that have a name,
+ and call the callback function. */
+ while (read (map_fd,
+ (void *) map,
+ sizeof (struct prmap)) == sizeof (struct prmap))
+ {
+ char name[MAX_PROC_NAME_SIZE + sizeof (map->pr_mapname)];
-LOCAL FUNCTION
+ if (map->pr_vaddr == 0 && map->pr_size == 0)
+ break; /* sanity */
- procfs_fetch_registers -- fetch current registers from inferior
+ if (map->pr_mapname[0] == 0)
+ {
+ fd = -1; /* no map file */
+ }
+ else
+ {
+ sprintf (name, "/proc/%d/object/%s", pi->pid, map->pr_mapname);
+ /* Note: caller's responsibility to close this fd! */
+ fd = open (name, O_RDONLY);
+ /* Note: we don't test the above call for failure;
+ we just pass the FD on as given. Sometimes there is
+ no file, so the ioctl may return failure, but that's
+ not a problem. */
+ }
-SYNOPSIS
+ /* Stop looping if the callback returns non-zero. */
+ if ((funcstat = (*func) (fd, (CORE_ADDR) map->pr_vaddr)) != 0)
+ break;
+ }
+#else
+ /* Get the number of mapping entries. */
+ if (ioctl (pi->ctl_fd, PIOCNMAP, &nmaps) < 0)
+ proc_error (pi, "proc_iterate_over_mappings (PIOCNMAP)", __LINE__);
+
+ /* Allocate space for mappings (lifetime only this function). */
+ map = (struct prmap *) alloca ((nmaps + 1) * sizeof (struct prmap));
+
+ /* Read in all the mappings. */
+ if (ioctl (pi->ctl_fd, PIOCMAP, map) < 0)
+ proc_error (pi, "proc_iterate_over_mappings (PIOCMAP)", __LINE__);
+
+ /* Now loop through the mappings, open an fd for each, and
+ call the callback function. */
+ for (i = 0;
+ i < nmaps && map[i].pr_size != 0;
+ i++)
+ {
+ /* Note: caller's responsibility to close this fd! */
+ fd = ioctl (pi->ctl_fd, PIOCOPENM, &map[i].pr_vaddr);
+ /* Note: we don't test the above call for failure;
+ we just pass the FD on as given. Sometimes there is
+ no file, so the ioctl may return failure, but that's
+ not a problem. */
+
+ /* Stop looping if the callback returns non-zero. */
+ if ((funcstat = (*func) (fd, (CORE_ADDR) map[i].pr_vaddr)) != 0)
+ break;
+ }
+#endif
- void procfs_fetch_registers (int regno)
+ return funcstat;
+}
-DESCRIPTION
+#ifdef TM_I386SOL2_H /* Is it hokey to use this? */
- Read the current values of the inferior's registers, both the
- general register set and floating point registers (if supported)
- and update gdb's idea of their current values.
+#include <sys/sysi86.h>
-*/
+/*
+ * Function: proc_get_LDT_entry
+ *
+ * Inputs:
+ * procinfo *pi;
+ * int key;
+ *
+ * The 'key' is actually the value of the lower 16 bits of
+ * the GS register for the LWP that we're interested in.
+ *
+ * Return: matching ssh struct (LDT entry).
+ */
-static void
-procfs_fetch_registers (regno)
- int regno;
+struct ssd *
+proc_get_LDT_entry (pi, key)
+ procinfo *pi;
+ int key;
{
- struct procinfo *pi;
+ static struct ssd *ldt_entry = NULL;
+#ifdef NEW_PROC_API
+ char pathname[MAX_PROC_NAME_SIZE];
+ struct cleanup *old_chain = NULL;
+ int fd;
+
+ /* Allocate space for one LDT entry.
+ This alloc must persist, because we return a pointer to it. */
+ if (ldt_entry == NULL)
+ ldt_entry = (struct ssd *) xmalloc (sizeof (struct ssd));
+
+ /* Open the file descriptor for the LDT table. */
+ sprintf (pathname, "/proc/%d/ldt", pi->pid);
+ if ((fd = open (pathname, O_RDONLY)) < 0)
+ {
+ proc_warn (pi, "proc_get_LDT_entry (open)", __LINE__);
+ return NULL;
+ }
+ /* Make sure it gets closed again! */
+ old_chain = make_cleanup ((make_cleanup_func) close, (void *) fd);
- pi = current_procinfo;
+ /* Now 'read' thru the table, find a match and return it. */
+ while (read (fd, ldt_entry, sizeof (struct ssd)) == sizeof (struct ssd))
+ {
+ if (ldt_entry->sel == 0 &&
+ ldt_entry->bo == 0 &&
+ ldt_entry->acc1 == 0 &&
+ ldt_entry->acc2 == 0)
+ break; /* end of table */
+ /* If key matches, return this entry. */
+ if (ldt_entry->sel == key)
+ return ldt_entry;
+ }
+ /* Loop ended, match not found. */
+ return NULL;
+#else
+ int nldt, i;
+ static int nalloc = 0;
-#ifdef UNIXWARE
- if (procfs_read_status (pi))
+ /* Get the number of LDT entries. */
+ if (ioctl (pi->ctl_fd, PIOCNLDT, &nldt) < 0)
{
- supply_gregset (&pi->prstatus.pr_lwp.pr_context.uc_mcontext.gregs);
-#if defined (FP0_REGNUM)
- supply_fpregset (&pi->prstatus.pr_lwp.pr_context.uc_mcontext.fpregs);
-#endif
+ proc_warn (pi, "proc_get_LDT_entry (PIOCNLDT)", __LINE__);
+ return NULL;
}
-#else /* UNIXWARE */
- if (ioctl (pi->ctl_fd, PIOCGREG, &pi->gregset.gregset) != -1)
+
+ /* Allocate space for the number of LDT entries. */
+ /* This alloc has to persist, 'cause we return a pointer to it. */
+ if (nldt > nalloc)
{
- supply_gregset (&pi->gregset.gregset);
+ ldt_entry = (struct ssd *)
+ xrealloc (ldt_entry, (nldt + 1) * sizeof (struct ssd));
+ nalloc = nldt;
}
-#if defined (FP0_REGNUM)
- if (ioctl (pi->ctl_fd, PIOCGFPREG, &pi->fpregset.fpregset) != -1)
+
+ /* Read the whole table in one gulp. */
+ if (ioctl (pi->ctl_fd, PIOCLDT, ldt_entry) < 0)
{
- supply_fpregset (&pi->fpregset.fpregset);
+ proc_warn (pi, "proc_get_LDT_entry (PIOCLDT)", __LINE__);
+ return NULL;
}
-#endif
-#endif /* UNIXWARE */
-}
-/*
+ /* Search the table and return the (first) entry matching 'key'. */
+ for (i = 0; i < nldt; i++)
+ if (ldt_entry[i].sel == key)
+ return &ldt_entry[i];
-LOCAL FUNCTION
+ /* Loop ended, match not found. */
+ return NULL;
+#endif
+}
- proc_init_failed - called when /proc access initialization fails
-fails
+#endif /* TM_I386SOL2_H */
-SYNOPSIS
+/* =============== END, non-thread part of /proc "MODULE" =============== */
- static void proc_init_failed (struct procinfo *pi,
- char *why, int kill_p)
+/* =================== Thread "MODULE" =================== */
-DESCRIPTION
+/* NOTE: you'll see more ifdefs and duplication of functions here,
+ since there is a different way to do threads on every OS. */
- This function is called whenever initialization of access to a /proc
- entry fails. It prints a suitable error message, does some cleanup,
- and then invokes the standard error processing routine which dumps
- us back into the command loop. If KILL_P is true, sends SIGKILL.
+/*
+ * Function: proc_get_nthreads
+ *
+ * Return the number of threads for the process
*/
-static void
-proc_init_failed (pi, why, kill_p)
- struct procinfo *pi;
- char *why;
- int kill_p;
+#if defined (PIOCNTHR) && defined (PIOCTLIST)
+/*
+ * OSF version
+ */
+int
+proc_get_nthreads (pi)
+ procinfo *pi;
{
- print_sys_errmsg (pi->pathname, errno);
- if (kill_p)
- kill (pi->pid, SIGKILL);
- close_proc_file (pi);
- error (why);
- /* NOTREACHED */
+ int nthreads = 0;
+
+ if (ioctl (pi->ctl_fd, PIOCNTHR, &nthreads) < 0)
+ proc_warn (pi, "procfs: PIOCNTHR failed", __LINE__);
+
+ return nthreads;
}
+#else
+#if defined (SYS_lwpcreate) || defined (SYS_lwp_create) /* FIXME: multiple */
/*
+ * Solaris and Unixware version
+ */
+int
+proc_get_nthreads (pi)
+ procinfo *pi;
+{
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0;
-LOCAL FUNCTION
+ /*
+ * NEW_PROC_API: only works for the process procinfo,
+ * because the LWP procinfos do not get prstatus filled in.
+ */
+#ifdef NEW_PROC_API
+ if (pi->tid != 0) /* find the parent process procinfo */
+ pi = find_procinfo_or_die (pi->pid, 0);
+#endif
+ return pi->prstatus.pr_nlwp;
+}
- close_proc_file - close any currently open /proc entry
+#else
+/*
+ * Default version
+ */
+int
+proc_get_nthreads (pi)
+ procinfo *pi;
+{
+ return 0;
+}
+#endif
+#endif
-SYNOPSIS
+/*
+ * Function: proc_get_current_thread (LWP version)
+ *
+ * Return the ID of the thread that had an event of interest.
+ * (ie. the one that hit a breakpoint or other traced event).
+ * All other things being equal, this should be the ID of a
+ * thread that is currently executing.
+ */
- static void close_proc_file (struct procinfo *pip)
+#if defined (SYS_lwpcreate) || defined (SYS_lwp_create) /* FIXME: multiple */
+/*
+ * Solaris and Unixware version
+ */
+int
+proc_get_current_thread (pi)
+ procinfo *pi;
+{
+ /*
+ * Note: this should be applied to the root procinfo for the process,
+ * not to the procinfo for an LWP. If applied to the procinfo for
+ * an LWP, it will simply return that LWP's ID. In that case,
+ * find the parent process procinfo.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-DESCRIPTION
+ if (!pi->status_valid)
+ if (!proc_get_status (pi))
+ return 0;
- Close any currently open /proc entry and mark the process information
- entry as invalid. In order to ensure that we don't try to reuse any
- stale information, the pid, fd, and pathnames are explicitly
- invalidated, which may be overkill.
+#ifdef NEW_PROC_API
+ return pi->prstatus.pr_lwp.pr_lwpid;
+#else
+ return pi->prstatus.pr_who;
+#endif
+}
+#else
+#if defined (PIOCNTHR) && defined (PIOCTLIST)
+/*
+ * OSF version
*/
-
-static void
-close_proc_file (pip)
- struct procinfo *pip;
+int
+proc_get_current_thread (pi)
+ procinfo *pi;
{
- struct procinfo *procinfo;
+#if 0 /* FIXME: not ready for prime time? */
+ return pi->prstatus.pr_tid;
+#else
+ return 0;
+#endif
+}
- delete_thread (pip->pid); /* remove thread from GDB's thread list */
- remove_fd (pip); /* Remove fd from poll/select list */
+#else
+/*
+ * Default version
+ */
+int
+proc_get_current_thread (pi)
+ procinfo *pi;
+{
+ return 0;
+}
- close (pip->ctl_fd);
-#ifdef HAVE_MULTIPLE_PROC_FDS
- close (pip->as_fd);
- close (pip->status_fd);
- close (pip->map_fd);
+#endif
#endif
- free (pip -> pathname);
-
- /* Unlink pip from the procinfo chain. Note pip might not be on the list. */
+/*
+ * Function: proc_update_threads
+ *
+ * Discover the IDs of all the threads within the process, and
+ * create a procinfo for each of them (chained to the parent).
+ *
+ * This unfortunately requires a different method on every OS.
+ *
+ * Return: non-zero for success, zero for failure.
+ */
- if (procinfo_list == pip)
- procinfo_list = pip->next;
- else
+int
+proc_delete_dead_threads (parent, thread, ignore)
+ procinfo *parent;
+ procinfo *thread;
+ void *ignore;
+{
+ if (thread && parent) /* sanity */
{
- for (procinfo = procinfo_list; procinfo; procinfo = procinfo->next)
- {
- if (procinfo->next == pip)
- {
- procinfo->next = pip->next;
- break;
- }
- }
- free (pip);
+ thread->status_valid = 0;
+ if (!proc_get_status (thread))
+ destroy_one_procinfo (&parent->thread_list, thread);
}
+ return 0; /* keep iterating */
}
+#if defined (PIOCLSTATUS)
/*
+ * Solaris 2.5 (ioctl) version
+ */
+int
+proc_update_threads (pi)
+ procinfo *pi;
+{
+ gdb_prstatus_t *prstatus;
+ struct cleanup *old_chain = NULL;
+ procinfo *thread;
+ int nlwp, i;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
-LOCAL FUNCTION
-
- open_proc_file - open a /proc entry for a given process id
-
-SYNOPSIS
+ proc_iterate_over_threads (pi, proc_delete_dead_threads, NULL);
- static int open_proc_file (int pid, struct procinfo *pip, int mode)
+ if ((nlwp = proc_get_nthreads (pi)) <= 1)
+ return 1; /* Process is not multi-threaded; nothing to do. */
-DESCRIPTION
+ if ((prstatus = (gdb_prstatus_t *)
+ malloc (sizeof (gdb_prstatus_t) * (nlwp + 1))) == 0)
+ perror_with_name ("procfs: malloc failed in update_threads");
- Given a process id and a mode, close the existing open /proc
- entry (if any) and open one for the new process id, in the
- specified mode. Once it is open, then mark the local process
- information structure as valid, which guarantees that the pid,
- fd, and pathname fields match an open /proc entry. Returns
- zero if the open fails, nonzero otherwise.
+ old_chain = make_cleanup (free, prstatus);
+ if (ioctl (pi->ctl_fd, PIOCLSTATUS, prstatus) < 0)
+ proc_error (pi, "update_threads (PIOCLSTATUS)", __LINE__);
- Note that the pathname is left intact, even when the open fails,
- so that callers can use it to construct meaningful error messages
- rather than just "file open failed".
+ /* Skip element zero, which represents the process as a whole. */
+ for (i = 1; i < nlwp + 1; i++)
+ {
+ if ((thread = create_procinfo (pi->pid, prstatus[i].pr_who)) == NULL)
+ proc_error (pi, "update_threads, create_procinfo", __LINE__);
- Note that for Solaris, the process-id also includes an LWP-id, so we
- actually attempt to open that. If we are handed a pid with a 0 LWP-id,
- then we will ask the kernel what it is and add it to the pid. Hence,
- the pid can be changed by us.
+ memcpy (&thread->prstatus, &prstatus[i], sizeof (*prstatus));
+ thread->status_valid = 1;
+ }
+ pi->threads_valid = 1;
+ do_cleanups (old_chain);
+ return 1;
+}
+#else
+#ifdef NEW_PROC_API
+/*
+ * Unixware and Solaris 6 (and later) version
*/
-
-static int
-open_proc_file (pid, pip, mode, control)
- int pid;
- struct procinfo *pip;
- int mode;
- int control;
+int
+proc_update_threads (pi)
+ procinfo *pi;
{
- int tmp, tmpfd;
+ char pathname[MAX_PROC_NAME_SIZE + 16];
+ struct dirent *direntry;
+ struct cleanup *old_chain = NULL;
+ procinfo *thread;
+ DIR *dirp;
+ int lwpid;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
+
+ proc_iterate_over_threads (pi, proc_delete_dead_threads, NULL);
+
+ /*
+ * Unixware
+ *
+ * Note: this brute-force method is the only way I know of
+ * to accomplish this task on Unixware. This method will
+ * also work on Solaris 2.6 and 2.7. There is a much simpler
+ * and more elegant way to do this on Solaris, but the margins
+ * of this manuscript are too small to write it here... ;-)
+ */
+
+ strcpy (pathname, pi->pathname);
+ strcat (pathname, "/lwp");
+ if ((dirp = opendir (pathname)) == NULL)
+ proc_error (pi, "update_threads, opendir", __LINE__);
+
+ old_chain = make_cleanup ((make_cleanup_func) closedir, dirp);
+ while ((direntry = readdir (dirp)) != NULL)
+ if (direntry->d_name[0] != '.') /* skip '.' and '..' */
+ {
+ lwpid = atoi (&direntry->d_name[0]);
+ if ((thread = create_procinfo (pi->pid, lwpid)) == NULL)
+ proc_error (pi, "update_threads, create_procinfo", __LINE__);
+ }
+ pi->threads_valid = 1;
+ do_cleanups (old_chain);
+ return 1;
+}
+#else
+#ifdef PIOCTLIST
+/*
+ * OSF version
+ */
+int
+proc_update_threads (pi)
+ procinfo *pi;
+{
+ int nthreads, i;
+ tid_t *threads;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- pip -> next = NULL;
- pip -> had_event = 0;
- pip -> pathname = xmalloc (MAX_PROC_NAME_SIZE);
- pip -> pid = pid;
+ proc_iterate_over_threads (pi, proc_delete_dead_threads, NULL);
-#ifndef PIOCOPENLWP
- tmp = pid;
-#else
- tmp = pid & 0xffff;
-#endif
+ nthreads = proc_get_nthreads (pi);
+ if (nthreads < 2)
+ return 0; /* nothing to do for 1 or fewer threads */
-#ifdef HAVE_MULTIPLE_PROC_FDS
- sprintf (pip->pathname, STATUS_PROC_NAME_FMT, tmp);
- if ((pip->status_fd = open (pip->pathname, O_RDONLY)) < 0)
- {
- return 0;
- }
+ if ((threads = malloc (nthreads * sizeof (tid_t))) == NULL)
+ proc_error (pi, "update_threads, malloc", __LINE__);
+
+ if (ioctl (pi->ctl_fd, PIOCTLIST, threads) < 0)
+ proc_error (pi, "procfs: update_threads (PIOCTLIST)", __LINE__);
- sprintf (pip->pathname, AS_PROC_NAME_FMT, tmp);
- if ((pip->as_fd = open (pip->pathname, O_RDWR)) < 0)
+ for (i = 0; i < nthreads; i++)
{
- close (pip->status_fd);
- return 0;
+ if (!find_procinfo (pi->pid, threads[i]))
+ if (!create_procinfo (pi->pid, threads[i]))
+ proc_error (pi, "update_threads, create_procinfo", __LINE__);
}
+ pi->threads_valid = 1;
+ return 1;
+}
+#else
+/*
+ * Default version
+ */
+int
+proc_update_threads (pi)
+ procinfo *pi;
+{
+ return 0;
+}
+#endif /* OSF PIOCTLIST */
+#endif /* NEW_PROC_API */
+#endif /* SOL 2.5 PIOCLSTATUS */
- sprintf (pip->pathname, MAP_PROC_NAME_FMT, tmp);
- if ((pip->map_fd = open (pip->pathname, O_RDONLY)) < 0)
- {
- close (pip->status_fd);
- close (pip->as_fd);
- return 0;
- }
+/*
+ * Function: proc_iterate_over_threads
+ *
+ * Description:
+ * Given a pointer to a function, call that function once
+ * for each lwp in the procinfo list, until the function
+ * returns non-zero, in which event return the value
+ * returned by the function.
+ *
+ * Note: this function does NOT call update_threads.
+ * If you want to discover new threads first, you must
+ * call that function explicitly. This function just makes
+ * a quick pass over the currently-known procinfos.
+ *
+ * Arguments:
+ * pi - parent process procinfo
+ * func - per-thread function
+ * ptr - opaque parameter for function.
+ *
+ * Return:
+ * First non-zero return value from the callee, or zero.
+ */
+
+int
+proc_iterate_over_threads (pi, func, ptr)
+ procinfo *pi;
+ int (*func) PARAMS ((procinfo *, procinfo *, void *));
+ void *ptr;
+{
+ procinfo *thread, *next;
+ int retval = 0;
+
+ /*
+ * We should never have to apply this operation to any procinfo
+ * except the one for the main process. If that ever changes
+ * for any reason, then take out the following clause and
+ * replace it with one that makes sure the ctl_fd is open.
+ */
+
+ if (pi->tid != 0)
+ pi = find_procinfo_or_die (pi->pid, 0);
- if (control)
+ for (thread = pi->thread_list; thread != NULL; thread = next)
{
- sprintf (pip->pathname, CTL_PROC_NAME_FMT, tmp);
- if ((pip->ctl_fd = open (pip->pathname, O_WRONLY)) < 0)
- {
- close (pip->status_fd);
- close (pip->as_fd);
- close (pip->map_fd);
- return 0;
- }
+ next = thread->next; /* in case thread is destroyed */
+ if ((retval = (*func) (pi, thread, ptr)) != 0)
+ break;
}
-#else /* HAVE_MULTIPLE_PROC_FDS */
- sprintf (pip -> pathname, CTL_PROC_NAME_FMT, tmp);
+ return retval;
+}
- if ((tmpfd = open (pip -> pathname, mode)) < 0)
- return 0;
+/* =================== END, Thread "MODULE" =================== */
-#ifndef PIOCOPENLWP
- pip -> ctl_fd = tmpfd;
- pip -> as_fd = tmpfd;
- pip -> map_fd = tmpfd;
- pip -> status_fd = tmpfd;
-#else
- tmp = (pid >> 16) & 0xffff; /* Extract thread id */
+/* =================== END, /proc "MODULE" =================== */
- if (tmp == 0)
- { /* Don't know thread id yet */
- if (ioctl (tmpfd, PIOCSTATUS, &pip -> prstatus) < 0)
- {
- print_sys_errmsg (pip -> pathname, errno);
- close (tmpfd);
- error ("open_proc_file: PIOCSTATUS failed");
- }
+/* =================== GDB "MODULE" =================== */
- tmp = pip -> prstatus.pr_who; /* Get thread id from prstatus_t */
- pip -> pid = (tmp << 16) | pid; /* Update pip */
- }
+/*
+ * Here are all of the gdb target vector functions and their friends.
+ */
- if ((pip -> ctl_fd = ioctl (tmpfd, PIOCOPENLWP, &tmp)) < 0)
- {
- close (tmpfd);
- return 0;
- }
+static int do_attach PARAMS ((int pid));
+static void do_detach PARAMS ((int signo));
+static int register_gdb_signals PARAMS ((procinfo *, sigset_t *));
-#ifdef PIOCSET /* New method */
- {
- long pr_flags;
- pr_flags = PR_ASYNC;
- ioctl (pip -> ctl_fd, PIOCSET, &pr_flags);
- }
+/*
+ * Function: procfs_debug_inferior
+ *
+ * Sets up the inferior to be debugged.
+ * Registers to trace signals, hardware faults, and syscalls.
+ * Note: does not set RLC flag: caller may want to customize that.
+ *
+ * Returns: zero for success (note! unlike most functions in this module)
+ * On failure, returns the LINE NUMBER where it failed!
+ */
+
+static int
+procfs_debug_inferior (pi)
+ procinfo *pi;
+{
+ fltset_t traced_faults;
+ sigset_t traced_signals;
+ sysset_t traced_syscall_entries;
+ sysset_t traced_syscall_exits;
+
+#ifdef PROCFS_DONT_TRACE_FAULTS
+ /* On some systems (OSF), we don't trace hardware faults.
+ Apparently it's enough that we catch them as signals.
+ Wonder why we don't just do that in general? */
+ premptyset (&traced_faults); /* don't trace faults. */
+#else
+ /* Register to trace hardware faults in the child. */
+ prfillset (&traced_faults); /* trace all faults... */
+ prdelset (&traced_faults, FLTPAGE); /* except page fault. */
#endif
+ if (!proc_set_traced_faults (pi, &traced_faults))
+ return __LINE__;
- /* keep extra fds in sync */
- pip->as_fd = pip->ctl_fd;
- pip->map_fd = pip->ctl_fd;
- pip->status_fd = pip->ctl_fd;
+ /* Register to trace selected signals in the child. */
+ premptyset (&traced_signals);
+ if (!register_gdb_signals (pi, &traced_signals))
+ return __LINE__;
- close (tmpfd); /* All done with main pid */
-#endif /* PIOCOPENLWP */
+ /* Register to trace the 'exit' system call (on entry). */
+ premptyset (&traced_syscall_entries);
+ praddset (&traced_syscall_entries, SYS_exit);
+#ifdef SYS_lwpexit
+ praddset (&traced_syscall_entries, SYS_lwpexit); /* And _lwp_exit... */
+#endif
+#ifdef SYS_lwp_exit
+ praddset (&traced_syscall_entries, SYS_lwp_exit);
+#endif
-#endif /* HAVE_MULTIPLE_PROC_FDS */
+ if (!proc_set_traced_sysentry (pi, &traced_syscall_entries))
+ return __LINE__;
- return 1;
-}
+#ifdef PRFS_STOPEXEC /* defined on OSF */
+ /* OSF method for tracing exec syscalls. Quoting:
+ Under Alpha OSF/1 we have to use a PIOCSSPCACT ioctl to trace
+ exits from exec system calls because of the user level loader. */
+ /* FIXME: make nice and maybe move into an access function. */
+ {
+ int prfs_flags;
-static char *
-mappingflags (flags)
- long flags;
-{
- static char asciiflags[8];
-
- strcpy (asciiflags, "-------");
-#if defined (MA_PHYS)
- if (flags & MA_PHYS) asciiflags[0] = 'd';
-#endif
- if (flags & MA_STACK) asciiflags[1] = 's';
- if (flags & MA_BREAK) asciiflags[2] = 'b';
- if (flags & MA_SHARED) asciiflags[3] = 's';
- if (flags & MA_READ) asciiflags[4] = 'r';
- if (flags & MA_WRITE) asciiflags[5] = 'w';
- if (flags & MA_EXEC) asciiflags[6] = 'x';
- return (asciiflags);
-}
+ if (ioctl (pi->ctl_fd, PIOCGSPCACT, &prfs_flags) < 0)
+ return __LINE__;
-static void
-info_proc_flags (pip, summary)
- struct procinfo *pip;
- int summary;
-{
- struct trans *transp;
-#ifdef UNIXWARE
- long flags = pip->prstatus.pr_flags | pip->prstatus.pr_lwp.pr_flags;
-#else
- long flags = pip->prstatus.pr_flags;
-#endif
+ prfs_flags |= PRFS_STOPEXEC;
- printf_filtered ("%-32s", "Process status flags:");
- if (!summary)
- {
- printf_filtered ("\n\n");
- }
- for (transp = pr_flag_table; transp -> name != NULL; transp++)
- {
- if (flags & transp -> value)
- {
- if (summary)
- {
- printf_filtered ("%s ", transp -> name);
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n", transp -> name, transp -> desc);
- }
- }
- }
- printf_filtered ("\n");
-}
+ if (ioctl (pi->ctl_fd, PIOCSSPCACT, &prfs_flags) < 0)
+ return __LINE__;
+ }
+#else /* not PRFS_STOPEXEC */
+ /* Everyone else's (except OSF) method for tracing exec syscalls */
+ /* GW: Rationale...
+ Not all systems with /proc have all the exec* syscalls with the same
+ names. On the SGI, for example, there is no SYS_exec, but there
+ *is* a SYS_execv. So, we try to account for that. */
-static void
-info_proc_stop (pip, summary)
- struct procinfo *pip;
- int summary;
-{
- struct trans *transp;
- int why;
- int what;
+ premptyset (&traced_syscall_exits);
+#ifdef SYS_exec
+ praddset (&traced_syscall_exits, SYS_exec);
+#endif
+#ifdef SYS_execve
+ praddset (&traced_syscall_exits, SYS_execve);
+#endif
+#ifdef SYS_execv
+ praddset (&traced_syscall_exits, SYS_execv);
+#endif
- why = THE_PR_LWP(pip->prstatus).pr_why;
- what = THE_PR_LWP(pip->prstatus).pr_what;
+#ifdef SYS_lwpcreate
+ praddset (&traced_syscall_exits, SYS_lwpcreate);
+ praddset (&traced_syscall_exits, SYS_lwpexit);
+#endif
- if (THE_PR_LWP(pip->prstatus).pr_flags & PR_STOPPED)
- {
- printf_filtered ("%-32s", "Reason for stopping:");
- if (!summary)
- {
- printf_filtered ("\n\n");
- }
- for (transp = pr_why_table; transp -> name != NULL; transp++)
- {
- if (why == transp -> value)
- {
- if (summary)
- {
- printf_filtered ("%s ", transp -> name);
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n",
- transp -> name, transp -> desc);
- }
- break;
- }
- }
-
- /* Use the pr_why field to determine what the pr_what field means, and
- print more information. */
-
- switch (why)
- {
- case PR_REQUESTED:
- /* pr_what is unused for this case */
- break;
- case PR_JOBCONTROL:
- case PR_SIGNALLED:
- if (summary)
- {
- printf_filtered ("%s ", signalname (what));
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n", signalname (what),
- safe_strsignal (what));
- }
- break;
- case PR_SYSENTRY:
- if (summary)
- {
- printf_filtered ("%s ", syscallname (what));
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n", syscallname (what),
- "Entered this system call");
- }
- break;
- case PR_SYSEXIT:
- if (summary)
- {
- printf_filtered ("%s ", syscallname (what));
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n", syscallname (what),
- "Returned from this system call");
- }
- break;
- case PR_FAULTED:
- if (summary)
- {
- printf_filtered ("%s ",
- lookupname (faults_table, what, "fault"));
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n",
- lookupname (faults_table, what, "fault"),
- lookupdesc (faults_table, what));
- }
- break;
- }
- printf_filtered ("\n");
- }
-}
+#ifdef SYS_lwp_create /* FIXME: once only, please */
+ praddset (&traced_syscall_exits, SYS_lwp_create);
+ praddset (&traced_syscall_exits, SYS_lwp_exit);
+#endif
-static void
-info_proc_siginfo (pip, summary)
- struct procinfo *pip;
- int summary;
-{
- struct siginfo *sip;
- if ((THE_PR_LWP(pip->prstatus).pr_flags & PR_STOPPED) &&
- (THE_PR_LWP(pip->prstatus).pr_why == PR_SIGNALLED ||
- THE_PR_LWP(pip->prstatus).pr_why == PR_FAULTED))
- {
- printf_filtered ("%-32s", "Additional signal/fault info:");
- sip = &(THE_PR_LWP(pip->prstatus).pr_info);
- if (summary)
- {
- printf_filtered ("%s ", signalname (sip -> si_signo));
- if (sip -> si_errno > 0)
- {
- printf_filtered ("%s ", errnoname (sip -> si_errno));
- }
- if (sip -> si_code <= 0)
- {
- printf_filtered ("sent by %s, uid %d ",
- target_pid_to_str (sip -> si_pid),
- sip -> si_uid);
- }
- else
- {
- printf_filtered ("%s ", sigcodename (sip));
- if ((sip -> si_signo == SIGILL) ||
- (sip -> si_signo == SIGFPE) ||
- (sip -> si_signo == SIGSEGV) ||
- (sip -> si_signo == SIGBUS))
- {
- printf_filtered ("addr=%#lx ",
- (unsigned long) sip -> si_addr);
- }
- else if ((sip -> si_signo == SIGCHLD))
- {
- printf_filtered ("child %s, status %u ",
- target_pid_to_str (sip -> si_pid),
- sip -> si_status);
- }
- else if ((sip -> si_signo == SIGPOLL))
- {
- printf_filtered ("band %u ", sip -> si_band);
- }
- }
- }
- else
- {
- printf_filtered ("\n\n");
- printf_filtered ("\t%-16s %s.\n", signalname (sip -> si_signo),
- safe_strsignal (sip -> si_signo));
- if (sip -> si_errno > 0)
- {
- printf_filtered ("\t%-16s %s.\n",
- errnoname (sip -> si_errno),
- safe_strerror (sip -> si_errno));
- }
- if (sip -> si_code <= 0)
- {
- printf_filtered ("\t%-16u %s\n", sip -> si_pid, /* XXX need target_pid_to_str() */
- "PID of process sending signal");
- printf_filtered ("\t%-16u %s\n", sip -> si_uid,
- "UID of process sending signal");
- }
- else
- {
- printf_filtered ("\t%-16s %s.\n", sigcodename (sip),
- sigcodedesc (sip));
- if ((sip -> si_signo == SIGILL) ||
- (sip -> si_signo == SIGFPE))
- {
- printf_filtered ("\t%#-16lx %s.\n",
- (unsigned long) sip -> si_addr,
- "Address of faulting instruction");
- }
- else if ((sip -> si_signo == SIGSEGV) ||
- (sip -> si_signo == SIGBUS))
- {
- printf_filtered ("\t%#-16lx %s.\n",
- (unsigned long) sip -> si_addr,
- "Address of faulting memory reference");
- }
- else if ((sip -> si_signo == SIGCHLD))
- {
- printf_filtered ("\t%-16u %s.\n", sip -> si_pid, /* XXX need target_pid_to_str() */
- "Child process ID");
- printf_filtered ("\t%-16u %s.\n", sip -> si_status,
- "Child process exit value or signal");
- }
- else if ((sip -> si_signo == SIGPOLL))
- {
- printf_filtered ("\t%-16u %s.\n", sip -> si_band,
- "Band event for POLL_{IN,OUT,MSG}");
- }
- }
- }
- printf_filtered ("\n");
- }
+ if (!proc_set_traced_sysexit (pi, &traced_syscall_exits))
+ return __LINE__;
+
+#endif /* PRFS_STOPEXEC */
+ return 0;
}
-static void
-info_proc_syscalls (pip, summary)
- struct procinfo *pip;
- int summary;
+static void
+procfs_attach (args, from_tty)
+ char *args;
+ int from_tty;
{
- int syscallnum;
+ char *exec_file;
+ int pid;
- if (!summary)
- {
+ if (!args)
+ error_no_arg ("process-id to attach");
-#if 0 /* FIXME: Needs to use gdb-wide configured info about system calls. */
- if (pip -> prstatus.pr_flags & PR_ASLEEP)
- {
- int syscallnum = pip -> prstatus.pr_reg[R_D0];
- if (summary)
- {
- printf_filtered ("%-32s", "Sleeping in system call:");
- printf_filtered ("%s", syscallname (syscallnum));
- }
- else
- {
- printf_filtered ("Sleeping in system call '%s'.\n",
- syscallname (syscallnum));
- }
- }
-#endif
+ pid = atoi (args);
+ if (pid == getpid ())
+ error ("Attaching GDB to itself is not a good idea...");
-#ifndef UNIXWARE
- if (ioctl (pip -> ctl_fd, PIOCGENTRY, &pip -> entryset) < 0)
- {
- print_sys_errmsg (pip -> pathname, errno);
- error ("PIOCGENTRY failed");
- }
-
- if (ioctl (pip -> ctl_fd, PIOCGEXIT, &pip -> exitset) < 0)
- {
- print_sys_errmsg (pip -> pathname, errno);
- error ("PIOCGEXIT failed");
- }
-#endif
-
- printf_filtered ("System call tracing information:\n\n");
-
- printf_filtered ("\t%-12s %-8s %-8s\n",
- "System call",
- "Entry",
- "Exit");
- for (syscallnum = 0; syscallnum < MAX_SYSCALLS; syscallnum++)
- {
- QUIT;
- if (syscall_table[syscallnum] != NULL)
- printf_filtered ("\t%-12s ", syscall_table[syscallnum]);
- else
- printf_filtered ("\t%-12d ", syscallnum);
+ if (from_tty)
+ {
+ exec_file = get_exec_file (0);
-#ifdef UNIXWARE
- printf_filtered ("%-8s ",
- prismember (&pip->prstatus.pr_sysentry, syscallnum)
- ? "on" : "off");
- printf_filtered ("%-8s ",
- prismember (&pip->prstatus.pr_sysexit, syscallnum)
- ? "on" : "off");
-#else
- printf_filtered ("%-8s ",
- prismember (&pip -> entryset, syscallnum)
- ? "on" : "off");
- printf_filtered ("%-8s ",
- prismember (&pip -> exitset, syscallnum)
- ? "on" : "off");
-#endif
- printf_filtered ("\n");
- }
- printf_filtered ("\n");
+ if (exec_file)
+ printf_filtered ("Attaching to program `%s', %s\n",
+ exec_file, target_pid_to_str (pid));
+ else
+ printf_filtered ("Attaching to %s\n", target_pid_to_str (pid));
+
+ fflush (stdout);
}
+ inferior_pid = do_attach (pid);
+ push_target (&procfs_ops);
}
-static char *
-signalname (signo)
- int signo;
+static void
+procfs_detach (args, from_tty)
+ char *args;
+ int from_tty;
{
- const char *name;
- static char locbuf[32];
+ char *exec_file;
+ int signo = 0;
- name = strsigno (signo);
- if (name == NULL)
- {
- sprintf (locbuf, "Signal %d", signo);
- }
- else
+ if (from_tty)
{
- sprintf (locbuf, "%s (%d)", name, signo);
+ exec_file = get_exec_file (0);
+ if (exec_file == 0)
+ exec_file = "";
+ printf_filtered ("Detaching from program: %s %s\n",
+ exec_file, target_pid_to_str (inferior_pid));
+ fflush (stdout);
}
- return (locbuf);
+ if (args)
+ signo = atoi (args);
+
+ do_detach (signo);
+ inferior_pid = 0;
+ unpush_target (&procfs_ops); /* Pop out of handling an inferior */
}
-static char *
-errnoname (errnum)
- int errnum;
+static int
+do_attach (pid)
+ int pid;
{
- const char *name;
- static char locbuf[32];
+ procinfo *pi;
+ int fail;
+
+ if ((pi = create_procinfo (pid, 0)) == NULL)
+ perror ("procfs: out of memory in 'attach'");
- name = strerrno (errnum);
- if (name == NULL)
+ if (!open_procinfo_files (pi, FD_CTL))
{
- sprintf (locbuf, "Errno %d", errnum);
+ fprintf_filtered (gdb_stderr, "procfs:%d -- ", __LINE__);
+ sprintf (errmsg, "do_attach: couldn't open /proc file for process %d",
+ pid);
+ dead_procinfo (pi, errmsg, NOKILL);
+ }
+
+ /* Stop the process (if it isn't already stopped). */
+ if (proc_flags (pi) & (PR_STOPPED | PR_ISTOP))
+ {
+ pi->was_stopped = 1;
+ proc_prettyprint_why (proc_why (pi), proc_what (pi), 1);
}
else
{
- sprintf (locbuf, "%s (%d)", name, errnum);
+ pi->was_stopped = 0;
+ /* Set the process to run again when we close it. */
+ if (!proc_set_run_on_last_close (pi))
+ dead_procinfo (pi, "do_attach: couldn't set RLC.", NOKILL);
+
+ /* Now stop the process. */
+ if (!proc_stop_process (pi))
+ dead_procinfo (pi, "do_attach: couldn't stop the process.", NOKILL);
+ pi->ignore_next_sigstop = 1;
}
- return (locbuf);
+ /* Save some of the /proc state to be restored if we detach. */
+ if (!proc_get_traced_faults (pi, &pi->saved_fltset))
+ dead_procinfo (pi, "do_attach: couldn't save traced faults.", NOKILL);
+ if (!proc_get_traced_signals (pi, &pi->saved_sigset))
+ dead_procinfo (pi, "do_attach: couldn't save traced signals.", NOKILL);
+ if (!proc_get_traced_sysentry (pi, &pi->saved_entryset))
+ dead_procinfo (pi, "do_attach: couldn't save traced syscall entries.",
+ NOKILL);
+ if (!proc_get_traced_sysexit (pi, &pi->saved_exitset))
+ dead_procinfo (pi, "do_attach: couldn't save traced syscall exits.",
+ NOKILL);
+ if (!proc_get_held_signals (pi, &pi->saved_sighold))
+ dead_procinfo (pi, "do_attach: couldn't save held signals.", NOKILL);
+
+ if ((fail = procfs_debug_inferior (pi)) != 0)
+ dead_procinfo (pi, "do_attach: failed in procfs_debug_inferior", NOKILL);
+
+ /* Let GDB know that the inferior was attached. */
+ attach_flag = 1;
+ return MERGEPID (pi->pid, proc_get_current_thread (pi));
}
static void
-info_proc_signals (pip, summary)
- struct procinfo *pip;
- int summary;
+do_detach (signo)
+ int signo;
{
- int signo;
+ procinfo *pi;
- if (!summary)
- {
-#ifndef PROCFS_USE_READ_WRITE
- if (ioctl (pip -> ctl_fd, PIOCGTRACE, &pip -> trace) < 0)
- {
- print_sys_errmsg (pip -> pathname, errno);
- error ("PIOCGTRACE failed");
- }
-#endif
-
- printf_filtered ("Disposition of signals:\n\n");
- printf_filtered ("\t%-15s %-8s %-8s %-8s %s\n\n",
- "Signal", "Trace", "Hold", "Pending", "Description");
- for (signo = 0; signo < NSIG; signo++)
- {
- QUIT;
- printf_filtered ("\t%-15s ", signalname (signo));
-#ifdef UNIXWARE
- printf_filtered ("%-8s ",
- prismember (&pip -> prstatus.pr_sigtrace, signo)
- ? "on" : "off");
- printf_filtered ("%-8s ",
- prismember (&pip -> prstatus.pr_lwp.pr_context.uc_sigmask, signo)
- ? "on" : "off");
-#else
- printf_filtered ("%-8s ",
- prismember (&pip -> trace, signo)
- ? "on" : "off");
- printf_filtered ("%-8s ",
- prismember (&pip -> prstatus.pr_sighold, signo)
- ? "on" : "off");
-#endif
+ /* Find procinfo for the main process */
+ pi = find_procinfo_or_die (PIDGET (inferior_pid), 0); /* FIXME: threads */
+ if (signo)
+ if (!proc_set_current_signal (pi, signo))
+ proc_warn (pi, "do_detach, set_current_signal", __LINE__);
-#ifdef UNIXWARE
- if (prismember (&pip->prstatus.pr_sigpend, signo) ||
- prismember (&pip->prstatus.pr_lwp.pr_lwppend, signo))
- printf_filtered("%-8s ", "yes");
- else
- printf_filtered("%-8s ", "no");
-#else /* UNIXWARE */
-#ifdef PROCFS_SIGPEND_OFFSET
- /* Alpha OSF/1 numbers the pending signals from 1. */
- printf_filtered ("%-8s ",
- (signo ? prismember (&pip -> prstatus.pr_sigpend,
- signo - 1)
- : 0)
- ? "yes" : "no");
-#else
- printf_filtered ("%-8s ",
- prismember (&pip -> prstatus.pr_sigpend, signo)
- ? "yes" : "no");
-#endif
-#endif /* UNIXWARE */
- printf_filtered (" %s\n", safe_strsignal (signo));
- }
- printf_filtered ("\n");
- }
+ if (!proc_set_traced_signals (pi, &pi->saved_sigset))
+ proc_warn (pi, "do_detach, set_traced_signal", __LINE__);
+
+ if (!proc_set_traced_faults (pi, &pi->saved_fltset))
+ proc_warn (pi, "do_detach, set_traced_faults", __LINE__);
+
+ if (!proc_set_traced_sysentry (pi, &pi->saved_entryset))
+ proc_warn (pi, "do_detach, set_traced_sysentry", __LINE__);
+
+ if (!proc_set_traced_sysexit (pi, &pi->saved_exitset))
+ proc_warn (pi, "do_detach, set_traced_sysexit", __LINE__);
+
+ if (!proc_set_held_signals (pi, &pi->saved_sighold))
+ proc_warn (pi, "do_detach, set_held_signals", __LINE__);
+
+ if (signo || (proc_flags (pi) & (PR_STOPPED | PR_ISTOP)))
+ if (signo || !(pi->was_stopped) ||
+ query ("Was stopped when attached, make it runnable again? "))
+ {
+ /* Clear any pending signal. */
+ if (!proc_clear_current_fault (pi))
+ proc_warn (pi, "do_detach, clear_current_fault", __LINE__);
+
+ if (!proc_set_run_on_last_close (pi))
+ proc_warn (pi, "do_detach, set_rlc", __LINE__);
+ }
+
+ attach_flag = 0;
+ destroy_procinfo (pi);
}
+/*
+ * fetch_registers
+ *
+ * Since the /proc interface cannot give us individual registers,
+ * we pay no attention to the (regno) argument, and just fetch them all.
+ * This results in the possibility that we will do unnecessarily many
+ * fetches, since we may be called repeatedly for individual registers.
+ * So we cache the results, and mark the cache invalid when the process
+ * is resumed.
+ */
+
static void
-info_proc_faults (pip, summary)
- struct procinfo *pip;
- int summary;
+procfs_fetch_registers (regno)
+ int regno;
{
- struct trans *transp;
+ gdb_fpregset_t *fpregs;
+ gdb_gregset_t *gregs;
+ procinfo *pi;
+ int pid;
+ int tid;
- if (!summary)
- {
-#ifndef UNIXWARE
- if (ioctl (pip -> ctl_fd, PIOCGFAULT, &pip->fltset.fltset) < 0)
- {
- print_sys_errmsg (pip -> pathname, errno);
- error ("PIOCGFAULT failed");
- }
+ pid = PIDGET (inferior_pid);
+ tid = TIDGET (inferior_pid);
+
+ /* First look up procinfo for the main process. */
+ pi = find_procinfo_or_die (pid, 0);
+
+ /* If the event thread is not the same as GDB's requested thread
+ (ie. inferior_pid), then look up procinfo for the requested
+ thread. */
+ if ((tid != 0) &&
+ (tid != proc_get_current_thread (pi)))
+ pi = find_procinfo_or_die (pid, tid);
+
+ if (pi == NULL)
+ error ("procfs: fetch_registers failed to find procinfo for %s",
+ target_pid_to_str (inferior_pid));
+
+ if ((gregs = proc_get_gregs (pi)) == NULL)
+ proc_error (pi, "fetch_registers, get_gregs", __LINE__);
+
+ supply_gregset (gregs);
+
+#if defined (FP0_REGNUM) /* need floating point? */
+ if ((regno >= 0 && regno < FP0_REGNUM) ||
+ regno == PC_REGNUM ||
+#ifdef NPC_REGNUM
+ regno == NPC_REGNUM ||
#endif
-
- printf_filtered ("Current traced hardware fault set:\n\n");
- printf_filtered ("\t%-12s %-8s\n", "Fault", "Trace");
+ regno == FP_REGNUM ||
+ regno == SP_REGNUM)
+ return; /* not a floating point register */
- for (transp = faults_table; transp -> name != NULL; transp++)
- {
- QUIT;
- printf_filtered ("\t%-12s ", transp -> name);
-#ifdef UNIXWARE
- printf_filtered ("%-8s", prismember (&pip->prstatus.pr_flttrace, transp -> value)
- ? "on" : "off");
-#else
- printf_filtered ("%-8s", prismember (&pip->fltset.fltset, transp -> value)
- ? "on" : "off");
+ if ((fpregs = proc_get_fpregs (pi)) == NULL)
+ proc_error (pi, "fetch_registers, get_fpregs", __LINE__);
+
+ supply_fpregset (fpregs);
#endif
- printf_filtered ("\n");
- }
- printf_filtered ("\n");
- }
}
+/* Get ready to modify the registers array. On machines which store
+ individual registers, this doesn't need to do anything. On
+ machines which store all the registers in one fell swoop, such as
+ /proc, this makes sure that registers contains all the registers
+ from the program being debugged. */
+
static void
-info_proc_mappings (pip, summary)
- struct procinfo *pip;
- int summary;
+procfs_prepare_to_store ()
{
- int nmap;
- struct prmap *prmaps;
- struct prmap *prmap;
- struct stat sbuf;
-
- if (!summary)
- {
- printf_filtered ("Mapped address spaces:\n\n");
-#ifdef BFD_HOST_64_BIT
- printf_filtered (" %18s %18s %10s %10s %7s\n",
-#else
- printf_filtered ("\t%10s %10s %10s %10s %7s\n",
-#endif
- "Start Addr",
- " End Addr",
- " Size",
- " Offset",
- "Flags");
-#ifdef PROCFS_USE_READ_WRITE
- if (fstat (pip->map_fd, &sbuf) == 0)
- {
- nmap = sbuf.st_size / sizeof (prmap_t);
- prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
- if ((lseek (pip->map_fd, 0, SEEK_SET) == 0) &&
- (read (pip->map_fd, (char *) prmaps,
- nmap * sizeof (*prmaps)) == (nmap * sizeof (*prmaps))))
- {
- int i = 0;
- for (prmap = prmaps; i < nmap; ++prmap, ++i)
-#else
- if (ioctl (pip -> ctl_fd, PIOCNMAP, &nmap) == 0)
- {
- prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
- if (ioctl (pip -> ctl_fd, PIOCMAP, prmaps) == 0)
- {
- for (prmap = prmaps; prmap -> pr_size; ++prmap)
-#endif /* PROCFS_USE_READ_WRITE */
- {
-#ifdef BFD_HOST_64_BIT
- printf_filtered (" %#18lx %#18lx %#10x %#10x %7s\n",
-#else
- printf_filtered ("\t%#10lx %#10lx %#10x %#10x %7s\n",
+#ifdef CHILD_PREPARE_TO_STORE
+ CHILD_PREPARE_TO_STORE ();
#endif
- (unsigned long)prmap -> pr_vaddr,
- (unsigned long)prmap -> pr_vaddr
- + prmap -> pr_size - 1,
- prmap -> pr_size,
- prmap -> pr_off,
- mappingflags (prmap -> pr_mflags));
- }
- }
- }
- printf_filtered ("\n");
- }
}
/*
+ * store_registers
+ *
+ * Since the /proc interface will not read individual registers,
+ * we will cache these requests until the process is resumed, and
+ * only then write them back to the inferior process.
+ *
+ * FIXME: is that a really bad idea? Have to think about cases
+ * where writing one register might affect the value of others, etc.
+ */
-LOCAL FUNCTION
-
- info_proc -- implement the "info proc" command
+static void
+procfs_store_registers (regno)
+ int regno;
+{
+ gdb_fpregset_t *fpregs;
+ gdb_gregset_t *gregs;
+ procinfo *pi;
+ int pid;
+ int tid;
-SYNOPSIS
+ pid = PIDGET (inferior_pid);
+ tid = TIDGET (inferior_pid);
- void info_proc (char *args, int from_tty)
+ /* First find procinfo for main process */
+ pi = find_procinfo_or_die (pid, 0);
-DESCRIPTION
+ /* If current lwp for process is not the same as requested thread
+ (ie. inferior_pid), then find procinfo for the requested thread. */
- Implement gdb's "info proc" command by using the /proc interface
- to print status information about any currently running process.
+ if ((tid != 0) &&
+ (tid != proc_get_current_thread (pi)))
+ pi = find_procinfo_or_die (pid, tid);
- Examples of the use of "info proc" are:
+ if (pi == NULL)
+ error ("procfs: store_registers: failed to find procinfo for %s",
+ target_pid_to_str (inferior_pid));
- info proc (prints summary info for current inferior)
- info proc 123 (prints summary info for process with pid 123)
- info proc mappings (prints address mappings)
- info proc times (prints process/children times)
- info proc id (prints pid, ppid, gid, sid, etc)
- FIXME: i proc id not implemented.
- info proc status (prints general process state info)
- FIXME: i proc status not implemented.
- info proc signals (prints info about signal handling)
- info proc all (prints all info)
+ if ((gregs = proc_get_gregs (pi)) == NULL)
+ proc_error (pi, "store_registers, get_gregs", __LINE__);
- */
+ fill_gregset (gregs, regno);
+ if (!proc_set_gregs (pi))
+ proc_error (pi, "store_registers, set_gregs", __LINE__);
-static void
-info_proc (args, from_tty)
- char *args;
- int from_tty;
-{
- int pid;
- struct procinfo *pip;
- struct cleanup *old_chain;
- char **argv;
- int argsize;
- int summary = 1;
- int flags = 0;
- int syscalls = 0;
- int signals = 0;
- int faults = 0;
- int mappings = 0;
- int times = 0;
- int id = 0;
- int status = 0;
- int all = 0;
- int nlwp;
- int *lwps;
+#if defined (FP0_REGNUM) /* need floating point? */
+ if ((regno >= 0 && regno < FP0_REGNUM) ||
+ regno == PC_REGNUM ||
+#ifdef NPC_REGNUM
+ regno == NPC_REGNUM ||
+#endif
+ regno == FP_REGNUM ||
+ regno == SP_REGNUM)
+ return; /* not a floating point register */
- old_chain = make_cleanup (null_cleanup, 0);
+ if ((fpregs = proc_get_fpregs (pi)) == NULL)
+ proc_error (pi, "store_registers, get_fpregs", __LINE__);
- /* Default to using the current inferior if no pid specified. Note
- that inferior_pid may be 0, hence we set okerr. */
+ fill_fpregset (fpregs, regno);
+ if (!proc_set_fpregs (pi))
+ proc_error (pi, "store_registers, set_fpregs", __LINE__);
+#endif
+}
- pid = inferior_pid & 0x7fffffff; /* strip off sol-thread bit */
- if (!(pip = find_procinfo (pid, 1))) /* inferior_pid no good? */
- pip = procinfo_list; /* take first available */
- pid = pid & 0xffff; /* extract "real" pid */
+/*
+ * Function: target_wait
+ *
+ * Retrieve the next stop event from the child process.
+ * If child has not stopped yet, wait for it to stop.
+ * Translate /proc eventcodes (or possibly wait eventcodes)
+ * into gdb internal event codes.
+ *
+ * Return: id of process (and possibly thread) that incurred the event.
+ * event codes are returned thru a pointer parameter.
+ */
- if (args != NULL)
+static int
+procfs_wait (pid, status)
+ int pid;
+ struct target_waitstatus *status;
+{
+ /* First cut: loosely based on original version 2.1 */
+ procinfo *pi;
+ int temp, wstat;
+ int retval;
+ int why, what, flags;
+ int retry = 0;
+
+wait_again:
+
+ retry++;
+ wstat = 0;
+ retval = -1;
+
+ /* Find procinfo for main process */
+ pi = find_procinfo_or_die (PIDGET (inferior_pid), 0);
+ if (pi)
{
- if ((argv = buildargv (args)) == NULL)
- {
- nomem (0);
- }
- make_cleanup (freeargv, (char *) argv);
-
- while (*argv != NULL)
+ /* We must assume that the status is stale now... */
+ pi->status_valid = 0;
+ pi->gregs_valid = 0;
+ pi->fpregs_valid = 0;
+
+#if 0 /* just try this out... */
+ flags = proc_flags (pi);
+ why = proc_why (pi);
+ if ((flags & PR_STOPPED) && (why == PR_REQUESTED))
+ pi->status_valid = 0; /* re-read again, IMMEDIATELY... */
+#endif
+ /* If child is not stopped, wait for it to stop. */
+ if (!(proc_flags (pi) & (PR_STOPPED | PR_ISTOP)) &&
+ !proc_wait_for_stop (pi))
{
- argsize = strlen (*argv);
- if (argsize >= 1 && strncmp (*argv, "all", argsize) == 0)
- {
- summary = 0;
- all = 1;
- }
- else if (argsize >= 2 && strncmp (*argv, "faults", argsize) == 0)
- {
- summary = 0;
- faults = 1;
- }
- else if (argsize >= 2 && strncmp (*argv, "flags", argsize) == 0)
- {
- summary = 0;
- flags = 1;
- }
- else if (argsize >= 1 && strncmp (*argv, "id", argsize) == 0)
- {
- summary = 0;
- id = 1;
- }
- else if (argsize >= 1 && strncmp (*argv, "mappings", argsize) == 0)
- {
- summary = 0;
- mappings = 1;
- }
- else if (argsize >= 2 && strncmp (*argv, "signals", argsize) == 0)
- {
- summary = 0;
- signals = 1;
- }
- else if (argsize >= 2 && strncmp (*argv, "status", argsize) == 0)
- {
- summary = 0;
- status = 1;
- }
- else if (argsize >= 2 && strncmp (*argv, "syscalls", argsize) == 0)
+ /* wait_for_stop failed: has the child terminated? */
+ if (errno == ENOENT)
{
- summary = 0;
- syscalls = 1;
+ /* /proc file not found; presumably child has terminated. */
+ retval = wait (&wstat); /* "wait" for the child's exit */
+
+ if (retval != PIDGET (inferior_pid)) /* wrong child? */
+ error ("procfs: couldn't stop process %d: wait returned %d\n",
+ inferior_pid, retval);
+ /* FIXME: might I not just use waitpid?
+ Or try find_procinfo to see if I know about this child? */
}
- else if (argsize >= 1 && strncmp (*argv, "times", argsize) == 0)
+ else
{
- summary = 0;
- times = 1;
+ /* Unknown error from wait_for_stop. */
+ proc_error (pi, "target_wait (wait_for_stop)", __LINE__);
}
- else if ((pid = atoi (*argv)) > 0)
+ }
+ else
+ {
+ /* This long block is reached if either:
+ a) the child was already stopped, or
+ b) we successfully waited for the child with wait_for_stop.
+ This block will analyze the /proc status, and translate it
+ into a waitstatus for GDB.
+
+ If we actually had to call wait because the /proc file
+ is gone (child terminated), then we skip this block,
+ because we already have a waitstatus. */
+
+ flags = proc_flags (pi);
+ why = proc_why (pi);
+ what = proc_what (pi);
+
+ if (flags & (PR_STOPPED | PR_ISTOP))
{
- pip = (struct procinfo *) xmalloc (sizeof (struct procinfo));
- memset (pip, 0, sizeof (*pip));
+#ifdef PR_ASYNC
+ /* If it's running async (for single_thread control),
+ set it back to normal again. */
+ if (flags & PR_ASYNC)
+ if (!proc_unset_async (pi))
+ proc_error (pi, "target_wait, unset_async", __LINE__);
+#endif
+
+ if (info_verbose)
+ proc_prettyprint_why (why, what, 1);
+
+ /* The 'pid' we will return to GDB is composed of
+ the process ID plus the lwp ID. */
+ retval = MERGEPID (pi->pid, proc_get_current_thread (pi));
+
+ switch (why) {
+ case PR_SIGNALLED:
+ wstat = (what << 8) | 0177;
+ break;
+ case PR_SYSENTRY:
+ switch (what) {
+#ifdef SYS_lwp_exit
+ case SYS_lwp_exit:
+#endif
+#ifdef SYS_lwpexit
+ case SYS_lwpexit:
+#endif
+#if defined (SYS_lwp_exit) || defined (SYS_lwpexit)
+ printf_filtered ("[%s exited]\n",
+ target_pid_to_str (retval));
+ delete_thread (retval);
+ status->kind = TARGET_WAITKIND_SPURIOUS;
+ return retval;
+#endif /* _lwp_exit */
+
+ case SYS_exit:
+ /* Handle SYS_exit call only */
+ /* Stopped at entry to SYS_exit.
+ Make it runnable, resume it, then use
+ the wait system call to get its exit code.
+ Proc_run_process always clears the current
+ fault and signal.
+ Then return its exit status. */
+ pi->status_valid = 0;
+ wstat = 0;
+ /* FIXME: what we should do is return
+ TARGET_WAITKIND_SPURIOUS. */
+ if (!proc_run_process (pi, 0, 0))
+ proc_error (pi, "target_wait, run_process", __LINE__);
+ if (attach_flag)
+ {
+ /* Don't call wait: simulate waiting for exit,
+ return a "success" exit code. Bogus: what if
+ it returns something else? */
+ wstat = 0;
+ retval = inferior_pid; /* ??? */
+ }
+ else
+ {
+ int temp = wait (&wstat);
+
+ /* FIXME: shouldn't I make sure I get the right
+ event from the right process? If (for
+ instance) I have killed an earlier inferior
+ process but failed to clean up after it
+ somehow, I could get its termination event
+ here. */
+
+ /* If wait returns -1, that's what we return to GDB. */
+ if (temp < 0)
+ retval = temp;
+ }
+ break;
+ default:
+ printf_filtered ("procfs: trapped on entry to ");
+ proc_prettyprint_syscall (proc_what (pi), 0);
+ printf_filtered ("\n");
+#ifndef PIOCSSPCACT
+ {
+ long i, nsysargs, *sysargs;
+
+ if ((nsysargs = proc_nsysarg (pi)) > 0 &&
+ (sysargs = proc_sysargs (pi)) != NULL)
+ {
+ printf_filtered ("%ld syscall arguments:\n", nsysargs);
+ for (i = 0; i < nsysargs; i++)
+ printf_filtered ("#%ld: 0x%08x\n",
+ i, sysargs[i]);
+ }
+
+ }
+#endif
+ if (status)
+ {
+ /* How to exit gracefully, returning "unknown event" */
+ status->kind = TARGET_WAITKIND_SPURIOUS;
+ return inferior_pid;
+ }
+ else
+ {
+ /* How to keep going without returning to wfi: */
+ target_resume (pid, 0, TARGET_SIGNAL_0);
+ goto wait_again;
+ }
+ break;
+ }
+ break;
+ case PR_SYSEXIT:
+ switch (what) {
+#ifdef SYS_exec
+ case SYS_exec:
+#endif
+#ifdef SYS_execv
+ case SYS_execv:
+#endif
+#ifdef SYS_execve
+ case SYS_execve:
+#endif
+ /* Hopefully this is our own "fork-child" execing
+ the real child. Hoax this event into a trap, and
+ GDB will see the child about to execute its start
+ address. */
+ wstat = (SIGTRAP << 8) | 0177;
+ break;
+#ifdef SYS_lwp_create
+ case SYS_lwp_create:
+#endif
+#ifdef SYS_lwpcreate
+ case SYS_lwpcreate:
+#endif
+#if defined(SYS_lwp_create) || defined(SYS_lwpcreate)
+ /*
+ * This syscall is somewhat like fork/exec.
+ * We will get the event twice: once for the parent LWP,
+ * and once for the child. We should already know about
+ * the parent LWP, but the child will be new to us. So,
+ * whenever we get this event, if it represents a new
+ * thread, simply add the thread to the list.
+ */
+
+ /* If not in procinfo list, add it. */
+ temp = proc_get_current_thread (pi);
+ if (!find_procinfo (pi->pid, temp))
+ create_procinfo (pi->pid, temp);
+
+ temp = MERGEPID (pi->pid, temp);
+ /* If not in GDB's thread list, add it. */
+ if (!in_thread_list (temp))
+ {
+ printf_filtered ("[New %s]\n", target_pid_to_str (temp));
+ add_thread (temp);
+ }
+ /* Return to WFI, but tell it to immediately resume. */
+ status->kind = TARGET_WAITKIND_SPURIOUS;
+ return inferior_pid;
+#endif /* _lwp_create */
+
+#ifdef SYS_lwp_exit
+ case SYS_lwp_exit:
+#endif
+#ifdef SYS_lwpexit
+ case SYS_lwpexit:
+#endif
+#if defined (SYS_lwp_exit) || defined (SYS_lwpexit)
+ printf_filtered ("[%s exited]\n",
+ target_pid_to_str (retval));
+ delete_thread (retval);
+ status->kind = TARGET_WAITKIND_SPURIOUS;
+ return retval;
+#endif /* _lwp_exit */
- pip->pid = pid;
- if (!open_proc_file (pid, pip, O_RDONLY, 0))
+#ifdef SYS_sproc
+ case SYS_sproc:
+ /* Nothing to do here for now. The old procfs
+ seemed to use this event to handle threads on
+ older (non-LWP) systems, where I'm assuming that
+ threads were actually separate processes. Irix,
+ maybe? Anyway, low priority for now. */
+#endif
+#ifdef SYS_fork
+ case SYS_fork:
+ /* FIXME: do we need to handle this? Investigate. */
+#endif
+#ifdef SYS_vfork
+ case SYS_vfork:
+ /* FIXME: see above. */
+#endif
+ default:
+ printf_filtered ("procfs: trapped on exit from ");
+ proc_prettyprint_syscall (proc_what (pi), 0);
+ printf_filtered ("\n");
+#ifndef PIOCSSPCACT
+ {
+ long i, nsysargs, *sysargs;
+
+ if ((nsysargs = proc_nsysarg (pi)) > 0 &&
+ (sysargs = proc_sysargs (pi)) != NULL)
+ {
+ printf_filtered ("%ld syscall arguments:\n", nsysargs);
+ for (i = 0; i < nsysargs; i++)
+ printf_filtered ("#%ld: 0x%08x\n",
+ i, sysargs[i]);
+ }
+ }
+#endif
+ status->kind = TARGET_WAITKIND_SPURIOUS;
+ return inferior_pid;
+ }
+ break;
+ case PR_REQUESTED:
+#if 0 /* FIXME */
+ wstat = (SIGSTOP << 8) | 0177;
+ break;
+#else
+ if (retry < 5)
+ {
+ printf_filtered ("Retry #%d:\n", retry);
+ pi->status_valid = 0;
+ goto wait_again;
+ }
+ else
+ {
+ /* If not in procinfo list, add it. */
+ temp = proc_get_current_thread (pi);
+ if (!find_procinfo (pi->pid, temp))
+ create_procinfo (pi->pid, temp);
+
+ /* If not in GDB's thread list, add it. */
+ temp = MERGEPID (pi->pid, temp);
+ if (!in_thread_list (temp))
+ {
+ printf_filtered ("[New %s]\n",
+ target_pid_to_str (temp));
+ add_thread (temp);
+ }
+
+ status->kind = TARGET_WAITKIND_STOPPED;
+ status->value.sig = 0;
+ return retval;
+ }
+#endif
+ case PR_JOBCONTROL:
+ wstat = (what << 8) | 0177;
+ break;
+ case PR_FAULTED:
+ switch (what) { /* FIXME: FAULTED_USE_SIGINFO */
+#ifdef FLTWATCH
+ case FLTWATCH:
+ wstat = (SIGTRAP << 8) | 0177;
+ break;
+#endif
+#ifdef FLTKWATCH
+ case FLTKWATCH:
+ wstat = (SIGTRAP << 8) | 0177;
+ break;
+#endif
+ /* FIXME: use si_signo where possible. */
+ case FLTPRIV:
+#if (FLTILL != FLTPRIV) /* avoid "duplicate case" error */
+ case FLTILL:
+#endif
+ wstat = (SIGILL << 8) | 0177;
+ break;
+ case FLTBPT:
+#if (FLTTRACE != FLTBPT) /* avoid "duplicate case" error */
+ case FLTTRACE:
+#endif
+ wstat = (SIGTRAP << 8) | 0177;
+ break;
+ case FLTSTACK:
+ case FLTACCESS:
+#if (FLTBOUNDS != FLTSTACK) /* avoid "duplicate case" error */
+ case FLTBOUNDS:
+#endif
+ wstat = (SIGSEGV << 8) | 0177;
+ break;
+ case FLTIOVF:
+ case FLTIZDIV:
+#if (FLTFPE != FLTIOVF) /* avoid "duplicate case" error */
+ case FLTFPE:
+#endif
+ wstat = (SIGFPE << 8) | 0177;
+ break;
+ case FLTPAGE: /* Recoverable page fault */
+ default: /* FIXME: use si_signo if possible for fault */
+ retval = -1;
+ printf_filtered ("procfs:%d -- ", __LINE__);
+ printf_filtered ("child stopped for unknown reason:\n");
+ proc_prettyprint_why (why, what, 1);
+ error ("... giving up...");
+ break;
+ }
+ break; /* case PR_FAULTED: */
+ default: /* switch (why) unmatched */
+ printf_filtered ("procfs:%d -- ", __LINE__);
+ printf_filtered ("child stopped for unknown reason:\n");
+ proc_prettyprint_why (why, what, 1);
+ error ("... giving up...");
+ break;
+ }
+ /*
+ * Got this far without error:
+ * If retval isn't in the threads database, add it.
+ */
+ if (retval > 0 &&
+ retval != inferior_pid &&
+ !in_thread_list (retval))
{
- perror_with_name (pip -> pathname);
- /* NOTREACHED */
+ /*
+ * We have a new thread.
+ * We need to add it both to GDB's list and to our own.
+ * If we don't create a procinfo, resume may be unhappy
+ * later.
+ */
+ printf_filtered ("[New %s]\n", target_pid_to_str (retval));
+ add_thread (retval);
+ if (find_procinfo (PIDGET (retval), TIDGET (retval)) == NULL)
+ create_procinfo (PIDGET (retval), TIDGET (retval));
+
+ /* In addition, it's possible that this is the first
+ * new thread we've seen, in which case we may not
+ * have created entries for inferior_pid yet.
+ */
+ if (TIDGET (inferior_pid) != 0)
+ {
+ if (!in_thread_list (inferior_pid))
+ add_thread (inferior_pid);
+ if (find_procinfo (PIDGET (inferior_pid),
+ TIDGET (inferior_pid)) == NULL)
+ create_procinfo (PIDGET (inferior_pid),
+ TIDGET (inferior_pid));
+ }
}
- pid = pip->pid;
- make_cleanup (close_proc_file, pip);
}
- else if (**argv != '\000')
+ else /* flags do not indicate STOPPED */
{
- error ("Unrecognized or ambiguous keyword `%s'.", *argv);
+ /* surely this can't happen... */
+ printf_filtered ("procfs:%d -- process not stopped.\n",
+ __LINE__);
+ proc_prettyprint_flags (flags, 1);
+ error ("procfs: ...giving up...");
}
- argv++;
}
- }
- /* If we don't have a valid open process at this point, then we have no
- inferior or didn't specify a specific pid. */
-
- if (!pip)
- {
- error ("\
-No process. Start debugging a program or specify an explicit process ID.");
+ if (status)
+ store_waitstatus (status, wstat);
}
- if (!procfs_read_status (pip))
- {
- print_sys_errmsg (pip -> pathname, errno);
- error ("procfs_read_status failed");
- }
+ return retval;
+}
-#ifndef PROCFS_USE_READ_WRITE
-#ifdef PIOCLWPIDS
- nlwp = pip->prstatus.pr_nlwp;
- lwps = alloca ((2 * nlwp + 2) * sizeof (*lwps));
+static int
+procfs_xfer_memory (memaddr, myaddr, len, dowrite, target)
+ CORE_ADDR memaddr;
+ char *myaddr;
+ int len;
+ int dowrite;
+ struct target_ops *target; /* ignored */
+{
+ procinfo *pi;
+ int nbytes = 0;
- if (ioctl (pip->ctl_fd, PIOCLWPIDS, lwps))
+ /* Find procinfo for main process */
+ pi = find_procinfo_or_die (PIDGET (inferior_pid), 0);
+ if (pi->as_fd == 0 &&
+ open_procinfo_files (pi, FD_AS) == 0)
{
- print_sys_errmsg (pip -> pathname, errno);
- error ("PIOCLWPIDS failed");
+ proc_warn (pi, "xfer_memory, open_proc_files", __LINE__);
+ return 0;
}
-#else /* PIOCLWPIDS */
- nlwp = 1;
- lwps = alloca ((2 * nlwp + 2) * sizeof *lwps);
- lwps[0] = 0;
-#endif /* PIOCLWPIDS */
- for (; nlwp > 0; nlwp--, lwps++)
+ if (lseek (pi->as_fd, (off_t) memaddr, SEEK_SET) == (off_t) memaddr)
{
- pip = find_procinfo ((*lwps << 16) | pid, 1);
-
- if (!pip)
- {
- pip = (struct procinfo *) xmalloc (sizeof (struct procinfo));
- memset (pip, 0, sizeof (*pip));
- if (!open_proc_file ((*lwps << 16) | pid, pip, O_RDONLY, 0))
- continue;
-
- make_cleanup (close_proc_file, pip);
-
- if (!procfs_read_status (pip))
- {
- print_sys_errmsg (pip -> pathname, errno);
- error ("procfs_read_status failed");
- }
- }
-
-#endif /* PROCFS_USE_READ_WRITE */
-
- /* Print verbose information of the requested type(s), or just a summary
- of the information for all types. */
-
- printf_filtered ("\nInformation for %s.%d:\n\n", pip -> pathname, *lwps);
- if (summary || all || flags)
- {
- info_proc_flags (pip, summary);
- }
- if (summary || all)
+ if (dowrite)
{
- info_proc_stop (pip, summary);
-#ifdef UNIXWARE
- supply_gregset (&pip->prstatus.pr_lwp.pr_context.uc_mcontext.gregs);
+#ifdef NEW_PROC_API
+ PROCFS_NOTE ("write memory: ");
#else
- supply_gregset (&pip->prstatus.pr_reg);
+ PROCFS_NOTE ("write memory: \n");
#endif
- printf_filtered ("PC: ");
- print_address (read_pc (), gdb_stdout);
- printf_filtered ("\n");
- }
- if (summary || all || signals || faults)
- {
- info_proc_siginfo (pip, summary);
- }
- if (summary || all || syscalls)
- {
- info_proc_syscalls (pip, summary);
- }
- if (summary || all || mappings)
- {
- info_proc_mappings (pip, summary);
+ nbytes = write (pi->as_fd, myaddr, len);
}
- if (summary || all || signals)
+ else
{
- info_proc_signals (pip, summary);
+ PROCFS_NOTE ("read memory: \n");
+ nbytes = read (pi->as_fd, myaddr, len);
}
- if (summary || all || faults)
+ if (nbytes < 0)
{
- info_proc_faults (pip, summary);
+ nbytes = 0;
}
- printf_filtered ("\n");
-
- /* All done, deal with closing any temporary process info structure,
- freeing temporary memory , etc. */
-
- do_cleanups (old_chain);
-#ifndef PROCFS_USE_READ_WRITE
}
-#endif
+ return nbytes;
}
/*
-
-LOCAL FUNCTION
-
- modify_inherit_on_fork_flag - Change the inherit-on-fork flag
-
-SYNOPSIS
-
- void modify_inherit_on_fork_flag (fd, flag)
-
-DESCRIPTION
-
- Call this routine to modify the inherit-on-fork flag. This routine is
- just a nice wrapper to hide the #ifdefs needed by various systems to
- control this flag.
-
+ * Function: invalidate_cache
+ *
+ * Called by target_resume before making child runnable.
+ * Mark cached registers and status's invalid.
+ * If there are "dirty" caches that need to be written back
+ * to the child process, do that.
+ *
+ * File descriptors are also cached.
+ * As they are a limited resource, we cannot hold onto them indefinitely.
+ * However, as they are expensive to open, we don't want to throw them
+ * away indescriminately either. As a compromise, we will keep the
+ * file descriptors for the parent process, but discard any file
+ * descriptors we may have accumulated for the threads.
+ *
+ * Return value:
+ * As this function is called by iterate_over_threads, it always
+ * returns zero (so that iterate_over_threads will keep iterating).
*/
-static void
-modify_inherit_on_fork_flag (fd, flag)
- int fd;
- int flag;
+
+static int
+invalidate_cache (parent, pi, ptr)
+ procinfo *parent;
+ procinfo *pi;
+ void *ptr;
{
-#if defined (PIOCSET) || defined (PCSET)
- long pr_flags;
-#endif
- int retval = 0;
- struct proc_ctl pctl;
+ /*
+ * About to run the child; invalidate caches and do any other cleanup.
+ */
-#if defined (PIOCSET) || defined (PCSET) /* New method */
- pr_flags = PR_FORK;
- if (flag)
- {
-#ifdef PROCFS_USE_READ_WRITE
- pctl.cmd = PCSET;
- pctl.data = PR_FORK;
- if (write (fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
- retval = -1;
-#else
- retval = ioctl (fd, PIOCSET, &pr_flags);
+#if 0
+ if (pi->gregs_dirty)
+ if (parent == NULL ||
+ proc_get_current_thread (parent) != pi->tid)
+ if (!proc_set_gregs (pi)) /* flush gregs cache */
+ proc_warn (pi, "target_resume, set_gregs",
+ __LINE__);
+#ifdef FP0_REGNUM
+ if (pi->fpregs_dirty)
+ if (parent == NULL ||
+ proc_get_current_thread (parent) != pi->tid)
+ if (!proc_set_fpregs (pi)) /* flush fpregs cache */
+ proc_warn (pi, "target_resume, set_fpregs",
+ __LINE__);
#endif
- }
- else
- {
-#ifdef PROCFS_USE_READ_WRITE
- pctl.cmd = PCRESET;
- pctl.data = PR_FORK;
- if (write (fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
- retval = -1;
-#else
- retval = ioctl (fd, PIOCRESET, &pr_flags);
#endif
- }
-#else
-#ifdef PIOCSFORK /* Original method */
- if (flag)
- {
- retval = ioctl (fd, PIOCSFORK, NULL);
- }
- else
+ if (parent != NULL)
{
- retval = ioctl (fd, PIOCRFORK, NULL);
+ /* The presence of a parent indicates that this is an LWP.
+ Close any file descriptors that it might have open.
+ We don't do this to the master (parent) procinfo. */
+
+ close_procinfo_files (pi);
}
-#else
- Neither PR_FORK nor PIOCSFORK exist!!!
-#endif
+ pi->gregs_valid = 0;
+ pi->fpregs_valid = 0;
+#if 0
+ pi->gregs_dirty = 0;
+ pi->fpregs_dirty = 0;
#endif
+ pi->status_valid = 0;
+ pi->threads_valid = 0;
- if (!retval)
- return;
-
- print_sys_errmsg ("modify_inherit_on_fork_flag", errno);
- error ("PIOCSFORK or PR_FORK modification failed");
+ return 0;
}
+#if 0
/*
-
-LOCAL FUNCTION
-
- modify_run_on_last_close_flag - Change the run-on-last-close flag
-
-SYNOPSIS
-
- void modify_run_on_last_close_flag (fd, flag)
-
-DESCRIPTION
-
- Call this routine to modify the run-on-last-close flag. This routine
- is just a nice wrapper to hide the #ifdefs needed by various systems to
- control this flag.
-
+ * Function: make_signal_thread_runnable
+ *
+ * A callback function for iterate_over_threads.
+ * Find the asynchronous signal thread, and make it runnable.
+ * See if that helps matters any.
*/
-static void
-modify_run_on_last_close_flag (fd, flag)
- int fd;
- int flag;
+static int
+make_signal_thread_runnable (process, pi, ptr)
+ procinfo *process;
+ procinfo *pi;
+ void *ptr;
{
-#if defined (PIOCSET) || defined (PCSET)
- long pr_flags;
-#endif
- int retval = 0;
- struct proc_ctl pctl;
-
-#if defined (PIOCSET) || defined (PCSET) /* New method */
- pr_flags = PR_RLC;
- if (flag)
- {
-#ifdef PROCFS_USE_READ_WRITE
- pctl.cmd = PCSET;
- pctl.data = PR_RLC;
- if (write (fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
- retval = -1;
-#else
- retval = ioctl (fd, PIOCSET, &pr_flags);
-#endif
- }
- else
+#ifdef PR_ASLWP
+ if (proc_flags (pi) & PR_ASLWP)
{
-#ifdef PROCFS_USE_READ_WRITE
- pctl.cmd = PCRESET;
- pctl.data = PR_RLC;
- if (write (fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
- retval = -1;
-#else
- retval = ioctl (fd, PIOCRESET, &pr_flags);
-#endif
+ if (!proc_run_process (pi, 0, -1))
+ proc_error (pi, "make_signal_thread_runnable", __LINE__);
+ return 1;
}
-
-#else
-#ifdef PIOCSRLC /* Original method */
- if (flag)
- retval = ioctl (fd, PIOCSRLC, NULL);
- else
- retval = ioctl (fd, PIOCRRLC, NULL);
-#else
- Neither PR_RLC nor PIOCSRLC exist!!!
#endif
-#endif
-
- if (!retval)
- return;
-
- print_sys_errmsg ("modify_run_on_last_close_flag", errno);
- error ("PIOCSRLC or PR_RLC modification failed");
+ return 0;
}
+#endif
/*
-
-LOCAL FUNCTION
-
- procfs_clear_syscall_trap -- Deletes the trap for the specified system call.
-
-SYNOPSIS
-
- void procfs_clear_syscall_trap (struct procinfo *, int syscall_num, int errok)
-
-DESCRIPTION
-
- This function function disables traps for the specified system call.
- errok is non-zero if errors should be ignored.
+ * Function: target_resume
+ *
+ * Make the child process runnable. Normally we will then call
+ * procfs_wait and wait for it to stop again (unles gdb is async).
+ *
+ * Arguments:
+ * step: if true, then arrange for the child to stop again
+ * after executing a single instruction.
+ * signo: if zero, then cancel any pending signal.
+ * If non-zero, then arrange for the indicated signal
+ * to be delivered to the child when it runs.
+ * pid: if -1, then allow any child thread to run.
+ * if non-zero, then allow only the indicated thread to run.
+ ******* (not implemented yet)
*/
static void
-procfs_clear_syscall_trap (pi, syscall_num, errok)
- struct procinfo *pi;
- int syscall_num;
- int errok;
+procfs_resume (pid, step, signo)
+ int pid;
+ int step;
+ enum target_signal signo;
{
- sysset_t sysset;
- int goterr, i;
-
-#ifndef UNIXWARE
- goterr = ioctl (pi->ctl_fd, PIOCGENTRY, &sysset) < 0;
-
- if (goterr && !errok)
- {
- print_sys_errmsg (pi->pathname, errno);
- error ("PIOCGENTRY failed");
- }
-
- if (!goterr)
- {
- prdelset (&sysset, syscall_num);
+ procinfo *pi, *thread;
+ int native_signo;
+
+ /* 2.1:
+ prrun.prflags |= PRSVADDR;
+ prrun.pr_vaddr = $PC; set resume address
+ prrun.prflags |= PRSTRACE; trace signals in pr_trace (all)
+ prrun.prflags |= PRSFAULT; trace faults in pr_fault (all but PAGE)
+ prrun.prflags |= PRCFAULT; clear current fault.
+
+ PRSTRACE and PRSFAULT can be done by other means
+ (proc_trace_signals, proc_trace_faults)
+ PRSVADDR is unnecessary.
+ PRCFAULT may be replaced by a PIOCCFAULT call (proc_clear_current_fault)
+ This basically leaves PRSTEP and PRCSIG.
+ PRCSIG is like PIOCSSIG (proc_clear_current_signal).
+ So basically PR_STEP is the sole argument that must be passed
+ to proc_run_process (for use in the prrun struct by ioctl). */
+
+ /* Find procinfo for main process */
+ pi = find_procinfo_or_die (PIDGET (inferior_pid), 0);
+
+ /* First cut: ignore pid argument */
+ errno = 0;
- if ((ioctl (pi->ctl_fd, PIOCSENTRY, &sysset) < 0) && !errok)
- {
- print_sys_errmsg (pi->pathname, errno);
- error ("PIOCSENTRY failed");
- }
- }
+ /* Convert signal to host numbering. */
+ if (signo == 0 ||
+ (signo == TARGET_SIGNAL_STOP && pi->ignore_next_sigstop))
+ native_signo = 0;
+ else
+ native_signo = target_signal_to_host (signo);
- goterr = ioctl (pi->ctl_fd, PIOCGEXIT, &sysset) < 0;
+ pi->ignore_next_sigstop = 0;
- if (goterr && !errok)
- {
- procfs_clear_syscall_trap (pi, syscall_num, 1);
- print_sys_errmsg (pi->pathname, errno);
- error ("PIOCGEXIT failed");
- }
+ /* Running the process voids all cached registers and status. */
+ /* Void the threads' caches first */
+ proc_iterate_over_threads (pi, invalidate_cache, NULL);
+ /* Void the process procinfo's caches. */
+ invalidate_cache (NULL, pi, NULL);
- if (!goterr)
+ if (pid != -1)
{
- praddset (&sysset, syscall_num);
-
- if ((ioctl (pi->ctl_fd, PIOCSEXIT, &sysset) < 0) && !errok)
+ /* Resume a specific thread, presumably suppressing the others. */
+ thread = find_procinfo (PIDGET (pid), TIDGET (pid));
+ if (thread == NULL)
+ warning ("procfs: resume can't find thread %d -- resuming all.",
+ TIDGET (pid));
+ else
{
- procfs_clear_syscall_trap (pi, syscall_num, 1);
- print_sys_errmsg (pi->pathname, errno);
- error ("PIOCSEXIT failed");
+ if (thread->tid != 0)
+ {
+ /* We're to resume a specific thread, and not the others.
+ * Set the child process's PR_ASYNC flag.
+ */
+#ifdef PR_ASYNC
+ if (!proc_set_async (pi))
+ proc_error (pi, "target_resume, set_async", __LINE__);
+#endif
+#if 0
+ proc_iterate_over_threads (pi,
+ make_signal_thread_runnable,
+ NULL);
+#endif
+ pi = thread; /* substitute the thread's procinfo for run */
+ }
}
}
-#endif
- if (!pi->syscall_handlers)
+ if (!proc_run_process (pi, step, native_signo))
{
- if (!errok)
- error ("procfs_clear_syscall_trap: syscall_handlers is empty");
- return;
+ if (errno == EBUSY)
+ warning ("resume: target already running. Pretend to resume, and hope for the best!\n");
+ else
+ proc_error (pi, "target_resume", __LINE__);
}
-
- /* Remove handler func from the handler list */
-
- for (i = 0; i < pi->num_syscall_handlers; i++)
- if (pi->syscall_handlers[i].syscall_num == syscall_num)
- {
- if (i + 1 != pi->num_syscall_handlers)
- { /* Not the last entry.
- Move subsequent entries fwd. */
- memcpy (&pi->syscall_handlers[i], &pi->syscall_handlers[i + 1],
- (pi->num_syscall_handlers - i - 1)
- * sizeof (struct procfs_syscall_handler));
- }
-
- pi->syscall_handlers = xrealloc (pi->syscall_handlers,
- (pi->num_syscall_handlers - 1)
- * sizeof (struct procfs_syscall_handler));
- pi->num_syscall_handlers--;
- return;
- }
-
- if (!errok)
- error ("procfs_clear_syscall_trap: Couldn't find handler for sys call %d",
- syscall_num);
}
/*
+ * Function: register_gdb_signals
+ *
+ * Traverse the list of signals that GDB knows about
+ * (see "handle" command), and arrange for the target
+ * to be stopped or not, according to these settings.
+ *
+ * Returns non-zero for success, zero for failure.
+ */
+
+static int
+register_gdb_signals (pi, signals)
+ procinfo *pi;
+ sigset_t *signals;
+{
+ int signo;
-LOCAL FUNCTION
+ for (signo = 0; signo < NSIG; signo ++)
+ if (signal_stop_state (target_signal_from_host (signo)) == 0 &&
+ signal_print_state (target_signal_from_host (signo)) == 0 &&
+ signal_pass_state (target_signal_from_host (signo)) == 1)
+ prdelset (signals, signo);
+ else
+ praddset (signals, signo);
- procfs_set_syscall_trap -- arrange for a function to be called when the
- child executes the specified system call.
+ return proc_set_traced_signals (pi, signals);
+}
-SYNOPSIS
+/*
+ * Function: target_notice_signals
+ *
+ * Set up to trace signals in the child process.
+ */
- void procfs_set_syscall_trap (struct procinfo *, int syscall_num, int flags,
- syscall_func_t *function)
+static void
+procfs_notice_signals (pid)
+ int pid;
+{
+ sigset_t signals;
+ procinfo *pi = find_procinfo_or_die (PIDGET (pid), 0);
-DESCRIPTION
+ if (proc_get_traced_signals (pi, &signals) &&
+ register_gdb_signals (pi, &signals))
+ return;
+ else
+ proc_error (pi, "notice_signals", __LINE__);
+}
- This function sets up an entry and/or exit trap for the specified system
- call. When the child executes the specified system call, your function
- will be called with the call #, a flag that indicates entry or exit, and
- pointers to rtnval and statval (which are used by procfs_wait). The
- function should return non-zero if something interesting happened, zero
- otherwise.
+/*
+ * Function: target_files_info
+ *
+ * Print status information about the child process.
*/
static void
-procfs_set_syscall_trap (pi, syscall_num, flags, func)
- struct procinfo *pi;
- int syscall_num;
- int flags;
- syscall_func_t *func;
+procfs_files_info (ignore)
+ struct target_ops *ignore;
{
- sysset_t sysset;
+ printf_filtered ("\tUsing the running image of %s %s via /proc.\n",
+ attach_flag? "attached": "child",
+ target_pid_to_str (inferior_pid));
+}
-#ifndef UNIXWARE
- if (flags & PROCFS_SYSCALL_ENTRY)
- {
- if (ioctl (pi->ctl_fd, PIOCGENTRY, &sysset) < 0)
- {
- print_sys_errmsg (pi->pathname, errno);
- error ("PIOCGENTRY failed");
- }
+/*
+ * Function: target_open
+ *
+ * A dummy: you don't open procfs.
+ */
- praddset (&sysset, syscall_num);
+static void
+procfs_open (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ error ("Use the \"run\" command to start a Unix child process.");
+}
- if (ioctl (pi->ctl_fd, PIOCSENTRY, &sysset) < 0)
- {
- print_sys_errmsg (pi->pathname, errno);
- error ("PIOCSENTRY failed");
- }
- }
+/*
+ * Function: target_can_run
+ *
+ * This tells GDB that this target vector can be invoked
+ * for "run" or "attach".
+ */
- if (flags & PROCFS_SYSCALL_EXIT)
- {
- if (ioctl (pi->ctl_fd, PIOCGEXIT, &sysset) < 0)
- {
- procfs_clear_syscall_trap (pi, syscall_num, 1);
- print_sys_errmsg (pi->pathname, errno);
- error ("PIOCGEXIT failed");
- }
+int procfs_suppress_run = 0; /* Non-zero if procfs should pretend not to
+ be a runnable target. Used by targets
+ that can sit atop procfs, such as solaris
+ thread support. */
- praddset (&sysset, syscall_num);
- if (ioctl (pi->ctl_fd, PIOCSEXIT, &sysset) < 0)
- {
- procfs_clear_syscall_trap (pi, syscall_num, 1);
- print_sys_errmsg (pi->pathname, errno);
- error ("PIOCSEXIT failed");
- }
- }
-#endif
+static int
+procfs_can_run ()
+{
+ /* This variable is controlled by modules that sit atop procfs that
+ may layer their own process structure atop that provided here.
+ sol-thread.c does this because of the Solaris two-level thread
+ model. */
+
+ /* NOTE: possibly obsolete -- use the thread_stratum approach instead. */
- if (!pi->syscall_handlers)
- {
- pi->syscall_handlers = xmalloc (sizeof (struct procfs_syscall_handler));
- pi->syscall_handlers[0].syscall_num = syscall_num;
- pi->syscall_handlers[0].func = func;
- pi->num_syscall_handlers = 1;
- }
- else
- {
- int i;
-
- for (i = 0; i < pi->num_syscall_handlers; i++)
- if (pi->syscall_handlers[i].syscall_num == syscall_num)
- {
- pi->syscall_handlers[i].func = func;
- return;
- }
-
- pi->syscall_handlers = xrealloc (pi->syscall_handlers, (i + 1)
- * sizeof (struct procfs_syscall_handler));
- pi->syscall_handlers[i].syscall_num = syscall_num;
- pi->syscall_handlers[i].func = func;
- pi->num_syscall_handlers++;
- }
+ return !procfs_suppress_run;
}
-#ifdef SYS_lwp_create
-
/*
+ * Function: target_stop
+ *
+ * Stop the child process asynchronously, as when the
+ * gdb user types control-c or presses a "stop" button.
+ *
+ * Works by sending kill(SIGINT) to the child's process group.
+ */
+
+static void
+procfs_stop ()
+{
+ extern pid_t inferior_process_group;
-LOCAL FUNCTION
+ kill (-inferior_process_group, SIGINT);
+}
- procfs_lwp_creation_handler - handle exit from the _lwp_create syscall
+/*
+ * Function: unconditionally_kill_inferior
+ *
+ * Make it die. Wait for it to die. Clean up after it.
+ * Note: this should only be applied to the real process,
+ * not to an LWP, because of the check for parent-process.
+ * If we need this to work for an LWP, it needs some more logic.
+ */
-SYNOPSIS
+static void
+unconditionally_kill_inferior (pi)
+ procinfo *pi;
+{
+ int parent_pid;
- int procfs_lwp_creation_handler (pi, syscall_num, why, rtnvalp, statvalp)
+ parent_pid = proc_parent_pid (pi);
+#ifdef PROCFS_NEED_CLEAR_CURSIG_FOR_KILL
+ /* FIXME: use access functions */
+ /* Alpha OSF/1-3.x procfs needs a clear of the current signal
+ before the PIOCKILL, otherwise it might generate a corrupted core
+ file for the inferior. */
+ if (ioctl (pi->ctl_fd, PIOCSSIG, NULL) < 0)
+ {
+ printf_filtered ("unconditionally_kill: SSIG failed!\n");
+ }
+#endif
+#ifdef PROCFS_NEED_PIOCSSIG_FOR_KILL
+ /* Alpha OSF/1-2.x procfs needs a PIOCSSIG call with a SIGKILL signal
+ to kill the inferior, otherwise it might remain stopped with a
+ pending SIGKILL.
+ We do not check the result of the PIOCSSIG, the inferior might have
+ died already. */
+ {
+ struct siginfo newsiginfo;
-DESCRIPTION
+ memset ((char *) &newsiginfo, 0, sizeof (newsiginfo));
+ newsiginfo.si_signo = SIGKILL;
+ newsiginfo.si_code = 0;
+ newsiginfo.si_errno = 0;
+ newsiginfo.si_pid = getpid ();
+ newsiginfo.si_uid = getuid ();
+ /* FIXME: use proc_set_current_signal */
+ ioctl (pi->ctl_fd, PIOCSSIG, &newsiginfo);
+ }
+#else /* PROCFS_NEED_PIOCSSIG_FOR_KILL */
+ if (!proc_kill (pi, SIGKILL))
+ proc_warn (pi, "unconditionally_kill, proc_kill", __LINE__);
+#endif /* PROCFS_NEED_PIOCSSIG_FOR_KILL */
+ destroy_procinfo (pi);
- This routine is called both when an inferior process and it's new lwp
- are about to finish a _lwp_create() system call. This is the system
- call that Solaris uses to create a lightweight process. When the
- target process gets this event, we can look at sysarg[2] to find the
- new childs lwp ID, and create a procinfo struct from that. After that,
- we pretend that we got a SIGTRAP, and return non-zero to tell
- procfs_wait to wake up. Subsequently, wait_for_inferior gets woken up,
- sees the new process and continues it.
+ /* If pi is GDB's child, wait for it to die. */
+ if (parent_pid == getpid ())
+ /* FIXME: should we use waitpid to make sure we get the right event?
+ Should we check the returned event? */
+ {
+#if 0
+ int status, ret;
- When we see the child exiting from lwp_create, we just contine it,
- since everything was handled when the parent trapped.
+ ret = waitpid (pi->pid, &status, 0);
+#else
+ wait (NULL);
+#endif
+ }
+}
-NOTES
- In effect, we are only paying attention to the parent's completion of
- the lwp_create syscall. If we only paid attention to the child
- instead, then we wouldn't detect the creation of a suspended thread.
+/*
+ * Function: target_kill_inferior
+ *
+ * We're done debugging it, and we want it to go away.
+ * Then we want GDB to forget all about it.
*/
-static int
-procfs_lwp_creation_handler (pi, syscall_num, why, rtnvalp, statvalp)
- struct procinfo *pi;
- int syscall_num;
- int why;
- int *rtnvalp;
- int *statvalp;
+static void
+procfs_kill_inferior ()
{
- int lwp_id;
- struct procinfo *childpi;
- struct proc_ctl pctl;
-
- /* We've just detected the completion of an lwp_create system call. Now we
- need to setup a procinfo struct for this thread, and notify the thread
- system of the new arrival. */
+ if (inferior_pid != 0) /* ? */
+ {
+ /* Find procinfo for main process */
+ procinfo *pi = find_procinfo (PIDGET (inferior_pid), 0);
- /* If lwp_create failed, then nothing interesting happened. Continue the
- process and go back to sleep. */
+ if (pi)
+ unconditionally_kill_inferior (pi);
+ target_mourn_inferior ();
+ }
+}
-#ifdef UNIXWARE
- /* Joel ... can you check this logic out please? JKJ */
- if (pi->prstatus.pr_lwp.pr_context.uc_mcontext.gregs[R_EFL] & 1)
- { /* _lwp_create failed */
- pctl.cmd = PCRUN;
- pctl.data = PRCFAULT;
+/*
+ * Function: target_mourn_inferior
+ *
+ * Forget we ever debugged this thing!
+ */
- if (write (pi->ctl_fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
- perror_with_name (pi->pathname);
+static void
+procfs_mourn_inferior ()
+{
+ procinfo *pi;
- return 0;
+ if (inferior_pid != 0)
+ {
+ /* Find procinfo for main process */
+ pi = find_procinfo (PIDGET (inferior_pid), 0);
+ if (pi)
+ destroy_procinfo (pi);
}
-#else /* UNIXWARE */
- if (PROCFS_GET_CARRY (pi->prstatus.pr_reg))
- { /* _lwp_create failed */
- pi->prrun.pr_flags &= PRSTEP;
- pi->prrun.pr_flags |= PRCFAULT;
-
- if (ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
- perror_with_name (pi->pathname);
+ unpush_target (&procfs_ops);
+ generic_mourn_inferior ();
+}
- return 0;
- }
-#endif
+/*
+ * Function: init_inferior
+ *
+ * When GDB forks to create a runnable inferior process,
+ * this function is called on the parent side of the fork.
+ * It's job is to do whatever is necessary to make the child
+ * ready to be debugged, and then wait for the child to synchronize.
+ */
- /* At this point, the new thread is stopped at it's first instruction, and
- the parent is stopped at the exit from lwp_create. */
+static void
+procfs_init_inferior (pid)
+ int pid;
+{
+ procinfo *pi;
+ sigset_t signals;
+ int fail;
- if (pi->new_child) /* Child? */
- { /* Yes, just continue it */
-#ifdef UNIXWARE
- pctl.cmd = PCRUN;
- pctl.data = PRCFAULT;
+ /* This routine called on the parent side (GDB side)
+ after GDB forks the inferior. */
- if (write(pi->ctl_fd, (char *)&pctl, sizeof (struct proc_ctl)) < 0)
-#else /* !UNIXWARE */
- pi->prrun.pr_flags &= PRSTEP;
- pi->prrun.pr_flags |= PRCFAULT;
+ push_target (&procfs_ops);
- if ((pi->prstatus.pr_flags & PR_ISTOP)
- && ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
-#endif /* !UNIXWARE */
- perror_with_name (pi->pathname);
+ if ((pi = create_procinfo (pid, 0)) == NULL)
+ perror ("procfs: out of memory in 'init_inferior'");
+
+ if (!open_procinfo_files (pi, FD_CTL))
+ proc_error (pi, "init_inferior, open_proc_files", __LINE__);
+
+ /*
+ xmalloc // done
+ open_procinfo_files // done
+ link list // done
+ prfillset (trace)
+ procfs_notice_signals
+ prfillset (fault)
+ prdelset (FLTPAGE)
+ PIOCWSTOP
+ PIOCSFAULT
+ */
+
+ /* If not stopped yet, wait for it to stop. */
+ if (!(proc_flags (pi) & PR_STOPPED) &&
+ !(proc_wait_for_stop (pi)))
+ dead_procinfo (pi, "init_inferior: wait_for_stop failed", KILL);
+
+ /* Save some of the /proc state to be restored if we detach. */
+ /* FIXME: Why? In case another debugger was debugging it?
+ We're it's parent, for Ghu's sake! */
+ if (!proc_get_traced_signals (pi, &pi->saved_sigset))
+ proc_error (pi, "init_inferior, get_traced_signals", __LINE__);
+ if (!proc_get_held_signals (pi, &pi->saved_sighold))
+ proc_error (pi, "init_inferior, get_held_signals", __LINE__);
+ if (!proc_get_traced_faults (pi, &pi->saved_fltset))
+ proc_error (pi, "init_inferior, get_traced_faults", __LINE__);
+ if (!proc_get_traced_sysentry (pi, &pi->saved_entryset))
+ proc_error (pi, "init_inferior, get_traced_sysentry", __LINE__);
+ if (!proc_get_traced_sysexit (pi, &pi->saved_exitset))
+ proc_error (pi, "init_inferior, get_traced_sysexit", __LINE__);
+
+ /* Register to trace selected signals in the child. */
+ prfillset (&signals);
+ if (!register_gdb_signals (pi, &signals))
+ proc_error (pi, "init_inferior, register_signals", __LINE__);
+
+ if ((fail = procfs_debug_inferior (pi)) != 0)
+ proc_error (pi, "init_inferior (procfs_debug_inferior)", fail);
+
+ /* FIXME: logically, we should really be turning OFF run-on-last-close,
+ and possibly even turning ON kill-on-last-close at this point. But
+ I can't make that change without careful testing which I don't have
+ time to do right now... */
+ /* Turn on run-on-last-close flag so that the child
+ will die if GDB goes away for some reason. */
+ if (!proc_set_run_on_last_close (pi))
+ proc_error (pi, "init_inferior, set_RLC", __LINE__);
+
+ /* The 'process ID' we return to GDB is composed of
+ the actual process ID plus the lwp ID. */
+ inferior_pid = MERGEPID (pi->pid, proc_get_current_thread (pi));
- pi->new_child = 0; /* No longer new */
+#ifdef START_INFERIOR_TRAPS_EXPECTED
+ startup_inferior (START_INFERIOR_TRAPS_EXPECTED);
+#else
+ /* One trap to exec the shell, one to exec the program being debugged. */
+ startup_inferior (2);
+#endif /* START_INFERIOR_TRAPS_EXPECTED */
+}
- return 0;
- }
+/*
+ * Function: set_exec_trap
+ *
+ * When GDB forks to create a new process, this function is called
+ * on the child side of the fork before GDB exec's the user program.
+ * Its job is to make the child minimally debuggable, so that the
+ * parent GDB process can connect to the child and take over.
+ * This function should do only the minimum to make that possible,
+ * and to synchronize with the parent process. The parent process
+ * should take care of the details.
+ */
- /* We're the proud parent of a new thread. Setup an exit trap for lwp_create
- in the child and continue the parent. */
+static void
+procfs_set_exec_trap ()
+{
+ /* This routine called on the child side (inferior side)
+ after GDB forks the inferior. It must use only local variables,
+ because it may be sharing data space with its parent. */
- /* Third arg is pointer to new thread id. */
- lwp_id = read_memory_integer (
- THE_PR_LWP(pi->prstatus).pr_sysarg[2], sizeof (int));
+ procinfo *pi;
+ sysset_t exitset;
- lwp_id = (lwp_id << 16) | PIDGET (pi->pid);
+ if ((pi = create_procinfo (getpid (), 0)) == NULL)
+ perror_with_name ("procfs: create_procinfo failed in child.");
- childpi = create_procinfo (lwp_id);
+ if (open_procinfo_files (pi, FD_CTL) == 0)
+ {
+ proc_warn (pi, "set_exec_trap, open_proc_files", __LINE__);
+ gdb_flush (gdb_stderr);
+ /* no need to call "dead_procinfo", because we're going to exit. */
+ _exit (127);
+ }
- /* The new process has actually inherited the lwp_create syscall trap from
- it's parent, but we still have to call this to register handlers for
- that child. */
+#ifdef PRFS_STOPEXEC /* defined on OSF */
+ /* OSF method for tracing exec syscalls. Quoting:
+ Under Alpha OSF/1 we have to use a PIOCSSPCACT ioctl to trace
+ exits from exec system calls because of the user level loader. */
+ /* FIXME: make nice and maybe move into an access function. */
+ {
+ int prfs_flags;
- procfs_set_inferior_syscall_traps (childpi);
- add_thread (lwp_id);
- printf_filtered ("[New %s]\n", target_pid_to_str (lwp_id));
+ if (ioctl (pi->ctl_fd, PIOCGSPCACT, &prfs_flags) < 0)
+ {
+ proc_warn (pi, "set_exec_trap (PIOCGSPCACT)", __LINE__);
+ gdb_flush (gdb_stderr);
+ _exit (127);
+ }
+ prfs_flags |= PRFS_STOPEXEC;
- /* Continue the parent */
-#ifdef UNIXWARE
- pctl.cmd = PCRUN;
- pctl.data = PRCFAULT;
+ if (ioctl (pi->ctl_fd, PIOCSSPCACT, &prfs_flags) < 0)
+ {
+ proc_warn (pi, "set_exec_trap (PIOCSSPCACT)", __LINE__);
+ gdb_flush (gdb_stderr);
+ _exit (127);
+ }
+ }
+#else /* not PRFS_STOPEXEC */
+ /* Everyone else's (except OSF) method for tracing exec syscalls */
+ /* GW: Rationale...
+ Not all systems with /proc have all the exec* syscalls with the same
+ names. On the SGI, for example, there is no SYS_exec, but there
+ *is* a SYS_execv. So, we try to account for that. */
- if (write(pi->ctl_fd, (char *)&pctl, sizeof (struct proc_ctl)) < 0)
-#else
- pi->prrun.pr_flags &= PRSTEP;
- pi->prrun.pr_flags |= PRCFAULT;
- if (ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
+ premptyset (&exitset);
+#ifdef SYS_exec
+ praddset (&exitset, SYS_exec);
+#endif
+#ifdef SYS_execve
+ praddset (&exitset, SYS_execve);
+#endif
+#ifdef SYS_execv
+ praddset (&exitset, SYS_execv);
#endif
- perror_with_name (pi->pathname);
-
- /* The new child may have been created in one of two states:
- SUSPENDED or RUNNABLE. If runnable, we will simply signal it to run.
- If suspended, we flag it to be continued later, when it has an event. */
- if (THE_PR_LWP(childpi->prstatus).pr_why == PR_SUSPENDED)
- childpi->new_child = 1; /* Flag this as an unseen child process */
- else
+ if (!proc_set_traced_sysexit (pi, &exitset))
{
- /* Continue the child */
-#ifdef UNIXWARE
- pctl.cmd = PCRUN;
- pctl.data = PRCFAULT;
-
- if (write(pi->ctl_fd, (char *)&pctl, sizeof (struct proc_ctl)) < 0)
-#else
- childpi->prrun.pr_flags &= PRSTEP;
- childpi->prrun.pr_flags |= PRCFAULT;
-
- if (ioctl (childpi->ctl_fd, PIOCRUN, &childpi->prrun) != 0)
-#endif
- perror_with_name (childpi->pathname);
+ proc_warn (pi, "set_exec_trap, set_traced_sysexit", __LINE__);
+ gdb_flush (gdb_stderr);
+ _exit (127);
}
- return 0;
+#endif /* PRFS_STOPEXEC */
+
+ /* FIXME: should this be done in the parent instead? */
+ /* Turn off inherit on fork flag so that all grand-children
+ of gdb start with tracing flags cleared. */
+ if (!proc_unset_inherit_on_fork (pi))
+ proc_warn (pi, "set_exec_trap, unset_inherit", __LINE__);
+
+ /* Turn off run on last close flag, so that the child process
+ cannot run away just because we close our handle on it.
+ We want it to wait for the parent to attach. */
+ if (!proc_unset_run_on_last_close (pi))
+ proc_warn (pi, "set_exec_trap, unset_RLC", __LINE__);
+
+ /* FIXME: No need to destroy the procinfo --
+ we have our own address space, and we're about to do an exec! */
+ /*destroy_procinfo (pi);*/
}
-#endif /* SYS_lwp_create */
-/* Fork an inferior process, and start debugging it with /proc. */
+/*
+ * Function: create_inferior
+ *
+ * This function is called BEFORE gdb forks the inferior process.
+ * Its only real responsibility is to set things up for the fork,
+ * and tell GDB which two functions to call after the fork (one
+ * for the parent, and one for the child).
+ *
+ * This function does a complicated search for a unix shell program,
+ * which it then uses to parse arguments and environment variables
+ * to be sent to the child. I wonder whether this code could not
+ * be abstracted out and shared with other unix targets such as
+ * infptrace?
+ */
static void
procfs_create_inferior (exec_file, allargs, env)
/* Not found. This must be an error rather than merely passing
the file to execlp(), because execlp() would try all the
exec()s, causing GDB to get confused. */
- error ("Can't find shell %s in PATH", shell_file);
+ error ("procfs:%d -- Can't find shell %s in PATH",
+ __LINE__, shell_file);
shell_file = tryname;
}
- fork_inferior (exec_file, allargs, env,
- proc_set_exec_trap, procfs_init_inferior, NULL, shell_file);
+ fork_inferior (exec_file, allargs, env, procfs_set_exec_trap,
+ procfs_init_inferior, NULL, shell_file);
/* We are at the first instruction we care about. */
/* Pedal to the metal... */
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
}
-/* Clean up after the inferior dies. */
+/*
+ * Function: notice_thread
+ *
+ * Callback for find_new_threads.
+ * Calls "add_thread".
+ */
-static void
-procfs_mourn_inferior ()
+static int
+procfs_notice_thread (pi, thread, ptr)
+ procinfo *pi;
+ procinfo *thread;
+ void *ptr;
{
- struct procinfo *pi;
- struct procinfo *next_pi;
+ int gdb_threadid = MERGEPID (pi->pid, thread->tid);
- for (pi = procinfo_list; pi; pi = next_pi)
- {
- next_pi = pi->next;
- unconditionally_kill_inferior (pi);
- }
+ if (!in_thread_list (gdb_threadid))
+ add_thread (gdb_threadid);
- unpush_target (&procfs_ops);
- generic_mourn_inferior ();
+ return 0;
+}
+
+/*
+ * Function: target_find_new_threads
+ *
+ * Query all the threads that the target knows about,
+ * and give them back to GDB to add to its list.
+ */
+
+void
+procfs_find_new_threads ()
+{
+ procinfo *pi;
+
+ /* Find procinfo for main process */
+ pi = find_procinfo_or_die (PIDGET (inferior_pid), 0);
+ proc_update_threads (pi);
+ proc_iterate_over_threads (pi, procfs_notice_thread, NULL);
}
+/*
+ * Function: target_thread_alive
+ *
+ * Return true if the thread is still 'alive'.
+ *
+ * This guy doesn't really seem to be doing his job.
+ * Got to investigate how to tell when a thread is really gone.
+ */
-/* Mark our target-struct as eligible for stray "run" and "attach" commands. */
static int
-procfs_can_run ()
+procfs_thread_alive (pid)
+ int pid;
{
- /* This variable is controlled by modules that sit atop procfs that may layer
- their own process structure atop that provided here. sol-thread.c does
- this because of the Solaris two-level thread model. */
+ int proc, thread;
+ procinfo *pi;
- return !procfs_suppress_run;
+ proc = PIDGET (pid);
+ thread = TIDGET (pid);
+ /* If I don't know it, it ain't alive! */
+ if ((pi = find_procinfo (proc, thread)) == NULL)
+ return 0;
+
+ /* If I can't get its status, it ain't alive!
+ What's more, I need to forget about it! */
+ if (!proc_get_status (pi))
+ {
+ destroy_procinfo (pi);
+ return 0;
+ }
+ /* I couldn't have got its status if it weren't alive, so it's alive. */
+ return 1;
}
-#ifdef TARGET_HAS_HARDWARE_WATCHPOINTS
-#ifndef UNIXWARE
-\f
-/* Insert a watchpoint */
-int
-procfs_set_watchpoint(pid, addr, len, rw)
- int pid;
- CORE_ADDR addr;
- int len;
- int rw;
+
+/*
+ * Function: target_pid_to_str
+ *
+ * Return a string to be used to identify the thread in
+ * the "info threads" display.
+ */
+
+char *
+procfs_pid_to_str (pid)
+ int pid;
+{
+ static char buf[80];
+ int proc, thread;
+ procinfo *pi;
+
+ proc = PIDGET (pid);
+ thread = TIDGET (pid);
+ pi = find_procinfo (proc, thread);
+
+ if (thread == 0)
+ sprintf (buf, "Process %d", proc);
+ else
+ sprintf (buf, "LWP %d", thread);
+ return &buf[0];
+}
+
+/*
+ * Function: procfs_set_watchpoint
+ * Insert a watchpoint
+ */
+
+int
+procfs_set_watchpoint (pid, addr, len, rwflag, after)
+ int pid;
+ CORE_ADDR addr;
+ int len;
+ int rwflag;
+ int after;
{
- struct procinfo *pi;
- prwatch_t wpt;
-
- pi = find_procinfo (pid == -1 ? inferior_pid : pid, 0);
- wpt.pr_vaddr = (caddr_t)addr;
- wpt.pr_size = len;
- wpt.pr_wflags = ((rw & 1) ? MA_READ : 0) | ((rw & 2) ? MA_WRITE : 0);
- if (ioctl (pi->ctl_fd, PIOCSWATCH, &wpt) < 0)
+#ifndef UNIXWARE
+ int pflags = 0;
+ procinfo *pi;
+
+ pi = find_procinfo_or_die (pid == -1 ?
+ PIDGET (inferior_pid) : PIDGET (pid), 0);
+
+ /* Translate from GDB's flags to /proc's */
+ if (len > 0) /* len == 0 means delete watchpoint */
{
- if (errno == E2BIG)
+ switch (rwflag) { /* FIXME: need an enum! */
+ case hw_write: /* default watchpoint (write) */
+ pflags = WRITE_WATCHFLAG;
+ break;
+ case hw_read: /* read watchpoint */
+ pflags = READ_WATCHFLAG;
+ break;
+ case hw_access: /* access watchpoint */
+ pflags = READ_WATCHFLAG | WRITE_WATCHFLAG;
+ break;
+ case hw_execute: /* execution HW breakpoint */
+ pflags = EXEC_WATCHFLAG;
+ break;
+ default: /* Something weird. Return error. */
return -1;
- /* Currently it sometimes happens that the same watchpoint gets
- deleted twice - don't die in this case (FIXME please) */
+ }
+ if (after) /* Stop after r/w access is completed. */
+ pflags |= AFTER_WATCHFLAG;
+ }
+
+ if (!proc_set_watchpoint (pi, addr, len, pflags))
+ {
+ if (errno == E2BIG) /* Typical error for no resources */
+ return -1; /* fail */
+ /* GDB may try to remove the same watchpoint twice.
+ If a remove request returns no match, don't error. */
if (errno == ESRCH && len == 0)
- return 0;
- print_sys_errmsg (pi->pathname, errno);
- error ("PIOCSWATCH failed");
+ return 0; /* ignore */
+ proc_error (pi, "set_watchpoint", __LINE__);
}
+#endif
return 0;
}
+/*
+ * Function: stopped_by_watchpoint
+ *
+ * Returns non-zero if process is stopped on a hardware watchpoint fault,
+ * else returns zero.
+ */
+
int
-procfs_stopped_by_watchpoint(pid)
- int pid;
+procfs_stopped_by_watchpoint (pid)
+ int pid;
{
- struct procinfo *pi;
- short what;
- short why;
+ procinfo *pi;
- pi = find_procinfo (pid == -1 ? inferior_pid : pid, 0);
- if (pi->prstatus.pr_flags & (PR_STOPPED | PR_ISTOP))
+ pi = find_procinfo_or_die (pid == -1 ?
+ PIDGET (inferior_pid) : PIDGET (pid), 0);
+ if (proc_flags (pi) & (PR_STOPPED | PR_ISTOP))
{
- why = pi->prstatus.pr_why;
- what = pi->prstatus.pr_what;
- if (why == PR_FAULTED
-#if defined (FLTWATCH) && defined (FLTKWATCH)
- && (what == FLTWATCH || what == FLTKWATCH)
-#else
+ if (proc_why (pi) == PR_FAULTED)
+ {
#ifdef FLTWATCH
- && (what == FLTWATCH)
+ if (proc_what (pi) == FLTWATCH)
+ return 1;
#endif
#ifdef FLTKWATCH
- && (what == FLTKWATCH)
+ if (proc_what (pi) == FLTKWATCH)
+ return 1;
#endif
-#endif
- )
- return what;
+ }
}
return 0;
}
-#endif /* !UNIXWARE */
-#endif /* TARGET_HAS_HARDWARE_WATCHPOINTS */
-/* Why is this necessary? Shouldn't dead threads just be removed from the
- thread database? */
+#ifdef TM_I386SOL2_H
+/*
+ * Function: procfs_find_LDT_entry
+ *
+ * Input:
+ * int pid; // The GDB-style pid-plus-LWP.
+ *
+ * Return:
+ * pointer to the corresponding LDT entry.
+ */
-static int
-procfs_thread_alive (pid)
+struct ssd *
+procfs_find_LDT_entry (pid)
int pid;
{
- struct procinfo *pi, *next_pi;
+ gdb_gregset_t *gregs;
+ int key;
+ procinfo *pi;
- for (pi = procinfo_list; pi; pi = next_pi)
+ /* Find procinfo for the lwp. */
+ if ((pi = find_procinfo (PIDGET (pid), TIDGET (pid))) == NULL)
{
- next_pi = pi->next;
- if (pi -> pid == pid)
- if (procfs_read_status (pi)) /* alive */
- return 1;
- else /* defunct (exited) */
- {
- close_proc_file (pi);
- return 0;
- }
+ warning ("procfs_find_LDT_entry: could not find procinfi for %d.",
+ pid);
+ return NULL;
}
- return 0;
+ /* get its general registers. */
+ if ((gregs = proc_get_gregs (pi)) == NULL)
+ {
+ warning ("procfs_find_LDT_entry: could not read gregs for %d.",
+ pid);
+ return NULL;
+ }
+ /* Now extract the GS register's lower 16 bits. */
+ key = (*gregs)[GS] & 0xffff;
+
+ /* Find the matching entry and return it. */
+ return proc_get_LDT_entry (pi, key);
}
+#endif /* TM_I386SOL2_H */
-int
-procfs_first_available ()
+
+
+static void
+info_proc_cmd (args, from_tty)
+ char *args;
+ int from_tty;
{
- struct procinfo *pi;
+ struct cleanup *old_chain;
+ procinfo *process = NULL;
+ procinfo *thread = NULL;
+ char **argv = NULL;
+ char *tmp = NULL;
+ int pid = 0;
+ int tid = 0;
- for (pi = procinfo_list; pi; pi = pi->next)
+ old_chain = make_cleanup (null_cleanup, 0);
+ if (args)
+ {
+ if ((argv = buildargv (args)) == NULL)
+ nomem (0);
+ else
+ make_cleanup ((make_cleanup_func) freeargv, argv);
+ }
+ while (argv != NULL && *argv != NULL)
+ {
+ if (isdigit (argv[0][0]))
+ {
+ pid = strtoul (argv[0], &tmp, 10);
+ if (*tmp == '/')
+ tid = strtoul (++tmp, NULL, 10);
+ }
+ else if (argv[0][0] == '/')
+ {
+ tid = strtoul (argv[0] + 1, NULL, 10);
+ }
+ else
+ {
+ /* [...] */
+ }
+ argv++;
+ }
+ if (pid == 0)
+ pid = PIDGET (inferior_pid);
+ if (pid == 0)
+ error ("No current process: you must name one.");
+ else
+ {
+ /* Have pid, will travel.
+ First see if it's a process we're already debugging. */
+ process = find_procinfo (pid, 0);
+ if (process == NULL)
+ {
+ /* No. So open a procinfo for it, but
+ remember to close it again when finished. */
+ process = create_procinfo (pid, 0);
+ make_cleanup ((make_cleanup_func) destroy_procinfo, process);
+ if (!open_procinfo_files (process, FD_CTL))
+ proc_error (process, "info proc, open_procinfo_files", __LINE__);
+ }
+ }
+ if (tid != 0)
+ thread = create_procinfo (pid, tid);
+
+ if (process)
+ {
+ printf_filtered ("process %d flags:\n", process->pid);
+ proc_prettyprint_flags (proc_flags (process), 1);
+ if (proc_flags (process) & (PR_STOPPED | PR_ISTOP))
+ proc_prettyprint_why (proc_why (process), proc_what (process), 1);
+ if (proc_get_nthreads (process) > 1)
+ printf_filtered ("Process has %d threads.\n",
+ proc_get_nthreads (process));
+ }
+ if (thread)
{
- if (procfs_read_status (pi))
- return pi->pid;
+ printf_filtered ("thread %d flags:\n", thread->tid);
+ proc_prettyprint_flags (proc_flags (thread), 1);
+ if (proc_flags (thread) & (PR_STOPPED | PR_ISTOP))
+ proc_prettyprint_why (proc_why (thread), proc_what (thread), 1);
}
- return -1;
+
+ do_cleanups (old_chain);
}
-int
-procfs_get_pid_fd (pid)
- int pid;
+static void
+proc_trace_syscalls (args, from_tty, entry_or_exit, mode)
+ char *args;
+ int from_tty;
+ int entry_or_exit;
+ int mode;
{
- struct procinfo *pi = find_procinfo (pid, 1);
+ procinfo *pi;
+ sysset_t *sysset;
+ int syscallnum = 0;
- if (pi == NULL)
- return -1;
+ if (inferior_pid <= 0)
+ error ("you must be debugging a process to use this command.");
- return pi->ctl_fd;
-}
+ if (args == NULL || args[0] == 0)
+ error_no_arg ("system call to trace");
-/* Send a SIGINT to the process group. This acts just like the user typed a
- ^C on the controlling terminal.
+ pi = find_procinfo_or_die (PIDGET (inferior_pid), 0);
+ if (isdigit (args[0]))
+ {
+ syscallnum = atoi (args);
+ if (entry_or_exit == PR_SYSENTRY)
+ sysset = proc_get_traced_sysentry (pi, NULL);
+ else
+ sysset = proc_get_traced_sysexit (pi, NULL);
- XXX - This may not be correct for all systems. Some may want to use
- killpg() instead of kill (-pgrp). */
+ if (sysset == NULL)
+ proc_error (pi, "proc-trace, get_traced_sysset", __LINE__);
-static void
-procfs_stop ()
+ if (mode == FLAG_SET)
+ praddset (sysset, syscallnum);
+ else
+ prdelset (sysset, syscallnum);
+
+ if (entry_or_exit == PR_SYSENTRY)
+ {
+ if (!proc_set_traced_sysentry (pi, sysset))
+ proc_error (pi, "proc-trace, set_traced_sysentry", __LINE__);
+ }
+ else
+ {
+ if (!proc_set_traced_sysexit (pi, sysset))
+ proc_error (pi, "proc-trace, set_traced_sysexit", __LINE__);
+ }
+ }
+}
+
+static void
+proc_trace_sysentry_cmd (args, from_tty)
+ char *args;
+ int from_tty;
{
- extern pid_t inferior_process_group;
+ proc_trace_syscalls (args, from_tty, PR_SYSENTRY, FLAG_SET);
+}
- kill (-inferior_process_group, SIGINT);
+static void
+proc_trace_sysexit_cmd (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ proc_trace_syscalls (args, from_tty, PR_SYSEXIT, FLAG_SET);
}
-\f
-/* Convert a pid to printable form. */
-#ifdef TIDGET
-char *
-procfs_pid_to_str (pid)
- int pid;
+static void
+proc_untrace_sysentry_cmd (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ proc_trace_syscalls (args, from_tty, PR_SYSENTRY, FLAG_RESET);
+}
+
+static void
+proc_untrace_sysexit_cmd (args, from_tty)
+ char *args;
+ int from_tty;
{
- static char buf[100];
+ proc_trace_syscalls (args, from_tty, PR_SYSEXIT, FLAG_RESET);
+}
- sprintf (buf, "Kernel thread %d", TIDGET (pid));
- return buf;
+int
+mapping_test (fd, core_addr)
+ int fd;
+ CORE_ADDR core_addr;
+{
+ printf ("File descriptor %d, base address 0x%08x\n", fd, core_addr);
+ if (fd > 0)
+ close (fd);
+ return 0;
}
-#endif /* TIDGET */
-\f
-static void
-init_procfs_ops ()
+void
+test_mapping_cmd (args, from_tty)
+ char *args;
+ int from_tty;
{
- procfs_ops.to_shortname = "procfs";
- procfs_ops.to_longname = "Unix /proc child process";
- procfs_ops.to_doc = "Unix /proc child process (started by the \"run\" command).";
- procfs_ops.to_open = procfs_open;
- procfs_ops.to_attach = procfs_attach;
- procfs_ops.to_detach = procfs_detach;
- procfs_ops.to_resume = procfs_resume;
- procfs_ops.to_wait = procfs_wait;
- procfs_ops.to_fetch_registers = procfs_fetch_registers;
- procfs_ops.to_store_registers = procfs_store_registers;
- procfs_ops.to_prepare_to_store = procfs_prepare_to_store;
- procfs_ops.to_xfer_memory = procfs_xfer_memory;
- procfs_ops.to_files_info = procfs_files_info;
- procfs_ops.to_insert_breakpoint = memory_insert_breakpoint;
- procfs_ops.to_remove_breakpoint = memory_remove_breakpoint;
- procfs_ops.to_terminal_init = terminal_init_inferior;
- procfs_ops.to_terminal_inferior = terminal_inferior;
- procfs_ops.to_terminal_ours_for_output = terminal_ours_for_output;
- procfs_ops.to_terminal_ours = terminal_ours;
- procfs_ops.to_terminal_info = child_terminal_info;
- procfs_ops.to_kill = procfs_kill_inferior;
- procfs_ops.to_create_inferior = procfs_create_inferior;
- procfs_ops.to_mourn_inferior = procfs_mourn_inferior;
- procfs_ops.to_can_run = procfs_can_run;
- procfs_ops.to_notice_signals = procfs_notice_signals;
- procfs_ops.to_thread_alive = procfs_thread_alive;
- procfs_ops.to_stop = procfs_stop;
- procfs_ops.to_stratum = process_stratum;
- procfs_ops.to_has_all_memory = 1;
- procfs_ops.to_has_memory = 1;
- procfs_ops.to_has_stack = 1;
- procfs_ops.to_has_registers = 1;
- procfs_ops.to_has_execution = 1;
- procfs_ops.to_magic = OPS_MAGIC;
+ int ret;
+ ret = proc_iterate_over_mappings (mapping_test);
+ printf ("iterate_over_mappings returned %d.\n", ret);
}
void
_initialize_procfs ()
{
-#ifdef HAVE_OPTIONAL_PROC_FS
- char procname[MAX_PROC_NAME_SIZE];
- int fd;
-
- /* If we have an optional /proc filesystem (e.g. under OSF/1),
- don't add procfs support if we cannot access the running
- GDB via /proc. */
- sprintf (procname, STATUS_PROC_NAME_FMT, getpid ());
- if ((fd = open (procname, O_RDONLY)) < 0)
- return;
- close (fd);
-#endif
-
init_procfs_ops ();
add_target (&procfs_ops);
+ add_info ("proc", info_proc_cmd,
+ "Show /proc process information about any running process.\
+Default is the process being debugged.");
+ add_com ("proc-trace-entry", no_class, proc_trace_sysentry_cmd,
+ "Give a trace of entries into the syscall.");
+ add_com ("proc-trace-exit", no_class, proc_trace_sysexit_cmd,
+ "Give a trace of exits from the syscall.");
+ add_com ("proc-untrace-entry", no_class, proc_untrace_sysentry_cmd,
+ "Cancel a trace of entries into the syscall.");
+ add_com ("proc-untrace-exit", no_class, proc_untrace_sysexit_cmd,
+ "Cancel a trace of exits from the syscall.");
+
+ add_com ("test-mapping", no_class, test_mapping_cmd,
+ "test iterate-over-mappings");
+}
+
+/* =================== END, GDB "MODULE" =================== */
+
+
+
+/* miscelaneous stubs: */
+/* The following satisfy a few random symbols mostly created by */
+/* the solaris threads implementation, which I will chase down */
+/* later. */
+
+/*
+ * Return a pid for which we guarantee
+ * we will be able to find a 'live' procinfo.
+ */
+
+int
+procfs_first_available ()
+{
+ if (procinfo_list)
+ return procinfo_list->pid;
+ else
+ return -1;
+}
- add_info ("processes", info_proc,
-"Show process status information using /proc entry.\n\
-Specify process id or use current inferior by default.\n\
-Specify keywords for detailed information; default is summary.\n\
-Keywords are: `all', `faults', `flags', `id', `mappings', `signals',\n\
-`status', `syscalls', and `times'.\n\
-Unambiguous abbreviations may be used.");
+int
+procfs_get_pid_fd (pid)
+ int pid;
+{
+ procinfo *pi;
- init_syscall_table ();
+ if (pid == -1 && inferior_pid != 0)
+ pi = find_procinfo (PIDGET (inferior_pid), 0);
+ else
+ pi = find_procinfo (PIDGET (pid), 0);
+
+ if (pi)
+ return pi->ctl_fd;
+ else
+ return -1;
}