/* Cache and manage the values of registers for GDB, the GNU debugger.
- Copyright 1986, 87, 89, 91, 94, 95, 96, 1998, 2000
+ Copyright 1986, 1987, 1989, 1991, 1994, 1995, 1996, 1998, 2000, 2001
Free Software Foundation, Inc.
This file is part of GDB.
#include "inferior.h"
#include "target.h"
#include "gdbarch.h"
+#include "gdbcmd.h"
+#include "regcache.h"
/*
* DATA STRUCTURE
* Here is the actual register cache.
*/
-/* NOTE: this is a write-back cache. There is no "dirty" bit for
+/* NOTE: this is a write-through cache. There is no "dirty" bit for
recording if the register values have been changed (eg. by the
user). Therefore all registers must be written back to the
target when appropriate. */
return register_valid[regnum];
}
-/* FIND_SAVED_REGISTER ()
+/* Record that REGNUM's value is cached if STATE is >0, uncached but
+ fetchable if STATE is 0, and uncached and unfetchable if STATE is <0. */
- Return the address in which frame FRAME's value of register REGNUM
- has been saved in memory. Or return zero if it has not been saved.
- If REGNUM specifies the SP, the value we return is actually
- the SP value, not an address where it was saved. */
-
-CORE_ADDR
-find_saved_register (struct frame_info *frame, int regnum)
-{
- register struct frame_info *frame1 = NULL;
- register CORE_ADDR addr = 0;
-
- if (frame == NULL) /* No regs saved if want current frame */
- return 0;
-
-#ifdef HAVE_REGISTER_WINDOWS
- /* We assume that a register in a register window will only be saved
- in one place (since the name changes and/or disappears as you go
- towards inner frames), so we only call get_frame_saved_regs on
- the current frame. This is directly in contradiction to the
- usage below, which assumes that registers used in a frame must be
- saved in a lower (more interior) frame. This change is a result
- of working on a register window machine; get_frame_saved_regs
- always returns the registers saved within a frame, within the
- context (register namespace) of that frame. */
-
- /* However, note that we don't want this to return anything if
- nothing is saved (if there's a frame inside of this one). Also,
- callers to this routine asking for the stack pointer want the
- stack pointer saved for *this* frame; this is returned from the
- next frame. */
-
- if (REGISTER_IN_WINDOW_P (regnum))
- {
- frame1 = get_next_frame (frame);
- if (!frame1)
- return 0; /* Registers of this frame are active. */
-
- /* Get the SP from the next frame in; it will be this
- current frame. */
- if (regnum != SP_REGNUM)
- frame1 = frame;
-
- FRAME_INIT_SAVED_REGS (frame1);
- return frame1->saved_regs[regnum]; /* ... which might be zero */
- }
-#endif /* HAVE_REGISTER_WINDOWS */
-
- /* Note that this next routine assumes that registers used in
- frame x will be saved only in the frame that x calls and
- frames interior to it. This is not true on the sparc, but the
- above macro takes care of it, so we should be all right. */
- while (1)
- {
- QUIT;
- frame1 = get_prev_frame (frame1);
- if (frame1 == 0 || frame1 == frame)
- break;
- FRAME_INIT_SAVED_REGS (frame1);
- if (frame1->saved_regs[regnum])
- addr = frame1->saved_regs[regnum];
- }
-
- return addr;
+void
+set_register_cached (int regnum, int state)
+{
+ register_valid[regnum] = state;
}
-/* DEFAULT_GET_SAVED_REGISTER ()
-
- Find register number REGNUM relative to FRAME and put its (raw,
- target format) contents in *RAW_BUFFER. Set *OPTIMIZED if the
- variable was optimized out (and thus can't be fetched). Set *LVAL
- to lval_memory, lval_register, or not_lval, depending on whether
- the value was fetched from memory, from a register, or in a strange
- and non-modifiable way (e.g. a frame pointer which was calculated
- rather than fetched). Set *ADDRP to the address, either in memory
- on as a REGISTER_BYTE offset into the registers array.
-
- Note that this implementation never sets *LVAL to not_lval. But
- it can be replaced by defining GET_SAVED_REGISTER and supplying
- your own.
-
- The argument RAW_BUFFER must point to aligned memory. */
-
-static void
-default_get_saved_register (char *raw_buffer,
- int *optimized,
- CORE_ADDR *addrp,
- struct frame_info *frame,
- int regnum,
- enum lval_type *lval)
-{
- CORE_ADDR addr;
-
- if (!target_has_registers)
- error ("No registers.");
-
- /* Normal systems don't optimize out things with register numbers. */
- if (optimized != NULL)
- *optimized = 0;
- addr = find_saved_register (frame, regnum);
- if (addr != 0)
- {
- if (lval != NULL)
- *lval = lval_memory;
- if (regnum == SP_REGNUM)
- {
- if (raw_buffer != NULL)
- {
- /* Put it back in target format. */
- store_address (raw_buffer, REGISTER_RAW_SIZE (regnum),
- (LONGEST) addr);
- }
- if (addrp != NULL)
- *addrp = 0;
- return;
- }
- if (raw_buffer != NULL)
- target_read_memory (addr, raw_buffer, REGISTER_RAW_SIZE (regnum));
- }
- else
- {
- if (lval != NULL)
- *lval = lval_register;
- addr = REGISTER_BYTE (regnum);
- if (raw_buffer != NULL)
- read_register_gen (regnum, raw_buffer);
- }
- if (addrp != NULL)
- *addrp = addr;
-}
+/* REGISTER_CHANGED
+ invalidate a single register REGNUM in the cache */
void
-get_saved_register (char *raw_buffer,
- int *optimized,
- CORE_ADDR *addrp,
- struct frame_info *frame,
- int regnum,
- enum lval_type *lval)
+register_changed (int regnum)
{
- GET_SAVED_REGISTER (raw_buffer, optimized, addrp, frame, regnum, lval);
+ set_register_cached (regnum, 0);
}
-/* READ_RELATIVE_REGISTER_RAW_BYTES_FOR_FRAME
-
- Copy the bytes of register REGNUM, relative to the input stack frame,
- into our memory at MYADDR, in target byte order.
- The number of bytes copied is REGISTER_RAW_SIZE (REGNUM).
+/* If REGNUM >= 0, return a pointer to register REGNUM's cache buffer area,
+ else return a pointer to the start of the cache buffer. */
- Returns 1 if could not be read, 0 if could. */
+char *
+register_buffer (int regnum)
+{
+ if (regnum < 0)
+ return registers;
+ else
+ return ®isters[REGISTER_BYTE (regnum)];
+}
-/* FIXME: This function increases the confusion between FP_REGNUM
- and the virtual/pseudo-frame pointer. */
+/* Return whether register REGNUM is a real register. */
static int
-read_relative_register_raw_bytes_for_frame (int regnum,
- char *myaddr,
- struct frame_info *frame)
+real_register (int regnum)
{
- int optim;
- if (regnum == FP_REGNUM && frame)
- {
- /* Put it back in target format. */
- store_address (myaddr, REGISTER_RAW_SIZE (FP_REGNUM),
- (LONGEST) FRAME_FP (frame));
-
- return 0;
- }
-
- get_saved_register (myaddr, &optim, (CORE_ADDR *) NULL, frame,
- regnum, (enum lval_type *) NULL);
+ return regnum >= 0 && regnum < NUM_REGS;
+}
- if (register_valid[regnum] < 0)
- return 1; /* register value not available */
+/* Return whether register REGNUM is a pseudo register. */
- return optim;
+static int
+pseudo_register (int regnum)
+{
+ return regnum >= NUM_REGS && regnum < NUM_REGS + NUM_PSEUDO_REGS;
}
-/* READ_RELATIVE_REGISTER_RAW_BYTES
+/* Fetch register REGNUM into the cache. */
- Copy the bytes of register REGNUM, relative to the current stack
- frame, into our memory at MYADDR, in target byte order.
- The number of bytes copied is REGISTER_RAW_SIZE (REGNUM).
+static void
+fetch_register (int regnum)
+{
+ if (real_register (regnum))
+ target_fetch_registers (regnum);
+ else if (pseudo_register (regnum))
+ FETCH_PSEUDO_REGISTER (regnum);
+}
- Returns 1 if could not be read, 0 if could. */
+/* Write register REGNUM cached value to the target. */
-int
-read_relative_register_raw_bytes (int regnum, char *myaddr)
+static void
+store_register (int regnum)
{
- return read_relative_register_raw_bytes_for_frame (regnum, myaddr,
- selected_frame);
+ if (real_register (regnum))
+ target_store_registers (regnum);
+ else if (pseudo_register (regnum))
+ STORE_PSEUDO_REGISTER (regnum);
}
-
/* Low level examining and depositing of registers.
The caller is responsible for making sure that the inferior is
gdb gives control to the user (ie watchpoints). */
alloca (0);
- for (i = 0; i < ARCH_NUM_REGS; i++)
- register_valid[i] = 0;
+ for (i = 0; i < NUM_REGS; i++)
+ set_register_cached (i, 0);
/* Assume that if all the hardware regs have changed,
then so have the pseudo-registers. */
for (i = NUM_REGS; i < NUM_REGS + NUM_PSEUDO_REGS; i++)
- register_valid[i] = 0;
+ set_register_cached (i, 0);
if (registers_changed_hook)
registers_changed_hook ();
{
int i;
- for (i = 0; i < ARCH_NUM_REGS; i++)
- register_valid[i] = 1;
+ for (i = 0; i < NUM_REGS; i++)
+ set_register_cached (i, 1);
/* Do not assume that the pseudo-regs have also been fetched.
Fetching all real regs might not account for all pseudo-regs. */
}
is that register sizes can vary, so a simple index won't suffice.]
It is far better to call read_register_gen and write_register_gen
if you want to get at the raw register contents, as it only takes a
- regno as an argument, and therefore can't do a partial register
+ regnum as an argument, and therefore can't do a partial register
update.
Prior to the recent fixes to check for partial updates, both read
read_register_bytes (int inregbyte, char *myaddr, int inlen)
{
int inregend = inregbyte + inlen;
- int regno;
+ int regnum;
if (registers_pid != inferior_pid)
{
/* See if we are trying to read bytes from out-of-date registers. If so,
update just those registers. */
- for (regno = 0; regno < NUM_REGS + NUM_PSEUDO_REGS; regno++)
+ for (regnum = 0; regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
{
int regstart, regend;
- if (register_valid[regno])
+ if (register_cached (regnum))
continue;
- if (REGISTER_NAME (regno) == NULL || *REGISTER_NAME (regno) == '\0')
+ if (REGISTER_NAME (regnum) == NULL || *REGISTER_NAME (regnum) == '\0')
continue;
- regstart = REGISTER_BYTE (regno);
- regend = regstart + REGISTER_RAW_SIZE (regno);
+ regstart = REGISTER_BYTE (regnum);
+ regend = regstart + REGISTER_RAW_SIZE (regnum);
if (regend <= inregbyte || inregend <= regstart)
- /* The range the user wants to read doesn't overlap with regno. */
+ /* The range the user wants to read doesn't overlap with regnum. */
continue;
/* We've found an uncached register where at least one byte will be read.
Update it from the target. */
- if (regno < NUM_REGS)
- target_fetch_registers (regno);
- else if (regno < NUM_REGS + NUM_PSEUDO_REGS)
- FETCH_PSEUDO_REGISTER (regno);
+ fetch_register (regnum);
- if (!register_valid[regno])
- error ("read_register_bytes: Couldn't update register %d.", regno);
+ if (!register_cached (regnum))
+ {
+ /* Sometimes pseudoregs are never marked valid, so that they
+ will be fetched every time (it can be complicated to know
+ if a pseudoreg is valid, while "fetching" them can be cheap).
+ */
+ if (regnum < NUM_REGS)
+ error ("read_register_bytes: Couldn't update register %d.", regnum);
+ }
}
if (myaddr != NULL)
- memcpy (myaddr, ®isters[inregbyte], inlen);
+ memcpy (myaddr, register_buffer (-1) + inregbyte, inlen);
}
-/* Read register REGNO into memory at MYADDR, which must be large
- enough for REGISTER_RAW_BYTES (REGNO). Target byte-order. If the
+/* Read register REGNUM into memory at MYADDR, which must be large
+ enough for REGISTER_RAW_BYTES (REGNUM). Target byte-order. If the
register is known to be the size of a CORE_ADDR or smaller,
read_register can be used instead. */
void
-read_register_gen (int regno, char *myaddr)
+read_register_gen (int regnum, char *myaddr)
{
if (registers_pid != inferior_pid)
{
registers_pid = inferior_pid;
}
- if (!register_valid[regno])
- {
- if (regno < NUM_REGS)
- target_fetch_registers (regno);
- else if (regno < NUM_REGS + NUM_PSEUDO_REGS)
- FETCH_PSEUDO_REGISTER (regno);
- }
- memcpy (myaddr, ®isters[REGISTER_BYTE (regno)],
- REGISTER_RAW_SIZE (regno));
+ if (!register_cached (regnum))
+ fetch_register (regnum);
+
+ memcpy (myaddr, register_buffer (regnum),
+ REGISTER_RAW_SIZE (regnum));
}
-/* Write register REGNO at MYADDR to the target. MYADDR points at
- REGISTER_RAW_BYTES(REGNO), which must be in target byte-order. */
+/* Write register REGNUM at MYADDR to the target. MYADDR points at
+ REGISTER_RAW_BYTES(REGNUM), which must be in target byte-order. */
/* Registers we shouldn't try to store. */
#if !defined (CANNOT_STORE_REGISTER)
-#define CANNOT_STORE_REGISTER(regno) 0
+#define CANNOT_STORE_REGISTER(regnum) 0
#endif
void
-write_register_gen (int regno, char *myaddr)
+write_register_gen (int regnum, char *myaddr)
{
int size;
/* On the sparc, writing %g0 is a no-op, so we don't even want to
change the registers array if something writes to this register. */
- if (CANNOT_STORE_REGISTER (regno))
+ if (CANNOT_STORE_REGISTER (regnum))
return;
if (registers_pid != inferior_pid)
registers_pid = inferior_pid;
}
- size = REGISTER_RAW_SIZE (regno);
+ size = REGISTER_RAW_SIZE (regnum);
/* If we have a valid copy of the register, and new value == old value,
then don't bother doing the actual store. */
- if (register_valid[regno]
- && memcmp (®isters[REGISTER_BYTE (regno)], myaddr, size) == 0)
+ if (register_cached (regnum)
+ && memcmp (register_buffer (regnum), myaddr, size) == 0)
return;
- if (regno < NUM_REGS)
+ if (real_register (regnum))
target_prepare_to_store ();
- memcpy (®isters[REGISTER_BYTE (regno)], myaddr, size);
-
- register_valid[regno] = 1;
+ memcpy (register_buffer (regnum), myaddr, size);
- if (regno < NUM_REGS)
- target_store_registers (regno);
- else if (regno < NUM_REGS + NUM_PSEUDO_REGS)
- STORE_PSEUDO_REGISTER (regno);
+ set_register_cached (regnum, 1);
+ store_register (regnum);
}
/* Copy INLEN bytes of consecutive data from memory at MYADDR
write_register_bytes (int myregstart, char *myaddr, int inlen)
{
int myregend = myregstart + inlen;
- int regno;
+ int regnum;
target_prepare_to_store ();
nice things like handling threads, and avoiding updates when the
new and old contents are the same. */
- for (regno = 0; regno < NUM_REGS + NUM_PSEUDO_REGS; regno++)
+ for (regnum = 0; regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
{
int regstart, regend;
- regstart = REGISTER_BYTE (regno);
- regend = regstart + REGISTER_RAW_SIZE (regno);
+ regstart = REGISTER_BYTE (regnum);
+ regend = regstart + REGISTER_RAW_SIZE (regnum);
/* Is this register completely outside the range the user is writing? */
if (myregend <= regstart || regend <= myregstart)
/* Is this register completely within the range the user is writing? */
else if (myregstart <= regstart && regend <= myregend)
- write_register_gen (regno, myaddr + (regstart - myregstart));
+ write_register_gen (regnum, myaddr + (regstart - myregstart));
/* The register partially overlaps the range being written. */
else
{
- char regbuf[MAX_REGISTER_RAW_SIZE];
+ char *regbuf = (char*) alloca (MAX_REGISTER_RAW_SIZE);
/* What's the overlap between this register's bytes and
those the caller wants to write? */
int overlapstart = max (regstart, myregstart);
/* We may be doing a partial update of an invalid register.
Update it from the target before scribbling on it. */
- read_register_gen (regno, regbuf);
+ read_register_gen (regnum, regbuf);
memcpy (registers + overlapstart,
myaddr + (overlapstart - myregstart),
overlapend - overlapstart);
- if (regno < NUM_REGS)
- target_store_registers (regno);
- else if (regno < NUM_REGS + NUM_PSEUDO_REGS)
- STORE_PSEUDO_REGISTER (regno);
+ store_register (regnum);
}
}
}
-/* Return the raw contents of register REGNO, regarding it as an
- UNSIGNED integer. */
+/* Return the contents of register REGNUM as an unsigned integer. */
ULONGEST
-read_register (int regno)
+read_register (int regnum)
{
if (registers_pid != inferior_pid)
{
registers_pid = inferior_pid;
}
- if (!register_valid[regno])
- {
- if (regno < NUM_REGS)
- target_fetch_registers (regno);
- else if (regno < NUM_REGS + NUM_PSEUDO_REGS)
- FETCH_PSEUDO_REGISTER (regno);
- }
+ if (!register_cached (regnum))
+ fetch_register (regnum);
- return (extract_unsigned_integer (®isters[REGISTER_BYTE (regno)],
- REGISTER_RAW_SIZE (regno)));
+ return (extract_unsigned_integer (register_buffer (regnum),
+ REGISTER_RAW_SIZE (regnum)));
}
ULONGEST
-read_register_pid (int regno, int pid)
+read_register_pid (int regnum, int pid)
{
int save_pid;
CORE_ADDR retval;
if (pid == inferior_pid)
- return read_register (regno);
+ return read_register (regnum);
save_pid = inferior_pid;
inferior_pid = pid;
- retval = read_register (regno);
+ retval = read_register (regnum);
inferior_pid = save_pid;
return retval;
}
-/* Return the raw contents of register REGNO, regarding it a SIGNED
- integer. */
+/* Return the contents of register REGNUM as a signed integer. */
LONGEST
-read_signed_register (int regno)
+read_signed_register (int regnum)
{
if (registers_pid != inferior_pid)
{
registers_pid = inferior_pid;
}
- if (!register_valid[regno])
- target_fetch_registers (regno);
+ if (!register_cached (regnum))
+ fetch_register (regnum);
- return (extract_signed_integer (®isters[REGISTER_BYTE (regno)],
- REGISTER_RAW_SIZE (regno)));
+ return (extract_signed_integer (register_buffer (regnum),
+ REGISTER_RAW_SIZE (regnum)));
}
LONGEST
-read_signed_register_pid (int regno, int pid)
+read_signed_register_pid (int regnum, int pid)
{
int save_pid;
LONGEST retval;
if (pid == inferior_pid)
- return read_signed_register (regno);
+ return read_signed_register (regnum);
save_pid = inferior_pid;
inferior_pid = pid;
- retval = read_signed_register (regno);
+ retval = read_signed_register (regnum);
inferior_pid = save_pid;
return retval;
}
-/* Store VALUE, into the raw contents of register number REGNO. */
+/* Store VALUE into the raw contents of register number REGNUM. */
void
-write_register (int regno, LONGEST val)
+write_register (int regnum, LONGEST val)
{
PTR buf;
int size;
/* On the sparc, writing %g0 is a no-op, so we don't even want to
change the registers array if something writes to this register. */
- if (CANNOT_STORE_REGISTER (regno))
+ if (CANNOT_STORE_REGISTER (regnum))
return;
if (registers_pid != inferior_pid)
registers_pid = inferior_pid;
}
- size = REGISTER_RAW_SIZE (regno);
+ size = REGISTER_RAW_SIZE (regnum);
buf = alloca (size);
store_signed_integer (buf, size, (LONGEST) val);
/* If we have a valid copy of the register, and new value == old value,
then don't bother doing the actual store. */
- if (register_valid[regno]
- && memcmp (®isters[REGISTER_BYTE (regno)], buf, size) == 0)
+ if (register_cached (regnum)
+ && memcmp (register_buffer (regnum), buf, size) == 0)
return;
- if (regno < NUM_REGS)
+ if (real_register (regnum))
target_prepare_to_store ();
- memcpy (®isters[REGISTER_BYTE (regno)], buf, size);
-
- register_valid[regno] = 1;
+ memcpy (register_buffer (regnum), buf, size);
- if (regno < NUM_REGS)
- target_store_registers (regno);
- else if (regno < NUM_REGS + NUM_PSEUDO_REGS)
- STORE_PSEUDO_REGISTER (regno);
+ set_register_cached (regnum, 1);
+ store_register (regnum);
}
void
-write_register_pid (int regno, CORE_ADDR val, int pid)
+write_register_pid (int regnum, CORE_ADDR val, int pid)
{
int save_pid;
if (pid == inferior_pid)
{
- write_register (regno, val);
+ write_register (regnum, val);
return;
}
inferior_pid = pid;
- write_register (regno, val);
+ write_register (regnum, val);
inferior_pid = save_pid;
}
/* SUPPLY_REGISTER()
- Record that register REGNO contains VAL. This is used when the
+ Record that register REGNUM contains VAL. This is used when the
value is obtained from the inferior or core dump, so there is no
need to store the value there.
If VAL is a NULL pointer, then it's probably an unsupported register.
- We just set it's value to all zeros. We might want to record this
+ We just set its value to all zeros. We might want to record this
fact, and report it to the users of read_register and friends. */
void
-supply_register (int regno, char *val)
+supply_register (int regnum, char *val)
{
#if 1
if (registers_pid != inferior_pid)
}
#endif
- register_valid[regno] = 1;
+ set_register_cached (regnum, 1);
if (val)
- memcpy (®isters[REGISTER_BYTE (regno)], val,
- REGISTER_RAW_SIZE (regno));
+ memcpy (register_buffer (regnum), val,
+ REGISTER_RAW_SIZE (regnum));
else
- memset (®isters[REGISTER_BYTE (regno)], '\000',
- REGISTER_RAW_SIZE (regno));
+ memset (register_buffer (regnum), '\000',
+ REGISTER_RAW_SIZE (regnum));
/* On some architectures, e.g. HPPA, there are a few stray bits in
some registers, that the rest of the code would like to ignore. */
#ifdef CLEAN_UP_REGISTER_VALUE
- CLEAN_UP_REGISTER_VALUE (regno, ®isters[REGISTER_BYTE (regno)]);
+ CLEAN_UP_REGISTER_VALUE (regnum, register_buffer (regnum));
#endif
}
/* read_pc, write_pc, read_sp, write_sp, read_fp, write_fp, etc.
Special handling for registers PC, SP, and FP. */
+/* NOTE: cagney/2001-02-18: The functions generic_target_read_pc(),
+ read_pc_pid(), read_pc(), generic_target_write_pc(),
+ write_pc_pid(), write_pc(), generic_target_read_sp(), read_sp(),
+ generic_target_write_sp(), write_sp(), generic_target_read_fp(),
+ read_fp(), generic_target_write_fp(), write_fp will eventually be
+ moved out of the reg-cache into either frame.[hc] or to the
+ multi-arch framework. The are not part of the raw register cache. */
+
/* This routine is getting awfully cluttered with #if's. It's probably
time to turn this into READ_PC and define it in the tm.h file.
Ditto for write_pc.
1999-06-08: The following were re-written so that it assumes the
- existance of a TARGET_READ_PC et.al. macro. A default generic
+ existence of a TARGET_READ_PC et.al. macro. A default generic
version of that macro is made available where needed.
Since the ``TARGET_READ_PC'' et.al. macro is going to be controlled
return pc_val;
}
#endif
- internal_error ("generic_target_read_pc");
+ internal_error (__FILE__, __LINE__,
+ "generic_target_read_pc");
return 0;
}
if (NNPC_REGNUM >= 0)
write_register_pid (NNPC_REGNUM, pc + 8, pid);
#else
- internal_error ("generic_target_write_pc");
+ internal_error (__FILE__, __LINE__,
+ "generic_target_write_pc");
#endif
}
if (SP_REGNUM >= 0)
return read_register (SP_REGNUM);
#endif
- internal_error ("generic_target_read_sp");
+ internal_error (__FILE__, __LINE__,
+ "generic_target_read_sp");
}
CORE_ADDR
return;
}
#endif
- internal_error ("generic_target_write_sp");
+ internal_error (__FILE__, __LINE__,
+ "generic_target_write_sp");
}
void
if (FP_REGNUM >= 0)
return read_register (FP_REGNUM);
#endif
- internal_error ("generic_target_read_fp");
+ internal_error (__FILE__, __LINE__,
+ "generic_target_read_fp");
}
CORE_ADDR
return;
}
#endif
- internal_error ("generic_target_write_fp");
+ internal_error (__FILE__, __LINE__,
+ "generic_target_write_fp");
}
void
TARGET_WRITE_FP (val);
}
+/* ARGSUSED */
+static void
+reg_flush_command (char *command, int from_tty)
+{
+ /* Force-flush the register cache. */
+ registers_changed ();
+ if (from_tty)
+ printf_filtered ("Register cache flushed.\n");
+}
+
+
static void
build_regcache (void)
{
register_gdbarch_swap (®isters, sizeof (registers), NULL);
register_gdbarch_swap (®ister_valid, sizeof (register_valid), NULL);
register_gdbarch_swap (NULL, 0, build_regcache);
+
+ add_com ("flushregs", class_maintenance, reg_flush_command,
+ "Force gdb to flush its register cache (maintainer command)");
}