You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
/* This is like remote.c but is for an esoteric situation--
having a 29k board attached to an Adapt inline monitor.
o - I can't get 19200 baud rate to work.
7/91 o - Freeze mode tracing can be done on a 29050. */
+
+
#include "defs.h"
-#include <string.h>
+#include "gdb_string.h"
#include "inferior.h"
#include "wait.h"
#include "value.h"
#include "target.h"
#include "gdbcore.h"
+/* This processor is getting rusty but I am trying to keep it
+ up to date at least with data structure changes.
+ Activate this block to compile just this file.
+ */
+#define COMPILE_CHECK 0
+#if COMPILE_CHECK
+#define Q_REGNUM 0
+#define VAB_REGNUM 0
+#define CPS_REGNUM 0
+#define IPA_REGNUM 0
+#define IPB_REGNUM 0
+#define GR1_REGNUM 0
+#define LR0_REGNUM 0
+#define IPC_REGNUM 0
+#define CR_REGNUM 0
+#define BP_REGNUM 0
+#define FC_REGNUM 0
+#define INTE_REGNUM 0
+#define EXO_REGNUM 0
+#define GR96_REGNUM 0
+#define NPC_REGNUM
+#define FPE_REGNUM 0
+#define PC2_REGNUM 0
+#define FPS_REGNUM 0
+#define ALU_REGNUM 0
+#define LRU_REGNUM 0
+#define TERMINAL int
+#define RAW 1
+#define ANYP 1
+extern int a29k_freeze_mode ;
+extern int processor_type ;
+extern char * processor_name ;
+#endif
+
/* External data declarations */
extern int stop_soon_quietly; /* for wait_for_inferior */
int desc;
int turnon;
{
+
TERMINAL sg;
if (desc < 0)
error ("Can't pass arguments to remote adapt process.");
if (execfile == 0 || exec_bfd == 0)
- error ("No exec file specified");
+ error ("No executable file specified");
entry_pt = (int) bfd_get_start_address (exec_bfd);
error ("\
Please include the name of the device for the serial port,\n\
the baud rate, and the name of the program to run on the remote system.");
- dev_name = (char*)malloc(p - name + 1);
+ dev_name = (char*)xmalloc(p - name + 1);
strncpy (dev_name, name, p - name);
dev_name[p - name] = '\0';
if (adapt_desc < 0)
perror_with_name (dev_name);
ioctl (adapt_desc, TIOCGETP, &sg);
+#if ! defined(COMPILE_CHECK)
#ifdef HAVE_TERMIO
sg.c_cc[VMIN] = 0; /* read with timeout. */
sg.c_cc[VTIME] = timeout * 10;
ioctl (adapt_desc, TIOCSETP, &sg);
adapt_stream = fdopen (adapt_desc, "r+");
-
+#endif /* compile_check */
push_target (&adapt_ops);
#ifndef HAVE_TERMIO
printf_filtered("Remote debugging using virtual addresses works only\n");
printf_filtered("\twhen virtual addresses map 1:1 to physical addresses.\n");
if (processor_type != a29k_freeze_mode) {
- fprintf_filtered(stderr,
+ fprintf_filtered(gdb_stderr,
"Freeze-mode debugging not available, and can only be done on an A29050.\n");
}
}
expect_prompt ();
return(0); /* Success */
} else {
- fprintf_filtered(stderr,
+ fprintf_filtered(gdb_stderr,
"Too many break points, break point not installed\n");
return(1); /* Failure */
}
/* Define the target subroutine names */
-struct target_ops adapt_ops = {
- "adapt", "Remote AMD `Adapt' target",
- "Remote debug an AMD 290*0 using an `Adapt' monitor via RS232",
- adapt_open, adapt_close,
- adapt_attach, adapt_detach, adapt_resume, adapt_wait,
- adapt_fetch_register, adapt_store_register,
- adapt_prepare_to_store,
- adapt_xfer_inferior_memory,
- adapt_files_info,
- adapt_insert_breakpoint, adapt_remove_breakpoint, /* Breakpoints */
- 0, 0, 0, 0, 0, /* Terminal handling */
- adapt_kill, /* FIXME, kill */
- adapt_load,
- 0, /* lookup_symbol */
- adapt_create_inferior, /* create_inferior */
- adapt_mourn, /* mourn_inferior FIXME */
- 0, /* can_run */
- 0, /* notice_signals */
- process_stratum, 0, /* next */
- 1, 1, 1, 1, 1, /* all mem, mem, stack, regs, exec */
- 0,0, /* Section pointers */
- OPS_MAGIC, /* Always the last thing */
-};
+struct target_ops adapt_ops ;
+
+static void
+init_adapt_ops(void)
+{
+ adapt_ops.to_shortname = "adapt";
+ adapt_ops.to_longname = "Remote AMD `Adapt' target";
+ adapt_ops.to_doc = "Remote debug an AMD 290*0 using an `Adapt' monitor via RS232";
+ adapt_ops.to_open = adapt_open;
+ adapt_ops.to_close = adapt_close;
+ adapt_ops.to_attach = adapt_attach;
+ adapt_ops.to_post_attach = NULL;
+ adapt_ops.to_require_attach = NULL;
+ adapt_ops.to_detach = adapt_detach;
+ adapt_ops.to_require_detach = NULL;
+ adapt_ops.to_resume = adapt_resume;
+ adapt_ops.to_wait = adapt_wait;
+ adapt_ops.to_post_wait = NULL;
+ adapt_ops.to_fetch_registers = adapt_fetch_register;
+ adapt_ops.to_store_registers = adapt_store_register;
+ adapt_ops.to_prepare_to_store = adapt_prepare_to_store;
+ adapt_ops.to_xfer_memory = adapt_xfer_inferior_memory;
+ adapt_ops.to_files_info = adapt_files_info;
+ adapt_ops.to_insert_breakpoint = adapt_insert_breakpoint;
+ adapt_ops.to_remove_breakpoint = adapt_remove_breakpoint;
+ adapt_ops.to_terminal_init = 0;
+ adapt_ops.to_terminal_inferior = 0;
+ adapt_ops.to_terminal_ours_for_output = 0;
+ adapt_ops.to_terminal_ours = 0;
+ adapt_ops.to_terminal_info = 0;
+ adapt_ops.to_kill = adapt_kill;
+ adapt_ops.to_load = adapt_load;
+ adapt_ops.to_lookup_symbol = 0;
+ adapt_ops.to_create_inferior = adapt_create_inferior;
+ adapt_ops.to_post_startup_inferior = NULL;
+ adapt_ops.to_acknowledge_created_inferior = NULL;
+ adapt_ops.to_clone_and_follow_inferior = NULL;
+ adapt_ops.to_post_follow_inferior_by_clone = NULL;
+ adapt_ops.to_insert_fork_catchpoint = NULL;
+ adapt_ops.to_remove_fork_catchpoint = NULL;
+ adapt_ops.to_insert_vfork_catchpoint = NULL;
+ adapt_ops.to_remove_vfork_catchpoint = NULL;
+ adapt_ops.to_has_forked = NULL;
+ adapt_ops.to_has_vforked = NULL;
+ adapt_ops.to_can_follow_vfork_prior_to_exec = NULL;
+ adapt_ops.to_post_follow_vfork = NULL;
+ adapt_ops.to_insert_exec_catchpoint = NULL;
+ adapt_ops.to_remove_exec_catchpoint = NULL;
+ adapt_ops.to_has_execd = NULL;
+ adapt_ops.to_reported_exec_events_per_exec_call = NULL;
+ adapt_ops.to_has_exited = NULL;
+ adapt_ops.to_mourn_inferior = adapt_mourn;
+ adapt_ops.to_can_run = 0;
+ adapt_ops.to_notice_signals = 0;
+ adapt_ops.to_thread_alive = 0;
+ adapt_ops.to_stop = 0 ; /* process_stratum; */
+ adapt_ops.to_pid_to_exec_file = NULL;
+ adapt_ops.to_core_file_to_sym_file = NULL;
+ adapt_ops.to_stratum = 0;
+ adapt_ops.DONT_USE = 0 ;
+ adapt_ops.to_has_all_memory = 1;
+ adapt_ops.to_has_memory = 1;
+ adapt_ops.to_has_stack = 1;
+ adapt_ops.to_has_registers = 1;
+ adapt_ops.to_has_execution = 0;
+ adapt_ops.to_sections = 0;
+ adapt_ops.to_sections_end = 0 ;
+ adapt_ops.to_magic = OPS_MAGIC;
+} /* init_adapt_ops */
void
_initialize_remote_adapt ()
{
+ init_adapt_ops() ;
add_target (&adapt_ops);
add_com ("adapt <command>", class_obscure, adapt_com,
"Send a command to the AMD Adapt remote monitor.");