#else
#include <varargs.h>
#endif
+#include <ctype.h>
#include <signal.h>
#include <sys/types.h>
#include "gdb_string.h"
extern int baud_rate;
-static const char hexchars[]="0123456789abcdef";
-static char *hex2mem();
-
-#define SREC_SIZE 160
#define ARRAY_PROMPT ">> "
#define SWAP_TARGET_AND_HOST(buffer,len) \
extern char *tmp_mips_processor_type;
extern int mips_set_processor_type();
-static struct target_ops array_ops = {
- "array", /* to_shortname */
- /* to_longname */
- "Debug using the standard GDB remote protocol for the Array Tech target.",
- /* to_doc */
- "Debug using the standard GDB remote protocol for the Array Tech target.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",
- array_open, /* to_open */
- array_close, /* to_close */
- NULL, /* to_attach */
- array_detach, /* to_detach */
- array_resume, /* to_resume */
- array_wait, /* to_wait */
- array_fetch_registers, /* to_fetch_registers */
- array_store_registers, /* to_store_registers */
- array_prepare_to_store, /* to_prepare_to_store */
- array_xfer_memory, /* to_xfer_memory */
- array_files_info, /* to_files_info */
- array_insert_breakpoint, /* to_insert_breakpoint */
- array_remove_breakpoint, /* to_remove_breakpoint */
- 0, /* to_terminal_init */
- 0, /* to_terminal_inferior */
- 0, /* to_terminal_ours_for_output */
- 0, /* to_terminal_ours */
- 0, /* to_terminal_info */
- array_kill, /* to_kill */
- 0, /* to_load */
- 0, /* to_lookup_symbol */
- array_create_inferior, /* to_create_inferior */
- array_mourn_inferior, /* to_mourn_inferior */
- 0, /* to_can_run */
- 0, /* to_notice_signals */
- 0, /* to_thread_alive */
- 0, /* to_stop */
- process_stratum, /* to_stratum */
- 0, /* to_next */
- 1, /* to_has_all_memory */
- 1, /* to_has_memory */
- 1, /* to_has_stack */
- 1, /* to_has_registers */
- 1, /* to_has_execution */
- 0, /* sections */
- 0, /* sections_end */
- OPS_MAGIC /* to_magic */
+static struct target_ops array_ops ;
+static void init_array_ops(void)
+{
+ array_ops.to_shortname = "array";
+ array_ops.to_longname =
+ "Debug using the standard GDB remote protocol for the Array Tech target.",
+ array_ops.to_doc =
+ "Debug using the standard GDB remote protocol for the Array Tech target.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya)." ;
+ array_ops.to_open = array_open;
+ array_ops.to_close = array_close;
+ array_ops.to_attach = NULL;
+ array_ops.to_detach = array_detach;
+ array_ops.to_resume = array_resume;
+ array_ops.to_wait = array_wait;
+ array_ops.to_fetch_registers = array_fetch_registers;
+ array_ops.to_store_registers = array_store_registers;
+ array_ops.to_prepare_to_store = array_prepare_to_store;
+ array_ops.to_xfer_memory = array_xfer_memory;
+ array_ops.to_files_info = array_files_info;
+ array_ops.to_insert_breakpoint = array_insert_breakpoint;
+ array_ops.to_remove_breakpoint = array_remove_breakpoint;
+ array_ops.to_terminal_init = 0;
+ array_ops.to_terminal_inferior = 0;
+ array_ops.to_terminal_ours_for_output = 0;
+ array_ops.to_terminal_ours = 0;
+ array_ops.to_terminal_info = 0;
+ array_ops.to_kill = array_kill;
+ array_ops.to_load = 0;
+ array_ops.to_lookup_symbol = 0;
+ array_ops.to_create_inferior = array_create_inferior;
+ array_ops.to_mourn_inferior = array_mourn_inferior;
+ array_ops.to_can_run = 0;
+ array_ops.to_notice_signals = 0;
+ array_ops.to_thread_alive = 0;
+ array_ops.to_stop = 0;
+ array_ops.to_stratum = process_stratum;
+ array_ops.DONT_USE = 0;
+ array_ops.to_has_all_memory = 1;
+ array_ops.to_has_memory = 1;
+ array_ops.to_has_stack = 1;
+ array_ops.to_has_registers = 1;
+ array_ops.to_has_execution = 1;
+ array_ops.to_sections = 0;
+ array_ops.to_sections_end = 0;
+ array_ops.to_magic = OPS_MAGIC;
};
/*
error("Can't pass arguments to remote MONITOR process");
if (execfile == 0 || exec_bfd == 0)
- error("No exec file specified");
+ error("No executable file specified");
entry_pt = (int) bfd_get_start_address (exec_bfd);
timeout = 0; /* Don't time out -- user program is running. */
-#if !defined(__GO32__) && !defined(__MSDOS__) && !defined(__WIN32__)
+#if !defined(__GO32__) && !defined(__MSDOS__) && !defined(_WIN32)
tty_desc = SERIAL_FDOPEN (0);
ttystate = SERIAL_GET_TTY_STATE (tty_desc);
SERIAL_RAW (tty_desc);
/* do this so it looks like there's keyboard echo */
if (c == 3) /* exit on Control-C */
break;
+#if 0
fputc_unfiltered (c, gdb_stdout);
fflush (stdout);
+#endif
}
}
SERIAL_SET_TTY_STATE (tty_desc, ttystate);
char *myaddr;
int len;
{
- int i, j;
+ int j;
char buf[20];
char packet[PBUFSIZ];
-
- /* Number of bytes read so far. */
- int count;
-
- /* Starting address of this pass. */
- unsigned long startaddr;
-
- /* Starting address of this pass. */
- unsigned long endaddr;
-
- /* Number of bytes to read in this pass. */
- int len_this_pass;
+ int count; /* Number of bytes read so far. */
+ unsigned long startaddr; /* Starting address of this pass. */
+ int len_this_pass; /* Number of bytes to read in this pass. */
debuglogs (1, "array_read_inferior_memory (memaddr=0x%x, myaddr=0x%x, len=%d)", memaddr, myaddr, len);
return 0;
}
- startaddr = memaddr;
- count = 0;
- while (count < len) {
- len_this_pass = 16;
- if ((startaddr % 16) != 0)
- len_this_pass -= startaddr % 16;
- if (len_this_pass > (len - count))
- len_this_pass = (len - count);
-
- debuglogs (3, "Display %d bytes at %x for Big Endian host", len_this_pass, startaddr);
-
- for (i = 0; i < len_this_pass; i++) {
+ for (count = 0, startaddr = memaddr; count < len; startaddr += len_this_pass)
+ {
+ /* Try to align to 16 byte boundry (why?) */
+ len_this_pass = 16;
+ if ((startaddr % 16) != 0)
+ {
+ len_this_pass -= startaddr % 16;
+ }
+ /* Only transfer bytes we need */
+ if (len_this_pass > (len - count))
+ {
+ len_this_pass = (len - count);
+ }
+ /* Fetch the bytes */
+ debuglogs (3, "read %d bytes from inferior address %x", len_this_pass,
+ startaddr);
sprintf (buf, "m%08x,%04x", startaddr, len_this_pass);
make_gdb_packet (packet, buf);
if (array_send_packet (packet) == 0)
- error ("Couldn't transmit packet\n");
+ {
+ error ("Couldn't transmit packet\n");
+ }
if (array_get_packet (packet) == 0)
- error ("Couldn't receive packet\n");
+ {
+ error ("Couldn't receive packet\n");
+ }
if (*packet == 0)
- error ("Got no data in the GDB packet\n");
- debuglogs (4, "array_read_inferior: Got a \"%s\" back\n", packet);
- for (j = 0; j < len_this_pass ; j++) { /* extract the byte values */
- myaddr[count++] = from_hex (*(packet+(j*2))) * 16 + from_hex (*(packet+(j*2)+1));
- debuglogs (5, "myaddr set to %x\n", myaddr[count-1]);
- }
- startaddr += 1;
+ {
+ error ("Got no data in the GDB packet\n");
+ }
+ /* Pick packet apart and xfer bytes to myaddr */
+ debuglogs (4, "array_read_inferior_memory: Got a \"%s\" back\n", packet);
+ for (j = 0; j < len_this_pass ; j++)
+ {
+ /* extract the byte values */
+ myaddr[count++] = from_hex (*(packet+(j*2))) * 16 + from_hex (*(packet+(j*2)+1));
+ debuglogs (5, "myaddr[%d] set to %x\n", count-1, myaddr[count-1]);
+ }
}
-
- }
- return len;
+ return (count);
}
/* FIXME-someday! merge these two. */
void
_initialize_array ()
{
+ init_array_ops() ;
add_target (&array_ops);
}
projects / deliverable / binutils-gdb.git / blobdiff