-/* Remote debugging interface for Hitachi E7000 ICE, for GDB
+/* Remote debugging interface for Renesas E7000 ICE, for GDB
Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
- 2002 Free Software Foundation, Inc.
+ 2002, 2003 Free Software Foundation, Inc.
Contributed by Cygnus Support.
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-/* The E7000 is an in-circuit emulator for the Hitachi H8/300-H and
- Hitachi-SH processor. It has serial port and a lan port.
+/* The E7000 is an in-circuit emulator for the Renesas H8/300-H and
+ Renesas-SH processor. It has serial port and a lan port.
The monitor command set makes it difficult to load large ammounts of
data over the lan without using ftp - so try not to issue load
flush_cached_frames ();
registers_changed ();
stop_pc = read_pc ();
- set_current_frame (create_new_frame (read_fp (), stop_pc));
- select_frame (get_current_frame ());
- print_stack_frame (selected_frame, -1, 1);
+ print_stack_frame (get_selected_frame (), -1, 1);
return 1;
}
}
serial_raw (e7000_desc);
-#ifdef GDB_TARGET_IS_H8300
- h8300hmode = 1;
-#endif
-
/* Start the remote connection; if error (0), discard this target.
In particular, if the user quits, be sure to discard it
(we'd be in an inconsistent state otherwise). */
return (high << 4) + low;
}
-void
+static void
fetch_regs_from_dump (int (*nextchar) (), char *want)
{
int regno;
- char buf[MAX_REGISTER_RAW_SIZE];
+ char buf[MAX_REGISTER_SIZE];
int thischar = nextchar ();
want++;
break;
#endif
-#ifdef FP_REGNUM
+#ifdef DEPRECATED_FP_REGNUM
case 'f':
- regno = FP_REGNUM;
+ regno = DEPRECATED_FP_REGNUM;
want++;
break;
#endif
internal_error (__FILE__, __LINE__, "failed internal consistency check");
}
store_signed_integer (buf,
- REGISTER_RAW_SIZE (regno),
+ DEPRECATED_REGISTER_RAW_SIZE (regno),
(LONGEST) get_hex (&thischar));
supply_register (regno, buf);
break;
wanted = want_sh3;
}
}
-#ifdef GDB_TARGET_IS_H8300
if (TARGET_ARCHITECTURE->arch == bfd_arch_h8300)
{
- if (h8300smode)
- wanted = want_h8300s;
- else
- wanted = want_h8300h;
+ wanted = want_h8300h;
+ switch (TARGET_ARCHITECTURE->mach)
+ {
+ case bfd_mach_h8300s:
+ case bfd_mach_h8300sn:
+ case bfd_mach_h8300sx:
+ case bfd_mach_h8300sxn:
+ wanted = want_h8300s;
+ }
}
-#endif
fetch_regs_from_dump (gch, wanted);
puts_e7000debug ("end\r");
putchar_e7000 (CTRLC);
- while ((c = readchar (1) != -1))
+ while ((c = readchar (1)) != -1)
{
if (quit_flag)
{
/* Suck characters, if a string match, then return the strings index
otherwise echo them. */
-int
+static int
expect_n (char **strings)
{
char *(ptr[10]);
char buf2[200];
store_signed_integer (buf,
- REGISTER_RAW_SIZE (PC_REGNUM),
+ DEPRECATED_REGISTER_RAW_SIZE (PC_REGNUM),
read_register (PC_REGNUM) - 2);
supply_register (PC_REGNUM, buf);
sprintf (buf2, ".PC %s\r", phex_nz (read_register (PC_REGNUM), 0));
wanted_nopc = want_nopc_sh3;
}
}
-#ifdef GDB_TARGET_IS_H8300
if (TARGET_ARCHITECTURE->arch == bfd_arch_h8300)
{
- if (h8300smode)
- wanted_nopc = want_nopc_h8300s;
- else
- wanted_nopc = want_nopc_h8300h;
+ wanted_nopc = want_nopc_h8300h;
+ switch (TARGET_ARCHITECTURE->mach)
+ {
+ case bfd_mach_h8300s:
+ case bfd_mach_h8300sn:
+ case bfd_mach_h8300sx:
+ case bfd_mach_h8300sxn:
+ wanted_nopc = want_nopc_h8300s;
+ }
}
-#endif
fetch_regs_from_dump (gch, wanted_nopc);
/* And supply the extra ones the simulator uses */
init_e7000_ops (void)
{
e7000_ops.to_shortname = "e7000";
- e7000_ops.to_longname = "Remote Hitachi e7000 target";
- e7000_ops.to_doc = "Use a remote Hitachi e7000 ICE connected by a serial line;\n\
+ e7000_ops.to_longname = "Remote Renesas e7000 target";
+ e7000_ops.to_doc = "Use a remote Renesas e7000 ICE connected by a serial line;\n\
or a network connection.\n\
Arguments are the name of the device for the serial line,\n\
the speed to connect at in bits per second.\n\
target e7000 foobar";
e7000_ops.to_open = e7000_open;
e7000_ops.to_close = e7000_close;
- e7000_ops.to_attach = 0;
- e7000_ops.to_post_attach = NULL;
- e7000_ops.to_require_attach = NULL;
e7000_ops.to_detach = e7000_detach;
- e7000_ops.to_require_detach = NULL;
e7000_ops.to_resume = e7000_resume;
e7000_ops.to_wait = e7000_wait;
- e7000_ops.to_post_wait = NULL;
e7000_ops.to_fetch_registers = e7000_fetch_register;
e7000_ops.to_store_registers = e7000_store_register;
e7000_ops.to_prepare_to_store = e7000_prepare_to_store;
e7000_ops.to_files_info = e7000_files_info;
e7000_ops.to_insert_breakpoint = e7000_insert_breakpoint;
e7000_ops.to_remove_breakpoint = e7000_remove_breakpoint;
- e7000_ops.to_terminal_init = 0;
- e7000_ops.to_terminal_inferior = 0;
- e7000_ops.to_terminal_ours_for_output = 0;
- e7000_ops.to_terminal_ours = 0;
- e7000_ops.to_terminal_info = 0;
e7000_ops.to_kill = e7000_kill;
e7000_ops.to_load = e7000_load;
- e7000_ops.to_lookup_symbol = 0;
e7000_ops.to_create_inferior = e7000_create_inferior;
- e7000_ops.to_post_startup_inferior = NULL;
- e7000_ops.to_acknowledge_created_inferior = NULL;
- e7000_ops.to_clone_and_follow_inferior = NULL;
- e7000_ops.to_post_follow_inferior_by_clone = NULL;
- e7000_ops.to_insert_fork_catchpoint = NULL;
- e7000_ops.to_remove_fork_catchpoint = NULL;
- e7000_ops.to_insert_vfork_catchpoint = NULL;
- e7000_ops.to_remove_vfork_catchpoint = NULL;
- e7000_ops.to_has_forked = NULL;
- e7000_ops.to_has_vforked = NULL;
- e7000_ops.to_can_follow_vfork_prior_to_exec = NULL;
- e7000_ops.to_post_follow_vfork = NULL;
- e7000_ops.to_insert_exec_catchpoint = NULL;
- e7000_ops.to_remove_exec_catchpoint = NULL;
- e7000_ops.to_has_execd = NULL;
- e7000_ops.to_reported_exec_events_per_exec_call = NULL;
- e7000_ops.to_has_exited = NULL;
e7000_ops.to_mourn_inferior = e7000_mourn_inferior;
- e7000_ops.to_can_run = 0;
- e7000_ops.to_notice_signals = 0;
- e7000_ops.to_thread_alive = 0;
e7000_ops.to_stop = e7000_stop;
- e7000_ops.to_pid_to_exec_file = NULL;
e7000_ops.to_stratum = process_stratum;
- e7000_ops.DONT_USE = 0;
e7000_ops.to_has_all_memory = 1;
e7000_ops.to_has_memory = 1;
e7000_ops.to_has_stack = 1;
e7000_ops.to_has_registers = 1;
e7000_ops.to_has_execution = 1;
- e7000_ops.to_sections = 0;
- e7000_ops.to_sections_end = 0;
e7000_ops.to_magic = OPS_MAGIC;
};
+extern initialize_file_ftype _initialize_remote_e7000; /* -Wmissing-prototypes */
+
void
_initialize_remote_e7000 (void)
{
projects / deliverable / binutils-gdb.git / blobdiff