#include "terminal.h"
#include "target.h"
#include "gdbcore.h"
+#include "serial.h"
/* External data declarations */
-extern int stop_soon_quietly; /* for wait_for_inferior */
+extern int stop_soon_quietly; /* for wait_for_inferior */
/* Forward data declarations */
-extern struct target_ops hms_ops; /* Forward declaration */
+extern struct target_ops hms_ops; /* Forward declaration */
/* Forward function declarations */
static void hms_fetch_registers ();
-static int hms_store_registers ();
+static int hms_store_registers ();
static void hms_close ();
-static int hms_clear_breakpoints();
+static int hms_clear_breakpoints ();
extern struct target_ops hms_ops;
static int quiet = 1;
-#ifdef DEBUG
-# define DENTER(NAME) if (!quiet) (printf_filtered("Entering %s\n",NAME), fflush(stdout))
-# define DEXIT(NAME) if (!quiet) (printf_filtered("Exiting %s\n",NAME), fflush(stdout))
-#else
-# define DENTER(NAME)
-# define DEXIT(NAME)
-#endif
+serial_t desc;
/***********************************************************************/
/* Caching stuff stolen from remote-nindy.c */
Each cache block holds LINE_SIZE bytes of data
starting at a multiple-of-LINE_SIZE address. */
-
#define LINE_SIZE_POWER 4
-#define LINE_SIZE (1<<LINE_SIZE_POWER) /* eg 1<<3 == 8 */
-#define LINE_SIZE_MASK ((LINE_SIZE-1)) /* eg 7*2+1= 111*/
+#define LINE_SIZE (1<<LINE_SIZE_POWER) /* eg 1<<3 == 8 */
+#define LINE_SIZE_MASK ((LINE_SIZE-1)) /* eg 7*2+1= 111*/
#define DCACHE_SIZE 64 /* Number of cache blocks */
#define XFORM(x) ((x&LINE_SIZE_MASK)>>2)
-struct dcache_block {
- struct dcache_block *next, *last;
- unsigned int addr; /* Address for which data is recorded. */
- int data[LINE_SIZE/sizeof(int)];
-};
+struct dcache_block
+ {
+ struct dcache_block *next, *last;
+ unsigned int addr; /* Address for which data is recorded. */
+ int data[LINE_SIZE / sizeof (int)];
+ };
struct dcache_block dcache_free, dcache_valid;
-/* Free all the data cache blocks, thus discarding all cached data. */
+/* Free all the data cache blocks, thus discarding all cached data. */
static
void
dcache_flush ()
db = dcache_valid.next;
while (db != &dcache_valid)
{
- if ((addr & ~LINE_SIZE_MASK)== db->addr)
+ if ((addr & ~LINE_SIZE_MASK) == db->addr)
return db;
db = db->next;
}
{
if (addr & 3)
abort ();
- return (db->data[XFORM(addr)]);
+ return (db->data[XFORM (addr)]);
}
/* Get a free cache block, put or keep it on the valid list,
{
db = dcache_alloc ();
immediate_quit++;
- hms_read_inferior_memory(addr & ~LINE_SIZE_MASK, (unsigned char *)db->data, LINE_SIZE);
+ hms_read_inferior_memory (addr & ~LINE_SIZE_MASK, (unsigned char *) db->data, LINE_SIZE);
immediate_quit--;
db->addr = addr & ~LINE_SIZE_MASK;
- remque (db); /* Off the free list */
+ remque (db); /* Off the free list */
insque (db, &dcache_valid); /* On the valid list */
}
return (dcache_value (db, addr));
/* First make sure the word is IN the cache. DB is its cache block. */
db = dcache_hit (addr);
if (db == 0)
- {
- db = dcache_alloc ();
- immediate_quit++;
- hms_write_inferior_memory(addr & ~LINE_SIZE_MASK, (unsigned char *)db->data, LINE_SIZE);
- immediate_quit--;
- db->addr = addr & ~LINE_SIZE_MASK;
- remque (db); /* Off the free list */
- insque (db, &dcache_valid); /* On the valid list */
- }
+ {
+ db = dcache_alloc ();
+ immediate_quit++;
+ hms_write_inferior_memory (addr & ~LINE_SIZE_MASK, (unsigned char *) db->data, LINE_SIZE);
+ immediate_quit--;
+ db->addr = addr & ~LINE_SIZE_MASK;
+ remque (db); /* Off the free list */
+ insque (db, &dcache_valid); /* On the valid list */
+ }
/* Modify the word in the cache. */
- db->data[XFORM(addr)] = data;
+ db->data[XFORM (addr)] = data;
/* Send the changed word. */
immediate_quit++;
- hms_write_inferior_memory(addr, (unsigned char *)&data, 4);
+ hms_write_inferior_memory (addr, (unsigned char *) &data, 4);
immediate_quit--;
}
db = the_cache;
dcache_free.next = dcache_free.last = &dcache_free;
dcache_valid.next = dcache_valid.last = &dcache_valid;
- for (i=0;i<DCACHE_SIZE;i++,db++)
+ for (i = 0; i < DCACHE_SIZE; i++, db++)
insque (db, &dcache_free);
}
-
/***********************************************************************
* I/O stuff stolen from remote-eb.c
***********************************************************************/
static int timeout = 2;
-static char *dev_name = "/dev/ttya";
-
-
+static const char *dev_name;
/* Descriptor for I/O to remote machine. Initialize it to -1 so that
hms_open knows that we don't have a file open when the program
starts. */
-int hms_desc = -1;
-#define OPEN(x) ((x) >= 0)
-
-
-void hms_open();
-#define ON 1
-#define OFF 0
-static void
-rawmode(desc, turnon)
-int desc;
-int turnon;
+int is_open = 0;
+int
+check_open ()
{
- TERMINAL sg;
-
- if (desc < 0)
- return;
-
- ioctl (desc, TIOCGETP, &sg);
-
- if (turnon) {
-#ifdef HAVE_TERMIO
- sg.c_lflag &= ~(ICANON);
-#else
- sg.sg_flags |= RAW;
-#endif
- } else {
-#ifdef HAVE_TERMIO
- sg.c_lflag |= ICANON;
-#else
- sg.sg_flags &= ~(RAW);
-#endif
- }
- ioctl (desc, TIOCSETP, &sg);
+ if (!is_open)
+ {
+ error ("remote device not open");
+ }
}
+#define ON 1
+#define OFF 0
/* Read a character from the remote system, doing all the fancy
timeout stuff. */
static int
readchar ()
{
- char buf;
+ int buf;
- buf = '\0';
-#ifdef HAVE_TERMIO
- /* termio does the timeout for us. */
- read (hms_desc, &buf, 1);
-#else
- alarm (timeout);
- if (read (hms_desc, &buf, 1) < 0)
- {
- if (errno == EINTR)
- error ("Timeout reading from remote system.");
- else
- perror_with_name ("remote");
- }
- alarm (0);
-#endif
+ buf = SERIAL_READCHAR (desc, timeout);
- if (buf == '\0')
- error ("Timeout reading from remote system.");
+ if (buf == SERIAL_TIMEOUT)
+ error ("Timeout reading from remote system.");
if (!quiet)
- printf("%c",buf);
-
+ printf ("%c", buf);
+
return buf & 0x7f;
}
static int
readchar_nofail ()
{
- char buf;
+ int buf;
- buf = '\0';
-#ifdef HAVE_TERMIO
- /* termio does the timeout for us. */
- read (hms_desc, &buf, 1);
-#else
- alarm (timeout);
- if (read (hms_desc, &buf, 1) < 0)
- {
- return 0;
- }
- alarm (0);
-#endif
+ buf = SERIAL_READCHAR (desc, timeout);
+ if (buf == SERIAL_TIMEOUT)
+ buf = 0;
+ if (!quiet)
+ printf ("%c", buf);
- if (buf == '\0')
- {
- return 0;
- }
return buf & 0x7f;
+
}
-/* Keep discarding input from the remote system, until STRING is found.
+/* Keep discarding input from the remote system, until STRING is found.
Let the user break out immediately. */
static void
expect (string)
{
char *p = string;
-
immediate_quit = 1;
while (1)
{
- if (readchar() == *p)
+ if (readchar () == *p)
{
p++;
if (*p == '\0')
static void
expect_prompt ()
{
-
expect ("HMS>");
}
int ignore_space;
{
int ch;
+
while (1)
{
ch = readchar ();
}
/* Read a 32-bit hex word from the hms, preceded by a space */
-static long
-get_hex_word()
+static long
+get_hex_word ()
{
long val;
int j;
-
+
val = 0;
for (j = 0; j < 8; j++)
- val = (val << 4) + get_hex_digit (j == 0);
+ val = (val << 4) + get_hex_digit (j == 0);
return val;
}
-/* Called when SIGALRM signal sent due to alarm() timeout. */
-#ifndef HAVE_TERMIO
-
-#ifndef __STDC__
-# ifndef volatile
-# define volatile /**/
-# endif
-#endif
-volatile int n_alarms;
-
-void
-hms_timer ()
-{
- n_alarms++;
-}
-#endif
+/* Called when SIGALRM signal sent due to alarm() timeout. */
/* Number of SIGTRAPs we need to simulate. That is, the next
NEED_ARTIFICIAL_TRAP calls to hms_wait should just return
static int need_artificial_trap = 0;
void
-hms_kill(arg,from_tty)
-char *arg;
-int from_tty;
+hms_kill (arg, from_tty)
+ char *arg;
+ int from_tty;
{
}
-static check_open()
-{
- if (!OPEN(hms_desc)) {
- hms_open("",0);
- }
-}
-
/*
- * Download a file specified in 'args', to the hms.
+ * Download a file specified in 'args', to the hms.
*/
static void
-hms_load(args,fromtty)
-char *args;
-int fromtty;
+hms_load (args, fromtty)
+ char *args;
+ int fromtty;
{
- bfd *abfd;
+ bfd *abfd;
asection *s;
- int n;
- char buffer[1024];
-
- DENTER("hms_load()");
- check_open();
-
- dcache_flush();
- inferior_pid = 0;
- abfd = bfd_openr(args,"coff-h8300");
- if (!abfd)
- {
- printf_filtered("Unable to open file %s\n", args);
- return;
- }
+ int n;
+ char buffer[1024];
- if (bfd_check_format(abfd, bfd_object) ==0)
- {
- printf_filtered("File is not an object file\n");
- return ;
- }
+ check_open ();
- s = abfd->sections;
- while (s != (asection *)NULL)
- {
- if (s->flags & SEC_LOAD)
+ dcache_flush ();
+ inferior_pid = 0;
+ abfd = bfd_openr (args, gnutarget);
+ if (!abfd)
{
- int i;
+ printf_filtered ("Unable to open file %s\n", args);
+ return;
+ }
-
-#define DELTA 2048
- char *buffer = xmalloc(DELTA);
- printf_filtered("%s: %4x .. %4x ",s->name, s->vma, s->vma + s->_raw_size);
- for (i = 0; i < s->_raw_size; i+= DELTA)
- {
- int delta = DELTA;
- if (delta > s->_raw_size - i)
- delta = s->_raw_size - i ;
-
- bfd_get_section_contents(abfd, s, buffer, i, delta);
- hms_write_inferior_memory(s->vma + i, buffer, delta);
- printf_filtered("*");
- fflush(stdout);
- }
- printf_filtered( "\n");
- free(buffer);
+ if (bfd_check_format (abfd, bfd_object) == 0)
+ {
+ printf_filtered ("File is not an object file\n");
+ return;
}
- s = s->next;
- }
-
- DEXIT("hms_load()");
+ s = abfd->sections;
+ while (s != (asection *) NULL)
+ {
+ if (s->flags & SEC_LOAD)
+ {
+ int i;
+
+#define DELTA 1024
+ char *buffer = xmalloc (DELTA);
+
+ printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, s->vma, s->vma + s->_raw_size);
+ for (i = 0; i < s->_raw_size; i += DELTA)
+ {
+ int delta = DELTA;
+
+ if (delta > s->_raw_size - i)
+ delta = s->_raw_size - i;
+
+ bfd_get_section_contents (abfd, s, buffer, i, delta);
+ hms_write_inferior_memory (s->vma + i, buffer, delta);
+ printf_filtered ("*");
+ fflush (stdout);
+ }
+ printf_filtered ("\n");
+ free (buffer);
+ }
+ s = s->next;
+ }
+ sprintf (buffer, "r PC=%x", abfd->start_address);
+ hms_write_cr (buffer);
+ expect_prompt ();
}
/* This is called not only when we first attach, but also when the
char **env;
{
int entry_pt;
-
- DENTER("hms_create_inferior()");
+ char buffer[100];
if (args && *args)
- error ("Can't pass arguments to remote hms process.");
+ error ("Can't pass arguments to remote hms process.");
if (execfile == 0 || exec_bfd == 0)
- error ("No exec file specified");
+ error ("No exec file specified");
entry_pt = (int) bfd_get_start_address (exec_bfd);
- check_open();
-
- if (OPEN(hms_desc))
- {
-char buffer[100];
- hms_kill(NULL,NULL);
- hms_clear_breakpoints();
- init_wait_for_inferior ();
- /* Clear the input because what the hms sends back is different
- * depending on whether it was running or not.
- */
-/*sprintf(buffer,"g %x", entry_pt);
-
- hms_write_cr(buffer);
- */
-hms_write_cr("");
-
- expect_prompt();
-
-
- insert_breakpoints (); /* Needed to get correct instruction in cache */
- proceed(entry_pt, -1, 0);
-
-
- }
- DEXIT("hms_create_inferior()");
-}
-
-/* Translate baud rates from integers to damn B_codes. Unix should
- have outgrown this crap years ago, but even POSIX wouldn't buck it. */
-
-#ifndef B19200
-#define B19200 EXTA
-#endif
-#ifndef B38400
-#define B38400 EXTB
-#endif
+ check_open ();
-static struct {int rate, damn_b;} baudtab[] = {
- {9600, B9600},
- {19200, B19200},
- {300, B300},
- {1200, B1200},
- {2400, B2400},
- {4800, B4800},
- {-1, -1},
-};
-
-static int damn_b (rate)
- int rate;
-{
- int i;
+ hms_kill (NULL, NULL);
+ hms_clear_breakpoints ();
+ init_wait_for_inferior ();
+ hms_write_cr ("");
+ expect_prompt ();
- for (i = 0; baudtab[i].rate != -1; i++)
- if (rate == baudtab[i].rate) return baudtab[i].damn_b;
- return B19200;
+ insert_breakpoints (); /* Needed to get correct instruction in cache */
+ proceed (entry_pt, -1, 0);
}
-
/* Open a connection to a remote debugger.
NAME is the filename used for communication, then a space,
then the baud rate.
*/
static char *
-find_end_of_word(s)
-char *s;
+find_end_of_word (s)
+ char *s;
{
- while (*s && !isspace(*s))
- s++;
+ while (*s && !isspace (*s))
+ s++;
return s;
}
-static char *get_word(p)
-char **p;
+static char *
+get_word (p)
+ char **p;
{
char *s = *p;
- char *word ;
+ char *word;
char *copy;
size_t len;
- while (isspace(*s))
- s++;
+ while (isspace (*s))
+ s++;
word = s;
len = 0;
- while (*s && !isspace(*s))
- {
- s++;
- len++;
-
- }
- copy = xmalloc(len+1);
- memcpy(copy, word, len);
+ while (*s && !isspace (*s))
+ {
+ s++;
+ len++;
+
+ }
+ copy = xmalloc (len + 1);
+ memcpy (copy, word, len);
copy[len] = 0;
*p = s;
return copy;
static int baudrate = 9600;
static int
-is_baudrate_right()
+is_baudrate_right ()
{
-
+ int ok;
/* Put this port into NORMAL mode, send the 'normal' character */
- hms_write("\001", 1); /* Control A */
- hms_write("\r", 1); /* Cr */
- while ( readchar_nofail()) /* Skip noise we put there */
- ;
-
- hms_write("r");
- if (readchar_nofail() == 'r')
- return 1;
+ hms_write ("\001", 1); /* Control A */
+ hms_write ("\r", 1); /* Cr */
+
+ while (1)
+ {
+ ok = SERIAL_READCHAR (desc, timeout);
+ if (ok < 0)
+ break;
+ }
+
+ hms_write ("r", 1);
+
+ if (readchar_nofail () == 'r')
+ return 1;
/* Not the right baudrate, or the board's not on */
return 0;
-
-
}
static void
-set_rate()
+set_rate ()
{
- TERMINAL sg;
- ioctl (hms_desc, TIOCGETP, &sg);
-#ifdef HAVE_TERMIO
- sg.c_cc[VMIN] = 0; /* read with timeout. */
- sg.c_cc[VTIME] = timeout * 10;
- sg.c_lflag &= ~(ICANON | ECHO);
- sg.c_cflag = (sg.c_cflag & ~CBAUD) | damn_b (baudrate);
-#else
- sg.sg_ispeed = damn_b (baudrate);
- sg.sg_ospeed = damn_b (baudrate);
- sg.sg_flags |= RAW | ANYP;
- sg.sg_flags &= ~ECHO;
-#endif
-
- ioctl (hms_desc, TIOCSETP, &sg);
-
+ if (!SERIAL_SETBAUDRATE (desc, baudrate))
+ error ("Can't set baudrate");
}
-static void
-get_baudrate_right()
-{
-
- int which_rate = 0;
-
- while (!is_baudrate_right())
- {
- which_rate++;
-
- if (baudtab[which_rate].rate == -1)
- {
- which_rate = 0;
- }
-
-
- baudrate = baudtab[which_rate].rate;
- printf_filtered("Board not responding, trying %d baud\n",baudrate);
- QUIT;
- set_rate();
- }
-}
static void
hms_open (name, from_tty)
char *name;
int from_tty;
{
-
unsigned int prl;
char *p;
-
- DENTER("hms_open()");
- if(name == 0)
- {
- name = "";
-
- }
-
- hms_close (0);
-
- hms_desc = open (dev_name, O_RDWR);
- if (hms_desc < 0)
- perror_with_name (dev_name);
-
- set_rate();
- dcache_init();
-
-
- /* start_remote (); /* Initialize gdb process mechanisms */
+ if (name == 0)
+ {
+ name = "";
+ }
+ if (is_open)
+ hms_close (0);
+ dev_name = strdup (name);
+ if (!(desc = SERIAL_OPEN (dev_name)))
+ perror_with_name ((char *) dev_name);
-#ifndef HAVE_TERMIO
-#ifndef NO_SIGINTERRUPT
- /* Cause SIGALRM's to make reads fail with EINTR instead of resuming
- the read. */
- if (siginterrupt (SIGALRM, 1) != 0)
- perror ("hms_open: error in siginterrupt");
-#endif
+ SERIAL_RAW (desc);
+ is_open = 1;
- /* Set up read timeout timer. */
- if ((void (*)) signal (SIGALRM, hms_timer) == (void (*)) -1)
- perror ("hms_open: error in signal");
-#endif
+ dcache_init ();
- get_baudrate_right();
-
/* Hello? Are you there? */
- write (hms_desc, "\r", 1);
-
+ SERIAL_WRITE (desc, "\r", 1);
expect_prompt ();
/* Clear any break points */
- hms_clear_breakpoints();
-
+ hms_clear_breakpoints ();
- printf_filtered("Remote debugging on an H8/300 HMS via %s.\n",dev_name);
-
- DEXIT("hms_open()");
+ printf_filtered ("Connected to remote H8/300 HMS system.\n");
}
/* Close out all files and local state before this target loses control. */
hms_close (quitting)
int quitting;
{
-
- DENTER("hms_close()");
-
/* Clear any break points */
- hms_clear_breakpoints();
-
- /* Put this port back into REMOTE mode */
- if (OPEN(hms_desc)) {
-
- sleep(1); /* Let any output make it all the way back */
- write(hms_desc, "R\r", 2);
- }
-
- /* Due to a bug in Unix, fclose closes not only the stdio stream,
- but also the file descriptor. So we don't actually close
- hms_desc. */
- if (OPEN(hms_desc))
- close (hms_desc);
-
- /* Do not try to close hms_desc again, later in the program. */
-
- hms_desc = -1;
-
- DEXIT("hms_close()");
-}
-
-/* Attach to the target that is already loaded and possibly running */
-static void
-hms_attach (args, from_tty)
- char *args;
- int from_tty;
-{
-
- DENTER("hms_attach()");
-
- /* push_target(&hms_ops); /* This done in hms_open() */
-
- mark_breakpoints_out ();
-
- /* Send the hms a kill. It is ok if it is not already running */
-#if 0
- fprintf(hms_stream, "K\r");
- expect_prompt(); /* Slurp the echo */
-#endif
- /* We will get a task spawn event immediately. */
- init_wait_for_inferior ();
- clear_proceed_status ();
- stop_soon_quietly = 1;
- wait_for_inferior ();
- stop_soon_quietly = 0;
- normal_stop ();
- DEXIT("hms_attach()");
+ hms_clear_breakpoints ();
+ sleep (1); /* Let any output make it all the way back */
+ if (is_open)
+ {
+ SERIAL_WRITE (desc, "R\r", 2);
+ SERIAL_CLOSE (desc);
+ }
+ is_open = 0;
}
-
/* Terminate the open connection to the remote debugger.
Use this when you want to detach and do something else
with your gdb. */
void
-hms_detach (args,from_tty)
+hms_detach (args, from_tty)
char *args;
int from_tty;
{
- DENTER("hms_detach()");
- if (OPEN(hms_desc)) { /* Send it on its way (tell it to continue) */
- hms_clear_breakpoints();
-#if 0
- fprintf(hms_stream,"G\r");
-#endif
- }
-
- pop_target(); /* calls hms_close to do the real work */
+ if (is_open)
+ {
+ hms_clear_breakpoints ();
+ }
+
+ pop_target (); /* calls hms_close to do the real work */
if (from_tty)
printf_filtered ("Ending remote %s debugging\n", target_shortname);
- DEXIT("hms_detach()");
}
-
+
/* Tell the remote machine to resume. */
void
-hms_resume (step, sig)
- int step, sig;
+hms_resume (pid, step, sig)
+ int pid, step, sig;
{
- DENTER("hms_resume()");
- dcache_flush();
-
- if (step)
- {
- hms_write_cr("s");
- expect("Step>");
-
- /* Force the next hms_wait to return a trap. Not doing anything
+ dcache_flush ();
+
+ if (step)
+ {
+ hms_write_cr ("s");
+ expect ("Step>");
+
+ /* Force the next hms_wait to return a trap. Not doing anything
about I/O from the target means that the user has to type
"continue" to see any. FIXME, this should be fixed. */
- need_artificial_trap = 1;
- }
+ need_artificial_trap = 1;
+ }
else
- {
- hms_write_cr("g");
- expect("g");
- }
- DEXIT("hms_resume()");
+ {
+ hms_write_cr ("g");
+ expect ("g");
+ }
}
/* Wait until the remote machine stops, then return,
hms_wait (status)
WAITTYPE *status;
{
- /* Strings to look for. '?' means match any single character.
+ /* Strings to look for. '?' means match any single character.
Note that with the algorithm we use, the initial character
of the string cannot recur in the string, or we will not
find some cases of the string in the input. */
-
+
static char bpt[] = "At breakpoint:";
+
/* It would be tempting to look for "\n[__exit + 0x8]\n"
but that requires loading symbols with "yc i" and even if
we did do that we don't know that the file has symbols. */
/* Large enough for either sizeof (bpt) or sizeof (exitmsg) chars. */
char swallowed[50];
+
/* Current position in swallowed. */
char *swallowed_p = swallowed;
int old_timeout = timeout;
int old_immediate_quit = immediate_quit;
int swallowed_cr = 0;
-
- DENTER("hms_wait()");
WSETEXIT ((*status), 0);
if (need_artificial_trap != 0)
- {
- WSETSTOP ((*status), SIGTRAP);
- need_artificial_trap--;
- return 0;
- }
+ {
+ WSETSTOP ((*status), SIGTRAP);
+ need_artificial_trap--;
+ return 0;
+ }
- timeout = 0; /* Don't time out -- user program is running. */
+ timeout = -1; /* Don't time out -- user program is running. */
immediate_quit = 1; /* Helps ability to QUIT */
- while (1)
- {
- QUIT; /* Let user quit and leave process running */
- ch_handled = 0;
- ch = readchar ();
- if (ch == *bp)
- {
- bp++;
- if (*bp == '\0')
- break;
- ch_handled = 1;
-
- *swallowed_p++ = ch;
- }
- else
+ while (1)
{
- bp = bpt;
+ QUIT; /* Let user quit and leave process running */
+ ch_handled = 0;
+ ch = readchar ();
+ if (ch == *bp)
+ {
+ bp++;
+ if (*bp == '\0')
+ break;
+ ch_handled = 1;
+
+ *swallowed_p++ = ch;
+ }
+ else
+ {
+ bp = bpt;
+ }
+ if (ch == *ep || *ep == '?')
+ {
+ ep++;
+ if (*ep == '\0')
+ break;
+
+ if (!ch_handled)
+ *swallowed_p++ = ch;
+ ch_handled = 1;
+ }
+ else
+ {
+ ep = exitmsg;
+ }
+
+ if (!ch_handled)
+ {
+ char *p;
+
+ /* Print out any characters which have been swallowed. */
+ for (p = swallowed; p < swallowed_p; ++p)
+ putc (*p, stdout);
+ swallowed_p = swallowed;
+
+ if ((ch != '\r' && ch != '\n') || swallowed_cr > 10)
+ {
+ putc (ch, stdout);
+ swallowed_cr = 10;
+ }
+ swallowed_cr++;
+
+ }
}
- if (ch == *ep || *ep == '?')
+ if (*bp == '\0')
{
- ep++;
- if (*ep == '\0')
- break;
-
- if (!ch_handled)
- *swallowed_p++ = ch;
- ch_handled = 1;
- }
- else
+ WSETSTOP ((*status), SIGTRAP);
+ expect_prompt ();
+ }
+ else
{
- ep = exitmsg;
+ WSETEXIT ((*status), 0);
}
-
- if (!ch_handled) {
- char *p;
- /* Print out any characters which have been swallowed. */
- for (p = swallowed; p < swallowed_p; ++p)
- putc (*p, stdout);
- swallowed_p = swallowed;
-
-
- if ((ch != '\r' && ch != '\n') || swallowed_cr>10)
- {
- putc (ch, stdout);
- swallowed_cr = 10;
- }
- swallowed_cr ++;
-
- }
- }
- if (*bp== '\0')
- {
- WSETSTOP ((*status), SIGTRAP);
- expect_prompt();
- }
- else
- {
- WSETEXIT ((*status), 0);
- }
-
+
timeout = old_timeout;
immediate_quit = old_immediate_quit;
- DEXIT("hms_wait()");
return 0;
}
get_reg_name (regno)
int regno;
{
-static char *rn[NUM_REGS]= REGISTER_NAMES;
-
+ static char *rn[] = REGISTER_NAMES;
return rn[regno];
-
}
/* Read the remote registers. */
-static int gethex(length, start, ok)
-unsigned int length;
-char *start;
-int *ok;
+static int
+gethex (length, start, ok)
+ unsigned int length;
+ char *start;
+ int *ok;
{
int result = 0;
- while (length--)
- {
- result <<= 4 ;
- if (*start >='a' && *start <= 'f')
- {
- result += *start - 'a' + 10;
- }
- else if (*start >='A' && *start <= 'F')
- {
- result += *start - 'A' + 10;
- }
- else if (*start >='0' && *start <= '9')
+
+ while (length--)
{
- result += *start - '0' ;
+ result <<= 4;
+ if (*start >= 'a' && *start <= 'f')
+ {
+ result += *start - 'a' + 10;
+ }
+ else if (*start >= 'A' && *start <= 'F')
+ {
+ result += *start - 'A' + 10;
+ }
+ else if (*start >= '0' && *start <= '9')
+ {
+ result += *start - '0';
+ }
+ else
+ *ok = 0;
+ start++;
+
}
- else *ok = 0;
- start++;
-
- }
return result;
}
-static int
-timed_read(buf, n, timeout)
-char *buf;
+static int
+timed_read (buf, n, timeout)
+ char *buf;
{
int i;
char c;
+
i = 0;
- while (i < n)
- {
- c = readchar();
-
- if (c == 0) return i;
- buf[i] = c;
- i++;
-
- }
- return i;
+ while (i < n)
+ {
+ c = readchar ();
+
+ if (c == 0)
+ return i;
+ buf[i] = c;
+ i++;
+ }
+ return i;
}
-hms_write(a,l)
-char *a;
+
+hms_write (a, l)
+ char *a;
{
int i;
- write(hms_desc,a,l);
+
+ SERIAL_WRITE (desc, a, l);
+
if (!quiet)
- for (i = 0; i < l ; i++)
- {
- printf("%c", a[i]);
- }
+ for (i = 0; i < l; i++)
+ {
+ printf ("%c", a[i]);
+ }
}
-hms_write_cr(s)
-char *s;
+hms_write_cr (s)
+ char *s;
{
-hms_write( s, strlen(s));
-hms_write("\r",1);
+ hms_write (s, strlen (s));
+ hms_write ("\r", 1);
}
static void
-hms_fetch_registers ()
+hms_fetch_register (dummy)
+ int dummy;
{
#define REGREPLY_SIZE 79
- char linebuf[REGREPLY_SIZE+1];
+ char linebuf[REGREPLY_SIZE + 1];
int i;
- int s ;
+ int s;
int gottok;
-
+
REGISTER_TYPE reg[NUM_REGS];
int foo[8];
- check_open();
-
- do
- {
-
- hms_write_cr("r");
- s = timed_read(linebuf, REGREPLY_SIZE, 1);
-
-
- linebuf[REGREPLY_SIZE] = 0;
- gottok = 0;
- if (linebuf[0] == 'r' &&
- linebuf[3] == 'P' &&
- linebuf[4] == 'C' &&
- linebuf[5] == '=' &&
- linebuf[75] == 'H' &&
- linebuf[76] == 'M' &&
- linebuf[77] == 'S')
+
+ check_open ();
+
+ do
{
- /*
+
+ hms_write_cr ("r");
+ s = timed_read (linebuf, REGREPLY_SIZE, 1);
+
+ linebuf[REGREPLY_SIZE] = 0;
+ gottok = 0;
+ if (linebuf[0] == 'r' &&
+ linebuf[3] == 'P' &&
+ linebuf[4] == 'C' &&
+ linebuf[5] == '=' &&
+ linebuf[75] == 'H' &&
+ linebuf[76] == 'M' &&
+ linebuf[77] == 'S')
+ {
+ /*
PC=XXXX CCR=XX:XXXXXXXX R0-R7= XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
5436789012345678901234567890123456789012345678901234567890123456789012
- 0 1 2 3 4 5 6
+ 0 1 2 3 4 5 6
*/
- gottok = 1;
-
- reg[PC_REGNUM] = gethex(4,linebuf+6, &gottok);
- reg[CCR_REGNUM] = gethex(2,linebuf+15, &gottok);
- for (i = 0; i < 8; i++)
- {
- reg[i] = gethex(4, linebuf+34+5*i, &gottok);
- }
+ gottok = 1;
+
+ reg[PC_REGNUM] = gethex (4, linebuf + 6, &gottok);
+ reg[CCR_REGNUM] = gethex (2, linebuf + 15, &gottok);
+ for (i = 0; i < 8; i++)
+ {
+ reg[i] = gethex (4, linebuf + 34 + 5 * i, &gottok);
+ }
+ }
}
- }
while (!gottok);
- for (i = 0; i < NUM_REGS; i++)
- {
- supply_register (i, reg+i);
- }
-}
-
-/* Fetch register REGNO, or all registers if REGNO is -1.
- */
-static void
-hms_fetch_register (regno)
- int regno;
-{
-
- hms_fetch_registers ();
-
-}
+ for (i = 0; i < NUM_REGS; i++)
+ {
+ char swapped[2];
-/* Store the remote registers from the contents of the block REGS. */
+ swapped[1] = reg[i];
+ swapped[0] = (reg[i]) >> 8;
-static int
-hms_store_registers ()
-{
- int i;
- for (i = 0; i < NUM_REGS; i++)
- hms_store_register(i);
- return 0;
-
+ supply_register (i, swapped);
+ }
}
/* Store register REGNO, or all if REGNO == -1.
Return errno value. */
-int
+static void
hms_store_register (regno)
int regno;
{
-
- /* printf("hms_store_register() called.\n"); fflush(stdout); /* */
if (regno == -1)
- hms_store_registers ();
+ {
+ for (regno = 0; regno < NUM_REGS; regno++)
+ {
+ hms_store_register (regno);
+ }
+ }
else
- {
- char *name = get_reg_name (regno);
- char buffer[100];
- sprintf(buffer,"r %s=%x", name, read_register(regno));
- hms_write_cr(buffer);
- expect_prompt();
- }
-
- DEXIT("hms_store_registers()");
- return 0;
+ {
+ char *name = get_reg_name (regno);
+ char buffer[100];
+
+ sprintf (buffer, "r %s=%x", name, read_register (regno));
+ hms_write_cr (buffer);
+ expect_prompt ();
+ }
}
/* Get ready to modify the registers array. On machines which store
/* Do nothing, since we can store individual regs */
}
-static CORE_ADDR
-translate_addr(addr)
-CORE_ADDR addr;
+static CORE_ADDR
+translate_addr (addr)
+ CORE_ADDR addr;
{
- return(addr);
+ return (addr);
}
hms_fetch_word (addr)
CORE_ADDR addr;
{
- return dcache_fetch (addr);
+ return dcache_fetch (addr);
}
/* Write a word WORD into remote address ADDR.
CORE_ADDR addr;
int word;
{
- dcache_poke (addr, word);
+ dcache_poke (addr, word);
}
int
-hms_xfer_inferior_memory(memaddr, myaddr, len, write, target)
+hms_xfer_inferior_memory (memaddr, myaddr, len, write, target)
CORE_ADDR memaddr;
char *myaddr;
int len;
int write;
- struct target_ops *target; /* ignored */
+ struct target_ops *target; /* ignored */
{
register int i;
+
/* Round starting address down to longword boundary. */
- register CORE_ADDR addr;
+ register CORE_ADDR addr;
+
/* Round ending address up; get number of longwords that makes. */
register int count;
+
/* Allocate buffer of that many longwords. */
- register int *buffer ;
+ register int *buffer;
memaddr &= 0xffff;
- addr = memaddr & - sizeof (int);
- count = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+ addr = memaddr & -sizeof (int);
+ count = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+ buffer = (int *) alloca (count * sizeof (int));
- buffer = (int *)alloca (count * sizeof (int));
if (write)
- {
- /* Fill start and end extra bytes of buffer with existing memory data. */
+ {
+ /* Fill start and end extra bytes of buffer with existing memory data. */
- if (addr != memaddr || len < (int)sizeof (int)) {
- /* Need part of initial word -- fetch it. */
- buffer[0] = hms_fetch_word (addr);
- }
+ if (addr != memaddr || len < (int) sizeof (int))
+ {
+ /* Need part of initial word -- fetch it. */
+ buffer[0] = hms_fetch_word (addr);
+ }
- if (count > 1) /* FIXME, avoid if even boundary */
- {
- buffer[count - 1]
- = hms_fetch_word (addr + (count - 1) * sizeof (int));
- }
+ if (count > 1) /* FIXME, avoid if even boundary */
+ {
+ buffer[count - 1]
+ = hms_fetch_word (addr + (count - 1) * sizeof (int));
+ }
- /* Copy data to be written over corresponding part of buffer */
+ /* Copy data to be written over corresponding part of buffer */
- bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+ memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
- /* Write the entire buffer. */
+ /* Write the entire buffer. */
- for (i = 0; i < count; i++, addr += sizeof (int))
- {
- errno = 0;
- hms_store_word (addr, buffer[i]);
- if (errno)
- {
-
- return 0;
- }
-
+ for (i = 0; i < count; i++, addr += sizeof (int))
+ {
+ errno = 0;
+ hms_store_word (addr, buffer[i]);
+ if (errno)
+ {
+
+ return 0;
+ }
+
+ }
}
- }
else
- {
- /* Read all the longwords */
- for (i = 0; i < count; i++, addr += sizeof (int))
{
- errno = 0;
- buffer[i] = hms_fetch_word (addr);
- if (errno)
- {
- return 0;
- }
- QUIT;
- }
+ /* Read all the longwords */
+ for (i = 0; i < count; i++, addr += sizeof (int))
+ {
+ errno = 0;
+ buffer[i] = hms_fetch_word (addr);
+ if (errno)
+ {
+ return 0;
+ }
+ QUIT;
+ }
- /* Copy appropriate bytes out of the buffer. */
- bcopy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
- }
+ /* Copy appropriate bytes out of the buffer. */
+ memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+ }
-
return len;
}
-#if 0
int
-hms_xfer_inferior_memory (memaddr, myaddr, len, write)
+hms_write_inferior_memory (memaddr, myaddr, len)
CORE_ADDR memaddr;
- char *myaddr;
+ unsigned char *myaddr;
int len;
- int write;
{
- memaddr &= 0xffff;
- if (write)
- return hms_write_inferior_memory (memaddr, myaddr, len);
- else
- return hms_read_inferior_memory (memaddr, myaddr, len);
+ bfd_vma addr;
+ int done;
+ int todo;
-}
-#endif
+ done = 0;
+ while (done < len)
+ {
+ char buffer[20];
+ int thisgo;
+ int idx;
-int
-hms_write_inferior_memory (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
-{
+ thisgo = len - done;
+ if (thisgo > 20)
+ thisgo = 20;
+
+ sprintf (buffer, "M.B %4x =", memaddr + done);
+ hms_write (buffer, 10);
+ for (idx = 0; idx < thisgo; idx++)
+ {
+ char buf[20];
+
+ sprintf (buf, "%2x ", myaddr[idx + done]);
+ hms_write (buf, 3);
+ }
+ hms_write_cr ("");
+ expect_prompt ();
+ done += thisgo;
+ }
- bfd *abfd = bfd_openw(dev_name, "srec");
- asection *a;
-
- bfd_set_format(abfd, bfd_object);
- a = bfd_make_section(abfd, ".text");
- a->vma = memaddr;
- a->_raw_size = len;
- a->flags = SEC_LOAD | SEC_HAS_CONTENTS;
- hms_write_cr("tl"); /* tell hms here comes the recs */
- bfd_set_section_contents(abfd, a, myaddr, 0, len);
- bfd_close(abfd);
-
- expect_prompt();
}
void
hms_files_info ()
{
- printf_filtered("\tAttached to %s at %d baud and running program %s\n",
- dev_name, baudrate, bfd_get_filename(exec_bfd));
- printf_filtered("\ton an H8/300 processor.\n");
+ char *file = "nothing";
+
+ if (exec_bfd)
+ file = bfd_get_filename (exec_bfd);
+
+ if (exec_bfd)
+#ifdef __GO32__
+ printf_filtered ("\tAttached to DOS asynctsr and running program %s\n", file);
+#else
+ printf_filtered ("\tAttached to %s at %d baud and running program %s\n", dev_name, baudrate, file);
+#endif
+ printf_filtered ("\ton an H8/300 processor.\n");
}
/* Copy LEN bytes of data from debugger memory at MYADDR
- to inferior's memory at MEMADDR. Returns errno value.
- * sb/sh instructions don't work on unaligned addresses, when TU=1.
+ to inferior's memory at MEMADDR. Returns errno value.
+ * sb/sh instructions don't work on unaligned addresses, when TU=1.
*/
-
/* Read LEN bytes from inferior memory at MEMADDR. Put the result
at debugger address MYADDR. Returns errno value. */
int
-hms_read_inferior_memory(memaddr, myaddr, len)
+hms_read_inferior_memory (memaddr, myaddr, len)
CORE_ADDR memaddr;
char *myaddr;
int len;
{
/* Align to nearest low 16 bits */
int i;
-
+
#if 0
CORE_ADDR start = memaddr & ~0xf;
- CORE_ADDR end = ((memaddr + len +16) & ~0xf) -1;
+ CORE_ADDR end = ((memaddr + len + 16) & ~0xf) - 1;
+
#endif
CORE_ADDR start = memaddr;
- CORE_ADDR end = memaddr + len -1;
-
- int ok =1;
-
+ CORE_ADDR end = memaddr + len - 1;
+
+ int ok = 1;
+
/*
AAAA: XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX '................'
012345678901234567890123456789012345678901234567890123456789012345
0 1 2 3 4 5 6
*/
char buffer[66];
- if (memaddr & 0xf) abort();
- if (len != 16) abort();
-
- sprintf(buffer, "m %4x %4x", start & 0xffff, end & 0xffff);
- hms_write_cr(buffer);
+
+ if (memaddr & 0xf)
+ abort ();
+ if (len != 16)
+ abort ();
+
+ sprintf (buffer, "m %4x %4x", start & 0xffff, end & 0xffff);
+ hms_write_cr (buffer);
/* drop the echo and newline*/
for (i = 0; i < 13; i++)
- readchar();
-
+ readchar ();
-
/* Grab the lines as they come out and fill the area */
/* Skip over cr */
- while(1)
- {
- int p;
- int i;
- int addr;
- size_t idx;
-
- char byte[16];
- buffer[0] = readchar();
- if (buffer[0] == 'M')
- break;
- for (i = 1; i < 66; i++)
- buffer[i] = readchar();
-
- /* Now parse the line */
-
- addr = gethex(4, buffer, &ok);
- idx = 6;
- for (p = 0; p < 16; p+=2)
+ while (1)
{
- byte[p] = gethex(2, buffer + idx, &ok);
- byte[p+1] = gethex(2, buffer+ idx + 2, &ok);
- idx+=5;
-
- }
+ int p;
+ int i;
+ int addr;
+ size_t idx;
-
- for (p = 0; p<16;p++)
- {
- if (addr + p >= memaddr &&
- addr + p < memaddr + len)
- {
- myaddr[ (addr + p)-memaddr] = byte[p];
-
- }
-
+ char byte[16];
+
+ buffer[0] = readchar ();
+ if (buffer[0] == 'M')
+ break;
+ for (i = 1; i < 66; i++)
+ buffer[i] = readchar ();
+
+ /* Now parse the line */
+
+ addr = gethex (4, buffer, &ok);
+ idx = 6;
+ for (p = 0; p < 16; p += 2)
+ {
+ byte[p] = gethex (2, buffer + idx, &ok);
+ byte[p + 1] = gethex (2, buffer + idx + 2, &ok);
+ idx += 5;
+
+ }
+
+ for (p = 0; p < 16; p++)
+ {
+ if (addr + p >= memaddr &&
+ addr + p < memaddr + len)
+ {
+ myaddr[(addr + p) - memaddr] = byte[p];
+
+ }
+
+ }
}
- }
-
-
-
- hms_write_cr(" ");
- expect_prompt();
-
-
-
-
+ expect ("emory>");
+ hms_write_cr (" ");
+ expect_prompt ();
return len;
-
}
/* This routine is run as a hook, just before the main command loop is
char ttyname[100];
char *p, *p2;
extern FILE *instream;
- extern jmp_buf to_top_level;
push_target (&hms_ops);
-#if 0
-
- while (current_target != &hms_ops) {
- /* remote tty not specified yet */
- if ( instream == stdin ){
- printf("\nEnter device and filename, or \"quit\" to quit: ");
- fflush( stdout );
- }
- fgets( ttyname, sizeof(ttyname)-1, stdin );
-
- if ( !strcmp("quit", ttyname) ){
- exit(1);
- }
-
- hms_open( ttyname, 1 );
-
- /* Now that we have a tty open for talking to the remote machine,
- download the executable file if one was specified. */
- if ( !setjmp(to_top_level) && exec_bfd ) {
- target_load (bfd_get_filename (exec_bfd), 1);
- }
- }
-#endif
}
-
#define MAX_BREAKS 16
-static int num_brkpts=0;
+static int num_brkpts = 0;
static int
-hms_insert_breakpoint(addr, save)
-CORE_ADDR addr;
-char *save; /* Throw away, let hms save instructions */
+hms_insert_breakpoint (addr, save)
+ CORE_ADDR addr;
+ char *save; /* Throw away, let hms save instructions */
{
+ check_open ();
- DENTER("hms_insert_breakpoint()");
- check_open();
-
- if (num_brkpts < MAX_BREAKS) {
+ if (num_brkpts < MAX_BREAKS)
+ {
char buffer[100];
+
num_brkpts++;
- sprintf(buffer,"b %x", addr & 0xffff);
- hms_write_cr(buffer);
+ sprintf (buffer, "b %x", addr & 0xffff);
+ hms_write_cr (buffer);
expect_prompt ();
- DEXIT("hms_insert_breakpoint() success");
- return(0); /* Success */
- } else {
- fprintf_filtered(stderr,
- "Too many break points, break point not installed\n");
- DEXIT("hms_insert_breakpoint() failure");
- return(1); /* Failure */
- }
-
+ return (0);
+ }
+ else
+ {
+ fprintf_filtered (stderr,
+ "Too many break points, break point not installed\n");
+ return (1);
+ }
}
static int
-hms_remove_breakpoint(addr, save)
-CORE_ADDR addr;
-char *save; /* Throw away, let hms save instructions */
+hms_remove_breakpoint (addr, save)
+ CORE_ADDR addr;
+ char *save; /* Throw away, let hms save instructions */
{
- DENTER("hms_remove_breakpoint()");
- if (num_brkpts > 0) {
+ if (num_brkpts > 0)
+ {
char buffer[100];
-
+
num_brkpts--;
- sprintf(buffer,"b - %x", addr & 0xffff);
- hms_write_cr(buffer);
- expect_prompt();
-
+ sprintf (buffer, "b - %x", addr & 0xffff);
+ hms_write_cr (buffer);
+ expect_prompt ();
+
}
- DEXIT("hms_remove_breakpoint()");
- return(0);
+ return (0);
}
/* Clear the hmss notion of what the break points are */
static int
-hms_clear_breakpoints()
-{
+hms_clear_breakpoints ()
+{
- DENTER("hms_clear_breakpoint()");
- if (OPEN(hms_desc)) {
- hms_write_cr("b -");
+ if (is_open)
+ {
+ hms_write_cr ("b -");
expect_prompt ();
}
num_brkpts = 0;
-
- DEXIT("hms_clear_breakpoint()");
}
static void
-hms_mourn()
-{
- DENTER("hms_mourn()");
- hms_clear_breakpoints();
-/* pop_target (); /* Pop back to no-child state */
- generic_mourn_inferior ();
- DEXIT("hms_mourn()");
-}
-
-/* Display everthing we read in from the hms until we match/see the
- * specified string
- */
-static int
-display_until(str)
-char *str;
+hms_mourn ()
{
- int i=0,j,c;
-
- while (c=readchar()) {
- if (c==str[i]) {
- i++;
- if (i == strlen(str)) return;
- } else {
- if (i) {
- for (j=0 ; j<i ; j++) /* Put everthing we matched */
- putchar(str[j]);
- i=0;
- }
- putchar(c);
- }
- }
-
+ hms_clear_breakpoints ();
+ unpush_target (&hms_ops);
+ generic_mourn_inferior ();
}
-
/* Put a command string, in args, out to the hms. The hms is assumed to
- be in raw mode, all writing/reading done through hms_desc.
+ be in raw mode, all writing/reading done through desc.
Ouput from the hms is placed on the users terminal until the
prompt from the hms is seen.
FIXME: Can't handle commands that take input. */
void
hms_com (args, fromtty)
- char *args;
- int fromtty;
+ char *args;
+ int fromtty;
{
- check_open();
-
- if (!args) return;
-
- /* Clear all input so only command relative output is displayed */
+ check_open ();
+ if (!args)
+ return;
- hms_write_cr(args);
- hms_write("\030",1);
- expect_prompt();
+ /* Clear all input so only command relative output is displayed */
+ hms_write_cr (args);
+ hms_write ("\030", 1);
+ expect_prompt ();
}
/* Define the target subroutine names */
-struct target_ops hms_ops = {
- "hms", "Remote HMS monitor",
-"Use the H8 evaluation board running the HMS monitor connected\n\
+struct target_ops hms_ops =
+{
+ "hms", "Remote HMS monitor",
+ "Use the H8 evaluation board running the HMS monitor connected\n\
by a serial line.",
- hms_open, hms_close,
- hms_attach, hms_detach, hms_resume, hms_wait,
- hms_fetch_register, hms_store_register,
- hms_prepare_to_store, 0, 0, /* conv_to, conv_from */
- hms_xfer_inferior_memory,
- hms_files_info,
- hms_insert_breakpoint, hms_remove_breakpoint, /* Breakpoints */
- 0, 0, 0, 0, 0, /* Terminal handling */
- hms_kill, /* FIXME, kill */
- hms_load,
- 0, /* lookup_symbol */
- hms_create_inferior, /* create_inferior */
- hms_mourn, /* mourn_inferior FIXME */
- process_stratum, 0, /* next */
- 1, 1, 1, 1, 1, /* all mem, mem, stack, regs, exec */
- 0,0, /* Section pointers */
- OPS_MAGIC, /* Always the last thing */
+ hms_open, hms_close,
+ 0, hms_detach, hms_resume, hms_wait, /* attach */
+ hms_fetch_register, hms_store_register,
+ hms_prepare_to_store,
+ hms_xfer_inferior_memory,
+ hms_files_info,
+ hms_insert_breakpoint, hms_remove_breakpoint, /* Breakpoints */
+ 0, 0, 0, 0, 0, /* Terminal handling */
+ hms_kill, /* FIXME, kill */
+ hms_load,
+ 0, /* lookup_symbol */
+ hms_create_inferior, /* create_inferior */
+ hms_mourn, /* mourn_inferior FIXME */
+ 0, /* can_run */
+ 0, /* notice_signals */
+ process_stratum, 0, /* next */
+ 1, 1, 1, 1, 1, /* all mem, mem, stack, regs, exec */
+ 0, 0, /* Section pointers */
+ OPS_MAGIC, /* Always the last thing */
};
-
-hms_quiet()
+hms_quiet ()
{
- quiet = ! quiet;
+ quiet = !quiet;
+ if (quiet)
+ printf_filtered ("Snoop disabled\n");
+ else
+ printf_filtered ("Snoop enabled\n");
+
}
-hms_device(s)
-char *s;
+hms_device (s)
+ char *s;
{
- if (s) {
- dev_name = get_word(&s);
- }
+ if (s)
+ {
+ dev_name = get_word (&s);
+ }
}
-static
-hms_speed(s)
-char *s;
+static
+hms_speed (s)
+ char *s;
{
-check_open();
+ check_open ();
-
- if (s)
- {
- char buffer[100];
- int newrate = atoi(s);
- int which = 0;
- while (baudtab[which].rate != newrate)
+ if (s)
{
- if (baudtab[which].rate == -1)
- {
- error("Can't use %d baud\n", newrate);
- }
- which++;
+ char buffer[100];
+ int newrate = atoi (s);
+ int which = 0;
+
+ if (SERIAL_SETBAUDRATE (desc, newrate))
+ error ("Can't use %d baud\n", newrate);
+
+ printf_filtered ("Checking target is in sync\n");
+
+ printf_filtered ("Sending commands to set target to %d\n",
+ baudrate);
+
+ sprintf (buffer, "tm %d. N 8 1", baudrate);
+ hms_write_cr (buffer);
}
-
- printf_filtered("Checking target is in sync\n");
-
- get_baudrate_right();
- baudrate = newrate;
- printf_filtered("Sending commands to set target to %d\n",
- baudrate);
-
- sprintf(buffer, "tm %d. N 8 1", baudrate);
- hms_write_cr(buffer);
- }
}
/***********************************************************************/
_initialize_remote_hms ()
{
add_target (&hms_ops);
+
add_com ("hms <command>", class_obscure, hms_com,
- "Send a command to the HMS monitor.");
+ "Send a command to the HMS monitor.");
add_com ("snoop", class_obscure, hms_quiet,
"Show what commands are going to the monitor");
+
add_com ("device", class_obscure, hms_device,
"Set the terminal line for HMS communications");
add_com ("speed", class_obscure, hms_speed,
"Set the terminal line speed for HMS communications");
-
-}
-
+ dev_name = NULL;
+}