(display_debug_lines, case DW_LNS_const_add_pc): Multiply adv by info.li_min_insn_length.
[deliverable/binutils-gdb.git] / gdb / remote-hms.c
index 216e35eb7f7429c4b1b1a37da9b55f6532c7f1b6..328fc01965c4173426a55710e379df9bdb1b7c6b 100644 (file)
@@ -17,7 +17,8 @@
 
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+   Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
 #include "defs.h"
 #include "gdbcore.h"
@@ -26,7 +27,6 @@
 #include "serial.h"
 
 static void hms_open PARAMS ((char *args, int from_tty));
-
 static void
 hms_supply_register (regname, regnamelen, val, vallen)
      char *regname;
@@ -83,63 +83,58 @@ static char *hms_inits[] =
 {"\003",                       /* Resets the prompt, and clears repeated cmds */
  NULL};
 
-static struct monitor_ops hms_cmds =
+static struct monitor_ops hms_cmds;
+
+static void
+init_hms_cmds (void)
 {
-  MO_CLR_BREAK_USES_ADDR | MO_FILL_USES_ADDR | MO_GETMEM_NEEDS_RANGE,
-  hms_inits,                   /* Init strings */
-  "g\r",                       /* continue command */
-  "s\r",                       /* single step */
-  "\003",                      /* ^C interrupts the program */
-  "b %x\r",                    /* set a breakpoint */
-  "b - %x\r",                  /* clear a breakpoint */
-  "b -\r",                     /* clear all breakpoints */
-  "f %x %x %x\r",              /* fill (start end val) */
-  {
-    "m.b %x=%x\r",             /* setmem.cmdb (addr, value) */
-    "m.w %x=%x\r",             /* setmem.cmdw (addr, value) */
-    NULL,                      /* setmem.cmdl (addr, value) */
-    NULL,                      /* setmem.cmdll (addr, value) */
-    NULL,                      /* setreg.resp_delim */
-    NULL,                      /* setreg.term */
-    NULL,                      /* setreg.term_cmd */
-  },
-  {
-    "m.b %x %x\r",             /* getmem.cmdb (addr, addr) */
-    "m.w %x %x\r",             /* getmem.cmdw (addr, addr) */
-    NULL,                      /* getmem.cmdl (addr, addr) */
-    NULL,                      /* getmem.cmdll (addr, addr) */
-    ": ",                      /* getmem.resp_delim */
-    ">",                       /* getmem.term */
-    "\003",                    /* getmem.term_cmd */
-  },
-  {
-    "\003r %s=%x\r",           /* setreg.cmd (name, value) */
-    NULL,                      /* setreg.resp_delim */
-    NULL,                      /* setreg.term */
-    NULL                       /* setreg.term_cmd */
-  },
-  {
-    "r %s\r",                  /* getreg.cmd (name) */
-    " (",                      /* getreg.resp_delim */
-    "):",                      /* getreg.term */
-    "\003",                    /* getreg.term_cmd */
-  },
-  "r\r",                       /* dump_registers */
-  "\\(\\w+\\)=\\([0-9a-fA-F]+\\)",     /* register_pattern */
-  hms_supply_register,         /* supply_register */
-  NULL,                                /* load_routine (defaults to SRECs) */
-  "tl\r",                      /* download command */
-  NULL,                                /* load response */
-  ">",                         /* monitor command prompt */
-  NULL,                                /* end-of-command delimitor */
-  NULL,                                /* optional command terminator */
-  &hms_ops,                    /* target operations */
-  SERIAL_1_STOPBITS,           /* number of stop bits */
-  hms_regnames,                        /* registers names */
-  MONITOR_OPS_MAGIC            /* magic */
-};
+  hms_cmds.flags = MO_CLR_BREAK_USES_ADDR | MO_FILL_USES_ADDR | MO_GETMEM_NEEDS_RANGE;
+  hms_cmds.init = hms_inits;   /* Init strings */
+  hms_cmds.cont = "g\r";       /* continue command */
+  hms_cmds.step = "s\r";       /* single step */
+  hms_cmds.stop = "\003";      /* ^C interrupts the program */
+  hms_cmds.set_break = "b %x\r";       /* set a breakpoint */
+  hms_cmds.clr_break = "b - %x\r";     /* clear a breakpoint */
+  hms_cmds.clr_all_break = "b -\r";    /* clear all breakpoints */
+  hms_cmds.fill = "f %x %x %x\r";      /* fill (start end val) */
+  hms_cmds.setmem.cmdb = "m.b %x=%x\r";                /* setmem.cmdb (addr, value) */
+  hms_cmds.setmem.cmdw = "m.w %x=%x\r";                /* setmem.cmdw (addr, value) */
+  hms_cmds.setmem.cmdl = NULL; /* setmem.cmdl (addr, value) */
+  hms_cmds.setmem.cmdll = NULL;        /* setmem.cmdll (addr, value) */
+  hms_cmds.setmem.resp_delim = NULL;   /* setreg.resp_delim */
+  hms_cmds.setmem.term = NULL; /* setreg.term */
+  hms_cmds.setmem.term_cmd = NULL;     /* setreg.term_cmd */
+  hms_cmds.getmem.cmdb = "m.b %x %x\r";                /* getmem.cmdb (addr, addr) */
+  hms_cmds.getmem.cmdw = "m.w %x %x\r";                /* getmem.cmdw (addr, addr) */
+  hms_cmds.getmem.cmdl = NULL; /* getmem.cmdl (addr, addr) */
+  hms_cmds.getmem.cmdll = NULL;        /* getmem.cmdll (addr, addr) */
+  hms_cmds.getmem.resp_delim = ": ";   /* getmem.resp_delim */
+  hms_cmds.getmem.term = ">";  /* getmem.term */
+  hms_cmds.getmem.term_cmd = "\003";   /* getmem.term_cmd */
+  hms_cmds.setreg.cmd = "r %s=%x\r";   /* setreg.cmd (name, value) */
+  hms_cmds.setreg.resp_delim = NULL;   /* setreg.resp_delim */
+  hms_cmds.setreg.term = NULL; /* setreg.term */
+  hms_cmds.setreg.term_cmd = NULL;     /* setreg.term_cmd */
+  hms_cmds.getreg.cmd = "r %s\r";      /* getreg.cmd (name) */
+  hms_cmds.getreg.resp_delim = " (";   /* getreg.resp_delim */
+  hms_cmds.getreg.term = ":";  /* getreg.term */
+  hms_cmds.getreg.term_cmd = "\003";   /* getreg.term_cmd */
+  hms_cmds.dump_registers = "r\r";     /* dump_registers */
+  hms_cmds.register_pattern = "\\(\\w+\\)=\\([0-9a-fA-F]+\\)"; /* register_pattern */
+  hms_cmds.supply_register = hms_supply_register;      /* supply_register */
+  hms_cmds.load_routine = NULL;        /* load_routine (defaults to SRECs) */
+  hms_cmds.load = "tl\r";      /* download command */
+  hms_cmds.loadresp = NULL;    /* load response */
+  hms_cmds.prompt = ">";       /* monitor command prompt */
+  hms_cmds.line_term = "\r";   /* end-of-command delimitor */
+  hms_cmds.cmd_end = NULL;     /* optional command terminator */
+  hms_cmds.target = &hms_ops;  /* target operations */
+  hms_cmds.stopbits = SERIAL_1_STOPBITS;       /* number of stop bits */
+  hms_cmds.regnames = hms_regnames;    /* registers names */
+  hms_cmds.magic = MONITOR_OPS_MAGIC;  /* magic */
+}                              /* init_hms-cmds */
 
-void
+static void
 hms_open (args, from_tty)
      char *args;
      int from_tty;
@@ -147,11 +142,12 @@ hms_open (args, from_tty)
   monitor_open (args, &hms_cmds, from_tty);
 }
 
-
 int write_dos_tick_delay;
+
 void
 _initialize_remote_hms ()
 {
+  init_hms_cmds ();
   init_monitor_ops (&hms_ops);
 
   hms_ops.to_shortname = "hms";
@@ -164,8 +160,6 @@ Specify the serial device it is connected to (e.g. /dev/ttya).";
   add_target (&hms_ops);
 }
 
-
-
 #if 0
 /* This is kept here because we used to support the H8/500 in this module,
    and I haven't done the H8/500 yet */
@@ -173,7 +167,7 @@ Specify the serial device it is connected to (e.g. /dev/ttya).";
 #include "inferior.h"
 #include "wait.h"
 #include "value.h"
-#include <string.h>
+#include "gdb_string.h"
 #include <ctype.h>
 #include <fcntl.h>
 #include <signal.h>
@@ -203,9 +197,6 @@ static void remove_commands ();
 
 static int quiet = 1;          /* FIXME - can be removed after Dec '94 */
 
-DCACHE *dcache_ptr;
-int remote_dcache;
-serial_t desc;
 
 
 /***********************************************************************
@@ -423,7 +414,7 @@ hms_create_inferior (execfile, args, env)
     error ("Can't pass arguments to remote hms process.");
 
   if (execfile == 0 || exec_bfd == 0)
-    error ("No exec file specified");
+    error ("No executable file specified");
 
   entry_pt = (int) bfd_get_start_address (exec_bfd);
   check_open ();
@@ -533,7 +524,6 @@ hms_close (quitting)
       SERIAL_CLOSE (desc);
     }
   is_open = 0;
-  remote_dcache = 0;
 }
 
 /* Terminate the open connection to the remote debugger.  Use this
@@ -562,8 +552,6 @@ hms_resume (pid, step, sig)
      enum target_signal
        sig;
 {
-  dcache_flush (dcache_ptr);
-
   if (step)
     {
       hms_write_cr ("s");
@@ -931,7 +919,7 @@ hms_fetch_register (dummy)
   int s;
   int gottok;
 
-  unsigned LONGEST reg[NUM_REGS];
+  ULONGEST reg[NUM_REGS];
 
   check_open ();
 
@@ -1035,26 +1023,6 @@ translate_addr (addr)
 
 }
 
-/* Read a word from remote address ADDR and return it.
- * This goes through the data cache.
- */
-int
-hms_fetch_word (addr)
-     CORE_ADDR addr;
-{
-  return dcache_fetch (dcache_ptr, addr);
-}
-
-/* Write a word WORD into remote address ADDR.
-   This goes through the data cache.  */
-
-void
-hms_store_word (addr, word)
-     CORE_ADDR addr;
-     int word;
-{
-  dcache_poke (dcache_ptr, addr, word);
-}
 
 int
 hms_xfer_inferior_memory (memaddr, myaddr, len, write, target)
@@ -1064,73 +1032,6 @@ hms_xfer_inferior_memory (memaddr, myaddr, len, write, target)
      int write;
      struct target_ops *target;        /* ignored */
 {
-  register int i;
-
-  /* Round starting address down to longword boundary.  */
-  register CORE_ADDR addr;
-
-  /* Round ending address up; get number of longwords that makes.  */
-  register int count;
-
-  /* Allocate buffer of that many longwords.  */
-  register int *buffer;
-
-  memaddr &= 0xffff;
-  addr = memaddr & -sizeof (int);
-  count = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
-
-  buffer = (int *) alloca (count * sizeof (int));
-
-  if (write)
-    {
-      /* Fill start and end extra bytes of buffer with existing memory data.  */
-
-      if (addr != memaddr || len < (int) sizeof (int))
-       {
-         /* Need part of initial word -- fetch it.  */
-         buffer[0] = hms_fetch_word (addr);
-       }
-
-      if (count > 1)           /* FIXME, avoid if even boundary */
-       {
-         buffer[count - 1]
-           = hms_fetch_word (addr + (count - 1) * sizeof (int));
-       }
-
-      /* Copy data to be written over corresponding part of buffer */
-
-      memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
-
-      /* Write the entire buffer.  */
-
-      for (i = 0; i < count; i++, addr += sizeof (int))
-       {
-         errno = 0;
-         hms_store_word (addr, buffer[i]);
-         if (errno)
-           {
-             return 0;
-           }
-
-       }
-    }
-  else
-    {
-      /* Read all the longwords */
-      for (i = 0; i < count; i++, addr += sizeof (int))
-       {
-         errno = 0;
-         buffer[i] = hms_fetch_word (addr);
-         if (errno)
-           {
-             return 0;
-           }
-         QUIT;
-       }
-
-      /* Copy appropriate bytes out of the buffer.  */
-      memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
-    }
 
   return len;
 }
@@ -1421,32 +1322,75 @@ hms_open (name, from_tty)
 
 /* Define the target subroutine names */
 
-struct target_ops hms_ops =
+struct target_ops hms_ops;
+
+static void
+init_hms_ops (void)
 {
-  "hms", "Remote HMS monitor",
-  "Use the H8 evaluation board running the HMS monitor connected\n\
-by a serial line.",
-
-  hms_open, hms_close,
-  0, hms_detach, hms_resume, hms_wait, /* attach */
-  hms_fetch_register, hms_store_register,
-  hms_prepare_to_store,
-  hms_xfer_inferior_memory,
-  hms_files_info,
-  hms_insert_breakpoint, hms_remove_breakpoint,                /* Breakpoints */
-  0, 0, 0, 0, 0,               /* Terminal handling */
-  hms_kill,                    /* FIXME, kill */
-  gr_load_image,
-  0,                           /* lookup_symbol */
-  hms_create_inferior,         /* create_inferior */
-  hms_mourn,                   /* mourn_inferior FIXME */
-  0,                           /* can_run */
-  0,                           /* notice_signals */
-  0,                           /* to_stop */
-  process_stratum, 0,          /* next */
-  1, 1, 1, 1, 1,               /* all mem, mem, stack, regs, exec */
-  0, 0,                                /* Section pointers */
-  OPS_MAGIC,                   /* Always the last thing */
+  hms_ops.to_shortname = "hms";
+  hms_ops.to_longname = "Remote HMS monitor";
+  hms_ops.to_doc = "Use the H8 evaluation board running the HMS monitor connected\n\
+by a serial line.";
+  hms_ops.to_open = hms_open;
+  hms_ops.to_close = hms_close;
+  hms_ops.to_attach = 0;
+  hms_ops.to_post_attach = NULL;
+  hms_ops.to_require_attach = NULL;
+  hms_ops.to_detach = hms_detach;
+  hms_ops.to_require_detach = NULL;
+  hms_ops.to_resume = hms_resume;
+  hms_ops.to_wait = hms_wait;
+  hms_ops.to_post_wait = NULL;
+  hms_ops.to_fetch_registers = hms_fetch_register;
+  hms_ops.to_store_registers = hms_store_register;
+  hms_ops.to_prepare_to_store = hms_prepare_to_store;
+  hms_ops.to_xfer_memory = hms_xfer_inferior_memory;
+  hms_ops.to_files_info = hms_files_info;
+  hms_ops.to_insert_breakpoint = hms_insert_breakpoint;
+  hms_ops.to_remove_breakpoint = hms_remove_breakpoint;
+  hms_ops.to_terminal_init = 0;
+  hms_ops.to_terminal_inferior = 0;
+  hms_ops.to_terminal_ours_for_output = 0;
+  hms_ops.to_terminal_ours = 0;
+  hms_ops.to_terminal_info = 0;
+  hms_ops.to_kill = hms_kill;
+  hms_ops.to_load = generic_load;
+  hms_ops.to_lookup_symbol = 0;
+  hms_ops.to_create_inferior = hms_create_inferior;
+  hms_ops.to_post_startup_inferior = NULL;
+  hms_ops.to_acknowledge_created_inferior = NULL;
+  hms_ops.to_clone_and_follow_inferior = NULL;
+  hms_ops.to_post_follow_inferior_by_clone = NULL;
+  hms_ops.to_insert_fork_catchpoint = NULL;
+  hms_ops.to_remove_fork_catchpoint = NULL;
+  hms_ops.to_insert_vfork_catchpoint = NULL;
+  hms_ops.to_remove_vfork_catchpoint = NULL;
+  hms_ops.to_has_forked = NULL;
+  hms_ops.to_has_vforked = NULL;
+  hms_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  hms_ops.to_post_follow_vfork = NULL;
+  hms_ops.to_insert_exec_catchpoint = NULL;
+  hms_ops.to_remove_exec_catchpoint = NULL;
+  hms_ops.to_has_execd = NULL;
+  hms_ops.to_reported_exec_events_per_exec_call = NULL;
+  hms_ops.to_has_exited = NULL;
+  hms_ops.to_mourn_inferior = hms_mourn;
+  hms_ops.to_can_run = 0;
+  hms_ops.to_notice_signals = 0;
+  hms_ops.to_thread_alive = 0;
+  hms_ops.to_stop = 0;
+  hms_ops.to_pid_to_exec_file = NULL;
+  hms_ops.to_core_file_to_sym_file = NULL;
+  hms_ops.to_stratum = process_stratum;
+  hms_ops.DONT_USE = 0;
+  hms_ops.to_has_all_memory = 1;
+  hms_ops.to_has_memory = 1;
+  hms_ops.to_has_stack = 1;
+  hms_ops.to_has_registers = 1;
+  hms_ops.to_has_execution = 1;
+  hms_ops.to_sections = 0;
+  hms_ops.to_sections_end = 0;
+  hms_ops.to_magic = OPS_MAGIC;
 };
 
 hms_quiet ()                   /* FIXME - this routine can be removed after Dec '94 */
@@ -1535,6 +1479,7 @@ remove_commands ()
 void
 _initialize_remote_hms ()
 {
+  init_hms_ops ();
   add_target (&hms_ops);
 
   add_com ("hms <command>", class_obscure, hms_com,
@@ -1553,4 +1498,3 @@ _initialize_remote_hms ()
   dev_name = NULL;
 }
 #endif
-
This page took 0.029822 seconds and 4 git commands to generate.