#include "serial.h"
static void hms_open PARAMS ((char *args, int from_tty));
-
static void
hms_supply_register (regname, regnamelen, val, vallen)
char *regname;
{"\003", /* Resets the prompt, and clears repeated cmds */
NULL};
-static struct monitor_ops hms_cmds =
+static struct monitor_ops hms_cmds ;
+
+static void
+init_hms_cmds(void)
{
- MO_CLR_BREAK_USES_ADDR | MO_FILL_USES_ADDR | MO_GETMEM_NEEDS_RANGE,
- hms_inits, /* Init strings */
- "g\r", /* continue command */
- "s\r", /* single step */
- "\003", /* ^C interrupts the program */
- "b %x\r", /* set a breakpoint */
- "b - %x\r", /* clear a breakpoint */
- "b -\r", /* clear all breakpoints */
- "f %x %x %x\r", /* fill (start end val) */
- {
- "m.b %x=%x\r", /* setmem.cmdb (addr, value) */
- "m.w %x=%x\r", /* setmem.cmdw (addr, value) */
- NULL, /* setmem.cmdl (addr, value) */
- NULL, /* setmem.cmdll (addr, value) */
- NULL, /* setreg.resp_delim */
- NULL, /* setreg.term */
- NULL, /* setreg.term_cmd */
- },
- {
- "m.b %x %x\r", /* getmem.cmdb (addr, addr) */
- "m.w %x %x\r", /* getmem.cmdw (addr, addr) */
- NULL, /* getmem.cmdl (addr, addr) */
- NULL, /* getmem.cmdll (addr, addr) */
- ": ", /* getmem.resp_delim */
- ">", /* getmem.term */
- "\003", /* getmem.term_cmd */
- },
- {
- "r %s=%x\r", /* setreg.cmd (name, value) */
- NULL, /* setreg.resp_delim */
- NULL, /* setreg.term */
- NULL /* setreg.term_cmd */
- },
- {
- "r %s\r", /* getreg.cmd (name) */
- " (", /* getreg.resp_delim */
- ":", /* getreg.term */
- "\003", /* getreg.term_cmd */
- },
- "r\r", /* dump_registers */
- "\\(\\w+\\)=\\([0-9a-fA-F]+\\)", /* register_pattern */
- hms_supply_register, /* supply_register */
- NULL, /* load_routine (defaults to SRECs) */
- "tl\r", /* download command */
- NULL, /* load response */
- ">", /* monitor command prompt */
- "\r", /* end-of-command delimitor */
- NULL, /* optional command terminator */
- &hms_ops, /* target operations */
- SERIAL_1_STOPBITS, /* number of stop bits */
- hms_regnames, /* registers names */
- MONITOR_OPS_MAGIC /* magic */
-};
+ hms_cmds.flags = MO_CLR_BREAK_USES_ADDR | MO_FILL_USES_ADDR | MO_GETMEM_NEEDS_RANGE;
+ hms_cmds.init = hms_inits; /* Init strings */
+ hms_cmds.cont = "g\r"; /* continue command */
+ hms_cmds.step = "s\r"; /* single step */
+ hms_cmds.stop = "\003"; /* ^C interrupts the program */
+ hms_cmds.set_break = "b %x\r"; /* set a breakpoint */
+ hms_cmds.clr_break = "b - %x\r"; /* clear a breakpoint */
+ hms_cmds.clr_all_break = "b -\r"; /* clear all breakpoints */
+ hms_cmds.fill = "f %x %x %x\r"; /* fill (start end val) */
+ hms_cmds.setmem.cmdb = "m.b %x=%x\r"; /* setmem.cmdb (addr, value) */
+ hms_cmds.setmem.cmdw = "m.w %x=%x\r"; /* setmem.cmdw (addr, value) */
+ hms_cmds.setmem.cmdl = NULL; /* setmem.cmdl (addr, value) */
+ hms_cmds.setmem.cmdll = NULL; /* setmem.cmdll (addr, value) */
+ hms_cmds.setmem.resp_delim = NULL;/* setreg.resp_delim */
+ hms_cmds.setmem.term = NULL; /* setreg.term */
+ hms_cmds.setmem.term_cmd = NULL; /* setreg.term_cmd */
+ hms_cmds.getmem.cmdb = "m.b %x %x\r"; /* getmem.cmdb (addr, addr) */
+ hms_cmds.getmem.cmdw = "m.w %x %x\r"; /* getmem.cmdw (addr, addr) */
+ hms_cmds.getmem.cmdl = NULL; /* getmem.cmdl (addr, addr) */
+ hms_cmds.getmem.cmdll = NULL; /* getmem.cmdll (addr, addr) */
+ hms_cmds.getmem.resp_delim = ": ";/* getmem.resp_delim */
+ hms_cmds.getmem.term = ">"; /* getmem.term */
+ hms_cmds.getmem.term_cmd = "\003";/* getmem.term_cmd */
+ hms_cmds.setreg.cmd = "r %s=%x\r";/* setreg.cmd (name, value) */
+ hms_cmds.setreg.resp_delim = NULL;/* setreg.resp_delim */
+ hms_cmds.setreg.term = NULL; /* setreg.term */
+ hms_cmds.setreg.term_cmd = NULL; /* setreg.term_cmd */
+ hms_cmds.getreg.cmd = "r %s\r"; /* getreg.cmd (name) */
+ hms_cmds.getreg.resp_delim = " (";/* getreg.resp_delim */
+ hms_cmds.getreg.term = ":"; /* getreg.term */
+ hms_cmds.getreg.term_cmd = "\003";/* getreg.term_cmd */
+ hms_cmds.dump_registers = "r\r"; /* dump_registers */
+ hms_cmds.register_pattern = "\\(\\w+\\)=\\([0-9a-fA-F]+\\)"; /* register_pattern */
+ hms_cmds.supply_register = hms_supply_register; /* supply_register */
+ hms_cmds.load_routine = NULL; /* load_routine (defaults to SRECs) */
+ hms_cmds.load = "tl\r"; /* download command */
+ hms_cmds.loadresp = NULL; /* load response */
+ hms_cmds.prompt = ">"; /* monitor command prompt */
+ hms_cmds.line_term = "\r"; /* end-of-command delimitor */
+ hms_cmds.cmd_end = NULL; /* optional command terminator */
+ hms_cmds.target = &hms_ops; /* target operations */
+ hms_cmds.stopbits = SERIAL_1_STOPBITS;/* number of stop bits */
+ hms_cmds.regnames = hms_regnames; /* registers names */
+ hms_cmds.magic = MONITOR_OPS_MAGIC; /* magic */
+} /* init_hms-cmds */
static void
hms_open (args, from_tty)
void
_initialize_remote_hms ()
{
+ init_hms_cmds() ;
init_monitor_ops (&hms_ops);
hms_ops.to_shortname = "hms";
add_target (&hms_ops);
}
-
#if 0
/* This is kept here because we used to support the H8/500 in this module,
and I haven't done the H8/500 yet */
error ("Can't pass arguments to remote hms process.");
if (execfile == 0 || exec_bfd == 0)
- error ("No exec file specified");
+ error ("No executable file specified");
entry_pt = (int) bfd_get_start_address (exec_bfd);
check_open ();
int s;
int gottok;
- unsigned LONGEST reg[NUM_REGS];
+ ULONGEST reg[NUM_REGS];
check_open ();
/* Define the target subroutine names */
-struct target_ops hms_ops =
+struct target_ops hms_ops ;
+
+static void
+init_hms_ops(void)
{
- "hms", "Remote HMS monitor",
- "Use the H8 evaluation board running the HMS monitor connected\n\
-by a serial line.",
-
- hms_open, hms_close,
- 0, hms_detach, hms_resume, hms_wait, /* attach */
- hms_fetch_register, hms_store_register,
- hms_prepare_to_store,
- hms_xfer_inferior_memory,
- hms_files_info,
- hms_insert_breakpoint, hms_remove_breakpoint, /* Breakpoints */
- 0, 0, 0, 0, 0, /* Terminal handling */
- hms_kill, /* FIXME, kill */
- generic_load,
- 0, /* lookup_symbol */
- hms_create_inferior, /* create_inferior */
- hms_mourn, /* mourn_inferior FIXME */
- 0, /* can_run */
- 0, /* notice_signals */
- 0, /* to_stop */
- process_stratum, 0, /* next */
- 1, 1, 1, 1, 1, /* all mem, mem, stack, regs, exec */
- 0, 0, /* Section pointers */
- OPS_MAGIC, /* Always the last thing */
+ hms_ops.to_shortname = "hms";
+ hms_ops.to_longname = "Remote HMS monitor";
+ hms_ops.to_doc = "Use the H8 evaluation board running the HMS monitor connected\n\
+by a serial line.";
+ hms_ops.to_open = hms_open;
+ hms_ops.to_close = hms_close;
+ hms_ops.to_attach = 0;
+ hms_ops.to_post_attach = NULL;
+ hms_ops.to_require_attach = NULL;
+ hms_ops.to_detach = hms_detach;
+ hms_ops.to_require_detach = NULL;
+ hms_ops.to_resume = hms_resume;
+ hms_ops.to_wait = hms_wait;
+ hms_ops.to_post_wait = NULL;
+ hms_ops.to_fetch_registers = hms_fetch_register;
+ hms_ops.to_store_registers = hms_store_register;
+ hms_ops.to_prepare_to_store = hms_prepare_to_store;
+ hms_ops.to_xfer_memory = hms_xfer_inferior_memory;
+ hms_ops.to_files_info = hms_files_info;
+ hms_ops.to_insert_breakpoint = hms_insert_breakpoint;
+ hms_ops.to_remove_breakpoint = hms_remove_breakpoint;
+ hms_ops.to_terminal_init = 0;
+ hms_ops.to_terminal_inferior = 0;
+ hms_ops.to_terminal_ours_for_output = 0;
+ hms_ops.to_terminal_ours = 0;
+ hms_ops.to_terminal_info = 0;
+ hms_ops.to_kill = hms_kill;
+ hms_ops.to_load = generic_load;
+ hms_ops.to_lookup_symbol = 0;
+ hms_ops.to_create_inferior = hms_create_inferior;
+ hms_ops.to_post_startup_inferior = NULL;
+ hms_ops.to_acknowledge_created_inferior = NULL;
+ hms_ops.to_clone_and_follow_inferior = NULL;
+ hms_ops.to_post_follow_inferior_by_clone = NULL;
+ hms_ops.to_insert_fork_catchpoint = NULL;
+ hms_ops.to_remove_fork_catchpoint = NULL;
+ hms_ops.to_insert_vfork_catchpoint = NULL;
+ hms_ops.to_remove_vfork_catchpoint = NULL;
+ hms_ops.to_has_forked = NULL;
+ hms_ops.to_has_vforked = NULL;
+ hms_ops.to_can_follow_vfork_prior_to_exec = NULL;
+ hms_ops.to_post_follow_vfork = NULL;
+ hms_ops.to_insert_exec_catchpoint = NULL;
+ hms_ops.to_remove_exec_catchpoint = NULL;
+ hms_ops.to_has_execd = NULL;
+ hms_ops.to_reported_exec_events_per_exec_call = NULL;
+ hms_ops.to_has_exited = NULL;
+ hms_ops.to_mourn_inferior = hms_mourn;
+ hms_ops.to_can_run = 0;
+ hms_ops.to_notice_signals = 0;
+ hms_ops.to_thread_alive = 0;
+ hms_ops.to_stop = 0;
+ hms_ops.to_pid_to_exec_file = NULL;
+ hms_ops.to_core_file_to_sym_file = NULL;
+ hms_ops.to_stratum = process_stratum;
+ hms_ops.DONT_USE = 0;
+ hms_ops.to_has_all_memory = 1;
+ hms_ops.to_has_memory = 1;
+ hms_ops.to_has_stack = 1;
+ hms_ops.to_has_registers = 1;
+ hms_ops.to_has_execution = 1;
+ hms_ops.to_sections = 0;
+ hms_ops.to_sections_end = 0;
+ hms_ops.to_magic = OPS_MAGIC;
};
hms_quiet () /* FIXME - this routine can be removed after Dec '94 */
void
_initialize_remote_hms ()
{
+ init_hms_ops() ;
add_target (&hms_ops);
add_com ("hms <command>", class_obscure, hms_com,
projects / deliverable / binutils-gdb.git / blobdiff