static int mips_map_regno (struct gdbarch *, int);
+static void mips_set_register (int regno, ULONGEST value);
+
static void mips_prepare_to_store (struct regcache *regcache);
-static unsigned int mips_fetch_word (CORE_ADDR addr);
+static int mips_fetch_word (CORE_ADDR addr, unsigned int *valp);
static int mips_store_word (CORE_ADDR addr, unsigned int value,
int *old_contents);
extern struct target_ops mips_ops;
extern struct target_ops pmon_ops;
extern struct target_ops ddb_ops;
+extern struct target_ops rockhopper_ops;
\f/* *INDENT-OFF* */
/* The MIPS remote debugging interface is built on top of a simple
packet protocol. Each packet is organized as follows:
These are initialized with code in _initialize_remote_mips instead
of static initializers, to make it easier to extend the target_ops
vector later. */
-struct target_ops mips_ops, pmon_ops, ddb_ops, lsi_ops;
+struct target_ops mips_ops, pmon_ops, ddb_ops, rockhopper_ops, lsi_ops;
enum mips_monitor_type
{
MON_PMON, /* 3.0.83 [COGENT,EB,FP,NET] Algorithmics Ltd. Nov 9 1995 17:19:50 */
MON_DDB, /* 2.7.473 [DDBVR4300,EL,FP,NET] Risq Modular Systems, Thu Jun 6 09:28:40 PDT 1996 */
MON_LSI, /* 4.3.12 [EB,FP], LSI LOGIC Corp. Tue Feb 25 13:22:14 1997 */
+ MON_ROCKHOPPER,
/* Last and unused value, for sizing vectors, etc. */
MON_LAST
};
inferior_ptid. */
static ptid_t remote_mips_ptid;
+/* Close any ports which might be open. Reset certain globals indicating
+ the state of those ports. */
+
static void
close_ports (void)
{
}
+/* Read P as a hex value. Return true if every character made sense,
+ storing the result in *RESULT. Leave *RESULT unchanged otherwise. */
+
+static int
+read_hex_value (const char *p, ULONGEST *result)
+{
+ ULONGEST retval;
+
+ retval = 0;
+ while (*p != 0)
+ {
+ retval <<= 4;
+ if (*p >= '0' && *p <= '9')
+ retval |= *p - '0';
+ else if (*p >= 'A' && *p <= 'F')
+ retval |= *p - 'A' + 10;
+ else if (*p >= 'a' && *p <= 'f')
+ retval |= *p - 'a' + 10;
+ else
+ return 0;
+ p++;
+ }
+ *result = retval;
+ return 1;
+}
+
+
/* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if
timed out. TIMEOUT specifies timeout value in seconds.
*/
{
int addr_size = gdbarch_addr_bit (target_gdbarch) / 8;
char myBuff[DATA_MAXLEN + 1];
+ char response_string[17];
int len;
int rpid;
char rcmd;
int rerrflg;
- unsigned long rresponse;
+ ULONGEST rresponse;
if (buff == (char *) NULL)
buff = myBuff;
if (mips_need_reply)
internal_error (__FILE__, __LINE__,
_("mips_request: Trying to send command before reply"));
- sprintf (buff, "0x0 %c 0x%s 0x%s", cmd,
- phex_nz (addr, addr_size), phex_nz (data, addr_size));
+ /* 'T' sets a register to a 64-bit value, so make sure we use
+ the right conversion function. */
+ if (cmd == 'T')
+ sprintf (buff, "0x0 %c 0x%s 0x%s", cmd,
+ phex_nz (addr, addr_size), phex_nz (data, 8));
+ else
+ sprintf (buff, "0x0 %c 0x%s 0x%s", cmd,
+ phex_nz (addr, addr_size), phex_nz (data, addr_size));
+
mips_send_packet (buff, 1);
mips_need_reply = 1;
}
len = mips_receive_packet (buff, 1, timeout);
buff[len] = '\0';
- if (sscanf (buff, "0x%x %c 0x%x 0x%lx",
- &rpid, &rcmd, &rerrflg, &rresponse) != 4
+ if (sscanf (buff, "0x%x %c 0x%x 0x%16s",
+ &rpid, &rcmd, &rerrflg, response_string) != 4
+ || !read_hex_value (response_string, &rresponse)
|| (cmd != '\0' && rcmd != cmd))
mips_error ("Bad response from remote board");
return rresponse;
}
+/* Cleanup associated with mips_initialize(). */
+
static void
mips_initialize_cleanups (void *arg)
{
mips_initializing = 0;
}
+/* Cleanup associated with mips_exit_debug(). */
+
static void
mips_exit_cleanups (void *arg)
{
mips_exiting = 0;
}
+/* Send a command and wait for that command to be echoed back. Wait,
+ too, for the following prompt. */
+
static void
mips_send_command (const char *cmd, int prompt)
{
}
/* Enter remote (dbx) debug mode: */
+
static void
mips_enter_debug (void)
{
}
/* Exit remote (dbx) debug mode, returning to the monitor prompt: */
+
static int
mips_exit_debug (void)
{
mips_exiting = 1;
- if (mips_monitor != MON_IDT)
+ if (mips_monitor != MON_IDT && mips_monitor != MON_ROCKHOPPER)
{
/* The DDB (NEC) and MiniRISC (LSI) versions of PMON exit immediately,
so we do not get a reply to this command: */
}
/* Open a connection to the remote board. */
+
static void
common_open (struct target_ops *ops, char *name, int from_tty,
enum mips_monitor_type new_monitor,
xfree (serial_port_name);
}
+/* Open a connection to an IDT board. */
+
static void
mips_open (char *name, int from_tty)
{
common_open (&mips_ops, name, from_tty, MON_IDT, monitor_prompt);
}
+/* Open a connection to a PMON board. */
+
static void
pmon_open (char *name, int from_tty)
{
common_open (&pmon_ops, name, from_tty, MON_PMON, "PMON> ");
}
+/* Open a connection to a DDB board. */
+
static void
ddb_open (char *name, int from_tty)
{
common_open (&ddb_ops, name, from_tty, MON_DDB, "NEC010>");
}
+/* Open a connection to a rockhopper board. */
+
+static void
+rockhopper_open (char *name, int from_tty)
+{
+ common_open (&rockhopper_ops, name, from_tty, MON_ROCKHOPPER, "NEC01>");
+}
+
+/* Open a connection to an LSI board. */
+
static void
lsi_open (char *name, int from_tty)
{
/* Return the signal corresponding to SIG, where SIG is the number which
the MIPS protocol uses for the signal. */
+
static enum target_signal
mips_signal_from_protocol (int sig)
{
return (enum target_signal) sig;
}
+/* Set the register designated by REGNO to the value designated by VALUE. */
+
+static void
+mips_set_register (int regno, ULONGEST value)
+{
+ char buf[MAX_REGISTER_SIZE];
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+
+ /* We got the number the register holds, but gdb expects to see a
+ value in the target byte ordering. */
+
+ if (mips_monitor != MON_ROCKHOPPER
+ && (regno == mips_regnum (gdbarch)->pc || regno < 32))
+ /* Some 64-bit boards have monitors that only send the bottom 32 bits.
+ In such cases we can only really debug 32-bit code properly so,
+ when reading a GPR or the PC, assume that the full 64-bit
+ value is the sign extension of the lower 32 bits. */
+ store_signed_integer (buf, register_size (gdbarch, regno), byte_order,
+ value);
+ else
+ store_unsigned_integer (buf, register_size (gdbarch, regno), byte_order,
+ value);
+
+ regcache_raw_supply (regcache, regno, buf);
+}
+
/* Wait until the remote stops, and return a wait status. */
static ptid_t
int rstatus;
int err;
char buff[DATA_MAXLEN];
- int rpc, rfp, rsp;
- char flags[20];
+ ULONGEST rpc, rfp, rsp;
+ char pc_string[17], fp_string[17], sp_string[17], flags[20];
int nfields;
int i;
/* See if we got back extended status. If so, pick out the pc, fp, sp, etc... */
- nfields = sscanf (buff, "0x%*x %*c 0x%*x 0x%*x 0x%x 0x%x 0x%x 0x%*x %s",
- &rpc, &rfp, &rsp, flags);
- if (nfields >= 3)
+ nfields = sscanf (buff, "0x%*x %*c 0x%*x 0x%*x 0x%16s 0x%16s 0x%16s 0x%*x %s",
+ pc_string, fp_string, sp_string, flags);
+ if (nfields >= 3
+ && read_hex_value (pc_string, &rpc)
+ && read_hex_value (fp_string, &rfp)
+ && read_hex_value (sp_string, &rsp))
{
struct regcache *regcache = get_current_regcache ();
struct gdbarch *gdbarch = get_regcache_arch (regcache);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- char buf[MAX_REGISTER_SIZE];
-
- store_unsigned_integer
- (buf, register_size (gdbarch, gdbarch_pc_regnum (gdbarch)),
- byte_order, rpc);
- regcache_raw_supply (regcache, gdbarch_pc_regnum (gdbarch), buf);
-
- store_unsigned_integer
- (buf, register_size (gdbarch, gdbarch_pc_regnum (gdbarch)),
- byte_order, rfp);
- regcache_raw_supply (regcache, 30, buf); /* This register they are avoiding and so it is unnamed */
-
- store_unsigned_integer
- (buf, register_size (gdbarch, gdbarch_sp_regnum (gdbarch)),
- byte_order, rsp);
- regcache_raw_supply (regcache, gdbarch_sp_regnum (gdbarch), buf);
-
- store_unsigned_integer
- (buf, register_size (gdbarch, gdbarch_deprecated_fp_regnum (gdbarch)),
- byte_order, 0);
- regcache_raw_supply (regcache,
- gdbarch_deprecated_fp_regnum (gdbarch), buf);
+
+ mips_set_register (gdbarch_pc_regnum (gdbarch), rpc);
+ mips_set_register (30, rfp);
+ mips_set_register (gdbarch_sp_regnum (gdbarch), rsp);
if (nfields == 9)
{
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- unsigned LONGEST val;
+ ULONGEST val;
int err;
if (regno == -1)
/* Unfortunately the PMON version in the Vr4300 board has been
compiled without the 64bit register access commands. This
means we cannot get hold of the full register width. */
- if (mips_monitor == MON_DDB)
- val = (unsigned) mips_request ('t', pmon_reg, 0,
- &err, mips_receive_wait, NULL);
+ if (mips_monitor == MON_DDB || mips_monitor == MON_ROCKHOPPER)
+ val = mips_request ('t', pmon_reg, 0,
+ &err, mips_receive_wait, NULL);
else
val = mips_request ('r', pmon_reg, 0,
&err, mips_receive_wait, NULL);
}
}
- {
- char buf[MAX_REGISTER_SIZE];
-
- /* We got the number the register holds, but gdb expects to see a
- value in the target byte ordering. */
- store_unsigned_integer (buf, register_size (gdbarch, regno),
- byte_order, val);
- regcache_raw_supply (regcache, regno, buf);
- }
+ mips_set_register (regno, val);
}
/* Prepare to store registers. The MIPS protocol can store individual
}
regcache_cooked_read_unsigned (regcache, regno, &val);
- mips_request ('R', mips_map_regno (gdbarch, regno), val,
+ mips_request (mips_monitor == MON_ROCKHOPPER ? 'T' : 'R',
+ mips_map_regno (gdbarch, regno),
+ val,
&err, mips_receive_wait, NULL);
if (err)
mips_error ("Can't write register %d: %s", regno, safe_strerror (errno));
}
-/* Fetch a word from the target board. */
+/* Fetch a word from the target board. Return word fetched in location
+ addressed by VALP. Return 0 when successful; return positive error
+ code when not. */
-static unsigned int
-mips_fetch_word (CORE_ADDR addr)
+static int
+mips_fetch_word (CORE_ADDR addr, unsigned int *valp)
{
- unsigned int val;
int err;
- val = mips_request ('d', addr, 0, &err, mips_receive_wait, NULL);
+ *valp = mips_request ('d', addr, 0, &err, mips_receive_wait, NULL);
if (err)
{
/* Data space failed; try instruction space. */
- val = mips_request ('i', addr, 0, &err,
- mips_receive_wait, NULL);
- if (err)
- mips_error ("Can't read address %s: %s",
- paddress (target_gdbarch, addr), safe_strerror (errno));
+ *valp = mips_request ('i', addr, 0, &err,
+ mips_receive_wait, NULL);
}
- return val;
+ return err;
}
/* Store a word to the target board. Returns errno code or zero for
/* Fill start and end extra bytes of buffer with existing data. */
if (addr != memaddr || len < 4)
{
+ unsigned int val;
+
+ if (mips_fetch_word (addr, &val))
+ return 0;
+
/* Need part of initial word -- fetch it. */
- store_unsigned_integer (&buffer[0], 4, byte_order,
- mips_fetch_word (addr));
+ store_unsigned_integer (&buffer[0], 4, byte_order, val);
}
if (count > 1)
{
+ unsigned int val;
+
/* Need part of last word -- fetch it. FIXME: we do this even
if we don't need it. */
- store_unsigned_integer (&buffer[(count - 1) * 4], 4, byte_order,
- mips_fetch_word (addr + (count - 1) * 4));
+ if (mips_fetch_word (addr + (count - 1) * 4, &val))
+ return 0;
+
+ store_unsigned_integer (&buffer[(count - 1) * 4], 4, byte_order, val);
}
/* Copy data to be written over corresponding part of buffer */
/* Read all the longwords */
for (i = 0; i < count; i++, addr += 4)
{
- store_unsigned_integer (&buffer[i * 4], 4, byte_order,
- mips_fetch_word (addr));
+ unsigned int val;
+
+ if (mips_fetch_word (addr, &val))
+ return 0;
+
+ store_unsigned_integer (&buffer[i * 4], 4, byte_order, val);
QUIT;
}
return memory_insert_breakpoint (gdbarch, bp_tgt);
}
+/* Remove a breakpoint. */
+
static int
mips_remove_breakpoint (struct gdbarch *gdbarch,
struct bp_target_info *bp_tgt)
return 0;
}
+/* Remove a watchpoint. */
+
int
mips_remove_watchpoint (CORE_ADDR addr, int len, int type)
{
return 0;
}
+/* Test to see if a watchpoint has been hit. Return 1 if so; return 0,
+ if not. */
+
int
mips_stopped_by_watchpoint (void)
{
mips_check_lsi_error (CORE_ADDR addr, int rerrflg)
{
struct lsi_error *err;
- char *saddr = paddress (target_gdbarch, addr);
+ const char *saddr = paddress (target_gdbarch, addr);
if (rerrflg == 0) /* no error */
return 0;
return 0;
}
\f
+/* Send one S record as specified by SREC of length LEN, starting
+ at ADDR. Note, however, that ADDR is not used except to provide
+ a useful message to the user in the event that a NACK is received
+ from the board. */
+
static void
send_srec (char *srec, int len, CORE_ADDR addr)
{
at a time (range 0..63). Keep a checksum if required (passed
pointer non-NULL). The function returns the number of encoded
characters written into the buffer. */
+
static int
pmon_makeb64 (unsigned long v, char *p, int n, int *chksum)
{
/* Shorthand function (that could be in-lined) to output the zero-fill
escape sequence into the data stream. */
+
static int
pmon_zeroset (int recsize, char **buff, int *amount, unsigned int *chksum)
{
return (recsize + count + 2);
}
+/* Add the checksum specified by *VALUE to end of the record under
+ construction. *BUF specifies the location at which to begin
+ writing characters comprising the checksum information. RECSIZE
+ specifies the size of the record constructed thus far. (A trailing
+ NUL character may be present in the buffer holding the record, but
+ the record size does not include this character.)
+
+ Return the total size of the record after adding the checksum escape,
+ the checksum itself, and the trailing newline.
+
+ The checksum specified by *VALUE is zeroed out prior to returning.
+ Additionally, *BUF is updated to refer to the location just beyond
+ the record elements added by this call. */
+
static int
pmon_checkset (int recsize, char **buff, int *value)
{
/* NOTE: This constant depends on the monitor being used. This value
is for PMON 5.x on the Cogent Vr4300 board. */
+/* Create a FastLoad format record.
+
+ *OUTBUF is the buffer into which a FastLoad formatted record is
+ written. On return, the pointer position represented by *OUTBUF
+ is updated to point at the end of the data, i.e. the next position
+ in the buffer that may be written. No attempt is made to NUL-
+ terminate this portion of the record written to the buffer.
+
+ INBUF contains the binary input data from which the FastLoad
+ formatted record will be built. *INPTR is an index into this
+ buffer. *INPTR is updated as the input is consumed. Thus, on
+ return, the caller has access to the position of the next input
+ byte yet to be processed. INAMOUNT is the size, in bytes, of the
+ input data.
+
+ *RECSIZE will be written with the size of the record written to the
+ output buffer prior to returning. This size does not include a
+ NUL-termination byte as none is written to the output buffer.
+
+ *CSUM is the output buffer checksum. It is updated as data is
+ written to the output buffer.
+
+ *ZEROFILL is the current number of 3-byte zero sequences that have
+ been encountered. It is both an input and an output to this
+ function. */
+
static void
pmon_make_fastrec (char **outbuf, unsigned char *inbuf, int *inptr,
int inamount, int *recsize, unsigned int *csum,
return;
}
+/* Attempt to read an ACK. If an ACK is not read in a timely manner,
+ output the message specified by MESG. Return -1 for failure, 0
+ for success. */
+
static int
pmon_check_ack (char *mesg)
{
}
}
+/* Look for the string specified by STRING sent from the target board
+ during a download operation. If the string in question is not
+ seen, output an error message, remove the temporary file, if
+ appropriate, and return 0. Otherwise, return 1 to indicate
+ success. */
+
static int
mips_expect_download (char *string)
{
return 1;
}
+/* Look for messages from the target board associated with the entry
+ address.
+
+ NOTE: This function doesn't indicate success or failure, so we
+ have no way to determine whether or not the output from the board
+ was correctly seen. However, given that other items are checked
+ after this, it seems unlikely that those checks will pass if this
+ check doesn't first (silently) pass. */
+
static void
pmon_check_entry_address (char *entry_address, int final)
{
mips_expect ("\r\n");
}
+/* Look for messages from the target board showing the total number of
+ bytes downloaded to the board. Output 1 for success if the tail
+ end of the message was read correctly, 0 otherwise. */
+
static int
pmon_check_total (int bintotal)
{
return mips_expect_download (" bytes\r\n");
}
+/* Look for the termination messages associated with the end of
+ a download to the board.
+
+ Also, when `tftp_in_use' is set, issue the load command to the
+ board causing the file to be transferred. (This is done prior
+ to looking for the above mentioned termination messages.) */
+
static void
pmon_end_download (int final, int bintotal)
{
chmod (tftp_localname, stbuf.st_mode | S_IROTH);
/* Must reinitialize the board to prevent PMON from crashing. */
- mips_send_command ("initEther\r", -1);
+ if (mips_monitor != MON_ROCKHOPPER)
+ mips_send_command ("initEther\r", -1);
/* Send the load command. */
cmd = xmalloc (strlen (load_cmd_prefix) + strlen (tftp_name) + 2);
if (!pmon_check_total (bintotal))
return;
break;
+ case MON_ROCKHOPPER:
+ if (!pmon_check_total (bintotal))
+ return;
+ pmon_check_entry_address ("Entry Address = ", final);
+ break;
default:
pmon_check_entry_address ("Entry Address = ", final);
pmon_check_ack ("termination");
remove (tftp_localname); /* Remove temporary file */
}
+/* Write the buffer specified by BUFFER of length LENGTH to either
+ the board or the temporary file that'll eventually be transferred
+ to the board. */
+
static void
pmon_download (char *buffer, int length)
{
serial_write (udp_in_use ? udp_desc : mips_desc, buffer, length);
}
+/* Open object or executable file, FILE, and send it to the board
+ using the FastLoad format. */
+
static void
pmon_load_fast (char *file)
{
\f
extern initialize_file_ftype _initialize_remote_mips; /* -Wmissing-prototypes */
+/* Initialize mips_ops, lsi_ops, ddb_ops, pmon_ops, and rockhopper_ops.
+ Create target specific commands and perform other initializations
+ specific to this file. */
+
void
_initialize_remote_mips (void)
{
mips_ops.to_magic = OPS_MAGIC;
/* Copy the common fields to all four target vectors. */
- pmon_ops = ddb_ops = lsi_ops = mips_ops;
+ rockhopper_ops = pmon_ops = ddb_ops = lsi_ops = mips_ops;
/* Initialize target-specific fields in the target vectors. */
mips_ops.to_shortname = "mips";
ddb_ops.to_open = ddb_open;
ddb_ops.to_wait = mips_wait;
+ rockhopper_ops.to_shortname = "rockhopper";
+ rockhopper_ops.to_doc = ddb_ops.to_doc;
+ rockhopper_ops.to_open = rockhopper_open;
+ rockhopper_ops.to_wait = mips_wait;
+
lsi_ops.to_shortname = "lsi";
lsi_ops.to_doc = pmon_ops.to_doc;
lsi_ops.to_open = lsi_open;
add_target (&pmon_ops);
add_target (&ddb_ops);
add_target (&lsi_ops);
+ add_target (&rockhopper_ops);
add_setshow_zinteger_cmd ("timeout", no_class, &mips_receive_wait, _("\
Set timeout in seconds for remote MIPS serial I/O."), _("\
projects / deliverable / binutils-gdb.git / blobdiff